Luis Machado
dfd4cc6311
* aarch64-linux-nat.c: Replace PIDGET with ptid_get_pid.
...
Replace TIDGET with ptid_get_lwp.
Replace GET_LWP with ptid_get_lwp.
* aix-thread.c (BUILD_THREAD, BUILD_LWP): Remove.
Replace BUILD_THREAD with ptid_build.
Replace BUILD_LWP with ptid_build.
Replace PIDGET with ptid_get_pid.
Replace TIDGET with ptid_get_lwp.
* alphabsd-nat.c: Replace PIDGET with ptid_get_pid.
* amd64-linux-nat.c: Replace PIDGET with ptid_get_pid.
Replace TIDGET with ptid_get_lwp.
* amd64bsd-nat.c: Replace PIDGET with ptid_get_pid.
* arm-linux-nat.c: Replace PIDGET with ptid_get_pid.
Replace TIDGET with ptid_get_lwp.
Replace GET_LWP with ptid_get_lwp.
* armnbsd-nat.c: Replace PIDGET with ptid_get_pid.
* auxv.c: Likewise.
* breakpoint.c: Likewise.
* common/ptid.c (ptid_is_pid): Condense check for
null_ptid and minus_one_ptid.
(ptid_lwp_p): New function.
(ptid_tid_p): New function.
* common/ptid.h: Update comments for accessors.
(ptid_lwp_p): New prototype.
(ptid_tid_p): New prototype.
* defs.h (PIDGET, TIDGET, MERGEPID): Do not define.
* gcore.c: Replace PIDGET with ptid_get_pid.
* gdbthread.h: Likewise.
* gnu-nat.c: Likewise.
* hppa-linux-nat.c: Replace PIDGET with ptid_get_pid.
Replace TIDGET with ptid_get_lwp.
* hppabsd-nat.c: Replace PIDGET with ptid_get_pid.
* hppanbsd-nat.c: Likewise.
* i386-linux-nat.c: Replace PIDGET with ptid_get_pid.
Replace TIDGET with ptid_get_lwp.
* i386bsd-nat.c: Replace PIDGET with ptid_get_pid.
* ia64-linux-nat.c: Replace PIDGET with ptid_get_pid.
* infcmd.c: Likewise.
* inferior.h: Likewise.
* inflow.c: Likewise.
* infrun.c: Likewise.
* linux-fork.c: Likewise.
* linux-nat.c: Replace PIDGET with ptid_get_pid.
Replace GET_PID with ptid_get_pid.
Replace is_lwp with ptid_lwp_p.
Replace GET_LWP with ptid_get_lwp.
Replace BUILD_LWP with ptid_build.
2013-09-30 11:50:12 +00:00
Joel Brobecker
11cb8762fc
thread support broken on ppc-aix.
...
Thread support got broken when adding 64bit support on ppc-aix.
Upon digging further, I found that the following patch...
| * gdb_ptrace.h: Use ptrace64 instead of ptrace if HAVE_PTRACE64
| is defined.
| * rs6000-nat.c: Check for __ld_info64_ if compiling 64 BIT gdb.
| (rs6000_ptrace32): Call ptrace64 instead of ptrace if present.
| (rs6000_ptrace64): Call ptace64 instead of ptracex if present.
| * configure.ac: Check for ptrace64.
| * configure, config.in: Regenerate.
... is responsible for this regression:
(gdb) x /x &__n_pthreads
0xf06a8258 <__n_pthreads>: Cannot access memory at address 0xf06a8258
Prior to the patch, we have:
(gdb) x /x &__n_pthreads
0xf06a8258 <__n_pthreads>: 0x00000003
The problem occurs inside rs6000_ptrace32, while calling ptrace64.
The address is given to rs6000_ptrace32 as an "int *", while
ptrace64 takes a "long long". The cast causes the address to be
sign-extended, which results in GDB trying to read the wrong address.
This patch fixes the issue by casting the address to a "uintptr_t"
instead, and letting the compiler do the implicit conversion to
"long long" in the function call.
gdb/ChangeLog:
* rs6000-nat.c (rs6000_ptrace32): Cast "addr" to "uintptr_t"
instead of "long long" in call to ptrace64.
2013-08-29 21:02:15 +00:00
Pierre Muller
1ed3ee940d
ARI fix: Push # directives to start of line.
...
* rs6000-nat.c (rs6000_ptrace32, rs6000_ptrace64): Rule applied.
2013-08-23 06:51:18 +00:00
Ulrich Weigand
b08ee99f15
2013-08-07 Raunaq Bathija <raunaq12@in.ibm.com>
...
Ulrich Weigand <uweigand@de.ibm.com>
* gdb_ptrace.h: Use ptrace64 instead of ptrace if HAVE_PTRACE64
is defined.
* rs6000-nat.c: Check for __ld_info64_ if compiling 64 BIT gdb.
(rs6000_ptrace32): Call ptrace64 instead of ptrace if present.
(rs6000_ptrace64): Call ptace64 instead of ptracex if present.
* configure.ac: Check for ptrace64.
* configure, config.in: Regenerate.
2013-08-07 14:39:57 +00:00
Pedro Alves
d8d2a3ee47
Normalize on PATH_MAX instead of MAXPATHLEN throughout.
...
With the pathmax gnulib module in place, we can use PATH_MAX
consistently throughout, instead of the current mixbag of PATH_MAX and
MAXPATHLEN uses. It's no longer necessary to include sys/param.h
(supposedly, I can't check all ports touched here) for MAXPATHLEN.
Don't remove sys/param.h from GDB's configure.ac, as later tests in
the file use HAVE_SYS_PARAM_H checks.
Tested on x86_64 Fedora 17.
Also cross-built for --host=i686-w64-mingw32, and --host=i586-pc-msdosdjgpp.
gdb/
2013-07-01 Pedro Alves <palves@redhat.com>
* defs.h: Include "pathmax.h".
* utils.c: Don't include sys/param.h.
(gdb_realpath): Remove code that checks for MAXPATHLEN.
* solib-ia64-hpux.c (ia64_hpux_handle_load_event): Use PATH_MAX
instead of MAXPATHLEN.
* solib-sunos.c: Don't include sys/param.h.
* xcoffread.c: Don't include sys/param.h.
* bsd-kvm.c: Don't include sys/param.h.
* darwin-nat.c: Don't include sys/param.h.
(darwin_pid_to_exec_file): Use PATH_MAX instead of MAXPATHLEN.
* darwin-nat-info.c: Don't include sys/param.h.
* fbsd-nat.c (fbsd_pid_to_exec_file): Use PATH_MAX instead of
MAXPATHLEN.
* i386obsd-nat.c: Don't include sys/param.h.
* inf-child.c: Don't include sys/param.h.
(inf_child_fileio_readlink): Use PATH_MAX instead of MAXPATHLEN.
* linux-fork.c: Don't include sys/param.h.
(fork_save_infrun_state): Use PATH_MAX instead of MAXPATHLEN.
* linux-nat.c: Don't include sys/param.h.
(linux_child_pid_to_exec_file, linux_proc_pending_signals)
(linux_proc_pending_signals): Use PATH_MAX instead of MAXPATHLEN.
* m68klinux-nat.c: Don't include sys/param.h.
* nbsd-nat.c: Don't include sys/param.h.
(nbsd_pid_to_exec_file): Use PATH_MAX instead of MAXPATHLEN.
* ppc-linux-nat.c: Don't include sys/param.h.
* rs6000-nat.c: Don't include sys/param.h.
* spu-linux-nat.c. Don't include sys/param.h.
* windows-nat.c: Don't include sys/param.h.
* xtensa-linux-nat.c: Don't include sys/param.h.
* config/i386/nm-fbsd.h: Don't include sys/param.h.
gdb/gdbserver/
2013-07-01 Pedro Alves <palves@redhat.com>
* server.h: Include "pathmax.h".
* linux-low.c: Don't include sys/param.h.
(linux_pid_exe_is_elf_64_file): Use PATH_MAX instead of
MAXPATHLEN.
* win32-low.c: Don't include sys/param.h.
(win32_create_inferior): Use PATH_MAX instead of MAXPATHLEN.
2013-07-01 11:28:30 +00:00
Joel Brobecker
356a523362
ppc-aix core file relocation.
...
The current code attempts to provide relocation support when debugging
core files via the rs6000_xfer_partial method of the rs6000-nat
target_ops vector. However, this target_ops vector does not get pushed
on the target stack at all when debugging core files, thus bypassing
completely that part of the code.
This patch fixes the problem by extending corelow's core_xfer_partial
into handling the TARGET_OBJECT_LIBRARIES_AIX object.
gdb/ChangeLog:
* gdbarch.sh (core_xfer_shared_libraries_aix): New method.
* gdbarch.h, gdbarch.c: Regenerate.
* corelow.c (core_xfer_partial): Add TARGET_OBJECT_LIBRARIES_AIX
handling.
* rs6000-aix-tdep.h: New file.
* Makefile.in (HFILES_NO_SRCDIR): Add rs6000-aix-tdep.h.
* rs6000-aix-tdep.c: Include "rs6000-aix-tdep.h" and
"xml-utils.h".
(struct field_info, struct ld_info_desc): New types.
(ld_info32_desc, ld_info64_desc): New static constants.
(struct ld_info): New type.
(rs6000_aix_extract_ld_info): New function.
(rs6000_aix_shared_library_to_xml): Likewise.
(rs6000_aix_ld_info_to_xml): Likewise.
(rs6000_aix_core_xfer_shared_libraries_aix): Likewise.
(rs6000_aix_init_osabi): Add call to
set_gdbarch_core_xfer_shared_libraries_aix.
* rs6000-nat.c: Add "rs6000-aix-tdep.h" include.
Remove "xml-utils.h" include.
(LdInfo): Delete typedef.
(ARCH64_DECL, LDI_FIELD, LDI_NEXT, LDI_FD, LDI_FILENAME):
Delete macros.
(rs6000_ptrace_ldinfo): Change return type to gdb_byte *.
Adjust code accordingly.
(rs6000_core_ldinfo): Delete, folded into
rs6000_aix_core_xfer_shared_libraries_aix.
(rs6000_xfer_shared_library): Delete.
(rs6000_xfer_shared_libraries): Reimplement.
2013-05-15 12:26:14 +00:00
Joel Brobecker
2f565103af
rs6000-nat.c:rs6000_core_ldinfo: Remove \n at end of error message.
...
gdb/ChangeLog:
* rs6000-nat.c (rs6000_core_ldinfo): Remove '\n' at end of
error message (ARI fix).
2013-05-07 12:36:13 +00:00
Joel Brobecker
8c56e11254
AIX: Change XML to use library-list-aix instead of library-list.
...
This is more consistent with what we do with other similar XML lists,
and avoids a potential confusion with the library-list XML list.
gdb/ChangeLog:
* features/library-list-aix.dtd: Replace library-list by
library-list-aix.
* rs6000-nat.c: Replace library-list by library-list-aix
throughout.
* solib-aix.c: Likewise.
2013-05-07 09:50:49 +00:00
Joel Brobecker
ff99b71b22
Rename TARGET_OBJECT_AIX_LIBRARIES to TARGET_OBJECT_LIBRARIES_AIX
...
More consistent with the name of other similar object names.
gdb/ChangeLog:
* target.h (enum target_object) [TARGET_OBJECT_LIBRARIES_AIX]:
Renames TARGET_OBJECT_AIX_LIBRARIES.
* rs6000-nat.c: Replace TARGET_OBJECT_AIX_LIBRARIES with
TARGET_OBJECT_LIBRARIES_AIX throughout.
* solib-aix.c: Likwise.
2013-05-07 09:50:41 +00:00
Joel Brobecker
4d1eb6b4d2
Reimplement shared library support on ppc-aix...
...
... using the target_so_ops framework.
gdb/ChangeLog:
* target.h (TARGET_OBJECT_AIX_LIBRARIES): New target_object enum.
* features/library-list-aix.dtd: New file.
* solib-aix.h, solib-aix.c: New file.
* rs6000-aix-tdep.c: #include "solib.h" and "solib-aix.h".
(rs6000_find_toc_address_hook): Delete.
(rs6000_push_dummy_call): Rewrite code setting the TOC value.
(rs6000_aix_init_osabi): Register solib_aix_so_ops.
* rs6000-nat.c: Remove "xcoffsolib.h" include. Include
"xml-utils.h".
(map_vmap, vmap_exec, vmap_ldinfo, add_vmap, objfile_symbol_add)
(vmap_symtab, fixup_breakpoints): Delete.
(rs6000_xfer_shared_libraries): New function.
(rs6000_xfer_partial): Add TARGET_OBJECT_AIX_LIBRARIES handling.
(vmap_secs, bss_data_overlap, vmap_add_symbols): Delete.
(xcoff_relocate_symtab, xcoff_relocate_core): Delete.
(rs6000_ptrace_ldinfo, rs6000_core_ldinfo)
(rs6000_xfer_shared_library): New function.
(find_toc_address): Delete.
(_initialize_rs6000_nat): Do not set rs6000_find_toc_address_hook.
* rs6000-tdep.h (rs6000_find_toc_address_hook): Remove.
* xcoffread.c (record_minimal_symbol): Reloate symbol address
before creating minimal symbol. Adjust function description
accordingly.
(scan_xcoff_symtab): Replace call to
prim_record_minimal_symbol_and_info by call to
record_minimal_symbol.
(xcoff_symfile_offsets): Reimplement mostly as a wrapper
around default_symfile_offsets.
* configure.tgt: Add solib-aix.o to gdb_target_obs for
powerpc-aix targets.
* config/rs6000/nm-rs6000.h: Delete.
* config/powerpc/aix.mh (NAT_FILE): Delete.
(NATDEPFILES): Remove xcoffsolib.o.
* Makefile.in (XMLFILES): Add library-list-aix.dtd.
(ALL_TARGET_OBS): Add solib-aix.o.
(HFILES_NO_SRCDIR): Remove xcoffsolib.h and
config/rs6000/nm-rs6000.h. Add solib-aix.h.
(ALLDEPFILES): Add solib-aix.c. Remove xcoffsolib.c.
* xcoffsolib.h, xcoffsolib.c: Delete.
* solib.c (reload_shared_libraries): Remove reference to
SOLIB_CREATE_INFERIOR_HOOK.
* breakpoint.c (handle_solib_event): Remove reference to SOLIB_ADD.
(disable_breakpoints_in_shlibs): Remove reference to PC_SOLIB.
(momentary_bkpt_re_set): Replace SOLIB_ADD by solib_add in
comment.
* corelow.c (deprecated_core_resize_section_table): Delete.
* exec.c: Remove include of xcoffsolib.h".
(map_vmap, vmap): Delete.
(exec_close_1): Remove references to vmap.
(exec_file_attach): Remove vmap handling code, and reference
to DEPRECATED_IBM6000_TARGET.
(bfdsec_to_vmap): Delete.
(exec_files_info): Remove block of code handling VMAP.
* infcmd.c (post_create_inferior): Remove reference to
SOLIB_CREATE_INFERIOR_HOOK and SOLIB_ADD.
* infrun.c (follow_exec): Remove reference to
SOLIB_CREATE_INFERIOR_HOOK.
* stack.c (print_frame): Remove reference to PC_SOLIB.
* solib-dsbt.c (dsbt_current_sos): Adjust comment.
(dsbt_relocate_main_executable): Likewise.
* solib-frv.c (frv_current_sos): Likewise.
gdb/doc/ChangeLog:
* gdbint.texinfo (Algorithms): Remove entries documenting
DEPRECATED_IBM6000_TARGET, SOLIB_ADD, and
SOLIB_CREATE_INFERIOR_HOOK.
2013-05-06 14:15:50 +00:00
Joel Brobecker
9f9e404c04
Delete rs6000-nat.c:fixup_breakpoints extern declaration.
...
This function does not exist...
gdb/ChangeLog:
* rs6000-nat.c (fixup_breakpoints): Delete declaration.
2013-03-26 00:13:08 +00:00
Joel Brobecker
8333c85bf8
ppc-aix: .bss relocation problem when overlapping with the .data section
...
It has been observed that the GNU linker can sometimes improperly
set the address of the .bss section in such a way that it overlaps
with the end of the .data section. This causes problems in GDB
when trying to print the value of variables located in that section,
because the loader appears to be gracefully but silently adjusting
the address of the .bss section to avoid the overlap, thus causing
a mismatch between the address where GDB thinks it is, vs the address
where it actually lives.
This patch works around the problem while it a fix in the linker
is being explored.
gdb/ChangeLog:
* rs6000-nat.c (bss_data_overlap): New function.
(vmap_symtab): Use it to adjust the .bss section's offset.
2013-01-01 08:37:20 +00:00
Joel Brobecker
28e7fd6234
Update years in copyright notice for the GDB files.
...
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
2013-01-01 06:33:28 +00:00
Tom Tromey
f5656eadf4
* gdbarch.sh (target_gdbarch): Remove macro.
...
(get_target_gdbarch): Rename to target_gdbarch.
* gdbarch.c, gdbarch.h: Rebuild.
* ada-tasks.c, aix-thread.c, amd64-linux-nat.c, arch-utils.c,
arm-tdep.c, auxv.c, breakpoint.c, bsd-uthread.c, corefile.c,
darwin-nat-info.c, dcache.c, dsrec.c, exec.c, fbsd-nat.c,
filesystem.c, gcore.c, gnu-nat.c, i386-darwin-nat.c, i386-nat.c,
ia64-vms-tdep.c, inf-ptrace.c, infcmd.c, jit.c, linux-nat.c,
linux-tdep.c, linux-thread-db.c, m32r-rom.c, memattr.c,
mep-tdep.c, microblaze-tdep.c, mips-linux-nat.c,
mips-linux-tdep.c, mips-tdep.c, monitor.c, moxie-tdep.c,
nto-procfs.c, nto-tdep.c, ppc-linux-nat.c, proc-service.c,
procfs.c, progspace.c, ravenscar-thread.c, record.c,
remote-m32r-sdi.c, remote-mips.c, remote-sim.c, remote.c,
rl78-tdep.c, rs6000-nat.c, rx-tdep.c, s390-nat.c, sol-thread.c,
solib-darwin.c, solib-dsbt.c, solib-frv.c, solib-ia64-hpux.c,
solib-irix.c, solib-pa64.c, solib-som.c, solib-spu.c,
solib-sunos.c, solib-svr4.c, solib.c, spu-linux-nat.c,
spu-multiarch.c, spu-tdep.c, symfile-mem.c, symfile.c, symtab.c,
target-descriptions.c, target.c, target.h, tracepoint.c,
windows-nat.c, windows-tdep.c, xcoffsolib.c, cli/cli-dump.c,
common/agent.c, mi/mi-interp.c, python/py-finishbreakpoint.c,
python/py-inferior.c, python/python.c: Update.
2012-11-09 19:58:03 +00:00
Joel Brobecker
8f0ee2eb7c
gdb_bfd_unref failed assertion on AIX.
...
Trying to run any program on AIX triggers a failed assertion:
(gdb) run
Starting program: /[...]/simple_main
/[...]/gdb_bfd.c:288: internal-error: gdb_bfd_unref: Assertion `gdata->refc >= 1' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
What happens is that we have a loop where we forgot to update
the value of "last", resulting in the loop unref'ing the same
BFD over and over again. We bomb the second time around, when
triggering an assertion on the ref counter.
gdb/ChangeLog:
* rs6000-nat.c (add_vmap): Set "last" to "next" after having
unref'ed it.
2012-10-02 15:05:42 +00:00
Pierre Muller
9210735600
* procfs.c: Add gdb_bfd header.
...
* rs6000-nat.c: Likewise.
* solib-pa64.c: Likewise.
* spu-linux-nat.c: Likewise.
* windows-nat.c: Likewise.
2012-09-26 21:23:11 +00:00
Tom Tromey
1c00ec6b06
* windows-nat.c (windows_make_so): Use gdb_bfd_open.
...
* symfile.c (bfd_open_maybe_remote): Use gdb_bfd_open.
(symfile_bfd_open): Likewise.
(generic_load): Likewise.
* solib.c (solib_bfd_fopen): Use gdb_bfd_open.
* solib-pa64.c (pa64_solib_create_inferior_hook): Use
gdb_bfd_open.
* solib-darwin.c (darwin_solib_get_all_image_info_addr_at_init):
Use gdb_bfd_open.
* rs6000-nat.c (add_vmap): Use gdb_bfd_open.
* remote-mips.c (mips_load_srec): Use gdb_bfd_open.
(pmon_load_fast): Likewise.
* remote-m32r-sdi.c (m32r_load): Use gdb_bfd_open.
* procfs.c (insert_dbx_link_bpt_in_file): Use gdb_bfd_open.
* machoread.c (macho_symfile_read_all_oso): Use gdb_bfd_open.
(macho_check_dsym): Likewise.
* m32r-rom.c (m32r_load): Use gdb_bfd_open.
(m32r_upload_command): Likewise.
* gdb_bfd.h (gdb_bfd_cache): Declare.
* gdb_bfd.c (struct gdb_bfd_data): New.
(gdb_bfd_cache): New global.
(struct gdb_bfd_cache_search): New.
(hash_bfd): New function.
(eq_bfd): Likewise.
(gdb_bfd_open): Likewise.
(gdb_bfd_ref): Allocate a gdb_bfd_data and attach to the BFD.
(gdb_bfd_unref): Remove closed BFD from cache. Update for
gdb_bfd_data.
* exec.c (exec_file_attach): Use gdb_bfd_open.
* dsrec.c (load_srec): Use gdb_bfd_open.
2012-08-22 16:24:39 +00:00
Tom Tromey
da1cc82f30
* rs6000-nat.c (add_vmap): Rewrite archive loop. Fix reference
...
counting.
* exec.c (exec_close_1): Unconditionally release vmap's BFD.
(map_vmap): Acquire a reference to the BFD.
2012-07-23 18:54:26 +00:00
Tom Tromey
8ac244b433
* coffread.c (coff_symfile_read): Make a cleanup for 'debugfile'
...
and 'abfd'.
* elfread.c (elf_symfile_read): Make a cleanup for 'debugfile'
and 'abfd'.
* jit.c (jit_bfd_try_read_symtab): Make a cleanup for 'nbfd'.
* machoread.c (macho_add_oso_symfile): Make a cleanup for
'abfd'.
(macho_symfile_read): Make a cleanup for 'dsym_bfd'.
* objfiles.c (allocate_objfile): Acquire a new reference.
* rs6000-nat.c (add_vmap): Don't acquire a BFD reference.
* solib.c (solib_read_symbols): Don't acquire a BFD reference.
* spu-linux-nat.c (spu_symbol_file_add_from_memory): Make
a cleanup for 'nbfd'.
* symfile-mem.c (symbol_file_add_from_memory): Make a cleanup
for 'nbfd'.
* symfile.c (symbol_file_add_with_addrs_or_offsets): Don't
make a cleanup for 'abfd'.
(symbol_file_add): Make a BFD cleanup.
2012-07-23 14:58:44 +00:00
Tom Tromey
64c311498e
* cli/cli-dump.c (bfd_openr_with_cleanup): Use gdb_bfd_openr.
...
(bfd_openw_with_cleanup): Use gdb_bfd_openw.
* corelow.c (core_open): Use gdb_bfd_fopen.
* dsrec.c (load_srec): Use gdb_bfd_openr.
* exec.c (exec_file_attach): Use gdb_bfd_fopen.
* gcore.c (gcore_memory_sections): Use gdb_bfd_openw.
* gdb_bfd.c (gdb_bfd_fopen, gdb_bfd_openr, gdb_bfd_openw)
(gdb_bfd_openr_iovec, gdb_bfd_openr_next_archived_file)
(gdb_bfd_fdopenr): New functions.
* gdb_bfd.h (gdb_bfd_fopen, gdb_bfd_openr, gdb_bfd_openw)
(gdb_bfd_openr_iovec, gdb_bfd_openr_next_archived_file)
(gdb_bfd_fdopenr): Declare.
* jit.c (bfd_open_from_target_memory): Use gdb_bfd_openr_iovec.
* m32-rom.c (m32r_load, m32r_upload_command): Use gdb_bfd_openr.
* machoread.c (macho_symfile_read_all_oso): Use gdb_bfd_openr,
gdb_bfd_openr_next_archived_file.
(macho_check_dsym): Use gdb_bfd_openr.
(macho_add_oso_symfile): Don't call gdb_bfd_stash_filename.
* procfs.c (insert_dbx_link_bpt_in_file): Use gdb_bfd_fdopenr.
* remote-m32r-sdi.c (m32r_load): Use gdb_bfd_openr.
* remote-mips.c (mips_load_srec, pmon_load_fast): Use
gdb_bfd_openr.
* remote.c (remote_bfd_open): Use gdb_bfd_openr_iovec.
* rs6000-nat.c (add_vmap): Use gdb_bfd_openr, gdb_bfd_fdopenr,
gdb_bfd_openr_next_archived_file.
* solib-darwin.c (darwin_solib_get_all_image_info_addr_at_init):
Use gdb_bfd_openr.
* solib-pa64.c (pa64_solib_create_inferior_hook): Use
gdb_bfd_openr.
* solib-spu.c (spu_bfd_fopen): Use gdb_bfd_openr_iovec.
* solib.c (solib_bfd_fopen): Use gdb_bfd_fopen.
* spu-linux-nat.c (spu_bfd_open): Use gdb_bfd_openr_iovec.
* symfile.c (bfd_open_maybe_remote): Use gdb_bfd_openr.
(symfile_bfd_open): Use gdb_bfd_fopen.
(generic_load): Use gdb_bfd_openr.
* windows-nat.c (windows_make_so): Use gdb_bfd_openr.
2012-07-23 14:57:58 +00:00
Tom Tromey
520b0001c1
* bfd-target.c (target_bfd_reopen): Update.
...
* cli/cli-dump.c (bfd_openr_with_cleanup)
(bfd_openw_with_cleanup): Update.
* corelow.c (core_open): Update.
* dsrec.c (load_srec): Update.
* exec.c (exec_file_attach): Update.
* gcore.c (create_gcore_bfd): Update.
* gdb_bfd.c (gdb_bfd_ref): Return void.
(gdb_bfd_open): Update.
* gdb_bfd.h (gdb_bfd_ref): Return void.
Update comments.
* jit.c (jit_bfd_try_read_symtab): Update.
* m32r-rom.c (m32r_load, m32r_upload_command): Update.
* machoread.c (macho_symfile_read_all_oso): Update.
(macho_check_dsym): Update.
* procfs.c (insert_dbx_link_bpt_in_file): Update.
* remote-m32r-sdi.c (m32r_load): Update.
* remote-mips.c (mips_load_srec, pmon_load_fast): Update.
* rs6000-nat.c (add_vmap): Update.
* solib-darwin.c (darwin_solib_get_all_image_info_addr_at_init):
Update.
* solib-pa64.c (pa64_solib_create_inferior_hook): Update.
* solib-spu.c (spu_bfd_open): Update.
* solib.c (solib_bfd_fopen, solib_read_symbols): Update.
* spu-linux-nat.c (spu_bfd_open): Update.
* symfile.c (bfd_open_maybe_remote, symfile_bfd_open)
(generic_load): Update.
* windows-nat.c (windows_make_so): Update.
2012-07-23 14:56:11 +00:00
Tom Tromey
a4453b7e0b
* symfile.c (symfile_bfd_open): Don't copy name. Call
...
gdb_bfd_stash_filename.
(load_command): Open the new BFD before freeing the old.
(bfd_open_maybe_remote): Call gdb_bfd_stash_filename.
* symfile-mem.c (symbol_file_add_from_memory): Don't copy name.
Call gdb_bfd_stash_filename.
* spu-linux-nat.c (spu_bfd_open): Don't copy name.
* solib-spu.c (spu_bfd_fopen): Don't copy name. Call
gdb_bfd_stash_filename.
* solib-darwin.c (darwin_solib_get_all_image_info_addr_at_init):
Free found_pathname.
* rs6000-nat.c (add_vmap): Don't copy filename. Call
gdb_bfd_stash_filename.
* remote.c (remote_bfd_open): Call gdb_bfd_stash_filename.
* machoread.c (macho_add_oso_symfile): Call
gdb_bfd_stash_filename.
(macho_symfile_read_all_oso): Arrange to free archive_name. Call
gdb_bfd_stash_filename.
(macho_check_dsym): Don't copy filename. Call
gdb_bfd_stash_filename.
* jit.c (bfd_open_from_target_memory): Don't copy the filename.
* gdb_bfd.c (gdb_bfd_stash_filename): New function.
* gdb_bfd.h (gdb_bfd_stash_filename): Declare.
* gcore.c (create_gcore_bfd): Call gdb_bfd_stash_filename.
* exec.c (exec_close): Don't free the BFD's filename.
(exec_file_attach): Don't copy the filename. Call
gdb_bfd_stash_filename.
* corelow.c (core_close): Don't free the BFD's filename.
(core_open): Call gdb_bfd_stash_filename.
* corefile.c (reopen_exec_file): Remove #if 0 code.
* solib.c (solib_bfd_fopen): Call gdb_bfd_stash_filename. Free
pathname.
* dwarf2read.c (try_open_dwo_file): Call gdb_bfd_stash_filename.
2012-07-18 19:34:57 +00:00
Tom Tromey
cbb099e886
* dwarf2read.c (try_open_dwo_file): Use gdb_bfd_ref and
...
gdb_bfd_unref.
(free_dwo_file): Use gdb_bfd_unref.
* cli/cli-dump.c: Include gdb_bfd.h.
(bfd_openw_with_cleanup): Use gdb_bfd_ref.
(bfd_openr_with_cleanup): Likewise.
* windows-nat.c (windows_make_so): Use gdb_bfd_ref,
gdb_bfd_unref.
* utils.c: Include gdb_bfd.h.
(do_bfd_close_cleanup): Use gdb_bfd_unref.
* symfile.c: Include gdb_bfd.h.
(separate_debug_file_exists): Use gdb_bfd_unref.
(bfd_open_maybe_remote): Use gdb_bfd_ref.
(symfile_bfd_open): Use gdb_bfd_ref, gdb_bfd_unref.
(generic_load): Use gdb_bfd_ref.
(reread_symbols): Use gdb_bfd_unref.
* symfile-mem.c: Include gdb_bfd.h.
(symbol_file_add_from_memory): Use make_cleanup_bfd_close.
* spu-linux-nat.c (spu_bfd_open): Use gdb_bfd_ref, gdb_bfd_unref.
* solib.c: Include gdb_bfd.h.
(solib_bfd_fopen): Use gdb_bfd_ref.
(solib_bfd_open): Use gdb_bfd_unref.
(free_so_symbols): Use gdb_bfd_unref.
(reload_shared_libraries_1): Use gdb_bfd_unref.
* solib-spu.c: Include gdb_bfd.h.
(spu_bfd_fopen): Use gdb_bfd_ref, gdb_bfd_unref.
* solib-pa64.c (pa64_solib_create_inferior_hook): Use gdb_bfd_ref,
gdb_bfd_unref.
* solib-frv.c: Include gdb_bfd.h.
(enable_break2): Use gdb_bfd_unref.
* solib-dsbt.c: Include gdb_bfd.h.
(enable_break2): Use gdb_bfd_unref.
* solib-darwin.c: Include gdb_bfd.h.
(darwin_solib_get_all_image_info_addr_at_init): Use gdb_bfd_ref,
gdb_bfd_unref.
(darwin_bfd_open): Use gdb_bfd_unref.
* rs6000-nat.c (add_vmap): Use gdb_bfd_ref, gdb_bfd_unref.
* remote-mips.c: Include gdb_bfd.h.
(mips_load_srec): Use gdb_bfd_ref.
(pmon_load_fast): Use gdb_bfd_ref.
* remote-m32r-sdi.c: Include gdb_bfd.h.
(m32r_load): Use gdb_bfd_ref.
* record.c: Include gdb_bfd.h.
(record_save_cleanups): Use gdb_bfd_unref.
(cmd_record_save): Use gdb_bfd_unref.
* procfs.c (insert_dbx_link_bpt_in_file): Use gdb_bfd_ref,
gdb_bfd_unref.
* objfiles.h (gdb_bfd_close_or_warn): Remove.
(gdb_bfd_ref, gdb_bfd_unref): Move to gdb_bfd.h.
* objfiles.c: Include gdb_bfd.h.
(free_objfile): Use gdb_bfd_unref.
(gdb_bfd_close_or_warn, gdb_bfd_ref, gdb_bfd_unref): Move to
gdb_bfd.c.
* machoread.c (macho_add_oso_symfile): Use gdb_bfd_unref.
(macho_symfile_read_all_oso): Use gdb_bfd_ref, gdb_bfd_unref.
(macho_check_dsym): Likewise.
* m32r-rom.c: Include gdb_bfd.h.
(m32r_load): Use gdb_bfd_ref.
(m32r_upload_command): Use gdb_bfd_ref.
* jit.c: Include gdb_bfd.h.
(jit_bfd_try_read_symtab): Use gdb_bfd_ref, gdb_bfd_unref.
* gdb_bfd.h: New file.
* gdb_bfd.c: New file.
* gcore.c: Include gdb_bfd.h.
(create_gcore_bfd): Use gdb_bfd_ref.
(do_bfd_delete_cleanup): Use gdb_bfd_unref.
(gcore_command): Use gdb_bfd_unref.
* exec.c: Include gdb_bfd.h.
(exec_close): Use gdb_bfd_unref.
(exec_close_1): Use gdb_bfd_unref.
(exec_file_attach): Use gdb_bfd_ref.
* elfread.c: Include gdb_bfd.h.
(build_id_verify): Use gdb_bfd_unref.
* dsrec.c: Include gdb_bfd.h.
(load_srec): Use gdb_bfd_ref.
* corelow.c: Include gdb_bfd.h.
(core_close): Use gdb_bfd_unref.
(core_open): Use gdb_bfd_ref.
* bfd-target.c: Include gdb_bfd.h.
(target_bfd_xclose): Use gdb_bfd_unref.
(target_bfd_reopen): Use gdb_bfd_ref.
* Makefile.in (SFILES): Add gdb_bfd.c.
(HFILES_NO_SRCDIR): Add gdb_bfd.h.
(COMMON_OBS): Add gdb_bfd.o.
2012-07-18 19:33:34 +00:00
Pedro Alves
a493e3e2e4
gdb/
...
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
gdb/gdbserver/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
include/gdb/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
* gdb/signals.def: Replace TARGET_SIGNAL_ with GDB_SIGNAL_
throughout.
sim/arm/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/avr/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/common/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/cr16/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/d10v/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/erc32/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/m32c/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/ppc/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/rl78/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/rx/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
2012-05-24 16:51:47 +00:00
Pedro Alves
dab06dbee5
2012-05-22 Pedro Alves <palves@redhat.com>
...
* target.h (store_waitstatus): Move declaration ...
* inf-child.h (store_waitstatus): ... here.
* target.c: Move inclusion of gdb_wait.h, and ...
(store_waitstatus): ... this ...
* inf-child.c: ... here.
* linux-nat.c: Include inf-child.h.
* rs6000-nat.c: Include inf-child.h.
* spu-linux-nat.c: Include inf-child.h.
2012-05-22 15:04:57 +00:00
Joel Brobecker
e1aca11ede
Add missing prototypes for build in ppx-aix.
...
gdb/ChangeLog:
2012-03-12 Chris January <chris.january@allinea.com>
* aix-thread.c (_initialize_aix_thread): Add prototype.
* rs6000-nat.c (_initialize_rs6000_nat): Ditto.
* xcoffsolib.c (_initialize_xcoffsolib): Ditto.
2012-03-12 15:57:19 +00:00
Joel Brobecker
0b30217134
Copyright year update in most files of the GDB Project.
...
gdb/ChangeLog:
Copyright year update in most files of the GDB Project.
2012-01-04 08:17:56 +00:00
Jan Kratochvil
5be4dfca58
gdb/
...
* cli/cli-cmds.c (shell_escape): Use waitpid.
* rs6000-nat.c (exec_one_dummy_insn): Likewise.
gdb/testsuite/
* gdb.base/async-shell.c: New file.
* gdb.base/async-shell.exp: New file.
2011-06-07 17:26:47 +00:00
Michael Snyder
9b20d036b6
2011-01-11 Michael Snyder <msnyder@vmware.com>
...
* arm-tdep.c: Internationalization.
* c-lang.c: Ditto.
* charset.c: Ditto.
* fork-child.c: Ditto.
* nto-procfs.c: Ditto.
* ppc-sysv-tdep.c: Ditto.
* procfs.c: Ditto.
* remote-mips.c: Ditto.
* remote.c: Ditto.
* rs6000-nat.c: Ditto.
* rs6000-tdep.c: Ditto.
* target.c: Ditto.
* valops.c: Ditto.
* value.c: Ditto.
* xml-support.c: Ditto.
* mi/mi-cmd-break.c: Ditto.
* mi/mi-cmd-var.c: Ditto.
* mi/mi-interp.c: Ditto.
* mi/mi-main.c: Ditto.
2011-01-11 15:10:03 +00:00
Michael Snyder
0df8b4180a
2011-01-10 Michael Snyder <msnyder@vmware.com>
...
* nto-procfs.c: Comment cleanup, mostly periods and spaces.
* nto-tdep.c: Ditto.
* nto-tdep.h: Ditto.
* objc-exp.y: Ditto.
* objc-lang.c: Ditto.
* objfiles.c: Ditto.
* objfiles.h: Ditto.
* observer.c: Ditto.
* opencl-lang.c: Ditto.
* osabi.c: Ditto.
* parse.c: Ditto.
* parser-defs.h: Ditto.
* p-exp.y: Ditto.
* p-lang.c: Ditto.
* posix-hdep.c: Ditto.
* ppcbug-rom.c: Ditto.
* ppc-linux-nat.c: Ditto.
* ppc-linux-tdep.c: Ditto.
* ppc-linux-tdep.h: Ditto.
* ppcnbsd-tdep.c: Ditto.
* ppcobsd-tdep.c: Ditto.
* ppcobsd-tdep.h: Ditto.
* ppc-sysv-tdep.c: Ditto.
* ppc-tdep.h: Ditto.
* printcmd.c: Ditto.
* proc-abi.c: Ditto.
* proc-flags.c: Ditto.
* procfs.c: Ditto.
* proc-utils.h: Ditto.
* progspace.h: Ditto.
* prologue-value.c: Ditto.
* prologue-value.h: Ditto.
* psympriv.h: Ditto.
* psymtab.c: Ditto.
* p-typeprint.c: Ditto.
* p-valprint.c: Ditto.
* ravenscar-sparc-thread.c: Ditto.
* ravenscar-thread.c: Ditto.
* ravenscar-thread.h: Ditto.
* record.c: Ditto.
* regcache.c: Ditto.
* regcache.h: Ditto.
* remote.c: Ditto.
* remote-fileio.c: Ditto.
* remote-fileio.h: Ditto.
* remote.h: Ditto.
* remote-m32r-sdi.c: Ditto.
* remote-mips.c: Ditto.
* remote-sim.c: Ditto.
* rs6000-aix-tdep.c: Ditto.
* rs6000-nat.c: Ditto.
* rs6000-tdep.c: Ditto.
2011-01-10 20:38:51 +00:00
Joel Brobecker
7b6bb8daac
run copyright.sh for 2011.
2011-01-01 15:34:07 +00:00
Pierre Muller
2244ba2e4a
Remove remaining "%ll" uses.
...
* go32-nat.c (go32_pte_for_address): Replace "0x%llx" using
hex_string call.
* rs6000-nat.c (rs6000_ptrace64): Idem.
* solib-pa64.c (pa64_current_sos): Idem.
* solib-spu.c (spu_current_sos): Idem.
* linux-nat.c (linux_nat_find_memory_regions): Replace "%lld" using
plongest call.
* nto-procfs.c (procfs_meminfo): Replace "0x%016llx" using
phex (VAR, 8) call.
* sh64-tdep.c (sh64_show_media_regs): Idem.
2010-04-05 22:18:53 +00:00
Joel Brobecker
4c38e0a4fc
Update copyright year in most headers.
...
Automatic update by copyright.sh.
2010-01-01 07:32:07 +00:00
Pierre Muller
47607d6f7c
* rs6000-nat.c (exec_one_dummy_insn): Add missing new ASPACE parameter
...
to depreacted_insert_raw_breakpoint function call.
* procfs.c (insert_dbx_link_bpt_in_file): Likewise.
2009-10-21 08:27:25 +00:00
Jan Kratochvil
adb7f3388f
gdb/
...
* objfiles.c (free_objfile): Clear SYMFILE_OBJFILE if it is OBJFILE.
* rs6000-nat.c (vmap_ldinfo): Only assertion check SYMFILE_OBJFILE now.
* symfile.c (syms_from_objfile, symbol_file_clear): Likewise.
2009-09-18 17:33:51 +00:00
Joel Brobecker
397dbc8b2b
Fix a build failure on AIX.
...
* rs6000-nat.c (vmap_exec): Rewrite using target_get_section_table
instead of relying on the to_sections/to_section_end target_ops
field, since the latter have been removed in a previous patch.
2009-09-09 17:59:18 +00:00
Ulrich Weigand
a6d9a66e23
* breakpoint.h (struct breakpoint): New member GDBARCH.
...
* breakpoint.c: Include "arch-utils.h".
(set_raw_breakpoint_without_location): Add GDBARCH parameter.
Use it to set breakpoint architecture.
(set_raw_breakpoint): Add GDBARCH parameter.
(create_internal_breakpoint): Likewise.
(create_catchpoint): Likewise.
(create_fork_vfork_event_catchpoint): Likewise.
(create_breakpoint): Likewise.
(create_breakpoints): Likewise.
(break_command_really): Likewise.
(create_ada_exception_breakpoint): Likewise.
Update local callers to pass architecture:
(create_internal_breakpoint): Update.
(create_overlay_event_breakpoint): Update.
(create_longjmp_master_breakpoint): Update.
(create_thread_event_breakpoint): Update.
(create_solib_event_breakpoint): Update.
(create_catchpoint): Update.
(create_fork_vfork_event_catchpoint): Update.
(set_momentary_breakpoint): Update.
(clone_momentary_breakpoint): Update.
(create_breakpoint): Update.
(create_breakpoints): Update.
(break_command_really): Update.
(break_command_1): Update.
(set_breakpoint): Update.
(watch_command_1): Update.
(catch_fork_command_1): Update.
(catch_exec_commnd_1): Update.
(handle_gnu_v3_exceptions): Update.
(create_ada_exception_breakpoint): Update.
(catch_ada_exception_command): Update.
(catch_assert_command): Update.
(trace_command): Update.
* breakpoint.h (struct bp_location): New member GDBARCH.
* breakpoint.c (get_sal_arch): New function.
(set_raw_breakpoint): Set location architecture.
(add_location_to_breakpoint): Likewise.
(clone_momentary_breakpoint): Likewise.
(watch_command_1): Likewise.
(update_watchpoint): Likewise.
(bp_loc_is_permanent): Use location architecture instead of
current_gdbarch.
(adjust_breakpoint_address): Add GDBARCH parameter; use it
instead of current_gdbarch.
Update callers of adjust_breakpoint_address to pass
breakpoint location architecture:
(set_raw_breakpoint): Update.
(watch_command_1): Update.
* tracepoint.c: (collect_symbol): Add GDBARCH parameter, use instead
of current_gdbarch.
(add_local_symbols): Add GDBARCH parameter. Pass to collect_symbol.
(encode_actions): Pass tracepoint architecture to add_local_symbols
(encode_actions): Use tracepoint architecture instead of
current_gdbarch. Pass it to add_local_symbols and collect_symbol.
* breakpoint.h (struct breakpoint_ops): Replace last_addr parameter
of print_one callback with last_loc.
* breakpoint.c (print_one_breakpoint_location): Replace last_addr
parameter with last_loc.
(print_one_breakpoint): Likewise.
(do_captured_breakpoint_query): Update call.
(breakpoint_1): Pass last_loc instead of last_addr to
print_one_breakpoint. Pass last location architecture instead of
current_gdbarch to set_next_address.
Update all implementations of the print_one callback:
* breakpoint.c (print_one_catch_fork): Update.
(print_one_catch_vfork): Update.
(print_one_catch_exec): Update.
(print_one_exception_catchpoint): Update.
* ada-lang.c (print_one_exception): Update.
(print_one_catch_exception): Update.
(print_one_catch_exception_unhandled): Update.
(print_one_catch_assert): Update.
* breakpoint.c (print_one_breakpoint_location): Add PRINT_ADDRESS_BITS
parameter. Use it instead of gdbarch_addr_bit (current_gdbarch).
(print_one_breakpoint): Add PRINT_ADDRESS_BITS parameter and pass it
to print_one_breakpoint_location.
(breakpoint_address_bits): New function.
(do_captured_breakpoint_query): Compute number of address bits to print
and pass it to print_one_breakpoint.
(breakpoint_1): Likewise. Use it instead of current_gdbarch.
* breakpoint.h (create_thread_event_breakpoint): Add GDBARCH.
* breakpoint.c (create_thread_event_breakpoint): Likewise.
Update callers to create_thread_event_breakpoint:
* aix-thread.c (pd_enable): Update.
* linux-thread-db.c (enable_thread_event): Update.
* breakpoint.h (create_solib_event_breakpoint): Add GDBARCH.
* breakpoint.c (create_solib_event_breakpoint): Likewise.
Update callers to create_solib_event_breakpoint:
* solib-frv.c (enable_break, enable_break2): Update.
* solib-pa64.c (pa64_solib_create_inferior_hook): Update.
* solib-som.c (som_solib_create_inferior_hook): Update.
* solib-darwin.c (darwin_solib_create_inferior_hook): Update.
* solib-svr4.c (enable_break): Update.
* breakpoint.h (insert_single_step_breakpoint): Add GDBARCH.
* breakpoint.c (insert_single_step_breakpoint): Likewise.
Update callers to insert_single_step_breakpoint:
* alpha-tdep.c (alpha_software_single_step): Update.
* arm-linux-tdep.c (arm_linux_software_single_step): Update.
* arm-tdep.c (arm_software_single_step): Update.
* cris-tdep.c (cris_software_single_step): Update.
* rs6000-aix-tdep.c (rs6000_software_single_step): Update.
* rs6000-tdep.c (ppc_deal_with_atomic_sequence): Update.
* sparc-tdep.c (sparc_software_single_step): Update.
* spu-tdep.c (spu_software_single_step): Update.
* mips-tdep.c (deal_with_atomic_sequence): Add GDBARCH parameter.
Pass it to insert_single_step_breakpoint.
(mips_software_single_step): Pass architecture to
deal_with_atomic_sequence and insert_single_step_breakpoint.
* breakpoint.h (deprecated_insert_raw_breakpoint): Add GDBARCH.
(deprecated_remove_raw_breakpoint): Likewise.
* breakpoint.c (deprecated_insert_raw_breakpoint): Add GDBARCH.
(deprecated_remove_raw_breakpoint): Likewise.
Update callers to deprecated_insert_raw_breakpoint and
deprecated_remove_raw_breakpoint:
* breakpoint.c (single_step_gdbarch): New static variable.
(insert_single_step_breakpoint): Pass GDBARCH parameter to
deprecated_insert_raw_breakpoint. Store it in single_step_gdbarch.
(remove_single_step_breakpoints): Pass architecture stored in
single_step_gdbarch to deprecated_remove_raw_breakpoint.
* rs6000-nat.c (exec_one_dummy_insn): Update.
* solib-irix.c (enable_break, disable_break): Update.
* procfs.c (procfs_mourn_inferior): Update.
(remove_dbx_link_breakpoint): Update.
* breakpoint.h (set_breakpoint): Add GDBARCH parameter.
(set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise.
* breakpoint.c (set_breakpoint): Add GDBARCH parameter.
(set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise.
Update callers to set_breakpoint, set_momentary_breakpoint and
set_momentary_breakpoint_at_pc:
* breakpoint.c (set_momentary_breakpoint_at_pc): Update.
(until_break_command): Update.
* infcall.c (call_function_by_hand): Update.
* infcmd.c (finish_backward, finish_forward): Update.
* infrun.c (insert_step_resume_breakpoint_at_sal): Add GDBARCH
parameter. Pass it to set_momentary_breakpoint.
(insert_longjmp_resume_breakpoint): Add GDBARCH parameter.
Pass it to set_momentary_breakpoint_at_pc.
(handle_inferior_event): Update.
(insert_step_resume_breakpoint_at_frame): Update.
(insert_step_resume_breakpoint_at_caller): Update..
* mi/mi-cmd-break.c: Include "arch-utils.h".
(mi_cmd_break_insert): Update.
* target.h (struct target_ops): Add GDBARCH parameter to
to_insert_breakpoint, to_remove_breakpoint, to_insert_hw_breakpoint,
and to_remove_hw_breakpoint members.
(target_insert_breakpoint, target_remove_breakpoint,
target_insert_hw_breakpoint, target_remove_hw_breakpoint): Add GDBARCH
parameter, pass to target routine.
(memory_remove_breakpoint, memory_insert_breakpoint): Add GDBARCH
parameter.
* target.c (debug_to_insert_breakpoint, debug_to_remove_breakpoint,
debug_to_insert_hw_breakpoint, debug_to_remove_hw_breakpoint): Add
GDBARCH parameter, pass to target routine.
(update_current_target): Update function signature.
* breakpoint.c (insert_bp_location, remove_breakpoint,
deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint):
Pass architecture to target_ routines.
Update all implementations of the target breakpoint routines to take
GDBARCH parameter and use it instead of GDBARCH as appropriate:
* corelow.c (ignore): Update.
* exec.c (ignore): Update.
* mem-break.c (memory_insert_breakpoint): Update.
(memory_remove_breakpoint): Update.
* monitor.c (monitor_insert_breakpoint): Update.
(monitor_remove_breakpoint): Update.
* record.c (record_insert_breakpoint): Update.
(record_beneath_to_insert_breakpoint): Update.
(record_remove_breakpoint): Update.
(record_beneath_to_remove_breakpoint): Update.
* remote.c (remote_insert_breakpoint): Update.
(remote_remove_breakpoint): Update.
(remote_insert_hw_breakpoint): Update.
(remote_remove_hw_breakpoint): Update.
* remote-m32r-sdi.c (m32r_insert_breakpoint): Update.
(m32r_remove_breakpoint): Update.
* remote-mips.c (mips_insert_breakpoint): Update.
(mips_remove_breakpoint): Update.
* i386-nat.c (i386_insert_hw_breakpoint): Update.
(i386_remove_hw_breakpoint): Update.
* nto-procfs.c (procfs_insert_breakpoint): Update.
(procfs_remove_breakpoint): Update.
(procfs_insert_hw_breakpoint): Update.
(procfs_remove_hw_breakpoint): Update.
doc/ChangeLog:
* gdbint.texi (Examples of Use of @code{ui_out} functions):
Update example code extrated from breakpoint.c.
2009-07-02 17:12:28 +00:00
Ulrich Weigand
a97b0ac8cf
* ada-tasks.c (read_known_tasks_array): Use target_gdbarch instead
...
of current_gdbarch.
* aix-thread.c (pd_enable): Likewise.
* amd64-linux-nat.c (ps_get_thread_area): Likewise.
* bsd-uthread.c (bsd_uthread_activate): Likewise.
* linux-nat.c (linux_nat_info_proc_cmd): Likewise.
* linux-thread-db.c (enable_thread_event): Likewise.
* monitor.c (monitor_write_memory, monitor_read_memory): Likewise.
* nto-procfs.c (procfs_open): Likewise.
* procfs.c (invalidate_cache, procfs_insert_watchpoint,
info_proc_mappings, info_mappings_callback): Likewise.
* record.c (record_open): Likewise.
* rs6000-nat.c (ARCH64): Likewise.
* solib-darwin.c (darwin_solib_create_inferior_hook): Likewise.
(darwin_bfd_open): Likewise.
* memattr.c (mem_info_command): Likewise.
* windows-nat.c (win32_resume): Use current regcache architecture
instead of current_gdbarch.
* dbug-rom.c (dbug_regname): Remove check against number of
registers in current_gdbarch.
* solib-pa64.c (read_dynamic_info): Remove unused variable.
2009-06-17 18:44:23 +00:00
Paul Pluzhnikov
7eedccfa2a
2009-06-16 Paul Pluzhnikov <ppluzhnikov@google.com>
...
* solib.c (symbol_add_stub): New FLAGS parameter.
(solib_read_symbols): FROM_TTY -> FLAGS, call symbol_add_stub
directly.
(solib_add): Defer breakpoint_re_set until after all solibs.
* bsd-uthread.c (bsd_uthread_solib_loaded): Adjust.
* rs6000-nat.c (objfile_symbol_add): Adjust.
* symfile.c (syms_from_objfile): Merge parameters into ADD_FLAGS.
(new_symfile_objfile): Likewise.
(symbol_file_add_with_addrs_or_offsets): Likewise.
(symbol_file_add_from_bfd): Likewise.
(symbol_file_add): Likewise.
* symfile.h (enum symfile_add_flags): New. Adjust prototypes.
* symfile-mem.c (symbol_file_add_from_memory): Adjust.
* windows-nat.c (safe_symbol_file_add_stub): Adjust.
* machoread.c (macho_oso_symfile, macho_symfile_read): Adjust.
2009-06-16 18:49:25 +00:00
Pedro Alves
07b82ea5f9
* target.c: Include "exec.h".
...
(update_current_target): Don't inherit to_sections or
to_sections_end.
(target_get_section_table): New.
(target_section_by_addr): Fetch the section table from the passed
in target.
(memory_xfer_partial): Handle unmapped overlay sections before
anything else. Get the overlay mapped address here. Adjust to
use section_table_xfer_memory_partial.
(get_target_memory): Request a TARGET_OBJECT_RAW_MEMORY object
instead of TARGET_OBJECT_MEMORY.
(target_resize_to_sections): Delete.
(remove_target_sections): Adjust to remove target sections from
`current_target_sections', and use resize_section_table.
* target.h (struct target_ops) <to_sections, to_sections_end>:
Remove fields.
<to_get_section_table>: New method.
(xfer_memory, print_section_info): Delete declarations.
(struct target_section_table): New type.
(target_get_section_table): Declare.
(target_resize_to_sections): Delete declaration.
(remove_target_sections): Delete declaration.
* bfd-target.c (target_bfd_xfer_partial): Get the section table
from to_data.
(target_bfd_get_section_table): New.
(target_bfd_xclose): Adjust.
(target_bfd_reopen): Store the section table in the to_data field.
* corelow.c (core_data): New.
(core_close): Adjust to release core_data and its sections.
(core_open): Allocate core_data, and build its target sections
table.
(deprecated_core_resize_section_table): New.
(core_files_info): Pass core_data to print_section_info.
(core_xfer_partial): Adjust to use
section_table_xfer_memory_partial for TARGET_OBJECT_MEMORY xfers.
(init_core_ops): Do not install a deprecated_xfer_memory callback
anymore.
* solib.c (update_solib_list): Add the shared library sections
to the current target sections table.
* exec.c (current_target_sections_1): New global.
(current_target_sections): New global.
(exec_close_1): New function, refactored from exec_close. Remove
the exec_bfd's sections from the current target sections table.
Adjust to not use to_sections.
(exec_close): Remove all target sections. Call exec_close_1.
(exec_file_clear): Use exec_close_1 instead of unpushing the
target.
(exec_file_attach): Likewise. Adjust to not use to_sections. Add
exec_bfd's sections to the current target sections table. Don't
push the exec_ops target here.
(resize_section_table): New.
(add_target_sections): New.
(remove_target_sections): Moved here.
(section_table_xfer_memory): Adjust to implement the xfer_partial
interface, and rename to...
(section_table_xfer_memory_partial): ... this, replacing the
current function of that same name.
(exec_get_section_table): New.
(exec_xfer_partial): New.
(xfer_memory): Delete.
(print_section_info): Replace the target_ops parameter by a
target_section_table parameter.
(exec_files_info, set_section_command, exec_set_section_address):
Adjust to use the current sections table.
(init_exec_ops): Do not register a deprecated_xfer_memory
callback. Register to_xfer_partial and to_get_section_table
callbacks.
* infrun.c (handle_inferior_event): Update comments around
solib_add.
* rs6000-nat.c (xcoff_relocate_core): Adjust to use
deprecated_core_resize_section_table.
* exec.h (resize_section_table): Declare.
(section_table_xfer_memory_partial): Add const char * argument.
(remove_target_sections): Declare here.
(add_target_sections): Declare.
(print_section_info): Declare here.
* gdbcore.h (deprecated_core_resize_section_table): Declare.
2009-06-03 18:50:36 +00:00
Jan Kratochvil
1b36a34b7a
gdb/
...
Replace the savestring calls by xstrdup calls where possible.
* breakpoint.c (condition_command, set_raw_breakpoint)
(create_catchpoint, update_breakpoint_locations): Replace the
savestring calls by xstrdup calls where possible.
* buildsym.c (start_subfile, patch_subfile_names, record_debugformat)
(record_producer): Likewise.
* coffread.c (coff_start_symtab, complete_symtab): Likewise.
* corefile.c (set_gnutarget): Likewise.
* dbxread.c (add_new_header_file): Likewise.
* demangle.c (set_demangling_command, set_demangling_style): Likewise.
* event-top.c (push_prompt, pop_prompt, command_line_handler)
(set_async_prompt): Likewise.
* infcmd.c (set_inferior_io_terminal, attach_command_post_wait):
Likewise.
* language.c (set_language_command, _initialize_language): Likewise.
* linespec.c (decode_line_2): Likewise.
* rs6000-nat.c (add_vmap): Likewise.
* top.c (set_prompt, init_history, init_main): Likewise.
* tracepoint.c (stringify_collection_list): Likewise.
* varobj.c (varobj_create): Remove variable expr_len. Replace the
savestring calls by xstrdup calls where possible.
(value_of_root, c_name_of_variable, c_describe_child): Replace the
savestring calls by xstrdup calls where possible.
* xcoffread.c (complete_symtab): Likewise.
* cli/cli-script.c (build_command_line, define_command): Likewise.
* cli/cli-setshow.c (do_setshow_command): Likewise.
2009-05-23 16:17:18 +00:00
Pedro Alves
0542c86dbb
* target.h (struct section_table): Rename to ...
...
(struct target_section): ... this.
* exec.c: Adjust all references.
* exec.h: Adjust all references.
* nto-tdep.c: Adjust all references.
* nto-tdep.h: Adjust all references.
* ppc-linux-tdep.c: Adjust all references.
* rs6000-nat.c: Adjust all references.
* s390-tdep.c: Adjust all references.
* solib-darwin.c: Adjust all references.
* solib-frv.c: Adjust all references.
* solib-irix.c: Adjust all references.
* solib-null.c: Adjust all references.
* solib-osf.c: Adjust all references.
* solib-pa64.c: Adjust all references.
* solib-som.c: Adjust all references.
* solib-sunos.c: Adjust all references.
* solib-svr4.c: Adjust all references.
* solib-target.c: Adjust all references.
* solib.c: Adjust all references.
* solist.h: Adjust all references.
* symfile.c: Adjust all references.
* symfile.h: Adjust all references.
* target.c: Adjust all references.
2009-05-22 23:49:14 +00:00
Pedro Alves
47608cb1ac
* target.h (TARGET_WNOHANG): New.
...
* target.c (target_wait): Add `options' argument. Adjust.
(struct target_ops) <to_wait>: Add `options' argument.
(target_wait): Add `options' argument.
* infrun.c (wait_for_inferior): Pass 0 as options to
target_wait (blocking wait).
(fetch_inferior_event): Pass TARGET_WNOHANG as options to
target_wait.
* fork-child.c (startup_inferior): Pass 0 as options to
target_wait (blocking wait).
* linux-nat.c (linux_nat_create_inferior): Remove async masking.
(linux_nat_wait_1): Add `target_options' argument. Use it instead
of checking on target_can_async_p.
(linux_nat_wait): Add `target_options' argument. Adjust.
* remote.c (remote_wait_ns): Add `options' argument. Adjust to
check on TARGET_WNOWAIT instead of checking on remote_is_async_p.
(remote_wait_as): Add `options' argument. Adjust to check on
TARGET_WNOWAIT instead of checking on remote_is_async_p. If doing
a blocking wait, keep waiting until an interesting event comes
out.
(remote_wait): Add `options' argument. Don't loop here if the
target is in async mode, and a blocking wait has been requested.
* top.c (deprecated_target_wait_hook): Add `options' argument.
* linux-thread-db.c (thread_db_wait): Add `options' argument, and
pass it down to the layer beneath.
* inf-ptrace.c (inf_ptrace_wait): Add `options' argument.
* record.c (record_beneath_to_wait): Add `options' argument.
(record_wait): Add `options' argument, and pass it down to the
layer beneath.
* bsd-uthread.c (bsd_uthread_wait): Add `options' argument.
* darwin-nat.c (darwin_wait): Likewise.
* defs.h (deprecated_target_wait_hook): Likewise.
* gnu-nat.c (gnu_wait): Add `options' argument.
* go32-nat.c (go32_wait): Likewise.
* hpux-thread.c (hpux_thread_wait): Add `options' argument, and
pass it down to the layer beneath.
* inf-ttrace.c (inf_ttrace_wait): Add `options' argument.
* monitor.c (monitor_wait): Likewise.
* nto-procfs.c (procfs_wait): Likewise.
* remote-mips.c (mips_wait): Add `options' argument.
* remote-sim.c (gdbsim_wait): Likewise.
* rs6000-nat.c (rs6000_wait): Add `options' argument.
* sol-thread.c (sol_thread_wait): Add `options' argument, and pass
it down to the layer beneath.
* spu-linux-nat.c (spu_child_wait): Add `options' argument.
* windows-nat.c (windows_wait): Likewise.
* tui/tui-hooks.c (tui_target_wait_hook): Likewise. Adjust.
2009-05-21 15:48:42 +00:00
Ulrich Weigand
fb14de7bbd
* inferior.h (read_pc, write_pc): Remove.
...
* regcache.c (read_pc, write_pc): Remove.
* infrun.c (displaced_step_fixup): Use regcache_read_pc instead
of read_pc.
(handle_inferior_event): Use regcache_read_pc instead of read_pc
when determining value of stop_pc. Replace subsequent uses of
read_pc by inspecting already-retrieved stop_pc value.
(keep_going): Use regcache_read_pc instead of read_pc.
* breakpoint.c (watchpoint_check): Use current frame architecture
and PC instead of current_gdbarch and read_pc ().
* tracepoint.c (set_traceframe_context): Replace PC argument
with FRAME argument.
(trace_start_command, finish_tfind_command): Update calls.
(finish_tfind_command): Compare frame IDs to identify transitions
between frames.
(trace_find_pc_command): Use regcache_read_pc instead of read_pc.
* rs6000-nat.c (exec_one_dummy_insn): Pass in regcache instead
of gdbarch. Use regcache_read_pc and regcache_write_pc instead
of read_pc and write_pc.
(store_register): Make regcache argument non-const. Update call
to exec_one_dummy_insn.
* thread.c (switch_to_thread): Use regcache_read_pc instead of read_pc.
* infcmd.c (post_create_inferior): Likewise.
* solib-darwin.c (darwin_solib_create_inferior_hook): Likewise.
* solib-pa64.c (pa64_solib_create_inferior_hook): Likewise.
* solib-sunos.c (sunos_solib_create_inferior_hook): Likewise.
* solib-svr4.c (enable_break, svr4_relocate_main_executable): Likewise.
* linux-fork.c (fork_load_infrun_state): Likewise.
* hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Likewise.
* record.c (record_wait): Likewise.
* procfs.c (procfs_wait): Likewise.
* remote-mips.c (common_open, mips_wait): Likewise.
* remote-m32r-sdi.c (m32r_resume): Likewise.
* symfile.c (generic_load): Use regcache_write_pc instead of write_pc.
* monitor.c (monitor_create_inferior, monitor_load): Likewise.
* m32r-rom.c (m32r_load, m32r_upload_command): Likewise.
* remote-m32r-sdi.c (m32r_create_inferior, m32r_load): Likewise.
* remote-mips.c (mips_create_inferior, mips_load): Likewise.
* solib-darwin.c: Include "regcache.h".
* solib-pa64.c: Include "regcache.h".
* solib-svr4.c: Include "regcache.h.".
* symfile.c: Do not mention read_pc or write_pc in comments.
* dink32-rom.c: Likewise.
* m32r-rom.c: Likewise.
* mips-tdep.c: Likewise.
2009-05-05 13:24:49 +00:00
Joel Brobecker
1ba0a4eebc
Fix an error happening while loading symbols from a core file
...
(on AIX).
* rs6000-nat.c (xcoff_relocate_symtab): Use target_has_execution
to detect whether we're debugging a core file or not.
2009-03-15 20:26:11 +00:00
Pedro Alves
28439f5ef7
* corelow.c (get_core_registers): Adjust.
...
(core_file_thread_alive): Rename to...
(core_thread_alive): ... this.
(core_pid_to_str): Try gdbarch_core_pid_to_str first.
(init_core_ops): Adjust.
(coreops_suppress_target): Delete.
(_initialize_corelow): Unconditionally add core_ops.
* procfs.c: Include "inf-child.h".
(procfs_ops): Delete.
(init_procfs_ops): Delete. Reimplement as...
(procfs_target): ... this, inheriting from inf-child.
(procfs_attach, procfs_detach, procfs_fetch_registers): Adjust.
(procfs_prepare_to_store): Delete.
(procfs_store_registers, procfs_resume): Adjust.
(procfs_open): Delete.
(procfs_suppress_run): Delete.
(procfs_can_run): Delete.
(procfs_mourn_inferior): Adjust.
(procfs_init_inferior): Add target_ops parameter. Adjust.
(procfs_create_inferior): Don't pass procfs_init_inferior to
fork_inferior. Instead call it after fork_inferior returns.
(procfs_find_new_threads): Adjust.
(_initialize_procfs): Adjust to use procfs_target instead of
init_procfs_ops.
* sol-thread.c (orig_core_ops, sol_core_ops): Delete.
(lwp_to_thread): Use target_thread_alive.
(sol_thread_open): Delete.
(sol_thread_attach): Delete.
(sol_thread_detach, sol_thread_resume, sol_thread_wait)
(sol_thread_fetch_registers, sol_thread_store_registers): Adjust
to use find_target_beneath.
(sol_thread_prepare_to_store, sol_thread_xfer_memory): Delete.
(sol_thread_xfer_partial): Adjust to use find_target_beneath.
(sol_thread_files_info, sol_thread_kill_inferior): Delete.
(check_for_thread_db): New.
(sol_thread_notice_signals, sol_thread_create_inferior): Delete.
(sol_thread_new_objfile): Call check_for_thread_db.
(sol_thread_mourn_inferior): Adjust to use find_target_beneath.
(sol_thread_can_run): Delete.
(sol_thread_alive): Adjust to use find_target_beneath.
(sol_thread_stop): Delete.
(rw_common): Use target_write_memory or target_read_memory.
(ps_lgetregs, ps_lgetfpregs): Use target_fetch_registers.
(ps_lsetregs, ps_lsetfpregs): Use target_store_registers.
(solaris_pid_to_str): Remove check for libthread_db initialization
failing.
(sol_find_new_threads): Remove check for libthread_db
initialization failing, or for an invalid inferior_ptid. Adjust
to use find_target_beneath.
(sol_core_open, sol_core_close, sol_core_detach,
sol_core_files_info, sol_find_memory_regions,
sol_make_note_section, ignore): Delete.
(init_sol_thread_ops): Make it a thread_stratum target. Remove
unneeded callback settings.
(init_sol_core_ops): Delete.
(_initialize_sol_thread): No longer call init_sol_core_ops, set
procfs_suppress_run, or hack with core_ops.
* target.h (struct target_ops): Add a target_ops * parameter to
to_resume, to_fetch_registers, to_store_registers, to_thread_alive
and to_find_new_threads.
(target_fetch_registers, target_store_registers)
(target_thread_alive, target_find_new_threads): Redeclare as
function.
* target.c (update_current_target): Do not inherit or de_fault
to_resume, to_fetch_registers, to_store_registers,
to_thread_alive, to_find_new_threads.
(target_resume): Adjust.
(target_thread_alive, target_find_new_threads): New.
(debug_to_resume, debug_to_fetch_registers): Delete.
(target_fetch_registers): New.
(debug_to_store_registers): Delete.
(target_store_registers): New.
(debug_to_thread_alive, debug_to_find_new_threads): Delete.
(setup_target_debug): Adjust.
* gdbcore.h (core_ops): Delete declaration.
* inf-ptrace.c, linux-nat.c, remote.c, amd64-linux-nat.c,
inf-child.c, linux-thread-db.c, bsd-uthread.c, inf-ttrace.c,
i386-sol2-tdep.c, darwin-nat.c, gnu-nat.c, go32-nat.c,
hpux-thread.c, i386-linux-nat.c, i386fbsd-nat.c, monitor.c,
nto-procfs.c, remote-m32r-sdi.c, remote-mips.c, windows-nat.c,
alphabsd-nat.c, amd64bsd-nat.c, arm-linux-nat.c, armnbsd-nat.c,
bsd-kvm.c, hppa-hpux-nat.c, hppa-linux-nat.c, hppabsd-nat.c,
hppanbsd-nat.c, i386-darwin-nat.c, i386bsd-nat.c,
ia64-linux-nat.c, m32r-linux-nat.c, m68kbsd-nat.c,
m68klinux-nat.c, m88kbsd-nat.c, mips-linux-nat.c,
mips64obsd-nat.c, mipsnbsd-nat.c, ppc-linux-nat.c, ppcnbsd-nat.c,
ppcobsd-nat.c, remote-sim.c, rs6000-nat.c, s390-nat.c,
shnbsd-nat.c, sparc-nat.c, sparc-nat.h, spu-linux-nat.c,
vaxbsd-nat.c, xtensa-linux-nat.c: Adjust to target_ops changes.
* gdbarch.sh (core_pid_to_str): New gdbarch callback.
* gdbarch.h, gdbarch.c: Regenerate.
* sol2-tdep.c: Include "inferior.h".
(sol2_core_pid_to_str): New.
* sol2-tdep.h (sol2_core_pid_to_str): Declare.
* amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
* sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
* sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
* i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
2009-02-23 00:03:50 +00:00
Pedro Alves
63807e1d0d
Silence a few -Wmissing-prototypes warnings.
...
PR build/9877:
* alpha-linux-tdep.c (alpha_linux_regset_from_core_section): Make
it static.
* alpha-osf1-tdep.c (_initialize_alpha_osf1_tdep): Declare.
* amd64fbsd-tdep.c (amd64fbsd_init_abi): Make it static.
* amd64nbsd-tdep.c (_initialize_amd64nbsd_ndep): Rename to ...
(_initialize_amd64nbsd_tdep): ... this.
* arm-linux-tdep.c (arm_linux_software_single_step): Make it static.
(_initialize_arm_linux_tdep): Declare.
* armbsd-tdep.c (armbsd_fpreg_offset): Make it static.
* armnbsd-tdep.c (_initialize_arm_netbsd_tdep): Declare.
* armobsd-tdep.c (_initialize_armobsd_tdep): Declare.
* avr-tdep.c (avr_return_value): Make it static.
(avr_frame_unwind_cache): Ditto.
* bsd-uthread.c (bsd_uthread_inferior_created): Ditto.
(bsd_uthread_solib_loaded): Ditto.
(bsd_uthread_solib_unloaded): Ditto.
(bsd_uthread_target): Ditto.
(_initialize_bsd_uthread): Declare.
* cris-tdep.c (crisv32_single_step_through_delay): Make it static.
(cris_frame_unwind_cache): Ditto.
* frv-tdep.c (frv_return_value): Ditto.
* h8300-tdep.c (h8300_use_struct_convention): Ditto.
(h8300h_use_struct_convention): Ditto.
* hppa-tdep.c (hppa_sign_extend, hppa_low_hppa_sign_extend):
Ditto.
* hppa-tdep.h (hppa_low_sign_extend, hppa_sign_extend): Delete
declarations.
* hppabsd-tdep.c: Include hppabsd-tdep.h.
(hppabsd_find_global_pointer): Make it static.
* hppabsd-tdep.h: New.
* hppanbsd-tdep.c: Include hppabsd-tdep.h.
(hppabsd_init_abi): Remove declaration.
(_initialize_hppabsd_tdep): Remove declaration.
(_initialize_hppanbsd_tdep): Declare.
* hppaobsd-tdep.c: Include hppabsd-tdep.h.
(hppabsd_init_abi): Delete declaration.
(hppaobsd_init_abi): Make it static.
* i386-nto-tdep.c (_initialize_i386nto_tdep): Declare.
* i386nbsd-tdep.c (_initialize_i386nbsd_tdep): Declare.
* ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Declare.
* ia64-tdep.c (ia64_register_reggroup_p): Make it static.
* iq2000-tdep.c (_initialize_iq2000_tdep): Declare.
* m32c-tdep.c (m32c_register_reggroup_p): Make it static.
(m32c_analyze_prologue, m32c_virtual_frame_pointer): Ditto.
(_initialize_m32c_tdep): Declare.
* m32r-rom.c (_initialize_m32r_rom): Declare.
* m32r-tdep.c (m32r_skip_prologue): Make it static.
(m32r_return_value): Ditto.
* m68hc11-tdep.c (m68hc11_frame_unwind_cache): Make it static.
(m68hc11_return_value): Ditto.
* m68klinux-tdep.c (_initialize_m68k_linux_tdep): Declare.
* m88k-tdep.c (m88k_frame_cache): Make it static.
* mep-tdep.c (mep_gdb_print_insn): Ditto.
(mep_return_value): Ditto.
(_initialize_mep_tdep): Declare.
* mips-irix-tdep.c (_initialize_mips_irix_tdep): Declare.
* mips-linux-tdep.c (supply_64bit_reg): Make it static.
(mips_linux_syscall_next_pc): Ditto.
(_initialize_mips_linux_tdep): Declare.
* mips-tdep.c (mips_single_step_through_delay): Make it static.
* mipsnbsd-tdep.c (_initialize_mipsnbsd_tdep): Declare.
* mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Declare.
* mn10300-tdep.c (_initialize_mn10300_tdep): Declare.
* mt-tdep.c (_initialize_mt_tdep): Declare.
* nbsd-tdep.c: Include nbsd-tdep.h.
* nto-tdep.c (find_load_phdr): Make it static.
(_initialize_nto_tdep): Declare.
* ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Make it
static.
(_initialize_ppc_linux_tdep): Declare.
* remote-m32r-sdi.c (m32r_can_use_hw_watchpoint)
(m32r_insert_watchpoint, m32r_remove_watchpoint)
(m32r_stopped_data_address, m32r_stopped_by_watchpoint): Make
static.
* rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Declare.
* rs6000-nat.c: Include xcoffread.h.
(find_toc_address): Don't extern declare get_toc_offset. Adjust
to call xcoff_get_to_offset.
* rs6000-tdep.c (ppc_vsx_support_p, ppc_displaced_step_fixup)
(rs6000_skip_main_prologue, rs6000_in_solib_return_trampoline)
(rs6000_skip_trampoline_code): Make static.
* s390-tdep.c (s390_regset_from_core_section): Ditto.
* sh-tdep.c (sh_register_reggroup_p): Ditto.
* shnbsd-tdep.c (shnbsd_regset_from_core_section): Ditto.
(_initialize_shnbsd_tdep): Declare.
* solib-frv.c (displacement_from_map): Make static.
(_initialize_frv_solib): Declare.
* solib-irix.c (fetch_lm_info): Make static.
(_initialize_irix_solib): Declare.
* solib-som.c: Include solib-som.h.
(som_solib_select): Line break.
* sparc-tdep.c (sparc_regset_from_core_section): Make static.
* sparcnbsd-tdep.c (_initialize_sparnbsd_tdep): Rename to ...
(_initialize_sparcnbsd_tdep): ... this.
* spu-tdep.c (spu_software_single_step): Make it static.
(_initialize_spu_tdep): Declare.
* vax-tdep.c (vax_frame_cache): Make it static.
* xcoffread.c: Include xcoffread.h.
(get_toc_offset): Rename to ...
(xcoff_get_toc_offset): ... this.
(_initialize_xcoffread): Declare.
* xcoffread.h: New.
* xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Declare.
* xtensa-tdep.c (xtensa_skip_prologue, xtensa_derive_tdep): Make
static.
(_initialize_xtensa_tdep): Declare.
2009-02-22 01:02:20 +00:00
Pedro Alves
117de6a924
* linux-nat.c (linux_nat_wait): Adjust.
...
(linux_nat_pid_to_str): Adjust. Remove call to thread_db_init.
* linux-nat.h (thread_db_init): Delete declaration.
* linux-thread-db.c (target_beneath): Delete.
(thread_db_init): Delete.
(thread_db_detach): Use find_target_beneath.
(thread_db_wait): Adjust interface. Use find_target_beneath.
(thread_db_mourn_inferior): Use find_target_beneath.
(thread_db_can_async_p, thread_db_is_async_p, thread_db_async)
(thread_db_async_mask): Delete.
(thread_db_pid_to_str): Adjust interface. Use
find_target_beneath.
(thread_db_get_thread_local_address): Adjust interface. Use
find_target_beneath.
(init_thread_db_ops): Delete references to delete functions.
* target.c (update_current_target): Don't inherit or default
to_wait. Don't inherit to_pid_to_str and
to_get_thread_local_address.
(target_translate_tls_address): Look for a pushed target that
implements to_get_thread_local_address, and use it instead of
checking for target_get_thread_local_address_p.
(target_wait, target_pid_to_str): Reimplement as functions.
(dummy_pid_to_str): New.
(init_dummy_target): Register it.
(debug_to_wait): Delete.
* target.h (struct target_ops): Make to_wait, to_pid_to_str and
to_get_thread_local_address accept a pointer to struct target_ops.
(target_wait): Delete macro, and declare as function.
(target_pid_to_str): Likewise.
(target_get_thread_local_address)
(target_get_thread_local_address_p): Delete.
(noprocess): Add NORETURN and ATTR_NORETURN tags.
* inf-ptrace.c (inf_ptrace_wait): Adjust.
(inf_ptrace_pid_to_str): New.
(inf_ptrace_target): Use inf_ptrace_pid_to_str.
* aix-thread.c (aix_thread_wait, aix_thread_pid_to_str): Adjust.
* bsd-kvm.c (bsd_kvm_pid_to_str): Adjust.
* bsd-uthread.c (bsd_uthread_wait, bsd_uthread_pid_to_str):
Adjust.
* corelow.c (core_pid_to_str): Adjust.
* darwin-nat.c (darwin_wait, darwin_pid_to_str): Adjust.
* dec-thread.c (dec_thread_wait, dec_thread_pid_to_str): Adjust.
* gnu-nat.c (gnu_wait, gnu_pid_to_str): Adjust.
* go32-nat.c (go32_wait, go32_pid_to_str): Adjust.
* hpux-thread.c (hpux_thread_wait): Adjust.
* inf-ttrace.c (inf_ttrace_wait, inf_ttrace_pid_to_str): Adjust.
* monitor.c (monitor_wait, monitor_pid_to_str): Adjust.
* nto-procfs.c (procfs_wait, procfs_pid_to_str): Adjust.
* procfs.c (procfs_pid_to_str): Adjust.
* remote-m32r-sdi.c (m32r_wait, m32r_pid_to_str): Adjust.
* remote-mips.c (mips_wait): Adjust.
* remote-sim.c (gdbsim_wait, gdbsim_pid_to_str): Adjust.
* remote.c (remote_wait, remote_pid_to_str)
(remote_get_thread_local_address): Adjust.
* rs6000-nat.c (rs6000_wait): Adjust.
* sol-thread.c (procfs_pid_to_str): Adjust declaration.
(sol_thread_wait, solaris_pid_to_str): Adjust.
* spu-linux-nat.c (spu_child_wait): Adjust.
* windows-nat.c (windows_wait, windows_pid_to_str): Adjust.
2009-02-06 22:21:26 +00:00
Joel Brobecker
0fb0cc7590
Updated copyright notices for most files.
2009-01-03 05:58:08 +00:00
Tristan Gingold
d26b535418
2008-12-16 Tristan Gingold <gingold@adacore.com>
...
* inflow.c: Remove old_sigio, handle_sigio, old_fcntl_flags,
set_sigio_trap, clear_sigio_trap definitions.
* inferior.h: Remove set_sigio_trap and clear_sigio_trap declarations.
* inf-ptrace.c (inf_ptrace_wait): Remove call to set_sigio_trap
and clear_sigio_trap.
* inf-ttrace.c (inf_ttrace_wait): Ditto.
* linux-nat.c (linux_nat_wait): Ditto.
* spu-linux-nat.c (spu_child_wait): Ditto.
* rs6000-nat.c (rs6000_wait): Ditto.
* target.c: Remove target_activity_function and target_activity_fd.
* target.h: Remove target_activity_function and target_activity_fd
declarations.
2008-12-16 11:15:58 +00:00