In the existing code, when using the regset section iteration functions, the
size parameter is used in different ways.
With collect, size is used to create the buffer in which to write the regset.
(see linux-tdep.c::linux_collect_regset_section_cb).
With supply, size is used to confirm the existing regset is the correct size.
If REGSET_VARIABLE_SIZE is set then the regset can be bigger than size.
Effectively, size is the minimum possible size of the regset.
(see corelow.c::get_core_register_section).
There are currently no targets with both REGSET_VARIABLE_SIZE and a collect
function.
In SVE, a corefile can contain one of two formats after the header, both of
which are different sizes. However, when writing a core file, we always want
to write out the full bigger size.
To allow support of collects for REGSET_VARIABLE_SIZE we need two sizes.
This is done by adding supply_size and collect_size.
gdb/
* aarch64-fbsd-tdep.c
(aarch64_fbsd_iterate_over_regset_sections): Add supply_size and
collect_size.
* aarch64-linux-tdep.c
(aarch64_linux_iterate_over_regset_sections): Likewise.
* alpha-linux-tdep.c
(alpha_linux_iterate_over_regset_sections):
* alpha-nbsd-tdep.c
(alphanbsd_iterate_over_regset_sections): Likewise.
* amd64-fbsd-tdep.c
(amd64fbsd_iterate_over_regset_sections): Likewise.
* amd64-linux-tdep.c
(amd64_linux_iterate_over_regset_sections): Likewise.
* arm-bsd-tdep.c
(armbsd_iterate_over_regset_sections): Likewise.
* arm-fbsd-tdep.c
(arm_fbsd_iterate_over_regset_sections): Likewise.
* arm-linux-tdep.c
(arm_linux_iterate_over_regset_sections): Likewise.
* corelow.c (get_core_registers_cb): Likewise.
(core_target::fetch_registers): Likewise.
* fbsd-tdep.c (fbsd_collect_regset_section_cb): Likewise.
* frv-linux-tdep.c (frv_linux_iterate_over_regset_sections): Likewise.
* gdbarch.h (void): Regenerate.
* gdbarch.sh: Add supply_size and collect_size.
* hppa-linux-tdep.c (hppa_linux_iterate_over_regset_sections): Likewise.
* hppa-nbsd-tdep.c (hppanbsd_iterate_over_regset_sections): Likewise.
* hppa-obsd-tdep.c (hppaobsd_iterate_over_regset_sections): Likewise.
* i386-fbsd-tdep.c (i386fbsd_iterate_over_regset_sections): Likewise.
* i386-linux-tdep.c (i386_linux_iterate_over_regset_sections): Likewise.
* i386-tdep.c (i386_iterate_over_regset_sections): Likewise.
* ia64-linux-tdep.c (ia64_linux_iterate_over_regset_sections): Likewise.
* linux-tdep.c (linux_collect_regset_section_cb): Likewise.
* m32r-linux-tdep.c (m32r_linux_iterate_over_regset_sections): Likewise.
* m68k-bsd-tdep.c (m68kbsd_iterate_over_regset_sections): Likewise.
* m68k-linux-tdep.c (m68k_linux_iterate_over_regset_sections): Likewise.
* mips-fbsd-tdep.c (mips_fbsd_iterate_over_regset_sections): Likewise.
* mips-linux-tdep.c (mips_linux_iterate_over_regset_sections): Likewise.
* mips-nbsd-tdep.c (mipsnbsd_iterate_over_regset_sections): Likewise.
* mips64-obsd-tdep.c (mips64obsd_iterate_over_regset_sections): Likewise.
* mn10300-linux-tdep.c (am33_iterate_over_regset_sections): Likewise.
* nios2-linux-tdep.c (nios2_iterate_over_regset_sections): Likewise.
* ppc-fbsd-tdep.c (ppcfbsd_iterate_over_regset_sections): Likewise.
* ppc-linux-tdep.c (ppc_linux_iterate_over_regset_sections): Likewise.
* ppc-nbsd-tdep.c (ppcnbsd_iterate_over_regset_sections): Likewise.
* ppc-obsd-tdep.c (ppcobsd_iterate_over_regset_sections): Likewise.
* riscv-linux-tdep.c (riscv_linux_iterate_over_regset_sections): Likewise.
* rs6000-aix-tdep.c (rs6000_aix_iterate_over_regset_sections): Likewise.
* s390-linux-tdep.c (s390_iterate_over_regset_sections): Likewise.
* score-tdep.c (score7_linux_iterate_over_regset_sections): Likewise.
* sh-tdep.c (sh_iterate_over_regset_sections): Likewise.
* sparc-tdep.c (sparc_iterate_over_regset_sections): Likewise.
* tilegx-linux-tdep.c (tilegx_iterate_over_regset_sections): Likewise.
* vax-tdep.c (vax_iterate_over_regset_sections): Likewise.
* xtensa-tdep.c (xtensa_iterate_over_regset_sections): Likewise.
Remove regcache_raw_write, update all callers to use regcache::raw_write
instead.
gdb/ChangeLog:
* regcache.h (regcache_raw_write): Remove, update callers to use
regcache::raw_write instead.
* regcache.c (regcache_raw_write): Remove.
Remove regcache_raw_read, update all callers to use
readable_regcache::raw_read instead.
gdb/ChangeLog:
* regcache.h (regcache_raw_read): Remove, update callers to use
readable_regcache::raw_read instead.
* regcache.c (regcache_raw_read): Remove.
This adds a fall-through comment in i386-tdep.c. I was not sure what
to do here, so I elected to preserve the status quo. In review, John
Baldwin pointed out that: "I believe this is correct based on the diff
that added the special cases for xgetbv and xsetbv as previously ldgt
and lidt were treated the same".
gdb/ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
* i386-tdep.c (i386_process_record): Add fall-through comment.
This removes the long_long_align_bit gdbarch attribute in favor of
type_align. This uncovered two possible issues.
First, arc-tdep.c claimed that long long alignment was 32 bits, but as
discussed on the list, ARC has a maximum alignment of 32 bits, so I've
added an arc_type_align function to account for this.
Second, jit.c, the sole user of long_long_align_bit, was confusing
"long long" with uint64_t. The relevant structure is defined in the
JIT API part of the manual as:
struct jit_code_entry
{
struct jit_code_entry *next_entry;
struct jit_code_entry *prev_entry;
const char *symfile_addr;
uint64_t symfile_size;
};
I've changed this code to use uint64_t.
2018-04-30 Tom Tromey <tom@tromey.com>
* jit.c (jit_read_code_entry): Use type_align.
* i386-tdep.c (i386_gdbarch_init): Don't call
set_gdbarch_long_long_align_bit.
* gdbarch.sh: Remove long_long_align_bit.
* gdbarch.c, gdbarch.h: Rebuild.
* arc-tdep.c (arc_type_align): New function.
(arc_gdbarch_init): Use arc_type_align. Don't call
set_gdbarch_long_long_align_bit.
This adds some basic type alignment support to gdb. It changes struct
type to store the alignment, and updates dwarf2read.c to handle
DW_AT_alignment. It also adds a new gdbarch method and updates
i386-tdep.c.
None of this new functionality is used anywhere yet, so tests will
wait until the next patch.
2018-04-30 Tom Tromey <tom@tromey.com>
* i386-tdep.c (i386_type_align): New function.
(i386_gdbarch_init): Update.
* gdbarch.sh (type_align): New method.
* gdbarch.c, gdbarch.h: Rebuild.
* arch-utils.h (default_type_align): Declare.
* arch-utils.c (default_type_align): New function.
* gdbtypes.h (TYPE_ALIGN_BITS): New define.
(struct type) <align_log2>: New field.
<instance_flags>: Now a bitfield.
(TYPE_RAW_ALIGN): New macro.
(type_align, type_raw_align, set_type_align): Declare.
* gdbtypes.c (type_align, type_raw_align, set_type_align): New
functions.
* dwarf2read.c (quirk_rust_enum): Set type alignment.
(get_alignment, maybe_set_alignment): New functions.
(read_structure_type, read_enumeration_type, read_array_type)
(read_set_type, read_tag_pointer_type, read_tag_reference_type)
(read_subrange_type, read_base_type): Set type alignment.
With version 7.3 GCC supports new options
-mindirect-branch=<choice>
-mfunction-return=<choice>
The choices are:
keep behaves as before
thunk jumps through a thunk
thunk-external jumps through an external thunk
thunk-inline jumps through an inlined thunk
For thunk and thunk-external, GDB would, on a call to the thunk, step into
the thunk and then resume to its caller assuming that this is an
undebuggable function. On a return thunk, GDB would stop inside the
thunk.
Make GDB step through such thunks instead.
Before:
Temporary breakpoint 1, main ()
at gdb.base/step-indirect-call-thunk.c:37
37 x = apply (inc, 41);
(gdb) s
apply (op=0x80483e6 <inc>, x=41)
at gdb.base/step-indirect-call-thunk.c:29
29 return op (x);
(gdb)
30 }
After:
Temporary breakpoint 1, main ()
at gdb.base/step-indirect-call-thunk.c:37
37 x = apply (inc, 41);
(gdb) s
apply (op=0x80483e6 <inc>, x=41)
at gdb.base/step-indirect-call-thunk.c:29
29 return op (x);
(gdb)
inc (x=41) at gdb.base/step-indirect-call-thunk.c:23
23 return x + 1;
This is independent of the step-mode. In order to step into the thunk,
you would need to use stepi.
When stepping over an indirect call thunk, GDB would first step through
the thunk, then recognize that it stepped into a sub-routine and resume to
the caller (of the thunk). Not sure whether this is worth optimizing.
Thunk detection is implemented via gdbarch. I implemented the methods for
IA. Other architectures may run into unexpected fails.
The tests assume a fixed number of instruction steps to reach a thunk.
This depends on the compiler as well as the architecture. They may need
adjustments when we add support for more architectures. Or we can simply
drop those tests that cover being able to step into thunks using
instruction stepping.
When using an older GCC, the tests will fail to build and will be reported
as untested:
Running .../gdb.base/step-indirect-call-thunk.exp ...
gdb compile failed, \
gcc: error: unrecognized command line option '-mindirect-branch=thunk'
gcc: error: unrecognized command line option '-mfunction-return=thunk'
=== gdb Summary ===
# of untested testcases 1
gdb/
* infrun.c (process_event_stop_test): Call
gdbarch_in_indirect_branch_thunk.
* gdbarch.sh (in_indirect_branch_thunk): New.
* gdbarch.c: Regenerated.
* gdbarch.h: Regenerated.
* x86-tdep.h: New.
* x86-tdep.c: New.
* Makefile.in (ALL_TARGET_OBS): Add x86-tdep.o.
(HFILES_NO_SRCDIR): Add x86-tdep.h.
(ALLDEPFILES): Add x86-tdep.c.
* arch-utils.h (default_in_indirect_branch_thunk): New.
* arch-utils.c (default_in_indirect_branch_thunk): New.
* i386-tdep: Include x86-tdep.h.
(i386_in_indirect_branch_thunk): New.
(i386_elf_init_abi): Set in_indirect_branch_thunk gdbarch
function.
* amd64-tdep: Include x86-tdep.h.
(amd64_in_indirect_branch_thunk): New.
(amd64_init_abi): Set in_indirect_branch_thunk gdbarch function.
testsuite/
* gdb.base/step-indirect-call-thunk.exp: New.
* gdb.base/step-indirect-call-thunk.c: New.
* gdb.reverse/step-indirect-call-thunk.exp: New.
* gdb.reverse/step-indirect-call-thunk.c: New.
This changes the gdbarch fast_tracepoint_valid_at method to use a
std::string as its out parameter, and then updates all the uses. This
allows removing a cleanup from breakpoint.c.
Regression tested by the buildbot.
ChangeLog
2018-02-24 Tom Tromey <tom@tromey.com>
* i386-tdep.c (i386_fast_tracepoint_valid_at): "msg" now a
std::string.
* gdbarch.sh (fast_tracepoint_valid_at): Change "msg" to a
std::string*.
* gdbarch.c: Rebuild.
* gdbarch.h: Rebuild.
* breakpoint.c (check_fast_tracepoint_sals): Use std::string.
* arch-utils.h (default_fast_tracepoint_valid_at): Update.
* arch-utils.c (default_fast_tracepoint_valid_at): "msg" now a
std::string*.
pseudo registers are either from raw registers or memory, so
gdbarch methods pseudo_register_read and pseudo_register_read_value
should have regcache object which only have read methods. In other
words, we should disallow writing to regcache in these two gdbarch
methods. In order to apply this restriction, this patch adds a new
class readable_regcache, derived from reg_buffer, and it only has
raw_read and cooked_read methods. regcache is derived from
readable_regcache. This patch also passes readable_regcache instead of
regcache to gdbarch methods pseudo_register_read and
pseudo_register_read_value.
This patch moves raw_read* and cooked_read* methods to readable_regcache,
which is straightforward. One thing not straightforward is that I split
regcache::xfer_part to readable_regcache::read_part and regcache::write_part,
because readable_regcache can only have methods to read.
readable_regcache is an abstract base class, and it has a pure virtual
function raw_update, because I don't want readable_regcache know where
these raw registers are from. They can be from either the target
(readwrite regcache) or the regcache itself (readonly regcache).
gdb:
2018-02-21 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_pseudo_register_read_value): Change
parameter type to 'readable_regcache *'.
* amd64-tdep.c (amd64_pseudo_register_read_value): Likewise.
* arm-tdep.c (arm_neon_quad_read): Likewise.
(arm_pseudo_read): Likewise.
* avr-tdep.c (avr_pseudo_register_read): Likewise.
* bfin-tdep.c (bfin_pseudo_register_read): Likewise.
* frv-tdep.c (frv_pseudo_register_read): Likewise.
* gdbarch.c: Re-generated.
* gdbarch.h: Re-generated.
* gdbarch.sh (pseudo_register_read): Change parameter type to
'readable_regcache *'.
(pseudo_register_read_value): Likewise.
* h8300-tdep.c (pseudo_from_raw_register): Likewise.
(h8300_pseudo_register_read): Likewise.
* hppa-tdep.c (hppa_pseudo_register_read): Likewise.
* i386-tdep.c (i386_mmx_regnum_to_fp_regnum): Likewise.
(i386_pseudo_register_read_into_value): Likewise.
(i386_pseudo_register_read_value): Likewise.
* i386-tdep.h (i386_pseudo_register_read_into_value): Update
declaration.
* ia64-tdep.c (ia64_pseudo_register_read): Likewise.
* m32c-tdep.c (m32c_raw_read): Likewise.
(m32c_read_flg): Likewise.
(m32c_banked_register): Likewise.
(m32c_banked_read): Likewise.
(m32c_sb_read): Likewise.
(m32c_part_read): Likewise.
(m32c_cat_read): Likewise.
(m32c_r3r2r1r0_read): Likewise.
(m32c_pseudo_register_read): Likewise.
* m68hc11-tdep.c (m68hc11_pseudo_register_read): Likewise.
* mep-tdep.c (mep_pseudo_cr32_read): Likewise.
(mep_pseudo_cr64_read): Likewise.
(mep_pseudo_register_read): Likewise.
* mips-tdep.c (mips_pseudo_register_read): Likewise.
* msp430-tdep.c (msp430_pseudo_register_read): Likewise.
* nds32-tdep.c (nds32_pseudo_register_read): Likewise.
* regcache.c (regcache::raw_read): Move it to readable_regcache.
(regcache::cooked_read): Likewise.
(regcache::cooked_read_value): Likewise.
(regcache_cooked_read_signed):
(regcache::cooked_read): Likewise.
* regcache.h (readable_regcache): New class.
(regcache): Inherit readable_regcache. Move some methods to
readable_regcache.
* rl78-tdep.c (rl78_pseudo_register_read): Change
parameter type to 'readable_regcache *'.
* rs6000-tdep.c (do_regcache_raw_read): Remove.
(e500_pseudo_register_read): Change parameter type to
'readable_regcache *'.
(dfp_pseudo_register_read): Likewise.
(vsx_pseudo_register_read): Likewise.
(efpr_pseudo_register_read): Likewise.
* s390-tdep.c (s390_pseudo_register_read): Likewise.
* sh-tdep.c (sh_pseudo_register_read): Likewise.
* sh64-tdep.c (pseudo_register_read_portions): Likewise.
(sh64_pseudo_register_read): Likewise.
* sparc-tdep.c (sparc32_pseudo_register_read): Likewise.
* sparc64-tdep.c (sparc64_pseudo_register_read): Likewise.
* spu-tdep.c (spu_pseudo_register_read_spu): Likewise.
(spu_pseudo_register_read): Likewise.
* xtensa-tdep.c (xtensa_register_read_masked): Likewise.
(xtensa_pseudo_register_read): Likewise.
The patch later in this series will move regcache's raw_read and
cooked_read methods to a new class regcache_read, and regcache is
dervied from it. Also pass regcache_read instead of regcache to gdbarch
methods pseudo_register_read and pseudo_register_read_value. In order
to prepare for this change, this patch changes regcache_raw_read to
regcache->raw_read. On the other hand, since we are in C++, I prefer
using class method (regcache->raw_read).
gdb:
2018-01-22 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_pseudo_read_value): Call regcache
method raw_read instead of regcache_raw_read.
* amd64-tdep.c (amd64_pseudo_register_read_value): Likewise.
* arm-tdep.c (arm_neon_quad_read): Likewise.
* avr-tdep.c (avr_pseudo_register_read): Likewise.
* bfin-tdep.c (bfin_pseudo_register_read): Likewise.
* frv-tdep.c (frv_pseudo_register_read): Likewise.
* h8300-tdep.c (h8300_pseudo_register_read): Likewise.
* i386-tdep.c (i386_mmx_regnum_to_fp_regnum): Likewise.
(i386_pseudo_register_read_into_value): Likewise.
* mep-tdep.c (mep_pseudo_cr32_read): Likewise.
* msp430-tdep.c (msp430_pseudo_register_read): Likewise.
* nds32-tdep.c (nds32_pseudo_register_read): Likewise.
* rl78-tdep.c (rl78_pseudo_register_read): Likewise.
* s390-linux-tdep.c (s390_pseudo_register_read): Likewise.
* sparc-tdep.c (sparc32_pseudo_register_read): Likewise.
* sparc64-tdep.c (sparc64_pseudo_register_read): Likewise.
* spu-tdep.c (spu_pseudo_register_read_spu): Likewise.
* xtensa-tdep.c (xtensa_pseudo_register_read): Likewise.
This patch mechanically replaces convert_typed_floating with the
equivalent target_float_convert throughout tdep files, to prepare
for the removal of doublest.{c,h}.
No functional change intended.
gdb/ChangeLog:
2017-11-06 Ulrich Weigand <uweigand@de.ibm.com>
* i386-tdep.c: Include "target-float.h". Do not include "doublest.h".
(i386_extract_return_value): Use target_float_convert.
(i386_store_return_value): Likewise.
* i387-tdep.c (i387_register_to_value): Use target_float_convert.
(i387_value_to_register): Likewise.
* ia64-tdep.c: Include "target-float.h". Do not include "doublest.h".
(ia64_register_to_value): Use target_float_convert.
(ia64_value_to_register): Likewise.
(ia64_extract_return_value): Likewise.
(ia64_store_return_value): Likewise.
(ia64_push_dummy_call): Likewise.
* m68k-tdep.c: Include "target-float.h".
(m68k_register_to_value): Use target_float_convert.
(m68k_value_to_register): Likewise.
(m68k_svr4_extract_return_value): Likewise.
(m68k_svr4_store_return_value): Likewise.
* ppc-sysv-tdep.c: Include "target-float.h".
(ppc_sysv_abi_push_dummy_call): Use target_float_convert.
(do_ppc_sysv_return_value): Likewise.
(ppc64_sysv_abi_push_freg): Likewise.
(ppc64_sysv_abi_return_value_base): Likewise.
* rs6000-aix-tdep.c: Include "target-float.h".
(rs6000_push_dummy_call): Use target_float_convert.
(rs6000_return_value): Likewise.
* rs6000-lynx178-tdep.c: Include "target-float.h".
(rs6000_lynx178_push_dummy_call): Use target_float_convert.
(rs6000_lynx178_return_value): Likewise.
* rs6000-tdep.c: Include "target-float.h". Do not include "doublest.h".
(rs6000_register_to_value): Use target_float_convert.
(rs6000_value_to_register): Likewise.
* arm-tdep.c: Include "target-float.h". Do not include "doublest.h".
(arm_extract_return_value): Use target_float_convert.
(arm_store_return_value): Likewise.
* sh-tdep.c: Include "target-float.h". Do not include "doublest.h".
(sh_register_convert_to_virtual): Use target_float_convert.
(sh_register_convert_to_raw): Likewise.
* sh64-tdep.c: Include "target-float.h".
(sh64_extract_return_value): Use target_float_convert.
(sh64_register_convert_to_virtual): Likewise.
(sh64_register_convert_to_raw): Likewise. Fix argument types.
displaced_step_closure is a type defined in multiple -tdep.c files.
Trying to xfree it from the common code (infrun.c) is a problem when we
try to poison xfree for non-POD types. Because there can be multiple of
these types in the same build, this patch makes a hierarchy of classes
with a virtual destructor. When the common code deletes the object
through a displaced_step_closure pointer, it will invoke the right
destructor.
The amd64 used a last-member array with a variable size. That doesn't
work with new, so I changed it for an std::vector. Other architectures
which used a simple byte buffer as a closure now use a shared
buf_displaced_step_closure, a closure type that only contains a
gdb::byte_vector.
Reg-tested on the buildbot.
gdb/ChangeLog:
* infrun.h: Include common/byte-vector.h.
(struct displaced_step_closure): New struct.
(struct buf_displaced_step_closure): New struct.
* infrun.c (displaced_step_closure::~displaced_step_closure):
Provide default implementation.
(displaced_step_clear): Deallocate step closure with delete.
* aarch64-tdep.c (displaced_step_closure): Rename to ...
(aarch64_displaced_step_closure): ... this, extend
displaced_step_closure.
(aarch64_displaced_step_data) <dsc>: Change type to
aarch64_displaced_step_closure.
(aarch64_displaced_step_copy_insn): Adjust to type change, use
unique_ptr.
(aarch64_displaced_step_fixup): Add cast for displaced step
closure.
* amd64-tdep.c (displaced_step_closure): Rename to ...
(amd64_displaced_step_closure): ... this, extend
displaced_step_closure.
<insn_buf>: Change type to std::vector<gdb_byte>.
<max_len>: Remove.
(fixup_riprel): Change type of DSC parameter, adjust to type
change of insn_buf.
(fixup_displaced_copy): Change type of DSC parameter.
(amd64_displaced_step_copy_insn): Instantiate
amd64_displaced_step_closure.
(amd64_displaced_step_fixup): Add cast for closure type, adjust
to type change of insn_buf.
* arm-linux-tdep.c (arm_linux_cleanup_svc): Change type of
parameter DSC.
(arm_linux_copy_svc): Likewise.
(cleanup_kernel_helper_return): Likewise.
(arm_catch_kernel_helper_return): Likewise.
(arm_linux_displaced_step_copy_insn): Instantiate
arm_displaced_step_closure.
* arm-tdep.c (arm_pc_is_thumb): Add cast for closure.
(displaced_read_reg): Change type of parameter DSC.
(branch_write_pc): Likewise.
(load_write_pc): Likewise.
(alu_write_pc): Likewise.
(displaced_write_reg): Likewise.
(arm_copy_unmodified): Likewise.
(thumb_copy_unmodified_32bit): Likewise.
(thumb_copy_unmodified_16bit): Likewise.
(cleanup_preload): Likewise.
(install_preload): Likewise.
(arm_copy_preload): Likewise.
(thumb2_copy_preload): Likewise.
(install_preload_reg): Likewise.
(arm_copy_preload_reg): Likewise.
(cleanup_copro_load_store): Likewise.
(install_copro_load_store): Likewise.
(arm_copy_copro_load_store) Likewise.
(thumb2_copy_copro_load_store): Likewise.
(cleanup_branch): Likewise.
(install_b_bl_blx): Likewise.
(arm_copy_b_bl_blx): Likewise.
(thumb2_copy_b_bl_blx): Likewise.
(thumb_copy_b): Likewise.
(install_bx_blx_reg): Likewise.
(arm_copy_bx_blx_reg): Likewise.
(thumb_copy_bx_blx_reg): Likewise.
(cleanup_alu_imm): Likewise.
(arm_copy_alu_imm): Likewise.
(thumb2_copy_alu_imm): Likewise.
(cleanup_alu_reg): Likewise.
(install_alu_reg): Likewise.
(arm_copy_alu_reg): Likewise.
(thumb_copy_alu_reg): Likewise.
(cleanup_alu_shifted_reg): Likewise.
(install_alu_shifted_reg): Likewise.
(arm_copy_alu_shifted_reg): Likewise.
(cleanup_load): Likewise.
(cleanup_store): Likewise.
(arm_copy_extra_ld_st): Likewise.
(install_load_store): Likewise.
(thumb2_copy_load_literal): Likewise.
(thumb2_copy_load_reg_imm): Likewise.
(arm_copy_ldr_str_ldrb_strb): Likewise.
(cleanup_block_load_all): Likewise.
(cleanup_block_store_pc): Likewise.
(cleanup_block_load_pc): Likewise.
(arm_copy_block_xfer): Likewise.
(thumb2_copy_block_xfer): Likewise.
(cleanup_svc): Likewise.
(install_svc): Likewise.
(arm_copy_svc): Likewise.
(thumb_copy_svc): Likewise.
(arm_copy_undef): Likewise.
(thumb_32bit_copy_undef): Likewise.
(arm_copy_unpred): Likewise.
(arm_decode_misc_memhint_neon): Likewise.
(arm_decode_unconditional): Likewise.
(arm_decode_miscellaneous): Likewise.
(arm_decode_dp_misc): Likewise.
(arm_decode_ld_st_word_ubyte): Likewise.
(arm_decode_media): Likewise.
(arm_decode_b_bl_ldmstm): Likewise.
(arm_decode_ext_reg_ld_st): Likewise.
(thumb2_decode_dp_shift_reg): Likewise.
(thumb2_decode_ext_reg_ld_st): Likewise.
(arm_decode_svc_copro): Likewise.
(thumb2_decode_svc_copro): Likewise.
(install_pc_relative): Likewise.
(thumb_copy_pc_relative_16bit): Likewise.
(thumb_decode_pc_relative_16bit): Likewise.
(thumb_copy_pc_relative_32bit): Likewise.
(thumb_copy_16bit_ldr_literal): Likewise.
(thumb_copy_cbnz_cbz): Likewise.
(thumb2_copy_table_branch): Likewise.
(cleanup_pop_pc_16bit_all): Likewise.
(thumb_copy_pop_pc_16bit): Likewise.
(thumb_process_displaced_16bit_insn): Likewise.
(decode_thumb_32bit_ld_mem_hints): Likewise.
(thumb_process_displaced_32bit_insn): Likewise.
(thumb_process_displaced_insn): Likewise.
(arm_process_displaced_insn): Likewise.
(arm_displaced_init_closure): Likewise.
(arm_displaced_step_fixup): Add cast for closure.
* arm-tdep.h: Include infrun.h.
(displaced_step_closure): Rename to ...
(arm_displaced_step_closure): ... this, extend
displaced_step_closure.
<u::svc::copy_svc_os>: Change type of parameter DSC.
<cleanup>: Likewise.
(arm_process_displaced_insn): Likewise.
(arm_displaced_init_closure): Likewise.
(displaced_read_reg): Likewise.
(displaced_write_reg): Likewise.
* i386-linux-tdep.c (i386_linux_displaced_step_copy_insn):
Adjust.
* i386-tdep.h: Include infrun.h.
(i386_displaced_step_closure): New typedef.
* i386-tdep.c (i386_displaced_step_copy_insn): Use
i386_displaced_step_closure.
(i386_displaced_step_fixup): Adjust.
* rs6000-tdep.c (ppc_displaced_step_closure): New typedef.
(ppc_displaced_step_copy_insn): Use ppc_displaced_step_closure
and unique_ptr.
(ppc_displaced_step_fixup): Adjust.
* s390-linux-tdep.c (s390_displaced_step_closure): New typedef.
(s390_displaced_step_copy_insn): Use s390_displaced_step_closure
and unique_ptr.
(s390_displaced_step_fixup): Adjust.
This patch remove the usage of tdesc_i386_mmx in i386-go32-tdep.c, and use
i386_target_description to get it instead.
gdb:
2017-09-04 Yao Qi <yao.qi@linaro.org>
* i386-go32-tdep.c: Include x86-xstate.h.
(i386_go32_init_abi): Call i386_target_description.
* i386-tdep.c (i386_target_description): Return tdesc_i386_mmx
if xcr0 is X86_XSTATE_X87_MASK.
* i386-tdep.h (tdesc_i386): Remove the declaration.
(tdesc_i386_mmx): Likewise.
GDB can call function i386_target_description to get the right target
description rather than tdesc_i386
gdb:
2017-09-04 Yao Qi <yao.qi@linaro.org>
* amd64-fbsd-nat.c (amd64fbsd_read_description): Call
i386_target_description.
* i386-fbsd-nat.c (i386fbsd_read_description): Call
i386_target_description.
* i386-tdep.c (i386_gdbarch_init): Likewise.
As an update to commit ede5f15146 ("gdbarch.h: Change
gdbarch_info::tdep_info's type to void *") replace the definition of the
`tdep_info' member in `struct gdbarch_info' with an anonymous union,
comprising the original member, with its type reverted to `struct
gdbarch_tdep_info *', a `tdesc_data' member of a `struct tdesc_arch_data
*' type and an `id' member of an `int *' type. Remove now unnecessary
casts throughout use places then, making code easier to read an less
prone to errors, which may happen with casting.
gdb/
* gdbarch.sh (gdbarch_info): Replace the `tdep_info' member with
a union of `tdep_info', `tdesc_data' and `id'.
* aarch64-tdep.c (aarch64_gdbarch_init): Use `info.tdesc_data'
rather than `info.tdep_info'.
* amd64-linux-tdep.c (amd64_linux_init_abi): Likewise.
* i386-linux-tdep.c (i386_linux_init_abi): Likewise.
* i386-tdep.c (i386_gdbarch_init): Likewise.
* mips-linux-tdep.c (mips_linux_init_abi): Likewise.
* mips-tdep.c (mips_gdbarch_init): Likewise.
* nds32-tdep.c (nds32_gdbarch_init): Likewise.
* rs6000-tdep.c (rs6000_gdbarch_init): Likewise.
* ppc-linux-tdep.c (ppu2spu_sniffer): Use `info.id' rather than
`info.tdep_info'.
(ppc_linux_init_abi): Use `info.tdesc_data' rather than
`info.tdep_info'.
* sparc-tdep.c (sparc32_gdbarch_init): Likewise.
* spu-multiarch.c (spu_gdbarch): Use `info.id' rather than
`info.tdep_info'.
* spu-tdep.c (spu_gdbarch_init): Likewise.
* gdbarch.h: Regenerate.
This is a follow-up to
[PATCH 0/6] Unify the disassembler selection in gdb and objdump
https://sourceware.org/ml/binutils/2017-05/msg00192.html
that is, opcodes is able to select the right disassembler, so gdb
doesn't have to select them. Instead, gdb can just use
default_print_insn. As a result, these print_insn_XXX are not used
out of opcodes, so this patch also moves their declarations from
include/dis-asm.h to opcodes/disassemble.h. With this change,
GDB doesn't use any print_insn_XXX directly any more.
gdb:
2017-06-14 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_gdb_print_insn): Call
default_print_insn instead of print_insn_aarch64.
* arm-tdep.c (gdb_print_insn_arm): Call
default_print_insn instead of print_insn_big_arm
and print_insn_little_arm.
* i386-tdep.c (i386_print_insn): Call default_print_insn
instead of print_insn_i386.
* ia64-tdep.c (ia64_print_insn): Call
default_print_insn instead of print_insn_ia64.
* mips-tdep.c (gdb_print_insn_mips): Call
default_print_insn instead of print_insn_big_mips
and print_insn_little_mips.
* spu-tdep.c (gdb_print_insn_spu): Call default_print_insn
instead of print_insn_spu.
include:
2017-06-14 Yao Qi <yao.qi@linaro.org>
* dis-asm.h (print_insn_aarch64): Move it to opcodes/disassemble.h.
(print_insn_big_arm, print_insn_big_mips): Likewise.
(print_insn_i386, print_insn_ia64): Likewise.
(print_insn_little_arm, print_insn_little_mips): Likewise.
(print_insn_spu): Likewise.
opcodes:
2017-06-14 Yao Qi <yao.qi@linaro.org>
* aarch64-dis.c: Include disassemble.h instead of dis-asm.h.
* arm-dis.c: Likewise.
* ia64-dis.c: Likewise.
* mips-dis.c: Likewise.
* spu-dis.c: Likewise.
* disassemble.h (print_insn_aarch64): New declaration, moved from
include/dis-asm.h.
(print_insn_big_arm, print_insn_big_mips): Likewise.
(print_insn_i386, print_insn_ia64): Likewise.
(print_insn_little_arm, print_insn_little_mips): Likewise.
I posit that this makes them easier to find.
The other day while working on the wchar_t patch, I had a bit of
trouble finding the DJGPP/go32 tdep bits. My initial reaction was
looking for a go32-specific tdep file, but there's none.
Confirmed that a --host=i586-pc-msdosdjgpp GDB still builds
successfully and includes the i386-go32-tdep.o object.
Confirmed that an --enable-targets=all build of GDB on x86-64
GNU/Linux includes the DJGPP/go32 bits too.
gdb/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
* Makefile.in (ALL_TARGET_OBS): Add i386-go32-tdep.o.
* configure.tgt: Handle i[34567]86-*-go32* and
i[34567]86-*-msdosdjgpp*.
* i386-tdep.c (i386_svr4_reg_to_regnum):
Make extern.
(i386_go32_init_abi, i386_coff_osabi_sniffer): Moved to
i386-go32-tdep.c.
(_initialize_i386_tdep): DJGPP bits moved to i386-go32-tdep.c.
* i386-go32-tdep.c: New file.
* i386-tdep.h (tdesc_i386_mmx, i386_svr4_reg_to_regnum): New
declarations.
i386_gdbarch_init already does this unconditionally for all x86 ports.
Tested on x86-64 Fedora 23.
gdb/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
* i386-tdep.c (i386_elf_init_abi, i386_go32_init_abi): Remove
calls to set_gdbarch_gnu_triplet_regexp.
GDB is currently not aware that wchar_t is a built-in type in C++
mode. This is usually not a problem because the debug info describes
the type, so when you have a program loaded, you don't notice this.
However, if you try expressions involving wchar_t before a program is
loaded, gdb errors out:
(gdb) p (wchar_t)-1
No symbol table is loaded. Use the "file" command.
(gdb) p L"hello"
No type named wchar_t.
(gdb) ptype L"hello"
No type named wchar_t.
This commit teaches gdb about the type. After:
(gdb) p (wchar_t)-1
$1 = -1 L'\xffffffff'
(gdb) p L"hello"
$2 = L"hello"
(gdb) ptype L"hello"
type = wchar_t [6]
Unlike char16_t/char32_t, unfortunately, the underlying type of
wchar_t is implementation dependent, both size and signness. So this
requires adding a couple new gdbarch hooks.
I grepped the GCC code base for WCHAR_TYPE and WCHAR_TYPE_SIZE, and it
seems to me that the majority of the ABIs have a 4-byte signed
wchar_t, so that's what I made the default for GDB too. And then I
looked for which ports have a 16-bit and/or unsigned wchar_t, and made
GDB follow suit.
gdb/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR gdb/21323
* c-lang.c (cplus_primitive_types) <cplus_primitive_type_wchar_t>:
New enum value.
(cplus_language_arch_info): Register cplus_primitive_type_wchar_t.
* gdbtypes.h (struct builtin_type) <builtin_wchar>: New field.
* gdbtypes.c (gdbtypes_post_init): Create the "wchar_t" type.
* gdbarch.sh (wchar_bit, wchar_signed): New per-arch values.
* gdbarch.h, gdbarch.c: Regenerate.
* aarch64-tdep.c (aarch64_gdbarch_init): Override
gdbarch_wchar_bit and gdbarch_wchar_signed.
* alpha-tdep.c (alpha_gdbarch_init): Likewise.
* arm-tdep.c (arm_gdbarch_init): Likewise.
* avr-tdep.c (avr_gdbarch_init): Likewise.
* h8300-tdep.c (h8300_gdbarch_init): Likewise.
* i386-nto-tdep.c (i386nto_init_abi): Likewise.
* i386-tdep.c (i386_go32_init_abi): Likewise.
* m32r-tdep.c (m32r_gdbarch_init): Likewise.
* moxie-tdep.c (moxie_gdbarch_init): Likewise.
* nds32-tdep.c (nds32_gdbarch_init): Likewise.
* rs6000-aix-tdep.c (rs6000_aix_init_osabi): Likewise.
* sh-tdep.c (sh_gdbarch_init): Likewise.
* sparc-tdep.c (sparc32_gdbarch_init): Likewise.
* sparc64-tdep.c (sparc64_init_abi): Likewise.
* windows-tdep.c (windows_init_abi): Likewise.
* xstormy16-tdep.c (xstormy16_gdbarch_init): Likewise.
gdb/testsuite/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR gdb/21323
* gdb.cp/wide_char_types.c: Include <wchar.h>.
(wchar): New global.
* gdb.cp/wide_char_types.exp (wide_char_types_program)
(do_test_wide_char, wide_char_types_no_program, top level): Add
wchar_t testing.
The memory disassemble_info::disassembler_options points to is always
owned by the client. I.e., that field is an non-owning, observing
pointer. Thus const makes sense.
Are the include/ and opcodes/ bits OK?
Tested on x86_64 Fedora 23, built with --enable-targets=all.
include/ChangeLog:
2017-04-05 Pedro Alves <palves@redhat.com>
* dis-asm.h (disassemble_info) <disassembler_options>: Now a
"const char *".
(next_disassembler_option): Constify.
opcodes/ChangeLog:
2017-04-05 Pedro Alves <palves@redhat.com>
* arc-dis.c (parse_option, parse_disassembler_options): Constify.
* arm-dis.c (parse_arm_disassembler_options): Constify.
* ppc-dis.c (powerpc_init_dialect): Constify local.
* vax-dis.c (parse_disassembler_options): Constify.
gdb/ChangeLog:
2017-04-05 Pedro Alves <palves@redhat.com>
* arm-tdep.c (show_disassembly_style_sfunc): Constify local.
* disasm.c (set_disassembler_options): Constify local.
* i386-tdep.c (i386_print_insn): Remove cast and FIXME comment.
This patch initializes the BND registers before executing the inferior
call. BND registers can be in arbitrary values at the moment of the
inferior call. In case the function being called uses as part of the
parameters BND register, e.g. when passing a pointer as parameter, the
current value of the register will be used. This can cause boundary
violations that are not due to a real bug or even desired by the user.
In this sense the best to be done is set the BND registers to allow
access to the whole memory, i.e. initialized state, before pushing the
inferior call.
2017-03-07 Walfred Tedeschi <walfred.tedeschi@intel.com>
gdb/ChangeLog:
* i387-tdep.h (i387_reset_bnd_regs): Add function definition.
* i387-tdep.c (i387_reset_bnd_regs): Add function implementation.
* i386-tdep.c (i386_push_dummy_call): Call i387_reset_bnd_regs.
* amd64-tdep (amd64_push_dummy_call): Call i387_reset_bnd_regs.
gdb/testsuite/ChangeLog:
* i386-mpx-call.c: New file.
* i386-mpx-call.exp: New file.
gdb/doc/ChangeLog:
* Memory Protection Extensions: Add information about inferior
calls.
This patch addresses BZ 21005, which is gdb failing to recognize an rdrand
instruction.
It enables support for both rdrand and rdseed and handles extended register
addressing (R8~R15) for 16-bit, 32-bit and 64-bit.
gdb/ChangeLog
2017-02-06 Luis Machado <lgustavo@codesourcery.com>
* NEWS: Mention support for record/replay of Intel 64 rdrand and
rdseed instructions.
i386-tdep.c (i386_process_record): Handle Intel 64 rdrand and rseed.
gdb/testsuite/ChangeLog:
2017-02-06 Luis Machado <lgustavo@codesourcery.com>
* gdb.reverse/insn-reverse.c: Include insn-reverse-x86.c.
* gdb.reverse/insn-reverse-x86.c: New file.
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
Both of them are used in conversion. We can remove them since the
conversion is done.
There are many architectures only have one breakpoint instruction,
so their gdbarch methods breakpoint_kind_from_pc and
sw_breakpoint_from_kind look very similar. Instead of macro, we
use template "template <size_t, const gdb_byte *> struct bp_manipulation"
for these architectures. In order to use template, I also change
breakpoint instruction of type "static const gdb_byte[]" to
"constexpr gdb_byte[]", and rename them to ARCH_break_insn.
gdb:
2016-11-03 Yao Qi <yao.qi@linaro.org>
Pedro Alves <palves@redhat.com>
* aarch64-tdep.c (aarch64_default_breakpoint): Change it to
constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(aarch64_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* alpha-tdep.c (break_insn): Rename to alpha_break_insn.
Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(alpha_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* arc-tdep.c (arc_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* arch-utils.h (GDBARCH_BREAKPOINT_MANIPULATION): Remove.
(struct bp_manipulation): New.
(SET_GDBARCH_BREAKPOINT_MANIPULATION): Remove.
(struct bp_manipulation_endian): New.
(BP_MANIPULATION): New.
(BP_MANIPULATION_ENDIAN): New.
* arm-tdep.c (arm_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* avr-tdep.c (avr_break_insn): Change it constexpr.
(avr_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* bfin-tdep.c (bfin_gdbarch_init): Likewise.
* cris-tdep.c (cris_gdbarch_init): Likewise.
* frv-tdep.c (breakpoint): Rename it to frv_break_insn, and
change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(frv_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* ft32-tdep.c (breakpoint): Rename it to ft32_break_insn and
change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(ft32_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* h8300-tdep.c (breakpoint): Rename it to h8300_break_insn.
Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(h8300_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* hppa-tdep.c (breakpoint): Rename it to h8300_break_insn.
Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(hppa_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* i386-tdep.c (break_insn): Rename it to i386_break_insn.
Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(i386_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* iq2000-tdep.c (iq2000_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* lm32-tdep.c (breakpoint): Rename it to lm32_break_insn and
change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(lm32_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* m32c-tdep.c (break_insn): Rename it to m32c_break_insn and change
its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(m32c_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* m32r-tdep.c (m32r_gdbarch_init): Likewise.
* m68hc11-tdep.c (breakpoint): Rename it to m68hc11_break_insn and
change its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(m68hc11_gdbarch_init): Don't use SET_GDBARCH_BREAKPOINT_MANIPULATION.
* m68k-tdep.c (break_insn): Rename it to m68k_break_insn and change
its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(m68k_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* m88k-tdep.c (break_insn): Rename it to m88k_break_insn and change
its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(m88k_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* mep-tdep.c (breakpoint): Rename it to mep_break_insn and change
its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(mep_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* microblaze-tdep.c (break_insn): Rename it to
microblaze_break_insn and change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(microblaze_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* mips-tdep.c (mips_gdbarch_init): Likewise.
* mn10300-tdep.c (breakpoint): Rename it to mn10300_break_insn and
change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(mn10300_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* moxie-tdep.c (breakpoint): Rename it to moxie_break_insn and
change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(moxie_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* msp430-tdep.c (breakpoint): Rename it to msp430_break_insn
and change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(msp430_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* mt-tdep.c (mt_gdbarch_init): Likewise.
* nds32-tdep.c (break_insn): Rename it to nds32_break_insn
and change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(nds32_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* nios2-tdep.c (nios2_gdbarch_init): Likewise.
* rl78-tdep.c (breakpoint): Rename it to rl78_break_ins
and change its type to rl78_break_insn. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(rl78_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* rs6000-tdep.c (big_breakpoint): Change its type to
constexpr.
(little_breakpoint): Likewise.
Don't use GDBARCH_BREAKPOINT_MANIPULATION_ENDIAN.
(rs6000_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* rx-tdep.c (breakpoint): Rename it to rx_break_insn and
change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(rx_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* s390-linux-tdep.c (breakpoint): Rename it to s390_break_insn
and change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION
(s390_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* score-tdep.c (score_gdbarch_init): Likewise.
* sh-tdep.c (sh_gdbarch_init): Likewise.
* sh64-tdep.c (sh64_gdbarch_init): Likewise.
* sparc-tdep.c (break_insn): Rename it to sparc_break_insn
and change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(sparc32_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* spu-tdep.c (breakpoint): Rename it to spu_break_insn and change
its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(spu_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* tic6x-tdep.c (tic6x_gdbarch_init): Likewise.
* tilegx-tdep.c (breakpoint): Rename it to tilegx_break_insn
and change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(tilegx_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* v850-tdep.c (v850_gdbarch_init): Likewise.
* vax-tdep.c (break_insn): Rename it to vax_break_insn and
change its type to constexpr.
Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(vax_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* xstormy16-tdep.c (breakpoint): Rename it to
xstormy16_break_insn and change its type to constexpr.
Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(xstormy16_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* xtensa-tdep.c (xtensa_gdbarch_init): Likewise.
Make sure the architecture is `bfd_arch_i386' before handling the `set
mpx' and `show mpx' commands, avoiding the issue with `i386_mpx_enabled'
interpreting `gdbarch->tdep' according to the `struct gdbarch_tdep'
definition in i386-tdep.h while indeed in a multi-target configuration
it may have a different layout and cause GDB to crash or at least
misbehave.
gdb/
* i386-tdep.c (i386_mpx_info_bounds): Make sure the architecture
is `bfd_arch_i386' before proceeding.
(i386_mpx_set_bounds): Likewise.
Now that all the prerequisites are in place, this commit finally adds support
for handling the __float128 type on Intel and Power, by providing appropriate
platform-specific versions of the floatformat_for_type callback.
Since at this point we do not yet have any indication in the debug info to
distinguish different floating-point formats of the same length, we simply
use the type name as hint. Types named "__float128" get the IEEE format.
In addition to handling "__float128" itself, we also recognize "_Float128"
and (on Power) "_Float64x", as well as the complex versions of those.
(As pointed out by Joseph Myers, starting with GCC 7, __float128 is just
a typedef for _Float128 -- but it's good to handle this anyway.)
A new test case does some simple verification that the format is decoded
correctly, using both __float128 and "long double" to make sure using both
in the same file still works. Another new test verifies handling of the
_FloatN and _FloatNx types supported by GCC 7, as well as the complex
versions of those types.
Note that this still only supports basic format decoding and encoding.
We do not yet support the GNU extension 'g' suffix for __float128 constants.
In addition, since all *arithmetic* on floating-point values is still
performed in native host "long double" arithmetic, if that format is not
able to encode all target __float128 values, we may get incorrect results.
(To fix this would require implementing fully synthetic target floating-
point arithmetic along the lines of GCC's real.c, presumably using MPFR.)
gdb/ChangeLog:
* i386-tdep.c (i386_floatformat_for_type): New function.
(i386_gdbarch_init): Install it.
* ppc-linux-tdep.c (ppc_floatformat_for_type): New function.
(ppc_linux_init_abi): Install it.
gdb/testsuite/ChangeLog:
* gdb.base/float128.c: New file.
* gdb.base/float128.exp: Likewise.
* gdb.base/floatn.c: Likewise.
* gdb.base/floatn.exp: Likewise.
Signed-off-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
The current MPX target descriptions assume that MPX is always combined
with AVX, however that's not correct. We can have machines with MPX
and without AVX; or machines with AVX and without MPX.
This patch adds new target descriptions for machines that support
both MPX and AVX, as duplicates of the existing MPX descriptions.
The following commit will remove AVX from the MPX-only descriptions.
2016-04-16 Walfred Tedeschi <walfred.tedeschi@intel.com>
gdb/ChangeLog:
* amd64-linux-tdep.c (features/i386/amd64-avx-mpx-linux.c):
New include.
(amd64_linux_core_read_description): Add case for
X86_XSTATE_AVX_MPX_MASK.
(_initialize_amd64_linux_tdep): Call initialize_tdesc_amd64_avx_mpx_linux.
* amd64-linux-tdep.h (tdesc_amd64_avx_mpx_linux): New definition.
* amd64-tdep.c (features/i386/amd64-avx-mpx.c): New include.
(amd64_target_description): Add case for X86_XSTATE_AVX_MPX_MASK.
(_initialize_amd64_tdep): Call initialize_tdesc_amd64_avx_mpx.
* common/x86-xstate.h (X86_XSTATE_MPX_MASK): Remove AVX bits.
(X86_XSTATE_AVX_MPX_MASK): New case.
* features/Makefile (i386/i386-avx-mpx, i386/i386-avx-mpx-linux)
(i386/amd64-avx-mpx, i386/amd64-avx-mpx-linux): New rules.
(i386/i386-avx-mpx-expedite, i386/i386-avx-mpx-linux-expedite)
(i386/amd64-avx-mpx-expedite, i386/amd64-avx-mpx-linux-expedite):
New expedites.
* i386-linux-tdep.c (features/i386/i386-avx-mpx-linux.c): New
include.
(i386_linux_core_read_description): Add case
X86_XSTATE_AVX_MPX_MASK.
(_initialize_i386_linux_tdep): Call
initialize_tdesc_i386_avx_mpx_linux.
* i386-linux-tdep.h (tdesc_i386_avx_mpx_linux): New include.
* i386-tdep.c (features/i386/i386-avx-mpx.c): New include.
(i386_target_description): Add case for X86_XSTATE_AVX_MPX_MASK.
* x86-linux-nat.c (x86_linux_read_description): Add case for
X86_XSTATE_AVX_MPX_MASK.
* features/i386/amd64-avx-mpx-linux.xml: New file.
* features/i386/i386-avx-mpx-linux.xml: New file.
* features/i386/i386-avx-mpx.xml: New file.
* features/i386/amd64-avx-mpx.xml: New file.
* features/i386/amd64-avx-mpx-linux.c: Generated.
* features/i386/amd64-avx-mpx.c: Generated.
* features/i386/i386-avx-mpx-linux.c: Generated.
* features/i386/i386-avx-mpx.c: Generated.
* regformats/i386/amd64-avx-mpx-linux.dat: Generated.
* regformats/i386/amd64-avx-mpx.dat: Generated.
* regformats/i386/i386-avx-mpx-linux.dat: Generated.
* regformats/i386/i386-avx-mpx.dat: Generated.
gdb/gdbserver/ChangeLog:
* Makefile.in (clean): Add removal for i386-avx-mpx.c,
i386-avx-mpx-linux.c, amd64-avx-mpx.c and amd64-avx-mpx-linux.c.
(i386-avx-mpx.c, i386-avx-mpx-linux.c, amd64-avx-mpx.c)
(amd64-avx-mpx-linux.c): New rules.
(amd64-avx-mpx-linux-ipa.o, i386-avx-mpx-linux-ipa.o): New rule.
* configure.srv (srv_i386_regobj): Add i386-avx-mpx.o.
(srv_i386_linux_regobj): Add i386-avx-mpx-linux.o.
(srv_amd64_regobj): Add amd64-avx-mpx.o.
(srv_amd64_linux_regobj): Add amd64-avx-mpx-linux.o.
(srv_i386_xmlfiles): Add i386/i386-avx-mpx.xml.
(srv_amd64_xmlfiles): Add i386/amd64-avx-mpx.xml.
(srv_i386_linux_xmlfiles): Add i386/i386-avx-mpx-linux.xml.
(srv_amd64_linux_xmlfiles): Add i386/amd64-avx-mpx-linux.xml.
(ipa_i386_linux_regobj): Add i386-avx-mpx-linux-ipa.o.
(ipa_amd64_linux_regobj): Add amd64-avx-mpx-linux-ipa.o.
* linux-x86-low.c (x86_linux_read_description): Add case for
X86_XSTATE_AVX_MPX_MASK.
(x86_get_ipa_tdesc_idx): Add cases for avx_mpx.
(initialize_low_arch): Call init_registers_amd64_avx_mpx_linux and
init_registers_i386_avx_mpx_linux.
* linux-i386-ipa.c (get_ipa_tdesc): Add case for avx_mpx.
(initialize_low_tracepoint): Call
init_registers_i386_avx_mpx_linux.
* linux-amd64-ipa.c (get_ipa_tdesc): Add case for avx_mpx.
(initialize_low_tracepoint): Call
init_registers_amd64_avx_mpx_linux.
* linux-x86-tdesc.h (X86_TDESC_AVX_MPX): New enum value.
(init_registers_amd64_avx_mpx_linux, tdesc_amd64_avx_mpx_linux)
(init_registers_i386_avx_mpx_linux, tdesc_i386_avx_mpx_linux): New
declarations.
Any time a caller calls query & friends / prompt_for_continue without
ensuring that gdb owns the terminal for input is a bug. So do that in
defaulted_query / prompt_for_continue directly instead.
An example of a case where we currently miss calling
target_terminal_ours is internal_error. Ever since defaulted_query
was made to use gdb_readline_callback, there's no way to answer the
internal error query if the internal error happens while the target is
has the terminal:
(gdb) c
Continuing.
.../src/gdb/linux-nat.c:1676: internal-error: linux_nat_resume: Assertion `dummy_counter < 10' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) _
Entering 'y' or 'n' does not work, GDB does not respond.
gdb/ChangeLog:
2016-04-12 Pedro Alves <palves@redhat.com>
PR gdb/19828
* gnu-nat.c (inf_validate_task_sc): Don't call
target_terminal_ours / target_terminal_inferior around query.
* i386-tdep.c (i386_record_lea_modrm, i386_process_record): Don't
call target_terminal_ours / target_terminal_inferior around
yquery.
* linux-record.c (record_linux_system_call): Don't call
target_terminal_ours / target_terminal_inferior around yquery.
* nto-procfs.c (interrupt_query): Don't call target_terminal_ours
/ target_terminal_inferior around query.
* record-full.c (record_full_check_insn_num): Remove
'set_terminal' parameter. Don't call target_terminal_ours /
target_terminal_inferior around query.
(record_full_message, record_full_registers_change)
(record_full_xfer_partial): Adjust.
* remote.c (interrupt_query): Don't call target_terminal_ours /
target_terminal_inferior around query.
* utils.c (defaulted_query): Install cleanup to restore target
terminal. Put target_terminal_ours_for_output in effect while
defaulted producing, and target_terminal_ours in in effect while
handling input.
(prompt_for_continue): Install cleanup to restore target terminal.
Put target_terminal_ours in in effect while handling input.
Alan Hayward
Simon Marchi
Tom Tromey
Markus Metzger
Yao Qi
Joel Brobecker
Ulrich Weigand
Simon Marchi
John Baldwin
Maciej W. Rozycki
Pedro Alves
Walfred Tedeschi
Michael Sturm
Luis Machado
Doug Evans
Trevor Saunders