The all-architectures-1.exp test case currently yields 66 FAILs on s390x,
because the "set architecture" command fails each time when attempting to
switch to "cris", "crisv32", or "cris:common_v10_v32". Actually, the
command would succeed if the endianness had been set to "little" before.
Instead, the test case sets the endianness to "auto", which results in
"big" on s390x.
So on x86_64:
(gdb) set endian auto
The target endianness is set automatically (currently little endian)
(gdb) set architecture cris
warning: A handler for the OS ABI "AIX" is not built into this configuration
of GDB. Attempting to continue with the default cris settings.
The target architecture is assumed to be cris
But on s390x:
(gdb) set endian auto
The target endianness is set automatically (currently big endian)
(gdb) set architecture cris
Architecture `cris' not recognized.
See also the test results for s390x and ppc64be:
https://sourceware.org/ml/gdb-testers/2016-q4/msg05150.htmlhttps://sourceware.org/ml/gdb-testers/2016-q4/msg05713.html
Indeed, cris_gdbarch_init in cris-tdep.c returns a failure unless the
user-specified endianness is "little". Other architectures usually ignore
the user-specified endianness and return a valid gdbarch anyhow, even if
they can not really cope with the given endianness.
This patch removes the check in cris-tdep.c and forces little-endian byte
order instead.
gdb/ChangeLog:
* cris-tdep.c (cris_gdbarch_init): Remove check for
info.byte_order and force it to BFD_ENDIAN_LITTLE.
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
cris_delayed_get_disassembler has an assert that exec_bfd can't be
NULL, but this assert can be triggered like this,
(gdb) set architecture cris
The target architecture is assumed to be cris
(gdb) disassemble 0x0,+4
Dump of assembler code from 0x0 to 0x4:
0x00000000:
../../binutils-gdb/gdb/cris-tdep.c:3798: internal-error: int cris_delayed_get_disassembler(bfd_vma, disassemble_info*): Assertion `exec_bfd != NULL' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
however, cris_get_disassembler does have code to handle the case that
bfd is NULL,
/* If there's no bfd in sight, we return what is valid as input in all
contexts if fed back to the assembler: disassembly *with* register
prefix. Unfortunately this will be totally wrong for v32. */
if (abfd == NULL)
return print_insn_cris_with_register_prefix;
This patch is to remove this assert.
gdb:
2016-12-12 Yao Qi <yao.qi@linaro.org>
PR tdep/20955
* cris-tdep.c (cris_delayed_get_disassembler): Remove the
assert.
Both of them are used in conversion. We can remove them since the
conversion is done.
There are many architectures only have one breakpoint instruction,
so their gdbarch methods breakpoint_kind_from_pc and
sw_breakpoint_from_kind look very similar. Instead of macro, we
use template "template <size_t, const gdb_byte *> struct bp_manipulation"
for these architectures. In order to use template, I also change
breakpoint instruction of type "static const gdb_byte[]" to
"constexpr gdb_byte[]", and rename them to ARCH_break_insn.
gdb:
2016-11-03 Yao Qi <yao.qi@linaro.org>
Pedro Alves <palves@redhat.com>
* aarch64-tdep.c (aarch64_default_breakpoint): Change it to
constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(aarch64_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* alpha-tdep.c (break_insn): Rename to alpha_break_insn.
Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(alpha_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* arc-tdep.c (arc_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* arch-utils.h (GDBARCH_BREAKPOINT_MANIPULATION): Remove.
(struct bp_manipulation): New.
(SET_GDBARCH_BREAKPOINT_MANIPULATION): Remove.
(struct bp_manipulation_endian): New.
(BP_MANIPULATION): New.
(BP_MANIPULATION_ENDIAN): New.
* arm-tdep.c (arm_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* avr-tdep.c (avr_break_insn): Change it constexpr.
(avr_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* bfin-tdep.c (bfin_gdbarch_init): Likewise.
* cris-tdep.c (cris_gdbarch_init): Likewise.
* frv-tdep.c (breakpoint): Rename it to frv_break_insn, and
change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(frv_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* ft32-tdep.c (breakpoint): Rename it to ft32_break_insn and
change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(ft32_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* h8300-tdep.c (breakpoint): Rename it to h8300_break_insn.
Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(h8300_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* hppa-tdep.c (breakpoint): Rename it to h8300_break_insn.
Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(hppa_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* i386-tdep.c (break_insn): Rename it to i386_break_insn.
Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(i386_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* iq2000-tdep.c (iq2000_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* lm32-tdep.c (breakpoint): Rename it to lm32_break_insn and
change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(lm32_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* m32c-tdep.c (break_insn): Rename it to m32c_break_insn and change
its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(m32c_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* m32r-tdep.c (m32r_gdbarch_init): Likewise.
* m68hc11-tdep.c (breakpoint): Rename it to m68hc11_break_insn and
change its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(m68hc11_gdbarch_init): Don't use SET_GDBARCH_BREAKPOINT_MANIPULATION.
* m68k-tdep.c (break_insn): Rename it to m68k_break_insn and change
its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(m68k_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* m88k-tdep.c (break_insn): Rename it to m88k_break_insn and change
its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(m88k_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* mep-tdep.c (breakpoint): Rename it to mep_break_insn and change
its type to constexpr. Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(mep_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* microblaze-tdep.c (break_insn): Rename it to
microblaze_break_insn and change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(microblaze_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* mips-tdep.c (mips_gdbarch_init): Likewise.
* mn10300-tdep.c (breakpoint): Rename it to mn10300_break_insn and
change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(mn10300_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* moxie-tdep.c (breakpoint): Rename it to moxie_break_insn and
change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(moxie_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* msp430-tdep.c (breakpoint): Rename it to msp430_break_insn
and change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(msp430_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* mt-tdep.c (mt_gdbarch_init): Likewise.
* nds32-tdep.c (break_insn): Rename it to nds32_break_insn
and change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(nds32_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* nios2-tdep.c (nios2_gdbarch_init): Likewise.
* rl78-tdep.c (breakpoint): Rename it to rl78_break_ins
and change its type to rl78_break_insn. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(rl78_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* rs6000-tdep.c (big_breakpoint): Change its type to
constexpr.
(little_breakpoint): Likewise.
Don't use GDBARCH_BREAKPOINT_MANIPULATION_ENDIAN.
(rs6000_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* rx-tdep.c (breakpoint): Rename it to rx_break_insn and
change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(rx_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* s390-linux-tdep.c (breakpoint): Rename it to s390_break_insn
and change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION
(s390_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* score-tdep.c (score_gdbarch_init): Likewise.
* sh-tdep.c (sh_gdbarch_init): Likewise.
* sh64-tdep.c (sh64_gdbarch_init): Likewise.
* sparc-tdep.c (break_insn): Rename it to sparc_break_insn
and change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(sparc32_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* spu-tdep.c (breakpoint): Rename it to spu_break_insn and change
its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(spu_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* tic6x-tdep.c (tic6x_gdbarch_init): Likewise.
* tilegx-tdep.c (breakpoint): Rename it to tilegx_break_insn
and change its type to constexpr. Don't use
GDBARCH_BREAKPOINT_MANIPULATION.
(tilegx_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* v850-tdep.c (v850_gdbarch_init): Likewise.
* vax-tdep.c (break_insn): Rename it to vax_break_insn and
change its type to constexpr.
Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(vax_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* xstormy16-tdep.c (breakpoint): Rename it to
xstormy16_break_insn and change its type to constexpr.
Don't use GDBARCH_BREAKPOINT_MANIPULATION.
(xstormy16_gdbarch_init): Don't use
SET_GDBARCH_BREAKPOINT_MANIPULATION.
* xtensa-tdep.c (xtensa_gdbarch_init): Likewise.
This patch adds two gdbarch methods breakpoint_kind_from_pc and
sw_breakpoint_from_kind, and uses target_info.placed_size as "kind"
of the breakpoint. This patch updates the usages of
target_info.placed_size.
The "kind" of a breakpoint is determined by gdbarch rather than
target, so we have gdbarch method breakpoint_kind_from_pc, and we
should set target_info.placed_size out of each implementation of
target to_insert_breakpoint. In this way, each target doesn't have
to set target_info.placed_size any more.
This patch also sets target_info.placed_address before
target_insert_breakpoint too, so that target to_insert_breakpoint
can use it, see record_full_insert_breakpoint.
Before we call target_insert_breakpoint, we set
target_info.placed_address and target_info.placed_size like this,
CORE_ADDR addr = bl->target_info.reqstd_address;
bl->target_info.placed_size = gdbarch_breakpoint_kind_from_pc (bl->gdbarch, &addr);
bl->target_info.placed_address = addr;
return target_insert_breakpoint (bl->gdbarch, &bl->target_info);
target_insert_breakpoint may fail, but it doesn't matter to the "kind"
and "placed_address" of a breakpoint. They should be determined by
gdbarch.
gdb:
2016-11-03 Yao Qi <yao.qi@linaro.org>
* arch-utils.h (GDBARCH_BREAKPOINT_MANIPULATION): Define
breakpoint_kind_from_pc and sw_breakpoint_from_kind.
(GDBARCH_BREAKPOINT_MANIPULATION_ENDIAN): Likewise.
(SET_GDBARCH_BREAKPOINT_MANIPULATION): Call
set_gdbarch_breakpoint_kind_from_pc and
set_gdbarch_sw_breakpoint_from_kind.
* arm-tdep.c: Add comments.
* bfin-tdep.c: Likewise.
* breakpoint.c (breakpoint_kind): New function.
(insert_bp_location): Set target_info.placed_size and
target_info.placed_address.
(bkpt_insert_location): Likewise.
* cris-tdep.c: Add comments.
* gdbarch.sh (breakpoint_kind_from_pc): New.
(sw_breakpoint_from_kind): New.
* gdbarch.c, gdbarch.h: Regenerated.
* ia64-tdep.c (ia64_memory_insert_breakpoint): Don't set
bp_tgt->placed_size.
(ia64_memory_remove_breakpoint): Don't assert
bp_tgt->placed_size.
(ia64_breakpoint_kind_from_pc): New function.
(ia64_gdbarch_init): Install ia64_breakpoint_kind_from_pc.
* m32r-tdep.c (m32r_memory_insert_breakpoint): Don't set
bp_tgt->placed_size.
* mem-break.c (default_memory_insert_breakpoint): Don't set
bp_tgt->placed_size. Call gdbarch_sw_breakpoint_from_kind.
(default_memory_remove_breakpoint): Call
gdbarch_sw_breakpoint_from_kind.
(memory_validate_breakpoint): Don't check bp_tgt->placed_size.
* mips-tdep.c: Add comments.
* mt-tdep.c: Likewise.
* nios2-tdep.c: Likewise.
* record-full.c (record_full_insert_breakpoint): Don't call
gdbarch_breakpoint_from_pc. Don't set bp_tgt->placed_address
and bp_tgt->placed_size.
* remote.c (remote_insert_breakpoint): Don't call
gdbarch_remote_breakpoint_from_pc. Use bp_tgt->placed_size.
Don't set bp_tgt->placed_address and bp_tgt->placed_size.
(remote_insert_hw_breakpoint): Likewise.
* score-tdep.c: Likewise.
* sh-tdep.c: Likewise.
* tic6x-tdep.c: Likewise.
* v850-tdep.c: Likewise.
* xtensa-tdep.c: Likewise.
This fixes:
$ ./gdb -q -ex "set endian big" -ex "set architecture cris"
The target is assumed to be big endian
.../src/gdb/cris-tdep.c:4051: internal-error: cris_gdbarch_init: big endian byte order in info
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
The "set cris-version" command can likewise cause internal errors.
The gdbarch init routine should be returning 0 to reject the
architecture instead of internal erroring on user input.
gdb/ChangeLog:
2016-03-09 Pedro Alves <palves@redhat.com>
* cris-tdep.c (cris_gdbarch_init): Return 0 if the info's byte
order is BFD_ENDIAN_BIG or if the cris version is unsupported.
There are a bunch of places where a void* is implicitely casted into a
gdb_byte*. The auto-insert-casts script added explicit casts at those
places. However, in many cases, it makes more sense to just change the
void* to a gdb_byte*.
gdb/ChangeLog:
* aarch64-tdep.c (stack_item_t): Change type of data to gdb_byte*.
* arm-tdep.c (struct stack_item): Likewise.
(push_stack_item): Add gdb_byte* cast.
* avr-tdep.c (struct stack_item): Change type of data to gdb_byte*.
(push_stack_item): Add gdb_byte* cast.
* cli/cli-dump.c (dump_memory_to_file): Change type of buf to gdb_byte*
and add cast.
* cris-tdep.c (struct stack_item): Change type of data to gdb_byte*.
(push_stack_item): Add gdb_byte* cast.
* gcore.c (gcore_copy_callback): Change type of memhunk to gdb_byte* and
add cast.
* gdbtypes.h (print_scalar_formatted): Change type of first parameter to
gdb_byte*.
* h8300-tdep.c (h8300_extract_return_value): Change type of valbuf to
gdb_byte* and remove unnecessary cast.
(h8300h_extract_return_value): Likewise.
(h8300_store_return_value): Change type of valbuf to gdb_byte*.
(h8300h_store_return_value): Likewise.
* iq2000-tdep.c (iq2000_extract_return_value): Change type of valbuf to
gdb_byte* and remove unnecessary cast.
* jit.c (jit_reader_try_read_symtab): Change type of gdb_mem to gdb_byte*
and add cast.
* m32r-tdep.c (m32r_store_return_value): Change type of valbuf to
gdb_byte* and remove unnecessary cast.
(m32r_extract_return_value): Change type of dst to gdb_byte* and remove
valbuf.
* mep-tdep.c (mep_pseudo_cr32_read): Change type of buf to gdb_byte*.
(mep_pseudo_cr64_read): Likewise.
(mep_pseudo_csr_write): Likewise.
(mep_pseudo_cr32_write): Likewise.
(mep_pseudo_cr64_write): Likewise.
* mi/mi-main.c (mi_cmd_data_write_memory): Change type of buffer to
gdb_byte* and add cast.
* moxie-tdep.c (moxie_store_return_value): Change type of valbuf to
gdb_byte* and remove unnecessary cast.
(moxie_extract_return_value): Change type of dst to gdb_byte* and remove
valbuf.
* p-valprint.c (print_scalar_formatted): Change type of valaddr to
gdb_byte*.
* printcmd.c (void): Likewise.
* python/py-inferior.c (infpy_read_memory): Change type of buffer to
gdb_byte* and add cast.
(infpy_write_memory): Likewise.
(infpy_search_memory): Likewise.
* regcache.c (regcache_raw_write_signed): Change type of buf to gdb_byte*
and add cast.
(regcache_raw_write_unsigned): Likewise.
(regcache_cooked_write_signed): Likewise.
(regcache_cooked_write_unsigned): Likewise.
* sh64-tdep.c (h64_extract_return_value): Change type of valbuf to
gdb_byte*.
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
This brings in some standard functionality hitherdo missing from
the CRIS/CRISv32 port thanks to the new call to gdbarch_init_osabi,
as well as clearly showing that there is Linux support for this
platform by virtue of the existence of a cris-linux-tdep.c file.
2013-09-06 Ricard Wanderlof <ricardw@axis.com>
* Makefile.in (ALL_TARGET_OBS): Add cris-linux-tdep.o.
* configure.tgt: Add cris-linux-tdep.o and linux-tdep.o to
gdb_target_obs for cris target.
* cris-tdep.c (struct gdbarch_tdep): Move to cris-tdep.h.
(cris_gdbarch_init): Move calls to
set_gdbarch_fetch_tls_load_module_address and
set_solib_svr4_fetch_link_map_offsets to cris-linux-tdep.c.
Add call to gdbarch_init_osabi.
* cris-linux-tdep.c: New file.
* cris-tdep.h: New file.
"set cris-version" is an unsigned command:
/* CRIS-specific user-commands. */
add_setshow_uinteger_cmd ("cris-version", class_support,
&usr_cmd_cris_version,
_("Set the current CRIS version."),
_("Show the current CRIS version."),
_("\
Set to 10 for CRISv10 or 32 for CRISv32 if autodetection fails.\n\
Defaults to 10. "),
Tested by building on x86_64 Fedora 17.
2013-04-19 Pedro Alves <palves@redhat.com>
* cris-tdep.c (usr_cmd_cris_version): Make unsigned.
(struct gdbarch_tdep) <cris_version>: Make unsigned.
(cris_spec_reg_applicable, cris_gdbarch_init): Adjust locals.
-Wpointer-sign catches all these cases across the codebase that should
be using gdb_byte for raw target bytes. I think these are all
obvious, hence I've collapsed into a single patch.
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* aarch64-tdep.c (aarch64_default_breakpoint): Change type to
gdb_byte[].
(aarch64_breakpoint_from_pc): Change return type to gdb_byte *.
* ada-lang.c (ada_value_assign): Use gdb_byte.
* alphanbsd-tdep.c (sigtramp_retcode): Change type to gdb_byte[].
(alphanbsd_sigtramp_offset): Use gdb_byte.
* arm-linux-tdep.c (arm_linux_arm_le_breakpoint)
(arm_linux_arm_be_breakpoint, eabi_linux_arm_le_breakpoint)
(eabi_linux_arm_be_breakpoint, arm_linux_thumb_be_breakpoint)
(arm_linux_thumb_le_breakpoint, arm_linux_thumb2_be_breakpoint)
(arm_linux_thumb2_le_breakpoint): Change type to gdb_byte[].
* arm-tdep.c (arm_stub_unwind_sniffer)
(arm_displaced_init_closure): Use gdb_byte.
(arm_default_arm_le_breakpoint, arm_default_arm_be_breakpoint)
(arm_default_thumb_le_breakpoint)
(arm_default_thumb_be_breakpoint): Change type to gdb_byte[].
* arm-tdep.h (struct gdbarch_tdep) <arm_breakpoint,
thumb_breakpoint, thumb2_breakpoint>: Change type to gdb_byte *.
* arm-wince-tdep.c (arm_wince_le_breakpoint)
(arm_wince_thumb_le_breakpoint): Change type to gdb_byte[].
* armnbsd-tdep.c (arm_nbsd_arm_le_breakpoint)
(arm_nbsd_arm_be_breakpoint, arm_nbsd_thumb_le_breakpoint)
(arm_nbsd_thumb_be_breakpoint): Change type to gdb_byte[].
* armobsd-tdep.c (arm_obsd_thumb_le_breakpoint)
(arm_obsd_thumb_be_breakpoint): Change type to gdb_byte[].
* cris-tdep.c (push_stack_item, cris_push_dummy_call)
(cris_store_return_value, cris_extract_return_value): Use
gdb_byte.
(constraint): Change type of parameter to char * from signed
char*. Use gdb_byte.
* dwarf2loc.c (read_pieced_value, write_pieced_value): Change type
of local buffer to gdb_byte *.
* dwarf2read.c (read_index_from_section): Use gdb_byte.
(create_dwp_hash_table): Change type of locals to gdb_byte *.
(add_address_entry): Change type of local buffer to gdb_byte[].
* frv-tdep.c (frv_adjust_breakpoint_address, find_func_descr)
(frv_push_dummy_call): Use gdb_byte.
* hppa-hpux-tdep.c (hppa_hpux_push_dummy_code)
(hppa_hpux_supply_ss_fpblock, hppa_hpux_supply_ss_wide)
(hppa_hpux_supply_save_state): Use gdb_byte.
* hppa-tdep.c (hppa32_push_dummy_call)
(hppa64_convert_code_addr_to_fptr): Use gdb_byte.
* ia64-tdep.c (extract_bit_field, replace_bit_field)
(slotN_contents, replace_slotN_contents): Change type of parameter
to gdb_byte *.
(fetch_instruction, ia64_pseudo_register_write)
(ia64_register_to_value, ia64_value_to_register)
(ia64_extract_return_value, ia64_store_return_value)
(ia64_push_dummy_call): Use gdb_byte.
* m32c-tdep.c (m32c_return_value): Remove cast.
* m68hc11-tdep.c (m68hc11_pseudo_register_write)
(m68hc11_push_dummy_call, m68hc11_store_return_value): Use
gdb_byte.
* mipsnbsd-tdep.c (mipsnbsd_get_longjmp_target): Use gdb_byte.
* mn10300-tdep.c (mn10300_store_return_value)
(mn10300_breakpoint_from_pc, mn10300_push_dummy_call): Use
gdb_byte.
* moxie-tdep.c (moxie_process_readu): Use gdb_byte.
(moxie_process_record): Remove casts.
* ppc-ravenscar-thread.c (supply_register_at_address)
(ppc_ravenscar_generic_store_registers): Use gdb_byte.
* ravenscar-thread.c (get_running_thread_id): Use gdb_byte.
* remote-m32r-sdi.c (m32r_fetch_register): Use gdb_byte.
* remote-mips.c (mips_xfer_memory): Use gdb_byte.
* remote.c (compare_sections_command): Use gdb_byte.
* score-tdep.c (score7_free_memblock): Change type of parameter to
gdb_byte *.
* sh-tdep.c (sh_justify_value_in_reg): Change return type to
gdb_byte *. Use gdb_byte.
(sh_push_dummy_call_fpu): Use gdb_byte.
(sh_extract_return_value_nofpu, sh_extract_return_value_fpu)
(sh_store_return_value_nofpu, sh_store_return_value_fpu)
(sh_register_convert_to_virtual, sh_register_convert_to_raw):
Change parameter type to 'gdb_byte *'. Use gdb_byte.
(sh_pseudo_register_read, sh_pseudo_register_write): Use gdb_byte.
* sh64-tdep.c (sh64_push_dummy_call): Use gdb_byte.
(sh64_store_return_value, sh64_register_convert_to_virtual):
Change parameter type to 'gdb_byte *'. Use gdb_byte.
(sh64_pseudo_register_write): Use gdb_byte.
* solib-darwin.c (darwin_current_sos): Add casts to 'gdb_byte *'.
* solib-irix.c (fetch_lm_info): Likewise. Use gdb_byte for byte
buffer.
(irix_current_sos): Use gdb_byte.
* solib-som.c (som_current_sos): Use gdb_byte.
* sparc-ravenscar-thread.c (supply_register_at_address)
(sparc_ravenscar_generic_store_registers): Use gdb_byte.
* spu-multiarch.c (spu_xfer_partial): Add cast to 'char *'.
* spu-tdep.c (spu_get_overlay_table): Use gdb_byte.
* tic6x-tdep.c (tic6x_breakpoint_from_pc): Change return type to
'gdb_byte *'.
* tic6x-tdep.h (struct gdbarch_tdep) <breakpoint>: Change type to
'gdb_byte *'.
* tracepoint.c (tfile_fetch_registers): Use gdb_byte.
* xstormy16-tdep.c (xstormy16_extract_return_value)
(xstormy16_store_return_value): Change parameter type to
'gdb_byte *'. Adjust.
(xstormy16_push_dummy_call): Use gdb_byte.
* xtensa-tdep.c (xtensa_scan_prologue, call0_ret)
(call0_analyze_prologue, execute_code): Use gdb_byte.
Being a uinteger means you revert back to having GDB decide the
version. It makes no sense to have an "unlimited" version.
(gdb) show cris-version
The current CRIS version is 0.
(gdb) set cris-version 0
(gdb) show cris-version
The current CRIS version is unlimited.
(gdb)
gdb/
2013-03-26 Pedro Alves <palves@redhat.com>
* cris-tdep.c (_initialize_cris_tdep): Make the "set cris-version"
command zuinteger instead of uinteger.
gdb_byte should be used for bytes from the program being debugged. We
have many places using char or unsigned char instead all over the
existing ports, and more ends up added over time due to copy/paste as
new code is based on old code.
I've greped the tree for "char buf[", and fixed all I found.
Tested by building with --enable-targets=all.
2013-03-01 Pedro Alves <palves@redhat.com>
Use gdb_byte for bytes from the program being debugged.
* arm-tdep.c (arm_store_return_value, arm_get_longjmp_target):
Change type of local 'buf' to gdb_byte.
* avr-tdep.c (avr_frame_prev_register, avr_push_dummy_call): Likewise.
* bfin-tdep.c (bfin_push_dummy_call): Likewise.
* cris-tdep.c (cris_sigcontext_addr)
(cris_sigtramp_frame_unwind_cache): Likewise.
* frv-linux-tdep.c (frv_linux_pc_in_sigtramp)
(frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache):
Likewise.
* frv-tdep.c (frv_pseudo_register_write, frv_analyze_prologue): Likewise.
* hppa-hpux-tdep.c (hppa32_hpux_find_global_pointer)
(hppa32_hpux_search_dummy_call_sequence)
(hppa_hpux_supply_save_state): Likewise.
* hppa-linux-tdep.c (insns_match_pattern)
(hppa_linux_find_global_pointer): Likewise.
* hppa-tdep.c (hppa_in_function_epilogue_p)
(skip_prologue_hard_way, hppa_frame_cache): Likewise.
* i386-nto-tdep.c (i386nto_sigcontext_addr): Likewise.
* i386fbsd-tdep.c (i386fbsd_supply_uthread)
(i386fbsd_collect_uthread): Likewise.
* ia64-hpux-tdep.c (ia64_hpux_push_dummy_code): Likewise.
* ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Likewise.
* ia64-tdep.c (examine_prologue, ia64_frame_cache)
(ia64_frame_prev_register, ia64_sigtramp_frame_cache)
(ia64_sigtramp_frame_prev_register, ia64_access_reg)
(ia64_access_rse_reg, ia64_libunwind_frame_this_id)
(ia64_libunwind_frame_prev_register)
(ia64_libunwind_sigtramp_frame_this_id)
(ia64_find_global_pointer_from_dynamic_section)
(find_extant_func_descr, find_func_descr, ia64_dummy_id)
(ia64_unwind_pc): Likewise.
* iq2000-tdep.c (iq2000_store_return_value): Likewise.
* m68hc11-tdep.c (m68hc11_push_dummy_call)
(m68hc11_extract_return_value): Likewise.
* m68klinux-nat.c (fetch_register, store_register): Likewise.
* mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_cr32_write)
(mep_get_insn, mep_push_dummy_call): Likewise.
* mips-linux-tdep.c (mips_linux_get_longjmp_target)
(mips_linux_in_dynsym_stub): Likewise.
* mn10300-tdep.c (mep_pseudo_cr32_write): Likewise.
* ppc-linux-nat.c (fetch_register, store_register): Likewise.
* regcache.c (dump_endian_bytes): Change type of parameter 'buf'
to gdb_byte.
* remote-mips.c (mips_set_register): Likewise.
* remote-sim.c (gdbsim_fetch_register): Likewise.
* score-tdep.c (score7_fetch_inst): Change type of parameter
'memblock' and local 'buf' to gdb_byte.
(score7_malloc_and_get_memblock): Change return type to gdb_byte.
Change type of local 'buf' to gdb_byte. Adjust.
(score7_adjust_memblock_ptr): Change type of parameter 'memblock'
to gdb_byte**.
(score7_analyze_prologue): Change type of 'memblock' and
'memblock_ptr' locals to gdb_byte*.
* sh64-tdep.c (sh64_extract_return_value)
(sh64_store_return_value): Change type of local 'buf' to gdb_byte.
* solib-darwin.c (darwin_current_sos, darwin_read_exec_load_addr):
* solib-pa64.c (pa64_solib_create_inferior_hook)
(pa64_open_symbol_file_object): Remove local 'buf'.
* solib-som.c (som_solib_create_inferior_hook, link_map_start)
(som_open_symbol_file_object): Likewise.
* solib-spu.c (spu_current_sos): Likewise.
* spu-linux-nat.c (spu_fetch_inferior_registers): Likewise.
* spu-multiarch.c (parse_spufs_run, spu_fetch_registers)
(spu_store_registers): Likewise.
* target.c (debug_print_register): Likewise.
* tic6x-tdep.c (tic6x_get_longjmp_target): Likewise.
* xstormy16-tdep.c (xstormy16_store_return_value)
(xstormy16_push_dummy_call, xstormy16_resolve_jmp_table_entry)
(xstormy16_find_jmp_table_entry): Likewise.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
* breakpoint.h (bp_location): Add related_address member.
* inferior.h (get_return_value): Take a pointer to struct value
instead of struct type for the function requested.
* value.h (using_struct_return): Likewise.
* gdbarch.sh (return_value): Take a pointer to struct value
instead of struct type for the function requested.
* breakpoint.c (set_breakpoint_location_function): Initialize
related_address for bp_gnu_ifunc_resolver breakpoints.
* elfread.c (elf_gnu_ifunc_resolver_return_stop): Pass the
requested function's address to gdbarch_return_value.
* eval.c (evaluate_subexp_standard): Pass the requested
function's address to using_struct_return.
* infcall.c (call_function_by_hand): Pass the requested
function's address to using_struct_return and
gdbarch_return_value.
* infcmd.c (get_return_value): Take a pointer to struct value
instead of struct type for the function requested.
(print_return_value): Update accordingly.
(finish_command_continuation): Likewise.
* stack.c (return_command): Pass the requested function's
address to using_struct_return and gdbarch_return_value.
* value.c (using_struct_return): Take a pointer to struct value
instead of struct type for the function requested. Pass the
requested function's address to gdbarch_return_value.
* python/py-finishbreakpoint.c (finish_breakpoint_object):
New function_value member, replacing function_type.
(bpfinishpy_dealloc): Update accordingly.
(bpfinishpy_pre_stop_hook): Likewise.
(bpfinishpy_init): Likewise. Record the requested function's
address.
* mips-tdep.c (mips_fval_reg): New enum.
(mips_o32_push_dummy_call): For MIPS16 FP doubles do not swap
words put in GP registers.
(mips_o64_push_dummy_call): Update a comment.
(mips_o32_return_value): Take a pointer to struct value instead
of struct type for the function requested and use it to check if
using the MIPS16 calling convention. Return the designated
general purpose registers for floating-point values returned in
MIPS16 mode.
(mips_o64_return_value): Likewise.
* ppc-tdep.h (ppc_sysv_abi_return_value): Update prototype.
(ppc_sysv_abi_broken_return_value): Likewise.
(ppc64_sysv_abi_return_value): Likewise.
* alpha-tdep.c (alpha_return_value): Take a pointer to struct
value instead of struct type for the function requested.
* amd64-tdep.c (amd64_return_value): Likewise.
* amd64-windows-tdep.c (amd64_windows_return_value): Likewise.
* arm-tdep.c (arm_return_value): Likewise.
* avr-tdep.c (avr_return_value): Likewise.
* bfin-tdep.c (bfin_return_value): Likewise.
* cris-tdep.c (cris_return_value): Likewise.
* frv-tdep.c (frv_return_value): Likewise.
* h8300-tdep.c (h8300_return_value): Likewise.
(h8300h_return_value): Likewise.
* hppa-tdep.c (hppa32_return_value): Likewise.
(hppa64_return_value): Likewise.
* i386-tdep.c (i386_return_value): Likewise.
* ia64-tdep.c (ia64_return_value): Likewise.
* iq2000-tdep.c (iq2000_return_value): Likewise.
* lm32-tdep.c (lm32_return_value): Likewise.
* m32c-tdep.c (m32c_return_value): Likewise.
* m32r-tdep.c (m32r_return_value): Likewise.
* m68hc11-tdep.c (m68hc11_return_value): Likewise.
* m68k-tdep.c (m68k_return_value): Likewise.
(m68k_svr4_return_value): Likewise.
* m88k-tdep.c (m88k_return_value): Likewise.
* mep-tdep.c (mep_return_value): Likewise.
* microblaze-tdep.c (microblaze_return_value): Likewise.
* mn10300-tdep.c (mn10300_return_value): Likewise.
* moxie-tdep.c (moxie_return_value): Likewise.
* mt-tdep.c (mt_return_value): Likewise.
* ppc-linux-tdep.c (ppc_linux_return_value): Likewise.
* ppc-sysv-tdep.c (ppc_sysv_abi_return_value): Likewise.
(ppc_sysv_abi_broken_return_value): Likewise.
(ppc64_sysv_abi_return_value): Likewise.
* ppcnbsd-tdep.c (ppcnbsd_return_value): Likewise.
* rl78-tdep.c (rl78_return_value): Likewise.
* rs6000-aix-tdep.c (rs6000_return_value): Likewise.
* rx-tdep.c (rx_return_value): Likewise.
* s390-tdep.c (s390_return_value): Likewise.
* score-tdep.c (score_return_value): Likewise.
* sh-tdep.c (sh_return_value_nofpu): Likewise.
(sh_return_value_fpu): Likewise.
* sh64-tdep.c (sh64_return_value): Likewise.
* sparc-tdep.c (sparc32_return_value): Likewise.
* sparc64-tdep.c (sparc64_return_value): Likewise.
* spu-tdep.c (spu_return_value): Likewise.
* tic6x-tdep.c (tic6x_return_value): Likewise.
* v850-tdep.c (v850_return_value): Likewise.
* vax-tdep.c (vax_return_value): Likewise.
* xstormy16-tdep.c (xstormy16_return_value): Likewise.
* xtensa-tdep.c (xtensa_return_value): Likewise.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
gdb/testsuite/
* gdb.base/return-nodebug.exp: Also test float and double types.
* frame.c (frame_unwind_register): Throw an error if unwinding the
register failed.
* get_prev_frame_1 (get_prev_frame_1): Ask the unwinder if there's
an unwind stop reason.
(frame_stop_reason_string): Handle UNWIND_UNAVAILABLE.
* frame.h (enum unwind_stop_reason) <UNWIND_OUTERMOST,
UNWIND_UNAVAILABLE>: New.
* inline-frame.c (inline_frame_unwind): Install
default_frame_unwind_stop_reason.
* frame-unwind.c: Include "exceptions.h".
(frame_unwind_find_by_frame): Swallow NOT_AVAILABLE_ERROR errors.
(default_frame_unwind_stop_reason): New.
* frame-unwind.h (frame_unwind_stop_reason_ftype): New typedef.
(default_frame_unwind_stop_reason): Declare.
(struct frame_unwind) <stop_reason>: New function pointer.
* dummy-frame.c: Install default_frame_unwind_stop_reason.
* dwarf2-frame.c: Include exceptions.h.
(struct dwarf2_frame_cache) <unavailable_retaddr>: New field.
(dwarf2_frame_cache): Swallow NOT_AVAILABLE_ERROR errors when
computing the CFA. If such an error was thrown, set
unavailable_retaddr.
(dwarf2_frame_unwind_stop_reason): New.
(dwarf2_frame_this_id): Don't build a frame id if the CFA was
unavailable.
(dwarf2_frame_unwind): Install dwarf2_frame_unwind_stop_reason.
(dwarf2_signal_frame_unwind): Ditto.
* amd64-tdep.c: Include "exceptions.h".
(struct amd64_frame_cache): New field "base_p".
(amd64_init_frame_cache): Clear it.
(amd64_frame_cache_1): New, factored out from amd64_frame_cache.
Avoid reading registers with functions that throw if the register
is not necessary to compute the frame base.
(amd64_frame_cache): Reimplement wrapping amd64_frame_cache_1, and
swallowing NOT_AVAILABLE_ERROR.
(amd64_frame_unwind_stop_reason): New.
(amd64_frame_this_id): Don't build a frame id if the frame base
was unavailable.
(amd64_frame_unwind): Install amd64_frame_unwind_stop_reason.
(amd64_sigtramp_frame_cache): Swallow NOT_AVAILABLE_ERROR, and set
base_p if the frame base was computable.
(amd64_sigtramp_frame_unwind_stop_reason): New.
(amd64_sigtramp_frame_this_id): Don't build a frame id if the
frame base was unavailable.
(amd64_sigtramp_frame_unwind): Install
amd64_sigtramp_frame_unwind_stop_reason.
(amd64_epilogue_frame_cache): Swallow NOT_AVAILABLE_ERROR, and set
base_p if the frame base was computable.
(amd64_epilogue_frame_unwind_stop_reason): New.
(amd64_epilogue_frame_this_id): Don't build a frame id if the
frame base was unavailable.
(amd64_epilogue_frame_unwind): Install
amd64_epilogue_frame_unwind_stop_reason.
* i386-tdep.c: Include "exceptions.h".
(struct i386_frame_cache): New field "base_p".
(i386_init_frame_cache): Clear it.
(i386_frame_cache_1): New, factored out from amd64_frame_cache.
Avoid reading registers with functions that throw if the register
is not necessary to compute the frame base.
(i386_frame_cache): Reimplement wrapping amd64_frame_cache_1, and
swallowing NOT_AVAILABLE_ERROR.
(i386_frame_unwind_stop_reason): New.
(i386_frame_this_id): Don't build a frame id if the frame base was
unavailable.
(i386_frame_prev_register): Handle unavailable SP.
(i386_frame_unwind): Install i386_frame_unwind_stop_reason.
(i386_epilogue_frame_cache): Swallow NOT_AVAILABLE_ERROR, and set
base_p if the frame base was computable.
(i386_epilogue_frame_unwind_stop_reason): New.
(i386_epilogue_frame_this_id): Don't build a frame id if the frame
base was unavailable.
(i386_epilogue_frame_unwind): Install
i386_epilogue_frame_unwind_stop_reason.
(i386_sigtramp_frame_cache): Swallow NOT_AVAILABLE_ERROR, and set
base_p if the frame base was computable.
(i386_sigtramp_frame_unwind_stop_reason): New.
(i386_sigtramp_frame_this_id): Don't build a frame id if the frame
base was unavailable.
(i386_sigtramp_frame_unwind): Install
i386_sigtramp_frame_unwind_stop_reason.
* sentinel-frame.c (sentinel_frame_prev_register): Use the value
type's size, not the register's.
(sentinel_frame_unwind): Install default_frame_unwind_stop_reason.
* alpha-mdebug-tdep.c (alpha_mdebug_frame_unwind): Install
default_frame_unwind_stop_reason.
* alpha-tdep.c (alpha_sigtramp_frame_unwind)
(alpha_heuristic_frame_unwind): Ditto.
* amd64obsd-tdep.c (amd64obsd_trapframe_unwind): Ditto.
* arm-tdep.c (arm_prologue_unwind, arm_stub_unwind): Ditto.
* avr-tdep.c (avr_frame_unwind): Ditto.
* cris-tdep.c (cris_sigtramp_frame_unwind, cris_frame_unwind):
Ditto.
* frv-linux-tdep.c (frv_linux_sigtramp_frame_unwind): Ditto.
* frv-tdep.c (frv_frame_unwind): Ditto.
* h8300-tdep.c (h8300_frame_unwind): Ditto.
* hppa-hpux-tdep.c (hppa_hpux_sigtramp_frame_unwind): Ditto.
* hppa-linux-tdep.c (hppa_linux_sigtramp_frame_unwind): Ditto.
* hppa-tdep.c (hppa_frame_unwind, hppa_fallback_frame_unwind)
(hppa_stub_frame_unwind): Ditto.
* i386obsd-tdep.c (i386obsd_trapframe_unwind): Ditto.
* ia64-tdep.c (ia64_frame_unwind, ia64_sigtramp_frame_unwind)
(ia64_libunwind_frame_unwind)
(ia64_libunwind_sigtramp_frame_unwind): Ditto.
* iq2000-tdep.c (iq2000_frame_unwind): Ditto.
* lm32-tdep.c (lm32_frame_unwind): Ditto.
* m32c-tdep.c (m32c_unwind): Ditto.
* m32r-linux-tdep.c (m32r_linux_sigtramp_frame_unwind): Ditto.
* m32r-tdep.c (m32r_frame_unwind): Ditto.
* m68hc11-tdep.c (m68hc11_frame_unwind): Ditto.
* m68k-tdep.c (m68k_frame_unwind): Ditto.
* m68klinux-tdep.c (m68k_linux_sigtramp_frame_unwind): Ditto.
* m88k-tdep.c (m88k_frame_unwind): Ditto.
* mep-tdep.c (mep_frame_unwind): Ditto.
* microblaze-tdep.c (microblaze_frame_unwind): Ditto.
* mips-tdep.c (mips_insn16_frame_unwind, mips_insn32_frame_unwind)
(mips_stub_frame_unwind): Ditto.
* mn10300-tdep.c (mn10300_frame_unwind): Ditto.
* moxie-tdep.c (moxie_frame_unwind): Ditto.
* mt-tdep.c (mt_frame_unwind): Ditto.
* ppc-linux-tdep.c (ppu2spu_unwind): Ditto.
* ppcobsd-tdep.c (ppcobsd_sigtramp_frame_unwind): Ditto.
* rs6000-tdep.c (rs6000_frame_unwind): Ditto.
* s390-tdep.c (s390_frame_unwind, s390_stub_frame_unwind)
(s390_sigtramp_frame_unwind): Ditto.
* score-tdep.c (score_prologue_unwind): Ditto.
* sh-tdep.c (sh_frame_unwind): Ditto.
* sh64-tdep.c (sh64_frame_unwind): Ditto.
* sparc-sol2-tdep.c (sparc32_sol2_sigtramp_frame_unwind): Ditto.
* sparc-tdep.c (sparc32_frame_unwind): Ditto.
* sparc64-sol2-tdep.c (sparc64_sol2_sigtramp_frame_unwind): Ditto.
* sparc64-tdep.c (sparc64_frame_unwind): Ditto.
* sparc64fbsd-tdep.c (sparc64fbsd_sigtramp_frame_unwind): Ditto.
* sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_frame_unwind): Ditto.
* sparc64obsd-tdep.c (sparc64obsd_frame_unwind)
(sparc64obsd_trapframe_unwind): Ditto.
* sparcnbsd-tdep.c (sparc32nbsd_sigcontext_frame_unwind): Ditto.
* sparcobsd-tdep.c (sparc32obsd_sigtramp_frame_unwind): Ditto.
* spu-tdep.c (spu_frame_unwind, spu2ppu_unwind): Ditto.
* v850-tdep.c (v850_frame_unwind): Ditto.
* vax-tdep.c (vax_frame_unwind): Ditto.
* vaxobsd-tdep.c (vaxobsd_sigtramp_frame_unwind): Ditto.
* xstormy16-tdep.c (frame_unwind xstormy16_frame_unwind): Ditto.
* xtensa-tdep.c (xtensa_unwind): Ditto.
Stan Shebs <stan@codesourcery.com>
Add base multi-executable/process support to GDB.
gdb/
* Makefile.in (SFILES): Add progspace.c.
(COMMON_OBS): Add progspace.o.
* progspace.h: New.
* progspace.c: New.
* breakpoint.h (struct bp_target_info) <placed_address_space>: New
field.
(struct bp_location) <pspace>: New field.
(struct breakpoint) <pspace>: New field.
(bpstat_stop_status, breakpoint_here_p)
(moribund_breakpoint_here_p, breakpoint_inserted_here_p)
(regular_breakpoint_inserted_here_p)
(software_breakpoint_inserted_here_p, breakpoint_thread_match)
(set_default_breakpoint): Adjust prototypes.
(remove_breakpoints_pid, breakpoint_program_space_exit): Declare.
(insert_single_step_breakpoint, deprecated_insert_raw_breakpoint):
Adjust prototypes.
* breakpoint.c (executing_startup): Delete.
(default_breakpoint_sspace): New.
(breakpoint_restore_shadows): Skip if the address space doesn't
match.
(update_watchpoint): Record the frame's program space in the
breakpoint location.
(insert_bp_location): Record the address space in target_info.
Adjust to pass the symbol space to solib_name_from_address.
(breakpoint_program_space_exit): New.
(insert_breakpoint_locations): Switch the symbol space and thread
when inserting breakpoints. Don't insert breakpoints in a vfork
parent waiting for vfork done if we're not attached to the vfork
child.
(remove_breakpoints_pid): New.
(reattach_breakpoints): Switch to a thread of PID. Ignore
breakpoints of other symbol spaces.
(create_internal_breakpoint): Store the symbol space in the sal.
(create_longjmp_master_breakpoint): Iterate over all symbol
spaces.
(update_breakpoints_after_exec): Ignore breakpoints for other
symbol spaces.
(remove_breakpoint): Rename to ...
(remove_breakpoint_1): ... this. Pass the breakpoints symbol
space to solib_name_from_address.
(remove_breakpoint): New.
(mark_breakpoints_out): Ignore breakpoints from other symbol
spaces.
(breakpoint_init_inferior): Ditto.
(breakpoint_here_p): Add an address space argument and adjust to
use breakpoint_address_match.
(moribund_breakpoint_here_p): Ditto.
(regular_breakpoint_inserted_here_p): Ditto.
(breakpoint_inserted_here_p): Ditto.
(software_breakpoint_inserted_here_p): Ditto.
(breakpoint_thread_match): Ditto.
(bpstat_check_location): Ditto.
(bpstat_stop_status): Ditto.
(print_breakpoint_location): If there's a location to print,
switch the current symbol space.
(print_one_breakpoint_location): Add `allflag' argument.
(print_one_breakpoint): Ditto. Adjust.
(do_captured_breakpoint_query): Adjust.
(breakpoint_1): Adjust.
(breakpoint_has_pc): Also match the symbol space.
(describe_other_breakpoints): Add a symbol space argument and
adjust.
(set_default_breakpoint): Add a symbol space argument. Set
default_breakpoint_sspace.
(breakpoint_address_match): New.
(check_duplicates_for): Add an address space argument, and adjust.
(set_raw_breakpoint): Record the symbol space in the location and
in the breakpoint.
(set_longjmp_breakpoint): Skip longjmp master breakpoints from
other symbol spaces.
(remove_thread_event_breakpoints, remove_solib_event_breakpoints)
(disable_breakpoints_in_shlibs): Skip breakpoints from other
symbol spaces.
(disable_breakpoints_in_unloaded_shlib): Match symbol spaces.
(create_catchpoint): Set the symbol space in the sal.
(disable_breakpoints_before_startup): Skip breakpoints from other
symbol spaces. Set executing_startup in the current symbol space.
(enable_breakpoints_after_startup): Clear executing_startup in the
current symbol space. Skip breakpoints from other symbol spaces.
(clone_momentary_breakpoint): Also copy the symbol space.
(add_location_to_breakpoint): Set the location's symbol space.
(bp_loc_is_permanent): Switch thread and symbol space.
(create_breakpoint): Adjust.
(expand_line_sal_maybe): Expand comment to mention symbol spaces.
Switch thread and symbol space when reading memory.
(parse_breakpoint_sals): Set the symbol space in the sal.
(break_command_really): Ditto.
(skip_prologue_sal): Switch and space.
(resolve_sal_pc): Ditto.
(watch_command_1): Record the symbol space in the sal.
(create_ada_exception_breakpoint): Adjust.
(clear_command): Adjust. Match symbol spaces.
(update_global_location_list): Use breakpoint_address_match.
(breakpoint_re_set_one): Switch thread and space.
(breakpoint_re_set): Save symbol space.
(breakpoint_re_set_thread): Also reset the symbol space.
(deprecated_insert_raw_breakpoint): Add an address space argument.
Adjust.
(insert_single_step_breakpoint): Ditto.
(single_step_breakpoint_inserted_here_p): Ditto.
(clear_syscall_counts): New.
(_initialize_breakpoint): Install it as inferior_exit observer.
* exec.h: Include "progspace.h".
(exec_bfd, exec_bfd_mtime): New defines.
(exec_close): Declare.
* exec.c: Include "gdbthread.h" and "progspace.h".
(exec_bfd, exec_bfd_mtime, current_target_sections_1): Delete.
(using_exec_ops): New.
(exec_close_1): Rename to exec_close, and make public.
(exec_close): Rename to exec_close_1, and adjust all callers. Add
description. Remove target sections and close executables from
all program spaces.
(exec_file_attach): Add comment.
(add_target_sections): Check on `using_exec_ops' to check if the
target should be pushed.
(remove_target_sections): Only unpush the target if there are no
more target sections in any symbol space.
* gdbcore.h: Include "exec.h".
(exec_bfd, exec_bfd_mtime): Remove declarations.
* frame.h (get_frame_program_space, get_frame_address_space)
(frame_unwind_program_space): Declare.
* frame.c (struct frame_info) <pspace, aspace>: New fields.
(create_sentinel_frame): Add program space argument. Set the
pspace and aspace fields of the frame object.
(get_current_frame, create_new_frame): Adjust.
(get_frame_program_space): New.
(frame_unwind_program_space): New.
(get_frame_address_space): New.
* stack.c (print_frame_info): Adjust.
(print_frame): Use the frame's program space.
* gdbthread.h (any_live_thread_of_process): Declare.
* thread.c (any_live_thread_of_process): New.
(switch_to_thread): Switch the program space as well.
(restore_selected_frame): Don't warn if trying to restore frame
level 0.
* inferior.h: Include "progspace.h".
(detach_fork): Declare.
(struct inferior) <removable, aspace, pspace>
<vfork_parent, vfork_child, pending_detach>
<waiting_for_vfork_done>: New fields.
<terminal_info>: Remove field.
<data, num_data>: New fields.
(register_inferior_data, register_inferior_data_with_cleanup)
(clear_inferior_data, set_inferior_data, inferior_data): Declare.
(exit_inferior, exit_inferior_silent, exit_inferior_num_silent)
(inferior_appeared): Declare.
(find_inferior_pid): Typo.
(find_inferior_id, find_inferior_for_program_space): Declare.
(set_current_inferior, save_current_inferior, prune_inferiors)
(number_of_inferiors): Declare.
(inferior_list): Declare.
* inferior.c: Include "gdbcore.h" and "symfile.h".
(inferior_list): Make public.
(delete_inferior_1): Always delete thread silently.
(find_inferior_id): Make public.
(current_inferior_): New.
(current_inferior): Use it.
(set_current_inferior): New.
(restore_inferior): New.
(save_current_inferior): New.
(free_inferior): Free the per-inferior data.
(add_inferior_silent): Allocate per-inferior data.
Call inferior_appeared.
(delete_threads_of_inferior): New.
(delete_inferior_1): Adjust interface to take an inferior pointer.
(delete_inferior): Adjust.
(delete_inferior_silent): Adjust.
(exit_inferior_1): New.
(exit_inferior): New.
(exit_inferior_silent): New.
(exit_inferior_num_silent): New.
(detach_inferior): Adjust.
(inferior_appeared): New.
(discard_all_inferiors): Adjust.
(find_inferior_id): Make public. Assert pid is not zero.
(find_inferior_for_program_space): New.
(have_inferiors): Check if we have any inferior with pid not zero.
(have_live_inferiors): Go over all pushed targets looking for
process_stratum.
(prune_inferiors): New.
(number_of_inferiors): New.
(print_inferior): Add executable column. Print vfork parent/child
relationships.
(inferior_command): Adjust to cope with not running inferiors.
(remove_inferior_command): New.
(add_inferior_command): New.
(clone_inferior_command): New.
(struct inferior_data): New.
(struct inferior_data_registration): New.
(struct inferior_data_registry): New.
(inferior_data_registry): New.
(register_inferior_data_with_cleanup): New.
(register_inferior_data): New.
(inferior_alloc_data): New.
(inferior_free_data): New.
(clear_inferior_data): New.
(set_inferior_data): New.
(inferior_data): New.
(initialize_inferiors): New.
(_initialize_inferiors): Register "add-inferior",
"remove-inferior" and "clone-inferior" commands.
* objfiles.h: Include "progspace.h".
(struct objfile) <pspace>: New field.
(symfile_objfile, object_files): Don't declare.
(ALL_PSPACE_OBJFILES): New.
(ALL_PSPACE_OBJFILES_SAFE): New.
(ALL_OBJFILES, ALL_OBJFILES_SAFE): Adjust.
(ALL_PSPACE_SYMTABS): New.
(ALL_PRIMARY_SYMTABS): Adjust.
(ALL_PSPACE_PRIMARY_SYMTABS): New.
(ALL_PSYMTABS): Adjust.
(ALL_PSPACE_PSYMTABS): New.
* objfiles.c (object_files, symfile_objfile): Delete.
(struct objfile_sspace_info): New.
(objfiles_pspace_data): New.
(objfiles_pspace_data_cleanup): New.
(get_objfile_pspace_data): New.
(objfiles_changed_p): Delete.
(allocate_objfile): Set the objfile's program space. Adjust to
reference objfiles_changed_p in pspace data.
(free_objfile): Adjust to reference objfiles_changed_p in pspace
data.
(objfile_relocate): Ditto.
(update_section_map): Add pspace argument. Adjust to iterate over
objfiles in the passed in pspace.
(find_pc_section): Delete sections and num_sections statics.
Adjust to refer to program space's objfiles_changed_p. Adjust to
refer to sections and num_sections store in the objfile's pspace
data.
(objfiles_changed): Adjust to reference objfiles_changed_p in
pspace data.
(_initialize_objfiles): New.
* linespec.c (decode_all_digits, decode_dollar): Set the sal's
program space.
* source.c (current_source_pspace): New.
(get_current_source_symtab_and_line): Set the sal's program space.
(set_current_source_symtab_and_line): Set current_source_pspace.
(select_source_symtab): Ditto. Use ALL_OBJFILES.
(forget_cached_source_info): Iterate over all program spaces.
* symfile.c (clear_symtab_users): Adjust.
* symmisc.c (print_symbol_bcache_statistics): Iterate over all
program spaces.
(print_objfile_statistics): Ditto.
(maintenance_print_msymbols): Ditto.
(maintenance_print_objfiles): Ditto.
(maintenance_info_symtabs): Ditto.
(maintenance_info_psymtabs): Ditto.
* symtab.h (SYMTAB_PSPACE): New.
(struct symtab_and_line) <pspace>: New field.
* symtab.c (init_sal): Clear the sal's program space.
(find_pc_sect_symtab): Set the sal's program space. Switch thread
and space.
(append_expanded_sal): Add program space argument. Iterate over
all program spaces.
(expand_line_sal): Iterate over all program spaces. Switch
program space.
* target.h (enum target_waitkind) <TARGET_WAITKIND_VFORK_DONE>: New.
(struct target_ops) <to_thread_address_space>: New field.
(target_thread_address_space): Define.
* target.c (target_detach): Only remove breakpoints from the
inferior we're detaching.
(target_thread_address_space): New.
* defs.h (initialize_progspace): Declare.
* top.c (gdb_init): Call it.
* solist.h (struct so_list) <sspace>: New field.
* solib.h (struct program_space): Forward declare.
(solib_name_from_address): Adjust prototype.
* solib.c (so_list_head): Replace with a macro referencing the
program space.
(update_solib_list): Set the so's program space.
(solib_name_from_address): Add a program space argument and adjust.
* solib-svr4.c (struct svr4_info) <pid>: Delete field.
<interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low>
<interp_plt_sect_high>: New fields.
(svr4_info_p, svr4_info): Delete.
(solib_svr4_sspace_data): New.
(get_svr4_info): Rewrite.
(svr4_sspace_data_cleanup): New.
(open_symbol_file_object): Adjust.
(svr4_default_sos): Adjust.
(svr4_fetch_objfile_link_map): Adjust.
(interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low)
(interp_plt_sect_high): Delete.
(svr4_in_dynsym_resolve_code): Adjust.
(enable_break): Adjust.
(svr4_clear_solib): Revert bit that removed the svr4_info here,
and reinstate clearing debug_base, debug_loader_offset_p,
debug_loader_offset and debug_loader_name.
(_initialize_svr4_solib): Register solib_svr4_pspace_data. Don't
install an inferior_exit observer anymore.
* printcmd.c (struct display) <pspace>: New field.
(display_command): Set the display's sspace.
(do_one_display): Match the display's sspace.
(display_uses_solib_p): Ditto.
* linux-fork.c (detach_fork): Moved to infrun.c.
(_initialize_linux_fork): Moved "detach-on-fork" command to
infrun.c.
* infrun.c (detach_fork): Moved from linux-fork.c.
(proceed_after_vfork_done): New.
(handle_vfork_child_exec_or_exit): New.
(follow_exec_mode_replace, follow_exec_mode_keep)
(follow_exec_mode_names, follow_exec_mode_string)
(show_follow_exec_mode_string): New.
(follow_exec): New. Reinstate the mark_breakpoints_out call.
Remove shared libraries before attaching new executable. If user
wants to keep the inferior, keep it.
(displaced_step_fixup): Adjust to pass an address space to the
breakpoints module.
(resume): Ditto.
(clear_proceed_status): In all-stop mode, always clear the proceed
status of all threads.
(prepare_to_proceed): Adjust to pass an address space to the
breakpoints module.
(proceed): Ditto.
(adjust_pc_after_break): Ditto.
(handle_inferior_event): When handling a process exit, switch the
program space to the inferior's that had exited. Call
handle_vfork_child_exec_or_exit. Adjust to pass an address space
to the breakpoints module. In non-stop mode, when following a
fork and detach-fork is off, also resume the other branch. Handle
TARGET_WAITKIND_VFORK_DONE. Set the program space in sals.
(normal_stop): Prune inferiors.
(_initialize_infrun): Install the new "follow-exec-mode" command.
"detach-on-fork" moved here.
* regcache.h (get_regcache_aspace): Declare.
* regcache.c (struct regcache) <aspace>: New field.
(regcache_xmalloc): Clear the aspace.
(get_regcache_aspace): New.
(regcache_cpy): Copy the aspace field.
(regcache_cpy_no_passthrough): Ditto.
(get_thread_regcache): Fetch the thread's address space from the
target, and store it in the regcache.
* infcall.c (call_function_by_hand): Set the sal's pspace.
* arch-utils.c (default_has_shared_address_space): New.
* arch-utils.h (default_has_shared_address_space): Declare.
* gdbarch.sh (has_shared_address_space): New.
* gdbarch.h, gdbarch.c: Regenerate.
* linux-tdep.c: Include auxv.h, target.h, elf/common.h.
(linux_has_shared_address_space): New.
(_initialize_linux_tdep): Declare.
* arm-tdep.c (arm_software_single_step): Pass the frame's address
space to insert_single_step_breakpoint.
* arm-linux-tdep.c (arm_linux_software_single_step): Pass the
frame's pspace to breakpoint functions.
* cris-tdep.c (crisv32_single_step_through_delay): Ditto.
(cris_software_single_step): Ditto.
* mips-tdep.c (deal_with_atomic_sequence): Add frame argument.
Pass the frame's pspace to breakpoint functions.
(mips_software_single_step): Adjust.
(mips_single_step_through_delay): Adjust.
* rs6000-aix-tdep.c (rs6000_software_single_step): Adjust.
* rs6000-tdep.c (ppc_deal_with_atomic_sequence): Adjust.
* solib-irix.c (enable_break): Adjust to pass the current frame's
address space to breakpoint functions.
* sparc-tdep.c (sparc_software_single_step): Ditto.
* spu-tdep.c (spu_software_single_step): Ditto.
* alpha-tdep.c (alpha_software_single_step): Ditto.
* record.c (record_wait): Adjust to pass an address space to the
breakpoints module.
* fork-child.c (fork_inferior): Set the new inferior's program and
address spaces.
* inf-ptrace.c (inf_ptrace_follow_fork): Copy the parent's program
and address spaces.
(inf_ptrace_attach): Set the inferior's program and address spaces.
* linux-nat.c: Include "solib.h".
(linux_child_follow_fork): Manage parent and child's program and
address spaces. Clone the parent's program space if necessary.
Don't wait for the vfork to be done here. Refuse to resume if
following the vfork parent while leaving the child stopped.
(resume_callback): Don't resume a vfork parent.
(linux_nat_resume): Also check for pending events in the
lp->waitstatus field.
(linux_handle_extended_wait): Report TARGET_WAITKIND_VFORK_DONE
events to the core.
(stop_wait_callback): Don't wait for SIGSTOP on vfork parents.
(cancel_breakpoint): Adjust.
* linux-thread-db.c (thread_db_wait): Don't remove thread event
breakpoints here.
(thread_db_mourn_inferior): Don't mark breakpoints out here.
Remove thread event breakpoints after mourning.
* corelow.c: Include progspace.h.
(core_open): Set the inferior's program and address spaces.
* remote.c (remote_add_inferior): Set the new inferior's program
and address spaces.
(remote_start_remote): Update address spaces.
(extended_remote_create_inferior_1): Don't init the thread list if
we already debugging other inferiors.
* darwin-nat.c (darwin_attach): Set the new inferior's program and
address spaces.
* gnu-nat.c (gnu_attach): Ditto.
* go32-nat.c (go32_create_inferior): Ditto.
* inf-ttrace.c (inf_ttrace_follow_fork, inf_ttrace_attach): Ditto.
* monitor.c (monitor_open): Ditto.
* nto-procfs.c (procfs_attach, procfs_create_inferior): Ditto.
* procfs.c (do_attach): Ditto.
* windows-nat.c (do_initial_windows_stuff): Ditto.
* inflow.c (inferior_process_group)
(terminal_init_inferior_with_pgrp, terminal_inferior,
(terminal_ours_1, inflow_inferior_exit, copy_terminal_info)
(child_terminal_info, new_tty_postfork, set_sigint_trap): Adjust
to use per-inferior data instead of inferior->terminal_info.
(inflow_inferior_data): New.
(inflow_new_inferior): Delete.
(inflow_inferior_data_cleanup): New.
(get_inflow_inferior_data): New.
* mi/mi-interp.c (mi_new_inferior): Rename to...
(mi_inferior_appeared): ... this.
(mi_interpreter_init): Adjust.
* tui/tui-disasm.c: Include "progspace.h".
(tui_set_disassem_content): Pass an address space to
breakpoint_here_p.
* NEWS: Mention multi-program debugging support. Mention new
commands "add-inferior", "clone-inferior", "remove-inferior",
"maint info program-spaces", and new option "set
follow-exec-mode".
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/doc/
* observer.texi (new_inferior): Rename to...
(inferior_appeared): ... this.
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/testsuite/
* gdb.base/foll-vfork.exp: Adjust to spell out "follow-fork".
* gdb.base/foll-exec.exp: Adjust to expect a process id before
"Executing new program".
* gdb.base/foll-fork.exp: Adjust to spell out "follow-fork".
* gdb.base/multi-forks.exp: Ditto. Adjust to the inferior being
left listed after having been killed.
* gdb.base/attach.exp: Adjust to spell out "symbol-file".
* gdb.base/maint.exp: Adjust test.
* Makefile.in (ALL_SUBDIRS): Add gdb.multi.
* gdb.multi/Makefile.in: New.
* gdb.multi/base.exp: New.
* gdb.multi/goodbye.c: New.
* gdb.multi/hangout.c: New.
* gdb.multi/hello.c: New.
* gdb.multi/bkpt-multi-exec.c: New.
* gdb.multi/bkpt-multi-exec.exp: New.
* gdb.multi/crashme.c: New.
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/doc/
* gdb.texinfo (Inferiors): Rename node to ...
(Inferiors and Programs): ... this. Mention running multiple
programs in the same debug session.
<info inferiors>: Mention the new 'Executable' column if "info
inferiors". Update examples. Document the "add-inferior",
"clone-inferior", "remove-inferior" and "maint info
program-spaces" commands.
(Process): Rename node to...
(Forks): ... this. Document "set|show follow-exec-mode".
gdbarch_convert_from_func_ptr_addr.
* cris-tdep.c: Remove outdated comment.
* infcall.c (call_function_by_hand): Do not call
gdbarch_convert_from_func_ptr_addr after entry_point_address.
* objfiles.c (entry_point_address): Call both
gdbarch_convert_from_func_ptr_addr and
gdbarch_addr_bits_remove.
Pedro Alves
Andreas Arnez
Joel Brobecker
Yao Qi
Trevor Saunders
Doug Evans
Simon Marchi
Gary Benson
Sanimir Agovic
Tom Tromey
Ricard Wanderlof
Joel Brobecker
Siddhesh Poyarekar
Sergio Durigan Junior
Maciej W. Rozycki
Jan Kratochvil
Michael Snyder
Pierre Muller
Daniel Jacobowitz
Ulrich Weigand