PR 17940
* dwarf2dbg.c (out_header): When generating dwarf sections use
real symbols not temps for the start and end symbols.
* config/tc-msp430.h (TC_FORCE_RELOCATION_SUB_SAME): Also prevent
adjustments to relocations in debug sections.
(TC_LINKRELAX_FIXUP): Likewise.
* elf32-msp430.c (msp430_elf_relax_delete_bytes): Adjust debug
symbols at end of sections. Adjust function sizes.
The IBM z13 has new 128-bit wide vector registers v0-v31, where v0-v15
include the existing 64-bit wide floating point registers. The Linux
kernel presents the vector registers as two additional register sets,
one for the right halves of v0-v15 and another one for the full
registers v16-v31. Thus a new core file may contain two new register
note sections, and this patch adds support to binutils for them.
bfd/
* elf-bfd.h (elfcore_write_s390_vxrs_low): Add prototype.
(elfcore_write_s390_vxrs_high): Likewise.
* elf.c (elfcore_grok_s390_vxrs_low): New function.
(elfcore_grok_s390_vxrs_high): New function.
(elfcore_grok_note): Call them.
(elfcore_write_s390_vxrs_low): New function.
(elfcore_write_s390_vxrs_high): New function.
(elfcore_write_register_note): Call them.
binutils/
* readelf.c (get_note_type): Add NT_S390_VXRS_LOW and
NT_S390_VXRS_HIGH.
include/elf/
* common.h (NT_S390_VXRS_LOW): New macro.
(NT_S390_VXRS_HIGH): Likewise.
I was having a little closer look at what is going on here and noticed
that HJ unconditionally emits a NULL STT_FILE symbol before emitting
forced local symbols. That means we really don't need a second pass
over forced local symbols. The only reason for two passes is when
some forced local symbol can be emitted before the NULL STT_FILE. So
I set about removing the second pass, updating the testsuite all over
again. It's also unnecessary to emit the NULL STT_FILE when no
previous file symbol has been emitted.
bfd/
PR ld/17975
* elflink.c (struct elf_outext_info): Remove need_second_pass
and second_pass.
(elf_link_output_extsym): Delete code handling second forced
local pass. Move code emitting NULL STT_FILE symbol later, so
that it can be omitted if forced local is stripped. Don't
emit the NULL STT_FILE if no file symbols have been output.
(bfd_elf_final_link): Remove second forced local pass.
* elf32-ppc.c (add_stub_sym): Set linker_def on linker syms.
(ppc_elf_size_dynamic_sections): Likewise.
* elf64-ppc.c (ppc_build_one_stub): Likewise.
(build_global_entry_stubs): Likewise.
(ppc64_elf_build_stubs): Likewise.
ld/testsuite/
PR ld/17975
* ld-aarch64/gc-tls-relocs.d, * ld-alpha/tlspic.rd,
* ld-cris/libdso-2.d, * ld-i386/tlsdesc-nacl.rd, * ld-i386/tlsdesc.rd,
* ld-i386/tlsnopic-nacl.rd, * ld-i386/tlsnopic.rd,
* ld-i386/tlspic-nacl.rd, * ld-i386/tlspic.rd, * ld-ia64/tlspic.rd,
* ld-powerpc/tlsexe.r, * ld-powerpc/tlsexetoc.r,
* ld-powerpc/tlsso.r, * ld-powerpc/tlstocso.r,
* ld-s390/tlspic.rd, * ld-s390/tlspic_64.rd,
* ld-sparc/tlssunnopic32.rd, * ld-sparc/tlssunnopic64.rd,
* ld-sparc/tlssunpic32.rd, * ld-sparc/tlssunpic64.rd,
* ld-tic6x/shlib-1.rd, * ld-tic6x/shlib-1b.rd, * ld-tic6x/shlib-1r.rd,
* ld-tic6x/shlib-1rb.rd, * ld-tic6x/shlib-noindex.rd,
* ld-x86-64/tlsdesc-nacl.rd, * ld-x86-64/tlsdesc.rd,
* ld-x86-64/tlspic-nacl.rd, * ld-x86-64/tlspic.rd: Update.
LTO output objects have an STT_FILE symbol using the name of the file,
a temporary file. This results in executables that can't be exactly
reproduced, so the file name needs to be dropped. We don't want to
lose all file symbols when linking a mix of lto and non-lto objects as
a file symbol can be used to figure which source file generated a
given local symbol. So lto output objects need to be marked.
I chose to mark lto output objects with a new bfd flag. This flag is
also used to fix a bug in the link-once handling; An object being
loaded after "loading_lto_outputs" is set might be one extracted from
an archive to satisfy new references from lto objects, not an lto
object itself.
The new flag is copied from archive to elements, and the same done
for no_export. This fixes a bug in that --exclude-libs doesn't work
with thin archives. I'm not completely happy with this part of the
patch and may revist this to avoid the hack in
_bfd_look_for_bfd_in_cache.
PR ld/17973
include/
* bfdlink.h (struct bfd_link_info): Delete loading_lto_outputs.
bfd/
* bfd.c (struct bfd): Add lto_output.
* linker.c (_bfd_handle_already_linked): Explicitly test for
objects added by the lto plugin.
* opncls.c (_bfd_new_bfd_contained_in): Copy lto_output and
no_export flags from archive.
* archive.c (open_nested_file): New function, setting lto_output
and no_export, extracted from..
(find_nested_archive): ..here. Flip params. Rename from
_bfd_find_nested_archive.
(_bfd_get_elt_at_filepos): Correct var typo. Use open_nested_file.
(_bfd_look_for_bfd_in_cache): Copy no_export.
* elflink.c (elf_link_add_object_symbols): Remove now unnecessary
my_archive->no_export test.
(elf_link_input_bfd): Drop existing lto_output STT_FILE syms.
Don't use the file name when adding lto_output STT_FILE sym.
* bfd-in2.h: Regenerate.
ld/
* ldlang.h (struct lang_input_statement_flags): Add lto_output.
* ldlang.c (lang_process): Don't set loading_lto_outputs.
* ldfile.c (ldfile_try_open_bfd): Transfer entry flags.lto_output
to bfd.
* plugin.c (add_input_file, add_input_library): Set flags.lto_output.
PR binutils/17512
* dwarf.c (read_1_byte, read_1_signed_byte, read_2_bytes)
(read_4_bytes, read_8_bytes, read_n_bytes, read_string)
(read_indirect_string, read_alt_indirect_string)
(read_alt_indirect_ref, read_address, read_abbrevs)
(read_attribute_value, read_attribute, decode_line_info)
(find_abstract_instance_name, read_rangelist)
(scan_unit_for_symbols, parse_comp_unit)
(_bfd_dwarf2_find_nearest_line): Harden DWARF reading code. Pass
end pointers to reading functions and check for offsets taking
pointers out of range. Replace calls to read_*_leb128 with calls
to safe_read_leb128.
(* elf64-ppc.c (opd_entry_value): Add a check for an overlarge
offset.
* syms.c (_bfd_stab_section_find_nearest_line): Add checks for
computed file_name address being before the start of the string
table.
These were the BFD changes needed for building a C++ GDB with
--enable-targets=all, on x86_64 Fedora 20.
For libbfd.h and libcoff.h, this does same as already done when
generating bfd.h: open extern "C" in the -in.h header, and close it
from the Makefile.
bfd/doc/ChangeLog:
2015-02-11 Pedro Alves <palves@redhat.com>
* Makefile.am (libbfd.h, libcoff.h): Close extern "C" scope.
* Makefile.in: Regenerate.
bfd/ChangeLog:
2015-02-11 Pedro Alves <palves@redhat.com>
* libbfd-in.h [__cplusplus]: Open extern "C" scope.
* libcoff-in.h [__cplusplus]: Open extern "C" scope.
* libbfd.h: Regenerate.
* libcoff.h: Regenerate.
* elf-bfd.h [__cplusplus]: Wrap in extern "C".
* mach-o.h [__cplusplus]: Wrap in extern "C".
* som.h [__cplusplus]: Wrap in extern "C".
PR binutils/17512
* dwarf.c (eh_addr_size): Use an unsigned type.
(size_of_encoded_value): Return an unsigned type.
(read_leb128): Break if the shift becomes too big.
(process_extended_line_op): Do not read the address if the length
is too long.
(read_cie): Warn and fail if the pointer size or segment size are
too big.
* dwarf.h (DWARF2_External_LineInfo): Delete unused and incorrect
structure definition.
(DWARF2_External_PubNames): Likewise.
(DWARF2_External_CompUnit): Likewise.
(DWARF2_External_ARange): Likewise.
(DWARF2_Internal_LineInfo): Use dwarf_vma type for
li_prologue_length.
(eh_addr_size): Update prototype.
* coffcode.h (styp_to_sec_flags): Use an unsigned long type to
hold the flag bits.
* peXXigen.c (pe_print_reloc): Use unsigned types to hold the
size and number of relocs.
(pe_print_debugdata): Use a 32-bit aligned buffer to store the
codeview record.
* versados.c (process_otr): Check the esdid value before using it
to access the EDATA.
Real code won't hit these, but it's possible to contrive a testcase..
* elf32-ppc.c (ppc_elf_relocate_section): Don't segfault on NULL
tls_sec.
* elf64-ppc.c (ppc64_elf_relocate_section): Likewise.
* elflink.c (elf_link_output_extsym): Don't assert on NULL tls_sec.
* elflink.c: Whitespace, formatting fixes.
(elf_link_input_bfd): Clarify comment.
(elf_link_output_extsym): Exclude symbols in linker created
sections when testing for plugin symbols.
Mark the unused plugin defined symbol in elf_link_input_bfd instead of
_bfd_elf_fix_symbol_flags. Limit the PR ld/12365 test to x86 targets.
bfd/
PR ld/12365
PR ld/14272
* elflink.c (_bfd_elf_fix_symbol_flags): Revert the last change.
(elf_link_input_bfd): Mark the plugin symbol undefined if it is
referenced from a non-IR file.
ld/testsuite/
PR ld/12365
PR ld/14272
* ld-plugin/lto.exp: Run the PR ld/12365 test only for x86 targets.
* ld-plugin/plugin-7.d: Updated.
* ld-plugin/plugin-8.d: Likewise.
PR binutils/17512
* dwarf.c (display_debug_frames): Fix range checks to work on
32-bit binaries complied on a 64-bit host.
* peXXigen.c (rsrc_print_resource_entries): Add range check for
addresses that wrap around the address space.
(rsrc_parse_entry): Likewise.
LTO may optimize out a plugin symbol, which is also referenced by a
non-IR file. When that happens, we should mark the plugin symbol
undefined. It isn't the problem since LTO already determined the
symbols in the non-IR file aren't used.
bfd/
PR ld/12365
PR ld/14272
* elflink.c (_bfd_elf_fix_symbol_flags): Mark the plugin symbol
undefined if it is referenced from a non-IR file.
ld/testsuite/
PR ld/12365
* ld-plugin/pr12365a.c: New file.
* ld-plugin/pr12365b.c: Likewise.
* ld-plugin/pr12365c.c: Likewise.
* ld-plugin/lto.exp (lto_link_tests): Prepare for the PR ld/12365
test.
Run the PR ld/12365 test.
Unless pointer_equality_needed is set then set st_value to be zero
for undefined symbols.
bfd/ChangeLog:
2015-02-03 Will Newton <will.newton@linaro.org>
* elfnn-aarch64.c (elfNN_aarch64_finish_dynamic_symbol):
Set st_value to zero for undefined symbols if the reference
is weak or pointer_equality_needed is FALSE.
Improve the comment discussing why we clear st_value for some
symbols.
bfd/ChangeLog:
2015-02-03 Will Newton <will.newton@linaro.org>
* elf32-arm.c (elf32_arm_finish_dynamic_symbol): Improve
comment discussing why we clear st_value for some symbols.
The linker hardcoded r3 into a local-dynamic to local-exec TLS
optimization sequence. This is normally the case since r3 is required
as a parameter to (the optimized out) __tls_get_addr call. However,
it is possible for a compiler, LLVM in this case, to set up the
parameter value in another register then copy it to r3 before the
call.
When fixing this problem, I noticed that ppc32 had another bug when
optimizing away one of the TLS insns to a nop.
The patch also tidies a mask used by global-dynamic to initial-exec
TLS optimization, to just select the fields needed. Leaving the
offset in the instruction wasn't a bug since it will be overwritten
anyway.
bfd/
* elf64-ppc.c (ppc64_elf_relocate_section): Correct GOT_TLSLD
optimization. Tidy mask for GOT_TLSGD optimization.
* elf32-ppc.c (ppc_elf_relocate_section): Likewise. Correct
location of nop zapping high insn too.
ld/testsuite/
* ld-powerpc/tlsld.d, * ld-powerpc/tlsld.s: New test.
* ld-powerpc/tlsld32.d, * ld-powerpc/tlsld32.s: New test.
* ld-powerpc/powerpc.exp: Run them. Move tocvar and tocnovar.
The changes to reorder sections for better relro protection on powerpc64,
3e2b0f31, 23283c1b, and 5ad18f16, run into a problem with xlc.
xlc -qdatalocal puts global variables into .toc, which means that .toc
must be writable. The simplest way to accomplish this is to edit the
linker script to remove .toc sections from .got on detecting xlc object
files.
bfd/
* elf64-ppc.h (struct ppc64_elf_params): Add "object_in_toc".
* elf64-ppc.c (ppc64_elf_add_symbol_hook): Assume that global symbols
in .toc indicate xlc compiled code that might require a rw .toc.
ld/
* emulparams/elf64ppc.sh (INITIAL_READWRITE_SECTIONS): Define.
* emultempl/ppc64elf.em (params): Init new field.
(ppc_after_open): New function.
(LDEMUL_AFTER_OPEN): Define.
* ldlang.c (lang_final): Whitespace fix.
ld/testsuite/
* ld-powerpc/tocvar.d, * ld-powerpc/tocvar.s: New test.
* ld-powerpc/tocnovar.d, * ld-powerpc/tocnovar.s: New test.
* ld-powerpc/powerpc.exp: Run tocvar and tocnovar.
PR binutils/17512
* addr2line.c (slurp_symtab): If the symcount is zero, free the
symbol table pointer.
* dwarf2.c (concat_filename): Check for an empty directory table.
(scan_unit_for_symbols): Check for reading off the end of the
unit.
(parse_comp_unit): Check for a DW_AT_comp_dir attribute with a
non-string form.
* elf64-ppc.c (opd_entry_value): Fail if there are no relocs
available.
PR binutils/17512
* dlltool.c (identify_search_archive): If the last archive was the
same as the current archive, terminate the loop.
* pdp11.c (aout_get_external_symbols): Return false if there are
no symbols.
2015-01-22 DJ Delorie <dj@redhat.com>
* elf32-m32c.c (m32c_apply_reloc_24): New.
(m32c_elf_howto_table): Use it for R_M32C_24.
(m32c_elf_relocate_section): Handle R_M32C_24 specially.
PR binutils/17512
* coffcode.h (handle_COMDAT): When searching for the section
symbol, make sure that there is space left in the symbol table.
* vms-alpha.c (_bfd_vms_slurp_ehdr): Add range checks.
PR binutils/17512
* coffcode.h (coff_set_arch_mach_hook): Check return value from
bfd_malloc.
(coff_slurp_line_table): Return FALSE if the line number
information was corrupt.
(coff_slurp_symbol_table): Return FALSE if the symbol information
was corrupt.
* mach-o.c (bfd_mach_o_bfd_copy_private_header_data): Always
initialise the fields of the dyld_info structure.
(bfd_mach_o_build_exec_seg_command): Replace assertion with an
error message and a return value.
(bfd_mach_o_layout_commands): Change the function to boolean.
Return FALSE if the function fails.
(bfd_mach_o_build_commands): Fail if bfd_mach_o_layout_commands
fails.
(bfd_mach_o_read_command): Fail if an unrecognised command is
encountered.
* peXXigen.c (_bfd_XXi_swap_aouthdr_in): Set bfd_error if the
read fails.
(slurp_symtab): Check the return from bfd_malloc.
(_bfd_XX_bfd_copy_private_bfd_data_common): Fail if the copy
encountered an error.
(_bfd_XXi_final_link_postscript): Fail if a section could not be
copied.
* peicode.h (pe_bfd_object_p): Fail if the header could not be
swapped in.
* tekhex.c (first_phase): Fail if the section is too big.
* versados.c (struct esdid): Add content_size field.
(process_otr): Use and check the new field.
(versados_get_section_contents): Check that the section exists and
that the requested data is available.
PR binutils/17512
* addr2line.c (main): Call bfd_set_error_program_name.
* ar.c (main): Likewise.
* coffdump.c (main): Likewise.
* cxxfilt.c (main): Likewise.
* dlltool.c (main): Likewise.
* nlmconv.c (main): Likewise.
* nm.c (main): Likewise.
* objdump.c (main): Likewise.
* size.c (main): Likewise.
* srconv.c (main): Likewise.
* strings.c (main): Likewise.
* sysdump.c (main): Likewise.
* windmc.c (main): Likewise.
* windres.c (main): Likewise.
* objcopy.c (main): Likewise.
(copy_relocations_in_section): Check for relocs without associated
symbol pointers.
Running lang_common before garbage collection means slightly less work
in garbage collection code, since common symbols should no longer
appear there. It does have the side effect of keeping linker script
symbols (at least those defined outside of sections) global too,
hence some testsuite churn.
bfd/
PR 17165
* elf-bfd.h (ELF_COMMON_DEF): Note that this might be true for
linker script assignments too.
* elflink.c (elf_gc_sweep_symbol): Don't drop ELF_COMMON_DEF syms.
(bfd_elf_gc_mark_dynamic_ref_symbol): Similarly.
ld/
PR 17165
* ldlang.c (lang_process): Run lang_common before lang_gc_sections.
ld/testsuite/
* ld-gc/pr14265.d,
* ld-cris/tls-gc-68.d,
* ld-cris/tls-gc-69.d,
* ld-cris/tls-gc-70.d,
* ld-cris/tls-gc-71.d,
* ld-cris/tls-gc-75.d,
* ld-cris/tls-gc-76.d,
* ld-cris/tls-gc-79.d,
* ld-mmix/bpo-10.d,
* ld-mmix/bpo-11.d: Update.
When building executable, undefined symbol is a fatal error. We don't
complain about -fPIC if the symbol is undefined.
bfd/
PR ld/17847
* elf64-x86-64.c (elf_x86_64_relocate_section): Don't complain
about -fPIC if the symbol is undefined when building executable.
ld/testsuite/
PR ld/17847
* ld-x86-64/pie1.d: New file.
* ld-x86-64/pie1.s: Likwise.
* ld-x86-64/x86-64.exp: Run pie1.
This is a simplification, and fixes a testcase I had where an empty
powerpc64 .branch_lt section was chosen for the data_index_section
dynamic symbol and thus wasn't removed.
* elflink.c (_bfd_elf_link_omit_section_dynsym): Return true for
any output section matching a linker created dynobj section.
ld-elf/gap test was failing due to the ARM backend attempting to output
arch symbols when ld -s (strip all symbols) is in force. This patch
stops that happening and tidies the code a little.
PR 17842
* elflink.c (elf_link_output_sym): Assert elf_onesymtab set.
(bfd_elf_final_link): Always create a symbol table when emit_relocs.
Don't assign symtab file position unless symbols will be output.
Merge blocks with condition in common. Don't call
elf_backend_output_arch_local_syms or elf_backend_output_arch_syms
unless other symbols are output. Move assignment of symtab_shndx
file position. Localize variable.
bfd/ChangeLog
2015-01-13 Thomas Preud'homme <thomas.preudhomme@arm.com>
* elfnn-aarch64.c (elfNN_aarch64_final_link_relocate): Use
SYMBOLIC_BIND to check if a symbol should be bound symbolically.
ld/testsuite/ChangeLog
2015-01-13 Thomas Preud'homme <thomas.preudhomme@arm.com>
* ld-aarch64/aarch64-elf.exp: Added relocs-257-symbolic-func test.
* ld-aarch64/relocs-257-symbolic-func.d: New file.
* ld-aarch64/relocs-257-symbolic-func.s: Likewise.
Yoshinori Sato
Nick Clifton
Andreas Arnez
Branko Drevensek
Alan Modra
H.J. Lu
Pedro Alves
Ed Maste
Will Newton
Kuan-Lin Chen
DJ Delorie
Chung-Lin Tang
Jiong Wang