Joel Brobecker
1ca8fce046
Unused function in procfs.c on alpha-tru64.
...
The procfs_address_to_host_pointer function was not used outside of
alpha-tru64, and thus was triggering a compiler warning. Adjusted
accordingly.
gdb/ChangeLog:
* procfs.c (procfs_address_to_host_pointer): Only define when used.
2010-04-20 22:36:35 +00:00
Joel Brobecker
e9ef4f394d
procfs.c: iterate_over_mappings callback has wrong profile.
...
The function proc_find_memory_regions calls iterate_over_mappings as
follow:
> return iterate_over_mappings (pi, func, data,
> find_memory_regions_callback);
The problem is that both func and find_memory_regions_callback
do not match the profile expected by iterate_over_mappings:
> iterate_over_mappings (procinfo *pi, int (*child_func) (), void *data,
> int (*func) (struct prmap *map,
> int (*child_func) (),
> void *data))
We cannot change proc_find_memory_regions such that FUNC is a pointer
to a function that takes no argument (in place of the 6 that it has).
This is because proc_find_memory_regions is used as a target_ops method.
However, it turns out that changing iterate_over_mappings to conform
to the profile imposed by the target_ops vector is possible without
much effort.
gdb/ChangeLog:
* procfs.c (iterate_over_mappings_cb_ftype): New typedef.
(iterate_over_mappings): Adjust function profile. Add declaration.
(insert_dbx_link_bpt_in_region, info_mappings_callback):
Adjust accordingly.
2010-04-20 22:35:58 +00:00
Joel Brobecker
e294797a88
procfs.c: Move solib_mappings_callback up to avoid compiler warning.
...
There are currently 2 issues with the placement of this routine:
- It's defined after it is being used (causing an implicit declaration);
- It looks like it's being defined all the time, whereas it is used
only on mips-irix (AFAICT) - shouldn't have this triggered a warning
on sparc-solaris, for instance???
In any case, this patch moves this function up, inside the right region,
just before the function where it is actually used.
gdb/ChangeLog:
* procfs.c (solib_mappings_callback): Move function up to avoid
a compiler warning.
2010-04-20 22:35:03 +00:00
Joel Brobecker
a223f1e7a0
procfs.c: Move find_signalled_thread and find_stop_signal.
...
These two functions are only used from procfs_make_note_section, which
itself is only defined if:
#if defined (UNIXWARE) || defined (PIOCOPENLWP) || defined (PCAGENT)
So these two functions are unused on mips-irix, and they get flagged
by -Wunused-function. This patch simply moves these functions closer
to the function that uses them, which also has the effect of putting
them inside the same #if block as procfs_make_note_section. Thus
they are defined only when used.
gdb/ChangeLog:
* procfs.c (find_signalled_thread, find_stop_signal): Move
these functions down to define them only when used.
2010-04-20 22:34:09 +00:00
Jan Kratochvil
74164c5624
gdb/
...
* defs.h (parse_pid_to_attach): New.
* utils.c (parse_pid_to_attach): New.
* darwin-nat.c (darwin_attach): Replace ARGS parsing by parse_pid.
* gnu-nat.c (gnu_attach): Likewise.
* nto-procfs.c (procfs_attach): Likewise.
* procfs.c (procfs_attach): Likewise.
* windows-nat.c (windows_attach): Likewise.
* inf-ptrace.c (inf_ptrace_attach): Likewise. Remove variable dummy.
* inf-ttrace.c (inf_ttrace_attach): Likewise.
* remote.c (extended_remote_attach_1): Likewise. New comment on getpid
check.
gdb/testsuite/
* gdb.base/attach.exp (attach to nonsense is prohibited): Make the
"Illegal process-id" expect string more exact.
(attach to digits-starting nonsense is prohibited): New.
2010-02-15 17:35:50 +00:00
Joel Brobecker
7434dadd5d
Another -Wunused-function error in procfs.c (sparc-solaris)
...
* procfs.c (insert_dbx_link_breakpoint): Delete declaration. Move up.
Only define if SYS_syssgi is defined.
(remove_dbx_link_breakpoint): Delete declaration. Move up.
(dbx_link_addr, insert_dbx_link_bpt_in_file)
(insert_dbx_link_bpt_in_region): Move up. Only define if SYS_syssgi
is itself defined.
2010-01-28 08:19:29 +00:00
Jan Kratochvil
9f2982ff0b
gdb/
...
Support Valgrind attachments broken by the PIE support.
* auxv.c: Include gdbcore.h.
(procfs_xfer_auxv): Make static. Reduce its comment. Drop its
parameters ops, object and annex. Remove their assertions.
(ld_so_xfer_auxv, memory_xfer_auxv): New function.
* auxv.h (procfs_xfer_auxv): Remove comment. Rename to ...
(memory_xfer_auxv): ... here.
* linux-nat.c (linux_xfer_partial): Rename procfs_xfer_auxv to
memory_xfer_auxv.
* procfs.c (procfs_xfer_partial): Likewise.
* solib-svr4.c (svr4_relocate_main_executable): New prototype.
(svr4_special_symbol_handling): Call svr4_relocate_main_executable.
(svr4_solib_create_inferior_hook): Conditionalize the
svr4_relocate_main_executable call.
gdb/testsuite/
* gdb.base/valgrind-db-attach.exp, gdb.base/valgrind-db-attach.c: New.
2010-01-14 21:15:00 +00:00
Joel Brobecker
27087a3dc2
Breakpoint in shared library does not work on mips-irix.
...
* procfs.c: #include "observer.h".
(procfs_inferior_created): New function, moving here the code
which unsets the syssgi syscall-exit notifications.
(procfs_create_inferior): Remove the code which unsets the syssgi
syscall-exit notifications. It is too early to do this here.
(_initialize_procfs): Attach the procfs_inferior_created observer.
2010-01-09 04:44:02 +00:00
Joel Brobecker
3c95f01cee
-Wunused warning in procfs.c (mips-irix only).
...
* procfs.c (gdb_praddset, gdb_prdelset): New macros. Use them
throughout instead of using praddset and prdelset respectively.
2010-01-09 04:37:12 +00:00
Joel Brobecker
4c49065043
* procfs.c: (procfs_do_thread_registers) Use elfcore_write_lwpstatus.
2010-01-09 04:32:52 +00:00
Joel Brobecker
4c38e0a4fc
Update copyright year in most headers.
...
Automatic update by copyright.sh.
2010-01-01 07:32:07 +00:00
Daniel Jacobowitz
751254059d
2009-11-10 Daniel Gutson <dgutson@codesourcery.com>
...
* procfs.c (procfs_do_thread_registers): Added a call to fetch
register values before saving them in the core file
through the gcore command.
(procfs_corefile_thread_callback): Removed the backup of
inferior_ptid before calling procfs_do_thread_registers since
the function already saves and restores it before returning.
2009-11-10 21:00:41 +00:00
Pierre Muller
47607d6f7c
* rs6000-nat.c (exec_one_dummy_insn): Add missing new ASPACE parameter
...
to depreacted_insert_raw_breakpoint function call.
* procfs.c (insert_dbx_link_bpt_in_file): Likewise.
2009-10-21 08:27:25 +00:00
Pedro Alves
6c95b8df7f
2009-10-19 Pedro Alves <pedro@codesourcery.com>
...
Stan Shebs <stan@codesourcery.com>
Add base multi-executable/process support to GDB.
gdb/
* Makefile.in (SFILES): Add progspace.c.
(COMMON_OBS): Add progspace.o.
* progspace.h: New.
* progspace.c: New.
* breakpoint.h (struct bp_target_info) <placed_address_space>: New
field.
(struct bp_location) <pspace>: New field.
(struct breakpoint) <pspace>: New field.
(bpstat_stop_status, breakpoint_here_p)
(moribund_breakpoint_here_p, breakpoint_inserted_here_p)
(regular_breakpoint_inserted_here_p)
(software_breakpoint_inserted_here_p, breakpoint_thread_match)
(set_default_breakpoint): Adjust prototypes.
(remove_breakpoints_pid, breakpoint_program_space_exit): Declare.
(insert_single_step_breakpoint, deprecated_insert_raw_breakpoint):
Adjust prototypes.
* breakpoint.c (executing_startup): Delete.
(default_breakpoint_sspace): New.
(breakpoint_restore_shadows): Skip if the address space doesn't
match.
(update_watchpoint): Record the frame's program space in the
breakpoint location.
(insert_bp_location): Record the address space in target_info.
Adjust to pass the symbol space to solib_name_from_address.
(breakpoint_program_space_exit): New.
(insert_breakpoint_locations): Switch the symbol space and thread
when inserting breakpoints. Don't insert breakpoints in a vfork
parent waiting for vfork done if we're not attached to the vfork
child.
(remove_breakpoints_pid): New.
(reattach_breakpoints): Switch to a thread of PID. Ignore
breakpoints of other symbol spaces.
(create_internal_breakpoint): Store the symbol space in the sal.
(create_longjmp_master_breakpoint): Iterate over all symbol
spaces.
(update_breakpoints_after_exec): Ignore breakpoints for other
symbol spaces.
(remove_breakpoint): Rename to ...
(remove_breakpoint_1): ... this. Pass the breakpoints symbol
space to solib_name_from_address.
(remove_breakpoint): New.
(mark_breakpoints_out): Ignore breakpoints from other symbol
spaces.
(breakpoint_init_inferior): Ditto.
(breakpoint_here_p): Add an address space argument and adjust to
use breakpoint_address_match.
(moribund_breakpoint_here_p): Ditto.
(regular_breakpoint_inserted_here_p): Ditto.
(breakpoint_inserted_here_p): Ditto.
(software_breakpoint_inserted_here_p): Ditto.
(breakpoint_thread_match): Ditto.
(bpstat_check_location): Ditto.
(bpstat_stop_status): Ditto.
(print_breakpoint_location): If there's a location to print,
switch the current symbol space.
(print_one_breakpoint_location): Add `allflag' argument.
(print_one_breakpoint): Ditto. Adjust.
(do_captured_breakpoint_query): Adjust.
(breakpoint_1): Adjust.
(breakpoint_has_pc): Also match the symbol space.
(describe_other_breakpoints): Add a symbol space argument and
adjust.
(set_default_breakpoint): Add a symbol space argument. Set
default_breakpoint_sspace.
(breakpoint_address_match): New.
(check_duplicates_for): Add an address space argument, and adjust.
(set_raw_breakpoint): Record the symbol space in the location and
in the breakpoint.
(set_longjmp_breakpoint): Skip longjmp master breakpoints from
other symbol spaces.
(remove_thread_event_breakpoints, remove_solib_event_breakpoints)
(disable_breakpoints_in_shlibs): Skip breakpoints from other
symbol spaces.
(disable_breakpoints_in_unloaded_shlib): Match symbol spaces.
(create_catchpoint): Set the symbol space in the sal.
(disable_breakpoints_before_startup): Skip breakpoints from other
symbol spaces. Set executing_startup in the current symbol space.
(enable_breakpoints_after_startup): Clear executing_startup in the
current symbol space. Skip breakpoints from other symbol spaces.
(clone_momentary_breakpoint): Also copy the symbol space.
(add_location_to_breakpoint): Set the location's symbol space.
(bp_loc_is_permanent): Switch thread and symbol space.
(create_breakpoint): Adjust.
(expand_line_sal_maybe): Expand comment to mention symbol spaces.
Switch thread and symbol space when reading memory.
(parse_breakpoint_sals): Set the symbol space in the sal.
(break_command_really): Ditto.
(skip_prologue_sal): Switch and space.
(resolve_sal_pc): Ditto.
(watch_command_1): Record the symbol space in the sal.
(create_ada_exception_breakpoint): Adjust.
(clear_command): Adjust. Match symbol spaces.
(update_global_location_list): Use breakpoint_address_match.
(breakpoint_re_set_one): Switch thread and space.
(breakpoint_re_set): Save symbol space.
(breakpoint_re_set_thread): Also reset the symbol space.
(deprecated_insert_raw_breakpoint): Add an address space argument.
Adjust.
(insert_single_step_breakpoint): Ditto.
(single_step_breakpoint_inserted_here_p): Ditto.
(clear_syscall_counts): New.
(_initialize_breakpoint): Install it as inferior_exit observer.
* exec.h: Include "progspace.h".
(exec_bfd, exec_bfd_mtime): New defines.
(exec_close): Declare.
* exec.c: Include "gdbthread.h" and "progspace.h".
(exec_bfd, exec_bfd_mtime, current_target_sections_1): Delete.
(using_exec_ops): New.
(exec_close_1): Rename to exec_close, and make public.
(exec_close): Rename to exec_close_1, and adjust all callers. Add
description. Remove target sections and close executables from
all program spaces.
(exec_file_attach): Add comment.
(add_target_sections): Check on `using_exec_ops' to check if the
target should be pushed.
(remove_target_sections): Only unpush the target if there are no
more target sections in any symbol space.
* gdbcore.h: Include "exec.h".
(exec_bfd, exec_bfd_mtime): Remove declarations.
* frame.h (get_frame_program_space, get_frame_address_space)
(frame_unwind_program_space): Declare.
* frame.c (struct frame_info) <pspace, aspace>: New fields.
(create_sentinel_frame): Add program space argument. Set the
pspace and aspace fields of the frame object.
(get_current_frame, create_new_frame): Adjust.
(get_frame_program_space): New.
(frame_unwind_program_space): New.
(get_frame_address_space): New.
* stack.c (print_frame_info): Adjust.
(print_frame): Use the frame's program space.
* gdbthread.h (any_live_thread_of_process): Declare.
* thread.c (any_live_thread_of_process): New.
(switch_to_thread): Switch the program space as well.
(restore_selected_frame): Don't warn if trying to restore frame
level 0.
* inferior.h: Include "progspace.h".
(detach_fork): Declare.
(struct inferior) <removable, aspace, pspace>
<vfork_parent, vfork_child, pending_detach>
<waiting_for_vfork_done>: New fields.
<terminal_info>: Remove field.
<data, num_data>: New fields.
(register_inferior_data, register_inferior_data_with_cleanup)
(clear_inferior_data, set_inferior_data, inferior_data): Declare.
(exit_inferior, exit_inferior_silent, exit_inferior_num_silent)
(inferior_appeared): Declare.
(find_inferior_pid): Typo.
(find_inferior_id, find_inferior_for_program_space): Declare.
(set_current_inferior, save_current_inferior, prune_inferiors)
(number_of_inferiors): Declare.
(inferior_list): Declare.
* inferior.c: Include "gdbcore.h" and "symfile.h".
(inferior_list): Make public.
(delete_inferior_1): Always delete thread silently.
(find_inferior_id): Make public.
(current_inferior_): New.
(current_inferior): Use it.
(set_current_inferior): New.
(restore_inferior): New.
(save_current_inferior): New.
(free_inferior): Free the per-inferior data.
(add_inferior_silent): Allocate per-inferior data.
Call inferior_appeared.
(delete_threads_of_inferior): New.
(delete_inferior_1): Adjust interface to take an inferior pointer.
(delete_inferior): Adjust.
(delete_inferior_silent): Adjust.
(exit_inferior_1): New.
(exit_inferior): New.
(exit_inferior_silent): New.
(exit_inferior_num_silent): New.
(detach_inferior): Adjust.
(inferior_appeared): New.
(discard_all_inferiors): Adjust.
(find_inferior_id): Make public. Assert pid is not zero.
(find_inferior_for_program_space): New.
(have_inferiors): Check if we have any inferior with pid not zero.
(have_live_inferiors): Go over all pushed targets looking for
process_stratum.
(prune_inferiors): New.
(number_of_inferiors): New.
(print_inferior): Add executable column. Print vfork parent/child
relationships.
(inferior_command): Adjust to cope with not running inferiors.
(remove_inferior_command): New.
(add_inferior_command): New.
(clone_inferior_command): New.
(struct inferior_data): New.
(struct inferior_data_registration): New.
(struct inferior_data_registry): New.
(inferior_data_registry): New.
(register_inferior_data_with_cleanup): New.
(register_inferior_data): New.
(inferior_alloc_data): New.
(inferior_free_data): New.
(clear_inferior_data): New.
(set_inferior_data): New.
(inferior_data): New.
(initialize_inferiors): New.
(_initialize_inferiors): Register "add-inferior",
"remove-inferior" and "clone-inferior" commands.
* objfiles.h: Include "progspace.h".
(struct objfile) <pspace>: New field.
(symfile_objfile, object_files): Don't declare.
(ALL_PSPACE_OBJFILES): New.
(ALL_PSPACE_OBJFILES_SAFE): New.
(ALL_OBJFILES, ALL_OBJFILES_SAFE): Adjust.
(ALL_PSPACE_SYMTABS): New.
(ALL_PRIMARY_SYMTABS): Adjust.
(ALL_PSPACE_PRIMARY_SYMTABS): New.
(ALL_PSYMTABS): Adjust.
(ALL_PSPACE_PSYMTABS): New.
* objfiles.c (object_files, symfile_objfile): Delete.
(struct objfile_sspace_info): New.
(objfiles_pspace_data): New.
(objfiles_pspace_data_cleanup): New.
(get_objfile_pspace_data): New.
(objfiles_changed_p): Delete.
(allocate_objfile): Set the objfile's program space. Adjust to
reference objfiles_changed_p in pspace data.
(free_objfile): Adjust to reference objfiles_changed_p in pspace
data.
(objfile_relocate): Ditto.
(update_section_map): Add pspace argument. Adjust to iterate over
objfiles in the passed in pspace.
(find_pc_section): Delete sections and num_sections statics.
Adjust to refer to program space's objfiles_changed_p. Adjust to
refer to sections and num_sections store in the objfile's pspace
data.
(objfiles_changed): Adjust to reference objfiles_changed_p in
pspace data.
(_initialize_objfiles): New.
* linespec.c (decode_all_digits, decode_dollar): Set the sal's
program space.
* source.c (current_source_pspace): New.
(get_current_source_symtab_and_line): Set the sal's program space.
(set_current_source_symtab_and_line): Set current_source_pspace.
(select_source_symtab): Ditto. Use ALL_OBJFILES.
(forget_cached_source_info): Iterate over all program spaces.
* symfile.c (clear_symtab_users): Adjust.
* symmisc.c (print_symbol_bcache_statistics): Iterate over all
program spaces.
(print_objfile_statistics): Ditto.
(maintenance_print_msymbols): Ditto.
(maintenance_print_objfiles): Ditto.
(maintenance_info_symtabs): Ditto.
(maintenance_info_psymtabs): Ditto.
* symtab.h (SYMTAB_PSPACE): New.
(struct symtab_and_line) <pspace>: New field.
* symtab.c (init_sal): Clear the sal's program space.
(find_pc_sect_symtab): Set the sal's program space. Switch thread
and space.
(append_expanded_sal): Add program space argument. Iterate over
all program spaces.
(expand_line_sal): Iterate over all program spaces. Switch
program space.
* target.h (enum target_waitkind) <TARGET_WAITKIND_VFORK_DONE>: New.
(struct target_ops) <to_thread_address_space>: New field.
(target_thread_address_space): Define.
* target.c (target_detach): Only remove breakpoints from the
inferior we're detaching.
(target_thread_address_space): New.
* defs.h (initialize_progspace): Declare.
* top.c (gdb_init): Call it.
* solist.h (struct so_list) <sspace>: New field.
* solib.h (struct program_space): Forward declare.
(solib_name_from_address): Adjust prototype.
* solib.c (so_list_head): Replace with a macro referencing the
program space.
(update_solib_list): Set the so's program space.
(solib_name_from_address): Add a program space argument and adjust.
* solib-svr4.c (struct svr4_info) <pid>: Delete field.
<interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low>
<interp_plt_sect_high>: New fields.
(svr4_info_p, svr4_info): Delete.
(solib_svr4_sspace_data): New.
(get_svr4_info): Rewrite.
(svr4_sspace_data_cleanup): New.
(open_symbol_file_object): Adjust.
(svr4_default_sos): Adjust.
(svr4_fetch_objfile_link_map): Adjust.
(interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low)
(interp_plt_sect_high): Delete.
(svr4_in_dynsym_resolve_code): Adjust.
(enable_break): Adjust.
(svr4_clear_solib): Revert bit that removed the svr4_info here,
and reinstate clearing debug_base, debug_loader_offset_p,
debug_loader_offset and debug_loader_name.
(_initialize_svr4_solib): Register solib_svr4_pspace_data. Don't
install an inferior_exit observer anymore.
* printcmd.c (struct display) <pspace>: New field.
(display_command): Set the display's sspace.
(do_one_display): Match the display's sspace.
(display_uses_solib_p): Ditto.
* linux-fork.c (detach_fork): Moved to infrun.c.
(_initialize_linux_fork): Moved "detach-on-fork" command to
infrun.c.
* infrun.c (detach_fork): Moved from linux-fork.c.
(proceed_after_vfork_done): New.
(handle_vfork_child_exec_or_exit): New.
(follow_exec_mode_replace, follow_exec_mode_keep)
(follow_exec_mode_names, follow_exec_mode_string)
(show_follow_exec_mode_string): New.
(follow_exec): New. Reinstate the mark_breakpoints_out call.
Remove shared libraries before attaching new executable. If user
wants to keep the inferior, keep it.
(displaced_step_fixup): Adjust to pass an address space to the
breakpoints module.
(resume): Ditto.
(clear_proceed_status): In all-stop mode, always clear the proceed
status of all threads.
(prepare_to_proceed): Adjust to pass an address space to the
breakpoints module.
(proceed): Ditto.
(adjust_pc_after_break): Ditto.
(handle_inferior_event): When handling a process exit, switch the
program space to the inferior's that had exited. Call
handle_vfork_child_exec_or_exit. Adjust to pass an address space
to the breakpoints module. In non-stop mode, when following a
fork and detach-fork is off, also resume the other branch. Handle
TARGET_WAITKIND_VFORK_DONE. Set the program space in sals.
(normal_stop): Prune inferiors.
(_initialize_infrun): Install the new "follow-exec-mode" command.
"detach-on-fork" moved here.
* regcache.h (get_regcache_aspace): Declare.
* regcache.c (struct regcache) <aspace>: New field.
(regcache_xmalloc): Clear the aspace.
(get_regcache_aspace): New.
(regcache_cpy): Copy the aspace field.
(regcache_cpy_no_passthrough): Ditto.
(get_thread_regcache): Fetch the thread's address space from the
target, and store it in the regcache.
* infcall.c (call_function_by_hand): Set the sal's pspace.
* arch-utils.c (default_has_shared_address_space): New.
* arch-utils.h (default_has_shared_address_space): Declare.
* gdbarch.sh (has_shared_address_space): New.
* gdbarch.h, gdbarch.c: Regenerate.
* linux-tdep.c: Include auxv.h, target.h, elf/common.h.
(linux_has_shared_address_space): New.
(_initialize_linux_tdep): Declare.
* arm-tdep.c (arm_software_single_step): Pass the frame's address
space to insert_single_step_breakpoint.
* arm-linux-tdep.c (arm_linux_software_single_step): Pass the
frame's pspace to breakpoint functions.
* cris-tdep.c (crisv32_single_step_through_delay): Ditto.
(cris_software_single_step): Ditto.
* mips-tdep.c (deal_with_atomic_sequence): Add frame argument.
Pass the frame's pspace to breakpoint functions.
(mips_software_single_step): Adjust.
(mips_single_step_through_delay): Adjust.
* rs6000-aix-tdep.c (rs6000_software_single_step): Adjust.
* rs6000-tdep.c (ppc_deal_with_atomic_sequence): Adjust.
* solib-irix.c (enable_break): Adjust to pass the current frame's
address space to breakpoint functions.
* sparc-tdep.c (sparc_software_single_step): Ditto.
* spu-tdep.c (spu_software_single_step): Ditto.
* alpha-tdep.c (alpha_software_single_step): Ditto.
* record.c (record_wait): Adjust to pass an address space to the
breakpoints module.
* fork-child.c (fork_inferior): Set the new inferior's program and
address spaces.
* inf-ptrace.c (inf_ptrace_follow_fork): Copy the parent's program
and address spaces.
(inf_ptrace_attach): Set the inferior's program and address spaces.
* linux-nat.c: Include "solib.h".
(linux_child_follow_fork): Manage parent and child's program and
address spaces. Clone the parent's program space if necessary.
Don't wait for the vfork to be done here. Refuse to resume if
following the vfork parent while leaving the child stopped.
(resume_callback): Don't resume a vfork parent.
(linux_nat_resume): Also check for pending events in the
lp->waitstatus field.
(linux_handle_extended_wait): Report TARGET_WAITKIND_VFORK_DONE
events to the core.
(stop_wait_callback): Don't wait for SIGSTOP on vfork parents.
(cancel_breakpoint): Adjust.
* linux-thread-db.c (thread_db_wait): Don't remove thread event
breakpoints here.
(thread_db_mourn_inferior): Don't mark breakpoints out here.
Remove thread event breakpoints after mourning.
* corelow.c: Include progspace.h.
(core_open): Set the inferior's program and address spaces.
* remote.c (remote_add_inferior): Set the new inferior's program
and address spaces.
(remote_start_remote): Update address spaces.
(extended_remote_create_inferior_1): Don't init the thread list if
we already debugging other inferiors.
* darwin-nat.c (darwin_attach): Set the new inferior's program and
address spaces.
* gnu-nat.c (gnu_attach): Ditto.
* go32-nat.c (go32_create_inferior): Ditto.
* inf-ttrace.c (inf_ttrace_follow_fork, inf_ttrace_attach): Ditto.
* monitor.c (monitor_open): Ditto.
* nto-procfs.c (procfs_attach, procfs_create_inferior): Ditto.
* procfs.c (do_attach): Ditto.
* windows-nat.c (do_initial_windows_stuff): Ditto.
* inflow.c (inferior_process_group)
(terminal_init_inferior_with_pgrp, terminal_inferior,
(terminal_ours_1, inflow_inferior_exit, copy_terminal_info)
(child_terminal_info, new_tty_postfork, set_sigint_trap): Adjust
to use per-inferior data instead of inferior->terminal_info.
(inflow_inferior_data): New.
(inflow_new_inferior): Delete.
(inflow_inferior_data_cleanup): New.
(get_inflow_inferior_data): New.
* mi/mi-interp.c (mi_new_inferior): Rename to...
(mi_inferior_appeared): ... this.
(mi_interpreter_init): Adjust.
* tui/tui-disasm.c: Include "progspace.h".
(tui_set_disassem_content): Pass an address space to
breakpoint_here_p.
* NEWS: Mention multi-program debugging support. Mention new
commands "add-inferior", "clone-inferior", "remove-inferior",
"maint info program-spaces", and new option "set
follow-exec-mode".
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/doc/
* observer.texi (new_inferior): Rename to...
(inferior_appeared): ... this.
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/testsuite/
* gdb.base/foll-vfork.exp: Adjust to spell out "follow-fork".
* gdb.base/foll-exec.exp: Adjust to expect a process id before
"Executing new program".
* gdb.base/foll-fork.exp: Adjust to spell out "follow-fork".
* gdb.base/multi-forks.exp: Ditto. Adjust to the inferior being
left listed after having been killed.
* gdb.base/attach.exp: Adjust to spell out "symbol-file".
* gdb.base/maint.exp: Adjust test.
* Makefile.in (ALL_SUBDIRS): Add gdb.multi.
* gdb.multi/Makefile.in: New.
* gdb.multi/base.exp: New.
* gdb.multi/goodbye.c: New.
* gdb.multi/hangout.c: New.
* gdb.multi/hello.c: New.
* gdb.multi/bkpt-multi-exec.c: New.
* gdb.multi/bkpt-multi-exec.exp: New.
* gdb.multi/crashme.c: New.
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/doc/
* gdb.texinfo (Inferiors): Rename node to ...
(Inferiors and Programs): ... this. Mention running multiple
programs in the same debug session.
<info inferiors>: Mention the new 'Executable' column if "info
inferiors". Update examples. Document the "add-inferior",
"clone-inferior", "remove-inferior" and "maint info
program-spaces" commands.
(Process): Rename node to...
(Forks): ... this. Document "set|show follow-exec-mode".
2009-10-19 09:51:43 +00:00
Pedro Alves
8903eff681
* procfs.c (procfs_make_note_section): Go back to only outputing
...
an NT_PSTATUS note when UNIXWARE is defined.
2009-10-11 22:50:08 +00:00
Pedro Alves
651c8d2d6c
* procfs.c (procfs_make_note_section): Always output a NT_PSTATUS
...
note when NEW_PROC_API is defined.
2009-10-09 01:28:02 +00:00
Kazu Hirata
73930d4df0
* procfs.c (proc_set_current_signal): Populate mysinfo before
...
copying it to arg.
(proc_clear_current_signal): Likewise.
(proc_set_watchpoint): Populate pwatch before copying it to arg.
2009-08-01 00:02:04 +00:00
Ulrich Weigand
e17a411335
* defs.h (extract_signed_integer, extract_unsigned_integer,
...
extract_long_unsigned_integer, store_signed_integer,
store_unsigned_integer): Add BYTE_ORDER parameter.
* findvar.c (extract_signed_integer, extract_unsigned_integer,
extract_long_unsigned_integer, store_signed_integer,
store_unsigned_integer): Add BYTE_ORDER parameter. Use it
instead of current_gdbarch.
* gdbcore.h (read_memory_integer, safe_read_memory_integer,
read_memory_unsigned_integer, write_memory_signed_integer,
write_memory_unsigned_integer): Add BYTE_ORDER parameter.
* corefile.c (struct captured_read_memory_integer_arguments): Add
BYTE_ORDER member.
(safe_read_memory_integer): Add BYTE_ORDER parameter. Store it into
struct captured_read_memory_integer_arguments.
(do_captured_read_memory_integer): Pass it to read_memory_integer.
(read_memory_integer): Add BYTE_ORDER parameter. Pass it to
extract_signed_integer.
(read_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it to
extract_unsigned_integer.
(write_memory_signed_integer): Add BYTE_ORDER parameter. Pass it
to store_signed_integer.
(write_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it
to store_unsigned_integer.
* target.h (get_target_memory_unsigned): Add BYTE_ORDER parameter.
* target.c (get_target_memory_unsigned): Add BYTE_ORDER parameter.
Pass it to extract_unsigned_integer.
Update calls to extract_signed_integer, extract_unsigned_integer,
extract_long_unsigned_integer, store_signed_integer,
store_unsigned_integer, read_memory_integer,
read_memory_unsigned_integer, safe_read_memory_integer,
write_memory_signed_integer, write_memory_unsigned_integer, and
get_target_memory_unsigned to pass byte order:
* ada-lang.c (ada_value_binop): Update.
* ada-valprint.c (char_at): Update.
* alpha-osf1-tdep.c (alpha_osf1_sigcontext_addr): Update.
* alpha-tdep.c (alpha_lds, alpha_sts, alpha_push_dummy_call,
alpha_extract_return_value, alpha_read_insn,
alpha_get_longjmp_target): Update.
* amd64-linux-tdep.c (amd64_linux_sigcontext_addr): Update.
* amd64obsd-tdep.c (amd64obsd_supply_uthread,
amd64obsd_collect_uthread, amd64obsd_trapframe_cache): Update.
* amd64-tdep.c (amd64_push_dummy_call, amd64_analyze_prologue,
amd64_frame_cache, amd64_sigtramp_frame_cache, fixup_riprel,
amd64_displaced_step_fixup): Update.
* arm-linux-tdep.c (arm_linux_sigreturn_init,
arm_linux_rt_sigreturn_init, arm_linux_supply_gregset): Update.
* arm-tdep.c (thumb_analyze_prologue, arm_skip_prologue,
arm_scan_prologue, arm_push_dummy_call, thumb_get_next_pc,
arm_get_next_pc, arm_extract_return_value, arm_store_return_value,
arm_return_value): Update.
* arm-wince-tdep.c (arm_pe_skip_trampoline_code): Update.
* auxv.c (default_auxv_parse): Update.
* avr-tdep.c (avr_address_to_pointer, avr_pointer_to_address,
avr_scan_prologue, avr_extract_return_value,
avr_frame_prev_register, avr_push_dummy_call): Update.
* bsd-uthread.c (bsd_uthread_check_magic, bsd_uthread_lookup_offset,
bsd_uthread_wait, bsd_uthread_thread_alive,
bsd_uthread_extra_thread_info): Update.
* c-lang.c (c_printstr, print_wchar): Update.
* cp-valprint.c (cp_print_class_member): Update.
* cris-tdep.c (cris_sigcontext_addr, cris_sigtramp_frame_unwind_cache,
cris_push_dummy_call, cris_scan_prologue, cris_store_return_value,
cris_extract_return_value, find_step_target, dip_prefix,
sixteen_bit_offset_branch_op, none_reg_mode_jump_op,
move_mem_to_reg_movem_op, get_data_from_address): Update.
* dwarf2expr.c (dwarf2_read_address, execute_stack_op): Update.
* dwarf2-frame.c (execute_cfa_program): Update.
* dwarf2loc.c (find_location_expression): Update.
* dwarf2read.c (dwarf2_const_value): Update.
* expprint.c (print_subexp_standard): Update.
* findvar.c (unsigned_pointer_to_address, signed_pointer_to_address,
unsigned_address_to_pointer, address_to_signed_pointer,
read_var_value): Update.
* frame.c (frame_unwind_register_signed,
frame_unwind_register_unsigned, get_frame_memory_signed,
get_frame_memory_unsigned): Update.
* frame-unwind.c (frame_unwind_got_constant): Update.
* frv-linux-tdep.c (frv_linux_pc_in_sigtramp,
frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache):
Update.
* frv-tdep.c (frv_analyze_prologue, frv_skip_main_prologue,
frv_extract_return_value, find_func_descr,
frv_convert_from_func_ptr_addr, frv_push_dummy_call): Update.
* f-valprint.c (f_val_print): Update.
* gnu-v3-abi.c (gnuv3_decode_method_ptr, gnuv3_make_method_ptr):
Update.
* h8300-tdep.c (h8300_is_argument_spill, h8300_analyze_prologue,
h8300_push_dummy_call, h8300_extract_return_value,
h8300h_extract_return_value, h8300_store_return_value,
h8300h_store_return_value): Update.
* hppabsd-tdep.c (hppabsd_find_global_pointer): Update.
* hppa-hpux-nat.c (hppa_hpux_fetch_register, hppa_hpux_store_register):
Update.
* hppa-hpux-tdep.c (hppa32_hpux_in_solib_call_trampoline,
hppa64_hpux_in_solib_call_trampoline,
hppa_hpux_in_solib_return_trampoline, hppa_hpux_skip_trampoline_code,
hppa_hpux_sigtramp_frame_unwind_cache,
hppa_hpux_sigtramp_unwind_sniffer, hppa32_hpux_find_global_pointer,
hppa64_hpux_find_global_pointer, hppa_hpux_search_pattern,
hppa32_hpux_search_dummy_call_sequence,
hppa64_hpux_search_dummy_call_sequence, hppa_hpux_supply_save_state,
hppa_hpux_unwind_adjust_stub): Update.
* hppa-linux-tdep.c (insns_match_pattern,
hppa_linux_find_global_pointer): Update.
* hppa-tdep.c (hppa_in_function_epilogue_p, hppa32_push_dummy_call,
hppa64_convert_code_addr_to_fptr, hppa64_push_dummy_call,
skip_prologue_hard_way, hppa_frame_cache, hppa_fallback_frame_cache,
hppa_pseudo_register_read, hppa_frame_prev_register_helper,
hppa_match_insns): Update.
* hpux-thread.c (hpux_thread_fetch_registers): Update.
* i386-tdep.c (i386bsd_sigcontext_addr): Update.
* i386-cygwin-tdep.c (core_process_module_section): Update.
* i386-darwin-nat.c (i386_darwin_sstep_at_sigreturn,
amd64_darwin_sstep_at_sigreturn): Update.
* i386-darwin-tdep.c (i386_darwin_sigcontext_addr,
amd64_darwin_sigcontext_addr): Likewise.
* i386-linux-nat.c (i386_linux_sigcontext_addr): Update.
* i386nbsd-tdep.c (i386nbsd_sigtramp_cache_init): Update.
* i386-nto-tdep.c (i386nto_sigcontext_addr): Update.
* i386obsd-nat.c (i386obsd_supply_pcb): Update.
* i386obsd-tdep.c (i386obsd_supply_uthread, i386obsd_collect_uthread,
i386obsd_trapframe_cache): Update.
* i386-tdep.c (i386_displaced_step_fixup, i386_follow_jump,
i386_analyze_frame_setup, i386_analyze_prologue,
i386_skip_main_prologue, i386_frame_cache, i386_sigtramp_frame_cache,
i386_get_longjmp_target, i386_push_dummy_call,
i386_pe_skip_trampoline_code, i386_svr4_sigcontext_addr,
i386_fetch_pointer_argument): Update.
* i387-tdep.c (i387_supply_fsave): Update.
* ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Update.
* ia64-tdep.c (ia64_pseudo_register_read, ia64_pseudo_register_write,
examine_prologue, ia64_frame_cache, ia64_frame_prev_register,
ia64_sigtramp_frame_cache, ia64_sigtramp_frame_prev_register,
ia64_access_reg, ia64_access_rse_reg, ia64_libunwind_frame_this_id,
ia64_libunwind_frame_prev_register,
ia64_libunwind_sigtramp_frame_this_id,
ia64_libunwind_sigtramp_frame_prev_register, ia64_find_global_pointer,
find_extant_func_descr, find_func_descr,
ia64_convert_from_func_ptr_addr, ia64_push_dummy_call, ia64_dummy_id,
ia64_unwind_pc): Update.
* iq2000-tdep.c (iq2000_pointer_to_address, iq2000_address_to_pointer,
iq2000_scan_prologue, iq2000_extract_return_value,
iq2000_push_dummy_call): Update.
* irix5nat.c (fill_gregset): Update.
* jv-lang.c (evaluate_subexp_java): Update.
* jv-valprint.c (java_value_print): Update.
* lm32-tdep.c (lm32_analyze_prologue, lm32_push_dummy_call,
lm32_extract_return_value, lm32_store_return_value): Update.
* m32c-tdep.c (m32c_push_dummy_call, m32c_return_value,
m32c_skip_trampoline_code, m32c_m16c_address_to_pointer,
m32c_m16c_pointer_to_address): Update.
* m32r-tdep.c (m32r_store_return_value, decode_prologue,
m32r_skip_prologue, m32r_push_dummy_call, m32r_extract_return_value):
Update.
* m68hc11-tdep.c (m68hc11_pseudo_register_read,
m68hc11_pseudo_register_write, m68hc11_analyze_instruction,
m68hc11_push_dummy_call): Update.
* m68linux-tdep.c (m68k_linux_pc_in_sigtramp,
m68k_linux_get_sigtramp_info, m68k_linux_sigtramp_frame_cache):
Update.
* m68k-tdep.c (m68k_push_dummy_call, m68k_analyze_frame_setup,
m68k_analyze_register_saves, m68k_analyze_prologue, m68k_frame_cache,
m68k_get_longjmp_target): Update.
* m88k-tdep.c (m88k_fetch_instruction): Update.
* mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_csr_write,
mep_pseudo_cr32_write, mep_get_insn, mep_push_dummy_call): Update.
* mi/mi-main.c (mi_cmd_data_write_memory): Update.
* mips-linux-tdep.c (mips_linux_get_longjmp_target, supply_32bit_reg,
mips64_linux_get_longjmp_target, mips64_fill_gregset,
mips64_fill_fpregset, mips_linux_in_dynsym_stub): Update.
* mipsnbdsd-tdep.c (mipsnbsd_get_longjmp_target): Update.
* mips-tdep.c (mips_fetch_instruction, fetch_mips_16,
mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call,
mips_o32_push_dummy_call, mips_o64_push_dummy_call,
mips_single_step_through_delay, mips_skip_pic_trampoline_code,
mips_integer_to_address): Update.
* mn10300-tdep.c (mn10300_analyze_prologue, mn10300_push_dummy_call):
Update.
* monitor.c (monitor_supply_register, monitor_write_memory,
monitor_read_memory_single): Update.
* moxie-tdep.c (moxie_store_return_value, moxie_extract_return_value,
moxie_analyze_prologue): Update.
* mt-tdep.c (mt_return_value, mt_skip_prologue, mt_select_coprocessor,
mt_pseudo_register_read, mt_pseudo_register_write, mt_registers_info,
mt_push_dummy_call): Update.
* objc-lang.c (read_objc_method, read_objc_methlist_nmethods,
read_objc_methlist_method, read_objc_object, read_objc_super,
read_objc_class, find_implementation_from_class): Update.
* ppc64-linux-tdep.c (ppc64_desc_entry_point,
ppc64_linux_convert_from_func_ptr_addr, ppc_linux_sigtramp_cache):
Update.
* ppcobsd-tdep.c (ppcobsd_sigtramp_frame_sniffer,
ppcobsd_sigtramp_frame_cache): Update.
* ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call,
do_ppc_sysv_return_value, ppc64_sysv_abi_push_dummy_call,
ppc64_sysv_abi_return_value): Update.
* ppc-linux-nat.c (ppc_linux_auxv_parse): Update.
* procfs.c (procfs_auxv_parse): Update.
* p-valprint.c (pascal_val_print): Update.
* regcache.c (regcache_raw_read_signed, regcache_raw_read_unsigned,
regcache_raw_write_signed, regcache_raw_write_unsigned,
regcache_cooked_read_signed, regcache_cooked_read_unsigned,
regcache_cooked_write_signed, regcache_cooked_write_unsigned): Update.
* remote-m32r-sdi.c (m32r_fetch_register): Update.
* remote-mips.c (mips_wait, mips_fetch_registers, mips_xfer_memory):
Update.
* rs6000-aix-tdep.c (rs6000_push_dummy_call, rs6000_return_value,
rs6000_convert_from_func_ptr_addr, branch_dest,
rs6000_software_single_step): Update.
* rs6000-tdep.c (rs6000_in_function_epilogue_p,
ppc_displaced_step_fixup, ppc_deal_with_atomic_sequence,
bl_to_blrl_insn_p, rs6000_fetch_instruction, skip_prologue,
rs6000_skip_main_prologue, rs6000_skip_trampoline_code,
rs6000_frame_cache): Update.
* s390-tdep.c (s390_pseudo_register_read, s390_pseudo_register_write,
s390x_pseudo_register_read, s390x_pseudo_register_write, s390_load,
s390_backchain_frame_unwind_cache, s390_sigtramp_frame_unwind_cache,
extend_simple_arg, s390_push_dummy_call, s390_return_value): Update.
* scm-exp.c (scm_lreadr): Update.
* scm-lang.c (scm_get_field, scm_unpack): Update.
* scm-valprint.c (scm_val_print): Update.
* score-tdep.c (score_breakpoint_from_pc, score_push_dummy_call,
score_fetch_inst): Update.
* sh64-tdep.c (look_for_args_moves, sh64_skip_prologue_hard_way,
sh64_analyze_prologue, sh64_push_dummy_call, sh64_extract_return_value,
sh64_pseudo_register_read, sh64_pseudo_register_write,
sh64_frame_prev_register): Update:
* sh-tdep.c (sh_analyze_prologue, sh_push_dummy_call_fpu,
sh_push_dummy_call_nofpu, sh_extract_return_value_nofpu,
sh_store_return_value_nofpu, sh_in_function_epilogue_p): Update.
* solib-darwin.c (darwin_load_image_infos): Update.
* solib-frv.c (fetch_loadmap, lm_base, frv_current_sos, enable_break2,
find_canonical_descriptor_in_load_object): Update.
* solib-irix.c (extract_mips_address, fetch_lm_info, irix_current_sos,
irix_open_symbol_file_object): Update.
* solib-som.c (som_solib_create_inferior_hook, link_map_start,
som_current_sos, som_open_symbol_file_object): Update.
* solib-sunos.c (SOLIB_EXTRACT_ADDRESS, LM_ADDR, LM_NEXT, LM_NAME):
Update.
* solib-svr4.c (read_program_header, scan_dyntag_auxv,
solib_svr4_r_ldsomap): Update.
* sparc64-linux-tdep.c (sparc64_linux_step_trap): Update.
* sparc64obsd-tdep.c (sparc64obsd_supply_uthread,
sparc64obsd_collect_uthread): Update.
* sparc64-tdep.c (sparc64_pseudo_register_read,
sparc64_pseudo_register_write, sparc64_supply_gregset,
sparc64_collect_gregset): Update.
* sparc-linux-tdep.c (sparc32_linux_step_trap): Update.
* sparcobsd-tdep.c (sparc32obsd_supply_uthread,
sparc32obsd_collect_uthread): Update.
* sparc-tdep.c (sparc_fetch_wcookie, sparc32_push_dummy_code,
sparc32_store_arguments, sparc32_return_value, sparc_supply_rwindow,
sparc_collect_rwindow): Update.
* spu-linux-nat.c (parse_spufs_run): Update.
* spu-tdep.c (spu_pseudo_register_read_spu,
spu_pseudo_register_write_spu, spu_pointer_to_address,
spu_analyze_prologue, spu_in_function_epilogue_p,
spu_frame_unwind_cache, spu_push_dummy_call, spu_software_single_step,
spu_get_longjmp_target, spu_get_overlay_table, spu_overlay_update_osect,
info_spu_signal_command, info_spu_mailbox_list, info_spu_dma_cmdlist,
info_spu_dma_command, info_spu_proxydma_command): Update.
* stack.c (print_frame_nameless_args, frame_info): Update.
* symfile.c (read_target_long_array, simple_read_overlay_table,
simple_read_overlay_region_table): Update.
* target.c (debug_print_register): Update.
* tramp-frame.c (tramp_frame_start): Update.
* v850-tdep.c (v850_analyze_prologue, v850_push_dummy_call,
v850_extract_return_value, v850_store_return_value,
* valarith.c (value_binop, value_bit_index): Update.
* valops.c (value_cast): Update.
* valprint.c (val_print_type_code_int, val_print_string,
read_string): Update.
* value.c (unpack_long, unpack_double, unpack_field_as_long,
modify_field, pack_long): Update.
* vax-tdep.c (vax_store_arguments, vax_push_dummy_call,
vax_skip_prologue): Update.
* xstormy16-tdep.c (xstormy16_push_dummy_call,
xstormy16_analyze_prologue, xstormy16_in_function_epilogue_p,
xstormy16_resolve_jmp_table_entry, xstormy16_find_jmp_table_entry,
xstormy16_pointer_to_address, xstormy16_address_to_pointer): Update.
* xtensa-tdep.c (extract_call_winsize, xtensa_pseudo_register_read,
xtensa_pseudo_register_write, xtensa_frame_cache,
xtensa_push_dummy_call, call0_track_op, call0_frame_cache): Update.
* dfp.h (decimal_to_string, decimal_from_string, decimal_from_integral,
decimal_from_floating, decimal_to_doublest, decimal_is_zero): Add
BYTE_ORDER parameter.
(decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT
parameters.
(decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters.
(decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters.
* dfp.c (match_endianness): Add BYTE_ORDER parameter. Use it
instead of current_gdbarch.
(decimal_to_string, decimal_from_integral, decimal_from_floating,
decimal_to_doublest, decimal_is_zero): Add BYTE_ORDER parameter.
Pass it to match_endianness.
(decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT
parameters. Pass them to match_endianness.
(decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters.
Pass them to match_endianness.
(decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters.
Pass them to match_endianness.
* valarith.c (value_args_as_decimal): Add BYTE_ORDER_X and
BYTE_ORDER_Y output parameters.
(value_binop): Update call to value_args_as_decimal.
Update calls to decimal_to_string, decimal_from_string,
decimal_from_integral, decimal_from_floating, decimal_to_doublest,
decimal_is_zero, decimal_binop, decimal_compare and decimal_convert
to pass/receive byte order:
* c-exp.y (parse_number): Update.
* printcmd.c (printf_command): Update.
* valarith.c (value_args_as_decimal, value_binop, value_logical_not,
value_equal, value_less): Update.
* valops.c (value_cast, value_one): Update.
* valprint.c (print_decimal_floating): Update.
* value.c (unpack_long, unpack_double): Update.
* python/python-value.c (valpy_nonzero): Update.
* ada-valprint.c (char_at): Add BYTE_ORDER parameter.
(printstr): Update calls to char_at.
(ada_val_print_array): Likewise.
* valprint.c (read_string): Add BYTE_ORDER parameter.
(val_print_string): Update call to read_string.
* c-lang.c (c_get_string): Likewise.
* charset.h (target_wide_charset): Add BYTE_ORDER parameter.
* charset.c (target_wide_charset): Add BYTE_ORDER parameter.
Use it instead of current_gdbarch.
* printcmd.c (printf_command): Update calls to target_wide_charset.
* c-lang.c (charset_for_string_type): Add BYTE_ORDER parameter.
Pass to target_wide_charset. Use it instead of current_gdbarch.
(classify_type): Add BYTE_ORDER parameter. Pass to
charset_for_string_type. Allow NULL encoding pointer.
(print_wchar): Add BYTE_ORDER parameter.
(c_emit_char): Update calls to classify_type and print_wchar.
(c_printchar, c_printstr): Likewise.
* gdbarch.sh (in_solib_return_trampoline): Convert to type "m".
* gdbarch.c, gdbarch.h: Regenerate.
* arch-utils.h (generic_in_solib_return_trampoline): Add GDBARCH
parameter.
* arch-utils.c (generic_in_solib_return_trampoline): Likewise.
* hppa-hpux-tdep.c (hppa_hpux_in_solib_return_trampoline): Likewise.
* rs6000-tdep.c (rs6000_in_solib_return_trampoline): Likewise.
(rs6000_skip_trampoline_code): Update call.
* alpha-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to
dynamic_sigtramp_offset and pc_in_sigtramp callbacks.
(alpha_read_insn): Add GDBARCH parameter.
* alpha-tdep.c (alpha_lds, alpha_sts): Add GDBARCH parameter.
(alpha_register_to_value): Pass architecture to alpha_sts.
(alpha_extract_return_value): Likewise.
(alpha_value_to_register): Pass architecture to alpha_lds.
(alpha_store_return_value): Likewise.
(alpha_read_insn): Add GDBARCH parameter.
(alpha_skip_prologue): Pass architecture to alpha_read_insn.
(alpha_heuristic_proc_start): Likewise.
(alpha_heuristic_frame_unwind_cache): Likewise.
(alpha_next_pc): Likewise.
(alpha_sigtramp_frame_this_id): Pass architecture to
tdep->dynamic_sigtramp_offset callback.
(alpha_sigtramp_frame_sniffer): Pass architecture to
tdep->pc_in_sigtramp callback.
* alphafbsd-tdep.c (alphafbsd_pc_in_sigtramp): Add GDBARCH parameter.
(alphafbsd_sigtramp_offset): Likewise.
* alpha-linux-tdep.c (alpha_linux_sigtramp_offset_1): Add GDBARCH
parameter. Pass to alpha_read_insn.
(alpha_linux_sigtramp_offset): Add GDBARCH parameter. Pass to
alpha_linux_sigtramp_offset_1.
(alpha_linux_pc_in_sigtramp): Add GDBARCH parameter. Pass to
alpha_linux_sigtramp_offset.
(alpha_linux_sigcontext_addr): Pass architecture to alpha_read_insn
and alpha_linux_sigtramp_offset.
* alphanbsd-tdep.c (alphanbsd_sigtramp_offset): Add GDBARCH parameter.
(alphanbsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to
alphanbsd_sigtramp_offset.
* alphaobsd-tdep.c (alphaobsd_sigtramp_offset): Add GDBARCH parameter.
(alphaobsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to
alpha_read_insn.
(alphaobsd_sigcontext_addr): Pass architecture to
alphaobsd_sigtramp_offset.
* alpha-osf1-tdep.c (alpha_osf1_pc_in_sigtramp): Add GDBARCH
parameter.
* amd64-tdep.c (amd64_analyze_prologue): Add GDBARCH parameter.
(amd64_skip_prologue): Pass architecture to amd64_analyze_prologue.
(amd64_frame_cache): Likewise.
* arm-tdep.c (SWAP_SHORT, SWAP_INT): Remove.
(thumb_analyze_prologue, arm_skip_prologue, arm_scan_prologue,
thumb_get_next_pc, arm_get_next_pc): Do not use SWAP_ macros.
* arm-wince-tdep.c: Include "frame.h".
* avr-tdep.c (EXTRACT_INSN): Remove.
(avr_scan_prologue): Add GDBARCH argument, inline EXTRACT_INSN.
(avr_skip_prologue): Pass architecture to avr_scan_prologue.
(avr_frame_unwind_cache): Likewise.
* cris-tdep.c (struct instruction_environment): Add BYTE_ORDER member.
(find_step_target): Initialize it.
(get_data_from_address): Add BYTE_ORDER parameter.
(bdap_prefix): Pass byte order to get_data_from_address.
(handle_prefix_assign_mode_for_aritm_op): Likewise.
(three_operand_add_sub_cmp_and_or_op): Likewise.
(handle_inc_and_index_mode_for_aritm_op): Likewise.
* frv-linux-tdep.c (frv_linux_pc_in_sigtramp): Add GDBARCH parameter.
(frv_linux_sigcontext_reg_addr): Pass architecture to
frv_linux_pc_in_sigtramp.
(frv_linux_sigtramp_frame_sniffer): Likewise.
* h8300-tdep.c (h8300_is_argument_spill): Add GDBARCH parameter.
(h8300_analyze_prologue): Add GDBARCH parameter. Pass to
h8300_is_argument_spill.
(h8300_frame_cache, h8300_skip_prologue): Pass architecture
to h8300_analyze_prologue.
* hppa-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to
in_solib_call_trampoline callback.
(hppa_in_solib_call_trampoline): Add GDBARCH parameter.
* hppa-tdep.c (hppa64_convert_code_addr_to_fptr): Add GDBARCH
parameter.
(hppa64_push_dummy_call): Pass architecture to
hppa64_convert_code_addr_to_fptr.
(hppa_match_insns): Add GDBARCH parameter.
(hppa_match_insns_relaxed): Add GDBARCH parameter. Pass to
hppa_match_insns.
(hppa_skip_trampoline_code): Pass architecture to hppa_match_insns.
(hppa_in_solib_call_trampoline): Add GDBARCH parameter. Pass to
hppa_match_insns_relaxed.
(hppa_stub_unwind_sniffer): Pass architecture to
tdep->in_solib_call_trampoline callback.
* hppa-hpux-tdep.c (hppa_hpux_search_pattern): Add GDBARCH parameter.
(hppa32_hpux_search_dummy_call_sequence): Pass architecture to
hppa_hpux_search_pattern.
* hppa-linux-tdep.c (insns_match_pattern): Add GDBARCH parameter.
(hppa_linux_sigtramp_find_sigcontext): Add GDBARCH parameter.
Pass to insns_match_pattern.
(hppa_linux_sigtramp_frame_unwind_cache): Pass architecture to
hppa_linux_sigtramp_find_sigcontext.
(hppa_linux_sigtramp_frame_sniffer): Likewise.
(hppa32_hpux_in_solib_call_trampoline): Add GDBARCH parameter.
(hppa64_hpux_in_solib_call_trampoline): Likewise.
* i386-tdep.c (i386_follow_jump): Add GDBARCH parameter.
(i386_analyze_frame_setup): Add GDBARCH parameter.
(i386_analyze_prologue): Add GDBARCH parameter. Pass to
i386_follow_jump and i386_analyze_frame_setup.
(i386_skip_prologue): Pass architecture to i386_analyze_prologue
and i386_follow_jump.
(i386_frame_cache): Pass architecture to i386_analyze_prologue.
(i386_pe_skip_trampoline_code): Add FRAME parameter.
* i386-tdep.h (i386_pe_skip_trampoline_code): Add FRAME parameter.
* i386-cygwin-tdep.c (i386_cygwin_skip_trampoline_code): Pass
frame to i386_pe_skip_trampoline_code.
* ia64-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter
to sigcontext_register_address callback.
* ia64-tdep.c (ia64_find_global_pointer): Add GDBARCH parameter.
(ia64_find_unwind_table): Pass architecture to
ia64_find_global_pointer.
(find_extant_func_descr): Add GDBARCH parameter.
(find_func_descr): Pass architecture to find_extant_func_descr
and ia64_find_global_pointer.
(ia64_sigtramp_frame_init_saved_regs): Pass architecture to
tdep->sigcontext_register_address callback.
* ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Add
GDBARCH parameter.
* iq2000-tdep.c (iq2000_scan_prologue): Add GDBARCH parameter.
(iq2000_frame_cache): Pass architecture to iq2000_scan_prologue.
* lm32-tdep.c (lm32_analyze_prologue): Add GDBARCH parameter.
(lm32_skip_prologue, lm32_frame_cache): Pass architecture to
lm32_analyze_prologue.
* m32r-tdep.c (decode_prologue): Add GDBARCH parameter.
(m32r_skip_prologue): Pass architecture to decode_prologue.
* m68hc11-tdep.c (m68hc11_analyze_instruction): Add GDBARCH parameter.
(m68hc11_scan_prologue): Pass architecture to
m68hc11_analyze_instruction.
* m68k-tdep.c (m68k_analyze_frame_setup): Add GDBARCH parameter.
(m68k_analyze_prologue): Pass architecture to
m68k_analyze_frame_setup.
* m88k-tdep.c (m88k_fetch_instruction): Add BYTE_ORDER parameter.
(m88k_analyze_prologue): Add GDBARCH parameter. Pass byte order
to m88k_fetch_instruction.
(m88k_skip_prologue): Pass architecture to m88k_analyze_prologue.
(m88k_frame_cache): Likewise.
* mep-tdep.c (mep_get_insn): Add GDBARCH parameter.
(mep_analyze_prologue): Pass architecture to mep_get_insn.
* mips-tdep.c (mips_fetch_instruction): Add GDBARCH parameter.
(mips32_next_pc): Pass architecture to mips_fetch_instruction.
(deal_with_atomic_sequence): Likewise.
(unpack_mips16): Add GDBARCH parameter, pass to mips_fetch_instruction.
(mips16_scan_prologue): Likewise.
(mips32_scan_prologue): Likewise.
(mips16_in_function_epilogue_p): Likewise.
(mips32_in_function_epilogue_p): Likewise.
(mips_about_to_return): Likewise.
(mips_insn16_frame_cache): Pass architecture to mips16_scan_prologue.
(mips_insn32_frame_cache): Pass architecture to mips32_scan_prologue.
(mips_skip_prologue): Pass architecture to mips16_scan_prologue
and mips32_scan_prologue.
(mips_in_function_epilogue_p): Pass architecture to
mips16_in_function_epilogue_p and
mips32_in_function_epilogue_p.
(heuristic_proc_start): Pass architecture to mips_fetch_instruction
and mips_about_to_return.
(mips_skip_mips16_trampoline_code): Pass architecture to
mips_fetch_instruction.
(fetch_mips_16): Add GDBARCH parameter.
(mips16_next_pc): Pass architecture to fetch_mips_16.
(extended_mips16_next_pc): Pass architecture to unpack_mips16 and
fetch_mips_16.
* objc-lang.c (read_objc_method, read_objc_methlist_nmethods,
read_objc_methlist_method, read_objc_object, read_objc_super,
read_objc_class): Add GDBARCH parameter.
(find_implementation_from_class): Add GDBARCH parameter, pass
to read_objc_class, read_objc_methlist_nmethods, and
read_objc_methlist_method.
(find_implementation): Add GDBARCH parameter, pass to
read_objc_object and find_implementation_from_class.
(resolve_msgsend, resolve_msgsend_stret): Pass architecture
to find_implementation.
(resolve_msgsend_super, resolve_msgsend_super_stret): Pass
architecture to read_objc_super and find_implementation_from_class.
* ppc64-linux-tdep.c (ppc64_desc_entry_point): Add GDBARCH parameter.
(ppc64_standard_linkage1_target, ppc64_standard_linkage2_target,
ppc64_standard_linkage3_target): Pass architecture to
ppc64_desc_entry_point.
* rs6000-tdep.c (bl_to_blrl_insn_p): Add BYTE_ORDER parameter.
(skip_prologue): Pass byte order to bl_to_blrl_insn_p.
(rs6000_fetch_instruction): Add GDBARCH parameter.
(rs6000_skip_stack_check): Add GDBARCH parameter, pass to
rs6000_fetch_instruction.
(skip_prologue): Pass architecture to rs6000_fetch_instruction.
* remote-mips.c (mips_store_word): Return old_contents as host
integer value instead of target bytes.
* s390-tdep.c (struct s390_prologue_data): Add BYTE_ORDER member.
(s390_analyze_prologue): Initialize it.
(extend_simple_arg): Add GDBARCH parameter.
(s390_push_dummy_call): Pass architecture to extend_simple_arg.
* scm-lang.c (scm_get_field): Add BYTE_ORDER parameter.
* scm-lang.h (scm_get_field): Add BYTE_ORDER parameter.
(SCM_CAR, SCM_CDR): Pass SCM_BYTE_ORDER to scm_get_field.
* scm-valprint.c (scm_scmval_print): Likewise.
(scm_scmlist_print, scm_ipruk, scm_scmval_print): Define
SCM_BYTE_ORDER.
* sh64-tdep.c (look_for_args_moves): Add GDBARCH parameter.
(sh64_skip_prologue_hard_way): Add GDBARCH parameter, pass to
look_for_args_moves.
(sh64_skip_prologue): Pass architecture to
sh64_skip_prologue_hard_way.
* sh-tdep.c (sh_analyze_prologue): Add GDBARCH parameter.
(sh_skip_prologue): Pass architecture to sh_analyze_prologue.
(sh_frame_cache): Likewise.
* solib-irix.c (extract_mips_address): Add GDBARCH parameter.
(fetch_lm_info, irix_current_sos, irix_open_symbol_file_object):
Pass architecture to extract_mips_address.
* sparc-tdep.h (sparc_fetch_wcookie): Add GDBARCH parameter.
* sparc-tdep.c (sparc_fetch_wcookie): Add GDBARCH parameter.
(sparc_supply_rwindow, sparc_collect_rwindow): Pass architecture
to sparc_fetch_wcookie.
(sparc32_frame_prev_register): Likewise.
* sparc64-tdep.c (sparc64_frame_prev_register): Likewise.
* sparc32nbsd-tdep.c (sparc32nbsd_sigcontext_saved_regs): Likewise.
* sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_saved_regs): Likewise.
* spu-tdep.c (spu_analyze_prologue): Add GDBARCH parameter.
(spu_skip_prologue): Pass architecture to spu_analyze_prologue.
(spu_virtual_frame_pointer): Likewise.
(spu_frame_unwind_cache): Likewise.
(info_spu_mailbox_list): Add BYTE_ORER parameter.
(info_spu_mailbox_command): Pass byte order to info_spu_mailbox_list.
(info_spu_dma_cmdlist): Add BYTE_ORER parameter.
(info_spu_dma_command, info_spu_proxydma_command): Pass byte order
to info_spu_dma_cmdlist.
* symfile.c (read_target_long_array): Add GDBARCH parameter.
(simple_read_overlay_table, simple_read_overlay_region_table,
simple_overlay_update_1): Pass architecture to read_target_long_array.
* v850-tdep.c (v850_analyze_prologue): Add GDBARCH parameter.
(v850_frame_cache): Pass architecture to v850_analyze_prologue.
* xstormy16-tdep.c (xstormy16_analyze_prologue): Add GDBARCH
parameter.
(xstormy16_skip_prologue, xstormy16_frame_cache): Pass architecture
to xstormy16_analyze_prologue.
(xstormy16_resolve_jmp_table_entry): Add GDBARCH parameter.
(xstormy16_find_jmp_table_entry): Likewise.
(xstormy16_skip_trampoline_code): Pass architecture to
xstormy16_resolve_jmp_table_entry.
(xstormy16_pointer_to_address): Likewise.
(xstormy16_address_to_pointer): Pass architecture to
xstormy16_find_jmp_table_entry.
* xtensa-tdep.c (call0_track_op): Add GDBARCH parameter.
(call0_analyze_prologue): Add GDBARCH parameter, pass to
call0_track_op.
(call0_frame_cache): Pass architecture to call0_analyze_prologue.
(xtensa_skip_prologue): Likewise.
2009-07-02 17:25:59 +00:00
Ulrich Weigand
a6d9a66e23
* breakpoint.h (struct breakpoint): New member GDBARCH.
...
* breakpoint.c: Include "arch-utils.h".
(set_raw_breakpoint_without_location): Add GDBARCH parameter.
Use it to set breakpoint architecture.
(set_raw_breakpoint): Add GDBARCH parameter.
(create_internal_breakpoint): Likewise.
(create_catchpoint): Likewise.
(create_fork_vfork_event_catchpoint): Likewise.
(create_breakpoint): Likewise.
(create_breakpoints): Likewise.
(break_command_really): Likewise.
(create_ada_exception_breakpoint): Likewise.
Update local callers to pass architecture:
(create_internal_breakpoint): Update.
(create_overlay_event_breakpoint): Update.
(create_longjmp_master_breakpoint): Update.
(create_thread_event_breakpoint): Update.
(create_solib_event_breakpoint): Update.
(create_catchpoint): Update.
(create_fork_vfork_event_catchpoint): Update.
(set_momentary_breakpoint): Update.
(clone_momentary_breakpoint): Update.
(create_breakpoint): Update.
(create_breakpoints): Update.
(break_command_really): Update.
(break_command_1): Update.
(set_breakpoint): Update.
(watch_command_1): Update.
(catch_fork_command_1): Update.
(catch_exec_commnd_1): Update.
(handle_gnu_v3_exceptions): Update.
(create_ada_exception_breakpoint): Update.
(catch_ada_exception_command): Update.
(catch_assert_command): Update.
(trace_command): Update.
* breakpoint.h (struct bp_location): New member GDBARCH.
* breakpoint.c (get_sal_arch): New function.
(set_raw_breakpoint): Set location architecture.
(add_location_to_breakpoint): Likewise.
(clone_momentary_breakpoint): Likewise.
(watch_command_1): Likewise.
(update_watchpoint): Likewise.
(bp_loc_is_permanent): Use location architecture instead of
current_gdbarch.
(adjust_breakpoint_address): Add GDBARCH parameter; use it
instead of current_gdbarch.
Update callers of adjust_breakpoint_address to pass
breakpoint location architecture:
(set_raw_breakpoint): Update.
(watch_command_1): Update.
* tracepoint.c: (collect_symbol): Add GDBARCH parameter, use instead
of current_gdbarch.
(add_local_symbols): Add GDBARCH parameter. Pass to collect_symbol.
(encode_actions): Pass tracepoint architecture to add_local_symbols
(encode_actions): Use tracepoint architecture instead of
current_gdbarch. Pass it to add_local_symbols and collect_symbol.
* breakpoint.h (struct breakpoint_ops): Replace last_addr parameter
of print_one callback with last_loc.
* breakpoint.c (print_one_breakpoint_location): Replace last_addr
parameter with last_loc.
(print_one_breakpoint): Likewise.
(do_captured_breakpoint_query): Update call.
(breakpoint_1): Pass last_loc instead of last_addr to
print_one_breakpoint. Pass last location architecture instead of
current_gdbarch to set_next_address.
Update all implementations of the print_one callback:
* breakpoint.c (print_one_catch_fork): Update.
(print_one_catch_vfork): Update.
(print_one_catch_exec): Update.
(print_one_exception_catchpoint): Update.
* ada-lang.c (print_one_exception): Update.
(print_one_catch_exception): Update.
(print_one_catch_exception_unhandled): Update.
(print_one_catch_assert): Update.
* breakpoint.c (print_one_breakpoint_location): Add PRINT_ADDRESS_BITS
parameter. Use it instead of gdbarch_addr_bit (current_gdbarch).
(print_one_breakpoint): Add PRINT_ADDRESS_BITS parameter and pass it
to print_one_breakpoint_location.
(breakpoint_address_bits): New function.
(do_captured_breakpoint_query): Compute number of address bits to print
and pass it to print_one_breakpoint.
(breakpoint_1): Likewise. Use it instead of current_gdbarch.
* breakpoint.h (create_thread_event_breakpoint): Add GDBARCH.
* breakpoint.c (create_thread_event_breakpoint): Likewise.
Update callers to create_thread_event_breakpoint:
* aix-thread.c (pd_enable): Update.
* linux-thread-db.c (enable_thread_event): Update.
* breakpoint.h (create_solib_event_breakpoint): Add GDBARCH.
* breakpoint.c (create_solib_event_breakpoint): Likewise.
Update callers to create_solib_event_breakpoint:
* solib-frv.c (enable_break, enable_break2): Update.
* solib-pa64.c (pa64_solib_create_inferior_hook): Update.
* solib-som.c (som_solib_create_inferior_hook): Update.
* solib-darwin.c (darwin_solib_create_inferior_hook): Update.
* solib-svr4.c (enable_break): Update.
* breakpoint.h (insert_single_step_breakpoint): Add GDBARCH.
* breakpoint.c (insert_single_step_breakpoint): Likewise.
Update callers to insert_single_step_breakpoint:
* alpha-tdep.c (alpha_software_single_step): Update.
* arm-linux-tdep.c (arm_linux_software_single_step): Update.
* arm-tdep.c (arm_software_single_step): Update.
* cris-tdep.c (cris_software_single_step): Update.
* rs6000-aix-tdep.c (rs6000_software_single_step): Update.
* rs6000-tdep.c (ppc_deal_with_atomic_sequence): Update.
* sparc-tdep.c (sparc_software_single_step): Update.
* spu-tdep.c (spu_software_single_step): Update.
* mips-tdep.c (deal_with_atomic_sequence): Add GDBARCH parameter.
Pass it to insert_single_step_breakpoint.
(mips_software_single_step): Pass architecture to
deal_with_atomic_sequence and insert_single_step_breakpoint.
* breakpoint.h (deprecated_insert_raw_breakpoint): Add GDBARCH.
(deprecated_remove_raw_breakpoint): Likewise.
* breakpoint.c (deprecated_insert_raw_breakpoint): Add GDBARCH.
(deprecated_remove_raw_breakpoint): Likewise.
Update callers to deprecated_insert_raw_breakpoint and
deprecated_remove_raw_breakpoint:
* breakpoint.c (single_step_gdbarch): New static variable.
(insert_single_step_breakpoint): Pass GDBARCH parameter to
deprecated_insert_raw_breakpoint. Store it in single_step_gdbarch.
(remove_single_step_breakpoints): Pass architecture stored in
single_step_gdbarch to deprecated_remove_raw_breakpoint.
* rs6000-nat.c (exec_one_dummy_insn): Update.
* solib-irix.c (enable_break, disable_break): Update.
* procfs.c (procfs_mourn_inferior): Update.
(remove_dbx_link_breakpoint): Update.
* breakpoint.h (set_breakpoint): Add GDBARCH parameter.
(set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise.
* breakpoint.c (set_breakpoint): Add GDBARCH parameter.
(set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise.
Update callers to set_breakpoint, set_momentary_breakpoint and
set_momentary_breakpoint_at_pc:
* breakpoint.c (set_momentary_breakpoint_at_pc): Update.
(until_break_command): Update.
* infcall.c (call_function_by_hand): Update.
* infcmd.c (finish_backward, finish_forward): Update.
* infrun.c (insert_step_resume_breakpoint_at_sal): Add GDBARCH
parameter. Pass it to set_momentary_breakpoint.
(insert_longjmp_resume_breakpoint): Add GDBARCH parameter.
Pass it to set_momentary_breakpoint_at_pc.
(handle_inferior_event): Update.
(insert_step_resume_breakpoint_at_frame): Update.
(insert_step_resume_breakpoint_at_caller): Update..
* mi/mi-cmd-break.c: Include "arch-utils.h".
(mi_cmd_break_insert): Update.
* target.h (struct target_ops): Add GDBARCH parameter to
to_insert_breakpoint, to_remove_breakpoint, to_insert_hw_breakpoint,
and to_remove_hw_breakpoint members.
(target_insert_breakpoint, target_remove_breakpoint,
target_insert_hw_breakpoint, target_remove_hw_breakpoint): Add GDBARCH
parameter, pass to target routine.
(memory_remove_breakpoint, memory_insert_breakpoint): Add GDBARCH
parameter.
* target.c (debug_to_insert_breakpoint, debug_to_remove_breakpoint,
debug_to_insert_hw_breakpoint, debug_to_remove_hw_breakpoint): Add
GDBARCH parameter, pass to target routine.
(update_current_target): Update function signature.
* breakpoint.c (insert_bp_location, remove_breakpoint,
deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint):
Pass architecture to target_ routines.
Update all implementations of the target breakpoint routines to take
GDBARCH parameter and use it instead of GDBARCH as appropriate:
* corelow.c (ignore): Update.
* exec.c (ignore): Update.
* mem-break.c (memory_insert_breakpoint): Update.
(memory_remove_breakpoint): Update.
* monitor.c (monitor_insert_breakpoint): Update.
(monitor_remove_breakpoint): Update.
* record.c (record_insert_breakpoint): Update.
(record_beneath_to_insert_breakpoint): Update.
(record_remove_breakpoint): Update.
(record_beneath_to_remove_breakpoint): Update.
* remote.c (remote_insert_breakpoint): Update.
(remote_remove_breakpoint): Update.
(remote_insert_hw_breakpoint): Update.
(remote_remove_hw_breakpoint): Update.
* remote-m32r-sdi.c (m32r_insert_breakpoint): Update.
(m32r_remove_breakpoint): Update.
* remote-mips.c (mips_insert_breakpoint): Update.
(mips_remove_breakpoint): Update.
* i386-nat.c (i386_insert_hw_breakpoint): Update.
(i386_remove_hw_breakpoint): Update.
* nto-procfs.c (procfs_insert_breakpoint): Update.
(procfs_remove_breakpoint): Update.
(procfs_insert_hw_breakpoint): Update.
(procfs_remove_hw_breakpoint): Update.
doc/ChangeLog:
* gdbint.texi (Examples of Use of @code{ui_out} functions):
Update example code extrated from breakpoint.c.
2009-07-02 17:12:28 +00:00
Ulrich Weigand
a97b0ac8cf
* ada-tasks.c (read_known_tasks_array): Use target_gdbarch instead
...
of current_gdbarch.
* aix-thread.c (pd_enable): Likewise.
* amd64-linux-nat.c (ps_get_thread_area): Likewise.
* bsd-uthread.c (bsd_uthread_activate): Likewise.
* linux-nat.c (linux_nat_info_proc_cmd): Likewise.
* linux-thread-db.c (enable_thread_event): Likewise.
* monitor.c (monitor_write_memory, monitor_read_memory): Likewise.
* nto-procfs.c (procfs_open): Likewise.
* procfs.c (invalidate_cache, procfs_insert_watchpoint,
info_proc_mappings, info_mappings_callback): Likewise.
* record.c (record_open): Likewise.
* rs6000-nat.c (ARCH64): Likewise.
* solib-darwin.c (darwin_solib_create_inferior_hook): Likewise.
(darwin_bfd_open): Likewise.
* memattr.c (mem_info_command): Likewise.
* windows-nat.c (win32_resume): Use current regcache architecture
instead of current_gdbarch.
* dbug-rom.c (dbug_regname): Remove check against number of
registers in current_gdbarch.
* solib-pa64.c (read_dynamic_info): Remove unused variable.
2009-06-17 18:44:23 +00:00
Pedro Alves
d1a7880c77
2009-06-07 Pedro Alves <pedro@codesourcery.com>
...
* procfs.h: New.
* proc-utils.h (procfs_first_available): Don't declare here.
* sol-thread.c: Include procfs.h instead of sys/procfs.h and
proc-utils.h.
* procfs.c: Include procfs.h.
(procfs_target): Make it public. Don't register
procfs_can_use_hw_breakpoint here.
(proc_set_watchpoint): Check for PCWATCH or PIOCSWATCH being
defined instead of TARGET_HAS_HARDWARE_WATCHPOINTS.
(procfs_can_use_hw_breakpoint): Remove check of
TARGET_HAS_HARDWARE_WATCHPOINTS.
(procfs_use_watchpoints): Register procfs_can_use_hw_breakpoint
here.
(_initialize_procfs): Don't add the procfs target here.
* i386-sol2-nat.c: Include target.h and procfs.h.
(_initialize_amd64_sol2_nat): Install the procfs target here,
customized with watchpoints support.
* irix5-nat.c: Include target.h.
(_initialize_core_irix5): Rename to ...
(_initialize_irix5_nat): ... this. Install the procfs target
here, customized with watchpoints support.
* alpha-nat.c: Include procfs.h.
(_initialize_core_alpha): Rename to...
(_initialize_alpha_nat): ... this. Install the procfs target
here, customized with watchpoints support.
* sparc-sol2-nat.c: Include target.h and procfs.h.
(_initialize_sparc_sol2_nat): New.
* config/i386/nm-i386sol2.h (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete.
* config/sparc/nm-sol2.h (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete.
* config/mips/irix5.mh (NAT_FILE): Delete.
* config/mips/irix6.mh (NAT_FILE): Delete.
* config/mips/nm-irix5.h: Delete.
2009-06-07 Pedro Alves <pedro@codesourcery.com>
* gdbint.texinfo (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete all
references.
2009-06-07 22:33:25 +00:00
Pedro Alves
09d3bde977
* inferior.h (proc_iterate_over_mappings): Delete declaration.
...
* nto-tdep.h (proc_iterate_over_mappings): Delete declaration.
* procfs.c (proc_iterate_over_mappings): Delete.
2009-06-07 17:58:24 +00:00
Pierre Muller
4fcbb49441
* procfs.c (procfs_wait): Add options parameter.
2009-05-25 12:28:57 +00:00
Pedro Alves
7e1789f556
* inflow.h (our_process_group): Remove declaration.
...
(inferior_process_group): Delete global variable declaration.
(inferior_process_group): New function declaration.
* inflow.c: Include observer.h.
(inferior_ttystate, our_ttystate, tflags_inferior, tflags_ours):
Delete.
(struct terminal_info): New struct.
(our_terminal_info): New global.
(inferior_process_group): New function.
(inferior_thisrun_terminal): Extend description comment.
(gdb_has_a_terminal): Adjust to write to our_terminal_info fields
instead of globals.
(terminal_init_inferior_with_pgrp): Adjust to per-inferior
terminal settings.
(terminal_inferior): Ditto.
(terminal_ours_1): Ditto.
(inflow_new_inferior, inflow_inferior_exit): New functions.
(child_terminal_info): Adjust to per-inferior terminal settings.
(osig_set): New global.
(set_sigint_trap): Adjust to per-inferior terminal settings. Set
or clear `osig_set' accordingly.
(clear_sigint_trap): Check `osig_set' to decide wheater to restore
SIGINT handler, instead of checking the current inferior (which
may be none).
(_initialize_inflow): Attach inflow_new_inferior and
inflow_inferior_exit to the "new_inferior" and "inferior_exit"
notifications, respectively.
* inferior.h (struct terminal_info): Forward declare.
(struct inferior): Add `terminal_info' field.
* inferior.c (delete_inferior_1): Notify the inferior_exit
observers before removing the inferior from the lists and deleting
it.
* inf-ptrace.c (inf_ptrace_stop): `inferior_process_group' is now
a function instead of a variable. Adjust.
* procfs.c (procfs_stop): Ditto.
2009-05-18 00:58:38 +00:00
Pierre Muller
d92524f1ee
Unify target macros.
...
* target.h (STOPPED_BY_WATCHPOINT): Delete, replaced by ...
(target_stoppped_by_watchpoint): New macro.
(HAVE_STEPPABLE_WATCHPOINT): Delete, replaced by ...
(target_have_steppable_watchpoint): New macro.
(HAVE_CONTINUABLE_WATCHPOINT): Delete, replace by ...
(target_have_continuable_watchpoint): New macro.
(TARGET_CAN_USE_HARDWARE_WATCHPOINT):Delete, replaced by ...
(target_can_use_hardware_watchpoint): New macro.
(TARGET_REGION_OK_FOR_HW_WATCHPOINT):Delete, replaced by ...
(target_region_ok_for_hw_watchpoint): New macro.
* breakpoint.c (update_watchpoint): Use new macros.
(bpstat_alloc): Likewise.
(create_breakpoint): Likewise.
(watch_command_1): Likewise.
(can_use_hardware_watchpoint): Likewise.
(do_enable_breakpoint): Likewise.
* infrun.c (handle_inferior_event): Adapt to new macros.
* mips-tdep.c (mips_gdbarch_init): Update comments.
* procfs.c (procfs_set_watchpoint): Update comment.
(procfs_insert_watchpoint): Adapt to new macros.
* remote-m32r-sdi.c (m32r_stop):
* remote-mips.c (mips_remove_breakpoint):
* target.c (debug_to_region_ok_for_hw_watchpoint): Update to new macros.
(debug_to_stopped_by_watchpoint): Likewise.
2009-05-11 11:13:09 +00:00
Pedro Alves
25513619db
* procfs.c (procfs_insert_watchpoint, procfs_remove_watchpoint)
...
(procfs_region_ok_for_hw_watchpoint, procfs_use_watchpoints): New
functions.
(procfs_stopped_by_watchpoint): Made static, ptid argument
removed.
(_initialize_procfs): Register new watchpoint related target
functions.
* config/i386/nm-i386sol2.h (TARGET_CAN_USE_HARDWARE_WATCHPOINT)
(TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT, STOPPED_BY_WATCHPOINT)
(HAVE_CONTINUABLE_WATCHPOINT): Delete.
(target_insert_watchpoint, target_remove_watchpoint): Delete.
(procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
declarations.
* config/mips/nm-irix5.h (STOPPED_BY_WATCHPOINT)
(TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT): Delete.
(target_insert_watchpoint, target_remove_watchpoint): Delete.
(procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
declarations.
* config/sparc/nm-sol2.h (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT)
(HAVE_CONTINUABLE_WATCHPOINT, STOPPED_BY_WATCHPOINT): Delete.
(target_insert_watchpoint, target_remove_watchpoint): Delete.
(procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
declarations.
2009-05-06 17:18:57 +00:00
Ulrich Weigand
fb14de7bbd
* inferior.h (read_pc, write_pc): Remove.
...
* regcache.c (read_pc, write_pc): Remove.
* infrun.c (displaced_step_fixup): Use regcache_read_pc instead
of read_pc.
(handle_inferior_event): Use regcache_read_pc instead of read_pc
when determining value of stop_pc. Replace subsequent uses of
read_pc by inspecting already-retrieved stop_pc value.
(keep_going): Use regcache_read_pc instead of read_pc.
* breakpoint.c (watchpoint_check): Use current frame architecture
and PC instead of current_gdbarch and read_pc ().
* tracepoint.c (set_traceframe_context): Replace PC argument
with FRAME argument.
(trace_start_command, finish_tfind_command): Update calls.
(finish_tfind_command): Compare frame IDs to identify transitions
between frames.
(trace_find_pc_command): Use regcache_read_pc instead of read_pc.
* rs6000-nat.c (exec_one_dummy_insn): Pass in regcache instead
of gdbarch. Use regcache_read_pc and regcache_write_pc instead
of read_pc and write_pc.
(store_register): Make regcache argument non-const. Update call
to exec_one_dummy_insn.
* thread.c (switch_to_thread): Use regcache_read_pc instead of read_pc.
* infcmd.c (post_create_inferior): Likewise.
* solib-darwin.c (darwin_solib_create_inferior_hook): Likewise.
* solib-pa64.c (pa64_solib_create_inferior_hook): Likewise.
* solib-sunos.c (sunos_solib_create_inferior_hook): Likewise.
* solib-svr4.c (enable_break, svr4_relocate_main_executable): Likewise.
* linux-fork.c (fork_load_infrun_state): Likewise.
* hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Likewise.
* record.c (record_wait): Likewise.
* procfs.c (procfs_wait): Likewise.
* remote-mips.c (common_open, mips_wait): Likewise.
* remote-m32r-sdi.c (m32r_resume): Likewise.
* symfile.c (generic_load): Use regcache_write_pc instead of write_pc.
* monitor.c (monitor_create_inferior, monitor_load): Likewise.
* m32r-rom.c (m32r_load, m32r_upload_command): Likewise.
* remote-m32r-sdi.c (m32r_create_inferior, m32r_load): Likewise.
* remote-mips.c (mips_create_inferior, mips_load): Likewise.
* solib-darwin.c: Include "regcache.h".
* solib-pa64.c: Include "regcache.h".
* solib-svr4.c: Include "regcache.h.".
* symfile.c: Do not mention read_pc or write_pc in comments.
* dink32-rom.c: Likewise.
* m32r-rom.c: Likewise.
* mips-tdep.c: Likewise.
2009-05-05 13:24:49 +00:00
Joel Brobecker
bf75638ec1
Undo the following change. Not correct, after all:
...
* procfs.c (solib_mappings_callback, find_memory_regions_callback):
Fix a compilation warning on mips-irix due to casting from
a pointer of different size.
2009-04-16 18:41:40 +00:00
Joel Brobecker
37da21bceb
* procfs.c (solib_mappings_callback, find_memory_regions_callback):
...
Fix a compilation warning on mips-irix due to casting from
a pointer of different size.
2009-04-16 17:25:38 +00:00
Joel Brobecker
7d85a9c0e3
Add a target_ops parameter to the to_kill method in struct target_ops.
...
* target.h (struct target_ops): Add a "target_ops *" parameter to
method to_kill.
(target_kill): Remove macro. Add declaration.
* target.c (debug_to_kill): Delete, no longer necessary.
(target_kill): New function.
(update_current_target): Stop inheriting the to_kill method.
Do not de_fault it to no_process either.
(setup_target_debug): Do not set current_target.to_kill.
* gnu-nat.c, go32-nat.c, hpux-thread.c, inf-ptrace.c, inf-ttrace.c,
linux-nat.c, monitor.c, nto-procfs.c, procfs.c, remote-m32r-sdi.c,
remote-mips.c, remote-sim.c, remote.c, windows-nat.c: Update
accordingly.
2009-03-17 19:28:09 +00:00
Pedro Alves
28439f5ef7
* corelow.c (get_core_registers): Adjust.
...
(core_file_thread_alive): Rename to...
(core_thread_alive): ... this.
(core_pid_to_str): Try gdbarch_core_pid_to_str first.
(init_core_ops): Adjust.
(coreops_suppress_target): Delete.
(_initialize_corelow): Unconditionally add core_ops.
* procfs.c: Include "inf-child.h".
(procfs_ops): Delete.
(init_procfs_ops): Delete. Reimplement as...
(procfs_target): ... this, inheriting from inf-child.
(procfs_attach, procfs_detach, procfs_fetch_registers): Adjust.
(procfs_prepare_to_store): Delete.
(procfs_store_registers, procfs_resume): Adjust.
(procfs_open): Delete.
(procfs_suppress_run): Delete.
(procfs_can_run): Delete.
(procfs_mourn_inferior): Adjust.
(procfs_init_inferior): Add target_ops parameter. Adjust.
(procfs_create_inferior): Don't pass procfs_init_inferior to
fork_inferior. Instead call it after fork_inferior returns.
(procfs_find_new_threads): Adjust.
(_initialize_procfs): Adjust to use procfs_target instead of
init_procfs_ops.
* sol-thread.c (orig_core_ops, sol_core_ops): Delete.
(lwp_to_thread): Use target_thread_alive.
(sol_thread_open): Delete.
(sol_thread_attach): Delete.
(sol_thread_detach, sol_thread_resume, sol_thread_wait)
(sol_thread_fetch_registers, sol_thread_store_registers): Adjust
to use find_target_beneath.
(sol_thread_prepare_to_store, sol_thread_xfer_memory): Delete.
(sol_thread_xfer_partial): Adjust to use find_target_beneath.
(sol_thread_files_info, sol_thread_kill_inferior): Delete.
(check_for_thread_db): New.
(sol_thread_notice_signals, sol_thread_create_inferior): Delete.
(sol_thread_new_objfile): Call check_for_thread_db.
(sol_thread_mourn_inferior): Adjust to use find_target_beneath.
(sol_thread_can_run): Delete.
(sol_thread_alive): Adjust to use find_target_beneath.
(sol_thread_stop): Delete.
(rw_common): Use target_write_memory or target_read_memory.
(ps_lgetregs, ps_lgetfpregs): Use target_fetch_registers.
(ps_lsetregs, ps_lsetfpregs): Use target_store_registers.
(solaris_pid_to_str): Remove check for libthread_db initialization
failing.
(sol_find_new_threads): Remove check for libthread_db
initialization failing, or for an invalid inferior_ptid. Adjust
to use find_target_beneath.
(sol_core_open, sol_core_close, sol_core_detach,
sol_core_files_info, sol_find_memory_regions,
sol_make_note_section, ignore): Delete.
(init_sol_thread_ops): Make it a thread_stratum target. Remove
unneeded callback settings.
(init_sol_core_ops): Delete.
(_initialize_sol_thread): No longer call init_sol_core_ops, set
procfs_suppress_run, or hack with core_ops.
* target.h (struct target_ops): Add a target_ops * parameter to
to_resume, to_fetch_registers, to_store_registers, to_thread_alive
and to_find_new_threads.
(target_fetch_registers, target_store_registers)
(target_thread_alive, target_find_new_threads): Redeclare as
function.
* target.c (update_current_target): Do not inherit or de_fault
to_resume, to_fetch_registers, to_store_registers,
to_thread_alive, to_find_new_threads.
(target_resume): Adjust.
(target_thread_alive, target_find_new_threads): New.
(debug_to_resume, debug_to_fetch_registers): Delete.
(target_fetch_registers): New.
(debug_to_store_registers): Delete.
(target_store_registers): New.
(debug_to_thread_alive, debug_to_find_new_threads): Delete.
(setup_target_debug): Adjust.
* gdbcore.h (core_ops): Delete declaration.
* inf-ptrace.c, linux-nat.c, remote.c, amd64-linux-nat.c,
inf-child.c, linux-thread-db.c, bsd-uthread.c, inf-ttrace.c,
i386-sol2-tdep.c, darwin-nat.c, gnu-nat.c, go32-nat.c,
hpux-thread.c, i386-linux-nat.c, i386fbsd-nat.c, monitor.c,
nto-procfs.c, remote-m32r-sdi.c, remote-mips.c, windows-nat.c,
alphabsd-nat.c, amd64bsd-nat.c, arm-linux-nat.c, armnbsd-nat.c,
bsd-kvm.c, hppa-hpux-nat.c, hppa-linux-nat.c, hppabsd-nat.c,
hppanbsd-nat.c, i386-darwin-nat.c, i386bsd-nat.c,
ia64-linux-nat.c, m32r-linux-nat.c, m68kbsd-nat.c,
m68klinux-nat.c, m88kbsd-nat.c, mips-linux-nat.c,
mips64obsd-nat.c, mipsnbsd-nat.c, ppc-linux-nat.c, ppcnbsd-nat.c,
ppcobsd-nat.c, remote-sim.c, rs6000-nat.c, s390-nat.c,
shnbsd-nat.c, sparc-nat.c, sparc-nat.h, spu-linux-nat.c,
vaxbsd-nat.c, xtensa-linux-nat.c: Adjust to target_ops changes.
* gdbarch.sh (core_pid_to_str): New gdbarch callback.
* gdbarch.h, gdbarch.c: Regenerate.
* sol2-tdep.c: Include "inferior.h".
(sol2_core_pid_to_str): New.
* sol2-tdep.h (sol2_core_pid_to_str): Declare.
* amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
* sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
* sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
* i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
2009-02-23 00:03:50 +00:00
Pedro Alves
117de6a924
* linux-nat.c (linux_nat_wait): Adjust.
...
(linux_nat_pid_to_str): Adjust. Remove call to thread_db_init.
* linux-nat.h (thread_db_init): Delete declaration.
* linux-thread-db.c (target_beneath): Delete.
(thread_db_init): Delete.
(thread_db_detach): Use find_target_beneath.
(thread_db_wait): Adjust interface. Use find_target_beneath.
(thread_db_mourn_inferior): Use find_target_beneath.
(thread_db_can_async_p, thread_db_is_async_p, thread_db_async)
(thread_db_async_mask): Delete.
(thread_db_pid_to_str): Adjust interface. Use
find_target_beneath.
(thread_db_get_thread_local_address): Adjust interface. Use
find_target_beneath.
(init_thread_db_ops): Delete references to delete functions.
* target.c (update_current_target): Don't inherit or default
to_wait. Don't inherit to_pid_to_str and
to_get_thread_local_address.
(target_translate_tls_address): Look for a pushed target that
implements to_get_thread_local_address, and use it instead of
checking for target_get_thread_local_address_p.
(target_wait, target_pid_to_str): Reimplement as functions.
(dummy_pid_to_str): New.
(init_dummy_target): Register it.
(debug_to_wait): Delete.
* target.h (struct target_ops): Make to_wait, to_pid_to_str and
to_get_thread_local_address accept a pointer to struct target_ops.
(target_wait): Delete macro, and declare as function.
(target_pid_to_str): Likewise.
(target_get_thread_local_address)
(target_get_thread_local_address_p): Delete.
(noprocess): Add NORETURN and ATTR_NORETURN tags.
* inf-ptrace.c (inf_ptrace_wait): Adjust.
(inf_ptrace_pid_to_str): New.
(inf_ptrace_target): Use inf_ptrace_pid_to_str.
* aix-thread.c (aix_thread_wait, aix_thread_pid_to_str): Adjust.
* bsd-kvm.c (bsd_kvm_pid_to_str): Adjust.
* bsd-uthread.c (bsd_uthread_wait, bsd_uthread_pid_to_str):
Adjust.
* corelow.c (core_pid_to_str): Adjust.
* darwin-nat.c (darwin_wait, darwin_pid_to_str): Adjust.
* dec-thread.c (dec_thread_wait, dec_thread_pid_to_str): Adjust.
* gnu-nat.c (gnu_wait, gnu_pid_to_str): Adjust.
* go32-nat.c (go32_wait, go32_pid_to_str): Adjust.
* hpux-thread.c (hpux_thread_wait): Adjust.
* inf-ttrace.c (inf_ttrace_wait, inf_ttrace_pid_to_str): Adjust.
* monitor.c (monitor_wait, monitor_pid_to_str): Adjust.
* nto-procfs.c (procfs_wait, procfs_pid_to_str): Adjust.
* procfs.c (procfs_pid_to_str): Adjust.
* remote-m32r-sdi.c (m32r_wait, m32r_pid_to_str): Adjust.
* remote-mips.c (mips_wait): Adjust.
* remote-sim.c (gdbsim_wait, gdbsim_pid_to_str): Adjust.
* remote.c (remote_wait, remote_pid_to_str)
(remote_get_thread_local_address): Adjust.
* rs6000-nat.c (rs6000_wait): Adjust.
* sol-thread.c (procfs_pid_to_str): Adjust declaration.
(sol_thread_wait, solaris_pid_to_str): Adjust.
* spu-linux-nat.c (spu_child_wait): Adjust.
* windows-nat.c (windows_wait, windows_pid_to_str): Adjust.
2009-02-06 22:21:26 +00:00
Kazu Hirata
f6a96b83ac
* gdb/procfs.c (info_mappings_callback): Cast map->pr_size to
...
unsigned long.
2009-01-21 01:20:15 +00:00
Joel Brobecker
0fb0cc7590
Updated copyright notices for most files.
2009-01-03 05:58:08 +00:00
Vladimir Prus
136d6dae62
Kill pthread_ops_hack
...
* target.h (struct target_ops): Make to_attach, to_detach,
to_create_inferior and to_mourn_inferior accept a pointer
to struct target_ops.
(target_attach, target_create_inferior, target_create_inferior):
Convert from macros to function. Find the right target to
invoke a method of.
(find_default_attach, find_default_create_inferior): New parameter
ops.
* corefile.c (core_file_command): Pass target to to_detach.
* corelow.c (core_detach): Add 'ops' parameter.
* fork-child.c (fork_inferior): Return the pid. Allow
init_trace_fun to be NULL.
* inf-ptrace (ptrace_ops_hack): Remove.
(inf_ptrace_him): Remove, moving all logic into....
(inf_ptrace_create_inferior): ... here. Push the target
passed as parameter.
(inf_ptrace_mourn_inferior, inf_ptrace_attach, inf_ptrace_detach):
Push/pop target passed as parameter, no ptrace_ops_hack.
(inf_ptrace_target): Don't remember result.
* inferior.h (fork_inferior): Adjust prototype.
* linux-nat.c (linux_nat_create_inferior, linux_nat_attach)
(linux_nat_detach, linux_nat_mourn_inferior): New parameter ops.
Pass it to linux_ops target.
* linux-thread-db.c (thread_db_detach, thread_db_mourn_inferior):
New parameter ops. Pass it to the target beneath.
* remote.c (remote_mourn, extended_remote_mourn, remote_detach)
(extended_remote_create_inferior): New parameter ops. Pass it
further.
* target.c (debug_to_attach, debug_to_detach)
(debug_to_mourn_inferior): New parameter ops.
(target_create_inferior): New.
(update_current_target): Do not inherit to_attach, to_detach,
to_create_inferiour, to_mourn_inferior. Do not default
to_detach and to_mourn_inferior.
(target_detach): Find the right target to use.
(target_mourn_inferior): New.
(find_default_attach, find_default_create_inferior): New parameter
ops. Pass the found target when calling its method.
(init_dummy_target): Provide fallback definition of to_detach.
(target_attach): New.
(debug_to_attach, debug_to_detach, debug_to_create_inferior)
(debug_to_mourn_inferiour): New parameter ops.
* aix-thread.c: Adjust.
* bsd-uthread.c: Adjust.
* gnu-nat.c: Adjust.
* go32-nat.c: Adjust.
* hpux-thread.c: Adjust.
* inf-ttrace.c: Ajust.
* monitor.c: Adjust.
* nto-procfs.c: Adjust.
* procfs.c: Adjust.
* remote-m32r-sdi.c: Adjust.
* remote-mips.c: Adjust.
* remote-sim.c: Adjust.
* rs6000-nat.c: Adjust.
* sol-thread.c: Adjust.
* win32-nat.c: Adjust.
* dec-thread.c: Adjust.
2008-11-09 11:27:18 +00:00
Pedro Alves
0b62613e31
2008-10-09 Pedro Alves <pedro@codesourcery.com>
...
Make it compile without warnings.
* procfs.c (create_procinfo): Initialize `parent'.
(dead_procinfo): Pass a constant string as format to error.
(procfs_address_to_host_pointer): Add cast to gdb_type *.
(procfs_find_LDT_entry): Adjust format string to long int
ptid.tid.
(procfs_xfer_partial): Adjust prototype. Add gdb_byte* cast.
(procfs_xfer_memory): Adjust prototype.
(info_mappings_callback, info_proc_mappings): Adjust to not pass a
variable as printf_filtered format.
(procfs_make_note_section): Change type of auxv local to gdb_byte.
* Makefile.in: Remove special rule.
2008-10-09 13:49:13 +00:00
Paul Pluzhnikov
d1a4106143
2008-10-03 Paul Pluzhnikov <ppluzhnikov@google.com>
...
* utils.c, defs.h (gdb_buildargv): New fn. Wrap buildargv
and check for out-of-memory condition.
* exec.c (exec_file_command): Call it.
* infrun.c (handle_command, xdb_handle_command): Likewise.
* interps.c (interpreter_exec_cmd): Likewise.
* linux-nat.c (linux_nat_info_proc_cmd): Likewise.
* procfs.c (info_proc_cmd): Likewise.
* remote-mips.c (common_open): Likewise.
* remote-sim.c (gdbsim_kill, gdbsim_create_inferior)
(gdbsim_open): Likewise.
* remote.c (extended_remote_run, remote_put_command)
(remote_get_command, remote_delete_command): Likewise.
* ser-mingw.c (pipe_windows_open): Likesise.
* source.c (add_path, show_substitute_path_command)
(unset_substitute_path_command, set_substitute_path_command):
Likewise.
* stack.c (backtrace_command): Likewise.
* symfile.c (symbol_file_command, generic_load)
(add_symbol_file_command): Likesise.
* symmisc.c (maintenance_print_symbols, maintenance_print_psymbols)
(maintenance_print_msymbols): Likewise.
2008-10-03 16:36:10 +00:00
Pedro Alves
181e7f9393
Remove the attach_flag global, and make it per-inferior.
...
* inferior.h (attach_flag): Delete.
(inferior_process): Declare.
* solib.c (update_solib_list): Adjust.
* gnu-nat.c (gnu_create_inferior, gnu_attach): Adjust.
* inf-ptrace.c (inf_ptrace_detach): Adjust.
(inf_ptrace_files_info): Get it from the current inferior.
* inf-ttrace.c (inf_ttrace_attach): Adjust.
(inf_ttrace_files_info): Get it from the current
inferior.
* inflow.c (terminal_inferior, terminal_ours_1, set_sigint_trap)
(clear_sigint_trap): Get it from the current process.
* remote.c (extended_remote_attach_1)
(extended_remote_create_inferior_1): Adjust.
* top.c (quit_confirm, quit_target): Get it from the current inferior.
* procfs.c (do_detach): Adjust.
(procfs_wait): Get it from the event inferior.
(procfs_files_info): Get it from the current inferior.
* nto-procfs.c (procfs_files_info): Likewise.
(procfs_attach): Adjust. Set the attach_flag here.
(do_attach): Don't set it here.
(procfs_detach): Don't clear it.
(procfs_mourn_inferior): Don't clear it.
* solib-osf.c (osf_solib_create_inferior_hook): Adjust.
* target.c (attach_flag): Delete.
(generic_mourn_inferior): Don't clear it.
* win32-nat.c (get_win32_debug_event): Get it from the event
process.
(do_initial_win32_stuff): Add attaching argument. Set attach_flag
in the inferior accordingly.
(win32_attach): Don't set the attach_flag here. Pass 1 to
do_intial_win32_stuff.
(win32_files_info): Get it from the current inferior.
(win32_create_inferior): Dont clear attach_flag here. Pass 0 to
do_intial_win32_stuff.
2008-09-22 15:21:30 +00:00
Pedro Alves
7f9f62ba18
* gnu-nat.c (gnu_attach): Add process to inferiors table.
...
(gnu_detach): Remove it.
* go32-nat.c (go32_create_inferior): Add process to gdb's inferior
table.
* inf-ptrace.c (inf_ptrace_follow_fork): Delete and add inferiors
to inferior table accordingly.
(inf_ptrace_attach): Add new process to inferior table.
(inf_ptrace_detach): Remove it.
* inf-ttrace.c (inf_ttrace_follow_fork): Delete and add inferiors
to inferior table accordingly.
(inf_ttrace_attach): Add process to inferior table.
(inf_ttrace_detach): Remove it.
* linux-fork.c (init_fork_list): Delete any left over inferior.
(linux_fork_mourn_inferior, detach_fork_command): Also delete
processes from inferior list.
* monitor.c (monitor_open): Add process to inferior list.
(monitor_close): Remove it.
* nto-procfs.c (procfs_attach): Add process to inferior list.
Find threads after pushing the target.
(procfs_detach): Remove process from inferior list.
(procfs_create_inferior): Add process to inferior list.
* procfs.c (procfs_detach): Remove process from inferior list.
(do_attach): Add process to inferior list.
* remote-sim.c (sim_create_inferior): Add process to inferior list.
(gdbsim_close): Remove it.
* target.c (generic_mourn_inferior): If inferior_ptid is not
null_ptid, remove the corresponding inferior from inferior list.
* win32-nat.c (do_initial_win32_stuff): Add process to inferior list.
(win32_detach): Remove it.
* linux-nat.c (linux_child_follow_fork): Delete and add inferiors
to inferior list accordingly.
* fork-child.c (fork_inferior): Add process to inferior list.
* corelow.c (CORELOW_PID): Define.
(core_close): Remove core from inferior list.
(core_open): Add it.
2008-09-22 15:16:51 +00:00
Ulrich Weigand
4e906f53ab
* procfs.c (procfs_address_to_host_pointer): Use target_gdbarch
...
and its associated types to perform pointer conversion.
(procfs_can_use_hw_breakpoint): Likewise.
(procfs_auxv_parse): Remove unused variable.
2008-09-11 14:29:53 +00:00
Pedro Alves
2020b7abd8
Remove the global stop_signal in favour of a per-thread
...
stop_signal.
* inferior.h (stop_signal): Delete.
* gdbthread.h (save_infrun_state, load_infrun_state): Remove
stop_signal argument.
* thread.c (load_infrun_state, save_infrun_state): Remove
stop_signal argument. Don't reference it.
* infcmd.c (stop_signal): Delete.
(program_info): Adjust.
* infrun.c (resume): Clear stop_signal.
(proceed): Adjust. Pass the last stop_signal to the thread we're
resuming.
(context_switch): Don't context-switch stop_signal.
(handle_inferior_event, keep_going): Adjust.
(save_inferior_status, restore_inferior_status): Adjust.
* fbsd-nat.c: Include "gdbthread.h".
(find_signalled_thread, find_stop_signal): New.
(fbsd_make_corefile_notes): Use it.
* fork-child.c (startup_inferior): Adjust.
* linux-nat.c (get_pending_status): Adjust.
(linux_nat_do_thread_registers): Adjust.
(find_signalled_thread, find_stop_signal): New.
(linux_nat_do_thread_registers): Add stop_signal parameter.
(struct linux_nat_corefile_thread_data): Add stop_signal member.
(linux_nat_corefile_thread_callback): Pass stop_signal.
(linux_nat_do_registers): Delete.
(linux_nat_make_corefile_notes): Use find_stop_signal. Assume
there's always a thread.
* procfs.c (find_signalled_thread, find_stop_signal): New.
(find_stop_signal): New.
(procfs_do_thread_registers): Add stop_signal parameter.
(struct procfs_corefile_thread_data): Add stop_signal member.
(procfs_corefile_thread_callback): Pass args->stop_signal.
(procfs_make_note_section): Find the last stop_signal.
* solib-irix.c: Include gdbthread.h.
(irix_solib_create_inferior_hook): Adjust.
* solib-osf.c: Include gdbthread.h.
(osf_solib_create_inferior_hook): Adjust.
* solib-sunos.c: Include gdbthread.h.
(sunos_solib_create_inferior_hook): Adjust.
* solib-svr4.c: Include gdbthread.h.
(svr4_solib_create_inferior_hook): Adjust.
* win32-nat.c (do_initial_win32_stuff): Adjust.
2008-09-08 21:51:18 +00:00
Pedro Alves
2689673f45
* procfs.c (to_attach): Create a procinfo for the current lwp.
...
Add it to gdb's thread list.
(procfs_fetch_registers, procfs_store_registers): Assume there's
always an lwp.
(procfs_wait): Don't add the main thread here.
(procfs_init_inferior): Create a procinfo for the main lwp here.
Change main thread's ptid with thread_change_ptid.
(procfs_notice_thread): Check for exited threads.
(procfs_corefile_thread_callback): Remove check for the main
process.
(procfs_make_note_section): Assume there is always a thread.
* sol-thread.c (sol_thread_attach): Clear sol_thread_active before
attaching. Change the main thread ptid with thread_change_ptid.
(sol_thread_detach): Clear sol_thread_active.
(sol_thread_wait): Check for exited threads.
(sol_thread_create_inferior): Clear sol_thread_active before
creating a new inferior. Change the main thread ptid with
thread_change_ptid.
(sol_thread_mourn_inferior): Clear sol_thread_active.
(sol_find_new_threads_callback): Check for exited threads.
2008-09-08 21:31:54 +00:00
Pedro Alves
f9c72d524f
Adjust all targets to new target_stop interface.
...
* gnu-nat.c (gnu_stop): Add ptid argument.
* go32-nat.c (go32_stop): Add ptid argument.
(go32_create_inferior): Pass inferior_ptid to go32_stop.
* hpux-thread.c (hpux_thread_stop): Add ptid argument.
* monitor.c (monitor_stop): Add ptid argument.
(monitor_open): Pass inferior_ptid to monitor_stop.
(monitor_interrupt): Pass inferior_ptid to target_stop.
(monitor_stop): Add ptid argument.
* nto-procfs.c (nto_interrupt): Pass inferior_ptid to target_stop.
(procfs_create_inferior): Add ptid argument.
* procfs.c (procfs_stop): Add ptid argument.
* remote-m32r-sdi.c (m32r_stop): Add ptid argument.
* remote-sim.c (gdbsim_stop): Add ptid argument.
* sol-thread.c (sol_thread_stop): Add ptid argument.
* win32-nat.c (win32_stop): Add ptid argument.
2008-07-09 22:49:56 +00:00
Vladimir Prus
c47ffbe3b1
Fix auxv data parsing on 64-bit solaris
...
* target.h (struct target_ops): New field to_auxv_parse.
* auxv.c (default_auxv_parse): New, renamed from previous
target_auxv_parse.
(target_auxv_parse): Try to call target method. Fallback to
default_auxv_parse if not found.
* procfs.c (procfs_auxv_parse): New.
(init_procfs_ops): On Solaris, in 64-bit mode, install
procfs_auxv_parse.
2008-05-04 09:28:27 +00:00
Daniel Jacobowitz
17faa917e0
2008-03-21 Daniel Jacobowitz <dan@codesourcery.com>
...
* gdbthread.h (add_thread_with_info): New.
* linux-thread-db.c: Add some documentation.
(GET_LWP, GET_PID, GET_THREAD, is_lwp, is_thread, BUILD_LWP): Delete.
(struct private_thread_info): Remove th_valid and ti_valid.
Replace ti with tid.
(thread_get_info_callback): Do not add TID to the new ptid. Do
not cache th or ti.
(thread_db_map_id2thr, lwp_from_thread): Delete functions.
(thread_from_lwp): Assert that the LWP is set. Do not add TID to the
new PTID.
(attach_thread): Handle an already-existing thread. Use
add_thread_with_info. Cache the th and tid.
(detach_thread): Verify that private was set. Remove verbose
argument and printing. Update caller.
(thread_db_detach): Do not adjust inferior_ptid.
(clear_lwpid_callback, thread_db_resume, thread_db_kill): Delete.
(check_event, find_new_threads_callback): Do not add TID to the new PTID.
(thread_db_wait): Do not use lwp_from_thread.
(thread_db_pid_to_str): Use the cached TID.
(thread_db_extra_thread_info): Check that private is set.
(same_ptid_callback): Delete.
(thread_db_get_thread_local_address): Do not use it or check
is_thread. Check that private is set. Assume that the thread
handle is already cached.
(init_thread_db_ops): Remove to_resume and to_kill.
* thread.c (add_thread_with_info): New.
(add_thread): Use it.
* linux-nat.c (find_thread_from_lwp): Delete.
(exit_lwp): Do not use it. Check print_thread_events. Print before
deleting the thread.
(GET_PID, GET_LWP, BUILD_LWP, is_lwp): Move to...
* linux-nat.h (GET_PID, GET_LWP, BUILD_LWP, is_lwp): ...here.
* inf-ttrace.c (inf_ttrace_wait): Use print_thread_events and
printf_unfiltered for thread exits.
* procfs.c (procfs_wait): Likewise.
2008-03-21 Pedro Alves <pedro@codesourcery.com>
* gdb.threads/fork-child-threads.exp: Test next over fork.
2008-03-21 15:44:53 +00:00
Joel Brobecker
965b60eecb
* sol-thread.c: Replace use of TM_I386SOL2_H by an expression
...
that is true only on x86-solaris and x86_64-solaris.
* procfs.c: Likewise. Move procfs_find_LDT_entry up together
with proc_get_LDT_entry.
2008-03-12 20:00:21 +00:00
Michael Snyder
244e85c8df
2008-01-24 Michael Snyder <msnyder@specifix.com>
...
* procfs.c (procfs_xfer_partial): Comment, cut/paste error.
* win32-nat.c (win32_xfer_partial): Ditto.
* target.c (default_xfer_partial): Minor whitespace adjustment.
2008-01-25 00:09:50 +00:00
Vladimir Prus
93815fbfa5
Inform about new thread in a single place.
...
* thread.c (add_thread_silent): Renamed
from add_thread.
(print_thread_events): New variable definition.
(show_print_thread_events): New function.
(_initialize_thread): Add "set print thread-events" and
"show print thread-events" commands.
(add_thread): Announce new thread.
* gdbthread.h (add_thread_silent): Declare.
(print_thread_events): New variable declaration.
* inf-ttrace.c (inf_ttrace_wait): Don't
inform about new thread, as add_thread is always
called too, and will take care of that.
* infrun.c (handle_inferior_event): Likewise.
* procfs.c (procfs_wait): Likewise.
* remote.c (remote_currthread): Likewise.
* sol-thread.c (sol_thread_wait): Likewise.
* win32-nat.c (get_win32_debug_event): Likewise.
* linux-thread-db.c (attach_thread): Likewise.
Remove the verbose parameter.
(check_event): Make detach_thread be verbose
only if print_thread_events is set.
* linux-nat.c (lin_lwp_attach_lwp): Don't inform
about new thread. This is called only from
linux-thread-db.c:attach_thread, which will take care.
Remove the verbose parameter.
* linux-nat.h (lin_lwp_attach_lwp): Adjust prototype.
2008-01-23 11:26:29 +00:00
Daniel Jacobowitz
9b254dd1ce
Updated copyright notices for most files.
2008-01-01 22:53:26 +00:00
Joseph Myers
c162e8c9a4
2007-12-16 Daniel Jacobowitz <dan@codesourcery.com>
...
Joseph Myers <joseph@codesourcery.com>
* configure.ac: Check for *-*-solaris2.1[[0-9]]* instead of
*-*-solaris2.1[[0-9]].
* configure: Regenerate.
* procfs.c (proc_set_current_signal): If redelivering a signal,
reuse the current siginfo if possible.
testsuite:
* gdb.base/siginfo-addr.exp, gdb.base/siginfo-addr.c: New.
2007-12-16 22:19:21 +00:00
Markus Deuling
40a6adc1f8
2007-11-16 Markus Deuling <deuling@de.ibm.com>
...
* m32r-rom.c (m32r_supply_register): Use get_regcache_arch to get at
the current architecture by regcache.
* ppcnbsd-nat.c (ppcnbsd_supply_pcb): Likewise.
* ppc-linux-nat.c (fetch_altivec_register, fetch_spe_register)
(fetch_register, supply_vrregset, fetch_ppc_registers)
(store_altivec_register, store_spe_register, store_register)
(fill_vrregset, store_ppc_registers): Likewise.
* ppcobsd-nat.c (ppcobsd_supply_pcb): Likewise.
* win32-nat.c (do_win32_fetch_inferior_registers)
(do_win32_store_inferior_registers): Likewise.
* procfs.c (procfs_fetch_registers, procfs_store_registers): Likewise.
* remote-m32r-sdi.c (m32r_fetch_registers)
(m32r_store_registers): Likewise.
* remote-sim.c (gdbsim_fetch_register, gdbsim_store_register): Likewise.
* trad-frame.c (trad_frame_alloc_saved_regs): Replace current_gdbarch by
gdbarch.
* user-regs.c (user_reg_map_name_to_regnum): Likewise.
* ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call)
(do_ppc_sysv_return_value, ppc64_sysv_abi_push_dummy_call)
(ppc64_sysv_abi_return_value): Likewise.
* m32c-tdep.c (m32c_register_reggroup_p): Likewise.
* m2-lang.c (build_m2_types): Likewise.
* ppc-linux-tdep.c (ppc_linux_sigtramp_cache
* ppcnbsd-tdep.c (ppcnbsd_sigtramp_cache_init): Likewise.
* ppcobsd-tdep.c (ppcobsd_sigtramp_frame_cache): Likewise.
* rs6000-tdep.c (ppc_dwarf2_frame_init_reg): Likewise.
* m68hc11-tdep.c (m68hc11_frame_unwind_cache): Use get_frame_arch to
get at the current architecture by frame_info.
* gcore.c (derive_stack_segment): Likewise.
* shnbsd-nat.c (GETREGS_SUPPLIES): Add gdbarch parameter.
(shnbsd_fetch_inferior_registers, shnbsd_store_inferior_registers): Add
gdbarch to GETREGS_SUPPLIES call.
2007-11-16 04:53:46 +00:00
Joel Brobecker
a9762ec78a
Switch the license of all .c files to GPLv3.
...
Switch the license of all .h files to GPLv3.
Switch the license of all .cc files to GPLv3.
2007-08-23 18:08:50 +00:00
Ulrich Weigand
3e8c568d4f
2007-06-18 Markus Deuling <deuling@de.ibm.com>
...
* gdbarch.sh (SP_REGNUM): Replace by gdbarch_sp_regnum.
* v850-tdep.c (v850_unwind_sp): Likewise.
* std-regs.c (value_of_builtin_frame_sp_reg): Likewise.
* stack.c (frame_info): Likewise.
* stabsread.c (define_symbol): Likewise.
* sh-tdep.c (sh_push_dummy_call_fpu, sh_push_dummy_call_nofpu)
(sh_dwarf2_frame_init_reg, sh_frame_cache, sh_frame_prev_register)
(sh_unwind_sp): Likewise.
* sh64-tdep.c (sh64_push_dummy_call, sh64_frame_cache)
(sh64_frame_prev_register, sh64_unwind_sp): Likewise.
* rs6000-tdep.c (rs6000_push_dummy_call, rs6000_unwind_dummy_id)
(rs6000_frame_cache): Likewise.
* rs6000-nat.c (store_register): Likewise.
* remote-mips.c (mips_wait): Likewise.
* procfs.c (procfs_fetch_registers, procfs_store_registers): Likewise.
* ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call)
(ppc64_sysv_abi_push_dummy_call): Likewise.
* ppcobsd-tdep.c (ppcobsd_sigtramp_frame_cache): Likewise.
* ppcobsd-nat.c (ppcobsd_supply_pcb): Likewise.
* ppcnbsd-tdep.c (ppcnbsd_sigtramp_cache_init): Likewise.
* ppc-linux-tdep.c (ppc_linux_sigtramp_cache): Likewise.
* m32r-rom.c (m32r_supply_register): Likewise.
* frame.c (frame_sp_unwind): Likewise.
* mips-tdep.c (mips_insn16_frame_cache)
(mips_insn32_frame_cache): Likewise (comment).
* m68klinux-nat.c (supply_gregset): Likewise.
* m68k-tdep.c (m68k_get_longjmp_target): Likewise.
* ia64-tdep.c (ia64_frame_prev_register): Likewise.
* i386-tdep.c (i386_get_longjmp_target): Likewise.
* dwarf2-frame.c (dwarf2_frame_default_init_reg): Likewise.
* cris-tdep.c (cris_regnums, cris_sigcontext_addr)
(cris_sigtramp_frame_unwind_cache, cris_push_dummy_call)
(cris_scan_prologue, crisv32_scan_prologue, cris_unwind_sp)
(cris_register_type, crisv32_register_type)
(cris_dwarf2_frame_init_reg): Likewise.
* arch-utils.c (legacy_virtual_frame_pointer): Likewise.
* amd64-tdep.c (amd64_frame_prev_register): Likewise.
* amd64-linux-tdep.c (amd64_linux_sigcontext_addr): Likewise.
* libunwind-frame.c (libunwind_frame_cache): Likewise.
* gdbarch.sh (PC_REGNUM): Replace by gdbarch_pc_regnum.
* regcache.c (read_pc_pid, generic_target_write_pc): Likewise.
* xtensa-tdep.c (xtensa_register_type, xtensa_supply_gregset)
(xtensa_unwind_pc, xtensa_frame_cache, xtensa_frame_prev_register)
(xtensa_extract_return_value, xtensa_store_return_value): Likewise.
* v850-tdep.c (v850_unwind_pc): Likewise.
* stack.c (frame_info): Likewise.
* sh-tdep.c (sh_generic_show_regs, sh3_show_regs, sh2e_show_regs)
(sh2a_show_regs, sh2a_nofpu_show_regs, sh3e_show_regs)
(sh3_dsp_show_regs, sh4_show_regs, sh4_nofpu_show_regs)
(sh_dwarf2_frame_init_reg, sh_frame_prev_register, sh_unwind_pc)
(sh_dsp_show_regs): Likewise.
* shnbsd-tdep.c (shnbsd_supply_gregset)
(shnbsd_collect_gregset): Likewise.
* shnbsd-nat.c (GETREGS_SUPPLIES): Likewise.
* sh64-tdep.c (sh64_compact_reg_base_num, sh64_show_media_regs)
(sh64_frame_prev_register, sh64_unwind_pc): Likewise.
* rs6000-tdep.c (ppc_supply_gregset, ppc_collect_gregset)
(6000_register_reggroup_p, rs6000_unwind_pc)
(rs6000_frame_cache): Likewise.
* rs6000-nat.c (regmap, rs6000_fetch_inferior_registers)
(rs6000_store_inferior_registers): Likewise.
* remote-mips.c (mips_wait, mips_load): Likewise.
* procfs.c (procfs_fetch_registers, procfs_store_registers): Likewise.
* ppcobsd-tdep.c (ppcobsd_sigtramp_frame_cache): Likewise.
* ppcobsd-nat.c (ppcobsd_supply_pcb): Likewise.
* ppcnbsd-tdep.c (ppcnbsd_sigtramp_cache_init): Likewise.
* ppcnbsd-nat.c (getregs_supplies, ppcnbsd_supply_pcb): Likewise.
* ppc-linux-tdep.c (ppc_linux_sigtramp_cache): Likewise.
* ppc-linux-nat.c (ppc_register_u_addr, fetch_ppc_registers)
(store_ppc_registers, fill_gregset): Likewise.
* mips-tdep.c (mips_stub_frame_cache, mips_gdbarch_init): Likewise.
* mipsnbsd-tdep.c (mipsnbsd_supply_reg, mipsnbsd_fill_reg): Likewise.
* mipsnbsd-nat.c (getregs_supplies): Likewise.
* m68k-tdep.c (m68k_register_type, m68k_unwind_pc): Likewise.
* m68klinux-nat.c (supply_gregset): Likewise.
* irix5-nat.c (fill_gregset): Likewise.
* i386-tdep.c (i386_unwind_pc): Likewise.
* i386-linux-nat.c (i386_linux_resume): Likewise.
* frame.c (get_prev_frame_1): Likewise.
* dwarf2-frame.c (dwarf2_frame_default_init_reg): Likewise.
* dbug-rom.c (dbug_supply_register): Likewise.
* cris-tdep.c (cris_sigtramp_frame_unwind_cache, cris_scan_prologue)
(crisv32_scan_prologue, cris_unwind_pc, cris_register_size)
(cris_register_type, crisv32_register_type, crisv32_register_name)
(cris_dwarf2_frame_init_reg, find_step_target)
(cris_software_single_step, cris_supply_gregset)
(cris_regnums): Likewise.
* alpha-linux-nat.c (alpha_linux_register_u_offset): Likewise.
* aix-thread.c (special_register_p, supply_sprs64, supply_sprs32)
(fill_sprs64, fill_sprs32, store_regs_user_thread): Likewise.
* mips-linux-tdep.c (mips_linux_write_pc): Likewise.
* gdbarch.sh (PS_REGNUM): Replace by gdbarch_ps_regnum.
* dbug-rom.c (dbug_supply_register): Likewise.
* xtensa-tdep.c (xtensa_supply_gregset, xtensa_frame_cache)
(xtensa_frame_prev_register, xtensa_push_dummy_call): Likewise.
* win32-nat.c (win32_resume): Likewise.
* std-regs.c (value_of_builtin_frame_ps_reg)
(value_of_builtin_frame_pc_reg): Likewise.
* m68k-tdep.c (m68k_register_type): Likewise.
* m68klinux-nat.c (supply_gregset): Likewise.
* gdbarch.sh (FP0_REGNUM): Replace by gdbarch_fp0_regnum.
* sh-tdep.c (sh_extract_return_value_fpu, sh_store_return_value_fpu)
(sh2e_show_regs, sh2a_show_regs, sh3e_show_regs, sh4_show_regs)
(sh_sh2a_register_type, sh_sh3e_register_type, sh_sh4_register_type)
(fv_reg_base_num, dr_reg_base_num): Likewise.
* sh64-tdep.c (sh64_fv_reg_base_num, sh64_dr_reg_base_num)
(sh64_fpp_reg_base_num, sh64_compact_reg_base_num, sh64_push_dummy_call)
(sh64_extract_return_value, sh64_store_return_value)
(sh64_show_media_regs, sh64_show_compact_regs, sh64_register_type)
(sh64_do_fp_register, sh64_media_print_registers_info): Likewise.
* procfs.c (procfs_fetch_registers, procfs_store_registers)
(invalidate_cache): Likewise.
* ppc-linux-tdep.c (ppc_linux_sigtramp_cache): Likewise.
* mipsnbsd-tdep.c (mipsnbsd_supply_fpreg)
(mipsnbsd_fill_fpreg): Likewise.
* mipsnbsd-nat.c (mipsnbsd_fetch_inferior_registers)
(mipsnbsd_store_inferior_registers): Likewise.
* mips-linux-tdep.c (mips_supply_fpregset, mips_fill_fpregset)
(mips64_supply_fpregset, mips64_fill_fpregset): Likewise.
* mips-linux-nat.c (mips64_linux_register_addr): Likewise.
* m68k-tdep.c (m68k_register_type, m68k_convert_register_p): Likewise.
* m68klinux-nat.c (getfpregs_supplies, supply_fpregset)
(fill_fpregset): Likewise.
* irix5-nat.c (supply_fpregset, fill_fpregset): Likewise.
* i386-tdep.h (struct_return): Likewise (comment).
* i386-nto-tdep.c (i386nto_register_area): Likewise.
* go32-nat.c (fetch_register, go32_fetch_registers, store_register)
(go32_store_registers): Likewise.
* alpha-tdep.c (alpha_next_pc): Likewise.
* alpha-linux-nat.c (alpha_linux_register_u_offset): Likewise.
* alphabsd-nat.c (alphabsd_fetch_inferior_registers)
(alphabsd_store_inferior_registers): Likewise.
* core-regset.c (fetch_core_registers): Likewise.
* i386v4-nat.c (supply_fpregset, fill_fpregset): Likewise.
* gdbarch.c, gdbarch.h: Regenerate.
2007-06-18 17:45:26 +00:00
Ulrich Weigand
594f77850b
* regcache.c (struct regcache): Add ptid_t member.
...
(regcache_xmalloc): Initialize it.
(regcache_cpy_no_passthrough): Do not refer to current_regcache.
(regcache_dup): Likewise.
(regcache_dup_no_passthrough): Likewise.
(current_regcache): Make static.
(registers_ptid): Remove variable.
(get_thread_regcache): New function.
(get_current_regcache): New function.
(registers_changed): Implement by freeing current regcache.
(regcache_raw_read): Do not refer to current_regcache. Set
inferior_ptid to regcache->ptid while calling target routines.
(regcache_raw_write): Likewise.
(regcache_raw_supply): Do not refer to current_regcache.
(read_pc_pid): Use thread regcache. Do not modify inferior_ptid.
(write_pc_pid): Likewise.
(build_regcache): Remove.
(_initialize_regcache): Do not call DEPRECATED_REGISTER_GDBARCH_SWAP
or deprecated_register_gdbarch_swap. Do not initialize
registers_ptid.
* regcache.h (get_current_regcache): Add prototype.
(get_thread_regcache): Likewise.
(current_regcache): Remove declaration.
* corelow.c (core_open): Replace current_regcache by
get_current_regcache ().
* frame.c (frame_pop): Likewise.
(put_frame_register): Likewise.
(get_current_frame, create_new_frame): Likewise.
* mi/mi-main.c (mi_cmd_data_write_register_values): Likewise.
* stack.c (return_command): Likewise.
* infcall.c (call_function_by_hand): Likewise.
* infrun.c (resume): Likewise.
(save_inferior_status, restore_inferior_status): Likewise.
* linux-fork.c (fork_load_infrun_state): Likewise.
(fork_save_infrun_state): Likewise.
* win32-nat.c (win32_resume): Likewise.
* i386fbsd-nat.c (i386fbsd_resume): Likewise.
* monitor.c (monitor_wait): Likewise.
* remote.c (remote_wait): Likewise.
* remote-mips.c (mips_wait): Likewise.
* bsd-kvm.c (bsd_kvm_open): Likewise
(bsd_kvm_proc_cmd, bsd_kvm_pcb_cmd): Likewise.
* fbsd-nat.c (fbsd_make_corefile_notes): Likewise.
* i386-linux-nat.c (i386_linux_resume): Likewise.
* ia64-linux-nat.c (ia64_linux_insert_watchpoint): Likewise.
(ia64_linux_stopped_data_address): Likewise.
* frv-tdep.c (frv_fdpic_loadmap_addresses): Likewise.
* m32c-tdep.c (m32c_virtual_frame_pointer): Likewise.
* mep-tdep.c (current_me_module, current_options): Likewise.
* mips-tdep.c (deprecated_mips_set_processor_regs_hack): Likewise.
* linux-nat.c (linux_nat_do_thread_registers): Use thread
regcache instead of current_regcache. Call target_fetch_registers.
(linux_nat_corefile_thread_callback): Update call site.
(linux_nat_do_registers): Likewise.
* procfs.c (procfs_do_thread_registers): Use thread regcache instead
of current_regcache.
(procfs_make_note_section): Likewise.
* proc-service.c (ps_lgetregs, ps_lsetregs): Likewise.
(ps_lgetfpregs, ps_lsetfpregs): Likewise.
* sol-thread.c (ps_lgetregs, ps_lsetregs): Likewise.
(ps_lgetfpregs, ps_lsetfpregs): Likewise.
2007-06-16 17:16:26 +00:00
Ulrich Weigand
17a912b682
2007-06-13 Markus Deuling <deuling@de.ibm.com>
...
* gdbarch.sh (TARGET_ADDR_BIT): Replace by gdbarch_addr_bit.
* valops.c (value_cast): Likewise.
* utils.c (strlen_paddr, paddr, paddr_nz, paddress): Likewise.
* ui-out.c (ui_out_field_core_addr): Likewise.
* tracepoint.c (tracepoints_info): Likewise.
* symtab.c (print_msymbol_info): Likewise.
* solib-irix.c (irix_current_sos)
(irix_open_symbol_file_object): Likewise.
* remote.c (build_remote_gdbarch_data): Likewise.
* prologue-value.c (make_pv_area): Likewise.
* procfs.c (info_mappings_callback): Likewise.
* printcmd.c (print_scalar_formatted)
(deprecated_print_address_numeric): Likewise.
* memattr.c (mem_info_command): Likewise.
* linux-nat.c (linux_nat_info_proc_cmd): Likewise.
* gdbtypes.c (build_flt, gdbtypes_post_init): Likewise.
* exec.c (print_section_info): Likewise.
* dwarf2read.c (read_subrange_type): Likewise.
* dwarf2loc.c (find_location_expression): Likewise.
* dwarf2expr.c (dwarf2_read_address, unsigned_address_type)
(signed_address_type, execute_stack_op): Likewise.
* breakpoint.c (print_one_breakpoint, breakpoint_1): Likewise.
* gdbarch.c, gdbarch.h: Regenerate.
2007-06-13 17:59:51 +00:00
Ulrich Weigand
819844ad98
2007-06-13 Markus Deuling <deuling@de.ibm.com>
...
* gdbarch.sh (TARGET_PTR_BIT): Replace with gdbarch_ptr_bit.
* solib-svr4.c (svr4_truncate_ptr): Likewise.
* solib-pa64.c (read_dynamic_info): Likewise.
* solib-legacy.c (legacy_svr4_fetch_link_map_offsets): Likewise.
* solib.c (info_sharedlibrary_command): Likewise.
* s390-nat.c (SUBOFF): Likewise.
* p-valprint.c (pascal_val_print): Likewise.
* procfs.c (info_proc_mappings): Likewise.
* printcmd.c (decode_format): Likewise.
* nto-tdep.c (nto_truncate_ptr): Likewise.
* mips-linux-tdep.c (mips_linux_get_longjmp_target)
(mips64_linux_get_longjmp_target): Likewise.
* m68k-tdep.c (m68k_get_longjmp_target): Likewise.
* jv-valprint.c (java_value_print): Likewise.
* jv-lang.c (get_java_object_header_size): Likewise.
* hppa-tdep.c (skip_prologue_hard_way, hppa_frame_cache): Likewise.
* hppa-hpux-tdep.c (hppa_hpux_skip_trampoline_code)
(hppa_hpux_unwind_adjust_stub): Likewise.
* gnu-v3-abi.c (build_gdb_vtable_type): Likewise.
* gdbtypes.c (make_pointer_type, make_reference_type)
(smash_to_memberptr_type): Likewise.
* gdbarch.c, gdbarch.h: Regenerate.
2007-06-13 17:30:01 +00:00
Ulrich Weigand
76e713237b
2007-06-06 Markus Deuling <deuling@de.ibm.com>
...
* gdbarch.sh (ADDRESS_TO_POINTER): Replace by
gdbarch_address_to_pointer.
* findvar.c (store_typed_address): Likewise.
* gdbtypes.c (make_pointer_type): Likewise (comment).
* procfs.c (procfs_address_to_host_pointer): Likewise.
* std-regs.c (value_of_builtin_frame_reg): Likewise.
(value_of_builtin_frame_fp_reg): Likewise.
(value_of_builtin_frame_pc_reg): Likewise.
* utils.c (paddress): Likewise (comment).
* gdbarch.sh (POINTER_TO_ADDRESS): Replace by
gdbarch_pointer_to_address.
* findvar.c (extract_typed_address): Likewise.
* gdbtypes.c (make_pointer_type): Likewise (comment).
* valops.c (value_cast): Likewise (comment).
* gdbarch.c, gdbarch.h: Regenerate.
2007-06-06 15:23:06 +00:00
Ulrich Weigand
316f20603a
* target.h (struct target_ops): Add REGCACHE parameter to
...
to_prepare_to_store.
(target_prepare_to_store): Likewise.
* target.c (debug_to_prepare_to_store): Add REGCACHE parameter.
(update_current_target): Adapt prepare_to_store de_fault rule.
* regcache.c (regcache_raw_write): Pass regcache to
target_prepare_to_store.
* inftarg.c (child_prepare_to_store): Add REGCACHE parameter.
Do not call CHILD_PREPARE_TO_STORE.
* gnu-nat.c (gnu_prepare_to_store): Likewise.
* procfs.c (procfs_prepare_to_store): Likewise.
* inf-child.c (inf_child_prepare_to_store): Add REGCACHE parameter.
* go32-nat.c (go32_prepare_to_store): Likewise.
* monitor.c (monitor_prepare_to_store): Likewise.
* nto-procfs.c (procfs_prepare_to_store): Likewise.
* remote-m32r-sdi.c (m32r_prepare_to_store): Likewise.
* remote-mips.c (mips_prepare_to_store): Likewise.
* remote-sim.c (gdbsim_prepare_to_store): Likewise.
* win32-nat.c (win32_prepare_to_store): Likewise.
* remote.c (remote_prepare_to_store): Add REGCACHE parameter.
Use it instead of current_regcache.
* hpux-thread.c (hpux_thread_prepare_to_store): Add REGCACHE
parameter. Pass it on to next target.
* sol-thread.c (sol_thread_prepare_to_store): Likewise.
2007-05-06 18:55:41 +00:00
Ulrich Weigand
56be38147c
* target.h (struct regcache): Add forward declaration.
...
(struct target_ops): Add REGCACHE parameter to to_fetch_registers
and to_store_registers target operations.
(target_fetch_registers, target_store_registers): Update.
* regcache.c (regcache_raw_read): Replace register_cached by
regcache_valid_p. Pass regcache to target_fetch_registers.
(regcache_raw_write): Pass regcache to target_store_registers.
* arm-linux-nat.c (store_fpregister, store_fpregs, store_register,
store_regs, store_wmmx_regs): Replace register_cached by
regcache_valid_p.
* bsd-kvm.c (bsd_kvm_open, bsd_kvm_proc_cmd): Pass current_regcache
to target_fetch_registers calls.
* corelow.c (core_open): Likewise.
* linux-nat.c (linux_nat_corefile_thread_callback): Likewise.
* proc-service.c (ps_lgetregs, ps_lsetregs, ps_lgetfpregs,
ps_lsetfpregs): Likewise.
* sol-thread.c (ps_lgetregs, ps_lsetregs, ps_lgetfpregs,
ps_lsetfpregs): Likewise.
* win32-nat.c (win32_resume): Likewise.
* ia64-tdep.c (ia64_store_return_value): Pass current_regcache
to target_store_registers call.
* rs6000-tdep.c (rs6000_push_dummy_call): Likewise.
* inferior.h (store_inferior_registers): Update prototype.
(fetch_inferior_registers): Likewise.
* gnu-nat.c (gnu_store_registers, gnu_fetch_registers): Likewise.
* mips-linux-nat.c (super_fetch_registers, super_store_registers):
Update function pointer signatures.
* aix-thread.c (aix_thread_fetch_registers): Add REGCACHE parameter,
use it instead of current_regcache, update calls.
(aix_thread_store_registers): Likewise.
* alphabsd-nat.c (alphabsd_fetch_inferior_registers): Likewise.
(alphabsd_store_inferior_registers): Likewise.
* amd64bsd-nat.c (amd64bsd_fetch_inferior_registers): Likewise.
(amd64bsd_store_inferior_registers): Likewise.
* amd64-linux-nat.c (amd64_linux_fetch_inferior_registers): Likewise.
(amd64_linux_store_inferior_registers): Likewise.
* arm-linux-nat.c (fetch_fpregister, fetch_fpregs, store_fpregister,
store_fpregs, fetch_register, fetch_regs, store_register, store_regs,
fetch_wmmx_regs, store_wmmx_regs): Likewise.
(arm_linux_fetch_inferior_registers): Likewise.
(arm_linux_store_inferior_registers): Likewise.
* armnbsd-nat.c (fetch_register, fetch_regs, fetch_fp_register,
fetch_fp_regs, armnbsd_fetch_registers): Likewise.
(store_register, store_regs, store_fp_register, store_fp_regs,
armnbsd_store_registers): Likewise.
* bsd-kvm.c (bsd_kvm_fetch_pcb, bsd_kvm_fetch_registers): Likewise.
* bsd-uthread.c (bsd_uthread_fetch_registers): Likewise.
(bsd_uthread_store_registers): Likewise.
* corelow.c (get_core_registers): Likewise.
* go32-nat.c (fetch_register, go32_fetch_registers, store_register,
go32_store_registers): Likewise.
* hppabsd-nat.c (hppabsd_fetch_registers): Likewise.
(hppabsd_store_registers): Likewise.
* hppa-hpux-nat.c (hppa_hpux_fetch_register): Likewise.
(hppa_hpux_fetch_inferior_registers): Likewise.
(hppa_hpux_store_register): Likewise.
(hppa_hpux_store_inferior_registers): Likewise.
* hppa-linux-nat.c (fetch_register, store_register): Likewise.
(hppa_linux_fetch_inferior_registers): Likewise.
(hppa_linux_store_inferior_registers): Likewise.
* hpux-thread.c (hpux_thread_fetch_registers): Likewise.
(hpux_thread_store_registers): Likewise.
* i386bsd-nat.c (i386bsd_fetch_inferior_registers): Likewise.
(i386bsd_store_inferior_registers): Likewise.
* i386gnu-nat.c (fetch_fpregs, gnu_fetch_registers, store_fpregs,
gnu_store_registers): Likewise.
* i386-linux-nat.c (fetch_register, store_register, fetch_regs,
store_regs, fetch_fpregs, store_fpregs, fetch_fpxregs, store_fpxregs):
Likewise.
(i386_linux_fetch_inferior_registers): Likewise.
(i386_linux_store_inferior_registers): Likewise.
* ia64-linux-nat.c (ia64_linux_fetch_register): Likewise.
(ia64_linux_fetch_registers): Likewise.
(ia64_linux_store_register): Likewise.
(ia64_linux_store_registers): Likewise.
* inf-child.c (inf_child_fetch_inferior_registers): Likewise.
(inf_child_store_inferior_registers): Likewise.
* inf-ptrace.c (inf_ptrace_fetch_register): Likewise.
(inf_ptrace_fetch_registers): Likewise.
(inf_ptrace_store_register): Likewise.
(inf_ptrace_store_registers): Likewise.
* infptrace.c (fetch_register, store_register): Likewise.
(fetch_inferior_registers, store_inferior_registers): Likewise.
* m32r-linux-nat.c (fetch_regs, store_regs): Likewise.
(m32r_linux_fetch_inferior_registers): Likewise.
(m32r_linux_store_inferior_registers): Likewise.
* m68kbsd-nat.c (m68kbsd_fetch_inferior_registers): Likewise.
(m68kbsd_store_inferior_registers): Likewise.
* m68klinux-nat.c (fetch_register, old_fetch_inferior_registers,
store_register, old_store_inferior_registers, fetch_regs, store_regs,
fetch_fpregs, store_fpregs): Likewise.
(m68k_linux_fetch_inferior_registers): Likewise.
(m68k_linux_store_inferior_registers): Likewise.
* m88kbsd-nat.c (m88kbsd_fetch_inferior_registers): Likewise.
(m88kbsd_store_inferior_registers): Likewise.
* mips64obsd-nat.c (mips64obsd_fetch_inferior_registers): Likewise.
(mips64obsd_store_inferior_registers): Likewise.
* mips-linux-nat.c (mips64_linux_regsets_fetch_registers): Likewise.
(mips64_linux_regsets_store_registers): Likewise.
(mips64_linux_fetch_registers): Likewise.
(mips64_linux_store_registers): Likewise.
* mipsnbsd-nat.c (mipsnbsd_fetch_inferior_registers): Likewise.
(mipsnbsd_store_inferior_registers): Likewise.
* monitor.c (monitor_fetch_register, monitor_store_register): Likewise.
(monitor_fetch_registers, monitor_store_registers): Likewise.
* nto-procfs.c (procfs_fetch_registers): Likewise.
(procfs_store_registers): Likewise.
* ppc-linux-nat.c (fetch_altivec_register, fetch_spe_register,
fetch_register, supply_vrregset, fetch_altivec_registers,
fetch_ppc_registers, ppc_linux_fetch_inferior_registers): Likewise.
(store_altivec_register, store_spe_register, store_register,
fill_vrregset, store_altivec_registers, store_ppc_registers,
ppc_linux_store_inferior_registers): Likewise.
* ppcnbsd-nat.c (ppcnbsd_fetch_inferior_registers): Likewise.
(ppcnbsd_store_inferior_registers): Likewise.
* ppcobsd-nat.c (ppcobsd_fetch_registers): Likewise.
(ppcobsd_store_registers): Likewise.
* procfs.c (procfs_fetch_registers, procfs_store_registers): Likewise.
* remote.c (fetch_register_using_p, process_g_packet,
fetch_registers_using_g, remote_fetch_registers): Likewise.
(store_register_using_P, store_registers_using_G,
remote_store_registers): Likewise.
* remote-m32r-sdi.c (m32r_fetch_registers, m32r_fetch_register,
m32r_store_register, m32r_store_register): Likewise.
* remote-mips.c (mips_fetch_registers, mips_store_registers): Likewise.
* remote-sim.c (gdbsim_fetch_register): Likewise.
(gdbsim_store_register): Likewise.
* rs6000-nat.c (fetch_register, store_register): Likewise.
(rs6000_fetch_inferior_registers): Likewise.
(rs6000_store_inferior_registers): Likewise.
* s390-nat.c (fetch_regs, store_regs): Likewise.
(fetch_fpregs, store_fpregs): Likewise.
(s390_linux_fetch_inferior_registers): Likewise.
(s390_linux_store_inferior_registers): Likewise.
* shnbsd-nat.c (shnbsd_fetch_inferior_registers): Likewise.
(shnbsd_store_inferior_registers): Likewise.
* sol-thread.c (sol_thread_fetch_registers): Likewise.
(sol_thread_store_registers): Likewise.
* sparc-nat.c (fetch_inferior_registers): Likewise.
(store_inferior_registers): Likewise.
* spu-linux-nat.c (spu_fetch_inferior_registers): Likewise.
(spu_store_inferior_registers): Likewise.
* target.c (debug_print_register): Likewise.
(debug_to_fetch_registers, debug_to_store_registers): Likewise.
* vaxbsd-nat.c (vaxbsd_fetch_inferior_registers): Likewise.
(vaxbsd_store_inferior_registers): Likewise.
* win32-nat.c (do_win32_fetch_inferior_registers): Likewise.
(win32_fetch_inferior_registers): Likewise.
(win32_store_inferior_registers): Likewise.
2007-05-06 14:34:38 +00:00
Ulrich Weigand
7f7fe91e15
* gregset.h (struct regcache): Add forward declaration.
...
(supply_gregset): Add REGCACHE parameter, make GREGS const.
(supply_fpregset): Add REGCACHE parameter, make FPREGS const.
(supply_fpxregset): Add REGCACHE parameter, make FPXREGS const.
(fill_gregset): Add REGCACHE parameter.
(fill_fpregset): Likewise.
(fill_fpxregset): Likewise.
Update all definitions accordingly:
* alphabsd-nat.c, alpha-linux-nat.c, alpha-nat.c, amd64-linux-nat.c,
arm-linux-nat.c, hppa-linux-nat.c, i386gnu-nat.c, i386-linux-nat.c,
i386-sol2-nat.c, i386v4-nat.c, ia64-linux-nat.c, irix5-nat.c,
m32r-linux-nat.c, m68klinux-nat.c, mips-linux-nat.c, ppc-linux-nat.c,
s390-nat.c, sparc64-linux-nat.c, sparc-linux-nat.c, sparc-sol2-nat.c
(supply_gregset): Add REGCACHE parameter, use it instead of
current_regcache. Make GREGSETP parameter const, adapt casts.
(supply_fpregset): Add REGCACHE parameter, use it instead of
current_regcache. Make FPREGSETP parameter const, adapt casts.
(fill_gregset): Add REGCACHE parameter, use it instead of
current_regcache.
(fill_fpregset): Likewise.
Update all callers to pass in current_regcache as the new argument:
* core-regset.c: Include "regcache.h".
(fetch_core_registers): Update supply_gregset,and supply_fpregset calls.
* procfs.c: Include "regcache.h".
(procfs_fetch_registers): Update supply_gregset, supply_fpregset calls.
(procfs_store_registers): Update fill_gregset, fill_fpregset calls.
(procfs_do_thread_registers): Likewise.
(procfs_make_note_section): Likewise.
* proc-service.c: Include "regcache.h".
(ps_lgetregs): Update fill_gregset call.
(ps_lsetregs): Update supply_gregset call.
(ps_lgetfpregs): Update fill_fpregset call.
(ps_lsetfpregs): Update supply_fpregset call.
* sol-thread.c (sol_thread_fetch_registers): Update supply_gregset,
supply_fpregset calls.
(sol_thread_store_registers): Update fill_gregset, fill_fpregset calls.
(ps_lgetregs): Update fill_gregset call.
(ps_lsetregs): Update supply_gregset call.
(ps_lgetfpregs): Update fill_fpregset call.
(ps_lsetfpregs): Update supply_fpregset call.
* linux-nat.c (linux_nat_do_thread_registers): Update fill_gregset,
fill_fpregset, and fill_fpxregset calls.
* i386-linux-nat.c (fetch_regs): Update supply_gregset call.
(store_regs): Update fill_gregset call.
(fetch_fpregs): Update supply_fpregset call.
(store_fpregs): Update fill_fpregset call.
(fetch_fpxregs): Update supply_fpxregset call.
(store_fpxregs): Update fill_fpxregset call.
* m32r-linux-nat.c (fetch_regs): Update supply_gregset call.
(store_regs): Update fill_gregset call.
* m68klinux-nat.c (fetch_regs): Update supply_gregset call.
(store_regs): Update fill_gregset call.
(fetch_fpregs): Update supply_fpregset call.
(store_fpregs): Update fill_fpregset call.
(fetch_core_registers): Update supply_gregset, supply_fpregset calls.
* s390-nat.c (fetch_regs): Update supply_gregset call.
(store_regs): Update fill_gregset call.
(fetch_fpregs): Update supply_fpregset call.
(store_fpregs): Update fill_fpregset call.
* Makefile.in (core-regset.o, procfs.o, proc-service.o): Update
dependencies.
2007-05-06 14:32:31 +00:00
Daniel Jacobowitz
6aba47ca06
Copyright updates for 2007.
2007-01-09 17:59:20 +00:00
Daniel Jacobowitz
13547ab600
* target.c (target_read): Stop if target_read_partial returns 0
...
when some bytes have already been read.
(target_write): Likewise for target_write_partial.
(target_read_partial, target_write_partial): Make static.
(target_read_alloc): New.
* target.h: Doc fixes.
(target_read_partial, target_write_partial): Delete prototypes.
(target_read_alloc): New prototype.
* auxv.c (target_auxv_read): Delete.
(target_auxv_search, fprint_target_auxv): Use target_read_alloc.
* auxv.h (target_auxv_read): Delete prototype.
* avr-tdep.c (avr_io_reg_read_command): Use target_read_alloc.
* ia64-tdep.c (getunwind_table, get_kernel_table): Likewise.
* linux-nat.c (linux_nat_make_corefile_notes): Likewise.
* procfs.c (procfs_make_note_section): Likewise.
* remote.c (remote_xfer_partial): Don't loop here.
* sparc-tdep.c (sparc_fetch_wcookie): Use target_read.
2006-07-12 18:13:45 +00:00
Daniel Jacobowitz
8181d85fdc
gdb/
...
* breakpoint.c (deprecated_read_memory_nobpt): Update to use
shadow_len.
(insert_bp_location, reattach_breakpoints, remove_breakpoint)
(delete_breakpoint): Update calls to changed methods.
(deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint)
(single_step_breakpoints, insert_single_step_breakpoint)
(remove_single_step_breakpoints): New.
* breakpoint.h (struct bp_target_info): New.
(struct bp_location): Replace shadow_contents with
target_info and overlay_target_info.
(deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint)
(insert_single_step_breakpoint, remove_single_step_breakpoints): New
prototypes.
* gdbarch.sh: Forward declare struct bp_target_info in gdbarch.h.
(memory_insert_breakpoint, memory_remove_breakpoint): Update second
argument.
* mem-break.c (default_memory_insert_breakpoint): Update. Set
placed_address, placed_size, and shadow_len.
(default_memory_remove_breakpoint): Update. Don't use
BREAKPOINT_FROM_PC.
(memory_insert_breakpoint, memory_remove_breakpoint): Update.
* target.c (update_current_target): Update prototypes for changed
functions.
(debug_to_insert_breakpoint, debug_to_remove_breakpoint)
(debug_to_insert_hw_breakpoint, debug_to_remove_hw_breakpoint):
Update.
* target.h: Forward declare struct bp_target_info.
(struct target_ops): Use a bp_target_info argument for
to_insert_breakpoint, to_remove_breakpoint,
to_insert_hw_breakpoint, and to_remove_hw_breakpoint.
(target_insert_breakpoint, target_remove_breakpoint)
(target_insert_hw_breakpoint, target_remove_hw_breakpoint)
(memory_insert_breakpoint, memory_remove_breakpoint)
(default_memory_insert_breakpoint, default_memory_remove_breakpoint):
Update.
* config/i386/nm-i386.h: Forward declare struct bp_target_info.
(i386_insert_hw_breakpoint, i386_remove_hw_breakpoint): Update.
(target_insert_hw_breakpoint, target_remove_hw_breakpoint): Likewise.
* gdbarch.c, gdbarch.h: Regenerated.
* alpha-tdep.c (alpha_software_single_step): Use
insert_single_step_breakpoint and remove_single_step_breakpoints.
Remove unused statics.
* arm-tdep.c (arm_software_single_step): Likewise. Add a note.
* cris-tdep.c (cris_software_single_step): Likewise.
* mips-tdep.c (mips_software_single_step): Likewise.
* rs6000-tdep.c (rs6000_software_single_step): Likewise.
* sparc-tdep.c (sparc_software_single_step): Likewise.
* wince.c (struct thread_info_struct): Remove step_prev.
(undoSStep): Use remove_single_step_breakpoints.
(wince_software_single_step): Use insert_single_step_breakpoint.
* corelow.c (ignore): Remove unneeded prototype. Update arguments.
* exec.c (ignore): Likewise.
* sol-thread.c (ignore): Likewise.
* procfs.c (dbx_link_shadow_contents): Delete.
(dbx_link_bpt): New.
(procfs_mourn_inferior): Remove it if necessary.
(remove_dbx_link_breakpoint): Use it.
(insert_dbx_link_bpt_in_file): Set it.
(procfs_init_inferior): Don't update dbx_link_bpt_addr.
* rs6000-nat.c (exec_one_dummy_insn): Use
deprecated_insert_raw_breakpoint and
deprecated_remove_raw_breakpoint.
* solib-irix.c (shadow_contents, breakpoint_addr): Delete.
(base_breakpoint): New.
(disable_break): Use it.
(enable_break): Set it.
* i386-nat.c (i386_insert_hw_breakpoint, i386_remove_hw_breakpoint):
Update.
* ia64-tdep.c (ia64_memory_insert_breakpoint)
(ia64_memory_remove_breakpoint): Likewise.
* m32r-tdep.c (m32r_memory_insert_breakpoint)
(m32r_memory_remove_breakpoint): Likewise.
* monitor.c (monitor_insert_breakpoint, monitor_remove_breakpoint):
Likewise. Remove unnecessary prototypes. Use placed_address
and placed_size. Removed useless read from memory.
* nto-procfs.c (procfs_insert_breakpoint)
(procfs_remove_breakpoint, procfs_insert_hw_breakpoint)
(procfs_remove_hw_breakpoint): Update.
* ocd.c (ocd_insert_breakpoint, ocd_remove_breakpoint): Likewise.
* ocd.h (ocd_insert_breakpoint, ocd_remove_breakpoint): Likewise.
* ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Likewise.
* ppc-tdep.h (ppc_linux_memory_remove_breakpoint): Likewise.
* remote-e7000.c (e7000_insert_breakpoint)
(e7000_remove_breakpoint): Likewise.
* remote-m32r-sdi.c (m32r_insert_breakpoint)
(m32r_remove_breakpoint): Likewise.
* remote-mips.c (mips_insert_breakpoint)
(mips_remove_breakpoint): Likewise.
* remote-rdp.c (remote_rdp_insert_breakpoint)
(remote_rdp_remove_breakpoint): Likewise.
(rdp_step): Use deprecated_insert_raw_breakpoint and
deprecated_remove_raw_breakpoint.
* remote-sds.c (sds_insert_breakpoint, sds_remove_breakpoint):
Update.
* remote-sim.c (gdbsim_insert_breakpoint, gdbsim_remove_breakpoint):
Delete.
(init_gdbsim_ops): Use memory_insert_breakpoint and
memory_remove_breakpoint.
* remote-st.c (st2000_insert_breakpoint)
(st2000_remove_breakpoint): Update. Remove unused
BREAKPOINT_FROM_PC.
* remote.c (remote_insert_breakpoint, remote_remove_breakpoint):
Update. Use placed_address and placed_size.
(remote_insert_hw_breakpoint, remote_remove_hw_breakpoint): Likewise.
gdb/doc/
* gdbint.texinfo (x86 Watchpoints, Target Conditionals): Update insert
and remove breakpoint prototypes.
(Watchpoints): Move description of target_insert_hw_breakpoint and
target_remove_hw_breakpoint ...
(Breakpoints): ... to here. Document target_insert_breakpoint and
target_remove_breakpoint.
2006-04-18 19:20:08 +00:00
Daniel Jacobowitz
281b533b6c
* infcmd.c: Include "observer.h".
...
(post_create_inferior): New function.
(run_command_1): Call it. Also call proceed.
* inferior.h (post_create_inferior): New prototype.
* Makefile.in (infcmd.o): Update.
* gnu-nat.c (gnu_create_inferior): Don't call proceed.
* go32-nat.c (go32_create_inferior): Likewise.
* nto-procfs.c (procfs_create_inferior): Likewise.
* procfs.c (procfs_create_inferior): Likewise.
* remote-sim.c (gdbsim_create_inferior): Likewise.
* remote.c (extended_remote_create_inferior)
(extended_remote_async_create_inferior): Likewise.
* win32-nat.c (win32_create_inferior): Likewise.
* wince.c (child_create_inferior): Likewise.
* monitor.c (monitor_create_inferior): Don't call proceed.
Set the PC manually.
* ocd.c (ocd_create_inferior): Likewise.
* remote-e7000.c (e7000_create_inferior): Likewise.
* remote-m32r-sdi.c (m32r_create_inferior): Likewise.
* remote-mips.c (mips_create_inferior): Likewise.
* remote-rdp.c (remote_rdp_create_inferior): Likewise.
* remote-sds.c (sds_create_inferior): Likewise.
* remote-st.c (st2000_create_inferior): Likewise.
* inf-ptrace.c (inf_ptrace_create_inferior): Don't call
proceed or observer_notify_inferior_created.
* inf-ttrace.c (inf_ttrace_create_inferior): Likewise.
* inftarg.c (child_create_inferior): Likewise.
2006-01-24 22:09:28 +00:00
Eli Zaretskii
197e01b6dc
* breakpoint.c:
...
* arm-tdep.c:
* ia64-tdep.c:
* i386-tdep.c:
* hpread.c:
* hppa-tdep.c:
* hppa-hpux-tdep.c:
* gnu-nat.c:
* gdbtypes.c:
* gdbarch.h:
* gdbarch.c:
* eval.c:
* dwarf2read.c:
* dbxread.c:
* copying:
* symfile.c:
* stabsread.c:
* sh64-tdep.c:
* sh-tdep.c:
* s390-tdep.c:
* rs6000-tdep.c:
* remote.c:
* remote-mips.c:
* mips-tdep.c:
* mdebugread.c:
* linux-nat.c:
* infrun.c:
* xcoffread.c:
* win32-nat.c:
* valops.c:
* utils.c:
* tracepoint.c:
* target.c:
* symtab.c:
* c-exp.y:
* ada-valprint.c:
* ada-typeprint.c:
* ada-lex.l:
* ada-lang.h:
* ada-lang.c:
* ada-exp.y:
* alphafbsd-tdep.c:
* alphabsd-tdep.h:
* alphabsd-tdep.c:
* alphabsd-nat.c:
* alpha-tdep.h:
* alpha-tdep.c:
* alpha-osf1-tdep.c:
* alpha-nat.c:
* alpha-mdebug-tdep.c:
* alpha-linux-tdep.c:
* alpha-linux-nat.c:
* aix-thread.c:
* abug-rom.c:
* arch-utils.c:
* annotate.h:
* annotate.c:
* amd64obsd-tdep.c:
* amd64obsd-nat.c:
* amd64nbsd-tdep.c:
* amd64nbsd-nat.c:
* amd64fbsd-tdep.c:
* amd64fbsd-nat.c:
* amd64bsd-nat.c:
* amd64-tdep.h:
* amd64-tdep.c:
* amd64-sol2-tdep.c:
* amd64-nat.h:
* amd64-nat.c:
* amd64-linux-tdep.c:
* amd64-linux-nat.c:
* alphanbsd-tdep.c:
* block.h:
* block.c:
* bfd-target.h:
* bfd-target.c:
* bcache.h:
* bcache.c:
* ax.h:
* ax-general.c:
* ax-gdb.h:
* ax-gdb.c:
* avr-tdep.c:
* auxv.h:
* auxv.c:
* armnbsd-tdep.c:
* armnbsd-nat.c:
* arm-tdep.h:
* arm-linux-nat.c:
* arch-utils.h:
* charset.c:
* call-cmds.h:
* c-valprint.c:
* c-typeprint.c:
* c-lang.h:
* c-lang.c:
* buildsym.h:
* buildsym.c:
* bsd-uthread.h:
* bsd-uthread.c:
* bsd-kvm.h:
* bsd-kvm.c:
* breakpoint.h:
* core-regset.c:
* core-aout.c:
* completer.h:
* completer.c:
* complaints.h:
* complaints.c:
* command.h:
* coffread.c:
* coff-solib.h:
* coff-solib.c:
* coff-pe-read.h:
* coff-pe-read.c:
* cli-out.h:
* cli-out.c:
* charset.h:
* dink32-rom.c:
* dictionary.h:
* dictionary.c:
* demangle.c:
* defs.h:
* dcache.h:
* dcache.c:
* d10v-tdep.c:
* cpu32bug-rom.c:
* cp-valprint.c:
* cp-support.h:
* cp-support.c:
* cp-namespace.c:
* cp-abi.h:
* cp-abi.c:
* corelow.c:
* corefile.c:
* environ.c:
* elfread.c:
* dwarfread.c:
* dwarf2loc.c:
* dwarf2expr.h:
* dwarf2expr.c:
* dwarf2-frame.h:
* dwarf2-frame.c:
* dve3900-rom.c:
* dummy-frame.h:
* dummy-frame.c:
* dsrec.c:
* doublest.h:
* doublest.c:
* disasm.h:
* disasm.c:
* fork-child.c:
* findvar.c:
* fbsd-nat.h:
* fbsd-nat.c:
* f-valprint.c:
* f-typeprint.c:
* f-lang.h:
* f-lang.c:
* expression.h:
* expprint.c:
* exec.h:
* exec.c:
* exceptions.h:
* exceptions.c:
* event-top.h:
* event-top.c:
* event-loop.h:
* event-loop.c:
* gdb.c:
* gdb-stabs.h:
* gdb-events.h:
* gdb-events.c:
* gcore.c:
* frv-tdep.h:
* frv-tdep.c:
* frv-linux-tdep.c:
* frame.h:
* frame.c:
* frame-unwind.h:
* frame-unwind.c:
* frame-base.h:
* frame-base.c:
* gdb_vfork.h:
* gdb_thread_db.h:
* gdb_string.h:
* gdb_stat.h:
* gdb_regex.h:
* gdb_ptrace.h:
* gdb_proc_service.h:
* gdb_obstack.h:
* gdb_locale.h:
* gdb_dirent.h:
* gdb_curses.h:
* gdb_assert.h:
* gdbarch.sh:
* gdb.h:
* hpux-thread.c:
* hppabsd-nat.c:
* hppa-tdep.h:
* hpacc-abi.c:
* h8300-tdep.c:
* gregset.h:
* go32-nat.c:
* gnu-v3-abi.c:
* gnu-v2-abi.h:
* gnu-v2-abi.c:
* gnu-nat.h:
* glibc-tdep.c:
* gdbtypes.h:
* gdbcore.h:
* gdbcmd.h:
* i386nbsd-tdep.c:
* i386nbsd-nat.c:
* i386gnu-tdep.c:
* i386gnu-nat.c:
* i386fbsd-tdep.c:
* i386fbsd-nat.c:
* i386bsd-tdep.c:
* i386bsd-nat.h:
* i386bsd-nat.c:
* i386-tdep.h:
* i386-sol2-nat.c:
* i386-nto-tdep.c:
* i386-nat.c:
* i386-linux-tdep.h:
* i386-linux-tdep.c:
* i386-linux-nat.c:
* i386-cygwin-tdep.c:
* inf-ttrace.c:
* inf-ptrace.h:
* inf-ptrace.c:
* inf-loop.h:
* inf-loop.c:
* inf-child.h:
* inf-child.c:
* ia64-tdep.h:
* ia64-linux-nat.c:
* i387-tdep.h:
* i387-tdep.c:
* i386v4-nat.c:
* i386v-nat.c:
* i386obsd-tdep.c:
* i386obsd-nat.c:
* kod.c:
* jv-valprint.c:
* jv-typeprint.c:
* jv-lang.h:
* jv-lang.c:
* irix5-nat.c:
* iq2000-tdep.c:
* interps.h:
* interps.c:
* inftarg.c:
* inflow.h:
* inflow.c:
* inferior.h:
* infcmd.c:
* infcall.h:
* infcall.c:
* inf-ttrace.h:
* m32r-tdep.h:
* m32r-tdep.c:
* m32r-rom.c:
* m32r-linux-tdep.c:
* m32r-linux-nat.c:
* m2-valprint.c:
* m2-typeprint.c:
* m2-lang.h:
* m2-lang.c:
* lynx-nat.c:
* linux-thread-db.c:
* linux-nat.h:
* linespec.c:
* libunwind-frame.h:
* libunwind-frame.c:
* language.h:
* language.c:
* macroexp.c:
* macrocmd.c:
* m88kbsd-nat.c:
* m88k-tdep.h:
* m88k-tdep.c:
* m68klinux-tdep.c:
* m68klinux-nat.c:
* m68kbsd-tdep.c:
* m68kbsd-nat.c:
* m68k-tdep.h:
* m68k-tdep.c:
* mips-linux-nat.c:
* mips-irix-tdep.c:
* minsyms.c:
* memattr.h:
* memattr.c:
* mem-break.c:
* mdebugread.h:
* main.h:
* main.c:
* macrotab.h:
* macrotab.c:
* macroscope.h:
* macroscope.c:
* macroexp.h:
* nbsd-tdep.c:
* mt-tdep.c:
* monitor.h:
* monitor.c:
* mn10300-tdep.h:
* mn10300-tdep.c:
* mn10300-linux-tdep.c:
* mipsv4-nat.c:
* mipsread.c:
* mipsnbsd-tdep.h:
* mipsnbsd-tdep.c:
* mipsnbsd-nat.c:
* mips64obsd-tdep.c:
* mips64obsd-nat.c:
* mips-tdep.h:
* mips-mdebug-tdep.c:
* mips-linux-tdep.c:
* osabi.h:
* osabi.c:
* ocd.h:
* ocd.c:
* observer.c:
* objfiles.h:
* objfiles.c:
* objc-lang.h:
* objc-lang.c:
* objc-exp.y:
* nto-tdep.h:
* nto-tdep.c:
* nto-procfs.c:
* nlmread.c:
* nbsd-tdep.h:
* ppcobsd-tdep.c:
* ppcobsd-nat.c:
* ppcnbsd-tdep.h:
* ppcnbsd-tdep.c:
* ppcnbsd-nat.c:
* ppcbug-rom.c:
* ppc-tdep.h:
* ppc-sysv-tdep.c:
* ppc-linux-tdep.c:
* ppc-linux-nat.c:
* ppc-bdm.c:
* parser-defs.h:
* parse.c:
* p-valprint.c:
* p-typeprint.c:
* p-lang.h:
* p-lang.c:
* remote-fileio.h:
* remote-fileio.c:
* remote-est.c:
* remote-e7000.c:
* regset.h:
* regset.c:
* reggroups.h:
* reggroups.c:
* regcache.h:
* regcache.c:
* proc-why.c:
* proc-service.c:
* proc-events.c:
* printcmd.c:
* ppcobsd-tdep.h:
* sentinel-frame.h:
* sentinel-frame.c:
* scm-valprint.c:
* scm-tags.h:
* scm-lang.h:
* scm-lang.c:
* scm-exp.c:
* s390-tdep.h:
* rom68k-rom.c:
* remote.h:
* remote-utils.c:
* remote-st.c:
* remote-sim.c:
* remote-sds.c:
* remote-rdp.c:
* remote-rdi.c:
* remote-hms.c:
* sim-regno.h:
* shnbsd-tdep.h:
* shnbsd-tdep.c:
* shnbsd-nat.c:
* sh-tdep.h:
* serial.h:
* serial.c:
* ser-unix.h:
* ser-unix.c:
* ser-tcp.c:
* ser-pipe.c:
* ser-go32.c:
* ser-e7kpc.c:
* ser-base.h:
* ser-base.c:
* solib.c:
* solib-svr4.h:
* solib-svr4.c:
* solib-sunos.c:
* solib-som.h:
* solib-som.c:
* solib-pa64.h:
* solib-pa64.c:
* solib-osf.c:
* solib-null.c:
* solib-legacy.c:
* solib-irix.c:
* solib-frv.c:
* solib-aix5.c:
* sol-thread.c:
* sparc64-linux-tdep.c:
* sparc64-linux-nat.c:
* sparc-tdep.h:
* sparc-tdep.c:
* sparc-sol2-tdep.c:
* sparc-sol2-nat.c:
* sparc-nat.h:
* sparc-nat.c:
* sparc-linux-tdep.c:
* sparc-linux-nat.c:
* source.h:
* source.c:
* somread.c:
* solist.h:
* solib.h:
* std-regs.c:
* stack.h:
* stack.c:
* stabsread.h:
* sparcobsd-tdep.c:
* sparcnbsd-tdep.c:
* sparcnbsd-nat.c:
* sparc64obsd-tdep.c:
* sparc64nbsd-tdep.c:
* sparc64nbsd-nat.c:
* sparc64fbsd-tdep.c:
* sparc64fbsd-nat.c:
* sparc64-tdep.h:
* sparc64-tdep.c:
* sparc64-sol2-tdep.c:
* sparc64-nat.c:
* ui-file.c:
* typeprint.h:
* typeprint.c:
* tramp-frame.h:
* tramp-frame.c:
* trad-frame.h:
* trad-frame.c:
* tracepoint.h:
* top.c:
* tobs.inc:
* thread.c:
* terminal.h:
* target.h:
* symfile.h:
* stop-gdb.c:
* vaxbsd-nat.c:
* vax-tdep.h:
* vax-tdep.c:
* vax-nat.c:
* varobj.h:
* varobj.c:
* value.h:
* value.c:
* valprint.h:
* valprint.c:
* v850-tdep.c:
* uw-thread.c:
* user-regs.c:
* ui-out.h:
* ui-out.c:
* ui-file.h:
* xcoffsolib.h:
* xcoffsolib.c:
* wrapper.c:
* wince.c:
* wince-stub.h:
* wince-stub.c:
* vaxobsd-tdep.c:
* vaxnbsd-tdep.c:
* gdb_gcore.sh:
* copying.c:
* configure.ac:
* aclocal.m4:
* acinclude.m4:
* reply_mig_hack.awk:
* observer.sh:
* gdb_mbuild.sh:
* arm-linux-tdep.c:
* blockframe.c:
* dbug-rom.c:
* environ.h:
* dwarf2loc.h:
* gdb-events.sh:
* glibc-tdep.h:
* gdb_wait.h:
* gdbthread.h:
* i386-sol2-tdep.c:
* hppabsd-tdep.c:
* hppa-linux-nat.c:
* hppa-hpux-nat.c:
* ia64-linux-tdep.c:
* infptrace.c:
* linespec.h:
* maint.c:
* mips-mdebug-tdep.h:
* remote-m32r-sdi.c:
* s390-nat.c:
* rs6000-nat.c:
* remote-utils.h:
* sh3-rom.c:
* sh-linux-tdep.c:
* top.h:
* symtab.h:
* symmisc.c:
* symfile-mem.c:
* srec.h:
* user-regs.h:
* version.h:
* valarith.c:
* xstormy16-tdep.c:
* wrapper.h:
* Makefile.in:
* f-exp.y:
* cris-tdep.c:
* cp-name-parser.y:
* procfs.c:
* proc-utils.h:
* proc-flags.c:
* proc-api.c:
* p-exp.y:
* m68hc11-tdep.c:
* m2-exp.y:
* kod.h:
* kod-cisco.c:
* jv-exp.y:
* hppa-linux-tdep.c: Add (c) after Copyright. Update the FSF
address.
2005-12-17 22:34:03 +00:00
Andrew Cagney
1bedd21517
2005-02-15 Andrew Cagney <cagney@gnu.org>
...
Mark up add_com, add_info and add_prefix_cmd.
* breakpoint.c, cp-support.c, dcache.c, dwarf2read.c: Update.
* exec.c, f-valprint.c, frame.c, gcore.c, gnu-nat.c: Update.
* go32-nat.c, infcmd.c, inflow.c, infptrace.c, infrun.c: Update.
* kod.c, language.c, linux-nat.c, m32r-rom.c, macrocmd.c: Update.
* maint.c, memattr.c, mips-tdep.c, nto-procfs.c, objc-lang.c: Update.
* ocd.c, pa64solib.c, printcmd.c, procfs.c, regcache.c: Update.
* remote-e7000.c, remote-m32r-sdi.c, remote-mips.c: Update.
* remote-sds.c, remote-sim.c, remote-st.c, remote-utils.c: Update.
* remote.c, rs6000-tdep.c, ser-go32.c, serial.c: Update.
* sh-tdep.c, solib.c, somsolib.c, source.c, stack.c: Update.
* symfile.c, symtab.c, target.c, thread.c, top.c: Update.
* tracepoint.c, typeprint.c, utils.c, valprint.c: Update.
* win32-nat.c, xcoffsolib.c, cli/cli-cmds.c, cli/cli-dump.c: Update.
* cli/cli-logging.c, tui/tui-layout.c, tui/tui-regs.c: Update.
* tui/tui-stack.c, tui/tui-win.c: Update.
2005-02-15 15:49:28 +00:00
Andrew Cagney
a3f171870f
2005-02-11 Andrew Cagney <cagney@gnu.org>
...
Mark up some of printf_filtered and printf_unfiltered.
* ada-lang.c, annotate.c, arch-utils.c, breakpoint.c: Update.
* corelow.c, cp-namespace.c, cp-support.c, dcache.c: Update.
* demangle.c, dsrec.c, dwarf2read.c, dwarfread.c: Update.
* event-loop.c, event-top.c, exec.c, f-valprint.c: Update.
* gdbtypes.c, inf-loop.c, inf-ptrace.c, inf-ttrace.c: Update.
* infcmd.c, inflow.c, infrun.c, inftarg.c, language.c: Update.
* linespec.c, linux-nat.c, linux-thread-db.c, maint.c: Update.
* mdebugread.c, memattr.c, monitor.c, objc-lang.c: Update.
* ocd.c, osabi.c, printcmd.c, procfs.c, regcache.c: Update.
* remote.c, solib-som.c, solib.c, somsolib.c, source.c: Update.
* stack.c, symfile.c, symmisc.c, target.c, thread.c: Update.
* top.c, utils.c, valprint.c, value.c, cli/cli-cmds.c: Update.
* cli/cli-dump.c, cli/cli-logging.c, tui/tui-hooks.c: Update.
* tui/tui-regs.c, tui/tui-win.c: Update.
2005-02-12 00:39:24 +00:00
Andrew Cagney
e2e0b3e57f
2005-02-11 Andrew Cagney <cagney@gnu.org>
...
Mark up error_no_arg, query, perror_with_name, complaint, and
internal_error.
* breakpoint.c, cp-abi.c, cp-namespace.c, cp-support.c: Update.
* cris-tdep.c, dbxread.c, dictionary.c, dsrec.c: Update.
* dummy-frame.c, dve3900-rom.c, dwarf2-frame.c, dwarf2expr.c: Update.
* dwarf2read.c, dwarfread.c, elfread.c, event-loop.c: Update.
* exceptions.c, exec.c, f-lang.c, findvar.c, fork-child.c: Update.
* frame-unwind.c, frame.c, frv-linux-tdep.c, frv-tdep.c: Update.
* gdb_assert.h, gdbarch.c, gdbtypes.c, gnu-nat.c: Update.
* go32-nat.c, hppa-tdep.c, hppabsd-nat.c, hpread.c: Update.
* i386-linux-nat.c, i386-nat.c, i386-tdep.c, i386bsd-nat.c: Update.
* i386fbsd-nat.c, inf-ptrace.c, inf-ttrace.c, infcall.c: Update.
* infcmd.c, inflow.c, infptrace.c, infrun.c, inftarg.c: Update.
* interps.c, language.c, linespec.c, linux-nat.c: Update.
* m32r-linux-nat.c, m68k-tdep.c, m68kbsd-nat.c: Update.
* m68klinux-nat.c, m88kbsd-nat.c, macroexp.c, macroscope.c: Update.
* macrotab.c, maint.c, mdebugread.c, memattr.c: Update.
* mips-linux-tdep.c, mips-tdep.c, mips64obsd-nat.c: Update.
* mipsnbsd-nat.c, mn10300-tdep.c, monitor.c, nto-procfs.c: Update.
* objc-lang.c, objfiles.c, objfiles.h, ocd.c, osabi.c: Update.
* parse.c, ppc-bdm.c, ppc-linux-nat.c, ppc-sysv-tdep.c: Update.
* ppcnbsd-nat.c, ppcobsd-nat.c, printcmd.c, procfs.c: Update.
* regcache.c, reggroups.c, remote-e7000.c, remote-mips.c: Update.
* remote-rdp.c, remote-sds.c, remote-sim.c, remote-st.c: Update.
* remote-utils.c, remote.c, rs6000-nat.c, rs6000-tdep.c: Update.
* s390-nat.c, s390-tdep.c, sentinel-frame.c, serial.c: Update.
* sh-tdep.c, sh3-rom.c, sh64-tdep.c, shnbsd-nat.c: Update.
* solib-aix5.c, solib-svr4.c, solib.c, source.c: Update.
* sparc-nat.c, stabsread.c, stack.c, symfile.c, symtab.c: Update.
* symtab.h, target.c, tracepoint.c, ui-file.c, ui-out.c: Update.
* utils.c, valops.c, valprint.c, vax-nat.c, vaxbsd-nat.c: Update.
* win32-nat.c, xcoffread.c, xstormy16-tdep.c: Update.
* cli/cli-cmds.c, cli/cli-logging.c, cli/cli-script.c: Update.
* cli/cli-setshow.c, mi/mi-cmd-break.c, mi/mi-cmds.c: Update.
* mi/mi-console.c, mi/mi-getopt.c, mi/mi-out.c: Update.
* tui/tui-file.c, tui/tui-interp.c: Update.
2005-02-11 18:13:55 +00:00
Andrew Cagney
8a3fe4f86c
2005-02-10 Andrew Cagney <cagney@gnu.org>
...
Mark up all error and warning messages.
* ada-lang.c, amd64-tdep.c, arch-utils.c, breakpoint.c: Update.
* bsd-kvm.c, bsd-uthread.c, coff-solib.h, coffread.c: Update.
* core-aout.c, core-regset.c, corefile.c, corelow.c: Update.
* cp-abi.c, cp-support.c, cp-valprint.c, cris-tdep.c: Update.
* dbxread.c, demangle.c, doublest.c, dsrec.c: Update.
* dve3900-rom.c, dwarf2expr.c, dwarf2loc.c: Update.
* dwarf2read.c, dwarfread.c, elfread.c, eval.c: Update.
* event-top.c, exec.c, expprint.c, f-lang.c: Update.
* f-typeprint.c, f-valprint.c, fbsd-nat.c, findvar.c: Update.
* frame.c, frv-linux-tdep.c, gcore.c, gdbtypes.c: Update.
* gnu-nat.c, gnu-v2-abi.c, gnu-v3-abi.c, go32-nat.c: Update.
* hpacc-abi.c, hppa-hpux-nat.c, hppa-hpux-tdep.c: Update.
* hppa-linux-nat.c, hppa-linux-tdep.c, hppa-tdep.c: Update.
* hpread.c, hpux-thread.c, i386-linux-nat.c: Update.
* i386-linux-tdep.c, i386-tdep.c, i386bsd-nat.c: Update.
* i386gnu-nat.c, i387-tdep.c, ia64-linux-nat.c: Update.
* ia64-tdep.c, inf-child.c, inf-ptrace.c, inf-ttrace.c: Update.
* infcall.c, infcmd.c, inflow.c, infptrace.c, infrun.c: Update.
* inftarg.c, interps.c, irix5-nat.c, jv-lang.c: Update.
* kod-cisco.c, kod.c, language.c, libunwind-frame.c: Update.
* linespec.c, linux-nat.c, linux-thread-db.c, m2-lang.c: Update.
* m32r-rom.c, m68hc11-tdep.c, m68k-tdep.c: Update.
* m68klinux-nat.c, macrocmd.c, macroexp.c, main.c: Update.
* maint.c, mdebugread.c, mem-break.c, memattr.c: Update.
* mips-linux-tdep.c, mips-tdep.c, mipsread.c, monitor.c: Update.
* nlmread.c, nto-procfs.c, objc-lang.c, objfiles.c: Update.
* observer.c, ocd.c, p-lang.c, p-typeprint.c: Update.
* p-valprint.c, pa64solib.c, parse.c, ppc-linux-tdep.c: Update.
* ppcnbsd-tdep.c, printcmd.c, procfs.c, remote-e7000.c: Update.
* remote-fileio.c, remote-m32r-sdi.c, remote-rdi.c: Update.
* remote-rdp.c, remote-sim.c, remote-st.c: Update.
* remote-utils.c, remote-utils.h, remote.c: Update.
* rom68k-rom.c, rs6000-nat.c, s390-tdep.c, scm-lang.c: Update.
* ser-e7kpc.c, ser-tcp.c, ser-unix.c, sh-tdep.c: Update.
* sh3-rom.c, shnbsd-tdep.c, sol-thread.c, solib-aix5.c: Update.
* solib-frv.c, solib-irix.c, solib-osf.c, solib-pa64.c: Update.
* solib-som.c, solib-sunos.c, solib-svr4.c, solib.c: Update.
* somread.c, somsolib.c, source.c, stabsread.c: Update.
* stack.c, std-regs.c, symfile-mem.c, symfile.c: Update.
* symmisc.c, symtab.c, target.c, thread.c, top.c: Update.
* tracepoint.c, trad-frame.c, typeprint.c, utils.c: Update.
* uw-thread.c, valarith.c, valops.c, valprint.c: Update.
* value.c, varobj.c, version.in, win32-nat.c, wince.c: Update.
* xcoffread.c, xcoffsolib.c, cli/cli-cmds.c: Update.
* cli/cli-decode.c, cli/cli-dump.c, cli/cli-logging.c: Update.
* cli/cli-script.c, cli/cli-setshow.c, mi/mi-cmd-break.c: Update.
* mi/mi-cmd-disas.c, mi/mi-cmd-env.c, mi/mi-cmd-file.c: Update.
* mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-getopt.c: Update.
* mi/mi-symbol-cmds.c, tui/tui-layout.c, tui/tui-stack.c: Update.
* tui/tui-win.c: Update.
2005-02-11 04:06:14 +00:00
Mark Kettenis
ceb41096a8
* procfs.c (procfs_fetch_registers, procfs_store_registers): Like
...
Remove optimization for DEPRECATED_FP_REGNUM.
2004-10-30 21:30:58 +00:00
Mark Kettenis
772cf8be75
* procfs.c (proc_get_gregs, proc_get_fpregs, proc_set_gregs)
...
(proc_set_fpregs, procfs_fetch_registers, procfs_store_registers):
Cleanup coding style.
2004-10-30 18:01:11 +00:00
Andrew Cagney
c8e73a318e
2004-10-08 Andrew Cagney <cagney@gnu.org>
...
* target.h (struct target_ops): Rename to_xfer_memory to
deprecated_xfer_memory.
* target.c: Update.
(deprecated_debug_xfer_memory): Rename debug_to_xfer_memory.
* wince.c: Update.
* win32-nat.c: Update.
* v850ice.c: Update.
* uw-thread.c: Update.
* thread-db.c: Update.
* sol-thread.c: Update.
* remote.c: Update.
* remote-vx.c: Update.
* remote-st.c: Update.
* remote-sim.c: Update.
* remote-sds.c: Update.
* remote-rdp.c: Update.
* remote-rdi.c: Update.
* remote-mips.c: Update.
* remote-m32r-sdi.c: Update.
* remote-e7000.c: Update.
* procfs.c: Update.
* ppc-bdm.c: Update.
* nto-procfs.c: Update.
* monitor.c: Update.
* linux-nat.c: Update.
* inftarg.c: Update.
* hpux-thread.c: Update.
* go32-nat.c: Update.
* gnu-nat.c: Update.
* exec.c: Update.
* corelow.c: Update.
* bsd-kvm.c: Update.
* aix-thread.c: Update.
2004-10-08 20:30:00 +00:00
Mark Kettenis
998bdd68ff
* procfs.c (procfs_xfer_partial): Use WRITEBUF instead of READBUF
...
when writing to memory.
2004-10-05 11:24:21 +00:00
Joel Brobecker
9185ddce96
* procfs.c (dbx_link_bpt_addr): New static global variable.
...
(dbx_link_shadow_contents): New static global variable.
(procfs_wait, case <PR_SYSEXIT>): Handle syssgi events.
(procfs_wait, case <FLTBPT>): Remove the __dbx_link brekapoint
if we just hit it.
(procfs_init_inferior): Enable syssgi() syscall trace if appropriate.
Reset dbx_link_bpt_addr as the address of __dbx_link() may change
from run to run.
(procfs_create_inferior): Remove syssgi syscall-exit notifications
after the inferior has been forked.
(remove_dbx_link_breakpoint): New function.
(dbx_link_addr): New function.
(insert_dbx_link_bpt_in_file): New function.
(insert_dbx_link_bpt_in_region): New function.
(insert_dbx_link_breakpoint): New function.
(proc_trace_syscalls_1): New function, extracted from
proc_trace_syscalls.
(proc_trace_syscalls): Replace extract code by call to
proc_trace_syscalls_1.
* solib-irix.c (disable_break): Remove stop_pc assertion, as it
is no longer valid.
2004-08-27 13:37:42 +00:00
Mark Kettenis
cc377e6b36
* procfs.c (procfs_detach): Cleanup. Print process ID, not LWP
...
ID. Use comma in output. Use gdb_flush on gdb_stdout instead of
fflush on stdout.
2004-08-11 06:55:15 +00:00
Mark Kettenis
21749010c8
* procfs.c (procfs_pid_to_str): Use "%ld" to print LWP.
2004-08-10 16:05:38 +00:00
Mark Kettenis
5240ceac28
* procfs.c (procfs_pid_to_str): Remove redundant and unused
...
variables. Incapitalized "process".
2004-08-08 01:00:55 +00:00
Andrew Cagney
c27cda74c7
2004-05-25 Andrew Cagney <cagney@gnu.org>
...
* target.h (struct target_ops): Add from_tty to
to_create_inferior.
(target_create_inferior, find_default_create_inferior): Update.
* infcmd.c (run_command): Update.
* wince.c (child_create_inferior): Update.
* win32-nat.c (child_create_inferior): Update.
* uw-thread.c (uw_thread_create_inferior): Update.
* thread-db.c (thread_db_create_inferior): Update.
* target.c (debug_to_create_inferior)
(find_default_create_inferior): Update.
(maybe_kill_then_create_inferior): Update.
* sol-thread.c (sol_thread_create_inferior): Update.
* remote.c (extended_remote_async_create_inferior)
(extended_remote_create_inferior): Update.
* remote-vx.c (vx_create_inferior): Update.
* remote-st.c (st2000_create_inferior): Update.
* remote-sim.c (gdbsim_create_inferior): Update.
* remote-sds.c (sds_create_inferior): Update.
* remote-rdp.c (remote_rdp_create_inferior): Update.
* remote-rdi.c (arm_rdi_create_inferior): Update.
* remote-m32r-sdi.c (m32r_create_inferior): Update.
* remote-e7000.c (e7000_create_inferior): Update.
* procfs.c (procfs_create_inferior): Update.
* ocd.c (ocd_create_inferior): Update.
* ocd.h (ocd_create_inferior): Update.
* nto-procfs.c (procfs_create_inferior): Update.
* monitor.c (monitor_create_inferior): Update.
* lin-lwp.c (lin_lwp_create_inferior): Update.
* inftarg.c (child_create_inferior): Update.
* hpux-thread.c (hpux_thread_create_inferior): Update.
* gnu-nat.c (gnu_create_inferior): Update.
2004-05-25 14:58:31 +00:00
Andrew Cagney
46ac7a5dc6
2004-02-15 Andrew Cagney <cagney@redhat.com>
...
* procfs.c (procfs_init_inferior): Assume that
START_INFERIOR_TRAPS_EXPECTED is defined.
* config/ns32k/nbsdaout.mt (TM_FILE): Set to tm-ns32k.h.
* config/ns32k/tm-nbsd.h: Delete file,
START_INFERIOR_TRAPS_EXPECTED already defined as 2.
2004-02-15 22:38:40 +00:00
Roland McGrath
4e73f23d28
2004-01-28 Roland McGrath <roland@redhat.com>
...
* procfs.c (procfs_xfer_partial): New function.
(init_procfs_ops): Use that for procfs_ops.to_xfer_partial.
* Makefile.in (procfs.o): Add $(auxv_h) dep.
* procfs.c (procfs_make_note_section): If we can read
TARGET_OBJECT_AUXV data, add an NT_AUXV note containing it.
* linux-proc.c (linux_make_note_section): Likewise.
2004-02-01 22:35:13 +00:00
Roland McGrath
199587082a
2004-01-29 Roland McGrath <roland@redhat.com>
...
* procfs.c: Include gdb_string.h for str* decls, otherwise warnings.
* Makefile.in (procfs.o): Add dep.
2004-01-29 21:54:22 +00:00
Andrew Cagney
afb18d0f3d
2004-01-17 Andrew Cagney <cagney@redhat.com>
...
* gdbarch.sh (DEPRECATED_NPC_REGNUM): Delete.
* gdbarch.h, gdbarch.c: Re-generate.
* procfs.c (procfs_fetch_registers): Delete reference to
DEPRECATED_NPC_REGNUM.
(procfs_store_registers): Ditto.
* regcache.c (generic_target_write_pc): Simplify.
* lynx-nat.c: Delete #ifdef SPARC code. Not used.
Index: doc/ChangeLog
2004-01-17 Andrew Cagney <cagney@redhat.com>
* gdbint.texinfo (Target Architecture Definition): Delete
documentation on DEPRECATED_NPC_REGNUM.
2004-01-17 18:24:15 +00:00
Andrew Cagney
7af6341f3b
2003-11-22 Andrew Cagney <cagney@redhat.com>
...
* procfs.c (procfs_wait): Delete FAULTED_USE_SIGINFO comment.
* config/sparc/tm-sun4sol2.h (FAULTED_USE_SIGINFO): Delete macro.
* config/i386/tm-i386sol2.h (FAULTED_USE_SIGINFO): Delete macro.
* config/alpha/nm-osf2.h (FAULTED_USE_SIGINFO): Delete macro.
2003-11-22 22:43:05 +00:00
Andrew Cagney
deafb06122
2003-09-20 Andrew Cagney <cagney@redhat.com>
...
* breakpoint.c: Eliminate ARGSUSED.
* buildsym.c, cli/cli-cmds.c, cli/cli-script.c: Ditto.
* coffread.c, corelow.c, dwarf2read.c, event-top.c: Ditto.
* exec.c, gcore.c, hpux-thread.c, infcmd.c, inflow.c: Ditto.
* infrun.c, inftarg.c, maint.c, ocd.c, printcmd.c: Ditto.
* procfs.c, regcache.c, remote-rdi.c, remote-sds.c: Ditto.
* remote.c, sol-thread.c, source.c, stabsread.c: Ditto.
* stack.c, symfile.c, target.c, top.c, typeprint.c: Ditto.
* utils.c, v850ice.c, valprint.c, values.c, win32-nat.c: Ditto.
* wince.c, remote-vx.c: Ditto.
2003-09-21 01:26:46 +00:00
Andrew Cagney
efe59759d8
2003-09-17 Andrew Cagney <cagney@redhat.com>
...
* gdbarch.sh (DEPRECATED_NPC_REGNUM): Deprecate NPC_REGNUM.
* gdbarch.h, gdbarch.c: Regenerate.
* core-sol2.c, hppa-tdep.c, lynx-nat.c, procfs.c: Update.
* regcache.c, remote-vxsparc.c, sparc-linux-nat.c: Update.
* sparc-nat.c, sparc-tdep.c, sparc64-tdep.c: Update.
* sparcnbsd-tdep.c: Update.
2003-09-17 15:42:21 +00:00
Andrew Cagney
0ba6dca974
2003-04-28 Andrew Cagney <cagney@redhat.com>
...
* gdbarch.sh (DEPRECATED_TARGET_READ_FP): Replace TARGET_READ_FP.
(DEPRECATED_FP_REGNUM): Replace FP_REGNUM.
* gdbarch.h, gdbarch.c: Re-generate.
* infcall.c (call_function_by_hand): Use DEPRECATED_FP_REGNUM,
DEPRECATED_TARGET_READ_FP, or "sp" to create the dummy frame ID.
* inferior.h (deprecated_read_fp): Rename read_fp.
(generic_target_read_fp): Delete declaration.
* regcache.c (generic_target_read_fp): Delete function.
(deprecated_read_fp): Replace read_fp, use
DEPRECATED_TARGET_READ_FP or DEPRECATED_FP_REGNUM.
* d10v-tdep.c (d10v_read_fp): Delete function.
(d10v_gdbarch_init): Do not set deprecated_read_fp.
* sparc-tdep.c (sparc_gdbarch_init): Do not set
deprecated_target_read_fp to generic_target_read_fp.
* sh-tdep.c (sh_gdbarch_init): Ditto.
* rs6000-tdep.c (rs6000_gdbarch_init): Ditto.
* m68hc11-tdep.c (m68hc11_gdbarch_init): Ditto.
* frv-tdep.c (frv_gdbarch_init): Ditto.
* xstormy16-tdep.c (xstormy16_gdbarch_init): Set
deprecated_fp_regnum.
* x86-64-tdep.c (x86_64_init_abi): Ditto.
* vax-tdep.c (vax_gdbarch_init): Ditto.
* v850-tdep.c (v850_gdbarch_init): Ditto.
* sparc-tdep.c (sparc_gdbarch_init): Ditto.
* sh-tdep.c (sh_gdbarch_init): Ditto.
* s390-tdep.c (s390_gdbarch_init): Ditto.
* rs6000-tdep.c (rs6000_gdbarch_init): Ditto.
* mn10300-tdep.c (mn10300_gdbarch_init): Ditto.
* mcore-tdep.c (mcore_gdbarch_init): Ditto.
* m68k-tdep.c (m68k_gdbarch_init): Ditto.
* m68hc11-tdep.c (m68hc11_gdbarch_init): Ditto.
* ia64-tdep.c (ia64_gdbarch_init): Ditto.
* i386-tdep.c (i386_gdbarch_init): Ditto.
* hppa-tdep.c (hppa_gdbarch_init): Ditto.
* h8300-tdep.c (h8300_gdbarch_init): Ditto.
* frv-tdep.c (frv_gdbarch_init): Ditto.
* cris-tdep.c (cris_gdbarch_init): Ditto.
* avr-tdep.c (avr_gdbarch_init): Ditto.
* arm-tdep.c (arm_gdbarch_init): Ditto.
* alpha-tdep.c (alpha_gdbarch_init): Ditto.
* x86-64-tdep.c (x86_64_init_abi): Set deprecated_target_read_fp.
* v850-tdep.c (v850_gdbarch_init): Ditto.
* sparc-tdep.c (sparc_gdbarch_init): Ditto.
* sh-tdep.c (sh_gdbarch_init): Ditto.
* s390-tdep.c (s390_gdbarch_init): Ditto.
* rs6000-tdep.c (rs6000_gdbarch_init): Ditto.
* mn10300-tdep.c (mn10300_gdbarch_init): Ditto.
* mips-tdep.c (mips_gdbarch_init): Ditto.
* m68hc11-tdep.c (m68hc11_gdbarch_init): Ditto.
* ia64-tdep.c (ia64_gdbarch_init): Ditto.
* hppa-tdep.c (hppa_gdbarch_init): Ditto.
* frv-tdep.c (frv_gdbarch_init): Ditto.
* avr-tdep.c (avr_gdbarch_init): Ditto.
* arm-tdep.c (arm_gdbarch_init): Ditto.
* vax-tdep.c (vax_frame_init_saved_regs): Replace FP_REGNUM with
DEPRECATED_FP_REGNUM.
(vax_push_dummy_frame, vax_pop_frame): Ditto.
* std-regs.c (value_of_builtin_frame_fp_reg): Ditto.
* sparc-tdep.c (sparc_init_extra_frame_info): Ditto.
(sparc_push_dummy_frame, sparc64_read_fp): Ditto.
(sparc32_register_virtual_type): Ditto.
* sh-tdep.c (sh64_frame_chain): Ditto.
(sh64_get_saved_register, sh64_pop_frame): Ditto.
(sh_nofp_frame_init_saved_regs): Ditto.
(sh64_nofp_frame_init_saved_regs): Ditto.
(sh_fp_frame_init_saved_regs): Ditto.
* remote-mips.c (mips_wait, mips_fetch_registers): Ditto.
* remote-e7000.c (fetch_regs_from_dump): Ditto.
* procfs.c (procfs_fetch_registers): Ditto.
(procfs_store_registers): Ditto.
* ns32knbsd-nat.c (fetch_inferior_registers): Ditto.
(store_inferior_registers, fetch_core_registers): Ditto.
(fetch_kcore_registers, clear_regs): Ditto.
* ns32k-tdep.c (ns32k_frame_init_saved_regs): Ditto.
(ns32k_push_dummy_frame, ns32k_pop_frame): Ditto.
* nlm/i386.h (DEPRECATED_FP_REGNUM): Ditto.
* nlm/i386.c (do_status): Ditto.
* mipsv4-nat.c (supply_gregset): Ditto.
* mips-tdep.c: Ditto for comments.
* mips-nat.c (fetch_inferior_registers): Ditto.
(store_inferior_registers, fetch_core_registers): Ditto.
* m68k-tdep.c (m68k_push_dummy_frame): Ditto.
(m68k_pop_frame, m68k_frame_init_saved_regs): Ditto.
* i386-tdep.c (i386_frame_init_saved_regs): Ditto.
(i386_do_pop_frame, i386_register_type): Ditto.
* hppa-tdep.c (hppa_frame_chain): Ditto.
(hppa_push_dummy_frame, find_dummy_frame_regs): Ditto.
(hppa_pop_frame, hppa_read_fp): Ditto.
(skip_prologue_hard_way, hppa_frame_find_saved_regs): Ditto.
* cris-tdep.c (cris_examine, cris_pop_frame): Ditto.
* config/vax/nm-vax.h (REGISTER_U_ADDR): Ditto.
* config/sparc/tm-sparc.h (DEPRECATED_FP_REGNUM): Ditto.
* config/sparc/tm-sp64.h (DEPRECATED_FP_REGNUM): Ditto.
* config/s390/tm-s390.h (DEPRECATED_FP_REGNUM): Ditto.
* config/pa/tm-hppa64.h (DEPRECATED_FP_REGNUM): Ditto.
* config/ia64/tm-ia64.h (DEPRECATED_FP_REGNUM): Ditto.
* blockframe.c: Ditto for comments.
* arch-utils.h: Ditto for comments.
* arch-utils.c (legacy_virtual_frame_pointer): Ditto.
* alphanbsd-tdep.c (fetch_core_registers): Ditto.
* alphabsd-nat.c (fetch_inferior_registers): Ditto.
* alpha-tdep.h: Ditto for comments.
* alpha-tdep.c (alpha_cannot_fetch_register): Ditto.
(alpha_cannot_store_register): Ditto.
(alpha_push_dummy_frame): Ditto.
* alpha-nat.c (supply_gregset): Ditto.
* config/sparc/tm-sp64.h (DEPRECATED_TARGET_READ_FP): Update.
* config/pa/tm-hppa64.h (DEPRECATED_TARGET_READ_FP): Update.
* config/sparc/tm-sparc.h: Update comment.
* hppa-tdep.c (hppa_init_extra_frame_info): Use
deprecated_read_fp instead of TARGET_READ_FP.
(hppa_init_extra_frame_info, hppa_frame_chain): Ditto.
(hppa_push_dummy_frame, hppa_read_fp): Ditto.
* sparc-tdep.c (sparc_init_extra_frame_info): Use
deprecated_read_fp instead of read_fp.
* s390-tdep.c (s390_push_arguments): Ditto.
* ia64-tdep.c (ia64_gdbarch_init): Ditto.
* frame.h: Ditto in comments.
* frame.c (legacy_get_prev_frame): Ditto.
* dummy-frame.c (dummy_frame_this_id): Ditto.
* arm-tdep.c (arm_init_extra_frame_info): Ditto.
2003-04-28 Andrew Cagney <cagney@redhat.com>
* gdbint.texinfo (Target Architecture Definition): Replace
read_fp, TARGET_READ_FP and FP_REGNUM, with deprecated_read_fp,
DEPRECATED_TARGET_READ_FP and DEPRECATED_REGNUM.
2003-04-29 01:49:49 +00:00
Andrew Cagney
2555fe1a4f
2003-02-06 Andrew Cagney <ac131313@redhat.com>
...
* Makefile.in (symm-nat.o): Update dependencies.
(sparc-nat.o, procfs.o, proc-api.o, ppc-linux-nat.o): Ditto.
(lynx-nat.o, ia64-linux-nat.): Ditto.
* symm-nat.c, sparc-nat.c, procfs.c, proc-api.c: Include
"gdb_wait.h" instead of <wait.h> or <sys/wait.h>.
* ppc-linux-nat.c, lynx-nat.c, ia64-linux-nat.c: Ditto.
2003-02-07 04:49:34 +00:00
Andrew Cagney
44270758cd
2003-02-06 Andrew Cagney <ac131313@redhat.com>
...
* Makefile.in (inflow_h): Define.
(procfs.o, inflow.o, procfs.o): Update dependencies.
* inftarg.c (child_stop): Delete extern declaration of
inferior_process_group. Include "inflow.h".
* procfs.c (procfs_stop): Ditto. Include "inflow.h".
* inflow.c (PROCESS_GROUP_TYPE): Move definitions from here ...
* inflow.h (PROCESS_GROUP_TYPE): ... to here. New file.
(our_process_group, inferior_process_group): Extern declarations.
2003-02-07 04:21:34 +00:00
Andrew Cagney
df8f727469
2003-02-06 Andrew Cagney <ac131313@redhat.com>
...
* procfs.c: Include "gdb_assert.h".
2003-02-07 03:23:20 +00:00
Andrew Cagney
9a043c1d0c
2003-02-01 Andrew Cagney <ac131313@redhat.com>
...
* defs.h (host_pointer_to_address): Delete declaration.
(address_to_host_pointer): Delete declaration.
* utils.c (host_pointer_to_address): Delete function.
(address_to_host_pointer): Delete function.
* procfs.c (procfs_address_to_host_pointer): New function.
* procfs.c (proc_set_watchpoint): Use.
(procfs_can_use_hw_breakpoint): Update comments.
* somsolib.c (hpux_address_to_host_pointer_hack): New function.
(som_solib_add): Use.
* hppa-tdep.c (hppa_pointer_to_address_hack): New function.
* hppa-tdep.c (unwind_command): Use.
2003-02-01 23:34:05 +00:00
Michael Snyder
1a303dec0c
2002-06-05 Paul N. Hilfinger <hilfingr@otisco.mckusick.com>
...
* procfs.c (do_detach): Clear current signal, not just fault.
Corrects problem with breakpoint trap signal leaking to detached
process on Tru64.
2002-09-11 00:13:58 +00:00
Stephane Carrez
a790ad353e
Fix PR gdb/393:
...
* inflow.c (terminal_save_ours): New function to save terminal
settings.
* inferior.h (terminal_save_ours): Declare.
* target.c (debug_to_terminal_save_ours): New function.
(cleanup_target): Defaults to_terminal_save_ours.
(update_current_target): Inherit to_terminal_save_ours.
(setup_target_debug): Set to_terminal_save_ours.
* target.h (target_terminal_save_ours): New to save terminal settings.
(target_ops): New member to_terminal_save_ours.
* gnu-nat.c (init_gnu_ops): Set to_terminal_save_ours.
* hpux-thread.c (init_hpux_thread_ops): Likewise.
* inftarg.c (init_child_ops): Likewise.
* m3-nat.c (init_m3_ops): Likewise.
* procfs.c (init_procfs_ops): Likewise.
* wince.c (init_child_ops): Likewise.
* win32-nat.c (init_child_ops): Likewise.
* sol-thread.c (init_sol_thread_ops): Likewise.
2002-08-26 19:18:33 +00:00
Kevin Buettner
1e03ad2088
* procfs.c (procfs_can_use_hw_breakpoint): New function.
...
(init_procfs_ops): Define ``to_can_use_hw_breakpoint'' for procfs
target vector.
* config/mips/nm-irix5.h (TARGET_CAN_USE_HARDWARE_WATCHPOINT):
Delete. Add comment regarding this now-deleted target method.
2002-08-13 18:03:38 +00:00
Andrew Cagney
5ae5f59288
Fix some K&R isms.
2002-07-11 13:50:50 +00:00
Michael Snyder
6dbdc4a362
2002-02-13 Michael Snyder <msnyder@redhat.com>
...
* gcore.c (gcore_command): Use gcore_default_target instead of NULL.
(default_gcore_mach): Just return 0, work around a problem in bfd.
(default_gcore_target): OK to return NULL if exec_bfd is null.
(make_mem_sec): Use a cast, avoid a warning.
* procfs.c (find_memory_regions_callback): Use a cast instead of
calling host_pointer_to_address (which complains if
sizeof (host pointer) != sizeof (target pointer)).
(procfs_make_note_section): Avoid overflow in psargs string.
2002-02-14 01:57:36 +00:00
Michael Snyder
65554feff8
2002-02-13 Michael Snyder <msnyder@redhat.com>
...
* procfs.c (procfs_make_note_section): Make the default
implementation return an error.
2002-02-13 Rodney Brown <rbrown64@csc.com.au>
* procfs.c (procfs_make_note_section): Provide a default definition
(for alpha-dec-osf4.0f). Fix typos.
2002-02-11 Michael Snyder <msnyder@redhat.com>
* procfs.c: Include elf-bfd.h (for elfcore_write functions).
(gcore section): Ifdef for Solaris and Unixware only.
(procfs_do_thread_registers): Unixware needs one lwpstatus
per thread (not one prstatus or pstatus).
(procfs_make_note_section): Iterate only over kernel threads (lwps),
not over all gdb threads. For unixware, call elfcore_write_pstatus
once before iterating over threads.
2002-02-13 22:03:46 +00:00
Michael Snyder
be4d133316
2002-01-03 Michael Snyder <msnyder@redhat.com>
...
Implement a "generate-core-file" command in gdb, save target state.
* gcore.c: New file. Implement new command 'generate-core-file'.
Save a corefile image of the current state of the inferior.
* linux-proc.c: Add linux-specific code for saving corefiles.
* target.h (struct target_ops): Add new target vectors for saving
corefiles; to_find_memory_regions and to_make_corefile_notes.
(target_find_memory_regions): New macro.
(target_make_corefile_notes): New macro.
* target.c (update_current_target): Inherit new target methods.
(dummy_find_memory_regions): New place-holder method.
(dummy_make_corefile_notes): New place-holder method.
(init_dummy_target): Initialize new dummy target vectors.
* exec.c (exec_set_find_memory_regions): New function.
Allow the exec_ops vector for memory regions to be taken over.
(exec_make_note_section): New function, target vector method.
* defs.h (exec_set_find_memory_regions): Export prototype.
* procfs.c (proc_find_memory_regions): New function, corefile method.
(procfs_make_note_section): New function, corefile method.
(init_procfs_ops): Set new target vector pointers.
(find_memory_regions_callback): New function.
(procfs_do_thread_registers): New function.
(procfs_corefile_thread_callback): New function.
* sol-thread.c (sol_find_memory_regions): New function.
(sol_make_note_section): New function.
(init_sol_thread_ops): Initialize new target vectors.
* inftarg.c (inftarg_set_find_memory_regions): New function.
Allow to_find_memory_regions vector to be taken over.
(inftarg_set_make_corefile_notes): New function.
Allow to_make_corefile_notes vector to be taken over.
* thread-db.c (thread_db_new_objfile): Don't activate thread-db
interface layer if not target_has_execution (may be a corefile).
* config/i386/linux.mh: Add gcore.o to NATDEPFILES.
* config/sparc/sun4sol2.mh: Ditto.
* config/alpha/alpha-linux.mh: Ditto.
* config/arm/linux.mh: Ditto.
* config/i386/x86-64linux.mh: Ditto.
* config/ia64/linux.mh: Ditto.
* config/m68k/linux.mh: Ditto.
* config/mips/linux.mh: Ditto.
* config/powerpc/linux.mh: Ditto.
* config/sparc/linux.mh: Ditto.
2002-01-09 00:37:02 +00:00
Michael Snyder
831e682efe
2001-12-28 Michael Snyder <msnyder@redhat.com>
...
Abstract the functionality of iterating over mapped memory
regions into a general purpose iterator function.
* procfs.c (iterate_over_mappings): New function, general purpose
iterator for memory sections.
(proc_iterate_over_mappings): Reimplement using iterate_over_mappings.
(solib_mappings_callback): New function, callback for above.
(info_proc_mappings): Reimpliment using iterate_over_mappings.
(info_mappings_callback): New function, callback for above.
* procfs.c (proc_set_watchpoint): Add cast to suppress warning.
2002-01-03 20:50:25 +00:00
Michael Snyder
388faa4837
2001-12-21 Michael Snyder <msnyder@redhat.com>
...
* procfs.c (info_proc_cmd): Add the 'mappings' sub-command that
was dropped a few years ago, when procfs.c was rewritten.
(info_proc_mappings): New function, implement 'info proc mappings'.
(mappingflags): New function.
(_initialize_procfs): Document new option to 'info proc' command.
2001-12-28 19:47:08 +00:00
Kevin Buettner
1d5e060273
Allocate/free space associated with saved_entryset and saved_exitset.
2001-07-07 21:55:28 +00:00