This patch uses GDB self test in GDBserver. The self tests are run if
GDBserver is started with option --selftest.
gdb:
2017-08-18 Yao Qi <yao.qi@linaro.org>
* NEWS: Mention GDBserver's new option "--selftest".
* Makefile.in (SFILES): Remove selftest.c, add common/selftest.c.
* selftest.c: Move it to common/selftest.c.
* selftest.h: Move it to common/selftest.h.
* selftest-arch.c (reset): New function.
(tests_with_arch): Call reset.
gdb/gdbserver:
2017-08-18 Yao Qi <yao.qi@linaro.org>
* Makefile.in (OBS): Add selftest.o.
* configure.ac: AC_DEFINE GDB_SELF_TEST if $development.
* configure, config.in: Re-generated.
* server.c: Include common/sefltest.h.
(captured_main): Handle option --selftest.
gdb/testsuite:
2017-08-18 Yao Qi <yao.qi@linaro.org>
* gdb.server/unittest.exp: New.
gdb/doc:
2017-08-18 Yao Qi <yao.qi@linaro.org>
* gdb.texinfo (Server): Document "--selftest".
When I made commit 9a6c7d9c02, which
C++-fied gdb/common/environ.[ch], I mistakenly altered the behaviour
of the 'unset environment' command. This command, which should delete
all environment variables, is now resetting the list of variables to
the state they were when GDB was started.
This commit fixes this regression, and also adds a test on
gdb.base/environ.exp which really checks if 'unset environment'
worked.
gdb/ChangeLog:
2017-08-15 Sergio Durigan Junior <sergiodj@redhat.com>
PR gdb/21954
* infcmd.c (unset_environment_command): Use the 'clear' method on
the environment instead of resetting it.
gdb/testsuite/ChangeLog:
2017-08-15 Sergio Durigan Junior <sergiodj@redhat.com>
PR gdb/21954
* gdb.base/environ.exp: Add test to check if 'unset environment'
works.
Newer GCC versions yield colored diagnostic messages by default, which may
be useful when executing GDB interactively from a terminal. But when run
from a GDB test case, the compiler output is written into gdb.log, where
such escape sequences are usually more inhibiting than helpful to the
evaluation of test results. So this patch suppresses that.
gdb/testsuite/ChangeLog:
* lib/gdb.exp (universal_compile_options): New caching proc.
(gdb_compile): Suppress GCC's coloring of messages.
PR gdb/21675 points out a few regressions in scalar printing.
One type of regression is due to not carrying over the old handling of
floating point printing -- where a format like "/d" causes a floating
point number to first be cast to a signed integer. This patch restores
this behavior.
The other regression is a longstanding bug in print_octal_chars: one of
the constants was wrong. This patch fixes the constant and adds static
asserts to help catch this sort of error.
ChangeLog
2017-08-14 Tom Tromey <tom@tromey.com>
PR gdb/21675
* valprint.c (LOW_ZERO): Change value to 034.
(print_octal_chars): Add static_asserts for octal constants.
* printcmd.c (print_scalar_formatted): Add 'd' case.
testsuite/ChangeLog
2017-08-14 Tom Tromey <tom@tromey.com>
PR gdb/21675:
* gdb.base/printcmds.exp (test_radices): New function.
* gdb.dwarf2/var-access.exp: Use p/u, not p/d.
* gdb.base/sizeof.exp (check_valueof): Use p/d.
* lib/gdb.exp (get_integer_valueof): Use p/d.
The get_valueof procedure allows tests to conveniently make gdb evaluate
an expression an return the value as a string. However, it includes an
end-of-line character in its result. I stumbled on this when trying to
use that result as part of a regex further in a test.
You can see this for example by adding a puts in
gdb.dwarf2/implref-struct.exp:get_members:
set members [get_valueof "" ${var} ""]
puts "<$members>"
The output is
<{a = 0, b = 1, c = 2}
>
This is because the regex in get_valueof is too greedy, the captured
portion matches anything up to the gdb_prompt, including the end of line
characters. This patch changes it to capture everything but end of line
characters.
The output of the puts becomes:
<{a = 0, b = 1, c = 2}>
I tested this by running gdb.dwarf2/implref-array.exp and
gdb.dwarf2/implref-struct.exp, the two only current users of that
procedure.
gdb/testsuite/ChangeLog:
* lib/gdb.exp (get_valueof): Don't capture end-of-line
characters.
I ran the gdb.rust tests against Rust 1.20 (beta) and saw a few
failures. The failures all came because a particular item moved to a
different module. Since the particular choice of module name isn't
important here, I simply widened the allowable results.
Tested locally against rustc 1.19, 1.20, and 1.21.
testsuite/ChangeLog
2017-08-05 Tom Tromey <tom@tromey.com>
* gdb.rust/simple.exp: Allow String to appear in a different
namespace.
Now, GDB is able to dynamically create i386-linux target descriptions
from features, instead of using pre-generated target descriptions. These
pre-generated target descriptions are no longer used by GDB (note that
they are still used by GDBserver).
This patch add a new maint command "maint check xml-descriptions" to test
dynamically generated tdesc are identical to these generated from xml files.
gdb:
2017-07-26 Yao Qi <yao.qi@linaro.org>
* cli/cli-cmds.c (maintenancechecklist): New variable.
* gdbcmd.h (maintenancechecklist): Declare it.
* i386-linux-tdep.c (_initialize_i386_linux_tdep) [GDB_SELF_TEST]:
Call i386_linux_read_description with different masks.
* maint.c (maintenance_check_command): New function.
(_initialize_maint_cmds): Call add_prefix_cmd.
* target-descriptions.c (tdesc_reg): override operator != and ==.
(tdesc_type): Likewise.
(tdesc_feature): Likewise.
(target_desc): Likewise.
[GDB_SELF_TEST] (selftests::record_xml_tdesc): New function.
(maintenance_check_xml_descriptions): New function.
(_initialize_target_descriptions) Add command "xml-descriptions".
* target-descriptions.h (selftests::record_xml_tdesc): Declare.
gdb/testsuite:
2017-07-26 Yao Qi <yao.qi@linaro.org>
* gdb.gdb/unittest.exp: Invoke command
"maintenance check xml-descriptions".
gdb/doc:
2017-07-26 Yao Qi <yao.qi@linaro.org>
* gdb.texinfo (Maintenance Commands): Document command
"maint check xml-descriptions".
PR 21555 is caused by the exception during the prologue analysis when re-set
a breakpoint.
(gdb) bt
#0 memory_error_message (err=TARGET_XFER_E_IO, gdbarch=0x153db50, memaddr=93824992233232) at ../../binutils-gdb/gdb/corefile.c:192
#1 0x00000000005718ed in memory_error (err=TARGET_XFER_E_IO, memaddr=memaddr@entry=93824992233232) at ../../binutils-gdb/gdb/corefile.c:220
#2 0x00000000005719d6 in read_memory_object (object=object@entry=TARGET_OBJECT_CODE_MEMORY, memaddr=93824992233232, memaddr@entry=1, myaddr=myaddr@entry=0x7fffffffd0a0 "P\333S\001", len=len@entry=1) at ../../binutils-gdb/gdb/corefile.c:259
#3 0x0000000000571c6e in read_code (len=1, myaddr=0x7fffffffd0a0 "P\333S\001", memaddr=<optimized out>) at ../../binutils-gdb/gdb/corefile.c:287
#4 read_code_unsigned_integer (memaddr=memaddr@entry=93824992233232, len=len@entry=1, byte_order=byte_order@entry=BFD_ENDIAN_LITTLE) at ../../binutils-gdb/gdb/corefile.c:362
#5 0x000000000041d4a0 in amd64_analyze_prologue (gdbarch=gdbarch@entry=0x153db50, pc=pc@entry=93824992233232, current_pc=current_pc@entry=18446744073709551615, cache=cache@entry=0x7fffffffd1e0) at ../../binutils-gdb/gdb/amd64-tdep.c:2310
#6 0x000000000041e404 in amd64_skip_prologue (gdbarch=0x153db50, start_pc=93824992233232) at ../../binutils-gdb/gdb/amd64-tdep.c:2459
#7 0x000000000067bfb0 in skip_prologue_sal (sal=sal@entry=0x7fffffffd4e0) at ../../binutils-gdb/gdb/symtab.c:3628
#8 0x000000000067c4d8 in find_function_start_sal (sym=sym@entry=0x1549960, funfirstline=1) at ../../binutils-gdb/gdb/symtab.c:3501
#9 0x000000000060999d in symbol_to_sal (result=result@entry=0x7fffffffd5f0, funfirstline=<optimized out>, sym=sym@entry=0x1549960) at ../../binutils-gdb/gdb/linespec.c:3860
....
#16 0x000000000054b733 in location_to_sals (b=b@entry=0x15792d0, location=0x157c230, search_pspace=search_pspace@entry=0x1148120, found=found@entry=0x7fffffffdc64) at ../../binutils-gdb/gdb/breakpoint.c:14211
#17 0x000000000054c1f5 in breakpoint_re_set_default (b=0x15792d0) at ../../binutils-gdb/gdb/breakpoint.c:14301
#18 0x00000000005412a9 in breakpoint_re_set_one (bint=bint@entry=0x15792d0) at ../../binutils-gdb/gdb/breakpoint.c:14412
This problem can be fixed by
- either each prologue analyzer doesn't throw exception,
- or catch the exception thrown from gdbarch_skip_prologue,
I choose the latter because the former needs to fix *every* prologue
analyzer to not throw exception.
This error can be reproduced by changing reread.exp. The test reread.exp
has already test that breakpoint can be reset correctly after the
executable is re-read. This patch extends this test by compiling test c
file with and without -fPIE.
(gdb) run ^M
The program being debugged has been started already.^M
Start it from the beginning? (y or n) y^M
x86_64/gdb/testsuite/outputs/gdb.base/reread/reread' has changed; re-reading symbols.
Error in re-setting breakpoint 1: Cannot access memory at address 0x555555554790^M
Error in re-setting breakpoint 2: Cannot access memory at address 0x555555554790^M
Starting program: /scratch/yao/gdb/build-git/x86_64/gdb/testsuite/outputs/gdb.base/reread/reread ^M
This is foo^M
[Inferior 1 (process 27720) exited normally]^M
(gdb) FAIL: gdb.base/reread.exp: opts= "-fPIE" "ldflags=-pie" : run to foo() second time (the program exited)
This patch doesn't re-indent the code, to keep the patch simple.
gdb:
2017-07-25 Yao Qi <yao.qi@linaro.org>
PR gdb/21555
* arch-utils.c (gdbarch_skip_prologue_noexcept): New function.
* arch-utils.h (gdbarch_skip_prologue_noexcept): Declare.
* infrun.c: Include arch-utils.h
(handle_step_into_function): Call gdbarch_skip_prologue_noexcept.
(handle_step_into_function_backward): Likewise.
* symtab.c (skip_prologue_sal): Likewise.
gdb/testsuite:
2017-07-25 Yao Qi <yao.qi@linaro.org>
PR gdb/21555
* gdb.base/reread.exp: Wrap the whole test with two kinds of
compilation flags, with -fPIE and without -fPIE.
s390-vregs.exp yields a Tcl error:
ERROR: can't read "i": no such variable
while executing
"expr $a_high * ($i + 1) * $a_high "
(procedure "hex128" line 2)
invoked from within
"hex128 $a_high $a_low $b_high $b_low"
...
This is a regression, caused by commit 30a254669b -- "Don't always
zero pad in print_*_chars". That patch introduced a new procedure
"hex128" for formatting a 128-bit value as hex, but it accidentally moved
the calculation of the 128-bit value into that new procedure as well
instead of leaving it in the original context. This is fixed.
gdb/testsuite/ChangeLog:
* gdb.arch/s390-vregs.exp: Calculate parameters to hex128 in the
calling context.
(hex128): Drop erroneous calculation of parameters.
[I made some typo fixes but forgot to amend my commit before sending the patch,
hence this v2.]
I see the following failure on Ubuntu 16.04's gcc 5.4.0:
Running /home/emaisin/src/binutils-gdb/gdb/testsuite/gdb.python/py-unwind.exp ...
FAIL: gdb.python/py-unwind.exp: continue to breakpoint: break backtrace-broken
FAIL: gdb.python/py-unwind.exp: Backtrace restored by unwinder (pattern 1)
The problem is that the test expects a very particular stack layout.
When stack protection is enabled, it adds a canary value which looks
like an additional local variable. This makes the test complain about
a bad stack layout and fail.
The simple solution is to disable stack protection for that test using
-fno-stack-protector. I checked older compilers (gcc 4.4, clang 3.5)
and they support that flag, so I don't think it's necessary to probe for
whether the compiler supports it.
Maybe a better solution would be to change the test to make it cope with
different stack layouts (perhaps it could save addresses of stuff in
some global variables which GDB/the unwinder would read). I'll go with
the simple solution for now though.
gdb/testsuite/ChangeLog:
* gdb.python/py-unwind.exp: Disable stack protection when
building test file.
Profiling GDB with the rest of series applied, I saw calls to
language_def showing up high in some runs. The problem is that
language_def is O(N) currently, since walk the languages vector each
time to find the matching language_defn.
IMO, the add_language mechanism is pointless, because "enum language"
implies the core of GDB needs to know about all languages anyway. So
simply make the languages vector array be an array where each
element's index is the corresponding enum language enumerator. Note
that "local_language_defn" is gone along the way. It's just a copy of
"auto", so the new code simply maps one to the other. One fewer place
to update when we need to change the language vector...
Also, a while ago the output of "set language" was made out of order
as side effect of some other change. While I was at it, I made them
sorted again.
gdb/ChangeLog:
2017-07-20 Pedro Alves <palves@redhat.com>
* ada-lang.c (ada_language_defn): Make extern.
(_initialize_ada_language): Remove add_language call.
* c-lang.c (c_language_defn, cplus_language_defn)
(asm_language_defn, minimal_language_defn): Make extern.
(_initialize_c_language): Delete.
* completer.c (compare_cstrings): Delete, moved to utils.h.
* d-lang.c (d_language_defn): Make extern.
(_initialize_d_language): Remove add_language calls.
* defs.h (enum language): Add comment.
* f-lang.c (f_language_defn): Make extern.
(_initialize_f_language): Remove add_language call.
* go-lang.c (go_language_defn): Make extern.
(_initialize_go_language): Remove add_language call.
* language.c: Include <algorithm>.
(languages): Redefine as const array.
(languages_size, languages_allocsize, DEFAULT_ALLOCSIZE): Delete.
(set_language_command): Handle "local". Use for-range loop.
(set_language): Remove loop.
(language_enum): Rewrite.
(language_def, language_str): Remove loops.
(add_language): Delete.
(add_set_language_command): New, based on add_languages.
(skip_language_trampoline): Adjust.
(local_language_defn): Delete.
(language_gdbarch_post_init): Adjust.
(_initialize_language): Remove add_language calls. Call
add_set_language_command.
* language.h (add_language): Delete.
(auto_language_defn)
(unknown_language_defn, minimal_language_defn, ada_language_defn)
(asm_language_defn, c_language_defn, cplus_language_defn)
(d_language_defn, f_language_defn, go_language_defn)
(m2_language_defn, objc_language_defn, opencl_language_defn)
(pascal_language_defn, rust_language_defn): Declare.
* m2-lang.c (m2_language_defn): Make extern.
(_initialize_m2_language): Remove add_language call.
* objc-lang.c (objc_language_defn): Make extern.
(_initialize_objc_language): Remove add_language call.
* opencl-lang.c (opencl_language_defn): Make extern.
(_initialize_opencl_language): Remove add_language call.
* p-lang.c (pascal_language_defn): Make extern.
(_initialize_pascal_language): Delete.
* rust-lang.c (rust_language_defn): Make extern.
(_initialize_rust_language): Delete.
* utils.h (compare_cstrings): New static inline function.
gdb/testsuite/ChangeLog:
2017-07-20 Pedro Alves <palves@redhat.com>
* gdb.base/default.exp (set language): Adjust expected output.
This test is using "set language ada" expecting that to cause GDB to
do Ada symbol name matching. That won't work when GDB uses the
symbol's language to decide which symbol matching algorithm to use,
because the test's symbols are C symbols.
So generalize the test a bit to not rely on Ada name matching rules.
Confirmed that by undoing the original fix the test was written for,
the test still fails.
gdb/testsuite/ChangeLog:
2017-07-20 Pedro Alves <palves@redhat.com>
* gdb.base/dmsym.c (pck__foo__bar__minsym): Rename to ...
(test_minsym): ... this, and make static.
(get_pck__foo__bar__minsym): Rename to ...
(get_test_minsym): ... this.
* gdb.base/dmsym.exp (): Remove "set language ada" call. Adjust
symbol names and comments.
* gdb.base/dmsym_main.c (get_pck__foo__bar__minsym): Rename to ...
(get_test_minsym): ... this.
(pck__foo__bar__minsym__2): Rename to ...
(test_minsym): ... this.
(main): Adjust.
Continuing the theme of the explicit locations patch, this patch gets
rid of the need for quoting function names in linespec TAB completion.
To recap, when you have overloads in your program, and you want to set
a breakpoint in one of them:
void function(int); // set breakpoint here.
void function(long);
(gdb) b function(i[TAB]
<all the symbols in the program that start with "i" are uselessly shown...>
This patch gets rid of the need for quoting by switching the linespec
completer to use the custom completion word point mechanism added in
the previous explicit location patch (extending it as needed), to
correctly determine the right completion word point. In the case
above, we want the completer to figure out that it's completing a
function name that starts with "function(i", and it now does.
We also want the completer to know when it's potentially completing a
source file name, for:
(gdb) break source.[TAB] -> source.c:
(gdb) break source.c: # Type line number or function name now
And we want it to know to complete label names, which it doesn't today:
(gdb) break function:lab[TAB]
etc., etc.
So what we want is for completion to grok the input string as closely
to how the linespec parser groks it.
With that in mind, the solution suggests itself - make the linespec
completer use the same parsing code as normal linespec parsing.
That's what the patch does. The old completer is replaced by one that
reuses the actual linespec parser as much as possible. This (ideally)
eliminate differences between what completion understands and actually
setting breakpoints understands by design.
The completer now offers sensible completion candidates depending on
which component of the linespec is being completed, source filename,
function, line number, expression, and (a new addition), labels. For
example, when completing the function part, we now show the full name
of the method as completion candidates, instead of showing whatever
comes after what readline considered the word break character:
(gdb) break klass::method[TAB]
klass:method1(int)
klass:method2()
If input is past the function, then we now offer keyword condidates:
(gdb) b function(int) [TAB]
if task thread
If input is past a keyword, we offer expression completion, which is
different from linespec completion:
(gdb) b main if 1 + glo[TAB]
global
(e.g., completes on types, struct data fields, etc.)
As mentioned, this teaches the linespec completer about completing
label symbols too:
(gdb) b source.c:function:lab[TAB]
A nice convenience is that when completion uniquely matches a source
name, gdb adds the ":" automatically for you:
(gdb) b filenam[TAB]
(gdb) b filename.c: # ':' auto-added, cursor right after it.
It's the little details. :-)
I worked on this patch in parallel with writing the (big) testcase
added closer to the end of the series, which exercises many many
tricky cases around quoting and whitespace insertion placement. In
general, I think it now all Just Works.
gdb/ChangeLog:
2017-07-17 Pedro Alves <palves@redhat.com>
* completer.c (complete_source_filenames): New function.
(complete_address_and_linespec_locations): New function.
(location_completer): Use complete_address_and_linespec_locations.
(completion_tracker::build_completion_result): Honor the tracker's
request to suppress append.
* completer.h (completion_tracker::suppress_append_ws)
(completion_tracker::set_suppress_append_ws): New methods.
(completion_tracker::m_suppress_append_ws): New field.
(complete_source_filenames): New declaration.
* linespec.c (linespec_complete_what): New.
(struct ls_parser) <complete_what, completion_word,
completion_quote_char, completion_quote_end, completion_tracker>:
New fields.
(string_find_incomplete_keyword_at_end): New.
(linespec_lexer_lex_string): Record quote char. If in completion
mode, don't throw.
(linespec_lexer_consume_token): Advance the completion word point.
(linespec_lexer_peek_token): Save/restore completion info.
(save_stream_and_consume_token): New.
(set_completion_after_number): New.
(linespec_parse_basic): Set what to complete next depending on
token. Handle function and label completions specially.
(parse_linespec): Disable objc shortcut in completion mode. Set
what to complete next depending on token type. Skip keyword if in
completion mode.
(complete_linespec_component, linespec_complete): New.
* linespec.h (linespec_complete): Declare.
gdb/testsuite/ChangeLog:
2017-07-17 Pedro Alves <palves@redhat.com>
* gdb.base/completion.exp: Adjust expected output.
* gdb.linespec/ls-errs.exp: Don't send tab characters, now that
the completer works.
One of the most annoying (to me) things about GDB's completion is when
you have overloads in your program, and you want to set a breakpoint
in one of them:
void function(int); // set breakpoint here.
void function(long);
(gdb) b -f func[TAB]
(gdb) b -f function( # ok, gdb completed as much as possible.
(gdb) b -f function([TAB] # show me the overloads, please.
<_all_ symbols in the program are shown...>
E.g., when debugging GDB, that'd be:
(gdb) b -f function([TAB]
(anonymous namespace)::get_global()::global pt_insn_get_offset@plt scm_new_port_table_entry
asprintf pt_pkt_alloc_decoder scm_new_port_table_entry@plt
asprintf@plt pt_pkt_alloc_decoder@plt scm_out_of_range
bt_ctf_get_char_array pt_pkt_sync_forward scm_out_of_range@plt
bt_ctf_get_char_array@plt pt_pkt_sync_forward@plt scm_putc
bt_ctf_get_uint64 pwrite scm_putc@plt
bt_ctf_get_uint64@plt pwrite@plt scm_reverse_x
bt_ctf_iter_read_event PyErr_Restore scm_reverse_x@plt
bt_ctf_iter_read_event@plt PyErr_Restore@plt scm_set_port_filename_x
<snip...>
Now that's a load of completely useless completions.
The reason GDB offers those is that the completer relies on readline
figuring out the completion word point in the input line based on the
language's word break characters, which include "(". So readline
tells the completer to complete on "", the string that is after '('.
Likewise, if you type "function(i[TAB]" to try to complete to "int",
you're out of luck. GDB shows you all the symbols in the program that
start with "i"... This makes sense for the expression completer, as
what you'd want to type is e.g., a global variable, say:
(gdb) print function(i[TAB]
but, it makes no sense when specifying a function name for a
breakpoint location.
To get around that limitation, users need to quote the function name,
like:
(gdb) b -f 'function([TAB]
function(int) function(long)
(gdb) b 'function(i[TAB]
(gdb) b 'function(int)' # now completes correctly!
Note that the quoting is only necessary for completion. Creating the
breakpoint does not require the quoting:
(gdb) b -f function(int) [RET]
Breakpoint 1 at ....
This patch removes this limitation.
(
Actually, it's a necessary patch, though not sufficient. That'll
start working correctly by the end of the series. With this patch, if try it,
you'll see:
(gdb) b -f function(i[TAB]
(gdb) b -f function
i.e., gdb strips everything after the "(". That's caused by some code
in symtab.c that'll be eliminated further down the series. These
patches are all unfortunately interrelated, which is also the reason
new tests only appear much later in the series.
But let's ignore that reality for the remainder of the description.
)
So... this patch gets rid of the need for quoting.
It does that by adding a way for a completer to control the exact
completion word point that readline should start the completion
request for, instead of letting readline try to figure it out using
the current language's word break chars array, and often failing.
In the case above, we want the completer to figure out that it's
completing a function name that starts with "function(i". It now
does.
It took me a while to figure out a way to ask readline to "use this
exact word point", and for a while I feared that it'd be impossible
with current readline (and having to rely on master readline for core
functionality is something I'd like to avoid very much). Eventually,
after several different attempts, I came up with what is described in
the comment above gdb_custom_word_point_brkchars in the patch.
With this patch, the handle_brkchars phase of the explicit location
completer advances the expected word point as it parses the input line
left to right, until it figures out exactly what we're completing,
instead of expecting readline to break the string using the word break
characters, and then having the completer heuristically fix up a bad
decision by parsing the input string backwards. This allows correctly
knowning that we're completing a symbol name after -function, complete
functions without quoting, etc.
Later, we'll make use of this same mechanims to implement a proper
linespec completer that avoids need for quoting too.
gdb/ChangeLog:
2017-07-17 Pedro Alves <palves@redhat.com>
* ada-lang.c (ada_collect_symbol_completion_matches): Add
complete_symbol_mode parameter.
* cli/cli-cmds.c (complete_command): Get the completion result out
of the handle_brkchars tracker if used a custom word point.
* completer.c: Include "linespec.h".
(enum explicit_location_match_type) <MATCH_LINE>: New enumerator.
(advance_to_expression_complete_word_point): New.
(completion_tracker::completes_to_completion_word): New.
(complete_files_symbols): Pass down
complete_symbol_mode::EXPRESSION.
(explicit_options, probe_options): New.
(collect_explicit_location_matches): Complete on the
explictit_loc->foo instead of word. Use
linespec_complete_function. Handle MATCH_LINE. Handle offering
keyword and options completions.
(backup_text_ptr): Delete.
(skip_keyword): New.
(complete_explicit_location): Remove 'word' parameter. Add
language, quoted_arg_start and quoted_arg_end parameters.
Rewrite, parsing left to right.
(location_completer): Rewrite.
(location_completer_handle_brkchars): New function.
(symbol_completer): Pass down complete_symbol_mode::EXPRESSION.
(enum complete_line_internal_reason): Adjust comments.
(completion_tracker::discard_completions): New.
(completer_handle_brkchars_func_for_completer): Handle
location_completer.
(gdb_custom_word_point_brkchars)
(gdb_org_rl_basic_quote_characters): New.
(gdb_completion_word_break_characters_throw)
(completion_find_completion_word): Handle trackers that use a
custom word point.
(completion_tracker::advance_custom_word_point_by): New.
(completion_tracker::build_completion_result): Don't rely on
readline appending the quote char.
(gdb_rl_attempted_completion_function_throw): Handle trackers that
use a custom word point.
(gdb_rl_attempted_completion_function): Restore
rl_basic_quote_characters.
* completer.h (class completion_tracker): Extend intro comment.
(completion_tracker::set_quote_char)
(completion_tracker::quote_char)
(completion_tracker::set_use_custom_word_point)
(completion_tracker::use_custom_word_point)
(completion_tracker::custom_word_point)
(completion_tracker::set_custom_word_point)
(completion_tracker::advance_custom_word_point_by)
(completion_tracker::completes_to_completion_word)
(completion_tracker::discard_completions): New methods.
(completion_tracker::m_quote_char)
(completion_tracker::m_use_custom_word_point)
(completion_tracker::m_custom_word_point): New fields.
(advance_to_expression_complete_word_point): Declare.
* f-lang.c (f_collect_symbol_completion_matches): Add
complete_symbol_mode parameter.
* language.h (struct language_defn)
<la_collect_symbol_completion_matches>: Add complete_symbol_mode
parameter.
* linespec.c (linespec_keywords): Add NULL terminator. Make extern.
(linespec_complete_function): New function.
(linespec_lexer_lex_keyword): Adjust.
* linespec.h (linespec_keywords, linespec_complete_function): New
declarations.
* location.c (find_end_quote): New function.
(explicit_location_lex_one): Add explicit_completion_info
parameter. Save quoting info. Don't throw if being called for
completion. Don't handle Ada operators here.
(is_cp_operator, skip_op_false_positives, first_of)
(explicit_location_lex_one_function): New function.
(string_to_explicit_location): Replace 'dont_throw' parameter with
an explicit_completion_info pointer parameter. Handle it. Don't
use explicit_location_lex_one to lex function names. Use
explicit_location_lex_one_function instead.
* location.h (struct explicit_completion_info): New.
(string_to_explicit_location): Replace 'dont_throw' parameter with
an explicit_completion_info pointer parameter.
* symtab.c (default_collect_symbol_completion_matches_break_on):
Add complete_symbol_mode parameter. Handle LINESPEC mode.
(default_collect_symbol_completion_matches)
(collect_symbol_completion_matches): Add complete_symbol_mode
parameter.
(collect_symbol_completion_matches_type): Pass down
complete_symbol_mode::EXPRESSION.
(collect_file_symbol_completion_matches): Add complete_symbol_mode
parameter. Handle LINESPEC mode.
* symtab.h (complete_symbol_mode): New.
(default_collect_symbol_completion_matches_break_on)
(default_collect_symbol_completion_matches)
(collect_symbol_completion_matches)
(collect_file_symbol_completion_matches): Add complete_symbol_mode
parameter.
gdb/testsuite/ChangeLog:
2017-07-17 Pedro Alves <palves@redhat.com>
* gdb.linespec/ls-errs.exp (do_test): Adjust expected output.
Make sure all of the tests have unique names in
gdb.mi/mi-vla-fortran.exp.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-vla-fortran.exp: Make test names unique.
PR rust/21764 notes that "sizeof" does not work correctly for all types
in Rust. The bug turns out to be an error in the conversion of the AST
to gdb expressions. This patch fixes the bug and also avoids generating
incorrect expressions in another case.
Tested on the buildbot. I'm checking this in.
2017-07-14 Tom Tromey <tom@tromey.com>
PR rust/21764:
* rust-exp.y (convert_ast_to_expression): Add "want_type"
parameter.
<UNOP_SIZEOF>: Split into separate case.
<UNOP_VAR_VALUE>: Handle want_type. Add error case.
2017-07-14 Tom Tromey <tom@tromey.com>
PR rust/21764:
* gdb.rust/simple.exp: Add tests.
PR rust/21763 points out that gdb.lookup_typename does not work properly
for (some) Rust types. I tracked this down to a missing case in
symbol_matches_domain.
Tested by the buildbot.
2017-07-14 Tom Tromey <tom@tromey.com>
PR rust/21763:
* symtab.c (symbol_matches_domain): Add language_rust to special
case.
* rust-exp.y (convert_ast_to_expression) <OP_VAR_VALUE>: Don't
treat LOC_TYPEDEF symbols as variables.
2017-07-14 Tom Tromey <tom@tromey.com>
* gdb.rust/simple.exp: Add regression test for PR rust/21763.
This is the same patch as posted at
<https://sourceware.org/ml/gdb-patches/2017-02/msg00644.html>, with
the test at
<https://sourceware.org/ml/gdb-patches/2017-02/msg00687.html> squashed
in.
This patch fixes:
-FAIL: gdb.base/completion.exp: tab complete break break.c:ma (timeout)
-FAIL: gdb.base/completion.exp: complete break break.c:ma
+PASS: gdb.base/completion.exp: tab complete break break.c:ma
+PASS: gdb.base/completion.exp: delete breakpoint for tab complete break break.c:ma
+PASS: gdb.base/completion.exp: complete break break.c:ma
When run with --target_board=dwarf4-gdb-index.
The issue here is that make_file_symbol_completion_list_1, used when
completing a symbol restricted to a given source file, uses
lookup_symtab to look up the symtab with the given name, and search
for matching symbols inside. This assumes that there's only one
symtab for the given source file. This is an incorrect assumption
with (for example) -fdebug-types-section, where we'll have an extra
extra symtab containing the types. lookup_symtab finds that symtab,
and inside that symtab there are no functions...
gdb/ChangeLog:
2017-07-14 Pedro Alves <palves@redhat.com>
* symtab.c (make_file_symbol_completion_list_1): Iterate over
symtabs matching all symtabs with SRCFILE as file name instead of
only considering the first hit, with lookup_symtab.
gdb/testsuite/ChangeLog:
2017-07-14 Pedro Alves <palves@redhat.com>
* gdb.linespec/base/one/thefile.cc (z1): New function.
* gdb.linespec/base/two/thefile.cc (z2): New function.
* gdb.linespec/linespec.exp: Add tests.
In the test gdb.mi/mi-vla-fortran.exp the parameters passed to
mi_create_breakpoint are passed in the wrong order. By good luck the
tests still passes, however the wrong test name is used. All fixed in
this commit.
A previous commit fixed most of these, but I missed this last one.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-vla-fortran.exp: Correct even more parameter passing
to mi_create_breakpoint.
In the test gdb.mi/mi-vla-fortran.exp the parameters passed to
mi_create_breakpoint are passed in the wrong order. By good luck the
tests still passes, however the wrong test name is used. All fixed in
this commit.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-vla-fortran.exp: Correct parameter passing to
mi_create_breakpoint.
Rationale behind the change instead of adding a `.init$' postfix being
that "initializer for symbol" is much more informative when inspecting D
runtime type information in gdb, which is the only place where you would
encounter references to this compiler-generated symbol.
gdb/testsuite/ChangeLog:
* gdb.dlang/demangle.exp: Update for demangling changes.
This Rust bug report:
https://github.com/rust-lang/rust/issues/41970
noted an error from gdb. What is happening here (for me, the original
report had a different error) is that a pieced DWARF expression is not
writing to every byte in the resulting value. GDB errors in this
case. However, it seems to me that it is always valid to write fewer
bytes; the issue comes from writing too many -- that is, the test is
reversed. The test was also checking the sub-object, but this also
seems incorrect, as it's expected for the expression to write the
entirety of the enclosing object. So, this patch reverses the test
and applies it to the outer type, not the subobject type.
Regtested on the buildbot.
gdb/ChangeLog
2017-07-09 Tom Tromey <tom@tromey.com>
* dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Reverse size
check and apply to outer type.
gdb/testsuite/ChangeLog
2017-07-09 Tom Tromey <tom@tromey.com>
* gdb.dwarf2/shortpiece.exp: New file.
In some cases a compiler may produce a single object file (& thus single
DWO file) representing multiple source files. The most common example of
this is in whole program optimization (such as LLVM's LTO). Fission may
still be a beneficial feature to use here - to avoid the need to
read/link the debug info with system libraries and the like.
This change adds basic support for multiple CUs in a single DWO file to
support LLVM's output in this situation.
There is still outstanding work to design and implement a solution for
cross-CU references (usually using DW_FORM_ref_addr) in this scenario.
For now LLVM works around this by duplicating DIEs rather than making
cross-CU references in DWO files. This degrades debugger
behavior/quality especially for file-local entities.
2017-07-06 David Blaikie <dblaikie@gmail.com>
* dwarf2read.c (struct dwo_file): Use a htab of dwo_unit* (rather than
a singular dwo_unit*) to support multiple CUs in the same way that
multiple TUs are supported.
(create_cus_hash_table): Replace create_dwo_cu with a function for
parsing multiple CUs from a DWO file.
(open_and_init_dwo_file): Use create_cus_hash_table rather than
create_dwo_cu.
(lookup_dwo_cutu): Lookup CU in the hash table in the dwo_file with
htab_find, rather than comparing the signature to a singleton CU in
the dwo_file.
2017-07-06 David Blaikie <dblaikie@gmail.com>
* gdb.dwarf2/fission-multi-cu.S: Test containing multiple CUs in a DWO,
built from fissiont-multi-cu{1,2}.c.
* gdb.dwarf2/fission-multi-cu.exp: Test similar to fission-base.exp,
except putting 'main' and 'func' in separate CUs in the same DWO file.
* gdb.dwarf2/fission-multi-cu1.c: First CU for the multi-CU-single-DWO
test.
* gdb.dwarf2/fission-multi-cu2.c: Second CU in the multi-CU-single-DWO
test.
The gdb.python/py-unwind.exp test is crashing GDB / leaving core dumps
in the test dir, even though it all passes cleanly. The crash is not
visible in gdb.sum/gdb.log because it happens as side effect of the
"quit" command, while flushing the frame cache.
The problem is simply a typo in a 'for' loop's condition, introduced
by a recent change [4fa847d78e ("Remove MAX_REGISTER_SIZE from
py-unwind.c")], resulting in infinite loop / double-free.
The new test exposes the crash, like:
Running src/gdb/testsuite/gdb.python/py-unwind.exp ...
ERROR: Process no longer exists
gdb/ChangeLog:
2017-07-06 Pedro Alves <palves@redhat.com>
* python/py-unwind.c (pyuw_dealloc_cache): Fix for loop condition.
gdb/testsuite/ChangeLog:
2017-07-06 Pedro Alves <palves@redhat.com>
* gdb.python/py-unwind.exp: Test flushregs.
My last commit fixed a regression that happened when using
inline/multi-line commands for Python/Compile/Guile, but introduced
another regression: it is now not possible to use aliases for the
commands mentioned above. The fix is to almost revert the change I've
made and go back to using the 'struct cmd_list_element *', but at the
same time make sure that we advance the 'cmd_name' variable past all
the whitespace characters after the command name. If, after skipping
the whitespace, we encounter a '\0', it means that the command is not
inline. Otherwise, it is.
This patch also expands the testcase in order to check for aliases and
for trailing whitespace after the command name.
gdb/ChangeLog:
2017-06-30 Sergio Durigan Junior <sergiodj@redhat.com>
Pedro Alves <palves@redhat.com>
PR cli/21688
* cli/cli-script.c (command_name_equals_not_inline): Remove function.
(process_next_line): New variable 'inline_cmd'.
Adjust 'if' clauses for "python", "compile" and "guile" to use
'command_name_equals' and check for '!inline_cmd'.
gdb/testsuite/ChangeLog:
2017-06-30 Sergio Durigan Junior <sergiodj@redhat.com>
PR cli/21688
* gdb.python/py-cmd.exp (test_python_inline_or_multiline): Add new
tests for alias commands and trailing whitespace.
This bug is a regression caused by the following commit:
604c4576fd is the first bad commit
commit 604c4576fd
Author: Jerome Guitton <guitton@adacore.com>
Date: Tue Jan 10 15:15:53 2017 +0100
The problem happens because, on cli/cli-script.c:process_next_line,
GDB is not using the command line string to identify which command to
run, but it instead using the 'struct cmd_list_element *' that is
obtained by using the mentioned string. The problem with that is that
the 'struct cmd_list_element *' doesn't have any information on
whether the command issued by the user is a multi-line or inline one.
A multi-line command is a command that will necessarily be composed of
more than 1 line. For example:
(gdb) if 1
>python
>print ('hello')
>end
>end
As can be seen in the example above, the 'python' command actually
"opens" a new command line (represented by the change in the
indentation) that will then be used to enter Python code. OTOH, an
inline command is a command that is "self-contained" in a single line,
for example:
(gdb) if 1
>python print ('hello')
>end
This Python command is a one-liner, and therefore there is no other
Python code that can be entered for this same block. There is also no
change in the indentation.
So, the fix is somewhat simple: we have to revert the change and use
the full command line string passed to process_next_line in order to
identify whether we're dealing with a multi-line or an inline command.
This commit does just that. As can be seen, this regression also
affects other languages, like guile or the compile framework. To make
things clearer, I decided to create a new helper function responsible
for identifying a non-inline command.
Testcase is attached.
gdb/ChangeLog:
2017-06-30 Sergio Durigan Junior <sergiodj@redhat.com>
PR cli/21688
* cli/cli-script.c (command_name_equals_not_inline): New function.
(process_next_line): Adjust 'if' clauses for "python", "compile"
and "guile" to use command_name_equals_not_inline.
gdb/testsuite/ChangeLog:
2017-06-30 Sergio Durigan Junior <sergiodj@redhat.com>
PR cli/21688
* gdb.python/py-cmd.exp (test_python_inline_or_multiline): New
procedure. Call it.
This commit fixes a mismatch between what "print" command completer
thinks the command understands, and what the command actually
understands.
The explicit location options are understood by commands that take
(linespecs and) explicit locations as argument. I.e, breakpoint
commands, and "list". For example:
(gdb) b -source file.c -function my_func
So for those commands, it makes sense that the completer
completes:
"b -sour[TAB]" -> "b -source "
"b -functi[TAB]" -> "b -function "
etc.
However, completion for commands that take expressions (not
linespecs/locations) as arguments, such as the "print" command, also
completes the explicit location options, even though those switches
aren't really understood by these commands. Instead, "-foo" is
understood as an expression applying unary minus on a symbol named
"foo" (think "print -1"):
(gdb) p -func[TAB]
(gdb) p -function [RET]
No symbol "function" in current context.
The patch fixes this by having the expression_completer function
bypass the function that completes explicit locations.
New regression tests included.
gdb/ChangeLog:
2017-06-29 Pedro Alves <palves@redhat.com>
* completer.c (expression_completer): Call
linespec_location_completer instead of location_completer.
gdb/testsuite/ChangeLog:
2017-06-29 Pedro Alves <palves@redhat.com>
* gdb.base/printcmds.exp: Add tests.
Fix issue exposed by commit 3e29f34.
The basic issue is that section data referenced through an objfile
pointer can also be referenced via the program-space data pointer,
although via a separate mapping mechanism, which is set up by
update_section_map. Thus once section data attached to an objfile
pointer is released, the section map associated with the program-space
data pointer must be marked dirty to ensure that update_section_map is
called to prevent stale data being referenced. For the matter at hand
this marking is being done via a call to objfiles_changed.
Before commit 3e29f34 objfiles_changed could be called after all of
the objfile pointers were processed in reread_symbols since section
data references via the program-space data pointer would not occur in
the calls of read_symbols performed by reread_symbols.
With commit 3e29f34 MIPS target specific calls to find_pc_section were
added to the code for DWARF information processing, which is called
via read_symbols. Thus in reread_symbols the call to objfiles_changed
needs to be called before calling read_symbols, otherwise stale
section data can be referenced.
Thanks to Luis Machado for providing text for the main comment
associated with the change.
gdb/
2017-06-28 Doug Gilmore <Doug.Gilmore@imgtec.com>
PR gdb/21337
* symfile.c (reread_symbols): Call objfiles_changed just before
read_symbols.
gdb/testsuite/
2017-06-28 Doug Gilmore <Doug.Gilmore@imgtec.com>
PR gdb/21337
* gdb.base/reread-readsym.exp: New file.
* gdb.base/reread-readsym.c: New file.
This is the portion of gdb_test which performs the match against
the RE (regular expression) passed to it:
return [gdb_test_multiple $command $message {
-re "\[\r\n\]*($pattern)\[\r\n\]+$gdb_prompt $" {
if ![string match "" $message] then {
pass "$message"
}
}
In a test that I've been working on recently, I wanted to use
a backreference - that's the \1 in the the RE below:
gdb_test "info threads" \
{.*[\r\n]+\* +([0-9]+) +Thread[^\r\n]* do_something \(n=\1\) at.*}
Put into English, I wanted to make sure that the value of n passed to
do_something() is the same as the thread number shown in the "info
threads" Id column. (I've structured the test case so that this
*should* be the case.)
It didn't work though. It turned out that ($pattern) in the RE
noted above is capturing the attempted backreference. So, in this
case, the backreference does not refer to ([0-9]+) as intended, but
instead refers to ($pattern). This is wrong because it's not what I
intended, but is also wrong because, if allowed, it could only match a
string of infinite length.
This problem can be fixed by using parens for a "noncapturing
subpattern". The way that this is done, syntactically, is to use
(?:$pattern) instead of ($pattern).
My research shows that this feature has been present since tcl8.1 which
was released in 1999.
The current tcl version is 8.6 - at least that's what I have on my
machine. It appears to me that mingw uses some subversion of tcl8.4
which will also have this feature (since 8.4 > 8.1).
So it seems to me that any platform upon which we might wish to test
GDB will have a version of tcl which has this feature. That being the
case, my hope is that there won't be any objections to its use.
When I looked at the implementation of gdb_test, I wondered whether
the parens were needed at all. I've concluded that they are. In the
event that $pattern is an RE which uses alternation at the top level,
e.g. a|b, we need to make $pattern a subpattern (via parens) to limit
the extend of the alternation. I.e, we don't want the alternation to
extend to the other portions of the RE which gdb_test uses to match
potential blank lines at the beginning of the pattern or the gdb
prompt at the end.
gdb/testsuite/ChangeLog:
* gdb.exp (gdb_test): Using noncapturing parens for the $pattern
subpattern.
When I added the new lnia extended mnemonic for addpcis, I updated the
assembler/disassembler test cases, but overlooked the GDB test cases.
This patch fixes that oversight and associated test case failure.
* gdb.arch/powerpc-power9.exp: Update test case for new lnia
extended mnemonic.
* gdb.arch/powerpc-power9.s: Likewise.
The new test var-access.exp causes FAILs on i686. This is because the
test chooses the wrong name for DWARF register number 1: It uses
"edx" (which corresponds to DWARF register number 2), but should have used
"ecx" instead.
Also, the current logic in var-access.exp does not correctly distinguish
between a 64-bit and a 32-bit program on an x86-64 target. It uses the
64-bit register names for both.
These problems are fixed. In order to address the latter, the convenience
macros is_*_target are exploited where appropriate.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/var-access.exp: Use register name ecx instead of edx
on 32-bit x86 targets. Exploit is_*_target macros where
appropriate.
So far GDB ignores the piece offset of all kinds of DWARF bit
pieces (DW_OP_bit_piece) and treats such pieces as if the offset was zero.
This is fixed, and an appropriate test is added.
gdb/ChangeLog:
* dwarf2loc.c (read_pieced_value): Respect the piece offset, as
given by DW_OP_bit_piece.
(write_pieced_value): Likewise.
Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.dwarf2/var-access.exp: Add test for composite location with
nonzero piece offsets.
For big-endian targets the logic in read/write_pieced_value tries to take
a register piece from the LSB end. This requires offsets and sizes to be
adjusted accordingly, and that's where the current implementation has some
issues:
* The formulas for recalculating the bit- and byte-offsets into the
register are wrong. They just happen to yield correct results if
everything is byte-aligned and the piece's last byte belongs to the
given value.
* After recalculating the bit offset into the register, the number of
bytes to be copied from the register is not recalculated. Of course
this does not matter if everything (particularly the piece size) is
byte-aligned.
These issues are fixed. The size calculation is performed with a new
helper function bits_to_bytes().
gdb/ChangeLog:
* dwarf2loc.c (bits_to_bytes): New function.
(read_pieced_value): Fix offset calculations for register pieces
on big-endian targets.
(write_pieced_value): Likewise.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/var-access.exp: Add test for non-byte-aligned
register pieces.
This verifies some of the previous fixes to the logic in
write_pieced_value when accessing bit-fields.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/var-access.exp: Add tests for accessing bit-fields
located in one or more DWARF pieces.
The test suite contains multiple instances of determining the target's
endianness with GDB's "show endian" command. This patch replaces these by
an invocation of a new convenience proc 'get_endianness'.
gdb/testsuite/ChangeLog:
* lib/gdb.exp (get_endianness): New proc.
* gdb.arch/aarch64-fp.exp: Use it.
* gdb.arch/altivec-regs.exp: Likewise.
* gdb.arch/e500-regs.exp: Likewise.
* gdb.arch/vsx-regs.exp: Likewise.
* gdb.base/dump.exp: Likewise.
* gdb.base/funcargs.exp: Likewise.
* gdb.base/gnu_vector.exp: Likewise.
* gdb.dwarf2/formdata16.exp: Likewise.
* gdb.dwarf2/implptrpiece.exp: Likewise.
* gdb.dwarf2/nonvar-access.exp: Likewise.
* gdb.python/py-inferior.exp: Likewise.
* gdb.trace/unavailable-dwarf-piece.exp: Likewise.
When taking a DW_OP_piece or DW_OP_bit_piece from a DW_OP_stack_value, the
existing logic always takes the piece from the lowest-addressed end, which
is wrong on big-endian targets. The DWARF standard states that the
"DW_OP_bit_piece operation describes a sequence of bits using the least
significant bits of that value", and this also matches the current logic
in GCC. For instance, the GCC guality test case pr54970.c fails on s390x
because of this.
This fix adjusts the piece accordingly on big-endian targets. It is
assumed that:
* DW_OP_piece shall take the piece from the LSB end as well;
* pieces reaching outside the stack value bits are considered undefined,
and a zero value can be used instead.
gdb/ChangeLog:
PR gdb/21226
* dwarf2loc.c (read_pieced_value): Anchor stack value pieces at
the LSB end, independent of endianness.
gdb/testsuite/ChangeLog:
PR gdb/21226
* gdb.dwarf2/nonvar-access.exp: Add checks for verifying that
stack value pieces are taken from the LSB end.
A field f in a structure composed of DWARF pieces may be located in
multiple pieces, where the first and last of those may contain bits from
other fields as well. So when writing to f, the beginning of the first
and the end of the last of those pieces may have to be skipped. But the
logic in write_pieced_value for handling one of those pieces is flawed
when the first and last piece are the same, i.e., f is contained in a
single piece:
< - - - - - - - - - piece_size - - - - - - - - - ->
+-------------------------------------------------+
| skipped_bits | f_bits | / / / / / / / / / / |
+-------------------------------------------------+
The current logic determines the size of the sub-piece to operate on by
limiting the piece size to the bit size of f and then subtracting the
skipped bits:
min (piece_size, f_bits) - skipped_bits
Instead of:
min (piece_size - skipped_bits, f_bits)
So the resulting sub-piece size is corrupted, leading to wrong handling of
this piece in write_pieced_value.
Note that the same bug was already found in read_pieced_value and fixed
there (but not in write_pieced_value), see PR 15391.
This patch swaps the calculations, bringing them into the same (correct)
order as in read_pieced_value.
gdb/ChangeLog:
* dwarf2loc.c (write_pieced_value): Fix order of calculations for
size capping.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/var-pieces.exp: Add test case for modifying a
variable at nonzero offset.
This adds a test for read/write access to variables with various types of
DWARF locations. It uses register- and memory locations and composite
locations with register- and memory pieces.
Since the new test calls gdb_test_no_output with commands that contain
braces, it is necessary for string_to_regexp to quote braces as well.
This was not done before.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/var-access.c: New file.
* gdb.dwarf2/var-access.exp: New test.
* lib/gdb-utils.exp (string_to_regexp): Quote braces as well.
This unifies the two switches in print_scalar_formatted, removing some
now-redundant code. Now scalar types are never converted to LONGEST,
instead printing is done using print_*_chars, operating on the byte
representation.
ChangeLog
2017-06-12 Tom Tromey <tom@tromey.com>
* printcmd.c (print_scalar_formatted): Unify the two switches.
Don't convert scalars to LONGEST.
2017-06-12 Tom Tromey <tom@tromey.com>
* gdb.arch/altivec-regs.exp: Expect decimal results for uint128.
This patch implements the proper support for the "startup-with-shell"
feature on gdbserver. A new packet is added, QStartupWithShell, and
it is sent on initialization. If the host sends a
"QStartupWithShell:1", it means the inferior shall be started using a
shell. If the host sends a "QStartupWithShell:0", it means the
inferior shall be started without using a shell. Any other value is
considered an error.
There is no way to remotely set the shell that will be used by the
target to start the inferior. In order to do that, the user must
start gdbserver while providing a shell via the $SHELL environment
variable. The same is true for the host side.
The "set startup-with-shell" setting from the host side is used to
decide whether to start the remote inferior using a shell. This same
setting is also used to decide whether to use a shell to start the
host inferior; this means that it is not really possible to start the
inferior using different mechanisms on target and host.
A documentation patch is included, along with a new testcase for the
feature.
gdb/ChangeLog:
2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com>
* NEWS (Changes since GDB 8.0): Announce that GDBserver is now
able to start inferiors using a shell.
(New remote packets): Announce new packet "QStartupWithShell".
* remote.c: Add PACKET_QStartupWithShell.
(extended_remote_create_inferior): Handle new
PACKET_QStartupWithShell.
(remote_protocol_features) <QStartupWithShell>: New entry for
PACKET_QStartupWithShell.
(_initialize_remote): Call "add_packet_config_cmd" for
QStartupShell.
gdb/gdbserver/ChangeLog:
2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com>
* server.c (handle_general_set): Handle new packet
"QStartupWithShell".
(handle_query): Add "QStartupWithShell" to the list of supported
packets.
(gdbserver_usage): Add help text explaining the
new "--startup-with-shell" and "--no-startup-with-shell" CLI
options.
(captured_main): Recognize and act upon the presence of the new
CLI options.
gdb/testsuite/ChangeLog:
2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.base/startup-with-shell.c: New file.
* gdb.base/startup-with-shell.exp: Likewise.
gdb/doc/ChangeLog:
2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.texinfo (Starting) <startup-with-shell>: Add @anchor.
(Connecting) <Remote Packet>: Add "startup-with-shell"
and "QStartupWithShell" to the table.
(Remote Protocol) <QStartupWithShell>: New item, explaining the
packet.
This is the most important (and the biggest, sorry) patch of the
series. It moves fork_inferior from gdb/fork-child.c to
nat/fork-inferior.c and makes all the necessary adjustments to both
GDB and gdbserver to make sure everything works OK.
There is no "most important change" with this patch; all changes are
made in a progressive way, making sure that gdbserver had the
necessary features while not breaking GDB at the same time.
I decided to go ahead and implement a partial support for starting the
inferior with a shell on gdbserver, although the full feature comes in
the next patch. The user won't have the option to disable the
startup-with-shell, and also won't be able to change which shell
gdbserver will use (other than setting the $SHELL environment
variable, that is).
Everything is working as expected, and no regressions were present
during the tests.
gdb/ChangeLog:
2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com>
Pedro Alves <palves@redhat.com>
* Makefile.in (HFILES_NO_SRCDIR): Add "common/common-inferior.h"
and "nat/fork-inferior.h".
* common/common-inferior.h: New file, with contents from
"gdb/inferior.h".
* commom/common-utils.c: Include "common-utils.h".
(stringify_argv): New function.
* common/common-utils.h (stringify_argv): New prototype.
* configure.nat: Add "fork-inferior.o" as a dependency for
"*linux*", "fbsd*" and "nbsd*" hosts.
* corefile.c (get_exec_file): Update comment.
* darwin-nat.c (darwin_ptrace_him): Call "gdb_startup_inferior"
instead of "startup_inferior".
(darwin_create_inferior): Call "add_thread_silent" after
"fork_inferior".
* fork-child.c: Cleanup unnecessary includes.
(SHELL_FILE): Move to "common/common-fork-child.c".
(environ): Likewise.
(exec_wrapper): Initialize.
(get_exec_wrapper): New function.
(breakup_args): Move to "common/common-fork-child.c"; rename to
"breakup_args_for_exec".
(escape_bang_in_quoted_argument): Move to
"common/common-fork-child.c".
(saved_ui): New variable.
(prefork_hook): New function.
(postfork_hook): Likewise.
(postfork_child_hook): Likewise.
(gdb_startup_inferior): Likewise.
(fork_inferior): Move to "common/common-fork-child.c". Update
function to support gdbserver.
(startup_inferior): Likewise.
* gdbcore.h (get_exec_file): Remove declaration.
* gnu-nat.c (gnu_create_inferior): Call "gdb_startup_inferior"
instead of "startup_inferior". Call "add_thread_silent" after
"fork_inferior".
* inf-ptrace.c: Include "nat/fork-inferior.h" and "utils.h".
(inf_ptrace_create_inferior): Call "gdb_startup_inferior"
instead of "startup_inferior". Call "add_thread_silent" after
"fork_inferior".
* inferior.h: Include "common-inferior.h".
(trace_start_error): Move to "common/common-utils.h".
(trace_start_error_with_name): Likewise.
(fork_inferior): Move prototype to "nat/fork-inferior.h".
(startup_inferior): Likewise.
(gdb_startup_inferior): New prototype.
* nat/fork-inferior.c: New file, with contents from "fork-child.c".
* nat/fork-inferior.h: New file.
* procfs.c (procfs_init_inferior): Call "gdb_startup_inferior"
instead of "startup_inferior". Call "add_thread_silent" after
"fork_inferior".
* target.h (target_terminal_init): Move prototype to
"target/target.h".
(target_terminal_inferior): Likewise.
(target_terminal_ours): Likewise.
* target/target.h (target_terminal_init): New prototype, moved
from "target.h".
(target_terminal_inferior): Likewise.
(target_terminal_ours): Likewise.
* utils.c (gdb_flush_out_err): New function.
gdb/gdbserver/ChangeLog:
2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com>
Pedro Alves <palves@redhat.com>
* Makefile.in (SFILES): Add "nat/fork-inferior.o".
* configure: Regenerate.
* configure.srv (srv_linux_obj): Add "fork-child.o" and
"fork-inferior.o".
(i[34567]86-*-lynxos*): Likewise.
(spu*-*-*): Likewise.
* fork-child.c: New file.
* linux-low.c: Include "common-inferior.h", "nat/fork-inferior.h"
and "environ.h".
(linux_ptrace_fun): New function.
(linux_create_inferior): Adjust function prototype to reflect
change on "target.h". Adjust function code to use
"fork_inferior".
(linux_request_interrupt): Delete "signal_pid".
* lynx-low.c: Include "common-inferior.h" and "nat/fork-inferior.h".
(lynx_ptrace_fun): New function.
(lynx_create_inferior): Adjust function prototype to reflect
change on "target.h". Adjust function code to use
"fork_inferior".
* nto-low.c (nto_create_inferior): Adjust function prototype and
code to reflect change on "target.h". Update comments.
* server.c: Include "common-inferior.h", "nat/fork-inferior.h",
"common-terminal.h" and "environ.h".
(terminal_fd): Moved to fork-child.c.
(old_foreground_pgrp): Likewise.
(restore_old_foreground_pgrp): Likewise.
(last_status): Make it global.
(last_ptid): Likewise.
(our_environ): New variable.
(startup_with_shell): Likewise.
(program_name): Likewise.
(program_argv): Rename to...
(program_args): ...this.
(wrapper_argv): New variable.
(start_inferior): Delete function.
(get_exec_wrapper): New function.
(get_exec_file): Likewise.
(get_environ): Likewise.
(prefork_hook): Likewise.
(post_fork_inferior): Likewise.
(postfork_hook): Likewise.
(postfork_child_hook): Likewise.
(handle_v_run): Update code to deal with arguments coming from the
remote host. Update calls from "start_inferior" to
"create_inferior".
(captured_main): Likewise. Initialize environment variable. Call
"have_job_control".
* server.h (post_fork_inferior): New prototype.
(get_environ): Likewise.
(last_status): Declare.
(last_ptid): Likewise.
(signal_pid): Likewise.
* spu-low.c: Include "common-inferior.h" and "nat/fork-inferior.h".
(spu_ptrace_fun): New function.
(spu_create_inferior): Adjust function prototype to reflect change
on "target.h". Adjust function code to use "fork_inferior".
* target.c (target_terminal_init): New function.
(target_terminal_inferior): Likewise.
(target_terminal_ours): Likewise.
* target.h: Include <vector>.
(struct target_ops) <create_inferior>: Update prototype.
(create_inferior): Update macro.
* utils.c (gdb_flush_out_err): New function.
* win32-low.c (win32_create_inferior): Adjust function prototype
and code to reflect change on "target.h".
gdb/testsuite/ChangeLog:
2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.server/non-existing-program.exp: Update regex in order to
reflect the fact that gdbserver is now using fork_inferior (with a
shell) to startup the inferior.
This test requires calling a function in the inferior, and therefore it
doesn't make sense to run it if the target doesn't support calling
functions from GDB.
gdb/testsuite/ChangeLog:
* gdb.base/watch-cond-infcall.exp: Don't run if target doesn't
support function calls from GDB.
It's a bit difficult to create an unsized array type in Rust, but if
you do, right now ptype will show something like "[u8; ]". It really
should print "[u8]", though, which is what this patch implements.
This is part of PR 21466.
Built and regtested on x86-64 Fedora 25. I'm checking this in.
ChangeLog
2017-05-21 Tom Tromey <tom@tromey.com>
PR rust/21466:
* rust-lang.c (rust_print_type) <TYPE_CODE_ARRAY>: Print unsized
arrays as "[T]", not "[T; ]".
testsuite/ChangeLog
2017-05-21 Tom Tromey <tom@tromey.com>
PR rust/21466:
* gdb.rust/unsized.exp: New file.
* gdb.rust/unsized.rs: New file.
PR rust/21484 notes that watch -location does not work with Rust:
(gdb) watch -location a
syntax error in expression, near `) 0x00007fffffffe0f4'.
update_watchpoint tries to tell gdb that the new expression it creates
has C syntax:
/* The above expression is in C. */
b->language = language_c;
However, update_watchpoint doesn't actually use this language when
re-parsing the expression.
Originally I was going to fix this by saving and restoring the
language in update_watchpoint, but this regressed
gdb.dlang/watch-loc.exp, because the constructed expression actually
has D syntax (specifically the name is not parseable by C).
Next I looked at directly constructing an expression, and not relying
on the parser at all; but it seemed to me that upon a re-set, we'd
want to reparse the type, and there is no existing API to do this
correctly.
So, in the end I made a hook to let each language choose what
expression to use. I made all the languages other than Rust use the C
expression, because that is the status quo ante. However, this is
probably not truly correct. After this patch, at least, it is easy to
correct by someone who knows the language(s) in question.
Regtested by the buildbot.
ChangeLog
2017-05-19 Tom Tromey <tom@tromey.com>
PR rust/21484:
* rust-lang.c (exp_descriptor_rust): New function.
(rust_language_defn): Use it.
* p-lang.c (pascal_language_defn): Update.
* opencl-lang.c (opencl_language_defn): Update.
* objc-lang.c (objc_language_defn): Update.
* m2-lang.c (m2_language_defn): Update.
* language.h (struct language_defn)
<la_watch_location_expression>: New member.
* language.c (unknown_language_defn, auto_language_defn)
(local_language_defn): Update.
* go-lang.c (go_language_defn): Update.
* f-lang.c (f_language_defn): Update.
* d-lang.c (d_language_defn): Update.
* c-lang.h (c_watch_location_expression): Declare.
* c-lang.c (c_watch_location_expression): New function.
(c_language_defn, cplus_language_defn, asm_language_defn)
(minimal_language_defn): Use it.
* breakpoint.c (watch_command_1): Call
la_watch_location_expression.
* ada-lang.c (ada_language_defn): Update.
testsuite/ChangeLog
2017-05-19 Tom Tromey <tom@tromey.com>
PR rust/21484:
* gdb.rust/watch.exp: New file.
* gdb.rust/watch.rs: New file.
With Rust 1.18 and 1.19, I saw some test suite failures. They were
all of the same form -- Box seems to be qualified in the output now,
like:
print box_some
$64 = core::option::Option<alloc::boxed::Box<u8>>::Some(0x7ffff6c21018 "\001\000")
... where the test was expecting Option<Box<u8>>.
This patch fixes the problem in a way that should work with earlier
versions of Rust.
gdb/testsuite/ChangeLog
2017-05-18 Tom Tromey <tom@tromey.com>
* gdb.rust/simple.exp: Allow Box to be qualified.
src/gdb/testsuite/gdb.base/fileio.c: In function ‘test_write’:
src/gdb/testsuite/gdb.base/fileio.c:158:5: warning: ‘ret’ may be used uninitialized in this function [-Wmaybe-uninitialized]
printf ("write 1: ret = %d, errno = %d\n", ret, errno);
^
gdb/ChangeLog:
2017-05-18 Pedro Alves <palves@redhat.com>
* gdb.base/fileio.c (test_write, test_read, test_close)
(test_fstat): Don't print 'ret' in the fail path.
All the "test_" functions warn like:
src/gdb/testsuite/gdb.base/fileio.c: In function ‘test_close’:
src/gdb/testsuite/gdb.base/fileio.c:280:1: warning: control reaches end of non-void function [-Wreturn-type]
}
^
Nothing looks at the return of these functions, so just make them
return void. While at it, "()" is not the same as "(void)" in C - fix
that too.
gdb/ChangeLog:
2017-05-18 Pedro Alves <palves@redhat.com>
* gdb.base/fileio.c (stop, test_open, test_write, test_read)
(test_lseek, test_close, test_stat, test_fstat, test_isatty)
(test_system, test_rename, test_unlink, test_time): Change
prototypes.
* gdb.base/fileio.exp (stop_msg): Adjust.
Yao Qi
Sergio Durigan Junior
Andreas Arnez
Tom Tromey
Simon Marchi
Pedro Alves
Andrew Burgess
Iain Buclaw
David Blaikie
Doug Gilmore
Kevin Buettner
Peter Bergner
Thomas Preud'homme