-z text applies to all dynamic binaries, not just shared libraries.
A lot of the other options needed attention too.
* ld.texinfo (-z): Combine negative options with corresponding
positive option. Sort the table. Expand and correct "combreloc",
"common", "common-page-size", "interpose", "loadfltr",
"max-page-size", "muldefs", "nodefaultlib", "nodelete", "nodlopen",
"nodump", "noextern-protected-data", "now", "origin", and "text".
* ld.texinfo (-z relro): Expand description.
(DATA_SEGMENT_ALIGN): Note that -z relro is not effective when
running with system page size larger than commonpagesize.
(DATA_SEGMENT_RELRO_END): Be explicit about the alignment.
This changes the PowerPC64 --plt-align option to perform the usual
alignment of code as suggested by its name, as well as the previous
behaviour of padding so as to reduce boundary crossing. The old
behaviour is had by using a negative parameter.
The default is also changed to align plt stub code by default to 32
byte boundaries, the point being to get better bctr branch prediction
on power8 and power9 hardware.
bfd/
* elf64-ppp.c (plt_stub_pad): Handle positive and negative
plt_stub_align.
ld/
* ld.texinfo (--plt-align): Describe new behaviour of option.
* emultempl/ppc64elf.em (params): Default plt_stub_align to 5.
* testsuite/ld-powerpc/powerpc.exp: Pass --no-plt-align for
selected tests.
* testsuite/ld-powerpc/relbrlt.d: Pass --no-plt-align.
* testsuite/ld-powerpc/elfv2so.d: Adjust expected output.
* emultempl/elf32.em (handle_option): Accept the -z globalaudit
command line option.
* lexsup.c (elf_static_list_options): Add -z globalaudit.
* ld.texinfo: Document the support for the new command line
option.
* NEWS: Mention the new feature.
* testsuite/ld-elf/audit.exp: Add a test of the -z globalaudit
command line option.
* testsuite/ld-elf/globalaudit.rd: New file: Expected output from
readelf.
This makes ld warn about --plt-localentry if a version of glibc
without the necessary ld.so checks is detected, and revises the
documentation.
bfd/
* elf64-ppc.c (ppc64_elf_tls_setup): Warn on --plt-localentry
without ld.so checks.
gold/
* powerpc.cc (Target_powerpc::scan_relocs): Warn on --plt-localentry
without ld.so checks.
ld/
* ld.texinfo (plt-localentry): Revise.
The big comment in ppc64_elf_tls_setup says why. I've also added some
code to the bfd linker that catches the -lpthread -lc symbol
differences and disable generation of optimized call stubs even when
--plt-localentry is activated. Gold doesn't yet have that.
PR 21847
bfd/
* elf64-ppc.c (struct ppc_link_hash_entry): Add non_zero_localentry.
(ppc64_elf_merge_symbol): Set non_zero_localentry.
(is_elfv2_localentry0): Test non_zero_localentry.
(ppc64_elf_tls_setup): Default to --no-plt-localentry.
gold/
* powerpc.cc (Target_powerpc::scan_relocs): Default to
--no-plt-localentry.
ld/
* ld.texinfo (plt-localentry): Document.
This patch adds a new S/390 specific segment type: PT_S390_PGSTE. For
binaries marked with that segment the kernel will allocate 4k page
tables. The only user so far will be qemu.
ld/ChangeLog:
2017-06-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* Makefile.in: Add s390.em as build dependency.
* emulparams/elf64_s390.sh (EXTRA_EM_FILE): Add s390.em.
* emultempl/s390.em: New file.
* gen-doc.texi: Add documentation for --s390-pgste option.
* ld.texinfo: Likewise.
include/ChangeLog:
2017-06-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* elf/s390.h (PT_S390_PGSTE): Define macro.
binutils/ChangeLog:
2017-06-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* readelf.c (get_s390_segment_type): Add support for the new
segment type PT_S390_PGSTE.
(get_segment_type): Call get_s390_segment_type.
elfcpp/ChangeLog:
2017-06-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* elfcpp.h (enum PT): Add PT_S390_PGSTE to enum.
bfd/ChangeLog:
2017-06-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* elf-s390.h: New file.
* elf64-s390.c (struct elf_s390_link_hash_table): Add params
field.
(elf_s390_additional_program_headers): New function.
(elf_s390_modify_segment_map): New function.
(bfd_elf_s390_set_options): New function.
(elf_backend_additional_program_headers)
(elf_backend_modify_segment_map): Add macro definitions.
To support IBT in Intel Control-flow Enforcement Technology (CET)
instructions:
https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf
#define GNU_PROPERTY_X86_FEATURE_1_AND 0xc0000002
#define GNU_PROPERTY_X86_FEATURE_1_IBT (1U << 0)
are added to GNU program properties to indicate that all executable
sections are compatible with IBT when ENDBR instruction starts each
valid target where an indirect branch instruction can land.
GNU_PROPERTY_X86_FEATURE_1_IBT is set on output only if it is set on
all relocatable inputs.
The followings changes are made to the Procedure Linkage Table (PLT):
1. For 64-bit x86-64, PLT is changed to
PLT0: push GOT[1]
bnd jmp *GOT[2]
nop
...
PLTn: endbr64
push namen_reloc_index
bnd jmp PLT0
together with the second PLT section:
PLTn: endbr64
bnd jmp *GOT[namen_index]
nop
BND prefix is also added so that IBT-enabled PLT is compatible with MPX.
2. For 32-bit x86-64 (x32) and i386, PLT is changed to
PLT0: push GOT[1]
jmp *GOT[2]
nop
...
PLTn: endbr64 # endbr32 for i386.
push namen_reloc_index
jmp PLT0
together with the second PLT section:
PLTn: endbr64 # endbr32 for i386.
jmp *GOT[namen_index]
nop
BND prefix isn't used since MPX isn't supported on x32 and BND registers
aren't used in parameter passing on i386.
GOT is an array of addresses. Initially, GOT[namen_index] is filled
with the address of the ENDBR instruction of the corresponding entry
in the first PLT section. The function, namen, is called via the
ENDBR instruction in the second PLT entry. GOT[namen_index] is updated
to the actual address of the function, namen, at run-time.
2 linker command line options are added:
1. -z ibtplt: Generate IBT-enabled PLT.
2. -z ibt: Generate GNU_PROPERTY_X86_FEATURE_1_IBT in GNU program
properties as well as IBT-enabled PLT.
bfd/
* elf32-i386.c (elf_i386_lazy_ibt_plt0_entry): New.
(elf_i386_lazy_ibt_plt_entry): Likewise.
(elf_i386_pic_lazy_ibt_plt0_entry): Likewise.
(elf_i386_non_lazy_ibt_plt_entry): Likewise.
(elf_i386_pic_non_lazy_ibt_plt_entry): Likewise.
(elf_i386_eh_frame_lazy_ibt_plt): Likewise.
(elf_i386_lazy_plt_layout): Likewise.
(elf_i386_non_lazy_plt_layout): Likewise.
(elf_i386_link_hash_entry): Add plt_second.
(elf_i386_link_hash_table): Add plt_second and
plt_second_eh_frame.
(elf_i386_allocate_dynrelocs): Use the second PLT if needed.
(elf_i386_size_dynamic_sections): Use .plt.got unwind info for
the second PLT. Check the second PLT.
(elf_i386_relocate_section): Use the second PLT to resolve
PLT reference if needed.
(elf_i386_finish_dynamic_symbol): Fill and use the second PLT if
needed.
(elf_i386_finish_dynamic_sections): Set sh_entsize on the
second PLT. Generate unwind info for the second PLT.
(elf_i386_plt_type): Add plt_second.
(elf_i386_get_synthetic_symtab): Support the second PLT.
(elf_i386_parse_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND.
(elf_i386_merge_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn
on GNU_PROPERTY_X86_FEATURE_1_IBT
(elf_i386_link_setup_gnu_properties): If info->ibt is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT
for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT
is set on all relocatable inputs.
* elf64-x86-64.c (elf_x86_64_lazy_ibt_plt_entry): New.
(elf_x32_lazy_ibt_plt_entry): Likewise.
(elf_x86_64_non_lazy_ibt_plt_entry): Likewise.
(elf_x32_non_lazy_ibt_plt_entry): Likewise.
(elf_x86_64_eh_frame_lazy_ibt_plt): Likewise.
(elf_x32_eh_frame_lazy_ibt_plt): Likewise.
(elf_x86_64_lazy_ibt_plt): Likewise.
(elf_x32_lazy_ibt_plt): Likewise.
(elf_x86_64_non_lazy_ibt_plt): Likewise.
(elf_x32_non_lazy_ibt_plt): Likewise.
(elf_x86_64_get_synthetic_symtab): Support the second PLT.
(elf_x86_64_parse_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND.
(elf_x86_64_merge_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn
on GNU_PROPERTY_X86_FEATURE_1_IBT
(elf_x86_64_link_setup_gnu_properties): If info->ibt is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT
for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT
is set on all relocatable inputs.
binutils/
* readelf.c (decode_x86_feature): New.
(print_gnu_property_note): Call decode_x86_feature on
GNU_PROPERTY_X86_FEATURE_1_AND.
* testsuite/binutils-all/i386/empty.d: New file.
* testsuite/binutils-all/i386/empty.s: Likewise.
* testsuite/binutils-all/i386/ibt.d: Likewise.
* testsuite/binutils-all/i386/ibt.s: Likewise.
* testsuite/binutils-all/x86-64/empty-x32.d: Likewise.
* testsuite/binutils-all/x86-64/empty.d: Likewise.
* testsuite/binutils-all/x86-64/empty.s: Likewise.
* testsuite/binutils-all/x86-64/ibt-x32.d: Likewise.
* testsuite/binutils-all/x86-64/ibt.d: Likewise.
* testsuite/binutils-all/x86-64/ibt.s: Likewise.
include/
* bfdlink.h (bfd_link_info): Add ibtplt and ibt.
* elf/common.h (GNU_PROPERTY_X86_FEATURE_1_AND): New.
(GNU_PROPERTY_X86_FEATURE_1_IBT): Likewise.
ld/
* Makefile.am (ELF_X86_DEPS): Add $(srcdir)/emulparams/cet.sh.
* Makefile.in: Regenerated.
* NEWS: Mention GNU_PROPERTY_X86_FEATURE_1_IBT, -z ibtplt
and -z ibt.
* emulparams/cet.sh: New file.
* testsuite/ld-i386/ibt-plt-1.d: Likewise.
* testsuite/ld-i386/ibt-plt-1.s: Likewise.
* testsuite/ld-i386/ibt-plt-2.s: Likewise.
* testsuite/ld-i386/ibt-plt-2a.d: Likewise.
* testsuite/ld-i386/ibt-plt-2b.d: Likewise.
* testsuite/ld-i386/ibt-plt-2c.d: Likewise.
* testsuite/ld-i386/ibt-plt-2d.d: Likewise.
* testsuite/ld-i386/ibt-plt-3.s: Likewise.
* testsuite/ld-i386/ibt-plt-3a.d: Likewise.
* testsuite/ld-i386/ibt-plt-3b.d: Likewise.
* testsuite/ld-i386/ibt-plt-3c.d: Likewise.
* testsuite/ld-i386/ibt-plt-3d.d: Likewise.
* testsuite/ld-i386/plt-main-ibt.dd: Likewise.
* testsuite/ld-i386/plt-pie-ibt.dd: Likewise.
* testsuite/ld-i386/property-x86-empty.s: Likewise.
* testsuite/ld-i386/property-x86-ibt.s: Likewise.
* testsuite/ld-i386/property-x86-ibt1a.d: Likewise.
* testsuite/ld-i386/property-x86-ibt1b.d: Likewise.
* testsuite/ld-i386/property-x86-ibt2.d: Likewise.
* testsuite/ld-i386/property-x86-ibt3a.d: Likewise.
* testsuite/ld-i386/property-x86-ibt3b.d: Likewise.
* testsuite/ld-i386/property-x86-ibt4.d: Likewise.
* testsuite/ld-i386/property-x86-ibt5.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-2.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2b-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2b.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3b-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3b.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d.d: Likewise.
* testsuite/ld-x86-64/plt-main-ibt-now.rd: Likewise.
* testsuite/ld-x86-64/plt-main-ibt-x32.dd: Likewise.
* testsuite/ld-x86-64/plt-main-ibt.dd: Likewise.
* testsuite/ld-x86-64/property-x86-empty.s: Likewise.
* testsuite/ld-x86-64/property-x86-ibt.s: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt2.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt4.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt5.d: Likewise.
* emulparams/elf32_x86_64.sh: Source emulparams/cet.sh.
(TINY_READONLY_SECTION): Add .plt.sec.
* emulparams/elf_i386.sh: Likewise.
* emulparams/elf_x86_64.sh: Source emulparams/cet.sh.
* ld.texinfo: Document -z ibtplt and -z ibt.
* testsuite/ld-i386/i386.exp: Run IBT and IBT PLT tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-x86-64/pr21481b.S (check): Updated for x32.
Currently, linker will define __start_SECNAME and __stop_SECNAME symbols
only for orphaned sections.
However, during garbage collection, ELF linker marks all sections with
references to __start_SECNAME and __stop_SECNAME symbols as used even
when section SECNAME isn't an orphaned section and linker won't define
__start_SECNAME nor __stop_SECNAME. And ELF linker stores the first
input section whose name matches __start_SECNAME or __stop_SECNAME in
u.undef.section for garbage collection. If these symbols are provided
in linker script, u.undef.section is set to the section where they will
defined by linker script, which leads to the incorrect output.
This patch changes linker to always define referenced __start_SECNAME and
__stop_SECNAME if the input section name is the same as the output section
name, which is always true for orphaned sections, and SECNAME is a C
identifier. Also __start_SECNAME and __stop_SECNAME symbols are marked
as hidden by ELF linker so that __start_SECNAME and __stop_SECNAME symbols
for section SECNAME in different modules are unique. For garbage
collection, ELF linker stores the first matched input section in the
unused vtable field.
bfd/
PR ld/20022
PR ld/21557
PR ld/21562
PR ld/21571
* elf-bfd.h (elf_link_hash_entry): Add start_stop. Change the
vtable field to a union.
(_bfd_elf_is_start_stop): Removed.
* elf32-i386.c (elf_i386_convert_load_reloc): Also check for
__start_SECNAME and __stop_SECNAME symbols.
* elf64-x86-64.c (elf_x86_64_convert_load_reloc): Likewise.
* elflink.c (_bfd_elf_is_start_stop): Removed.
(_bfd_elf_gc_mark_rsec): Check start_stop instead of calling
_bfd_elf_is_start_stop.
(elf_gc_propagate_vtable_entries_used): Skip __start_SECNAME and
__stop_SECNAME symbols. Updated.
(elf_gc_smash_unused_vtentry_relocs): Likewise.
(bfd_elf_gc_record_vtinherit): Likewise.
(bfd_elf_gc_record_vtentry): Likewise.
ld/
PR ld/20022
PR ld/21557
PR ld/21562
PR ld/21571
* ld.texinfo: Update __start_SECNAME/__stop_SECNAME symbols.
* ldlang.c (lang_insert_orphan): Move handling of __start_SECNAME
and __stop_SECNAME symbols to ...
(lang_set_startof): Here. Also define __start_SECNAME and
__stop_SECNAME for -Ur.
* emultempl/elf32.em (gld${EMULATION_NAME}_after_open): Mark
referenced __start_SECNAME and __stop_SECNAME symbols as hidden
and set start_stop for garbage collection.
* testsuite/ld-elf/pr21562a.d: New file.
* testsuite/ld-elf/pr21562a.s: Likewise.
* testsuite/ld-elf/pr21562a.t: Likewise.
* testsuite/ld-elf/pr21562b.d: Likewise.
* testsuite/ld-elf/pr21562b.s: Likewise.
* testsuite/ld-elf/pr21562b.t: Likewise.
* testsuite/ld-elf/pr21562c.d: Likewise.
* testsuite/ld-elf/pr21562c.t: Likewise.
* testsuite/ld-elf/pr21562d.d: Likewise.
* testsuite/ld-elf/pr21562d.t: Likewise.
* testsuite/ld-elf/pr21562e.d: Likewise.
* testsuite/ld-elf/pr21562f.d: Likewise.
* testsuite/ld-elf/pr21562g.d: Likewise.
* testsuite/ld-elf/pr21562h.d: Likewise.
* testsuite/ld-elf/pr21562i.d: Likewise.
* testsuite/ld-elf/pr21562j.d: Likewise.
* testsuite/ld-elf/pr21562k.d: Likewise.
* testsuite/ld-elf/pr21562l.d: Likewise.
* testsuite/ld-elf/pr21562m.d: Likewise.
* testsuite/ld-elf/pr21562n.d: Likewise.
* testsuite/ld-gc/pr20022.d: Likewise.
* testsuite/ld-gc/pr20022a.s: Likewise.
* testsuite/ld-gc/pr20022b.s: Likewise.
* testsuite/ld-gc/gc.exp: Run PR ld/20022 tests.
* testsuite/ld-gc/pr19161.d: Also accept local __start_SECNAME
symbol.
* testsuite/ld-gc/start.d: Likewise.
* testsuite/ld-x86-64/lea1a.d: Updated.
* testsuite/ld-x86-64/lea1b.d: Updated.
* testsuite/ld-x86-64/lea1d.d: Updated.
* testsuite/ld-x86-64/lea1e.d: Likewise.
This commit adds a new linker feature: the ability to resolve section
groups as part of a relocatable link.
Currently section groups are automatically resolved when performing a
final link, and are carried through when performing a relocatable link.
By carried through this means that one copy of each section group (from
all the copies that might be found in all the input files) is placed
into the output file. Sections that are part of a section group will
not match input section specifiers within a linker script and are
forcibly kept as separate sections.
There is a slight resemblance between section groups and common
section. Like section groups, common sections are carried through when
performing a relocatable link, and resolved (allocated actual space)
only at final link time.
However, with common sections there is an ability to force the linker to
allocate space for the common sections when performing a relocatable
link, there's currently no such ability for section groups.
This commit adds such a mechanism. This new facility can be accessed in
two ways, first there's a command line switch --force-group-allocation,
second, there's a new linker script command FORCE_GROUP_ALLOCATION. If
one of these is used when performing a relocatable link then the linker
will resolve the section groups as though it were performing a final
link, the section group will be deleted, and the members of the group
will be placed like normal input sections. If there are multiple copies
of the group (from multiple input files) then only one copy of the group
members will be placed, the duplicate copies will be discarded.
Unlike common sections that have the --no-define-common command line
flag, and INHIBIT_COMMON_ALLOCATION linker script command there is no
way to prevent group resolution during a final link, this is because the
ELF gABI specifically prohibits the presence of SHT_GROUP sections in a
fully linked executable. However, the code as written should make
adding such a feature trivial, setting the new resolve_section_groups
flag to false during a final link should work as you'd expect.
bfd/ChangeLog:
* elf.c (_bfd_elf_make_section_from_shdr): Don't initially mark
SEC_GROUP sections as SEC_EXCLUDE.
(bfd_elf_set_group_contents): Replace use of abort with an assert.
(assign_section_numbers): Use resolve_section_groups flag instead
of relocatable link type.
(_bfd_elf_init_private_section_data): Use resolve_section_groups
flag instead of checking the final_link flag for part of the
checks in here. Fix white space as a result.
* elflink.c (elf_link_input_bfd): Use resolve_section_groups flag
instead of relocatable link type.
(bfd_elf_final_link): Likewise.
include/ChangeLog:
* bfdlink.h (struct bfd_link_info): Add new resolve_section_groups
flag.
ld/ChangeLog:
* ld.h (struct args_type): Add force_group_allocation field.
* ldgram.y: Add support for FORCE_GROUP_ALLOCATION.
* ldlex.h: Likewise.
* ldlex.l: Likewise.
* lexsup.c: Likewise.
* ldlang.c (unique_section_p): Check resolve_section_groups flag
not the relaxable link flag.
(lang_add_section): Discard section groups when we're resolving
groups. Clear the SEC_LINK_ONCE flag if we're resolving section
groups.
* ldmain.c (main): Initialise resolve_section_groups flag in
link_info based on command line flags.
* testsuite/ld-elf/group11.d: New file.
* testsuite/ld-elf/group12.d: New file.
* testsuite/ld-elf/group12.ld: New file.
* NEWS: Mention new features.
* ld.texinfo (Options): Document --force-group-allocation.
(Miscellaneous Commands): Document FORCE_GROUP_ALLOCATION.
Since it is incorrect to convert
bnd call *foo@GOTPCREL(%rip)
to
bnd nop
call foo
this patch removes the "-z prefix-nop" option from x86 linker.
* emulparams/call_nop.sh: Remove -z prefix-nop.
* ld.texinfo: Likewise.
* testsuite/ld-i386/call3c.d: Check for linker error.
* testsuite/ld-x86-64/call1c.d: Likewise.
PR ld/21251
* ldfile.c (ldfile_add_library_path): If the path starts with
$SYSROOT then use the sysroot as the real prefix.
* ldlang.c (lang_add_input_file): Treat $SYSROOT in the same
way as =.
* ldlex.l: Add $SYSROOT as allow prefix for a filename.
* ld.texinfo (-L): Document that $SYSROOT acts like = when
prefixing a library search path.
(INPUT): Likewise.
* testsuite/ld-scripts/sysroot-prefix.exp: Add $SYSROOT prefix
tests.
-z nodynamic-undefined-weak is only implemented for x86. (The sparc
backend has some support code but doesn't enable the option by
including ld/emulparams/dynamic_undefined_weak.sh, and since the
support looks like it may be broken I haven't enabled it.) This patch
adds the complementary -z dynamic-undefined-weak, extends both options
to affect building of shared libraries as well as executables, and
adds support for the option on powerpc.
include/
* bfdlink.h (struct bfd_link_info <dynamic_undefined_weak>):
Revise comment.
bfd/
* elflink.c (_bfd_elf_adjust_dynamic_symbol): Hide undefweak
or make dynamic for info->dynamic_undefined_weak 0 and 1.
* elf32-ppc.c:Formatting.
(ensure_undefweak_dynamic): Don't make dynamic when
info->dynamic_undefined_weak is zero.
(allocate_dynrelocs): Discard undefweak dyn_relocs for
info->dynamic_undefined_weak. Discard undef dyn_relocs when
not default visibility. Discard undef and undefweak
dyn_relocs earlier.
(ppc_elf_relocate_section): Adjust to suit.
* elf64-ppc.c: Formatting.
(ensure_undefweak_dynamic): Don't make dynamic when
info->dynamic_undefined_weak is zero.
(allocate_dynrelocs): Discard undefweak dyn_relocs for
info->dynamic_undefined_weak. Discard them earlier.
ld/
* ld.texinfo (dynamic-undefined-weak): Document.
(nodynamic-undefined-weak): Document that this option now can
be used with shared libs.
* emulparams/dynamic_undefined_weak.sh: Support -z
dynamic-undefined-weak.
* emulparams/elf32ppccommon.sh: Include dynamic_undefined_weak.sh.
* testsuite/ld-undefined/weak-undef.exp (undef_weak_so),
(undef_weak_exe): New. Use them. Add -z dynamic-undefined-weak
and -z nodynamic-undefined-weak tests.
* Makefile.am: Update powerpc dependencies.
* Makefile.in: Regenerate.
These targets use the generic ELF support, so don't handle orphans
well. The patch also updates the orphan doco to reflect this fact,
and deletes some ELF details that don't really add anything.
* ld.texinfo (Orphan Sections): Mention that not all targets
handle orphans well. Delete ELF details.
* testsuite/ld-elf/orphan-9.d: Don't run for i860 and i960.
* testsuite/ld-elf/orphan-10.d: Likewise.
Make more explicit mention of the fact that orphan sections can cause a
new output section to be created. Though this information is clearly
implied in the manual it might not be clear enough.
A user _might_ (incorrectly) think that orphan sections can only be
inserted into an existing output section.
ld/ChangeLog:
* ld.texinfo (Orphan Sections): Add more detail.
Complement commit 9d862524f6 ("MIPS: Verify the ISA mode and alignment
of branch and jump targets") and add GAS and LD options to control the
checks for invalid branches between ISA modes introduced there, to help
with some handwritten code lacking `.insn' annotation for labels used as
branch targets and code produced by older versions of GCC which suffers
from the issue with branches to code that has been optimized away,
addressed with GCC commit 242424 ("MIPS/GCC: Mark trailing labels with
`.insn'"), <https://gcc.gnu.org/ml/gcc-patches/2016-11/msg01061.html>.
bfd/
* elfxx-mips.h (_bfd_mips_elf_insn32): Rename prototype to...
(_bfd_mips_elf_linker_flags): ... this. Add another parameter.
* elfxx-mips.c (mips_elf_link_hash_table): Add
`ignore_branch_isa' member.
(mips_elf_perform_relocation): Do not treat an ISA mode mismatch
in branch relocation calculation as an error if
`ignore_branch_isa' has been set.
(_bfd_mips_elf_insn32): Rename to...
(_bfd_mips_elf_linker_flags): ... this. Rename the `on'
parameter to `insn32' and add an `ignore_branch_isa' parameter.
Handle the new parameter.
gas/
* config/tc-mips.c (mips_ignore_branch_isa): New variable.
(options): Add OPTION_IGNORE_BRANCH_ISA and
OPTION_NO_IGNORE_BRANCH_ISA enum values.
(md_longopts): Add "mignore-branch-isa" and
"mno-ignore-branch-isa" options.
(md_parse_option): Handle OPTION_IGNORE_BRANCH_ISA and
OPTION_NO_IGNORE_BRANCH_ISA.
(fix_bad_cross_mode_branch_p): Return FALSE if
`mips_ignore_branch_isa' has been set.
(md_show_usage): Add `-mignore-branch-isa' and
`-mno-ignore-branch-isa'.
* doc/as.texinfo (Target MIPS options): Add
`-mignore-branch-isa' and `-mno-ignore-branch-isa' options.
(-mignore-branch-isa, -mno-ignore-branch-isa): New options.
* doc/c-mips.texi (MIPS Options): Add `-mignore-branch-isa' and
`-mno-ignore-branch-isa' options.
* testsuite/gas/mips/branch-local-ignore-2.d: New test.
* testsuite/gas/mips/branch-local-ignore-3.d: New test.
* testsuite/gas/mips/branch-local-ignore-n32-2.d: New test.
* testsuite/gas/mips/branch-local-ignore-n32-3.d: New test.
* testsuite/gas/mips/branch-local-ignore-n64-2.d: New test.
* testsuite/gas/mips/branch-local-ignore-n64-3.d: New test.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* emultempl/mipself.em (ignore_branch_isa): New variable.
(mips_create_output_section_statements): Rename
`_bfd_mips_elf_insn32' called to `_bfd_mips_elf_linker_flags',
add `ignore_branch_isa' argument.
(PARSE_AND_LIST_PROLOGUE): Add OPTION_IGNORE_BRANCH_ISA and
OPTION_NO_IGNORE_BRANCH_ISA enum values.
(PARSE_AND_LIST_LONGOPTS): Add "ignore-branch-isa" and
"no-ignore-branch-isa" options.
(PARSE_AND_LIST_OPTIONS): Add `--ignore-branch-isa' and
`--no-ignore-branch-isa'.
(PARSE_AND_LIST_ARGS_CASES): Handle OPTION_IGNORE_BRANCH_ISA and
OPTION_NO_IGNORE_BRANCH_ISA.
* ld.texinfo (Options specific to MIPS targets): Add
`--ignore-branch-isa' and `--no-ignore-branch-isa' options.
(ld and the MIPS family): Likewise.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore-n32.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore-n64.d: New test.
* testsuite/ld-mips-elf/unaligned-branch-ignore-2.d: New test.
* testsuite/ld-mips-elf/unaligned-branch-ignore-r6-1: New test.
* testsuite/ld-mips-elf/unaligned-branch-ignore-mips16: New
test.
* testsuite/ld-mips-elf/unaligned-branch-ignore-micromips: New
test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
PR 20343
ld * ld.texinfo (Options): Extend documentation of the --plugin
option. Include a description of where the plugins should be
located.
binutils* doc/binutils.texi (ar): Extend documentation of the --plugin
option. Include a description of where the plugins should be
located.
(nm): Likewise.
PR ld/20815
bfd * elf.c (elf_modify_segment_map): Allow empty LOAD segments if
they contain the program headers.
(_bfd_elf_map_sections_to_segments): If the linker created the
PHDR segment then always attempt to include it in a LOAD segment.
(assign_file_positions_for_non_load_sections): Allow LOAD segments
to overlap PHDR segments.
(phdr_sorter): New function. Sorts program headers.
(assign_file_positions_except_relocs): Sort the program headers
before writing them out. Issue an error if the PHDR segment is
not covered by a LOAD segment, unless the backend allows it.
* elf-bfd.h (struct elf_backend_data): Add
elf_backend_allow_non_load_phdr.
* elfxx-target.h (elf_backend_allow_non_load_phdr): Provide
default definition that returns FALSE.
(elfNN_bed): Initialise the elf_backend_allow_non_load_phdr
field.
* elf64-hppa.c (elf64_hppa_allow_non_load_phdr): New function.
Returns TRUE.
(elf_backend_allow_non_load_phdr): Define.
* elf-m10300.c (_bfd_mn10300_elf_size_dynamic_sections): Do not
place the interpreter string into the .interp section if the
nointerp flag is set in the link info structure.
* elf32-arc.c (elf_arc_size_dynamic_sections): Likewise.
* elf32-score7.c (score_elf_final_link_relocate): Allow for the
_gp symbol not being part of the output.
binutils* readelf.c (process_program_headers): Check PT_LOAD and PT_PHDR
segments for validity.
ld * ld.texinfo: Note that PT_TLS can be used as a segment type.
* testsuite/ld-discard/discard.ld: Add space for program headers.
* testsuite/ld-elf/flags1.ld: Likewise.
* testsuite/ld-elf/maxpage3.t: Likewise.
* testsuite/ld-elf/noload-1.t: Likewise.
* testsuite/ld-elf/orphan.ld: Likewise.
* testsuite/ld-elf/overlay.t: Likewise.
* testsuite/ld-elf/pr14052.t: Likewise.
* testsuite/ld-elf/pr19539.t: Likewise.
* testsuite/ld-elf/provide-hidden-1.ld: Likewise.
* testsuite/ld-elf/provide-hidden-s.ld: Likewise.
* testsuite/ld-elf/weak-dyn-1.ld: Likewise.
* testsuite/ld-i386/pr19539.t: Likewise.
* testsuite/ld-scripts/defined.t: Likewise.
* testsuite/ld-scripts/defined6.t: Likewise.
* testsuite/ld-scripts/dynamic-sections.t: Likewise.
* testsuite/ld-scripts/empty-aligned.t: Likewise.
* testsuite/ld-scripts/provide-2.t: Likewise.
* testsuite/ld-scripts/provide-4.t: Likewise.
* testsuite/ld-vax-elf/plt-local.ld: Likewise.
* testsuite/ld-x86-64/pr19539.t: Likewise.
* testsuite/ld-elf/ehdr_start-missing.d: Do not initialise the
dynamic linker.
* testsuite/ld-elf/ehdr_start-weak.d: Likewise.
* testsuite/ld-elf/elf.exp (pr14170, pr17068): Likewise.
* testsuite/ld-elf/loadaddr1.d: Update expected readelf output.
* testsuite/ld-elf/noload-2.d: Likewise.
* testsuite/ld-powerpc/vxworks2.sd: Likewise.
* testsuite/ld-scripts/phdrs3a.d: Likewise.
* testsuite/ld-scripts/size-2.d: Likewise.
* testsuite/ld-elf/group.ld: Add program headers.
* testsuite/ld-elf/overlay.d: Skip for SPU.
* testsuite/ld-elf/flags1.d: Skip for RX.
* testsuite/ld-elf/pr19162.d: Skip for HPPA64.
* testsuite/ld-elf/pr19539.d: Skip for ALPHA.
* testsuite/ld-scripts/empty-orphan.t: Update program headers.
* testsuite/ld-scripts/size-2.t: Likewise.
PR ld/20784
* emultempl/elf32.em (search_needed): Fix infinite loop when
unable to process a token. Add support for curly braced enclosed
tokens.
* ld.texinfo (--rpath-link): Document supprot for $ORIGIN and
$LIB.
Currently the EXCLUDE_FILE linker script construct can only be used
within the input section list, and applied only to the section pattern
immediately following the EXCLUDE_FILE. For example:
*.o (EXCLUDE_FILE (a.o) .text .rodata)
In this case all sections matching '.text' are included from all files
matching '*.o' but not from the file 'a.o'. All sections matching
'.rodata' are also included from all files matching '*.o' (incluing from
'a.o').
If the user wants to restrict the inclusion of section '.rodata' so that
this too is not taken from the file 'a.o' then the above example must be
extended like this:
*.o (EXCLUDE_FILE (a.o) .text EXCLUDE_FILE (a.o) .rodata)
However, due to the internal grammar of the linker script language the
snippet 'EXCLUDE_FILE (a.o) .text' is parsed by a pattern called
'wildcard_spec'. The same 'wildcard_spec' pattern is also used to parse
the input file name snippet '*.o' in the above examples. As a result of
this pattern reuse within the linker script grammar then the following
is also a valid linker script construct:
EXCLUDE_FILE (a.o) *.o (.text .rodata)
However, though the linker accepts this without complaint the
EXCLUDE_FILE part is silently ignored and has no effect.
This commit takes this last example and makes it a useful, valid,
construct. The last example now means to include sections '.text' and
'.rodata' from all files matching '*.o' except for the file 'a.o'.
If the list of input sections is long, and the user knows that the file
exclusion applies across the list then the second form might be a
clearer alternative to replicating the EXCLUDE_FILE construct.
I've added a set of tests for EXCLUDE_FILE to the linker, including
tests for the new functionality.
ld/ChangeLog:
* ldlang.h (struct lang_wild_statement_struct): Add
exclude_name_list field.
* ldlang.c (walk_wild_file_in_exclude_list): New function.
(walk_wild_consider_section): Use new
walk_wild_file_in_exclude_list function.
(walk_wild_file): Add call to walk_wild_file_in_exclude_list.
(print_wild_statement): Print new exclude_name_list field.
(lang_add_wild): Initialise new exclude_name_list field.
* testsuite/ld-scripts/exclude-file-1.d: New file.
* testsuite/ld-scripts/exclude-file-1.map: New file.
* testsuite/ld-scripts/exclude-file-1.t: New file.
* testsuite/ld-scripts/exclude-file-2.d: New file.
* testsuite/ld-scripts/exclude-file-2.map: New file.
* testsuite/ld-scripts/exclude-file-2.t: New file.
* testsuite/ld-scripts/exclude-file-3.d: New file.
* testsuite/ld-scripts/exclude-file-3.map: New file.
* testsuite/ld-scripts/exclude-file-3.t: New file.
* testsuite/ld-scripts/exclude-file-4.d: New file.
* testsuite/ld-scripts/exclude-file-4.map: New file.
* testsuite/ld-scripts/exclude-file-4.t: New file.
* testsuite/ld-scripts/exclude-file-a.s: New file.
* testsuite/ld-scripts/exclude-file-b.s: New file.
* testsuite/ld-scripts/exclude-file.exp: New file.
* ld.texinfo (Input Section Basics): Update description of
EXCLUDE_FILE to cover the new features.
* NEWS: Mention new EXCLUDE_FILE usage.
Changes the result of ld expressions that were previously plain
numbers to be an absolute address, in the same circumstances where
numbers are treated as absolute addresses.
* ld.texinfo (Expression Section): Update result of arithmetic
expressions.
* ldexp.c (arith_result_section): New function.
(fold_binary): Use it.
There was a gap in the documentation of EXCLUDE_FILE that could cause
confusion to a user. When writing an input section specifier like this:
*(EXCLUDE_FILE (somefile.o) .text .text.*)
this could mean one of the following:
1. All '.text' and '.text.*' from all files except for 'somefile.o',
or
2. All '.text' from all files except 'somefile.o', and all '.text.*'
sections from all files.
It turns out that the second interpretation is correct, but the manual
does not make this clear (to me at least). Hopefully this patch makes
things clearer.
ld/ChangeLog:
* ld/ld.texinfo (Input Section Basics): Expand the description of
EXCLUDE_FILE.
PR ld/20537
* emultempl/elf32.em: More OPTION_xxx values into an enum. Add
OPTION_NO_EH_FRAME_HDR.
(_add_options): Add support for --no-eh-frame-hdr.
* ld.texinfo: Document new option.
* lexsup.c (elf_shlib_list_options): List new option.
* NEWS: Mention the new option.
2016-08-26 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
* bfd-in.h (bfd_elf32_arm_set_target_relocs): Add a new parameter for
the input import library bfd.
* bfd-in2.h: Regenerate.
* elf32-arm.c (struct elf32_arm_link_hash_table): New in_implib_bfd
and new_cmse_stub_offset fields.
(stub_hash_newfunc): Initialize stub_offset and stub_template_size to
-1.
(elf32_arm_add_stub): Likewise for stub_offset.
(arm_new_stubs_start_offset_ptr): New function.
(arm_build_one_stub): Only allocate a stub_offset if it is -1. Allow
empty SG veneers to have zero relocations.
(arm_size_one_stub): Only initialize stub size and template
information for non empty veneers. Do not update veneer section size
if veneer already has an offset.
(elf32_arm_create_stub): Return the stub entry pointer or NULL instead
of a boolean indicating success or failure.
(cmse_scan): Change stub_changed parameter into an integer pointer
parameter cmse_stub_created to count the number of stub created and
adapt to change of return value in elf32_arm_create_stub.
(cmse_entry_fct_p): New function.
(arm_list_new_cmse_stub): Likewise.
(set_cmse_veneer_addr_from_implib): Likewise.
(elf32_arm_size_stubs): Define cmse_stub_created, pass its address to
cmse_scan instead of that of cmse_stub_changed to compute the number
of stub created and use it to initialize stub_changed. Call
set_cmse_veneer_addr_from_implib after all cmse_scan. Adapt to change
of return value in elf32_arm_create_stub. Use
arm_stub_section_start_offset () if not NULL to initialize size of
secure gateway veneers section. Initialize stub_offset of Cortex-A8
erratum fix to -1. Use ret to hold return value.
(elf32_arm_build_stubs): Use arm_stub_section_start_offset () if not
NULL to initialize size of secure gateway veneers section. Adapt
comment to stress the importance of zeroing veneer section content.
(bfd_elf32_arm_set_target_relocs): Add new in_implib_bfd parameter to
initialize eponymous field in struct elf32_arm_link_hash_table.
ld/
* emultempl/armelf.em (in_implib_filename): Declare and initialize new
variable.
(arm_elf_create_output_section_statements): Open import input library
file for writing and pass resulting in_implib_bfd to
bfd_elf32_arm_set_target_relocs.
(PARSE_AND_LIST_PROLOGUE): Define OPTION_IN_IMPLIB option.
(PARSE_AND_LIST_LONGOPTS): Define --in-implib option.
(PARSE_AND_LIST_OPTIONS): Add help message for --in-implib option.
(PARSE_AND_LIST_ARGS_CASES): Handle new OPTION_IN_IMPLIB case.
* ld.texinfo (--cmse-implib): Update to mention --in-implib.
(--in-implib): Document new option.
* NEWS: Likewise.
* testsuite/ld-arm/arm-elf.exp
(Secure gateway import library generation): add --defsym VER=1 to gas
CLI.
(Secure gateway import library generation: errors): Likewise.
(Input secure gateway import library): New test.
(Input secure gateway import library: no output import library):
Likewise.
(Input secure gateway import library: not an SG input import library):
Likewise.
(Input secure gateway import library: earlier stub section base):
Likewise.
(Input secure gateway import library: later stub section base):
Likewise.
(Input secure gateway import library: veneer comeback): Likewise.
(Input secure gateway import library: entry function change):
Likewise.
* testsuite/ld-arm/cmse-implib.s: Add input import library testing.
* testsuite/ld-arm/cmse-implib.rd: Update accordingly.
* testsuite/ld-arm/cmse-new-implib.out: New file.
* testsuite/ld-arm/cmse-new-implib.rd: Likewise.
* testsuite/ld-arm/cmse-new-implib-no-output.out: Likewise.
* testsuite/ld-arm/cmse-new-implib-not-sg-in-implib.out: Likewise.
* testsuite/ld-arm/cmse-new-earlier-later-implib.out: Likewise.
* testsuite/ld-arm/cmse-new-comeback-implib.rd: Likewise.
* testsuite/ld-arm/cmse-new-wrong-implib.out: Likewise.
bfd/
* elf32-arm.c (CMSE_PREFIX): Define macro.
(elf32_arm_stub_cmse_branch_thumb_only): Define stub sequence.
(cmse_branch_thumb_only): Declare stub.
(struct elf32_arm_link_hash_table): Define cmse_stub_sec field.
(elf32_arm_get_plt_info): Add globals parameter. Use it to return
FALSE if there is no PLT.
(arm_type_of_stub): Adapt to new elf32_arm_get_plt_info signature.
(elf32_arm_final_link_relocate): Likewise.
(elf32_arm_gc_sweep_hook): Likewise.
(elf32_arm_gc_mark_extra_sections): Mark sections holding ARMv8-M
secure entry functions.
(arm_stub_is_thumb): Add case for arm_stub_cmse_branch_thumb_only.
(arm_dedicated_stub_output_section_required): Change to a switch case
and add a case for arm_stub_cmse_branch_thumb_only.
(arm_dedicated_stub_output_section_required_alignment): Likewise.
(arm_stub_dedicated_output_section_name): Likewise.
(arm_stub_dedicated_input_section_ptr): Likewise and remove
ATTRIBUTE_UNUSED for htab parameter.
(arm_stub_required_alignment): Likewise.
(arm_stub_sym_claimed): Likewise.
(arm_dedicated_stub_section_padding): Likewise.
(cmse_scan): New function.
(elf32_arm_size_stubs): Call cmse_scan for ARM M profile targets.
Set stub_changed to TRUE if such veneers were created.
(elf32_arm_swap_symbol_in): Add detection code for CMSE special
symbols.
include/
* arm.h (ARM_GET_SYM_CMSE_SPCL): Define macro.
(ARM_SET_SYM_CMSE_SPCL): Likewise.
ld/
* ld.texinfo (Placement of SG veneers): New concept entry.
* testsuite/ld-arm/arm-elf.exp
(Secure gateway veneers: no .gnu.sgstubs section): New test.
(Secure gateway veneers: wrong entry functions): Likewise.
(Secure gateway veneers (ARMv8-M Baseline)): Likewise.
(Secure gateway veneers (ARMv8-M Mainline)): Likewise.
* testsuite/ld-arm/cmse-veneers.s: New file.
* testsuite/ld-arm/cmse-veneers.d: Likewise.
* testsuite/ld-arm/cmse-veneers.rd: Likewise.
* testsuite/ld-arm/cmse-veneers.sd: Likewise.
* testsuite/ld-arm/cmse-veneers-no-gnu_sgstubs.out: Likewise.
* testsuite/ld-arm/cmse-veneers-wrong-entryfct.out: Likewise.
When handling absolute relocations for global symbols bind within the
shared object, AArch64 will generate one dynamic RELATIVE relocation,
but won't apply the value for this absolution relocations at static
linking stage. This is different from AArch64 gold linker and x86-64.
This is not a bug as AArch64 is RELA, there is only guarantee that
relocation addend is placed in the relocation entry. But some
system softwares originally writen for x86-64 might assume AArch64
bfd linker gets the same behavior as x86-64, then they could take
advantage of this buy skipping those RELATIVE dynamic relocations
if the load address is the same as the static linking address.
This patch makes AArch64 BFD linker applies absolution relocations at
static linking stage for scenario described above. Meanwhile old AArch64
android loader has a bug (PR19163) which relies on current linker behavior
as a workaround, so the same option --no-apply-dynamic-relocs added.
NOCROSSREFS_TO is similar to the existing NOCROSSREFS command but only
checks one direction of cross referencing.
ld/ChangeLog
* ld.texinfo: Document NOCROSSREFS_TO script command.
* ldlang.h (struct lang_nocrossrefs): Add onlyfirst field.
(lang_add_nocrossref_to): New prototype.
* ldcref.c (check_local_sym_xref): Use onlyfirst to only look for
symbols defined in the first section.
(check_nocrossref): Likewise.
* ldgram.y (NOCROSSREFS_TO): New script command.
* ldlang.c (lang_add_nocrossref): Set onlyfirst to FALSE.
(lang_add_nocrossref_to): New function.
* ldlex.l (NOCROSSREFS_TO): New token.
* NEWS: Mention NOCROSSREFS_TO.
* testsuite/ld-scripts/cross4.t: New file.
* testsuite/ld-scripts/cross5.t: Likewise.
* testsuite/ld-scripts/cross6.t: Likewise.
* testsuite/ld-scripts/cross7.t: Likewise.
* testsuite/ld-scripts/crossref.exp: Run 4 new NOCROSSREFS_TO
tests.
Before binutils 2.26, -Bsymbolic and -Bsymbolic-functions were also
applied to PIE so that "ld -pie -Bsymbolic -E" can be used to export
symbols in PIE with local binding. This patch re-enables -Bsymbolic
and -Bsymbolic-functions for PIE.
PR ld/19615
* ld.texinfo: Document -Bsymbolic and -Bsymbolic-functions for
PIE.
* lexsup.c (parse_args): Enable -Bsymbolic and
-Bsymbolic-functions for PIE.
* testsuite/ld-i386/i386.exp: Run pr19175.
* testsuite/ld-i386/pr19615.d: New file.
* testsuite/ld-i386/pr19615.s: Likewise.
* testsuite/ld-x86-64/pr19615.d: Likewise.
* testsuite/ld-x86-64/pr19615.s: Likewise.
bfd * bfd-in2.h: Regenerate.
* bfd-in.h (bfd_arm_stm32l4xx_fix): New enum. Specify how
STM32L4XX instruction scanning should be done.
(bfd_elf32_arm_set_stm32l4xx_fix)
(bfd_elf32_arm_stm32l4xx_erratum_scan)
(bfd_elf32_arm_stm32l4xx_fix_veneer_locations): Add prototypes.
(bfd_elf32_arm_set_target_relocs): Add stm32l4xx fix type argument
to prototype.
* elf32-arm.c (STM32L4XX_ERRATUM_VENEER_SECTION_NAME)
(STM32L4XX_ERRATUM_VENEER_ENTRY_NAME): Define macros.
(elf32_stm32l4xx_erratum_type): New enum.
(elf32_stm32l4xx_erratum_list): New struct. List of veneers or
jumps to veneers.
(_arm_elf_section_data): Add stm32l4xx_erratumcount,
stm32l4xx_erratumlist.
(elf32_arm_link_hash_table): Add stm32l4xx_erratum_glue_size,
stm32l4xx_fix and num_stm32l4xx_fixes fields.
(ctz): New function.
(popcount): New function.
(elf32_arm_link_hash_table_create): Initialize stm32l4xx_fix.
(put_thumb2_insn): New function.
(STM32L4XX_ERRATUM_LDM_VENEER_SIZE): Define. Size of a veneer for
LDM instructions.
(STM32L4XX_ERRATUM_VLDM_VENEER_SIZE): Define. Size of a veneer for
VLDM instructions.
(bfd_elf32_arm_allocate_interworking_sections): Initialise erratum
glue section.
(record_stm32l4xx_erratum_veneer) : New function. Create a single
veneer, and its associated symbols.
(bfd_elf32_arm_add_glue_sections_to_bfd): Add STM32L4XX erratum glue.
(bfd_elf32_arm_set_stm32l4xx_fix): New function. Set the type of
erratum workaround required.
(bfd_elf32_arm_stm32l4xx_fix_veneer_locations): New function. Find
out where veneers and branches to veneers have been placed in
virtual memory after layout.
(is_thumb2_ldmia): New function.
(is_thumb2_ldmdb): Likewise.
(is_thumb2_vldm ): Likewise.
(stm32l4xx_need_create_replacing_stub): New function. Decide if a
veneer must be emitted.
(bfd_elf32_arm_stm32l4xx_erratum_scan): Scan the sections of an
input BFD for potential erratum-triggering insns. Record results.
(bfd_elf32_arm_set_target_relocs): Set stm32l4xx_fix field in
global hash table.
(elf32_arm_size_dynamic_sections): Collect glue information.
(create_instruction_branch_absolute): New function.
(create_instruction_ldmia): Likewise.
(create_instruction_ldmdb): Likewise.
(create_instruction_mov): Likewise.
(create_instruction_sub): Likewise.
(create_instruction_vldmia): Likewise.
(create_instruction_vldmdb): Likewise.
(create_instruction_udf_w): Likewise.
(create_instruction_udf): Likewise.
(push_thumb2_insn32): Likewise.
(push_thumb2_insn16): Likewise.
(stm32l4xx_fill_stub_udf): Likewise.
(stm32l4xx_create_replacing_stub_ldmia): New function. Expands the
replacing stub for ldmia instructions.
(stm32l4xx_create_replacing_stub_ldmdb): Likewise for ldmdb.
(stm32l4xx_create_replacing_stub_vldm): Likewise for vldm.
(stm32l4xx_create_replacing_stub): New function. Dispatches the
stub emission to the appropriate functions.
(elf32_arm_write_section): Output veneers, and branches to veneers.
ld * ld.texinfo: Description of the STM32L4xx erratum workaround.
* emultempl/armelf.em (stm32l4xx_fix): New.
(arm_elf_before_allocation): Choose the type of fix, scan for
erratum.
(gld${EMULATION_NAME}_finish): Fix veneer locations.
(arm_elf_create_output_section_statements): Propagate
stm32l4xx_fix value.
(PARSE_AND_LIST_PROLOGUE): Define OPTION_STM32L4XX_FIX.
(PARSE_AND_LIST_LONGOPTS): Add entry for handling
--fix-stm32l4xx-629360.
(PARSE_AND_LIST_OPTION): Add entry for helping on
--fix-stm32l4xx-629360.
(PARSE_AND_LIST_ARGS_CASES): Treat OPTION_STM32L4XX_FIX.
tests * ld-arm/arm-elf.exp (armelftests_common): Add STM32L4XX
tests.
* ld-arm/stm32l4xx-cannot-fix-far-ldm.d: New.
* ld-arm/stm32l4xx-cannot-fix-far-ldm.s: Likewise.
* ld-arm/stm32l4xx-cannot-fix-it-block.d: Likewise.
* ld-arm/stm32l4xx-cannot-fix-it-block.s: Likewise.
* ld-arm/stm32l4xx-fix-all.d: Likewise.
* ld-arm/stm32l4xx-fix-all.s: Likewise.
* ld-arm/stm32l4xx-fix-it-block.d: Likewise.
* ld-arm/stm32l4xx-fix-it-block.s: Likewise.
* ld-arm/stm32l4xx-fix-ldm.d: Likewise.
* ld-arm/stm32l4xx-fix-ldm.s: Likewise.
* ld-arm/stm32l4xx-fix-vldm.d: Likewise.
* ld-arm/stm32l4xx-fix-vldm.s: Likewise.
PR gas/19109
. * configure.ac: Note the 'none' is an acceptable argument to
--enable-compressed-debug-sections.
* configure: Regenerate.
gas * configure.ac: Restore --enable-compressed-debug-sections.
Do not enable compressed debug sections by default for x86 Linux
targets.
* configure: Regenerate.
ld * configure.ac: Add --enable-compressed-debug-sections.
* configure: Regenerate.
* config.in: Regenerate.
* ld.texinfo: Document how to determine the default action for
debug sections.
* ldmain.c (main): If DEFAULT_FLAG_COMPRESS_DEBUG is defined then
set the compress_debug field of the link_info structure to
zlib-gabi.
* lexsup.c (elf_static_list_options): Output the default setting
for the --compress-debug-sections option.
* NEWS: Mention the new configure option.