Mike Frysinger
bf12d44ee0
sim: fix the PKGVERSION define
...
This should be SIM, not GDB.
2015-04-13 02:41:10 -04:00
Mike Frysinger
122bbfb52a
sim: move sim-engine.o/sim-hrw.o to the common list
...
This makes these two objects available to all sims by default.
2015-04-06 23:56:47 -04:00
H.J. Lu
7fed4b0be6
Regenerate configure in sim
...
* arm/configure: Regenerated.
* avr/configure: Likewise.
* bfin/configure: Likewise.
* common/configure: Likewise.
* cr16/configure: Likewise.
* cris/configure: Likewise.
* d10v/configure: Likewise.
* erc32/configure: Likewise.
* frv/configure: Likewise.
* ft32/configure: Likewise.
* h8300/configure: Likewise.
* igen/configure: Likewise.
* iq2000/configure: Likewise.
* lm32/configure: Likewise.
* m32c/configure: Likewise.
* m32r/configure: Likewise.
* m68hc11/configure: Likewise.
* mcore/configure: Likewise.
* microblaze/configure: Likewise.
* mips/configure: Likewise.
* mn10300/configure: Likewise.
* moxie/configure: Likewise.
* msp430/configure: Likewise.
* ppc/configure: Likewise.
* rl78/configure: Likewise.
* rx/configure: Likewise.
* sh/configure: Likewise.
* sh64/configure: Likewise.
* v850/configure: Likewise.
2015-04-02 05:43:07 -07:00
H.J. Lu
0ceaf1ec96
Regenerate configure in sim
...
* arm/configure: Regenerated.
* avr/configure: Likewise.
* bfin/configure: Likewise.
* common/configure: Likewise.
* cr16/configure: Likewise.
* cris/configure: Likewise.
* d10v/configure: Likewise.
* erc32/configure: Likewise.
* frv/configure: Likewise.
* ft32/configure: Likewise.
* h8300/configure: Likewise.
* igen/configure: Likewise.
* iq2000/configure: Likewise.
* lm32/configure: Likewise.
* m32c/configure: Likewise.
* m32r/configure: Likewise.
* m68hc11/configure: Likewise.
* mcore/configure: Likewise.
* microblaze/configure: Likewise.
* mips/configure: Likewise.
* mn10300/configure: Likewise.
* moxie/configure: Likewise.
* msp430/configure: Likewise.
* ppc/configure: Likewise.
* rl78/configure: Likewise.
* rx/configure: Likewise.
* sh/configure: Likewise.
* sh64/configure: Likewise.
* v850/configure: Likewise.
2015-04-01 10:15:13 -07:00
Mike Frysinger
0fe84f3fbe
sim: run: punt!
...
Now that all targets have been converted to nrun, we can finally punt
this old inconsistent interface.
A few stray references to the old run were sprinkled about; clean them
up in the process.
We leave behind the run(1) man page mostly so that we get it updated for
the new nrun interface.
2015-04-01 01:22:44 -04:00
Mike Frysinger
aadc9410ba
sim: update zlib handling
...
With zlib being mandatory, and the updated m4 configs, we need to regen
and use the new settings w/bfd to avoid linkage errors.
2015-04-01 01:07:57 -04:00
Mike Frysinger
9943d3185a
sim: avr: convert to nrun.o
...
Looks like a lot more work than actually was -- the main decode loop
was de-indented by dropping the loop as a step-once function.
2015-03-28 05:35:29 -04:00
Mike Frysinger
ae7d0cac8c
sim: rename tconfig.in to tconfig.h
...
Rather than manually include tconfig.h when we think we'll need it (which
is error prone as it can define symbols we expect from config.h), have it
be included directly by config.h. Since we know we have to include that
header everywhere already, this will make sure tconfig.h isn't missed.
It should also be fine as tconfig.h is supposed to be simple and only set
up a few core defines for the target.
This allows us to stop symlinking it in place all the time and just use
it straight out of the respective source directory.
2015-03-16 01:23:52 -04:00
Mike Frysinger
465fb143c8
sim: make nrun the default run program
...
We want people to stop using the run.c frontend, but it's hard to notice
when it's still set as the default. Lets flip things so nrun.c is the
default, and users of run.c will get an error by default. We turn that
error into a warning for existing sims so we don't break them -- this is
mostly meant for people starting new ports.
2015-03-14 07:02:58 -04:00
Mike Frysinger
4c4ca605d5
sim: drop unused sim_kill function
...
This has been deprecated for a long time and no one calls it.
2015-02-19 20:42:14 -05:00
Joel Brobecker
32d0add0a6
Update year range in copyright notice of all files owned by the GDB project.
...
gdb/ChangeLog:
Update year range in copyright notice of all files.
2015-01-01 13:32:14 +04:00
Alan Modra
2974be626b
Fix --diable-shared --enable-plugins build breakage
...
Directories that don't use libtool need to add -ldl (on most *nix
hosts) to provide dlopen for libbfd.
config/
* plugins.m4 (AC_PLUGINS): If plugins are enabled, add -ldl to
LIBS via AC_SEARCH_LIBS.
gdb/
* acinclude.m4 (GDB_AC_CHECK_BFD): Don't add -ldl.
* config.in: Regenerate.
sim/ppc/
* configure.ac: Invoke AC_PLUGINS.
* config.in: Regenerate.
and regen lots of configure files.
2014-08-19 21:59:56 +09:30
Roland McGrath
faa743bb1b
Regenerate sim configury.
2014-08-15 15:51:50 -07:00
Mike Frysinger
60d847df0b
sim: constify arg to sim_do_command
...
It is rare for people to want to modify the cmd arg. In general, they
really shouldn't be, but a few still do. For those who misbehave, dupe
the string locally so they can bang on it.
2014-03-10 22:57:29 -04:00
Mike Frysinger
b2b255bdf3
sim: constify prog_name
...
There's no need for the prog_name handed down to the core to be mutable,
so add const markings to it and all the related funcs.
2014-03-05 01:42:44 -05:00
Joel Brobecker
ecd75fc8ee
Update Copyright year range in all files maintained by GDB.
2014-01-01 07:54:24 +04:00
Alan Modra
bf3d9781ec
Regenerate sim configure files to pick up support for powerpc64le in
...
libtool.m4.
2013-09-23 00:32:27 +00:00
Mike Frysinger
31e6ad7d64
sim: use AM_MAINTAINER_MODE
...
I noticed the sim code is using an old implementation of the maintainer logic.
I cut it over to the new macro (like gdb has been doing). In practice, it
makes no difference currently as nothing in the sim tree uses it, but I have a
follow up commit for the Blackfin tree that needs it.
2013-06-05 01:42:13 +00:00
Steve Ellcey
3cb2ab1a46
gdb:
...
2013-03-15 Steve Ellcey <sellcey@mips.com>
* remote-sim.c (sim_command_completer): Make char arguments const.
include:
2013-03-15 Steve Ellcey <sellcey@mips.com>
* gdb/remote-sim.h (sim_command_completer): Make char arguments const.
sim:
2013-03-15 Steve Ellcey <sellcey@mips.com>
* arm/wrapper.c (sim_complete_command): Make char arguments const.
* avr/interp.c (sim_complete_command): Ditto.
* common/sim-options.c (sim_complete_command): Ditto.
* cr16/interp.c (sim_complete_command): Ditto.
* erc32/interf.c (sim_complete_command): Ditto.
* m32c/gdb-if.c (sim_complete_command): Ditto.
* microblaze/interp.c (sim_complete_command): Ditto.
* ppc/sim_calls.c (sim_complete_command): Ditto.
* rl78/gdb-if.c (sim_complete_command): Ditto.
* rx/gdb-if.c (sim_complete_command): Ditto.
* sh/interp.c (sim_complete_command): Ditto.
2013-03-15 17:53:44 +00:00
Joel Brobecker
8acc9f485b
Update years in copyright notice for the GDB files.
...
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
2013-01-01 06:41:43 +00:00
H.J. Lu
6bb11ab3b2
Fix sim build when configured with --enable-plugins
...
* common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS
condition.
* common/acinclude.m4: Define lt_cv_dlopen_libs.
* arm/configure: Regenerate.
* avr/configure: Regenerate.
* bfin/configure: Regenerate.
* common/configure: Regenerate.
* cr16/configure: Regenerate.
* cris/configure: Regenerate.
* d10v/configure: Regenerate.
* erc32/configure: Regenerate.
* frv/configure: Regenerate.
* h8300/configure: Regenerate.
* igen/configure: Regenerate.
* iq2000/configure: Regenerate.
* lm32/configure: Regenerate.
* m32c/configure: Regenerate.
* m32r/configure: Regenerate.
* m68hc11/configure: Regenerate.
* mcore/configure: Regenerate.
* microblaze/configure: Regenerate.
* mips/configure: Regenerate.
* mn10300/configure: Regenerate.
* moxie/configure: Regenerate.
* ppc/configure: Regenerate.
* rl78/configure: Regenerate.
* rx/configure: Regenerate.
* sh/configure: Regenerate.
* sh64/configure: Regenerate.
* testsuite/configure: Regenerate.
* v850/configure: Regenerate.
2012-11-20 14:41:26 +00:00
Joel Brobecker
5f3ef9d035
Define PACKAGE macro in all sims' config.h.
...
Some of the common includes in include/gdb such as callback.h
include bfd.h. But there was a recent change in bfd-in.h to
require that config.h be included before bfd.h can be included:
/* PR 14072: Ensure that config.h is included first. */
#if !defined PACKAGE && !defined PACKAGE_VERSION
#error config.h must be included before this header
#endif
PACKAGE_VERSION is always defined by default by the AC_INIT autoconf
macro, but PACKAGE isn't. This patch updates the SIM_AC_COMMON macro
to define it, and then regenerates all configure scripts and config.in
files.
sim/common/changeLog:
* acinclude.m4 (SIM_AC_COMMON): Define PACKAGE.
* config.in, configure: Regenerate.
sim/ChangeLog:
* configure: Regenerate.
sim/arm/ChangeLog:
* config.in, configure: Regenerate.
sim/avr/ChangeLog:
* config.in, configure: Regenerate.
sim/bfin/ChangeLog:
* config.in, configure: Regenerate.
sim/cr16/ChangeLog:
* config.in, configure: Regenerate.
sim/cris/ChangeLog:
* config.in, configure: Regenerate.
sim/d10v/ChangeLog:
* config.in, configure: Regenerate.
sim/erc32/ChangeLog:
* config.in, configure: Regenerate.
sim/frv/ChangeLog:
* config.in, configure: Regenerate.
sim/h8300/ChangeLog:
* config.in, configure: Regenerate.
sim/iq2000/ChangeLog:
* config.in, configure: Regenerate.
sim/lm32/ChangeLog:
* config.in, configure: Regenerate.
sim/m32c/ChangeLog:
* config.in, configure: Regenerate.
sim/m32r/ChangeLog:
* config.in, configure: Regenerate.
sim/m68hc11/ChangeLog:
* config.in, configure: Regenerate.
sim/mcore/ChangeLog:
* config.in, configure: Regenerate.
sim/microblaze/ChangeLog:
* config.in, configure: Regenerate.
sim/mips/ChangeLog:
* config.in, configure: Regenerate.
sim/mn10300/ChangeLog:
* config.in, configure: Regenerate.
sim/moxie/ChangeLog:
* config.in, configure: Regenerate.
sim/ppc/ChangeLog:
* configure: Regenerate.
sim/rl78/ChangeLog:
* config.in, configure: Regenerate.
sim/rx/ChangeLog:
* config.in, configure: Regenerate.
sim/sh/ChangeLog:
* config.in, configure: Regenerate.
sim/sh64/ChangeLog:
* config.in, configure: Regenerate.
sim/v850/ChangeLog:
* config.in, configure: Regenerate.
sim/testsuite/ChangeLog:
* configure: Regenerate.
2012-06-15 17:20:10 +00:00
Pedro Alves
a493e3e2e4
gdb/
...
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
gdb/gdbserver/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
include/gdb/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
* gdb/signals.def: Replace TARGET_SIGNAL_ with GDB_SIGNAL_
throughout.
sim/arm/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/avr/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/common/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/cr16/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/d10v/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/erc32/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/m32c/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/ppc/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/rl78/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
sim/rx/
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
2012-05-24 16:51:47 +00:00
Mike Frysinger
2232061b1c
[PATCH] sim: make sure to include strsignal prototype
...
Before POSIX standardized strsignal(), old systems would hide the
prototype unless the normal extension defines were enabled. So use
the AC_USE_SYSTEM_EXTENSIONS helper for that.
Then make sure we include string.h ourselves in nrun.c rather than
relying on implicit includes via other sim headers.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-03-24 05:38:43 +00:00
Joel Brobecker
c5a5708100
Copyright year update in most files of the GDB Project.
...
gdb/ChangeLog:
Copyright year update in most files of the GDB Project.
2012-01-04 08:28:28 +00:00
Mike Frysinger
db2e4d67e7
sim: generate build dependencies on the fly
...
Lift the code that GDB is using to generate dependencies on the fly and
port it over to the sim. Now people shouldn't have to manually maintain
these in their Makefile's.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-12-03 18:23:51 +00:00
Mike Frysinger
9c082ca86e
sim: rename common/aclocal.m4 to common/acinclude.m4
...
Automake likes to dump macros automatically used into the aclocal.m4
file, but the common/aclocal.m4 naming prevents that. So rename it
to the more normal "acinclude.m4" so the aclocal tool can work.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-18 00:31:00 +00:00
Mike Frysinger
6ffe910a7e
sim: move from common.m4 to SIM_AC_COMMON
...
Now that the sourceware tree generally requires autoconf-2.64, update
the sim tree to require that too.
This allows us to drop the long standing SIM_AC_COMMON/common.m4
workaround as autoconf 2.64+ seems to work for me.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-18 00:17:24 +00:00
Mike Frysinger
af9f7da78b
sim: add sim_complete_command stubs for non-common-using ports
...
For the ports that don't use the common/ subdir, we need to add stub funcs
to them to avoid build failures with gdb and command completion. These do
not implement the actual completion functionality ... any port that wants
that can either convert to the common/ subdir, or fill out the function on
their own time.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-16 18:16:36 +00:00
Joel Brobecker
7b6bb8daac
run copyright.sh for 2011.
2011-01-01 15:34:07 +00:00
Mike Frysinger
5558e7e691
sim: constify sim_write source buffer (part 2)
...
As pointed out by Sandra Loosemore, a bunch of targets define sim_write
themselves instead of using the common/ code. So constify them too.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-04-14 07:38:06 +00:00
Ralf Wildenhues
3725885a65
Sync Libtool from GCC.
...
/:
* libtool.m4: Sync from git Libtool.
* ltmain.sh: Likewise.
* ltoptions.m4: Likewise.
* ltversion.m4: Likewise.
* lt~obsolete.m4: Likewise.
sim/iq2000/:
* configure: Regenerate.
sim/d10v/:
* configure: Regenerate.
sim/m32r/:
* configure: Regenerate.
sim/frv/:
* configure: Regenerate.
sim/:
* avr/configure: Regenerate.
* cris/configure: Regenerate.
* microblaze/configure: Regenerate.
sim/h8300/:
* configure: Regenerate.
sim/mn10300/:
* configure: Regenerate.
sim/erc32/:
* configure: Regenerate.
sim/arm/:
* configure: Regenerate.
sim/m68hc11/:
* configure: Regenerate.
sim/lm32/:
* configure: Regenerate.
sim/sh64/:
* configure: Regenerate.
sim/v850/:
* configure: Regenerate.
sim/cr16/:
* configure: Regenerate.
sim/moxie/:
* configure: Regenerate.
sim/m32c/:
* configure: Regenerate.
sim/mips/:
* configure: Regenerate.
sim/mcore/:
* configure: Regenerate.
sim/sh/:
* configure: Regenerate.
gprof/:
* Makefile.in: Regenerate.
* configure: Regenerate.
opcodes/:
* Makefile.in: Regenerate.
* configure: Regenerate.
gas/:
* Makefile.in: Regenerate.
* configure: Regenerate.
* doc/Makefile.in: Regenerate.
ld/:
* configure: Regenerate.
gdb/testsuite/:
* gdb.cell/configure: Regenerate.
binutils/:
* Makefile.in: Regenerate.
* configure: Regenerate.
* doc/Makefile.in: Regenerate.
bfd/:
* Makefile.in: Regenerate.
* configure: Regenerate.
bfd/doc/:
* Makefile.in: Regenerate.
2010-01-09 21:11:44 +00:00
Joel Brobecker
dc3cf14f35
Update copyright notices to add year 2010.
2010-01-01 10:03:36 +00:00
Joel Brobecker
5912faddb2
* common/aclocal.m4: Add include of ../../config/zlib.m4.
...
* common/common.m4: Use AM_ZLIB to check for zlib support.
* ppc/configure.ac: Likewise.
* arm/configure, avr/configure, common/configure, cr16/configure,
cris/configure, d10v/configure, erc32/configure, frv/configure,
h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
m32r/configure, m68hc11/configure, mcore/configure,
microblaze/configure, mips/configure, mn10300/configure,
moxie/configure, ppc/configure, sh/configure, sh64/configure,
v850/configure: Regenerate.
2009-11-24 22:58:08 +00:00
Tristan Gingold
8f0ac70082
2009-11-12 Tristan Gingold <gingold@adacore.com>
...
* avr/interp.c (sim_write): Allow byte access.
(sim_read): Ditto.
2009-11-12 15:24:04 +00:00
Tristan Gingold
33bcfade88
2009-11-12 Tristan Gingold <gingold@adacore.com>
...
* avr/interp.c (sim_load): Clear memory before loading.
2009-11-12 15:17:42 +00:00
Tristan Gingold
46b5151381
2009-11-09 Tristan Gingold <gingold@adacore.com>
...
* avr/interp.c (sim_resume): Fix typo for OP_ret.
2009-11-09 13:50:30 +00:00
Tristan Gingold
244d525937
2009-10-23 Tristan Gingold <gingold@adacore.com>
...
* avr/interp.c (sim_stop): Return 1.
2009-10-23 09:14:32 +00:00
Ralf Wildenhues
81ecdfbb4d
Regenerate tree using Autoconf 2.64 and Automake 1.11.
...
config/:
* override.m4 (_GCC_AUTOCONF_VERSION): Bump to 2.64.
/:
* configure: Regenerate.
etc/:
* configure: Regenerate.
sim/common/:
* config.in: Regenerate.
* configure: Likewise.
sim/iq2000/:
* config.in: Regenerate.
* configure: Likewise.
sim/d10v/:
* config.in: Regenerate.
* configure: Likewise.
sim/igen/:
* config.in: Regenerate.
* configure: Likewise.
sim/m32r/:
* config.in: Regenerate.
* configure: Likewise.
sim/frv/:
* config.in: Regenerate.
* configure: Likewise.
sim/:
* avr/config.in: Regenerate.
* avr/configure: Likewise.
* configure: Likewise.
* cris/config.in: Likewise.
* cris/configure: Likewise.
sim/h8300/:
* config.in: Regenerate.
* configure: Likewise.
sim/mn10300/:
* config.in: Regenerate.
* configure: Likewise.
sim/ppc/:
* config.in: Regenerate.
* configure: Likewise.
sim/erc32/:
* config.in: Regenerate.
* configure: Likewise.
sim/arm/:
* config.in: Regenerate.
* configure: Likewise.
sim/m68hc11/:
* config.in: Regenerate.
* configure: Likewise.
sim/lm32/:
* config.in: Regenerate.
* configure: Likewise.
sim/sh64/:
* config.in: Regenerate.
* configure: Likewise.
sim/v850/:
* config.in: Regenerate.
* configure: Likewise.
sim/cr16/:
* config.in: Regenerate.
* configure: Likewise.
sim/moxie/:
* config.in: Regenerate.
* configure: Likewise.
sim/m32c/:
* config.in: Regenerate.
* configure: Likewise.
sim/mips/:
* config.in: Regenerate.
* configure: Likewise.
sim/mcore/:
* config.in: Regenerate.
* configure: Likewise.
sim/testsuite/d10v-elf/:
* configure: Regenerate.
sim/testsuite/:
* configure: Regenerate.
sim/testsuite/frv-elf/:
* configure: Regenerate.
sim/testsuite/m32r-elf/:
* configure: Regenerate.
sim/testsuite/mips64el-elf/:
* configure: Regenerate.
sim/sh/:
* config.in: Regenerate.
* configure: Likewise.
gold/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
* configure: Likewise.
* testsuite/Makefile.in: Likewise.
gprof/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* configure: Likewise.
* gconfig.in: Likewise.
opcodes/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
* configure: Likewise.
gas/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
* configure: Likewise.
* doc/Makefile.in: Likewise.
ld/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
* configure: Likewise.
gdb/:
* aclocal.m4: Regenerate.
* config.in: Likewise.
* configure: Likewise.
* gnulib/Makefile.in: Likewise.
gdb/doc/:
* configure: Regenerate.
gdb/gdbserver/:
* aclocal.m4: Regenerate.
* config.in: Likewise.
* configure: Likewise.
gdb/testsuite/:
* configure: Regenerate.
* gdb.hp/configure: Likewise.
* gdb.hp/gdb.aCC/configure: Likewise.
* gdb.hp/gdb.base-hp/configure: Likewise.
* gdb.hp/gdb.compat/configure: Likewise.
* gdb.hp/gdb.defects/configure: Likewise.
* gdb.hp/gdb.objdbg/configure: Likewise.
* gdb.stabs/configure: Likewise.
binutils/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
* configure: Likewise.
* doc/Makefile.in: Likewise.
bfd/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
* configure: Likewise.
bfd/doc/:
* Makefile.in: Regenerate.
readline/:
* configure: Regenerate.
readline/examples/rlfe/:
* configure: Regenerate.
2009-08-22 16:56:56 +00:00
Ralf Wildenhues
d6416cdc23
Fixup readline and sim including of override.m4
...
readline/examples/rlfe/:
* configure.in: m4_include toplevel config/override.m4.
* configure: Regenerate.
readline/ChangeLog.gdb:
* configure.in: m4_include toplevel config/override.m4.
* configure: Regenerate.
sim/:
* configure.ac: m4_include toplevel config/override.m4.
* configure: Regenerate.
* avr/configure: Regenerate.
* cris/configure: Regenerate.
sim/common/:
* aclocal.m4: m4_include toplevel config/override.m4.
* configure: Regenerate.
sim/iq2000/:
* configure: Regenerate.
sim/d10v/:
* configure: Regenerate.
sim/igen/:
* configure: Regenerate.
sim/m32r/:
* configure: Regenerate.
sim/frv/:
* configure: Regenerate.
sim/h8300/:
* configure: Regenerate.
sim/mn10300/:
* configure: Regenerate.
sim/ppc/:
* configure: Regenerate.
sim/erc32/:
* configure: Regenerate.
sim/arm/:
* configure: Regenerate.
sim/m68hc11/:
* configure: Regenerate.
sim/lm32/:
* configure: Regenerate.
sim/sh64/:
* configure: Regenerate.
sim/v850/:
* configure: Regenerate.
sim/cr16/:
* configure: Regenerate.
sim/moxie/:
* configure: Regenerate.
sim/m32c/:
* configure: Regenerate.
sim/mips/:
* configure: Regenerate.
sim/mcore/:
* configure: Regenerate.
sim/sh/:
* configure: Regenerate.
2009-08-22 11:36:40 +00:00
Tristan Gingold
df1756f414
2009-04-27 Tristan Gingold <gingold@adacore.com>
...
* avr: New directory.
* avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
* avr/config.in: New file, generated by autoheader.
* avr/configure: New file generated by autoconf.
* configure.ac: Add avr.
* configure: Regenerated.
2009-04-27 10:50:53 +00:00