Add a struct to describe the branch trace configuration and use it for
enabling branch tracing.
The user will be able to set configuration fields for each tracing format
to be used for new threads.
The actual configuration that is active for a given thread will be shown
in the "info record" command.
At the moment, the configuration struct only contains a format field
that is set to the only available format.
The format is the only configuration option that can not be set via set
commands. It is given as argument to the "record btrace" command when
starting recording.
2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
* Makefile.in (XMLFILES): Add btrace-conf.dtd.
* x86-linux-nat.c (x86_linux_enable_btrace): Update parameters.
(x86_linux_btrace_conf): New.
(x86_linux_create_target): Initialize to_btrace_conf.
* nat/linux-btrace.c (linux_enable_btrace): Update parameters.
Check format. Split into this and ...
(linux_enable_bts): ... this.
(linux_btrace_conf): New.
(perf_event_skip_record): Renamed into ...
(perf_event_skip_bts_record): ... this. Updated users.
(linux_disable_btrace): Split into this and ...
(linux_disable_bts): ... this.
(linux_read_btrace): Check format.
* nat/linux-btrace.h (linux_enable_btrace): Update parameters.
(linux_btrace_conf): New.
(btrace_target_info)<ptid>: Moved.
(btrace_target_info)<conf>: New.
(btrace_target_info): Split into this and ...
(btrace_tinfo_bts): ... this. Updated users.
* btrace.c (btrace_enable): Update parameters.
(btrace_conf, parse_xml_btrace_conf_bts, parse_xml_btrace_conf)
(btrace_conf_children, btrace_conf_attributes)
(btrace_conf_elements): New.
* btrace.h (btrace_enable): Update parameters.
(btrace_conf, parse_xml_btrace_conf): New.
* common/btrace-common.h (btrace_config): New.
* feature/btrace-conf.dtd: New.
* record-btrace.c (record_btrace_conf): New.
(record_btrace_cmdlist): New.
(record_btrace_enable_warn, record_btrace_open): Pass
&record_btrace_conf.
(record_btrace_info): Print recording format.
(cmd_record_btrace_bts_start): New.
(cmd_record_btrace_start): Call cmd_record_btrace_bts_start.
(_initialize_record_btrace): Add "record btrace bts" subcommand.
Add "record bts" alias command.
* remote.c (remote_state)<btrace_config>: New.
(remote_btrace_reset, PACKET_qXfer_btrace_conf): New.
(remote_protocol_features): Add qXfer:btrace-conf:read.
(remote_open_1): Call remote_btrace_reset.
(remote_xfer_partial): Handle TARGET_OBJECT_BTRACE_CONF.
(btrace_target_info)<conf>: New.
(btrace_sync_conf, btrace_read_config): New.
(remote_enable_btrace): Update parameters. Call btrace_sync_conf and
btrace_read_conf.
(remote_btrace_conf): New.
(init_remote_ops): Initialize to_btrace_conf.
(_initialize_remote): Add qXfer:btrace-conf packet.
* target.c (target_enable_btrace): Update parameters.
(target_btrace_conf): New.
* target.h (target_enable_btrace): Update parameters.
(target_btrace_conf): New.
(target_object)<TARGET_OBJECT_BTRACE_CONF>: New.
(target_ops)<to_enable_btrace>: Update parameters and comment.
(target_ops)<to_btrace_conf>: New.
* target-delegates: Regenerate.
* target-debug.h (target_debug_print_const_struct_btrace_config_p)
(target_debug_print_const_struct_btrace_target_info_p): New.
NEWS: Announce new command and new packet.
doc/
* gdb.texinfo (Process Record and Replay): Describe the "record
btrace bts" command.
(General Query Packets): Describe qXfer:btrace-conf:read packet.
(Branch Trace Configuration Format): New.
gdbserver/
* linux-low.c (linux_low_enable_btrace): Update parameters.
(linux_low_btrace_conf): New.
(linux_target_ops)<to_btrace_conf>: Initialize.
* server.c (current_btrace_conf): New.
(handle_btrace_enable): Rename to ...
(handle_btrace_enable_bts): ... this. Pass ¤t_btrace_conf
to target_enable_btrace. Update comment. Update users.
(handle_qxfer_btrace_conf): New.
(qxfer_packets): Add btrace-conf entry.
(handle_query): Report qXfer:btrace-conf:read as supported packet.
* target.h (target_ops)<enable_btrace>: Update parameters and comment.
(target_ops)<read_btrace_conf>: New.
(target_enable_btrace): Update parameters.
(target_read_btrace_conf): New.
testsuite/
* gdb.btrace/delta.exp: Update "info record" output.
* gdb.btrace/enable.exp: Update "info record" output.
* gdb.btrace/finish.exp: Update "info record" output.
* gdb.btrace/instruction_history.exp: Update "info record" output.
* gdb.btrace/next.exp: Update "info record" output.
* gdb.btrace/nexti.exp: Update "info record" output.
* gdb.btrace/step.exp: Update "info record" output.
* gdb.btrace/stepi.exp: Update "info record" output.
* gdb.btrace/nohist.exp: Update "info record" output.
Fix a typo in the expedited registers for s390-te-linux64.
gdb/ChangeLog:
* features/Makefile (s390-te-linux64-expedite): Replace
non-existant r14 and r15 by r14l and r15l, respectively.
* regformats/s390-te-linux64.dat: Regenerate.
The Microblaze PC register is called "rpc", not "pc", as can be seen
in microblaze-core.xml. Fix this, so GDBserver can find the register in
the regcache.
gdb/
2014-10-15 Ajit Agarwal <ajitkum@xilinx.com>
* features/Makefile (microblaze-expedite): Replace pc with rpc.
* regformats/microblaze-with-stack-protect.dat: Regenerate.
This makes it easier to rebuild all GDB's generated target description
C files.
It also clarifies the comments a bit. One might think we need a GDB
configured for the particular arquitecture (--target=foo). But a
build that includes support for the target description is sufficient.
(GDB rejects target descriptions that explicitly specify the
architecture, with an <architecture> element, if the architecture is
unknown.)
Tested that "make clean-cfiles" deletes all .c files under
src/gdb/features/, and that "make cfiles" generates them all without
error, and that diffing the newly generated C files against master
comes out an empty diff.
gdb/
2014-10-01 Pedro Alves <palves@redhat.com>
* features/Makefile: Update comments.
(XMLTOC): List all xml files we build C files from.
(clean-cfiles): New rule.
I regenerated all the .c files under src/gdb/features/ and this is
what I got.
gdb/
2014-10-01 Pedro Alves <palves@redhat.com>
* features/i386/amd64-avx512-linux.c: Regenerate.
* features/i386/amd64-avx512.c: Regenerate.
* features/i386/x32-avx512-linux.c: Regenerate.
* features/i386/x32-avx512.c: Regenerate.
The only reason .dat files exist is for GBBserver to use them in its
build system.
A few .dat files are listed as targets for generation that shouldn't.
The target descriptions these files are built from aren't used by
GDBserver. They're fallback descriptions GDB itself has baked in.
Remove them from the list of .dat files to be generated, otherwise a
plain "make" under src/gdb/features/ generates new .dat files that
aren't even in the tree today.
gdb/
2014-10-01 Pedro Alves <palves@redhat.com>
* features/Makefile (WHICH): Remove arm-with-m,
arm-with-m-fpa-layout and arm-with-m-vfp-d16.
So that we can do "make clean all" to regenerate all the renerated
.dat files.
gdb/
2014-10-01 Pedro Alves <palves@redhat.com>
* features/Makefile (clean): New rule.
This file's format is invalid, as it's missing some end quotes.
I noticed this because I tried to regenerate all the .dat files in
gdb/regformats/. I got:
sh ../../move-if-change ../regformats/i386/x32-avx.tmp ../regformats/i386/x32-avx.dat
echo "# DO NOT EDIT: generated from i386/x32-avx512.xml" > ../regformats/i386/x32-avx512.tmp
echo "name:`echo x32-avx512 | sed 's/-/_/g'`" >> ../regformats/i386/x32-avx512.tmp
echo "xmltarget:x32-avx512.xml" >> ../regformats/i386/x32-avx512.tmp
echo "expedite:rbp,rsp,rip" \
>> ../regformats/i386/x32-avx512.tmp
xsltproc --path "/home/pedro/gdb/mygit/src/gdb/features" --xinclude number-regs.xsl i386/x32-avx512.xml | \
xsltproc sort-regs.xsl - | \
xsltproc gdbserver-regs.xsl - >> ../regformats/i386/x32-avx512.tmp
i386/64bit-avx512.xml:81: parser error : Unescaped '<' not allowed in attributes values
<reg name="zmm11h" bitsize="256" type="v2ui128/>
^
i386/64bit-avx512.xml:81: parser error : attributes construct error
<reg name="zmm11h" bitsize="256" type="v2ui128/>
^
i386/64bit-avx512.xml:81: parser error : Couldn't find end of Start Tag reg line 80
<reg name="zmm11h" bitsize="256" type="v2ui128/>
^
i386/64bit-avx512.xml:82: parser error : Unescaped '<' not allowed in attributes values
<reg name="zmm12h" bitsize="256" type="v2ui128/>
^
i386/64bit-avx512.xml:82: parser error : attributes construct error
<reg name="zmm12h" bitsize="256" type="v2ui128/>
^
...
i386/x32-avx512.xml:17: element include: XInclude error : could not load i386/64bit-avx512.xml, and no fallback was found
-:1: parser error : Document is empty
^
-:1: parser error : Start tag expected, '<' not found
^
unable to parse -
-:1: parser error : Document is empty
^
-:1: parser error : Start tag expected, '<' not found
^
unable to parse -
make: *** [../regformats/i386/x32-avx512.dat] Error 6
Interestingly, gdb/expat manages to grok the broken file.
gdb/
2014-10-01 Pedro Alves <palves@redhat.com>
* features/i386/64bit-avx512.xml (zmm10h, zmm11h, zmm12h, zmm13h)
(zmm14h): Add missing end quotes.
This reverts commit a4d9ba85 - 'AARCH64: Change cpsr type to be
64bit.'.
Even though Linux's ptrace exposes CPSR as 64-bit, CPSR is really
32-bit, and basing GDB's fundamentals on a particular OS's ptrace(2)
implementation is a bad idea.
In addition, while that commit intended to fix big endian Aarch64, it
ended up breaking floating point debugging against GDBserver, for both
big and little endian, because it changed the CPSR to be 64-bit in the
features/aarch64-core.xml file, but missed regenerating the
regformats/aarch64.dat file. If we generate it now, we see this:
diff --git c/gdb/regformats/aarch64.dat w/gdb/regformats/aarch64.dat
index afe1028..0d32183 100644
--- c/gdb/regformats/aarch64.dat
+++ w/gdb/regformats/aarch64.dat
@@ -35,7 +35,7 @@ expedite:x29,sp,pc
64:x30
64:sp
64:pc
-32:cpsr
+64:cpsr
128:v0
128:v1
128:v2
IOW, that commit left regformats/aarch64.dat still considering CPSR as
32-bits. regformats/aarch64.dat is used by GDBserver for its internal
regcache layout, and for the g/G packet register block. See the
generated aarch64.c file in GDBserver's build dir.
So the target description xml file that GDBserver reports to GDB is
now claiming that CPSR is 64-bit, but what GDBserver actually puts in
the g/G register packets is 32-bits. Because GDB thinks CPSR is
64-bit (because that's what the XML description says), GDB will be
reading the remaining 32-bit bits of CPSR out of v0 (the register
immediately afterwards), and then all the registers that follow CPSR
in the register packet end up wrong in GDB, because they're being read
from the wrong offsets...
gdb/
2014-10-01 Pedro Alves <palves@redhat.com>
* features/aarch64-core.xml (cpsr): Change back to 32-bit.
* features/aarch64.c: Regenerate.
Prior to version MicroBlaze v8.10.a,EDK 13.1, XMD's gdbserver stub returned 57
registers in response to GDB's G request. Starting with version MicroBlaze
v8.10.a, EDK 13.1, XMD added the slr and shr register, for a count of 59
registers. This patch adds these registers to the expected G response. This patch
fixes the above problem for baremetal and also supports the backward compatibility.
ChangeLog:
2014-07-02 Ajit Agarwal <ajitkum@xilinx.com>
* microblaze-tdep.c (microblaze_register_names): Add
the rshr and rslr register names.
(microblaze_gdbarch_init): Use of tdesc_has_registers.
Use of tdesc_find_feature. Use of tdesc_data_alloc.
Use of tdesc_numbered_register. Use of
microblaze_register_g_packet_guesses. Use of
tdesc_use_registers. Use of set_gdbarch_register_type.
(microblaze_register_g_packet_guesses): New.
* microblaze-tdep.h (microblaze_reg_num): Add
field MICROBLAZE_SLR_REGNUM MICROBLAZE_SHR_REGNUM
MICROBLAZE_NUM_REGS and MICROBLAZE_NUM_CORE_REGS.
(microblaze_frame_cache): Use of MICROBLAZE_NUM_REGS.
* features/microblaze-core.xml: New file.
* features/microblaze-stack-protect.xml: New file.
* features/microblaze-with-stack-protect.c: New file.
* features/microblaze-with-stack-protect.xml: New file.
* features/microblaze.xml: New file.
* features/microblaze.c: New file.
* features/Makefile (microblaze-with-stack-protect): Add
microblaze-with-stack-protect microblaze and
microblaze-expedite.
* regformats/microblaze-with-stack-protect.dat: New file.
* regformats/microblaze.dat: New file.
* doc/gdb.texinfo (MicroBlaze Features): New.
Signed-off-by:Ajit Agarwal ajitkum@xilinx.com
This patch adds support for the Intel(R) Advanced Vector
Extensions 512 (Intel(R) AVX-512) registers. Native and remote
debugging are covered by this patch.
Intel(R) AVX-512 is an extension to AVX to support 512-bit wide
SIMD registers in 64-bit mode (XMM0-XMM31, YMM0-YMM31, ZMM0-ZMM31).
The number of available registers in 32-bit mode is still 8
(XMM0-7, YMM0-7, ZMM0-7). The lower 256-bits of the ZMM registers
are aliased to the respective 256-bit YMM registers. The lower
128-bits are aliased to the respective 128-bit XMM registers.
There are also 8 new, dedicated mask registers (K0-K7) in both 32-bit
mode and 64-bit mode.
For more information please see
Intel(R) Developer Zone: Intel(R) AVX
http://software.intel.com/en-us/intel-isa-extensions#pid-16007-1495
Intel(R) Architecture Instruction Set Extensions Programming Reference:
http://software.intel.com/en-us/file/319433-017pdf
2014-04-24 Michael Sturm <michael.sturm@mintel.com>
Walfred Tedeschi <walfred.tedeschi@intel.com>
* amd64-linux-nat.c (amd64_linux_gregset32_reg_offset): Add
AVX512 registers.
(amd64_linux_read_description): Add code to handle AVX512 xstate
mask and return respective tdesc.
* amd64-linux-tdep.c: Include features/i386/amd64-avx512-linux.c
and features/i386/x32-avx512-linux.c.
(amd64_linux_gregset_reg_offset): Add AVX512 registers.
(amd64_linux_core_read_description): Add code to handle AVX512
xstate mask and return respective tdesc.
(_initialize_amd64_linux_tdep): Initialize AVX512 tdesc.
* amd64-linux-tdep.h (AMD64_LINUX_ORIG_RAX_REGNUM): Adjust regnum
calculation.
(AMD64_LINUX_NUM_REGS): Adjust to new number of registers.
(tdesc_amd64_avx512_linux): New prototype.
(tdesc_x32_avx512_linux): Likewise.
* amd64-tdep.c: Include features/i386/amd64-avx512.c and
features/i386/x32-avx512.c.
(amd64_ymm_avx512_names): New register names for pseudo
registers YMM16-31.
(amd64_ymmh_avx512_names): New register names for raw registers
YMMH16-31.
(amd64_k_names): New register names for K registers.
(amd64_zmmh_names): New register names for ZMM raw registers.
(amd64_zmm_names): New registers names for ZMM pseudo registers.
(amd64_xmm_avx512_names): New register names for XMM16-31
registers.
(amd64_pseudo_register_name): Add code to return AVX512 pseudo
registers.
(amd64_init_abi): Add code to intitialize AVX512 tdep variables
if feature is present.
(_initialize_amd64_tdep): Call AVX512 tdesc initializers.
* amd64-tdep.h (enum amd64_regnum): Add AVX512 registers.
(AMD64_NUM_REGS): Adjust to new number of registers.
* i386-linux-nat.c (GETXSTATEREGS_SUPPLIES): Extend range of
registers supplied via XSTATE by AVX512 registers.
(i386_linux_read_description): Add case for AVX512.
* i386-linux-tdep.c: Include i386-avx512-linux.c.
(i386_linux_gregset_reg_offset): Add AVX512 registers.
(i386_linux_core_read_description): Add case for AVX512.
(i386_linux_init_abi): Install supported register note section
for AVX512.
(_initialize_i386_linux_tdep): Add call to tdesc init function for
AVX512.
* i386-linux-tdep.h (I386_LINUX_NUM_REGS): Set number of
registers to be number of zmm7h + 1.
(tdesc_i386_avx512_linux): Add tdesc for AVX512 registers.
* i386-tdep.c: Include features/i386/i386-avx512.c.
(i386_zmm_names): Add ZMM pseudo register names array.
(i386_zmmh_names): Add ZMM raw register names array.
(i386_k_names): Add K raw register names array.
(num_lower_zmm_regs): Add constant for the number of lower ZMM
registers. AVX512 has 16 more ZMM registers than there are YMM
registers.
(i386_zmmh_regnum_p): Add function to look up register number of
ZMM raw registers.
(i386_zmm_regnum_p): Likewise for ZMM pseudo registers.
(i386_k_regnum_p): Likewise for K raw registers.
(i386_ymmh_avx512_regnum_p): Likewise for additional YMM raw
registers added by AVX512.
(i386_ymm_avx512_regnum_p): Likewise for additional YMM pseudo
registers added by AVX512.
(i386_xmm_avx512_regnum_p): Likewise for additional XMM registers
added by AVX512.
(i386_register_name): Add code to hide YMMH16-31 and ZMMH0-31.
(i386_pseudo_register_name): Add ZMM pseudo registers.
(i386_zmm_type): Construct and return vector registers type for ZMM
registers.
(i386_pseudo_register_type): Return appropriate type for YMM16-31,
ZMM0-31 pseudo registers and K registers.
(i386_pseudo_register_read_into_value): Add code to read K, ZMM
and YMM16-31 registers from register cache.
(i386_pseudo_register_write): Add code to write K, ZMM and
YMM16-31 registers.
(i386_register_reggroup_p): Add code to include/exclude AVX512
registers in/from respective register groups.
(i386_validate_tdesc_p): Handle AVX512 feature, add AVX512
registers if feature is present in xcr0.
(i386_gdbarch_init): Add code to initialize AVX512 feature
variables in tdep structure, wire in pseudo registers and call
initialize_tdesc_i386_avx512.
* i386-tdep.h (struct gdbarch_tdep): Add AVX512 related
variables.
(i386_regnum): Add AVX512 registers.
(I386_SSE_NUM_REGS): New define for number of SSE registers.
(I386_AVX_NUM_REGS): Likewise for AVX registers.
(I386_AVX512_NUM_REGS): Likewise for AVX512 registers.
(I386_MAX_REGISTER_SIZE): Change to 64 bytes, ZMM registers are
512 bits wide.
(i386_xmm_avx512_regnum_p): New prototype for register look up.
(i386_ymm_avx512_regnum_p): Likewise.
(i386_k_regnum_p): Likewise.
(i386_zmm_regnum_p): Likewise.
(i386_zmmh_regnum_p): Likewise.
* i387-tdep.c : Update year in copyright notice.
(xsave_ymm_avx512_offset): New table for YMM16-31 offsets in
XSAVE buffer.
(XSAVE_YMM_AVX512_ADDR): New macro.
(xsave_xmm_avx512_offset): New table for XMM16-31 offsets in
XSAVE buffer.
(XSAVE_XMM_AVX512_ADDR): New macro.
(xsave_avx512_k_offset): New table for K register offsets in
XSAVE buffer.
(XSAVE_AVX512_K_ADDR): New macro.
(xsave_avx512_zmm_h_offset): New table for ZMM register offsets
in XSAVE buffer.
(XSAVE_AVX512_ZMM_H_ADDR): New macro.
(i387_supply_xsave): Add code to supply AVX512 registers to XSAVE
buffer.
(i387_collect_xsave): Add code to collect AVX512 registers from
XSAVE buffer.
* i387-tdep.h (I387_NUM_XMM_AVX512_REGS): New define for number
of XMM16-31 registers.
(I387_NUM_K_REGS): New define for number of K registers.
(I387_K0_REGNUM): New define for K0 register number.
(I387_NUM_ZMMH_REGS): New define for number of ZMMH registers.
(I387_ZMM0H_REGNUM): New define for ZMM0H register number.
(I387_NUM_YMM_AVX512_REGS): New define for number of YMM16-31
registers.
(I387_YMM16H_REGNUM): New define for YMM16H register number.
(I387_XMM16_REGNUM): New define for XMM16 register number.
(I387_YMM0_REGNUM): New define for YMM0 register number.
(I387_KEND_REGNUM): New define for last K register number.
(I387_ZMMENDH_REGNUM): New define for last ZMMH register number.
(I387_YMMH_AVX512_END_REGNUM): New define for YMM31 register
number.
(I387_XMM_AVX512_END_REGNUM): New define for XMM31 register
number.
* common/i386-xstate.h: Add AVX 3.1 feature bits, mask and XSTATE
size.
* features/Makefile: Add AVX512 related files.
* features/i386/32bit-avx512.xml: New file.
* features/i386/64bit-avx512.xml: Likewise.
* features/i386/amd64-avx512-linux.c: Likewise.
* features/i386/amd64-avx512-linux.xml: Likewise.
* features/i386/amd64-avx512.c: Likewise.
* features/i386/amd64-avx512.xml: Likewise.
* features/i386/i386-avx512-linux.c: Likewise.
* features/i386/i386-avx512-linux.xml: Likewise.
* features/i386/i386-avx512.c: Likewise.
* features/i386/i386-avx512.xml: Likewise.
* features/i386/x32-avx512-linux.c: Likewise.
* features/i386/x32-avx512-linux.xml: Likewise.
* features/i386/x32-avx512.c: Likewise.
* features/i386/x32-avx512.xml: Likewise.
* regformats/i386/amd64-avx512-linux.dat: New file.
* regformats/i386/amd64-avx512.dat: Likewise.
* regformats/i386/i386-avx512-linux.dat: Likewise.
* regformats/i386/i386-avx512.dat: Likewise.
* regformats/i386/x32-avx512-linux.dat: Likewise.
* regformats/i386/x32-avx512.dat: Likewise.
* NEWS: Add note about new support for AVX512.
testsuite/
* Makefile.in (EXECUTABLES): Added i386-avx512.
* gdb.arch/i386-avx512.c: New file.
* gdb.arch/i386-avx512.exp: Likewise.
gdbserver/
* Makefile.in: Added rules to handle new files
i386-avx512.c i386-avx512-linux.c amd64-avx512.c
amd64-avx512-linux.c x32-avx512.c x32-avx512-linux.c.
* configure.srv (srv_i386_regobj): Add i386-avx512.o.
(srv_i386_linux_regobj): Add i386-avx512-linux.o.
(srv_amd64_regobj): Add amd64-avx512.o and x32-avx512.o.
(srv_amd64_linux_regobj): Add amd64-avx512-linux.o and
x32-avx512-linux.o.
(srv_i386_32bit_xmlfiles): Add i386/32bit-avx512.xml.
(srv_i386_64bit_xmlfiles): Add i386/64bit-avx512.xml.
(srv_amd64_xmlfiles): Add i386/amd64-avx512.xml and
i386/x32-avx512.xml.
(srv_i386_linux_xmlfiles): Add i386/i386-avx512-linux.xml.
(srv_amd64_linux_xmlfiles): Add i386/amd64-avx512-linux.xml and
i386/x32-avx512-linux.xml.
* i387-fp.c (num_avx512_k_registers): New constant for number
of K registers.
(num_avx512_zmmh_low_registers): New constant for number of
lower ZMM registers (0-15).
(num_avx512_zmmh_high_registers): New constant for number of
higher ZMM registers (16-31).
(num_avx512_ymmh_registers): New contant for number of higher
YMM registers (ymm16-31 added by avx521 on x86_64).
(num_avx512_xmm_registers): New constant for number of higher
XMM registers (xmm16-31 added by AVX512 on x86_64).
(struct i387_xsave): Add space for AVX512 registers.
(i387_cache_to_xsave): Change raw buffer size to 64 characters.
Add code to handle AVX512 registers.
(i387_xsave_to_cache): Add code to handle AVX512 registers.
* linux-x86-low.c (init_registers_amd64_avx512_linux): New
prototypei from generated file.
(tdesc_amd64_avx512_linux): Likewise.
(init_registers_x32_avx512_linux): Likewise.
(tdesc_x32_avx512_linux): Likewise.
(init_registers_i386_avx512_linux): Likewise.
(tdesc_i386_avx512_linux): Likewise.
(x86_64_regmap): Add AVX512 registers.
(x86_linux_read_description): Add code to handle AVX512 XSTATE
mask.
(initialize_low_arch): Add code to initialize AVX512 registers.
doc/
* gdb.texinfo (i386 Features): Add description of AVX512
registers.
Change-Id: Ifc4c08c76b85dbec18d02efdbe6182e851584438
Signed-off-by: Michael Sturm <michael.sturm@intel.com>
gdb/
* nios2-tdep.c (nios2_reg_names): Use "sstatus" rather than "ba"
as the preferred name of r30.
* nios2-linux-tdep.c (reg_offsets): Likewise.
* features/nios2-cpu.xml: Likewise.
* features/nios2-linux.c: Regenerated.
* features/nios2.c: Regenerated.
* regformats/nios2-linux.dat: Regenerated.
2013-06-26 Pedro Alves <pedro@codesourcery.com>
Yao Qi <yao@codesourcery.com>
* ctf.c (ctf_traceframe_info): Push trace state variables
present in the trace data into the traceframe info object.
* breakpoint.c (DEF_VEC_I): Remove.
* common/filestuff.c (DEF_VEC_I): Likewise.
* dwarf2loc.c (DEF_VEC_I): Likewise.
* mi/mi-main.c (DEF_VEC_I): Likewise.
* common/gdb_vecs.h (DEF_VEC_I): Define vector for int.
* features/traceframe-info.dtd: Add tvar element and its
attributes.
* tracepoint.c (free_traceframe_info): Free vector 'tvars'.
(build_traceframe_info): Push trace state variables present in the
trace data into the traceframe info object.
(traceframe_info_start_tvar): New function.
(tvar_attributes): New.
(traceframe_info_children): Add "tvar" element.
* tracepoint.h (struct traceframe_info) <tvars>: New field.
* NEWS: Mention the change in GDB and GDBserver.
gdb/doc:
2013-06-26 Pedro Alves <pedro@codesourcery.com>
* gdb.texinfo (Traceframe Info Format): Document tvar element and
its attributes.
gdb/gdbserver:
2013-06-26 Pedro Alves <pedro@codesourcery.com>
* tracepoint.c (build_traceframe_info_xml): Output trace state
variables present in the trace buffer.
The aarch64-without-fpu description is unused.
Linux requires an FPU, so the AArch64 native port always returns the
with-fpu variant:
static const struct target_desc *
aarch64_linux_read_description (struct target_ops *ops)
{
initialize_tdesc_aarch64 ();
return tdesc_aarch64;
}
When the target doesn't report a target description at all, we
fallback to a register set with an FPU:
aarch64_gdbarch_init ()
...
if (!tdesc_has_registers (tdesc))
tdesc = tdesc_aarch64;
This just removes the dead description.
Tested by building on x86_64 Fedora 17 with --enable=targets=all.
gdb/
2013-05-29 Pedro Alves <palves@redhat.com>
* aarch64-tdep.c: Don't include "features/aarch64-without-fpu.c".
(_initialize_aarch64_tdep): Don't call
initialize_tdesc_aarch64_without_fpu.
* features/Makefile (WHICH): Remove reference to
aarch64-without-fpu.
* features/aarch64-without-fpu.c: Delete file.
* regformats/aarch64-without-fpu.dat: Delete file.
This is more consistent with what we do with other similar XML lists,
and avoids a potential confusion with the library-list XML list.
gdb/ChangeLog:
* features/library-list-aix.dtd: Replace library-list by
library-list-aix.
* rs6000-nat.c: Replace library-list by library-list-aix
throughout.
* solib-aix.c: Likewise.
Andrew Jenner <andrew@codesourcery.com>
Chung-Lin Tang <cltang@codesourcery.com>
Julian Brown <julian@codesourcery.com>
Based on the nios2-elf port from Altera Corporation.
gdb/
* Makefile.in (ALL_TARGET_OBS): Add nios2-tdep.o and
nios2-linux-tdep.o.
(HFILES_NO_SRCDIR): Add nios2-tdep.h.
(ALLDEPFILES): Add nios2-tdep.c and nios2-linux-tdep.c.
* configure.tgt: Add nios2*-*-linux* and nios2*-*-* targets.
* nios2-tdep.h: New.
* nios2-tdep.c: New.
* nios2-linux-tdep.c: New.
* features/Makefile (WHICH): Add nios2-linux.
(nios2-linux-expedite): Set.
* features/nios2-cpu.xml: New.
* features/nios2.xml: New.
* features/nios2-linux.xml: New.
* features/nios2.c: New (autogenerated).
* features/nios2-linux.c: New (autogenerated).
* regformats/nios2-linux.dat: New (autogenerated).
* NEWS (Changes since GDB 7.6): Add new Nios II targets
and commands.
gdb/doc/
* gdb.texinfo (Nios II): New section.
(Nios II Features): New section.
Add a function to parse a btrace xml document into a vector of branch trace
blocks.
gdb/
* features/btrace.dtd: New file.
* Makefile.in (XMLFILES): Add btrace.dtd.
* btrace.h (parse_xml_btrace): New declaration.
* btrace.c: Include xml-support.h.
(parse_xml_btrace): New function.
(parse_xml_btrace_block): New function.
(block_attributes): New struct.
(btrace_attributes): New struct.
(btrace_children): New struct.
(btrace_elements): New struct.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
(arm_register_g_packet_guesses): New function.
(arm_gdbarch_init): Don't force a target description with
registers when the executable is detected as M-profile. Instead
set gdbarch->tdep->is_m. Register `g' packet guesses.
(_initialize_arm_tdep): Initialize the new target description.
* features/arm-with-m-fpa-layout.xml: New description.
* features/arm-with-m-fpa-layout.c: New, generated.
* s390-nat.c (SUBOFF): Remove.
(s390_native_supply, s390_native_collect): New functions.
(supply_gregset, supply_fpregset): Use s390_native_supply.
(fill_gregset, fill_fpregset): Use s390_native_collect.
* s390-tdep.c (s390_pseudo_register_reggroup_p): Update comment.
(s390_unwind_pseudo_register): New function.
(s390_prologue_frame_unwind_cache): Unwind PSW address and mask
registers instead of PC and CC.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_sigtramp_frame_unwind_cache): Do not unwind PC, CC, or
full GPR pseudos.
(s390_trad_frame_prev_register): New function.
(s390_frame_prev_register): Use it.
(s390_sigtramp_frame_prev_register): Likewise.
(s390_dwarf2_prev_register): Use s390_unwind_pseudo_register.
(s390_dwarf2_frame_init_reg): Unwind PSW address and mask. Use
special callback to unwind any pseudo.
* features/s390-core32.xml: Add pswm/pswa to save/restore group.
* features/s390-core64.xml: Likewise.
* features/s390x-core64.xml: Likewise.
* features/s390-linux32.c: Regenerate.
* features/s390-linux64.c: Likewise.
* features/s390x-linux64.c: Likewise.
gdbserver/ChangeLog:
* linux-s390-low.c (s390_collect_ptrace_register): Fully convert
PSW address/mask between 8-byte and 16-byte formats.
(s390_supply_ptrace_register): Likewise.
(s390_get_pc, s390_set_pc): 4-byte PSW address always includes
basic addressing mode bit.
I will need this description for the ppc-lynxos debugger where, AFAICT,
we only have access to the core GP and FP registers. So this adds
powerpc-32 to the list of targets for which a .dat file needs to be
generated.
2010-04-30 Joel Brobecker <brobecker@adacore.com>
* features/Makefile (WHICH): Add rs6000/powerpc-32.
(powerpc-32.o, powerpc-32.c): New rules.
(clean): Also remove powerpc-32.c.
* regformats/rs6000/powerpc-32.dat: Generate.
(arm_psr_thumb_bit): New. Update all uses of CPSR_T to
call this function.
(arm_pc_is_thumb): Add a gdbarch argument. Update all callers.
Check is_m after force-mode.
(arm_gdbarch_init): Check the binary before the target description.
Add check for M profile attribute. If we have an M-profile device,
but no target register description, use arm-with-m. Recognize the
new org.gnu.gdb.arm.m-profile feature and its xpsr register.
(_initialize_arm_tdep): Call initialize_tdesc_arm_with_m.
* arm-tdep.h (XPSR_T): Define.
(struct gdbarch_tdep): Add is_m member.
* features/arm-m-profile.xml, features/arm-with-m.c,
features/arm-with-m.xml: New files.
doc/
* gdb.texinfo (ARM Features): Document
org.gnu.gdb.arm.m-profile.
