A quite straightforward change. It does "fix" leaks in record-btrace.c,
although since this is only used in debug printing code, it has no real
world impact.
gdb/ChangeLog:
* target/waitstatus.h (target_waitstatus_to_string): Change
return type to std::string.
* target/waitstatus.c (target_waitstatus_to_string): Return
std::string.
* target.h (target_waitstatus_to_string): Remove declaration.
* infrun.c (resume, clear_proceed_status_thread,
print_target_wait_results, do_target_wait, save_waitstatus,
stop_all_threads): Adjust.
* record-btrace.c (record_btrace_wait): Adjust.
* target-debug.h
(target_debug_print_struct_target_waitstatus_p): Adjust.
gdb/gdbserver/ChangeLog:
* linux-low.c (linux_wait_1): Adjust.
* server.c (queue_stop_reply_callback): Adjust.
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
When testing with "maint set target-non-stop on", a few
threading-related tests expose an issue that requires new RSP packets.
Say there are 3 threads running, 1-3. If GDB tries to stop thread 1,
2 and 3, and then waits for their stops, but meanwhile say, thread 2
exits, GDB hangs forever waiting for a stop for thread 2 that won't
ever happen.
This patch fixes the issue by adding support for thread exit events to
the protocol. However, we don't want these always enabled, as they're
useless most of the time, and would slow down remote debugging. So I
made it so that GDB can enable/disable them, and then made gdb do that
around the cases that need it, which currently is only
infrun.c:stop_all_threads.
In turn, if we have thread exit events, then the extra "thread x
exited" traffic slows down attach-many-short-lived-threads.exp enough
that gdb has trouble keeping up with new threads that are spawned
while gdb tries to stop existing ones. To fix that I added support
for the counterpart thread created events too. Enabling those when we
try to stop threads ensures that new threads never get a chance to
themselves start new threads, killing the race.
gdb/doc/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Remote Configuration): List "set/show remote
thread-events" command in configuration table.
(Stop Reply Packets): Document "T05 create" stop
reason and 'w' stop reply.
(General Query Packets): Document QThreadEvents packet. Document
QThreadEvents qSupported feature.
gdb/gdbserver/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* linux-low.c (handle_extended_wait): Assert that the LWP's
waitstatus is TARGET_WAITKIND_IGNORE. If GDB wants to hear about
thread create events, leave the new child's status pending.
(linux_low_filter_event): If GDB wants to hear about thread exit
events, leave the LWP marked dead and don't delete it.
(linux_wait_for_event_filtered): Don't check for thread exit.
(filter_exit_event): New function.
(linux_wait_1): Use it, when returning an exit event.
(linux_resume_one_lwp_throw): Assert that the LWP's
waitstatus is TARGET_WAITKIND_IGNORE.
* remote-utils.c (prepare_resume_reply): Handle
TARGET_WAITKIND_THREAD_CREATED and TARGET_WAITKIND_THREAD_EXITED.
* server.c (report_thread_events): New global.
(handle_general_set): Handle QThreadEvents.
(handle_query) <qSupported>: Handle and report QThreadEvents+;
(handle_target_event): Handle TARGET_WAITKIND_THREAD_CREATED and
TARGET_WAITKIND_THREAD_EXITED.
* server.h (report_thread_events): Declare.
gdb/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* NEWS (New commands): Mention "set/show remote thread-events"
commands.
(New remote packets): Mention thread created/exited stop reasons
and QThreadEvents packet.
* infrun.c (disable_thread_events): New function.
(stop_all_threads): Disable/enable thread create/exit events.
Handle TARGET_WAITKIND_THREAD_EXITED.
(handle_inferior_event_1): Handle TARGET_WAITKIND_THREAD_CREATED
and TARGET_WAITKIND_THREAD_EXITED.
* remote.c (remove_child_of_pending_fork): Also remove threads of
threads that have TARGET_WAITKIND_THREAD_EXITED events.
(remote_parse_stop_reply): Handle "create" magic register. Handle
'w' stop reply.
(initialize_remote): Install remote_thread_events as
to_thread_events target hook.
(remote_thread_events): New function.
* target-delegates.c: Regenerate.
* target.c (target_thread_events): New function.
* target.h (struct target_ops) <to_thread_events>: New field.
(target_thread_events): Declare.
* target/waitstatus.c (target_waitstatus_to_string): Handle
TARGET_WAITKIND_THREAD_CREATED and TARGET_WAITKIND_THREAD_EXITED.
* target/waitstatus.h (enum target_waitkind)
<TARGET_WAITKIND_THREAD_CREATED, TARGET_WAITKIND_THREAD_EXITED):
New values.
Ref: https://sourceware.org/ml/gdb-patches/2015-07/msg00868.html
This adds a test that has a multithreaded program have several threads
continuously fork, while another thread continuously steps over a
breakpoint.
This exposes several intertwined issues, which this patch addresses:
- When we're stopping and suspending threads, some thread may fork,
and we missed setting its suspend count to 1, like we do when a new
clone/thread is detected. When we next unsuspend threads, the fork
child's suspend count goes below 0, which is bogus and fails an
assertion.
- If a step-over is cancelled because a signal arrives, but then gdb
is not interested in the signal, we pass the signal straight back
to the inferior. However, we miss that we need to re-increment the
suspend counts of all other threads that had been paused for the
step-over. As a result, other threads indefinitely end up stuck
stopped.
- If a detach request comes in just while gdbserver is handling a
step-over (in the test at hand, this is GDB detaching the fork
child), gdbserver internal errors in stabilize_thread's helpers,
which assert that all thread's suspend counts are 0 (otherwise we
wouldn't be able to move threads out of the jump pads). The
suspend counts aren't 0 while a step-over is in progress, because
all threads but the one stepping past the breakpoint must remain
paused until the step-over finishes and the breakpoint can be
reinserted.
- Occasionally, we see "BAD - reinserting but not stepping." being
output (from within linux_resume_one_lwp_throw). That was because
GDB pokes memory while gdbserver is busy with a step-over, and that
suspends threads, and then re-resumes them with proceed_one_lwp,
which missed another reason to tell linux_resume_one_lwp that the
thread should be set back to stepping.
- In a couple places, we were resuming threads that are meant to be
suspended. E.g., when a vCont;c/s request for thread B comes in
just while gdbserver is stepping thread A past a breakpoint. The
resume for thread B must be deferred until the step-over finishes.
- The test runs with both "set detach-on-fork" on and off. When off,
it exercises the case of GDB detaching the fork child explicitly.
When on, it exercises the case of gdb resuming the child
explicitly. In the "off" case, gdb seems to exponentially become
slower as new inferiors are created. This is _very_ noticeable as
with only 100 inferiors gdb is crawling already, which makes the
test take quite a bit to run. For that reason, I've disabled the
"off" variant for now.
gdb/ChangeLog:
2015-08-06 Pedro Alves <palves@redhat.com>
* target/waitstatus.h (enum target_stop_reason)
<TARGET_STOPPED_BY_SINGLE_STEP>: New value.
gdb/gdbserver/ChangeLog:
2015-08-06 Pedro Alves <palves@redhat.com>
* linux-low.c (handle_extended_wait): Set the fork child's suspend
count if stopping and suspending threads.
(check_stopped_by_breakpoint): If stopped by trace, set the LWP's
stop reason to TARGET_STOPPED_BY_SINGLE_STEP.
(linux_detach): Complete an ongoing step-over.
(lwp_suspended_inc, lwp_suspended_decr): New functions. Use
throughout.
(resume_stopped_resumed_lwps): Don't resume a suspended thread.
(linux_wait_1): If passing a signal to the inferior after
finishing a step-over, unsuspend and re-resume all lwps. If we
see a single-step event but the thread should be continuing, don't
pass the trap to gdb.
(stuck_in_jump_pad_callback, move_out_of_jump_pad_callback): Use
internal_error instead of gdb_assert.
(enqueue_pending_signal): New function.
(check_ptrace_stopped_lwp_gone): Add debug output.
(start_step_over): Use internal_error instead of gdb_assert.
(complete_ongoing_step_over): New function.
(linux_resume_one_thread): Don't resume a suspended thread.
(proceed_one_lwp): If the LWP is stepping over a breakpoint, reset
it stepping.
gdb/testsuite/ChangeLog:
2015-08-06 Pedro Alves <palves@redhat.com>
* gdb.threads/forking-threads-plus-breakpoint.exp: New file.
* gdb.threads/forking-threads-plus-breakpoint.c: New file.
This commit moves the inclusion of common-utils.h to common-defs.h and
removes all other inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include common-utils.h.
* defs.h: Do not include common-utils.h.
* common/gdb_assert.h: Likewise.
* darwin-nat.h: Likewise.
* nat/linux-btrace.c: Likewise.
* target/waitstatus.h: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include common-utils.h.
This commit moves the inclusion of ptid.h to common-defs.h and removes
all other inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include ptid.h.
* defs.h: Do not include ptid.h.
* inferior.h: Likewise.
* infrun.h: Likewise.
* nat/linux-btrace.h: Likewise.
* nat/linux-osdata.h: Likewise.
* target/waitstatus.h: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include ptid.h.
* notif.h: Likewise.
* Makefile.in (SFILES): Remove common/target-common.c and
add target/waitstatus.c.
(HFILES_NO_SRCDIR): Remove common/target-common.h and add
target/resume.h, target/wait.h and target/waitstatus.h.
(COMMON_OBS): Remove target-common.o and add
waitstatus.o.
(target-common.o): Remove.
(waitstatus.o): New target object file.
* common/target-common.c: Move contents to
target/waitstatus.c and remove.
* common/target-common.h: Move contents to other files and
remove.
(enum resume_kind: Move to target/resume.h.
(TARGET_WNOHANG): Move to target/wait.h.
(enum target_waitkind): Move to target/waitstatus.h.
(struct target_waitstatus): Likewise.
* target.h: Do not include target-common.h and
include target/resume.h, target/wait.h and
target/waitstatus.h.
* target/resume.h: New file.
* target/wait.h: New file.
* target/waitstatus.h: New file.
* target/waitstatus.c: New file.
gdb/gdbserver/
* Makefile.in (INCLUDE_CFLAGS): Include -I$(srcdir)/../.
(SFILES): Remove $(srcdir)/common/target-common.c and
add $(srcdir)/target/waitstatus.c.
(OBS): Remove target-common.o and add waitstatus.o.
(server_h): Remove $(srcdir)/../common/target-common.h and
add $(srcdir)/../target/resume.h, $(srcdir)/../target/wait.h
and $(srcdir)/../target/waitstatus.h.
(target-common.o): Remove.
(waitstatus.o): New target object file.
* target.h: Do not include target-common.h and
include target/resume.h, target/wait.h and
target/waitstatus.h.
Joel Brobecker
Simon Marchi
Pedro Alves
Gary Benson
Luis Machado