* h8300-tdep.c: Include "gdb_assert.h".
(h8300_print_register): Add gdbarch, file and frame parameters.
Use frame_read_unsigned_register to read the register's value.
Use fprintf_filtered to display output.
(h8300_print_registers_info): Replace h8300_do_registers_info.
(h8300_gdbarch_init): Set print_registers_info.
`set architecture'. Unify naming convention of functions.
(h8300_skip_prologue): Improve prologue analysis.
(h8300_push_arguments): Rewritten to more closely match GCC's
bizarre argument-passing behavior, along with the comment describing
said behavior.
* remote-hms.c (hms_regnames): Don't use NUM_REGS in definition.
* config/h8300/tm-h8300.h: Multiarch. Just keep stuff needed by
sim, remote-e7000.c, remote-hms.c and remote.c
h8300_frame_args_address from frame_args_address.
(FRAME_LOCALS_ADDRESS): Changed to use h8300_frame_locals_address
from frame_locals_address.
(PRINT_REGISTER_HOOK): Changed to use h8300_print_register_hook
from print_register_hook.
(h8300_frame_args_address): Declare.
(h8300_frame_find_saved_regs): Declare.
(h8300_frame_locals_address): Declare.
(h8300_frame_saved_pc): Declare.
(h8300_pop_frame): Declare.
(h8300_print_register_hook): Declare.
* h8300-tdep.c (h8300_frame_find_saved_regs): Removed declaration.
(h8300_frame_args_address): Renamed from frame_args_address.
(h8300_frame_locals_address): Renamed from frame_locals_address.
(h8300_pop_frame): Renamed from pop_frame.
(h8300_print_register_hook): Renamed from print_register_hook.
-------------------------------------------------------------------
* h8300-tdep.c (original_register_names, h8300h_register_names,
h8300_register_names): Define new variables.
(set_register_names): New function to set register names based on
current CPU type.
(h8300_command, h8300h_command, h8300s_command): Call
set_register_names.
* config/h8300/tm-h8300.h (h8300_register_names): Declare.
(REGISTER_NAME): Define to refer to h8300_register_names.
Add two pointers (saved_regs, extra_info) to struct frame_info.
Introduce new macro FRAME_INIT_SAVED_REGS which replaces
FRAME_FIND_SAVED_REGS.
Document.
Use in mn10300 and rs6000 targets. Fix side effects on ALPHA, MIPS,
Z8K and SPARC targets.
Added some generic target-independant code for managing call-dummy frames.
Wed Nov 27 10:32:14 1996 Michael Snyder <msnyder@cleaver.cygnus.com>
* breakpoint.c: DELETE command will not delete CALL_DUMMY breakpoint.
* blockframe.c: Add target-independant support for managing
CALL_DUMMY frames on the host side.
* frame.h: Declarations for generic CALL_DUMMY frame support.
* h8300-tdep.c: Add target function calls using generic frame support.
* config/h8300/tm-h8300.h: config for generic target function calls.
start-sanitize-m32r
* m32r-tdep.c: Add target function calls using generic frame support.
* config/m32r/tm-m32r.h: config for generic target function calls.
end-sanitize-m32r
* sh-tdep.c: Add target function calls using generic frame support.
* config/sh/tm-sh.h: config for generic target function calls.
start-sanitize-v850
* v850-tdep.c: Add target function calls using generic frame support.
* config/v850/tm-v850.h: config for generic target function calls.
end-sanitize-v850
* valops.c: ADD PUSH_RETURN_ADDRESS so that it doesn't have to be
done by PUSH_ARGUMENTS when there's no CALL_DUMMY.
(IS_MOVE_FP, IS_MOV_SP_FP): Accept H8/300H varaints.
(IS_SUB4_SP, IS_SUBL_SP): New macros.
(h8300_skip_prologue): Handle H8/300H prologue code sequences.
(examine_prologue): Handle addresses from 0x010000 to 0xffffff
when in H8/300H mode. Get the return pointer's address correctly
for the H8/300H. Handle H8/300H prolouge code sequences.
Avoiding major breakage on the H8/300H, and on the eval board. Jeez, did
anyone even try to debug H8/300H code with gdb in the past?!?
C_STAT symbols.
* h8300-tdep.c (h8300_pop_frame): Reset $sp and $pc correctly.
Flush cached frames just before exiting.
* remote-sim.c (gdbsim_resume): Complain if the program isn't
being run.
* config/h8300/tm-h8300.h (BELIEVE_PCC_PROMOTION): Define.
Fix some bugs exposed by the testsuite. HMSE.
hooks.
(call_extra_exec_file_hooks): New function.
* h8300-tdep.c: Lint; add .h files to provide missing declarations,
remove unused variables.
(set_machine_hook): New function.
(_initialize_h8300m): Initialize it.
PR 8849.
and stack pointer during stepping, to speed things up.
A. Changes to not select a frame until we need a selected frame:
* blockframe.c (flush_cached_frames): Call select_frame (NULL, -1).
* infrun.c (wait_for_inferior): Move call to select_frame back to
normal_stop. This reverts a change of 13 Apr 94 (it says Jeff
Law, but the change was my idea); the only reason for that change
was so we could save and restore the selected frame in
wait_for_inferior, and now that flush_cached frames clears the
selected frame, that should work OK now.
B. Changes to not create a current_frame until we need one:
* blockframe.c (get_current_frame): If current_frame is NULL, try
to create an innermost frame.
* sparc-tdep.c (sparc_pop_frame), infcmd.c (run-stack_dummy),
infrun.c (wait_for_inferior), thread.c (thread_switch),
convex-tdep.c (set_thread_command), a29k-tdep.c (pop_frame),
alpha-tdep.c (alpha_pop_frame), convex-xdep.c (core_file_command),
h8300-tdep.c (h8300_pop_frame), h8500-tdep.c (h8300_pop_frame),
hppa-tdep.c (hppa_pop_frame), i386-tdep.c (i386_pop_frame),
i960-tdep.c (pop_frame), m68k-tdep.c
(m68k_pop_frame), mips-tdep.c (mips_pop_frame), rs6000-tdep.c
(push_dummy_frame, pop_dummy_frame, pop_frame), sh-tdep.c
(pop_frame), config/arm/tm-arm.h (POP_FRAME),
config/convex/tm-convex.h (POP_FRAME), config/gould/tm-pn.h
(POP_FRAME), config/ns32k/tm-merlin.h (POP_FRAME),
config/ns32k/tm-umax.h (POP_FRAME), config/tahoe/tm-tahoe.h
(POP_FRAME), config/vax/tm-vax.h (POP_FRAME): Don't
call create_new_frame.
* corelow.c (core_open), altos-xdep.c (core_file_command),
arm-xdep.c (core_file_command), gould-xdep.c (core_file_command),
m3-nat.c (select_thread), sun386-nat.c (core_file_command),
umax-xdep.c (core_file_command): Don't call create_new_frame; do
call flush_cached_frames.
* blockframe.c (reinit_frame_cache): Don't call create_new_frame
or select_frame.
C. Changes to get rid of stop_frame_address and instead only
fetch the frame pointer when we need it.
* breakpoint.c (bpstat_stop_status): Remove argument
frame_address; use FRAME_FP (get_current_frame ()).
* infrun.c (wait_for_inferior): Don't pass frame pointer to
bpstat_stop_status.
* infrun.c (wait_for_inferior): Use FRAME_FP (get_current_frame
()) instead of stop_frame_address.
* infrun.c (save_inferior_status, restore_inferior_status),
inferior.h (struct inferior_status): Don't save and restore
stop_frame_address.
* inferior.h, infcmd.c, thread.c (thread_switch), m3-nat.c
(select_thread): Remove stop_frame_address and uses thereof.
D. Same thing for the stack pointer.
* infrun.c (wait_for_inferior): Remove stop_sp and replace
uses thereof with read_sp ().
E. Change to eliminate one nasty little spot where we were
wanting to know the frame pointer from before the current step
(idea from GDB 3.5, which saved my ass, because my other ideas of
how to fix it were very baroque).
* infrun.c: Remove prev_frame_address.
* infrun.c (wait_for_inferior, step_over_function): Use
step_frame_address instead of prev_frame_address.
F. Same basic idea for the stack pointer.
* inferior.h, infcmd.c: New variable step_sp.
* infcmd.c (step_1, until_next_command): Set it.
* infrun.c: Remove prev_sp and replace uses by step_sp.
* infrun.c (wait_for_inferior): If we get out of the step
range, then set step_sp to the current stack pointer before we
start going again.
the end of the list of objfiles, instead of at the beginning.
* xcoffread.c (allocate_include_entry): New function, abstracted
from code in record_include_begin.
(record_include_begin, record_include_end): Call it.
* blockframe.c (reinit_frame_cache): Test inferior_pid instead of
target_has_stack to decide whether to create a real stack frame
for the cache.
* coffread.c (process_coff_symbol) [CXUX_TARGET]: Ignore vendor
section.
* config/m88k/tm-cxux.h (CXUX_TARGET): Define.
* h8300-tdep.c: Include "dis-asm.h" instead of <dis-asm.h>.
(go32_readchar): Special handling for faster polling. (async
structure): Volatile.
* h8300-tdep.c (print_register_hook): Allocate and use the right
number bytes for the raw register.
* h8500-tdep.c (regoff, frame_find_saved_reg, examine_prologue):
deleted. (h8500_register_size, h8500_register_virtual_type, ):
Use new way of counting registers.
* remote-e7000.c (echo_index): deleted. (expect): Better handling
of user interrupts. (expect_prompt): Remove never used log file
support. (want, want_nopc): Add support for H8/300H.
(fetch_regs_from_dump): Treat \r and \n as whitespace.
(e7000_drain): Send an "end" command before waiting for output to
stop. (e7000_wait): Cope with H8/300H, better handling of user
interrupts. (why_stop, expect_n, sub2_from_pc): New function.
* remote-utils.c (gr_load_image): call fflush and QUIT more regularly.
* utils.c (notice_quit): New function for polling for user interrupts.
Andrew Cagney