start-sanitize-gdbtk Mon May 13 13:43:25 1996 Fred Fish * gdbtk.c (tk_command): Catch case where no argument is given since this will cause the tcl interpreter to dump core. end-sanitize-gdbtk Mon May 13 17:40:58 1996 Jeffrey A Law (law@cygnus.com) * top.c (execute_control_command, case while_control): Allow a while command to be interrupted. Mon May 13 16:17:36 1996 Stu Grossman (grossman@critters.cygnus.com) * sol-thread.c: More cleanup, add comments. * (sol_thread_resume): Prevent people from trying to step inactive threads. * (sol_thread_wait sol_thread_fetch_registers sol_thread_store_registers): Remove unnecessary check for sol_thread_active. These routines won't get called unless threads are active. Mon May 13 11:29:37 1996 Stan Shebs SH3-E support from Allan Tajii : * sh-tdep.c (sh_reg_names, sh3_reg_names): Add empty names for float registers. (sh3e_reg_names): New register name array. (sh_processor_type_table): Add sh3e processor type. * config/sh/tm-sh.h (REGISTER_VIRTUAL_TYPE): Fix test. (REGISTER_NAMES, NUM_REGS, NUM_REALREGS, etc): Adjust for full set of registers. * remote-e7000.c (want_sh3, want_sh3_nopc): New globals. (e7000_fetch_registers, e7000_wait): Use them. * sh3-rom.c (sh3_regnames): Add float registers. (sh3e_cmds, sh3e_ops): New globals. (sh3e_open): New function. (_initialize_sh3_rom): Rename from _initialize_sh3, set up sh3e target vector. Fri May 10 15:53:38 1996 Stu Grossman (grossman@lisa.cygnus.com) * sol-thread.c: Cleanup. gcc -Wall fixes. Add prototypes. Print out messages instead of codes for thread_db errors. Make access macros for thread and lwp manipulation. Make cleanups to fixup inferior_pid in case of errors. Thu May 9 19:06:02 1996 Fred Fish * aclocal.m4: Remove unused definition of AC_C_CROSS. * configure.in: Add powerpcle-*-solaris* host and target config so April 30th change does not get lost next time configure is rebuilt. Thu May 9 14:13:08 1996 Stu Grossman (grossman@critters.cygnus.com) * Makefile.in, breakpoint.c, corelow.c, fork-child.c, inflow.c, infrun.c, mac-nat.c, procfs.c, remote.c, sol-thread.c, thread.c, win32-nat.c, config/nm-lynx.h: Rename thread.h to gdbthread.h to avoid conflict with Solaris /usr/include/thread.h. Thu May 9 12:33:32 1996 Rob Savoye * abug-rom.c: Config file for the older style ABug monitor that runs on the mvme13x boards. * config/m68k/monitor.mt: Add abug support for m68k cross debugging. Wed May 8 20:33:24 1996 Fred Fish * infcmd.c (do_registers_info): Always print the raw floating point value's bytes in big endian order, so the the leftmost bit is the most significant. * breakpoint.c (clear_momentary_breakpoints): Remove dead code that is referenced nowhere else. (set_breakpoint): Ditto. (do_enable_breakpoint): Created from enable_once_breakpoint with a couple of changes. (enable_breakpoint): Call do_enable_breakpoint with an appropriate bpdisp enum value to set disposition of breakpoint. (enable_once_breakpoint): Ditto. (enable_delete_breakpoint): Ditto. * breakpoint.h (clear_momentary_breakpoints): Remove prototype. * symtab.c (find_pc_line): Improve comments. start-sanitize-gdbtk * gdbtk.c: Fix a couple of misspellings. end-sanitize-gdbtk * xcoffread.c: Ditto. Tue May 7 18:37:06 1996 Stan Shebs * target.c (debug_to_xfer_memory): Insert line breaks when dumping the memory block. Mon May 6 13:52:52 1996 Stu Grossman (grossman@critters.cygnus.com) * fork-child.c (fork_inferior), inferior.h: init_trace_fun now returns a possibly modified pid. * inftarg.c (ptrace_him): Now returns pid; * m3-nat.c (m3_trace_him): Now returns pid; * infcmd.c (run_command): Minor cleanup. * infrun.c (wait_for_inferior): Add another check for one_stepped near where we read the pc to avoid erroneously setting random_signal for multi-threaded support. * procfs.c: Add support for Solaris LWPs. Remove def of LOSING_POLL. Many cleanups... Several workarounds for Solaris lossage. System call entry and exit are now handled by dynamically registered handlers. * (syscallname): Don't barf when handed an unknown syscall number. * (info_proc_syscalls): Ditto. * sol-thread.c: New file. Implements Solaris thread support. * symfile.c (symbol_file_add): Add call to target_new_objfile to notify target-dependent code about new symbol tables. * (clear_symtab_users): Call target_new_objfile to notify it of the removal of all symbol tables. * target.c (push_target): Make sure that to_close is non-zero before calling it. * target.h (target_new_objfile): Provide default. * config/alpha/nm-osf2.h: Define LOSING_POLL because this version of OSF can't hack using poll with /proc. * config/sparc/nm-sun4sol2.h (target_new_objfile): Define to be sol-thread-new-objfile. * config/sparc/sun4sol2.mh: Add sol-thread.o to NATDEFFILES, and add libthread_db.so.1 to NAT_CLIBS. * config/sparc/tm-sun4sol2.h: Define PIDGET, TIDGET, and target_pid_to_str. Sat May 4 02:13:34 1996 N Srin Kumar * procfs.c (remove_fd): Fix copy of fds to fill hole left after removal of the requested fd. Mon May 6 07:52:48 1996 Michael Meissner * rs6000-tdep.c (_initialize_rs6000_tdep): Don't do XCOFF specific hooks under ELF. * config/powerpc/tm-ppc-eabi.h: Define ELF_OBJECT_FORMAT. start-sanitize-gdbtk Thu May 2 19:17:49 1996 Stan Shebs * gdbtk.tcl (debug_interface): New global, use to aid debugging. (insert_breakpoint_tag, delete_breakpoint_tag): Fix range. (file_popup_menu): Delete, never used. (listing_window_popup): Rename from listing_window_button_1, remove breakpoint toggling code. (toggle_breakpoint): New procedure. (create_file_win): Bind popup menu to button 2, toggle breakpoints with button 1 in breakpoint area, add display of tagged areas if debugging on. end-sanitize-gdbtk Thu May 2 12:46:14 1996 Jeffrey A Law (law@cygnus.com) From Peter Schauer: * breakpoint.h (enum bpdisp): Add del_at_next_stop. * breakpoint.c (insert_breakpoints, watchpoint_check, bpstat_stop_status): Avoid bad references to memory freed via delete_breakpoint on watchpoints going out of scope. Do not delete these watchpoints, disable them and change their disposition to del_at_next_stop instead. (breakpoint_auto_delete): Delete all breakpoints whose disposition is del_at_next_stop. (breakpoint_init_inferior): Use switch to avoid reference to already deleted breakpoint. Wed May 1 17:29:18 1996 Fred Fish * Makefile.in (rs6000-nat.o): Depend on xcoffsolib.h. * config/rs6000/rs6000.mh (NATDEPFILES): Move xcoffread.o ... * config/rs6000/rs6000.mt (TDEPFILES): ... to here. * xcoffsolib.c (xcoff_relocate_symtab_hook): Define and initialize. (solib_info): Call xcoff_relocate_symtab via the hook. (sharedlibrary_command): Ditto. * xcoffread.c: Remove all FAKING_RS6000 comments and defines. (xcoff_add_toc_to_loadinfo_hook): Define and initialize here. (xcoff_init_loadinfo_hook): Define and initialize here. (scan_xcoff_symtab): Call xcoff_add_toc_to_loadinfo via the hook. (xcoff_initial_scan): Call xcoff_init_loadinfo via the hook. * xcoffsolib.h (xcoff_relocate_symtab_hook): Declare extern func. * rs6000-tdep.c (_initialize_rs6000_tdep): Add initializations of xcoff_add_toc_to_loadinfo_hook and xcoff_init_loadinfo_hook. * rs6000-nat.c (_initialize_core_rs6000): Add initialization of xcoff_relocate_symtab_hook. Tue Apr 30 13:22:02 1996 Michael Meissner * configure (powerpcle-*-solaris*): Add Solaris support. * config/powerpc/{solaris.m[ht],tm-solaris.h}: New files for Solaris support. Mon Apr 29 16:17:31 1996 Dawn Perchik * c-valprint.c (c_val_print): Fix printing for arrays defined with 0 length. Sun Apr 28 15:08:05 1996 Stan Shebs Support for bi-endian remote breakpoints. * remote.c (big_break_insn, little_break_insn): New globals. (break_insn): Remove. (remote_insert_breakpoint, remote_remove_breakpoint): Use own code if REMOTE_BREAKPOINT defined, otherwise call memory breakpoint functions. * config/sh/tm-sh.h (REMOTE_BREAKPOINT): Remove. (BIG_REMOTE_BREAKPOINT, LITTLE_REMOTE_BREAKPOINT): Define. * mon960-rom.c (mon960_cmds): Remove forward decl. (mon960_load): Use current_monitor instead of mon960_cmds. (mon960_regnames): Remove backslashes from line ends. (_initialize_mon960): Fix documentation string. Sun Apr 28 12:10:35 1996 Fred Fish * symfile.h (psymbol_allocation_list): Expand comments which describe the psymbol allocation list and how each field is used. Sun Apr 28 03:44:30 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * breakpoint.c (delete_breakpoint): Fix bpt->val, bpt->exp storage leaks. (breakpoint_re_set_one): Fix b->exp, b->val, b->cond storage leaks. * infcmd.c (run_command), solib.c (locate_base): Check for target_has_execution in addition to inferior_pid, a core file from a threaded program is yielding a non-zero inferior_pid. * sparc-tdep.c (get_saved_register): Handle window registers in a dummy frame correctly. Sat Apr 27 20:38:32 1996 Fred Fish * Makefile.in (CLIBS): Move $(MMALLOC) past all other libs, so that anything that wants an allocation function not yet pulled in, will get it from mmalloc rather than a system library. * Makefile.in (INSTALLED_LIBS): Reorder to match order of CLIBS, to avoid surprising results when used. Sat Apr 27 00:12:05 1996 Dawn Perchik (dawn@cygnus.com) * stabsread.c: Changes and bug fixes for cfront support. Fix bug for class data members. Fix parsing bug when no base classes exist. Fix memory bug - allocate space for cplusplus specific info. Add support for static data. Add prototypes for static functions. Enhance comments to show what each function expects to parse. Cleanup code. * stabsread.c(resolve_cont),dbxread.c(resolve_cont): Rename function to resolve_cfront_continuation. Fri Apr 26 23:58:26 1996 Jeffrey A Law (law@cygnus.com) * infrun.c (wait_for_inferior): Call registers_changed when restarting the inferior to get over a nullified instruction. Tue Apr 24 12:12:55 1996 Dawn Perchik (dawn@cygnus.com) * dbxread.c,stabsread.c,gdbtypes.c,partial-stab.h,valops.c: Add new support for parsing cfront stabs. Wed Apr 24 00:32:55 1996 Jeffrey A Law (law@cygnus.com) * infrun.c (wait_for_inferior): Move "have_waited" label outside of #ifdef conditionals. Don't trash the wait status if we get a signal and the current instruction is nullified. Mon Apr 22 20:17:01 1996 Fred Fish * Makefile.in (VERSION): Bump version number to 4.16.1. * NEWS: Update for 4.16 release. Mon Apr 22 16:32:29 1996 Stan Shebs * monitor.h: Clean up comment formatting. (current_monitor): Remove decl. (LOADTYPES, LOADPROTOS, INIT_CMD, etc): Remove definitions. (push_monitor, SREC_SIZE): Remove. * monitor.c: Expand old macro into current_monitor derefs everywhere. * remote-os9k.c (current_monitor): Remove definition. Mon Apr 22 14:54:45 1996 Mark Alexander * corefile.c (specify_exec_file_hook): Allow arbitrary number of hooks. (call_extra_exec_file_hooks): New function. * h8300-tdep.c: Lint; add .h files to provide missing declarations, remove unused variables. (set_machine_hook): New function. (_initialize_h8300m): Initialize it. Fri Apr 19 15:03:49 1996 Ian Lance Taylor * remote-mips.c (encoding): Don't specify size, to avoid bug in SunOS native compiler. Thu Apr 18 18:46:57 1996 Stan Shebs * monitor.c: Use int rather than LONGEST for values, since the formatting strings are not prepared to accept long longs. Wed Apr 17 20:17:27 1996 Doug Evans * arm-tdep.c (initialize_arm_tdep): Make apcs32 a `zinteger'. Tue Apr 16 17:38:23 1996 Stu Grossman (grossman@critters.cygnus.com) * corelow.c (add_to_thread_list): Make sure reg_sect is non-null before de-referencing it. Prevents deref of NULL pointer if core file lacks .reg section. * defs.h: Rename floatformat_{to from}_long_double to floatformat_{to from}_doublest. Get rid of FLOATFORMAT_{TO FROM}... macros. * findvar.c (extract_floating store_floating): Change all refs to FLOATFORMAT_{FROM TO}... to floatformat_{from to}_doublest. * utils.c: Change floatformat_{to from}_long_double to floatformat_{to from}_doublest cuz the new routines will use whatever size (double or long double) is appropriate. * config/i960/tm-i960.h (REGISTER_CONVERT_TO_VIRTUAL REGISTER_CONVERT_TO_RAW): Change FLOATFORMAT... macros to floatformat... routine calls. Mon Apr 15 16:34:11 1996 Per Bothner * stabsread.c (read_type): Move handling of '@' from type number handling to handling of types proper (as emitted by gcc!). For typedefs, allocate the typedef type before reading its definition, to properly handling recursive types. Mon Apr 15 11:19:26 1996 Jeffrey A Law (law@cygnus.com) * ch-exp.c (calculate_array_length): Fix prototype. Sat Apr 13 14:21:16 1996 Stu Grossman (grossman@critters.cygnus.com) * remote-nindy.c (nindy_open): Acquire more target state so that user can attach to a previously running program. * (nindy_fetch_registers nindy_store_registers): Get rid of fp conversion code. That's all handled in {extract store}_floating now. * utils.c (floatformat_to_double): Don't bias exponent when handling zero's, denorms or NaNs. * config/i960/tm-i960.h (REGISTER_CONVERT_TO_VIRTUAL REGISTER_CONVERT_TO_RAW): Change to using DOUBLST and FLOATFORMAT_TO/FROM_DOUBLEST macros. * config/i960/tm-nindy960.h: Undefine REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW, and REGISTER_CONVERTIBLE. These are no longer necessary now that all the magic happens in extract/store_floating. Sat Apr 13 02:58:02 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * eval.c (evaluate_subexp_standard): Report error when attempting to evaluate subscripts for types which cannot be subscripted. * valarith.c (value_x_binop, value_x_unop): Add noside parameter. Return a zero value with the return type of the member function if noside is EVAL_AVOID_SIDE_EFFECTS instead of calling the member function. * values.h (value_x_binop, value_x_unop): Update prototypes accordingly. * eval.c (evaluate_subexp_standard): Update all callers of value_x_binop, value_x_unop accordingly. * valarith.c (value_neg, value_complement): Perform ANSI C/C++ integral promotion on operands. Fri Apr 12 13:19:27 1996 Fred Fish * README: Update for 4.16 release. * configure.in (AC_CHECK_FUNCS): Also check for sbrk. * configure: Regenerate with autoconf. * config.in: Regenerate with autoheader. * main.c (main): Only use sbrk() when HAVE_SBRK is defined. * top.c (command_loop): Ditto. Fri Apr 12 09:45:29 1996 Stu Grossman (grossman@critters.cygnus.com) * defs.h: Define TARGET_{FLOAT DOUBLE LONG_DOUBLE}_FORMAT defaults for bi-endian targets. Replace function pointers for floatformat routines with macros. No need for these to be runtime selectable. * findvar.c: Get rid of floatformat function pointers. Use macros in extract_floating and store_floating. * remote-nindy.c (nindy_fetch_registers nindy_store_registers): Use floatformat macros. Thu Apr 11 21:28:02 1996 Fred Fish From: Miles Bader * configure.in (AC_CHECK_HEADERS): check for endian.h. Use AC_CHECK_TOOL to find AR & RANLIB. Add AC_PROG_AWK. Add host & target cases for i[345]86-*-gnu*. * config.in: Regenerate with autoheader. * configure: Regenerate with autoconf. * Makefile.in (AR, AWK): Set from corresponding autoconf substs. (init.c): Don't scan mig-generated files. * defs.h (endian.h): Include if HAVE_ENDIAN_H defined. * config/nm-m3.h (ATTACH_NO_WAIT): Define. * infcmd.c (attach_command): Use "#ifndef ATTACH_NO_WAIT" rather than "#ifndef MACH". Thu Apr 11 18:49:42 1996 Stan Shebs * remote.c (remotewritesize): New GDB variable, controls size of memory packets sent to the target. Thu Apr 11 13:47:52 1996 Stu Grossman (grossman@critters.cygnus.com) * dcache.c: Add prototypes. Make many functions static. * (dcache_peek dcache_fetch dcache_poke): Make dcache_fetch and dcache_poke call dcache_xfer_memory directly in order to fix problems with turning off dcache. dcache_peek is now unnecessary, so it goes away. * defs.h: Define new macros HOST_{FLOAT DOUBLE LONG_DOUBLE}_FORMAT and TARGET_{FLOAT DOUBLE LONG_DOUBLE}_FORMAT to specify a pointer to a struct floatformat. This allows for better handling of targets whose floating point formats differ from the host by more than just byte order. * (floatformat_to_long_double floatformat_from_long_double): Prototypes for new functions in utils.c. * (floatformat_to_doublest floatformat_from_doublest): Prototypes for pointers to floating point conversion functions. The actual function uses either double or long double if the host supports it. * findvar.c (floatformat_to_doublest floatformat_from_doublest): Initialize to point at correct function depending on HAVE_LONG_DOUBLE. * (extract_floating store_floating): Rewrite. Now, if host fp format is the same as the target, we just do a copy. Otherwise, we call floatformat_{to from}_doublest. * remote-nindy.c (nindy_xfer_inferior_memory): Change param `write' to `should_write'. * utils.c (floatformat_to_long_double floatformat_from_long_double): New routines that implement long double versions of functions in libiberty/floatformat.c. * config/i960/tm-i960.h (TARGET_LONG_DOUBLE_FORMAT): Define this for i960 extended real (80 bit) numbers. * nindy-share/nindy.c (ninMemGet ninMemPut): Return number of bytes actually read or written. Wed Apr 10 02:56:06 1996 Wilfried Moser (Alcatel) * ch-valprint.c (chill_val_print): Remove call to calculate_array_length. (calculate_array_length): Move function from here ... * ch-exp.c (calculate_array_length): ... to here. (parse_primval): If we have a symbol with an array type and the length is 0, call calculate_array_length. Tue Apr 9 01:23:05 1996 Wilfried Moser (Alcatel) * eval.c (evaluate_subexp_standard): In case of TYPE_CODE_SET: Add some checks for powerset compatibility. * valops.c (value_slice): Use lowbound instead of lowerbound for call to slice_range_type to get correct bounds. Mon Apr 8 12:53:56 1996 Fred Fish * Makefile.in (scm-exp.o, scm-lang.o, scm-valprint.o): Add targets and dependencies. * scm-lang.c (gdb_string.h): Include. * objfiles.c (add_to_objfile_sections): Cast second arg of obstack_grow call to correct type (char *). * cp-valprint.c (cp_print_static_field): Ditto. * somsolib.c (som_solib_create_inferior_hook): Add a declaration for external find_unwind_entry function (from hppa-tdep.c). * remote-pa.c (remote_write_bytes, remote_read_bytes): Change type of second arg to "char *" to be type compatible with dcache. (remote_wait): Cast second arg to strtol to correct type. * hppa-tdep.c (compare_unwind_entries): Change argument types to "const void *" to be type compatible with qsort, and then assign to local args prior to use. Mon Apr 8 15:35:52 1996 Jeffrey A Law (law@cygnus.com) * infptrace.c (kill_inferior): Remove call to "kill"; update comments. Mon Apr 8 14:05:07 1996 Geoffrey Noer * remote-e7000.c: don't append :23 to target port if __WIN32__ is defined (it's WinGDB). Sun Apr 7 22:34:29 1996 Fred Fish From: Miles Bader * gnu-nat.c, gnu-nat.h, msg.defs, exc_request.defs, i386gnu-nat.c, msg_reply.defs, notify.defs, process_reply.defs, reply_mig_hack.awk, config/nm-gnu.h, config/i386/{i386gnu.mh, i386gnu.mt, nm-gnu.h, m-i386gnu.h, xm-i386gnu.h}: New files for GNU hurd. Sun Apr 7 13:32:41 1996 Fred Fish * configure.in (case host): Add i386sco5 host. * configure: Regenerate. From: Robert Lipe Add support for SCO OpenServer 5 (a.k.a. 3.2v5*) This target is an SVR3.2 with COFF, ELF, and shared libes, but no /proc. * config/i386/i386sco5.mh: New file. * config/i386/nm-i386sco5.h: New file. Sat Apr 6 08:55:22 1996 Fred Fish * bcache.c (bcache): When size of chunk to cache is exactly equal to BCACHE_MAXLENGTH, stash chunk as unique copy. Sat Apr 6 00:46:26 1996 Fred Fish * symfile.c (INLINE_ADD_PSYMBOL): Remove ifdef. (add_psymbol_to_list): Add an arg for passing CORE_ADDR values and use it, rather than calling add_psymbol_addr_to_list. (add_psymbol_addr_to_list): Delete. (add_psymbol_to_list): Make psymbol static to avoid random data in gaps due to alignment of structure members. * symfile.h (INLINE_ADD_PSYMBOL, ADD_PSYMBOL_TO_LIST, ADD_PSYMBOL_ADDR_TO_LIST): Remove. Real world tests show no performance improvements by inlining via complicated macros and they just make gdb larger and harder to maintain. * dwarfread.c (add_enum_psymbol): Replace ADD_PSYMBOL_TO_LIST and/or ADD_PSYMBOL_ADDR_TO_LIST macro(s) with call to add_psymbol_to_list with appropriate long or CORE_ADDR args. (add_partial_symbol): Ditto. * partial-stab.h: Ditto. * os9kread.c (read_os9k_psymtab): Ditto * mdebugread.c (parse_partial_symbols): Ditto. (handle_psymbol_enumerators): Ditto. (demangle.h): Include. * hpread.c (hpread_build_psymtabs): Ditto. (hpread_build_psymtabs): Ditto. (demangle.h): Include start-sanitize-gdbtk Fri Apr 5 13:44:40 1996 Stan Shebs * gdbtk.c (running_now): New global variable. (gdb_cmd): Test it before executing any command. (gdbtk_call_command): Set it when inferior is running. * gdbtk.tcl (gdbtk_tcl_busy, gdbtk_tcl_idle): Enable and disable interaction with command window's text appropriately. Fri Apr 5 13:25:42 1996 Michael Meissner * gdbtk.c (SIOCSPGRP, linux): If on Linux, undef SIOCSPGRP, since some versions of the kernel don't support it. end-sanitize-gdbtk Thu Apr 4 20:16:55 1996 Fred Fish * configure.in: Check for setpgid function. * config.in: Regenerate with autoheader. * configure: Regenerate with autoconf. * inflow.c (_initialize_inflow): Only try to use _SC_JOB_CONTROL if it is actually defined. (gdb_setpgid): Use HAVE_SETPGID. * ch-exp.c: Change include of to "gdb_string.h". * c-exp.y, f-exp.y, m2-exp.y: Ditto. * c-exp.y, serial.c: Include . * config/m68k/nm-news.h: Add typedef for pid_t which is apparently missing from . Enclose entire file in NM_NEWS_H ifndef and define when included. * config/mips/nm-news-mips.h: Ditto. * config/m68k/tm-m68k.h (REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW): Change name of temporary variable. Thu Apr 4 19:04:18 1996 Stan Shebs * arm-xdep.c: Move native-specific code to here from arm-tdep.c. * arm-tdep.c (arm_apcs_32): New global. (arm_addr_bits_remove, arm_saved_pc_after_call, arm_push_dummy_frame, arm_pop_frame): New functions. (arm_skip_prologue): Updated version from Richard Earnshaw. (_initialize_arm_tdep): Add set/show "apcs32". * config/arm/tm-arm.h (ADDR_BITS_REMOVE): Call arm_addr_bits_remove. (SAVED_PC_AFTER_CALL): Call arm_saved_pc_after_call. (frame_find_saved_regs): Declare properly. (PUSH_DUMMY_FRAME): Call arm_push_dummy_frame. (POP_FRAME): Call arm_pop_frame, use ADDR_BITS_REMOVE instead of explicit mask. * config/arm/nm-arm.h: New file. * config/arm/xm-arm.h (KERNEL_U_ADDR, FETCH_INFERIOR_REGISTERS): Move definitions to nm-arm.h. * config/arm/arm.mh (NAT_FILE): Define. * symfile.c (generic_load): Initialize data_count properly. Thu Apr 4 17:17:53 1996 Fred Fish * symmisc.c (print_objfile_statistics): Print memory used by psymbol cache obstack. Thu Apr 4 15:43:07 1996 Stan Shebs * symfile.c (report_transfer_performance): New function. (generic_load): Call it to report transfer rate. * remote-e7000.c (e7000_load): Ditto. Mon Apr 1 16:31:00 1996 Stan Shebs * mpw-make.sed: Change references to config.h to be in objdir, edit out rules to rebuild config.h. Mon Apr 1 08:32:23 1996 Fred Fish * hppa-tdep.c (hppa_pop_frame): Call clear_proceed_status before proceeding. Sun Mar 31 16:15:43 1996 Fred Fish * hppah-nat.c (store_inferior_registers, store_inferior_registers, fetch_register, child_xfer_memory): Use call_ptrace function supplied by infptrace.c rather than calling ptrace directly. Sun Mar 31 15:39:00 1996 Stan Shebs * mon960-rom.c: Cleanups and elimination of unused code, clarify documentation string. (mon960_serial, mon960_ttyname): Remove. * config/i960/tm-mon960.h (ADDITIONAL_OPTIONS, ADDITIONAL_OPTION_CASES, ADDITIONAL_OPTION_HELP): Remove. Sat Mar 30 11:00:22 1996 Fred Fish * configure.in: Check whether printf family supports printing long doubles or not and define PRINTF_HAS_LONG_DOUBLE if so. * acconfig.h: Provide default undef for PRINTF_HAS_LONG_DOUBLE. * configure: Regenerate. * valprint.c (print_floating): Use PRINTF_HAS_LONG_DOUBLE. * c-exp.y (parse_number): Use PRINTF_HAS_LONG_DOUBLE. * configure.in: Fix have_gregset and have_fpregset autoconf variable names so that they match the pattern required to cache them. Fri Mar 29 21:39:56 1996 Fred Fish * core-aout.c (fetch_core_registers): Cast core_reg_size to int before testing against reg_ptr. * eval.c (evaluate_subexp_standard): Cast type of TYPE_FN_FIELD_VOFFSET to int. * findvar.c (extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer): Cast type of sizeof to int. * values.c (unpack_field_as_long, modify_field): Ditto. * valops.c (value_assign, call_function_by_hand): Ditto. * infcmd.c (do_registers_info): Ditto. * ser-tcp.c (tcp_open): Ditto. * remote.c (putpkt): Ditto. * dcache.c (dcache_peek): Ditto. * dcache.c (dcache_poke): Ditto. * m2-exp.y (yylex): Ditto. * gnu-regex.c (re_match_2): Ditto. * f-lang.c (ADD_BF_SYMNUM, saved_bf_list_end, tmp_bf_ptr): Ifdef out unused macro definition and variables. * inftarg.c (proc_wait): Move from main.c to here, and make static. * valprint.c (val_print_string): Change bufsize from int to unsigned. * main.c (wait.h): Include. * top.c (command_line_input): Remove unused variable "c". * f-typeprint.c (f_type_print_varspec_prefix): Add missing enum value TYPE_CODE_TYPEDEF to switch statement. (f_type_print_varspec_suffix): Add missing enum value TYPE_CODE_TYPEDEF to switch statement. * ch-exp.c (parse_primval): Add remaining enumeration values to switch statement, with no specific action. (ch_lex): Add LOC_UNRESOLVED in switch statement. (pushback_token): Ifdef out, since code using it is ifdef'd out. * stabsread.c (cleanup_undefined_types): Remove unused label "badtype". * objfiles.h (print_symbol_bcache_statistics): Add prototype. * maint.c (objfiles.h): Include. (maintenance_print_statistics): Remove unused variable "temp". * minsyms.c (lookup_minimal_symbol_solib_trampoline): Remove unused variable "found_file_symbol". * m2-exp.y (yylex): Add LOC_UNRESOLVED case to switch. * language.c (lang_bool_type): Use existing function local type variable rather than create block local variables. * solib.c (disable_break): Enclose in ifndef SVR4_SHARED_LIBS. * infptrace.c (wait.h, command.h): Include. * ser-tcp.c (gdb_string.h): Include * i386-tdep.c (codestream_seek): Change "place" to CORE_ADDR. (i386_get_frame_setup): Change "pc" from int to CORE_ADDR. * command.c (complete_on_enum): Make assignment used as truth value explictly check against NULL. (wait.h): Include. * infrun.c (wait_for_inferior): Ifdef out prologue_pc since code that uses it is ifdef'd out. * parser-defs.h: Add prototype for write_dollar_variable. * infrun.c: Add prototype for write_pc_pid. * breakpoint.h: Add prototype for re_enable_breakpoints_in_shlibs. * symmisc.c (bcache.h): Include. * bcache.h: Add prototype for print_bcache_statistics. * symfile.c: Include . * printcmd.c (print_scalar_formatted): Change len to unsigned int. * valarith.c (value_equal): Cast result of TYPE_LENGTH to int. * valarith.c (value_binop): Change result_len, promoted_len1, and promoted_len2 to unsigned int. * valarith.c (value_subscripted_rvalue): Change elt_offs and elt_size to unsigned int. * valops.c (value_array): Change typelength to unsigned int. (destructor_name_p): Change len to unsigned int. * scm-lang.h (scm_parse): Add prototype for scm_unpack. * symfile.c (decrement_reading_symtab): Change return type to void. * valarith.c (value_subscript): Remove unused variable "word". (value_subscript): Remove unused variable "tint". * valops.c (auto_abandon): Ifdef out, since code using it is also ifdef'd out. * eval.c (init_array_element): Remove unused variable "val". * Makefile.in (values.o): Depends on scm-lang.h. (command.o): Depends upon wait_h. (ser-tcp.o): Depends upon gdb_string.h. (infptrace.o): Depends upon wait_h and command_h. (maint.o): Depends on objfiles.h and symfile.h. * values.c (allocate_repeat_value): Remove unused variable "element_type". (scm-lang.h): Include. * breakpoint.c (create_longjmp_breakpoint): Enclose in GET_LONGJMP_TARGET define, unused otherwise. * config/i386/nm-linux.h: Add prototypes for i386_insert_watchpoint, i386_remove_watchpoint and i386_stopped_by_watchpoint. Thu Mar 28 12:53:19 1996 Doug Evans * configure.in (sparc64-*-solaris2*): Delete. Stick with sparc-*-solaris2*. * configure: Regenerated. Thu Mar 28 06:51:26 1996 Fred Fish * valops.c (value_assign): Make copy of internal variable value before returning it as a new value, since it is owned by the internal variable and will be freed along with it. Wed Mar 27 08:36:17 1996 Jeffrey A Law (law@cygnus.com) * From Peter Schauer. * breakpoint.c (breakpoint_re_set_one): Keep temporary breakpoints bp_until, bp_finish, bp_watchpoint_cope, bp_call_dummy and bp_step_resume in case breakpoint_re_set_one is called due to a step over a dlopen call. * infrun.c (wait_for_inferior): Always remove breakpoints from inferior in BPSTAT_WHAT_CHECK_SHLIBS case. Tue Mar 26 13:15:32 1996 Fred Fish * config/mips/tm-mips.h (COERCE_FLOAT_TO_DOUBLE): Only prefer non-prototyped case over prototyped case for C. * config/pa/tm-hppa.h (COERCE_FLOAT_TO_DOUBLE): Ditto. Sat Mar 23 17:24:28 1996 Fred Fish * os9kread.c (os9k_process_one_symbol): Note nonportable assumption that an int can hold a char *. * bcache.h (struct hashlink): Wrap data[] inside union with double to force longest alignment. (BCACHE_DATA): New macro to access data[]. (BCACHE_ALIGNMENT): New macro to get offset to data[]. * bcache.c (lookup_cache, bcache): Use BCACHE_DATA to get address of cached data. Use BCACHE_ALIGNMENT to compute amount of space to allocate for each hashlink struct. Sat Mar 23 12:14:02 1996 Fred Fish * ch-lang.c (evaluate_subexp_chill): Fix typo. Thu Mar 21 08:27:19 1996 Fred Fish * Makefile.in (VERSION): Bump version to 4.15.3 Thu Mar 21 10:56:41 1996 Ian Lance Taylor * config.in: Rename from config.h.in. * configure.in: Call AC_CONFIG_HEADER with config.h:config.in. Change CONFIG_HEADERS test in AC_OUTPUT accordingly. * configure: Rebuild. * Makefile.in (stamp-h): Depend upon config.in, not config.h.in. Set CONFIG_HEADERS to config.h:config.in. Tue Mar 19 12:47:51 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * partial-stab.h (case N_ENDM): Finish current partial symbol table for Solaris 2 cc. Tue Mar 19 10:39:15 1996 Jeffrey A Law (law@cygnus.com) * rs6000-nat.c (exec_one_dummy_insn): Don't clobber the PC in the registers array. From Peter Schauer. Mon Mar 18 13:47:09 1996 Fred Fish * symfile.c (reread_symbols): Reinitialize bcache struct members to zero using memset. Also use memset to reinit global_psymbols and static_psymbols, rather than explicitly resetting each structure member. Sat Mar 16 19:47:36 1996 Fred Fish * configure.in: Add fragment to create stamp-h. From Peter Schauer * configure.in (AC_CHECK_HEADERS): Check for link.h. * configure: Regenerate with autoconf. * config.h.in: Regenerate with autoheader. * config/i386/nm-linux.h: Include solib.h only if HAVE_LINK_H is defined. * solib.c: Exclude most of the code if HAVE_LINK_H is not defined. * config/i386/linux.mh: Reinstate XM_CLIBS, it is needed for older a.out based systems. Sat Mar 16 16:45:43 1996 Fred Fish * config.h.in: New file. * acconfig.h: New file, for autoheader. * configure.in (AC_CONFIG_HEADER): Add, generate config.h. * configure: Regenerate. * Makefile.in (defs_h): Add config.h (distclean): Remove config.h and stamp-h during distclean. (config.h, stamp-h): New targets to remake config.h when necessary. * defs.h (config.h): Include before any other includes or defines. * i386-tdep.c (gdb_string.h): Move include after include of defs.h. * i386v4-nat.c (defs.h): Include before testing HAVE_SYS_PROCFS_H. Sat Mar 16 14:55:27 1996 Fred Fish From Peter Schauer * Makefile.in (INSTALLED_LIBS): Make sure that @LIBS@ will not result in an empty line, to work around a bug in native Ultrix 4.4 and OSF/1-3.2C make. Sat Mar 16 13:33:17 1996 Fred Fish * configure.in: Add gdbserver to configdirs under linux. * configure: Regenerate. Fri Mar 15 12:06:58 1996 J.T. Conklin * config/i386/nm-nbsd.h (FLOAT_INFO): Comment out. * config/i386/tm-nbsd.h (NUM_REGS): Define. Thu Mar 14 10:31:18 1996 Jeffrey A Law (law@cygnus.com) * solib.c (solib_break_names): Add _r_debug_state for vanilla SVR4 implementations. From Peter Schauer. Mon Mar 11 14:24:57 1996 Dawn Perchik * mon960-rom.c: New file; support mon960 rom monitor on i960. * monitor.c (monitor_debug): Change remotedebug to buffer strings. * monitor.c (monitor_open): Add test for flag MO_NO_ECHO_ON_OPEN before epecting prompt and echo during open. * monitor.c (monitor_stop): Add test for flag MO_SEND_BREAK_ON_OPEN to determine if break should be sent as stop command. * monitor.h: Add flags MO_NO_ECHO_ON_OPEN and MO_SEND_BREAK_ON_OPEN. * i960-tdep.c (mon960_frame_chain_valid): New function for getting stack frame on mon960. * Makefile.in: Add mon960 files. * configure.in: Changed i960-*-coff* and i960-*-elf* to target mon960; added i960-nindy-coff* and i960-nindy-elf* for target nindy. * configure: Regenerated. * config/i960/mon960.mt, config/i960/tm-mon960.h: New files; support mon960 rom monitor on i960. Mon Mar 11 11:02:47 1996 Steve Chamberlain With Michael Snyder: * i386-tdep.c (skip_trampoline_code): Fix strncmp length. * win32-nat.c (CHECK, DEBUG*, debug_*): New. (handle_load_dll): Don't reload symbols. (handle_exception): Use the DEBUG_* names. (child_wait): Add DEBUG_* code. (_initialize_inftarg): Add new commands to set debug_ names. Mon Mar 11 09:19:58 1996 Jeffrey A Law (law@cygnus.com) * From Peter Schauer: * breakpoint.c (insert_breakpoints): Use ALL_BREAKPOINTS_SAFE. (bpstat_stop_status): Likewise. (remove_solib_event_breakpoints): Likewise. (clear_momentary_breakpoints): Likewise. (re_enable_breakpoints_in_shlibs): Don't reenable a breakpoint if we still can't read the memory for that breakpoint. (mention): Add bp_shlib_event case to keep gcc quiet. Fri Mar 8 12:08:12 1996 Jeffrey A Law (law@cygnus.com) * breakpoint.h (enum enable): New enum shlib_disabled for shared library breakpoints that have been temporarily disabled. * breakpoint.c: Handle temporarily disabled shared library breakpoints like disabled breakpoints in most places. (insert_breakpoints): Use shlib_disabled to indicate that an unsettable breakpoint is only temporarily disabled. (re_enable_breakpoints_in_shlibs): New function. * corelow.c (solib_add_stub): After adding shared libraries, try to reenable any temporarily disabled breakpoints. * infcmd.c (attach_command): Likewise. * infrun.c (wait_for_inferior): Likewise. Fri Mar 8 11:41:25 1996 Ian Lance Taylor * defs.h (extract_long_unsigned_integer): Declare. * findvar.c (extract_long_unsigned_integer): New function. * printcmd.c (print_scalar_formatted): Use it. * valprint.c (val_print_type_code_int): Likewise. Thu Mar 7 17:40:50 1996 Stan Shebs * infcmd.c (do_registers_info): Ignore anonymous registers. * sh-tdep.c (set processor): New command to set specific processor type. (sh_reg_names, sh3_reg_names): Arrays of register names for SH and SH3 processors. (sh_set_processor_type): New function. * sh3-rom.c (sh3_open): Call it. (sh3_regname): Add names of all the bank registers. (sh3_supply_register): Clean up formatting. * config/sh/tm-sh.h (NUM_REGS, NUM_REALREGS): Increase to include bank registers. (REGISTER_NAMES): Add names of bank registers. (FP15_REGNUM): Define. (REGISTER_VIRTUAL_TYPE): Use it. * monitor.c: Clean up some comments. Thu Mar 7 12:09:51 1996 J.T. Conklin * i386b-nat.c: Revert part of Mar 5 change. FreeBSD collapsed the s* and t* symbols too. Thu Mar 7 15:18:51 1996 James G. Smith * symfile.c (generic_load): Avoid division by zero. Wed Mar 6 17:57:59 1996 Jeffrey A Law (law@cygnus.com) * breakpoint.c (bfd_lookup_symbol): Provide for all SVR4 systems, not just those with HANDLE_SVR4_EXEC_EMULATORS. From Peter Schauer: * breakpoint.c (internal_breakpoint_number): Move to file scope. (create_solib_event_breakpoint): Use an internal breakpoint number. Wed Mar 6 00:32:44 1996 Wilfried Moser (Alcatel) * valarith.c (value_in): Change builtin_type_chill_bool to LA_BOOL_TYPE. Tue Mar 5 23:48:36 1996 Wilfried Moser (Alcatel) * ch-exp.c (parse_primval): Handle CARD, MAX, MIN. (match_string_literal): Handle control sequence. (match_character_literal): Deto. * ch-lang.c (chill_printchar): Change formating of nonprintable characters from C'xx' to ^(num). (chill_printstr): Deto. (value_chill_card, value_chill_max_min): New functions to process Chill's CARD, MAX, MIN. (evaluate_subexp_chill): Process UNOP_CARD, UNOP_CHMAX, UNOP_CHMIN. * expression.h (exp_opcode): Add UNOP_CARD, UNOP_CHMAX, UNOP_CHMIN for Chill's CARD, MAX, MIN. * valarith.c (value_in): Add processing of TYPE_CODE_RANGE and change return type from builtin_type_int to builtin_type_chill_bool. Tue Mar 5 18:54:04 1996 Stan Shebs * config/nm-nbsd.h (link_object, lo_name, etc): Move to here from config/nm-nbsd.h. * config/sparc/nm-nbsd.h (regs, fp_status, etc): Move to here from config/sparc/tm-nbsd.h. * config/m68k/nm-hp300hpux.h (FIVE_ARG_PTRACE): Define here instead of in config/m68k/xm-hp300hpux.h. Tue Mar 5 12:05:35 1996 J.T. Conklin * i386b-nat.c, m68knbsd-nat.c (fetch_core_registers): Provide implementation for NetBSD systems. Mon Mar 4 23:44:16 1996 Per Bothner * valarith.c (binop_user_defined_p): Return 0 for BINOP_CONCAT. (value_concat): Handle varying strings (add COERCE_VARYING_ARRAY). * ch-lang.c (evaluate_subexp_chill case MULTI_SUBSCRIPT): Error if "function" is pointer to non-function. Mon Mar 4 17:47:03 1996 Stan Shebs * top.c (print_gdb_version): Update copyright year. Mon Mar 4 14:44:54 1996 Jeffrey A Law (law@cygnus.com) From Peter Schauer: * infrun.c (wait_for_inferior): Remove breakpoints and switch terminal settings before calling SOLIB_ADD. * solib.c (enable_break, SVR4 variant): Don't map in symbols for the dynamic linker, the namespace pollution causes real problems. Sun Mar 3 17:18:57 1996 James G. Smith * remote-mips.c (common_breakpoint): Explicitly terminate the returned buffer. Wed Feb 28 22:32:18 1996 Stan Shebs From Wilfried Moser : * remote.c (remote_detach): Send a command 'D' to the target when detaching, update the function's comments. Wed Feb 28 15:50:12 1996 Fred Fish * Makefile.in (VERSION): Bump version to 4.15.2 to establish baseline for gdb 4.16 rerelease testing. Wed Feb 28 13:32:05 1996 Jeffrey A Law (law@cygnus.com) * somsolib.c (som_solib_create_inferior_hook): Before returning call clear_symtab_users. Tue Feb 27 00:04:46 1996 Stu Grossman (grossman@critters.cygnus.com) * remote-e7000.c (e7000_open): Delete all breakpoints when connecting to e7000. Change connect message to allow use of monitor.exp in test suite. * (e7000_load): Print transfer rate of download. * symfile.c (generic_load): Print transfer rate of download. Sun Feb 25 13:58:33 1996 Stan Shebs * configure.in (mips*-*-vxworks*): New config. * configure: Regenerated. * config/mips/vxmips.mt, config/mips/tm-vxmips.h: New files. * remote-vxmips.c (vx_convert_to_virtual, vx_convert_from_virtual): Remove, never used. Sat Feb 24 12:30:28 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * partial-stab.h (case N_FUN): Function symbols generated by SPARCworks cc have a meaningless zero value, do not update pst->textlow if the function symbol value is zero. * stabsread.c (define_symbol): Initialize SYMBOL_TYPE field for function prototype declaration symbols. Fri Feb 23 22:33:04 1996 Stu Grossman (grossman@critters.cygnus.com) * remote-e7000.c (e7000_load): New routine to download via the network. * (e7000_wait): Don't backup PC when we hit a breakpoint. Apparantly new sh2 pods get this right... * (e7000_ops): Add call to e7000_load. Thu Feb 22 00:52:42 1996 J.T. Conklin * config/m68k/{nbsd.mh,nbsd.mt,nm-nbsd.h,tm-nbsd.h,xm-nbsd.h}, m68knbsd-nat.c: New files, support for NetBSD/m68k. * configure.in (m68k-*-netbsd*): New config. * configure: Regenerated. Wed Feb 21 19:00:21 1996 Fred Fish * standalone.c (open, _initialize_standalone): Fix obvious typos reported by Martin Pool . Wed Feb 21 14:24:04 1996 Jeffrey A Law (law@cygnus.com) * solib.c (solib_create_inferior_hook): Fix thinko. Tue Feb 20 23:59:19 1996 Jeffrey A Law (law@cygnus.com) * solib.c (solib_break_names): Define for Solaris and Linux. (enable_break): For SVR4 systems, first try to use the debugger interfaces in the dynamic linker to track shared library events as they happen, then fall back to BKPT_AT_SYMBOL code. Convert BKPT_AT_SYMBOL code to use shared library event breakpoints. (solib_create_inferior_hook): Simplify BKPT_AT_SYMBOL code, it no longer needs to restart/wait on the inferior. * symfile.c (find_lowest_section): No longer static. * symfile.h (find_lowest_section): Corresponding changes. Tue Feb 20 18:54:08 1996 Fred Fish * valops.c (COERCE_FLOAT_TO_DOUBLE): Define default value. (value_arg_coerce): Use COERCE_FLOAT_TO_DOUBLE. * config/alpha/tm-alpha.h (COERCE_FLOAT_TO_DOUBLE): Define to 1. * config/mips/tm-mips.h: Ditto. * config/pa/tm-hppa.h: Ditto. * config/rs6000/tm-rs6000.h: Ditto. * config/sparc/tm-sparc.h: Ditto. Tue Feb 20 17:32:05 1996 J.T. Conklin * config/{i386,ns32k}/nbsd.mh (NATDEPFILES): Remove core-aout.o. * config/nm-nbsd.h (FETCH_INFERIOR_REGISTERS): Defined. * config/xm-nbsd.h (CC_HAS_LONG_LONG, PRINTF_HAS_LONG_LONG): #ifdef'd out definitions --- Causes serious gdb failures on the i386. Need to investigate further before enabling. * i386b-nat.c (fetch_inferior_registers, store_inferior_registers, fetch_core_registers): New functions. These functions are defined if FETCH_INFERIOR_REGISTERS is set. Registers are fetched/stored with ptrace PT_GETREGS/PT_SETREGS. Tue Feb 20 16:55:06 1996 Stu Grossman (grossman@critters.cygnus.com) * findvar.c (extract_floating store_floating): Replace `long double' with `DOUBLEST'. Mon Feb 19 15:25:51 1996 J.T. Conklin * config/xm-nbsd.h (CC_HAS_LONG_LONG, PRINTF_HAS_LONG_LONG): Define. Mon Feb 19 10:32:05 1996 Jeffrey A Law (law@cygnus.com) * symtab.h (looup_minimal_symbol_solib_trampoline): Declare. * breakpoint.h (remove_solib_event_breakpoints): Declare. * breakpoint.c (remove_solib_event_breakpoints): New function. * somsolib.c (solib_create_inferior_hook): Remove all solib event breakpoints before inserting any new ones. Use a solib event breakpoint for the breakpoint at "_start". Remove extraneous "\n" from calls to warning. * breakpoint.c (breakpoint_1): Add missing "sigtramp" to bptypes name array. Mon Feb 19 01:09:32 1996 Doug Evans * dwarfread.c (add_partial_symbol): Use ADD_PSYMBOL_ADDR_TO_LIST for CORE_ADDR values. (new_symbol): Use SYMBOL_VALUE_ADDRESS for CORE_ADDR values. * symfile.h (add_psymbol_{,addr}to_list): Add prototypes. Sun Feb 18 14:37:13 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * mipsread.c (mipscoff_symfile_read): Unconditionally add alpha coff dynamic symbols for all symbol files. Makes skipping over the trampoline code work when stepping from a function in a shared library into a function in a different shared library. Sun Feb 18 09:27:10 1996 Stu Grossman (grossman@cygnus.com) * config/sparc/tm-sparc.h: Define PS_FLAG_CARRY. Define RETURN_VALUE_ON_STACK to return long doubles on the stack. Sat Feb 17 16:33:11 1996 Fred Fish * Makefile.in (ch-exp.o): Add dependencies. (various): Add gdb_string.h to dependencies that need it. Sat Feb 17 08:57:50 1996 Fred Fish * symmisc.c (print_symbol_bcache_statistics): Update description for printing byte cache statistics. Thu Feb 16 16:02:03 1996 Stu Grossman (grossman@cygnus.com) * Add native support for long double data type. * c-exp.y (%union): Change dval to typed_val_float. Use DOUBLEST to store actual data. Change types of INT and FLOAT tokens to typed_val_int and typed_val_float respectively. Create new token DOUBLE_KEYWORD to specify the string `double'. Make production for FLOAT use type determined by parse_number. Add production for "long double" data type. * (parse_number): Use sscanf to parse numbers as float, double or long double depending upon the type of typed_val_float.dval. Also allow user to specify `f' or `l' suffix to explicitly specify float or long double constants. Change typed_val to typed_val_int. * (yylex): Change typed_val to typed_val_int. Also, scan for "double" keyword. * coffread.c (decode_base_type): Add support for T_LNGDBL basic type. * configure, configure.in: Add check for long double support in the host compiler. * defs.h: Define DOUBLEST appropriatly depending on whether HAVE_LONG_DOUBLE (from autoconf) is defined. Also, fix prototypes for functions that handle this type. * expression.h (union exp_element): doubleconst is now type DOUBLEST. * m2-exp.y f-exp.y (%union): dval becomes type DOUBLEST. * findvar.c (extract_floating): Make return value be DOUBLEST. Also, add support for numbers with size of long double. * (store_floating): Arg `val' is now type DOUBLEST. Handle all floating types. * parser-defs.h parse.c (write_exp_elt_dblcst): Arg expelt is now DOUBLEST. * valarith.c (value_binop): Change temp variables v1, v2 and v to type DOUBLEST. Coerce type of result to long double if either op was of that type. * valops.c (value_arg_coerce): If argument type is bigger than double, coerce to long double. * (call_function_by_hand): If REG_STRUCT_HAS_ADDR is defined, and arg type is float and > 8 bytes, then use pointer-to-object calling conventions. * valprint.c (print_floating): Arg doub is now type DOUBLEST. Use appropriate format and precision to print out floating point values. * value.h: Fixup prototypes for value_as_double, value_from_double, and unpack_double to use DOUBLEST. * values.c (record_latest_value): Remove check for invalid floats. Allow history to store them so that people may examine them in hex if they want. * (value_as_double unpack_double): Change return value to DOUBLEST. * (value_from_double): Arg `num' is now DOUBLEST. * (using_struct_return): Use RETURN_VALUE_ON_STACK macro (target specific) to expect certain types to always be returned on the stack. Fri Feb 16 14:00:54 1996 Fred Fish * bcache.c, bcache.h: New files to implement a byte cache. * Makefile.in (SFILES): Add bcache.c. (symtab_h): Add bcache.h. (HFILES_NO_SRCDIR): add bcache.h (COMMON_OBJS): Add bcache.o (bcache.o): New target. * dbxread.c (start_psymtab): Make global_syms & static_syms type "partial_symbol **". * hpread.c (hpread_start_symtab): Ditto. * os9kread.c (os9k_start_psymtab): Ditto. * stabsread.h (start_psymtab): Ditto. * {symfile.c, symfile.h} (start_psymtab_common): Ditto. * maint.c (maintenance_print_statistics): Call print_symbol_bcache_statistics. * objfiles.c (allocate_objfile): Initialize psymbol bcache malloc and free pointers. * solib.c (allocate_rt_common_objfile): Ditto. * symfile.c (reread_symbols): Ditto. (free_objfile): Free psymbol bcache when objfile is freed. (objfile_relocate): Use new indirect psymbol pointers. * objfiles.h (struct objfile): Add psymbol cache. * symfile.c (compare_psymbols): Now passed pointers to pointers to psymbols. (reread_symbols): Free psymbol bcache when freeing other objfile resources. (add_psymbol_to_list, add_psymbol_addr_to_list): Initialize new psymbol using the psymbol bcache. (init_psymbol_list): Psymbol lists now contain pointers rather than the actual psymbols. * symfile.h (psymbol_allocation_list): Psymbol lists now dynamically grown arrays of pointers. (ADD_PSYMBOL_VT_TO_LIST): Initialize new symbol using the psymbol bcache. * symmisc.c (print_partial_symbols): Now takes pointer to pointer to partial symbol. (print_symbol_bcache_statistics): New function to print per objfile bcache statistics. (print_partial_symbol, print_partial_symbols, maintenance_check_symtabs, extend_psymbol_list): Account for change to pointer to pointer to partial symbol. * symtab.c (find_pc_psymbol, lookup_partial_symbol, decode_line_2, make_symbol_completion_list): Account for change to pointer to pointer to partial symbol. * symtab.h (bcache.h): Include. * xcoffread.c (xcoff_start_psymtab): Make global_syms & static_syms type "partial_symbol **". Fri Feb 16 10:02:34 1996 Fred Fish * dwarfread.c (free_utypes): New function. (read_file_scope): Call free_utypes as cleanup, rather than just freeing the utypes pointer. Thu Feb 15 21:40:52 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * demangle.c (is_cplus_marker): New function, checks if a character is one of the commonly used C++ marker characters. * defs.h (is_cplus_marker): Add prototype. * c-typeprint.c (c_type_print_base), ch-lang.c (chill_demangle), cp-valprint.c (cp_print_class_method), mdebugread.c (parse_symbol), stabsread.c (define_symbol, read_member_functions, read_struct_fields), symtab.h (OPNAME_PREFIX_P, VTBL_PREFIX_P, DESTRUCTOR_PREFIX_P), values.c (vb_match): Use is_cplus_marker instead of comparison with CPLUS_MARKER. Thu Feb 15 18:08:13 1996 Fred Fish * symfile.h (INLINE_ADD_PSYMBOL): Default this to 0 and possibly delete entirely someday. Thu Feb 15 15:25:34 1996 Stan Shebs * mpw-make.sed: Edit out makefile rebuild rule. (host_alias, target_alias): Comment out instead of deleting. (@LIBS@): Edit out references. Tue Feb 13 22:56:46 1996 Fred Fish * symfile.c (add_psymbol_to_list, add_psymbol_addr_to_list): Use n_psyms in OBJSTAT, not psyms. Mon Feb 12 15:59:31 1996 Doug Evans * configure.in (sparclet-*-aout*): New config. * configure: Regenerated. Mon Feb 12 14:17:52 1996 Fred Fish * somsolib.c (som_solib_add): Use xmalloc rather than bare unchecked call to malloc. * remote-mips.c (pmon_load_fast): ditto. * remote-mm.c (mm_open): ditto. * hpread.c (hpread_lookup_type): ditto. * remote-adapt.c (adapt_open): ditto. Mon Feb 12 13:11:32 1996 Fred Fish * f-lang.c (allocate_saved_bf_node, allocate_saved_function_node, allocate_saved_f77_common_node, allocate_common_entry_node, add_common_block): Use xmalloc rather than malloc, some of which were unchecked. * gnu-regex.c: At same point as other gdb specific changes #undef malloc and then #define it to xmalloc. * ch-exp.c (growbuf_by_size): Use xmalloc/xrealloc rather than bare unchecked calls to malloc/realloc. * stabsread.c (dbx_lookup_type): Use xmalloc rather than bare unchecked call to malloc. Wed Feb 7 11:31:26 1996 Stu Grossman (grossman@cygnus.com) * symtab.c (gdb_mangle_name): Change opname var to be const to match return val of cplus_mangle_name. * i960-tdep.c: Change arg types of next_insn to match callers. Wed Feb 7 07:34:24 1996 Fred Fish * config/i386/linux.mh (XM_CLIBS, GDBSERVER_LIBS): Remove. These apparently aren't needed in any reasonably recent version of linux. Tue Feb 6 21:37:03 1996 Per Bothner * stabsread.c (read_range_type): If !self-subrange and language is Chill, assume a true range. If a true_range is a sub_subrange, use builtin_type_int for index_type. Tue Feb 6 18:38:51 1996 J.T. Conklin * nindy-share/nindy.c (say): Use stdarg.h macros when compiling with an ANSI compiler. start-sanitize-gdbtk Tue Feb 6 16:31:25 1996 Tom Tromey * gdbtk.tcl (create_file_win): Eliminate text widget B1 binding so double-clicking will work again. (create_asm_win): Put "break" at end of all B1 bindings. (create_file_win): Lower "sel" tag, don't raise it. (ensure_line_visible): New proc. (update_listing, update_assembly): Use it. (create_copyright_window): Destroy window on Leave event. (create_command_window): Put "break" at end of all B2 bindings. end-sanitize-gdbtk Mon Feb 5 18:24:28 1996 Steve Chamberlain From Michael_Snyder@NeXT.COM (Michael Snyder): * valops.c (value_arg_coerce): Coerce float to double, unless the function prototype specifies float. Mon Feb 5 09:51:55 1996 Tom Tromey * language.c (set_language_command): Use languages table when printing available languages. Sat Feb 3 12:22:05 1996 Fred Fish Fix problems reported by Hans Verkuil (hans@wyst.hobby.nl): * command.c (add_cmd): Add missing initialization for enums member. Reorder members to match structure declaration to make it easier to tell when one is missing. * exec.c (exec_file_command): Fix problem where filename in malloc'd memory is referenced after being freed. Sat Feb 3 03:26:21 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * dwarfread.c (read_func_scope): Avoid GDB core dumps if AT_name tag is missing. * procfs.c (procfs_stopped_by_watchpoint): Fix logic when FLTWATCH and FLTKWATCH are defined. * remote.c (remote_read_bytes): Advance memaddr for transfers, return number of bytes transferred for partial reads. * top.c (init_signals): Reset SIGTRAP to SIG_DFL. Fri Feb 2 13:40:50 1996 Steve Chamberlain * win32-nat.c (mappings): Add ppc registers. (child_resume): Turn off step for ppc. Thu Feb 1 10:29:31 1996 Steve Chamberlain * config/powerpc/(cygwin32.mh, cygwin32.mt, tm-cygwin32.h, xm-cygwin32.h): New. * config/i386/(*win32*): Becomes *cygwin32*. * configure.in (i[3456]86-*-win32*): Becomes i[3456]86-*-cygwin32. (powerpcle-*-cygwin32): New. * configure: Regenerate. * win32-nat.c (child_create_inferior): Call CreateProcess with the right program arg. Thu Feb 1 11:01:10 1996 Jeffrey A Law (law@cygnus.com) * config/pa/tm-hppa.h (SOFT_FLOAT): Provide a default definition. Wed Jan 31 19:01:28 1996 Fred Fish * serial.c: Change fputc/fputs/fprintf to _unfiltered forms. Wed Jan 31 18:36:27 1996 Stan Shebs * config/sparc/xm-sun4os4.h (HAVE_TERMIOS): Remove. * config/sparc/xm-sparc.h (HAVE_WAIT_STRUCT): Remove, never used. * config/i386/nm-i386mach.h (CHILD_PREPARE_TO_STORE): Move to here from config/i386/xm-i386mach.h, fix name. * config/i386/nm-sun386.h: Ditto, from config/i386/xm-sun386.h. * config/i386/nm-ptx4.h (CHILD_PREPARE_TO_STORE): Move to here from config/i386/xm-ptx4.h. * config/i386/nm-ptx4.h: Ditto, from config/i386/xm-ptx.h. * config/i386/nm-symmetry.h: Ditto, from config/i386/xm-symmetry.h. * config/m68k/nm-sun3.h: Ditto, from config/m68k/xm-sun3.h. * config/sparc/nm-nbsd.h: Ditto, from config/sparc/xm-nbsd.h. * config/sparc/nm-sun4os4: Ditto, from config/sparc/xm-sparc.h. * config/sparc/nm-sun4sol2.h: New file, renamed from nm-sysv4.h. (PRSVADDR_BROKEN): Move here from xm-sun4sol2.h. * config/sparc/sun4sol2.mh (NAT_FILE): Update. Wed Jan 31 17:20:26 1996 Jeffrey A Law (law@cygnus.com) * config/pa/tm-hppa.h (EXTRACT_RETURN_VALUE): Handle software floating point correctly. (STORE_RETURN_VALUE): Likewise. * config/pa/tm-pro.h (SOFT_FLOAT): define. Wed Jan 31 13:34:52 1996 Fred Fish * config/i386/xm-linux.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): Define to what should be reasonable values. However, apparently a bug in linux mmap prevents mapped symbol tables from working. Tue Jan 30 18:26:19 1996 Fred Fish * defs.h (errno.h>: Move #include closer to head of file to solve obscure problem with systems that declare perror with const arg, in both errno.h and stdio.h, and const is defined away by intervening local include. Tue Jan 30 15:41:10 1996 Fred Fish From Jon Reeves : * i386-stub.c (getpacket): Change fprintf stream from "gdb" to stderr. (mem_fault_routine): Fix misplaced volatile type qualifier in decl. Mon Jan 29 19:05:58 1996 Fred Fish * Makefile.in (diststuff): Make all-doc; diststuff target does not exist in doc/Makefile.in. Mon Jan 29 18:44:57 1996 Stan Shebs * config/m88k/xm-cxux.h (BP_HIT_COUNT): Remove, never used. Mon Jan 29 00:10:35 1996 Wilfried Moser (Alcatel) * ch-valprint.c (calculate_array_length): New function to determine the length of an array type. (chill_val_print (case TYPE_CODE_ARRAY)): If the length of an array type is zero, call calculate_array_length. * gdbtypes.c (get_discrete_bounds (case TYPE_CODE_ENUM)): The values may not be sorted. Scan all entries and set the real lower and upper bound. Sun Jan 28 15:50:42 1996 Fred Fish * config/xm-linux.h: Move include of solib.h and #define of SVR4_SHARED_LIBS from here ... * config/nm-linux.h: ...to here. Sat Jan 27 10:34:05 1996 Fred Fish * configure.in (AC_CHECK_HEADERS): Check for sys/procfs.h. Also check for gregset_t and fpregset_t types. * configure: Regenerate. * core-regset.c (sys/procfs.h): Only include if HAVE_SYS_PROCFS_H is defined. (fetch_core_registers): Turn into stub unless both HAVE_GREGSET_T and HAVE_FPREGSET_T are defined. These changes allow systems like linux that are migrating to /proc support to use a single configuration for both new and old versions. * config/i386/linux.mt: Note that this is now for both a.out and ELF systems. * config/i386/linux.mh (NATDEPFILES): Add solib.o, core-regset.o, i386v4-nat.o * config/i386/tm-linux.h (tm-sysv4.h): Include. * config/i386/xm-linux.h (solib.h): Include (SVR4_SHARED_LIBS): Define. * i386v4-nat.c: Only compile if HAVE_SYS_PROCFS_H is defined. (supply_gregset, fill_gregset): Compile if HAVE_GREGSET_T defined. (supply_fpregset, fill_fpregset): Compile if HAVE_FPREGSET_T defined. Fri Jan 26 13:48:14 1996 Stan Shebs * config/sparc/xm-sparc.h (NEW_SUN_CORE): Remove, never used. * config/i386/xm-sun386.h: Ditto. * config/m68k/xm-sun2.h, config/m68k/xm-sun3.h: Ditto. Thu Jan 25 16:05:53 1996 Tom Tromey * Makefile.in (INSTALLED_LIBS, CLIBS): Include @LIBS@. Thu Jan 25 09:22:15 1996 Steve Chamberlain From Greg McGary : * dcache.c (dcache_peek, dcache_poke): Advance addr for multi-byte I/O. Thu Jan 25 13:08:51 1996 Doug Evans (dje@cygnus.com) * infrun.c (normal_stop): Fix test for shared library event. Thu Jan 25 03:26:38 1996 Doug Evans * configure.in (sparc64-*-*): Add default host configuration. start-sanitize-gdbtk (sparc64-*-solaris2* host): Link statically if GCC used. end-sanitize-gdbtk (sparc64-*-solaris2*): Add target configuration. * configure: Regenerated. * sparc/sp64sol2.mt: New file. Wed Jan 24 22:31:37 1996 Doug Evans * Makefile.in (RUNTEST): srcdir renamed to rootsrc. Wed Jan 24 15:42:24 1996 Tom Tromey * Makefile.in (lint): Close backquotes. start-sanitize-gdbtk Wed Jan 24 15:28:41 1996 Tom Tromey * gdbtk.tcl, gdbtk.c: Updated copyrights. * configure.in: Look for -ldl or -ldld when using Tcl 7.5 or greater. * configure: Rebuilt. end-sanitize-gdbtk Wed Jan 24 13:19:10 1996 Fred Fish * NEWS: Make note of new record and replay feature for remote debug sessions. * serial.c (gdbcmd.h): Include. (serial_logfile, serial_logfp, serial_reading, serial_writing): Define here, for remote debug session logging. (serial_log_command, serial_logchar, serial_write, serial_readchar): New functions for remote debug session logging. (serial_open): Open remote debug session log file when needed. (serial_close): Close remote debug session log file when needed. (_initialize_serial): Add set/show commands for name of remote debug session log file. * serial.h (serial_readchar): Declare (SERIAL_READCHAR): Call serial_readchar(). (SERIAL_WRITE): Call serial_write(). (serial_close): Declare as extern. (serial_logfile, serial_logfp): Declare. * top.c (execute_command): Declare serial_logfp. Log user command in remote debug session log if log file is open. * remote-array.c (array_wait): #ifdef out echo to gdb_stdout. (array_read_inferior_memory): Rewrite to fix memory overwrite bug. * remote-array.c (SREC_SIZE): Remove, duplicates define in monitor.h. * remote-array.c (hexchars, hex2mem): Remove, unused. * gdbserver/low-linux.c (store_inferior_registers): Remove unnecessary extern declaration of registers[]. * gdbserver/Makefile.in (all): Add gdbreplay. * gdbserver/gdbreplay.c: New file. * gdbserver/README: Give example of recording a remote debug session with gdb and then replaying it with gdbreplay. Tue Jan 23 18:02:35 1996 Per Bothner * stabsread.c (rs6000_builtin_type): Make bool type unsigned. (read_one_struct_field): Support boolean bitfields. * c-valprint.c (c_val_print): Print booleans properly. Tue Jan 23 18:54:09 1996 Stan Shebs * remote-vxsparc.c (vx_convert_to_virtual, vx_convert_from_virtual): Remove, never used. * config/sparc/vxsparc.mt (TDEPFILES): Add remote-vxsparc.o. Tue Jan 23 14:36:05 1996 Per Bothner * ch-exp.c (parse_tuple): Error if invalid mode. * value.h (COERCE_ARRAY): Don't coerce enums. (COERCE_ENUM): Don't COERCE_REF. (COERCE_NUMBER): New macro (same as COERCE_ARRAY then COERCE_ENUM). * valops.c (value_assign): Only do COERCE_ARRAY if internalvar (let value_cast handle it otherwise); do *not* COERCE_ENUM either way. * valarith.c: Use COERCE_NUMBER instead od COEREC_ARRAY. Add COERCE_REF before COERCE_ENUM. * values.c (value_as_long): Simplify. * valops.c (value_array): Create internalvar if !c_style_arrays. * language.c (lang_bool_type): Add Fortran support. * eval.c (OP_BOOL): Use LA_BOOL_TYPE. Tue Jan 23 13:08:26 1996 Jeffrey A Law (law@cygnus.com) * symfile.c (auto_solib_add): Renamed from auto_solib_add_at_startup. All references changed. * breakpoint.c (bpstat_what): Add shlib_event to the class types. Update state table. Reformat so that it's still readable. When we hit the shlib_event breakpoint, set the calss of shlib_event. (breakpoint_1): Add "shlib events" as a breakpoint type. Print the shlib_event breakpoint like other breakpoints. (create_solib_event_breakpoint): New function. (breakpoint_re_set_one): Handle solib_event breakpoints. * breakpoint.h (enum bytype): Add bp_shlib_event breakpoint type. (enum bpstat_what_main_action): Add BPSTAT_WHAT_CHECK_SHLIBS action. (create_solib_event_breakpoint): Declare. * infrun.c (wait_for_inferior): Handle CHECK_SHLIBS bpstat. (normal_stop): Inform the user when the inferior stoped due to a shared library event. (_initialize_infrun): Add new set/show variable "stop-on-solib-events" to control whether or not gdb continues the inferior or stops it when a shared library event occurs. * minsyms.c (lookup_minimal_symbol_solib_trampoline): New function. * somsolib.c (TODO list): Update. (som_solib_create_inferior_hook): Arrange for gdb to be notified when significant shared library events occur. * hppa-tdep.c (find_unwind_entry): No longer static. Tue Jan 23 09:00:48 1996 Doug Evans * printcmd.c (print_insn): Pass fprintf_unfiltered to INIT_DISASSEMBLE_INFO. start-sanitize-gdbtk * gdbtk.c (gdb_disassemble): Likewise. end-sanitize-gdbtk Mon Jan 22 16:59:40 1996 Stan Shebs * remote.c (remotebreak): New GDB variable. (remote_break): New global. (remote_interrupt): Send a break instead of ^C if remote_break. * NEWS: Describe the new variable. Mon Jan 22 16:24:11 1996 Doug Evans * sparc-tdep.c (_initialize_sparc_tdep): Always use print_insn_sparc. Fri Jan 19 07:19:38 1996 Fred Fish * hp300ux-nat.c (getpagesize): Remove unused function fetch_core_registers. (hp300ux_core_fns): Remove, is unused. (_initialize_core_hp300ux): Remove, is unused. (gdbcore.h): Remove #include, no longer needed. Fri Jan 19 00:59:53 1996 Jeffrey A Law (law@cygnus.com) * rs6000-nat.c (exec_one_dummy_insn): Rework to avoid ptrace bug in aix4.1.3 on the rs6000. Wed Jan 17 13:22:27 1996 Stan Shebs * remote-hms.c (hms_ops): Add value for to_thread_alive. * remote-nindy.c (nindy_ops): Ditto. * remote-udi.c (udi_ops): Ditto. Tue Jan 16 18:00:35 1996 James G. Smith * remote-mips.c (pmon_opn, pmon_wait, pmon_makeb64, pmon_zeroset, pmon_checkset, pmon_make_fastrec, pmon_check_ack, pmon_load_fast): New functions. Support for the PMON monitor world. (common_open): New function to merge support for different monitors. (mips_open): Use common_open(). (mips_send_command): New function. (mips_send_packet): Scan out-of-sequence packets. (mips_enter_debug, mips_exit_debug): New functions. (pmon_ops): New target definition structure. Tue Jan 16 11:22:58 1996 Stu Grossman (grossman@cygnus.com) * Makefile.in (CLIBS): Add LIBS to allow libraries to be specified on the make command line (via make LIBS=xxx). start-sanitize-gm * configure.in (enable-gm): magic.o -> gmagic.o. end-sanitize-gm start-sanitize-gdbtk Mon Jan 15 09:58:41 1996 Tom Tromey * gdbtk.tcl (create_expr_window): Many changes to update GUI. (add_expr): Changes from create_expr_window. (create_command_window): Set focus. (delete_expr): Rewrote. (expr_update_button): New proc. (add_expr): Put bindings on FocusIn, FocusOut. Don't allow .file_popup to be torn off. end-sanitize-gdbtk Fri Jan 12 21:41:58 1996 Jeffrey A Law (law@cygnus.com) * symtab.c (find_pc_symtab): Don't lose if OBJF_REORDERED is set but there are no psymtabs. Fri Jan 12 15:56:12 1996 Steve Chamberlain * dsrec.c (load_srec): Remove unused variable. * monitor.c (monitor_expect): Don't expect a ^C to echo. * serial.c (serial_open): Add parallel interface. * sh3-rom.c (parallel, parallel_in_use): New. (sh3_load): If parallel_in_use, download though the parallel port. (sh3_open): Open parallel port if specified. (sh3_close): New function. (_inititalize_sh3): Add sh3_close hook and documentation. * monitor.c (monitor_close): Export. * monitor.h (monitor_close): Add prototype. Fri Jan 12 13:11:42 1996 Stan Shebs From Wilfried Moser : * remote.c (remotetimeout): New GDB variable, use to set the remote timeout for reading. start-sanitize-gdbtk Fri Jan 12 09:36:17 1996 Tom Tromey * gdbtk.tcl (gdbtk_tcl_query): Swap Yes and No buttons. (update_listing): Use lassign. Use "see" to scroll. Don't need screen_top, screen_bot, screen_height. (update_assembly): Use "see" to scroll. (textscrollproc): Removed. (create_file_win): Don't use textscrollproc. (asmscrollproc): Removed. (create_asm_window): Don't use asmscrollproc. (create_asm_win): Ditto. (screen_height, screen_top, screen_bot): Removed. (run_editor): New proc. (build_framework): Use it. (create_file_win, create_source_window): Don't use textscrollproc. (create_breakpoints_window): Set -xscrollcommand on canvas. (not_implemented_yet): Default button is 0. (delete_char): Don't use tk_textBackspace. (create_command_window): Allow Tk bindings to fire after deleting character. (create_command_window): Make Delete delete left, not right. end-sanitize-gdbtk Fri Jan 12 07:14:27 1996 Fred Fish * lynx-nat.c, irix4-nat.c, sparc-nat.c: Include gdbcore.h to get "struct core_fns" defined. * Makefile.in (lynx-nat.o, irix4-nat.o, sparc-nat.o): Are dependent upon gdbcore_h. Thu Jan 11 23:13:24 1996 Per Bothner * symfile.c (decrement_reading_symtab): New function. * symfile.c, symtab.h (currently_reading_symtab): New variable. * symfile.c (psymtab_to_symtab): Adjust currently_reading_symtab. * gdbtypes.c (check_typedef): Don't call lookup_symbol if currently_reading_symtab (since that could infinitely recurse). Thu Jan 11 17:21:25 1996 Per Bothner * stabsread.c (read_struct_type): Trivial simplification. * stabsread.c (define-symbol): Use invisible references for TYPE_CODE_SET and TYPE_CODE_BITSTRING too. * valops.c (call_function_by_hand): Likewise. * eval.c (evaluate_subexp_standard): When known, use the formal parameter type as the expected type when evaluating arg expressions. * ch-lang.c (evaluate_subexp_chill): Likewise (for MULTI_SUBSCRIPT). start-sanitize-gdbtk Thu Jan 11 10:08:14 1996 Tom Tromey * main.c (main): Disable window interface if --help or --version specified. * gdbtk.tcl (FSBox): Don't use tk_listboxSingleSelect. Changes in sync with expect: * configure.in (ENABLE_GDBTK): Use CY_AC_PATH_TCL and CY_AC_PATH_TK. * aclocal.m4: Replaced with version from expect. * configure: Regenerated. end-sanitize-gdbtk Wed Jan 10 16:08:49 1996 Brendan Kehoe * configure.in, configure: Recognize rs6000-*-aix4*. * config/powerpc/xm-aix.h: Reduce to include "xm-aix4.h". * config/rs6000/aix4.mh (XM_FILE): Point to xm-aix4.h. * config/rs6000/xm-aix4.h: New file. * config/xm-aix4.h: New file. Wed Jan 10 11:25:37 1996 Fred Fish From Wilfried Moser : * gdbserver/low-linux.c: New file. * remote.c (remote_read_bytes): Fix aborts on larger packets. * config/i386/linux.mh (GDBSERVER_DEPFILES, GDBSERVER_LIBS): Define. * stabsread.c (define_symbol): If register value is too large, tell what it is and what max is. start-sanitize-gdbtk Wed Jan 10 09:07:22 1996 Tom Tromey * gdbtk.tcl (gdbtk_tcl_fputs, gdbtk_tcl_fputs_error, gdbtk_tcl_flush): Use "see", not "yview". (gdbtk_tcl_query): Use questhead bitmap. various: Always wrap condition of 'if' in {...}. (add_breakpoint_frame): Set -value on radiobuttons. (lassign): New proc. (add_breakpoint_frame): Use lassign, not series of assignments. (decr): Made faster. (interactive_cmd): Use "see", not "yview". (not_implemented_yet): Use warning bitmap. (update_expr): Don't allow $expr to be evalled by Tcl. (create_expr_window): Don't use "focus". (delete_char, delete_line): Define globally. (delete_line, delete_char, create_command_window, update_autocmd, build_framework, create_asm_win, create_file_win): Use "see", not "yview". (create_copyright_window, center_window, bind_widget_after_class): New procs. (FSBox,create_command_window, create_autocmd_window): Binding changes for Tk4. (textscrollproc): Define globally. (build_framework): tk_menuBar no longer needed. Keys Prior, Next, Home, End, Up, and Down are all defined by Tk. (apply_filespec): Use error bitmap in dialog. (files_command): Don't use tk_listboxSingleSelect. (files_command): Don't use "uniq" to remove duplicates from a list. (update_assembly): Use lassign. (create_asm_win): Removed redundant bindings. (listing_window_button_1, file_popup_menu): Use tk_popup. (ButtonRelease-1 binding): Just remove tag from window; rest handled by Tk. * gdbtk.c (gdbtk_query): Use Tcl_Merge to provide quoting. (call_wrapper): Use Tcl_Eval, not Tcl_VarEval. (gdbtk_call_command): Ditto. end-sanitize-gdbtk Tue Jan 9 09:33:53 1996 Jeffrey A Law (law@cygnus.com) * hpread.c (hpread_build_psymtabs): Finish Jan 4th enum namespace -> enum_namespace change. Tue Jan 9 04:44:47 1996 Wilfried Moser (Alcatel) * ch-exp.c (parse_primval): In case ARRAY, add missing FORWARD_TOKEN (). Mon Jan 8 13:29:34 1996 Stan Shebs * remote-mips.c (mips_receive_header): Recognize \012 instead of \n, but write \n when program sends a \012. * ser-mac.c (mac_input_buffer): Increase size of buffer. Mon Jan 8 12:00:40 1996 Jeffrey A Law (law@cygnus.com) * infptrace.c (initialize_infptrace): Move function out of #ifdef conditional; put code within the function inside an #ifdef conditional. * buildsym.c (end_symtab): Remove sort_pending and sort_linevec arguments. Sorting is now dependent on OBJF_REORDERED. All callers/references changed. * dbxread.c (read_ofile_symtab): Correctly determine value for last_source_start_addr for reordered executables. (process_one_symbol): Handle N_FUN with no name as an end of function marker. * partial-stab.h (case N_FN, N_TEXT): Don't assume CUR_SYMBOL_VALUE is the high text address for a psymtab. (case N_SO): Likewise. (case N_FUN): Handle N_FUN with no name as an end of function marker. * minsyms.c (lookup_minimal_symbol_by_pc): Examine all symbols at the same address rather than a random subset of them. * coffread.c (coff_symfile_init): Set OBJF_REORDERED. * elfread.c (elf_symfile_init): Similarly. * somread.c (som_symfile_init): Similarly. * xcoffread.c (xcoff_symfile_init): Similarly. Fri Jan 5 17:46:01 1996 Stu Grossman (grossman@cygnus.com) * stack.c (print_stack_frame print_frame_info) symmisc.c (dump_symtab): Change RETURN_MASK_ERROR to RETURN_MASK_ALL so that catch_errors doesn't get blindsided by QUIT and lose the cleanup chain. This fixes a problem where ^C while in a user-defined command sometimes leaves instream NULL and causes a segfault in command_loop. Fri Jan 5 13:59:16 1996 Brendan Kehoe * configure.in, configure: Add `-ldl -lw' for Solaris linking. Fri Jan 5 12:02:00 1996 Steve Chamberlain * config/sh/sh.mt, config/powerpc/*.mt, config/pa/hppapro.mt, config/m68k/monitor.mt, config/h8500/h8500.mt, config/h8300/h8300.mt: srec.o renamed to dsrec.o. Thu Jan 4 16:04:54 1996 Stu Grossman (grossman@cygnus.com) * breakpoint.c (remove_breakpoint): Change error to warning so that hardware watchpoint removal problems won't leave breakpoint traps in the target. start-sanitize-gdbtk * configure configure.in: Make --enable-gdbtk be the default. end-sanitize-gdbtk * remote-e7000.c (e7000_insert_breakpoint, e7000_remove_breakpoint): Use e7000 based breakpoints, not memory breakpoints. * (e7000_wait): Adjust PC back by two when we see a breakpoint to compensate for e7000 maladjustment. * sparcl-tdep.c (sparclite_check_watch_resources): Fix logic bug which prevented hardware watchpoints from working. Thu Jan 4 10:44:17 1996 Fred Fish * infptrace.c (udot_info): New function. (PT_*): Define each individually if that one is not defined. * rs6000-nat.c (kernel_u_size): New function Include for "struct user" * alpha-nat.c (kernel_u_size): New function. Include for "struct user" * sparc-nat.c (kernel_u_size): New function. Include for "struct user" * i386b-nat.c (kernel_u_size): New function. * i386v-nat.c (kernel_u_size): New function. * config/i386/nm-fbsd.h (KERNEL_U_SIZE): Define. (kernel_u_size): Declare. * config/i386/nm-linux.h (KERNEL_U_SIZE): Define. (kernel_u_size): Declare. * config/sparc/nm-sun4os4.h (KERNEL_U_SIZE): Define. (kernel_u_size): Declare. * config/alpha/nm-osf2.h (KERNEL_U_SIZE): Define. (kernel_u_size): Declare. * config/rs6000/nm-rs6000.h (KERNEL_U_SIZE): Define. (kernel_u_size): Declare. Thu Jan 4 11:00:01 1996 steve chamberlain * mdebugread.c (mylookup_symbol): enum namespace becomes enum_namespace type. * symfile.c (add_psymbol_to_list) (add_psymbol_addr_to_list): Ditto. * symtab.c (lookup_partial_symbol): Ditto. (lookup_symbol): Ditto. (lookup_block_symbol): Ditto. * win32-nat.c (handle_load_dll): Use incoming dll base. (child_wait): Catch DLL load errors. (create_child_inferior): Translated between paths correctly. Wed Jan 3 23:13:53 1996 Fred Fish * i386v4-nat.c (supply_gregset, fill_gregset): Subtract NUM_FREGS from NUM_REGS to get number of general registers that we care about. * config/i386/tm-i386.h (REGISTER_BYTES): Define in terms of number of general regs and number of floating point regs. Wed Jan 3 19:49:54 1996 steve chamberlain * config/i386/tm-win32.h (IN_SOLIB_CALL_TRAMPOLINE): New. (SKIP_TRAMPOLINE_CODE): New. * config/i386/xm-win32.h (CANT_FORK): Deleted. (SLASH*) Changed to use unix style slash. * symtab.h (namespace enum): becomes typedef to avoid namespace collision in C++. * infcmd.c (path_command): Use empty string if PATH name not set. * i386-tdep.c (skip_trampoline_code): New function. * srec.c: Renamed dsrec.c to avoid filename collision. * Makefile.in: Cope with renaming. Wed Jan 3 13:09:04 1996 Fred Fish * symmisc.c (print_objfile_statistics): Print memory use statistics for objfile psymbol, symbol, and type obstacks. Tue Jan 2 13:41:14 1996 Stan Shebs * config/mips/nm-irix5.h: Restore. (TARGET_HAS_HARDWARE_WATCHPOINTS, etc): Define as for Irix 4; from Lee Iverson . * config/mips/irix5.mh (NAT_FILE): Use nm-irix5.h. * config/mips/irix[345].mh (MUNCH_DEFINE): Remove. For older changes see ChangeLog-95 Local Variables: mode: indented-text left-margin: 8 fill-column: 74 version-control: never End: