The following patch will make "info threads" call target_extra_thread_info
more frequently. When I looked at the remote implementation, I noticed
that if we're not using qXfer:threads:read, then we'd be increasing the
remote protocol traffic. This commit prevents that from happening.
Also, it removes a gratuitous local static buffer, which seems good on
its own.
gdb/ChangeLog:
2018-06-29 Pedro Alves <palves@redhat.com>
* remote.c (remote_target::extra_thread_info): Delete
'display_buf' and 'n' locals. from the cache, regardless of
packet mechanims is in use. Use cache for qThreadExtra and qP
methods too.
In my multi-target work, I need to add a few more
scoped_restore_current_thread and switch_to_thread calls in some
places, and in some lower-level places I was fighting against the fact
that switch_to_thread reads/refreshes the stop_pc global.
Instead of piling on workarounds, let's just finally eliminate the
stop_pc global. We already have the per-thread
thread_info->suspend.stop_pc field, so it's mainly a matter of using
that more/instead.
gdb/ChangeLog:
2018-06-28 Pedro Alves <palves@redhat.com>
* gdbthread.h (struct thread_suspend_state) <stop_pc>: Extend
comments.
(switch_to_thread_no_regs): Adjust comment.
* infcmd.c (stop_pc): Delete.
(post_create_inferior, info_program_command): Replace references
to stop_pc with references to thread_info->suspend.stop_pc.
* inferior.h (stop_pc): Delete declaration.
* infrun.c (proceed, handle_syscall_event, fill_in_stop_func)
(handle_inferior_event_1, handle_signal_stop)
(process_event_stop_test, keep_going_stepped_thread)
(handle_step_into_function, handle_step_into_function_backward)
(print_stop_location): Replace references to stop_pc with
references to thread_info->suspend.stop_pc.
(struct infcall_suspend_state) <stop_pc>: Delete field.
(save_infcall_suspend_state, restore_infcall_suspend_state):
Remove references to inf_stat->stop_pc.
* linux-fork.c (fork_load_infrun_state): Likewise.
* record-btrace.c (record_btrace_set_replay): Likewise.
* record-full.c (record_full_goto_entry): Likewise.
* remote.c (print_one_stopped_thread): Likewise.
* target.c (target_resume): Extend comment.
* thread.c (set_executing_thread): New.
(set_executing): Use it.
(switch_to_thread_no_regs, switch_to_no_thread, switch_to_thread):
Remove references to stop_pc.
This is more preparation bits for multi-target support.
In a multi-target scenario, we need to address the case of different
processes/threads running on different targets that happen to have the
same PID/PTID. E.g., we can have both process 123 in target 1, and
process 123 in target 2, while they're in reality different processes
running on different machines. Or maybe we've loaded multiple
instances of the same core file. Etc.
To address this, in my WIP multi-target branch, threads and processes
are uniquely identified by the (process_stratum target_ops *, ptid_t)
and (process_stratum target_ops *, pid) tuples respectively. I.e.,
each process_stratum instance has its own thread/process number space.
As you can imagine, that requires passing around target_ops * pointers
in a number of functions where we're currently passing only a ptid_t
or an int. E.g., when we look up a thread_info object by ptid_t in
find_thread_ptid, the ptid_t alone isn't sufficient.
In many cases though, we already have the thread_info or inferior
pointer handy, but we "lose" it somewhere along the call stack, only
to look it up again by ptid_t/pid. Since thread_info or inferior
objects know their parent target, if we pass around thread_info or
inferior pointers when possible, we avoid having to add extra
target_ops parameters to many functions, and also, we eliminate a
number of by ptid_t/int lookups.
So that's what this patch does. In a bit more detail:
- Changes a number of functions and methods to take a thread_info or
inferior pointer instead of a ptid_t or int parameter.
- Changes a number of structure fields from ptid_t/int to inferior or
thread_info pointers.
- Uses the inferior_thread() function whenever possible instead of
inferior_ptid.
- Uses thread_info pointers directly when possible instead of the
is_running/is_stopped etc. routines that require a lookup.
- A number of functions are eliminated along the way, such as:
int valid_gdb_inferior_id (int num);
int pid_to_gdb_inferior_id (int pid);
int gdb_inferior_id_to_pid (int num);
int in_inferior_list (int pid);
- A few structures and places hold a thread_info pointer across
inferior execution, so now they take a strong reference to the
(refcounted) thread_info object to avoid the thread_info pointer
getting stale. This is done in enable_thread_stack_temporaries and
in the infcall.c code.
- Related, there's a spot in infcall.c where using a RAII object to
handle the refcount would be handy, so a gdb::ref_ptr specialization
for thread_info is added (thread_info_ref, in gdbthread.h), along
with a gdb_ref_ptr policy that works for all refcounted_object types
(in common/refcounted-object.h).
gdb/ChangeLog:
2018-06-21 Pedro Alves <palves@redhat.com>
* ada-lang.h (ada_get_task_number): Take a thread_info pointer
instead of a ptid_t. All callers adjusted.
* ada-tasks.c (ada_get_task_number): Likewise. All callers
adjusted.
(print_ada_task_info, display_current_task_id, task_command_1):
Adjust.
* breakpoint.c (watchpoint_in_thread_scope): Adjust to use
inferior_thread.
(breakpoint_kind): Adjust.
(remove_breakpoints_pid): Rename to ...
(remove_breakpoints_inf): ... this. Adjust to take an inferior
pointer. All callers adjusted.
(bpstat_clear_actions): Use inferior_thread.
(get_bpstat_thread): New.
(bpstat_do_actions): Use it.
(bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust
to take a thread_info pointer. All callers adjusted.
(set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint)
(breakpoint_re_set_thread): Use inferior_thread.
* breakpoint.h (struct inferior): Forward declare.
(bpstat_stop_status): Update.
(remove_breakpoints_pid): Delete.
(remove_breakpoints_inf): New.
* bsd-uthread.c (bsd_uthread_target::wait)
(bsd_uthread_target::update_thread_list): Use find_thread_ptid.
* btrace.c (btrace_add_pc, btrace_enable, btrace_fetch)
(maint_btrace_packet_history_cmd)
(maint_btrace_clear_packet_history_cmd): Adjust.
(maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use
inferior_thread.
* cli/cli-interp.c: Include "inferior.h".
* common/refcounted-object.h (struct
refcounted_object_ref_policy): New.
* compile/compile-object-load.c: Include gdbthread.h.
(store_regs): Use inferior_thread.
* corelow.c (core_target::close): Use current_inferior.
(core_target_open): Adjust to use first_thread_of_inferior and use
the current inferior.
* ctf.c (ctf_target::close): Adjust to use current_inferior.
* dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ...
<thread>: ... this new field. All references adjusted.
(dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor):
Take a thread_info pointer instead of a ptid_t.
* dummy-frame.h (dummy_frame_push, dummy_frame_pop)
(dummy_frame_discard, register_dummy_frame_dtor): Take a
thread_info pointer instead of a ptid_t.
* elfread.c: Include "inferior.h".
(elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop):
Use inferior_thread.
* eval.c (evaluate_subexp): Likewise.
* frame.c (frame_pop, has_stack_frames, find_frame_sal): Use
inferior_thread.
* gdb_proc_service.h (struct thread_info): Forward declare.
(struct ps_prochandle) <ptid>: Delete, replaced by ...
<thread>: ... this new field. All references adjusted.
* gdbarch.h, gdbarch.c: Regenerate.
* gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a
'thread' parameter. All implementations and callers adjusted.
* gdbthread.h (thread_info) <set_running>: New method.
(delete_thread, delete_thread_silent): Take a thread_info pointer
instead of a ptid.
(global_thread_id_to_ptid, ptid_to_global_thread_id): Delete.
(first_thread_of_process): Delete, replaced by ...
(first_thread_of_inferior): ... this new function. All callers
adjusted.
(any_live_thread_of_process): Delete, replaced by ...
(any_live_thread_of_inferior): ... this new function. All callers
adjusted.
(switch_to_thread, switch_to_no_thread): Declare.
(is_executing): Delete.
(enable_thread_stack_temporaries): Update comment.
<enable_thread_stack_temporaries>: Take a thread_info pointer
instead of a ptid_t. Incref the thread.
<~enable_thread_stack_temporaries>: Decref the thread.
<m_ptid>: Delete
<m_thr>: New.
(thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
(get_last_thread_stack_temporary)
(value_in_thread_stack_temporaries, can_access_registers_thread):
Take a thread_info pointer instead of a ptid_t. All callers
adjusted.
* infcall.c (get_call_return_value): Use inferior_thread.
(run_inferior_call): Work with thread pointers instead of ptid_t.
(call_function_by_hand_dummy): Work with thread pointers instead
of ptid_t. Use thread_info_ref.
* infcmd.c (proceed_thread_callback): Access thread's state
directly.
(ensure_valid_thread, ensure_not_running): Use inferior_thread,
access thread's state directly.
(continue_command): Use inferior_thread.
(info_program_command): Use find_thread_ptid and access thread
state directly.
(proceed_after_attach_callback): Use thread state directly.
(notice_new_inferior): Take a thread_info pointer instead of a
ptid_t. All callers adjusted.
(exit_inferior): Take an inferior pointer instead of a pid. All
callers adjusted.
(exit_inferior_silent): New.
(detach_inferior): Delete.
(valid_gdb_inferior_id, pid_to_gdb_inferior_id)
(gdb_inferior_id_to_pid, in_inferior_list): Delete.
(detach_inferior_command, kill_inferior_command): Use
find_inferior_id instead of valid_gdb_inferior_id and
gdb_inferior_id_to_pid.
(inferior_command): Use inferior and thread pointers.
* inferior.h (struct thread_info): Forward declare.
(notice_new_inferior): Take a thread_info pointer instead of a
ptid_t. All callers adjusted.
(detach_inferior): Delete declaration.
(exit_inferior, exit_inferior_silent): Take an inferior pointer
instead of a pid. All callers adjusted.
(gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list)
(valid_gdb_inferior_id): Delete.
* infrun.c (follow_fork_inferior, proceed_after_vfork_done)
(handle_vfork_child_exec_or_exit, follow_exec): Adjust.
(struct displaced_step_inferior_state) <pid>: Delete, replaced by
...
<inf>: ... this new field.
<step_ptid>: Delete, replaced by ...
<step_thread>: ... this new field.
(get_displaced_stepping_state): Take an inferior pointer instead
of a pid. All callers adjusted.
(displaced_step_in_progress_any_inferior): Adjust.
(displaced_step_in_progress_thread): Take a thread pointer instead
of a ptid_t. All callers adjusted.
(displaced_step_in_progress, add_displaced_stepping_state): Take
an inferior pointer instead of a pid. All callers adjusted.
(get_displaced_step_closure_by_addr): Adjust.
(remove_displaced_stepping_state): Take an inferior pointer
instead of a pid. All callers adjusted.
(displaced_step_prepare_throw, displaced_step_prepare)
(displaced_step_fixup): Take a thread pointer instead of a ptid_t.
All callers adjusted.
(start_step_over): Adjust.
(infrun_thread_ptid_changed): Remove bit updating ptids in the
displaced step queue.
(do_target_resume): Adjust.
(fetch_inferior_event): Use inferior_thread.
(context_switch, get_inferior_stop_soon): Take an
execution_control_state pointer instead of a ptid_t. All callers
adjusted.
(switch_to_thread_cleanup): Delete.
(stop_all_threads): Use scoped_restore_current_thread.
* inline-frame.c: Include "gdbthread.h".
(inline_state) <inline_state>: Take a thread pointer instead of a
ptid_t. All callers adjusted.
<ptid>: Delete, replaced by ...
<thread>: ... this new field.
(find_inline_frame_state): Take a thread pointer instead of a
ptid_t. All callers adjusted.
(skip_inline_frames, step_into_inline_frame)
(inline_skipped_frames, inline_skipped_symbol): Take a thread
pointer instead of a ptid_t. All callers adjusted.
* inline-frame.h (skip_inline_frames, step_into_inline_frame)
(inline_skipped_frames, inline_skipped_symbol): Likewise.
* linux-fork.c (delete_checkpoint_command): Adjust to use thread
pointers directly.
* linux-nat.c (get_detach_signal): Likewise.
* linux-thread-db.c (thread_from_lwp): New 'stopped' parameter.
(thread_db_notice_clone): Adjust.
(thread_db_find_new_threads_silently)
(thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take
a thread pointer instead of a ptid_t. All callers adjusted.
* mi/mi-cmd-var.c: Include "inferior.h".
(mi_cmd_var_update_iter): Update to use thread pointers.
* mi/mi-interp.c (mi_new_thread): Update to use the thread's
inferior directly.
(mi_output_running_pid, mi_inferior_count): Delete, bits factored
out to ...
(mi_output_running): ... this new function.
(mi_on_resume_1): Adjust to use it.
(mi_user_selected_context_changed): Adjust to use inferior_thread.
* mi/mi-main.c (proceed_thread): Adjust to use thread pointers
directly.
(interrupt_thread_callback): : Adjust to use thread and inferior
pointers.
* proc-service.c: Include "gdbthread.h".
(ps_pglobal_lookup): Adjust to use the thread's inferior directly.
* progspace-and-thread.c: Include "inferior.h".
* progspace.c: Include "inferior.h".
* python/py-exitedevent.c (create_exited_event_object): Adjust to
hold a reference to an inferior_object.
* python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use
inferior_thread.
* python/py-inferior.c (struct inferior_object): Give the type a
tag name instead of a typedef.
(python_on_normal_stop): No need to check if the current thread is
listed.
(inferior_to_inferior_object): Change return type to
inferior_object. All callers adjusted.
(find_thread_object): Delete, bits factored out to ...
(thread_to_thread_object): ... this new function.
* python/py-infthread.c (create_thread_object): Use
inferior_to_inferior_object.
(thpy_is_stopped): Use thread pointer directly.
(gdbpy_selected_thread): Use inferior_thread.
* python/py-record-btrace.c (btpy_list_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(btpy_insn_or_gap_new): Drop const.
(btpy_list_new): Take a thread pointer instead of a ptid_t. All
callers adjusted.
* python/py-record.c: Include "gdbthread.h".
(recpy_insn_new, recpy_func_new): Take a thread pointer instead of
a ptid_t. All callers adjusted.
(gdbpy_current_recording): Use inferior_thread.
* python/py-record.h (recpy_record_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(recpy_element_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(recpy_insn_new, recpy_func_new): Take a thread pointer instead of
a ptid_t. All callers adjusted.
* python/py-threadevent.c: Include "gdbthread.h".
(get_event_thread): Use thread_to_thread_object.
* python/python-internal.h (struct inferior_object): Forward
declare.
(find_thread_object, find_inferior_object): Delete declarations.
(thread_to_thread_object, inferior_to_inferior_object): New
declarations.
* record-btrace.c: Include "inferior.h".
(require_btrace_thread): Use inferior_thread.
(record_btrace_frame_sniffer)
(record_btrace_tailcall_frame_sniffer): Use inferior_thread.
(get_thread_current_frame): Use scoped_restore_current_thread and
switch_to_thread.
(get_thread_current_frame): Use thread pointer directly.
(record_btrace_replay_at_breakpoint): Use thread's inferior
pointer directly.
* record-full.c: Include "inferior.h".
* regcache.c: Include "gdbthread.h".
(get_thread_arch_regcache): Use the inferior's address space
directly.
(get_thread_regcache, registers_changed_thread): New.
* regcache.h (get_thread_regcache(thread_info *thread)): New
overload.
(registers_changed_thread): New.
(remote_target) <remote_detach_1>: Swap order of parameters.
(remote_add_thread): <remote_add_thread>: Return the new thread.
(get_remote_thread_info(ptid_t)): New overload.
(remote_target::remote_notice_new_inferior): Use thread pointers
directly.
(remote_target::process_initial_stop_replies): Use
thread_info::set_running.
(remote_target::remote_detach_1, remote_target::detach)
(extended_remote_target::detach): Adjust.
* stack.c (frame_show_address): Use inferior_thread.
* target-debug.h (target_debug_print_thread_info_pp): New.
* target-delegates.c: Regenerate.
* target.c (default_thread_address_space): Delete.
(memory_xfer_partial_1): Use current_inferior.
(target_detach): Use current_inferior.
(target_thread_address_space): Delete.
(generic_mourn_inferior): Use current_inferior.
* target.h (struct target_ops) <thread_address_space>: Delete.
(target_thread_address_space): Delete.
* thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread
pointers directly.
(delete_thread_1, delete_thread, delete_thread_silent): Take a
thread pointer instead of a ptid_t. Adjust all callers.
(ptid_to_global_thread_id, global_thread_id_to_ptid): Delete.
(first_thread_of_process): Delete, replaced by ...
(first_thread_of_inferior): ... this new function. All callers
adjusted.
(any_thread_of_process): Rename to ...
(any_thread_of_inferior): ... this, and take an inferior pointer.
(any_live_thread_of_process): Rename to ...
(any_live_thread_of_inferior): ... this, and take an inferior
pointer.
(thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
(value_in_thread_stack_temporaries)
(get_last_thread_stack_temporary): Take a thread pointer instead
of a ptid_t. Adjust all callers.
(thread_info::set_running): New.
(validate_registers_access): Use inferior_thread.
(can_access_registers_ptid): Rename to ...
(can_access_registers_thread): ... this, and take a thread
pointer.
(print_thread_info_1): Adjust to compare thread pointers instead
of ptids.
(switch_to_no_thread, switch_to_thread): Make extern.
(scoped_restore_current_thread::~scoped_restore_current_thread):
Use m_thread pointer directly.
(scoped_restore_current_thread::scoped_restore_current_thread):
Use inferior_thread.
(thread_command): Use thread pointer directly.
(thread_num_make_value_helper): Use inferior_thread.
* top.c (execute_command): Use inferior_thread.
* tui/tui-interp.c: Include "inferior.h".
* varobj.c (varobj_create): Use inferior_thread.
(value_of_root_1): Use find_thread_global_id instead of
global_thread_id_to_ptid.
This removes a use of the queue data structure (common/queue.h) from
remote.c.
The queue is replaced with a std::vector. A queue was not needed, as
the code never de-queued items.
This removes quite a bit of boilerplate code, mostly involved with
marshalling arguments to be passed through the queue iterator.
Tested by the buildbot.
gdb/ChangeLog
2018-06-10 Tom Tromey <tom@tromey.com>
* remote.c (stop_reply_p): Remove typedef. Don't declare queue.
(class remote_state) <stop_reply_queue>: Now std::vector.
(remote_state::~remote_state)
(remote_target::stop_reply_queue_length): Update.
(struct queue_iter_param, remove_child_of_pending_fork)
(struct check_pending_event_prevents_wildcard_vcont_callback_data)
(check_pending_event_prevents_wildcard_vcont_callback)
(remove_stop_reply_for_inferior)
(remove_stop_reply_of_remote_state)
(remote_notif_remove_once_on_match)
(stop_reply_match_ptid_and_ws)
(remote_kill_child_of_pending_fork): Remove.
(remote_target::remove_new_fork_children)
(remote_target::check_pending_events_prevent_wildcard_vcont)
(remote_target::discard_pending_stop_replies)
(remote_target::discard_pending_stop_replies_in_queue)
(remote_target::remote_notif_remove_queued_reply)
(remote_target::queued_stop_reply)
(remote_target::push_stop_reply, remote_target::peek_stop_reply)
(remote_target::wait, remote_target::kill_new_fork_children)
(remote_target::async): Update.
This changes target_ops::beneath from a pointer to a method, and
adjusts all references throughout. The idea here is to make it easier
to change the target stack representation from an intrusive singly
linked list to something else without leaking implementation details
throughout.
The commit does not change the representation yet, that will be done
in a following patch. That is why a new target_ops::m_beneath field
appears here. That new field isn't really documented properly or made
private, simply because it will be removed shortly.
Note that target_ops::beneath() is essentially the same as the current
find_target_beneath routine. The following patch will eliminate the
latter.
gdb/ChangeLog:
2018-06-07 Pedro Alves <palves@redhat.com>
* target.h (target_ops) <beneath>: Now a method. All references
updated.
(target_ops) <m_beneath>: New.
* target.c (target_ops::beneath): New.
* corelow.c: Adjust all references to target_ops::beneath.
* linux-thread-db.c: Likewise.
* make-target-delegates: Likewise.
* record-btrace.c: Likewise.
* record-full.c: Likewise.
* remote.c: Likewise.
* target.c: Likewise.
* target-delegates.c: Regenerate.
The recent C++ification of target_ops replaced references to the old
"current_target" squashed target throughout with references to a
"target_stack" pointer. I had picked the "target_stack" name very
early in the multi-target work, and managed to stick with it, even
though it's a bit of a misnomer, since it isn't really a "target
stack" object, but a pointer into the current top target in the stack.
As I'm splitting more pieces off of the multi-target branch, I've come
to think that it's better to rename it now. A following patch will
introduce a new class to represent a target stack, and "target_stack"
would be _its_ ideal name. (In the branch, the class is called
a_target_stack to work around the clash.)
Thus this commit renames target_stack to current_top_target and
replaces all references throughout. Also, while at it,
current_top_target is made a function instead of a pointer, to make it
possible to change its internal implementation without leaking
implementation details out. In a couple patches, the implementation
of the function will change to refer to a target stack object, and
then further down the multi-target work, it'll change again to find
the right target stack for the current inferior.
gdb/ChangeLog:
2018-06-07 Pedro Alves <palves@redhat.com>
* target.h (target_stack): Delete.
(current_top_target): Declare function.
* target.c (target_stack): Delete.
(g_current_top_target): New.
(current_top_target): New function.
* auxv.c: Use current_top_target instead of target_stack
throughout.
* avr-tdep.c: Likewise.
* breakpoint.c: Likewise.
* corefile.c: Likewise.
* elfread.c: Likewise.
* eval.c: Likewise.
* exceptions.c: Likewise.
* frame.c: Likewise.
* gdbarch-selftests.c: Likewise.
* gnu-v3-abi.c: Likewise.
* ia64-tdep.c: Likewise.
* ia64-vms-tdep.c: Likewise.
* infcall.c: Likewise.
* infcmd.c: Likewise.
* infrun.c: Likewise.
* linespec.c: Likewise.
* linux-tdep.c: Likewise.
* minsyms.c: Likewise.
* ppc-linux-nat.c: Likewise.
* ppc-linux-tdep.c: Likewise.
* procfs.c: Likewise.
* regcache.c: Likewise.
* remote.c: Likewise.
* rs6000-tdep.c: Likewise.
* s390-linux-nat.c: Likewise.
* s390-tdep.c: Likewise.
* solib-aix.c: Likewise.
* solib-darwin.c: Likewise.
* solib-dsbt.c: Likewise.
* solib-spu.c: Likewise.
* solib-svr4.c: Likewise.
* solib-target.c: Likewise.
* sparc-tdep.c: Likewise.
* sparc64-tdep.c: Likewise.
* spu-tdep.c: Likewise.
* symfile.c: Likewise.
* symtab.c: Likewise.
* target-descriptions.c: Likewise.
* target-memory.c: Likewise.
* target.c: Likewise.
* target.h: Likewise.
* tracefile-tfile.c: Likewise.
* tracepoint.c: Likewise.
* valops.c: Likewise.
* valprint.c: Likewise.
* value.c: Likewise.
* windows-tdep.c: Likewise.
* mi/mi-main.c: Likewise.
This changes a couple of spots in remote.c to use gdb::byte_vector,
allowing for some cleanup removal.
ChangeLog
2018-05-25 Tom Tromey <tom@tromey.com>
* remote.c (remote_target::remote_file_get): Use
gdb::byte_vector.
(remote_target::remote_file_put): Likewise.
The only reason remote_target::m_remote_state is a pointer is that
struct remote_state is incomplete when struct remote_target is
defined.
This commit thus moves struct remote_state (and its dependencies)
higher up and makes remote_target::m_remote_state an object instead of
a pointer.
gdb/ChangeLog:
2018-05-25 Pedro Alves <palves@redhat.com>
* remote.c (struct vCont_action_support, MAXTHREADLISTRESULTS)
(struct readahead_cache, struct packet_reg, struct
remote_arch_state, class remote_state): Move higher up in the
file.
(remote_target::m_remote_state): Now an object instead of a pointer.
(remote_target::get_remote_state): Adjust.
'struct remote_state' today contains per-connection state, however
there's only a single global instance of that type. In order to
support multiple connections, we must have one such object per
connection.
Thus this patch eliminates the 'remote_state' global in favor of
having a remote_state instance per remote_target instance.
The get_remote_state free function is eliminated as well, by making it
a remote_target method instead.
The patch then fixes the fallout by making all free functions that
refer to get_remote_state() directly or indirectly be methods of
remote_target too.
Likewise, remote-fileio.c and remote-notif.c routines are
parameterized with a remote_target pointer too, so they can call into
the right remote_target instance.
References to the global 'get_remote_state ()->remote_desc' to tell
whether the remote target is open (!= nullptr) must be replaced with
something else:
- Command implementations use a new get_current_remote_target free
function.
- remote_target::open_1 checks the exception type instead.
Finally, remote_target and extended_remote_target are made
heap-allocated targets. As with the earlier core target patches, it
still won't be possible to have more than one remote_target instance
in practice, but this puts us closer.
gdb/ChangeLog:
2018-05-22 Pedro Alves <palves@redhat.com>
* remote-fileio.c (remote_fileio_reply, remote_fileio_ioerror)
(remote_fileio_badfd, remote_fileio_return_errno)
(remote_fileio_return_success, remote_fileio_func_open)
(remote_fileio_func_open, remote_fileio_func_close)
(remote_fileio_func_read, remote_fileio_func_write)
(remote_fileio_func_lseek, remote_fileio_func_rename)
(remote_fileio_func_unlink, remote_fileio_func_stat)
(remote_fileio_func_fstat, remote_fileio_func_gettimeofday)
(remote_fileio_func_isatty, remote_fileio_func_system): Add
remote_target parameter.
(remote_fio_func_map) <func>: Add remote_target parameter.
(do_remote_fileio_request, remote_fileio_request):
* remote-fileio.h (remote_fileio_request):
* remote-notif.c (remote_notif_ack, remote_notif_parse, ): Add
remote_target parameter.
(remote_notif_process, handle_notification): Adjust to pass down
the remote.
(remote_notif_state_allocate): Add remote_target parameter. Save
it.
* remote-notif.h (struct remote_target): Forward declare.
(struct notif_client) <parse, ack, can_get_pending_events>: Add
remote_target parameter.
(struct remote_notif_state) <remote>: New field.
(remote_notif_ack, remote_notif_parse): Add remote_target
parameter.
(remote_notif_state_allocate, remote_notif_state_allocate): Add
remote_target parameter.
* remote.c (OPAQUETHREADBYTES, threadref, gdb_ext_thread_info)
(threads_listing_context, rmt_thread_action, protocol_feature)
(packet_reg, stop_reply, stop_reply_p, enum packet_support)
(packet_result, struct threads_listing_context, remote_state):
Move definitions and declarations higher up.
(remote_target) <~remote_target>: Declare.
(remote_download_command_source, remote_file_put, remote_file_get)
(remote_file_delete, remote_hostio_pread, remote_hostio_pwrite)
(remote_hostio_pread_vFile, remote_hostio_send_command)
(remote_hostio_set_filesystem, remote_hostio_open)
(remote_hostio_close, remote_hostio_unlink, remote_state)
(get_remote_state, get_remote_packet_size, get_memory_packet_size)
(get_memory_write_packet_size, get_memory_read_packet_size)
(append_pending_thread_resumptions, remote_detach_1)
(append_resumption, remote_resume_with_vcont)
(add_current_inferior_and_thread, wait_ns, wait_as)
(process_stop_reply, remote_notice_new_inferior)
(process_initial_stop_replies, remote_add_thread)
(btrace_sync_conf, remote_btrace_maybe_reopen)
(remove_new_fork_children, kill_new_fork_children)
(discard_pending_stop_replies, stop_reply_queue_length)
(check_pending_events_prevent_wildcard_vcont)
(discard_pending_stop_replies_in_queue, stop_reply)
(remote_notif_remove_queued_reply, stop_reply *queued_stop_reply)
(peek_stop_reply, remote_parse_stop_reply, remote_stop_ns)
(remote_interrupt_as, remote_interrupt_ns)
(remote_get_noisy_reply, remote_query_attached)
(remote_add_inferior, remote_current_thread, get_current_thread)
(set_thread, set_general_thread, set_continue_thread)
(set_general_process, write_ptid)
(remote_unpack_thread_info_response, remote_get_threadinfo)
(parse_threadlist_response, remote_get_threadlist)
(remote_threadlist_iterator, remote_get_threads_with_ql)
(remote_get_threads_with_qxfer)
(remote_get_threads_with_qthreadinfo, extended_remote_restart)
(get_offsets, remote_check_symbols, remote_supported_packet)
(remote_query_supported, remote_packet_size)
(remote_serial_quit_handler, remote_detach_pid)
(remote_vcont_probe, remote_resume_with_hc)
(send_interrupt_sequence, interrupt_query)
(remote_notif_get_pending_events, fetch_register_using_p)
(send_g_packet, process_g_packet, fetch_registers_using_g)
(store_register_using_P, store_registers_using_G)
(set_remote_traceframe, check_binary_download)
(remote_write_bytes_aux, remote_write_bytes, remote_read_bytes_1)
(remote_xfer_live_readonly_partial, remote_read_bytes)
(remote_send_printf, remote_flash_write, readchar)
(remote_serial_write, putpkt, putpkt_binary, skip_frame)
(read_frame, getpkt, getpkt_or_notif_sane_1, getpkt_sane)
(getpkt_or_notif_sane, remote_vkill, remote_kill_k)
(extended_remote_disable_randomization, extended_remote_run)
(send_environment_packet, extended_remote_environment_support)
(extended_remote_set_inferior_cwd, remote_write_qxfer)
(remote_read_qxfer, push_stop_reply, vcont_r_supported)
(packet_command): Now methods of ...
(remote_target): ... this class.
(m_remote_state) <remote_target>: New field.
(struct remote_state) <stop_reply_queue,
remote_async_inferior_event_token, wait_forever_enabled_p>: New
fields.
(remote_state::remote_state): Allocate stop_reply_queue.
(remote_state): Delete global.
(get_remote_state_raw): Delete.
(remote_target::get_remote_state): Allocate m_remote_state on
demand.
(get_current_remote_target): New.
(remote_ops, extended_remote_ops): Delete.
(wait_forever_enabled_p, remote_async_inferior_event_token):
Delete, moved to struct remote_state.
(remote_target::close): Delete self. Destruction bits split to
...
(remote_target::~remote_target): ... this.
(show_memory_packet_size): Adjust to use
get_current_remote_target.
(struct protocol_feature) <func>: Add remote_target parameter.
All callers adjusted.
(curr_quit_handler_target): New.
(remote_serial_quit_handler): Reimplement.
(remote_target::open_1): Adjust to use get_current_remote_target.
Heap-allocate remote_target/extended_remote_target instances.
(vcont_builder::vcont_builder): Add remote_target parameter, and
save it in m_remote. All callers adjusted.
(vcont_builder::m_remote): New field.
(vcont_builder::restart, vcont_builder::flush)
(vcont_builder::push_action): Use it.
(remote_target::commit_resume): Use it.
(struct queue_iter_param) <remote>: New field.
(remote_target::remove_new_fork_children): Fill in 'remote' field.
(check_pending_event_prevents_wildcard_vcont_callback_data): New.
(check_pending_event_prevents_wildcard_vcont_callback)
(remote_target::check_pending_events_prevent_wildcard_vcont)
(remote_target::discard_pending_stop_replies)
(remote_target::discard_pending_stop_replies_in_queue)
(remote_target::remote_notif_remove_queued_reply): Fill in
'remote' field.
(remote_notif_get_pending_events): New.
(remote_target::readchar, remote_target::remote_serial_write):
Save/restore curr_quit_handler_target.
(putpkt): New.
(kill_new_fork_children): Fill in 'remote' field.
(packet_command): Use get_current_remote_target, defer to
remote_target method of same name.
(scoped_remote_fd::scoped_remote_fd): Add 'remote_target'
parameter, and save it in m_remote. All callers adjusted.
(scoped_remote_fd::release): Use m_remote.
(scoped_remote_fd::m_remote): New field.
(remote_file_put, remote_file_get, remote_file_delete): Use
get_current_remote_target, defer to remote_target method of same
name.
(remote_btrace_reset): Add remote_state paremeter. Update all
callers.
(remote_async_inferior_event_handler). Pass down 'data'.
(remote_new_objfile): Use get_current_remote_target.
(remote_target::vcont_r_supported): New.
(set_range_stepping): Use get_current_remote_target and
remote_target::vcont_r_supported.
(_initialize_remote): Don't allocate 'remote_state' and
'stop_reply_queue' globals.
* remote.h (struct remote_target): Forward declare.
(getpkt, putpkt, remote_notif_get_pending_events): Add
'remote_target' parameter.
gdb/ChangeLog:
2018-05-22 Pedro Alves <palves@redhat.com>
* remote.c (vcont_builder): Now a class. Make all data members
private.
(vcont_builder) <vcont_builder, restart, flush, push_action>:
Declare methods.
(vcont_builder_restart): Rename to ...
(vcont_builder::restart): ... this.
(vcont_builder_flush): Rename to ...
(vcont_builder::flush): ... this.
(vcont_builder_push_action): Rename to ...
(vcont_builder::push_action): ... this.
(remote_target::commit_resume): Adjust.
Currently "show remote memory-write-packet-size" says that the packet
size is limited to whatever is stored in the remote_state global, even
if not connected to a target.
When we get to support multiple instances of remote targets, there
won't be a remote_state global anymore, so that must be replaced by
something else.
Since it doesn't make sense to print the limit of the packet size of a
non-existing connection, this patch makes us say that the limit will
be further reduced when we connect.
The text is taken from the command's online help, which says:
"The actual limit is further reduced dependent on the target."
Note that a value of "0" is special, as per "help set remote
memory-write-packet-size":
~~~
Specify the number of bytes in a packet or 0 (zero) for the
default packet size.
~~~
I've tweaked "show remote memory-write-packet-size" to include
"(default)" in the output in that case, like this:
(gdb) show remote memory-write-packet-size
The memory-write-packet-size is 0 (default). The actual limit will be further reduced dependent on the target.
While working on this, I noticed that an explicit "set remote
write-packet-size 0" does not makes GDB go back to the exact same
state as the default state when GDB starts up:
(gdb) show remote memory-write-packet-size
The memory-write-packet-size is 0. [...]
^^
(gdb) set remote memory-write-packet-size 0
(gdb) show remote memory-write-packet-size
The memory-write-packet-size is 16384. [...]
^^^^^
The "16384" number comes from DEFAULT_MAX_MEMORY_PACKET_SIZE.
This happens because git commit a5c0808e22 ("gdb: remove packet size
limit") at
<https://sourceware.org/ml/gdb-patches/2015-08/msg00743.html>, added
this:
/* So that the query shows the correct value. */
if (size <= 0)
size = DEFAULT_MAX_MEMORY_PACKET_SIZE;
to set_memory_packet_size, but despite what the comment suggests, that
also has the side-effect of recording DEFAULT_MAX_MEMORY_PACKET_SIZE
in config->size.
Finally, DEFAULT_MAX_MEMORY_PACKET_SIZE only makes sense for "set
remote memory-write-packet-size fixed", so I've renamed it
accordingly, to make it a little bit clearer.
gdb/ChangeLog:
2018-05-22 Pedro Alves <palves@redhat.com>
* remote.c (DEFAULT_MAX_MEMORY_PACKET_SIZE): Rename to ...
(DEFAULT_MAX_MEMORY_PACKET_SIZE_FIXED): ... this.
(get_fixed_memory_packet_size): New.
(get_memory_packet_size): Use it.
(set_memory_packet_size): Don't override the config size with
DEFAULT_MAX_MEMORY_PACKET_SIZE.
(show_memory_packet_size): Use get_fixed_memory_packet_size.
Don't refer to get_memory_packet_size if not connected to a remote
target. Show "(default)" if configured size is 0.
gdb/testsuite/ChangeLog:
2018-05-22 Pedro Alves <palves@redhat.com>
* gdb.base/remote.exp: Adjust expected output of "show remote
memory-write-packet-size". Add tests for "set remote
memory-write-packet-size 0" and "set remote
memory-write-packet-size fixed/limit".
This helps because discard_pending_stop_replies will later become a
method of remote_target. Otherwise, when we have multiple instances
of remote_target, we'd have to make discard_pending_stop_replies find
the inferior's target_ops, and upcast it to remote_target (if indeed a
remote) to find the pending stop replies queue to clear.
gdb/ChangeLog:
2018-05-22 Pedro Alves <palves@redhat.com>
* remote.c (remote_target::mourn_inferior): Move
discard_pending_stop_replies call here from ...
(_initialize_remote): ... here.
The set_general_process call in compare_sections_command isn't
actually needed. remote_target::verify_memory and
remote_target::xfer_partial already handle making sure the remote is
pointing at the right process or thread.
Getting this out of the way helps a bit with further elimination of
the remote_state global, because we have to handle the case of a user
invoking the command even if not connect to a remote target.
gdb/ChangeLog:
2018-05-22 Pedro Alves <palves@redhat.com>
* remote.c (compare_section_command): Remove set_general_process
call.
The previous patch made the map store pointers to remote_arch_state
instead of objects directly, simply because struct remote_arch_state
is still incomplete where struct remote_state is declared. This patch
thus moves the remote_arch_state declaration higher up in the file,
and makes the map store remote_arch_state objects directly instead of
pointers to objects.
gdb/ChangeLog:
2018-05-22 Pedro Alves <palves@redhat.com>
* remote.c (struct packet_reg, struct remote_arch_state):
Move higher up in the file.
(remote_state) <m_arch_states>: Store remote_arch_state values
instead of remote_arch_state pointers.
(remote_state::get_remote_arch_state): Adjust.
Currently, we associate gdbarch-related remote protocol state on a
per-gdbarch data object. Things like the size of the g/G packet, and
the max remote packet size. If we'll support being connected to
different remote servers at the same time, then we need to cope with
each having their own packet sizes, even if they are each debugging
programs of the same architecture. I.e., a single instance of
remote_arch_state per arch is not sufficient.
This patch moves the remote_arch_state object to a map of
gdbarch-to-remote_arch_state saved in the remote_state structure.
Usually there will only be one entry in the map, though we may see
more with stubs that support multi-process and/or archs with multiple
ABIs (e.g, one remote_arch_state for 64-bit inferiors and another for
32-bit inferiors).
gdb/ChangeLog:
2018-05-22 Pedro Alves <palves@redhat.com>
* remote.c: Include <unordered_map>.
(remote_state): Now a class.
(remote_state) <get_remote_arch_state>: Declare method.
<get_remote_arch_state>: New field.
(remote_arch_state) <remote_arch_state>: Declare ctor.
<regs>: Now a unique_ptr.
(remote_gdbarch_data_handle): Delete.
(get_remote_arch_state): Delete.
(remote_state::get_remote_arch_state): New.
(get_remote_state): Adjust to call remote_state's
get_remote_arch_state method.
(init_remote_state): Delete, bits factored out to ...
(remote_arch_state::remote_arch_state): ... this new method.
(get_remote_packet_size, get_memory_packet_size)
(process_g_packet, remote_target::fetch_registers)
(remote_target::prepare_to_store, store_registers_using_G)
(remote_target::store_registers, remote_target::get_trace_status):
Adjust to call remote_state's method.
(_initialize_remote): Remove reference to
remote_gdbarch_data_handle.
The idea here is eliminate the get_remote_state calls from within
readahead_cache_invalidate, readahead_cache_invalidate_fd,
remote_hostio_pread_from_cache by making those functions be class
methods instead. Later on we'll have one readahead_cache instance per
remote connection, and this change makes that easier.
gdb/ChangeLog:
2018-05-22 Pedro Alves <palves@redhat.com>
* remote.c (struct readahead_cache) <invalidate, invalidate_fd,
pread>: New method declarations.
(remote_target::open_1): Adjust.
(readahead_cache_invalidate): Rename to ...
(readahead_cache::invalidate): ... this, and adjust to be a class
method.
(readahead_cache_invalidate_fd): Rename to ...
(readahead_cache::invalidate_fd): ... this, and adjust to be a
class method.
(remote_hostio_pwrite): Adjust.
(remote_hostio_pread_from_cache): Rename to ...
(readahead_cache::pread): ... this, and adjust to be a class
method.
(remote_hostio_close): Adjust.
A bit of C++ification. Also plugs a few leaks, since currently
nothing is freeing a few fields of remote_state. They're now freed in
the added destructor.
gdb/ChangeLog:
2018-05-22 Pedro Alves <palves@redhat.com>
(struct vCont_action_support): Use bool and initialize all fields.
(struct readahead_cache): Initialize all fields.
(remote_state): Use bool and initialize all fields.
(remote_state::remote_state, remote_state::~remote_state): New.
(new_remote_state): Delete.
(_initialize_remote): Use new to allocate remote_state.
Currently command lines are reference counted using shared_ptr only
when attached to breakpoints. This patch changes gdb to use
shared_ptr in commands as well. This allows for the removal of
copy_command_lines.
Note that the change to execute_user_command explicitly makes a new
reference to the command line. This will be used in a later patch.
This simplifies struct command_line based on the observation that a
given command can have at most two child bodies: an "if" can have both
"then" and "else" parts. Perhaps the names I've chosen for the
replacements here are not very good -- your input requested.
ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
* tracepoint.c (all_tracepoint_actions): Rename from
all_tracepoint_actions_and_cleanup. Change return type.
(actions_command, encode_actions_1, encode_actions)
(trace_dump_actions, tdump_command): Update.
* remote.c (remote_download_command_source): Update.
* python/python.c (gdbpy_eval_from_control_command)
(python_command, python_interactive_command): Update.
* mi/mi-cmd-break.c (mi_cmd_break_commands): Update.
* guile/guile.c (guile_command)
(gdbscm_eval_from_control_command, guile_command): Update.
* compile/compile.c (compile_code_command)
(compile_print_command, compile_to_object): Update.
* cli/cli-script.h (struct command_lines_deleter): New.
(counted_command_line): New typedef.
(struct command_line): Add constructor, destructor.
<body_list>: Remove.
<body_list_0, body_list_1>: New members.
(command_line_up): Remove typedef.
(read_command_lines, read_command_lines_1, get_command_line):
Update.
(copy_command_lines): Don't declare.
* cli/cli-script.c (build_command_line): Use "new".
(get_command_line): Return counted_command_line.
(print_command_lines, execute_user_command)
(execute_control_command_1, while_command, if_command): Update.
(realloc_body_list): Remove.
(process_next_line, recurse_read_control_structure): Update.
(read_command_lines, read_command_lines_1): Return counted_command_line.
(free_command_lines): Use "delete".
(copy_command_lines): Remove.
(define_command, document_command, show_user_1): Update.
* cli/cli-decode.h (struct cmd_list_element) <user_commands>: Now
a counted_command_line.
* breakpoint.h (counted_command_line): Remove typedef.
(breakpoint_set_commands): Update.
* breakpoint.c (check_no_tracepoint_commands)
(validate_commands_for_breakpoint): Update.
(breakpoint_set_commands): Change commands to be a
counted_command_line.
(commands_command_1, update_dprintf_command_list)
(create_tracepoint_from_upload): Update.
This removes a cleanup from remote.c by using std::string to construct
the qSupported packet.
Tested by the buildbot.
ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
* remote.c (remote_query_supported_append): Change type.
(remote_check_symbols): Update.
Currently, to open a target, with "target TARGET_NAME", GDB finds the
target_ops instance with "TARGET_NAME" as short name, and then calls
its target_ops::open virtual method. In reality, there's no actual
target/name lookup, a pointer to the target_ops object was associated
with the "target TARGET_NAME" command at add_target time (when GDB is
initialized), as the command's context.
This creates a chicken and egg situation. Consider the case of
wanting to open multiple remote connections. We want to be able to
have one remote target_ops instance per connection, but, if we're not
connected yet, so we don't yet have an instance to call target->open()
on...
This patch fixes this by separating out common info about a target_ops
to a separate structure (shortname, longname, doc), and changing the
add_target routine to take a reference to such an object instead of a
pointer to a target_ops, and a pointer to a factory function that is
responsible to open an instance of the corresponding target when the
user types "target TARGET_NAME".
-extern void add_target (struct target_ops *);
+extern void add_target (const target_info &info, target_open_ftype *func);
I.e. this factory function replaces the target_ops::open virtual
method.
For static/singleton targets, nothing changes, the target_open_ftype
function pushes the global target_ops instance on the target stack.
At target_close time, the connection is tor down, but the global
target_ops object remains live.
However, targets that support being open multiple times will make
their target_open_ftype routine allocate a new target_ops instance on
the heap [e.g., new remote_target()], and push that on the stack. At
target_close time, the new object is destroyed (by the
target_ops::close virtual method).
Both the core target and the remote targets will support being open
multiple times (others could/should too, but those were my stopping
point), but not in this patch yet. We need to get rid of more globals
first before that'd be useful.
Native targets are somewhat special, given find_default_run_target &
friends. Those routines also expect to return a target_ops pointer,
even before we've open the target. However, we'll never need more
than one instance of the native target, so we can assume/require that
native targets are global/simpletons, and have the backends register a
pointer to the native target_ops. Since all native targets inherit
inf_child_target, we can centralize that registration. See
add_inf_child_target, get_native_target/set_native_target and
find_default_run_target.
gdb/ChangeLog:
2018-05-02 Pedro Alves <palves@redhat.com>
* aarch64-fbsd-nat.c (_initialize_aarch64_fbsd_nat): Use
add_inf_child_target.
* aarch64-linux-nat.c (_initialize_aarch64_linux_nat): Use
add_inf_child_target.
* aix-thread.c (aix_thread_target_info): New.
(aix_thread_target) <shortname, longname, doc>: Delete.
<info>: New.
* alpha-bsd-nat.c (_initialize_alphabsd_nat): Use
add_inf_child_target.
* alpha-linux-nat.c (_initialize_alpha_linux_nat): Use
add_inf_child_target.
* amd64-fbsd-nat.c (_initialize_amd64fbsd_nat): Use
add_inf_child_target.
* amd64-linux-nat.c (_initialize_amd64_linux_nat): Use
add_inf_child_target.
* amd64-nbsd-nat.c (_initialize_amd64nbsd_nat): Use
add_inf_child_target.
* amd64-obsd-nat.c (_initialize_amd64obsd_nat): Use
add_inf_child_target.
* arm-fbsd-nat.c (_initialize_arm_fbsd_nat): Use
add_inf_child_target.
* arm-linux-nat.c (_initialize_arm_linux_nat): Use
add_inf_child_target.
* arm-nbsd-nat.c (_initialize_arm_netbsd_nat): Use
add_inf_child_target.
* bfd-target.c (target_bfd_target_info): New.
(target_bfd) <shortname, longname, doc>: Delete.
<info>: New.
* bsd-kvm.c (bsd_kvm_target_info): New.
(bsd_kvm_target) <shortname, longname, doc>: Delete.
<info>: New.
(bsd_kvm_target::open): Rename to ...
(bsd_kvm_target_open): ... this. Adjust.
* bsd-uthread.c (bsd_uthread_target_info): New.
(bsd_uthread_target) <shortname, longname, doc>: Delete.
<info>: New.
* corefile.c (core_file_command): Adjust.
* corelow.c (core_target_info): New.
(core_target) <shortname, longname, doc>: Delete.
<info>: New.
(core_target::open): Rename to ...
(core_target_open): ... this. Adjust.
* ctf.c (ctf_target_info): New.
(ctf_target) <shortname, longname, doc>: Delete.
<info>: New.
(ctf_target::open): Rename to ...
(ctf_target_open): ... this.
(_initialize_ctf): Adjust.
* exec.c (exec_target_info): New.
(exec_target) <shortname, longname, doc>: Delete.
<info>: New.
(exec_target::open): Rename to ...
(exec_target_open): ... this.
* gdbcore.h (core_target_open): Declare.
* go32-nat.c (_initialize_go32_nat): Use add_inf_child_target.
* hppa-linux-nat.c (_initialize_hppa_linux_nat): Use
add_inf_child_target.
* hppa-nbsd-nat.c (_initialize_hppanbsd_nat): Use
add_inf_child_target.
* hppa-obsd-nat.c (_initialize_hppaobsd_nat): Use
add_inf_child_target.
* i386-darwin-nat.c (_initialize_i386_darwin_nat): Use
add_inf_child_target.
* i386-fbsd-nat.c (_initialize_i386fbsd_nat): Use
add_inf_child_target.
* i386-gnu-nat.c (_initialize_i386gnu_nat): Use
add_inf_child_target.
* i386-linux-nat.c (_initialize_i386_linux_nat): Use
add_inf_child_target.
* i386-nbsd-nat.c (_initialize_i386nbsd_nat): Use
add_inf_child_target.
* i386-obsd-nat.c (_initialize_i386obsd_nat): Use
add_inf_child_target.
* ia64-linux-nat.c (_initialize_ia64_linux_nat): Use
add_inf_child_target.
* inf-child.c (inf_child_target_info): New.
(inf_child_target::info): New.
(inf_child_open_target): Remove 'target' parameter. Use
get_native_target instead.
(inf_child_target::open): Delete.
(add_inf_child_target): New.
* inf-child.h (inf_child_target) <shortname, longname, doc, open>:
Delete.
<info>: New.
(add_inf_child_target): Declare.
(inf_child_open_target): Declare.
* linux-thread-db.c (thread_db_target_info): New.
(thread_db_target) <shortname, longname, doc>: Delete.
<info>: New.
* m32r-linux-nat.c (_initialize_m32r_linux_nat): Use
add_inf_child_target.
* m68k-bsd-nat.c (_initialize_m68kbsd_nat): Use
add_inf_child_target.
* m68k-linux-nat.c (_initialize_m68k_linux_nat): Use
add_inf_child_target.
* m88k-bsd-nat.c (_initialize_m88kbsd_nat): Use
add_inf_child_target.
* make-target-delegates (print_class): Adjust.
* mips-fbsd-nat.c (_initialize_mips_fbsd_nat): Use
add_inf_child_target.
* mips-linux-nat.c (_initialize_mips_linux_nat): Use
add_inf_child_target.
* mips-nbsd-nat.c (_initialize_mipsnbsd_nat): Use
add_inf_child_target.
* mips64-obsd-nat.c (_initialize_mips64obsd_nat): Use
add_inf_child_target.
* nto-procfs.c (nto_native_target_info): New.
(nto_procfs_target_native) <shortname, longname, doc>:
Delete.
<info>: New.
(nto_procfs_target_info): New.
(nto_procfs_target_procfs) <shortname, longname, doc>:
Delete.
<info>: New.
(init_procfs_targets): Adjust.
* ppc-fbsd-nat.c (_initialize_ppcfbsd_nat): Use
add_inf_child_target.
* ppc-linux-nat.c (_initialize_ppc_linux_nat): Use
add_inf_child_target.
* ppc-nbsd-nat.c (_initialize_ppcnbsd_nat): Use
add_inf_child_target.
* ppc-obsd-nat.c (_initialize_ppcobsd_nat): Use
add_inf_child_target.
* ravenscar-thread.c (ravenscar_target_info): New.
(ravenscar_thread_target) <shortname, longname, doc>:
Delete.
<info>: New.
* record-btrace.c (record_btrace_target_info):
(record_btrace_target) <shortname, longname, doc>: Delete.
<info>: New.
(record_btrace_target::open): Rename to ...
(record_btrace_target_open): ... this. Adjust.
* record-full.c (record_longname, record_doc): New.
(record_full_base_target) <shortname, longname, doc>: Delete.
<info>: New.
(record_full_target_info): New.
(record_full_target): <shortname>: Delete.
<info>: New.
(record_full_core_open_1, record_full_open_1): Update comments.
(record_full_base_target::open): Rename to ...
(record_full_open): ... this.
(cmd_record_full_restore): Update.
(_initialize_record_full): Update.
* remote-sim.c (remote_sim_target_info): New.
(gdbsim_target) <shortname, longname, doc>: Delete.
<info>: New.
(gdbsim_target::open): Rename to ...
(gdbsim_target_open): ... this.
(_initialize_remote_sim): Adjust.
* remote.c (remote_doc): New.
(remote_target_info): New.
(remote_target) <shortname, longname, doc>: Delete.
<info>: New.
(extended_remote_target_info): New.
(extended_remote_target) <shortname, longname, doc>: Delete.
<info>: New.
(remote_target::open_1): Make static. Adjust.
* rs6000-nat.c (_initialize_rs6000_nat): Use add_inf_child_target.
* s390-linux-nat.c (_initialize_s390_nat): Use
add_inf_child_target.
* sh-nbsd-nat.c (_initialize_shnbsd_nat): Use
add_inf_child_target.
* sol-thread.c (thread_db_target_info): New.
(sol_thread_target) <shortname, longname, doc>: Delete.
<info>: New.
* sparc-linux-nat.c (_initialize_sparc_linux_nat): Use
add_inf_child_target.
* sparc-nbsd-nat.c (_initialize_sparcnbsd_nat): Use
add_inf_child_target.
* sparc64-fbsd-nat.c (_initialize_sparc64fbsd_nat): Use
add_inf_child_target.
* sparc64-linux-nat.c (_initialize_sparc64_linux_nat): Use
add_inf_child_target.
* sparc64-nbsd-nat.c (_initialize_sparc64nbsd_nat): Use
add_inf_child_target.
* sparc64-obsd-nat.c (_initialize_sparc64obsd_nat): Use
add_inf_child_target.
* spu-linux-nat.c (_initialize_spu_nat): Use
add_inf_child_target.
* spu-multiarch.c (spu_multiarch_target_info): New.
(spu_multiarch_target) <shortname, longname, doc>: Delete.
<info>: New.
* target-delegates.c: Regenerate.
* target.c: Include <unordered_map>.
(target_ops_p): Delete.
(DEF_VEC_P(target_ops_p)): Delete.
(target_factories): New.
(test_target_info): New.
(test_target_ops::info): New.
(open_target): Adjust to use target_factories.
(add_target_with_completer): Rename to ...
(add_target): ... this. Change prototype. Register target_info
and open callback in target_factories. Register target_info in
command context instead of target_ops.
(add_target): Delete old implementation.
(add_deprecated_target_alias): Change prototype. Adjust.
(the_native_target): New.
(set_native_target, get_native_target): New.
(find_default_run_target): Use the_native_target.
(find_attach_target, find_run_target): Simplify.
(target_ops::open): Delete.
(dummy_target_info): New.
(dummy_target::shortname, dummy_target::longname)
(dummy_target::doc): Delete.
(dummy_target::info): New.
(debug_target::shortname, debug_target::longname)
(debug_target::doc): Delete.
(debug_target::info): New.
* target.h (struct target_info): New.
(target_ops::~target_ops): Add comment.
(target_ops::info): New.
(target_ops::shortname, target_ops::longname, target_ops::doc): No
longer virtual. Implement in terms of target_info.
(set_native_target, get_native_target): Declare.
(target_open_ftype): New.
(add_target, add_target_with_completer)
(add_deprecated_target_alias): Change prototype.
(test_target) <shortname, longname, doc>: Delete.
<info>: New.
* tilegx-linux-nat.c (_initialize_tile_linux_nat): Use
add_inf_child_target.
* tracefile-tfile.c (tfile_target_info): New.
(tfile_target) <shortname, longname, doc>: Delete.
<info>: New.
(tfile_target::open): Rename to ...
(tfile_target_open): ... this.
(_initialize_tracefile_tfile): Adjust.
* vax-bsd-nat.c (_initialize_vaxbsd_nat): Use
add_inf_child_target.
* windows-nat.c (_initialize_windows_nat): Use
add_inf_child_target.
* xtensa-linux-nat.c (_initialize_xtensa_linux_nat): Use
add_inf_child_target.
After the previous target_ops/C++ patches are all squashed and merged,
this one can go in separately.
This patch adjusts all the target methods to return bool instead of int
when they're returning a boolean.
gdb/ChangeLog:
2018-05-02 Pedro Alves <palves@redhat.com>
* target.h (target_ops)
<stopped_by_sw_breakpoint, supports_stopped_by_sw_breakpoint,
stopped_by_hw_breakpoint, supports_stopped_by_hw_breakpoint,
stopped_by_watchpoint, have_continuable_watchpoint,
stopped_data_address, watchpoint_addr_within_range,
can_accel_watchpoint_condition, can_run, thread_alive,
has_all_memory, has_memory, has_stack, has_registers,
has_execution, can_async_p, is_async_p, supports_non_stop,
always_non_stop_p, can_execute_reverse, supports_multi_process,
supports_enable_disable_tracepoint,
supports_disable_randomization, supports_string_tracing,
supports_evaluation_of_breakpoint_conditions,
can_run_breakpoint_commands, filesystem_is_local,
can_download_tracepoint, get_trace_state_variable_value,
set_trace_notes, get_tib_address, use_agent, can_use_agent,
record_is_replaying, record_will_replay,
augmented_libraries_svr4_read>: Adjust to return bool.
* aarch64-linux-nat.c: All implementations adjusted.
* aix-thread.c: All implementations adjusted.
* arm-linux-nat.c: All implementations adjusted.
* breakpoint.c: All implementations adjusted.
* bsd-kvm.c: All implementations adjusted.
* bsd-uthread.c: All implementations adjusted.
* corelow.c: All implementations adjusted.
* ctf.c: All implementations adjusted.
* darwin-nat.c: All implementations adjusted.
* darwin-nat.h: All implementations adjusted.
* exec.c: All implementations adjusted.
* fbsd-nat.c: All implementations adjusted.
* fbsd-nat.h: All implementations adjusted.
* gnu-nat.c: All implementations adjusted.
* gnu-nat.h: All implementations adjusted.
* go32-nat.c: All implementations adjusted.
* ia64-linux-nat.c: All implementations adjusted.
* inf-child.c: All implementations adjusted.
* inf-child.h: All implementations adjusted.
* inf-ptrace.c: All implementations adjusted.
* inf-ptrace.h: All implementations adjusted.
* linux-nat.c: All implementations adjusted.
* linux-nat.h: All implementations adjusted.
* mips-linux-nat.c: All implementations adjusted.
* nto-procfs.c: All implementations adjusted.
* ppc-linux-nat.c: All implementations adjusted.
* procfs.c: All implementations adjusted.
* ravenscar-thread.c: All implementations adjusted.
* record-btrace.c: All implementations adjusted.
* record-full.c: All implementations adjusted.
* remote-sim.c: All implementations adjusted.
* remote.c: All implementations adjusted.
* s390-linux-nat.c: All implementations adjusted.
* sol-thread.c: All implementations adjusted.
* spu-multiarch.c: All implementations adjusted.
* target-delegates.c: All implementations adjusted.
* target.c: All implementations adjusted.
* target.h: All implementations adjusted.
* tracefile-tfile.c: All implementations adjusted.
* tracefile.c: All implementations adjusted.
* tracefile.h: All implementations adjusted.
* windows-nat.c: All implementations adjusted.
* x86-linux-nat.h: All implementations adjusted.
* x86-nat.h: All implementations adjusted.
I.e., use C++ virtual methods and inheritance instead of tables of
function pointers.
Unfortunately, there's no way to do a smooth transition. ALL native
targets in the tree must be converted at the same time. I've tested
all I could with cross compilers and with help from GCC compile farm,
but naturally I haven't been able to test many of the ports. Still, I
made a best effort to port everything over, and while I expect some
build problems due to typos and such, which should be trivial to fix,
I don't expect any design problems.
* Implementation notes:
- The flattened current_target is gone. References to current_target
or current_target.beneath are replaced with references to
target_stack (the top of the stack) directly.
- To keep "set debug target" working, this adds a new debug_stratum
layer that sits on top of the stack, prints the debug, and delegates
to the target beneath.
In addition, this makes the shortname and longname properties of
target_ops be virtual methods instead of data fields, and makes the
debug target defer those to the target beneath. This is so that
debug code sprinkled around that does "if (debugtarget) ..." can
transparently print the name of the target beneath.
A patch later in the series actually splits out the
shortname/longname methods to a separate structure, but I preferred
to keep that chance separate as it is associated with changing a bit
the design of how targets are registered and open.
- Since you can't check whether a C++ virtual method is overridden,
the old method of checking whether a target_ops implements a method
by comparing the function pointer must be replaced with something
else.
Some cases are fixed by adding a parallel "can_do_foo" target_ops
methods. E.g.,:
+ for (t = target_stack; t != NULL; t = t->beneath)
{
- if (t->to_create_inferior != NULL)
+ if (t->can_create_inferior ())
break;
}
Others are fixed by changing void return type to bool or int return
type, and have the default implementation return false or -1, to
indicate lack of support.
- make-target-delegates was adjusted to generate C++ classes and
methods.
It needed tweaks to grok "virtual" in front of the target method
name, and for the fact that methods are no longer function pointers.
(In particular, the current code parsing the return type was simple
because it could simply parse up until the '(' in '(*to_foo)'.
It now generates a couple C++ classes that inherit target_ops:
dummy_target and debug_target.
Since we need to generate the class declarations as well, i.e., we
need to emit methods twice, we now generate the code in two passes.
- The core_target global is renamed to avoid conflict with the
"core_target" class.
- ctf/tfile targets
init_tracefile_ops is replaced by a base class that is inherited by
both ctf and tfile.
- bsd-uthread
The bsd_uthread_ops_hack hack is gone. It's not needed because
nothing was extending a target created by bsd_uthread_target.
- remote/extended-remote targets
This is a first pass, just enough to C++ify target_ops.
A later pass will convert more free functions to methods, and make
remote_state be truly per remote instance, allowing multiple
simultaneous instances of remote targets.
- inf-child/"native" is converted to an actual base class
(inf_child_target), that is inherited by all native targets.
- GNU/Linux
The old weird double-target linux_ops mechanism in linux-nat.c, is
gone, replaced by adding a few virtual methods to linux-nat.h's
target_ops, called low_XXX, that the concrete linux-nat
implementations override. Sort of like gdbserver's
linux_target_ops, but simpler, for requiring only one
target_ops-like hierarchy, which spares implementing the same method
twice when we need to forward the method to a low implementation.
The low target simply reimplements the target_ops method directly in
that case.
There are a few remaining linux-nat.c hooks that would be better
converted to low_ methods like above too. E.g.:
linux_nat_set_new_thread (t, x86_linux_new_thread);
linux_nat_set_new_fork (t, x86_linux_new_fork);
linux_nat_set_forget_process
That'll be done in a follow up patch.
- We can no longer use functions like x86_use_watchpoints to install
custom methods on an arbitrary base target.
The patch replaces instances of such a pattern with template mixins.
For example memory_breakpoint_target defined in target.h, or
x86_nat_target in x86-nat.h.
- linux_trad_target, MIPS and Alpha GNU/Linux
The code in the new linux-nat-trad.h/c files which was split off of
inf-ptrace.h/c recently, is converted to a C++ base class, and used
by the MIPS and Alpha GNU/Linux ports.
- BSD targets
The
$architecture x NetBSD/OpenBSD/FreeBSD
support matrix complicates things a bit. There's common BSD target
code, and there's common architecture-specific code shared between
the different BSDs. Currently, all that is stiched together to form
a final target, via the i386bsd_target, x86bsd_target,
fbsd_nat_add_target functions etc.
This introduces new fbsd_nat_target, obsd_nat_target and
nbsd_nat_target classes that serve as base/prototype target for the
corresponding BSD variant.
And introduces generic i386/AMD64 BSD targets, to be used as
template mixin to build a final target. Similarly, a generic SPARC
target is added, used by both BSD and Linux ports.
- bsd_kvm_add_target, BSD libkvm target
I considered making bsd_kvm_supply_pcb a virtual method, and then
have each port inherit bsd_kvm_target and override that method, but
that was resulting in lots of unjustified churn, so I left the
function pointer mechanism alone.
gdb/ChangeLog:
2018-05-02 Pedro Alves <palves@redhat.com>
John Baldwin <jhb@freebsd.org>
* target.h (enum strata) <debug_stratum>: New.
(struct target_ops) <all delegation methods>: Replace by C++
virtual methods, and drop "to_" prefix. All references updated
throughout.
<to_shortname, to_longname, to_doc, to_data,
to_have_steppable_watchpoint, to_have_continuable_watchpoint,
to_has_thread_control, to_attach_no_wait>: Delete, replaced by
virtual methods. All references updated throughout.
<can_attach, supports_terminal_ours, can_create_inferior,
get_thread_control_capabilities, attach_no_wait>: New
virtual methods.
<insert_breakpoint, remove_breakpoint>: Now
TARGET_DEFAULT_NORETURN methods.
<info_proc>: Now returns bool.
<to_magic>: Delete.
(OPS_MAGIC): Delete.
(current_target): Delete. All references replaced by references
to ...
(target_stack): ... this. New.
(target_shortname, target_longname): Adjust.
(target_can_run): Now a function declaration.
(default_child_has_all_memory, default_child_has_memory)
(default_child_has_stack, default_child_has_registers)
(default_child_has_execution): Remove target_ops parameter.
(complete_target_initialization): Delete.
(memory_breakpoint_target): New template class.
(test_target_ops): Refactor as a C++ class with virtual methods.
* make-target-delegates (NAME_PART): Tighten.
(POINTER_PART, CP_SYMBOL): New.
(SIMPLE_RETURN_PART): Reimplement.
(VEC_RETURN_PART): Expect less.
(RETURN_PART, VIRTUAL_PART): New.
(METHOD): Adjust to C++ virtual methods.
(scan_target_h): Remove reference to C99.
(dname): Output "target_ops::" prefix.
(write_function_header): Adjust to output a C++ class method.
(write_declaration): New.
(write_delegator): Adjust to output a C++ class method.
(tdname): Output "dummy_target::" prefix.
(write_tdefault, write_debugmethod): Adjust to output a C++ class
method.
(tdefault_names, debug_names): Delete.
(return_types, tdefaults, styles, argtypes_array): New.
(top level): All methods are delegators.
(print_class): New.
(top level): Print dummy_target and debug_target classes.
* target-delegates.c: Regenerate.
* target-debug.h (target_debug_print_enum_info_proc_what)
(target_debug_print_thread_control_capabilities)
(target_debug_print_thread_info_p): New.
* target.c (dummy_target): Delete.
(the_dummy_target, the_debug_target): New.
(target_stack): Now extern.
(set_targetdebug): Push/unpush debug target.
(default_child_has_all_memory, default_child_has_memory)
(default_child_has_stack, default_child_has_registers)
(default_child_has_execution): Remove target_ops parameter.
(complete_target_initialization): Delete.
(add_target_with_completer): No longer call
complete_target_initialization.
(target_supports_terminal_ours): Use regular delegation.
(update_current_target): Delete.
(push_target): No longer check magic number. Don't call
update_current_target.
(unpush_target): Don't call update_current_target.
(target_is_pushed): No longer check magic number.
(target_require_runnable): Skip for all stratums over
process_stratum.
(target_ops::info_proc): New.
(target_info_proc): Use find_target_at and
find_default_run_target.
(target_supports_disable_randomization): Use regular delegation.
(target_get_osdata): Use find_target_at.
(target_ops::open, target_ops::close, target_ops::can_attach)
(target_ops::attach, target_ops::can_create_inferior)
(target_ops::create_inferior, target_ops::can_run)
(target_can_run): New.
(default_fileio_target): Use regular delegation.
(target_ops::fileio_open, target_ops::fileio_pwrite)
(target_ops::fileio_pread, target_ops::fileio_fstat)
(target_ops::fileio_close, target_ops::fileio_unlink)
(target_ops::fileio_readlink): New.
(target_fileio_open_1, target_fileio_unlink)
(target_fileio_readlink): Always call the target method. Handle
FILEIO_ENOSYS.
(return_zero, return_zero_has_execution): Delete.
(init_dummy_target): Delete.
(dummy_target::dummy_target, dummy_target::shortname)
(dummy_target::longname, dummy_target::doc)
(debug_target::debug_target, debug_target::shortname)
(debug_target::longname, debug_target::doc): New.
(target_supports_delete_record): Use regular delegation.
(setup_target_debug): Delete.
(maintenance_print_target_stack): Skip debug_stratum.
(initialize_targets): Instantiate the_dummy_target and
the_debug_target.
* auxv.c (target_auxv_parse): Remove 'ops' parameter. Adjust to
use target_stack.
(target_auxv_search, fprint_target_auxv): Adjust.
(info_auxv_command): Adjust to use target_stack.
* auxv.h (target_auxv_parse): Remove 'ops' parameter.
* exceptions.c (print_flush): Handle a NULL target_stack.
* regcache.c (target_ops_no_register): Refactor as class with
virtual methods.
* exec.c (exec_target): New class.
(exec_ops): Now an exec_target.
(exec_open, exec_close_1, exec_get_section_table)
(exec_xfer_partial, exec_files_info, exec_has_memory)
(exec_make_note_section): Refactor as exec_target methods.
(exec_file_clear, ignore, exec_remove_breakpoint, init_exec_ops):
Delete.
(exec_target::find_memory_regions): New.
(_initialize_exec): Don't call init_exec_ops.
* gdbcore.h (exec_file_clear): Delete.
* corefile.c (core_target): Delete.
(core_file_command): Adjust.
* corelow.c (core_target): New class.
(the_core_target): New.
(core_close): Remove target_ops parameter.
(core_close_cleanup): Adjust.
(core_target::close): New.
(core_open, core_detach, get_core_registers, core_files_info)
(core_xfer_partial, core_thread_alive, core_read_description)
(core_pid_to_str, core_thread_name, core_has_memory)
(core_has_stack, core_has_registers, core_info_proc): Rework as
core_target methods.
(ignore, core_remove_breakpoint, init_core_ops): Delete.
(_initialize_corelow): Initialize the_core_target.
* gdbcore.h (core_target): Delete.
(the_core_target): New.
* ctf.c: (ctf_target): New class.
(ctf_ops): Now a ctf_target.
(ctf_open, ctf_close, ctf_files_info, ctf_fetch_registers)
(ctf_xfer_partial, ctf_get_trace_state_variable_value)
(ctf_trace_find, ctf_traceframe_info): Refactor as ctf_target
methods.
(init_ctf_ops): Delete.
(_initialize_ctf): Don't call it.
* tracefile-tfile.c (tfile_target): New class.
(tfile_ops): Now a tfile_target.
(tfile_open, tfile_close, tfile_files_info)
(tfile_get_tracepoint_status, tfile_trace_find)
(tfile_fetch_registers, tfile_xfer_partial)
(tfile_get_trace_state_variable_value, tfile_traceframe_info):
Refactor as tfile_target methods.
(tfile_xfer_partial_features): Remove target_ops parameter.
(init_tfile_ops): Delete.
(_initialize_tracefile_tfile): Don't call it.
* tracefile.c (tracefile_has_all_memory, tracefile_has_memory)
(tracefile_has_stack, tracefile_has_registers)
(tracefile_thread_alive, tracefile_get_trace_status): Refactor as
tracefile_target methods.
(init_tracefile_ops): Delete.
(tracefile_target::tracefile_target): New.
* tracefile.h: Include "target.h".
(tracefile_target): New class.
(init_tracefile_ops): Delete.
* spu-multiarch.c (spu_multiarch_target): New class.
(spu_ops): Now a spu_multiarch_target.
(spu_thread_architecture, spu_region_ok_for_hw_watchpoint)
(spu_fetch_registers, spu_store_registers, spu_xfer_partial)
(spu_search_memory, spu_mourn_inferior): Refactor as
spu_multiarch_target methods.
(init_spu_ops): Delete.
(_initialize_spu_multiarch): Remove references to init_spu_ops,
complete_target_initialization.
* ravenscar-thread.c (ravenscar_thread_target): New class.
(ravenscar_ops): Now a ravenscar_thread_target.
(ravenscar_resume, ravenscar_wait, ravenscar_update_thread_list)
(ravenscar_thread_alive, ravenscar_pid_to_str)
(ravenscar_fetch_registers, ravenscar_store_registers)
(ravenscar_prepare_to_store, ravenscar_stopped_by_sw_breakpoint)
(ravenscar_stopped_by_hw_breakpoint)
(ravenscar_stopped_by_watchpoint, ravenscar_stopped_data_address)
(ravenscar_mourn_inferior, ravenscar_core_of_thread)
(ravenscar_get_ada_task_ptid): Refactor as ravenscar_thread_target
methods.
(init_ravenscar_thread_ops): Delete.
(_initialize_ravenscar): Remove references to
init_ravenscar_thread_ops and complete_target_initialization.
* bsd-uthread.c (bsd_uthread_ops_hack): Delete.
(bsd_uthread_target): New class.
(bsd_uthread_ops): Now a bsd_uthread_target.
(bsd_uthread_activate): Adjust to refer to bsd_uthread_ops.
(bsd_uthread_close, bsd_uthread_mourn_inferior)
(bsd_uthread_fetch_registers, bsd_uthread_store_registers)
(bsd_uthread_wait, bsd_uthread_resume, bsd_uthread_thread_alive)
(bsd_uthread_update_thread_list, bsd_uthread_extra_thread_info)
(bsd_uthread_pid_to_str): Refactor as bsd_uthread_target methods.
(bsd_uthread_target): Delete function.
(_initialize_bsd_uthread): Remove reference to
complete_target_initialization.
* bfd-target.c (target_bfd_data): Delete. Fields folded into ...
(target_bfd): ... this new class.
(target_bfd_xfer_partial, target_bfd_get_section_table)
(target_bfd_close): Refactor as target_bfd methods.
(target_bfd::~target_bfd): New.
(target_bfd_reopen): Adjust.
(target_bfd::close): New.
* record-btrace.c (record_btrace_target): New class.
(record_btrace_ops): Now a record_btrace_target.
(record_btrace_open, record_btrace_stop_recording)
(record_btrace_disconnect, record_btrace_close)
(record_btrace_async, record_btrace_info)
(record_btrace_insn_history, record_btrace_insn_history_range)
(record_btrace_insn_history_from, record_btrace_call_history)
(record_btrace_call_history_range)
(record_btrace_call_history_from, record_btrace_record_method)
(record_btrace_is_replaying, record_btrace_will_replay)
(record_btrace_xfer_partial, record_btrace_insert_breakpoint)
(record_btrace_remove_breakpoint, record_btrace_fetch_registers)
(record_btrace_store_registers, record_btrace_prepare_to_store)
(record_btrace_to_get_unwinder)
(record_btrace_to_get_tailcall_unwinder, record_btrace_resume)
(record_btrace_commit_resume, record_btrace_wait)
(record_btrace_stop, record_btrace_can_execute_reverse)
(record_btrace_stopped_by_sw_breakpoint)
(record_btrace_supports_stopped_by_sw_breakpoint)
(record_btrace_stopped_by_hw_breakpoint)
(record_btrace_supports_stopped_by_hw_breakpoint)
(record_btrace_update_thread_list, record_btrace_thread_alive)
(record_btrace_goto_begin, record_btrace_goto_end)
(record_btrace_goto, record_btrace_stop_replaying_all)
(record_btrace_execution_direction)
(record_btrace_prepare_to_generate_core)
(record_btrace_done_generating_core): Refactor as
record_btrace_target methods.
(init_record_btrace_ops): Delete.
(_initialize_record_btrace): Remove reference to
init_record_btrace_ops.
* record-full.c (RECORD_FULL_IS_REPLAY): Adjust to always refer to
the execution_direction global.
(record_full_base_target, record_full_target)
(record_full_core_target): New classes.
(record_full_ops): Now a record_full_target.
(record_full_core_ops): Now a record_full_core_target.
(record_full_target::detach, record_full_target::disconnect)
(record_full_core_target::disconnect)
(record_full_target::mourn_inferior, record_full_target::kill):
New.
(record_full_open, record_full_close, record_full_async): Refactor
as methods of the record_full_base_target class.
(record_full_resume, record_full_commit_resume): Refactor
as methods of the record_full_target class.
(record_full_wait, record_full_stopped_by_watchpoint)
(record_full_stopped_data_address)
(record_full_stopped_by_sw_breakpoint)
(record_full_supports_stopped_by_sw_breakpoint)
(record_full_stopped_by_hw_breakpoint)
(record_full_supports_stopped_by_hw_breakpoint): Refactor as
methods of the record_full_base_target class.
(record_full_store_registers, record_full_xfer_partial)
(record_full_insert_breakpoint, record_full_remove_breakpoint):
Refactor as methods of the record_full_target class.
(record_full_can_execute_reverse, record_full_get_bookmark)
(record_full_goto_bookmark, record_full_execution_direction)
(record_full_record_method, record_full_info, record_full_delete)
(record_full_is_replaying, record_full_will_replay)
(record_full_goto_begin, record_full_goto_end, record_full_goto)
(record_full_stop_replaying): Refactor as methods of the
record_full_base_target class.
(record_full_core_resume, record_full_core_kill)
(record_full_core_fetch_registers)
(record_full_core_prepare_to_store)
(record_full_core_store_registers, record_full_core_xfer_partial)
(record_full_core_insert_breakpoint)
(record_full_core_remove_breakpoint)
(record_full_core_has_execution): Refactor
as methods of the record_full_core_target class.
(record_full_base_target::supports_delete_record): New.
(init_record_full_ops): Delete.
(init_record_full_core_ops): Delete.
(record_full_save): Refactor as method of the
record_full_base_target class.
(_initialize_record_full): Remove references to
init_record_full_ops and init_record_full_core_ops.
* remote.c (remote_target, extended_remote_target): New classes.
(remote_ops): Now a remote_target.
(extended_remote_ops): Now an extended_remote_target.
(remote_insert_fork_catchpoint, remote_remove_fork_catchpoint)
(remote_insert_vfork_catchpoint, remote_remove_vfork_catchpoint)
(remote_insert_exec_catchpoint, remote_remove_exec_catchpoint)
(remote_pass_signals, remote_set_syscall_catchpoint)
(remote_program_signals, )
(remote_thread_always_alive): Remove target_ops parameter.
(remote_thread_alive, remote_thread_name)
(remote_update_thread_list, remote_threads_extra_info)
(remote_static_tracepoint_marker_at)
(remote_static_tracepoint_markers_by_strid)
(remote_get_ada_task_ptid, remote_close, remote_start_remote)
(remote_open): Refactor as methods of remote_target.
(extended_remote_open, extended_remote_detach)
(extended_remote_attach, extended_remote_post_attach):
(extended_remote_supports_disable_randomization)
(extended_remote_create_inferior): : Refactor as method of
extended_remote_target.
(remote_set_permissions, remote_open_1, remote_detach)
(remote_follow_fork, remote_follow_exec, remote_disconnect)
(remote_resume, remote_commit_resume, remote_stop)
(remote_interrupt, remote_pass_ctrlc, remote_terminal_inferior)
(remote_terminal_ours, remote_wait, remote_fetch_registers)
(remote_prepare_to_store, remote_store_registers)
(remote_flash_erase, remote_flash_done, remote_files_info)
(remote_kill, remote_mourn, remote_insert_breakpoint)
(remote_remove_breakpoint, remote_insert_watchpoint)
(remote_watchpoint_addr_within_range)
(remote_remove_watchpoint, remote_region_ok_for_hw_watchpoint)
(remote_check_watch_resources, remote_stopped_by_sw_breakpoint)
(remote_supports_stopped_by_sw_breakpoint)
(remote_stopped_by_hw_breakpoint)
(remote_supports_stopped_by_hw_breakpoint)
(remote_stopped_by_watchpoint, remote_stopped_data_address)
(remote_insert_hw_breakpoint, remote_remove_hw_breakpoint)
(remote_verify_memory): Refactor as methods of remote_target.
(remote_write_qxfer, remote_read_qxfer): Remove target_ops
parameter.
(remote_xfer_partial, remote_get_memory_xfer_limit)
(remote_search_memory, remote_rcmd, remote_memory_map)
(remote_pid_to_str, remote_get_thread_local_address)
(remote_get_tib_address, remote_read_description): Refactor as
methods of remote_target.
(remote_target::fileio_open, remote_target::fileio_pwrite)
(remote_target::fileio_pread, remote_target::fileio_close): New.
(remote_hostio_readlink, remote_hostio_fstat)
(remote_filesystem_is_local, remote_can_execute_reverse)
(remote_supports_non_stop, remote_supports_disable_randomization)
(remote_supports_multi_process, remote_supports_cond_breakpoints)
(remote_supports_enable_disable_tracepoint)
(remote_supports_string_tracing)
(remote_can_run_breakpoint_commands, remote_trace_init)
(remote_download_tracepoint, remote_can_download_tracepoint)
(remote_download_trace_state_variable, remote_enable_tracepoint)
(remote_disable_tracepoint, remote_trace_set_readonly_regions)
(remote_trace_start, remote_get_trace_status)
(remote_get_tracepoint_status, remote_trace_stop)
(remote_trace_find, remote_get_trace_state_variable_value)
(remote_save_trace_data, remote_get_raw_trace_data)
(remote_set_disconnected_tracing, remote_core_of_thread)
(remote_set_circular_trace_buffer, remote_traceframe_info)
(remote_get_min_fast_tracepoint_insn_len)
(remote_set_trace_buffer_size, remote_set_trace_notes)
(remote_use_agent, remote_can_use_agent, remote_enable_btrace)
(remote_disable_btrace, remote_teardown_btrace)
(remote_read_btrace, remote_btrace_conf)
(remote_augmented_libraries_svr4_read, remote_load)
(remote_pid_to_exec_file, remote_can_do_single_step)
(remote_execution_direction, remote_thread_handle_to_thread_info):
Refactor as methods of remote_target.
(init_remote_ops, init_extended_remote_ops): Delete.
(remote_can_async_p, remote_is_async_p, remote_async)
(remote_thread_events, remote_upload_tracepoints)
(remote_upload_trace_state_variables): Refactor as methods of
remote_target.
(_initialize_remote): Remove references to init_remote_ops and
init_extended_remote_ops.
* remote-sim.c (gdbsim_target): New class.
(gdbsim_fetch_register, gdbsim_store_register, gdbsim_kill)
(gdbsim_load, gdbsim_create_inferior, gdbsim_open, gdbsim_close)
(gdbsim_detach, gdbsim_resume, gdbsim_interrupt)
(gdbsim_wait, gdbsim_prepare_to_store, gdbsim_xfer_partial)
(gdbsim_files_info, gdbsim_mourn_inferior, gdbsim_thread_alive)
(gdbsim_pid_to_str, gdbsim_has_all_memory, gdbsim_has_memory):
Refactor as methods of gdbsim_target.
(gdbsim_ops): Now a gdbsim_target.
(init_gdbsim_ops): Delete.
(gdbsim_cntrl_c): Adjust.
(_initialize_remote_sim): Remove reference to init_gdbsim_ops.
* amd64-linux-nat.c (amd64_linux_nat_target): New class.
(the_amd64_linux_nat_target): New.
(amd64_linux_fetch_inferior_registers)
(amd64_linux_store_inferior_registers): Refactor as methods of
amd64_linux_nat_target.
(_initialize_amd64_linux_nat): Adjust. Set linux_target.
* i386-linux-nat.c: Don't include "linux-nat.h".
(i386_linux_nat_target): New class.
(the_i386_linux_nat_target): New.
(i386_linux_fetch_inferior_registers)
(i386_linux_store_inferior_registers, i386_linux_resume): Refactor
as methods of i386_linux_nat_target.
(_initialize_i386_linux_nat): Adjust. Set linux_target.
* inf-child.c (inf_child_ops): Delete.
(inf_child_fetch_inferior_registers)
(inf_child_store_inferior_registers): Delete.
(inf_child_post_attach, inf_child_prepare_to_store): Refactor as
methods of inf_child_target.
(inf_child_target::supports_terminal_ours)
(inf_child_target::terminal_init)
(inf_child_target::terminal_inferior)
(inf_child_target::terminal_ours_for_output)
(inf_child_target::terminal_ours, inf_child_target::interrupt)
(inf_child_target::pass_ctrlc, inf_child_target::terminal_info):
New.
(inf_child_open, inf_child_disconnect, inf_child_close)
(inf_child_mourn_inferior, inf_child_maybe_unpush_target)
(inf_child_post_startup_inferior, inf_child_can_run)
(inf_child_pid_to_exec_file): Refactor as methods of
inf_child_target.
(inf_child_follow_fork): Delete.
(inf_child_target::can_create_inferior)
(inf_child_target::can_attach): New.
(inf_child_target::has_all_memory, inf_child_target::has_memory)
(inf_child_target::has_stack, inf_child_target::has_registers)
(inf_child_target::has_execution): New.
(inf_child_fileio_open, inf_child_fileio_pwrite)
(inf_child_fileio_pread, inf_child_fileio_fstat)
(inf_child_fileio_close, inf_child_fileio_unlink)
(inf_child_fileio_readlink, inf_child_use_agent)
(inf_child_can_use_agent): Refactor as methods of
inf_child_target.
(return_zero, inf_child_target): Delete.
(inf_child_target::inf_child_target): New.
* inf-child.h: Include "target.h".
(inf_child_target): Delete function prototype.
(inf_child_target): New class.
(inf_child_open_target, inf_child_mourn_inferior)
(inf_child_maybe_unpush_target): Delete.
* inf-ptrace.c (inf_ptrace_target::~inf_ptrace_target): New.
(inf_ptrace_follow_fork, inf_ptrace_insert_fork_catchpoint)
(inf_ptrace_remove_fork_catchpoint, inf_ptrace_create_inferior)
(inf_ptrace_post_startup_inferior, inf_ptrace_mourn_inferior)
(inf_ptrace_attach, inf_ptrace_post_attach, inf_ptrace_detach)
(inf_ptrace_detach_success, inf_ptrace_kill, inf_ptrace_resume)
(inf_ptrace_wait, inf_ptrace_xfer_partial)
(inf_ptrace_thread_alive, inf_ptrace_files_info)
(inf_ptrace_pid_to_str, inf_ptrace_auxv_parse): Refactor as
methods of inf_ptrace_target.
(inf_ptrace_target): Delete function.
* inf-ptrace.h: Include "inf-child.h".
(inf_ptrace_target): Delete function declaration.
(inf_ptrace_target): New class.
(inf_ptrace_trad_target, inf_ptrace_detach_success): Delete.
* linux-nat.c (linux_target): New.
(linux_ops, linux_ops_saved, super_xfer_partial): Delete.
(linux_nat_target::~linux_nat_target): New.
(linux_child_post_attach, linux_child_post_startup_inferior)
(linux_child_follow_fork, linux_child_insert_fork_catchpoint)
(linux_child_remove_fork_catchpoint)
(linux_child_insert_vfork_catchpoint)
(linux_child_remove_vfork_catchpoint)
(linux_child_insert_exec_catchpoint)
(linux_child_remove_exec_catchpoint)
(linux_child_set_syscall_catchpoint, linux_nat_pass_signals)
(linux_nat_create_inferior, linux_nat_attach, linux_nat_detach)
(linux_nat_resume, linux_nat_stopped_by_watchpoint)
(linux_nat_stopped_data_address)
(linux_nat_stopped_by_sw_breakpoint)
(linux_nat_supports_stopped_by_sw_breakpoint)
(linux_nat_stopped_by_hw_breakpoint)
(linux_nat_supports_stopped_by_hw_breakpoint, linux_nat_wait)
(linux_nat_kill, linux_nat_mourn_inferior)
(linux_nat_xfer_partial, linux_nat_thread_alive)
(linux_nat_update_thread_list, linux_nat_pid_to_str)
(linux_nat_thread_name, linux_child_pid_to_exec_file)
(linux_child_static_tracepoint_markers_by_strid)
(linux_nat_is_async_p, linux_nat_can_async_p)
(linux_nat_supports_non_stop, linux_nat_always_non_stop_p)
(linux_nat_supports_multi_process)
(linux_nat_supports_disable_randomization, linux_nat_async)
(linux_nat_stop, linux_nat_close, linux_nat_thread_address_space)
(linux_nat_core_of_thread, linux_nat_filesystem_is_local)
(linux_nat_fileio_open, linux_nat_fileio_readlink)
(linux_nat_fileio_unlink, linux_nat_thread_events): Refactor as
methods of linux_nat_target.
(linux_nat_wait_1, linux_xfer_siginfo, linux_proc_xfer_partial)
(linux_proc_xfer_spu, linux_nat_xfer_osdata): Remove target_ops
parameter.
(check_stopped_by_watchpoint): Adjust.
(linux_xfer_partial): Delete.
(linux_target_install_ops, linux_target, linux_nat_add_target):
Delete.
(linux_nat_target::linux_nat_target): New.
* linux-nat.h: Include "inf-ptrace.h".
(linux_nat_target): New.
(linux_target, linux_target_install_ops, linux_nat_add_target):
Delete function declarations.
(linux_target): Declare global.
* linux-thread-db.c (thread_db_target): New.
(thread_db_target::thread_db_target): New.
(thread_db_ops): Delete.
(the_thread_db_target): New.
(thread_db_detach, thread_db_wait, thread_db_mourn_inferior)
(thread_db_update_thread_list, thread_db_pid_to_str)
(thread_db_extra_thread_info)
(thread_db_thread_handle_to_thread_info)
(thread_db_get_thread_local_address, thread_db_get_ada_task_ptid)
(thread_db_resume): Refactor as methods of thread_db_target.
(init_thread_db_ops): Delete.
(_initialize_thread_db): Remove reference to init_thread_db_ops.
* x86-linux-nat.c: Don't include "linux-nat.h".
(super_post_startup_inferior): Delete.
(x86_linux_nat_target::~x86_linux_nat_target): New.
(x86_linux_child_post_startup_inferior)
(x86_linux_read_description, x86_linux_enable_btrace)
(x86_linux_disable_btrace, x86_linux_teardown_btrace)
(x86_linux_read_btrace, x86_linux_btrace_conf): Refactor as
methods of x86_linux_nat_target.
(x86_linux_create_target): Delete. Bits folded ...
(x86_linux_add_target): ... here. Now takes a linux_nat_target
pointer.
* x86-linux-nat.h: Include "linux-nat.h" and "x86-nat.h".
(x86_linux_nat_target): New class.
(x86_linux_create_target): Delete.
(x86_linux_add_target): Now takes a linux_nat_target pointer.
* x86-nat.c (x86_insert_watchpoint, x86_remove_watchpoint)
(x86_region_ok_for_watchpoint, x86_stopped_data_address)
(x86_stopped_by_watchpoint, x86_insert_hw_breakpoint)
(x86_remove_hw_breakpoint, x86_can_use_hw_breakpoint)
(x86_stopped_by_hw_breakpoint): Remove target_ops parameter and
make extern.
(x86_use_watchpoints): Delete.
* x86-nat.h: Include "breakpoint.h" and "target.h".
(x86_use_watchpoints): Delete.
(x86_can_use_hw_breakpoint, x86_region_ok_for_hw_watchpoint)
(x86_stopped_by_watchpoint, x86_stopped_data_address)
(x86_insert_watchpoint, x86_remove_watchpoint)
(x86_insert_hw_breakpoint, x86_remove_hw_breakpoint)
(x86_stopped_by_hw_breakpoint): New declarations.
(x86_nat_target): New template class.
* ppc-linux-nat.c (ppc_linux_nat_target): New class.
(the_ppc_linux_nat_target): New.
(ppc_linux_fetch_inferior_registers)
(ppc_linux_can_use_hw_breakpoint)
(ppc_linux_region_ok_for_hw_watchpoint)
(ppc_linux_ranged_break_num_registers)
(ppc_linux_insert_hw_breakpoint, ppc_linux_remove_hw_breakpoint)
(ppc_linux_insert_mask_watchpoint)
(ppc_linux_remove_mask_watchpoint)
(ppc_linux_can_accel_watchpoint_condition)
(ppc_linux_insert_watchpoint, ppc_linux_remove_watchpoint)
(ppc_linux_stopped_data_address, ppc_linux_stopped_by_watchpoint)
(ppc_linux_watchpoint_addr_within_range)
(ppc_linux_masked_watch_num_registers)
(ppc_linux_store_inferior_registers, ppc_linux_auxv_parse)
(ppc_linux_read_description): Refactor as methods of
ppc_linux_nat_target.
(_initialize_ppc_linux_nat): Adjust. Set linux_target.
* procfs.c (procfs_xfer_partial): Delete forward declaration.
(procfs_target): New class.
(the_procfs_target): New.
(procfs_target): Delete function.
(procfs_auxv_parse, procfs_attach, procfs_detach)
(procfs_fetch_registers, procfs_store_registers, procfs_wait)
(procfs_xfer_partial, procfs_resume, procfs_pass_signals)
(procfs_files_info, procfs_kill_inferior, procfs_mourn_inferior)
(procfs_create_inferior, procfs_update_thread_list)
(procfs_thread_alive, procfs_pid_to_str)
(procfs_can_use_hw_breakpoint, procfs_stopped_by_watchpoint)
(procfs_stopped_data_address, procfs_insert_watchpoint)
(procfs_remove_watchpoint, procfs_region_ok_for_hw_watchpoint)
(proc_find_memory_regions, procfs_info_proc)
(procfs_make_note_section): Refactor as methods of procfs_target.
(_initialize_procfs): Adjust.
* sol-thread.c (sol_thread_target): New class.
(sol_thread_ops): Now a sol_thread_target.
(sol_thread_detach, sol_thread_resume, sol_thread_wait)
(sol_thread_fetch_registers, sol_thread_store_registers)
(sol_thread_xfer_partial, sol_thread_mourn_inferior)
(sol_thread_alive, solaris_pid_to_str, sol_update_thread_list)
(sol_get_ada_task_ptid): Refactor as methods of sol_thread_target.
(init_sol_thread_ops): Delete.
(_initialize_sol_thread): Adjust. Remove references to
init_sol_thread_ops and complete_target_initialization.
* windows-nat.c (windows_nat_target): New class.
(windows_fetch_inferior_registers)
(windows_store_inferior_registers, windows_resume, windows_wait)
(windows_attach, windows_detach, windows_pid_to_exec_file)
(windows_files_info, windows_create_inferior)
(windows_mourn_inferior, windows_interrupt, windows_kill_inferior)
(windows_close, windows_pid_to_str, windows_xfer_partial)
(windows_get_tib_address, windows_get_ada_task_ptid)
(windows_thread_name, windows_thread_alive): Refactor as
windows_nat_target methods.
(do_initial_windows_stuff): Adjust.
(windows_target): Delete function.
(_initialize_windows_nat): Adjust.
* darwin-nat.c (darwin_resume, darwin_wait_to, darwin_interrupt)
(darwin_mourn_inferior, darwin_kill_inferior)
(darwin_create_inferior, darwin_attach, darwin_detach)
(darwin_pid_to_str, darwin_thread_alive, darwin_xfer_partial)
(darwin_pid_to_exec_file, darwin_get_ada_task_ptid)
(darwin_supports_multi_process): Refactor as darwin_nat_target
methods.
(darwin_resume_to, darwin_files_info): Delete.
(_initialize_darwin_inferior): Rename to ...
(_initialize_darwin_nat): ... this. Adjust to C++ification.
* darwin-nat.h: Include "inf-child.h".
(darwin_nat_target): New class.
(darwin_complete_target): Delete.
* i386-darwin-nat.c (i386_darwin_nat_target): New class.
(darwin_target): New.
(i386_darwin_fetch_inferior_registers)
(i386_darwin_store_inferior_registers): Refactor as methods of
darwin_nat_target.
(darwin_complete_target): Delete, with ...
(_initialize_i386_darwin_nat): ... bits factored out here.
* alpha-linux-nat.c (alpha_linux_nat_target): New class.
(the_alpha_linux_nat_target): New.
(alpha_linux_register_u_offset): Refactor as
alpha_linux_nat_target method.
(_initialize_alpha_linux_nat): Adjust.
* linux-nat-trad.c (inf_ptrace_register_u_offset): Delete.
(inf_ptrace_fetch_register, inf_ptrace_fetch_registers)
(inf_ptrace_store_register, inf_ptrace_store_registers): Refact as
methods of linux_nat_trad_target.
(linux_trad_target): Delete.
* linux-nat-trad.h (linux_trad_target): Delete function.
(linux_nat_trad_target): New class.
* mips-linux-nat.c (mips_linux_nat_target): New class.
(super_fetch_registers, super_store_registers, super_close):
Delete.
(the_mips_linux_nat_target): New.
(mips64_linux_regsets_fetch_registers)
(mips64_linux_regsets_store_registers)
(mips64_linux_fetch_registers, mips64_linux_store_registers)
(mips_linux_register_u_offset, mips_linux_read_description)
(mips_linux_can_use_hw_breakpoint)
(mips_linux_stopped_by_watchpoint)
(mips_linux_stopped_data_address)
(mips_linux_region_ok_for_hw_watchpoint)
(mips_linux_insert_watchpoint, mips_linux_remove_watchpoint)
(mips_linux_close): Refactor as methods of mips_linux_nat.
(_initialize_mips_linux_nat): Adjust to C++ification.
* aix-thread.c (aix_thread_target): New class.
(aix_thread_ops): Now an aix_thread_target.
(aix_thread_detach, aix_thread_resume, aix_thread_wait)
(aix_thread_fetch_registers, aix_thread_store_registers)
(aix_thread_xfer_partial, aix_thread_mourn_inferior)
(aix_thread_thread_alive, aix_thread_pid_to_str)
(aix_thread_extra_thread_info, aix_thread_get_ada_task_ptid):
Refactor as methods of aix_thread_target.
(init_aix_thread_ops): Delete.
(_initialize_aix_thread): Remove references to init_aix_thread_ops
and complete_target_initialization.
* rs6000-nat.c (rs6000_xfer_shared_libraries): Delete.
(rs6000_nat_target): New class.
(the_rs6000_nat_target): New.
(rs6000_fetch_inferior_registers, rs6000_store_inferior_registers)
(rs6000_xfer_partial, rs6000_wait, rs6000_create_inferior)
(rs6000_xfer_shared_libraries): Refactor as rs6000_nat_target methods.
(super_create_inferior): Delete.
(_initialize_rs6000_nat): Adjust to C++ification.
* arm-linux-nat.c (arm_linux_nat_target): New class.
(the_arm_linux_nat_target): New.
(arm_linux_fetch_inferior_registers)
(arm_linux_store_inferior_registers, arm_linux_read_description)
(arm_linux_can_use_hw_breakpoint, arm_linux_insert_hw_breakpoint)
(arm_linux_remove_hw_breakpoint)
(arm_linux_region_ok_for_hw_watchpoint)
(arm_linux_insert_watchpoint, arm_linux_remove_watchpoint)
(arm_linux_stopped_data_address, arm_linux_stopped_by_watchpoint)
(arm_linux_watchpoint_addr_within_range): Refactor as methods of
arm_linux_nat_target.
(_initialize_arm_linux_nat): Adjust to C++ification.
* aarch64-linux-nat.c (aarch64_linux_nat_target): New class.
(the_aarch64_linux_nat_target): New.
(aarch64_linux_fetch_inferior_registers)
(aarch64_linux_store_inferior_registers)
(aarch64_linux_child_post_startup_inferior)
(aarch64_linux_read_description)
(aarch64_linux_can_use_hw_breakpoint)
(aarch64_linux_insert_hw_breakpoint)
(aarch64_linux_remove_hw_breakpoint)
(aarch64_linux_insert_watchpoint, aarch64_linux_remove_watchpoint)
(aarch64_linux_region_ok_for_hw_watchpoint)
(aarch64_linux_stopped_data_address)
(aarch64_linux_stopped_by_watchpoint)
(aarch64_linux_watchpoint_addr_within_range)
(aarch64_linux_can_do_single_step): Refactor as methods of
aarch64_linux_nat_target.
(super_post_startup_inferior): Delete.
(_initialize_aarch64_linux_nat): Adjust to C++ification.
* hppa-linux-nat.c (hppa_linux_nat_target): New class.
(the_hppa_linux_nat_target): New.
(hppa_linux_fetch_inferior_registers)
(hppa_linux_store_inferior_registers): Refactor as methods of
hppa_linux_nat_target.
(_initialize_hppa_linux_nat): Adjust to C++ification.
* ia64-linux-nat.c (ia64_linux_nat_target): New class.
(the_ia64_linux_nat_target): New.
(ia64_linux_insert_watchpoint, ia64_linux_remove_watchpoint)
(ia64_linux_stopped_data_address)
(ia64_linux_stopped_by_watchpoint, ia64_linux_fetch_registers)
(ia64_linux_store_registers, ia64_linux_xfer_partial): Refactor as
ia64_linux_nat_target methods.
(super_xfer_partial): Delete.
(_initialize_ia64_linux_nat): Adjust to C++ification.
* m32r-linux-nat.c (m32r_linux_nat_target): New class.
(the_m32r_linux_nat_target): New.
(m32r_linux_fetch_inferior_registers)
(m32r_linux_store_inferior_registers): Refactor as
m32r_linux_nat_target methods.
(_initialize_m32r_linux_nat): Adjust to C++ification.
* m68k-linux-nat.c (m68k_linux_nat_target): New class.
(the_m68k_linux_nat_target): New.
(m68k_linux_fetch_inferior_registers)
(m68k_linux_store_inferior_registers): Refactor as
m68k_linux_nat_target methods.
(_initialize_m68k_linux_nat): Adjust to C++ification.
* s390-linux-nat.c (s390_linux_nat_target): New class.
(the_s390_linux_nat_target): New.
(s390_linux_fetch_inferior_registers)
(s390_linux_store_inferior_registers, s390_stopped_by_watchpoint)
(s390_insert_watchpoint, s390_remove_watchpoint)
(s390_can_use_hw_breakpoint, s390_insert_hw_breakpoint)
(s390_remove_hw_breakpoint, s390_region_ok_for_hw_watchpoint)
(s390_auxv_parse, s390_read_description): Refactor as methods of
s390_linux_nat_target.
(_initialize_s390_nat): Adjust to C++ification.
* sparc-linux-nat.c (sparc_linux_nat_target): New class.
(the_sparc_linux_nat_target): New.
(_initialize_sparc_linux_nat): Adjust to C++ification.
* sparc-nat.c (sparc_fetch_inferior_registers)
(sparc_store_inferior_registers): Remove target_ops parameter.
* sparc-nat.h (sparc_fetch_inferior_registers)
(sparc_store_inferior_registers): Remove target_ops parameter.
* sparc64-linux-nat.c (sparc64_linux_nat_target): New class.
(the_sparc64_linux_nat_target): New.
(_initialize_sparc64_linux_nat): Adjust to C++ification.
* spu-linux-nat.c (spu_linux_nat_target): New class.
(the_spu_linux_nat_target): New.
(spu_child_post_startup_inferior, spu_child_post_attach)
(spu_child_wait, spu_fetch_inferior_registers)
(spu_store_inferior_registers, spu_xfer_partial)
(spu_can_use_hw_breakpoint): Refactor as spu_linux_nat_target
methods.
(_initialize_spu_nat): Adjust to C++ification.
* tilegx-linux-nat.c (tilegx_linux_nat_target): New class.
(the_tilegx_linux_nat_target): New.
(fetch_inferior_registers, store_inferior_registers):
Refactor as methods.
(_initialize_tile_linux_nat): Adjust to C++ification.
* xtensa-linux-nat.c (xtensa_linux_nat_target): New class.
(the_xtensa_linux_nat_target): New.
(xtensa_linux_fetch_inferior_registers)
(xtensa_linux_store_inferior_registers): Refactor as
xtensa_linux_nat_target methods.
(_initialize_xtensa_linux_nat): Adjust to C++ification.
* fbsd-nat.c (USE_SIGTRAP_SIGINFO): Delete.
(fbsd_pid_to_exec_file, fbsd_find_memory_regions)
(fbsd_find_memory_regions, fbsd_info_proc, fbsd_xfer_partial)
(fbsd_thread_alive, fbsd_pid_to_str, fbsd_thread_name)
(fbsd_update_thread_list, fbsd_resume, fbsd_wait)
(fbsd_stopped_by_sw_breakpoint)
(fbsd_supports_stopped_by_sw_breakpoint, fbsd_follow_fork)
(fbsd_insert_fork_catchpoint, fbsd_remove_fork_catchpoint)
(fbsd_insert_vfork_catchpoint, fbsd_remove_vfork_catchpoint)
(fbsd_post_startup_inferior, fbsd_post_attach)
(fbsd_insert_exec_catchpoint, fbsd_remove_exec_catchpoint)
(fbsd_set_syscall_catchpoint)
(super_xfer_partial, super_resume, super_wait)
(fbsd_supports_stopped_by_hw_breakpoint): Delete.
(fbsd_handle_debug_trap): Remove target_ops parameter.
(fbsd_nat_add_target): Delete.
* fbsd-nat.h: Include "inf-ptrace.h".
(fbsd_nat_add_target): Delete.
(USE_SIGTRAP_SIGINFO): Define.
(fbsd_nat_target): New class.
* amd64-bsd-nat.c (amd64bsd_fetch_inferior_registers)
(amd64bsd_store_inferior_registers): Remove target_ops parameter.
(amd64bsd_target): Delete.
* amd64-bsd-nat.h: New file.
* amd64-fbsd-nat.c: Include "amd64-bsd-nat.h" instead of
"x86-bsd-nat.h".
(amd64_fbsd_nat_target): New class.
(the_amd64_fbsd_nat_target): New.
(amd64fbsd_read_description): Refactor as method of
amd64_fbsd_nat_target.
(amd64_fbsd_nat_target::supports_stopped_by_hw_breakpoint): New.
(_initialize_amd64fbsd_nat): Adjust to C++ification.
* amd64-nat.h (amd64bsd_target): Delete function declaration.
* i386-bsd-nat.c (i386bsd_fetch_inferior_registers)
(i386bsd_store_inferior_registers): Remove target_ops parameter.
(i386bsd_target): Delete.
* i386-bsd-nat.h (i386bsd_target): Delete function declaration.
(i386bsd_fetch_inferior_registers)
(i386bsd_store_inferior_registers): Declare.
(i386_bsd_nat_target): New class.
* i386-fbsd-nat.c (i386_fbsd_nat_target): New class.
(the_i386_fbsd_nat_target): New.
(i386fbsd_resume, i386fbsd_read_description): Refactor as
i386_fbsd_nat_target methods.
(i386_fbsd_nat_target::supports_stopped_by_hw_breakpoint): New.
(_initialize_i386fbsd_nat): Adjust to C++ification.
* x86-bsd-nat.c (super_mourn_inferior): Delete.
(x86bsd_mourn_inferior, x86bsd_target): Delete.
(_initialize_x86_bsd_nat): Adjust to C++ification.
* x86-bsd-nat.h: Include "x86-nat.h".
(x86bsd_target): Delete declaration.
(x86bsd_nat_target): New class.
* aarch64-fbsd-nat.c (aarch64_fbsd_nat_target): New class.
(the_aarch64_fbsd_nat_target): New.
(aarch64_fbsd_fetch_inferior_registers)
(aarch64_fbsd_store_inferior_registers): Refactor as methods of
aarch64_fbsd_nat_target.
(_initialize_aarch64_fbsd_nat): Adjust to C++ification.
* alpha-bsd-nat.c (alpha_bsd_nat_target): New class.
(the_alpha_bsd_nat_target): New.
(alphabsd_fetch_inferior_registers)
(alphabsd_store_inferior_registers): Refactor as
alpha_bsd_nat_target methods.
(_initialize_alphabsd_nat): Refactor as methods of
alpha_bsd_nat_target.
* amd64-nbsd-nat.c: Include "amd64-bsd-nat.h".
(the_amd64_nbsd_nat_target): New.
(_initialize_amd64nbsd_nat): Adjust to C++ification.
* amd64-obsd-nat.c: Include "amd64-bsd-nat.h".
(the_amd64_obsd_nat_target): New.
(_initialize_amd64obsd_nat): Adjust to C++ification.
* arm-fbsd-nat.c (arm_fbsd_nat_target): New.
(the_arm_fbsd_nat_target): New.
(arm_fbsd_fetch_inferior_registers)
(arm_fbsd_store_inferior_registers, arm_fbsd_read_description):
(_initialize_arm_fbsd_nat): Refactor as methods of
arm_fbsd_nat_target.
(_initialize_arm_fbsd_nat): Adjust to C++ification.
* arm-nbsd-nat.c (arm_netbsd_nat_target): New class.
(the_arm_netbsd_nat_target): New.
(armnbsd_fetch_registers, armnbsd_store_registers): Refactor as
arm_netbsd_nat_target.
(_initialize_arm_netbsd_nat): Adjust to C++ification.
* hppa-nbsd-nat.c (hppa_nbsd_nat_target): New class.
(the_hppa_nbsd_nat_target): New.
(hppanbsd_fetch_registers, hppanbsd_store_registers): Refactor as
hppa_nbsd_nat_target methods.
(_initialize_hppanbsd_nat): Adjust to C++ification.
* hppa-obsd-nat.c (hppa_obsd_nat_target): New class.
(the_hppa_obsd_nat_target): New.
(hppaobsd_fetch_registers, hppaobsd_store_registers): Refactor as
methods of hppa_obsd_nat_target.
(_initialize_hppaobsd_nat): Adjust to C++ification. Use
add_target.
* i386-nbsd-nat.c (the_i386_nbsd_nat_target): New.
(_initialize_i386nbsd_nat): Adjust to C++ification. Use
add_target.
* i386-obsd-nat.c (the_i386_obsd_nat_target): New.
(_initialize_i386obsd_nat): Use add_target.
* m68k-bsd-nat.c (m68k_bsd_nat_target): New class.
(the_m68k_bsd_nat_target): New.
(m68kbsd_fetch_inferior_registers)
(m68kbsd_store_inferior_registers): Refactor as methods of
m68k_bsd_nat_target.
(_initialize_m68kbsd_nat): Adjust to C++ification.
* mips-fbsd-nat.c (mips_fbsd_nat_target): New class.
(the_mips_fbsd_nat_target): New.
(mips_fbsd_fetch_inferior_registers)
(mips_fbsd_store_inferior_registers): Refactor as methods of
mips_fbsd_nat_target.
(_initialize_mips_fbsd_nat): Adjust to C++ification. Use
add_target.
* mips-nbsd-nat.c (mips_nbsd_nat_target): New class.
(the_mips_nbsd_nat_target): New.
(mipsnbsd_fetch_inferior_registers)
(mipsnbsd_store_inferior_registers): Refactor as methods of
mips_nbsd_nat_target.
(_initialize_mipsnbsd_nat): Adjust to C++ification.
* mips64-obsd-nat.c (mips64_obsd_nat_target): New class.
(the_mips64_obsd_nat_target): New.
(mips64obsd_fetch_inferior_registers)
(mips64obsd_store_inferior_registers): Refactor as methods of
mips64_obsd_nat_target.
(_initialize_mips64obsd_nat): Adjust to C++ification. Use
add_target.
* nbsd-nat.c (nbsd_pid_to_exec_file): Refactor as method of
nbsd_nat_target.
* nbsd-nat.h: Include "inf-ptrace.h".
(nbsd_nat_target): New class.
* obsd-nat.c (obsd_pid_to_str, obsd_update_thread_list)
(obsd_wait): Refactor as methods of obsd_nat_target.
(obsd_add_target): Delete.
* obsd-nat.h: Include "inf-ptrace.h".
(obsd_nat_target): New class.
* ppc-fbsd-nat.c (ppc_fbsd_nat_target): New class.
(the_ppc_fbsd_nat_target): New.
(ppcfbsd_fetch_inferior_registers)
(ppcfbsd_store_inferior_registers): Refactor as methods of
ppc_fbsd_nat_target.
(_initialize_ppcfbsd_nat): Adjust to C++ification. Use
add_target.
* ppc-nbsd-nat.c (ppc_nbsd_nat_target): New class.
(the_ppc_nbsd_nat_target): New.
(ppcnbsd_fetch_inferior_registers)
(ppcnbsd_store_inferior_registers): Refactor as methods of
ppc_nbsd_nat_target.
(_initialize_ppcnbsd_nat): Adjust to C++ification.
* ppc-obsd-nat.c (ppc_obsd_nat_target): New class.
(the_ppc_obsd_nat_target): New.
(ppcobsd_fetch_registers, ppcobsd_store_registers): Refactor as
methods of ppc_obsd_nat_target.
(_initialize_ppcobsd_nat): Adjust to C++ification. Use
add_target.
* sh-nbsd-nat.c (sh_nbsd_nat_target): New class.
(the_sh_nbsd_nat_target): New.
(shnbsd_fetch_inferior_registers)
(shnbsd_store_inferior_registers): Refactor as methods of
sh_nbsd_nat_target.
(_initialize_shnbsd_nat): Adjust to C++ification.
* sparc-nat.c (sparc_xfer_wcookie): Make extern.
(inf_ptrace_xfer_partial): Delete.
(sparc_xfer_partial, sparc_target): Delete.
* sparc-nat.h (sparc_fetch_inferior_registers)
(sparc_store_inferior_registers, sparc_xfer_wcookie): Declare.
(sparc_target): Delete function declaration.
(sparc_target): New template class.
* sparc-nbsd-nat.c (the_sparc_nbsd_nat_target): New.
(_initialize_sparcnbsd_nat): Adjust to C++ification.
* sparc64-fbsd-nat.c (the_sparc64_fbsd_nat_target): New.
(_initialize_sparc64fbsd_nat): Adjust to C++ification. Use
add_target.
* sparc64-nbsd-nat.c (the_sparc64_nbsd_nat_target): New.
(_initialize_sparc64nbsd_nat): Adjust to C++ification.
* sparc64-obsd-nat.c (the_sparc64_obsd_nat_target): New.
(_initialize_sparc64obsd_nat): Adjust to C++ification. Use
add_target.
* vax-bsd-nat.c (vax_bsd_nat_target): New class.
(the_vax_bsd_nat_target): New.
(vaxbsd_fetch_inferior_registers)
(vaxbsd_store_inferior_registers): Refactor as vax_bsd_nat_target
methods.
(_initialize_vaxbsd_nat): Adjust to C++ification.
* bsd-kvm.c (bsd_kvm_target): New class.
(bsd_kvm_ops): Now a bsd_kvm_target.
(bsd_kvm_open, bsd_kvm_close, bsd_kvm_xfer_partial)
(bsd_kvm_files_info, bsd_kvm_fetch_registers)
(bsd_kvm_thread_alive, bsd_kvm_pid_to_str): Refactor as methods of
bsd_kvm_target.
(bsd_kvm_return_one): Delete.
(bsd_kvm_add_target): Adjust to C++ification.
* nto-procfs.c (nto_procfs_target, nto_procfs_target_native)
(nto_procfs_target_procfs): New classes.
(procfs_open_1, procfs_thread_alive, procfs_update_thread_list)
(procfs_files_info, procfs_pid_to_exec_file, procfs_attach)
(procfs_post_attach, procfs_wait, procfs_fetch_registers)
(procfs_xfer_partial, procfs_detach, procfs_insert_breakpoint)
(procfs_remove_breakpoint, procfs_insert_hw_breakpoint)
(procfs_remove_hw_breakpoint, procfs_resume)
(procfs_mourn_inferior, procfs_create_inferior, procfs_interrupt)
(procfs_kill_inferior, procfs_store_registers)
(procfs_pass_signals, procfs_pid_to_str, procfs_can_run): Refactor
as methods of nto_procfs_target.
(nto_procfs_ops): Now an nto_procfs_target_procfs.
(nto_native_ops): Delete.
(procfs_open, procfs_native_open): Delete.
(nto_native_ops): Now an nto_procfs_target_native.
(init_procfs_targets): Adjust to C++ification.
(procfs_can_use_hw_breakpoint, procfs_remove_hw_watchpoint)
(procfs_insert_hw_watchpoint, procfs_stopped_by_watchpoint):
Refactor as methods of nto_procfs_target.
* go32-nat.c (go32_nat_target): New class.
(the_go32_nat_target): New.
(go32_attach, go32_resume, go32_wait, go32_fetch_registers)
(go32_store_registers, go32_xfer_partial, go32_files_info)
(go32_kill_inferior, go32_create_inferior, go32_mourn_inferior)
(go32_terminal_init, go32_terminal_info, go32_terminal_inferior)
(go32_terminal_ours, go32_pass_ctrlc, go32_thread_alive)
(go32_pid_to_str): Refactor as methods of go32_nat_target.
(go32_target): Delete.
(_initialize_go32_nat): Adjust to C++ification.
* gnu-nat.c (gnu_wait, gnu_resume, gnu_kill_inferior)
(gnu_mourn_inferior, gnu_create_inferior, gnu_attach, gnu_detach)
(gnu_stop, gnu_thread_alive, gnu_xfer_partial)
(gnu_find_memory_regions, gnu_pid_to_str): Refactor as methods of
gnu_nat_target.
(gnu_target): Delete.
* gnu-nat.h (gnu_target): Delete.
(gnu_nat_target): New class.
* i386-gnu-nat.c (gnu_base_target): New.
(i386_gnu_nat_target): New class.
(the_i386_gnu_nat_target): New.
(_initialize_i386gnu_nat): Adjust to C++ification.
gdb/testsuite/ChangeLog:
2018-05-02 Pedro Alves <palves@redhat.com>
* gdb.base/breakpoint-in-ro-region.exp: Adjust to to_resume and
to_log_command renames.
* gdb.base/sss-bp-on-user-bp-2.exp: Likewise.
'g' command returns hex-string as response so simply checking for 'E'
to determine if it failed is not enough and can trigger spurious error
messages. For example, invalid behaviour can be easily triggered on
Cortex-M as follows:
(gdb) set $r0 = 0xe0
Sending packet: $P0=e0000000#72...Packet received: OK
Packet P (set-register) is supported
Sending packet: $g#67...Packet received: E0000000849A0020...
Remote failure reply: E0000000849A0020...
This patch fixes the problem by calling putpkt()/getpkt() directly and
checking result with packet_check_result(). This works fine since Enn
response has odd number of bytes while proper response has even number
of bytes.
Also, remote_send() is now not used anywhere so it can be removed.
gdb/Changelog:
2018-04-26 Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
PR remote/9665
* remote.c (send_g_packet): Use putpkt/getpkt/packet_check_result
instead of remote_send.
(remote_send): Remove.
Since f67c0c9171 ("Enable 'set print inferior-events' and improve
detach/fork/kill/exit messages"), when detaching a remote process, we
get, for detach against a remote target:
(gdb) detach
Detaching from program: ...., process 5388
Ending remote debugging.
[Inferior 1 (Thread 5388.5388) detached]
^^^^^^^^^^^^^^^^
That is incorrect, for it is printing a thread id as string while we
should be printing the process id instead. I.e., either one of:
[Inferior 1 (process 5388) detached]
[Inferior 1 (Remote target) detached]
depending on remote stub support for the multi-process extensions.
Similarly, after killing a process, we're printing thread ids while we
should be printing process ids. E.g., on native GNU/Linux:
(gdb) k
Kill the program being debugged? (y or n) y
[Inferior 1 (Thread 0x7ffff7faa8c0 (LWP 30721)) has been killed]
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
while it should have been:
Kill the program being debugged? (y or n) y
[Inferior 1 (process 30721) has been killed]
^^^^^^^^^^^^^
There's a wording inconsistency between detach and kill:
[Inferior 1 (process 30721) has been killed]
[Inferior 1 (process 30721) detached]
Given we were already saying "detached" instead of "has been
detached", and we used to say just "exited", and given that the "has
been" doesn't really add any information, this commit changes the
message to just "killed":
[Inferior 1 (process 30721) killed]
gdb/ChangeLog:
2018-04-25 Pedro Alves <palves@redhat.com>
* infcmd.c (kill_command): Print the pid as string, not the whole
thread's ptid. Add comment. s/has been killed/killed/ in output
message.
* remote.c (remote_detach_1): Print the pid as string, not the
whole thread's ptid.
gdb/testsuite/ChangeLog:
2018-04-25 Pedro Alves <palves@redhat.com>
* gdb.base/hook-stop.exp: Expect "killed" instead of "has been
killed".
* gdb.base/kill-after-signal.exp: Likewise.
* gdb.threads/kill.exp: Likewise.
This patch aims to turn 'set print inferior-events' always on, and do
some cleanup on the messages printed by GDB when various inferior
events happen (attach, detach, fork, kill, exit).
To make sure that the patch is correct, I've tested it with a handful
of combinations of 'set follow-fork-mode', 'set detach-on-fork' and
'set print inferior-events'. In the end, I decided to make my
hand-made test into an official testcase. More on that below.
Using the following program as an example:
#include <unistd.h>
int main ()
{
fork ();
return 0;
}
We see the following outputs from the patched GDB:
- With 'set print inferior-events on':
(gdb) r
Starting program: a.out
[Detaching after fork from child process 27749]
[Inferior 1 (process 27745) exited normally]
(gdb)
- With 'set print inferior-events off':
(gdb) r
Starting program: a.out
[Inferior 1 (process 27823) exited normally]
(gdb)
Comparing this against an unpatched GDB:
- With 'set print inferior-events off' and 'set follow-fork-mode
child':
(gdb) r
Starting program: a.out
[Inferior 2 (process 5993) exited normally]
(gdb)
Compare this against an unpatched GDB:
(unpatched-gdb) r
Starting program: a.out
[New process 5702]
[Inferior 2 (process 5702) exited normally]
(unpatched-gdb)
It is possible to notice that, in this scenario, the patched GDB
will lose the '[New process %d]' message.
- With 'set print inferior-events on', 'set follow-fork-mode child'
and 'set detach-on-fork on':
(gdb) r
Starting program: a.out
[Attaching after process 27905 fork to child process 27909]
[New inferior 2 (process 27909)]
[Detaching after fork from parent process 27905]
[Inferior 1 (process 27905) detached]
[Inferior 2 (process 27909) exited normally]
(gdb)
Compare this output with an unpatched GDB, using the same settings:
(unpatched-gdb) r
Starting program: a.out
[New inferior 28033]
[Inferior 28029 detached]
[New process 28033]
[Inferior 2 (process 28033) exited normally]
[Inferior 28033 exited]
(unpatched-gdb)
As can be seen above, I've also made a few modifications to messages
that are printed when 'set print inferior-events' is on. For example,
a few of the messages did not contain the '[' and ']' as
prefix/suffix, which led to a few inconsistencies like:
Attaching after process 22995 fork to child process 22999.
[New inferior 22999]
Detaching after fork from child process 22999.
[Inferior 22995 detached]
[Inferior 2 (process 22999) exited normally]
So I took the opportunity and included the square brackets where
applicable. I have also made the existing messages more uniform, by
always printing "Inferior %d (process %d)..." where applicable. This
makes it easier to identify the inferior number and the PID number
from the messages.
As suggested by Pedro, the "[Inferior %d exited]" message from
'exit_inferior' has been removed, because it got duplicated when
'inferior-events' is on. I'm also using the
'add_{thread,inferior}_silent' versions (instead of their verbose
counterparts) on some locations, also to avoid duplicated messages.
For example, a patched GDB with 'set print inferior-events on', 'set
detach-on-fork on' and 'set follow-fork-mode child', but using
'add_thread', would print:
(gdb) run
Starting program: a.out
[Attaching after process 25088 fork to child process 25092.]
[New inferior 25092] <--- duplicated
[Detaching after fork from child process 25092.]
[Inferior 25088 detached]
[New process 25092] <--- duplicated
[Inferior 2 (process 25092) exited normally]
But if we use 'add_thread_silent' (with the same configuration as
before):
(gdb) run
Starting program: a.out
[Attaching after process 31606 fork to child process 31610]
[New inferior 2 (process 31610)]
[Detaching after fork from parent process 31606]
[Inferior 1 (process 31606) detached]
[Inferior 2 (process 31610) exited normally]
As for the tests, the configuration options being exercised are:
- follow-fork-mode: child/parent
- detach-on-fork: on/off
- print inferior-events: on/off
It was also necessary to perform adjustments on several testcases,
because the expected messages changed considerably.
Built and regtested on BuildBot, without regressions.
gdb/ChangeLog:
2018-04-24 Jan Kratochvil <jan.kratochvil@redhat.com>
Sergio Durigan Junior <sergiodj@redhat.com>
Pedro Alves <palves@redhat.com>
* infcmd.c (kill_command): Print message when inferior has
been killed.
* inferior.c (print_inferior_events): Remove 'static'. Set as
'1'.
(add_inferior): Improve message printed when
'print_inferior_events' is on.
(exit_inferior): Remove message printed when
'print_inferior_events' is on.
(detach_inferior): Improve message printed when
'print_inferior_events' is on.
(initialize_inferiors): Use 'add_inferior_silent' to set
'current_inferior_'.
* inferior.h (print_inferior_events): Declare here as
'extern'.
* infrun.c (follow_fork_inferior): Print '[Attaching...]' or
'[Detaching...]' messages when 'print_inferior_events' is on.
Use 'add_thread_silent' instead of 'add_thread'. Add '[' and ']'
as prefix/suffix for messages. Remove periods. Fix erroneous
'Detaching after fork from child...', replace it by '... from
parent...'.
(handle_vfork_child_exec_or_exit): Add '[' and ']' as
prefix/suffix when printing 'Detaching...' messages. Print
them when 'print_inferior_events' is on.
* remote.c (remote_detach_1): Print message when detaching
from inferior and '!is_fork_parent'.
gdb/testsuite/ChangeLog:
2018-04-24 Jan Kratochvil <jan.kratochvil@redhat.com>
Sergio Durigan Junior <sergiodj@redhat.com>
Pedro Alves <palves@redhat.com>
* gdb.base/attach-non-pgrp-leader.exp: Adjust 'Detaching...'
regexps to expect for '[Inferior ... detached]' as well.
* gdb.base/attach.exp: Likewise.
* gdb.base/catch-syscall.exp (check_for_program_end): Adjust
"gdb_continue_to_end".
(test_catch_syscall_with_wrong_args): Likewise.
* gdb.base/foll-fork.exp: Adjust regexps to match '[' and
']'. Don't set 'verbose' on.
* gdb.base/foll-vfork.exp: Likewise.
* gdb.base/fork-print-inferior-events.c: New file.
* gdb.base/fork-print-inferior-events.exp: New file.
* gdb.base/hook-stop.exp: Adjust regexps to expect for new
'[Inferior ... has been killed]' message.
* gdb.base/kill-after-signal.exp: Likewise.
* gdb.base/solib-overlap.exp: Adjust regexps to expect for new
detach message.
* gdb.threads/kill.exp: Adjust regexps to expect for new kill
message.
* gdb.threads/clone-attach-detach.exp: Adjust 'Detaching...'
regexps to expect for '[Inferior ... detached]' as well.
* gdb.threads/process-dies-while-detaching.exp: Likewise.
As Rajendra SY reported at
<https://sourceware.org/ml/gdb-patches/2018-04/msg00399.html>, several
attach-related tests are failing on FreeBSD. The "attach" command
errors with "Couldn't get registers: Device busy".
When the "attach" command is executed, it calls target_attach ->
inf_ptrace_attach, which just does the ptrace(PT_ATTACH), it does not
wait for the child to stop with SIGSTOP. Afterwards, the command is
complete and we go back to the event loop. The event loop wakes up
and we end up in target_wait -> fbsd_wait, and handle the SIGSTOP
stop.
At the end of execute_command, though, before going back to the event
loop, we check if the frame language changed via
check_frame_language_change(). That reads the current PC, which is
what leads to the registers read that fails.
The problem is that we fail to mark the attached-to thread as
executing between the initial attach, and the subsequent target_wait.
Until we see the thread stop with SIGSTOP, we shouldn't try to read
registers off of it. I guess there may a timing issue here - if
you're "lucky", the thread may stop before gdb reads its registers,
masking the problem.
With that fixed, check_frame_language_change() becomes a nop until the
thread is marked not-executing again, after target_wait is called and
we go through handle_inferior_event -> normal_stop.
We haven't seen the problem on Linux because there, the target_attach
implementation waits for the thread to stop before returning. Still,
that's supposedly hidden from the core, since the Linux target, like
most targets, is a '!to_attach_no_wait' target.
This fixes:
FAIL: gdb.base/attach.exp: attach1, after setting file
FAIL: gdb.base/attach.exp: attach2, with no file
FAIL: gdb.base/attach.exp: load file manually, after attach2 (re-read) (got interactive prompt)
FAIL: gdb.base/attach.exp: attach when process' a.out not in cwd
FAIL: gdb.base/dprintf-detach.exp: bai=on ds=gdb dd=on: re-attach to inferior
FAIL: gdb.base/dprintf-detach.exp: bai=on ds=gdb dd=off: re-attach to inferior
FAIL: gdb.base/dprintf-detach.exp: bai=on ds=call dd=on: re-attach to inferior
FAIL: gdb.base/dprintf-detach.exp: bai=on ds=call dd=off: re-attach to inferior
FAIL: gdb.base/dprintf-detach.exp: bai=on ds=agent dd=on: re-attach to inferior
FAIL: gdb.base/dprintf-detach.exp: bai=on ds=agent dd=off: re-attach to inferior
FAIL: gdb.base/dprintf-detach.exp: bai=off ds=gdb dd=on: re-attach to inferior
FAIL: gdb.base/dprintf-detach.exp: bai=off ds=gdb dd=off: re-attach to inferior
FAIL: gdb.base/dprintf-detach.exp: bai=off ds=call dd=on: re-attach to inferior
FAIL: gdb.base/dprintf-detach.exp: bai=off ds=call dd=off: re-attach to inferior
FAIL: gdb.base/dprintf-detach.exp: bai=off ds=agent dd=on: re-attach to inferior
FAIL: gdb.base/dprintf-detach.exp: bai=off ds=agent dd=off: re-attach to inferior
gdb/ChangeLog:
2018-04-21 Pedro Alves <palves@redhat.com>
Rajendra SY <rajendra.sy@gmail.com>
* inf-ptrace.c (inf_ptrace_attach): Mark the thread as executing.
* remote.c (extended_remote_attach): In all-stop mode, mark the
thread as executing.
A future patch will propose making the remote target's target_ops be
heap-allocated (to make it possible to have multiple instances of
remote targets, for multiple simultaneous connections), and will
delete/destroy the remote target at target_close time.
That change trips on a latent problem, though. File I/O handles
remain open even after the target is gone, with a dangling pointer to
a target that no longer exists. This results in GDB crashing when it
calls the target_ops backend associated with the file handle:
(gdb) Disconnect
Ending remote debugging.
* GDB crashes deferencing a dangling pointer
Backtrace:
#0 0x00007f79338570a0 in main_arena () at /lib64/libc.so.6
#1 0x0000000000858bfe in target_fileio_close(int, int*) (fd=1, target_errno=0x7ffe0499a4c8)
at src/gdb/target.c:2980
#2 0x00000000007088bd in gdb_bfd_iovec_fileio_close(bfd*, void*) (abfd=0x1a631b0, stream=0x223c9d0)
at src/gdb/gdb_bfd.c:353
#3 0x0000000000930906 in opncls_bclose (abfd=0x1a631b0) at src/bfd/opncls.c:528
#4 0x0000000000930cf9 in bfd_close_all_done (abfd=0x1a631b0) at src/bfd/opncls.c:768
#5 0x0000000000930cb3 in bfd_close (abfd=0x1a631b0) at src/bfd/opncls.c:735
#6 0x0000000000708dc5 in gdb_bfd_close_or_warn(bfd*) (abfd=0x1a631b0) at src/gdb/gdb_bfd.c:511
#7 0x00000000007091a2 in gdb_bfd_unref(bfd*) (abfd=0x1a631b0) at src/gdb/gdb_bfd.c:615
#8 0x000000000079ed8e in objfile::~objfile() (this=0x2154730, __in_chrg=<optimized out>)
at src/gdb/objfiles.c:682
#9 0x000000000079fd1a in objfile_purge_solibs() () at src/gdb/objfiles.c:1065
#10 0x00000000008162ca in no_shared_libraries(char const*, int) (ignored=0x0, from_tty=1)
at src/gdb/solib.c:1251
#11 0x000000000073b89b in disconnect_command(char const*, int) (args=0x0, from_tty=1)
at src/gdb/infcmd.c:3035
This goes unnoticed in current master, because the current remote
target's target_ops is never destroyed nowadays, so we end up calling:
remote_hostio_close -> remote_hostio_send_command
which gracefully fails with FILEIO_ENOSYS if remote_desc is NULL
(because the target is closed).
Fix this by invalidating a target's file I/O handles when the target
is closed.
With this change, remote_hostio_send_command no longer needs to handle the
case of being called with a closed remote target, originally added here:
<https://sourceware.org/ml/gdb-patches/2008-08/msg00359.html>.
gdb/ChangeLog:
2018-04-11 Pedro Alves <palves@redhat.com>
* target.c (fileio_fh_t::t): Add comment.
(target_fileio_pwrite, target_fileio_pread, target_fileio_fstat)
(target_fileio_close): Handle a NULL target.
(invalidate_fileio_fh): New.
(target_close): Call it.
* remote.c (remote_hostio_send_command): No longer check whether
remote_desc is open.
This patch removes VEC(tsv_s), using an std::vector instead. I C++ified
trace_state_variable a bit in the process, using std::string for the
name. I also thought it would be nicer to pass a const reference to
target_download_trace_state_variable, since we know it will never be
NULL. This highlighted that the make-target-delegates script didn't
handle references well, so I adjusted this as well. It will surely be
useful in the future.
gdb/ChangeLog:
* tracepoint.h (struct trace_state_variable): Add constructor.
<name>: Change type to std::string.
* tracepoint.c (tsv_s): Remove.
(DEF_VEC_O(tsv_s)): Remove.
(tvariables): Change to std::vector.
(create_trace_state_variable): Adjust to std::vector.
(find_trace_state_variable): Likewise.
(find_trace_state_variable_by_number): Likewise.
(delete_trace_state_variable): Likewise.
(trace_variable_command): Adjust to std::string.
(delete_trace_variable_command): Likewise.
(tvariables_info_1): Adjust to std::vector.
(save_trace_state_variables): Likewise.
(start_tracing): Likewise.
(merge_uploaded_trace_state_variables): Adjust to std::vector
and std::string.
* target.h (struct target_ops)
<to_download_trace_state_variable>: Pass reference to
trace_state_variable.
* target-debug.h (target_debug_print_const_trace_state_variable_r): New.
* target-delegates.c: Re-generate.
* mi/mi-interp.c (mi_tsv_created): Adjust to std::string.
(mi_tsv_deleted): Likewise.
* mi/mi-main.c (mi_cmd_trace_frame_collected): Likewise.
* remote.c (remote_download_trace_state_variable): Change
pointer to reference and adjust.
* make-target-delegates (parse_argtypes): Handle references.
(write_function_header): Likewise.
(munge_type): Likewise.
This patch started by changing target_read_alloc_1 to return a
byte_vector, to avoid manual memory management (in target_read_alloc_1
and in the callers). To communicate failures to the callers, it
actually returns a gdb::optional<gdb::byte_vector>.
Adjusting target_read_stralloc was a bit more tricky, since it wants to
return a buffer of char, and not gdb_byte. Since you can't just cast a
gdb::byte_vector into a gdb::def_vector<char>, I made
target_read_alloc_1 templated, so both versions (that return vectors of
gdb_byte and char) are generated. Since target_read_stralloc now
returns a gdb::char_vector instead of a gdb::unique_xmalloc_ptr<char>, a
few callers need to be adjusted.
gdb/ChangeLog:
* common/byte-vector.h (char_vector): New type.
* target.h (target_read_alloc): Return
gdb::optional<byte_vector>.
(target_read_stralloc): Return gdb::optional<char_vector>.
(target_get_osdata): Return gdb::optional<char_vector>.
* target.c (target_read_alloc_1): Templatize. Replacement
manual memory management with vector.
(target_read_alloc): Change return type, adjust.
(target_read_stralloc): Change return type, adjust.
(target_get_osdata): Change return type, adjust.
* auxv.c (struct auxv_info) <length>: Remove.
<data>: Change type to gdb::optional<byte_vector>.
(auxv_inferior_data_cleanup): Free auxv_info with delete.
(get_auxv_inferior_data): Allocate auxv_info with new, adjust.
(target_auxv_search): Adjust.
(fprint_target_auxv): Adjust.
* avr-tdep.c (avr_io_reg_read_command): Adjust.
* linux-tdep.c (linux_spu_make_corefile_notes): Adjust.
(linux_make_corefile_notes): Adjust.
* osdata.c (get_osdata): Adjust.
* remote.c (remote_get_threads_with_qxfer): Adjust.
(remote_memory_map): Adjust.
(remote_traceframe_info): Adjust.
(btrace_read_config): Adjust.
(remote_read_btrace): Adjust.
(remote_pid_to_exec_file): Adjust.
* solib-aix.c (solib_aix_get_library_list): Adjust.
* solib-dsbt.c (decode_loadmap): Don't free buf.
(dsbt_get_initial_loadmaps): Adjust.
* solib-svr4.c (svr4_current_sos_via_xfer_libraries): Adjust.
* solib-target.c (solib_target_current_sos): Adjust.
* tracepoint.c (sdata_make_value): Adjust.
* xml-support.c (xinclude_start_include): Adjust.
(xml_fetch_content_from_file): Adjust.
* xml-support.h (xml_fetch_another): Change return type.
(xml_fetch_content_from_file): Change return type.
* xml-syscall.c (xml_init_syscalls_info): Adjust.
* xml-tdesc.c (file_read_description_xml): Adjust.
(fetch_available_features_from_target): Change return type.
(target_fetch_description_xml): Adjust.
(target_read_description_xml): Adjust.
This patch replaces VEC(static_tracepoint_marker_p) with std::vector,
and does some c++ification around that. I thought a new overload of
hex2str was useful, so I added it as well as corresponding unit tests.
I also added an overload of ui_out::field_string that takes an
std::string directly.
gdb/ChangeLog:
* tracepoint.h (struct static_tracepoint_marker): Initialize
fields, define default constructor, move constructor and move
assignment, disable the rest.
<str_id, extra>: Make std::string.
(release_static_tracepoint_marker): Remove.
(free_current_marker): Remove.
* tracepoint.c (free_current_marker): Remove.
(parse_static_tracepoint_marker_definition): Adjust to
std::string, use new hex2str overload.
(release_static_tracepoint_marker): Remove.
(print_one_static_tracepoint_marker): Get marker by reference
and adjust to std::string.
(info_static_tracepoint_markers_command): Adjust to std::vector
changes
* target.h (static_tracepoint_marker_p): Remove typedef.
(DEF_VEC_P(static_tracepoint_marker_p)): Remove.
(struct target_ops) <to_static_tracepoint_marker_at>: Return
bool.
<to_static_tracepoint_markers_by_strid>: Return std::vector.
* target-debug.h
(target_debug_print_VEC_static_tracepoint_marker_p_p): Remove.
(target_debug_print_std_vector_static_tracepoint_marker): New.
(target_debug_print_struct_static_tracepoint_marker_p): Rename
to...
(target_debug_print_static_tracepoint_marker_p): ... this.
* target-delegates.c: Re-generate.
* breakpoint.h (struct tracepoint) <static_trace_marker_id>:
Make std::string.
* breakpoint.c (init_breakpoint_sal): Adjust to std::string.
(decode_static_tracepoint_spec): Adjust to std::vector.
(tracepoint_print_one_detail): Adjust to std::string.
(strace_marker_decode_location): Adjust to std::string.
(update_static_tracepoint): Adjust to std::string, remove call
to release_static_tracepoint_marker.
* linux-nat.c (linux_child_static_tracepoint_markers_by_strid):
Adjust to std::vector.
* remote.c (remote_static_tracepoint_marker_at): Return bool.
(remote_static_tracepoint_markers_by_strid): Adjust to
std::vector.
* common/rsp-low.h (hex2str): New overload with explicit count
of bytes.
* common/rsp-low.c (hex2str): New overload with explicit count
of bytes.
* unittests/rsp-low-selftests.c (test_hex2str): New function.
(_initialize_rsp_low_selftests): Add test_hex2str test.
* unittests/tracepoint-selftests.c
(test_parse_static_tracepoint_marker_definition): Adjust to
std::string.
This converts observers from using a special source-generating script
to be plain C++. This version of the patch takes advantage of C++11
by using std::function and variadic templates; incorporates Pedro's
patches; and renames the header file to "observable.h" (this change
eliminates the need for a clean rebuild).
Note that Pedro's patches used a template lambda in tui-hooks.c, but
this failed to compile on some buildbot instances (presumably due to
differing C++ versions); I replaced this with an ordinary template
function.
Regression tested on the buildbot.
gdb/ChangeLog
2018-03-19 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
* unittests/observable-selftests.c: New file.
* common/observable.h: New file.
* observable.h: New file.
* ada-lang.c, ada-tasks.c, agent.c, aix-thread.c, annotate.c,
arm-tdep.c, auto-load.c, auxv.c, break-catch-syscall.c,
breakpoint.c, bsd-uthread.c, cli/cli-interp.c, cli/cli-setshow.c,
corefile.c, dummy-frame.c, event-loop.c, event-top.c, exec.c,
extension.c, frame.c, gdbarch.c, guile/scm-breakpoint.c,
infcall.c, infcmd.c, inferior.c, inflow.c, infrun.c, jit.c,
linux-tdep.c, linux-thread-db.c, m68klinux-tdep.c,
mi/mi-cmd-break.c, mi/mi-interp.c, mi/mi-main.c, objfiles.c,
ppc-linux-nat.c, ppc-linux-tdep.c, printcmd.c, procfs.c,
python/py-breakpoint.c, python/py-finishbreakpoint.c,
python/py-inferior.c, python/py-unwind.c, ravenscar-thread.c,
record-btrace.c, record-full.c, record.c, regcache.c, remote.c,
riscv-tdep.c, sol-thread.c, solib-aix.c, solib-spu.c, solib.c,
spu-multiarch.c, spu-tdep.c, stack.c, symfile-mem.c, symfile.c,
symtab.c, thread.c, top.c, tracepoint.c, tui/tui-hooks.c,
tui/tui-interp.c, valops.c: Update all users.
* tui/tui-hooks.c (tui_bp_created_observer)
(tui_bp_deleted_observer, tui_bp_modified_observer)
(tui_inferior_exit_observer, tui_before_prompt_observer)
(tui_normal_stop_observer, tui_register_changed_observer):
Remove.
(tui_observers_token): New global.
(attach_or_detach, tui_attach_detach_observers): New functions.
(tui_install_hooks, tui_remove_hooks): Use
tui_attach_detach_observers.
* record-btrace.c (record_btrace_thread_observer): Remove.
(record_btrace_thread_observer_token): New global.
* observer.sh: Remove.
* observer.c: Rename to observable.c.
* observable.c (namespace gdb_observers): Define new objects.
(observer_debug): Move into gdb_observers namespace.
(struct observer, struct observer_list, xalloc_observer_list_node)
(xfree_observer_list_node, generic_observer_attach)
(generic_observer_detach, generic_observer_notify): Remove.
(_initialize_observer): Update.
Don't include observer.inc.
* Makefile.in (generated_files): Remove observer.h, observer.inc.
(clean mostlyclean): Likewise.
(observer.h, observer.inc): Remove targets.
(SUBDIR_UNITTESTS_SRCS): Add observable-selftests.c.
(COMMON_SFILES): Use observable.c, not observer.c.
* .gitignore: Remove observer.h.
gdb/doc/ChangeLog
2018-03-19 Tom Tromey <tom@tromey.com>
* observer.texi: Remove.
gdb/testsuite/ChangeLog
2018-03-19 Tom Tromey <tom@tromey.com>
* gdb.gdb/observer.exp: Remove.
In remote.c, when the output of "set debug remote" is truncated, the
number of characters reported is incorrect. What is reported is the
number of characters added by the quoting, not the number of characters
that were truncated.
gdb/ChangeLog:
* remote.c (putpkt_binary): Fix omitted bytes reporting.
(getpkt_or_notif_sane_1): Likewise.
This changes to_fileio_readlink and target_fileio_readlink to return a
gdb::optional<std::sring>, and then fixes up the callers and
implementations. This allows the removal of some cleanups.
Regression tested by the buildbot.
gdb/ChangeLog
2018-03-07 Tom Tromey <tom@tromey.com>
* linux-tdep.c (linux_info_proc): Update.
* target.h (struct target_ops) <to_fileio_readlink>: Return
optional<string>.
(target_fileio_readlink): Return optional<string>.
* remote.c (remote_hostio_readlink): Return optional<string>.
* inf-child.c (inf_child_fileio_readlink): Return
optional<string>.
* target.c (target_fileio_readlink): Return optional<string>.
Remove the to_supports_btrace target method and instead rely on detecting errors
when trying to enable recording. This will also provide a suitable error
message explaining why recording is not possible.
For remote debugging, gdbserver will now always advertise branch tracing related
packets. When talking to an older GDB, this will cause GDB to try to enable
branch tracing and gdbserver to report a suitable error message every time.
An older gdbserver will not advertise branch tracing related packets if the
one-time check failed, so a newer GDB with this patch will fail to enable branch
tracing at remote_enable_btrace() rather than at btrace_enable(). The error
message is the same in both cases so there should be no user-visible change.
gdb/
* btrace.c (btrace_enable): Remove target_supports_btrace call.
* nat/linux-btrace.c (perf_event_pt_event_type): Move.
(kernel_supports_bts, kernel_supports_pt, linux_supports_bts)
(linux_supports_pt, linux_supports_btrace): Remove.
(linux_enable_bts): Call cpu_supports_bts.
* nat/linux-btrace.h (linux_supports_btrace): Remove.
* remote.c (remote_supports_btrace): Remove.
(init_remote_ops): Remove remote_supports_btrace.
* target-delegates.c: Regenerated.
* target.c (target_supports_btrace): Remove.
* target.h (target_ops) <to_supports_btrace>: Remove
(target_supports_btrace): Remove.
* x86-linux-nat.c (x86_linux_create_target): Remove
linux_supports_btrace.
gdbserver/
* linux-low.c (linux_target_ops): Remove linux_supports_btrace.
* nto-low.c (nto_target_ops): Remove NULL for supports_btrace.
* spu-low.c (spu_target_ops): Likewise.
* win32-low.c (win32_target_ops): Likewise.
* server.c (supported_btrace_packets): Report packets unconditionally.
* target.h (target_ops) <supports_btrace>: Remove.
(target_supports_btrace): Remove.
In my multi-target branch I ran into problems with GDB's terminal
handling that exist in master as well, with multi-inferior debugging.
This patch adds a testcase for said problems
(gdb.multi/multi-term-settings.exp), fixes the problems, fixes PR
gdb/13211 as well (and adds a testcase for that too,
gdb.base/interrupt-daemon.exp).
The basis of the problem I ran into is the following. Consider a
scenario where you have:
- inferior 1 - started with "attach", process is running on some
other terminal.
- inferior 2 - started with "run", process is sharing gdb's terminal.
In this scenario, when you stop/resume both inferiors, you want GDB to
save/restore the terminal settings of inferior 2, the one that is
sharing GDB's terminal. I.e., you want inferior 2 to "own" the
terminal (in target_terminal::is_ours/target_terminal::is_inferior
sense).
Unfortunately, that's not what you get currently. Because GDB doesn't
know whether an attached inferior is actually sharing GDB's terminal,
it tries to save/restore its settings anyway, ignoring errors. In
this case, this is pointless, because inferior 1 is running on a
different terminal, but GDB doesn't know better.
And then, because it is only possible to have the terminal settings of
a single inferior be in effect at a time, or make one inferior/pgrp be
the terminal's foreground pgrp (aka, only one inferior can "own" the
terminal, ignoring fork children here), if GDB happens to try to
restore the terminal settings of inferior 1 first, then GDB never
restores the terminal settings of inferior 2.
This patch fixes that and a few things more along the way:
- Moves enum target_terminal::terminal_state out of the
target_terminal class (it's currently private) and makes it a
scoped enum so that it can be easily used elsewhere.
- Replaces the inflow.c:terminal_is_ours boolean with a
target_terminal_state variable. This allows distinguishing is_ours
and is_ours_for_output states. This allows finally making
child_terminal_ours_1 do something with its "output_only"
parameter.
- Makes each inferior have its own copy of the
is_ours/is_ours_for_output/is_inferior state.
- Adds a way for GDB to tell whether the inferior is sharing GDB's
terminal. Works best on Linux and Solaris; the fallback works just
as well as currently.
- With that, we can remove the inf->attach_flag tests from
child_terminal_inferior/child_terminal_ours.
- Currently target_ops.to_ours is responsible for both saving the
current inferior's terminal state, and restoring gdb's state.
Because each inferior has its own terminal state (possibly handled
by different targets in a multi-target world, even), we need to
split the inferior-saving part from the gdb-restoring part. The
patch adds a new target_ops.to_save_inferior target method for
that.
- Adds a new target_terminal::save_inferior() function, so that
sequences like:
scoped_restore_terminal_state save_state;
target_terminal::ours_for_output ();
... restore back inferiors that were
target_terminal_state::is_inferior before back to is_inferior, and
leaves inferiors that were is_ours alone.
- Along the way, this adds a default implementation of
target_pass_ctrlc to inflow.c (for inf-child.c), that handles
passing the Ctrl-C to a process running on GDB's terminal or to
some other process otherwise.
- Similarly, adds a new target default implementation of
target_interrupt, for the "interrupt" command. The current
implementation of this hook in inf-ptrace.c kills the whole process
group, but that's incorrect/undesirable because we may not be
attached to all processes in the process group. And also, it's
incorrect because inferior_process_group() doesn't really return
the inferior's real process group id if the inferior is not a
process group leader... This is the cause of PR gdb/13211 [1],
which this patch fixes. While at it, that target method's "ptid"
parameter is eliminated, because it's not really used.
- A new test is included that exercises and fixes PR gdb/13211, and
also fixes a GDB issue reported on stackoverflow that I ran into
while working on this [2]. The problem is similar to PR gdb/13211,
except that it also triggers with Ctrl-C. When debugging a daemon
(i.e., a process that disconnects from the controlling terminal and
is not a process group leader, then Ctrl-C doesn't work, you just
can't interrupt the inferior at all, resulting in a hung debug
session. The problem is that since the inferior is no longer
associated with gdb's session / controlling terminal, then trying
to put the inferior in the foreground fails. And so Ctrl-C never
reaches the inferior directly. pass_signal is only used when the
inferior is attached, but that is not the case here. This is fixed
by the new child_pass_ctrlc. Without the fix, the new
interrupt-daemon.exp testcase fails with timeout waiting for a
SIGINT that never arrives.
[1] PR gdb/13211 - Async / Process group and interrupt not working
https://sourceware.org/bugzilla/show_bug.cgi?id=13211
[2] GDB not reacting Ctrl-C when after fork() and setsid()
https://stackoverflow.com/questions/46101292/gdb-not-reacting-ctrl-c-when-after-fork-and-setsid
Note this patch does _not_ fix:
- PR gdb/14559 - The 'interrupt' command does not work if sigwait is in use
https://sourceware.org/bugzilla/show_bug.cgi?id=14559
- PR gdb/9425 - When using "sigwait" GDB doesn't trap SIGINT. Ctrl+C terminates program when should break gdb.
https://sourceware.org/bugzilla/show_bug.cgi?id=9425
The only way to fix that that I know of (without changing the kernel)
is to make GDB put inferiors in a separate session (create a
pseudo-tty master/slave pair, make the inferior run with the slave as
its terminal, and have gdb pump output/input on the master end).
gdb/ChangeLog:
2018-01-30 Pedro Alves <palves@redhat.com>
PR gdb/13211
* config.in, configure: Regenerate.
* configure.ac: Check for getpgid.
* go32-nat.c (go32_pass_ctrlc): New.
(go32_target): Install it.
* inf-child.c (inf_child_target): Install
child_terminal_save_inferior, child_pass_ctrlc and
child_interrupt.
* inf-ptrace.c (inf_ptrace_interrupt): Delete.
(inf_ptrace_target): No longer install it.
* infcmd.c (interrupt_target_1): Adjust.
* inferior.h (child_terminal_save_inferior, child_pass_ctrlc)
(child_interrupt): Declare.
(inferior::terminal_state): New.
* inflow.c (struct terminal_info): Update comments.
(inferior_process_group): Delete.
(terminal_is_ours): Delete.
(gdb_tty_state): New.
(child_terminal_init): Adjust.
(is_gdb_terminal, sharing_input_terminal_1)
(sharing_input_terminal): New functions.
(child_terminal_inferior): Adjust. Use sharing_input_terminal.
Set the process's actual process group in the foreground if
possible. Handle is_ours_for_output/is_ours distinction. Don't
mark terminal as the inferior's if not sharing GDB's terminal.
Don't check attach_flag.
(child_terminal_ours_for_output, child_terminal_ours): Adjust to
pass down a target_terminal_state.
(child_terminal_save_inferior): New, factored out from ...
(child_terminal_ours_1): ... this. Handle
target_terminal_state::is_ours_for_output.
(child_interrupt, child_pass_ctrlc): New.
(inflow_inferior_exit): Clear the inferior's terminal_state.
(copy_terminal_info): Copy the inferior's terminal state.
(_initialize_inflow): Remove reference to terminal_is_ours.
* inflow.h (inferior_process_group): Delete.
* nto-procfs.c (nto_handle_sigint, procfs_interrupt): Adjust.
* procfs.c (procfs_target): Don't install procfs_interrupt.
(procfs_interrupt): Delete.
* remote.c (remote_serial_quit_handler): Adjust.
(remote_interrupt): Remove ptid parameter. Adjust.
* target-delegates.c: Regenerate.
* target.c: Include "terminal.h".
(target_terminal::terminal_state): Rename to ...
(target_terminal::m_terminal_state): ... this.
(target_terminal::init): Adjust.
(target_terminal::inferior): Adjust to per-inferior
terminal_state.
(target_terminal::restore_inferior, target_terminal_is_ours_kind): New.
(target_terminal::ours, target_terminal::ours_for_output): Use
target_terminal_is_ours_kind.
(target_interrupt): Remove ptid parameter. Adjust.
(default_target_pass_ctrlc): Adjust.
* target.h (target_ops::to_terminal_save_inferior): New field.
(target_ops::to_interrupt): Remove ptid_t parameter.
(target_interrupt): Remove ptid_t parameter. Update comment.
(target_pass_ctrlc): Update comment.
* target/target.h (target_terminal_state): New scoped enum,
factored out of ...
(target_terminal::terminal_state): ... here.
(target_terminal::inferior): Update comments.
(target_terminal::restore_inferior): New.
(target_terminal::is_inferior, target_terminal::is_ours)
(target_terminal::is_ours_for_output): Adjust.
(target_terminal::scoped_restore_terminal_state): Adjust to
rename, and call restore_inferior() instead of inferior().
(target_terminal::scoped_restore_terminal_state::m_state): Change
type.
(target_terminal::terminal_state): Rename to ...
(target_terminal::m_terminal_state): ... this and change type.
gdb/gdbserver/ChangeLog:
2018-01-30 Pedro Alves <palves@redhat.com>
PR gdb/13211
* target.c (target_terminal::terminal_state): Rename to ...
(target_terminal::m_terminal_state): ... this.
gdb/testsuite/ChangeLog:
2018-01-30 Pedro Alves <palves@redhat.com>
PR gdb/13211
* gdb.base/interrupt-daemon.c: New.
* gdb.base/interrupt-daemon.exp: New.
* gdb.multi/multi-term-settings.c: New.
* gdb.multi/multi-term-settings.exp: New.
This patch fixes a regression that has been introduced by:
commit bc09b0c14f
Date: Fri Jan 19 11:48:11 2018 -0500
Make linux_nat_detach/thread_db_detach use the inferior parameter
It is possible to trigger this failure with gdb.base/foll-fork.exp (in
which case a bunch of ERROR's will be printed), but one can also use
the test below.
Consider the following example program:
#include <unistd.h>
int
main (int argc, char *argv[])
{
fork ();
return 0;
}
When running it under gdbserver:
# ./gdb/gdbserver/gdbserver --multi --once :2345
And debugging it under GDB, we see a segmentation fault:
# ./gdb/gdb -q -batch -ex 'set remote exec-file ./a.out' -ex 'tar extended-remote :2345' -ex r ./a.out
Starting program:
...
[Detaching after fork from child process 16102.]
Segmentation fault (core dumped)
The problem happens on inferior.c:detach_inferior:
void
detach_inferior (inferior *inf)
{
/* Save the pid, since exit_inferior_1 will reset it. */
int pid = inf->pid;
^^^^^^^^^
exit_inferior_1 (inf, 0);
if (print_inferior_events)
printf_unfiltered (_("[Inferior %d detached]\n"), pid);
}
When this code is called from remote.c:remote_follow_fork, the PID is
valid but there is no 'inferior' associated with it, which means that
'inf == NULL'.
The proper fix here is to not call "detach_inferior" when doing remote
follow-fork, because we don't have an inferior to detach on the host
side.
Before bc09b0c1, that call was already a nop (exit_inferior_1 bails
out early if you pass it a NULL inferior), except that it printed
"Inferior PID detached" when "set print inferior-events" is on. Since
native debugging doesn't call detach_inferior in this case, removing
the call from remote aligns remote debugging output with native
debugging output further.
This has been regtested using BuildBot and no regressions were found.
gdb/ChangeLog:
2018-01-29 Sergio Durigan Junior <sergiodj@redhat.com>
* remote.c (remote_follow_fork): Don't call "detach_inferior".
The to_detach target_ops method implementations are currently expected
to work on current_inferior/inferior_ptid. In order to make things more
explicit, and remove some "shadow" parameter passing through globals,
this patch adds an "inferior" parameter to to_detach. Implementations
will be expected to use this instead of relying on the global. However,
to keep things simple, this patch only does the minimum that is
necessary to add the parameter. The following patch gives an example of
how one such implementation would be adapted. If the approach is deemed
good, we can then look into adapting more implementations. Until then,
they'll continue to work as they do currently.
gdb/ChangeLog:
* target.h (struct target_ops) <to_detach>: Add inferior
parameter.
(target_detach): Likewise.
* target.c (dispose_inferior): Pass inferior down.
(target_detach): Pass inferior down. Assert that it is equal to
the current inferior.
* aix-thread.c (aix_thread_detach): Pass inferior down.
* corefile.c (core_file_command): Pass current_inferior() down.
* corelow.c (core_detach): Add inferior parameter.
* darwin-nat.c (darwin_detach): Likewise.
* gnu-nat.c (gnu_detach): Likewise.
* inf-ptrace.c (inf_ptrace_detach): Likewise.
* infcmd.c (detach_command): Pass current_inferior() down to
target_detach.
* infrun.c (follow_fork_inferior): Pass parent_inf to
target_detach.
(handle_vfork_child_exec_or_exit): Pass inf->vfork_parent to
target_detach.
* linux-nat.c (linux_nat_detach): Add inferior parameter.
* linux-thread-db.c (thread_db_detach): Likewise.
* nto-procfs.c (procfs_detach): Likewise.
* procfs.c (procfs_detach): Likewise.
* record.c (record_detach): Likewise.
* record.h (struct inferior): Forward-declare.
(record_detach): Add inferior parameter.
* remote-sim.c (gdbsim_detach): Likewise.
* remote.c (remote_detach_1): Likewise.
(remote_detach): Likewise.
(extended_remote_detach): Likewise.
* sol-thread.c (sol_thread_detach): Likewise.
* target-debug.h (target_debug_print_inferior_p): New macro.
* target-delegates.c: Re-generate.
* top.c (kill_or_detach): Pass inferior down to target_detach.
* windows-nat.c (windows_detach): Add inferior parameter.
I was looking into adding a parameter to target_detach, and was
wondering what the args parameter was. It seems like in the distant
past, it was possible to specify a signal number when detaching. That
signal was injected in the process before it was detached. There is an
example of code handling this in linux_nat_detach. With today's GDB, I
can't get this to work. Doing "detach 15" (15 == SIGTERM) doesn't work,
because detach is a prefix command and doesn't recognize the sub-command
15. Doing "detach inferiors 15" doesn't work because it expects a list
of inferior id to detach. Therefore, I don't think there's a way of
invoking detach_command with a non-NULL args. I also didn't find any
documentation related to this feature.
I assume that this feature stopped working when detach was made a prefix
command, which is in f73adfeb8b (sorry,
there's no commit title) from 2006. Given that this feature was broken
for such a long time and we haven't heard anything (AFAIK, I did not
find any related bug), I think it's safe to remove it, as well as the
args parameter to target_detach. If someone wants to re-introduce it, I
would suggest rethinking the user interface, and in particular would
suggest using signal name instead of numbers.
I tried to fix all the impacted code, but I might have forgotten some
spots. It shouldn't be hard to fix if that's the case. I also couldn't
build-test everything I changed, especially the nto and solaris stuff.
gdb/ChangeLog:
* target.h (struct target_ops) <to_detach>: Remove args
parameter.
(target_detach): Likewise.
* target.c (dispose_inferior): Adjust.
(target_detach): Remove args parameter, adjust.
* aix-thread.c (aix_thread_detach): Adjust.
* corefile.c (core_file_command): Adjust.
* corelow.c (core_detach): Adjust.
* darwin-nat.c (darwin_detach): Adjust.
* gnu-nat.c (gnu_detach): Adjust.
* inf-ptrace.c (inf_ptrace_detach): Adjust.
* infcmd.c (detach_command): Adjust
* infrun.c (follow_fork_inferior): Adjust.
(handle_vfork_child_exec_or_exit): Adjust.
* linux-fork.c (linux_fork_detach): Remove args parameter.
* linux-fork.h (linux_fork_detach): Likewise.
* linux-nat.c (linux_nat_detach): Likewise, and adjust.
* linux-thread-db.c (thread_db_detach): Likewise.
* nto-procfs.c (procfs_detach): Likewise.
* procfs.c (procfs_detach): Likewise.
(do_detach): Remove signo parameter.
* record.c (record_detach): Remove args parameter.
* record.h (record_detach): Likewise.
* remote-sim.c (gdbsim_detach): Likewise.
* remote.c (remote_detach_1): Likewise.
(remote_detach): Likewise.
(extended_remote_detach): Likewise.
* sol-thread.c (sol_thread_detach): Likewise.
* target-delegates.c: Re-generate.
* top.c (struct qt_args) <args>: Remove field.
(kill_or_detach): Don't pass args.
(quit_force): Don't set args.
* windows-nat.c (windows_detach): Remove args parameter.
At <https://sourceware.org/ml/gdb-patches/2017-12/msg00285.html>,
Maciej reported that commit:
commit 5cd63fda03
Date: Wed Oct 4 18:21:10 2017 +0100
Subject: Fix "Remote 'g' packet reply is too long" problems with multiple inferiors
made GDB stop working with older stubs. Any attempt to continue
execution after the initial connection fails with:
[...]
Process .../gdb/testsuite/outputs/gdb.base/advance/advance created; pid = 2670
Listening on port 2346
target remote [...]:2346
Remote debugging using [...]:2346
Reading symbols from .../lib64/ld.so.1...done.
[Switching to Thread <main>]
(gdb) continue
Cannot execute this command without a live selected thread.
(gdb)
The problem is:
(gdb) c
Cannot execute this command without a live selected thread.
(gdb) info threads
Id Target Id Frame
1 Thread 14917 0x00007f341cd98ed0 in _start () from /lib64/ld-linux-x86-64.so.2
The current thread <Thread ID 2> has terminated. See `help thread'.
^^^^^^^^^^^
(gdb)
Note, thread _2_. There's really only one thread in the inferior
(it's still at the entry point), but still GDB added a bogus second
thread.
The reason GDB started adding a second thread after 5cd63fda03 is
this hunk:
+ if (event->ptid == null_ptid)
+ {
+ const char *thr = strstr (p1 + 1, ";thread:");
+ if (thr != NULL)
+ event->ptid = read_ptid (thr + strlen (";thread:"),
+ NULL);
+ else
+ event->ptid = magic_null_ptid;
+ }
Note the else branch that falls back to magic_null_ptid. We reach
that when we process the initial stop reply sent back in response to
the the "?" (status) packet early in the connection setup:
Sending packet: $?#3f...Ack
Packet received: T0506:0000000000000000;07:40a510f4fd7f0000;10:d0fe1201577f0000;
And note that that response does not include a ";thread:XXX" part.
This stop reply is processed after listing threads with qfThreadInfo /
qsThreadInfo :
Sending packet: $qfThreadInfo#bb...Ack
Packet received: m3915
Sending packet: $qsThreadInfo#c8...Ack
Packet received: l
meaning, when we process that stop reply, we treat the event as coming
from a thread with ptid == magic_null_ptid, which is not yet in the
thread list, so we add it then:
(top-gdb) p ptid
$1 = {m_pid = 42000, m_lwp = -1, m_tid = 1}
(top-gdb) bt
#0 0x0000000000840a8c in add_thread_silent(ptid_t) (ptid=...) at src/gdb/thread.c:269
#1 0x00000000007ad61d in remote_add_thread(ptid_t, int, int) (ptid=..., running=0, executing=0)
at src/gdb/remote.c:1838
#2 0x00000000007ad8de in remote_notice_new_inferior(ptid_t, int) (currthread=..., executing=0)
at src/gdb/remote.c:1921
#3 0x00000000007b758b in process_stop_reply(stop_reply*, target_waitstatus*) (stop_reply=0x1158860, status=0x7fffffffcc00)
at src/gdb/remote.c:7217
#4 0x00000000007b7a38 in remote_wait_as(ptid_t, target_waitstatus*, int) (ptid=..., status=0x7fffffffcc00, options=0)
at src/gdb/remote.c:7380
#5 0x00000000007b7cd1 in remote_wait(target_ops*, ptid_t, target_waitstatus*, int) (ops=0x102fac0 <remote_ops>, ptid=..., status=0x7fffffffcc00, options=0) at src/gdb/remote.c:7446
#6 0x000000000081587b in delegate_wait(target_ops*, ptid_t, target_waitstatus*, int) (self=0x102fac0 <remote_ops>, arg1=..., arg2=0x7fffffffcc00, arg3=0) at src/gdb/target-delegates.c:138
#7 0x0000000000827d77 in target_wait(ptid_t, target_waitstatus*, int) (ptid=..., status=0x7fffffffcc00, options=0)
at src/gdb/target.c:2179
#8 0x0000000000715fda in do_target_wait(ptid_t, target_waitstatus*, int) (ptid=..., status=0x7fffffffcc00, options=0)
at src/gdb/infrun.c:3589
#9 0x0000000000716351 in wait_for_inferior() () at src/gdb/infrun.c:3707
#10 0x0000000000715435 in start_remote(int) (from_tty=1) at src/gdb/infrun.c:3212
things go downhill from this.
We don't see the problem with current master gdbserver, because that
version always sends the ";thread:" part in the initial stop reply:
Sending packet: $?#3f...Packet received: T0506:0000000000000000;07:a0d4ffffff7f0000;10:d05eddf7ff7f0000;thread:p3cea.3cea;core:3;
Years ago I had added a "--disable-packet=" command line option to
gdbserver which comes in handy for testing this, since the existing
"--disable-packet=Tthread" precisely makes gdbserver not send that
";thread:" part in stop replies. The testcase added by this commit
emulates old gdbserver making use of that.
I've compared a testrun at 5cd63fda035d^ (before regression) with
'current master+patch', against old gdbserver at f8b73d13b7ca^. I
hacked out --once, and "monitor exit" to be able to test. The results
are a bit too unstable to tell accurately, but it looked like there
were no regressions. Maciej confirmed this worked for him as well.
No regressions on master (against master gdbserver).
gdb/ChangeLog:
2018-01-11 Pedro Alves <palves@redhat.com>
PR remote/22597
* remote.c (remote_parse_stop_reply): Default to the last-set
general thread instead of to 'magic_null_ptid'.
gdb/testsuite/ChangeLog:
2018-01-11 Pedro Alves <palves@redhat.com>
PR remote/22597
* gdb.server/stop-reply-no-thread.c: New file.
* gdb.server/stop-reply-no-thread.exp: New file.
This patch replaces VEC(gdb_xml_value_s), which is passed to XML
visitors, with an std::vector. In order to be able to remove the
cleanup in gdb_xml_parser::start_element, the gdb_xml_parser structure
is made to own the value with a gdb::unique_xmalloc_ptr.
This patch has been tested on the buildbot.
gdb/ChangeLog:
* xml-support.h (struct gdb_xml_value): Add constructor.
<value>: Change type to unique_xmalloc_ptr.
(gdb_xml_value_s): Remove typedef.
(DEF_VEC_O (gdb_xml_value_s)): Remove.
(gdb_xml_element_start_handler): Change parameter type to
std::vector.
(xml_find_attribute): Likewise.
* xml-support.c (xml_find_attribute): Change parameter type to
std::vector and adjust.
(gdb_xml_values_cleanup): Remove.
(gdb_xml_parser::start_element): Adjust to std::vector.
(xinclude_start_include): Change paraeter type to std::vector
and adjust.
* btrace.c (check_xml_btrace_version): Likewise.
(parse_xml_btrace_block): Likewise.
(parse_xml_btrace_pt_config_cpu): Likewise.
(parse_xml_btrace_pt): Likewise.
(parse_xml_btrace_conf_bts): Likewise.
(parse_xml_btrace_conf_pt): Likewise.
* memory-map.c (memory_map_start_memory): Likewise.
(memory_map_start_property): Likewise.
* osdata.c (osdata_start_osdata): Likewise.
(osdata_start_item): Likewise.
(osdata_start_column): Likewise.
* remote.c (start_thread): Likewise.
* solib-aix.c (library_list_start_library): Likewise.
(library_list_start_list): Likewise.
* solib-svr4.c (library_list_start_library): Likewise.
(svr4_library_list_start_list): Likewise.
* solib-target.c (library_list_start_segment): Likewise.
(library_list_start_section): Likewise.
(library_list_start_library): Likewise.
(library_list_start_list): Likewise.
* tracepoint.c (traceframe_info_start_memory): Likewise.
(traceframe_info_start_tvar): Likewise.
* xml-syscall.c (syscall_start_syscall): Likewise.
* xml-tdesc.c (tdesc_start_target): Likewise.
(tdesc_start_feature): Likewise.
(tdesc_start_reg): Likewise.
(tdesc_start_union): Likewise.
(tdesc_start_struct): Likewise.
(tdesc_start_flags): Likewise.
(tdesc_start_enum): Likewise.
(tdesc_start_field): Likewise.
(tdesc_start_enum_value): Likewise.
(tdesc_start_vector): Likewise.
Commit
remote: C++ify thread_item and threads_listing_context
21fe1c752e
broke the test gdb.threads/names.exp. The problem is that since we now
use an std::string to hold the extra_info, an empty string is returned
by target_extra_thread_info to print_thread_info_1 when the remote stub
didn't send any extra info, instead of NULL before. Because of that,
print_thread_info_1 prints the extra info between parentheses, which
results in some spurious empty parentheses.
Expected: * 1 Thread 22752.22752 "main" all_threads_ready () at ...
Actual : * 1 Thread 22752.22752 "main" () all_threads_ready () a ...
Since the bug was introduced by a behavior change in the remote target,
I chose to fix it on the remote target side by making it return NULL
when the extra string is empty. This will avoid possibly changing the
behavior of the common code and affecting other targets.
The name field has the same problem. If a remote stub returns no thread
names, remote_thread_name will return an empty string instead of NULL,
so print_thread_info_1 will show empty quotes ("") instead of nothing.
gdb/ChangeLog:
PR gdb/22556
* remote.c (remote_thread_name): Return NULL if name is empty.
(remote_threads_extra_info): Return NULL if extra info is empty.
I noticed that we're passing down a data/size pair to
target_ops::to_set_syscall_catchpoint. This commit makes use of
gdb::array_view instead. While at it, use bool where appropriate as
well.
gdb/ChangeLog:
* break-catch-syscall.c (insert_catch_syscall)
(remove_catch_syscall): Adjust to pass reference to
inf_data->syscalls_counts directly via gdb::array_view.
* fbsd-nat.c (fbsd_set_syscall_catchpoint): Adjust to use bool
and gdb::array_view.
* linux-nat.c (linux_child_set_syscall_catchpoint): Likewise.
* remote.c (remote_set_syscall_catchpoint): Likewise.
* target-debug.h (target_debug_print_bool): New.
(define target_debug_print_gdb_array_view_const_int): New.
* target-delegates.c: Regenerate.
* target.h (target_ops) <to_set_syscall_catchpoint>: Use
gdb::array_view and bool.
(target_set_syscall_catchpoint): Likewise.
I've noticed that "set remote target-features-packet off" before
connecting has no effect -- GDB still fetches a target description
anyway.
The problem is that while most "set remote foo-packet" commands were
fixed by:
From 4082afcc3d Mon Sep 17 00:00:00 2001
From: Pedro Alves <palves@redhat.com>
Date: Fri, 25 Apr 2014 18:07:02 +0100
Subject: [PATCH] Fix several "set remote foo-packet on/off" commands.
<https://sourceware.org/ml/gdb-patches/2014-04/msg00006.html>
the "qXfer" packets where missed. This commit fixes that.
I've changed remote_search_memory too for consistency (seems like
those are the last direct references to packet->support), though the
difference is not observable because the qSearch:memory packet is auto
probed. Note gdb.base/find-unmapped.exp already exercises explicit
"set remote search-memory-packet off".
gdb/ChangeLog:
2017-12-06 Pedro Alves <palves@redhat.com>
* remote.c (remote_query_supported): Don't send "xmlRegisters=" if
"qXfer:features:read"" is disabled.
(remote_write_qxfer, remote_read_qxfer, remote_search_memory):
Check packet_config_support instead of packet->support directly.
gdb/testsuite/ChangeLog:
2017-12-06 Pedro Alves <palves@redhat.com>
* gdb.arch/i386-avx.exp: If testing with a RSP target, check
force-disabling XML descriptions.
--
gdb/remote.c | 16 +++++++++-------
gdb/testsuite/gdb.arch/i386-avx.exp | 25 +++++++++++++++++++++++++
2 files changed, 34 insertions(+), 7 deletions(-)
There are multiple definitions of the private_thread_info structure
compiled in the same GDB build. Because of the one definition rule, we
need to change this if we want to be able to make them non-POD (e.g. use
std::vector fields). This patch creates a class hierarchy, with
private_thread_info being an abstract base class, and all the specific
implementations inheriting from it.
In order to poison XNEW/xfree for non-POD types, it is also needed to
get rid of the xfree in thread_info::~thread_info, which operates on an
opaque type. This is replaced by thread_info::priv now being a
unique_ptr, which calls the destructor of the private_thread_info
subclass when the thread is being destroyed.
Including gdbthread.h from darwin-nat.h gave these errors:
/Users/simark/src/binutils-gdb/gdb/gdbthread.h:609:3: error: must use 'class' tag to refer to type 'thread_info' in this scope
thread_info *m_thread;
^
class
/usr/include/mach/thread_act.h:240:15: note: class 'thread_info' is hidden by a non-type declaration of 'thread_info' here
kern_return_t thread_info
^
It turns out that there is a thread_info function in the Darwin/XNU/mach API:
http://web.mit.edu/darwin/src/modules/xnu/osfmk/man/thread_info.html
Therefore, I had to add the class keyword at a couple of places in gdbthread.h,
I don't really see a way around it.
gdb/ChangeLog:
* gdbthread.h (private_thread_info): Define structure type, add
virtual pure destructor.
(thread_info) <priv>: Change type to unique_ptr.
<private_dtor>: Remove.
* thread.c (add_thread_with_info): Adjust to use of unique_ptr.
(private_thread_info::~private_thread_info): Provide default
implementation.
(thread_info::~thread_info): Don't call private_dtor nor
manually free priv.
* aix-thread.c (private_thread_info): Rename to ...
(aix_thread_info): ... this.
(get_aix_thread_info): New.
(sync_threadlists): Adjust.
(iter_tid): Adjust.
(aix_thread_resume): Adjust.
(aix_thread_fetch_registers): Adjust.
(aix_thread_store_registers): Adjust.
(aix_thread_extra_thread_info): Adjust.
* darwin-nat.h (private_thread_info): Rename to ...
(darwin_thread_info): ... this.
(get_darwin_thread_info): New.
* darwin-nat.c (darwin_init_thread_list): Adjust.
(darwin_check_new_threads): Adjust.
(thread_info_from_private_thread_info): Adjust.
* linux-thread-db.c (private_thread_info): Rename to ...
(thread_db_thread_info): ... this, initialize fields.
(get_thread_db_thread_info): New.
<dying>: Change type to bool.
(update_thread_state): Adjust to type rename.
(record_thread): Adjust to type rename an use of unique_ptr.
(thread_db_pid_to_str): Likewise.
(thread_db_extra_thread_info): Likewise.
(thread_db_thread_handle_to_thread_info): Likewise.
(thread_db_get_thread_local_address): Likewise.
* nto-tdep.h (private_thread_info): Rename to ...
(nto_thread_info): ... this, initialize fields.
(get_nto_thread_info): New.
<name>: Change type to std::string.
* nto-tdep.c (nto_extra_thread_info): Adjust to type rename and
use of unique_ptr.
* nto-procfs.c (update_thread_private_data_name): Adjust to
std::string change, allocate nto_private_thread_info with new.
(update_thread_private_data): Adjust to unique_ptr.
* remote.c (private_thread_info): Rename to ...
(remote_thread_info): ... this, initialize data members with
default values.
<extra, name>: Change type to std::string.
<thread_handle>: Change type to non-pointer.
(free_private_thread_info): Remove.
(get_private_info_thread): Rename to...
(get_remote_thread_info): ... this, change return type, adjust to
use of unique_ptr, use remote_thread_info constructor.
(remote_add_thread): Adjust.
(get_private_info_ptid): Rename to...
(get_remote_thread_info): ...this, change return type.
(remote_thread_name): Use get_remote_thread_info, adjust to
change to std::string.
(struct thread_item) <~thread_item>: Remove.
<thread_handle>: Make non pointer.
(start_thread): Adjust to thread_item::thread_handle type
change.
(remote_update_thread_list): Adjust to type name change, move
strings from temporary to long-lived object instead of
duplicating.
(remote_threads_extra_info): Use get_remote_thread_info.
(process_initial_stop_replies): Likewise.
(resume_clear_thread_private_info): Likewise.
(remote_resume): Adjust to type name change.
(remote_commit_resume): Use get_remote_thread_info.
(process_stop_reply): Adjust to type name change.
(remote_stopped_by_sw_breakpoint): Use get_remote_thread_info.
(remote_stopped_by_hw_breakpoint): Likewise.
(remote_stopped_by_watchpoint): Likewise.
(remote_stopped_data_address): Likewise.
(remote_core_of_thread): Likewise.
(remote_thread_handle_to_thread_info): Use
get_private_info_thread, adjust to thread_handle field type
change.
This patch C++ifies the thread_item and threads_listing_context
structures in remote.c. thread_item::{extra,name} are changed to
std::string. As a result, there's a bit of awkwardness in
remote_update_thread_list, where we have to xstrdup those strings when
filling the private_thread_info structure. This is removed in the
following patch, where private_thread_info is also C++ified and its
corresponding fields made std::string too. The xstrdup then becomes an
std::move.
Other than that there's nothing really special, it's a usual day-to-day
VEC -> vector and char* -> std::string change. It allows removing a
cleanup in remote_update_thread_list.
Note that an overload of hex2bin that returns a gdb::byte_vector is
added, with corresponding selftests.
gdb/ChangeLog:
* remote.c (struct thread_item): Add constructor, disable copy
construction and copy assignment, define default move
construction and move assignment.
<extra, name>: Change type to std::string.
<core>: Initialize.
<thread_handle>: Make non-pointer.
(thread_item_t): Remove typedef.
(DEF_VEC_O(thread_item_t)): Remove.
(threads_listing_context) <contains_thread>: New method.
<remove_thread>: New method.
<items>: Change type to std::vector.
(clear_threads_listing_context): Remove.
(threads_listing_context_remove): Remove.
(remote_newthread_step): Use thread_item constructor, adjust to
change to std::vector.
(start_thread): Use thread_item constructor, adjust to change to
std::vector.
(end_thread): Adjust to change to std::vector and std::string.
(remote_get_threads_with_qthreadinfo): Use thread_item
constructor, adjust to std::vector.
(remote_update_thread_list): Adjust to change to std::vector and
std::string, use threads_listing_context methods.
(remove_child_of_pending_fork): Adjust.
(remove_new_fork_children): Adjust.
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add rsp-low-selftests.c.
(SUBDIR_UNITTESTS_OBS): Add rsp-low-selftests.o.
* unittests/rsp-low-selftests.c: New file.
* common/rsp-low.h: Include common/byte-vector.h.
(hex2bin): New overload.
* common/rsp-low.c (hex2bin): New overload.
There are currently multiple definitions of private_inferior, defined in
remote.c and darwin-nat.h. The patch that poisons XNEW and friends for
non-POD types trips on that, because private_inferior is freed in
~inferior(), where it is an opaque type. Since the compiler can't tell
whether the type is POD, it gives an error. Also, we can't start using
C++ features in these structures (make them non-POD) as long as there
are multiple definitions with the same name. For these reasons, this
patch makes a class hierarchy, with private_inferior being the abstract
base class, and darwin_inferior & remote_inferior inheriting from it.
Destruction is done through the virtual destructor.
I stumbled on some suspicious code in the darwin implementation though.
darwin_check_new_threads does an XCNEW(darwin_thread_t) when it finds a
new thread, allocating a new structure for it (darwin_thread_t is a
typedef for private_thread_info). It then VEC_safe_pushes it in a
vector defined as DEF_VEC_O (a vector of objects). This means that the
structure content gets copied in the vector. The thread_info object is
created with the XCNEW'ed structure as the private thread info, while
the rest of the code works with the instance in the vector. We have
therefore two distinct instances of darwin_thread_t/private_thread_info
for each thread. This is not really a problem in practice, because
thread_info::priv is not used in the darwin code. I still find it weird
and far from ideal, so I tried to fix it by changing the vector to be a
vector of pointers. There should now be a single instance of the
structure for each thread. The deallocation of the
darwin_thread_t/private_thread_info structure is done by the thread_info
destructor.
I am able to build on macOS, but not really test, since the port seems a
bit broken. I am not able to debug reliably on the machine I have
access to, which runs macOS 10.12.6.
gdb/ChangeLog:
* inferior.h (private_inferior): Define structure type, add
virtual pure destructor.
(inferior) <priv>: Change type to unique_ptr.
* inferior.c (private_inferior::~private_inferior): Provide
default implementation.
(inferior::~inferior): Don't free priv field.
(exit_inferior_1): Likewise.
* darwin-nat.h (struct darwin_exception_info): Initialize fields.
(darwin_exception_info): Remove typedef.
(DEF_VEC_O (darwin_thread_t)); Remove.
(private_inferior): Rename to ...
(darwin_private_inferior): ... this, extend private_inferior.
(get_darwin_inferior): New.
<threads>: Change type to std::vector of darwin_thread_t pointers.
* darwin-nat.c (darwin_check_new_threads): Adjust.
(find_inferior_task_it): Adjust.
(darwin_find_thread); Adjust.
(darwin_suspend_inferior): Adjust.
(darwin_resume_inferior): Adjust.
(darwin_find_new_inferior): Adjust.
(darwin_decode_notify_message): Adjust.
(darwin_send_reply): Adjust.
(darwin_resume_inferior_threads): Adjust.
(darwin_suspend_inferior_threads): Adjust.
(darwin_decode_message): Adjust.
(darwin_wait): Adjust.
(darwin_interrupt): Adjust.
(darwin_deallocate_threads): Adjust.
(darwin_mourn_inferior): Adjust, don't free private data.
(darwin_reply_to_all_pending_messages): Adjust.
(darwin_stop_inferior): Adjust.
(darwin_setup_exceptions): Adjust.
(darwin_kill_inferior): Adjust.
(darwin_setup_request_notification): Adjust.
(darwin_attach_pid): Adjust.
(darwin_init_thread_list): Adjust.
(darwin_setup_fake_stop_event): Adjust.
(darwin_attach): Adjust.
(darwin_detach): Adjust.
(darwin_xfer_partial): Adjust.
(set_enable_mach_exceptions): Adjust.
(darwin_pid_to_exec_file): Adjust.
(darwin_get_ada_task_ptid): Adjust.
* darwin-nat-info.c (get_task_from_args): Adjust.
(info_mach_ports_command): Adjust.
(info_mach_region_command): Adjust.
(info_mach_exceptions_command): Adjust.
* remote.c (private_inferior): Rename to ...
(remote_private_inferior): ... this, initialize fields.
(get_remote_inferior); New.
(remote_commit_resume): Use get_remote_inferior.
(check_pending_event_prevents_wildcard_vcont_callback): Likewise.
We have a customer who is using a Corelis gdb server to connect to gdb.
Occasionally, the gdb server will send a 0-byte block of memory for a
read. When this happens, gdb gives an assertion from target.c:
internal-error: target_xfer_partial: Assertion `*xfered_len > 0' failed.
This problem is almost identical to that fixed in
https://sourceware.org/ml/gdb-patches/2014-02/msg00636.html
In this case, remote.c needs to be modified to return TARGET_XFER_EOF
instead of TARGET_XFER_OK or TARGET_XFER_UNAVAILABLE when 0 bytes are
transferred.
gdb/ChangeLog:
PR gdb/22388
* remote.c (remote_write_bytes_aux, remote_read_bytes_1,
remote_read_bytes, remote_write_qxfer, remote_xfer_partial):
Return TARGET_XFER_EOF if size of returned data is 0.
Currently, encode_actions_rsp returns two malloc'ed arrays of malloc'ed
strings (char *) by pointer. Change this to use
std::vector<std::string>. This eliminates some cleanups in remote.c.
Regtested on the buildbot.
gdb/ChangeLog:
* tracepoint.h (class collection_list) <stringify>: Return
std::vector<std::string>.
(encode_actions_rsp): Change parameters to
std::vector<std::string> *.
* tracepoint.c (collection_list::stringify): Return
std::vector<std::string> and adjust accordingly.
(encode_actions_rsp): Changee parameters to
std::vector<std::string> and adjust accordingly.
* remote.c (free_actions_list),
free_actions_list_cleanup_wrapper): Remove.
(remote_download_tracepoint): Adjust to std::vector.
Simplify the code a little bit using std::string + string_appendf.
gdb/ChangeLog:
2017-10-30 Pedro Alves <palves@redhat.com>
Simon Marchi <simon.marchi@ericsson.com>
* remote.c (remote_set_syscall_catchpoint): Build a std::string
instead of a gdb::unique_xmalloc_ptr, using string_appendf.
remote.c:remote_async_terminal_ours_p stopped being useful after
048094accc ("target remote: Don't rely on immediate_quit (introduce
quit handlers)") and commit 41fd2b0f5d ("Make input_fd be per UI"),
which turned remote's terminal_inferior/ours methods into nops.
gdb/ChangeLog:
2017-10-26 Pedro Alves <palves@redhat.com>
* remote.c (remote_async_terminal_ours_p): Delete.
(remote_open_1, remote_terminal_inferior, remote_terminal_ours):
Remove references to 'remote_async_terminal_ours_p'.
This patch removes VEC (mem_region). Doing so requires touching a lot
of little things here and there.
The fields in mem_attrib are now initialized during construction. The
values match those that were in default_mem_attrib (now removed).
unknown_mem_attrib is also removed, and replaced with a static method
(mem_attrib::unknown) that returns the equivalent.
mem_region is initialized in a way similar to mem_region_init (now
removed) did.
I found the organization of mem_region_list and target_mem_region_list a
bit confusing. Sometimes mem_region_list points to the same vector as
target_mem_region_list (and therefore does not own it), and sometimes
(when the user manually edits the mem regions) points to another vector,
and in this case owns it. To avoid this ambiguity, I think it is
simpler to have two vectors, one for target-defined regions and one for
user-defined regions, and have mem_region_list point to one or the
other. There are now no vector objects dynamically allocated, both are
static.
The make-target-delegates script does not generate valid code when a
target method returns a type with a parameter list. For this reason, I
created a typedef (mem_region_vector) that's only used in the target_ops
structure. If you speak perl, you are welcome to improve the script!
Regtested on the buildbot.
gdb/ChangeLog:
* memattr.h: Don't include vec.h.
(struct mem_attrib): Initialize fields.
<unknown>: New static method.
(struct mem_region): Add constructors, operator<, initialize
fields.
* memattr.c: Include algorithm.
(default_mem_attrib, unknown_mem_attrib): Remove.
(user_mem_region_list): New global.
(target_mem_region_list, mem_region_list): Change type to
std::vector<mem_region>.
(mem_use_target): Now a function.
(target_mem_regions_valid): Change type to bool.
(mem_region_lessthan, mem_region_cmp, mem_region_init): Remove.
(require_user_regions): Adjust.
(require_target_regions): Adjust.
(create_mem_region): Adjust.
(lookup_mem_region): Adjust.
(invalidate_target_mem_regions): Adjust.
(mem_clear): Rename to...
(user_mem_clear): ... this, and adjust.
(mem_command): Adjust.
(info_mem_command): Adjust.
(mem_enable, enable_mem_command, mem_disable,
disable_mem_command): Adjust.
(mem_delete): Adjust.
(delete_mem_command): Adjust.
* memory-map.h (parse_memory_map): Return an std::vector.
* memory-map.c (parse_memory_map): Likewise.
(struct memory_map_parsing_data): Add constructor.
<memory_map>: Point to std::vector.
(memory_map_start_memory): Adjust.
(memory_map_end_memory): Adjust.
(memory_map_end_property): Adjust.
(clear_result): Remove.
* remote.c (remote_memory_map): Return an std::vector.
* target-debug.h (target_debug_print_VEC_mem_region_s__p):
Remove.
(target_debug_print_mem_region_vector): New.
* target-delegates.c: Regenerate.
* target.h (mem_region_vector): New typedef.
(to_memory_map): Return mem_region_vector.
(target_memory_map): Return an std::vector.
* target.c (target_memory_map): Return an std::vector.
(flash_erase_command): Adjust.
This removes a few cleanups in remote.c using the usual techniques:
std::vector, unique_xmalloc_ptr, and gdb::def_vector.
ChangeLog
2017-10-16 Tom Tromey <tom@tromey.com>
* remote.c (remote_register_number_and_offset): Use std::vector.
(remote_set_syscall_catchpoint): Use gdb::unique_xmalloc_ptr.
(putpkt_binary): Use gdb::def_vector.
(compare_sections_command): Use gdb::byte_vector.
This patch replaces the last usages of VEC(mem_range_s) with
std::vector<mem_range>. This allows getting rid of a few cleanups and
of the DEF_VEC_O(mem_range_s).
I added a test for normalize_mem_ranges to make sure I didn't break
anything there.
Regtested on the buildbot.
gdb/ChangeLog:
* memrange.h (struct mem_range): Define operator< and operator==.
(mem_range_s): Remove.
(DEF_VEC_O (mem_range_s)): Remove.
(normalize_mem_ranges): Change parameter type to std::vector.
* memrange.c (compare_mem_ranges): Remove.
(normalize_mem_ranges): Change parameter type to std::vector,
adjust to vector change.
* exec.c (section_table_available_memory): Return vector, remove
parameter.
(section_table_read_available_memory): Adjust to std::vector
change.
* remote.c (remote_read_bytes): Adjust to std::vector
change.
* tracepoint.h (traceframe_available_memory): Change parameter
type to std::vector.
* tracepoint.c (traceframe_available_memory): Change parameter
type to std::vector, adjust.
* gdb/mi/mi-main.c (mi_cmd_trace_frame_collected): Adjust to
std::vector change.
* gdb/Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
unittests/memrange-selftests.c.
(SUBDIR_UNITTESTS_OBS): Add memrange-selftests.o.
* gdb/unittests/memrange-selftests.c: New file.
Since this target method returns an allocated object, return a
unique_ptr. It allows getting rid a some cleanups here and there.
I had to shuffle the includes around. First, target.h now needs to
include tracepoint.h, to get the definition of traceframe_info_up.
However, the definition of enum trace_find_type was later in target, so
I had to move it to tracepoint.h, so that the declaration of tfind_1
could know about it. I then had to remove the include of target.h from
tracepoint.h, which caused a circular dependency (it was probably
included to get enum trace_find_type in the first place anyway).
Regression tested on the buildbot.
gdb/ChangeLog:
* target.h: Include tracepoint.h.
(enum trace_find_type): Move to tracepoint.h.
(struct target_ops) <to_traceframe_info>: Return a unique ptr.
* tracepoint.h: Don't include target.h
(enum trace_find_type): Move from target.h.
(parse_traceframe_info): Return a unique ptr.
* tracepoint.c (current_traceframe_info): Change type to unique
ptr.
(free_traceframe_info): Remove.
(clear_traceframe_info): Don't manually free
current_traceframe_info.
(free_result): Remove.
(parse_traceframe_info): Return a unique ptr.
(get_traceframe_info): Adjust to unique ptr.
* ctf.c (ctf_traceframe_info): Return a unique ptr.
* remote.c (remote_traceframe_info): Return a unique ptr.
* tracefile-tfile.c (tfile_traceframe_info): Return a unique
ptr.
* target-debug.h (target_debug_print_traceframe_info_up): New
macro.
* target-delegates.c: Regenerate.
When debugging two inferiors (or more) against gdbserver, and the
inferiors have different architectures, such as e.g., on x86_64
GNU/Linux and one inferior is 64-bit while the other is 32-bit, then
GDB can get confused with the different architectures in a couple
spots.
In both cases I ran into, GDB incorrectly ended up using the
architecture of whatever happens to be the selected inferior instead
of the architecture of some other given inferior:
#1 - When parsing the expedited registers in stop replies.
#2 - In the default implementation of the target_thread_architecture
target method.
These resulted in instances of the infamous "Remote 'g' packet reply
is too long" error. For example, with the test added in this commit,
we get:
~~~
Continuing.
Remote 'g' packet reply is too long (expected 440 bytes, got 816 bytes): ad064000000000000[snip]
(gdb) FAIL: gdb.multi/multi-arch.exp: inf1 event with inf2 selected: continue to hello_loop
c
Continuing.
Truncated register 50 in remote 'g' packet
(gdb) PASS: gdb.multi/multi-arch.exp: inf2 event with inf1 selected: c
~~~
This commit fixes that.
gdb/ChangeLog:
2017-10-04 Pedro Alves <palves@redhat.com>
* remote.c (get_remote_arch_state): New 'gdbarch' parameter. Use
it instead of target_gdbarch.
(get_remote_state, get_remote_packet_size): Adjust
get_remote_arch_state calls, passing down target_gdbarch
explicitly.
(packet_reg_from_regnum, packet_reg_from_pnum): New parameter
'gdbarch' and use it instead of target_gdbarch.
(get_memory_packet_size): Adjust get_remote_arch_state calls,
passing down target_gdbarch explicitly.
(struct stop_reply) <arch>: New field.
(remote_parse_stop_reply): Use the stopped thread's architecture,
not the current inferior's. Save the architecture in the
stop_reply.
(process_stop_reply): Use the stop reply's architecture.
(process_g_packet, remote_fetch_registers)
(remote_prepare_to_store, store_registers_using_G)
(remote_store_registers): Adjust get_remote_arch_state calls,
using the regcache's architecture.
(remote_get_trace_status): Adjust get_remote_arch_state calls,
passing down target_gdbarch explicitly.
* spu-multiarch.c (spu_thread_architecture): Defer to the target
beneath instead of calling target_gdbarch.
* target.c (default_thread_architecture): Use the specified
inferior's architecture, instead of the current inferior's
architecture (via target_gdbarch).
gdb/testsuite/ChangeLog:
2017-10-04 Pedro Alves <palves@redhat.com>
* gdb.multi/hangout.c: Include <unistd.h>.
(hangout_loop): New function.
(main): Call alarm. Call hangout_loop in a loop.
* gdb.multi/hello.c: Include <unistd.h>.
(hello_loop): New function.
(main): Call alarm. Call hangout_loop in a loop.
* gdb.multi/multi-arch.exp: Test running to a breakpoint one
inferior with the other selected.
This is the "natural" extension necessary for the "set cwd" command
(and the whole "set the inferior's cwd" logic) to work on gdbserver.
The idea here is to have a new remote packet, QSetWorkingDir (name
adopted from LLDB's extension to the RSP, as can be seen at
<https://raw.githubusercontent.com/llvm-mirror/lldb/master/docs/lldb-gdb-remote.txt>),
which sends an hex-encoded string representing the working directory
that the remote inferior will use. There is a slight difference from
the packet proposed by LLDB: GDB's version will accept empty
arguments, meaning that the user wants to clear the previously set
working directory for the inferior (i.e., "set cwd" without arguments
on GDB).
For UNIX-like targets this feature is already implemented on
nat/fork-inferior.c, and all gdbserver has to do is to basically
implement "set_inferior_cwd" and call it whenever such packet arrives.
For other targets, like Windows, it is possible to use the existing
"get_inferior_cwd" function and do the necessary steps to make sure
that the inferior will use the specified working directory.
Aside from that, the patch consists basically of updates to the
testcase (making it available on remote targets) and the
documentation.
No regressions found.
gdb/ChangeLog:
2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com>
* NEWS (Changes since GDB 8.0): Add entry about new
'set-cwd-on-gdbserver' feature.
(New remote packets): Add entry for QSetWorkingDir.
* common/common-inferior.h (set_inferior_cwd): New prototype.
* infcmd.c (set_inferior_cwd): Remove "static".
(show_cwd_command): Expand text to include remote debugging.
* remote.c: Add PACKET_QSetWorkingDir.
(remote_protocol_features) <QSetWorkingDir>: New entry for
PACKET_QSetWorkingDir.
(extended_remote_set_inferior_cwd): New function.
(extended_remote_create_inferior): Call
"extended_remote_set_inferior_cwd".
(_initialize_remote): Call "add_packet_config_cmd" for
QSetWorkingDir.
gdb/gdbserver/ChangeLog:
2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com>
* inferiors.c (set_inferior_cwd): New function.
* server.c (handle_general_set): Handle QSetWorkingDir packet.
(handle_query): Inform that QSetWorkingDir is supported.
* win32-low.c (create_process): Pass the inferior's cwd to
CreateProcess.
gdb/testsuite/ChangeLog:
2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.base/set-cwd.exp: Make it available on
native-extended-gdbserver.
gdb/doc/ChangeLog:
2017-10-04 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.texinfo (Starting your Program) <The working directory.>:
Mention remote debugging.
(Working Directory) <Your Program's Working Directory>:
Likewise.
(Connecting) <Remote Packet>: Add "set-working-dir"
and "QSetWorkingDir" to the table.
(Remote Protocol) <QSetWorkingDir>: New item, explaining the
packet.
This finally eliminates an old hack left in place when tracepoint RSP
support was migrated from tracepoint.c to remote.c, back in
35b1e5cca0 ("Make tracepoint operations go through target vector.")
over 7 years ago.
Tested on x86_64 GNU/Linux.
gdb/ChangeLog:
2017-09-29 Pedro Alves <palves@redhat.com>
* remote.c (target_buf, target_buf_size): Delete.
(remote_get_noisy_reply): Remove buf_p and sizeof_buf parameters.
Use the connection's packet buffer instead.
All callers adjusted.
(_initialize_remote): Remove references to target_buf and
target_buf_size.
This patch adds support to remote targets for converting a thread
handle to a thread_info struct pointer.
A thread handle is fetched via a "handle" attribute which has been
added to the qXfer:threads:read query packet. An implementation is
provided in gdbserver for targets using the Linux kernel.
gdb/gdbserver/ChangeLog:
* linux-low.h (struct lwp_info): Add new field, thread_handle.
(thread_db_thread_handle): Declare.
* linux-low.c (linux_target_ops): Initialize thread_handle.
* server.c (handle_qxfer_threads_worker): Add support for
"handle" attribute.
* target.h (struct target_ops): Add new function pointer,
thread_handle.
(target_thread_handle): Define.
* thread-db.c (find_one_thread, attach_thread): Set thread_handle
field in lwp.
(thread_db_thread_handle): New function.
gdb/ChangeLog:
* remote.c (vector): Include.
(struct private_thread_info): Add field, thread_handle.
(free_private_thread_info): Deallocate storage associated with
thread handle.
(get_private_info_thread): Initialize `thread_handle' field.
(struct thread_item): Add field, thread_handle.
(clear_threads_listing_context): Deallocate storage associated
with thread handle.
(start_thread): Add support for "handle" attribute.
(thread_attributes): Add "handle".
(remote_get_threads_with_qthreadinfo): Initialize thread_handle
field.
(remote_update_thread_list): Update thread_handle.
(remote_thread_handle_to_thread_info): New function.
(init_remote_ops): Initialize to_thread_handle_to_thread_info.
... by adding the expected size, and the received size. I found this
useful when debugging gdbarch/remote issues, since it gives a hint of
what gdb expects and what the remote sent.
gdb/ChangeLog:
* remote.c (process_g_packet): Update error message.
This patch implements the ability to set/unset environment variables
on the remote target, mimicking what GDB already offers to the user.
There are two features present here: user-set and user-unset
environment variables.
User-set environment variables are only the variables that are
explicitly set by the user, using the 'set environment' command. This
means that variables that were already present in the environment when
starting GDB/GDBserver are not transmitted/considered by this feature.
User-unset environment variables are variables that are explicitly
unset by the user, using the 'unset environment' command.
The idea behind this patch is to store user-set and user-unset
environment variables in two separate sets, both part of gdb_environ.
Then, when extended_remote_create_inferior is preparing to start the
inferior, it will iterate over the two sets and set/unset variables
accordingly. Three new packets are introduced:
- QEnvironmentHexEncoded, which is used to set environment variables,
and contains an hex-encoded string in the format "VAR=VALUE" (VALUE
can be empty if the user set a variable with a null value, by doing
'set environment VAR=').
- QEnvironmentUnset, which is used to unset environment variables, and
contains an hex-encoded string in the format "VAR".
- QEnvironmentReset, which is always the first packet to be
transmitted, and is used to reset the environment, i.e., discard any
changes made by the user on previous runs.
The QEnvironmentHexEncoded packet is inspired on LLDB's extensions to
the RSP. Details about it can be seen here:
<https://raw.githubusercontent.com/llvm-mirror/lldb/master/docs/lldb-gdb-remote.txt>
I decided not to implement the QEnvironment packet because it is
considered deprecated by LLDB. This packet, on LLDB, serves the same
purpose of QEnvironmentHexEncoded, but sends the information using a
plain text, non-hex-encoded string.
The other two packets are new.
This patch also includes updates to the documentation, testsuite, and
unit tests, without introducing regressions.
gdb/ChangeLog:
2017-08-31 Sergio Durigan Junior <sergiodj@redhat.com>
* NEWS (Changes since GDB 8.0): Add entry mentioning new support
for setting/unsetting environment variables on the remote target.
(New remote packets): Add entries for QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset.
* common/environ.c (gdb_environ::operator=): Extend method to
handle m_user_set_env_list and m_user_unset_env_list.
(gdb_environ::clear): Likewise.
(match_var_in_string): Change type of first parameter from 'char
*' to 'const char *'.
(gdb_environ::set): Extend method to handle
m_user_set_env_list and m_user_unset_env_list.
(gdb_environ::unset): Likewise.
(gdb_environ::clear_user_set_env): New method.
(gdb_environ::user_set_envp): Likewise.
(gdb_environ::user_unset_envp): Likewise.
* common/environ.h (gdb_environ): Handle m_user_set_env_list and
m_user_unset_env_list on move constructor/assignment.
(unset): Add new default parameter 'update_unset_list = true'.
(clear_user_set_env): New method.
(user_set_envp): Likewise.
(user_unset_envp): Likewise.
(m_user_set_env_list): New std::set.
(m_user_unset_env_list): Likewise.
* common/rsp-low.c (hex2str): New function.
(bin2hex): New overload for bin2hex function.
* common/rsp-low.c (hex2str): New prototype.
(str2hex): New overload prototype.
* remote.c: Include "environ.h". Add QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset.
(remote_protocol_features): Add QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset packets.
(send_environment_packet): New function.
(extended_remote_environment_support): Likewise.
(extended_remote_create_inferior): Call
extended_remote_environment_support.
(_initialize_remote): Add QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset packet configs.
* unittests/environ-selftests.c (gdb_selftest_env_var):
New variable.
(test_vector_initialization): New function.
(test_init_from_host_environ): Likewise.
(test_reinit_from_host_environ): Likewise.
(test_set_A_unset_B_unset_A_cannot_find_A_can_find_B):
Likewise.
(test_unset_set_empty_vector): Likewise.
(test_vector_clear): Likewise.
(test_std_move): Likewise.
(test_move_constructor):
(test_self_move): Likewise.
(test_set_unset_reset): Likewise.
(run_tests): Rewrite in terms of the functions above.
gdb/gdbserver/ChangeLog:
2017-08-31 Sergio Durigan Junior <sergiodj@redhat.com>
* server.c (handle_general_set): Handle QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset packets.
(handle_query): Inform remote that QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset are supported.
gdb/doc/ChangeLog:
2017-08-31 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.texinfo (set environment): Add @anchor. Explain that
environment variables set by the user are sent to GDBserver.
(unset environment): Likewise, but for unsetting variables.
(Connecting) <Remote Packet>: Add "environment-hex-encoded",
"QEnvironmentHexEncoded", "environment-unset", "QEnvironmentUnset",
"environment-reset" and "QEnvironmentReset" to the table.
(Remote Protocol) <QEnvironmentHexEncoded, QEnvironmentUnset,
QEnvironmentReset>: New item, explaining the packet.
gdb/testsuite/ChangeLog:
2017-08-31 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.base/share-env-with-gdbserver.c: New file.
* gdb.base/share-env-with-gdbserver.exp: Likewise.
There is an assertion that is triggering when we start GDB and
instruct it to debug a remote inferior, but don't provide a local
binary, like:
./gdb -nx -q --data-directory=data-directory -ex "tar ext :1234" \
-ex "set remote exec-file /bin/ls" -ex r
In this case, when calling exec_file_locate_attach to locate the
inferior, GDB is incorrectly resetting the breakpoints without a
thread/inferior even running, which causes an assertion to be
triggered:
binutils-gdb/gdb/thread.c:1609: internal-error: scoped_restore_current_thread::scoped_restore_current_thread(): Assertion `tp != NULL' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
This happens because add_current_inferior_and_thread (on remote.c) is
breaking an invariant: making inferior_ptid point to a non-existing
thread and then calling common code, which in this case is
breakpoint_re_set. The fix is to make sure that inferior_ptid points
to null_ptid if there is no thread present.
A testcase is provided. Regtested on buildbot.
gdb/ChangeLog:
2017-08-23 Pedro Alves <palves@redhat.com>
PR remote/21852
* remote.c (add_current_inferior_and_thread): Set inferior_ptid
to null_ptid and switch to thread without reading the registers
after adding the inferior.
gdb/testsuite/ChangeLog:
2017-08-23 Sergio Durigan Junior <sergiodj@redhat.com>
PR remote/21852
* gdb.server/normal.c: New file, copied from gdb.base.
* gdb.server/run-without-local-binary.exp: New file.
This introduces gdb_argv, a class wrapping an "argv" pointer; that is,
a pointer to a NULL-terminated array of char*, where both the array
and each non-NULL element in the array are xmalloc'd.
This patch then changes most users of gdb_buildargv to use gdb_argv
instead.
ChangeLog
2017-08-03 Tom Tromey <tom@tromey.com>
* utils.h (struct gdb_argv_deleter): New.
(gdb_argv): New class.
* utils.c (gdb_argv::reset): New method.
* tracepoint.c (delete_trace_variable_command): Use gdb_argv.
* tracefile.c (tsave_command): Use gdb_argv.
* top.c (new_ui_command): Use gdb_argv.
* symmisc.c (maintenance_print_symbols)
(maintenance_print_msymbols, maintenance_expand_symtabs): Use gdb_argv.
* symfile.c (symbol_file_command, generic_load)
(remove_symbol_file_command): Use gdb_argv.
* stack.c (backtrace_command): Use gdb_argv.
* source.c (add_path, show_substitute_path_command)
(unset_substitute_path_command, set_substitute_path_command):
Use gdb_argv.
* skip.c (skip_command): Use gdb_argv. Use gdb_buildargv.
* ser-mingw.c (pipe_windows_open): Use gdb_argv.
* remote.c (extended_remote_run, remote_put_command)
(remote_get_command, remote_delete_command): Use gdb_argv.
* remote-sim.c (gdbsim_load, gdbsim_create_inferior)
(gdbsim_open): Use gdb_argv.
* python/py-cmd.c (gdbpy_string_to_argv): Use gdb_argv.
* psymtab.c (maintenance_print_psymbols): Use gdb_argv.
* procfs.c (procfs_info_proc): Use gdb_argv.
* interps.c (interpreter_exec_cmd): Use gdb_argv.
* infrun.c (handle_command): Use gdb_argv.
* inferior.c (add_inferior_command, clone_inferior_command):
Use gdb_argv.
* guile/scm-string.c (gdbscm_string_to_argv): Use gdb_argv.
* exec.c (exec_file_command): Use gdb_argv.
* cli/cli-cmds.c (alias_command): Use gdb_argv.
* compile/compile.c (build_argc_argv): Use gdb_argv.
There were a few more places in gdb that could easily use
scoped_restore, replacing some cleanups.
ChangeLog
2017-08-03 Tom Tromey <tom@tromey.com>
* reverse.c (exec_direction_default): Remove.
(exec_reverse_once): Use scoped_restore.
* remote.c (restore_remote_timeout): Remove.
(remote_flash_erase, remote_flash_write, remote_flash_done)
(readchar, remote_serial_write): Use scoped_restore.
* cli/cli-script.c (struct source_cleanup_lines_args)
(source_cleanup_lines): Remove.
(script_from_file): Use scoped_restore.
* cli/cli-cmds.c (source_verbose_cleanup): Remove.
(source_command): Use scoped_restore.
This patch is going to remove a line comment, which was added in this
commit,
commit 55fea07
Author: Jim Kingdon <jkingdon@engr.sgi.com>
Date: Tue Sep 14 01:08:22 1993 +0000
* remote.c: Define remote_debug to 0 and #if 0 baud_rate. Temporary
hack so this file compiles again.
* remote-utils.c (gr_multi_scan): Cast return value from alloca.
(gr_multi_scan): #if 0 never-reached return(-1).
and at that moment, remote_prepare_to_store does updates some global
state,
static void
remote_prepare_to_store ()
{
/* Make sure the entire registers array is valid. */
read_register_bytes (0, (char *)NULL, REGISTER_BYTES);
}
However, now, remote_prepare_to_store doesn't do that at all, and
rsa->sizeof_g_packet is updated in init_remote_state, so the line of
comment is out of date, and this patch removes it.
gdb:
2017-07-18 Yao Qi <yao.qi@linaro.org>
* remote.c (store_registers_using_G): Remove one line comment.
This patch implements the proper support for the "startup-with-shell"
feature on gdbserver. A new packet is added, QStartupWithShell, and
it is sent on initialization. If the host sends a
"QStartupWithShell:1", it means the inferior shall be started using a
shell. If the host sends a "QStartupWithShell:0", it means the
inferior shall be started without using a shell. Any other value is
considered an error.
There is no way to remotely set the shell that will be used by the
target to start the inferior. In order to do that, the user must
start gdbserver while providing a shell via the $SHELL environment
variable. The same is true for the host side.
The "set startup-with-shell" setting from the host side is used to
decide whether to start the remote inferior using a shell. This same
setting is also used to decide whether to use a shell to start the
host inferior; this means that it is not really possible to start the
inferior using different mechanisms on target and host.
A documentation patch is included, along with a new testcase for the
feature.
gdb/ChangeLog:
2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com>
* NEWS (Changes since GDB 8.0): Announce that GDBserver is now
able to start inferiors using a shell.
(New remote packets): Announce new packet "QStartupWithShell".
* remote.c: Add PACKET_QStartupWithShell.
(extended_remote_create_inferior): Handle new
PACKET_QStartupWithShell.
(remote_protocol_features) <QStartupWithShell>: New entry for
PACKET_QStartupWithShell.
(_initialize_remote): Call "add_packet_config_cmd" for
QStartupShell.
gdb/gdbserver/ChangeLog:
2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com>
* server.c (handle_general_set): Handle new packet
"QStartupWithShell".
(handle_query): Add "QStartupWithShell" to the list of supported
packets.
(gdbserver_usage): Add help text explaining the
new "--startup-with-shell" and "--no-startup-with-shell" CLI
options.
(captured_main): Recognize and act upon the presence of the new
CLI options.
gdb/testsuite/ChangeLog:
2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.base/startup-with-shell.c: New file.
* gdb.base/startup-with-shell.exp: Likewise.
gdb/doc/ChangeLog:
2017-06-07 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.texinfo (Starting) <startup-with-shell>: Add @anchor.
(Connecting) <Remote Packet>: Add "startup-with-shell"
and "QStartupWithShell" to the table.
(Remote Protocol) <QStartupWithShell>: New item, explaining the
packet.
Breakpoints are currently in a limbo state between C and C++. There is
a pseudo class hierarchy implemented using struct fields. Taking
watchpoint as an example:
struct watchpoint
{
/* The base class. */
struct breakpoint base;
...
}
and it is instantianted with "new watchpoint ()". When destroyed, a
destructor is first invoked through the breakpoint_ops, and then the
memory is freed by calling delete through a pointer to breakpoint.
Address sanitizer complains about this, for example, because we new and
delete the same memory using different types.
This patch takes the logical step of making breakpoint subclasses extend
the breakpoint class for real, and converts their destructors to actual
C++ destructors.
Regtested on the buildbot.
gdb/ChangeLog:
* breakpoint.h (struct breakpoint_ops) <dtor>: Remove.
(struct breakpoint) <~breakpoint>: New.
(struct watchpoint): Inherit from breakpoint.
<~watchpoint>: New.
<base>: Remove.
(struct tracepoint): Inherit from breakpoint.
<base>: Remove.
* breakpoint.c (longjmp_breakpoint_ops): Remove.
(struct longjmp_breakpoint): Inherit from breakpoint.
<~longjmp_breakpoint>: New.
<base>: Remove.
(new_breakpoint_from_type): Remove casts.
(watchpoint_in_thread_scope): Remove reference to base field.
(watchpoint_del_at_next_stop): Likewise.
(update_watchpoint): Likewise.
(watchpoint_check): Likewise.
(bpstat_check_watchpoint): Likewise.
(set_longjmp_breakpoint): Likewise.
(struct fork_catchpoint): Inherit from breakpoint.
<base>: Remove.
(struct solib_catchpoint): Inherit from breakpoint.
<~solib_catchpoint>: New.
<base>: Remove.
(dtor_catch_solib): Change to ...
(solib_catchpoint::~solib_catchpoint): ... this.
(breakpoint_hit_catch_solib): Remove reference to base field.
(add_solib_catchpoint): Likewise.
(create_fork_vfork_event_catchpoint): Likewise.
(struct exec_catchpoint): Inherit from breakpoint.
<~exec_catchpoint>: New.
<base>: Remove.
(dtor_catch_exec): Change to ...
(exec_catchpoint::~exec_catchpoint): ... this.
(dtor_watchpoint): Change to ...
(watchpoint::~watchpoint): ... this.
(watch_command_1): Remove reference to base field.
(catch_exec_command_1): Likewise.
(base_breakpoint_dtor): Change to ...
(breakpoint::~breakpoint): ... this.
(base_breakpoint_ops): Remove dtor field value.
(longjmp_bkpt_dtor): Change to ...
(longjmp_breakpoint::~longjmp_breakpoint): ... this.
(strace_marker_create_breakpoints_sal): Remove reference to base
field.
(delete_breakpoint): Don't manually call breakpoint destructor.
(create_tracepoint_from_upload): Remove reference to base field.
(trace_pass_set_count): Likewise.
(initialize_breakpoint_ops): Don't initialize
momentary_breakpoint_ops, don't set dtors.
* ada-lang.c (struct ada_catchpoint): Inherit from breakpoint.
<~ada_catchpoint>: New.
<base>: Remove.
(create_excep_cond_exprs): Remove reference to base field.
(dtor_exception): Change to ...
(ada_catchpoint::~ada_catchpoint): ... this.
(dtor_catch_exception): Remove.
(dtor_catch_exception_unhandled): Remove.
(dtor_catch_assert): Remove.
(create_ada_exception_catchpoint): Remove reference to base
field.
(initialize_ada_catchpoint_ops): Don't set dtors.
* break-catch-sig.c (struct signal_catchpoint): Inherit from
breakpoint.
<~signal_catchpoint>: New.
<base>: Remove.
(signal_catchpoint_dtor): Change to ...
(signal_catchpoint::~signal_catchpoint): ... this.
(create_signal_catchpoint): Remove reference to base field.
(initialize_signal_catchpoint_ops): Don't set dtor.
* break-catch-syscall.c (struct syscall_catchpoint): Inherit
from breakpoint.
<~syscall_catchpoint>: New.
<base>: Remove.
(dtor_catch_syscall): Change to ...
(syscall_catchpoint::~syscall_catchpoint): ... this.
(create_syscall_event_catchpoint): Remove reference to base
field.
(initialize_syscall_catchpoint_ops): Don't set dtor.
* break-catch-throw.c (struct exception_catchpoint): Inherit
from breakpoint.
<~exception_catchpoint>: New.
<base>: Remove.
(dtor_exception_catchpoint): Change to ...
(exception_catchpoint::~exception_catchpoint): ... this.
(handle_gnu_v3_exceptions): Remove reference to base field.
(initialize_throw_catchpoint_ops): Don't set dtor.
* ctf.c (ctf_get_traceframe_address): Remove reference to base
field.
* remote.c (remote_get_tracepoint_status): Likewise.
* tracefile-tfile.c (tfile_get_traceframe_address): Likewise.
* tracefile.c (tracefile_fetch_registers): Likewise.
* tracepoint.c (actions_command): Likewise.
(validate_actionline): Likewise.
(tfind_1): Likewise.
(get_traceframe_location): Likewise.
(find_matching_tracepoint_location): Likewise.
(parse_tracepoint_status): Likewise.
* mi/mi-cmd-break.c (mi_cmd_break_passcount): Likewise.
After all the make_cleanup_restore_current_thread fixing, I thought
I'd convert that and its relatives (which are all cleanups) to RAII
classes.
scoped_restore_current_pspace_and_thread was put in a separate file to
avoid a circular dependency.
Tested on x86-64 Fedora 23, native and gdbserver.
gdb/ChangeLog:
2017-05-04 Pedro Alves <palves@redhat.com>
* Makefile.in (SFILES): Add progspace-and-thread.c.
(HFILES_NO_SRCDIR): Add progspace-and-thread.h.
(COMMON_OBS): Add progspace-and-thread.o.
* breakpoint.c: Include "progspace-and-thread.h".
(update_inserted_breakpoint_locations)
(insert_breakpoint_locations, create_longjmp_master_breakpoint):
Use scoped_restore_current_pspace_and_thread.
(create_std_terminate_master_breakpoint): Use
scoped_restore_current_program_space.
(remove_breakpoint): Use scoped_restore_current_pspace_and_thread.
(print_breakpoint_location): Use
scoped_restore_current_program_space.
(bp_loc_is_permanent): Use
scoped_restore_current_pspace_and_thread.
(resolve_sal_pc): Use scoped_restore_current_pspace_and_thread.
(download_tracepoint_locations): Use
scoped_restore_current_pspace_and_thread.
(breakpoint_re_set): Use scoped_restore_current_pspace_and_thread.
* exec.c (exec_close_1): Use scoped_restore_current_program_space.
(enum step_over_calls_kind): Moved from inferior.h.
(class scoped_restore_current_thread): New class.
* gdbthread.h (make_cleanup_restore_current_thread): Delete
declaration.
(scoped_restore_current_thread): New class.
* infcmd.c: Include "common/gdb_optional.h".
(continue_1, proceed_after_attach): Use
scoped_restore_current_thread.
(notice_new_inferior): Use scoped_restore_current_thread.
* inferior.c: Include "progspace-and-thread.h".
(restore_inferior, save_current_inferior): Delete.
(add_inferior_command, clone_inferior_command): Use
scoped_restore_current_pspace_and_thread.
* inferior.h (scoped_restore_current_inferior): New class.
* infrun.c: Include "progspace-and-thread.h" and
"common/gdb_optional.h".
(follow_fork_inferior): Use
scoped_restore_current_pspace_and_thread.
(scoped_restore_exited_inferior): New class.
(handle_vfork_child_exec_or_exit): Use
scoped_restore_exited_inferior,
scoped_restore_current_pspace_and_thread,
scoped_restore_current_thread and scoped_restore.
(fetch_inferior_event): Use scoped_restore_current_thread.
* linespec.c (decode_line_full, decode_line_1): Use
scoped_restore_current_program_space.
* mi/mi-main.c: Include "progspace-and-thread.h".
(exec_continue): Use scoped_restore_current_thread.
(mi_cmd_exec_run): Use scoped_restore_current_pspace_and_thread.
(mi_cmd_trace_frame_collected): Use scoped_restore_current_thread.
* proc-service.c (ps_pglobal_lookup): Use
scoped_restore_current_program_space.
* progspace-and-thread.c: New file.
* progspace-and-thread.h: New file.
* progspace.c (release_program_space, clone_program_space): Use
scoped_restore_current_program_space.
(restore_program_space, save_current_program_space)
(save_current_space_and_thread): Delete.
(switch_to_program_space_and_thread): Moved to
progspace-and-thread.c.
* progspace.h (save_current_program_space)
(save_current_space_and_thread): Delete declarations.
(scoped_restore_current_program_space): New class.
* remote.c (remote_btrace_maybe_reopen): Use
scoped_restore_current_thread.
* symtab.c: Include "progspace-and-thread.h".
(skip_prologue_sal): Use scoped_restore_current_pspace_and_thread.
* thread.c (print_thread_info_1): Use
scoped_restore_current_thread.
(struct current_thread_cleanup): Delete.
(do_restore_current_thread_cleanup)
(restore_current_thread_cleanup_dtor): Rename/convert both to ...
(scoped_restore_current_thread::~scoped_restore_current_thread):
... this new dtor.
(make_cleanup_restore_current_thread): Rename/convert to ...
(scoped_restore_current_thread::scoped_restore_current_thread):
... this new ctor.
(thread_apply_all_command): Use scoped_restore_current_thread.
(thread_apply_command): Use scoped_restore_current_thread.
* tracepoint.c (tdump_command): Use scoped_restore_current_thread.
* varobj.c (value_of_root_1): Use scoped_restore_current_thread.
This patch changes various places to use ui_out_emit_tuple,
eliminating a number of cleanups. This patch only tackles "easy"
cases, which are ones where the cleanups in question were
block-structured and did not involve any changes other than the
obvious replacement.
ChangeLog
2017-04-22 Tom Tromey <tom@tromey.com>
* record-btrace.c (record_btrace_insn_history)
(record_btrace_insn_history_range, record_btrace_call_history)
(record_btrace_call_history_range): Use ui_out_emit_tuple.
* thread.c (do_captured_list_thread_ids, print_thread_info_1): Use
ui_out_emit_tuple.
* stack.c (print_frame_info): Use ui_out_emit_tuple.
* solib.c (info_sharedlibrary_command): Use ui_out_emit_tuple.
* skip.c (skip_info): Use ui_out_emit_tuple.
* remote.c (show_remote_cmd): Use ui_out_emit_tuple.
* progspace.c (print_program_space): Use ui_out_emit_tuple.
* probe.c (info_probes_for_ops): Use ui_out_emit_tuple.
* osdata.c (info_osdata): Use ui_out_emit_tuple.
* mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Use
ui_out_emit_tuple.
* mi/mi-main.c (print_one_inferior, list_available_thread_groups)
(output_register, mi_cmd_data_read_memory)
(mi_cmd_data_read_memory_bytes, mi_load_progress)
(mi_cmd_trace_frame_collected): Use ui_out_emit_tuple.
* mi/mi-cmd-var.c (mi_cmd_var_list_children, varobj_update_one):
Use ui_out_emit_tuple.
* mi/mi-cmd-stack.c (mi_cmd_stack_list_args): Use
ui_out_emit_tuple.
* mi/mi-cmd-info.c (mi_cmd_info_ada_exceptions)
(mi_cmd_info_gdb_mi_command): Use ui_out_emit_tuple.
* linux-thread-db.c (info_auto_load_libthread_db): Use
ui_out_emit_tuple.
* inferior.c (print_inferior): Use ui_out_emit_tuple.
* gdb_bfd.c (print_one_bfd): Use ui_out_emit_tuple.
* disasm.c (do_mixed_source_and_assembly_deprecated)
(do_mixed_source_and_assembly): Use ui_out_emit_tuple.
* cp-abi.c (list_cp_abis): Use ui_out_emit_tuple.
* cli/cli-setshow.c (cmd_show_list): Use ui_out_emit_tuple.
* breakpoint.c (print_one_breakpoint_location)
(print_one_breakpoint): Use ui_out_emit_tuple.
* auto-load.c (print_script, info_auto_load_cmd): Use
ui_out_emit_tuple.
* ada-tasks.c (print_ada_task_info): Use ui_out_emit_tuple.
This is a follow-up to an earlier patch. It changes breakpoint's
location and location_range_end members to be of type
event_location_up, then fixes up the users.
gdb/ChangeLog
2017-04-12 Tom Tromey <tom@tromey.com>
* remote.c (remote_download_tracepoint): Update.
* python/py-breakpoint.c (bppy_get_location): Update.
* guile/scm-breakpoint.c (bpscm_print_breakpoint_smob)
(gdbscm_breakpoint_location): Update.
* elfread.c (elf_gnu_ifunc_resolver_return_stop): Update.
* breakpoint.h (struct breakpoint) <location, location_range_end>:
Change type to event_location_up.
* breakpoint.c (create_overlay_event_breakpoint)
(create_longjmp_master_breakpoint)
(create_std_terminate_master_breakpoint)
(create_exception_master_breakpoint)
(breakpoint_event_location_empty_p, print_breakpoint_location)
(print_one_breakpoint_location, create_thread_event_breakpoint)
(init_breakpoint_sal, create_breakpoint)
(print_recreate_ranged_breakpoint, break_range_command)
(init_ada_exception_breakpoint, say_where): Update.
(base_breakpoint_dtor): Don't call delete_event_location.
(bkpt_print_recreate, tracepoint_print_recreate)
(dprintf_print_recreate, update_static_tracepoint)
(breakpoint_re_set_default): Update.
As a preparation for the next patch, which will move fork_inferior
from GDB to common/ (and therefore share it with gdbserver), it is
interesting to convert a few functions to C++.
This patch touches functions related to parsing command-line arguments
to the inferior (see gdb/fork-child.c:breakup_args), the way the
arguments are stored on fork_inferior (using std::vector instead of
char **), and the code responsible for dealing with argv also on
gdbserver.
I've taken this opportunity and decided to constify a few arguments to
fork_inferior/create_inferior as well, in order to make the code
cleaner. And now, on gdbserver, we're using xstrdup everywhere and
aren't checking for memory allocation failures anymore, as requested
by Pedro:
<https://sourceware.org/ml/gdb-patches/2017-03/msg00191.html>
Message-Id: <025ebdb9-90d9-d54a-c055-57ed2406b812@redhat.com>
Pedro Alves wrote:
> On the "== NULL" check: IIUC, the old NULL check was there to
> handle strdup returning NULL due to out-of-memory.
> See NULL checks and comments further above in this function.
> Now that you're using a std::vector, that doesn't work or make
> sense any longer, since if push_back fails to allocate space for
> its internal buffer (with operator new), our operator new replacement
> (common/new-op.c) calls malloc_failure, which aborts gdbserver.
>
> Not sure it makes sense to handle out-of-memory specially in
> the gdb/rsp-facing functions nowadays (maybe git blame/log/patch
> submission for that code shows some guidelines). Maybe (or, probably)
> it's OK to stop caring about it, but then we should consistently remove
> left over code, by using xstrdup instead and remove the NULL checks.
IMO this refactoring was very good to increase the readability of the
code as well, because some parts of the argument handling were
unnecessarily confusing before.
gdb/ChangeLog:
2017-04-12 Sergio Durigan Junior <sergiodj@redhat.com>
* common/common-utils.c (free_vector_argv): New function.
* common/common-utils.h: Include <vector>.
(free_vector_argv): New prototype.
* darwin-nat.c (darwin_create_inferior): Rewrite function
prototype in order to constify "exec_file" and accept a
"std::string" for "allargs".
* fork-child.c: Include <vector>.
(breakup_args): Rewrite function, using C++.
(fork_inferior): Rewrite function header, constify "exec_file_arg"
and accept "std::string" for "allargs". Update the code to
calculate "argv" based on "allargs". Update calls to "exec_fun"
and "execvp".
* gnu-nat.c (gnu_create_inferior): Rewrite function prototype in
order to constify "exec_file" and accept a "std::string" for
"allargs".
* go32-nat.c (go32_create_inferior): Likewise.
* inf-ptrace.c (inf_ptrace_create_inferior): Likewise.
* infcmd.c (run_command_1): Constify "exec_file". Use
"std::string" for inferior arguments.
* inferior.h (fork_inferior): Update prototype.
* linux-nat.c (linux_nat_create_inferior): Rewrite function
prototype in order to constify "exec_file" and accept a
"std::string" for "allargs".
* nto-procfs.c (procfs_create_inferior): Likewise.
* procfs.c (procfs_create_inferior): Likewise.
* remote-sim.c (gdbsim_create_inferior): Likewise.
* remote.c (extended_remote_run): Update code to accept
"std::string" as argument.
(extended_remote_create_inferior): Rewrite function prototype in
order to constify "exec_file" and accept a "std::string" for
"allargs".
* rs6000-nat.c (super_create_inferior): Likewise.
(rs6000_create_inferior): Likewise.
* target.h (struct target_ops) <to_create_inferior>: Likewise.
* windows-nat.c (windows_create_inferior): Likewise.
gdb/gdbserver/ChangeLog:
2017-04-12 Sergio Durigan Junior <sergiodj@redhat.com>
* server.c: Include <vector>.
<program_argv, wrapper_argv>: Convert to std::vector.
(start_inferior): Rewrite function to use C++.
(handle_v_run): Likewise. Update code that calculates the argv
based on the vRun packet; use C++.
(captured_main): Likewise.
It's the only place in the codebase that uses "struct ptid", so change
it to ptid_t for consistency.
gdb/ChangeLog:
* remote.c (set_general_thread, set_continue_thread): Use ptid_t
instead of struct ptid.
The target parameter in both solib_add and update_solib_list
functions is not used anymore and as not been used for a while. This
change removes the parameter to clean up the code a little bit.
gdb/ChangeLog:
* infcmd.c (post_create_inferior): Remove unused argument in
call to solib_add.
* remote.c (remote_start_remote): Likewise.
* solib-frv.c (frv_fetch_objfile_link_map): Likewise.
* solib-svr4.c: (svr4_fetch_objfile_link_map): Likewise.
(enable_break): Likewise.
* solib.c (update_solib_list): Remove unused target argument
and its documentation.
(solib_add): Remove unused target argument. Remove unused
argument in call to update_solib_list.
(info_sharedlibrary_command): Remove unused argument in call
to update_solib_list.
(sharedlibrary_command): Remove unused argument in call to
solib_add.
(handle_solib_event): Likewise.
(reload_shared_libraries): Likewise.
* solib.h (solib_add): Remove unused target argument.
Signed-off-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
The previous patch introduced this error with recent-ish GCCs:
../../binutils-gdb/gdb/remote.c: In function ‘int remote_add_target_side_condition(gdbarch*, bp_target_info*, char*, char*)’:
../../binutils-gdb/gdb/remote.c:9668:8: error: types may not be defined in a for-range-declaration [-Werror]
for (struct agent_expr *aexpr : bp_tgt->conditions)
^~~~~~
Removing the struct keyword fixes the error.
gdb/ChangeLog:
* remote.c (remote_add_target_side_condition): Remove "struct"
keyword from range-based for loop.
Using a range based for loop makes this code a bit more clean and
readable.
The comment above is clearly erroneous, so I've updated it.
gdb/ChangeLog:
* remote.c (remote_add_target_side_condition): Use range-based
for loop. Update comment.
Tom Tromey
Pedro Alves
Simon Marchi
Andrzej Kaczmarek
Sergio Durigan Junior
Simon Marchi
Markus Metzger
Joel Brobecker
Paul Carroll
Yao Qi
Kevin Buettner
John Baldwin
Alan Hayward
Marc-Andre Laperle