This adds ada_value_print_array, a value-based analogue of
ada_val_print_array. It also removes some unused parameters from a
couple of helper functions.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* ada-valprint.c (val_print_packed_array_elements): Remove
bitoffset and val parameters. Call common_val_print.
(ada_val_print_string): Remove offset, address, and original_value
parameters.
(ada_val_print_array): Update.
(ada_value_print_array): New function.
(ada_value_print_1): Call it.
This converts ada_value_print to the value-based API by using
common_val_print rather than val_print.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* ada-valprint.c (ada_value_print): Use common_val_print.
This converts ada_val_print_ref to the value-based API by using
common_val_print rather than val_print.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* ada-valprint.c (ada_val_print_ref): Use common_val_print.
This adds ada_value_print_num, a value-based analogue of
ada_val_print_num.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* ada-valprint.c (ada_value_print_num): New function.
(ada_value_print_1): Use it.
This rewrites the TYPE_CODE_FLT case in ada_value_print_1 to be purely
value-based.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* ada-valprint.c (ada_value_print_1) <TYPE_CODE_FLT>: Rewrite.
This adds ada_value_print_ptr, a value-based analogue of
ada_val_print_ptr.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* ada-valprint.c (ada_value_print_ptr): New function.
(ada_value_print_1): Use it.
This rewrites ada_value_print_inner, introducing a new
ada_value_print_1, an analogue of ada_val_print_1. Because it was
simple to do, this also converts ada_val_print_gnat_array to be
valued-based and updates the uses.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* ada-valprint.c (ada_val_print_gnat_array): Take a struct value;
call common_val_print.
(ada_val_print_1): Update.
(ada_value_print_1): New function.
(ada_value_print_inner): Rewrite.
This adds cp_print_value, a value-based analogue of cp_print_val, and
changes cp_print_value_fields to use it.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* cp-valprint.c (cp_print_value_fields): Update.
(cp_print_value): New function.
This adds cp_print_value_fields and c_value_print_struct, value-based
analogues of the corresponding val-printing functions. Note that the
Modula-2 printing code also calls cp_print_val_fields, and so is
updated to call the function function.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* m2-valprint.c (m2_value_print_inner): Use
cp_print_value_fields.
* cp-valprint.c (cp_print_value_fields): New function.
* c-valprint.c (c_value_print_struct): New function.
(c_value_print_inner): Use c_value_print_struct.
* c-lang.h (cp_print_value_fields): Declare.
This adds c_value_print_array, a value-based analogue of
c_val_print_array.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* c-valprint.c (c_value_print_array): New function.
(c_value_print_inner): Use it.
This adds c_value_print_memberptr, a value-based analogue of
c_val_print_memberptr.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* c-valprint.c (c_value_print_memberptr): New function.
(c_value_print_inner): Use it.
This adds c_value_print_int, a value-based analogue of
c_val_print_int.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* c-valprint.c (c_value_print_int): New function.
(c_value_print_inner): Use it.
This adds c_value_print_ptr, a value-based analogue of
c_val_print_ptr.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* c-valprint.c (c_value_print_ptr): New function.
(c_value_print_inner): Use it.
This rewrites c_value_print_inner, copying in the body of
c_val_print_inner and adusting as needed. This will form the base of
future changes to fully convert this to using the value-based API
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* c-valprint.c (c_value_print_inner): Rewrite.
This adds generic_value_print_complex, a value-based analogue of
generic_val_print_complex.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* valprint.c (generic_value_print_complex): New function.
(generic_value_print): Use it.
This changes generic_val_print_float not to call
val_print_scalar_formatted. This lets generic_value_print then use
value_print_scalar_formatted instead.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* valprint.c (generic_val_print_float): Don't call
val_print_scalar_formatted.
(generic_val_print, generic_value_print): Update.
This adds generic_value_print_char, a value-based analogue of
generic_val_print_char.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* valprint.c (generic_value_print_char): New function
(generic_value_print): Use it.
This adds generic_value_print_int, a value-based analogue of
generic_val_print_int.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* valprint.c (generic_value_print_int): New function.
(generic_value_print): Use it.
This adds generic_value_print_bool, a value-based analogue of
generic_val_print_bool.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* valprint.c (generic_value_print_bool): New function.
(generic_value_print): Use it.
This removes the call to val_print_scalar_formatted from
generic_val_print_func, allowing generic_value_print to call the
value-based variant instead.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* valprint.c (generic_val_print_func): Simplify.
(generic_val_print, generic_value_print): Update.
This remove generic_val_print_flags in favor of using the value-based
API where possible.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* valprint.c (generic_val_print_flags): Remove.
(generic_val_print, generic_value_print): Update.
(val_print_type_code_flags): Add original_value parameter.
This removes a call to val_print_scalar_formatted from
generic_val_print_enum, preferring to do the work in the callers.
This lets generic_value_print use the value-based API.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* valprint.c (generic_val_print): Update.
(generic_value_print): Update.
* valprint.c (generic_val_print_enum): Don't call
val_print_scalar_formatted.
This introduces generic_value_print_ptr, a value-based analogue of
generic_val_print_ptr, and changes generic_value_print to use it.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* valprint.c (generic_value_print): Call generic_value_print_ptr.
* valprint.c (generic_value_print_ptr): New function.
This rewrites generic_value_print, by copying in the body of
generic_val_print and making the needed adjustments.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* valprint.c (generic_value_print): Rewrite.
This finishes the conversion of Pascal to the value-based API, by
introducing two more value-based analogues of existing val-print
functions.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* p-valprint.c (pascal_object_print_value_fields)
(pascal_object_print_value): New functions.
This rewrites pascal_value_print_inner, copying in the body of
pascal_val_print_inner and adusting as needed. This will form the
base of future changes to fully convert this to using the value-based
API.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* p-valprint.c (pascal_value_print_inner): Rewrite.
This finishes the conversion of the Fortran printing code to the
value-based API. The body of f_val_print is copied into
f_value_print_innner, and then modified as needed to use the value
API.
Note that not all calls must be updated. For example, f77_print_array
remains "val-like", because it does not result in any calls to
val_print (f77_print_array_1 calls common_val_print, which is
nominally value-based).
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* f-valprint.c (f_value_print_innner): Rewrite.
This finishes the conversion of Modula-2 printing to the value-based
API. It does so by copying the body of m2_val_print into
m2_value_print_inner, and then introducing new functions as needed to
use the value API.
The "val_" API code continues to exist, because it's still possible
for it to be called via some paths. This code will all be removed at
the end of the series.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* m2-valprint.c (m2_print_unbounded_array): New overload.
(m2_print_unbounded_array): Update.
(m2_print_array_contents): Take a struct value.
(m2_value_print_inner): Rewrite.
As with Rust and Go, it was straightforward to convert D to the
value-based API directly.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* d-valprint.c (dynamic_array_type): Call d_value_print_inner.
(d_value_print_inner): New function.
* d-lang.h (d_value_print_inner): Declare.
* d-lang.c (d_language_defn): Use d_value_print_inner.
This introduces go_value_print_inner, a modified copy of go_val_print.
Unlike some of the other languages, Go was straightforward to convert
to the value-based API all at once, so this patch takes that approach.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* go-valprint.c (go_value_print_inner): New function.
* go-lang.h (go_value_print_inner): Declare.
* go-lang.c (go_language_defn): Use go_value_print_inner.
For Rust, it was simple to convert the printing code to the
value-based API all at once.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* rust-lang.c (val_print_struct, rust_print_enum): Use the value
API.
(rust_val_print): Rewrite.
(rust_value_print_inner): New function, from rust_val_print.
(rust_language_defn): Use rust_value_print_inner.
This introduces c_value_print_inner, which implements the
la_value_print_inner method for the C family of languages. In this
patch, it is just a simple wrapper of c_val_print. However,
subsequent patches will convert it to use the value API. The
transformation is done this way to make each patch easier to review.
Future patches will apply this same treatment to other languages as
well.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* opencl-lang.c (opencl_language_defn): Use c_value_print_inner.
* objc-lang.c (objc_language_defn): Use c_value_print_inner.
* c-valprint.c (c_value_print_inner): New function.
* c-lang.h (c_value_print_inner): Declare.
* c-lang.c (c_language_defn, cplus_language_defn)
(asm_language_defn, minimal_language_defn): Use
c_value_print_inner.
pascal_object_print_value_fields is only needed in p-valprint.c, so
make it static.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* p-valprint.c (pascal_object_print_value_fields): Now static.
* p-lang.h (pascal_object_print_value_fields): Don't declare.
This slightly simplifies c_val_print_array by moving a variable to a
more inner scope and removing a dead assignment.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* c-valprint.c (c_val_print_array): Simplify.
This introduces value_print_array_elements, which is an analogue of
val_print_array_elements that uses the value API.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* valprint.c (value_print_array_elements): New function.
* valprint.h (value_print_array_elements): Declare.
A couple of spots could be easily converted to use
value_print_scalar_formatted. This patch makes this change.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* printcmd.c (print_formatted): Use value_print_scalar_formatted.
* mips-tdep.c (mips_print_register): Use
value_print_scalar_formatted.
This introduces a value_print_scalar_formatted, which is an analogue
of val_print_scalar_formatted that uses the value API.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* valprint.h (value_print_scalar_formatted): Declare.
* valprint.c (value_print_scalar_formatted): New function.
This introduces generic_value_print, which is a value-based analogue
to generic_val_print. For now this is unused and simply calls
generic_val_print, but subsequent patches will both change this
function to work using the value API directly, and convert callers of
generic_val_print to call this instead.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* valprint.h (generic_value_print): Declare.
* valprint.c (generic_value_print): New function.
The plan for removing val_print is, essentially, to first duplicate
printing code as needed to use the value API; and then remove the
val_print code. This makes it possible to do the changes
incrementally while keeping everything working.
This adds a new la_value_print_inner function pointer to struct
language_defn. Eventually this will replace la_val_print. This patch
also changes printing to prefer this API, when available -- but no
language defines it yet.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* valprint.c (do_val_print): Call la_value_print_inner, if
available.
* rust-lang.c (rust_language_defn): Update.
* p-lang.c (pascal_language_defn): Update.
* opencl-lang.c (opencl_language_defn): Update.
* objc-lang.c (objc_language_defn): Update.
* m2-lang.c (m2_language_defn): Update.
* language.h (struct language_defn) <la_value_print_inner>: New
member.
* language.c (unknown_language_defn, auto_language_defn): Update.
* go-lang.c (go_language_defn): Update.
* f-lang.c (f_language_defn): Update.
* d-lang.c (d_language_defn): Update.
* c-lang.c (c_language_defn, cplus_language_defn)
(asm_language_defn, minimal_language_defn): Update.
* ada-lang.c (ada_language_defn): Update.
This changes c_value_print to call common_val_print. This is more
complicated than the usual sort of common_val_print change, due to the
handling of RTTI.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* c-valprint.c (c_value_print): Use common_val_print.
gdb/testsuite/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* gdb.base/printcmds.exp (test_print_strings): Add regression
test.
* gdb.base/printcmds.c (charptr): New typedef.
(teststring2): New global.
This changes a spot in cp-valprint.c to use common_val_print rather
than val_print.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* cp-valprint.c (cp_print_static_field): Use common_val_print.
This changes a couple spots in f-valprint.c to use common_val_print
rather than val_print.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* f-valprint.c (f77_print_array_1, f_val_print): Use
common_val_print.
This changes some spots in riscv-tdep.c to use common_val_print rather
than val_print.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* riscv-tdep.c (riscv_print_one_register_info): Use
common_val_print.
This changes a spot in mi-main.c to use common_val_print rather than
val_print.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* mi/mi-main.c (output_register): Use common_val_print.
This changes some spots in infcmd.c to use common_val_print (which,
despite its name, is a value-based API) rather than val_print.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* infcmd.c (default_print_one_register_info): Use
common_val_print.
A (much) later patch will remove the call to value_check_printable
from common_val_print. This will needed to preserve some details of
how optimized-out structures are printed.
However, doing this will also break dw2-op-out-param.exp. Making the
change causes "bt" to print:
However, the test wants to see:
... operand2=<optimized out>
That is, a wholly-optimized out structure should not print its fields.
So, this patch introduces a new common_val_print_checked, which calls
value_check_printable first, and then arranges to use it in the one
spot that affects the test suite.
I was not completely sure if it would be preferable to change the
test. However, I reasoned that, assuming this output was intentional
in the first place, in a backtrace space is at a premium and so this
is a reasonable approach. In other spots calling common_val_print,
this behavior is probably unintended, or at least a "don't care".
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* valprint.h (common_val_print_checked): Declare.
* valprint.c (common_val_print_checked): New function.
* stack.c (print_frame_arg): Use common_val_print_checked.
This changes val_print and common_val_print to use a new helper
function. A theme in the coming patches is that calls to val_print
itself should be removed. This is the first such patch; at the end of
the series, we'll remove val_print and simplify do_val_print.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* valprint.c (do_val_print): New function, from val_print.
(val_print): Use do_val_print.
(common_val_print): Use do_val_print.
Switching the low-level printing to use the value API means we will be
using more temporary values. This adds a scoped_value_mark to
value_print, so that these intermediates are destroyed in a timely
way.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* valprint.c (value_print): Use scoped_value_mark.
Consider test-case gdb.dwarf2/imported-unit.exp.
It contains a CU with type int:
...
<0><129>: Abbrev Number: 2 (DW_TAG_compile_unit)
<12a> DW_AT_language : 4 (C++)
<12b> DW_AT_name : imported_unit.c
<1><13b>: Abbrev Number: 3 (DW_TAG_base_type)
<13c> DW_AT_byte_size : 4
<13d> DW_AT_encoding : 5 (signed)
<13e> DW_AT_name : int
...
which is imported in another CU:
...
<0><d2>: Abbrev Number: 2 (DW_TAG_compile_unit)
<d3> DW_AT_language : 4 (C++)
<d4> DW_AT_name : <artificial>
<1><e1>: Abbrev Number: 3 (DW_TAG_imported_unit)
<e2> DW_AT_import : <0x129> [Abbrev Number: 2]
...
However, if we print the partial symbols:
...
$ gdb -batch imported-unit -ex "maint print psymbols"
...
we see type int both in the importing CU:
...
Partial symtab for source file <artificial>@0xc7 (object 0x29f9b80)
...
Depends on 1 other partial symtabs.
0 0x2a24240 imported_unit.c
Global partial symbols:
`main', function, 0x4004b2
Static partial symbols:
`int', type, 0x0
...
and in the imported CU:
...
Partial symtab for source file imported_unit.c (object 0x2a24240)
...
Depends on 0 other partial symtabs.
Shared partial symtab with user 0x29f9b80
Static partial symbols:
`int', type, 0x0
...
This is an artefact resulting from the fact that all CUs in an objfile
share the same storage array for static partial symbols (and another array for
global partial symbols), using a range to describe their symbols.
Then when scanning the partial symbols of a CU and encountering an import, either:
- the referred CU has not been parsed yet, and will be parsed, and the range of
static partial symbols of the referred CU will be a subrange of the range of
static partial symbols of this CU, or
- the referred CU has already been parsed, and the range of static partial
symbols of the referred CU will not be a subrange of the range of static
partial symbols of this CU.
This is inconsistent handling, and confuses the notion of a symbol belonging to
a single symtab.
Furthermore, it might slow down searches, given that the symbol needs to be
skipped twice.
Finally, the same issue holds for global partial symbols, where the range of a
CU is sorted after parsing is finished. Obviously sorting the range of a CU
may invalidate subranges, effectively moving symbols in and out of imported
CUs.
Fix this for both static and global partial symbols, by gathering partial
symbols in a per-CU vector, and adding those symbols to the per-objfile
storage only once complete.
Tested on x86_64-linux, with native and board cc-with-dwz and cc-with-dwz-m.
gdb/ChangeLog:
2020-03-13 Tom de Vries <tdevries@suse.de>
PR symtab/25646
* psymtab.c (partial_symtab::partial_symtab): Don't set
globals_offset and statics_offset. Push element onto
current_global_psymbols and current_static_psymbols stacks.
(concat): New function.
(end_psymtab_common): Set globals_offset and statics_offset. Pop
element from current_global_psymbols and current_static_psymbols
stacks. Concat popped elements to global_psymbols and
static_symbols.
(add_psymbol_to_list): Use current_global_psymbols and
current_static_psymbols stacks.
* psymtab.h (class psymtab_storage): Add current_global_psymbols and
current_static_psymbols fields.
gdb/testsuite/ChangeLog:
2020-03-13 Tom de Vries <tdevries@suse.de>
PR symtab/25646
* gdb.dwarf2/imported-unit.exp: Add test.
There are no more callers to deprecated_add_core_fns, now that I have
removed the usage from CRIS and ARM/NetBSD. So this patch cleans up
all the related code and makes corelow.c a lot more readable.
gdb/ChangeLog:
2020-03-12 Christian Biesinger <cbiesinger@google.com>
* corelow.c (sniff_core_bfd): Remove.
(class core_target) <m_core_vec>: Remove.
(core_target::core_target): Update.
(core_file_fns): Remove.
(deprecated_add_core_fns): Remove.
(default_core_sniffer): Remove.
(sniff_core_bfd): Remove.
(default_check_format): Remove.
(gdb_check_format): Remove.
(core_target_open): Update.
(core_target::get_core_register_section): Update.
(get_core_registers_cb): Update.
(core_target::fetch_registers): Update.
* gdbcore.h (struct core_fns): Remove.
(deprecated_add_core_fns): Remove.
(default_core_sniffer): Remove.
(default_check_format): Remove.
Some arm-tdep.c data structures use a bfd_vma. A couple of spots will
warn about an implicit narrowing cast when building a gdb where
CORE_ADDR is 64-bit but bfd_vma is 32-bit.
This patch silences these warnings by changing the types in question
to CORE_ADDR.
gdb/ChangeLog
2020-03-12 Tom Tromey <tom@tromey.com>
* arm-tdep.c (struct arm_mapping_symbol) <value>: Now a
CORE_ADDR.
(struct arm_exidx_entry) <addr>: Now a CORE_ADDR.
A few spots in gdb use sprintf_vma to print a CORE_ADDR. This will
fail on a 32-bit build once CORE_ADDR is always a 64-bit type.
This patch replaces these calls with phex instead.
gdb/ChangeLog
2020-03-12 Tom Tromey <tom@tromey.com>
* remote.c (remote_target::download_tracepoint)
(remote_target::enable_tracepoint)
(remote_target::disable_tracepoint): Use phex, not sprintf_vma.
* breakpoint.c (print_recreate_masked_watchpoint): Use phex, not
sprintf_vma.
symfile-mem.c has some assertions about the size of various types, to
ensure that gdb and BFD don't get out of sync in a way that would
cause bugs.
Once CORE_ADDR is always 64-bit, one of these assertions can fail for
a 32-bit BFD build. However, the real requirement here is just that
CORE_ADDR is wider -- because this code promotes a bfd_vma to a
CORE_ADDR.
This patch corrects the assert.
gdb/ChangeLog
2020-03-12 Tom Tromey <tom@tromey.com>
* symfile-mem.c: Update CORE_ADDR size assert.
The selftest.m4 file is used by gdb, gdbserver and gdbsupport, I think
it belongs in gdbsupport.
gdb/ChangeLog:
* selftest.m4: Move to gdbsupport/.
* acinclude.m4: Update path to selftest.m4.
gdbserver/ChangeLog:
* acinclude.m4: Update path to selftest.m4.
gdbsupport/ChangeLog:
* selftest.m4: Moved from gdb/.
* acinclude.m4: Update path to selftest.m4.
While working on the preceding selftests patches, I noticed that some
selftests-specific files are included in the build even when selftests
are disabled, namely disasm-selftest.c and gdbarch-selftests.c. These
files are entirely #if'ed out when building with selftests disabled.
This is not a huge problem, but I think it would make more sense if
these files were simply not built.
With this patch, I propose to put all the selftests-specific source
files into a SELFTESTS_SRCS Makefile variable (even selftest-arch.c,
which is currently added by the configure script).
gdb/ChangeLog:
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Rename to...
(SELFTESTS_SRCS): ... this. Add disasm-selftests.c,
gdbarch-selfselftests.c and selftest-arch.c.
(SUBDIR_UNITTESTS_OBS): Rename to...
(SELFTESTS_OBS): ... this.
(COMMON_SFILES): Remove disasm-selftests.c and
gdbarch-selftests.c.
* configure.ac: Don't add selftest-arch.{c,o} to
CONFIG_{SRCS,OBS}.
* disasm-selftests.c, gdbarch-selftests.c: Remove GDB_SELF_TEST
preprocessor conditions.
The same is done for gdb, gdbserver and gdbsupport. I therefore think
it makes sense to move that to GDB_AC_COMMON.
It is required to move the call to GDB_AC_COMMON so it is before
GDB_AC_SELFTEST in gdbserver/configure.ac, otherwise the $development
variable isn't set when the code behind GDB_AC_SELFTEST executes.
gdb/ChangeLog:
* configure.ac: Don't source bfd/development.sh.
* selftest.m4: Modify comment.
* configure: Re-generate.
gdbserver/ChangeLog:
* configure.ac: Don't source bfd/development.sh, move
GDB_AC_COMMON higher.
* configure: Re-generate.
gdbsupport/ChangeLog:
* configure.ac: Don't source bfd/development.sh.
* common.m4: Source bfd/development.sh.
* configure: Re-generate.
Before commit 3d1e5a43cb ("gdbsupport/configure.ac: source
development.sh"), the GDB build in non-development mode (turn
development to false in bfd/development.sh if you want to try) was
broken because the gdbsupport configure script didn't source
bfd/development.sh to set the development variable.
Since the GDB_AC_SELFTEST macro relies on the `development` variable, I
propose to modify it such that it errors out if $development does not
have an expected value of "true" or "false". This could prevent a
future similar problem from happening while refactoring the configure
scripts. It would have caught the problem fixed by the patch mentioned
earlier.
gdb/ChangeLog:
* selftest.m4 (GDB_AC_SELFTEST): Error out if $development is
not "true" or "false".
* configure: Re-generate.
gdbserver/ChangeLog:
* configure: Re-generate.
gdbsupport/ChangeLog:
* configure: Re-generate.
This is in preparation for deleting deprecated_add_core_fns and
related code.
As a side-effect, this makes it possible to read NetBSD/ARM
core files on non-NetBSD/ARM platforms, subject to PR corefiles/25638.
I have removed this comment:
- /* This is ok: we're running native... */
Since we are using the gdbarch from the regcache, we should be
guaranteed to be calling the right function here, so it shouldn't
matter whether we are running native.
Tested by reading a NetBSD/ARM core file on Linux/x86-64 and NetBSD/ARM;
the "info registers" output matches the one from the system GDB.
gdb/ChangeLog:
2020-03-12 Christian Biesinger <cbiesinger@google.com>
* Makefile.in (HFILES_NO_SRCDIR): Add new arm-nbsd-tdep.h file.
* arm-nbsd-nat.c (arm_supply_gregset): Moved to arm-nbsd-tdep and
renamed to arm_nbsd_supply_gregset.
(fetch_register): Update to call arm_nbsd_supply_gregset.
(fetch_regs): Remove in favor of fetch_register with a -1 regno.
(arm_netbsd_nat_target::fetch_registers): Update.
(fetch_elfcore_registers): Removed.
(_initialize_arm_netbsd_nat): Removed call to deprecated_add_core_fns.
* arm-nbsd-tdep.c (struct arm_nbsd_reg): New struct.
(arm_nbsd_supply_gregset): Moved from arm-nbsd-nat.c and updated to
not require NetBSD system headers.
(arm_nbsd_regset): New struct.
(arm_nbsd_iterate_over_regset_sections): New function.
(arm_netbsd_init_abi_common): Updated to call
set_gdbarch_iterate_over_regset_sections.
* arm-nbsd-tdep.h: New file.
A patch somewhat like this patch has been in Fedora GDB for well over
a decade. The Fedora patch was written by Jan Kratochvil. The Fedora
version prints a warning and attempts to continue. This version will
error out, fatally. An earlier version of this patch was more like
the Fedora version than this one. Simon Marchi recommended use of an
assertion to test for the infinite recursion; I decided to use an
explicit test (with an "if" statement) along with a call to
internal_error() if the condition is met. This way, I could include
a plea to file a bug report.
It was motivated by a customer reported bug (back in 2006!) which
showed infinite mutual recursion between find_pc_sect_line and
find_pc_line. Here is a portion of the backtrace from the bug report:
(gdb) bt
#0 0x00000000004450a4 in lookup_minimal_symbol_by_pc_section (
pc=251700325328, section=0x570f500) at gdb/minsyms.c:484
#1 0x00000000004bbfb2 in find_pc_sect_line (pc=251700325328,
section=0x570f500, notcurrent=0) at gdb/symtab.c:2057
#2 0x00000000004bc480 in find_pc_line (pc=251700325328, notcurrent=0)
at gdb/symtab.c:2232
#3 0x00000000004bc1ff in find_pc_sect_line (pc=251700325328,
section=0x570f500, notcurrent=0) at gdb/symtab.c:2081
... (lots and lots of the same two functions with the same parameters)
#1070 0x00000000004bc480 in find_pc_line (pc=251700325328, notcurrent=0)
at gdb/symtab.c:2232
#1071 0x00000000004bc1ff in find_pc_sect_line (pc=251700325328,
section=0x570f500, notcurrent=0) at gdb/symtab.c:2081
#1072 0x00000000004bc480 in find_pc_line (pc=251700325328, notcurrent=0)
at gdb/symtab.c:2232
#1073 0x00000000004bc1ff in find_pc_sect_line (pc=251700325328,
section=0x570f500, notcurrent=0) at gdb/symtab.c:2081
#1074 0x00000000004bc480 in find_pc_line (pc=251700325328, notcurrent=0)
at gdb/symtab.c:2232
#1075 0x00000000004bc1ff in find_pc_sect_line (pc=251696794399,
section=0x59b0df8, notcurrent=0) at gdb/symtab.c:2081
#1076 0x00000000004bc480 in find_pc_line (pc=251696794399, notcurrent=0)
at gdb/symtab.c:2232
#1077 0x000000000055550e in find_frame_sal (frame=0xb3f3e0, sal=0x7fff1d1a8200)
at gdb/frame.c:1392
#1078 0x00000000004d86fd in set_current_sal_from_frame (frame=0x1648, center=1)
at gdb/stack.c:379
#1079 0x00000000004cf137 in normal_stop () at gdb/infrun.c:3147
...
The test case was a large application. Attempts were made to make a
small(er) test case, but those attempts were not successful.
Therefore, I cannot provide a new test for this patch.
That said, we ought to guard against recursively calling
find_pc_sect_line (via find_pc_line) with the identical PC value that
it had been called with. Should this happen, infinite recursion (as
shown in the above backtrace) is the result. This patch prevents
that from happening.
If this should happens, there is a bug somewhere, perhaps in GDB, perhaps
in some other part of the toolchain or a library. We error out fatally
with a message briefly describing the condition along with a plea to file
a bug report.
I spent some time looking at the surrounding code and commentary which
handle the case of PC being in a stub/trampoline. It first appeared
in the public GDB repository in April, 1999. The ChangeLog entry for
this commit is from 1998-12-31. The relevant portion is:
(find_pc_sect_line): Return correct information if pc is in import
or export stub (trampoline).
What's remarkable about the overall ChangeLog entry is that it's over
2500+ lines long! I believe that this was part of the infamous "HP
merge" (in which insufficient due diligence was given in accepting
a large batch of changes from an outside source). In the years that
followed, much of this code was either significantly revised or
outright removed.
For this particular case, I'm grateful that extensive comments were
provided by "RT". (I haven't been able to figure out who RT is/was.)
I've decided against attempting to revise this stub/trampoline handling
code any further than adding Jan's test which prevents an obvious case
of infinite recursion.
I've tested on Fedora 31, x86-64. I see no regressions. I've also
searched the logfile for the new message, but as expected, no message
was found (which is good).
gdb/ChangeLog:
* symtab.c (find_pc_sect_line): Add check which prevents infinite
recursion.
Change-Id: I595470be6ab5f61ca7e4e9e70c61a252c0deaeaa
While compiling with clang, I noticed it didn't catch cases where my
function declaration didn't match my function definition. This is
normally caught by gcc with -Wmissing-declarations.
On clang, this is caught by -Wmissing-prototypes instead.
Note that on gcc, -Wmissing-prototypes also exists, but is only valid
for C and Objective-C. It gets correctly rejected by the configure
script since gcc rejects it with:
cc1plus: error: command line option '-Wmissing-prototypes' is valid for C/ObjC but not for C++ -Werror
So this warning flag ends up not used for gcc (which is what we want).
gdb/ChangeLog:
* configure: Re-generate.
gdbserver/ChangeLog:
* configure: Re-generate.
gdbsupport/ChangeLog:
* configure: Re-generate.
* warning.m4: Enable -Wmissing-prototypes.
A comment in ada-typeprint.c mentions the Unchecked_Variant pragma.
However, this does not exist, and the comment should actually mention
Unchecked_Union.
gdb/ChangeLog
2020-03-11 Tom Tromey <tromey@adacore.com>
* ada-typeprint.c (print_choices): Fix comment.
This commit:
commit 8c95582da8
Date: Mon Dec 30 21:04:51 2019 +0000
gdb: Add support for tracking the DWARF line table is-stmt field
Introduced an invalid memory access, by reading outside the bounds of
an array.
This would cause this valgrind error:
==7633== Invalid read of size 4
==7633== at 0x4D002C: buildsym_compunit::record_line(subfile*, int, unsigned long, bool) (buildsym.c:688)
==7633== by 0x5F60A5: dwarf_record_line_1(gdbarch*, subfile*, unsigned int, unsigned long, bool, dwarf2_cu*) (read.c:19956)
==7633== by 0x5F63B0: lnp_state_machine::record_line(bool) (read.c:20024)
==7633== by 0x5F5DD5: lnp_state_machine::handle_special_opcode(unsigned char) (read.c:19851)
==7633== by 0x5F6706: dwarf_decode_lines_1(line_header*, dwarf2_cu*, int, unsigned long) (read.c:20135)
==7633== by 0x5F6C57: dwarf_decode_lines(line_header*, char const*, dwarf2_cu*, dwarf2_psymtab*, unsigned long, int) (read.c:20328)
==7633== by 0x5DF5F1: handle_DW_AT_stmt_list(die_info*, dwarf2_cu*, char const*, unsigned long) (read.c:10748)
==7633== by 0x5DF823: read_file_scope(die_info*, dwarf2_cu*) (read.c:10796)
==7633== by 0x5DDA63: process_die(die_info*, dwarf2_cu*) (read.c:9815)
==7633== by 0x5DD44A: process_full_comp_unit(dwarf2_per_cu_data*, language) (read.c:9580)
==7633== by 0x5DAB58: process_queue(dwarf2_per_objfile*) (read.c:8867)
==7633== by 0x5CB30E: dw2_do_instantiate_symtab(dwarf2_per_cu_data*, bool) (read.c:2374)
==7633== Address 0xa467f48 is 8 bytes before a block of size 16,024 alloc'd
==7633== at 0x4C2CDCB: malloc (vg_replace_malloc.c:299)
==7633== by 0x451FC4: xmalloc (alloc.c:60)
==7633== by 0x4CFFDF: buildsym_compunit::record_line(subfile*, int, unsigned long, bool) (buildsym.c:678)
==7633== by 0x5F60A5: dwarf_record_line_1(gdbarch*, subfile*, unsigned int, unsigned long, bool, dwarf2_cu*) (read.c:19956)
==7633== by 0x5F63B0: lnp_state_machine::record_line(bool) (read.c:20024)
==7633== by 0x5F5DD5: lnp_state_machine::handle_special_opcode(unsigned char) (read.c:19851)
==7633== by 0x5F6706: dwarf_decode_lines_1(line_header*, dwarf2_cu*, int, unsigned long) (read.c:20135)
==7633== by 0x5F6C57: dwarf_decode_lines(line_header*, char const*, dwarf2_cu*, dwarf2_psymtab*, unsigned long, int) (read.c:20328)
==7633== by 0x5DF5F1: handle_DW_AT_stmt_list(die_info*, dwarf2_cu*, char const*, unsigned long) (read.c:10748)
==7633== by 0x5DF823: read_file_scope(die_info*, dwarf2_cu*) (read.c:10796)
==7633== by 0x5DDA63: process_die(die_info*, dwarf2_cu*) (read.c:9815)
==7633== by 0x5DD44A: process_full_comp_unit(dwarf2_per_cu_data*, language) (read.c:9580)
gdb/ChangeLog:
* buildsyms.c (buildsym_compunit::record_line): Avoid accessing
previous item in the list, when the list has no items.
When using the executable from test-case gdb.ada/access_to_packed_array.exp
(read-in using -readnow) and printing the symbols using "maint print symbols",
we run into a segv:
...
$ gdb -readnow -batch access_to_packed_array/foo -ex "maint print symbols"
...
info: array (<>) of character; computed at runtime
ptr: range 0 .. 2147483647; computed at runtime
Aborted (core dumped)
...
What happens is that dwarf2_evaluate_property gets called and sets the local
frame variable to the current frame, which happens to be NULL. Subsequently
the PROP_LOCLIST handling code is executed, where get_frame_address_in_block
gets called with argument NULL, and the segv is triggered.
Fix this by handling a NULL frame in the PROP_LOCLIST handling code in
dwarf2_evaluate_property.
Build and reg-tested on x86_64-linux.
gdb/ChangeLog:
2020-03-11 Tom de Vries <tdevries@suse.de>
* dwarf2/loc.c (dwarf2_evaluate_property): Handle NULL frame in
PROP_LOCLIST handling code.
gdb/testsuite/ChangeLog:
2020-03-11 Tom de Vries <tdevries@suse.de>
* gdb.ada/access_to_packed_array.exp: Test printing of expanded
symtabs.
This commit brings support for the DWARF line table is_stmt field to
GDB. The is_stmt field is used by the compiler when a single source
line is split into multiple assembler instructions, especially if the
assembler instructions are interleaved with instruction from other
source lines.
The compiler will set the is_stmt flag false from some instructions
from the source lines, these instructions are not a good place to
insert a breakpoint in order to stop at the source line.
Instructions which are marked with the is_stmt flag true are a good
place to insert a breakpoint for that source line.
Currently GDB ignores all instructions for which is_stmt is false.
This is fine in a lot of cases, however, there are some cases where
this means the debug experience is not as good as it could be.
Consider stopping at a random instruction, currently this instruction
will be attributed to the last line table entry before this point for
which is_stmt was true - as these are the only line table entries that
GDB tracks. This can easily be incorrect in code with even a low
level of optimisation.
With is_stmt tracking in place, when stopping at a random instruction
we now attribute the instruction back to the real source line, even
when is_stmt is false for that instruction in the line table.
When inserting breakpoints we still select line table entries for
which is_stmt is true, so the breakpoint placing behaviour should not
change.
When stepping though code (at the line level, not the instruction
level) we will still stop at instruction where is_stmt is true, I
think this is more likely to be the desired behaviour.
Instruction stepping is, of course, unchanged, stepping one
instruction at a time, but we should now report more accurate line
table information with each instruction step.
The original motivation for this work was a patch posted by Bernd
here:
https://sourceware.org/ml/gdb-patches/2019-11/msg00792.html
As part of that thread it was suggested that many issues would be
resolved if GDB supported line table views, this isn't something I've
attempted in this patch, though reading the spec, it seems like this
would be a useful feature to support in GDB in the future. The spec
is here:
http://dwarfstd.org/ShowIssue.php?issue=170427.1
And Bernd gives a brief description of the benefits here:
https://sourceware.org/ml/gdb-patches/2020-01/msg00147.html
With that all said, I think that there is benefit to having proper
is_stmt support regardless of whether we have views support, so I
think we should consider getting this in first, and then building view
support on top of this.
The gdb.cp/step-and-next-inline.exp test is based off a test proposed
by Bernd Edlinger in this message:
https://sourceware.org/ml/gdb-patches/2019-12/msg00842.html
gdb/ChangeLog:
* buildsym-legacy.c (record_line): Pass extra parameter to
record_line.
* buildsym.c (buildsym_compunit::record_line): Take an extra
parameter, reduce duplication in the line table, and record the
is_stmt flag in the line table.
* buildsym.h (buildsym_compunit::record_line): Add extra
parameter.
* disasm.c (do_mixed_source_and_assembly_deprecated): Ignore
non-statement lines.
* dwarf2/read.c (dwarf_record_line_1): Add extra parameter, pass
this to the symtab builder.
(dwarf_finish_line): Pass extra parameter to dwarf_record_line_1.
(lnp_state_machine::record_line): Pass a suitable is_stmt flag
through to dwarf_record_line_1.
* infrun.c (process_event_stop_test): When stepping, don't stop at
a non-statement instruction, and only refresh the step info when
we land in the middle of a line's range. Also add an extra
comment.
* jit.c (jit_symtab_line_mapping_add_impl): Initialise is_stmt
field.
* record-btrace.c (btrace_find_line_range): Only record lines
marked as is-statement.
* stack.c (frame_show_address): Show the frame address if we are
in a non-statement sal.
* symmisc.c (dump_symtab_1): Print the is_stmt flag.
(maintenance_print_one_line_table): Print a header for the is_stmt
column, and include is_stmt information in the output.
* symtab.c (find_pc_sect_line): Find lines marked as statements in
preference to non-statements.
(find_pcs_for_symtab_line): Prefer is-statement entries.
(find_line_common): Likewise.
* symtab.h (struct linetable_entry): Add is_stmt field.
(struct symtab_and_line): Likewise.
* xcoffread.c (arrange_linetable): Initialise is_stmt field when
arranging the line table.
gdb/testsuite/ChangeLog:
* gdb.cp/step-and-next-inline.cc: New file.
* gdb.cp/step-and-next-inline.exp: New file.
* gdb.cp/step-and-next-inline.h: New file.
* gdb.dwarf2/dw2-is-stmt.c: New file.
* gdb.dwarf2/dw2-is-stmt.exp: New file.
* gdb.dwarf2/dw2-is-stmt-2.c: New file.
* gdb.dwarf2/dw2-is-stmt-2.exp: New file.
* gdb.dwarf2/dw2-ranges-base.exp: Update line table pattern.
Gcc supports an option -feliminate-dwarf2-dups (up until gcc-7, removed in
gcc-8).
When running tests with target board unix/-feliminate-dwarf2-dups, we run
into:
...
(gdb) PASS: gdb.ada/arraydim.exp: print m'length(3)
ptype global_3dim_for_gdb_testing^M
type = array (Unexpected type in ada_discrete_type_low_bound.^M
(gdb) FAIL: gdb.ada/arraydim.exp: ptype global_3dim_for_gdb_testing
...
The DWARF for the variable global_3dim_for_gdb_testing looks as follows:
...
<0><824>: Abbrev Number: 1 (DW_TAG_compile_unit)
<825> DW_AT_name : src/gdb/testsuite/gdb.ada/arraydim/inc.c
<1><832>: Abbrev Number: 2 (DW_TAG_array_type)
<833> DW_AT_type : <0x874>
<2><837>: Abbrev Number: 3 (DW_TAG_subrange_type)
<838> DW_AT_type : <0x84a>
<83c> DW_AT_upper_bound : 0
<2><83d>: Abbrev Number: 3 (DW_TAG_subrange_type)
<83e> DW_AT_type : <0x84a>
<842> DW_AT_upper_bound : 1
<2><843>: Abbrev Number: 3 (DW_TAG_subrange_type)
<844> DW_AT_type : <0x84a>
<848> DW_AT_upper_bound : 2
<2><849>: Abbrev Number: 0
<1><84a>: Abbrev Number: 4 (DW_TAG_typedef)
<84b> DW_AT_type : <0x86d>
<1><84f>: Abbrev Number: 0
<0><85b>: Abbrev Number: 5 (DW_TAG_compile_unit)
<861> DW_AT_name : src/gdb/testsuite/gdb.ada/arraydim/inc.c
<1><86d>: Abbrev Number: 6 (DW_TAG_base_type)
<86e> DW_AT_byte_size : 8
<86f> DW_AT_encoding : 7 (unsigned)
<870> DW_AT_name : long unsigned int
<1><874>: Abbrev Number: 7 (DW_TAG_base_type)
<875> DW_AT_byte_size : 4
<876> DW_AT_encoding : 5 (signed)
<877> DW_AT_name : int
<1><87b>: Abbrev Number: 8 (DW_TAG_variable)
<87c> DW_AT_name : global_3dim_for_gdb_testing
<882> DW_AT_type : <0x832>
<886> DW_AT_external : 1
...
The DWARF contains an anonymous typedef at 0x84a, referring to 0x86d.
Strictly speaking, the anonymous typedef is illegal DWARF, because a
DW_TAG_typedef is defined to have an DW_AT_name attribute containing the name
of the typedef as it appears in the source program.
The DWARF reading code creates a corresponding type for this typedef, which
goes on to confuse the code handling arrays.
Rather than trying to support the type representing this anonymous typedef in
all the locations where it causes problems, fix this by treating the anonymous
typedef as a forwarder DIE in the DWARF reader.
Tested on x86_64-linux, with target boards unix and
unix/-feliminate-dwarf2-dups.
This fixes ~85 failures for unix/-feliminate-dwarf2-dups.
gdb/ChangeLog:
2020-03-07 Tom de Vries <tdevries@suse.de>
* dwarf2/read.c (read_typedef): Treat anonymous typedef as forwarder
DIE.
While working on complex number support, I found a couple of
apparently obsolete coments. This removes them.
2020-03-07 Tom Tromey <tom@tromey.com>
* valops.c (value_literal_complex): Remove obsolete comment.
* gdbtypes.h (enum type_code) <TYPE_CODE_FLT>: Remove obsolete
comment.
[ Migrating this from Gerrit: https://gnutoolchain-gerrit.osci.io/r/c/binutils-gdb/+/321 ]
I noticed that some functions in infcmd and infrun call each other and
all call inferior_thread, while they could just get the thread_info
pointer from their caller. That means less calls to inferior_thread, so
less reliance on global state, since inferior_thread reads
inferior_ptid.
The paths I am unsure about are:
- fetch_inferior_event calls...
- step_command_fsm::should_stop calls...
- prepare_one_step
and
- process_event_stop_test calls...
- set_step_info
Before this patch, prepare_one_step gets the thread pointer using
inferior_thread. After this patch, it gets it from the
execution_control_state structure in fetch_inferior_event. Are we sure
that the thread from the execution_control_state structure is the same
as the one inferior_thread would return? This code path is used when a
thread completes a step, but the user had specified a step count (e.g.
"step 5") so we decide to do one more step. It would be strange (and
even a bug I suppose) if the thread in the ecs structure in
fetch_inferior_event was not the same thread that is prepared to stepped
by prepare_one_step. So I believe passing the ecs thread is fine.
The same logic applies to process_event_stop_test calling
set_step_info.
gdb/ChangeLog:
* infrun.h: Forward-declare thread_info.
(set_step_info): Add thread_info parameter, add doc.
* infrun.c (set_step_info): Add thread_info parameter, move doc
to header.
* infrun.c (process_event_stop_test): Pass thread to
set_step_info call.
* infcmd.c (set_step_frame): Add thread_info pointer, pass it to
set_step_info.
(prepare_one_step): Add thread_info parameter, pass it to
set_step_frame and prepare_one_step (recursive) call.
(step_1): Pass thread to prepare_one_step call.
(step_command_fsm::should_stop): Pass thread to
prepare_one_step.
(until_next_fsm): Pass thread to set_step_frame call.
(finish_command): Pass thread to set_step_info call.
The target_get_tib_address call always fails in this case, and there is an
error when changing the program with the file command:
(gdb) file allocer64.exe
Reading symbols from allocer64.exe...
You can't do that when your target is `exec'
Now it will skip this part, there is no need to rebase the executable without
an inferior anyways.
gdb/ChangeLog:
2020-03-06 Hannes Domani <ssbssa@yahoo.de>
* windows-tdep.c (windows_solib_create_inferior_hook):
Check if inferior is running.
Replace "the the" by "the".
gdb/ChangeLog:
2020-03-06 Tom de Vries <tdevries@suse.de>
* NEWS: Fix "the the".
* ctfread.c: Same.
gdb/doc/ChangeLog:
2020-03-06 Tom de Vries <tdevries@suse.de>
* gdb.texinfo: Fix "the the".
gdb/testsuite/ChangeLog:
2020-03-06 Tom de Vries <tdevries@suse.de>
* README: Fix "the the".
* gdb.base/dprintf.exp: Same.
Using verbose, we get some detail on symbol loading:
...
$ gdb a.out -iex "set verbose on"
Reading symbols from a.out...
Reading in symbols for /home/vries/hello.c...done.
(gdb)
...
And using debug symtab-create, much more detail:
...
$ gdb a.out -iex "set verbose on" -iex "set debug symtab-create 1"
Reading symbols from a.out...
Reading minimal symbols of objfile /data/gdb_versions/devel/lto/a.out ...
Installing 30 minimal symbols of objfile /data/gdb_versions/devel/lto/a.out.
Done reading minimal symbols.
Creating one or more psymtabs for objfile /data/gdb_versions/devel/lto/a.out ...
Created psymtab 0x35a3de0 for module ../sysdeps/x86_64/start.S.
Created psymtab 0x353e4e0 for module init.c.
Created psymtab 0x353e560 for module ../sysdeps/x86_64/crti.S.
Created psymtab 0x353e5e0 for module /home/vries/hello.c.
Created psymtab 0x35bd530 for module elf-init.c.
Created psymtab 0x35bd5b0 for module ../sysdeps/x86_64/crtn.S.
Reading in symbols for /home/vries/hello.c...Created compunit symtab 0x354bd20 for hello.c.
done.
(gdb)
...
The "Created compunit symtab" message gets inbetween the "Reading in symbols"
and the trailing "done.". [ Strictly speaking this is a regression since
commit faa17681cc "Make gdb_flush also flush the wrap buffer", but the
same problem happens when using -batch before this commit. ]
Fix this by removing the trailing "done." altogether, such that we get:
...
Created psymtab 0x3590520 for module ../sysdeps/x86_64/crtn.S.
Reading in symbols for /home/vries/hello.c...
Created compunit symtab 0x359dd20 for hello.c.
(gdb)
...
[ Alternatively, we could fix this emitting a "Done reading in symbols" line
or some such, like is done for minimal symbols. See above. ]
[ Note: Removing the trailing "done." for the "Reading symbols from" message
was done in commit 3453e7e409 'Clean up "Reading symbols" output'. ]
Build and reg-tested on x86_64-linux.
gdb/ChangeLog:
2020-03-06 Tom de Vries <tdevries@suse.de>
* psymtab.c (psymtab_to_symtab): Don't print "done.".
Copy the .dir-locls.el file from gdb/ to gdbserver/ and gdbsupport/ so
that we get the GNU/GDB style when editing these files in Emacs.
I initially wanted to remove the (c-mode . ((mode . c++))) that
switches c-mode files into c++-mode as we store C++ code in *.cc files
in the gdbserver/ directory, unlike gdb/ where we use *.c, however, I
was forgetting about the header files - we still use *.h for our C++
header files, so for now I left the settings in place to open all C
files in c++-mode.
We now have three copies of this file, which are all identical. It
would be nice if we could remove this duplication, however, for now we
haven't found a good way to do this.
Some options considered were:
1. Use symlinks to only have one copy of the file. This was
rejected as not all targets support symlinks in the way.
2. Have two of the .dir-locals.el files contain some mechanism by
which the third copy of the file is sourced. Though this would, in
theory, be possible, it would involve some advanced Emacs scripting,
would be fragile, and a maintenance burdon.
3. Move the .dir-locals up into top level src/ directory, then use
Emacs dir-locals directory pattern matching to only apply the rules
for the three directories we care about. The problem is that each
directory has to be listed separately, so we still end up having to
duplicate all the rules.
In the end, it was decided that having three copies of the file,
though not ideal, is probably easiest for now. This was all discussed
in this mailing list thread:
https://sourceware.org/ml/gdb-patches/2020-03/msg00024.html
The copyright date in the new files is left as for gdb/.dir-locals.el,
as the new files are a copy of the old, this is inline with this rule:
https://sourceware.org/gdb/wiki/ContributionChecklist#Copyright_Header
gdb/ChangeLog:
* .dir-locals.el: Add a comment referencing the other copies of
this file.
gdbserver/ChangeLog:
* .dir-locals.el: New file.
gdbsupport/ChangeLog:
* .dir-locals.el: New file.
Create .gitattributes files in gdb/, gdbserver/, and gdbsupport/.
The files specify cpp-style diffs for .h and .c files. This is
particularly helpful if a class in a header file is modified.
For instance, if the `stop_requested` field of `thread_info` in
gdb/gdbthread.h is modified, we get the following diff with
'git diff' (using git version 2.17.1):
@@ -379,7 +379,7 @@ public:
struct target_waitstatus pending_follow;
/* True if this thread has been explicitly requested to stop. */
- int stop_requested = 0;
+ bool stop_requested = 0;
/* The initiating frame of a nexting operation, used for deciding
which exceptions to intercept. If it is null_frame_id no
Note that the context of the change shows up as 'public:'; not so
useful. With the .gitattributes file, we get:
@@ -379,7 +379,7 @@ class thread_info : public refcounted_object
struct target_waitstatus pending_follow;
/* True if this thread has been explicitly requested to stop. */
- int stop_requested = 0;
+ bool stop_requested = 0;
/* The initiating frame of a nexting operation, used for deciding
which exceptions to intercept. If it is null_frame_id no
The context is successfully shown as 'class thread_info'.
This patch creates a .gitattributes file per each of gdb, gdbserver,
and gdbsupport folders. An alternative would be to define the
attributes in the root folder -- this would impact all the top-level
folders, though. I opted for the more conservative approach.
gdb/ChangeLog:
2020-03-05 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* .gitattributes: New file.
gdbserver/ChangeLog:
2020-03-05 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* .gitattributes: New file.
gdbsupport/ChangeLog:
2020-03-05 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* .gitattributes: New file.
This introduces a string cache on the per-BFD object, replacing the
macro and filename caches. Both of these caches just store strings,
so this consolidation by itself saves a little memory (about the size
of a bcache per objfile).
Then this patch switches some allocations on the objfile obstack to
use this bcache instead. This saves more space; and turns out to be a
bit faster as well.
Here are the before and after "maint time" + "maint space" results of
"file ./gdb":
Command execution time: 4.664021 (cpu), 4.728518 (wall)
Space used: 39190528 (+29212672 for this command)
Command execution time: 4.216209 (cpu), 4.107023 (wall)
Space used: 36667392 (+26689536 for this command)
The main interface to the string cache is a new pair of overloaded
methods, objfile::intern.
gdb/ChangeLog
2020-03-04 Tom Tromey <tom@tromey.com>
* symmisc.c (print_symbol_bcache_statistics)
(print_objfile_statistics): Update.
* symfile.c (allocate_symtab): Use intern.
* psymtab.c (partial_symtab::partial_symtab): Use intern.
* objfiles.h (struct objfile_per_bfd_storage) <filename_cache,
macro_cache>: Remove.
<string_cache>: New member.
(struct objfile) <intern>: New methods.
* elfread.c (elf_symtab_read): Use intern.
* dwarf2/read.c (fixup_go_packaging): Intern package name.
(dwarf2_compute_name, dwarf2_physname)
(create_dwo_unit_in_dwp_v1, create_dwo_unit_in_dwp_v2): Intern
names.
(guess_partial_die_structure_name): Update.
(partial_die_info::fixup): Intern name.
(dwarf2_canonicalize_name): Change parameter to objfile. Intern
name.
(dwarf2_name): Intern name. Update.
* buildsym.c (buildsym_compunit::get_macro_table): Use
string_cache.
I noticed that gnutarget was not "const". Since writing through this
pointer would probably be a bug, I think it ought to be. This patch
makes the change.
gdb/ChangeLog
2020-03-04 Tom Tromey <tom@tromey.com>
* jit.c (bfd_open_from_target_memory): Make "target" const.
* corefile.c (gnutarget): Now const.
* gdbcore.h (gnutarget): Now const.
Revert the change since it breaks existing behavior of "info registers"
for some architectures. At least AArch64 and ARM are impacted by this change.
gdb/ChangeLog:
2020-03-04 Luis Machado <luis.machado@linaro.org>
Revert aa66aac47b due to regressions
in "info registers" for AArch64/ARM.
The change caused "info registers" to not print GPR's.
gdb/ChangeLog:
2020-02-01 Shahab Vahedi <shahab@synopsys.com>
* target-descriptions.c (tdesc_register_in_reggroup_p): Return 0
when reg->group is empty and reggroup is not.
A customer reported a failure to unwind in a certain core dump. A
lengthy investigation showed that the problem came from the
interaction between the tailcall and inline frame sniffers.
Normally, the regular DWARF unwinder may discover a chain of tail
calls ending in the current frame. In this case, it sets a member on
the dwarf2_frame_cache object, so that a subsequent call into the
tailcall sniffer will create the tailcall frames.
However, in this scenario, what happened is that the DWARF unwinder
did find tailcall frames -- but then the PC of the first such frame
was recognized and claimed by the inline frame sniffer.
This then caused unwinding to go astray further up the stack.
This patch fixes the problem by arranging for the tailcall sniffer to
be called before the inline sniffer. This way, if a DWARF frame has
tailcall information, the tailcalls will always be processed first.
This is safe to do, because the tailcall sniffer can only claim a
frame if the previous frame did in fact find this information. (So,
for example, if no DWARF frame is ever found, then this sniffer will
never trigger.)
This patch also partially reverts:
commit 1ec56e88aa
Author: Pedro Alves <palves@redhat.com>
Date: Fri Nov 22 13:17:46 2013 +0000
Eliminate dwarf2_frame_cache recursion, don't unwind from the dwarf2 sniffer (move dwarf2_tailcall_sniffer_first elsewhere).
That patch moved the call to dwarf2_tailcall_sniffer_first out of
dwarf2_frame_cache, and into dwarf2_frame_prev_register. However, in
this situation, this is too late -- by the time
dwarf2_frame_prev_register is called, the frame in question is already
recognized by the inline frame sniffer.
Rather than fully revert that patch, though, this just arranges to
call dwarf2_tailcall_sniffer_first from dwarf2_frame_cache -- which is
called shortly after the DWARF frame sniffer succeeds, via
compute_frame_id.
I don't know how to write a test case for this.
gdb/ChangeLog
2020-03-03 Tom Tromey <tromey@adacore.com>
* dwarf2/frame.c (struct dwarf2_frame_cache)
<checked_tailcall_bottom, entry_cfa_sp_offset,
entry_cfa_sp_offset_p>: Remove members.
(dwarf2_frame_cache): Call dwarf2_tailcall_sniffer_first.
(dwarf2_frame_prev_register): Don't call
dwarf2_tailcall_sniffer_first.
(dwarf2_append_unwinders): Don't append tailcall unwinder.
* frame-unwind.c (add_unwinder): New fuction.
(frame_unwind_init): Use it. Add tailcall unwinder.
GDB is not able to print logical true values for Flang compiler.
Actual result:
(gdb) p l
$1 = 4294967295
Expected result:
(gdb) p l
$1 = .TRUE.
This is due to GDB expecting representation of true value being 1.
The Fortran standard doesnt specify how LOGICAL types are represented.
Different compilers use different non-zero values to represent logical
true. The gfortran compiler uses 1 to represent logical true and the
flang compiler uses -1. GDB should accept all the non-zero values as
true.
This is achieved by handling TYPE_CODE_BOOL in f_val_print and
printing any non-zero value as true.
gdb/ChangeLog:
* f-valprint.c (f_val_print): Handle TYPE_CODE_BOOL, any non-zero
value should be printed as true.
gdb/testsuite/ChangeLog:
* gdb.fortran/logical.exp: Add tests that any non-zero value is
printed as true.
Windows executables linked with -dynamicbase get a new base address
when loaded, which makes debugging impossible if the executable isn't
also rebased in gdb.
The new base address is read from the Process Environment Block.
gdb/ChangeLog:
2020-03-03 Hannes Domani <ssbssa@yahoo.de>
* windows-tdep.c (windows_solib_create_inferior_hook): New function.
(windows_init_abi): Set and use windows_so_ops.
Back at:
commit 1f6f6e21fa
Author: Philippe Waroquiers <philippe.waroquiers@skynet.be>
Date: Mon Jun 10 21:41:51 2019 +0200
Ensure GDB printf command can print convenience var strings without a target.
GDB was extended in order to allow the printing of convenience
variables that are strings without a target. However, this introduced
a regression that hasn't been caught by our testsuite (because there
were no tests for it).
The problem happens when we try to print a convenience variable that
holds the address of a string in the inferior. The following
two-liners can reproduce the issue:
$ echo -e 'int main(){const char a[]="test";return 0;}' | gcc -x c - -O0-g3
$ ./gdb/gdb --data-directory ./gdb/data-directory -q ./a.out -ex 'start' -ex 'set $x = (const char *) (&a[0] + 2)' -ex 'printf "%s\n", $x'
After some investigation, I found that the problem happens on
printcmd.c:printf_c_string. In the case above, we're taking the first
branch of the 'if' condition, which assumes that there will be a value
to be printed at "value_contents (value)". There isn't. We actually
need to obtain the address that the variable points to, and read the
contents from memory.
It seems to me that we should avoid this branch if the TYPE_CODE of
"value_type (value)" is TYPE_CODE_PTR (i.e., a pointer to the
inferior's memory). This is what this patch does.
I took the liberty to extend the current testcase under
gdb.base/printcmds.exp and create a test that exercises this scenario.
No regressions have been found on Buildbot.
gdb/ChangeLog:
2020-03-03 Sergio Durigan Junior <sergiodj@redhat.com>
* printcmd.c (print_c_string): Check also for TYPE_CODE_PTR
when verifying if dealing with a convenience variable.
gdb/testsuite/ChangeLog:
2020-03-03 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.base/printcmds.exp: Add test to verify printf of a
variable holding an address.
I noticed GDB didn't know a particular AT tag (51) when doing some debugging.
Turns out we're missing a few entries compared to glibc's headers.
This patch adds them to GDB and fixes a failure in gdb.base/auxv.exp as
a result.
gdb/ChangeLog:
2020-03-03 Luis Machado <luis.machado@linaro.org>
* auxv.c (default_print_auxv_entry): Add new AUXV entries.
This function returns the result of a quite big condition. I think it
would be more readeable if it was broken up in smaller pieces and
commented. This is what this patch does.
I also introduced gdbarch_supports_displaced_stepping, since it shows
the intent better than checking for gdbarch_displaced_step_copy_insn_p.
I also used that new function in displaced_step_prepare_throw.
I also updated the comment on top of can_use_displaced_stepping, which
seemed a bit outdated with respect to non-stop. The comment likely
dates from before it was possible to have targets that always operate
non-stop under the hood, even when the user-visible mode is all-stop.
No functional changes intended.
gdb/ChangeLog:
* infrun.c (gdbarch_supports_displaced_stepping): New.
(use_displaced_stepping): Break up conditions in smaller pieces.
Use gdbarch_supports_displaced_stepping.
(displaced_step_prepare_throw): Use
gdbarch_supports_displaced_stepping.
This commit aims to give a cleaner mechanism by which the user can
prevent GDB from trying to load any previous command history.
Currently the user can change the path to the history file, either
using a command line flag, or by setting the GDBHISTFILE environment
variable, and if the path is set to a non-existent file, then
obviously GDB wont load any command history. However, this feels like
a bit of a bodge, I'd like to add an official mechanism by which we
can disable command history loading.
Why would we want to prevent command history loading? The specific
use case I have is GDB starting with a CWD that is a network mounted
directory, and there is no command history present. Still GDB will
access the network in order to check for the file. In my particular
use case I'm actually starting a large number of GDB instances in
parallel, all in the same network mounted directory, the large number
of network accesses looking for this file introduces a noticeable
delay at GDB startup.
The approach I'm proposing here is a slight adjustment to the current
rules for setting up the history filename. Currently, if a user does
this, they see an error:
(gdb) set history filename
Argument required (filename to set it to.).
However, if a user does this:
$ GDBHISTFILE= gdb --quiet
(gdb) set history save on
(gdb) q
warning: Could not rename -gdb18416~ to : No such file or directory
So, we already have a bug in this area. My plan is to allow the empty
filename to be accepted, and for this to mean, neither load, nor save
the command history.
This does mean that we now have two mechanisms to prevent saving the
command history:
(gdb) set history filename
or
(gdb) set history save off
But the only way to prevent loading the command history is to set the
filename to the empty string _before_ you get to a GDB prompt, either
using a command line option, or the environment variable.
I've updated some of the show commands, for example this session:
(gdb) set history filename
(gdb) show history filename
There is no filename currently set for recording the command history in.
(gdb) show history save
Saving of the history record on exit is off.
(gdb) set history save on
(gdb) show history save
Saving of the history is disabled due to the value of 'history filename'.
(gdb) set history filename /tmp/hist
(gdb) show history save
Saving of the history record on exit is on.
I've updated the manual, and added some tests.
gdb/ChangeLog:
* NEWS: Mention new behaviour of the history filename.
* top.c (write_history_p): Add comment.
(show_write_history_p): Add header comment, give a different
message when history writing is on, but the history filename is
empty.
(history_filename): Add comment.
(history_filename_empty): New function.
(show_history_filename): Add header comment, give a different
message when the filename is empty.
(init_history): Compare history_filename against nullptr, and only
read history if the filename is not empty.
(set_history_filename): Add header comment, and only make
non-empty filenames absolute.
(init_main): Make the filename argument to 'set history filename'
optional.
gdb/doc/ChangeLog:
* gdb.texinfo (Command History): Extend description for
GDBHISTFILE and GDBHISTSIZE, add detail about the filename for
'set history filename' being optional. Describe the effect of an
empty history filename on 'set history save on'.
gdb/testsuite/ChangeLog:
* gdb.base/default.exp: Remove test of 'set history filename'.
* gdb.base/gdbinit-history.exp: Add tests for setting the history
filename to the empty string.
* lib/gdb.exp (gdb_init): Unset environment variables GDBHISTFILE
and GDBHISTSIZE.
Change-Id: Ia586e4311182fac99113b60f11ef8a11fbd5450b
The floating point register interface has changed to this:
https://github.com/NetBSD/src/blob/trunk/sys/arch/arm/include/reg.h
It now uses VFP instead of FPA registers. This patch updates
arm-nbsd-nat.c accordingly.
Also implements read_description so that these registers are correctly
printed by "info registers" et al.
Tested by compiling & running on arm-netbsd on qemu.
gdb/ChangeLog:
2020-03-02 Christian Biesinger <cbiesinger@google.com>
* arm-nbsd-nat.c (arm_supply_fparegset): Rename to...
(arm_supply_vfpregset): ...this, and update to use VFP registers.
(fetch_fp_register): Update.
(fetch_fp_regs): Update.
(store_fp_register): Update.
(store_fp_regs): Update.
(arm_netbsd_nat_target::read_description): New function.
(fetch_elfcore_registers): Update.
With this commit:
commit 5b6d1e4fa4
Date: Fri Jan 10 20:06:08 2020 +0000
Multi-target support
There was a regression in GDB's support for older aspects of the
remote protocol. Specifically, when a target sends the 'S' stop reply
packet (which doesn't include a thread-id) then GDB has to figure out
which thread actually stopped.
Before the above commit GDB figured this out by using inferior_ptid in
process_stop_reply, which contained the ptid of the current
process/thread. This would be fine for single threaded
targets (which is the only place using an S packet makes sense), but
in the general case, relying on inferior_ptid for processing a stop is
wrong - there's no reason to believe that what was GDB's current
thread will be the same thread that just stopped in the target.
With the above commit the inferior_ptid now has the value null_ptid
inside process_stop_reply, this can be seen in do_target_wait, where
we call switch_to_inferior_no_thread before calling do_target_wait_1.
The problem this causes can be seen in the new test that runs
gdbserver using the flag --disable-packet=T, and causes GDB to throw
this assertion:
inferior.c:279: internal-error: inferior* find_inferior_pid(process_stratum_target*, int): Assertion `pid != 0' failed.
A similar problem was fixed in this commit:
commit 3cada74087
Date: Thu Jan 11 00:23:04 2018 +0000
Fix backwards compatibility with old GDBservers (PR remote/22597)
However, this commit deals with the case where the T packet doesn't
include a thread-id, not the S packet case. This commit solves the
problem providing a thread-id at the GDB side if the remote target
doesn't provide one. The thread-id provided comes from
remote_state::general_thread, however, though this does work, I don't
think it is the ideal solution.
The remote_state tracks two threads, the continue_thread and the
general_thread, these are updated when GDB asks the remote target to
switch threads. The general_thread is set before performing things
like register or memory accesses, and the continue_thread is set
before things like continue or step commands. Further, the
general_thread is updated after a target stops to reference the thread
that stopped.
The first thing to note from the above description is that we have a
cycle of dependency, when a T packet arrives without a thread-id we
fill in the thread-id from the general_thread data. The thread-id
from the stop event is then used to set the general_thread. This in
itself feels a little weird.
The second question is why use the general_thread at all? You'd think
given how they are originally set that the continue thread would be a
better choice. The problem with this is that the continue_thread, if
the user just does "continue", will be set to the minus_one_ptid, in
the remote protocol this means all threads. When the stop arrives
with no thread-id and we use continue_thread we end up with a very
similar assertion to before because we now end up trying to lookup a
thread using the minus_one_ptid. By contrast, once GDB has connected
to a remote target the general_thread will be set to a valid
thread-id, after which, if the target is single threaded, and stop
events arrive without a thread-id, everything works fine.
There is one slight weirdness with the above behaviour though. When
GDB first connects to the remote target inferior_ptid is null_ptid,
however, upon connecting we query the remote for its threads. As the
thread information arrives GDB adds the threads to its internal
database, and this process involves setting inferior_ptid to the id of
each new thread in turn. Once we know about all the threads we wait
for a stop event from the remote target to indicate that GDB is now in
control of the target.
The problem is that after adding the new threads we don't reset
inferior_ptid, and the code path we use to wait for a stop event from
the target also doesn't reset inferior_ptid, so it turns out that
during the initial connection inferior_ptid is not null_ptid. This is
lucky, because during the initial connection the general_thread
variable _is_ set to null_ptid.
So, during the initial connection, if the first stop event is missing
a thread-id then we "provide" a thead-id from general_thread. This
turns out to be null_ptid meaning no thread-id is known, and then
during process_stop_reply we fill in the missing thread-id using
inferior_ptid.
This was all discussed on the mailing list here:
https://sourceware.org/ml/gdb-patches/2020-02/msg01011.html
My proposal for a fix then is:
1. Move the call to switch_to_inferior_no_thread into
do_target_wait_1, this means that in all cases where we are waiting
for an inferior the inferior_ptid will be set to null_ptid. This is
good as no wait code should rely on inferior_ptid.
2. Remove the use of general_thread from the 'T' packet processing.
The general_thread read here was only ever correct by chance, and we
shouldn't be using it this way.
3. Remove use of inferior_ptid from process_stop_event as this is
wrong, and will always be null_ptid now anyway.
4. When a stop_event has null_ptid due to a lack of thread-id (either
from a T packet or an S packet) then pick the first non exited thread
in the target and use that. This will be fine for single threaded
targets. A multi-thread or multi-inferior aware remote target
should be using T packets with a thread-id, so we give a warning if
the target is multi-threaded, and we are still missing a thread-id.
5. Extend the existing test that covered the T packet with missing
thread-id to also cover the S packet.
gdb/ChangeLog:
* remote.c (remote_target::remote_parse_stop_reply): Don't use the
general_thread if the stop reply is missing a thread-id.
(remote_target::process_stop_reply): Use the first non-exited
thread if the target didn't pass a thread-id.
* infrun.c (do_target_wait): Move call to
switch_to_inferior_no_thread to ....
(do_target_wait_1): ... here.
gdb/testsuite/ChangeLog:
* gdb.server/stop-reply-no-thread.exp: Add test where T packet is
disabled.
* defs.h includes config.h
* config.h may define _GNU_SOURCE
* if _GNU_SOURCE is defined, that must be before including any system
header (see feature_test_macro(7))
This is necessary to ensure that a prototype for mkostemp() is brought
into scope by <stdlib.h> when compiling filestuff.h, on platforms where
_GNU_SOURCE isn't unconditionally defined for C++.
In file included from ../../gdb/../gdbsupport/scoped_fd.h:24,
from ../../gdb/debuginfod-support.c:22:
../../gdb/../gdbsupport/filestuff.h: In function ‘int gdb_mkostemp_cloexec(char*, int)’:
../../gdb/../gdbsupport/filestuff.h:59:10: error: ‘mkostemp’ was not declared in this scope; did you mean ‘mkstemp’?
gdb/ChangeLog:
2020-02-29 Jon Turney <jon.turney@dronecode.org.uk>
* debuginfod-support.c: Include defs.h first.
When language is set to auto, part of loading an executable is to update the
language accordingly. This is implemented by set_initial_language.
In case of a c++ executable without DW_AT_main_subprogram,
set_initial_language finds "main" in the minimal symbols, and does a lookup of
"main" in the symbol tables to determine the language of the symbol, and uses
that as initial language.
The symbol lookup is done using lookup_symbol which is a wrapper around
lookup_symbol_in_language, using the current language.
So, consider two c++ executables a.out and b.out, which we'll load one after
another. If we track the resulting lookup_symbol_in_language calls:
...
$ gdb -batch \
-ex "b lookup_symbol_in_language" \
-ex r -ex c -ex c \
--args gdb
...
we find that indeed lookup_symbol_in_language is called once using language_c, and
once using language_c_plus:
...
(gdb) file a.out
Reading symbols from a.out...
Breakpoint 1, lookup_symbol_in_language (name=0x5555568c2050 "main", \
block=0x0, domain=VAR_DOMAIN, lang=language_c, is_a_field_of_this=0x0) \
at ../../gdb/symtab.c:1905
1905 {
(gdb) file b.out
Load new symbol table from "b.out"? (y or n) y
Reading symbols from b.out...
Breakpoint 1, lookup_symbol_in_language (name=0x5555568c2030 "main", \
block=0x0, domain=VAR_DOMAIN, lang=language_cplus, is_a_field_of_this=0x0) \
at ../../gdb/symtab.c:1905
1905 {
(gdb)
...
It seems like a bad idea to have the previous language play a role
in determining the executable language.
Fix this by using lookup_symbol_in_language in set_initial_language with the
default language c as argument.
Tested on x86_64-linux.
gdb/ChangeLog:
2020-02-28 Tom de Vries <tdevries@suse.de>
* symfile.c (set_initial_language): Use default language for lookup.
Running anything with the fission.exp board fails since commit
c0ab21c22b ("Replace init_cutu_and_read_dies with a class").
GDB crashes while reading the DWARF info. cu is NULL in
read_signatured_type:
Thread 1 "gdb" received signal SIGSEGV, Segmentation fault.
0x000055555780663e in read_signatured_type
sig_type=0x6210000c3600) at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:22782
22782 gdb_assert (cu->die_hash == NULL);
(top-gdb) bt
#0 0x000055555780663e in read_signatured_type (sig_type=0x6210000c3600) at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:22782
#1 0x00005555578062dd in load_full_type_unit (per_cu=0x6210000c3600) at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:22758
#2 0x00005555577c5fb7 in queue_and_load_dwo_tu (slot=0x60600007fc00, info=0x6210000c34e0) at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:12674
#3 0x0000555559934232 in htab_traverse_noresize (htab=0x60b000063670, callback=0x5555577c5e61 <queue_and_load_dwo_tu(void**, void*)>, info=0x6210000c34e0)
at /home/simark/src/binutils-gdb/libiberty/hashtab.c:775
#4 0x00005555577c6252 in queue_and_load_all_dwo_tus (per_cu=0x6210000c34e0) at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:12701
#5 0x000055555777ebd8 in dw2_do_instantiate_symtab (per_cu=0x6210000c34e0, skip_partial=false) at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:2371
#6 0x000055555777eea2 in dw2_instantiate_symtab (per_cu=0x6210000c34e0, skip_partial=false) at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:2395
#7 0x0000555557786ab6 in dw2_lookup_symbol (objfile=0x614000007240, block_index=GLOBAL_BLOCK, name=0x602000025310 "main", domain=VAR_DOMAIN)
at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:3539
After creating the reader object, the reader.cu field should not be
NULL. By checking the commit previous to the faulty one mentioned
above, I noticed that the cu field is normally set by
init_cu_die_reader, called from read_cutu_die_from_dwo, itself called
from cutu_reader::init_tu_and_read_dwo_dies, itself called from
cutu_reader's constructor.
However, cutu_reader::init_tu_and_read_dwo_dies calls
read_cutu_die_from_dwo, passing a pointer to a local `die_reader_specs`
variable. So it's the `cu` field of that object that gets set.
cutu_reader itself is a `die_reader_specs` (it inherits from it), and
the intention was most likely to pass `this` to read_cutu_die_from_dwo.
This way, the fields of the cutu_reader object, which
read_signatured_type will use, are set.
With this, I am able to use:
make check RUNTESTFLAGS='--target_board=fission'
and it looks much better. There are still some failures to be
investigated, but that's the usual state of the testsuite.
gdb/ChangeLog:
* dwarf2/read.c (cutu_reader::init_tu_and_read_dwo_dies): Remove
reader variable, pass `this` to read_cutu_die_from_dwo.
This fixes a regression caused by commit 0d79cdc494d5:
$ make check TESTS="gdb.dwarf2/dw2-ranges-base.exp"
[...]
ERROR: GDB process no longer exists
This error is caused by an abort during the computation of srcpath
when SYMTAB_DIRNAME (s) == NULL.
Computing srcpath only when SYMTAB_DIRNAME (s) is not NULL fixes this
error. Also change the condition for calling debuginfod_source_query
to include whether srcpath could be computed.
gdb/ChangeLog:
2020-02-27 Aaron Merey <amerey@redhat.com>
* source.c (open_source_file): Check for nullptr when computing
srcpath.
I noticed that there's no real reason to have field_info::nfields in
the DWARF reader. It simply mirrors information that is already
available. This patch removes it, in favor of a convenience method.
gdb/ChangeLog
2020-02-27 Tom Tromey <tromey@adacore.com>
* dwarf2/read.c (struct field_info) <nfields>: Now a method, not a
member.
(dwarf2_add_field): Don't update nfields.
(dwarf2_attach_fields_to_type, process_structure_scope): Update.
Use std::abs so that we get the C++ overloaded version that matches
the argument type instead of the C abs function which is only for int
arguments.
There should be no user visible change after this commit.
gdb/ChangeLog:
* gdbtypes.c (create_array_type_with_stride): Use std::abs not
abs.
Include files are represented by a partial symtab, but don't expand to
anything. From dwarf2_psymtab::expand_psymtab:
if (per_cu == NULL)
{
/* It's an include file, no symbols to read for it.
Everything is in the parent symtab. */
readin = true;
return;
}
This patch introduces a new specialization of partial_symtab to handle
this case. In addition to being slightly smaller, I believe an
include file is the only situation where a DWARF psymtab can result in
a null compunit_symtab. This adds an assert to that effect as well.
This change will simplify one of the psymtab sharing patches.
gdb/ChangeLog
2020-02-26 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (struct dwarf2_include_psymtab): New.
(dwarf2_create_include_psymtab): Use dwarf2_include_psymtab.
(dwarf2_psymtab::expand_psymtab, dwarf2_psymtab::readin_p)
(dwarf2_psymtab::get_compunit_symtab): Remove null checks for
per_cu_data.
dwarf2/index-write.c casts pointers to "dwarf2_psymtab *", but as far
as I can tell, it does not actually use any DWARF-specific fields of
the psymtab. So, this patch changes this code to use partial_symtab
instead. This removes nearly every cast, leaving just the unavoidable
one from addrmap iteration.
gdb/ChangeLog
2020-02-26 Tom Tromey <tom@tromey.com>
* dwarf2/index-write.c (psym_index_map): Change type.
(add_address_entry_worker, write_one_signatured_type)
(recursively_count_psymbols, recursively_write_psymbols)
(class debug_names, psyms_seen_size, write_gdbindex)
(write_debug_names): Use partial_symtab, not dwarf2_psymtab.
debuginfod is a lightweight web service that indexes ELF/DWARF debugging
resources by build-id and serves them over HTTP.
This patch enables GDB to query debuginfod servers for separate debug
files and source code when it is otherwise not able to find them.
GDB can be built with debuginfod using the --with-debuginfod configure
option.
This requires that libdebuginfod be installed and found at configure time.
debuginfod is packaged with elfutils, starting with version 0.178.
For more information see https://sourceware.org/elfutils/.
Tested on x86_64 Fedora 31.
gdb/ChangeLog:
2020-02-26 Aaron Merey <amerey@redhat.com>
* Makefile.in: Handle optional debuginfod support.
* NEWS: Update.
* README: Add --with-debuginfod summary.
* config.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle optional debuginfod support.
* debuginfod-support.c: debuginfod helper functions.
* debuginfod-support.h: Ditto.
* doc/gdb.texinfo: Add --with-debuginfod to configure options
summary.
* dwarf2/read.c (dwarf2_get_dwz_file): Query debuginfod servers
when a dwz file cannot be found.
* elfread.c (elf_symfile_read): Query debuginfod servers when a
debuginfo file cannot be found.
* source.c (open_source_file): Query debuginfod servers when a
source file cannot be found.
* top.c (print_gdb_configuration): Include
--{with,without}-debuginfod in the output.
gdb/testsuite/ChangeLog:
2020-02-26 Aaron Merey <amerey@redhat.com>
* gdb.debuginfod: New directory for debuginfod tests.
* gdb.debuginfod/main.c: New test file.
* gdb.debuginfod/fetch_src_and_symbols.exp: New tests.
This makes the thread apply command print the thread's name. The use
of target_pid_to_str is replaced by thread_target_id_str, which
provides the same output as "info threads".
Before:
(gdb) thread apply 2 bt
Thread 2 (Thread 0x7fd245602700 (LWP 3837)):
[...]
After:
(gdb) thread apply 2 bt
Thread 2 (Thread 0x7fd245602700 (LWP 3837) "HT cleanup"):
[...]
The thread's description header is pre-computed before running the
command since the command may change the selected inferior. This is
not permitted by thread_target_id_str as target_thread_name asserts
that `info->inf == current_inferior ()`.
This situation arises in the `gdb.threads/threadapply.exp` test which
kills and removes the inferior as part of a "thread apply" command.
gdb/ChangeLog:
* thread.c (thr_try_catch_cmd): Print thread name.
All these functions have their implementations in dwarf2/read.c, so move
their declarations to dwarf2/read.h. Move the doc to the header, at the
same time.
gdb/ChangeLog:
* dwarf2/loc.h (dwarf2_fetch_die_loc_sect_off,
dwarf2_fetch_die_loc_cu_off, dwarf2_fetch_constant_bytes,
dwarf2_fetch_die_type_sect_off): Move to...
* dwarf2/read.h (dwarf2_fetch_die_loc_sect_off,
dwarf2_fetch_die_loc_cu_off, dwarf2_fetch_constant_bytes,
dwarf2_fetch_die_type_sect_off): ... here.
* dwarf2/read.c (dwarf2_fetch_die_loc_sect_off,
dwarf2_fetch_die_loc_cu_off, dwarf2_fetch_constant_bytes,
dwarf2_fetch_die_type_sect_off): Move doc to header file.
Initially, gdb sets the language to auto/c:
...
$ gdb -q
(gdb) show language
The current source language is "auto; currently c".
...
And after loading a c++ executable, that changes to auto/c++:
...
(gdb) file a.out
Reading symbols from a.out...
(gdb) show language
The current source language is "auto; currently c++".
...
Now consider setting the language manually to c:
...
$ gdb -q
(gdb) show language
The current source language is "auto; currently c".
(gdb) set language c
(gdb) show language
The current source language is "c".
...
The resulting language is manual/c.
Surprisingly, a subsequent load of the c++ executable:
...
(gdb) file a.out
Reading symbols from a.out...
(gdb) show language
The current source language is "c++".
...
gets us language manual/c++.
Loading the file should get us either:
- auto/c++, or
- manual/c.
That is, either the manual setting should be reset by loading, or the manual
setting should persist.
Fix this in the manual/c fashion. [ Though we could make some gdb setting to
choose one or the other. ]
Build and reg-tested on x86_64-linux.
[ Note: In PR23710 comment 1 a cc1 binary is attached for which gdb is slow when
loading and settting a breakpoint on do_rpo_vn:
...
$ time.sh gdb cc1 -batch -ex "b do_rpo_vn"
Breakpoint 1 at 0xd40e30: do_rpo_vn. (2 locations)
maxmem: 1463496
real: 8.88
user: 8.59
system: 0.35
...
This fix enables a speedup by manually setting the language before
loading, reducing executing time with ~17%, due to not having to load the full
symtab containing main:
...
$ time.sh gdb -iex "set language c++" cc1 -batch -ex "b do_rpo_vn"
Breakpoint 1 at 0xd40e30: do_rpo_vn. (2 locations)
maxmem: 1067308
real: 7.36
user: 7.14
system: 0.28
... ]
gdb/ChangeLog:
2020-02-26 Tom de Vries <tdevries@suse.de>
PR gdb/25603
* symfile.c (set_initial_language): Exit-early if
language_mode == language_mode_manual.
gdb/testsuite/ChangeLog:
2020-02-26 Tom de Vries <tdevries@suse.de>
PR gdb/25603
* gdb.base/persistent-lang.cc: New test.
* gdb.base/persistent-lang.exp: New file.
The implementation is in dwarf2/read.c, so the declaration belongs in
dwarf2/read.h. Also, move the documentation there.
gdb/ChangeLog:
* dwarf2/loc.h (dwarf2_read_addr_index): Move...
* dwarf2/read.h (dwarf2_read_addr_index): ... here.
* dwarf2/read.c (dwarf2_read_addr_index): Move doc to header.
This commit adds support for negative Fortran array strides in one
limited case, that is the case of a single element array with a
negative array stride.
The changes in this commit will be required in order for more general
negative array stride support to work correctly, however, right now
other problems in GDB prevent negative array strides from working in
the general case.
The reason negative array strides don't currently work in the general
case is that when dealing with such arrays, the base address for the
objects data is actually the highest addressed element, subsequent
elements are then accessed with a negative offset from that address,
and GDB is not currently happy with this configuration.
The changes here can be summarised as, stop treating signed values as
unsigned, specifically, the array stride, and offsets calculated using
the array stride.
This issue was identified on the mailing list by Sergio:
https://sourceware.org/ml/gdb-patches/2020-01/msg00360.html
The test for this issue is a new one written by me as the copyright
status of the original test is currently unknown.
gdb/ChangeLog:
* gdbtypes.c (create_array_type_with_stride): Handle negative
array strides.
* valarith.c (value_subscripted_rvalue): Likewise.
gdb/testsuite/ChangeLog:
* gdb.fortran/derived-type-striding.exp: Add a new test.
* gdb.fortran/derived-type-striding.f90: Add pointer variable for
new test.
Just a trivial typo fix in a comment.
gdb/ChangeLog
2020-02-25 Luis Machado <luis.machado@linaro.org>
* aarch64-tdep.c (aarch64_vnv_type): Fix comment typo.
Since its implementation is in dwarf2/read.c, its declaration belongs in
dwarf2/read.h. Move the documentation to the .h at the same time.
gdb/ChangeLog:
* loc.h (dwarf2_get_die_type): Move to...
* read.h (dwarf2_get_die_type): ... here.
* read.c (dwarf2_get_die_type): Move doc to header.
This will prevent this script from updating the copyright year range
for those files.
Note that aclocal.m4 and configure are already in the EXCLUDE_ALL_LIST,
so they don't need to be added to the EXCLUDE_LIST.
gdb/ChangeLog:
* copypright.py (EXCLUDE_LIST): Add 'gnulib/config.in' and
'gnulib/Makefile.in' to the list.
I noticed that setup_type_unit_groups leaks the symtab vector -- it
allocates this with XNEWVEC, but from what I can tell, nothing frees
it. This patch changes it to use XOBNEWVEC.
Also, the type_unit_unshareable::num_symtabs member is assigned but
never read. So, this removes it.
gdb/ChangeLog
2020-02-24 Tom Tromey <tom@tromey.com>
* dwarf2/read.h (struct type_unit_unshareable) <num_symtabs>:
Remove.
* dwarf2/read.c (dwarf2_cu::setup_type_unit_groups): Use
XOBNEWVEC.
This converts the IS_TYPE_UNIT_GROUP to a method on
dwarf2_per_cu_data.
gdb/ChangeLog
2020-02-24 Tom Tromey <tom@tromey.com>
* dwarf2/read.h (struct dwarf2_per_cu_data) <type_unit_group_p>:
New method.
* dwarf2/read.c (IS_TYPE_UNIT_GROUP): Remove.
(dw2_do_instantiate_symtab, dw2_get_file_names)
(build_type_psymtab_dependencies, load_full_type_unit): Update.
This simplifies the setting and clearing of reading_partial_symbols,
by using scoped_restore in the function that reads partial symbols.
gdb/ChangeLog
2020-02-24 Tom Tromey <tom@tromey.com>
* dwarf2read.c (dwarf2_build_psymtabs_hard): Use
make_scoped_restore.
(dwarf2_psymtab::read_symtab): Don't clear
reading_partial_symbols.
Consider a test-case compiled with -g:
...
int main (void) {
static int b = 2;
return 0;
}
...
When running info locals in main, we get:
...
(gdb) info locals
No locals.
...
The info locals documentation states:
...
Print the local variables of the selected frame, each on a separate line.
These are all variables (declared either static or automatic) accessible at
the point of execution of the selected frame.
...
So, "info locals" should have printed static variable b.
The variable is present in dwarf info:
...
<2><14a>: Abbrev Number: 6 (DW_TAG_variable)
<14b> DW_AT_name : b
<153> DW_AT_const_value : 2
...
but instead of a location attribute, it has a const_value attribute, which
causes the corresponding symbol to have LOC_CONST, which causes info locals to
skip it.
Fix this by handling LOC_CONST in iterate_over_block_locals.
Build and reg-tested on x86_64-linux.
gdb/ChangeLog:
2020-02-24 Tom de Vries <tdevries@suse.de>
PR gdb/25592
* stack.c (iterate_over_block_locals): Handle LOC_CONST.
gdb/testsuite/ChangeLog:
2020-02-24 Tom de Vries <tdevries@suse.de>
PR gdb/25592
* gdb.base/info-locals-unused-static-var.c: New test.
* gdb.base/info-locals-unused-static-var.exp: New file.
With test-case gdb.gdb/unittest.exp, I run into:
...
(gdb) maintenance selftest^M
...
Running selftest help_doc_invariants.^M
help doc broken invariant: command 'layout next' help doc first line is \
not terminated with a '.' character^M
help doc broken invariant: command 'layout prev' help doc first line is \
not terminated with a '.' character^M
help doc broken invariant: command 'layout regs' help doc first line is \
not terminated with a '.' character^M
Self test failed: self-test failed at help-doc-selftests.c:95^M
...
Fix this by adding the missing '.' character.
Build and reg-tested on x86_64-linux.
gdb/ChangeLog:
2020-02-24 Tom de Vries <tdevries@suse.de>
* tui/tui-layout.c (_initialize_tui_layout): Fix help messages for
commands layout next/prev/regs.
I noticed that dwarf2_compile_expr_to_ax can be static. Nothing
outside of loc.c calls it.
gdb/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
* dwarf2/loc.h (dwarf2_compile_expr_to_ax): Don't declare.
* dwarf2/loc.c (dwarf2_compile_expr_to_ax): Now static.
I noticed that the TUI_DISASM_WIN macro cast the disassembly window to
a base type, rather than its correct type. This patch fixes this
oversight.
2020-02-22 Tom Tromey <tom@tromey.com>
* tui/tui-data.h (TUI_DISASM_WIN): Cast to tui_disasm_window.
Change-Id: Ied3dbac9ef3dc48ceb9e0850fe4ada3c316dd769
This adds "usage" text to the help for all all the TUI commands. In
some cases the usage is borderline, but I tend to think being complete
is preferable.
2020-02-22 Tom Tromey <tom@tromey.com>
* tui/tui-win.c (_initialize_tui_win): Add usage text.
* tui/tui-stack.c (_initialize_tui_stack): Add usage text.
* tui/tui-regs.c (_initialize_tui_regs): Add usage text.
* tui/tui.c (_initialize_tui): Add usage text.
Change-Id: I727f7a7cfc03efa248ef98f30a18be393819e30b
This changes a couple of TUI commands to use error_no_arg. The
commands are also simplified a bit, and changed to use other gdb CLI
utility functions like skip_to_space. This lets us removes a couple
of defines that don't interact properly with gettext.
2020-02-22 Tom Tromey <tom@tromey.com>
* tui/tui-win.c (tui_set_focus_command)
(tui_set_win_height_command): Use error_no_arg.
(_initialize_tui_win): Update help text.
(FOCUS_USAGE, WIN_HEIGHT_USAGE): Don't define.
Change-Id: I2bf95c2e5cfe1472d068388fa39f0cf07591b76c
This patch adds support for writing new TUI windows in Python.
2020-02-22 Tom Tromey <tom@tromey.com>
* NEWS: Add entry for gdb.register_window_type.
* tui/tui-layout.h (window_factory): New typedef.
(tui_register_window): Declare.
* tui/tui-layout.c (saved_tui_windows): New global.
(tui_apply_current_layout): Use it.
(tui_register_window): New function.
* python/python.c (do_start_initialization): Call
gdbpy_initialize_tui.
(python_GdbMethods): Add "register_window_type" function.
* python/python-internal.h (gdbpy_register_tui_window)
(gdbpy_initialize_tui): Declare.
* python/py-tui.c: New file.
* Makefile.in (SUBDIR_PYTHON_SRCS): Add py-tui.c.
gdb/doc/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
* python.texi (Python API): Add menu item.
(TUI Windows In Python): New node.
gdb/testsuite/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
* gdb.python/tui-window.exp: New file.
* gdb.python/tui-window.py: New file.
Change-Id: I85fbfb923a1840450a00a7dce113a05d7f048baa
do_tui_putc has some code to remove annotations from gdb output. This
was added in 2001, see commit a198b876bb.
However, I think this code is not needed. It seems very unlikely to
enable both annotations and the TUI, and in any case I think this is
something that should not be supported.
So, this patch removes this code.
gdb/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
* tui/tui-io.c (do_tui_putc): Don't omit annotations.
Change-Id: I05728110365a362d37c9821df9c8779316100bb8
I noticed that the TUI had two functions with similar names:
tui_set_win_focus_to and tui_set_win_with_focus.
However, one was just an implementation detail of the latter. So,
this patch removes tui_set_win_with_focus entirely, to avoid any
temptation to call it.
gdb/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
* tui/tui-win.c (tui_set_win_focus_to): Move to tui-data.c.
* tui/tui-data.h (tui_set_win_with_focus): Don't declare.
* tui/tui-data.c (tui_set_win_with_focus): Remove.
(tui_set_win_focus_to): Move from tui-win.c.
Change-Id: Idffddab773436bdf80d55480906d76b292981ef2
This adds a new global that maps from window names to window
constructor functions, and then changes tui_get_window_by_name and
validate_window_name to use it. This is another step toward
user-defined window types.
gdb/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
* tui/tui-layout.c (make_standard_window, get_locator_window): New
functions.
(known_window_types): New global.
(tui_get_window_by_name): Reimplement.
(initialize_known_windows): New function.
(validate_window_name): Rewrite.
(_initialize_tui_layout): Call initialize_known_windows.
Change-Id: I9037aac550299b9d945899220a30c2d3af9dd0de
TUI windows no longer need to store their type -- there's only a
single spot that uses this information, and it can be changed to use
dynamic_cast. (It could be cleaned up even more, by using a virtual
method, but I haven't done so.) This patch removes the "type" field
from tui_gen_win_info, and this in turn allows removing a couple of
enumerator constants.
gdb/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
* tui/tui.h (enum tui_win_type) <LOCATOR_WIN, DATA_ITEM_WIN>:
Remove constants.
* tui/tui-winsource.h (struct tui_source_window_base)
<tui_source_window_base>: Remove parameter.
* tui/tui-winsource.c
(tui_source_window_base::tui_source_window_base): Remove
parameter.
(tui_source_window_base::refill): Update.
* tui/tui-stack.h (struct tui_locator_window)
<tui_locator_window>: Update.
* tui/tui-source.h (struct tui_source_window) <tui_source_window>:
Default the constructor.
* tui/tui-regs.h (struct tui_data_item_window)
<tui_data_item_window>: Default the constructor.
(struct tui_data_window) <tui_data_window>: Likewise.
* tui/tui-disasm.h (struct tui_disasm_window) <tui_disasm_window>:
Default the constructor.
* tui/tui-data.h (struct tui_gen_win_info) <tui_gen_win_info>:
Default the constructor.
<type>: Remove.
(struct tui_win_info) <tui_win_info>: Default the constructor.
* tui/tui-data.c (tui_win_info::tui_win_info): Remove.
* tui/tui-command.h (struct tui_cmd_window) <tui_cmd_window>:
Default the constructor.
Change-Id: I594cd07d2e0bba71ad594a6fb263904ce2febcd6
tui_delete_invisible_windows is only needed after applying a layout,
and tui_make_all_invisible is only needed before applying a layout.
This patch removes these functions, in favor of doing this management
directly in tui_apply_current_layout. This is needed so that the
lifetimes of non-built-in windows will be properly managed.
gdb/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
* tui/tui-wingeneral.h (tui_make_all_invisible): Don't declare.
* tui/tui-wingeneral.c (tui_make_all_invisible): Remove.
* tui/tui-win.c (tui_resize_all): Don't call
tui_delete_invisible_windows.
* tui/tui-layout.c (tui_apply_current_layout): Delete windows when
done.
(tui_set_layout): Update.
(tui_add_win_to_layout): Don't call tui_delete_invisible_windows.
* tui/tui-data.h (tui_delete_invisible_windows): Don't declare.
* tui/tui-data.c (tui_delete_invisible_windows): Remove.
Change-Id: Ia3603b021dcb7ec31700a4a32640cd09b00b8f3b
This changes tui_partial_win_by_name to correctly handle an ambiguous
name prefix. This will be important once the user can register new
window types.
gdb/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
* tui/tui-win.c (tui_partial_win_by_name): Handle ambiguity
correctly.
Change-Id: I59aaacd697eeab649164183457ef722dae58d60d
This reimplements tui_next_win and tui_prev_win. Now they account for
the possibility of windows not on tui_win_list.
gdb/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
* tui/tui-data.c (tui_next_win, tui_prev_win): Reimplement.
Change-Id: Ifcd402f76fe0a16e0fe9275a185d550279c01660
This changes the TUI to track all the instantiated windows in a new
global vector. After this, iteration over TUI windows is done by
simply iterating over this vector.
This approach makes it simpler to define new window types. In
particular, a subsequent patch will add the ability to define a TUI
window from Python.
Note that this series will not remove tui_win_list. This will
continue to exist in parallel, only because it was simpler to leave
this alone. Perhaps it could still be removed in the future.
gdb/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
* tui/tui-winsource.h (struct tui_source_window_iterator)
<inner_iterator>: New etytypedef.
<tui_source_window_iterator>: Take "end" parameter.
<tui_source_window_iterator>: Take iterator.
<operator*, advance>: Update.
<m_iter>: Change type.
<m_end>: New field.
(struct tui_source_windows) <begin, end>: Update.
* tui/tui-layout.c (tui_windows): New global.
(tui_apply_current_layout): Clear tui_windows.
(tui_layout_window::apply): Update tui_windows.
* tui/tui-data.h (tui_windows): Declare.
(all_tui_windows): Now inline function.
(class tui_window_iterator, struct all_tui_windows): Remove.
Change-Id: I6ab77976d6326f427178f725434f8f82046e0bbf
This changes the TUI layout engine to add horizontal splitting. Now,
windows can be side-by-side.
A horizontal split is defined using the "-horizontal" parameter to
"tui new-layout".
This also adds the first "winheight" test to the test suite. One open
question is whether we want a new "winwidth" command, now that
horizontal layouts are possible. This is easily done using the
generic layout code.
gdb/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
PR tui/17850:
* tui/tui-win.c (tui_gen_win_info::max_width): New method.
* tui/tui-layout.h (class tui_layout_base) <get_sizes>: Add
"height" argument.
(class tui_layout_window) <get_sizes>: Likewise.
(class tui_layout_split) <tui_layout_split>: Add "vertical"
argument.
<get_sizes>: Add "height" argument.
<m_vertical>: New field.
* tui/tui-layout.c (tui_layout_split::clone): Update.
(tui_layout_split::get_sizes): Add "height" argument.
(tui_layout_split::adjust_size, tui_layout_split::apply): Update.
(tui_new_layout_command): Parse "-horizontal".
(_initialize_tui_layout): Update help string.
(tui_layout_split::specification): Add "-horizontal" when needed.
* tui/tui-layout.c (tui_layout_window::get_sizes): Add "height"
argument.
* tui/tui-data.h (struct tui_gen_win_info) <max_width, min_width>:
New methods.
gdb/doc/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
PR tui/17850:
* gdb.texinfo (TUI Commands): Document horizontal layouts.
gdb/testsuite/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
PR tui/17850:
* gdb.tui/new-layout.exp: Add horizontal layout and winheight
tests.
Change-Id: I38b35e504f34698578af86686be03c0fefd954ae
This changes tui_layout_base::adjust_size to return a new enum type.
I broke this out into a separate patch because it simplifies a
subsequent patch.
gdb/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
* tui/tui-layout.h (enum tui_adjust_result): New.
(class tui_layout_base) <adjust_size>: Return tui_adjust_result.
(class tui_layout_window) <adjust_size>: Return
tui_adjust_result. Rewrite.
(class tui_layout_split) <adjust_size>: Return tui_adjust_result.
* tui/tui-layout.c (tui_layout_split::adjust_size): Update.
Change-Id: I821b48ab06a9b9485875e147bd08a3bc46b900a0
The new TUI layout engine has support for "sub-layouts" -- this is a
layout that includes another layout as a child. A sub-layout is
treated as a unit when allocating space.
There's not a very strong reason to use sub-layouts currently. This
patch exists to introduce the idea, and to simplify the subsequent
patch that adds horizontal layouts -- where sub-layouts are needed.
Because this patch won't go in on its own, I chose to defer
documenting this change until the subsequent horizontal layout patch.
gdb/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
* tui/tui-layout.h (class tui_layout_split) <add_split>: Change
parameter and return types.
(class tui_layout_base) <specification>: Add "depth".
(class tui_layout_window) <specification>: Add "depth".
(class tui_layout_split) <specification>: Add "depth".
* tui/tui-layout.c (tui_layout_split::add_split): Change parameter
and return types.
(tui_new_layout_command): Parse sub-layouts.
(_initialize_tui_layout): Update help string.
(tui_layout_window::specification): Add "depth".
(add_layout_command): Update.
gdb/testsuite/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
* gdb.tui/new-layout.exp: Add sub-layout tests.
Change-Id: Iddf52d067a552c168b8a67f29caf7ac86404b10c
This adds a new command, "tui new-layout". This command can be used
to define a new TUI window layout.
The command is used like:
(gdb) tui new-layout name src 1 regs 1 status 0 cmd 1
The first argument is the name of the layout. In this example, it is
"name", so the new layout could be seen by "layout name".
Subsequent arguments come in pairs, where the first item in a pair is
the name of a window, and the second item in a pair is the window's
weight. A weight is just an integer -- a window's allocated size is
proportional to the total of the weights given. So, in the above
example, all windows will have the same size (the status windows's
weight does not matter, because it has fixed height).
gdb/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
* NEWS: Add "tui new-layout" item.
* tui/tui-layout.c (add_layout_command): Return cmd_list_element.
Add new-layout command to help text.
(validate_window_name): New function.
(tui_new_layout_command): New function.
(_initialize_tui_layout): Register "new-layout".
(tui_layout_window::specification): New method.
(tui_layout_window::specification): New method.
* tui/tui-layout.h (class tui_layout_base) <specification>: New
method.
(class tui_layout_window) <specification>: New method.
(class tui_layout_split) <specification>: New method.
gdb/doc/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
* gdb.texinfo (TUI Overview): Mention user layouts.
(TUI Commands): Document "tui new-layout".
gdb/testsuite/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
* gdb.tui/new-layout.exp: New file.
Change-Id: Id7c3ace20ab1e8924f8f4ad788f40210f58a5c05
This changes the TUI so that the available layouts are no longer
completely hard-coded. "enum tui_layout_type" is removed, and then
all the fallout from this is fixed up.
This patch also reimplements the "layout" command to be a prefix
command. The concrete layouts are simply sub-commands now. This
provides completion and correct abbreviation behavior for free.
Finally, this also changes the name of the locator window to "status".
This matches the documentation and will be exposed to the user in a
subsequent patch.
gdb/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
* tui/tui.c (tui_enable): Call tui_set_initial_layout.
* tui/tui-win.c (window_name_completer): Update comment.
* tui/tui-layout.h (class tui_layout_base) <replace_window>:
Declare method.
(class tui_layout_window) <replace_window>: Likewise.
(class tui_layout_split) <replace_window>: Likewise.
(tui_set_layout): Don't declare.
(tui_set_initial_layout): Declare function.
* tui/tui-layout.c (layouts, applied_skeleton, src_regs_layout)
(asm_regs_layout): New globals.
(tui_current_layout, show_layout): Remove.
(tui_set_layout, tui_add_win_to_layout): Rewrite.
(find_layout, tui_apply_layout): New function.
(layout_completer): Remove.
(tui_next_layout): Reimplement.
(tui_next_layout_command): New function.
(tui_set_initial_layout, tui_prev_layout_command): New functions.
(tui_regs_layout): Reimplement.
(tui_regs_layout_command): New function.
(extract_display_start_addr): Rewrite.
(next_layout, prev_layout): Remove.
(tui_layout_window::replace_window): New method.
(tui_layout_split::replace_window): New method.
(destroy_layout): New function.
(layout_list): New global.
(add_layout_command): New function.
(initialize_layouts): Update.
(tui_layout_command): New function.
(_initialize_tui_layout): Install "layout" commands.
* tui/tui-data.h (enum tui_layout_type): Remove.
(tui_current_layout): Don't declare.
Change-Id: I9b5f7ab3ce838d6b340b8c373ef649a8e0a74b73
This reimplements the low-level layout function that is used by the
"tui reg" command. Now it simply calls into the existing "layout"
command, though this will be changed again in a subsequent patch. The
rationale for this patch is that it makes it simpler to remove
"enum tui_layout_type".
gdb/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
* tui/tui-regs.c (tui_reg_layout): Remove.
(tui_reg_command): Use tui_regs_layout.
* tui/tui-layout.h (tui_reg_command): Declare.
* tui/tui-layout.c (tui_reg_command): New function.
Change-Id: I0ca6884e2967005e7d3fbf5f13a0ac8f9c3298cf
The TUI "C-x 1" key binding removes TUI windows, based on the current
layout. With user-defined layouts, this is no longer easy to do.
This patch changes "C-x 1" to simply delete windows, leaving just the
focus window, the locator, and the command window.
gdb/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
* tui/tui.c (tui_rl_delete_other_windows): Call
tui_remove_some_windows.
* tui/tui-layout.h (class tui_layout_base) <remove_windows>:
Declare method.
(class tui_layout_window) <remove_windows>: New method.
(class tui_layout_split) <remove_windows>: Declare.
(tui_remove_some_windows): Declare.
* tui/tui-layout.c (tui_remove_some_windows): New function.
(tui_layout_split::remove_windows): New method.
Change-Id: If186f9c3f263913e963b965204481d1b4385c6d4
The TUI "C-x 2" binding tries to switch to a different layout based on
the current layout. Once user-defined layouts are available, this
won't really make sense. I wasn't entirely sure how to handle this.
This patch changes the binding to simply cycle through the existing
layouts. I considered this a reasonable, though not ideal,
compromise.
gdb/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
* tui/tui.c (tui_rl_change_windows): Call tui_next_layout.
* tui/tui-layout.h (tui_next_layout): Declare.
* tui/tui-layout.c (tui_next_layout): New function.
Change-Id: Ic101f0e3831a4235a048b3090ef60f025f7449bb
tui_data_window creates new curses windows, but does not pass in
coordinates relative to the data window's origin. This means that the
data window could only ever be displayed as the topmost window in a
layout. This is not a currently problem, because all the existing
layouts do this; but a subsequent patch will add user-defined layouts,
which could do otherwise.
gdb/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
* tui/tui-regs.c (tui_data_window::display_registers_from): Use
correct coordinates.
Change-Id: I5101f2b2869557b87381ebdeebd9b7fd28687831
tui_add_win_to_layout is only ever called for the source or assembly
windows. This simplifies the function by removing the DATA_WIN case.
gdb/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
* tui/tui-layout.h (tui_add_win_to_layout): Add comment.
* tui/tui-layout.c (tui_add_win_to_layout): Add assert. Remove
DATA_WIN case.
Change-Id: Idfca902c6c90153acc5d19af4c33aa74bc3caf31
This is a minor cleanup to change tui_get_low_disassembly_address to
use TUI_DISASM_WIN, rather than the tui_win_list array. This is more
in line with what the rest of the TUI code does.
gdb/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
* tui/tui-disasm.c (tui_get_low_disassembly_address): Use
TUI_DISASM_WIN, not tui_win_list.
Change-Id: I999335ee3f63a4b570e84f320236b78f2bd5b780
This changes gdb to use the "variable" style when printing field
names. I've added new tests for C and Rust, but not other languages.
I chose "variable" because that seemed most straightforward. However,
another option would be to introduce a new "field" style. Similarly,
this patch uses the variable style for enumerator constants -- but
again, a new style could be used if that's preferred.
gdb/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
* valprint.c (generic_val_print_enum_1)
(val_print_type_code_flags): Style member names.
* rust-lang.c (val_print_struct, rust_print_enum)
(rust_print_struct_def, rust_internal_print_type): Style member
names.
* p-valprint.c (pascal_object_print_value_fields): Style member
names. Only call fprintf_symbol_filtered for static members.
* m2-typeprint.c (m2_record_fields, m2_enum): Style member names.
* f-valprint.c (f_val_print): Style member names.
* f-typeprint.c (f_type_print_base): Style member names.
* cp-valprint.c (cp_print_value_fields): Style member names. Only
call fprintf_symbol_filtered for static members.
(cp_print_class_member): Style member names.
* c-typeprint.c (c_print_type_1, c_type_print_base_1): Style
member names.
* ada-valprint.c (ada_print_scalar): Style enum names.
(ada_val_print_enum): Likewise.
* ada-typeprint.c (print_enum_type): Style enum names.
gdb/testsuite/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
* gdb.rust/rust-style.rs: New file.
* gdb.rust/rust-style.exp: New file.
* gdb.base/style.exp: Test structure printing.
* gdb.base/style.c (struct some_struct): New type.
(enum etype): New type.
(struct_value): New global.
Change-Id: I070e1293c6cc830c9ea916af8243410aa384e944
The introductory comment for partial_symtab has been mildly incorrect
since the partial symtab code was changed to allocate partial symtabs
with "new". This patch removes the incorrect text.
gdb/ChangeLog
2020-02-21 Tom Tromey <tom@tromey.com>
* psympriv.h (struct partial_symtab): Update comment.
My earlier patch to fix a declaration mismatch in mips-tdep.h missed a
couple of spots. Basically, I sent it too soon.
This patch fixes a couple more mismatches between a declaration (using
bfd_vma) and the definition (using CORE_ADDR).
gdb/ChangeLog
2020-02-21 Tom Tromey <tromey@adacore.com>
* mips-tdep.h (mips_pc_is_mips16, mips_pc_is_micromips): Parameter
type is CORE_ADDR.
I noticed a regression with board cc-with-dwz:
...
FAIL: gdb.cp/m-static.exp: static const int initialized elsewhere
FAIL: gdb.cp/m-static.exp: info variable everywhere
...
The problem started with commit 0494dbecdf "Consolidate partial symtab
dependency reading".
The commit replaces the dwarf2_psymtab::expand_psymtab specific reading of
dependencies, which contains a "dependencies[i]->user == NULL" test, with a
generic partial_symtab::read_dependencies call, which does not test the user
field.
This patch fixes the regression by adding back the test, in the generic
partial_symtab::read_dependencies.
Build and reg-tested on x86_64-linux.
Tested natively, as well as with boards cc-with-dwz and cc-with-dwz-m.
The patch fixes all 33 regressions with cc-with-dwz, and all 2929 regression
with cc-with-dwz-m.
gdb/ChangeLog:
2020-02-21 Tom de Vries <tdevries@suse.de>
PR gdb/25534
* psymtab.c (partial_symtab::read_dependencies): Don't read dependency
if dependencies[i]->user != NULL.
I am sending this patch on behalf of kmoy@google.com, who discovered the bug
and wrote the fix.
gdb_demangle can return null for strings that don't properly demangle. The null
check was mistakenly removed in commit 43816ebc33. Without this check, GDB
aborts when loading symbols from some binaries.
gdb/ChangeLog
2020-02-21 Ali Tamur <tamur@google.com>
* dwarf2/read.c (dwarf2_name): Add null check.
dwarf2_find_containing_comp_unit has this in its binary search:
if (mid_cu->is_dwz > offset_in_dwz
|| (mid_cu->is_dwz == offset_in_dwz
&& mid_cu->sect_off + mid_cu->length >= sect_off))
high = mid;
The intent here is to determine whether SECT_OFF appears in or before
MID_CU.
I believe this has an off-by-one error, and that the check should use
">" rather than ">=". If the two side are equal, then SECT_OFF
actually appears at the start of the next CU.
I've had this patch kicking around for ages but I forget how I found
the problem.
gdb/ChangeLog
2020-02-20 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (dwarf2_find_containing_comp_unit): Use ">", not
">=", in binary search.
(dwarf2_find_containing_comp_unit): New overload.
(run_test): New self-test.
(_initialize_dwarf2_read): Register new test.
According to the riscv privilege spec, some CSR are only valid when rv32 or
the specific extension is set. We extend the DECLARE_CSR and DECLARE_CSR_ALIAS
to record more informaton we need, and then check whether the CSR is valid
according to these information. We report warning message when the CSR is
invalid, so we have a choice between error and warning by --fatal-warnings
option. Also, a --no-warn/-W option is used to turn the warnings off, if
people don't want the warnings.
gas/
* config/tc-riscv.c (enum riscv_csr_class): New enum. Used to decide
whether or not this CSR is legal in the current ISA string.
(struct riscv_csr_extra): New structure to hold all extra information
of CSR.
(riscv_init_csr_hash): New function. According to the DECLARE_CSR and
DECLARE_CSR_ALIAS, insert CSR extra information into csr_extra_hash.
Call hash_reg_name to insert CSR address into reg_names_hash.
(md_begin): Call riscv_init_csr_hashes for each DECLARE_CSR.
(reg_csr_lookup_internal, riscv_csr_class_check): New functions.
Decide whether the CSR is valid according to the csr_extra_hash.
(init_opcode_hash): Update 'if (hash_error != NULL)' as hash_error is
not a boolean. This is same as riscv_init_csr_hash, so keep the
consistent usage.
* testsuite/gas/riscv/csr-dw-regnums.d: Add -march=rv32if option.
* testsuite/gas/riscv/priv-reg.d: Add f-ext by -march option.
* testsuite/gas/riscv/priv-reg-fail-fext.d: New testcase. The source
file is `priv-reg.s`, and the ISA is rv32i without f-ext, so the
f-ext CSR are not allowed.
* testsuite/gas/riscv/priv-reg-fail-fext.l: Likewise.
* testsuite/gas/riscv/priv-reg-fail-rv32-only.d: New testcase. The
source file is `priv-reg.s`, and the ISA is rv64if, so the
rv32-only CSR are not allowed.
* testsuite/gas/riscv/priv-reg-fail-rv32-only.l: Likewise.
include/
* opcode/riscv-opc.h: Extend DECLARE_CSR and DECLARE_CSR_ALIAS to
record riscv_csr_class.
opcodes/
* riscv-dis.c (print_insn_args): Updated since the DECLARE_CSR is changed.
gdb/
* riscv-tdep.c: Updated since the DECLARE_CSR is changed.
* riscv-tdep.h: Likewise.
* features/riscv/rebuild-csr-xml.sh: Generate the 64bit-csr.xml without
rv32-only CSR.
* features/riscv/64bit-csr.xml: Regernated.
binutils/
* dwarf.c: Updated since the DECLARE_CSR is changed.
There is currently a regression when using
'{putchar,fputc}_unfiltered' with 'puts_unfiltered' which was
introduced by one of the commits that reworked the unfiltered print
code.
The regression makes it impossible to use '{putchar,fputc}_unfiltered'
with 'puts_unfiltered', because the former writes directly to the
ui_file stream using 'stream->write', while the latter uses a buffered
mechanism (see 'wrap_buffer') and delays the printing.
If you do a quick & dirty hack on e.g. top.c:show_gdb_datadir:
@@ -2088,6 +2088,13 @@ static void
show_gdb_datadir (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
+ putchar_unfiltered ('\n');
+ puts_unfiltered ("TEST");
+ putchar_unfiltered ('>');
+ puts_unfiltered ("PUTS");
+ putchar_unfiltered ('\n');
rebuild GDB and invoke the "show data-directory" command, you will
see:
(gdb) show data-directory
>
TESTPUTSGDB's data directory is "/usr/local/share/gdb".
Note how the '>' was printed before the output, and "TEST" and "PUTS"
were printed together.
My first attempt to fix this was to always call 'flush_wrap_buffer' at
the end of 'fputs_maybe_filtered', since it seemed to me that the
function should always print what was requested. But I wasn't sure
this was the right thing to do, so I talked to Tom on IRC and he gave
me another, simpler idea: make '{putchar,fputc}_unfiltered' call into
the already existing 'fputs_unfiltered' function.
This patch implements the idea. I regtested it on the Buildbot, and
no regressions were detected.
gdb/ChangeLog:
2020-02-20 Sergio Durigan Junior <sergiodj@redhat.com>
Tom Tromey <tom@tromey.com>
* utils.c (fputs_maybe_filtered): Call 'stream->puts' instead
of 'fputc_unfiltered'.
(putchar_unfiltered): Call 'fputc_unfiltered'.
(fputc_unfiltered): Call 'fputs_unfiltered'.
The motivation behind this commit is to make it easier to bundle the
Python *.py library files with GDB when statically linking GDB against
libpython. The Python files will be manually added into the GDB
installation tree, and GDB should be able to find them at run-time.
The installation tree will look like this:
.
|-- bin/
|-- include/
|-- lib/
| `-- python3.8/
`-- share/
The benefit here is that the entire installation tree can be bundled
into a single archive and copied to another machine with a different
version of Python installed, and GDB will still work, including its
Python support.
In use the new configure options would be used something like this,
first build and install a static Python library:
mkdir python
cd python
# Clone or download Python into a src/ directory.
mkdir build
export PYTHON_INSTALL_PATH=$PWD/install
cd build
../src/configure --disable-shared --prefix=$PYTHON_INSTALL_PATH
make
make install
Now build and install GDB:
mkdir binutils-gdb
cd binutils-gdb
# Clone or download GDB into a src/ directory.
mkdir build
export GDB_INSTALL_DIR=$PWD/install
cd build
../src/configure \
--prefix=$GDB_INSTALL_DIR \
--with-python=$PYTHON_INSTALL_PATH/bin/python3 \
--with-python-libdir=$GDB_INSTALL_DIR/lib
make all-gdb
make install-gdb
Finally, copy the Python libraries into the GDB install:
cp -r $PYTHON_INSTALL_DIR/lib/python3.8/ $GDB_INSTALL_DIR/lib
After this the Python src, build, and install directories are no
longer needed and can be deleted.
If the new --with-python-libdir option is not used then the existing
behaviour is left unchanged, GDB will look for the Python libraries in
the lib/ directory within the python path. The concatenation of the
python prefix and the string 'lib/' is now done at configure time,
rather than at run time in GDB as it was previous, however, this was
never something that the user had dynamic control over, so there's no
loss of functionality.
gdb/ChangeLog:
* config.in: Regenerate.
* configure: Regenerate.
* configure.ac: Add --with-python-libdir option.
* main.c: Use WITH_PYTHON_LIBDIR.
This patch simplifies compute_and_set_names in a couple of ways.
First, it changes one spot to use obstack_strndup, which is
equivalent, but more concise.
Second, the function ends with two calls to symbol_set_demangled_name.
This can be simplified to a single call.
gdb/ChangeLog
2020-02-19 Tom Tromey <tom@tromey.com>
* symtab.c (general_symbol_info::compute_and_set_names): Use
obstack_strndup. Simplify call to symbol_set_demangled_name.
This is a simple cleanup. These functions used to use the objfile's
obstack for allocation in the hash tables, but they don't anymore.
Remove the unnecessary objfile parameters, which in turn allows removing
some local variables.
gdb/ChangeLog:
* dwarf2/read.c (allocate_signatured_type_table,
allocate_dwo_unit_table, allocate_type_unit_groups_table,
allocate_dwo_file_hash_table, allocate_dwp_loaded_cutus_table):
Remove objfile parameter, update all callers.
A build where CORE_ADDR is not the same as bfd_vma pointed out that
mips_pc_is_mips is declared using bfd_vma as the parameter type, but
defined using CORE_ADDR. This patch fixes the declaration.
gdb/ChangeLog
2020-02-19 Tom Tromey <tromey@adacore.com>
* mips-tdep.h (mips_pc_is_mips): Parameter type is CORE_ADDR.
I happened across a spot that was still using obstack_alloc and
strcpy, rather than obstack_strdup. This patch makes the obvious fix.
gdb/ChangeLog
2020-02-19 Tom Tromey <tromey@adacore.com>
* ada-lang.c (cache_symbol): Use obstack_strdup.
GCC's config/ChangeLog since the last time this merge was done
(in the binutils-gdb commit 0b4d000cc4) is included at the
end of this commit message.
It is worth noting that the binutils-gdb commit 301a9420d9
added the file config/debuginfod.m4 which is not present in GCC's
config/ directory. This file is preserved, unmodified, after this
commit.
In order to regenerate all of the configure files, I configured with
--enable-maintainer-mode, and built the 'all' target. I then did the
same thing on a source tree without this patch, and only committed
those files that changed when this patch was added.
GCC's config/ChangeLog entries:
2020-02-12 Sandra Loosemore <sandra@codesourcery.com>
PR libstdc++/79193
PR libstdc++/88999
* no-executables.m4: Use a non-empty program to test for linker
support.
2020-02-01 Andrew Burgess <andrew.burgess@embecosm.com>
* lib-link.m4 (AC_LIB_LINKFLAGS_BODY): Update shell syntax.
2020-01-27 Andrew Burgess <andrew.burgess@embecosm.com>
* lib-link.m4 (AC_LIB_LINKFLAGS_BODY): Add new
--with-libXXX-type=... option. Use this to guide the selection of
either a shared library or a static library.
2020-01-24 Maciej W. Rozycki <macro@wdc.com>
* toolexeclibdir.m4: New file.
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
* futex.m4: Handle *-uclinux*.
* tls.m4 (GCC_CHECK_TLS): Likewise.
2019-09-06 Florian Weimer <fweimer@redhat.com>
* futex.m4 (GCC_LINUX_FUTEX): Include <unistd.h> for the syscall
function.
2019-07-08 Richard Sandiford <richard.sandiford@arm.com>
* bootstrap-Og.mk: New file.
2019-06-25 Kwok Cheung Yeung <kcy@codesourcery.com>
Andrew Stubbs <ams@codesourcery.com>
* gthr.m4 (GCC_AC_THREAD_HEADER): Add case for gcn.
2019-05-30 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
* ax_count_cpus.m4: New file.
2019-05-02 Richard Biener <rguenther@suse.de>
PR bootstrap/85574
* bootstrap-lto.mk (extra-compare): Set to gcc/lto1$(exeext).
2019-04-16 Martin Liska <mliska@suse.cz>
* bootstrap-lto-lean.mk: Filter out -flto in STAGEtrain_CFLAGS.
2019-04-09 Martin Liska <mliska@suse.cz>
* bootstrap-lto-lean.mk: New file.
2019-03-02 Johannes Pfau <johannespfau@gmail.com>
* mh-mingw: Also set __USE_MINGW_ACCESS flag for C++ code.
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* math.m4, tls.m4: Use AC_LANG_SOURCE.
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69.
config/ChangeLog:
* ax_count_cpus.m4: New file, backported from GCC.
* bootstrap-Og.mk: New file, backported from GCC.
* bootstrap-lto-lean.mk: New file, backported from GCC.
* bootstrap-lto.mk: Changes backported from GCC.
* futex.m4: Changes backported from GCC.
* gthr.m4: Changes backported from GCC.
* lib-link.m4: Changes backported from GCC.
* mh-mingw: Changes backported from GCC.
* no-executables.m4: Changes backported from GCC.
* tls.m4: Changes backported from GCC.
* toolexeclibdir.m4: New file, backported from GCC.
binutils/ChangeLog:
* configure: Regenerate.
gdb/ChangeLog:
* configure: Regenerate.
gdbserver/ChangeLog:
* configure: Regenerate.
gdbsupport/ChangeLog:
* configure: Regenerate.
intl/ChangeLog:
* configure: Regenerate.
libiberty/ChangeLog:
* configure: Regenerate.
zlib/ChangeLog.bin-gdb:
* configure: Regenerate.
I noticed that do_start_initialization, in python.c, checks the result
of xmalloc. However, xmalloc cannot fail, so this check is useless.
This patch also changes the code to use XNEWVEC.
gdb/ChangeLog
2020-02-19 Tom Tromey <tromey@adacore.com>
* python/python.c (do_start_initialization): Use XNEWVEC. Remove
NULL check.
Implement RISC-V/Linux support for both RV64 and RV32 systems, including
XML target description handling based on features determined, GPR and
FPR regset support including dynamic sizing of the latter, and software
breakpoint handling. Define two NT_FPREGSET regsets of a different size
matching the FPR sizes supported for generic `gdbserver' code to pick
from according to what the OS supplies.
Also handle a glibc bug where ELF_NFPREG is defined in terms of NFPREG,
however NFPREG is nowhere defined.
2020-02-19 Maciej W. Rozycki <macro@wdc.com>
Andrew Burgess <andrew.burgess@embecosm.com>
gdb/
* NEWS: Mention RISC-V GNU/Linux GDBserver support.
gdbserver/
* linux-riscv-low.cc: New file.
* Makefile.in (SFILES): Add linux-riscv-low.cc, arch/riscv.c,
and nat/riscv-linux-tdesc.c.
* configure.srv <riscv*-*-linux*> (srv_tgtobj)
(srv_linux_regsets, srv_linux_usrregs, srv_linux_thread_db):
Define.
In preparation for adding the RISC-V gdbserver, this commit
restructures the API for looking up target descriptions.
The current API is riscv_create_target_description, which creates a
target description from a riscv_gdbarch_features, but also caches the
created target descriptions so that for a given features object we
always get back the same target description object. This is important
for GDB due to the way gdbarch objects are reused.
As the same target description is always returned to GDB, and can be
returned multiple times, it is returned as a const, however, the
current cache actually stores a non-const target description. This is
improved in this patch so that the cache holds a const target
description.
For gdbsever, this caching of the target descriptions is not needed,
the gdbserver looks up one target description to describe the target
it is actually running on and that is it. Further the gdbserver
actually needs to modify the target description that is looked up, so
for the gdbsever, returning a const target description is not
acceptable.
This commit aims to address this by creating two parallel target
description APIs, on is the old riscv_create_target_description,
however, this no longer performs any caching, and just creates a new
target description, and returns it as non-const.
The second API is riscv_lookup_target_description, this one performs
the caching, and calls riscv_create_target_description to create a
target description when needed.
In order to make sure the correct API is used in the correct place I
have guarded the code using the GDBSERVER define. For GDB the
riscv_create_target_description is static, and not generally usable
throughout GDB, only the lookup API is global. In gdbserver, the
lookup functions, and the cache are not defined or created at all,
only the riscv_create_target_description API is available.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* arch/riscv.c (struct riscv_gdbarch_features_hasher): Only define
if GDBSERVER is not defined.
(riscv_tdesc_cache): Likewise, also store const target_desc.
(STATIC_IN_GDB): Define.
(riscv_create_target_description): Update declaration with
STATIC_IN_GDB.
(riscv_lookup_target_description): New function, only define if
GDBSERVER is not defined.
* arch/riscv.h (riscv_create_target_description): Declare only
when GDBSERVER is defined.
(riscv_lookup_target_description): New declaration when GDBSERVER
is not defined.
* nat/riscv-linux-tdesc.c (riscv_linux_read_description): Rename to...
(riscv_linux_read_features): ...this, and return
riscv_gdbarch_features instead of target_desc.
* nat/riscv-linux-tdesc.h: Include 'arch/riscv.h'.
(riscv_linux_read_description): Rename to...
(riscv_linux_read_features): ...this.
* riscv-linux-nat.c (riscv_linux_nat_target::read_description):
Update to use riscv_gdbarch_features and
riscv_lookup_target_description.
* riscv-tdep.c (riscv_find_default_target_description): Use
riscv_lookup_target_description instead of
riscv_create_target_description.
If a flag enum has value 0 and the enumeration type does not have an
enumerator with value 0, we currently print:
$1 = (unknown: 0x0)
I don't like the display of "unknown" here, since for flags, 0 is a
an expected value. It just means that no flags are set. This patch
makes it so that we print it as a simple 0 in this situation:
$1 = 0
If there is an enumerator with value 0, it is still printed using that
enumerator, for example (from the test):
$1 = FE_NONE
gdb/ChangeLog:
* valprint.c (generic_val_print_enum_1): When printing a flag
enum with value 0 and there is no enumerator with value 0, print
just "0" instead of "(unknown: 0x0)".
gdb/testsuite/ChangeLog:
* gdb.base/printcmds.exp (test_print_enums): Update expected
output.
When we print the "unknown" part of a flag enum, it is printed in
decimal. I think it would be more useful if it was printed in hex, as
it helps to determine which bits are set more than a decimal value.
gdb/ChangeLog:
* valprint.c (generic_val_print_enum_1): Print unknown part of
flag enum in hex.
gdb/testsuite/ChangeLog:
* gdb.base/printcmds.exp (test_print_enums): Expect hex values
for "unknown".
I have come across some uses cases where it would be desirable to treat
an enum that has duplicate values as a "flag enum". For example, this
one here [1]:
enum membarrier_cmd {
MEMBARRIER_CMD_QUERY = 0,
MEMBARRIER_CMD_GLOBAL = (1 << 0),
MEMBARRIER_CMD_GLOBAL_EXPEDITED = (1 << 1),
MEMBARRIER_CMD_REGISTER_GLOBAL_EXPEDITED = (1 << 2),
MEMBARRIER_CMD_PRIVATE_EXPEDITED = (1 << 3),
MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED = (1 << 4),
MEMBARRIER_CMD_PRIVATE_EXPEDITED_SYNC_CORE = (1 << 5),
MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED_SYNC_CORE = (1 << 6),
/* Alias for header backward compatibility. */
MEMBARRIER_CMD_SHARED = MEMBARRIER_CMD_GLOBAL,
};
The last enumerator is kept for backwards compatibility. Without this
patch, this enumeration wouldn't be considered a flag enum, because two
enumerators collide. With this patch, it would be considered a flag
enum, and the value 3 would be printed as:
MEMBARRIER_CMD_GLOBAL | MEMBARRIER_CMD_GLOBAL_EXPEDITED
Although if people prefer, we could display both MEMBARRIER_CMD_GLOBAL
and MEMBARRIER_CMD_SHARED in the result. It wouldn't be wrong, and
could perhaps be useful in case a bit may have multiple meanings
(depending on some other bit value).
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/include/uapi/linux/membarrier.h?id=0bf999f9c5e74c7ecf9dafb527146601e5c848b9#n125
gdb/ChangeLog:
* dwarf2/read.c (update_enumeration_type_from_children): Allow
flag enums to contain duplicate enumerators.
* valprint.c (generic_val_print_enum_1): Update comment.
gdb/testsuite/ChangeLog:
* gdb.base/printcmds.c (enum flag_enum): Add FE_TWO_LEGACY
enumerator.
GDB has this feature where if an enum looks like it is meant to
represent binary flags, it will present the values of that type as a
bitwise OR of the flags that are set in the value.
The original motivation for this patch is to fix this behavior:
enum hello { AAA = 0x1, BBB = 0xf0 };
(gdb) p (enum hello) 0x11
$1 = (AAA | BBB)
This is wrong because the bits set in BBB (0xf0) are not all set in the
value 0x11, but GDB presents it as if they all were.
I think that enumerations with enumerators that have more than one bit
set should simply not qualify as "flag enum", as far as this
heuristic is concerned. I'm not sure what it means to have flags of
more than one bit. So this is what this patch implements.
I have added an assert in generic_val_print_enum_1 to make sure the flag
enum types respect that, in case they are used by other debug info
readers, in the future.
I've enhanced the gdb.base/printcmds.exp test to cover this case. I've
also added tests for printing flag enums with value 0, both when the
enumeration has and doesn't have an enumerator for value 0.
gdb/ChangeLog:
* dwarf2/read.c: Include "count-one-bits.h".
(update_enumeration_type_from_children): If an enumerator has
multiple bits set, don't treat the enumeration as a "flag enum".
* valprint.c (generic_val_print_enum_1): Assert that enumerators
of flag enums have 0 or 1 bit set.
gdb/testsuite/ChangeLog:
* gdb.base/printcmds.c (enum flag_enum): Prefix enumerators with
FE_, add FE_NONE.
(three): Update.
(enum flag_enum_without_zero): New enum.
(flag_enum_without_zero): New variable.
(enum not_flag_enum): New enum.
(three_not_flag): New variable.
* gdb.base/printcmds.exp (test_artificial_arrays): Update.
(test_print_enums): Add more tests for printing flag enums.
To help with readability, add the type displaced_step_closure_up, an
alias for std::unique_ptr<displaced_step_closure>, and use it throughout
the code base.
gdb/ChangeLog:
* aarch64-tdep.c (aarch64_displaced_step_copy_insn): Use
displaced_step_closure_up.
* aarch64-tdep.h (aarch64_displaced_step_copy_insn): Likewise.
(struct displaced_step_closure_up):
* amd64-tdep.c (amd64_displaced_step_copy_insn): Likewise.
* amd64-tdep.h (amd64_displaced_step_copy_insn): Likewise.
* arm-linux-tdep.c (arm_linux_displaced_step_copy_insn):
Likewise.
* gdbarch.sh (displaced_step_copy_insn): Likewise.
* gdbarch.c, gdbarch.h: Re-generate.
* i386-linux-tdep.c (i386_linux_displaced_step_copy_insn): Use
displaced_step_closure_up.
* i386-tdep.c (i386_displaced_step_copy_insn): Likewise.
* i386-tdep.h (i386_displaced_step_copy_insn): Likewise.
* infrun.h (displaced_step_closure_up): New type alias.
(struct displaced_step_inferior_state) <step_closure>: Change
type to displaced_step_closure_up.
* rs6000-tdep.c (ppc_displaced_step_copy_insn): Use
displaced_step_closure_up.
* s390-tdep.c (s390_displaced_step_copy_insn): Likewise.
While looking at the output of "maint info bfd" with multiple
inferiors, I noticed that there were duplicate entries for
.gnu_debugdata.
There is no reason to re-create this BFD each time it is needed. This
patch arranges to share the data.
gdb/ChangeLog
2020-02-14 Tom Tromey <tom@tromey.com>
* minidebug.c (gnu_debug_key): New global.
(find_separate_debug_file_in_section): Use it.
Change-Id: If139f89f0f07db33f399afdbcfbf5aaeffe4de46
This callback dynamically allocates a specialized displaced_step_closure, and
gives the ownership of the object to its caller. So I think it would make
sense for the callback to return an std::unique_ptr, this is what this patch
implements.
gdb/ChangeLog:
* gdbarch.sh (displaced_step_copy_insn): Change return type to an
std::unique_ptr.
* gdbarch.c: Re-generate.
* gdbarch.h: Re-generate.
* infrun.c (displaced_step_prepare_throw): Adjust to std::unique_ptr
change.
* aarch64-tdep.c (aarch64_displaced_step_copy_insn): Change return
type to std::unique_ptr.
* aarch64-tdep.h (aarch64_displaced_step_copy_insn): Likewise.
* amd64-tdep.c (amd64_displaced_step_copy_insn): Likewise.
* amd64-tdep.h (amd64_displaced_step_copy_insn): Likewise.
* arm-linux-tdep.c (arm_linux_displaced_step_copy_insn): Likewise.
* i386-linux-tdep.c (i386_linux_displaced_step_copy_insn): Likewise.
* i386-tdep.c (i386_displaced_step_copy_insn): Likewise.
* i386-tdep.h (i386_displaced_step_copy_insn): Likewise.
* rs6000-tdep.c (ppc_displaced_step_copy_insn): Likewise.
* s390-tdep.c (s390_displaced_step_copy_insn): Likewise.
displaced_step_inferior_state::reset and displaced_step_clear appear to
have the same goal, but they don't do the same thing.
displaced_step_inferior_state::reset clears more things than
displaced_step_clear, but it misses free'ing the closure, which
displaced_step_clear does.
This patch replaces displaced_step_clear's implementation with just a call to
displaced_step_inferior_state::reset. It then changes
displaced_step_inferior_state::step_closure to be a unique_ptr, to indicate the
fact that displaced_step_inferior_state owns the closure (and so that it is
automatically freed when the field is reset).
The test gdb.base/step-over-syscall.exp caught a problem when doing this, which
I consider to be a latent bug which my cleanup exposes. In
handle_inferior_event, in the TARGET_WAITKIND_FORKED case, if we displaced-step
over a fork syscall, we make sure to restore the memory that we used as a
displaced-stepping buffer in the child. We do so using the
displaced_step_inferior_state of the parent. However, we do it after calling
displaced_step_fixup for the parent, which clears the information in the
parent's displaced_step_inferior_state. It worked fine before, because
displaced_step_clear didn't completely clear the displaced_step_inferior_state
structure, so the required information (in this case the gdbarch) was
still available after clearing.
I fixed it by making GDB restore the child's memory before calling the
displaced_step_fixup on the parent. This way, the data in the
displaced_step_inferior_state structure is still valid when we use it for the
child. This is the error you would get in
gdb.base/step-over-syscall.exp without this fix:
/home/smarchi/src/binutils-gdb/gdb/gdbarch.c:3911: internal-error: ULONGEST gdbarch_max_insn_length(gdbarch*): Assertion `gdbarch != NULL' failed.
gdb/ChangeLog:
* infrun.c (get_displaced_step_closure_by_addr): Adjust to
std::unique_ptr.
(displaced_step_clear): Rename to...
(displaced_step_reset): ... this. Just call displaced->reset ().
(displaced_step_clear_cleanup): Rename to...
(displaced_step_reset_cleanup): ... this.
(displaced_step_prepare_throw): Adjust to std::unique_ptr.
(displaced_step_fixup): Likewise.
(resume_1): Likewise.
(handle_inferior_event): Restore child's memory before calling
displaced_step_fixup on the parent.
* infrun.h (displaced_step_inferior_state) <reset>: Adjust
to std::unique_ptr.
<step_closure>: Change type to std::unique_ptr.
For a fix I intend to submit, I would need a function that counts the
number of set bits in a word. There is __builtin_popcount that is
supported by gcc and clang, but there is also a gnulib module that wraps
that and provides a fallback for other compilers, so I think it would be
good to use it.
I also noticed that there is a bitcount function in arch/arm.c, so I
thought that as a first step I would replace that one with the gnulib
count-one-bits module. This is what this patch does.
The gnulib module provides multiple functions, with various parameter
length (unsigned int, unsigned long int, unsigned long long int), I
chose the one that made sense for each call site based on the argument
type.
gnulib/ChangeLog:
* update-gnulib.sh (IMPORTED_GNULIB_MODULES): Import
count-one-bits module.
* configure: Re-generate.
* aclocal.m4: Re-generate.
* Makefile.in: Re-generate.
* import/count-one-bits.c: New file.
* import/count-one-bits.h: New file.
* import/Makefile.am: Re-generate.
* import/Makefile.in: Re-generate.
* import/m4/gnulib-cache.m4: Re-generate.
* import/m4/gnulib-comp.m4: Re-generate.
* import/m4/count-one-bits.m4: New file.
gdb/ChangeLog:
* arm-tdep.c: Include count-one-bits.h.
(cleanup_block_store_pc): Use count_one_bits.
(cleanup_block_load_pc): Use count_one_bits.
(arm_copy_block_xfer): Use count_one_bits.
(thumb2_copy_block_xfer): Use count_one_bits.
(thumb_copy_pop_pc_16bit): Use count_one_bits.
* arch/arm-get-next-pcs.c: Include count-one-bits.h.
(thumb_get_next_pcs_raw): Use count_one_bits.
(arm_get_next_pcs_raw): Use count_one_bits_l.
* arch/arm.c (bitcount): Remove.
* arch/arm.h (bitcount): Remove.
call_site_find_chain returns a pointer that the caller must
deallocate. It seemed better here to return a unique_xmalloc_ptr
instead.
gdb/ChangeLog
2020-02-14 Tom Tromey <tromey@adacore.com>
* dwarf2/frame-tailcall.c (dwarf2_tailcall_sniffer_first):
Update.
* dwarf2/loc.h (call_site_find_chain): Return unique_xmalloc_ptr.
* dwarf2/loc.c (call_site_find_chain_1): Return
unique_xmalloc_ptr.
(call_site_find_chain): Likewise.
I see for some program at gdb startup:
...
Samples: 102K of event 'cycles:pu', Event count (approx.): 91710925103
Overhead Command Shared Object Symbol
15.21% gdb gdb [.]
lnp_state_machine::handle_special
...
where the divisions are the places we stall. The following
micro-optimizes things but it smells like m_line_header->line_range
is constant, likewise probably m_line_header->maximum_ops_per_instruction
so eventually the divisions could be avoided completely with some
lookup table.
Well. Micro-optimizing with this patch improves things
(don't expect [load] CSE over the gdbarch_adjust_dwarf2_line call).
Build and reg-tested on x86_64-linux.
gdb/ChangeLog:
2020-02-14 Richard Biener <rguenther@suse.de>
* dwarf2/read.c (lnp_state_machine::handle_special_opcode): Apply CSE
on expression with division operators.
This removes some dead code from event-loop.c.
This patch is from my old series to merge the gdb and gdbserver event
loops; but since it is just removing dead code, it seemed simple to
commit it separately.
gdb/ChangeLog
2020-02-12 Tom Tromey <tom@tromey.com>
* event-loop.c (event_data, gdb_event, event_handler_func):
Remove.
Now that comp_unit and the remaining frame data are all independent of
the objfile, it can all be stored on the BFD and shared across
inferiors.
As with other code doing this same thing, care must be taken to not
share the data when the objfile requires relocations. So, two keys
are used: one for the BFD and one for the objfile, and
gdb_bfd_requires_relocations is used to differentiate between the two
cases.
gdb/ChangeLog
2020-02-12 Tom Tromey <tom@tromey.com>
* dwarf2/frame.c (dwarf2_frame_bfd_data): New global.
(dwarf2_frame_objfile_data): Add comment.
(find_comp_unit, set_comp_unit): New functions.
(dwarf2_frame_find_fde): Use find_comp_unit.
(dwarf2_build_frame_info): Use set_comp_unit.
This removes the objfile backlink from comp_unit. The only remaining
uses involved fetching the text offset from the objfile. However,
this is already conveniently computed at all the sites that call
execute_cfa_program, and so it can simply be passed in.
gdb/ChangeLog
2020-02-12 Tom Tromey <tom@tromey.com>
* dwarf2/frame.c (struct comp_unit) <objfile>: Remove.
(comp_unit): Don't initialize objfile.
(execute_cfa_program): Add text_offset parameter.
(execute_cfa_program_test, dwarf2_fetch_cfa_info)
(dwarf2_frame_cache): Update.
(dwarf2_build_frame_info): Don't set "objfile" member.
The DWARF frame comp_unit object still has a backlink to the objfile.
In order to be truly objfile-independent, this must be removed.
This patch removes one such use, by passing the gdbarch to
decode_frame_entry directly.
gdb/ChangeLog
2020-02-12 Tom Tromey <tom@tromey.com>
* dwarf2/frame.c (decode_frame_entry_1): Add gdbarch parameter.
(decode_frame_entry): Likewise.
(dwarf2_build_frame_info): Update.
This adds an auto_obstack to the DWARF frame comp_unit object, and
then changes the remaining code here to use the comp_unit obstack
rather than the objfile obstack.
At this point, all the storage for frame data is self-contained --
that is, it is independent of the objfile.
gdb/ChangeLog
2020-02-12 Tom Tromey <tom@tromey.com>
* dwarf2/frame.c (struct comp_unit) <obstack>: New member.
(decode_frame_entry_1): Use the comp_unit obstack.
This changes the DWARF frame code to store the comp_unit on the
objfile, rather than storing the FDE table. It also changes the
comp_unit to be heap-allocated using "new".
This change makes it simpler for a later patch to add a field to the
comp_unit, and to have deallaction work properly. This in turn is
important for making the frame data be independent of the objfile.
gdb/ChangeLog
2020-02-12 Tom Tromey <tom@tromey.com>
* dwarf2/frame.c (struct comp_unit): Add initializers and
constructor.
(dwarf2_frame_objfile_data): Store a comp_unit.
(dwarf2_frame_find_fde): Update.
(dwarf2_build_frame_info): Use "new".
This removes struct dwarf2_fde_table, replacing it with a typedef of
std::vector. This simplifies the code somewhat.
gdb/ChangeLog
2020-02-12 Tom Tromey <tom@tromey.com>
* dwarf2/frame.c (struct dwarf2_fde_table): Remove.
(dwarf2_fde_table): Typedef for std::vector.
(dwarf2_frame_objfile_data): Remove the deleter. Now static.
(dwarf2_frame_find_fde, add_fde, decode_frame_entry_1)
(decode_frame_entry): Update.
(dwarf2_build_frame_info): Use "new".
I am keeping the (int) casts because a future patch will change the type
to bool.
gdb/ChangeLog:
2020-02-12 Christian Biesinger <cbiesinger@google.com>
* arm-tdep.c (arm_dump_tdep): Print more fields of tdep.
The type dwarf_expr_baton is unused and can be removed.
gdb/ChangeLog
2020-02-12 Tom Tromey <tom@tromey.com>
* dwarf2/loc.c (struct dwarf_expr_baton): Remove.
Change-Id: Id8342da31398b9b4b08f31be7c3d612e9590bbbf
This updates a comment in psymtab.h to reflect the current reality.
gdb/ChangeLog
2020-02-11 Tom Tromey <tom@tromey.com>
* psymtab.h: Update comment.
Change-Id: I438bb5929c3ebd1a4c6e9a902490f2ef63014ab3
Add DISABLE_COPY_AND_ASSIGN to struct auto_obstack, to prevent copying
it. Copying an auto_obstack would be a bug.
2020-02-11 Tom Tromey <tom@tromey.com>
* gdb_obstack.h (struct auto_obstack): Use
DISABLE_COPY_AND_ASSIGN.
Change-Id: Ic9e5ab20acfcfa61c241fed4d99bbb1caefba3cd
dwarf2/frame.h forward-declares struct objfile, but there's no need
for this.
gdb/ChangeLog
2020-02-11 Tom Tromey <tom@tromey.com>
* dwarf2/frame.h (struct objfile): Don't forward declare.
Change-Id: I4d54d46ac9422eeb64dc5f0b934792e77a875aa5
The non-deprecated equivalent is implementing the gdbarch function
iterate_over_regset_sections, this patch does that.
Tested by generating a core file on cris under qemu and comparing
the output of "info registers".
This also fixes this warning when loading cris core files:
warning: Unexpected size of section `.reg/164' in core file.
gdb/ChangeLog:
2020-02-11 Christian Biesinger <cbiesinger@google.com>
* cris-tdep.c (cris_supply_gregset): Change signature to match
what struct regset expects.
(cris_regset): New struct.
(fetch_core_registers): Remove.
(cris_iterate_over_regset_sections): New function.
(_initialize_cris_tdep): Don't call deprecated_add_core_fns.
(cris_gdbarch_init): Call set_gdbarch_iterate_over_regset_sections.
Change-Id: Ieef895b5a2fdc797d1a913cd1c0c07563edfe8e7
These are for the obsolete FPA architecture.
gdb/ChangeLog:
2020-02-11 Christian Biesinger <cbiesinger@google.com>
* arch/arm.h (enum gdb_regnum): Add comment for the FP0..7
registers.
Change-Id: I6920616318ee637493d4ca12b91fa2ebcd103d76
In my previous commit, I did a last minute modification of warning.m4,
but forgot to re-generate the configure scripts, this commit fixes that.
gdb/ChangeLog:
* configure: Re-generate.
gdbserver/ChangeLog:
* configure: Re-generate.
gdbsupport/ChangeLog:
* configure: Re-generate.
Commit 85f0dd3ce ("[gdb] Fix -Wstrict-null-sentinel warnings") fixed
some violations of -Wstrict-null-sentinel. If we want to enforce this
warning, I think we should enable it in our warning.m4 file.
gdbsupport/ChangeLog:
* warning.m4: Add -Wstrict-null-sentinel.
* configure: Re-generate.
gdbserver/ChangeLog:
* configure: Re-generate.
gdb/ChangeLog:
* configure: Re-generate.
This file is used by gdbsupport, gdbserver and gdb, so I think it
belongs in gdbsupport. Move it there and update the references the
various acinclude.m4 files.
gdbsupport/ChangeLog:
* warning.m4: Move here, from gdb/warning.m4.
* acinclude.m4: Update warning.m4 path.
* Makefile.in: Re-generate.
gdbserver/ChangeLog:
* acinclude.m4: Update warning.m4 path.
gdb/ChangeLog:
* acinclude: Update warning.m4 path.
* warning.m4: Move to gdbsupport.
When passed in CXXFLAGS, -Wstrict-null-sentinel triggers twice in a
gdb/gdbserver build.
Fix the two occurrences.
Build and reg-tested on x86_64-linux.
gdb/ChangeLog:
2020-02-10 Tom de Vries <tdevries@suse.de>
* dwarf2/read.c (process_psymtab_comp_unit_reader): Cast concat NULL
sentinel to char *.
gdbsupport/ChangeLog:
2020-02-10 Tom de Vries <tdevries@suse.de>
* environ.c (gdb_environ::set): Cast concat NULL sentinel to char *.
Say we're debugging a test-case with CUs with name "<artificial>", meaning
not originating from a single file compilation, and use the verbose setting:
...
$ gdb -iex "set verbose on" -batch cc1
Reading symbols from cc1...
Reading in symbols for <artificial>... \
and /tmp/trunk/gcc/attribs.c... \
...
and /tmp/trunk/gcc/tree-ssa-reassoc.c... \
done.
...
From the "/tmp/trunk/gcc/attribs.c" message, it's clear which CU is loaded. But
that's not the case for the "<artificial>" message.
The message uses the filename field of struct partial_symtab, which is
documented like this:
...
/* Name of the source file which this partial_symtab defines,
or if the psymtab is anonymous then a descriptive name for
debugging purposes, or "". It must not be NULL. */
...
So, fix this by setting the filename field to a more descriptive name than
"<artificial>", by appending the CU offset.
This way, we print instead:
...
$ gdb -iex "set verbose on" -batch cc1
Reading symbols from cc1...
Reading in symbols for <artificial>@0x41146d9 \
and /tmp/trunk/gcc/attribs.c... \
... \
and /tmp/trunk/gcc/tree-ssa-reassoc.c... \
done.
...
Build and reg-tested on x86_64-linux.
gdb/ChangeLog:
2020-02-09 Tom de Vries <tdevries@suse.de>
* dwarf2read.c (process_psymtab_comp_unit_reader): Append CU offset to
filename if it matches "<artificial>".
cutu_reader has a "keep" parameter, which is used to decide what to do
with a new CU when the reader is destroyed. Most code does not try to
preserve the CU, so this patch removes this parameter and instead adds
a new method that users can call to preserve the CU on the chain.
gdb/ChangeLog
2020-02-08 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (class cutu_reader) <cutu_reader,
init_tu_and_read_dwo_dies>: Remove "keep" parameter.
<keep>: Declare method.
<m_keep>: Remove member.
<~cutu_reader>: Remove.
(cutu_reader::init_tu_and_read_dwo_dies): Update.
(cutu_reader::cutu_reader): Update.
(cutu_reader::keep): Rename from ~cutu_reader.
(process_psymtab_comp_unit, build_type_psymtabs_1)
(process_skeletonless_type_unit, load_partial_comp_unit)
(load_full_comp_unit, dwarf2_read_addr_index)
(read_signatured_type): Update.
Change-Id: I859b1c64313569d76d46317c14e9b077ebc3a27b
This changes the "want_partial_unit" parameters to have type bool, and
also removes the parameter from process_psymtab_comp_unit_reader.
This latter change seemed like an improvement, because it avoids a
pointless function call in the case where we are not planning to read
a partial unit.
2020-02-08 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (process_psymtab_comp_unit_reader): Remove
"want_partial_unit" parameter.
(process_psymtab_comp_unit): Change want_partial_unit to bool.
Inline check for DW_TAG_partial_unit.
(dwarf2_build_psymtabs_hard, scan_partial_symbols): Update.
Change-Id: I99e647f0c4faa3346e90a6e7bacc82af57eccff1
This moves read_n_bytes and read_direct_string to be with the the
low-level value-reading code.
2020-02-08 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (read_n_bytes, read_direct_string): Move to
read.c.
* dwarf2/leb.h (read_n_bytes, read_direct_string): Move from
read.c.
Change-Id: Id07bfa13d93c0ac1f47a385749a8f01f4755b818
This changes read_address to be a method on comp_unit_head.
2020-02-08 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (read_address): Move to comp-unit.c.
(dwarf2_rnglists_process, dwarf2_ranges_process)
(read_attribute_value, dwarf_decode_lines_1)
(var_decode_location, decode_locdesc): Update.
* dwarf2/comp-unit.c (comp_unit_head::read_address): Move from
read.c. Remove "cu" parameter.
* dwarf2/comp-unit.h (struct comp_unit_head) <read_address>: New
method.
Change-Id: Ibd6c7235f2e4d5fd88c272cfd2c3d3328618cc56
This changes one of the read_offset overloads to be a method on
comp_unit_head.
2020-02-08 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (read_attribute_value, read_indirect_string)
(read_indirect_line_string): Update.
* dwarf2/comp-unit.c (read_offset): Remove.
(read_comp_unit_head): Update.
* dwarf2/comp-unit.h (struct comp_unit_head) <read_offset>: New
method.
(read_offset): Don't declare.
Change-Id: Ia595702a5748337b7c031352bc437956baab9990
This creates the new files dwarf2/comp-unit.[ch], moving
comp_unit_head and helpers to those files. A couple of functions are
turned into methods, because it was convenient to do so now.
2020-02-08 Tom Tromey <tom@tromey.com>
* Makefile.in (COMMON_SFILES): Add dwarf2/comp-unit.c.
* dwarf2/read.c (struct comp_unit_head): Move to
dwarf2/comp-unit.h.
(enum class rcuh_kind): Move to comp-unit.h.
(get_cu_length, offset_in_cu_p): Now methods on comp_unit_head.
(read_comp_unit_head, error_check_comp_unit_head)
(read_and_check_comp_unit_head): Move to comp-unit.c.
(read_offset, dwarf_unit_type_name): Likewise.
(create_debug_type_hash_table, read_cutu_die_from_dwo)
(cutu_reader::cutu_reader, read_call_site_scope)
(find_partial_die, follow_die_offset): Update.
* dwarf2/comp-unit.h: New file, from dwarf2read.c.
Change-Id: Id961b9674c0081ed061083c8152c38b27b27388a
This moves read_offset_1 to leb.c, as it is a low-level data-reading
function. It is also renamed to remove the "_1", because gdb can use
overloading now, and this is clearer.
2020-02-08 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (read_offset_1): Move to leb.c.
(read_abbrev_offset, read_offset, dwarf_decode_line_header)
(dwarf_decode_macro_bytes): Update.
* dwarf2/leb.c (read_offset): Rename; move from read.c.
* dwarf2/leb.h (read_offset): Declare.
Change-Id: I048140598acfa76eade2cc529ab7933d4b9ca0b3
This changes dwarf2_section_size to be a method on
dwarf2_section_info.
2020-02-08 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (dwarf2_section_size): Remove.
(error_check_comp_unit_head, dwarf2_symbol_mark_computed):
Update.
* dwarf2/section.h (struct dwarf2_section_info) <get_size>: New method.
Change-Id: I12928fee5c84350ce98883e329357b86888d639b
There are two implementations of read_initial_length in gdb. This
merges them and moves the resulting function to leb.c.
2020-02-08 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (read_initial_length): Move to leb.c.
* dwarf2/leb.h (read_initial_length): Declare.
* dwarf2/leb.c (read_initial_length): Move from read.c. Add
handle_nonstd parameter.
* dwarf2/frame.c (read_initial_length): Remove.
(decode_frame_entry_1): Update.
Change-Id: I34d37bad0f8a584bfa781432cba25e05e1bd5750
This moves dwarf2_per_cu_data::imported_symtabs earlier, near where
the other data members are located.
2020-02-08 Tom Tromey <tom@tromey.com>
* dwarf2/read.h (struct dwarf2_per_cu_data) <imported_symtabs>:
Move earlier.
Change-Id: I314ddaa6f67c53a848e513b3f6d42913bd957833
This moves the line_header class to a pair of new files, making
dwarf2/read.c somewhat smaller.
2020-02-08 Tom Tromey <tom@tromey.com>
* dwarf2/read.h (dwarf_line_debug): Declare.
* Makefile.in (COMMON_SFILES): Add dwarf2/line-header.c.
* dwarf2/read.c: Move line_header code to new files.
(dwarf_line_debug): No longer static.
* dwarf2/line-header.c: New file.
* dwarf2/line-header.h: New file.
Change-Id: I8d9d8a2398b4e888e20cc5dd68d041c28b5a06e3
This changes the two new line_table methods to return
unique_xmalloc_ptr. This removes a bit of manual memory management.
2020-02-08 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (struct line_header) <file_full_name,
file_file_name>: Return unique_xmalloc_ptr.
(line_header::file_file_name): Update.
(line_header::file_full_name): Update.
(dw2_get_file_names_reader): Update.
(macro_start_file): Update.
Change-Id: I9442dba43882fb26097d0770a291eea2b03913a4
This changes file_full_name and file_file_name methods to be methods
on line_header. This seems more clear to me.
2020-02-08 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (struct line_header) <file_full_name,
file_file_name>: Declare methods.
(dw2_get_file_names_reader): Update.
(file_file_name): Now a method.
(file_full_name): Likewise.
(macro_start_file): Update.
Change-Id: I50d3e91665a9637c732e1e8d8e4263764c766d9c
dwarf_always_disassemble is only used in dwarf2/loc.c, so move the
definition and the command infrastructure to that file.
2020-02-08 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (dwarf_always_disassemble)
(show_dwarf_always_disassemble): Move to loc.c.
(_initialize_dwarf2_read): Move "always-disassemble" registration
to loc.c.
* dwarf2/read.h (dwarf_always_disassemble): Don't declare.
* dwarf2/loc.c (dwarf_always_disassemble): Move from read.c. Now
static.
(show_dwarf_always_disassemble): Move from read.c.
(_initialize_dwarf2loc): Move always-disassemble from read.c.
Change-Id: I33fb88112e98e583c3f4919d20e4d100f2ea0124
This changes dwarf2_per_objfile::quick_file_names_table to be an
htab_up. This just removes a bit of manual management.
2020-02-08 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (~dwarf2_per_objfile): Update.
(create_quick_file_names_table): Return htab_up.
(dw2_get_file_names_reader, dw2_forget_cached_source_info):
Update.
* dwarf2/read.h (struct dwarf2_per_objfile)
<quick_file_names_table>: Now htab_up.
Change-Id: I4ff2fce8b8af27f4bfe01a11b97a889edfd23151
abbrev_table::read increments cur_abbrev->num_attrs in the inner loop,
but there's no need to do this, as the information is already stored
in the temporary vector.
2020-02-08 Tom Tromey <tom@tromey.com>
* dwarf2/abbrev.c (abbrev_table::read): Simplify.
Change-Id: I765f12850ffa1c6066e884bb22c94468d1abdba4
This changes abbrev_table to use an htab_up rather than an ad hoc,
bucket-based hash table.
2020-02-08 Tom Tromey <tom@tromey.com>
* dwarf2/abbrev.c (abbrev_table): Move constructor from header.
Rewrite.
(abbrev_table::add_abbrev, abbrev_table::lookup_abbrev): Rewrite.
* dwarf2/abbrev.h (struct abbrev_info) <next>: Remove.
(abbrev_table::abbrev_table): No longer inline.
(ABBREV_HASH_SIZE): Remove.
(abbrev_table::m_abbrevs): Now an htab_up.
Change-Id: Icbaa8e49501f9c43218d6a81a7e8c4d3a77d65dc
This cleans up the DWARF abbrev_table API a bit, primarily by making
various methods and members private.
2020-02-08 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (read_cutu_die_from_dwo): Update.
(cutu_reader): Update.
(build_type_psymtabs_1): Update.
* dwarf2/abbrev.c (abbrev_table::read): Rename.
(abbrev_table::alloc_abbrev): Update.
* dwarf2/abbrev.h (abbrev_table_up): Move earlier.
(abbrev_table::read): New static method, renamed from
abbrev_table_read_table.
(abbrev_table::alloc_abbrev)
(abbrev_table::add_abbrev): Now private.
(abbrev_table::abbrev_table): Now private.
(abbrev_table::m_abbrev_obstack): Now private. Rename.
Change-Id: I320dca83b799f672909ae66f73b7aca266adbaf9
This changes dwarf2_per_objfile::die_type_hash to be an htab_up,
moving its contents off the objfile obstack.
2020-02-08 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (set_die_type, get_die_type_at_offset): Update.
* dwarf2/read.h (struct dwarf2_per_objfile) <die_type_hash>: Now
htab_up.
Change-Id: Ic651f99ebf71bf7ad2dc2880192adacf7b60964a
This changes dwp_file to use htab_up for the loaded_cus and loaded_tus
members. This lets us avoid allocating the contents of these hash
tables on the objfile obstack.
2020-02-08 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (struct dwp_file) <loaded_cus, loaded_tus>: Now
htab_up.
(lookup_dwo_unit_in_dwp): Update.
(allocate_dwp_loaded_cutus_table): Return htab_up. Don't allocate
on obstack.
Change-Id: Id61209bf5c6c6faa0c067195af31fbcf26813a3a
This changes allocate_dwo_file_hash_table so that it does not use the
objfile obstack to store the contents of the hash table.
2020-02-08 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (allocate_dwo_file_hash_table): Don't allocate on
obstack.
Change-Id: Ic20a618acc7277e56aa18580c68f75c793bef97b
This changes dwarf2_per_objfile::line_header_hash to be an htab_up,
and changes it to use heap allocation.
2020-02-08 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (~dwarf2_per_objfile): Don't delete
line_header_hash.
(handle_DW_AT_stmt_list): Update. Don't allocate on obstack.
* dwarf2/read.h (struct dwarf2_per_objfile) <line_header_hash>:
Change type to htab_up.
Change-Id: Icb148a270838c0f96f38fc4a28b5b77d067927b6
This changes dwarf2_per_objfile::type_unit_groups to be an htab_up,
again allowing us to move the memory used by the hash table from the
objfile obstack to the heap.
2020-02-08 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (allocate_type_unit_groups_table): Return
htab_up. Don't allocate on obstack.
(get_type_unit_group, dwarf2_build_psymtabs_hard): Update.
* dwarf2/read.h (struct dwarf2_per_objfile) <type_unit_groups>:
Change type to htab_up.
Change-Id: Ia045df0ff3ec30aac813da5a9a2314a607ef7ec8
This changes dwarf2_per_objfile::signatured_types to be an htab_up.
This in turn lets us change it not to use the objfile obstack for
allocation; obstack allocation for hash tables is a bad practice
because it leads to excess memory use if the table is ever resized.
gdb/ChangeLog
2020-02-08 Tom Tromey <tom@tromey.com>
* dwarf2/read.h (struct dwarf2_per_objfile) <signatured_types>:
Change type to htab_up.
* dwarf2/read.c (create_signatured_type_table_from_index)
(create_signatured_type_table_from_debug_names)
(create_all_type_units, add_type_unit)
(lookup_dwo_signatured_type, lookup_signatured_type)
(process_skeletonless_type_unit): Update.
(create_debug_type_hash_table, create_debug_types_hash_table):
Change type of types_htab.
(allocate_signatured_type_table, allocate_dwo_unit_table): Return
htab_up. Don't allocate on obstack.
(create_cus_hash_table): Change type of cus_htab parameter.
(struct dwo_file) <cus, tus>: Now htab_up.
(lookup_dwo_signatured_type, lookup_dwo_cutu)
(process_dwo_file_for_skeletonless_type_units, lookup_dwo_cutu)
(queue_and_load_all_dwo_tus): Update.
* dwarf2/index-write.c (write_gdbindex): Update.
(write_debug_names): Update.
Change-Id: I290a209b96945fb5f415c82723b62830e9c4b467
This removes some queue-related globals from the DWARF reader, in
favor of a new member on dwarf2_per_objfile. Globals must be avoided
in this code, because they prevent multi-threading the reader.
gdb/ChangeLog
2020-02-08 Tom Tromey <tom@tromey.com>
* dwarf2/read.h (struct dwarf2_queue_item): Move from
dwarf2/read.c. Remove "next" member. Add constructor ntad
destructor.
(struct dwarf2_per_objfile) <queue>: New member.
* dwarf2/read.c (struct dwarf2_queue_item): Move to
dwarf2/read.h.
(dwarf2_queue, dwarf2_queue_tail): Remove.
(class dwarf2_queue_guard): Add parameter to constructor. Use
DISABLE_COPY_AND_ASSIGN.
<m_per_objfile>: New member.
<~dwarf2_queue_guard>: Rewrite.
(dw2_do_instantiate_symtab, queue_comp_unit, process_queue):
Update.
(~dwarf2_queue_item): New.
Change-Id: Ied1f6ff3691352a66c4709b0b2cba0588f49f79a
Many functions take a "has_children" parameter (either as an in- or
out-parameter). However, it seems to me that it makes more sense to
have "has_children" be an attribute of a DIE. Making this change
allows this parameter to be eliminated in many places.
gdb/ChangeLog
2020-02-08 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (struct die_info) <has_children>: New member.
(dw2_get_file_names_reader): Remove has_children.
(dw2_get_file_names): Update.
(read_cutu_die_from_dwo): Remove has_children.
(cutu_reader::init_tu_and_read_dwo_dies)
(cutu_reader::cutu_reader): Update.
(process_psymtab_comp_unit_reader, build_type_psymtabs_reader):
Remove has_children.
(build_type_psymtabs_1, process_skeletonless_type_unit)
(load_partial_comp_unit, load_full_comp_unit): Update.
(create_dwo_cu_reader): Remove has_children.
(create_cus_hash_table, read_die_and_children): Update.
(read_full_die_1,read_full_die): Remove has_children.
(read_signatured_type): Update.
(class cutu_reader) <has_children>: Remove.
Change-Id: I0d3d51ae9379554a66032648d51124bba07f87b4
die_reader_specs::comp_dir is assigned but never read; this patch
removes it.
gdb/ChangeLog
2020-02-08 Tom Tromey <tom@tromey.com>
* dwarf2read.c (struct die_reader_specs) <comp_dir>: Remove.
(init_cu_die_reader, read_cutu_die_from_dwo): Update.
Change-Id: I9818a2593197a6972cddec23cd2f3dd0ce28f580
There's no need to forward-declare struct die_info in dwarf2read.h.
gdb/ChangeLog
2020-02-08 Tom Tromey <tom@tromey.com>
* dwarf2read.h (struct die_info): Don't declare.
Change-Id: I0b8dbf99558b9547d418cfd8ef387a21f7dfa660
die_info_ptr is not used and so can be removed.
gdb/ChangeLog
2020-02-08 Tom Tromey <tom@tromey.com>
* dwarf2read.h (die_info_ptr): Remove typedef.
Change-Id: Ibd0a5ad55876dc96a35b658adc36348f01e48884
This changes attr_form_is_block to be a method. This is done
separately because, unlike the other attribute functions,
attr_form_is_block had special handling for the case where the
argument was NULL. This required auditing each call site; in most
cases, NULL was already ruled out, but in a few spots, an additional
check was needed.
gdb/ChangeLog
2020-02-08 Tom Tromey <tom@tromey.com>
* dwarf2read.c (read_call_site_scope)
(handle_data_member_location, dwarf2_add_member_fn)
(mark_common_block_symbol_computed, read_common_block)
(attr_to_dynamic_prop, partial_die_info::read)
(var_decode_location, dwarf2_fetch_die_loc_sect_off)
(dwarf2_symbol_mark_computed, set_die_type): Update.
* dwarf2/attribute.h (struct attribute) <form_is_block>: Declare
method.
(attr_form_is_block): Don't declare.
* dwarf2/attribute.c (attribute::form_is_block): Now a method.
Change-Id: Idfb290c61d738301ab991666f43e0b9cf577b2ae
This moves the attribute-related code out of dwarf2read.c and into the
new files dwarf2/attribute.[ch].
gdb/ChangeLog
2020-02-08 Tom Tromey <tom@tromey.com>
* dwarf2read.c (struct attribute, DW_STRING)
(DW_STRING_IS_CANONICAL, DW_UNSND, DW_BLOCK, DW_SND, DW_ADDR)
(DW_SIGNATURE, struct dwarf_block, attr_value_as_address)
(attr_form_is_block, attr_form_is_section_offset)
(attr_form_is_constant, attr_form_is_ref): Move.
* dwarf2/attribute.h: New file.
* dwarf2/attribute.c: New file, from dwarf2read.c.
* Makefile.in (COMMON_SFILES): Add dwarf2/attribute.c.
Change-Id: I1ea4c146256a1b9e38b66f1c605d782a14eeded7
This moves the abbrev table code out of dwarf2read.c and into new
files dwarf2/abbrev.[ch].
gdb/ChangeLog
2020-02-08 Tom Tromey <tom@tromey.com>
* dwarf2read.c (abbrev_table_up, struct abbrev_info)
(struct attr_abbrev, ABBREV_HASH_SIZE, struct abbrev_table):
Move.
(read_cutu_die_from_dwo, build_type_psymtabs_1): Update.
(abbrev_table::alloc_abbrev, abbrev_table::add_abbrev)
(abbrev_table::lookup_abbrev, abbrev_table_read_table): Move to
abbrev.c.
* dwarf2/abbrev.h: New file.
* dwarf2/abbrev.c: New file, from dwarf2read.c.
* Makefile.in (COMMON_SFILES): Add dwarf2/abbrev.c.
Change-Id: I87911bc5297de4407587ca849fef8e8d19136c30
This moves some section-handling code from dwarf2read.c into new
files, dwarf2/section.[ch].
gdb/ChangeLog
2020-02-08 Tom Tromey <tom@tromey.com>
* dwarf2read.h (struct dwarf2_section_info, dwarf2_read_section):
Move to dwarf2/section.h.
* dwarf2read.c (get_containing_section, get_section_bfd_owner)
(get_section_bfd_section, get_section_name)
(get_section_file_name, get_section_id, get_section_flags)
(dwarf2_section_empty_p, dwarf2_read_section): Moe to
dwarf2/section.c.
* dwarf2/section.h: New file.
* dwarf2/section.c: New file, from dwarf2read.c.
* Makefile.in (COMMON_SFILES): Add dwarf2/section.c.
Change-Id: I9f8498094cf99d9521e9481622ce8adbd453daf4
This moves some scalar-unpacking code into a couple of new files,
dwarf2/leb.h and dwarf2/leb.c.
gdb/ChangeLog
2020-02-08 Tom Tromey <tom@tromey.com>
* dwarf2read.h (read_unsigned_leb128): Don't declare.
* dwarf2read.c (read_1_byte, read_1_signed_byte, read_2_bytes)
(read_2_signed_bytes, read_3_bytes, read_4_bytes)
(read_4_signed_bytes, read_8_bytes): Move to dwarf2/leb.h.
(read_unsigned_leb128, read_signed_leb128): Move to dwarf2/leb.c.
* dwarf2/leb.h: New file, from dwarf2read.c.
* dwarf2/leb.c: New file, from dwarf2read.c.
* dwarf2-frame.c (read_1_byte, read_4_bytes, read_8_bytes):
Remove.
* Makefile.in (CONFIG_SRC_SUBDIR): Add dwarf2.
(COMMON_SFILES): Add dwarf2/leb.c.
Change-Id: Idd19647686c8f959d226a95fdfca4db47c6e96d0
This patch redefines fputs_unfiltered in utils.c, with new behavior to
forward parameters to fputs_maybe_filtered. This makes
fputs_unfiltered identical to fputs_filtered, except filtering is
disabled.
Some callers of fputs_unfiltered have been updated to use ui_file_puts
where they were using other ui_file_* functions anyway for IO.
This fixes the problem I saw with \032\032post-prompt annotation being
flushed to stdout in the wrong order.
2020-02-05 Iain Buclaw <ibuclaw@gdcproject.org>
PR gdb/25190:
* gdb/remote-sim.c (gdb_os_write_stderr): Update.
* gdb/remote.c (remote_console_output): Update.
* gdb/ui-file.c (fputs_unfiltered): Rename to...
(ui_file_puts): ...this.
* gdb/ui-file.h (ui_file_puts): Add declaration.
* gdb/utils.c (emit_style_escape): Update.
(flush_wrap_buffer): Update.
(fputs_maybe_filtered): Update.
(fputs_unfiltered): Add function.
Change-Id: I17ed5078f71208344f2f8ab634a6518b1af6e213
Commit a0c1ffedc regressed certain cases coming from Eclipse.
See PR breakpoints/24915.
gdb/ChangeLog
2020-02-07 Tom Tromey <tromey@adacore.com>
PR breakpoints/24915:
* source.c (find_and_open_source): Do not check basenames_may_differ.
gdb/testsuite/ChangeLog
2020-02-07 Tom Tromey <tromey@adacore.com>
PR breakpoints/24915:
* gdb.base/annotate-symlink.exp: Use setup_xfail.
Change-Id: Iadbf42f35eb40c95ad32b2108ae25d8f199998bd
This patch moves gdbserver to the top level.
This patch is as close to a pure move as possible -- gdbserver still
builds its own variant of gnulib and gdbsupport. Changing this will
be done in a separate patch.
[v2] Note that, per Simon's review comment, this patch changes the
tree so that gdbserver is not built for or1k or score. This makes
sense, because there is apparently not actually a gdbserver port here.
[v3] This version of the patch also splits out some configury into a
new file, gdbserver/configure.host, so that the top-level configure
script can simply rely on it in order to decide whether gdbserver
should be built.
[v4] This version adds documentation and removes some unnecessary
top-level dependencies.
[v5] Update docs to mention "make all-gdbserver" and change how
top-level configure decides whether to build gdbserver, switching to a
single, shared script.
Tested by the buildbot.
ChangeLog
2020-02-07 Tom Tromey <tom@tromey.com>
Pedro Alves <palves@redhat.com>
* src-release.sh (GDB_SUPPORT_DIRS): Add gdbserver.
* gdbserver: New directory, moved from gdb/gdbserver.
* configure.ac (host_tools): Add gdbserver.
Only build gdbserver on certain systems.
* Makefile.in, configure: Rebuild.
* Makefile.def (host_modules, dependencies): Add gdbserver.
* MAINTAINERS: Add gdbserver.
gdb/ChangeLog
2020-02-07 Tom Tromey <tom@tromey.com>
* README: Update gdbserver documentation.
* gdbserver: Move to top level.
* configure.tgt (build_gdbserver): Remove.
* configure.ac: Remove --enable-gdbserver.
* configure: Rebuild.
* Makefile.in (distclean): Don't mention gdbserver.
Change-Id: I826b7565b54604711dc7a11edea0499cd51ff39e
The source_cache::ensure method may throw an exception through
the invocation of source_cache::get_plain_source_lines. This
happens when the source file is not found. The expected behaviour
of "ensure" is only returning "true" or "false" according to the
documentation in the header file.
So far, if gdb is in source layout and a file is missing, you see
some outputs like below:
,---------------------------------------------.
| test.c file is loaded in the source window. |
| |
| int main() |
| ... |
|---------------------------------------------|
| Remote debugging using :1234 |
| __start () at /path/to/crt0.S:141 |
| /path/to/crt0.S: No such file or directory. |
| (gdb) p/x $pc |
| $1 = 0x124 |
| (gdb) n |
| /path/to/crt0.S: No such file or directory. |
| (gdb) p/x $pc |
| $2 = 0x128 |
| (gdb) [pressing arrow-down key] |
| (gdb) terminate called after throwing an |
| instance of 'gdb_exception_error' |
`---------------------------------------------'
Other issues have been encountered as well [1].
The patch from Pedro [2] which is about preventing exceptions
from crossing the "readline" mitigates the situation by not
causing gdb crash, but still there are lots of errors printed:
,---------------------------------------------.
| test.c file is loaded in the source window. |
| |
| int main() |
| ... |
|---------------------------------------------|
| Remote debugging using :1234 |
| __start () at /path/to/crt0.S:141 |
| /path/to/crt0.S: No such file or directory. |
| (gdb) [pressing arrow-down key] |
| /path/to/crt0.S: No such file or directory. |
| (gdb) [pressing arrow-down key] |
| /path/to/crt0.S: No such file or directory. |
| (gdb) [pressing arrow-up key] |
| /path/to/crt0.S: No such file or directory. |
`---------------------------------------------'
With the changes of this patch, the behavior is like:
,---------------------------------------------.
| initially, source window is empty because |
| crt0.S is not found and according to the |
| program counter that is the piece of code |
| being executed. |
| |
| later, when we break at main (see commands |
| below), this window will be filled with the |
| the contents of test.c file. |
|---------------------------------------------|
| Remote debugging using :1234 |
| __start () at /path/to/crt0.S:141 |
| (gdb) p/x $pc |
| $1 = 0x124 |
| (gdb) n |
| (gdb) p/x $pc |
| $2 = 0x128 |
| (gdb) b main |
| Breakpoint 1 at 0x334: file test.c, line 8. |
| (gdb) cont |
| Continuing. |
| Breakpoint 1, main () at hello.c:8 |
| (gdb) n |
| (gdb) |
`---------------------------------------------'
There is no crash and the error message is completely
gone. Maybe it is good practice that the error is
shown inside the source window.
I tested this change against gdb.base/list-missing-source.exp
and there was no regression.
[1]
It has also been observed in the past that the register
values are not transferred from qemu's gdb stub, see:
https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/issues/226
[2]
https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=2f267673f0fdee9287e6d404ecd4f2d29da0d2f2
gdb/ChangeLog:
* source-cache.c (source_cache::ensure): Surround
get_plain_source_lines with a try/catch.
(source_cache::get_line_charpos): Get rid of try/catch
and only check for the return value of "ensure".
* tui/tui-source.c (tui_source_window::set_contents):
Simplify "nlines" calculation.
gdb/testsuite/ChangeLog:
* gdb.tui/tui-missing-src.exp: Add the "missing source
file" test for the TUI.
This was a typo introduced in f6ac5f3d63.
Found by looking through NetBSD's GDB patches:
https://github.com/NetBSD/pkgsrc-wip/blob/master/gdb-netbsd/patches/patch-gdb_sparc-nat.h
This patch can't be tested on Linux because Linux does not use the
sparc_target template.
gdb/ChangeLog:
2020-02-05 Christian Biesinger <cbiesinger@google.com>
* sparc-nat.h (struct sparc_target) <xfer_partial>: Fix base class
function call.
Change-Id: I4fa88cbdc365efe89b84cc0619b60db38718d9ce
Makes the comment match the macro name in the #define/#ifdef.
gdb/ChangeLog:
2020-02-05 Christian Biesinger <cbiesinger@google.com>
* ppc-nbsd-tdep.h: Fix macro name in #endif comment.
Change-Id: If7b2e49e65495b8eb9ed7b6c9a11277579a93a05
In preparation for RISC-V/Linux `gdbserver' support factor out parts of
native target description determination code that can be shared between
the programs.
gdb/
* nat/riscv-linux-tdesc.h: New file.
* nat/riscv-linux-tdesc.c: New file, taking code from...
* riscv-linux-nat.c (riscv_linux_nat_target::read_description):
... here.
* configure.nat <linux> <riscv*>: Add nat/riscv-linux-tdesc.o to
NATDEPFILES.
We assign the simulator inferior a fake ptid. If this ptid is ever
set to null_ptid then we are going to run into problems - the
simulator ptid is what we return from gdbsim_target::wait, and this in
turn is used to look up the inferior data with a call to
find_inferior_pid, which asserts the pid is not 0 (which it is in
null_pid).
This commit adds an assert that the simulator's fake pid is not
null_ptid. There should be no user visible changes after this commit.
gdb/ChangeLog:
* remote-sim.c (sim_inferior_data::sim_inferior_data): Assert that
we don't set the fake simulator ptid to the null_ptid.
Change-Id: I6e08effe70e70855aea13c9caf4fd6913d5af56d
In the function f77_print_array_1, the variable 'i' which holds the
index is of datatype 'int', while bounds are of datatype LONGEST. Due to
size of int being smaller than LONGEST, the variable 'i' stores
incorrect values for high indexes (higher than max limit of int). Due
to this issue in sources, two abnormal behaviors are seen while printing
arrays with high indexes (please check array-bounds-high.f90) For high
indexes with negative sign, gdb prints empty array even if the array has
elements.
(gdb) p arr
$1 = ()
For high indexes with positive sign, gdb crashes. We have now changed
the datatype of 'i' to LONGEST which is same as datatype of bounds.
gdb/ChangeLog:
* f-valprint.c (f77_print_array_1): Changed datatype of index
variable to LONGEST from int to enable it to contain bound
values correctly.
gdb/testsuite/ChangeLog:
* gdb.fortran/array-bounds-high.exp: New file.
* gdb.fortran/array-bounds-high.f90: New file.
Change-Id: Ie2dce9380a249e634e2684b9c90f225e104369b7
Fix RISC-V native Linux support to handle a 64-bit FPU (FLEN == 64) with
both RV32 and RV64 systems, which is a part of the current Linux ABI for
hard-float systems, rather than assuming that (FLEN == XLEN) in target
description determination and that (FLEN == 64) in register access.
We can do better however and not rely on any particular value of FLEN
and probe for it dynamically, by observing that the PTRACE_GETREGSET
ptrace(2) call will only accept an exact regset size, and that will
reflect FLEN. Therefore iterate over the call in target description
determination with a geometrically increasing regset size until a match
is marked by a successful ptrace(2) call completion or we run beyond the
maximum size we can support.
Update register accessors accordingly, using FLEN determined to size the
buffer used for NT_PRSTATUS requests and then to exchange data with the
regcache.
Also handle a glibc bug where ELF_NFPREG is defined in terms of NFPREG,
however NFPREG is nowhere defined.
gdb/
* riscv-linux-nat.c [!NFPREG] (NFPREG): New macro.
(supply_fpregset_regnum, fill_fpregset): Handle regset buffer
offsets according to FLEN determined.
(riscv_linux_nat_target::read_description): Determine FLEN
dynamically.
(riscv_linux_nat_target::fetch_registers): Size regset buffer
according to FLEN determined.
(riscv_linux_nat_target::store_registers): Likewise.
When the command "info registers" (same as "info registers general"),
is issued, _all_ the registers from a tdesc XML are printed. This
includes the registers with empty register groups (set as "") which
are supposed to be only printed by "info registers all" (or "info
all-registers").
This bug got introduced after all the overhauls that the
tdesc_register_in_reggroup_p() went through. You can see that the
logic of tdesc_register_in_reggroup_p() did NOT remain the same after
all those changes:
git difftool c9c895b9666..HEAD -- gdb/target-descriptions.c
With the current implementation, when the reg->group is an empty
string, this function returns -1, while in the working revision
(c9c895b966), it returned 0. This patch makes sure that the 0 is
returned again.
The old implementation of tdesc_register_in_reggroup_p() returned
-1 when "reggroup" was set to "all_reggroups" at line 4 below:
1 tdesc_register_reggroup_p (...)
2 {
3 ...
4 ret = tdesc_register_in_reggroup_p (gdbarch, regno, reggroup);
5 if (ret != -1)
6 return ret;
7
8 return default_register_reggroup_p (gdbarch, regno, reggroup);
9 }
As a result, the execution continued at line 8 and the
default_register_reggroup_p(..., reggroup=all_reggroups) would
return 1. However, with the current implementation of
tdesc_register_in_reggroup_p() that allows checking against any
arbitrary group name, it returns 0 when comparing the "reg->group"
against the string "all" which is the group name for "all_reggroups".
I have added a special check to cover this case and
"info all-registers" works as expected.
gdb/ChangeLog:
* target-descriptions.c (tdesc_register_in_reggroup_p): Return 0
when reg->group is empty and reggroup is not.
Change-Id: I9eaf9d7fb36410ed5684ae652fe4756b1b2e61a3
ravenscar-thread.c needed a change to adapt to multi-target:
ravenscar_thread_target::mourn_inferior called the mourn_inferior
method on the target beneat -- but when the target beneath was the
remote target, this resulted in the ravenscar target being deleted.
Switching the order of the calls to unpush_target and the beneath's
mourn_inferior fixes this problem.
gdb/ChangeLog
2020-01-31 Tom Tromey <tromey@adacore.com>
* ravenscar-thread.c (ravenscar_thread_target::mourn_inferior):
Call beneath target's mourn_inferior after unpushing.
Change-Id: Ia80380515c403adc40505a6b3420c9cb35754370
In TUI mode, if the disassembly output for the program is less than
one screen long, then currently if the user scrolls down until on the
last assembly instruction is displayed and then tries to scroll up
using Page-Up, the display doesn't update - they are stuck viewing the
last line.
If the user tries to scroll up using the Up-Arrow, then the display
scrolls normally.
What is happening is on the Page-Up we ask GDB to scroll backward the
same number of lines as the height of the TUI ASM window. The back
scanner, which looks for a good place to start disassembling, fails to
find a starting address which will provide the requested number of new
lines before we get back to the original starting address (which is
not surprising, our whole program contains less than a screen height
of instructions), as a result the back scanner gives up and returns
the original starting address.
When we scroll with Up-Arrow we only ask the back scanner to find 1
new instruction, which it manages to do, so this scroll works.
The solution here is, when we fail to find enough instructions, to
return the lowest address we did manage to find. This will ensure we
jump to the lowest possible address in the disassembly output.
gdb/ChangeLog:
PR tui/9765
* tui/tui-disasm.c (tui_find_disassembly_address): If we don't
have enough lines to fill the screen, still return the lowest
address we found.
gdb/testsuite/ChangeLog:
PR tui/9765
* gdb.tui/tui-layout-asm-short-prog.S: New file.
* gdb.tui/tui-layout-asm-short-prog.exp: New file.
Change-Id: I6a6a7972c68a0559e9717fd8d82870b669a40af3
GDB has some commands ('+', '-', '<', and '>') for scrolling the SRC
and ASM TUI windows from the CMD window, however the help text for
these commands lists the arguments in the wrong order.
This commit updates the help text to match how GDB actually works, and
also extends the text to describe what the arguments mean, and what
the defaults are.
There should be no change in GDBs functionality after this commit.
gdb/ChangeLog:
* tui/tui-win.c (_initialize_tui_win): Update help text for '+',
'-', '<', and '>' commands.
Change-Id: Ib2624891de1f4ba983838822206304e4c3ed982e
While testing a GCC 10 build of our git HEAD, Sergio noticed an error
triggered by -Werror-stringop on
infcmd.c:construct_inferior_arguments. One of the things the function
does is calculate the length of the string that will hold the
inferior's arguments. GCC warns us that 'length' can be 0, which can
lead to undesired behaviour:
../../gdb/infcmd.c: In function 'char* construct_inferior_arguments(int, char**)':
../../gdb/infcmd.c:369:17: error: writing 1 byte into a region of size 0 [-Werror=stringop-overflow=]
369 | result[0] = '\0';
| ~~~~~~~~~~^~~~~~
../../gdb/infcmd.c:368:33: note: at offset 0 to an object with size 0 allocated by 'xmalloc' here
368 | result = (char *) xmalloc (length);
| ~~~~~~~~^~~~~~~~
The solution here is to assert that 'argc' is greater than 0 on entry,
which makes GCC understand that the loops always run at least once,
and thus 'length' is always > 0.
Tested by rebuilding.
gdb/ChangeLog:
2020-01-29 Pedro Alves <palves@redhat.com>
Sergio Durigan Junior <sergiodj@redhat.com>
* infcmd.c (construct_inferior_arguments): Assert that
'argc' is greater than 0.
Change-Id: Ide8407cbedcb4921de1843a6a15bbcb7676c7d26
New in v3:
- Code cleanups based on reviews.
New in v2:
- Fixed misc problems based on reviews.
- Switched to using gdbarch_program_breakpoint_here_p as opposed to
gdbarch_insn_is_breakpoint.
- Fixed matching of brk instructions. Previously the mask was incorrect, which
was showing up as a few failures in the testsuite. Now it is clean.
- New testcase (separate patch).
- Moved program_breakpoint_here () to arch-utils.c and made it the default
implementation of gdbarch_program_breakpoint_here_p.
--
It was reported to me that program breakpoints (permanent ones inserted into
the code itself) other than the one GDB uses for AArch64 (0xd4200000) do not
generate visible stops when continuing, and GDB will continue spinning
infinitely.
This happens because GDB, upon hitting one of those program breakpoints, thinks
the SIGTRAP came from a delayed breakpoint hit...
(gdb) x/i $pc
=> 0x4005c0 <problem_function>: brk #0x90f
(gdb) c
Continuing.
infrun: clear_proceed_status_thread (process 14198)
infrun: proceed (addr=0xffffffffffffffff, signal=GDB_SIGNAL_DEFAULT)
infrun: proceed: resuming process 14198
infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [process 14198] at 0x4005c0
infrun: infrun_async(1)
infrun: prepare_to_wait
infrun: target_wait (-1.0.0, status) =
infrun: 14198.14198.0 [process 14198],
infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: handle_inferior_event status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: stop_pc = 0x4005c0
infrun: delayed software breakpoint trap, ignoring
infrun: no stepping, continue
infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [process 14198] at 0x4005c0
infrun: prepare_to_wait
infrun: target_wait (-1.0.0, status) =
infrun: 14198.14198.0 [process 14198],
infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: handle_inferior_event status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: stop_pc = 0x4005c0
infrun: delayed software breakpoint trap, ignoring
infrun: no stepping, continue
infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [process 14198] at 0x4005c0
infrun: prepare_to_wait
infrun: target_wait (-1.0.0, status) =
infrun: 14198.14198.0 [process 14198],
infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: handle_inferior_event status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: stop_pc = 0x4005c0
infrun: delayed software breakpoint trap, ignoring
infrun: no stepping, continue
infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [process 14198] at 0x4005c0
infrun: prepare_to_wait
infrun: target_wait (-1.0.0, status) =
infrun: 14198.14198.0 [process 14198],
infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: handle_inferior_event status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: stop_pc = 0x4005c0
infrun: delayed software breakpoint trap, ignoring
infrun: no stepping, continue
infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [process 14198] at 0x4005c0
infrun: prepare_to_wait
infrun: target_wait (-1.0.0, status) =
infrun: 14198.14198.0 [process 14198],
infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP
...
... which is not the case.
If the program breakpoint is one GDB recognizes, then it will stop when it
hits it.
(gdb) x/i $pc
=> 0x4005c0 <problem_function>: brk #0x0
(gdb) c
Continuing.
infrun: clear_proceed_status_thread (process 14193)
infrun: proceed (addr=0xffffffffffffffff, signal=GDB_SIGNAL_DEFAULT)
infrun: proceed: resuming process 14193
infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [process 14193] at 0x4005c0
infrun: infrun_async(1)
infrun: prepare_to_wait
infrun: target_wait (-1.0.0, status) =
infrun: 14193.14193.0 [process 14193],
infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: handle_inferior_event status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: stop_pc = 0x4005c0
infrun: random signal (GDB_SIGNAL_TRAP)
infrun: stop_waiting
infrun: stop_all_threads
infrun: stop_all_threads, pass=0, iterations=0
infrun: process 14193 not executing
infrun: stop_all_threads, pass=1, iterations=1
infrun: process 14193 not executing
infrun: stop_all_threads done
Program received signal SIGTRAP, Trace/breakpoint trap.
problem_function () at brk_0.c:7
7 asm("brk %0\n\t" ::"n"(0x0));
infrun: infrun_async(0)
Otherwise GDB will keep trying to resume the inferior and will keep
seeing the SIGTRAP's, without stopping.
To the user it appears GDB has gone into an infinite loop, interruptible only
by Ctrl-C.
Also, windbg seems to use a different variation of AArch64 breakpoint compared
to GDB. This causes problems when debugging Windows on ARM binaries, when
program breakpoints are being used.
The proposed patch creates a new gdbarch method (gdbarch_program_breakpoint_here_p)
that tells GDB whether the underlying instruction is a breakpoint instruction
or not.
This is more general than only checking for the instruction GDB uses as
breakpoint.
The existing logic is still preserved for targets that do not implement this
new gdbarch method.
The end result is like so:
(gdb) x/i $pc
=> 0x4005c0 <problem_function>: brk #0x90f
(gdb) c
Continuing.
infrun: clear_proceed_status_thread (process 16417)
infrun: proceed (addr=0xffffffffffffffff, signal=GDB_SIGNAL_DEFAULT)
infrun: proceed: resuming process 16417
infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [process 16417] at 0x4005c0
infrun: infrun_async(1)
infrun: prepare_to_wait
infrun: target_wait (-1.0.0, status) =
infrun: 16417.16417.0 [process 16417],
infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: handle_inferior_event status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: stop_pc = 0x4005c0
infrun: random signal (GDB_SIGNAL_TRAP)
infrun: stop_waiting
infrun: stop_all_threads
infrun: stop_all_threads, pass=0, iterations=0
infrun: process 16417 not executing
infrun: stop_all_threads, pass=1, iterations=1
infrun: process 16417 not executing
infrun: stop_all_threads done
Program received signal SIGTRAP, Trace/breakpoint trap.
problem_function () at brk.c:7
7 asm("brk %0\n\t" ::"n"(0x900 + 0xf));
infrun: infrun_async(0)
gdb/ChangeLog:
2020-01-29 Luis Machado <luis.machado@linaro.org>
* aarch64-tdep.c (BRK_INSN_MASK): Define to 0xffe0001f.
(BRK_INSN_MASK): Define to 0xd4200000.
(aarch64_program_breakpoint_here_p): New function.
(aarch64_gdbarch_init): Set gdbarch_program_breakpoint_here_p hook.
* arch-utils.c (default_program_breakpoint_here_p): Moved from
breakpoint.c.
* arch-utils.h (default_program_breakpoint_here_p): Moved from
breakpoint.h
* breakpoint.c (bp_loc_is_permanent): Changed return type to bool and
call gdbarch_program_breakpoint_here_p.
(program_breakpoint_here): Moved to arch-utils.c, renamed to
default_program_breakpoint_here_p, changed return type to bool and
simplified.
* breakpoint.h (program_breakpoint_here): Moved prototype to
arch-utils.h, renamed to default_program_breakpoint_here_p and changed
return type to bool.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
* gdbarch.sh (program_breakpoint_here_p): New method.
* infrun.c (handle_signal_stop): Call
gdbarch_program_breakpoint_here_p.
I noticed a couple of minor issues in ctfread.c, both fixed by this
patch:
* ctf_fp_info was not indented properly; and
* _initialize_ctfread is no longer needed
gdb/ChangeLog
2020-01-26 Tom Tromey <tom@tromey.com>
* ctfread.c (struct ctf_fp_info): Reindent.
(_initialize_ctfread): Remove.
Change-Id: I72707b74bc59e6e426b3a7bc8843d96c0d786f1e
This patch removes the "readin" and "compunit_symtab" members from
partial_symtab, replacing them with methods. Then it introduces a new
"standard_psymtab" class, which restores these members; and changes
the symbol readers to use this intermediate class as the base class of
their partial symtab subclasses.
The reason for this is to make it possible for a symbol reader to
implement an alternate mapping between partial and full symbol tables.
This is important in order to be able to share psymtabs across
objfiles -- whether a psymtab has been "readin" is objfile-dependent,
as are the pointers to the full symbol tables.
gdb/ChangeLog
2020-01-26 Tom Tromey <tom@tromey.com>
* psymtab.c (partial_map_expand_apply)
(psym_find_pc_sect_compunit_symtab, psym_lookup_symbol)
(psymtab_to_symtab, psym_find_last_source_symtab, dump_psymtab)
(psym_print_stats, psym_expand_symtabs_for_function)
(psym_map_symbol_filenames, psym_map_matching_symbols)
(psym_expand_symtabs_matching)
(partial_symtab::read_dependencies, maintenance_info_psymtabs)
(maintenance_check_psymtabs): Use new methods.
* psympriv.h (struct partial_symtab) <readin_p,
get_compunit_symtab>: New methods.
<readin, compunit_symtab>: Remove members.
(struct standard_psymtab): New.
(struct legacy_psymtab): Derive from standard_psymtab.
* dwarf2read.h (struct dwarf2_psymtab): Derive from
standard_psymtab.
* ctfread.c (struct ctf_psymtab): Derive from standard_psymtab.
Change-Id: Idb923f196d7e03bf7cb9cfc8134ed06dd3f211ce
Most of the symbol readers have code to iterate over a partial symtabs
dependencies, expanding each one and optionally printing a message.
Now that the "second-stage" psymtab expansion is available as a
method, these implementations can all be merged.
This patch also changes a couple more warnings into assertions.
gdb/ChangeLog
2020-01-26 Tom Tromey <tom@tromey.com>
* xcoffread.c (xcoff_psymtab_to_symtab_1): Call
read_dependencies. Add assert.
* psymtab.c (partial_symtab::read_dependencies): New method.
* psympriv.h (struct partial_symtab) <read_dependencies>: New
method.
* mdebugread.c (psymtab_to_symtab_1): Call read_dependencies.
* dwarf2read.c (dwarf2_psymtab::expand_psymtab): Call
read_dependencies.
* dbxread.c (dbx_psymtab_to_symtab_1): Call read_dependencies.
Add assert.
Change-Id: I8151e05677794e90223edc1a4cb70f7f69137d46
The symbol readers generally used two functions to expand a partial
symtab: an outer function (now the "read_symtab" method), and an inner
function, typically named something like "psymtab_to_symtab".
This patch changes this second step to be a method on partial_symtab,
and updates all the callers. For legacy_psymtab, a new function
pointer member is introduced.
This patch enables a subsequent cleanup.
gdb/ChangeLog
2020-01-26 Tom Tromey <tom@tromey.com>
* xcoffread.c (xcoff_psymtab_to_symtab_1): Change argument order.
Call expand_psymtab.
(xcoff_read_symtab): Call expand_psymtab.
(xcoff_start_psymtab, xcoff_end_psymtab): Set
legacy_expand_psymtab.
* psympriv.h (struct partial_symtab) <expand_psymtab>: New
method.
(struct legacy_psymtab) <expand_psymtab>: Implement.
<legacy_expand_psymtab>: New member.
* mdebugread.c (mdebug_read_symtab): Call expand_psymtab.
(parse_partial_symbols): Set legacy_expand_psymtab.
(psymtab_to_symtab_1): Change argument order. Call
expand_psymtab.
(new_psymtab): Set legacy_expand_psymtab.
* dwarf2read.h (struct dwarf2_psymtab) <expand_psymtab>: Declare.
* dwarf2read.c (dwarf2_psymtab::read_symtab): Call
expand_psymtab.
(dwarf2_psymtab::expand_psymtab): Rename from
psymtab_to_symtab_1. Call expand_psymtab.
* dbxread.c (start_psymtab): Set legacy_expand_psymtab.
(dbx_end_psymtab): Likewise.
(dbx_psymtab_to_symtab_1): Change argument order. Call
expand_psymtab.
(dbx_read_symtab): Call expand_psymtab.
* ctfread.c (struct ctf_psymtab) <expand_psymtab>: Declare.
(ctf_psymtab::expand_psymtab): Rename from psymtab_to_symtab.
(ctf_psymtab::read_symtab): Call expand_psymtab.
Change-Id: Ic39a2d7aa7b424088d910b59dbd21271fa1c3430
Each symbol reader implemented its own "Reading..." messages, and most
of them double-checked that a previously-expanded psymtab could not be
re-read.
This patch consolidates the message-printing, and changes these checks
into asserts.
gdb/ChangeLog
2020-01-26 Tom Tromey <tom@tromey.com>
* xcoffread.c (xcoff_read_symtab): Remove prints. Add assert.
* psymtab.c (psymtab_to_symtab): Print verbose "Reading"
messages.
* mdebugread.c (mdebug_read_symtab): Remove prints.
* dwarf2read.c (dwarf2_psymtab::read_symtab): Remove prints. Add
assert.
* dbxread.c (dbx_read_symtab): Remove prints. Add assert.
Change-Id: I795be9710d42708299bb7b44972cffd27aec9413
This introduces a new partial_symtab::read_symtab method, and updates
the symbol readers to subclass partial_symtab and implement this
method. The old read_symtab and read_symtab_private members are
removed.
In practice, only DWARF and CTF are truly updated to take advantage of
the new setup. The other symbol readers are less actively maintained,
and so this patch also introduces a "legacy_psymtab", which
essentially works the same way as the old partial_symtab.
(Note that, without more knowledge of the interaction between these
symbol readers, fixing this to remove the new (small) overhead is not
trivial, because these readers copy the read_symtab pointer between
partial symtabs.)
gdb/ChangeLog
2020-01-26 Tom Tromey <tom@tromey.com>
* xcoffread.c (this_symtab_psymtab, read_xcoff_symtab)
(xcoff_psymtab_to_symtab_1, xcoff_read_symtab)
(xcoff_start_psymtab, xcoff_end_psymtab, scan_xcoff_symtab): Use
legacy_symtab.
* stabsread.h (dbx_end_psymtab): Use legacy_symtab.
* psymtab.c (psymtab_to_symtab): Call method.
(dump_psymtab): Update.
* psympriv.h (struct partial_symtab): Add virtual destructor.
<read_symtab>: New method.
(struct legacy_symtab): New.
* mdebugread.c (mdebug_read_symtab): Use legacy_psymtab.
(struct pst_map) <pst>: Now a legacy_psymtab.
(parse_procedure, parse_partial_symbols, psymtab_to_symtab_1)
(new_psymtab): Use legacy_psymtab.
* dwarf2read.h (struct dwarf2_psymtab): New.
(struct dwarf2_per_cu_data) <psymtab>: Use it.
* dwarf2read.c (dwarf2_create_include_psymtab)
(dwarf2_build_include_psymtabs, create_type_unit_group)
(create_partial_symtab, process_psymtab_comp_unit_reader)
(build_type_psymtabs_reader, build_type_psymtab_dependencies)
(set_partial_user): Use dwarf2_psymtab.
(dwarf2_psymtab::read_symtab): Rename from dwarf2_read_symtab.
(psymtab_to_symtab_1, process_full_comp_unit)
(process_full_type_unit, dwarf2_ranges_read)
(dwarf2_get_pc_bounds, psymtab_include_file_name)
(dwarf_decode_lines): Use dwarf2_psymtab.
* dwarf-index-write.c (psym_index_map): Use dwarf2_psymtab.
(add_address_entry_worker, write_one_signatured_type)
(recursively_count_psymbols, recursively_write_psymbols)
(write_one_signatured_type, psyms_seen_size, write_gdbindex)
(write_debug_names): Likewise.
* dbxread.c (struct header_file_location): Take a legacy_psymtab.
<pst>: Now a legacy_psymtab.
(find_corresponding_bincl_psymtab): Return a legacy_psymtab.
(read_dbx_symtab, start_psymtab, dbx_end_psymtab)
(dbx_psymtab_to_symtab_1, read_ofile_symtab): Use legacy_psymtab.
* ctfread.c (struct ctf_psymtab): New.
(ctf_start_symtab, ctf_end_symtab, psymtab_to_symtab): Take a
ctf_psymtab.
(ctf_psymtab::read_symtab): Rename from ctf_read_symtab.
(create_partial_symtab): Return a ctf_psymtab.
(scan_partial_symbols): Update.
Change-Id: Ia57a828786867d6ad03200af8f996f48ed15285e
This turns start_psymtab_common into a constructor, and then changes
the callers to use "new" directly. This completes the psymtab
allocation transition -- now it is possible for symbol readers to
subclass struct partial_symtab.
gdb/ChangeLog
2020-01-26 Tom Tromey <tom@tromey.com>
* xcoffread.c (xcoff_start_psymtab): Use new.
* psymtab.c (partial_symtab::partial_symtab): New constructor,
renamed from start_psymtab_common.
* psympriv.h (struct partial_symtab): Add new constructor.
(start_psymtab_common): Don't declare.
* mdebugread.c (parse_partial_symbols): Use new.
* dwarf2read.c (create_partial_symtab): Use new.
* dbxread.c (start_psymtab): Use new.
* ctfread.c (create_partial_symtab): Use new.
Change-Id: I5a0217bcb52bcfa442559771954bb66bd9ccbf02
This is the next step in getting the symbol readers to allocate
psymtabs themselves: change allocate_psymtab to be an ordinary
constructor, and then use "new" at the previous call sites. Note that
this doesn't get us all the way -- start_psymtab_common is still
allocating a partial symtab.
gdb/ChangeLog
2020-01-26 Tom Tromey <tom@tromey.com>
* xcoffread.c (xcoff_end_psymtab): Use new.
* psymtab.c (start_psymtab_common): Use new.
(partial_symtab::partial_symtab): Rename from allocate_psymtab.
Update.
* psympriv.h (struct partial_symtab): Add parameters to
constructor. Don't inline.
(allocate_psymtab): Don't declare.
* mdebugread.c (new_psymtab): Use new.
* dwarf2read.c (dwarf2_create_include_psymtab): Use new.
* dbxread.c (dbx_end_psymtab): Use new.
Change-Id: Iffeae64c925050b90b9916cbc36e15b26ff42226
Currently, partial symbol tables are allocated by a method in
psymtab_storage. However, eventually we want to subclass partial
symtabs in the symbol readers, so the calls to "new" will have to
happen there. This patch is a first step, moving the allocation from
psymtab_storage and into allocate_psymtab.
gdb/ChangeLog
2020-01-26 Tom Tromey <tom@tromey.com>
* psymtab.h (class psymtab_storage) <install_psymtab>: Rename from
allocate_psymtab. Update documentation.
* psymtab.c (psymtab_storage::install_psymtab): Rename from
allocate_psymtab. Do not use new.
(allocate_psymtab): Use new. Update.
Change-Id: Iba6a9bf3ee1e78062fdb9f007c3010f826f64bc8
This changes psymtabs to be allocated with new and destroyed with
delete. As a consequence, the psymtab free-list is also removed.
The motivation for this is to let symbol readers subclass
partial_symtab.
gdb/ChangeLog
2020-01-26 Tom Tromey <tom@tromey.com>
* mdebugread.c (parse_partial_symbols): Use discard_psymtab.
* psymtab.h (class psymtab_storage) <free_psymtabs>: Remove.
* psymtab.c (psymtab_storage): Delete psymtabs.
(psymtab_storage::allocate_psymtab): Use new.
(psymtab_storage::discard_psymtab): Use delete.
* psympriv.h (struct partial_symtab): Add constructor and
initializers.
Change-Id: I4e78ac538fc0ea52b57489c1afb8f935a30941ef
machoread.c does not need to include psympriv.h.
gdb/ChangeLog
2020-01-26 Tom Tromey <tom@tromey.com>
* machoread.c: Do not include psympriv.h.
Change-Id: I6362bd2e95e7416cb9bae3d48b69dd6dbe4f2cc8
Mention in NEWS the new option and the set/show commands.
Document in gdb.texinfo the new option and the set/show commands.
gdb/ChangeLog
2020-01-25 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* NEWS: Mention the new option and the set/show commands.
gdb/doc/ChangeLog
2020-01-25 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.texinfo (Attach): Document the new option and the
set/show commands.
(Connecting): Reference the exec-file-mismatch option.
This option allows to tell GDB to detect and possibly handle mismatched exec-files.
A recurrent problem with GDB is that GDB uses the wrong exec-file
when using the attach/detach commands successively.
Also, in case the user specifies a file on the command line but attaches
to the wrong PID, this error is not made visible and gives a not user
understandable behaviour.
For example:
$ gdb
...
(gdb) atta 2682 ############################################ PID running 'sleepers' executable
Attaching to process 2682
[New LWP 2683]
[New LWP 2684]
[New LWP 2685]
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
0x00007f5ff829f603 in select () at ../sysdeps/unix/syscall-template.S:84
84 ../sysdeps/unix/syscall-template.S: No such file or directory.
(gdb) det
Detaching from program: /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers, process 2682
[Inferior 1 (process 2682) detached]
(gdb) atta 31069 ############################################ PID running 'gdb' executable
Attaching to program: /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers, process 31069
Reading symbols from /lib64/ld-linux-x86-64.so.2...
Reading symbols from /usr/lib/debug/.build-id/60/6df9c355103e82140d513bc7a25a635591c153.debug...
0x00007f43c23478a0 in ?? ()
(gdb) bt
#0 0x00007f43c23478a0 in ?? ()
#1 0x0000558909e3ad91 in ?? ()
#2 0x0000202962646700 in ?? ()
#3 0x00007ffc69c74e70 in ?? ()
#4 0x000055890c1d2350 in ?? ()
#5 0x0000000000000000 in ?? ()
(gdb)
The second attach has kept the executable of the first attach.
(in this case, 31069 is the PID of a GDB, that has nothing to do
with the first determined 'sleepers' executable).
Similarly, if specifying an executable, but attaching to a wrong pid,
we get:
gdb /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers
...
Reading symbols from /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers...
(gdb) atta 31069 ############################################ PID running 'gdb' executable
Attaching to program: /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers, process 31069
Reading symbols from /lib64/ld-linux-x86-64.so.2...
Reading symbols from /usr/lib/debug/.build-id/60/6df9c355103e82140d513bc7a25a635591c153.debug...
0x00007f43c23478a0 in ?? ()
(gdb) bt
#0 0x00007f43c23478a0 in ?? ()
#1 0x0000558909e3ad91 in ?? ()
#2 0x0000202962646700 in ?? ()
#3 0x00007ffc69c74e70 in ?? ()
#4 0x000055890c1d2350 in ?? ()
#5 0x0000000000000000 in ?? ()
(gdb)
And it is unclear to the user what has happened/what is going wrong.
This patch series implements a new option:
(gdb) apropos exec-file-mismatch
set exec-file-mismatch -- Set exec-file-mismatch handling (ask|warn|off).
show exec-file-mismatch -- Show exec-file-mismatch handling (ask|warn|off).
(gdb) help set exec-file-mismatch
Set exec-file-mismatch handling (ask|warn|off).
Specifies how to handle a mismatch between the current exec-file name
loaded by GDB and the exec-file name automatically determined when attaching
to a process:
ask - warn the user and ask whether to load the determined exec-file.
warn - warn the user, but do not change the exec-file.
off - do not check for mismatch.
"ask" means: in case of mismatch between the current exec-file name
and the automatically determined exec-file name of the PID we are attaching to,
give a warning to the user and ask whether to load the automatically determined
exec-file.
"warn" means: in case of mismatch, just give a warning to the user.
"off" means: do not check for mismatch.
This fixes PR gdb/17626.
There was a previous trial to fix this PR.
See https://sourceware.org/ml/gdb-patches/2015-07/msg00118.html
This trial was however only fixing the problem for the automatically
determined executable files when doing attach.
It was differentiating the 'user specified executable files' ("sticky")
from the executable files automatically found by GDB.
But such user specified sticky executables are in most cases due
to a wrong manipulation by the user, giving unexpected results
such as backtrace showing no function like in the above example.
This patch ensures that whenever a process executable can be
determined, that the user is warned if there is a mismatch.
The same tests as above then give:
(gdb) atta 2682
Attaching to process 2682
[New LWP 2683]
[New LWP 2684]
[New LWP 2685]
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
0x00007f5ff829f603 in select () at ../sysdeps/unix/syscall-template.S:84
84 ../sysdeps/unix/syscall-template.S: No such file or directory.
(gdb) det
Detaching from program: /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers, process 2682
[Inferior 1 (process 2682) detached]
(gdb) atta 31069
Attaching to program: /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers, process 31069
warning: Mismatch between current exec-file /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers
and automatically determined exec-file /bd/home/philippe/gdb/git/build_fixes/gdb/gdb
exec-file-mismatch handling is currently "ask"
Load new symbol table from "/bd/home/philippe/gdb/git/build_fixes/gdb/gdb"? (y or n) y
Reading symbols from /bd/home/philippe/gdb/git/build_fixes/gdb/gdb...
Setting up the environment for debugging gdb.
...
Reading symbols from /usr/lib/debug/.build-id/60/6df9c355103e82140d513bc7a25a635591c153.debug...
0x00007f43c23478a0 in __poll_nocancel () at ../sysdeps/unix/syscall-template.S:84
84 ../sysdeps/unix/syscall-template.S: No such file or directory.
(top-gdb) bt
During symbol reading: incomplete CFI data; unspecified registers (e.g., rax) at 0x7f43c23478ad
During symbol reading: unsupported tag: 'DW_TAG_unspecified_type'
During symbol reading: cannot get low and high bounds for subprogram DIE at 0x12282a7
During symbol reading: Child DIE 0x12288ba and its abstract origin 0x1228b26 have different parents
During symbol reading: DW_AT_call_target target DIE has invalid low pc, for referencing DIE 0x1229540 [in module /bd/home/philippe/gdb/git/build_fixes/gdb/gdb]
#0 0x00007f43c23478a0 in __poll_nocancel () at ../sysdeps/unix/syscall-template.S:84
#1 0x0000558909e3ad91 in poll (__timeout=-1, __nfds=<optimized out>, __fds=<optimized out>) at /usr/include/x86_64-linux-gnu/bits/poll2.h:46
#2 gdb_wait_for_event (block=block@entry=1) at ../../fixes/gdb/event-loop.c:772
#3 0x0000558909e3aef4 in gdb_do_one_event () at ../../fixes/gdb/event-loop.c:347
#4 0x0000558909e3b085 in gdb_do_one_event () at ../../fixes/gdb/common/common-exceptions.h:219
#5 start_event_loop () at ../../fixes/gdb/event-loop.c:371
During symbol reading: Member function "~_Sp_counted_base" (offset 0x1c69bf7) is virtual but the vtable offset is not specified
During symbol reading: Multiple children of DIE 0x1c8f5a0 refer to DIE 0x1c8f0ee as their abstract origin
#6 0x0000558909ed3b78 in captured_command_loop () at ../../fixes/gdb/main.c:331
#7 0x0000558909ed4b6d in captured_main (data=<optimized out>) at ../../fixes/gdb/main.c:1174
#8 gdb_main (args=<optimized out>) at ../../fixes/gdb/main.c:1190
#9 0x0000558909c1e9a8 in main (argc=<optimized out>, argv=<optimized out>) at ../../fixes/gdb/gdb.c:32
(top-gdb)
gdb /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers
...
Reading symbols from /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers...
(gdb) atta 31069
Attaching to program: /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers, process 31069
warning: Mismatch between current exec-file /home/philippe/valgrind/git/trunk_untouched/gdbserver_tests/sleepers
and automatically determined exec-file /bd/home/philippe/gdb/git/build_fixes/gdb/gdb
exec-file-mismatch handling is currently "ask"
Load new symbol table from "/bd/home/philippe/gdb/git/build_fixes/gdb/gdb"? (y or n) y
Reading symbols from /bd/home/philippe/gdb/git/build_fixes/gdb/gdb...
Setting up the environment for debugging gdb.
....
In other words, it now works as intuitively expected by the user.
If ever the user gave the correct executable on the command line,
then attached to the wrong pid, then confirmed loading the wrong executable,
the user can simply fix this by detaching, and attaching to the correct pid,
GDB will then tell again to the user that the exec-file might better
be loaded.
The default value of "ask" is chosen instead of e.g. "warn" as in most
cases, switching of executable will be the correct action,
and in any case, the user can decide to not load the executable,
as GDB asks a confirmation to the user to load the new executable.
For settings "ask" and "warn", the new function validate_exec_file ()
tries to get the inferior pid exec file and compares it with the current
exec file. In case of mismatch, it warns the user and optionally load
the executable.
This function is called in the attach_command implementation to cover
most cases of attaching to a running process.
It must also be called in remote.c, as the attach command is not supported
for all types of remote gdbserver.
gdb/ChangeLog
2020-01-25 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* exec.c (exec_file_mismatch_names, exec_file_mismatch_mode)
(show_exec_file_mismatch_command, set_exec_file_mismatch_command)
(validate_exec_file): New variables, enums, functions.
(exec_file_locate_attach, print_section_info): Style the filenames.
(_initialize_exec): Install show_exec_file_mismatch_command and
set_exec_file_mismatch_command.
* gdbcore.h (validate_exec_file): Declare.
* infcmd.c (attach_command): Call validate_exec_file.
* remote.c ( remote_target::remote_add_inferior): Likewise.
This commit improves GDB's handling of inline functions when there are
more than one inline function in a stack, so for example if we have a
stack like:
main -> aaa -> bbb -> ccc -> ddd
And aaa, bbb, and ccc are all inline within main GDB should (when
given sufficient debug information) be able to step from main through
aaa, bbb, and ccc. Unfortunately, this currently doesn't work, here's
an example session:
(gdb) start
Temporary breakpoint 1 at 0x4003b0: file test.c, line 38.
Starting program: /project/gdb/tests/inline/test
Temporary breakpoint 1, main () at test.c:38
38 global_var = 0;
(gdb) step
39 return aaa () + 1;
(gdb) step
aaa () at test.c:39
39 return aaa () + 1;
(gdb) step
bbb () at test.c:39
39 return aaa () + 1;
(gdb) step
ccc () at test.c:39
39 return aaa () + 1;
(gdb) step
ddd () at test.c:32
32 return global_var;
(gdb) bt
#0 ddd () at test.c:32
#1 0x00000000004003c1 in ccc () at test.c:39
#2 bbb () at test.c:26
#3 aaa () at test.c:14
#4 main () at test.c:39
Notice that once we get to line 39 in main, GDB keeps reporting line
39 in main as the location despite understanding that the inferior is
stepping through the nested inline functions with each use of step.
The problem is that as soon as the inferior stops we call
skip_inline_frames (from inline-frame.c) which calculates the
inferiors current state in relation to inline functions - it figures
out if we're in an inline function, and if we are counts how many
inline frames there are at the current location.
So, in our example above, when we step from line 38 in main to line 39
we stop at a location that is simultaneously in all of main, aaa, bbb,
and ccc. The block structure reflects the order in which the
functions would be called, with ccc being the most inner block and
main being the most outer block. When we stop GDB naturally finds the
block for ccc, however within skip_inline_frames we spot that bbb,
aaa, and main are super-blocks of the current location and that each
layer represents an inline function. The skip_inline_frames then
records the depth of inline functions (3 in this case for aaa, bbb,
and ccc) and also the symbol of the outermost inline function (in this
case 'aaa' as main isn't an inline function, it just has things inline
within it).
Now GDB understands the stack to be main -> aaa -> bbb -> ccc,
however, the state initialised in skip_inline_frames starts off
indicating that we should hide 3 frames from the user, so we report
that we're in main at line 39. The location of main, line 39 is
derived by asking the inline function state for the last symbol in the
stack (aaa in this case), and then asking for it's location - the
location of an inlined function symbol is its call site, so main, line
39 in this case.
If the user then asks GDB to step we don't actually move the inferior
at all, instead we spot that we are in an inline function stack,
lookup the inline state data, and reduce the skip depth by 1. We then
report to the user that GDB has stopped. GDB now understands that we
are in 'aaa'. In order to get the precise location we again ask GDB
for the last symbol from the inline data structure, and we are again
told 'aaa', we then get the location from 'aaa', and report that we
are in main, line 39.
Hopefully it's clear what the mistake here is, once we've reduced the
inline skip depth we should not be using 'aaa' to compute the precise
location, instead we should be using 'bbb'. That is what this patch
does.
Now, when we call skip_inline_frames instead of just recording the
last skipped symbol we now record all symbols in the inline frame
stack. When we ask GDB for the last skipped symbol we return a symbol
based on how many frames we are skipping, not just the last know
symbol.
With this fix in place, the same session as above now looks much
better:
(gdb) start
Temporary breakpoint 1 at 0x4003b0: file test.c, line 38.
Starting program: /project/gdb/tests/inline/test
Temporary breakpoint 1, main () at test.c:38
38 global_var = 0;
(gdb) s
39 return aaa () + 1;
(gdb) s
aaa () at test.c:14
14 return bbb () + 1;
(gdb) s
bbb () at test.c:26
26 return ccc () + 1;
(gdb) s
ccc () at test.c:20
20 return ddd () + 1;
(gdb) s
ddd () at test.c:32
32 return global_var;
(gdb) bt
#0 ddd () at test.c:32
#1 0x00000000004003c1 in ccc () at test.c:20
#2 bbb () at test.c:26
#3 aaa () at test.c:14
#4 main () at test.c:39
gdb/ChangeLog:
* frame.c (find_frame_sal): Move call to get_next_frame into more
inner scope.
* inline-frame.c (inilne_state) <inline_state>: Update argument
types.
(inilne_state) <skipped_symbol>: Rename to...
(inilne_state) <skipped_symbols>: ...this, and change to a vector.
(skip_inline_frames): Build vector of skipped symbols and use this
to reate the inline_state.
(inline_skipped_symbol): Add a comment and some assertions, fetch
skipped symbol from the list.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/dw2-inline-many-frames.c: New file.
* gdb.dwarf2/dw2-inline-many-frames.exp: New file.
Change-Id: I99def5ffb44eb9e58cda4b449bf3d91ab0386c62
Don't reorder line table entries for the same address when sorting the
line table, maintain the compiler given line order. Usually this will
reflect the order in which lines are conceptually encountered at a
given address.
Consider this example:
/* 1 */ volatile int global_var;
/* 2 */ int __attribute__ ((noinline))
/* 3 */ bar ()
/* 4 */ {
/* 5 */ return global_var;
/* 6 */ }
/* 7 */ static inline int __attribute__ ((always_inline))
/* 8 */ foo ()
/* 9 */ {
/* 10 */ return bar ();
/* 11 */ }
/* 12 */ int
/* 13 */ main ()
/* 14 */ {
/* 15 */ global_var = 0;
/* 16 */ return foo ();
/* 17 */ }
GCC 10 currently generates a line table like this (as shown by
objdump):
CU: ./test.c:
File name Line number Starting address
test.c 4 0x4004b0
test.c 5 0x4004b0
test.c 6 0x4004b6
test.c 6 0x4004b7
test.c 14 0x4003b0
test.c 15 0x4003b0
test.c 16 0x4003ba
test.c 10 0x4003ba
test.c 10 0x4003c1
The interesting entries are those for lines 16 and 10 at address
0x4003ba, these represent the call to foo and the inlined body of
foo.
With the current line table sorting GDB builds the line table like
this (as shown by 'maintenance info line-table'):
INDEX LINE ADDRESS
0 14 0x00000000004003b0
1 15 0x00000000004003b0
2 10 0x00000000004003ba
3 16 0x00000000004003ba
4 END 0x00000000004003c1
5 4 0x00000000004004b0
6 5 0x00000000004004b0
7 END 0x00000000004004b7
Notice that entries 2 and 3 for lines 10 and 16 are now in a different
order to the line table as given by the compiler. With this patch
applied the order is now:
INDEX LINE ADDRESS
0 14 0x00000000004003b0
1 15 0x00000000004003b0
2 16 0x00000000004003ba
3 10 0x00000000004003ba
4 END 0x00000000004003c1
5 4 0x00000000004004b0
6 5 0x00000000004004b0
7 END 0x00000000004004b7
Notice that entries 2 and 3 are now in their original order again.
The consequence of the incorrect ordering is that when stepping
through inlined functions GDB will display the wrong line for the
inner most frame. Here's a GDB session before this patch is applied:
Starting program: /home/andrew/tmp/inline/test
Temporary breakpoint 1, main () at test.c:15
15 /* 15 */ global_var = 0;
(gdb) step
16 /* 16 */ return foo ();
(gdb) step
foo () at test.c:16
16 /* 16 */ return foo ();
(gdb) step
bar () at test.c:5
5 /* 5 */ return global_var;
The step from line 15 to 16 was fine, but the next step should have
taken us to line 10, instead we are left at line 16. The final step
to line 5 is as expected.
With this patch applied the session goes better:
Starting program: /home/andrew/tmp/inline/test
Temporary breakpoint 1, main () at test.c:15
15 /* 15 */ global_var = 0;
(gdb) step
16 /* 16 */ return foo ();
(gdb) step
foo () at test.c:10
10 /* 10 */ return bar ();
(gdb) step
bar () at test.c:5
5 /* 5 */ return global_var;
We now visit the lines as 15, 16, 10, 5 as we would like.
The reason for this issue is that the inline frame unwinder is
detecting that foo is inlined in main. When we stop at the shared
address 0x4003ba the inline frame unwinder first shows us the outer
frame, this information is extracted from the DWARF's
DW_TAG_inlined_subroutine entries and passed via GDB's block data.
When we step again the inlined frame unwinder moves us up the call
stack to the inner most frame at which point the frame is displayed as
normal, with the location for the address being looked up in the line
table.
As GDB uses the last line table entry for an address as "the" line to
report for that address it is critical that GDB maintain the order of
the line table entries. In the first case, by reordering the line
table we report the wrong location.
I had to make a small adjustment in find_pc_sect_line in order to
correctly find the previous line in the line table. In some line
tables I was seeing an actual line entry and an end of sequence marker
at the same address, before this commit these would reorder to move
the end of sequence marker before the line entry (end of sequence has
line number 0). Now the end of sequence marker remains in its correct
location, and in order to find a previous line we should step backward
over any end of sequence markers.
As an example, the binary:
gdb/testsuite/outputs/gdb.dwarf2/dw2-ranges-func/dw2-ranges-func-lo-cold
Has this line table before the patch:
INDEX LINE ADDRESS
0 48 0x0000000000400487
1 END 0x000000000040048e
2 52 0x000000000040048e
3 54 0x0000000000400492
4 56 0x0000000000400497
5 END 0x000000000040049a
6 62 0x000000000040049a
7 END 0x00000000004004a1
8 66 0x00000000004004a1
9 68 0x00000000004004a5
10 70 0x00000000004004aa
11 72 0x00000000004004b9
12 END 0x00000000004004bc
13 76 0x00000000004004bc
14 78 0x00000000004004c0
15 80 0x00000000004004c5
16 END 0x00000000004004cc
And after this patch:
INDEX LINE ADDRESS
0 48 0x0000000000400487
1 52 0x000000000040048e
2 END 0x000000000040048e
3 54 0x0000000000400492
4 56 0x0000000000400497
5 END 0x000000000040049a
6 62 0x000000000040049a
7 66 0x00000000004004a1
8 END 0x00000000004004a1
9 68 0x00000000004004a5
10 70 0x00000000004004aa
11 72 0x00000000004004b9
12 END 0x00000000004004bc
13 76 0x00000000004004bc
14 78 0x00000000004004c0
15 80 0x00000000004004c5
16 END 0x00000000004004cc
When calling find_pc_sect_line with the address 0x000000000040048e, in
both cases we find entry #3, we then try to find the previous entry,
which originally found this entry '2 52 0x000000000040048e',
after the patch it finds '2 END 0x000000000040048e', which
cases the lookup to fail.
By skipping the END marker after this patch we get back to the correct
entry, which is now #1: '1 52 0x000000000040048e', and
everything works again.
gdb/ChangeLog:
* buildsym.c (lte_is_less_than): Delete.
(buildsym_compunit::end_symtab_with_blockvector): Create local
lambda function to sort line table entries, and use
std::stable_sort instead of std::sort.
* symtab.c (find_pc_sect_line): Skip backward over end of sequence
markers when looking for a previous line.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/dw2-inline-stepping.c: New file.
* gdb.dwarf2/dw2-inline-stepping.exp: New file.
Change-Id: Ia0309494be4cfd9dcc554f30209477f5f040b21b
In this commit:
commit d9b3de22f3
Date: Wed May 27 14:44:29 2015 -0700
Add struct to record dwarf line number state machine.
I believe an unintended change was made to how we store the DWARF line
table, the end of sequence markers between sequences of lines were
lost from the line table.
This commit fixes this small oversight and restores the end of
sequence markers.
Given that we've survived this long without noticing is clearly an
indication that this isn't that serious, however, a later patch that I
am developing would benefit from having the markers in place, so I'd
like to restore them.
Having the markers also means that the output of 'maintenance info
line-table' now more closely reflects the DWARF line table.
I've taken this opportunity to improve how 'maintenance info
line-table' displays the end of sequence markers - it now uses the END
keyword, rather than just printing an entry with line number 0. So we
see this:
INDEX LINE ADDRESS
0 12 0x00000000004003b0
1 17 0x00000000004003b0
2 18 0x00000000004003b0
3 END 0x00000000004003b7
4 5 0x00000000004004a0
5 6 0x00000000004004a0
6 END 0x00000000004004a7
Instead of what we would have seen, which was this:
INDEX LINE ADDRESS
0 12 0x00000000004003b0
1 17 0x00000000004003b0
2 18 0x00000000004003b0
3 0 0x00000000004003b7
4 5 0x00000000004004a0
5 6 0x00000000004004a0
6 0 0x00000000004004a7
I've added a small test that uses 'maintenance info line-table' to
ensure that we don't regress this again.
gdb/ChangeLog:
* dwarf2read.c (lnp_state_machine::record_line): Include
end_sequence parameter in debug print out. Record the line if we
are at an end_sequence marker even if it's not the start of a
statement.
* symmisc.c (maintenance_print_one_line_table): Print end of
sequence markers with 'END' not '0'.
gdb/testsuite/ChangeLog:
* gdb.base/maint.exp: Update line table parsing test.
* gdb.dwarf2/dw2-ranges-base.exp: Add new line table parsing test.
Change-Id: I002f872248db82a1d4fefdc6b51ff5dbf932d8a8
This fixes a latent bug exposed by the multi-target patch (5b6d1e4fa
"Multi-target support), and then fixes two other latent bugs exposed
by fixing that first latent bug.
The symptom described in the bug report is that starting a first
inferior, then trying to run a second (multi-threaded) inferior twice,
causes libthread_db to fail to load, along with other erratic
behavior:
(gdb) run
Starting program: /tmp/foo
warning: td_ta_new failed: generic error
Going a bit deeply, I found that if the two inferiors have different
symbols, we can see that just after inferior 2 exits, we are left with
inferior 2 selected, which is correct, but the symbols in scope belong
to inferior 1, which is obviously incorrect...
This problem is that there's a path in
scoped_restore_current_thread::restore() that switches to no thread
selected, and switches the current inferior, but leaves the current
program space as is, resulting in leaving the program space pointing
to the wrong program space (the one of the other inferior). This was
happening after handling TARGET_WAITKIND_NO_RESUMED, which is an event
that triggers after TARGET_WAITKIND_EXITED for the previous inferior
exit. Subsequent symbol lookups find the symbols of the wrong
inferior.
The fix is to use switch_to_inferior_no_thread in that problem spot.
This function was recently added along with the multi-target work
exactly for these situations.
As for testing, this patch adds a new testcase that tests symbol
printing just after inferior exit, which exercises the root cause of
the problem more directly. And then, to cover the use case described
in the bug too, it also exercises the lithread_db.so mis-loading, by
using TLS printing as a proxy for being sure that threaded debugging
was activated sucessfully. The testcase fails without the fix like
this, for the "print symbol just after exit" bits:
...
[Inferior 1 (process 8719) exited normally]
(gdb) PASS: gdb.multi/multi-re-run.exp: re_run_inf=1: iter=1: continue until exit
print re_run_var_1
No symbol "re_run_var_1" in current context.
(gdb) FAIL: gdb.multi/multi-re-run.exp: re_run_inf=1: iter=1: print re_run_var_1
...
And like this for the "libthread_db.so loading" bits:
(gdb) run
Starting program: /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.multi/multi-re-run/multi-re-run
warning: td_ta_new failed: generic error
[New LWP 27001]
Thread 1.1 "multi-re-run" hit Breakpoint 3, all_started () at /home/pedro/gdb/binutils-gdb/build/../src/gdb/testsuite/gdb.multi/multi-re-run.c:44
44 }
(gdb) PASS: gdb.multi/multi-re-run.exp: re_run_inf=1: iter=2: running to all_started in runto
print tls_var
Cannot find thread-local storage for LWP 27000, executable file /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.multi/multi-re-run/multi-re-run:
Cannot find thread-local variables on this target
(gdb) FAIL: gdb.multi/multi-re-run.exp: re_run_inf=1: iter=2: print tls_var
As mentioned, that fix above goes on to expose a couple other latent
bugs. This commit fixes those as well.
The first latent bug exposed is in
infrun.c:handle_vfork_child_exec_or_exit. The current code is leaving
inf->pspace == NULL while calling clone_program_space. The idea was
to make it so that the breakpoints module doesn't use this inferior's
pspace to set breakpoints. With that, any
scoped_restore_current_thread use from within clone_program_space
tries to restore a NULL program space, which hits an assertion:
Attaching after Thread 0x7ffff74b8700 (LWP 27276) vfork to child process 27277]
[New inferior 2 (process 27277)]
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib64/libthread_db.so.1".
/home/pedro/gdb/binutils-gdb/build/../src/gdb/progspace.c:243: internal-error: void set_current_program_space(program_space*): Assertion `pspace != NULL' faile
d.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) FAIL: gdb.threads/vfork-follow-child-exit.exp: detach-on-fork=off: continue (GDB internal error)
That NULL pspace idea was legitimate, but it's no longer necessary,
since commit b2e586e850 ("Defer breakpoint reset when cloning
progspace for fork child"). So the fix is to just set the inferior's
program space earlier.
The other latent bug exposed is in exec.c. When exec_close is called
from the program_space destructor, it is purposedly called with a
current program space that is not the current inferior's program
space. The problem is that the multi-target work added some code to
remove_target_sections that loops over all inferiors, and uses
scoped_restore_current_thread to save/restore the previous
thread/inferior/frame state. This makes it so that exec_close returns
with the current program space set to the current inferior's program
space, which is exactly what we did not want. Then the program_space
destructor continues into free_all_objfiles, but it is now running
that method on the wrong program space, resulting in:
Reading symbols from /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.threads/fork-plus-threads/fork-plus-threads...
Reading symbols from /usr/lib/debug/usr/lib64/libpthread-2.26.so.debug...
Reading symbols from /usr/lib/debug/usr/lib64/libm-2.26.so.debug...
Reading symbols from /usr/lib/debug/usr/lib64/libc-2.26.so.debug...
Reading symbols from /usr/lib/debug/usr/lib64/ld-2.26.so.debug...
[Inferior 3 (process 9583) exited normally]
/home/pedro/gdb/binutils-gdb/build/../src/gdb/progspace.c:170: internal-error: void program_space::free_all_objfiles(): Assertion `so->objfile == NULL' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: inferior 1 exited (GDB internal error)
The fix is to use scoped_restore_current_pspace_and_thread instead of
scoped_restore_current_thread.
gdb/ChangeLog:
2020-01-24 Pedro Alves <palves@redhat.com>
PR gdb/25410
* thread.c (scoped_restore_current_thread::restore): Use
switch_to_inferior_no_thread.
* exec.c: Include "progspace-and-thread.h".
(add_target_sections, remove_target_sections):
scoped_restore_current_pspace_and_thread instead of
scoped_restore_current_thread.
* infrun.c (handle_vfork_child_exec_or_exit): Assign the pspace
and aspace to the inferior before calling clone_program_space.
Remove stale comment.
gdb/testsuite/ChangeLog:
2020-01-24 Pedro Alves <palves@redhat.com>
PR gdb/25410
* gdb.multi/multi-re-run-1.c: New.
* gdb.multi/multi-re-run-2.c: New.
* gdb.multi/multi-re-run.exp: New.
Fixes a compile error because the class is actually called
arm_netbsd_nat_target.
gdb/ChangeLog:
2020-01-24 Christian Biesinger <cbiesinger@google.com>
* arm-nbsd-nat.c (arm_nbsd_nat_target::fetch_registers): Rename to...
(arm_netbsd_nat_target::fetch_registers): ...this.
(arm_nbsd_nat_target::store_registers): Rename to...
(arm_netbsd_nat_target::store_registers): ...this.
Change-Id: Ibebfab9edeff48f54c32d0745afda1d74d31de92
Fixes the below compile error on ARM NetBSD 9.0_RC1 (the only version I
tested). types.h does not define register_t by default.
We already use this define elsewhere, notably in bsd-kvm.c.
In file included from ../../gdb/arm-nbsd-nat.c:28:
/usr/include/machine/frame.h:54:2: error: unknown type name 'register_t'; did you mean '__register_t'?
register_t tf_spsr;
^
/usr/include/machine/types.h:77:14: note: '__register_t' declared here
typedef int __register_t;
^
There are other compile errors that this does not fix.
gdb/ChangeLog:
2020-01-24 Christian Biesinger <cbiesinger@google.com>
* arm-nbsd-nat.c: Define _KERNTYPES to get the declaration of
register_t.
Change-Id: I82c21d38189ee59ea0af2538ba84b771d268722e
regset_from_core_section doesn't exist anymore; it has been replaced
by the iterate_over_regset_sections gdbarch method. Update comments
accordingly to not confuse readers.
gdb/ChangeLog:
2020-01-24 Christian Biesinger <cbiesinger@google.com>
* aarch64-fbsd-tdep.c (aarch64_fbsd_iterate_over_regset_sections):
Update comment.
* aarch64-linux-tdep.c (aarch64_linux_iterate_over_regset_sections):
Likewise.
* arm-fbsd-tdep.c (arm_fbsd_iterate_over_regset_sections): Likewise.
* gdbcore.h (deprecated_add_core_fns): Update comment to point to
the correct replacement (iterate_over_regset_sections).
* riscv-fbsd-tdep.c (riscv_fbsd_iterate_over_regset_sections):
Update comment.
Change-Id: I5eea4d18e15edae5d6dfd5d0d6241e5b2ae40daa
This is an update of this patch:
https://sourceware.org/ml/gdb-patches/2018-09/msg00884.html
This patch attempts to address PR gdb/23718 by re-enabling stdin
whenever an exception is caught during gdb.execute().
When Python gdb.execute() is called, an exception could occur (e.g. the
target disappearing), which is then converted into a Python exception. If
stdin was disabled before the exception is caught, it is not re-enabled,
because the exception doesn't propagate to the top level of the event loop,
whose catch block would otherwise enable it.
The result is that when execution of a Python script completes, GDB does
not prompt or accept input, and is effectively hung.
This change rectifies the issue by re-enabling stdin in the catch block of
execute_gdb_command, prior to converting the exception to a Python
exception.
Since this patch was originally posted I've added a test, and also I
converted the code to re-enable stdin from this:
SWITCH_THRU_ALL_UIS ()
{
async_enable_stdin ();
}
to simply this:
async_enable_stdin ();
My reasoning is that we only need the SWITCH_THRU_ALL_UIS if, at the time
the exception is caught, the current_ui might be different than at the time
we called async_disable_stdin. Within python's execute_gdb_command I think
it should be impossible to switch current_ui, so the SWITCH_THRU_ALL_UIS
isn't needed.
gdb/ChangeLog:
PR gdb/23718
* gdb/python/python.c (execute_gdb_command): Call
async_enable_stdin in catch block.
gdb/testsuite/ChangeLog:
PR gdb/23718
* gdb.server/server-kill-python.exp: New file.
Change-Id: I1cfc36ee9f8484cc1ed82be9be338353db6bc080
If we catch an exception in start_event_loop's call to
gdb_do_one_event, then it is possible that the current_ui has changed
since we called async_disable_stdin. If that's the case then calling
async_enable_stdin will be called on the wrong UI.
To solve this problem we wrap the call to async_enable_stdin with
SWITCH_THRU_ALL_UIS, this causes us to try and re-enable stdin for all
UIs, which will catch any for which we called async_disable_stdin.
gdb/ChangeLog:
* event-loop.c (start_event_loop): Wrap async_enable_stdin with
SWITCH_THRU_ALL_UIS.
gdb/testsuite/ChangeLog:
* gdb.server/multi-ui-errors.c: New file.
* gdb.server/multi-ui-errors.exp: New file.
Change-Id: I1e18deff2e6f4e17f7a13adce3553eb001cad93b
This started as a patch to enable the asm window to handle attempts to
disassemble invalid memory, but it ended up expanding into a
significant rewrite of how the asm window handles scrolling. These
two things ended up being tied together as it was impossible to
correctly test scrolling into invalid memory when the asm window would
randomly behave weirdly while scrolling.
Things that should work nicely now; scrolling to the bottom or top of
the listing with PageUp, PageDown, Up Arrow, Down Arrow and we should
be able to scroll past small areas of memory that don't have symbols
associated with them. It should also be possible to scroll to the
start of a section even if there's no symbol at the start of the
section.
Adding tests for this scrolling was a little bit of a problem. First
I would have liked to add tests for PageUp / PageDown, but the tuiterm
library we use doesn't support these commands right now due to only
emulating a basic ascii terminal. Changing this to emulate a more
complex terminal would require adding support for more escape sequence
control codes, so I've not tried to tackle that in this patch.
Next, I would have liked to test scrolling to the start or end of the
assembler listing and then trying to scroll even more, however, this
is a problem because in a well behaving GDB a scroll at the start/end
has no effect. What we need to do is:
- Move to start of assembler listing,
- Send scroll up command,
- Wait for all curses output,
- Ensure the assembler listing is unchanged, we're still at the
start of the listing.
The problem is that there is no curses output, so how long do we wait
at step 3? The same problem exists for scrolling to the bottom of the
assembler listing. However, when scrolling down you can at least see
the end coming, so I added a test for this case, however, this feels
like an area of code that is massively under tested.
gdb/ChangeLog:
PR tui/9765
* minsyms.c (lookup_minimal_symbol_by_pc_section): Update header
comment, add extra parameter, and update to store previous symbol
when appropriate.
* minsyms.h (lookup_minimal_symbol_by_pc_section): Update comment,
add extra parameter.
* tui/tui-disasm.c (tui_disassemble): Update header comment,
remove unneeded parameter, add try/catch around gdb_print_insn,
rewrite to add items to asm_lines vector.
(tui_find_backward_disassembly_start_address): New function.
(tui_find_disassembly_address): Updated throughout.
(tui_disasm_window::set_contents): Update for changes to
tui_disassemble.
(tui_disasm_window::do_scroll_vertical): No need to adjust the
number of lines to scroll.
gdb/testsuite/ChangeLog:
PR tui/9765
* gdb.tui/tui-layout-asm.exp: Add scrolling test for asm window.
Change-Id: I323987c8fd316962c937e73c17d952ccd3cfa66c
The pattern
objfile->section_offsets[SECT_OFF_TEXT (objfile)]
... appears very often, to get the offset of the text section of an
objfile. I thought it would be more readable to write it as:
objfile->text_section_offset ()
... so I added this method and used it where possible. I also added
data_section_offset, although it is not used as much.
gdb/ChangeLog:
* objfiles.h (ALL_OBJFILE_OSECTIONS): Move up.
(SECT_OFF_DATA): Likewise.
(SECT_OFF_RODATA): Likewise.
(SECT_OFF_TEXT): Likewise.
(SECT_OFF_BSS): Likewise.
(struct objfile) <text_section_offset, data_section_offset>: New
methods.
* amd64-windows-tdep.c (amd64_windows_find_unwind_info): Use
objfile::text_section_offset.
* coff-pe-read.c (add_pe_forwarded_sym): Likewise.
* coffread.c (coff_symtab_read): Likewise.
(enter_linenos): Likewise.
(process_coff_symbol): Likewise.
* ctfread.c (get_objfile_text_range): Likewise.
* dtrace-probe.c (dtrace_probe::get_relocated_address):
Use objfile::data_section_offset.
* dwarf2-frame.c (execute_cfa_program): Use
objfile::text_section_offset.
(dwarf2_frame_find_fde): Likewise.
* dwarf2read.c (create_addrmap_from_index): Likewise.
(create_addrmap_from_aranges): Likewise.
(dw2_find_pc_sect_compunit_symtab): Likewise.
(process_psymtab_comp_unit_reader): Likewise.
(add_partial_symbol): Likewise.
(add_partial_subprogram): Likewise.
(process_full_comp_unit): Likewise.
(read_file_scope): Likewise.
(read_func_scope): Likewise.
(read_lexical_block_scope): Likewise.
(read_call_site_scope): Likewise.
(dwarf2_rnglists_process): Likewise.
(dwarf2_ranges_process): Likewise.
(dwarf2_ranges_read): Likewise.
(dwarf_decode_lines_1): Likewise.
(new_symbol): Likewise.
(dwarf2_fetch_die_loc_sect_off): Likewise.
(dwarf2_per_cu_text_offset): Likewise.
* hppa-bsd-tdep.c (hppabsd_find_global_pointer): Likewise.
* hppa-tdep.c (read_unwind_info): Likewise.
* ia64-tdep.c (ia64_find_unwind_table): Likewise.
* psympriv.h (struct partial_symtab): Likewise.
* psymtab.c (find_pc_sect_psymtab): Likewise.
* solib-svr4.c (enable_break): Likewise.
* stap-probe.c (relocate_address): Use
objfile::data_section_offset.
* xcoffread.c (enter_line_range): Use
objfile::text_section_offset.
(read_xcoff_symtab): Likewise.
We encounter this error when building on macOS with GCC.
CXX darwin-nat.o
/src-local/binutils-gdb/gdb/darwin-nat.c: In member function 'ptid_t darwin_nat_target::wait_1(ptid_t, target_waitstatus*)':
/src-local/binutils-gdb/gdb/darwin-nat.c:1264:18: error: declaration of 'inf' shadows a previous local [-Werror=shadow=compatible-local]
for (inferior *inf : all_inferiors (this))
^~~
/src-local/binutils-gdb/gdb/darwin-nat.c:1205:20: note: shadowed declaration is here
struct inferior *inf;
^~~
Fix it by moving the declaration of `inf` in the specific scopes that
need it. I think it's clearer this way anyway, as it shows that it's
not the same `inf` that is used in these different scopes.
Thanks to Iain Sandoe for reporting this. I did not see this error at
first, because I compile with the default system compiler on macOS,
which is clang. The compiler flag we try to enable for this is
`-Wshadow=local`, which is not one recognized by clang. I checked to
see if there would a version of the -Wshadow* warnings [1] we could
enable for clang, that would catch this, but the only one that would is
`-Wshadow` itself, and this is too invasive for us (which is why we
enabled just -Wshadow=local in the first place).
[1] https://clang.llvm.org/docs/DiagnosticsReference.html#wshadow
gdb/ChangeLog:
* darwin-nat.c (darwin_nat_target::wait_1): Move `inf`
declaration to narrower scopes.
The darwin-nat.c file doesn't build since the multi-target changes
(5b6d1e4f, "Multi-target support"). This patch makes it build. I have
access to a macOS vm, so I am able to build it, but I wasn't able to
successfully codesign it and try to actually debug something, so I don't
know if it works. I don't have much more time to put on this to figure
it out, so I thought I'd sent the patch anyway, as it's at least a step
in the right direction.
The bulk of the patch is to change a bunch of functions to be methods of
the darwin_nat_target object, so that this can pass `this` to
find_inferior_ptid and other functions that now require a
process_stratum_target pointer.
The darwin_ptrace_him function (renamed to darwin_nat_target::ptrace_him
in this patch) is passed to fork_inferior as the `init_trace_fun`
parameter. Since the method can't be passed as a plain function pointer
(we need the `this` pointer), I changed the `init_trace_fun` parameter
of fork_inferior to be a gdb::function_view, so we can pass a lambda and
capture `this`.
The changes in darwin-nat.h are only to move definition higher in the
file, so that forward declarations are not needed.
gdb/ChangeLog:
* darwin-nat.h (struct darwin_exception_msg, enum
darwin_msg_state, struct darwin_thread_info, darwin_thread_t):
Move up.
(class darwin_nat_target) <wait_1, check_new_threads,
decode_exception_message, decode_message, stop_inferior,
init_thread_list, ptrace_him, cancel_breakpoint>: Declare.
* darwin-nat.c (darwin_check_new_threads): Rename to...
(darwin_nat_target::check_new_threads): ... this.
(darwin_suspend_inferior_it): Remove.
(darwin_decode_exception_message): Rename to...
(darwin_nat_target::decode_exception_message): ... this.
(darwin_nat_target::resume): Pass target to find_inferior_ptid.
(darwin_decode_message): Rename to...
(darwin_nat_target::decode_message): ... this.
(cancel_breakpoint): Rename to...
(darwin_nat_target::cancel_breakpoint): ... this.
(darwin_wait): Rename to...
(darwin_nat_target::wait_1): ... this. Use range-based for loop
instead of iterate_over_inferiors.
(darwin_nat_target::wait): Call wait_1 instead of darwin_wait.
(darwin_stop_inferior): Rename to...
(darwin_nat_target::stop_inferior): ... this.
(darwin_nat_target::kill): Call wait_1 instead of darwin_wait.
(darwin_init_thread_list): Rename to...
(darwin_nat_target::init_thread_list): ... this.
(darwin_ptrace_him): Rename to...
(darwin_nat_target::ptrace_him): ... this.
(darwin_nat_target::create_inferior): Pass lambda function to
fork_inferior.
(darwin_nat_target::detach): Call stop_inferior instead of
darwin_stop_inferior.
* fork-inferior.h (fork_inferior): Change init_trace_fun
parameter to gdb::function_view.
* fork-inferior.c (fork_inferior): Likewise.
Each time a dll is loaded, update_solib_list is called.
This in turn calls deep down xfer_partial -> windows_xfer_shared_libraries,
which calls windows_xfer_shared_library for each loaded dll,
and pe_text_section_offset reads the dll for the text section offset.
Also if the data provided by xfer_partial is bigger than 4K,
then all of this is done for each 4K chunk (see target_read_alloc_1).
Caching of the text section offset improves the startup time of
an application with >300 dynamically loaded plugins from 2m10s to 10s.
And the shutdown time improves from 2m to 2s.
gdb/ChangeLog:
2020-01-23 Hannes Domani <ssbssa@yahoo.de>
* i386-cygwin-tdep.c (core_process_module_section): Update.
* windows-nat.c (struct lm_info_windows): Add text_offset.
(windows_xfer_shared_libraries): Update.
* windows-tdep.c (windows_xfer_shared_library):
Add text_offset_cached argument.
* windows-tdep.h (windows_xfer_shared_library): Update.
In commit
gdb: add back declarations for _initialize functions
6c2659886f
I wrongfully edited gdbarch.c, instead of editing gdbarch.sh and
re-generating gdbarch.c. This patch fixes gdbarch.sh to add a
declaration for _initialize_gdbarch. gdbarch.c is not changed, as the
output of gdbarch.sh now matches the current state of gdbarch.c.
gdb/ChangeLog:
* gdbarch.sh: Add declaration for _initialize_gdbarch.
This removes the two uses of iterate_over_inferiors, in favor of
range-based loops.
gdb/ChangeLog:
* remote-sim.c (check_for_duplicate_sim_descriptor): Remove.
(get_sim_inferior_data): Remove use of iterate_over_inferiors,
replace with range-based for.
(gdbsim_interrupt_inferior): Remove.
(gdbsim_target::interrupt): Replace iterate_over_inferiors use
with a range-based for. Inline code from
gdbsim_interrupt_inferior.
While GNU Source Highlight is good, it's also difficult to build and
distribute. For one thing, it needs Boost. For another, it has an
unusual configuration and installation setup.
Pygments, a Python library, doesn't suffer from these issues, and so I
thought it would be a reasonable fallback.
This patch implements this idea. GNU Source Highlight is preferred,
but if it is unavailable (or fails), the extension languages are
tried. This patch also implements support for Pygments.
Something similar could be done for Guile, using:
https://dthompson.us/projects/guile-syntax-highlight.html
However, I don't know enough about Guile internals to make this
happen, so I have not done it here.
gdb/ChangeLog
2020-01-21 Tom Tromey <tromey@adacore.com>
* source-cache.c (source_cache::ensure): Call ext_lang_colorize.
* python/python.c (python_extension_ops): Update.
(gdbpy_colorize): New function.
* python/lib/gdb/__init__.py (colorize): New function.
* extension.h (ext_lang_colorize): Declare.
* extension.c (ext_lang_colorize): New function.
* extension-priv.h (struct extension_language_ops) <colorize>: New
member.
* cli/cli-style.c (_initialize_cli_style): Update help text.
Change-Id: I5e21623ee05f1f66baaa6deaeca78b578c031bf4
As suggested, the cond variable is really supposed to be a bool. So,
make it so.
gdb/ChangeLog:
2020-01-21 Luis Machado <luis.machado@linaro.org>
* aarch64-tdep.c (struct aarch64_displaced_step_closure)
<cond>: Change type to bool.
(aarch64_displaced_step_b_cond): Update cond to use bool type.
(aarch64_displaced_step_cb): Likewise.
(aarch64_displaced_step_tb): Likewise.
While debugging the step-over-syscall problem, i wanted to see a bit more
debugging output to try to determine the root cause.
This patch does this.
gdb/ChangeLog:
2020-01-21 Luis Machado <luis.machado@linaro.org>
* aarch64-tdep.c (aarch64_displaced_step_fixup): Add more debugging
output.
In particular, this one:
FAIL: gdb.base/step-over-syscall.exp: fork: displaced=on: check_pc_after_cross_syscall: single step over fork final pc
When ptrace fork event reporting is enabled, GDB gets a PTRACE_EVENT_FORK
event whenever the inferior executes the fork syscall.
Then the logic is that GDB needs to step the inferior yet again in order to
receive a predetermined SIGTRAP, but no execution takes place because the
signal was already queued for delivery. That means the PC should stay the same.
I noticed the aarch64 code is currently adjusting the PC in this situation,
making the inferior skip an instruction without executing it.
The following change checks if we did not execute the instruction
(pc - to == 0), making proper adjustments for such case.
Regression tested on aarch64-linux-gnu on the tryserver.
gdb/ChangeLog:
2020-01-21 Luis Machado <luis.machado@linaro.org>
* aarch64-tdep.c (struct aarch64_displaced_step_closure )
<pc_adjust>: Adjust the documentation.
(aarch64_displaced_step_fixup): Check if PC really moved before
adjusting it.
Commit 20135676fc ("PR24960, Memory leak
from disassembler") added "disassemble_free_target" to opcodes. This
is used to free target-specific data when finished with a
disassembler.
This patch changes gdb to call this function where needed.
gdb/ChangeLog
2020-01-19 Tom Tromey <tom@tromey.com>
* disasm.c (~gdb_disassembler): New destructor.
(gdb_buffered_insn_length): Call disassemble_free_target.
* disasm.h (class gdb_disassembler): Declare destructor. Use
DISABLE_COPY_AND_ASSIGN.
Change-Id: I245ba5b7dec5e5d9f29cd21832c6e2b4fecef047
init_cutu_and_read_dies takes a callback function, which I've always
found somewhat difficult to follow. This patch replaces this function
with a class, and changes the callers to use it. In some cases this
allows for the removal of a helper struct and helper function as well.
gdb/ChangeLog
2020-01-19 Tom Tromey <tom@tromey.com>
* dwarf2read.c (abbrev_table_up): Move typedef earlier.
(die_reader_func_ftype): Remove.
(cutu_reader): New class.
(dw2_get_file_names_reader): Remove "data" parameter.
(dw2_get_file_names): Use cutu_reader.
(create_debug_type_hash_table): Update.
(read_cutu_die_from_dwo): Update comment.
(lookup_dwo_unit): Add dwo_name parameter.
(cutu_reader::init_tu_and_read_dwo_dies): Now a method. Remove
die_reader_func_ftype and data parameters.
(cutu_reader::cutu_reader): Rename from init_cutu_and_read_dies.
Remove die_reader_func_ftype and data parameters.
(~cutu_reader): New; from init_cutu_and_read_dies.
(cutu_reader::cutu_reader): Rename from
init_cutu_and_read_dies_no_follow. Remove die_reader_func_ftype
and data parameters.
(init_cutu_and_read_dies_simple): Remove.
(struct process_psymtab_comp_unit_data): Remove.
(process_psymtab_comp_unit_reader): Remove data parameter; add
want_partial_unit and pretend_language parameters.
(process_psymtab_comp_unit): Use cutu_reader.
(build_type_psymtabs_reader): Remove data parameter.
(build_type_psymtabs_1): Use cutu_reader.
(process_skeletonless_type_unit): Likewise.
(load_partial_comp_unit_reader): Remove.
(load_partial_comp_unit): Use cutu_reader.
(load_full_comp_unit_reader): Remove.
(load_full_comp_unit): Use cutu_reader.
(struct create_dwo_cu_data): Remove.
(create_dwo_cu_reader): Remove datap parameter; add dwo_file and
dwo_unit parameters.
(create_cus_hash_table): Use cutu_reader.
(struct dwarf2_read_addr_index_data): Remove.
(dwarf2_read_addr_index_reader): Remove.
(dwarf2_read_addr_index): Use cutu_reader.
(read_signatured_type_reader): Remove.
(read_signatured_type): Use cutu_reader.
Change-Id: I4ef2f29e73108ce94bfe97799f8f638ed272212d
In some cases, the TUI flickers when redrawing. This can be seen
mostly easily when switching layouts.
This patch fixes the problem by exploiting the double buffering that
curses already does. In some spots, the TUI will now disable flushing
the curses buffers to the screen; and then flush them all at once when
the rendering is complete.
gdb/ChangeLog
2020-01-19 Tom Tromey <tom@tromey.com>
* tui/tui.c (tui_show_assembly): Use tui_suppress_output.
* tui/tui-wingeneral.h (class tui_suppress_output): New.
(tui_wrefresh): Declare.
* tui/tui-wingeneral.c (suppress_output): New global.
(tui_suppress_output, ~tui_suppress_output): New constructor and
destructor.
(tui_wrefresh): New function.
(tui_gen_win_info::refresh_window): Use tui_wrefresh.
(tui_gen_win_info::make_window): Call wnoutrefresh when needed.
* tui/tui-regs.h (struct tui_data_window) <no_refresh>: Declare
method.
* tui/tui-regs.c (tui_data_window::erase_data_content): Call
tui_wrefresh.
(tui_data_window::no_refresh): New method.
(tui_data_item_window::refresh_window): Call tui_wrefresh.
(tui_reg_command): Use tui_suppress_output
* tui/tui-layout.c (tui_set_layout): Use tui_suppress_output.
* tui/tui-data.h (struct tui_gen_win_info) <no_refresh>: New
method.
* tui/tui-command.c (tui_refresh_cmd_win): Call tui_wrefresh.
Change-Id: Icb832ae100b861de3af3307488e636fa928d5c9f
I noticed that a plain "file" will leave the current source file in
the TUI source window. Instead, I think, it should clear the source
window. This patch implements this.
gdb/ChangeLog
2020-01-19 Tom Tromey <tom@tromey.com>
* tui/tui-winsource.c (tui_update_source_windows_with_line):
Handle case where symtab is null.
gdb/testsuite/ChangeLog
2020-01-19 Tom Tromey <tom@tromey.com>
* gdb.tui/main.exp: Add check for plain "file".
Change-Id: I8424acf837f1a47f75bc6a833d1e917d4c10b51e
Unless I'm missing something, this function is a complicated way of
saying "fork_list.size () == 1".
gdb/ChangeLog:
* linux-fork.c (one_fork_p): Simplify.
Replace with range-based for loops.
gdb/ChangeLog:
* top.c (struct qt_args): Remove.
(kill_or_detach): Change return type to void, replace `void *`
parameter with a proper one.
(print_inferior_quit_action): Likewise.
(quit_confirm): Use range-based for loop to iterate over inferiors.
(quit_force): Likewise.
Replace with range-based loops.
gdb/ChangeLog:
* mi/mi-main.c (run_one_inferior): Change return type to void, replace
`void *` parameter with proper parameters.
(mi_cmd_exec_run): Use range-based loop to iterate over inferiors.
(print_one_inferior): Change return type to void, replace `void *`
parameter with proper parameters.
(mi_cmd_list_thread_groups): Use range-based loop to iterate over
inferiors.
(get_other_inferior): Remove.
(mi_cmd_remove_inferior): Use range-based loop to iterate over
inferiors.
Replace it with a range-based for. I've updated the comment in
mi_interp::init, which was a bit stale.
gdb/ChangeLog:
* mi/mi-interp.c (report_initial_inferior): Remove.
(mi_interp::init): Use range-based for to iterate over inferiors.
Use range-based for instead of iterate_over_inferiors in one spot in the Python
code.
gdb/ChangeLog:
* python/py-inferior.c (build_inferior_list): Remove.
(gdbpy_ref): Use range-based for loop to iterate over inferiors.
The type then looks like this:
(gdb) pt $_tlb->process_environment_block->process_parameters
type = struct rtl_user_process_parameters {
DWORD32 maximum_length;
DWORD32 length;
DWORD32 flags;
DWORD32 debug_flags;
void *console_handle;
DWORD32 console_flags;
void *standard_input;
void *standard_output;
void *standard_error;
unicode_string current_directory;
void *current_directory_handle;
unicode_string dll_path;
unicode_string image_path_name;
unicode_string command_line;
void *environment;
DWORD32 starting_x;
DWORD32 starting_y;
DWORD32 count_x;
DWORD32 count_y;
DWORD32 count_chars_x;
DWORD32 count_chars_y;
DWORD32 fill_attribute;
DWORD32 window_flags;
DWORD32 show_window_flags;
unicode_string window_title;
unicode_string desktop_info;
unicode_string shell_info;
unicode_string runtime_data;
} *
It's mainly useful to get the current directory, or the full command line:
(gdb) p $_tlb->process_environment_block->process_parameters->current_directory
$1 = {
length = 26,
maximum_length = 520,
buffer = 0xe36c8 L"C:\\src\\tests\\"
}
(gdb) p $_tlb->process_environment_block->process_parameters->command_line
$2 = {
length = 94,
maximum_length = 96,
buffer = 0xe32aa L"\"C:\\gdb\\build64\\gdb-git\\gdb\\gdb.exe\" access.exe"
}
The type names are all lowercase because the existing types created
by windows_get_tlb_type are also lowercase.
Type unicode_string is documented at [1].
The official documentation [2] for rtl_user_process_parameters is limited,
so I've used this other page [3].
[1] https://docs.microsoft.com/en-us/windows/win32/api/ntdef/ns-ntdef-_unicode_string
[2] https://docs.microsoft.com/en-us/windows/win32/api/winternl/ns-winternl-rtl_user_process_parameters
[3] https://www.nirsoft.net/kernel_struct/vista/RTL_USER_PROCESS_PARAMETERS.html
gdb/ChangeLog:
2020-01-16 Hannes Domani <ssbssa@yahoo.de>
* windows-tdep.c (windows_get_tlb_type):
Add rtl_user_process_parameters type.
Compiling GDB with '-fvisibility=hidden' removes the symbols that
should be exported.
This patch explicitly marks them as visible.
gdb/ChangeLog:
2020-01-16 Pedro Alves <palves@redhat.com>
Norbert Lange <nolange79@gmail.com>
PR build/24805
* gdbsupport/gdb_proc_service.h (PS_EXPORT): New.
(ps_get_thread_area, ps_getpid, ps_lcontinue, ps_lgetfpregs)
(ps_lgetregs, ps_lsetfpregs, ps_lsetregs, ps_lstop, ps_pcontinue)
(ps_pdread, ps_pdwrite, ps_pglobal_lookup, ps_pstop, ps_ptread)
(ps_ptwrite, ps_lgetxregs, ps_lgetxregsize, ps_lsetxregs)
(ps_plog): Redeclare exported functions with default visibility.
This patch handles DW_LLE_base_addressx, DW_LLE_startx_length and
DW_LLE_start_length.
Tested by running the testsuite before and after the patch and there is
no increase in the number of test cases that fails. Tested with both
-gdwarf-4 and -gdwarf-5 flags. Also tested -gslit-dwarf along with
-gdwarf-4 as well as -gdwarf5 flags.
This is an effort to support DWARF5 in gdb.
gdb/ChangeLog:
* dwarf2loc.c (decode_debug_loclists_addresses): Handle
DW_LLE_base_addressx, DW_LLE_startx_length, DW_LLE_start_length.
In post_create_inferior, we get the current thread using the
inferior_thread function and store it in `thr`. We then call
get_current_regcache immediately after, which does:
return get_thread_regcache (inferior_thread ());
This patch makes post_create_inferior use get_thread_regcache, passing
`thr`, saving an unnecessary inferior_thread call.
gdb/ChangeLog:
* infcmd.c (post_create_inferior): Use get_thread_regcache
instead of get_current_regcache.
PR symtab/12535 points out that gdb.decode_line("") will cause a
valgrind report.
I think the empty linespec does not really make sense. So, this patch
changes gdb.decode_line to treat a whitespace-only linespec the same
as a non-existing argument.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
PR symtab/12535:
* python/python.c (gdbpy_decode_line): Treat empty string the same
as no argument.
gdb/testsuite/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
PR symtab/12535:
* gdb.python/python.exp: Test decode_line with empty string
argument.
Change-Id: I1d95812b4b7a21d69a3e9afd05b9e3141a931897
I noticed that gdb includes libiberty twice in its link line. I don't
think there's a need for this, so this patch removes one of the
references.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* Makefile.in (CLIBS): Remove second use of $(LIBIBERTY).
Change-Id: I43bb7100660867081f937c67ea70ff751c62bbfb
This removes the use of <config.h> from the files in gdb/nat/.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* nat/linux-btrace.c: Don't include <config.h>.
* nat/linux-ptrace.c: Don't include <config.h>.
* nat/x86-linux-dregs.c: Don't include <config.h>.
Change-Id: Ie8c734c54ada848aa020c77ec727704d367eff81
This moves many needed configure checks from gdb and gdbserver into
common.m4. This helps gdbsupport, nat, and target be self-contained.
The result is a bit spaghetti-ish, because gdbsupport uses another m4
file from gdb/. The resulting code is somewhat non-obvious. However,
these problems already exist, so it's not really that much worse than
what is already done.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac: Move many checks to ../gdbsupport/common.m4.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac: Remove any checks that were added to common.m4.
* acinclude.m4: Include lib-ld.m4, lib-prefix.m4, and
lib-link.m4.
gdbsupport/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* configure, Makefile.in, aclocal.m4, common.m4, config.in:
Rebuild.
* common.m4 (GDB_AC_COMMON): Move many checks from
gdb/configure.ac.
* acinclude.m4: Include bfd.m4, ptrace.m4.
Change-Id: I931eaa94065df268b30a2f1354390710df89c7f8
This patch moves the gdbsupport directory to the top level. This is
the next step in the ongoing project to move gdbserver to the top
level.
The bulk of this patch was created by "git mv gdb/gdbsupport gdbsupport".
This patch then adds a build system to gdbsupport and wires it into
the top level. Then it changes gdb to use the top-level build.
gdbserver, on the other hand, is not yet changed. It still does its
own build of gdbsupport.
ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* src-release.sh (GDB_SUPPORT_DIRS): Add gdbsupport.
* MAINTAINERS: Add gdbsupport.
* configure: Rebuild.
* configure.ac (configdirs): Add gdbsupport.
* gdbsupport: New directory, move from gdb/gdbsupport.
* Makefile.def (host_modules, dependencies): Add gnulib.
* Makefile.in: Rebuild.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* nat/x86-linux-dregs.c: Include configh.h.
* nat/linux-ptrace.c: Include configh.h.
* nat/linux-btrace.c: Include configh.h.
* defs.h: Include config.h, bfd.h.
* configure.ac: Don't source common.host.
(CONFIG_OBS, CONFIG_SRCS): Remove gdbsupport files.
* configure: Rebuild.
* acinclude.m4: Update path.
* Makefile.in (SUPPORT, LIBSUPPORT, INCSUPPORT): New variables.
(CONFIG_SRC_SUBDIR): Remove gdbsupport.
(INTERNAL_CFLAGS_BASE): Add INCSUPPORT.
(CLIBS): Add LIBSUPPORT.
(CDEPS): Likewise.
(COMMON_SFILES): Remove gdbsupport files.
(HFILES_NO_SRCDIR): Likewise.
(stamp-version): Update path to create-version.sh.
(ALLDEPFILES): Remove gdbsupport files.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* server.h: Include config.h.
* gdbreplay.c: Include config.h.
* configure: Rebuild.
* configure.ac: Don't source common.host.
* acinclude.m4: Update path.
* Makefile.in (INCSUPPORT): New variable.
(INCLUDE_CFLAGS): Add INCSUPPORT.
(SFILES): Update paths.
(version-generated.c): Update path to create-version.sh.
(gdbsupport/%-ipa.o, gdbsupport/%.o): Update paths.
gdbsupport/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* common-defs.h: Add GDBSERVER case. Update includes.
* acinclude.m4, aclocal.m4, config.in, configure, configure.ac,
Makefile.am, Makefile.in, README: New files.
* Moved from ../gdb/gdbsupport/
Change-Id: I07632e7798635c1bab389bf885971e584fb4bb78
I noticed that USE_WIN32API is defined separately by gdbserver and
gdb. However, because it is used by code in gdbsupport, it should be
defined by common.m4. This approach ensures that the code will
continue to work when it is moved to the top level.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* gdbsupport/common.m4 (GDB_AC_COMMON): Define WIN32APILIBS and
USE_WIN32API when needed.
* configure.ac (USE_WIN32API): Don't define.
(WIN32LIBS): Use WIN32APILIBS.
* configure: Rebuild.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* configure.ac (LIBS): Use WIN32APILIBS.
(USE_WIN32API): Don't define.
* configure: Rebuild.
Change-Id: I40d524d5445ebfb452b36f4d0e102f0b1e1089df
Simon pointed out that the indentation in common.m4 is off. This
patch fixes the problem.
gdb/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* gdbsupport/common.m4 (GDB_AC_COMMON): Fix indentation.
gdb/gdbserver/ChangeLog
2020-01-14 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
Change-Id: I6a629bd5873cca95ba3e17656f0d0ce583a08361
Previously always the outermost function block was used, but
since skip is now able to skip over inline functions it is more
natural to skip the inline function that the program is currently
executing.
gdb:
2020-01-14 Bernd Edlinger <bernd.edlinger@hotmail.de>
* skip.c (skip_function_command): Make skip w/o arguments use the
name of the inlined function if pc is inside any inlined function.
gdb/testsuite:
2020-01-14 Bernd Edlinger <bernd.edlinger@hotmail.de>
* gdb.base/skip-inline.exp: Extend test.
While doing some investigation of mine, i noticed a few typos,
inaccuracies and missing information.
I went ahead and updated/improved those.
gdb/ChangeLog:
2020-01-14 Luis Machado <luis.machado@linaro.org>
* inf-ptrace.c (inf_ptrace_target::resume): Update comments.
* infrun.c (resume_1): Likewise.
(handle_inferior_event): Remove stale comment.
* linux-nat.c (linux_nat_target::resume): Update comments.
(save_stop_reason): Likewise.
(linux_nat_filter_event): Likewise.
* linux-nat.h (struct lwp_info) <stop_pc>, <stop_reason>: Likewise.
I ended up debugging a malformed ELF where a section containing
executable code was not correctly marked as allocatable. Before
realising the ELF was corrupted I tried to place a breakpoint on a
symbol in the non-allocatable, executable section, and GDB crashed.
Though trying to debug such an ELF clearly isn't going to go well I
would prefer, as far as possible, that any input, no matter how
corrupted, not crash GDB.
The crash occurs when trying to set a breakpoint on the name of a
function from the corrupted section. GDB converts the symbol to a
symtab_and_line, and looks up a suitable section for this.
The problem is that the section is actually an obj_section, which is
stored in the table within the objfile, and we only initialise this
table for allocatable sections (see add_to_objfile_sections_full in
objfiles.c). So, if the symbol is in a non-allocatable section then
we end up referencing an uninitialised obj_section.
Later we call get_sal_arch on the symtab_and_line, which calls
get_objfile_arch, which uses the objfile from the uninitialised
obj_section, which will be nullptr, at which point GDB crashes.
The fix I propose here is that when we setup the section references on
msymbols, we should check if the bfd_section being referenced is
allocatable or not. If it is not then we should set the section
reference back to the default 0 section (see how MSYMBOL_OBJ_SECTION
and SYMBOL_OBJ_SECTION treat the 0 section index).
With this fix in place GDB no longer crashes. Instead GDB creates the
breakpoint at the non-allocated address, and then fails, with an
error, when it tries to insert the breakpoint.
gdb/ChangeLog:
* elfread.c (record_minimal_symbol): Set section index to 0 for
non-allocatable sections.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/dw2-bad-elf-other.S: New file.
* gdb.dwarf2/dw2-bad-elf.c: New file.
* gdb.dwarf2/dw2-bad-elf.exp: New file.
Change-Id: Ie05436ab4c6a71440304d20ee639dfb021223f8b
* Process debug_str_offsets section. Handle DW_AT_str_offsets_base attribute and
keep the value in dwarf2_cu.
* Make addr_base field in dwarf2_cu optional to disambiguate 0 value
(absent or present and 0).
* During parsing, there is no guarantee that DW_AT_str_offsets_base and
DW_AT_rnglists_base fields will be processed before the attributes that need
those values for correct computation. So make two passes, on the first one mark
the attributes that depend on *_base attributes and process only the others.
On the second pass, only process the attributes that are marked on the first
pass.
* For string attributes, differentiate between addresses that directly point to
a string and those that point to an offset in debug_str_offsets section.
* There are now two attributes, DW_AT_addr_base and DW_AT_GNU_addr_base to read
address offset base. Likewise, there are two attributes, DW_AT_rnglists_base
and DW_AT_GNU_ranges_base to read ranges base. Since there is no guarantee which
ones the compiler will generate, create helper functions to handle all cases.
Tested with CC=/usr/bin/gcc (version 8.3.0) against master branch (also with
-gsplit-dwarf and -gdwarf-4 flags) and there was no increase in the set of
tests that fails. (gdb still cannot debug a 'hello world' program with DWARF 5,
so for the time being, this is all we care about).
This is part of an effort to support DWARF-5 in gdb.
Since the data held by the `contents` variable is arbitrary binary data,
it should have gdb_byte elements, not char elements. Also, using
gdb::byte_vector is preferable, since it doesn't unnecessarily
zero-initialize the values.
Instead of adding a cast in the call to m_core_vec->core_read_registers,
I have changed core_read_registers' argument to be a gdb_byte* instead
of a char*.
gdb/ChangeLog:
* gdbcore.h (struct core_fns) <core_read_registers>: Change
core_reg_sect type to gdb_byte *.
* arm-nbsd-nat.c (fetch_elfcore_registers): Likewise.
* cris-tdep.c (fetch_core_registers): Likewise.
* corelow.c (core_target::get_core_register_section): Change
type of `contents` to gdb::byte_vector.
In tui-wingeneral.c:box_win () a comment suggest we should display
titles like this:
+-WINDOW TITLE GOES HERE-+
However, we actually display them like this:
+--WINDOW TITLE GOES HERE+
The former seems nicer to me, so that's what this commit does. Short
titles will appear as:
+-SHORT TITLE------------+
We previously didn't test the horizontal windows borders in the test
suite, however, I've updated things so that we do now check for the
'+-' and '-+' on the upper border, this will give us some protection.
gdb/ChangeLog:
* tui/tui-wingeneral.c (box_win): Position the title in the center
of the border.
gdb/testsuite/ChangeLog:
* lib/tuiterm.exp (Term::_check_box): Check some parts of the top
border.
Change-Id: Iead6910e3b4e68bdf6871f861f23d2efd699faf0
As I was trying to compile gdb for an m68k host, I got this error:
CXX corelow.o
In file included from /binutils-gdb/gdb/gdbsupport/common-defs.h:120,
from /binutils-gdb/gdb/defs.h:28,
from /binutils-gdb/gdb/corelow.c:20:
/binutils-gdb/gdb/corelow.c: In member function 'void core_target::get_core_register_section(regcache*, const regset*, const char*, int, int, const char*, bool)':
/binutils-gdb/gdb/../include/libiberty.h:727:36: error: 'alloca' bound is unknown [-Werror=alloca-larger-than=]
727 | # define alloca(x) __builtin_alloca(x)
| ~~~~~~~~~~~~~~~~^~~
/binutils-gdb/gdb/corelow.c:625:23: note: in expansion of macro 'alloca'
625 | contents = (char *) alloca (size);
| ^~~~~~
We are using alloca to hold the contents of a the core register
sections. These sections are typically fairly small, but there is no
realy guarantee, so I think it would be more reasonable to just use
dynamic allocation here.
gdb/ChangeLog:
* corelow.c (core_target::get_core_register_section): Use
std::vector instead of alloca.
Now that most warnings of this kind are fixed, we can enable
-Wmissing-declarations. I say "most", because it is likely that there
are some more in some configurations I am not able to build, but they
should be pretty easy to fix.
gdb/ChangeLog:
* warning.m4: Add -Wmissing-declarations to build_warnings.
* configure: Re-generate.
gdb/gdbserver/ChangeLog:
* configure: Re-generate.
Change-Id: Iae9b59f22eb5dd1965d09f34c5c9e212cddf67ba
When I try to enable -Wmissing-declarations, I get this error:
CXX python/python.o
/home/smarchi/src/binutils-gdb/gdb/python/python.c: In function ‘PyObject* init__gdb_module()’:
/home/smarchi/src/binutils-gdb/gdb/python/python.c:1582:1: error: no previous declaration for ‘PyObject* init__gdb_module()’ [-Werror=missing-declarations]
init__gdb_module (void)
^~~~~~~~~~~~~~~~
Prevent it by providing a declaration just before the definition.
gdb/ChangeLog:
* python/python.c (init__gdb_module): Add declaration.
Change-Id: I394bc691b7db624708cc4cb2cda28a56ab85a82b
When compiling gdbserver for an architecture that uses the regdat.sh
script (such as m68k) and the -Wmissing-declarations compiler flag, I
get:
REGDAT reg-m68k-generated.c
CXX reg-m68k.o
reg-m68k-generated.c:30:1: error: no previous declaration for 'void init_registers_m68k()' [-Werror=missing-declarations]
30 | init_registers_m68k (void)
| ^~~~~~~~~~~~~~~~~~~
The same happens with other architectures, such as s390, but I'll be
using 68k as an example.
The init_registers_m68k function is defined in reg-m68k-generated.c,
which is produced by the regformats/regdat.sh script. This script reads
the regformats/reg-m68k.dat file, containing a register description, and
produces C code that creates a corresponding target description at
runtime.
The init_registers_m68k function is invoked at initialization time in
linux-m68k-low.c. The function must therefore be non-static, but does
not have a declaration at the moment.
The real clean way of fixing this would be to make regdat.sh generate a
.h file (in addition to the .c file) with declarations for whatever is
in the .c file. The generated .c file would include the .h file, and
therefore the definition would have a corresponding declaration. The
linux-m68k-low.c file would also include this .h file, instead of having
its own declaration of init_registers_m68k, like it does now.
However, this would be a quite big change for not much gain. As far as
I understand, some common architectures (i386, x86-64, ARM, AArch64)
have been moved to dynamically building target descriptions based on
features (the linux-*-tdesc.c files in gdbserver) and don't use
regdat.sh anymore. Logically (and given infinite development
resources), the other architectures would be migrated to this system too
and the regdat.sh script would be dropped. A new architecture would
probably not use regdat.sh either. So I therefore propose this simpler
patch instead, which just adds a local declaration in the generated
file.
gdb/ChangeLog:
* regformats/regdat.sh: Generate declaration for init function.
The remote-sim.c file doesn't build since the main multi-target patch
(5b6d1e4f, "Multi-target support"), this patch is an attempt to fix it.
I have only build-tested it, so I'm not sure it runs fine, but it should
get us close at least.
I made these functions methods of the gdbsim_target, because they need
to pass the target down to some GDB core functions, like
find_inferior_ptid:
- get_sim_inferior_data_by_ptid (renamed to get_inferior_data_by_ptid)
- gdbsim_resume_inferior (renamed to resume_one_inferior)
- gdbsim_close_inferior (renamed to close_one_inferior)
In the last two, I changed iterate_over_inferiors to a range-based for,
since that gives simpler code (no need to pass data through the void
pointer).
The next_pid variable, INITIAL_PID macro and sim_inferior_data structure
are simply moved up in the file, above gdbsim_target.
gdb/ChangeLog:
* remote-sim.c (next_pid, INITIAL_PID, sim_inferior_data): Move
up.
(gdbsim_target) <get_inferior_data_by_ptid, resume_one_inferior,
close_one_inferior>: New methods.
(get_sim_inferior_data_by_ptid): Move to gdbsim_target,
pass down target to find_inferior_pid.
(gdbsim_target::fetch_registers, gdbsim_target::store_registers):
Pass down target to find_inferior_ptid.
(gdbsim_target::create_inferior): Pass down target to
add_thread_silent.
(gdbsim_close_inferior): Move to gdbsim_close_inferior, pass
target down to find_inferior_ptid and switch_to_thread.
(gdbsim_target::close): Update to call close_one_inferior.
(struct resume_data): Remove.
(gdbsim_resume_inferior): Move to gdbsim_target. Take arguments
directly, rather than through a void pointer.
(gdbsim_target::resume): Update to call resume_one_inferior.
When building for mingw with -Wmissing-declarations, I get:
CXX gdbsupport/gdb_wait.o
/binutils-gdb/gdb/gdbsupport/gdb_wait.c:52:1: error: no previous declaration for 'int windows_status_to_termsig(long unsigned int)' [-Wer
ror=missing-declarations]
52 | windows_status_to_termsig (unsigned long status)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
Make gdb_wait.c include gdb_wait.h to fix it.
gdb/ChangeLog:
* gdbsupport/gdb_wait.c: Include gdb_wait.h.
The multi-target patch should have removed all traces of
discard_all_inferiors, but somehow one use stayed behind along with
the definition of the function.
discard_all_inferiors is bad now because it blindly exits inferiors of
all target connections. It's best to remove it.
gdb/ChangeLog:
2020-01-12 Pedro Alves <palves@redhat.com>
* bsd-kvm.c (bsd_kvm_target::close): Call exit_inferior_silent
directly for the current inferior instead of
discard_all_inferiors.
(discard_all_inferiors): Delete.
When adding support for styling the TUI borders, I neglected to have
this code check cli_styling. As a result, "set style enabled off"
does not affect the borders.
This patch fixes this oversight. While doing this, I found that
running gdb without an executable, enabling the TUI, and then trying
"set style enabled off" would fail with the mysterious "No registers".
The fix for this is to use deprecated_safe_get_selected_frame in
tui_source_window_base::refill.
gdb/ChangeLog
2020-01-11 Tom Tromey <tom@tromey.com>
* tui/tui-wingeneral.c (box_win): Check cli_styling.
* tui/tui-winsource.c (tui_source_window_base::refill): Use
deprecated_safe_get_selected_frame.
Change-Id: I36acda25dd9014d994d366b4a0e8faee9d95d0f8
GDB uses the 'current_top_target' when displaying the description of
an inferior. This leads to same target being used for each inferior
and, in turn, yields incorrect output when the inferior has a target
that is supposed to give a specialized output. For instance, the
remote target outputs "Remote target" instead of "process XYZ" as the
description if the multi-process feature is not supported or turned
off.
E.g.: Suppose we have a native and a remote target, and the native is
the current inferior. The remote target does not support multi-process.
For "info inferiors", we would expect to see:
~~~
(gdb) i inferiors
Num Description Connection Executable
* 1 process 29060 1 (native) /a/path
2 Remote target 2 (remote ...)
~~~
but instead we get
~~~
(gdb) i inferiors
Num Description Connection Executable
* 1 process 29060 1 (native) /a/path
2 process 42000 2 (remote ...)
~~~
Similarly, if the current inferior is the remote one, we would expect
to see
~~~
(gdb) i inferiors
Num Description Connection Executable
1 process 29060 1 (native) /a/path
* 2 Remote target 2 (remote ...)
~~~
but we get
~~~
(gdb) i inferiors
Num Description Connection Executable
* 1 Remote target 1 (native) /a/path
2 Remote target 2 (remote ...)
~~~
With this patch, we switch to the inferior when outputting its
description, so that the current_top_target will be aligned to the
inferior we are displaying.
For testing, this patch expands the "info inferiors" test for the
multi-target feature. The test was checking for the output of the
info commands after setup, only when the current inferior is the last
added inferior.
This patch does the following to the testcase:
1. The "info inferiors" and "info connections" test is extracted out
from the "setup" procedure to a separate procedure.
2. The test is enriched to check the output after switching to each
inferior, not just the last one.
3. The test is performed twice; one for when the multi-process feature
is turned on, one for off.
gdb/ChangeLog:
2020-01-10 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* inferior.c (print_inferior): Switch inferior before printing it.
gdb/testsuite/ChangeLog:
2020-01-10 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* gdb.multi/multi-target.exp (setup): Factor out "info
connections" and "info inferiors" tests to ...
(test_info_inferiors): ... this new procedure.
(top level): Run new "info-inferiors" tests.
With multi-target, each inferior now has its own target connection.
The problem in switch_to_program_space_and_thread is that in the
current state GDB switches to "no thread" and also sets the program
space but because the inferior is not switched, potentially an
incorrect target remains selected.
Here is a sample scenario that exploits this flow:
On terminal 1, start a gdbserver on a program named foo:
$ gdbserver :1234 ./foo
On terminal 2, start gdb on a program named bar. Suppose foo and bar
are compiled from foo.c and bar.c. They are completely separate. So,
bar.c:2 has no meaning for foo.
$ gdb -q ./bar
Reading symbols from ./bar...
(gdb) add-inferior
[New inferior 2]
Added inferior 2
(gdb) inferior 2
[Switching to inferior 2 [<null>] (<noexec>)]
(gdb) target remote :1234
...
(gdb) set debug remote 2
(gdb) break bar.c:2
Sending packet: $Hgp0.0#ad...Packet received: OK
Sending packet: $m5fa,12#f8...Packet received: E01
Sending packet: $m5fa,1#c6...Packet received: E01
Sending packet: $m5fb,3#c9...Packet received: E01
Sending packet: $m5fe,1#ca...Packet received: E01
Breakpoint 1 at 0x5fe: file bar.c, line 2.
(gdb)
Here we have an unnecessary sending of the packets to the gdbserver.
With this fix in progspace-and-thread.c, we'll get this:
(gdb) break bar.c:2
Breakpoint 1 at 0x5fe: file bar.c, line 2.
(gdb)
Now there is no sending of the packets to gdbserver.
The changes around clear_symtab_users calls are necessary because
otherwise we regress gdb.base/step-over-exit.exp, hitting the new
assertion in switch_to_program_space_and_thread. The problem is, a
forked child terminates, and when GDB decides to auto-purge that
inferior, GDB tries to switch to the pspace of that no-longer-existing
inferior.
The root of the problem is within the program_space destructor:
program_space::~program_space ()
{
...
set_current_program_space (this); # (1)
...
breakpoint_program_space_exit (this); # (2)
...
free_all_objfiles (); # (3)
...
}
We get here from delete_inferior -> delete_program_space.
So we're deleting an inferior, and the inferior to be
deleted is no longer in the inferior list.
At (2), we've deleted all the breakpoints and locations for the
program space being deleted.
The crash happens while doing a breakpoint re-set, called by
clear_symtab_users at the tail end of (3). That is, while recreating
breakpoints for the current program space, which is the program space
we're tearing down. During breakpoint re-set, we try to switch to the
new location's pspace (the current pspace set in (1), so the pspace
we're tearing down) with switch_to_program_space_and_thread, and that
hits the failed assertion. It's the fact that we recreate breakpoints
in the program_space destructor that is the latent bug here. Just
don't do that, and we don't end up in the crash situation.
My first approach to fix this added a symfile_add_flags parameter to
program_space::free_all_objfiles, and then passed that down to
clear_symtab_users. The program_space dtor would then pass down
SYMFILE_DEFER_BP_RESET to free_all_objfiles. I couldn't help feeling
that adding that parameter to free_all_objfiles looked a little
awkward, so I settled on something a little different -- hoist the
clear_symtab_users call to the callers. There are only two callers.
I felt that that didn't look as odd, particularly since
remove_symbol_file_command also does:
objf->unlink ();
clear_symtab_users (0);
I.e., objfile deletion is already separate from calling
clear_symtab_users in some places.
gdb/ChangeLog:
2020-01-10 Aleksandar Paunovic <aleksandar.paunovic@intel.com>
Pedro Alves <palves@redhat.com>
* progspace-and-thread.c (switch_to_program_space_and_thread):
Assert there's an inferior for PSPACE. Use
switch_to_inferior_no_thread to switch the inferior too.
* progspace.c (program_space::~program_space): Call
clear_symtab_users here, with SYMFILE_DEFER_BP_RESET.
(program_space::free_all_objfiles): Don't call clear_symtab_users
here.
* symfile.c (symbol_file_clear): Call clear_symtab_users here.
gdb/testsuite/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* gdb.server/bkpt-other-inferior.exp: New file.
This commit documents the new multi-target features in both NEWS and
user manual.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* NEWS: Mention multi-target debugging, "info connections", and
"add-inferior -no-connection".
gdb/doc/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Starting): Say "current inferior not connected"
instead of "GDB not connected".
(Inferiors and Programs): Rename node to ...
(Inferiors Connections and Programs): ... this. Update all
references. Talk about multiple target connections. Update "info
inferiors" info to mention the connections column. Describe "info
connections". Document "add-inferior -no-connection".
* guile.texi, python.texi: Update cross references.
Currently, we can only support resuming multiple targets at the same
time if all targets are in non-stop mode (or user-visible all-stop
mode with target backend in non-stop mode).
This patch makes GDB error out if the user tries to resume more than
one target at the same time and one of the resumed targets isn't in
non-stop mode:
(gdb) info inferiors
Num Description Connection Executable
1 process 15303 1 (native) a.out
* 2 process 15286 2 (extended-remote :9999) a.out
(gdb) set schedule-multiple on
(gdb) c
Continuing.
Connection 2 (extended-remote :9999) does not support multi-target resumption.
This is here later in the series instead of in the main multi-target
patch because it depends the previous patch, which added
process_stratum_target::connection_string().
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* infrun.c: Include "target-connection.h".
(check_multi_target_resumption): New.
(proceed): Call it.
* target-connection.c (make_target_connection_string): Make
extern.
* target-connection.h (make_target_connection_string): Declare.
This commit extends the CLI a bit for multi-target, in three ways.
#1 - New "info connections" command.
This is a new command that lists the open connections (process_stratum
targets). For example, if you're debugging two remote connections, a
couple local/native processes, and a core dump, all at the same time,
you might see something like this:
(gdb) info connections
Num What Description
1 remote 192.168.0.1:9999 Remote serial target in gdb-specific protocol
2 remote 192.168.0.2:9998 Remote serial target in gdb-specific protocol
* 3 native Native process
4 core Local core dump file
#2 - New "info inferiors" "Connection" column
You'll also see a new matching "Connection" column in "info
inferiors", showing you which connection an inferior is bound to:
(gdb) info inferiors
Num Description Connection Executable
1 process 18526 1 (remote 192.168.0.1:9999) target:/tmp/a.out
2 process 18531 2 (remote 192.168.0.2:9998) target:/tmp/a.out
3 process 19115 3 (native) /tmp/prog1
4 process 6286 4 (core) myprogram
* 5 process 19122 3 (native) /bin/hello
#3 - Makes "add-inferior" show the inferior's target connection
"add-inferior" now shows you the connection you've just bound the
inferior to, which is the current process_stratum target:
(gdb) add-inferior
[New inferior 2]
Added inferior 2 on connection 1 (extended-remote localhost:2346)
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* Makefile.in (COMMON_SFILES): Add target-connection.c.
* inferior.c (uiout_field_connection): New function.
(print_inferior): Add new "connection-id" column.
(add_inferior_command): Show connection number/string of added
inferior.
* process-stratum-target.h
(process_stratum_target::connection_string): New virtual method.
(process_stratum_target::connection_number): New field.
* remote.c (remote_target::connection_string): New override.
* target-connection.c: New file.
* target-connection.h: New file.
* target.c (decref_target): Remove process_stratum targets from
the connection list.
(target_stack::push): Add process_stratum targets to the
connection list.
gdb/testsuite/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* gdb.base/kill-detach-inferiors-cmd.exp: Adjust expected output
of "add-inferior".
* gdb.base/quit-live.exp: Likewise.
* gdb.base/remote-exec-file.exp: Likewise.
* gdb.guile/scm-progspace.exp: Likewise.
* gdb.linespec/linespec.exp: Likewise.
* gdb.mi/new-ui-mi-sync.exp: Likewise.
* gdb.mi/user-selected-context-sync.exp: Likewise.
* gdb.multi/multi-target.exp (setup): Add "info connection" and
"info inferiors" tests.
* gdb.multi/remove-inferiors.exp: Adjust expected output of
"add-inferior".
* gdb.multi/watchpoint-multi.exp: Likewise.
* gdb.python/py-inferior.exp: Likewise.
* gdb.server/extended-remote-restart.exp: Likewise.
* gdb.threads/fork-plus-threads.exp: Adjust expected output of
"info inferiors".
* gdb.threads/forking-threads-plus-breakpoint.exp: Likewise.
* gdb.trace/report.exp: Likewise.
This commit reverts:
commit 5f5219fc34
Author: Pedro Alves <palves@redhat.com>
AuthorDate: Tue Apr 12 16:49:30 2016 +0100
Remove unused struct serial::name field
The following patches will add uses for the field.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
Revert:
2016-04-12 Pedro Alves <palves@redhat.com>
* serial.c (serial_open, serial_fdopen_ops, do_serial_close):
Remove references to name.
* serial.h (struct serial) <name>: Delete.
Since each inferior has its own target stack, the stratum condition
for the "error out if debugging something" check is always false.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* gdbarch-selftests.c (register_to_value_test): Remove "target
already pushed" check.
This commit adds multi-target support to GDB. What this means is that
with this commit, GDB can now be connected to different targets at the
same time. E.g., you can debug a live native process and a core dump
at the same time, connect to multiple gdbservers, etc.
Actually, the word "target" is overloaded in gdb. We already have a
target stack, with pushes several target_ops instances on top of one
another. We also have "info target" already, which means something
completely different to what this patch does.
So from here on, I'll be using the "target connections" term, to mean
an open process_stratum target, pushed on a target stack. This patch
makes gdb have multiple target stacks, and multiple process_stratum
targets open simultaneously. The user-visible changes / commands will
also use this terminology, but of course it's all open to debate.
User-interface-wise, not that much changes. The main difference is
that each inferior may have its own target connection.
A target connection (e.g., a target extended-remote connection) may
support debugging multiple processes, just as before.
Say you're debugging against gdbserver in extended-remote mode, and
you do "add-inferior" to prepare to spawn a new process, like:
(gdb) target extended-remote :9999
...
(gdb) start
...
(gdb) add-inferior
Added inferior 2
(gdb) inferior 2
[Switching to inferior 2 [<null>] (<noexec>)]
(gdb) file a.out
...
(gdb) start
...
At this point, you have two inferiors connected to the same gdbserver.
With this commit, GDB will maintain a target stack per inferior,
instead of a global target stack.
To preserve the behavior above, by default, "add-inferior" makes the
new inferior inherit a copy of the target stack of the current
inferior. Same across a fork - the child inherits a copy of the
target stack of the parent. While the target stacks are copied, the
targets themselves are not. Instead, target_ops is made a
refcounted_object, which means that target_ops instances are
refcounted, which each inferior counting for a reference.
What if you want to create an inferior and connect it to some _other_
target? For that, this commit introduces a new "add-inferior
-no-connection" option that makes the new inferior not share the
current inferior's target. So you could do:
(gdb) target extended-remote :9999
Remote debugging using :9999
...
(gdb) add-inferior -no-connection
[New inferior 2]
Added inferior 2
(gdb) inferior 2
[Switching to inferior 2 [<null>] (<noexec>)]
(gdb) info inferiors
Num Description Executable
1 process 18401 target:/home/pedro/tmp/main
* 2 <null>
(gdb) tar extended-remote :10000
Remote debugging using :10000
...
(gdb) info inferiors
Num Description Executable
1 process 18401 target:/home/pedro/tmp/main
* 2 process 18450 target:/home/pedro/tmp/main
(gdb)
A following patch will extended "info inferiors" to include a column
indicating which connection an inferior is bound to, along with a
couple other UI tweaks.
Other than that, debugging is the same as before. Users interact with
inferiors and threads as before. The only difference is that
inferiors may be bound to processes running in different machines.
That's pretty much all there is to it in terms of noticeable UI
changes.
On to implementation.
Since we can be connected to different systems at the same time, a
ptid_t is no longer a unique identifier. Instead a thread can be
identified by a pair of ptid_t and 'process_stratum_target *', the
later being the instance of the process_stratum target that owns the
process/thread. Note that process_stratum_target inherits from
target_ops, and all process_stratum targets inherit from
process_stratum_target. In earlier patches, many places in gdb were
converted to refer to threads by thread_info pointer instead of
ptid_t, but there are still places in gdb where we start with a
pid/tid and need to find the corresponding inferior or thread_info
objects. So you'll see in the patch many places adding a
process_stratum_target parameter to functions that used to take only a
ptid_t.
Since each inferior has its own target stack now, we can always find
the process_stratum target for an inferior. That is done via a
inf->process_target() convenience method.
Since each inferior has its own target stack, we need to handle the
"beneath" calls when servicing target calls. The solution I settled
with is just to make sure to switch the current inferior to the
inferior you want before making a target call. Not relying on global
context is just not feasible in current GDB. Fortunately, there
aren't that many places that need to do that, because generally most
code that calls target methods already has the current context
pointing to the right inferior/thread. Note, to emphasize -- there's
no method to "switch to this target stack". Instead, you switch the
current inferior, and that implicitly switches the target stack.
In some spots, we need to iterate over all inferiors so that we reach
all target stacks.
Native targets are still singletons. There's always only a single
instance of such targets.
Remote targets however, we'll have one instance per remote connection.
The exec target is still a singleton. There's only one instance. I
did not see the point of instanciating more than one exec_target
object.
After vfork, we need to make sure to push the exec target on the new
inferior. See exec_on_vfork.
For type safety, functions that need a {target, ptid} pair to identify
a thread, take a process_stratum_target pointer for target parameter
instead of target_ops *. Some shared code in gdb/nat/ also need to
gain a target pointer parameter. This poses an issue, since gdbserver
doesn't have process_stratum_target, only target_ops. To fix this,
this commit renames gdbserver's target_ops to process_stratum_target.
I think this makes sense. There's no concept of target stack in
gdbserver, and gdbserver's target_ops really implements a
process_stratum-like target.
The thread and inferior iterator functions also gain
process_stratum_target parameters. These are used to be able to
iterate over threads and inferiors of a given target. Following usual
conventions, if the target pointer is null, then we iterate over
threads and inferiors of all targets.
I tried converting "add-inferior" to the gdb::option framework, as a
preparatory patch, but that stumbled on the fact that gdb::option does
not support file options yet, for "add-inferior -exec". I have a WIP
patchset that adds that, but it's not a trivial patch, mainly due to
need to integrate readline's filename completion, so I deferred that
to some other time.
In infrun.c/infcmd.c, the main change is that we need to poll events
out of all targets. See do_target_wait. Right after collecting an
event, we switch the current inferior to an inferior bound to the
target that reported the event, so that target methods can be used
while handling the event. This makes most of the code transparent to
multi-targets. See fetch_inferior_event.
infrun.c:stop_all_threads is interesting -- in this function we need
to stop all threads of all targets. What the function does is send an
asynchronous stop request to all threads, and then synchronously waits
for events, with target_wait, rinse repeat, until all it finds are
stopped threads. Now that we have multiple targets, it's not
efficient to synchronously block in target_wait waiting for events out
of one target. Instead, we implement a mini event loop, with
interruptible_select, select'ing on one file descriptor per target.
For this to work, we need to be able to ask the target for a waitable
file descriptor. Such file descriptors already exist, they are the
descriptors registered in the main event loop with add_file_handler,
inside the target_async implementations. This commit adds a new
target_async_wait_fd target method that just returns the file
descriptor in question. See wait_one / stop_all_threads in infrun.c.
The 'threads_executing' global is made a per-target variable. Since
it is only relevant to process_stratum_target targets, this is where
it is put, instead of in target_ops.
You'll notice that remote.c includes some FIXME notes. These refer to
the fact that the global arrays that hold data for the remote packets
supported are still globals. For example, if we connect to two
different servers/stubs, then each might support different remote
protocol features. They might even be different architectures, like
e.g., one ARM baremetal stub, and a x86 gdbserver, to debug a
host/controller scenario as a single program. That isn't going to
work correctly today, because of said globals. I'm leaving fixing
that for another pass, since it does not appear to be trivial, and I'd
rather land the base work first. It's already useful to be able to
debug multiple instances of the same server (e.g., a distributed
cluster, where you have full control over the servers installed), so I
think as is it's already reasonable incremental progress.
Current limitations:
- You can only resume more that one target at the same time if all
targets support asynchronous debugging, and support non-stop mode.
It should be possible to support mixed all-stop + non-stop
backends, but that is left for another time. This means that
currently in order to do multi-target with gdbserver you need to
issue "maint set target-non-stop on". I would like to make that
mode be the default, but we're not there yet. Note that I'm
talking about how the target backend works, only. User-visible
all-stop mode works just fine.
- As explained above, connecting to different remote servers at the
same time is likely to produce bad results if they don't support the
exact set of RSP features.
FreeBSD updates courtesy of John Baldwin.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
John Baldwin <jhb@FreeBSD.org>
* aarch64-linux-nat.c
(aarch64_linux_nat_target::thread_architecture): Adjust.
* ada-tasks.c (print_ada_task_info): Adjust find_thread_ptid call.
(task_command_1): Likewise.
* aix-thread.c (sync_threadlists, aix_thread_target::resume)
(aix_thread_target::wait, aix_thread_target::fetch_registers)
(aix_thread_target::store_registers)
(aix_thread_target::thread_alive): Adjust.
* amd64-fbsd-tdep.c: Include "inferior.h".
(amd64fbsd_get_thread_local_address): Pass down target.
* amd64-linux-nat.c (ps_get_thread_area): Use ps_prochandle
thread's gdbarch instead of target_gdbarch.
* break-catch-sig.c (signal_catchpoint_print_it): Adjust call to
get_last_target_status.
* break-catch-syscall.c (print_it_catch_syscall): Likewise.
* breakpoint.c (breakpoints_should_be_inserted_now): Consider all
inferiors.
(update_inserted_breakpoint_locations): Skip if inferiors with no
execution.
(update_global_location_list): When handling moribund locations,
find representative inferior for location's pspace, and use thread
count of its process_stratum target.
* bsd-kvm.c (bsd_kvm_target_open): Pass target down.
* bsd-uthread.c (bsd_uthread_target::wait): Use
as_process_stratum_target and adjust thread_change_ptid and
add_thread calls.
(bsd_uthread_target::update_thread_list): Use
as_process_stratum_target and adjust find_thread_ptid,
thread_change_ptid and add_thread calls.
* btrace.c (maint_btrace_packet_history_cmd): Adjust
find_thread_ptid call.
* corelow.c (add_to_thread_list): Adjust add_thread call.
(core_target_open): Adjust add_thread_silent and thread_count
calls.
(core_target::pid_to_str): Adjust find_inferior_ptid call.
* ctf.c (ctf_target_open): Adjust add_thread_silent call.
* event-top.c (async_disconnect): Pop targets from all inferiors.
* exec.c (add_target_sections): Push exec target on all inferiors
sharing the program space.
(remove_target_sections): Remove the exec target from all
inferiors sharing the program space.
(exec_on_vfork): New.
* exec.h (exec_on_vfork): Declare.
* fbsd-nat.c (fbsd_add_threads): Add fbsd_nat_target parameter.
Pass it down.
(fbsd_nat_target::update_thread_list): Adjust.
(fbsd_nat_target::resume): Adjust.
(fbsd_handle_debug_trap): Add fbsd_nat_target parameter. Pass it
down.
(fbsd_nat_target::wait, fbsd_nat_target::post_attach): Adjust.
* fbsd-tdep.c (fbsd_corefile_thread): Adjust
get_thread_arch_regcache call.
* fork-child.c (gdb_startup_inferior): Pass target down to
startup_inferior and set_executing.
* gdbthread.h (struct process_stratum_target): Forward declare.
(add_thread, add_thread_silent, add_thread_with_info)
(in_thread_list): Add process_stratum_target parameter.
(find_thread_ptid(inferior*, ptid_t)): New overload.
(find_thread_ptid, thread_change_ptid): Add process_stratum_target
parameter.
(all_threads()): Delete overload.
(all_threads, all_non_exited_threads): Add process_stratum_target
parameter.
(all_threads_safe): Use brace initialization.
(thread_count): Add process_stratum_target parameter.
(set_resumed, set_running, set_stop_requested, set_executing)
(threads_are_executing, finish_thread_state): Add
process_stratum_target parameter.
(switch_to_thread): Use is_current_thread.
* i386-fbsd-tdep.c: Include "inferior.h".
(i386fbsd_get_thread_local_address): Pass down target.
* i386-linux-nat.c (i386_linux_nat_target::low_resume): Adjust.
* inf-child.c (inf_child_target::maybe_unpush_target): Remove
have_inferiors check.
* inf-ptrace.c (inf_ptrace_target::create_inferior)
(inf_ptrace_target::attach): Adjust.
* infcall.c (run_inferior_call): Adjust.
* infcmd.c (run_command_1): Pass target to
scoped_finish_thread_state.
(proceed_thread_callback): Skip inferiors with no execution.
(continue_command): Rename 'all_threads' local to avoid hiding
'all_threads' function. Adjust get_last_target_status call.
(prepare_one_step): Adjust set_running call.
(signal_command): Use user_visible_resume_target. Compare thread
pointers instead of inferior_ptid.
(info_program_command): Adjust to pass down target.
(attach_command): Mark target's 'thread_executing' flag.
(stop_current_target_threads_ns): New, factored out from ...
(interrupt_target_1): ... this. Switch inferior before making
target calls.
* inferior-iter.h
(struct all_inferiors_iterator, struct all_inferiors_range)
(struct all_inferiors_safe_range)
(struct all_non_exited_inferiors_range): Filter on
process_stratum_target too. Remove explicit.
* inferior.c (inferior::inferior): Push dummy target on target
stack.
(find_inferior_pid, find_inferior_ptid, number_of_live_inferiors):
Add process_stratum_target parameter, and pass it down.
(have_live_inferiors): Adjust.
(switch_to_inferior_and_push_target): New.
(add_inferior_command, clone_inferior_command): Handle
"-no-connection" parameter. Use
switch_to_inferior_and_push_target.
(_initialize_inferior): Mention "-no-connection" option in
the help of "add-inferior" and "clone-inferior" commands.
* inferior.h: Include "process-stratum-target.h".
(interrupt_target_1): Use bool.
(struct inferior) <push_target, unpush_target, target_is_pushed,
find_target_beneath, top_target, process_target, target_at,
m_stack>: New.
(discard_all_inferiors): Delete.
(find_inferior_pid, find_inferior_ptid, number_of_live_inferiors)
(all_inferiors, all_non_exited_inferiors): Add
process_stratum_target parameter.
* infrun.c: Include "gdb_select.h" and <unordered_map>.
(target_last_proc_target): New global.
(follow_fork_inferior): Push target on new inferior. Pass target
to add_thread_silent. Call exec_on_vfork. Handle target's
reference count.
(follow_fork): Adjust get_last_target_status call. Also consider
target.
(follow_exec): Push target on new inferior.
(struct execution_control_state) <target>: New field.
(user_visible_resume_target): New.
(do_target_resume): Call target_async.
(resume_1): Set target's threads_executing flag. Consider resume
target.
(commit_resume_all_targets): New.
(proceed): Also consider resume target. Skip threads of inferiors
with no execution. Commit resumtion in all targets.
(start_remote): Pass current inferior to wait_for_inferior.
(infrun_thread_stop_requested): Consider target as well. Pass
thread_info pointer to clear_inline_frame_state instead of ptid.
(infrun_thread_thread_exit): Consider target as well.
(random_pending_event_thread): New inferior parameter. Use it.
(do_target_wait): Rename to ...
(do_target_wait_1): ... this. Add inferior parameter, and pass it
down.
(threads_are_resumed_pending_p, do_target_wait): New.
(prepare_for_detach): Adjust calls.
(wait_for_inferior): New inferior parameter. Handle it. Use
do_target_wait_1 instead of do_target_wait.
(fetch_inferior_event): Adjust. Switch to representative
inferior. Pass target down.
(set_last_target_status): Add process_stratum_target parameter.
Save target in global.
(get_last_target_status): Add process_stratum_target parameter and
handle it.
(nullify_last_target_wait_ptid): Clear 'target_last_proc_target'.
(context_switch): Check inferior_ptid == null_ptid before calling
inferior_thread().
(get_inferior_stop_soon): Pass down target.
(wait_one): Rename to ...
(poll_one_curr_target): ... this.
(struct wait_one_event): New.
(wait_one): New.
(stop_all_threads): Adjust.
(handle_no_resumed, handle_inferior_event): Adjust to consider the
event's target.
(switch_back_to_stepped_thread): Also consider target.
(print_stop_event): Update.
(normal_stop): Update. Also consider the resume target.
* infrun.h (wait_for_inferior): Remove declaration.
(user_visible_resume_target): New declaration.
(get_last_target_status, set_last_target_status): New
process_stratum_target parameter.
* inline-frame.c (clear_inline_frame_state(ptid_t)): Add
process_stratum_target parameter, and use it.
(clear_inline_frame_state (thread_info*)): New.
* inline-frame.c (clear_inline_frame_state(ptid_t)): Add
process_stratum_target parameter.
(clear_inline_frame_state (thread_info*)): Declare.
* linux-fork.c (delete_checkpoint_command): Pass target down to
find_thread_ptid.
(checkpoint_command): Adjust.
* linux-nat.c (linux_nat_target::follow_fork): Switch to thread
instead of just tweaking inferior_ptid.
(linux_nat_switch_fork): Pass target down to thread_change_ptid.
(exit_lwp): Pass target down to find_thread_ptid.
(attach_proc_task_lwp_callback): Pass target down to
add_thread/set_running/set_executing.
(linux_nat_target::attach): Pass target down to
thread_change_ptid.
(get_detach_signal): Pass target down to find_thread_ptid.
Consider last target status's target.
(linux_resume_one_lwp_throw, resume_lwp)
(linux_handle_syscall_trap, linux_handle_extended_wait, wait_lwp)
(stop_wait_callback, save_stop_reason, linux_nat_filter_event)
(linux_nat_wait_1, resume_stopped_resumed_lwps): Pass target down.
(linux_nat_target::async_wait_fd): New.
(linux_nat_stop_lwp, linux_nat_target::thread_address_space): Pass
target down.
* linux-nat.h (linux_nat_target::async_wait_fd): Declare.
* linux-tdep.c (get_thread_arch_regcache): Pass target down.
* linux-thread-db.c (struct thread_db_info::process_target): New
field.
(add_thread_db_info): Save target.
(get_thread_db_info): New process_stratum_target parameter. Also
match target.
(delete_thread_db_info): New process_stratum_target parameter.
Also match target.
(thread_from_lwp): Adjust to pass down target.
(thread_db_notice_clone): Pass down target.
(check_thread_db_callback): Pass down target.
(try_thread_db_load_1): Always push the thread_db target.
(try_thread_db_load, record_thread): Pass target down.
(thread_db_target::detach): Pass target down. Always unpush the
thread_db target.
(thread_db_target::wait, thread_db_target::mourn_inferior): Pass
target down. Always unpush the thread_db target.
(find_new_threads_callback, thread_db_find_new_threads_2)
(thread_db_target::update_thread_list): Pass target down.
(thread_db_target::pid_to_str): Pass current inferior down.
(thread_db_target::get_thread_local_address): Pass target down.
(thread_db_target::resume, maintenance_check_libthread_db): Pass
target down.
* nto-procfs.c (nto_procfs_target::update_thread_list): Adjust.
* procfs.c (procfs_target::procfs_init_inferior): Declare.
(proc_set_current_signal, do_attach, procfs_target::wait): Adjust.
(procfs_init_inferior): Rename to ...
(procfs_target::procfs_init_inferior): ... this and adjust.
(procfs_target::create_inferior, procfs_notice_thread)
(procfs_do_thread_registers): Adjust.
* ppc-fbsd-tdep.c: Include "inferior.h".
(ppcfbsd_get_thread_local_address): Pass down target.
* proc-service.c (ps_xfer_memory): Switch current inferior and
program space as well.
(get_ps_regcache): Pass target down.
* process-stratum-target.c
(process_stratum_target::thread_address_space)
(process_stratum_target::thread_architecture): Pass target down.
* process-stratum-target.h
(process_stratum_target::threads_executing): New field.
(as_process_stratum_target): New.
* ravenscar-thread.c
(ravenscar_thread_target::update_inferior_ptid): Pass target down.
(ravenscar_thread_target::wait, ravenscar_add_thread): Pass target
down.
* record-btrace.c (record_btrace_target::info_record): Adjust.
(record_btrace_target::record_method)
(record_btrace_target::record_is_replaying)
(record_btrace_target::fetch_registers)
(get_thread_current_frame_id, record_btrace_target::resume)
(record_btrace_target::wait, record_btrace_target::stop): Pass
target down.
* record-full.c (record_full_wait_1): Switch to event thread.
Pass target down.
* regcache.c (regcache::regcache)
(get_thread_arch_aspace_regcache, get_thread_arch_regcache): Add
process_stratum_target parameter and handle it.
(current_thread_target): New global.
(get_thread_regcache): Add process_stratum_target parameter and
handle it. Switch inferior before calling target method.
(get_thread_regcache): Pass target down.
(get_thread_regcache_for_ptid): Pass target down.
(registers_changed_ptid): Add process_stratum_target parameter and
handle it.
(registers_changed_thread, registers_changed): Pass target down.
(test_get_thread_arch_aspace_regcache): New.
(current_regcache_test): Define a couple local test_target_ops
instances and use them for testing.
(readwrite_regcache): Pass process_stratum_target parameter.
(cooked_read_test, cooked_write_test): Pass mock_target down.
* regcache.h (get_thread_regcache, get_thread_arch_regcache)
(get_thread_arch_aspace_regcache): Add process_stratum_target
parameter.
(regcache::target): New method.
(regcache::regcache, regcache::get_thread_arch_aspace_regcache)
(regcache::registers_changed_ptid): Add process_stratum_target
parameter.
(regcache::m_target): New field.
(registers_changed_ptid): Add process_stratum_target parameter.
* remote.c (remote_state::supports_vCont_probed): New field.
(remote_target::async_wait_fd): New method.
(remote_unpush_and_throw): Add remote_target parameter.
(get_current_remote_target): Adjust.
(remote_target::remote_add_inferior): Push target.
(remote_target::remote_add_thread)
(remote_target::remote_notice_new_inferior)
(get_remote_thread_info): Pass target down.
(remote_target::update_thread_list): Skip threads of inferiors
bound to other targets. (remote_target::close): Don't discard
inferiors. (remote_target::add_current_inferior_and_thread)
(remote_target::process_initial_stop_replies)
(remote_target::start_remote)
(remote_target::remote_serial_quit_handler): Pass down target.
(remote_target::remote_unpush_target): New remote_target
parameter. Unpush the target from all inferiors.
(remote_target::remote_unpush_and_throw): New remote_target
parameter. Pass it down.
(remote_target::open_1): Check whether the current inferior has
execution instead of checking whether any inferior is live. Pass
target down.
(remote_target::remote_detach_1): Pass down target. Use
remote_unpush_target.
(extended_remote_target::attach): Pass down target.
(remote_target::remote_vcont_probe): Set supports_vCont_probed.
(remote_target::append_resumption): Pass down target.
(remote_target::append_pending_thread_resumptions)
(remote_target::remote_resume_with_hc, remote_target::resume)
(remote_target::commit_resume): Pass down target.
(remote_target::remote_stop_ns): Check supports_vCont_probed.
(remote_target::interrupt_query)
(remote_target::remove_new_fork_children)
(remote_target::check_pending_events_prevent_wildcard_vcont)
(remote_target::remote_parse_stop_reply)
(remote_target::process_stop_reply): Pass down target.
(first_remote_resumed_thread): New remote_target parameter. Pass
it down.
(remote_target::wait_as): Pass down target.
(unpush_and_perror): New remote_target parameter. Pass it down.
(remote_target::readchar, remote_target::remote_serial_write)
(remote_target::getpkt_or_notif_sane_1)
(remote_target::kill_new_fork_children, remote_target::kill): Pass
down target.
(remote_target::mourn_inferior): Pass down target. Use
remote_unpush_target.
(remote_target::core_of_thread)
(remote_target::remote_btrace_maybe_reopen): Pass down target.
(remote_target::pid_to_exec_file)
(remote_target::thread_handle_to_thread_info): Pass down target.
(remote_target::async_wait_fd): New.
* riscv-fbsd-tdep.c: Include "inferior.h".
(riscv_fbsd_get_thread_local_address): Pass down target.
* sol2-tdep.c (sol2_core_pid_to_str): Pass down target.
* sol-thread.c (sol_thread_target::wait, ps_lgetregs, ps_lsetregs)
(ps_lgetfpregs, ps_lsetfpregs, sol_update_thread_list_callback):
Adjust.
* solib-spu.c (spu_skip_standalone_loader): Pass down target.
* solib-svr4.c (enable_break): Pass down target.
* spu-multiarch.c (parse_spufs_run): Pass down target.
* spu-tdep.c (spu2ppu_sniffer): Pass down target.
* target-delegates.c: Regenerate.
* target.c (g_target_stack): Delete.
(current_top_target): Return the current inferior's top target.
(target_has_execution_1): Refer to the passed-in inferior's top
target.
(target_supports_terminal_ours): Check whether the initial
inferior was already created.
(decref_target): New.
(target_stack::push): Incref/decref the target.
(push_target, push_target, unpush_target): Adjust.
(target_stack::unpush): Defref target.
(target_is_pushed): Return bool. Adjust to refer to the current
inferior's target stack.
(dispose_inferior): Delete, and inline parts ...
(target_preopen): ... here. Only dispose of the current inferior.
(target_detach): Hold strong target reference while detaching.
Pass target down.
(target_thread_name): Add assertion.
(target_resume): Pass down target.
(target_ops::beneath, find_target_at): Adjust to refer to the
current inferior's target stack.
(get_dummy_target): New.
(target_pass_ctrlc): Pass the Ctrl-C to the first inferior that
has a thread running.
(initialize_targets): Rename to ...
(_initialize_target): ... this.
* target.h: Include "gdbsupport/refcounted-object.h".
(struct target_ops): Inherit refcounted_object.
(target_ops::shortname, target_ops::longname): Make const.
(target_ops::async_wait_fd): New method.
(decref_target): Declare.
(struct target_ops_ref_policy): New.
(target_ops_ref): New typedef.
(get_dummy_target): Declare function.
(target_is_pushed): Return bool.
* thread-iter.c (all_matching_threads_iterator::m_inf_matches)
(all_matching_threads_iterator::all_matching_threads_iterator):
Handle filter target.
* thread-iter.h (struct all_matching_threads_iterator, struct
all_matching_threads_range, class all_non_exited_threads_range):
Filter by target too. Remove explicit.
* thread.c (threads_executing): Delete.
(inferior_thread): Pass down current inferior.
(clear_thread_inferior_resources): Pass down thread pointer
instead of ptid_t.
(add_thread_silent, add_thread_with_info, add_thread): Add
process_stratum_target parameter. Use it for thread and inferior
searches.
(is_current_thread): New.
(thread_info::deletable): Use it.
(find_thread_ptid, thread_count, in_thread_list)
(thread_change_ptid, set_resumed, set_running): New
process_stratum_target parameter. Pass it down.
(set_executing): New process_stratum_target parameter. Pass it
down. Adjust reference to 'threads_executing'.
(threads_are_executing): New process_stratum_target parameter.
Adjust reference to 'threads_executing'.
(set_stop_requested, finish_thread_state): New
process_stratum_target parameter. Pass it down.
(switch_to_thread): Also match inferior.
(switch_to_thread): New process_stratum_target parameter. Pass it
down.
(update_threads_executing): Reimplement.
* top.c (quit_force): Pop targets from all inferior.
(gdb_init): Don't call initialize_targets.
* windows-nat.c (windows_nat_target) <get_windows_debug_event>:
Declare.
(windows_add_thread, windows_delete_thread): Adjust.
(get_windows_debug_event): Rename to ...
(windows_nat_target::get_windows_debug_event): ... this. Adjust.
* tracefile-tfile.c (tfile_target_open): Pass down target.
* gdbsupport/common-gdbthread.h (struct process_stratum_target):
Forward declare.
(switch_to_thread): Add process_stratum_target parameter.
* mi/mi-interp.c (mi_on_resume_1): Add process_stratum_target
parameter. Use it.
(mi_on_resume): Pass target down.
* nat/fork-inferior.c (startup_inferior): Add
process_stratum_target parameter. Pass it down.
* nat/fork-inferior.h (startup_inferior): Add
process_stratum_target parameter.
* python/py-threadevent.c (py_get_event_thread): Pass target down.
gdb/gdbserver/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* fork-child.c (post_fork_inferior): Pass target down to
startup_inferior.
* inferiors.c (switch_to_thread): Add process_stratum_target
parameter.
* lynx-low.c (lynx_target_ops): Now a process_stratum_target.
* nto-low.c (nto_target_ops): Now a process_stratum_target.
* linux-low.c (linux_target_ops): Now a process_stratum_target.
* remote-utils.c (prepare_resume_reply): Pass the target to
switch_to_thread.
* target.c (the_target): Now a process_stratum_target.
(done_accessing_memory): Pass the target to switch_to_thread.
(set_target_ops): Ajust to use process_stratum_target.
* target.h (struct target_ops): Rename to ...
(struct process_stratum_target): ... this.
(the_target, set_target_ops): Adjust.
(prepare_to_access_memory): Adjust comment.
* win32-low.c (child_xfer_memory): Adjust to use
process_stratum_target.
(win32_target_ops): Now a process_stratum_target.
Another bug exposed by gdb.server/extended-remote-restart.exp in the
multi-target work is that remote_target::start_remote can leave
inferior_ptid and current_inferior() out of sync:
(top-gdb) p current_inferior_->pid
$1 = 29541
(top-gdb) p inferior_ptid
$2 = {m_pid = 29540, m_lwp = 29540, m_tid = 0}
This is caused by writing to inferior_ptid directly instead of using
switch_to_thread. Also, "inferior_list->thread_list->ptid" assumes
that we want the first thread of the first inferior, but that inferior
may not have threads, or with multi-target, that target may be
connected to some other target.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* remote.c (remote_target::start_remote): Don't set inferior_ptid
directly. Instead find the first thread in the thread list and
use switch_to_thread.
The multi-target patch will change the remote target's behavior when:
- the current inferior is connected to an extended-remote target.
- the current inferior is attached to any process.
- some other inferior than than the current one is live.
In current master, we get:
(gdb) tar extended-remote :9999
A program is being debugged already. Kill it? (y or n)
While after multi-target, since each inferior may have its own target
connection, we'll get:
(gdb) tar extended-remote :9999
Already connected to a remote target. Disconnect? (y or n)
That change made gdb.server/extended-remote-restart.exp expose a gdb
bug, because it made "target remote", via gdb_reconnect, just
disconnect from the previous connection, while in current master that
command would kill the inferior before disconnecting. In turn, that
would make a multi-target gdb find processes already running under
control of gdbserver as soon as it reconnects, while in current master
there is never any process around when gdb reconnects, since they'd
all been killed prior to disconnection.
The bug this exposed is that remote_target::remote_add_inferior was
always reusing current_inferior() for the new process, even if the
current inferior was already bound to a process. In the testcase's
case, when we reconnect, the remote is debugging two processes. So
we'd bind the first remote process to the empty current inferior the
first time, and then bind the second remote process to the same
inferior again, essencially losing track of the first process. That
resulted in failed assertions when we look up the inferior for the
first process by PID. The fix is to still prefer binding to the
current inferior (so that plain "target remote" keeps doing what you'd
expect), but not reuse the current inferior if it is already bound to
a process.
This patch tweaks the test to explicitly disconnect before
reconnecting, to avoid GDB killing processes, thus making current GDB
behave the same as it will behave when the multi-target work lands.
That change alone without the GDB fix exposes the bug like so:
(gdb) PASS: gdb.server/extended-remote-restart.exp: kill: 0, follow-child 0: disconnect
target extended-remote localhost:2350
Remote debugging using localhost:2350
src/gdb/thread.c:93: internal-error: thread_info* inferior_thread(): Assertion `tp' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
The original bug that the testcase was written for was related to
killing, (git 9d4a934ce6 ("gdb: Fix assert for extended-remote
target (PR gdb/18050)")), but since the testcase tries reconnecting
with both explicitly killing and not explicitly killing, I think we're
covering the original bug with this testcase change.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* remote.c (remote_target::remote_add_inferior): Don't bind a
process to the current inferior if the current inferior is already
bound to a process.
gdb/testsuite/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* gdb.server/extended-remote-restart.exp (test_reload): Explicitly
disconnect before reconnecting.
The multi-target patch makes inferior_ptid point to null_ptid before
calling into target_wait, which catches bad uses of inferior_ptid,
since the current selected thread in gdb shouldn't have much relation
to the thread that reports an event.
One such bad use is found in remote_target::remote_parse_stop_reply,
where we handle the 'W' or 'X' packets (process exit), and the remote
target does not support the multi-process extensions, i.e., it does
not report the PID of the process that exited.
With the multi-target patch, that would result in a failed assertion,
trying to find the inferior for process pid 0.
gdb/ChangeLog:
2020-01-10 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Pedro Alves <palves@redhat.com>
* remote.c (remote_target::remote_parse_stop_reply) <W/X packets>:
If no process is specified, return null_ptid instead of
inferior_ptid.
(remote_target::wait_as): Handle TARGET_WAITKIND_EXITED /
TARGET_WAITKIND_SIGNALLED with no pid.
gdb/testsuite/ChangeLog:
2020-01-10 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Pedro Alves <palves@redhat.com>
* gdb.server/connect-without-multi-process.exp: Also test
continuing to end.
With current master, on a Fedora 27 machine with a kernel with buggy
watchpoint support, I see:
(gdb) PASS: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: hardware breakpoints work
continue
Continuing.
warning: Remote failure reply: E01
Remote communication error. Target disconnected.: Connection reset by peer.
(gdb) FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoints work
continue
The program is not being run.
(gdb) FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: breakpoint after the first fork (the program is no longer running)
The FAILs themselves aren't what's interesting here. What is
interesting is that with the main multi-target patch applied, I was getting this:
(gdb) PASS: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: hardware breakpoints work
continue
Continuing.
warning: Remote failure reply: E01
/home/pedro/brno/pedro/gdb/binutils-gdb-2/build/../src/gdb/inferior.c:285: internal-error: inferior* find_inferior_pid(process_stratum_target*, int): Assertion `pid != 0' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoints work (GDB internal error)
The problem is that in remote_target::wait_as, we're hitting this:
switch (buf[0])
{
case 'E': /* Error of some sort. */
/* We're out of sync with the target now. Did it continue or
not? Not is more likely, so report a stop. */
rs->waiting_for_stop_reply = 0;
warning (_("Remote failure reply: %s"), buf);
status->kind = TARGET_WAITKIND_STOPPED;
status->value.sig = GDB_SIGNAL_0;
break;
which leaves event_ptid as null_ptid. At the end of the function, we then reach:
else if (status->kind != TARGET_WAITKIND_EXITED
&& status->kind != TARGET_WAITKIND_SIGNALLED)
{
if (event_ptid != null_ptid)
record_currthread (rs, event_ptid);
else
event_ptid = inferior_ptid; <<<<< here
}
and the trouble is that with the multi-target patch, we'll get here
with inferior_ptid as null_ptid too. That is done exactly to find
these implicit assumptions that inferior_ptid is a good choice for
default thread, which isn't generaly true.
I first thought of fixing this in the "case 'E'" path, but, given that
this "event_ptid = inferior_ptid" path is also taken when the remote
target does not support threads at all, no thread-related packets or
extensions, it's better to fix it in latter path, to handle all
scenarios that miss reporting a thread.
That's what this patch does.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* remote.c (first_remote_resumed_thread): New.
(remote_target::wait_as): Use it as default event_ptid instead of
inferior_ptid.
It's not possible to open a tfile target with an invalid trace_fd, and
it's not possible to close a closed target, so this early return is dead.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* tracefile-tfile.c (tfile_target::close): Assert that trace_fd is
not -1.
- Make get_last_target_status arguments optional. A following patch
will add another argument to get_last_target_status (the event's
target), and passing nullptr when we don't care for some piece of
info is handier than creating dummy local variables.
- Declare nullify_last_target_wait_ptid in a header, and remove the
local extern declaration from linux-fork.c.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* break-catch-sig.c (signal_catchpoint_print_it): Don't pass a
ptid to get_last_target_status.
* break-catch-syscall.c (print_it_catch_syscall): Don't pass a
ptid to get_last_target_status.
* infcmd.c (continue_command): Don't pass a target_waitstatus to
get_last_target_status.
(info_program_command): Don't pass a target_waitstatus to
get_last_target_status.
* infrun.c (init_wait_for_inferior): Use
nullify_last_target_wait_ptid.
(get_last_target_status): Handle nullptr arguments.
(nullify_last_target_wait_ptid): Clear target_last_waitstatus.
(print_stop_event): Don't pass a ptid to get_last_target_status.
(normal_stop): Don't pass a ptid to get_last_target_status.
* infrun.h (get_last_target_status, set_last_target_status): Move
comments here and update.
(nullify_last_target_wait_ptid): Declare.
* linux-fork.c (fork_load_infrun_state): Remove local extern
declaration of nullify_last_target_wait_ptid.
* linux-nat.c (get_detach_signal): Don't pass a target_waitstatus
to get_last_target_status.
Once each inferior has its own target stack, we'll need to make sure
that the right inferior is selected before we call into target
methods.
It kind of sounds worse than it is in practice. Not that many places
need to be concerned.
In thread.c, we add a new switch_to_thread_if_alive function that
centralizes the switching before calls to target_thread_alive. Other
cases are handled with explicit switching.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* gdbthread.h (scoped_restore_current_thread)
<dont_restore, restore, m_dont_restore>: Declare.
* thread.c (thread_alive): Add assertion. Return bool.
(switch_to_thread_if_alive): New.
(prune_threads): Switch inferior/thread.
(print_thread_info_1): Switch thread before calling target methods.
(scoped_restore_current_thread::restore): New, factored out from
...
(scoped_restore_current_thread::~scoped_restore_current_thread):
... this.
(scoped_restore_current_thread::scoped_restore_current_thread):
Add assertion.
(thread_apply_all_command, thread_select): Use
switch_to_thread_if_alive.
* infrun.c (proceed, restart_threads, handle_signal_stop)
(switch_back_to_stepped_thread): Switch current thread before
calling target methods.
Several places want to switch context to an inferior and its pspace,
while at the same time switch to "no thread selected". This commit
adds a function that does that, and uses it in a few places.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* inferior.c (switch_to_inferior_no_thread): New function,
factored out from ...
(inferior_command): ... here.
* inferior.h (switch_to_inferior_no_thread): Declare.
* mi/mi-main.c (run_one_inferior): Use
switch_to_inferior_no_thread.
I believe this comment:
/* Killing off the inferior can leave us with a core file. If
so, print the state we are left in. */
Referred to the fact that a decade ago, by design, GDB would let you
type "run" when debugging a core dump, keeping the core open. That
"run" would push a process_stratum target on the target stack for the
live process, and, the core would remain open -- we used to have a
core_stratum. When the live process was killed/detached or exited,
GDB would go back to debugging the core, since the core_stratum target
was now at the top of the stack. That design had a number of
problems, see here for example:
https://sourceware.org/ml/gdb-patches/2008-08/msg00290.html
In 2010, core_stratum was finaly eliminated and cores now have
process_stratum too, with commit c0edd9edad ("Make core files the
process_stratum."). Pushing a live process on the stack while you're
debugging a core discards the core completely.
I also thought that this might be in use with checkpoints, but it does
not -- "kill" when you have multiple checkpoints kills all the
checkpoints.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* infcmd.c (kill_command): Remove dead code.
I believe the tail end of remote_target::mourn_inferior is broken, and
it's been broken for too long to even bother trying to fix. Most
probably nobody needs it. If the code is reached and we find the
target is running, we'd need to resync the thread list, at least,
since generic_mourn_inferior got rid of all the threads in the
inferior, otherwise, we'd hit an assertion on the next call to
inferior_thread(), for example. A "correct" fix would probably
involve restarting the whole remote_target::start_remote requence,
exactly as if we had completely disconnected and reconnected from
scratch.
Note that regular stub debugging usually uses plain target remote, but
this code is only reachable in target extended-mode:
- The !remote_multi_process_p check means that it's only reacheable if
the stub does not support multi-process. I.e., there can only ever
be one live process.
- remote_target::mourn_inferior has this at the top:
/* In 'target remote' mode with one inferior, we close the connection. */
if (!rs->extended && number_of_live_inferiors () <= 1)
{
unpush_target (this);
/* remote_close takes care of doing most of the clean up. */
generic_mourn_inferior ();
return;
}
Which means that if we only had one live inferior (which for our
case, must be true), we'll have closed the connection already,
unless we're in extended-remote mode.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* remote.c (remote_target::mourn_inferior): No longer check
whether the target is running.
With the multi-target work, each inferior will have its own target
stack, so to call a target method, we'll need to make sure that the
inferior in question is the current one, otherwise target->beneath()
calls will find the target beneath in the wrong inferior.
In some places, it's much more convenient to be able to check whether
an inferior has execution without having to switch to it in order to
call target_has_execution on the right inferior/target stack, to avoid
side effects with switching inferior/thread/program space.
The current target_ops::has_execution method takes a ptid_t as
parameter, which, in a multi-target world, isn't sufficient to
identify the target. This patch prepares to address that, by changing
the parameter to an inferior pointer instead. From the inferior,
we'll be able to query its target stack to tell which target is
beneath.
Also adds a new inferior::has_execution() method to make callers a bit
more natural to read.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* corelow.c (core_target::has_execution): Change parameter type to
inferior pointer.
* inferior.c (number_of_live_inferiors): Use
inferior::has_execution instead of target_has_execution_1.
* inferior.h (inferior::has_execution): New.
* linux-thread-db.c (thread_db_target::update_thread_list): Use
inferior::has_execution instead of target_has_execution_1.
* process-stratum-target.c
(process_stratum_target::has_execution): Change parameter type to
inferior pointer. Check the inferior's PID instead of
inferior_ptid.
* process-stratum-target.h
(process_stratum_target::has_execution): Change parameter type to
inferior pointer.
* record-full.c (record_full_core_target::has_execution): Change
parameter type to inferior pointer.
* target.c (target_has_execution_1): Change parameter type to
inferior pointer.
(target_has_execution_current): Adjust.
* target.h (target_ops::has_execution): Change parameter type to
inferior pointer.
(target_has_execution_1): Change parameter type to inferior
pointer. Change return type to bool.
* tracefile.h (tracefile_target::has_execution): Change parameter
type to inferior pointer.
Commit 20f0d60db4 ("Avoid crash when calling warning too early"),
added a "current_top_target () != NULL" check to
target_supports_terminal_ours, so this check in exceptions.c is now
obsolete.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* exceptions.c (print_flush): Remove current_top_target() check.
The "set remote exec-file" setting is per-inferior, but the "show
remote exec-file" command always shows the last set exec-file,
irrespective of the current inferior. E.g.:
# Set inferior 1's exec-file:
(gdb) set remote exec-file prog1
# Add inferior 2, switch to it, and set its exec-file:
(gdb) add-inferior
Added inferior 2
(gdb) inferior 2
(gdb) set remote exec-file prog2
# Switch back to inferior 1, and show its exec-file:
(gdb) inferior 1
(gdb) show remote exec-file
prog2
^^^^^ should show "prog1" instead here.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* remote.c (show_remote_exec_file): Show the current inferior's
exec-file instead of the command variable's value.
gdb/testsuite/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* gdb.base/remote-exec-file.exp: New file.
The multi-target patch sets inferior_ptid to null_ptid before handling
a target event, and thus before calling target_wait, in order to catch
places in target_ops::wait implementations that are incorrectly
relying on inferior_ptid (which could otherwise be a ptid of a
different target, for example). That caught this instance in
record-full.c.
Fix it by saving the last resumed ptid, and then using it in
record_full_wait_1, just like how the last "step" argument passed to
record_full_target::resume is handled too.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* record-full.c (record_full_resume_ptid): New global.
(record_full_target::resume): Set it.
(record_full_wait_1): Use record_full_resume_ptid instead of
inferior_ptid.
In non-stop mode, if you resume the program in the background (with
"continue&", for example), then gdb makes sure to not switch the
current thread behind your back. That means that you can be sure that
the commands you type apply to the thread you selected, even if some
other thread that was running in the background hits some event just
while you're typing.
In all-stop mode, however, if you resume the program in the
background, gdb let's the current thread switch behind your back.
This is bogus, of course. All-stop and non-stop background
resumptions should behave the same.
This patch fixes that, and adds a testcase that exposes the bad
behavior in current master.
The fork-running-state.exp changes are necessary because that
preexisting testcase was expecting the old behavior:
Before:
continue &
Continuing.
(gdb)
[Attaching after process 8199 fork to child process 8203]
[New inferior 2 (process 8203)]
info threads
Id Target Id Frame
1.1 process 8199 "fork-running-st" (running)
* 2.1 process 8203 "fork-running-st" (running)
(gdb)
After:
continue &
Continuing.
(gdb)
[Attaching after process 24660 fork to child process 24664]
[New inferior 2 (process 24664)]
info threads
Id Target Id Frame
* 1.1 process 24660 "fork-running-st" (running)
2.1 process 24664 "fork-running-st" (running)
(gdb)
Here we see that before this patch GDB switches current inferior to
the new inferior behind the user's back, as a side effect of handling
the fork.
The delete_exited_threads call in inferior_appeared is there to fix an
issue that Baris found in a previous version of this patch. The
fetch_inferior_event change increases the refcount of the current
thread, and in case the fetched inferior event denotes a thread exit,
the thread will not be deleted right away. A non-deleted but exited
thread stays in the inferior's thread list. This, in turn, causes the
"init_thread_list" call in inferior.c to be skipped. A consequence is
that the global thread ID counter is not restarted if the current
thread exits, and then the inferior is restarted:
(gdb) start
Temporary breakpoint 1 at 0x4004d6: file main.c, line 21.
Starting program: /tmp/main
Temporary breakpoint 1, main () at main.c:21
21 foo ();
(gdb) info threads -gid
Id GId Target Id Frame
* 1 1 process 16106 "main" main () at main.c:21
(gdb) c
Continuing.
[Inferior 1 (process 16106) exited normally]
(gdb) start
Temporary breakpoint 2 at 0x4004d6: file main.c, line 21.
Starting program: /tmp/main
Temporary breakpoint 2, main () at main.c:21
21 foo ();
(gdb) info threads -gid
Id GId Target Id Frame
* 1 2 process 16138 "main" main () at main.c:21
^^^
Notice that GId == 2 above. It should have been "1" instead.
The new tids-git-reset.exp testcase exercises the problem above.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* gdbthread.h (scoped_restore_current_thread)
<dont_restore, restore, m_dont_restore>: Declare.
* thread.c (thread_alive): Add assertion. Return bool.
(switch_to_thread_if_alive): New.
(prune_threads): Switch inferior/thread.
(print_thread_info_1): Switch thread before calling target methods.
(scoped_restore_current_thread::restore): New, factored out from
...
(scoped_restore_current_thread::~scoped_restore_current_thread):
... this.
(scoped_restore_current_thread::scoped_restore_current_thread):
Add assertion.
(thread_apply_all_command, thread_select): Use
switch_to_thread_if_alive.
gdb/testsuite/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* gdb.base/fork-running-state.exp (do_test): Adjust expected
output.
* gdb.threads/async.c: New.
* gdb.threads/async.exp: New.
* gdb.multi/tids-gid-reset.c: New.
* gdb.multi/tids-gid-reset.exp: New.
According to the SystemTap documentation on user-space probes[0], stap
probe points without semaphores are denoted by setting the semaphore
address in the probe's note to zero. At present the code does do a
comparison of the semaphore address against zero, but only after it's
been relocated; as such it will (almost?) always fail, commonly
resulting in GDB trying to overwrite the ELF magic located at the
image's base address.
This commit tests the address as specified in the SDT note rather than
the relocated value in order to correctly detect absent probe
semaphores.
[0]: https://sourceware.org/systemtap/wiki/UserSpaceProbeImplementation
gdb/Changelog:
2020-01-11 George Barrett <bob@bob131.so>
* stap-probe.c (stap_modify_semaphore): Don't check for null
semaphores.
(stap_probe::set_semaphore, stap_probe::clear_semaphore): Check
for null semaphores.
gdb/testsuite/ChangeLog:
2020-01-11 George Barrett <bob@bob131.so>
* gdb.base/stap-probe.c (relocation_marker): Add dummy variable
to help in finding the image relocation offset.
* gdb.base/stap-probe.exp (stap_test): Accept arbitrary compile
options in arguments.
(stap_test_no_debuginfo): Likewise.
(stap-probe-nosem-noopt-pie, stap-probe-nosem-noopt-nopie): Add
test variants.
(stap_test): Add null semaphore relocation test.
Until recently when the source window was scrolled the assembler
window would scroll in sync - keeping the disassembly for the current
line in view.
This was broken in commit:
commit b4b49dcbff
Date: Wed Nov 13 16:47:58 2019 -0700
Don't call tui_show_source from tui_ui_out
This commit restores the synchronised scrolling and also maintains the
horizontal scroll within the source view when it is vertically
scrolled, something that was broken before.
This commit does not mean that scrolling the assembler view scrolls
the source view. The connection this way never existed, though maybe
it should, but I'll leave adding this feature for a separate commit.
gdb/ChangeLog:
* tui/tui-source.c (tui_source_window::do_scroll_vertical): Update
all source windows, and maintain horizontal scroll status while
doing so.
gdb/testsuite/ChangeLog:
* gdb.tui/basic.exp: Add more scrolling tests.
Change-Id: I250114a3bc670040a6a759d41905776771b2f818
Hannes Domani pointed out that my previous patch to fix the "list"
command in the TUI instead broke vertical scrolling. While looking at
this, I found that do_scroll_vertical calls print_source_lines, which
seems like a very roundabout way to change the source window. This
patch removes this oddity and fixes the bug at the same time.
I've added a new test case. This is somewhat tricky, because the
obvious approach of sending a dummy command after the scroll did not
work -- due to how the TUI works, sennding a command causes the scroll
to take effect.
gdb/ChangeLog
2019-12-22 Tom Tromey <tom@tromey.com>
PR tui/18932:
* tui/tui-source.c (tui_source_window::do_scroll_vertical): Call
update_source_window, not print_source_lines.
gdb/testsuite/ChangeLog
2019-12-22 Tom Tromey <tom@tromey.com>
PR tui/18932:
* lib/tuiterm.exp (Term::wait_for): Rename from _accept. Return a
meangingful value.
(Term::command, Term::resize): Update.
* gdb.tui/basic.exp: Add scrolling test.
Change-Id: I9636a7c8a8cade37431c6165ee996a9d556ef1c8
Tom Tromey
Tom Tromey
Tom de Vries
Christian Biesinger
Simon Marchi
Kevin Buettner
Andrew Burgess
Simon Marchi
Hannes Domani
John Baldwin
Tankut Baris Aktemur
Luis Machado
Sergio Durigan Junior
Jon Turney
Aaron Merey
Jérémie Galarneau
Joel Brobecker
Ali Tamur via gdb-patches
Nelson Chu
Doug Evans
Maciej W. Rozycki
Bernd Edlinger
Richard Biener
Alok Kumar Sharma
Iain Buclaw
Shahab Vahedi
Pedro Alves
Philippe Waroquiers
Nitika Achra
Ali Tamur
George Barrett