This changes a few more places to use scoped_restore, allowing some
cleanup removals.
gdb/ChangeLog
2017-04-12 Tom Tromey <tom@tromey.com>
* mi/mi-main.c (exec_direction_forward): Remove.
(exec_reverse_continue, mi_execute_command): Use scoped_restore.
* guile/scm-ports.c (ioscm_with_output_to_port_worker): Use
scoped_restore.
* guile/guile.c (guile_repl_command, guile_command)
(gdbscm_execute_gdb_command): Use scoped_restore.
* go-exp.y (go_parse): Use scoped_restore.
* d-exp.y (d_parse): Use scoped_restore.
* cli/cli-decode.c (cmd_func): Use scoped_restore.
* c-exp.y (c_parse): Use scoped_restore.
This patch starts from the desire to eliminate
make_cleanup_ui_file_delete, but then goes beyond. It makes ui_file &
friends a real C++ class hierarchy, and switches temporary
ui_file-like objects to stack-based allocation.
- mem_fileopen -> string_file
mem_fileopen is replaced with a new string_file class that is treated
as a value class created on the stack. This alone eliminates most
make_cleanup_ui_file_delete calls, and, simplifies code a whole lot
(diffstat shows around 1k loc dropped.)
string_file's internal buffer is a std::string, thus the "string" in
the name. This simplifies the implementation much, compared to
mem_fileopen, which managed growing its internal buffer manually.
- ui_file_as_string, ui_file_strdup, ui_file_obsavestring all gone
The new string_file class has a string() method that provides direct
writable access to the internal std::string buffer. This replaced
ui_file_as_string, which forced a copy of the same data the stream had
inside. With direct access via a writable reference, we can instead
move the string out of the string_stream, avoiding deep string
copying.
Related, ui_file_xstrdup calls are replaced with xstrdup'ping the
stream's string, and ui_file_obsavestring is replaced by
obstack_copy0.
With all those out of the way, getting rid of the weird ui_file_put
mechanism was possible.
- New ui_file::printf, ui_file::puts, etc. methods
These simplify / clarify client code. I considered splitting
client-code changes, like these, e.g.:
- stb = mem_fileopen ();
- fprintf_unfiltered (stb, "%s%s%s",
- _("The valid values are:\n"),
- regdesc,
- _("The default is \"std\"."));
+ string_file stb;
+ stb.printf ("%s%s%s",
+ _("The valid values are:\n"),
+ regdesc,
+ _("The default is \"std\"."));
In two steps, with the first step leaving fprintf_unfiltered (etc.)
calls in place, and only afterwards do a pass to change all those to
call stb.printf etc.. I didn't do that split, because (when I tried),
it turned out to be pointless make-work: the first pass would have to
touch the fprintf_unfiltered line anyway, to replace "stb" with
"&stb".
- gdb_fopen replaced with stack-based objects
This avoids the need for cleanups or unique_ptr's. I.e., this:
struct ui_file *file = gdb_fopen (filename, "w");
if (filename == NULL)
perror_with_name (filename);
cleanups = make_cleanup_ui_file_delete (file);
// use file.
do_cleanups (cleanups);
is replaced with this:
stdio_file file;
if (!file.open (filename, "w"))
perror_with_name (filename);
// use file.
- odd contorsions in null_file_write / null_file_fputs around when to
call to_fputs / to_write eliminated.
- Global null_stream object
A few places that were allocating a ui_file in order to print to
"nowhere" are adjusted to instead refer to a new 'null_stream' global
stream.
- TUI's tui_sfileopen eliminated. TUI's ui_file much simplified
The TUI's ui_file was serving a dual purpose. It supported being used
as string buffer, and supported being backed by a stdio FILE. The
string buffer part is gone, replaced by using of string_file. The
'FILE *' support is now much simplified, by making the TUI's ui_file
inherit from stdio_file.
gdb/ChangeLog:
2017-02-02 Pedro Alves <palves@redhat.com>
* ada-lang.c (type_as_string): Use string_file.
* ada-valprint.c (ada_print_floating): Use string_file.
* ada-varobj.c (ada_varobj_scalar_image)
(ada_varobj_get_value_image): Use string_file.
* aix-thread.c (aix_thread_extra_thread_info): Use string_file.
* arm-tdep.c (_initialize_arm_tdep): Use string_printf.
* breakpoint.c (update_inserted_breakpoint_locations)
(insert_breakpoint_locations, reattach_breakpoints)
(print_breakpoint_location, print_one_detail_ranged_breakpoint)
(print_it_watchpoint): Use string_file.
(save_breakpoints): Use stdio_file.
* c-exp.y (oper): Use string_file.
* cli/cli-logging.c (set_logging_redirect): Use ui_file_up and
tee_file.
(pop_output_files): Use delete.
(handle_redirections): Use stdio_file and tee_file.
* cli/cli-setshow.c (do_show_command): Use string_file.
* compile/compile-c-support.c (c_compute_program): Use
string_file.
* compile/compile-c-symbols.c (generate_vla_size): Take a
'string_file &' instead of a 'ui_file *'.
(generate_c_for_for_one_variable): Take a 'string_file &' instead
of a 'ui_file *'. Use string_file.
(generate_c_for_variable_locations): Take a 'string_file &'
instead of a 'ui_file *'.
* compile/compile-internal.h (generate_c_for_for_one_variable):
Take a 'string_file &' instead of a 'ui_file *'.
* compile/compile-loc2c.c (push, pushf, unary, binary)
(print_label, pushf_register_address, pushf_register)
(do_compile_dwarf_expr_to_c): Take a 'string_file &' instead of a
'ui_file *'. Adjust.
* compile/compile.c (compile_to_object): Use string_file.
* compile/compile.h (compile_dwarf_expr_to_c)
(compile_dwarf_bounds_to_c): Take a 'string_file &' instead of a
'ui_file *'.
* cp-support.c (inspect_type): Use string_file and obstack_copy0.
(replace_typedefs_qualified_name): Use string_file and
obstack_copy0.
* disasm.c (gdb_pretty_print_insn): Use string_file.
(gdb_disassembly): Adjust reference the null_stream global.
(do_ui_file_delete): Delete.
(gdb_insn_length): Use null_stream.
* dummy-frame.c (maintenance_print_dummy_frames): Use stdio_file.
* dwarf2loc.c (dwarf2_compile_property_to_c)
(locexpr_generate_c_location, loclist_generate_c_location): Take a
'string_file &' instead of a 'ui_file *'.
* dwarf2loc.h (dwarf2_compile_property_to_c): Likewise.
* dwarf2read.c (do_ui_file_peek_last): Delete.
(dwarf2_compute_name): Use string_file.
* event-top.c (gdb_setup_readline): Use stdio_file.
* gdbarch.sh (verify_gdbarch): Use string_file.
* gdbtypes.c (safe_parse_type): Use null_stream.
* guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Use
string_file.
* guile/scm-disasm.c (gdbscm_print_insn_from_port): Take a
'string_file *' instead of a 'ui_file *'.
(gdbscm_arch_disassemble): Use string_file.
* guile/scm-frame.c (frscm_print_frame_smob): Use string_file.
* guile/scm-ports.c (class ioscm_file_port): Now a class that
inherits from ui_file.
(ioscm_file_port_delete, ioscm_file_port_rewind)
(ioscm_file_port_put): Delete.
(ioscm_file_port_write): Rename to ...
(ioscm_file_port::write): ... this. Remove file_port_magic
checks.
(ioscm_file_port_new): Delete.
(ioscm_with_output_to_port_worker): Use ioscm_file_port and
ui_file_up.
* guile/scm-type.c (tyscm_type_name): Use string_file.
* guile/scm-value.c (vlscm_print_value_smob, gdbscm_value_print):
Use string_file.
* infcmd.c (print_return_value_1): Use string_file.
* infrun.c (print_target_wait_results): Use string_file.
* language.c (add_language): Use string_file.
* location.c (explicit_to_string_internal): Use string_file.
* main.c (captured_main_1): Use null_file.
* maint.c (maintenance_print_architecture): Use stdio_file.
* mi/mi-cmd-stack.c (list_arg_or_local): Use string_file.
* mi/mi-common.h (struct mi_interp) <out, err, log, targ,
event_channel>: Change type to mi_console_file pointer.
* mi/mi-console.c (mi_console_file_fputs, mi_console_file_flush)
(mi_console_file_delete): Delete.
(struct mi_console_file): Delete.
(mi_console_file_magic): Delete.
(mi_console_file_new): Delete.
(mi_console_file::mi_console_file): New.
(mi_console_file_delete): Delete.
(mi_console_file_fputs): Delete.
(mi_console_file::write): New.
(mi_console_raw_packet): Delete.
(mi_console_file::flush): New.
(mi_console_file_flush): Delete.
(mi_console_set_raw): Rename to ...
(mi_console_file::set_raw): ... this.
* mi/mi-console.h (class mi_console_file): New class.
(mi_console_file_new, mi_console_set_raw): Delete.
* mi/mi-interp.c (mi_interpreter_init): Use mi_console_file.
(mi_set_logging): Use delete and tee_file. Adjust.
* mi/mi-main.c (output_register): Use string_file.
(mi_cmd_data_evaluate_expression): Use string_file.
(mi_cmd_data_read_memory): Use string_file.
(mi_cmd_execute, print_variable_or_computed): Use string_file.
* mi/mi-out.c (mi_ui_out::main_stream): New.
(mi_ui_out::rewind): Use main_stream and
string_file.
(mi_ui_out::put): Use main_stream and string_file.
(mi_ui_out::mi_ui_out): Remove 'stream' parameter.
Allocate a 'string_file' instead.
(mi_out_new): Don't allocate a mem_fileopen stream here.
* mi/mi-out.h (mi_ui_out::mi_ui_out): Remove 'stream' parameter.
(mi_ui_out::main_stream): Declare method.
* printcmd.c (eval_command): Use string_file.
* psymtab.c (maintenance_print_psymbols): Use stdio_file.
* python/py-arch.c (archpy_disassemble): Use string_file.
* python/py-breakpoint.c (bppy_get_commands): Use string_file.
* python/py-frame.c (frapy_str): Use string_file.
* python/py-framefilter.c (py_print_type, py_print_single_arg):
Use string_file.
* python/py-type.c (typy_str): Use string_file.
* python/py-unwind.c (unwind_infopy_str): Use string_file.
* python/py-value.c (valpy_str): Use string_file.
* record-btrace.c (btrace_insn_history): Use string_file.
* regcache.c (regcache_print): Use stdio_file.
* reggroups.c (maintenance_print_reggroups): Use stdio_file.
* remote.c (escape_buffer): Use string_file.
* rust-lang.c (rust_get_disr_info): Use string_file.
* serial.c (serial_open_ops_1): Use stdio_file.
(do_serial_close): Use delete.
* stack.c (print_frame_arg): Use string_file.
(print_frame_args): Remove local mem_fileopen stream, not used.
(print_frame): Use string_file.
* symmisc.c (maintenance_print_symbols): Use stdio_file.
* symtab.h (struct symbol_computed_ops) <generate_c_location>:
Take a 'string_file *' instead of a 'ui_file *'.
* top.c (new_ui): Use stdio_file and stderr_file.
(free_ui): Use delete.
(execute_command_to_string): Use string_file.
(quit_confirm): Use string_file.
* tracepoint.c (collection_list::append_exp): Use string_file.
* tui/tui-disasm.c (tui_disassemble): Use string_file.
* tui/tui-file.c: Don't include "ui-file.h".
(enum streamtype, struct tui_stream): Delete.
(tui_file_new, tui_file_delete, tui_fileopen, tui_sfileopen)
(tui_file_isatty, tui_file_rewind, tui_file_put): Delete.
(tui_file::tui_file): New method.
(tui_file_fputs): Delete.
(tui_file_get_strbuf): Delete.
(tui_file::puts): New method.
(tui_file_adjust_strbuf): Delete.
(tui_file_flush): Delete.
(tui_file::flush): New method.
* tui/tui-file.h: Tweak intro comment.
Include ui-file.h.
(tui_fileopen, tui_sfileopen, tui_file_get_strbuf)
(tui_file_adjust_strbuf): Delete declarations.
(class tui_file): New class.
* tui/tui-io.c (tui_initialize_io): Use tui_file.
* tui/tui-regs.c (tui_restore_gdbout): Use delete.
(tui_register_format): Use string_stream.
* tui/tui-stack.c (tui_make_status_line): Use string_file.
(tui_get_function_from_frame): Use string_file.
* typeprint.c (type_to_string): Use string_file.
* ui-file.c (struct ui_file, ui_file_magic, ui_file_new): Delete.
(null_stream): New global.
(ui_file_delete): Delete.
(ui_file::ui_file): New.
(null_file_isatty): Delete.
(ui_file::~ui_file): New.
(null_file_rewind): Delete.
(ui_file::printf): New.
(null_file_put): Delete.
(null_file_flush): Delete.
(ui_file::putstr): New.
(null_file_write): Delete.
(ui_file::putstrn): New.
(null_file_read): Delete.
(ui_file::putc): New.
(null_file_fputs): Delete.
(null_file_write_async_safe): Delete.
(ui_file::vprintf): New.
(null_file_delete): Delete.
(null_file::write): New.
(null_file_fseek): Delete.
(null_file::puts): New.
(ui_file_data): Delete.
(null_file::write_async_safe): New.
(gdb_flush, ui_file_isatty): Adjust.
(ui_file_put, ui_file_rewind): Delete.
(ui_file_write): Adjust.
(ui_file_write_for_put): Delete.
(ui_file_write_async_safe, ui_file_read): Adjust.
(ui_file_fseek): Delete.
(fputs_unfiltered): Adjust.
(set_ui_file_flush, set_ui_file_isatty, set_ui_file_rewind)
(set_ui_file_put, set_ui_file_write, set_ui_file_write_async_safe)
(set_ui_file_read, set_ui_file_fputs, set_ui_file_fseek)
(set_ui_file_data): Delete.
(string_file::~string_file, string_file::write)
(struct accumulated_ui_file, do_ui_file_xstrdup, ui_file_xstrdup)
(do_ui_file_as_string, ui_file_as_string): Delete.
(do_ui_file_obsavestring, ui_file_obsavestring): Delete.
(struct mem_file): Delete.
(mem_file_new): Delete.
(stdio_file::stdio_file): New.
(mem_file_delete): Delete.
(stdio_file::stdio_file): New.
(mem_fileopen): Delete.
(stdio_file::~stdio_file): New.
(mem_file_rewind): Delete.
(stdio_file::set_stream): New.
(mem_file_put): Delete.
(stdio_file::open): New.
(mem_file_write): Delete.
(stdio_file_magic, struct stdio_file): Delete.
(stdio_file_new, stdio_file_delete, stdio_file_flush): Delete.
(stdio_file::flush): New.
(stdio_file_read): Rename to ...
(stdio_file::read): ... this. Adjust.
(stdio_file_write): Rename to ...
(stdio_file::write): ... this. Adjust.
(stdio_file_write_async_safe): Rename to ...
(stdio_file::write_async_safe) ... this. Adjust.
(stdio_file_fputs): Rename to ...
(stdio_file::puts) ... this. Adjust.
(stdio_file_isatty): Delete.
(stdio_file_fseek): Delete.
(stdio_file::isatty): New.
(stderr_file_write): Rename to ...
(stderr_file::write) ... this. Adjust.
(stderr_file_fputs): Rename to ...
(stderr_file::puts) ... this. Adjust.
(stderr_fileopen, stdio_fileopen, gdb_fopen): Delete.
(stderr_file::stderr_file): New.
(tee_file_magic): Delete.
(struct tee_file): Delete.
(tee_file::tee_file): New.
(tee_file_new): Delete.
(tee_file::~tee_file): New.
(tee_file_delete): Delete.
(tee_file_flush): Rename to ...
(tee_file::flush): ... this. Adjust.
(tee_file_write): Rename to ...
(tee_file::write): ... this. Adjust.
(tee_file::write_async_safe): New.
(tee_file_fputs): Rename to ...
(tee_file::puts): ... this. Adjust.
(tee_file_isatty): Rename to ...
(tee_file::isatty): ... this. Adjust.
* ui-file.h (struct obstack, struct ui_file): Don't
forward-declare.
(ui_file_new, ui_file_flush_ftype, set_ui_file_flush)
(ui_file_write_ftype)
(set_ui_file_write, ui_file_fputs_ftype, set_ui_file_fputs)
(ui_file_write_async_safe_ftype, set_ui_file_write_async_safe)
(ui_file_read_ftype, set_ui_file_read, ui_file_isatty_ftype)
(set_ui_file_isatty, ui_file_rewind_ftype, set_ui_file_rewind)
(ui_file_put_method_ftype, ui_file_put_ftype, set_ui_file_put)
(ui_file_delete_ftype, set_ui_file_data, ui_file_fseek_ftype)
(set_ui_file_fseek): Delete.
(ui_file_data, ui_file_delete, ui_file_rewind)
(struct ui_file): New.
(ui_file_up): New.
(class null_file): New.
(null_stream): Declare.
(ui_file_write_for_put, ui_file_put): Delete.
(ui_file_xstrdup, ui_file_as_string, ui_file_obsavestring):
Delete.
(ui_file_fseek, mem_fileopen, stdio_fileopen, stderr_fileopen)
(gdb_fopen, tee_file_new): Delete.
(struct string_file): New.
(struct stdio_file): New.
(stdio_file_up): New.
(struct stderr_file): New.
(class tee_file): New.
* ui-out.c (ui_out::field_stream): Take a 'string_file &' instead
of a 'ui_file *'. Adjust.
* ui-out.h (class ui_out) <field_stream>: Likewise.
* utils.c (do_ui_file_delete, make_cleanup_ui_file_delete)
(null_stream): Delete.
(error_stream): Take a 'string_file &' instead of a 'ui_file *'.
Adjust.
* utils.h (struct ui_file): Delete forward declaration..
(make_cleanup_ui_file_delete, null_stream): Delete declarations.
(error_stream): Take a 'string_file &' instead of a
'ui_file *'.
* varobj.c (varobj_value_get_print_value): Use string_file.
* xtensa-tdep.c (xtensa_verify_config): Use string_file.
* gdbarch.c: Regenerate.
All implementations of redirect/do_redirect in the ui_out subsystem
always return 0 (success). We can therefore clean it up and make them
return void.
gdb/ChangeLog:
* cli-out.c (cli_ui_out::do_redirect): Change return type to
void.
* cli-out.h (cli_ui_out::do_redirect): Likewise.
* mi/mi-out.c (mi_ui_out::do_redirect): Likewise.
* mi/mi-out.h (mi_ui_out::do_redirect): Likewise.
* ui-out.c (ui_out::redirect): Likewise.
* ui-out.h (ui_out::redirect, ui_out::do_redirect): Likewise.
* cli/cli-logging.c (set_logging_redirect): Update call site of
ui_out::redirect.
(handle_redirections): Likewise.
* scm-ports.c (ioscm_with_output_to_port_worker): Likewise.
* top.c (execute_command_to_string): Likewise.
* utils.c (do_ui_out_redirect_pop): Likewise.
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
This replaces all the uses of make_cleanup_restore_ui_file with
scoped_restore.
2016-10-21 Tom Tromey <tom@tromey.com>
* utils.c (make_cleanup_restore_ui_file, do_restore_ui_file)
(struct restore_ui_file_closure): Remove.
* utils.h (make_cleanup_restore_ui_file): Don't declare.
* guile/scm-ports.c (ioscm_with_output_to_port_worker): Use
scoped_restore.
* top.c (execute_command_to_string): Use scoped_restore.
Make each UI have its own interpreter list, top level interpreter,
current interpreter, etc. The "interpreter_async" global is not
really specific to an struct interp (it crosses interpreter-exec ...),
so I moved it to "struct ui" directly, while the other globals were
left hidden in interps.c, opaque to the rest of GDB.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* breakpoint.c (bpstat_do_actions_1): Access the current UI's
async field instead of the interpreter_async global.
* cli/cli-script.c (execute_user_command, while_command)
(if_command, script_from_file): Likewise.
* compile/compile.c: Include top.h instead of interps.h.
(compile_file_command, compile_code_command)
(compile_print_command): Access the current UI's async field
instead of the interpreter_async global.
* guile/guile.c: Include top.h instead of interps.h.
(guile_repl_command, guile_command, gdbscm_execute_gdb_command):
Access the current UI's async field instead of the
interpreter_async global.
* guile/scm-ports.c: Include top.h instead of interps.h.
(ioscm_with_output_to_port_worker): Access the current UI's async
field instead of the interpreter_async global.
* inf-loop.c (inferior_event_handler): Likewise.
* infcall.c (run_inferior_call): Likewise.
* infrun.c (reinstall_readline_callback_handler_cleanup)
(fetch_inferior_event): Likewise.
* interps.c (interpreter_async): Delete.
(struct ui_interp_info): New.
(get_current_interp_info): New function.
(interp_list, current_interpreter, top_level_interpreter_ptr):
Delete.
(interp_add, interp_set, interp_lookup, interp_ui_out)
(current_interp_set_logging, interp_set_temp)
(current_interp_named_p): Adjust to per-UI interpreters.
(command_interpreter): Delete.
(command_interp, current_interp_command_loop, interp_quiet_p)
(interp_exec, interpreter_exec_cmd, interpreter_completer)
(top_level_interpreter, top_level_interpreter_data): Adjust to
per-UI interpreters.
* interps.h (interpreter_async): Delete.
* main.c (captured_command_loop): Access the current UI's async
field instead of the interpreter_async global.
* python/python.c (python_interactive_command, python_command)
(execute_gdb_command): Likewise.
* top.c (maybe_wait_sync_command_done, execute_command_to_string):
Access the current UI's async field instead of the
interpreter_async global.
* top.h (struct tl_interp_info): Forward declare.
(struct ui) <interp_info, async>: New fields.
We have places where we call a blocking gdb_select expecting that a
Ctrl-C will unblock it. However, if the Ctrl-C is pressed just before
gdb_select, the SIGINT handler runs before gdb_select, and thus
gdb_select won't return.
For example gdb_readline_no_editing:
QUIT;
/* Wait until at least one byte of data is available. Control-C
can interrupt gdb_select, but not fgetc. */
FD_ZERO (&readfds);
FD_SET (fd, &readfds);
if (gdb_select (fd + 1, &readfds, NULL, NULL, NULL) == -1)
and stdio_file_read:
/* For the benefit of Windows, call gdb_select before reading from
the file. Wait until at least one byte of data is available.
Control-C can interrupt gdb_select, but not read. */
{
fd_set readfds;
FD_ZERO (&readfds);
FD_SET (stdio->fd, &readfds);
if (gdb_select (stdio->fd + 1, &readfds, NULL, NULL, NULL) == -1)
return -1;
}
return read (stdio->fd, buf, length_buf);
This is a race classically fixed with either the self-pipe trick, or
by blocking SIGINT and then using pselect instead of select.
Blocking SIGINT most of the time would mean that check_quit_flag (and
thus QUIT) would need to do a syscall every time it is called, which
sounds best avoided, since QUIT is called in many loops. Thus we take
the self-pipe trick route (wrapped in a serial event).
Instead of having all places that need this manually add an extra file
descriptor to the set of gdb_select's watched file descriptors, we
introduce a wrapper, interruptible_select, that does that.
The Windows version of gdb_select actually does not suffer from this,
because mingw-hdep.c:gdb_call_async_signal_handler sets a Windows
event that gdb_select always waits on. So this patch can be seen as
generalization of that technique. We can't remove that extra event
from mingw-hdep.c until we get rid of immediate_quit though.
gdb/ChangeLog:
2016-04-12 Pedro Alves <palves@redhat.com>
* defs.h: Extend QUIT-related comments to mention
interruptible_select.
(quit_serial_event_set, quit_serial_event_clear): Declare.
* event-top.c: Include "ser-event.h" and "gdb_select.h".
(quit_serial_event): New global.
(async_init_signals): Make quit_serial_event.
(quit_serial_event_set, quit_serial_event_clear)
(quit_serial_event_fd, interruptible_select): New functions.
* extension.c (set_quit_flag): Set the quit serial event.
(check_quit_flag): Clear the quit serial event.
* gdb_select.h (interruptible_select): New declaration.
* guile/scm-ports.c (ioscm_input_waiting): Use
interruptible_select instead of gdb_select.
* top.c (gdb_readline_no_editing): Likewise.
* ui-file.c (stdio_file_read): Likewise.
There is a handful of calls to
scm_dynwind_begin (0);
where the parameter is an enum, scm_t_dynwind_flags. In C++, we have no
choice but to add an explicit cast, since there is no enum value that
represents 0 (no flags set).
gdb/ChangeLog:
* guile/scm-breakpoint.c (gdbscm_set_breakpoint_stop_x): Add
scm_t_dynwind_flags casts.
* guile/scm-cmd.c (gdbscm_parse_command_name): Likewise.
* guile/scm-ports.c (gdbscm_open_memory): Likewise.
* guile/scm-value.c (gdbscm_value_to_string): Likewise.
As pointed out by Pedro, it's clearer to do it this way. We can trust
that scm_mode_bits won't try to modify our string, even though it takes
a non-const char *.
gdb/ChangeLog:
* guile/scm-ports.c (ioscm_make_gdb_stdio_port): Do not pass a
local char array to scm_mode_bits, use a cast instead.
ioscm_make_gdb_stdio_port passes const char pointers (literal strings) to
scm_mode_bits, which takes a non-const char pointer. Ideally, we would
change scm_mode_bits to take a const char pointer, but it's not part of
an API we control.
Instead, it's easy enough to build the string to pass to scm_mode_bits in
a (non-const) char array and pass that.
gdb/ChangeLog:
* guile/scm-ports.c (ioscm_make_gdb_stdio_port): Pass non-const
char pointer to scm_mode_bits.
By having a local variable of type (const gdb_byte *), we can avoid adding
two casts.
gdb/ChangeLog:
* guile/scm-ports.c (gdbscm_memory_port_write): Declare new
"data" local variable and use it.
Building GDB in C++ mode on Fedora 20, the gdb/guile/ code shows ~280
errors like:
src/gdb/guile/guile.c:515:1: error: invalid conversion from ‘scm_unused_struct* (*)(SCM, SCM) {aka scm_unused_struct* (*)(scm_unused_struct*, scm_unused_struct*)}’ to ‘scm_t_subr {aka void*}’ [-fpermissive]
This commit fixes them all.
gdb/ChangeLog:
2015-09-07 Pedro Alves <palves@redhat.com>
* guile/guile-internal.h (as_a_scm_t_subr): New.
* guile/guile.c (misc_guile_functions): Use it.
* guile/scm-arch.c (arch_functions): Use it.
* guile/scm-block.c (block_functions, gdbscm_initialize_blocks):
Use it.
* guile/scm-breakpoint.c (breakpoint_functions): Use it.
* guile/scm-cmd.c (command_functions): Use it.
* guile/scm-disasm.c (disasm_functions): Use it.
* guile/scm-exception.c (exception_functions)
(private_exception_functions): Use it.
* guile/scm-frame.c (frame_functions)
* guile/scm-gsmob.c (gsmob_functions): Use it.
* guile/scm-iterator.c (iterator_functions): Use it.
* guile/scm-lazy-string.c (lazy_string_functions): Use it.
* guile/scm-math.c (math_functions): Use it.
* guile/scm-objfile.c (objfile_functions): Use it.
* guile/scm-param.c (parameter_functions): Use it.
* guile/scm-ports.c (port_functions, private_port_functions): Use
it.
* guile/scm-pretty-print.c (pretty_printer_functions): Use it.
* guile/scm-progspace.c (pspace_functions): Use it.
* guile/scm-string.c (string_functions): Use it.
* guile/scm-symbol.c (symbol_functions): Use it.
* guile/scm-symtab.c (symtab_functions): Use it.
* guile/scm-type.c (type_functions, gdbscm_initialize_types): Use
it.
* guile/scm-value.c (value_functions): Use it.
This patch splits the TRY_CATCH macro into three, so that we go from
this:
~~~
volatile gdb_exception ex;
TRY_CATCH (ex, RETURN_MASK_ERROR)
{
}
if (ex.reason < 0)
{
}
~~~
to this:
~~~
TRY
{
}
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
~~~
Thus, we'll be getting rid of the local volatile exception object, and
declaring the caught exception in the catch block.
This allows reimplementing TRY/CATCH in terms of C++ exceptions when
building in C++ mode, while still allowing to build GDB in C mode
(using setjmp/longjmp), as a transition step.
TBC, after this patch, is it _not_ valid to have code between the TRY
and the CATCH blocks, like:
TRY
{
}
// some code here.
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
Just like it isn't valid to do that with C++'s native try/catch.
By switching to creating the exception object inside the CATCH block
scope, we can get rid of all the explicitly allocated volatile
exception objects all over the tree, and map the CATCH block more
directly to C++'s catch blocks.
The majority of the TRY_CATCH -> TRY+CATCH+END_CATCH conversion was
done with a script, rerun from scratch at every rebase, no manual
editing involved. After the mechanical conversion, a few places
needed manual intervention, to fix preexisting cases where we were
using the exception object outside of the TRY_CATCH block, and cases
where we were using "else" after a 'if (ex.reason) < 0)' [a CATCH
after this patch]. The result was folded into this patch so that GDB
still builds at each incremental step.
END_CATCH is necessary for two reasons:
First, because we name the exception object in the CATCH block, which
requires creating a scope, which in turn must be closed somewhere.
Declaring the exception variable in the initializer field of a for
block, like:
#define CATCH(EXCEPTION, mask) \
for (struct gdb_exception EXCEPTION; \
exceptions_state_mc_catch (&EXCEPTION, MASK); \
EXCEPTION = exception_none)
would avoid needing END_CATCH, but alas, in C mode, we build with C90,
which doesn't allow mixed declarations and code.
Second, because when TRY/CATCH are wired to real C++ try/catch, as
long as we need to handle cleanup chains, even if there's no CATCH
block that wants to catch the exception, we need for stop at every
frame in the unwind chain and run cleanups, then rethrow. That will
be done in END_CATCH.
After we require C++, we'll still need TRY/CATCH/END_CATCH until
cleanups are completely phased out -- TRY/CATCH in C++ mode will
save/restore the current cleanup chain, like in C mode, and END_CATCH
catches otherwise uncaugh exceptions, runs cleanups and rethrows, so
that C++ cleanups and exceptions can coexist.
IMO, this still makes the TRY/CATCH code look a bit more like a
newcomer would expect, so IMO worth it even if we weren't considering
C++.
gdb/ChangeLog.
2015-03-07 Pedro Alves <palves@redhat.com>
* common/common-exceptions.c (struct catcher) <exception>: No
longer a pointer to volatile exception. Now an exception value.
<mask>: Delete field.
(exceptions_state_mc_init): Remove all parameters. Adjust.
(exceptions_state_mc): No longer pop the catcher here.
(exceptions_state_mc_catch): New function.
(throw_exception): Adjust.
* common/common-exceptions.h (exceptions_state_mc_init): Remove
all parameters.
(exceptions_state_mc_catch): Declare.
(TRY_CATCH): Rename to ...
(TRY): ... this. Remove EXCEPTION and MASK parameters.
(CATCH, END_CATCH): New.
All callers adjusted.
gdb/gdbserver/ChangeLog:
2015-03-07 Pedro Alves <palves@redhat.com>
Adjust all callers of TRY_CATCH to use TRY/CATCH/END_CATCH
instead.
Tom Tromey
Pedro Alves
Simon Marchi
Joel Brobecker
Simon Marchi
Doug Evans