As a preparation for the next patch, which will move fork_inferior
from GDB to common/ (and therefore share it with gdbserver), it is
interesting to convert a few functions to C++.
This patch touches functions related to parsing command-line arguments
to the inferior (see gdb/fork-child.c:breakup_args), the way the
arguments are stored on fork_inferior (using std::vector instead of
char **), and the code responsible for dealing with argv also on
gdbserver.
I've taken this opportunity and decided to constify a few arguments to
fork_inferior/create_inferior as well, in order to make the code
cleaner. And now, on gdbserver, we're using xstrdup everywhere and
aren't checking for memory allocation failures anymore, as requested
by Pedro:
<https://sourceware.org/ml/gdb-patches/2017-03/msg00191.html>
Message-Id: <025ebdb9-90d9-d54a-c055-57ed2406b812@redhat.com>
Pedro Alves wrote:
> On the "== NULL" check: IIUC, the old NULL check was there to
> handle strdup returning NULL due to out-of-memory.
> See NULL checks and comments further above in this function.
> Now that you're using a std::vector, that doesn't work or make
> sense any longer, since if push_back fails to allocate space for
> its internal buffer (with operator new), our operator new replacement
> (common/new-op.c) calls malloc_failure, which aborts gdbserver.
>
> Not sure it makes sense to handle out-of-memory specially in
> the gdb/rsp-facing functions nowadays (maybe git blame/log/patch
> submission for that code shows some guidelines). Maybe (or, probably)
> it's OK to stop caring about it, but then we should consistently remove
> left over code, by using xstrdup instead and remove the NULL checks.
IMO this refactoring was very good to increase the readability of the
code as well, because some parts of the argument handling were
unnecessarily confusing before.
gdb/ChangeLog:
2017-04-12 Sergio Durigan Junior <sergiodj@redhat.com>
* common/common-utils.c (free_vector_argv): New function.
* common/common-utils.h: Include <vector>.
(free_vector_argv): New prototype.
* darwin-nat.c (darwin_create_inferior): Rewrite function
prototype in order to constify "exec_file" and accept a
"std::string" for "allargs".
* fork-child.c: Include <vector>.
(breakup_args): Rewrite function, using C++.
(fork_inferior): Rewrite function header, constify "exec_file_arg"
and accept "std::string" for "allargs". Update the code to
calculate "argv" based on "allargs". Update calls to "exec_fun"
and "execvp".
* gnu-nat.c (gnu_create_inferior): Rewrite function prototype in
order to constify "exec_file" and accept a "std::string" for
"allargs".
* go32-nat.c (go32_create_inferior): Likewise.
* inf-ptrace.c (inf_ptrace_create_inferior): Likewise.
* infcmd.c (run_command_1): Constify "exec_file". Use
"std::string" for inferior arguments.
* inferior.h (fork_inferior): Update prototype.
* linux-nat.c (linux_nat_create_inferior): Rewrite function
prototype in order to constify "exec_file" and accept a
"std::string" for "allargs".
* nto-procfs.c (procfs_create_inferior): Likewise.
* procfs.c (procfs_create_inferior): Likewise.
* remote-sim.c (gdbsim_create_inferior): Likewise.
* remote.c (extended_remote_run): Update code to accept
"std::string" as argument.
(extended_remote_create_inferior): Rewrite function prototype in
order to constify "exec_file" and accept a "std::string" for
"allargs".
* rs6000-nat.c (super_create_inferior): Likewise.
(rs6000_create_inferior): Likewise.
* target.h (struct target_ops) <to_create_inferior>: Likewise.
* windows-nat.c (windows_create_inferior): Likewise.
gdb/gdbserver/ChangeLog:
2017-04-12 Sergio Durigan Junior <sergiodj@redhat.com>
* server.c: Include <vector>.
<program_argv, wrapper_argv>: Convert to std::vector.
(start_inferior): Rewrite function to use C++.
(handle_v_run): Likewise. Update code that calculates the argv
based on the vRun packet; use C++.
(captured_main): Likewise.
This patch fixes PR gdb/16188, which is about the fact that
fork_inferior doesn't verify the return value of the "traceme_fun"
callback. On most targets, this callback is actually a wrapper to a
ptrace call that does a PTRACE_TRACEME on the forked GDB process that
will eventually become the inferior.
Thanks to Pedro, this second version of the patch is simpler and more
more logical. Basically, two helper functions are added:
trace_start_error and trace_start_error_with_name. The former can be
used when there is a customized error message to be printed to the
user. The latter works like perror_with_name, so you just need to
pass the function that error'd.
Both helper functions mentioned above do basically the same thing:
print the error message to stderr and call _exit, properly terminating
the forked inferior.
Most of the patch takes care of guarding the necessary system calls
against errors on the "traceme_fun" callbacks. It is not right to
call error on these situations, so I've replaced these calls with the
proper helper function call.
Regression-tested on BuildBot.
Thanks,
gdb/ChangeLog:
2017-02-20 Sergio Durigan Junior <sergiodj@redhat.com>
Pedro Alves <palves@redhat.com>
PR gdb/16188
* darwin-nat.c (darwin_ptrace_me): Check if calls to system
calls succeeded.
* fork-child.c (trace_start_error): New function.
(trace_start_error_with_name): Likewise.
* gnu-nat.c (gnu_ptrace_me): Check if call to PTRACE succeeded.
* inf-ptrace.c (inf_ptrace_me): Likewise.
* inferior.h (trace_start_error): New prototype.
(trace_start_error_with_name): Likewise.
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
Support message from new task and dead name notification on task of an
existing process.
With Sierra, exec(2) terminate the current task and creates a new one.
'set startup-with-shell off' must still be used on Darwin 16.
2016-11-09 Tristan Gingold <gingold@adacore.com>
* darwin-nat.c (find_inferior_task_it): Fix indentation.
(find_inferior_notify_it): Remove.
(find_inferior_pid_it): New function.
(darwin_find_inferior_by_notify): Remove.
(darwin_find_inferior_by_pid): New function.
(darwin_find_new_inferior): New function.
(darwin_check_message_ndr): New function from
darwin_decode_exception_message.
(darwin_decode_exception_message): Call darwin_check_message_ndr.
Handle SIGTRAP addressed to an unknown task (when a task spawned).
(darwin_decode_notify_message): New function.
(darwin_decode_message): Handle unknown task.
(darwin_deallocate_threads): New function from darwin_mourn_inferior.
(darwin_mourn_inferior): Use darwin_deallocate_threads and
darwin_deallocate_exception_ports.
(darwin_deallocate_exception_ports): New function from
darwin_mourn_inferior.
(darwin_setup_exceptions): New function from darwin_attach_pid.
(darwin_setup_request_notification): Likewise.
(darwin_attach_pid): Call darwin_setup_request_notification and
darwin_setup_request_notification.
This patch consolidates the API of target_mourn_inferior between GDB
and gdbserver, in my continuing efforts to make sharing the
fork_inferior function possible between both.
GDB's version of the function did not care about the inferior's ptid
being mourned, but gdbserver's needed to know this information. Since
it actually makes sense to pass the ptid as an argument, instead of
depending on a global value directly (which GDB's version did), I
decided to make the generic API to accept it. I then went on and
extended all calls being made on GDB to include a ptid argument (which
ended up being inferior_ptid most of the times, anyway), and now we
have a more sane interface.
On GDB's side, after talking to Pedro a bit about it, we decided that
just an assertion to make sure that the ptid being passed is equal to
inferior_ptid would be enough for now, on the GDB side. We can remove
the assertion and perform more operations later if we ever pass
anything different than inferior_ptid.
Regression tested on our BuildBot, everything OK.
I'd appreciate a special look at gdb/windows-nat.c's modification
because I wasn't really sure what to do there. It seemed to me that
maybe I should build a ptid out of the process information there, but
then I am almost sure the assertion on GDB's side would trigger.
gdb/ChangeLog:
2016-09-19 Sergio Durigan Junior <sergiodj@redhat.com>
* darwin-nat.c (darwin_kill_inferior): Adjusting call to
target_mourn_inferior to include ptid_t argument.
* fork-child.c (startup_inferior): Likewise.
* gnu-nat.c (gnu_kill_inferior): Likewise.
* inf-ptrace.c (inf_ptrace_kill): Likewise.
* infrun.c (handle_inferior_event_1): Likewise.
* linux-nat.c (linux_nat_attach): Likewise.
(linux_nat_kill): Likewise.
* nto-procfs.c (interrupt_query): Likewise.
(procfs_interrupt): Likewise.
(procfs_kill_inferior): Likewise.
* procfs.c (procfs_kill_inferior): Likewise.
* record.c (record_mourn_inferior): Likewise.
* remote-sim.c (gdbsim_kill): Likewise.
* remote.c (remote_detach_1): Likewise.
(remote_kill): Likewise.
* target.c (target_mourn_inferior): Change declaration to accept
new ptid_t argument; use gdb_assert on it.
* target.h (target_mourn_inferior): Move function prototype from
here...
* target/target.h (target_mourn_inferior): ... to here. Adjust it
to accept new ptid_t argument.
* windows-nat.c (get_windows_debug_event): Adjusting call to
target_mourn_inferior to include ptid_t argument.
gdb/gdbserver/ChangeLog:
2016-09-19 Sergio Durigan Junior <sergiodj@redhat.com>
* server.c (start_inferior): Call target_mourn_inferior instead of
mourn_inferior; pass ptid_t argument to it.
(resume): Likewise.
(handle_target_event): Likewise.
* target.c (target_mourn_inferior): New function.
* target.h (mourn_inferior): Delete macro.
Several targets have a copy of the same code that prints
"Detaching from program ..."
in their target_detach implementation. Factor that out to a common
function.
(For now, I left the couple targets that print this a bit differently
alone. Maybe this could be further pulled out into infcmd.c. If we
did that, and those targets want to continue printing differently,
this new function could be converted to a target method.)
gdb/ChangeLog:
2016-07-01 Pedro Alves <palves@redhat.com>
* darwin-nat.c (darwin_detach): Use target_announce_detach.
* inf-ptrace.c (inf_ptrace_detach): Likewise.
* nto-procfs.c (procfs_detach): Likewise.
* remote.c (remote_detach_1): Likewise.
* target.c (target_announce_detach): New function.
* target.h (target_announce_detach): New declaration.
Building in C++ mode caught a bug here:
.../src/gdb/darwin-nat.c: In function 'ptid_t darwin_decode_message(mach_msg_header_t*, darwin_thread_t**, inferior**, target_waitstatus*)':
.../src/gdb/darwin-nat.c:1016:25: error: invalid conversion from 'int' to 'gdb_signal' [-fpermissive]
status->value.sig = WTERMSIG (wstatus);
^
gdb/ChangeLog:
2016-04-20 Pedro Alves <palves@redhat.com>
* darwin-nat.c (darwin_decode_message): Use gdb_signal_from_host.
Fixes, with gcc 5.3.0:
.../src/gdb/darwin-nat.c: In function 'void darwin_resume_thread(inferior*, darwin_thread_t*, int, int)':
.../src/gdb/darwin-nat.c:731:21: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
(caddr_t)thread->gdb_port, nsignal);
^
.../src/gdb/darwin-nat.c:84:35: note: in definition of macro 'PTRACE'
darwin_ptrace(#CMD, CMD, (PID), (ADDR), (SIG))
^
thread->gdb_port is an unsigned int, caddr_t is a void pointer.
gdb/ChangeLog:
2016-04-20 Pedro Alves <palves@redhat.com>
* darwin-nat.c (darwin_resume_thread): Add uintptr_t cast.
With "maint set target-non-stop on" we get:
@@ -66,13 +66,16 @@ Continuing.
interrupt
(gdb) PASS: gdb.base/interrupt-noterm.exp: interrupt
-Program received signal SIGINT, Interrupt.
-PASS: gdb.base/interrupt-noterm.exp: inferior received SIGINT
-testcase src/gdb/testsuite/gdb.base/interrupt-noterm.exp completed in 0 seconds
+[process 12119] #1 stopped.
+0x0000003615ebc6d0 in __nanosleep_nocancel () at ../sysdeps/unix/syscall-template.S:81
+81 T_PSEUDO (SYSCALL_SYMBOL, SYSCALL_NAME, SYSCALL_NARGS)
+FAIL: gdb.base/interrupt-noterm.exp: inferior received SIGINT (timeout)
+testcase src/gdb/testsuite/gdb.base/interrupt-noterm.exp completed in 10 seconds
That is, we get "[$thread] #1 stopped" instead of SIGINT.
The issue is that we don't currently distinguish send
"interrupt/ctrl-c" to target terminal vs "stop/pause" thread well;
both cases go through "target_stop".
And then, the native Linux backend (linux-nat.c) implements
target_stop with SIGSTOP in non-stop mode, and SIGINT in all-stop
mode. Since "maint set target-non-stop on" forces the backend to be
always running in non-stop mode, even though the user-visible behavior
is "set non-stop" is "off", "interrupt" causes a SIGSTOP instead of
the SIGINT the test expects.
Fix this by introducing a target_interrupt method to use in the
"interrupt/ctrl-c" case, so "set non-stop off" can always work the
same irrespective of "maint set target-non-stop on/off". I'm
explictly considering changing the "set non-stop on" behavior as out
of scope here.
Most of the patch is an across-the-board rename of to_stop hook
implementations to to_interrupt. The only targets where something
more than a rename is being done are linux-nat.c and remote.c, which
are the only targets that support async, and thus are the only ones
the core side calls target_stop on.
gdb/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* darwin-nat.c (darwin_stop): Rename to ...
(darwin_interrupt): ... this.
(_initialize_darwin_inferior): Adjust.
* gnu-nat.c (gnu_stop): Delete.
(gnu_target): Don't install gnu_stop.
* inf-ptrace.c (inf_ptrace_stop): Rename to ...
(inf_ptrace_interrupt): ... this.
(inf_ptrace_target): Adjust.
* infcmd.c (interrupt_target_1): Use target_interrupt instead of
target_stop.
* linux-nat (linux_nat_stop): Rename to ...
(linux_nat_interrupt): ... this.
(linux_nat_stop): Reimplement.
(linux_nat_add_target): Install linux_nat_interrupt.
* nto-procfs.c (nto_interrupt_twice): Rename to ...
(nto_handle_sigint_twice): ... this.
(nto_interrupt): Rename to ...
(nto_handle_sigint): ... this. Call target_interrupt instead of
target_stop.
(procfs_wait): Adjust.
(procfs_stop): Rename to ...
(procfs_interrupt): ... this.
(init_procfs_targets): Adjust.
* procfs.c (procfs_stop): Rename to ...
(procfs_interrupt): ... this.
(procfs_target): Adjust.
* remote-m32r-sdi.c (m32r_stop): Rename to ...
(m32r_interrupt): ... this.
(init_m32r_ops): Adjust.
* remote-sim.c (gdbsim_stop_inferior): Rename to ...
(gdbsim_interrupt_inferior): ... this.
(gdbsim_stop): Rename to ...
(gdbsim_interrupt): ... this.
(gdbsim_cntrl_c): Adjust.
(init_gdbsim_ops): Adjust.
* remote.c (sync_remote_interrupt): Adjust comments.
(remote_stop_as): Rename to ...
(remote_interrupt_as): ... this.
(remote_stop): Adjust comment.
(remote_interrupt): New function.
(init_remote_ops): Install remote_interrupt.
* target.c (target_interrupt): New function.
* target.h (struct target_ops) <to_interrupt>: New field.
(target_interrupt): New declaration.
* windows-nat.c (windows_stop): Rename to ...
(windows_interrupt): ... this.
* target-delegates.c: Regenerate.
record-btrace was the only target making use of this, and it no longer
uses it.
gdb/ChangeLog:
2015-03-04 Pedro Alves <palves@redhat.com>
* target.h (struct target_ops) <to_decr_pc_after_break>: Delete.
(target_decr_pc_after_break): Delete declaration.
* target.c (default_target_decr_pc_after_break)
(target_decr_pc_after_break): Delete.
* linux-nat.c (check_stopped_by_breakpoint, linux_nat_wait_1): Use
gdbarch_decr_pc_after_break instead of target_decr_pc_after_break.
* linux-thread-db.c (check_event): Likewise.
* infrun.c (adjust_pc_after_break): Likewise.
* darwin-nat.c (cancel_breakpoint): Likewise.
* aix-thread.c (aix_thread_wait): Likewise.
* target-delegates.c: Regenerate.
This patch renames symbols that happen to have names which are
reserved keywords in C++.
Most of this was generated with Tromey's cxx-conversion.el script.
Some places where later hand massaged a bit, to fix formatting, etc.
And this was rebased several times meanwhile, along with re-running
the script, so re-running the script from scratch probably does not
result in the exact same output. I don't think that matters anyway.
gdb/
2015-02-27 Tom Tromey <tromey@redhat.com>
Pedro Alves <palves@redhat.com>
Rename symbols whose names are reserved C++ keywords throughout.
gdb/gdbserver/
2015-02-27 Tom Tromey <tromey@redhat.com>
Pedro Alves <palves@redhat.com>
Rename symbols whose names are reserved C++ keywords throughout.
Fixes building gdb on x86_64-apple-darwin14 with clang, which produces
a number of warnings from -Wformat-nonliteral.
Ref: https://sourceware.org/ml/gdb/2015-02/msg00047.html
gdb/ChangeLog:
2015-02-26 Pedro Alves <palves@redhat.com>
* auto-load.h (file_is_auto_load_safe): Add ATTRIBUTE_PRINTF.
* complaints.c (vcomplaint): Pass argument FMT directly to
printf-like functions instead of complaint->fmt.
* ctf.c (ctf_save_write_metadata): Add ATTRIBUTE_PRINTF.
* darwin-nat.c (inferior_debug): Add ATTRIBUTE_PRINTF.
* compile/compile-loc2c.c (pushf, unary, binary): Add
ATTRIBUTE_PRINTF.
(do_compile_dwarf_expr_to_c): Pass string literal as format string
to pushf.
(BINARY): Pass string literal as format string to 'binary'.
* compile/compile-object-load.c (link_callbacks_einfo): Add
ATTRIBUTE_PRINTF.
* guile/guile-internal.h (gdbscm_printf): Add ATTRIBUTE_PRINTF.
The `machine/setjmp.h' header is no longer present on OS X 10.10, and is
non-standard. Instead, `darwin-nat.c' should be using the standard
`setjmp.h' header.
gdb/ChangeLog:
2015-01-12 James Clarke <jrtc27@jrtc27.com> (tiny patch)
PR gdb/17046
* darwin-nat.c: Replace <machine/setjmp.h> #include by
<setjmp.h> #include.
This patch introduces find_inferior_ptid to replace the common idiom
find_inferior_pid (ptid_get_pid (...));
It replaces all the instances of that idiom that I found with the new
function.
No significant changes before/after the patch in the regression suite
on amd64 linux.
gdb/ChangeLog:
* inferior.c (find_inferior_ptid): New function.
* inferior.h (find_inferior_ptid): New declaration.
* ada-tasks.c (ada_get_task_number): Use find_inferior_ptid.
* corelow.c (core_pid_to_str): Same.
* darwin-nat.c (darwin_resume): Same.
* infrun.c (fetch_inferior_event): Same.
(get_inferior_stop_soon): Same.
(handle_inferior_event): Same.
(handle_signal_stop): Same.
* linux-nat.c (resume_lwp): Same.
(stop_wait_callback): Same.
* mi/mi-interp.c (mi_new_thread): Same.
(mi_thread_exit): Same.
* proc-service.c (ps_pglobal_lookup): Same.
* record-btrace.c (record_btrace_step_thread): Same.
* remote-sim.c (gdbsim_close_inferior): Same.
(gdbsim_resume): Same.
(gdbsim_stop): Same.
* sol2-tdep.c (sol2_core_pid_to_str): Same.
* target.c (memory_xfer_partial_1): Same.
(default_thread_address_space): Same.
* thread.c (thread_change_ptid): Same.
(switch_to_thread): Same.
(do_restore_current_thread_cleanup): Same.
This constifies the "args" argument to the target_ops to_attach
method.
I updated all instances of the method. I could not compile all of
them but I hand-inspected them. In all cases either the argument is
ignored, or it is passed to parse_pid_to_attach. (linux-nat does some
extra stuff, but that one I built...)
If you want to try it on your host of choice, please do so.
The code in parse_pid_to_attach seems a little bogus to me. If there
is a platform with a broken strtoul, we have better methods for fixing
the issue now. However, I left the code as is since it is clearly ok
to do so.
Built and regtested on x86-64 Fedora 20.
2014-06-04 Tom Tromey <tromey@redhat.com>
* procfs.c (procfs_attach): Make "args" const.
* windows-nat.c (windows_attach): Make "args" const.
* nto-procfs.c (procfs_attach): Make "args" const.
* inf-ttrace.c (inf_ttrace_attach): Make "args" const.
* go32-nat.c (go32_attach): Make "args" const.
* gnu-nat.c (gnu_attach): Make "args" const.
* darwin-nat.c (darwin_attach): Make "args" const.
* inf-ptrace.c (inf_ptrace_attach): Make "args" const.
* linux-nat.c (linux_nat_attach): Make "args" const.
* remote.c (extended_remote_attach_1, extended_remote_attach):
Make "args" const.
* target.h (struct target_ops) <to_attach>: Make "args" const.
(find_default_attach): Likewise.
* utils.c (parse_pid_to_attach): Make "args" const.
* utils.h (parse_pid_to_attach): Update.
Most ports do the same thing in the tail of their mourn routine - call
generic_mourn_inferior+inf_child_maybe_unpush_target.
This factors that out to a convenience function. More could be done,
but this converts only the really obvious ones.
Tested by building GDB on x86_64 Fedora 20, mingw32 and djgpp. The
rest is untested, but I think a patch can't get more obvious.
gdb/
2014-05-21 Pedro Alves <palves@redhat.com>
* inf-child.c (inf_child_mourn_inferior): New function.
* inf-child.h (inf_child_mourn_inferior): New declaration.
* darwin-nat.c (darwin_mourn_inferior): Use
inf_child_mourn_inferior.
* gnu-nat.c (gnu_mourn_inferior): Likewise.
* inf-ptrace.c (inf_ptrace_mourn_inferior): Likewise.
* inf-ttrace.c (inf_ttrace_mourn_inferior): Likewise.
* nto-procfs.c (procfs_mourn_inferior): Likewise.
* windows-nat.c (windows_mourn_inferior): Likewise.
Sometimes it's useful to be able to disable the automatic connection
to the native target. E.g., sometimes GDB disconnects from the
extended-remote target I was debugging, without me noticing it, and
then I do "run". That starts the program locally, and only after a
little head scratch session do I figure out the program is running
locally instead of remotely as intended. Same thing with "attach",
"info os", etc.
With the patch, we now can have this instead:
(gdb) set auto-connect-native-target off
(gdb) target extended-remote :9999
...
*gdb disconnects*
(gdb) run
Don't know how to run. Try "help target".
To still be able to connect to the native target with
auto-connect-native-target set to off, I've made "target native" work
instead of erroring out as today.
Before:
(gdb) target native
Use the "run" command to start a native process.
After:
(gdb) target native
Done. Use the "run" command to start a process.
(gdb) maint print target-stack
The current target stack is:
- native (Native process)
- exec (Local exec file)
- None (None)
(gdb) run
Starting program: ./a.out
...
I've also wanted this for the testsuite, when running against the
native-extended-gdbserver.exp board (runs against gdbserver in
extended-remote mode). With a non-native-target board, it's always a
bug to launch a program with the native target. Turns out we still
have one such case this patch catches:
(gdb) break main
Breakpoint 1 at 0x4009e5: file ../../../src/gdb/testsuite/gdb.base/coremaker.c, line 138.
(gdb) run
Don't know how to run. Try "help target".
(gdb) FAIL: gdb.base/corefile.exp: run: with core
On the patch itself, probably the least obvious bit is the need to go
through all targets, and move the unpush_target call to after the
generic_mourn_inferior call instead of before. This is what
inf-ptrace.c does too, ever since multi-process support was added.
The reason inf-ptrace.c does things in that order is that in the
current multi-process/single-target model, we shouldn't unpush the
target if there are still other live inferiors being debugged. The
check for that is "have_inferiors ()" (a misnomer nowadays...), which
does:
have_inferiors (void)
{
for (inf = inferior_list; inf; inf = inf->next)
if (inf->pid != 0)
return 1;
It's generic_mourn_inferior that ends up clearing inf->pid, so we need
to call it before the have_inferiors check. To make all native
targets behave the same WRT to explicit "target native", I've added an
inf_child_maybe_unpush_target function that targets call instead of
calling unpush_target directly, and as that includes the
have_inferiors check, I needed to adjust the targets.
Tested on x86_64 Fedora 20, native, and also with the
extended-gdbserver board.
Confirmed a cross build of djgpp gdb still builds.
Smoke tested a cross build of Windows gdb under Wine.
Untested otherwise.
gdb/
2014-05-21 Pedro Alves <palves@redhat.com>
* inf-child.c (inf_child_ops, inf_child_explicitly_opened): New
globals.
(inf_child_open_target): New function.
(inf_child_open): Use inf_child_open_target to push the target
instead of erroring out.
(inf_child_disconnect, inf_child_close)
(inf_child_maybe_unpush_target): New functions.
(inf_child_target): Install inf_child_disconnect and
inf_child_close. Store a pointer to the returned object.
* inf-child.h (inf_child_open_target, inf_child_maybe_unpush): New
declarations.
* target.c (auto_connect_native_target): New global.
(show_default_run_target): New function.
(find_default_run_target): Return NULL if automatically connecting
to the native target is disabled.
(_initialize_target): Install set/show auto-connect-native-target.
* NEWS: Mention "set auto-connect-native-target", and "target
native".
* linux-nat.c (super_close): New global.
(linux_nat_close): Call super_close.
(linux_nat_add_target): Store a pointer to the base class's
to_close method.
* inf-ptrace.c (inf_ptrace_mourn_inferior, inf_ptrace_detach): Use
inf_child_maybe_unpush.
* inf-ttrace.c (inf_ttrace_him): Don't push the target if it is
already pushed.
(inf_ttrace_mourn_inferior): Only unpush the target after mourning
the inferior. Use inf_child_maybe_unpush_target.
(inf_ttrace_attach): Don't push the target if it is already
pushed.
(inf_ttrace_detach): Use inf_child_maybe_unpush_target.
* darwin-nat.c (darwin_mourn_inferior): Only unpush the target
after mourning the inferior. Use inf_child_maybe_unpush_target.
(darwin_attach_pid): Don't push the target if it is already
pushed.
* gnu-nat.c (gnu_mourn_inferior): Only unpush the target after
mourning the inferior. Use inf_child_maybe_unpush_target.
(gnu_detach): Use inf_child_maybe_unpush_target.
* go32-nat.c (go32_create_inferior): Don't push the target if it
is already pushed.
(go32_mourn_inferior): Use inf_child_maybe_unpush_target.
* nto-procfs.c (procfs_is_nto_target): Adjust comment.
(procfs_open): Rename to ...
(procfs_open_1): ... this. Add target_ops parameter. Adjust
comments. Can target_preopen before changing node. Call
inf_child_open_target to push the target explicitly.
(procfs_attach): Don't push the target if it is already pushed.
(procfs_detach): Use inf_child_maybe_unpush_target.
(procfs_create_inferior): Don't push the target if it is already
pushed.
(nto_native_ops): New global.
(procfs_open): Reimplement.
(procfs_native_open): New function.
(init_procfs_targets): Install procfs_native_open as to_open of
"target native". Store a pointer to the "native" target in
nto_native_ops.
* procfs.c (procfs_attach): Don't push the target if it is already
pushed.
(procfs_detach): Use inf_child_maybe_unpush_target.
(procfs_mourn_inferior): Only unpush the target after mourning the
inferior. Use inf_child_maybe_unpush_target.
(procfs_init_inferior): Don't push the target if it is already
pushed.
* windows-nat.c (do_initial_windows_stuff): Don't push the target
if it is already pushed.
(windows_detach): Use inf_child_maybe_unpush_target.
(windows_mourn_inferior): Only unpush the target after mourning
the inferior. Use inf_child_maybe_unpush_target.
gdb/doc/
2014-05-21 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Starting): Document "set/show
auto-connect-native-target".
(Target Commands): Document "target native".
gdb/testsuite/
2014-05-21 Pedro Alves <palves@redhat.com>
* boards/gdbserver-base.exp (GDBFLAGS): Set to "set
auto-connect-native-target off".
* gdb.base/auto-connect-native-target.c: New file.
* gdb.base/auto-connect-native-target.exp: New file.
To be like other native targets.
Leave to_shortname, to_longname, to_doc as inf-child.c sets them:
t->to_shortname = "native";
t->to_longname = "Native process";
t->to_doc = "Native process (started by the \"run\" command).";
gdb/
2014-05-21 Pedro Alves <palves@redhat.com>
* darwin-nat.c (_initialize_darwin_inferior): Don't override
to_shortname, to_longname or to_doc.
Due to a thinko, a message could be not understood and ignored. The result
was a dead-lock (gdb is waiting for an event that never happen). The port
of the thread was deallocated before new threads are discovered. As a
consequence, the origin of the message was unknown (instead of being
linked to the newly created thread).
gdb/
* darwin-nat.c (darwin_check_new_threads): Fix port leak, add
comments.
(darwin_decode_exception_message): Free port only after use.
it is possible that gdb gets mach exceptions from an unknown inferior. This
happens when an inferior creates a child and that child gets a signal.
So instead of reporting messages with unknown origins, simply reply to these
notifications. The kernel will then post the unix signal.
gdb/
* darwin-nat.c (darwin_encode_reply): Add prototype.
(darwin_decode_exception_message): Reply to unknown inferiors.
(darwin_decode_message): Handle message by id. Ignore message
to unknown inferior.
(darwin_wait): Discard unknown messages, add debug trace.
ps -e | grep a.out
28886 pts/12 00:00:00 a.out
gdb -p 28886
Loaded symbols for /lib64/ld-linux-x86-64.so.2
0x0000003b0ccbc970 in __nanosleep_nocancel () from /lib64/libc.so.6
../../binutils-gdb/gdb/cleanups.c:265: internal-warning: restore_my_cleanups has found a stale cleanup
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
The backtrace of this issue:
(gdb) bt
file=0x8b0c10 "s' failed.", line=265, fmt=0x8b0c38 "nutils-gdb/gdb/cleanups.c",
ap=0x7fff803e3ed8) at ../../binutils-gdb/gdb/utils.c:748
fmt=0x8b0c38 "nutils-gdb/gdb/cleanups.c", ap=0x7fff803e3ed8)
at ../../binutils-gdb/gdb/utils.c:799
string=0x8b0c38 "nutils-gdb/gdb/cleanups.c") at ../../binutils-gdb/gdb/utils.c:809
at ../../binutils-gdb/gdb/cleanups.c:265
at ../../binutils-gdb/gdb/cleanups.c:276
at ../../binutils-gdb/gdb/exceptions.c:142
at ../../binutils-gdb/gdb/exceptions.c:203
command=0x5d5fb8 <attach_command_continuation_free_args+18>, arg=0x7fff803e525b "2914",
from_tty=1, mask=RETURN_MASK_ALL) at ../../binutils-gdb/gdb/exceptions.c:549
---Type <return> to continue, or q <return> to quit---
func_args=0x7fff803e4280, errstring=0x8cf2e4 "/local/bin", mask=RETURN_MASK_ALL)
at ../../binutils-gdb/gdb/exceptions.c:522
This is a new issue. It is introduced by commit https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commit;h=8bc2fe488957946d2cdccda3ce8d4f39e4003ea0
It removed the discard_cleanups (back_to) inside attach_command.
Then restore_my_cleanups will throw a internal_warning.
https://sourceware.org/ml/gdb-patches/2014-03/msg00374.html
2014-03-21 Hui Zhu <hui@codesourcery.com>
Pedro Alves <palves@redhat.com>
* darwin-nat.c (darwin_pid_to_exec_file): Change xmalloc to
static buffer.
* fbsd-nat.c (fbsd_pid_to_exec_file): Ditto.
* linux-nat.c (linux_child_pid_to_exec_file): Ditto.
* nbsd-nat.c (nbsd_pid_to_exec_file): Ditto.
This patch does the conversion of to_xfer_partial from
LONGEST (*to_xfer_partial) (struct target_ops *ops,
enum target_object object, const char *annex,
gdb_byte *readbuf, const gdb_byte *writebuf,
ULONGEST offset, ULONGEST len);
to
enum target_xfer_status (*to_xfer_partial) (struct target_ops *ops,
enum target_object object, const char *annex,
gdb_byte *readbuf, const gdb_byte *writebuf,
ULONGEST offset, ULONGEST len, ULONGEST *xfered_len);
It changes to_xfer_partial return the transfer status and the transfered
length by *XFERED_LEN. Generally, the return status has three stats,
- TARGET_XFER_OK,
- TARGET_XFER_EOF,
- TARGET_XFER_E_XXXX,
See the comments to them in 'enum target_xfer_status'. Note that
Pedro suggested not name TARGET_XFER_DONE, as it is confusing,
compared with "TARGET_XFER_OK". We finally name it TARGET_XFER_EOF.
With this change, GDB core can handle unavailable data in a convenient
way.
The rationale behind this change was mentioned here
https://sourceware.org/ml/gdb-patches/2013-10/msg00761.html
Consider an object/value like this:
0 100 150 200 512
DDDDDDDDDDDxxxxxxxxxDDDDDD...DDIIIIIIIIIIII..III
where D is valid data, and xxx is unavailable data, and I is beyond
the end of the object (Invalid). Currently, if we start the
xfer at 0, requesting, say 512 bytes, we'll first get back 100 bytes.
The xfer machinery then retries fetching [100,512), and gets back
TARGET_XFER_E_UNAVAILABLE. That's sufficient when you're either
interested in either having the whole of the 512 bytes available,
or erroring out. But, in this scenario, we're interested in
the data at [150,512). The problem is that the last
TARGET_XFER_E_UNAVAILABLE gives us no indication where to
start the read next. We'd need something like:
get me [0,512) >>>
<<< here's [0,100), *xfered_len is 100, returns TARGET_XFER_OK
get me [100,512) >>> (**1)
<<< [100,150) is unavailable, *xfered_len is 50, return TARGET_XFER_E_UNAVAILABLE.
get me [150,512) >>>
<<< here's [150,200), *xfered_len is 50, return TARGET_XFER_OK.
get me [200,512) >>>
<<< no more data, return TARGET_XFER_EOF.
This naturally implies pushing down the decision of whether
to return TARGET_XFER_E_UNAVAILABLE or something else
down to the target. (Which kinds of leads back to tfile
itself reading from RO memory from file (though we could
export a function in exec.c for that that tfile delegates to,
instead of re-adding the old code).
Beside this change, we also add a macro TARGET_XFER_STATUS_ERROR_P to
check whether a status is an error or not, to stop using "status < 0".
This patch also eliminates the comparison between status and 0.
No target implementations to to_xfer_partial adapts this new
interface. The interface still behaves as before.
gdb:
2014-02-11 Yao Qi <yao@codesourcery.com>
* target.h (enum target_xfer_error): Rename to ...
(enum target_xfer_status): ... it. New. All users updated.
(enum target_xfer_status) <TARGET_XFER_OK>, <TARGET_XFER_EOF>:
New.
(TARGET_XFER_STATUS_ERROR_P): New macro.
(target_xfer_error_to_string): Remove declaration.
(target_xfer_status_to_string): Declare.
(target_xfer_partial_ftype): Adjust it.
(struct target_ops) <to_xfer_partial>: Return
target_xfer_status. Add argument xfered_len. Update
comments.
* target.c (target_xfer_error_to_string): Rename to ...
(target_xfer_status_to_string): ... it. New. All callers
updated.
(target_read_live_memory): Likewise. Call target_xfer_partial
instead of target_read.
(memory_xfer_live_readonly_partial): Return
target_xfer_status. Add argument xfered_len.
(raw_memory_xfer_partial): Likewise.
(memory_xfer_partial_1): Likewise.
(memory_xfer_partial): Likewise.
(target_xfer_partial): Likewise. Check *XFERED_LEN is set
properly. Update debug message.
(default_xfer_partial, current_xfer_partial): Likewise.
(target_write_partial): Likewise.
(target_read_partial): Likewise. All callers updated.
(read_whatever_is_readable): Likewise.
(target_write_with_progress): Likewise.
(target_read_alloc_1): Likewise.
* aix-thread.c (aix_thread_xfer_partial): Likewise.
* auxv.c (procfs_xfer_auxv): Likewise.
(ld_so_xfer_auxv, memory_xfer_auxv): Likewise.
* bfd-target.c (target_bfd_xfer_partial): Likewise.
* bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
* bsd-uthread.c (bsd_uthread_xfer_partia): Likewise.
* corefile.c (read_memory): Adjust.
* corelow.c (core_xfer_partial): Likewise.
* ctf.c (ctf_xfer_partial): Likewise.
* darwin-nat.c (darwin_read_dyld_info): Likewise. All callers
updated.
(darwin_xfer_partial): Likewise.
* exec.c (section_table_xfer_memory_partial): Likewise. All
callers updated.
(exec_xfer_partial): Likewise.
* exec.h (section_table_xfer_memory_partial): Update
declaration.
* gnu-nat.c (gnu_xfer_memory): Likewise. Assert 'res' is not
negative.
(gnu_xfer_partial): Likewise.
* ia64-hpux-nat.c (ia64_hpux_xfer_memory_no_bs): Likewise.
(ia64_hpux_xfer_memory, ia64_hpux_xfer_uregs): Likewise.
(ia64_hpux_xfer_solib_got): Likewise.
* inf-ptrace.c (inf_ptrace_xfer_partial): Likewise. Change
type of 'partial_len' to ULONGEST.
* inf-ttrace.c (inf_ttrace_xfer_partial): Likewise.
* linux-nat.c (linux_xfer_siginfo ): Likewise.
(linux_nat_xfer_partial): Likewise.
(linux_proc_xfer_partial, linux_xfer_partial): Likewise.
(linux_proc_xfer_spu, linux_nat_xfer_osdata): Likewise.
* monitor.c (monitor_xfer_memory): Likewise.
(monitor_xfer_partial): Likewise.
* procfs.c (procfs_xfer_partial): Likewise.
* record-btrace.c (record_btrace_xfer_partial): Likewise.
* record-full.c (record_full_xfer_partial): Likewise.
(record_full_core_xfer_partial): Likewise.
* remote-sim.c (gdbsim_xfer_memory): Likewise.
(gdbsim_xfer_partial): Likewise.
* remote.c (remote_write_bytes_aux): Likewise. All callers
updated.
(remote_write_bytes, remote_read_bytes): Likewise. All
callers updated.
(remote_flash_erase): Likewise. All callers updated.
(remote_write_qxfer): Likewise. All callers updated.
(remote_read_qxfer): Likewise. All callers updated.
(remote_xfer_partial): Likewise.
* rs6000-nat.c (rs6000_xfer_partial): Likewise.
(rs6000_xfer_shared_libraries): Likewise.
* sol-thread.c (sol_thread_xfer_partial): Likewise.
(sol_thread_xfer_partial): Likewise.
* sparc-nat.c (sparc_xfer_wcookie): Likewise.
(sparc_xfer_partial): Likewise.
* spu-linux-nat.c (spu_proc_xfer_spu): Likewise. All callers
updated.
(spu_xfer_partial): Likewise.
* spu-multiarch.c (spu_xfer_partial): Likewise.
* tracepoint.c (tfile_xfer_partial): Likewise.
* windows-nat.c (windows_xfer_memory): Likewise.
(windows_xfer_shared_libraries): Likewise.
(windows_xfer_partial): Likewise.
* valprint.c: Replace 'target_xfer_error' with
'target_xfer_status' in comments.
This patch is purely mechanical. It removes gdb_stat.h and changes
the code to use sys/stat.h.
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_stat.h: Remove.
* ada-lang.c: Use sys/stat.h, not gdb_stat.h.
* common/filestuff.c: Use sys/stat.h, not gdb_stat.h.
* common/linux-osdata.c: Use sys/stat.h, not gdb_stat.h.
* corefile.c: Use sys/stat.h, not gdb_stat.h.
* ctf.c: Use sys/stat.h, not gdb_stat.h.
* darwin-nat.c: Use sys/stat.h, not gdb_stat.h.
* dbxread.c: Use sys/stat.h, not gdb_stat.h.
* dwarf2read.c: Use sys/stat.h, not gdb_stat.h.
* exec.c: Use sys/stat.h, not gdb_stat.h.
* gdbserver/linux-low.c: Use sys/stat.h, not gdb_stat.h.
* gdbserver/remote-utils.c: Use sys/stat.h, not gdb_stat.h.
* inf-child.c: Use sys/stat.h, not gdb_stat.h.
* jit.c: Use sys/stat.h, not gdb_stat.h.
* linux-nat.c: Use sys/stat.h, not gdb_stat.h.
* m68klinux-nat.c: Use sys/stat.h, not gdb_stat.h.
* main.c: Use sys/stat.h, not gdb_stat.h.
* mdebugread.c: Use sys/stat.h, not gdb_stat.h.
* mi/mi-cmd-env.c: Use sys/stat.h, not gdb_stat.h.
* nto-tdep.c: Use sys/stat.h, not gdb_stat.h.
* objfiles.c: Use sys/stat.h, not gdb_stat.h.
* procfs.c: Use sys/stat.h, not gdb_stat.h.
* remote-fileio.c: Use sys/stat.h, not gdb_stat.h.
* remote-mips.c: Use sys/stat.h, not gdb_stat.h.
* remote.c: Use sys/stat.h, not gdb_stat.h.
* rs6000-nat.c: Use sys/stat.h, not gdb_stat.h.
* sol-thread.c: Use sys/stat.h, not gdb_stat.h.
* solib-spu.c: Use sys/stat.h, not gdb_stat.h.
* source.c: Use sys/stat.h, not gdb_stat.h.
* symfile.c: Use sys/stat.h, not gdb_stat.h.
* symmisc.c: Use sys/stat.h, not gdb_stat.h.
* symtab.c: Use sys/stat.h, not gdb_stat.h.
* top.c: Use sys/stat.h, not gdb_stat.h.
* xcoffread.c: Use sys/stat.h, not gdb_stat.h.
This patch constifies the target_ops method to_detach.
This is a small cleanup, but also, I think, a bug-prevention fix,
since gdb already acts as if the "args" argument here was const.
In particular, top.c:quit_force calls kill_or_detach via
iterate_over_inferiors. kill_or_detach calls target_detach, passing
the same argument each time. So, if one of these methods was not
const-correct, then kill_or_detach would change its behavior in a
strange way.
I could not build every target I modified in this patch. I've
inspected them all by hand, though. Many targets do not use the
"args" parameter; a couple pass it to atoi; and a few pass it on to
the to_detach method of the target beneath. The only code that
required a real change was in linux-nat.c, and that only needed the
introduction of a temporary variable for const-correctness.
2013-11-08 Tom Tromey <tromey@redhat.com>
* aix-thread.c (aix_thread_detach): Update.
* corelow.c (core_detach): Update.
* darwin-nat.c (darwin_detach): Update.
* dec-thread.c (dec_thread_detach): Update.
* gnu-nat.c (gnu_detach): Update.
* go32-nat.c (go32_detach): Update.
* inf-ptrace.c (inf_ptrace_detach): Update.
* inf-ttrace.c (inf_ttrace_detach): Update.
* linux-fork.c (linux_fork_detach): Update.
* linux-fork.h (linux_fork_detach): Update.
* linux-nat.c (linux_nat_detach): Update. Introduce "tem"
local for const-correctness.
* linux-thread-db.c (thread_db_detach): Update.
* monitor.c (monitor_detach): Update.
* nto-procfs.c (procfs_detach): Update.
* procfs.c (procfs_detach): Update.
* record.c (record_detach): Update.
* record.h (record_detach): Update.
* remote-m32r-sdi.c (m32r_detach): Update.
* remote-mips.c (mips_detach): Update.
* remote-sim.c (gdbsim_detach): Update.
* remote.c (remote_detach_1, remote_detach)
(extended_remote_detach): Update.
* sol-thread.c (sol_thread_detach): Update.
* target.c (target_detach): Make "args" const.
(init_dummy_target): Update.
* target.h (struct target_ops) <to_detach>: Make argument const.
(target_detach): Likewise.
* windows-nat.c (windows_detach): Update.
- The Mach exception/signals escaped the TARGET_ -> GDB_ prefix change
done a while ago, but there's no real reason for that. I grepped
for TARGET_EXC and fixed all found, which unsurprisingly, means
darwin-nat.c needed fixing. I think the change there is as obvious
and trivial as it can get, so I'd be quite surprised if this broke
anything there somehow.
- GDB_SIGNAL_LAST's description string was unnecessarily inconsistent
with the enum name.
Built on x86_64 Fedora 17.
gdb/
2013-10-22 Pedro Alves <palves@redhat.com>
* include/gdb/signals.def (TARGET_EXC_BAD_ACCESS): Rename to
GDB_EXC_BAD_ACCESS.
(TARGET_EXC_BAD_INSTRUCTION): Rename to GDB_EXC_BAD_INSTRUCTION.
(TARGET_EXC_ARITHMETIC): Rename to GDB_EXC_ARITHMETIC.
(TARGET_EXC_EMULATION): Rename to GDB_EXC_EMULATION.
(TARGET_EXC_SOFTWARE): Rename to GDB_EXC_SOFTWARE.
(TARGET_EXC_BREAKPOINT): Rename to GDB_EXC_BREAKPOINT.
(GDB_SIGNAL_LAST): Change description string.
* common/signals.c (gdb_signal_from_host, do_gdb_signal_to_host):
Adjust to signal renaming.
* darwin-nat.c (darwin_decode_message): Likewise.
darwin_xfer_partial already handles TARGET_OBJECT_MEMORY, so this
method is not necessary.
gdb/
2013-08-27 Pedro Alves <palves@redhat.com>
* darwin-nat.c (darwin_xfer_memory): Delete.
(_initialize_darwin_inferior): Don't install a
deprecated_xfer_memory method.
With the pathmax gnulib module in place, we can use PATH_MAX
consistently throughout, instead of the current mixbag of PATH_MAX and
MAXPATHLEN uses. It's no longer necessary to include sys/param.h
(supposedly, I can't check all ports touched here) for MAXPATHLEN.
Don't remove sys/param.h from GDB's configure.ac, as later tests in
the file use HAVE_SYS_PARAM_H checks.
Tested on x86_64 Fedora 17.
Also cross-built for --host=i686-w64-mingw32, and --host=i586-pc-msdosdjgpp.
gdb/
2013-07-01 Pedro Alves <palves@redhat.com>
* defs.h: Include "pathmax.h".
* utils.c: Don't include sys/param.h.
(gdb_realpath): Remove code that checks for MAXPATHLEN.
* solib-ia64-hpux.c (ia64_hpux_handle_load_event): Use PATH_MAX
instead of MAXPATHLEN.
* solib-sunos.c: Don't include sys/param.h.
* xcoffread.c: Don't include sys/param.h.
* bsd-kvm.c: Don't include sys/param.h.
* darwin-nat.c: Don't include sys/param.h.
(darwin_pid_to_exec_file): Use PATH_MAX instead of MAXPATHLEN.
* darwin-nat-info.c: Don't include sys/param.h.
* fbsd-nat.c (fbsd_pid_to_exec_file): Use PATH_MAX instead of
MAXPATHLEN.
* i386obsd-nat.c: Don't include sys/param.h.
* inf-child.c: Don't include sys/param.h.
(inf_child_fileio_readlink): Use PATH_MAX instead of MAXPATHLEN.
* linux-fork.c: Don't include sys/param.h.
(fork_save_infrun_state): Use PATH_MAX instead of MAXPATHLEN.
* linux-nat.c: Don't include sys/param.h.
(linux_child_pid_to_exec_file, linux_proc_pending_signals)
(linux_proc_pending_signals): Use PATH_MAX instead of MAXPATHLEN.
* m68klinux-nat.c: Don't include sys/param.h.
* nbsd-nat.c: Don't include sys/param.h.
(nbsd_pid_to_exec_file): Use PATH_MAX instead of MAXPATHLEN.
* ppc-linux-nat.c: Don't include sys/param.h.
* rs6000-nat.c: Don't include sys/param.h.
* spu-linux-nat.c. Don't include sys/param.h.
* windows-nat.c: Don't include sys/param.h.
* xtensa-linux-nat.c: Don't include sys/param.h.
* config/i386/nm-fbsd.h: Don't include sys/param.h.
gdb/gdbserver/
2013-07-01 Pedro Alves <palves@redhat.com>
* server.h: Include "pathmax.h".
* linux-low.c: Don't include sys/param.h.
(linux_pid_exe_is_elf_64_file): Use PATH_MAX instead of
MAXPATHLEN.
* win32-low.c: Don't include sys/param.h.
(win32_create_inferior): Use PATH_MAX instead of MAXPATHLEN.
Tom Tromey <tromey@redhat.com>
* common/filestuff.c (mark_fd_no_cloexec, unmark_fd_no_cloexec):
New functions.
* common/filestuff.c (mark_fd_no_cloexec, unmark_fd_no_cloexec):
Declare.
* darwin-nat.c (darwin_pre_ptrace): Use mark_fd_no_cloexec.
(darwin_ptrace_him): Use unmark_fd_no_cloexec.
* inf-ttrace.c (do_cleanup_pfds): Use unmark_fd_no_cloexec.
(inf_ttrace_prepare): Use mark_fd_no_cloexec.
This patch avoids a warning when resuming the execution of a program
that we attached to. For instance:
(gdb) attach 29989
(gdb) continue
Continuing.
warning: Mach error at "/[...]/darwin-nat.c:738" in function
"darwin_resume_thread": (os/kern) failure (0x5)
The warning is relatively harmless, but worrisome for the average
user. The warning comes from the fact that darwin_wait recorded
that the fake stop event corresponding to the suspend action was
caused by the main thread being suspended on a SIGTRAP. As a result
of this, when resuming the program's execution, we try to resume
the thread's execution as well. This is where the issue occurs,
as the thread was not in fact suspended, thus triggering the warning.
gdb/ChangeLog:
* darwin-nat.c (darwin_setup_fake_stop_event): New function.
(darwin_attach): Adjust using darwin_setup_fake_stop_event.
Sergio Durigan Junior
Pedro Alves
Joel Brobecker
Tristan Gingold
Tristan Gingold
James Clarke
Simon Marchi
Gary Benson
Tom Tromey
Hui Zhu
Stan Shebs
Yao Qi
Markus Metzger
Joel Brobecker