2017-06-13 Andreas Arnez * dwarf2loc.c (read_pieced_value): Respect the piece offset, as given by DW_OP_bit_piece. (write_pieced_value): Likewise. 2017-06-13 Andreas Arnez * dwarf2loc.c (read_pieced_value): Move the buffer allocation and some other preparations to the places where sufficient information is available. (write_pieced_value): Likewise. 2017-06-13 Andreas Arnez * dwarf2loc.c (bits_to_bytes): New function. (read_pieced_value): Fix offset calculations for register pieces on big-endian targets. (write_pieced_value): Likewise. 2017-06-13 Andreas Arnez * dwarf2loc.c (read_pieced_value): Remove buffer_size variable. (write_pieced_value): Likewise. 2017-06-13 Andreas Arnez * dwarf2loc.c (write_pieced_value): When writing to a bit-field, transfer the source value's least significant bits, instead of its lowest-addressed ones. Rename type_len to max_offset. (read_pieced_value): Mirror above changes to write_pieced_value as applicable. 2017-06-13 Andreas Arnez * dwarf2loc.c (write_pieced_value): In DWARF_VALUE_MEMORY, truncate full bytes from dest_offset_bits before using it as an offset into the buffer. 2017-06-13 Andreas Arnez * dwarf2loc.c (write_pieced_value): Include transfer size in byte-wise check. 2017-06-13 Andreas Arnez * dwarf2loc.c (write_pieced_value): Fix copy/paste error in the calculation of this_size. 2017-06-13 Andreas Arnez * dwarf2loc.c (read_pieced_value): Respect parent value's offset when targeting a bit-field. (write_pieced_value): Likewise. 2017-06-13 Andreas Arnez * dwarf2loc.c (struct piece_closure) : Remove field. (allocate_piece_closure): Drop addr_size parameter. (dwarf2_evaluate_loc_desc_full): Adjust call to allocate_piece_closure. 2017-06-13 Andreas Arnez PR gdb/21226 * dwarf2loc.c (read_pieced_value): Anchor stack value pieces at the LSB end, independent of endianness. 2017-06-13 Andreas Arnez * dwarf2loc.c (write_pieced_value): Fix order of calculations for size capping. 2017-06-13 Yao Qi * mips-linux-nat.c: Move include features/mips*-linux.c to mips-linux-tdep.c. (_initialize_mips_linux_nat): Move initialize_tdesc_mips* calls to mips-linux-tdep.c. * mips-linux-tdep.c: Include features/mips*-linux.c (_initialize_mips_linux_tdep): Call initialize_tdesc_mips* functions. * mips-linux-tdep.h (tdesc_mips_linux): Declare. (tdesc_mips_dsp_linux, tdesc_mips64_linux): Declare. (tdesc_mips64_dsp_linux): Declare. 2017-06-12 Tom Tromey * valprint.h (val_print_type_code_int): Remove. * valprint.c (generic_val_print_int): Always call val_print_scalar_formatted. (val_print_type_code_int): Remove. * printcmd.c (print_scalar_formatted): Handle options->format==0. * f-valprint.c (f_val_print): Use val_print_scalar_formatted. * c-valprint.c (c_val_print_int): Use val_print_scalar_formatted. * ada-valprint.c (ada_val_print_num): Use val_print_scalar_formatted. 2017-06-12 Tom Tromey * printcmd.c (print_scalar_formatted): Unify the two switches. Don't convert scalars to LONGEST. 2017-06-12 Tom Tromey PR exp/16225: * valprint.h (print_decimal_chars): Update. * valprint.c (maybe_negate_by_bytes): New function. (print_decimal_chars): Add "is_signed" argument. * printcmd.c (print_scalar_formatted): Update. 2017-06-12 Tom Tromey PR exp/16225: * valprint.h (print_binary_chars, print_hex_chars): Update. * valprint.c (val_print_type_code_int): Update. (print_binary_chars): Add "zero_pad" argument. (emit_octal_digit): New function. (print_octal_chars): Don't zero-pad. (print_decimal_chars): Likewise. (print_hex_chars): Add "zero_pad" argument. * sh64-tdep.c (sh64_do_fp_register): Update. * regcache.c (regcache::dump): Update. * printcmd.c (print_scalar_formatted): Update. * infcmd.c (default_print_one_register_info): Update. 2017-06-12 Pedro Alves Alan Hayward * mips-tdep.c (MAX_MIPS_ABI_REGSIZE): New. (mips_eabi_push_dummy_call): Rename local 'regsize' to 'abi_regsize'. Rename local array 'valbuf' to 'ref_valbuf', and use MAX_MIPS_ABI_REGSIZE instead of MAX_REGISTER_SIZE to size it. Assert that abi_regsize bytes fit in 'ref_valbuf'. 2017-06-12 Pedro Alves * dwarf2read.c (mapped_symtab::data): Now a vector of symtab_index_entry instead of vector of std::unique_ptr. All users adjusted to check whether an element's name is NULL instead of checking whether the element itself is NULL. (find_slot): Change return type. Adjust. (hash_expand, , add_index_entry, uniquify_cu_indices) (write_hash_table): Adjust. 2017-06-12 Pedro Alves * dwarf2read.c (recursively_count_psymbols): New function. (write_psymtabs_to_index): Call it to compute number of psyms and pass estimate size of psyms_seen to unordered_set's ctor. 2017-06-12 Pedro Alves * dwarf2read.c (write_hash_table): Check if key already exists before emplacing. 2017-06-12 Pedro Alves * dwarf2read.c (data_buf::append_space): Rename to... (data_buf::grow): ... this, and make private. Adjust all callers. (data_buf::append_uint): New method. (add_address_entry, write_one_signatured_type) (write_psymtabs_to_index): Use it. 2017-06-12 Pedro Alves * dwarf2read.c (file_write(FILE *, const void *, size_t)): Delete. (file_write (FILE *, const std::vector&)): Delete. (data_buf::file_write): Call ::fwrite directly. 2017-06-12 Pedro Alves * dwarf2read.c (uniquify_cu_indices): Use std::unique and std::vector::erase. 2017-06-12 Jan Kratochvil Code cleanup: C++ify .gdb_index producer. * dwarf2read.c: Include and . (MAYBE_SWAP) [WORDS_BIGENDIAN]: Cast to offset_type. (struct strtab_entry, hash_strtab_entry, eq_strtab_entry) (create_strtab, add_string): Remove. (file_write, data_buf): New. (struct symtab_index_entry): Use std::vector for cu_indices. (struct mapped_symtab): Use std::vector for data. (hash_symtab_entry, eq_symtab_entry, delete_symtab_entry) (create_symbol_hash_table, create_mapped_symtab, cleanup_mapped_symtab): Remove. (find_slot): Change return type. Update it to the new data structures. (hash_expand, add_index_entry): Update it to the new data structures. (offset_type_compare): Remove. (uniquify_cu_indices): Update it to the new data structures. (c_str_view, c_str_view_hasher, vector_hasher): New. (add_indices_to_cpool): Remove. (write_hash_table): Update it to the new data structures. (struct psymtab_cu_index_map, hash_psymtab_cu_index) (eq_psymtab_cu_index): Remove. (psym_index_map): New typedef. (struct addrmap_index_data): Change addr_obstack pointer to data_buf reference and std::unordered_map for cu_index_htab. (add_address_entry, add_address_entry_worker, write_address_map) (write_psymbols): Update it to the new data structures. (write_obstack): Remove. (struct signatured_type_index_data): Change types_list to a data_buf reference and psyms_seen to a std::unordered_set reference. (write_one_signatured_type, recursively_write_psymbols) (write_psymtabs_to_index): Update it to the new data structures. 2017-06-11 Simon Marchi * NEWS (Changes since GDB 8.0): Announce {set,show} debug separate-debug-file commands. * symfile.h (separate_debug_file_debug): New global. * symfile.c (separate_debug_file_debug): New global. (separate_debug_file_exists, find_separate_debug_file): Add debug output. (_initialize_symfile): Add "set debug separate-debug-file" command. * build-id.c (build_id_to_debug_bfd, find_separate_debug_file_by_buildid): Add debug output. 2017-06-10 Simon Marchi * gdbarch.sh (displaced_step_free_closure): Remove. * gdbarch.h, gdbarch.c: Re-generate. * aarch64-linux-tdep.c (aarch64_linux_init_abi): Don't set displaced_step_free_closure. * amd64-linux-tdep.c (amd64_linux_init_abi_common): Likewise. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * i386-linux-tdep.c (i386_linux_init_abi): Likewise. * rs6000-aix-tdep.c (rs6000_aix_init_osabi): Likewise. * rs6000-tdep.c (rs6000_gdbarch_init): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * arch-utils.h (simple_displaced_step_free_closure): Remove. * arch-utils.c (simple_displaced_step_free_closure): Remove. * infrun.c (displaced_step_clear): Call xfree instead of gdbarch_displaced_step_free_closure. 2017-06-08 Sergio Durigan Junior * common/common-utils.c (stringify_argv): Check for "arg[0] != NULL". 2017-06-08 Alan Hayward * mn10300-tdep.c (MN10300_MAX_REGISTER_SIZE): Add. (mn10300_extract_return_value): Use MN10300_MAX_REGISTER_SIZE. (mn10300_push_dummy_call): Likewise. 2017-06-08 Alan Hayward * mi/mi-main.c (register_changed_p): Use value_contents_eq. 2017-06-08 Alan Hayward * mi/mi-main.c (register_changed_p): Use cooked_read_value. 2017-06-07 Sergio Durigan Junior * NEWS (Changes since GDB 8.0): Announce that GDBserver is now able to start inferiors using a shell. (New remote packets): Announce new packet "QStartupWithShell". * remote.c: Add PACKET_QStartupWithShell. (extended_remote_create_inferior): Handle new PACKET_QStartupWithShell. (remote_protocol_features) : New entry for PACKET_QStartupWithShell. (_initialize_remote): Call "add_packet_config_cmd" for QStartupShell. 2017-06-07 Sergio Durigan Junior Pedro Alves * Makefile.in (HFILES_NO_SRCDIR): Add "common/common-inferior.h" and "nat/fork-inferior.h". * common/common-inferior.h: New file, with contents from "gdb/inferior.h". * commom/common-utils.c: Include "common-utils.h". (stringify_argv): New function. * common/common-utils.h (stringify_argv): New prototype. * configure.nat: Add "fork-inferior.o" as a dependency for "*linux*", "fbsd*" and "nbsd*" hosts. * corefile.c (get_exec_file): Update comment. * darwin-nat.c (darwin_ptrace_him): Call "gdb_startup_inferior" instead of "startup_inferior". (darwin_create_inferior): Call "add_thread_silent" after "fork_inferior". * fork-child.c: Cleanup unnecessary includes. (SHELL_FILE): Move to "common/common-fork-child.c". (environ): Likewise. (exec_wrapper): Initialize. (get_exec_wrapper): New function. (breakup_args): Move to "common/common-fork-child.c"; rename to "breakup_args_for_exec". (escape_bang_in_quoted_argument): Move to "common/common-fork-child.c". (saved_ui): New variable. (prefork_hook): New function. (postfork_hook): Likewise. (postfork_child_hook): Likewise. (gdb_startup_inferior): Likewise. (fork_inferior): Move to "common/common-fork-child.c". Update function to support gdbserver. (startup_inferior): Likewise. * gdbcore.h (get_exec_file): Remove declaration. * gnu-nat.c (gnu_create_inferior): Call "gdb_startup_inferior" instead of "startup_inferior". Call "add_thread_silent" after "fork_inferior". * inf-ptrace.c: Include "nat/fork-inferior.h" and "utils.h". (inf_ptrace_create_inferior): Call "gdb_startup_inferior" instead of "startup_inferior". Call "add_thread_silent" after "fork_inferior". * inferior.h: Include "common-inferior.h". (trace_start_error): Move to "common/common-utils.h". (trace_start_error_with_name): Likewise. (fork_inferior): Move prototype to "nat/fork-inferior.h". (startup_inferior): Likewise. (gdb_startup_inferior): New prototype. * nat/fork-inferior.c: New file, with contents from "fork-child.c". * nat/fork-inferior.h: New file. * procfs.c (procfs_init_inferior): Call "gdb_startup_inferior" instead of "startup_inferior". Call "add_thread_silent" after "fork_inferior". * target.h (target_terminal_init): Move prototype to "target/target.h". (target_terminal_inferior): Likewise. (target_terminal_ours): Likewise. * target/target.h (target_terminal_init): New prototype, moved from "target.h". (target_terminal_inferior): Likewise. (target_terminal_ours): Likewise. * utils.c (gdb_flush_out_err): New function. 2017-06-07 Sergio Durigan Junior * Makefile.in (HFILES_NO_SRCDIR): Add "common/common-gdbthread.h". * common/common-gdbthread.h: New file, with parts from "gdb/gdbthread.h". * gdbthread.h: Include "common-gdbthread.h". (switch_to_thread): Moved to "common/common-gdbthread.h". 2017-06-07 Sergio Durigan Junior * Makefile.in (SFILES): Add "common/job-control.c". (HFILES_NO_SRCDIR): Add "common/job-control.h". (COMMON_OBS): Add "job-control.o". * common/job-control.c: New file, with contents from "gdb/inflow.c". * common/job-control.h: New file, with contents from "terminal.h". * fork-child.c: Include "job-control.h". * inflow.c: Include "job-control.h". (gdb_setpgid): Move to "common/common-inflow.c". (_initialize_inflow): Move setting of "job_control" to "handle_job_control". * terminal.h (job_control): Moved to "common/common-terminal.h". (gdb_setpgid): Likewise. * top.c: Include "job_control.h". * utils.c: Likewise. (job_control): Moved to "job-control.c". 2017-06-07 Pedro Alves * Makefile.in (SFILES): Add gdb_regex.c. (COMMON_OBS): Add gdb_regex.o. * ada-lang.c (ada_add_standard_exceptions) (ada_add_exceptions_from_frame, name_matches_regex) (ada_add_global_exceptions, ada_exceptions_list_1): Change regex parameter type to compiled_regex. Adjust. (ada_exceptions_list): Use compiled_regex. * break-catch-throw.c (exception_catchpoint::pattern): Now a std::unique_ptr. (exception_catchpoint::~exception_catchpoint): Remove regfree call. (check_status_exception_catchpoint): Adjust to use compiled_regex. (handle_gnu_v3_exceptions): Adjust to use compiled_regex. * breakpoint.c (solib_catchpoint::compiled): Now a std::unique_ptr. (solib_catchpoint::~solib_catchpoint): Remove regfree call. (check_status_catch_solib): Adjust to use compiled_regex. (add_solib_catchpoint): Adjust to use compiled_regex. * cli/cli-cmds.c (apropos_command): Use compiled_regex. * cli/cli-decode.c (apropos_cmd): Change regex parameter to compiled_regex reference. Adjust to use it. * cli/cli-decode.h: Remove struct re_pattern_buffer forward declaration. Include "gdb_regex.h". (apropos_cmd): Change regex parameter to compiled_regex reference. * gdb_regex.c: New file. * gdb_regex.h (make_regfree_cleanup, get_regcomp_error): Delete declarations. (class compiled_regex): New. * linux-tdep.c: Include "common/gdb_optional.h". (struct mapping_regexes): New, factored out from mapping_is_anonymous_p, and adjusted to use compiled_regex. (mapping_is_anonymous_p): Use mapping_regexes wrapped in a gdb::optional and remove cleanups. Adjust to compiled_regex. * probe.c: Include "common/gdb_optional.h". (collect_probes): Use compiled_regex and gdb::optional and remove cleanups. * skip.c: Include "common/gdb_optional.h". (skiplist_entry::compiled_function_regexp): Now a gdb::optional. (skiplist_entry::compiled_function_regexp_is_valid): Delete field. (free_skiplist_entry): Remove regfree call. (compile_skip_regexp, skip_rfunction_p): Adjust to use compiled_regex and gdb::optional. * symtab.c: Include "common/gdb_optional.h". (search_symbols): Use compiled_regex and gdb::optional. * utils.c (do_regfree_cleanup, make_regfree_cleanup) (get_regcomp_error, compile_rx_or_error): Delete. Some bits moved to gdb_regex.c. 2017-06-07 Alan Hayward * regcache.c (regcache::save): Avoid buffer use. (regcache::dump): Likewise. 2017-06-07 Alan Hayward * sh-tdep.c (sh_pseudo_register_read): Remove MAX_REGISTER_SIZE. (sh_pseudo_register_write): Likewise. * sh64-tdep.c (sh64_pseudo_register_read): Likewise. (sh64_pseudo_register_write): Likewise 2017-06-07 Alan Hayward * aarch64-tdep.c (aarch64_store_return_value): Use V_REGISTER_SIZE. (aarch64_pseudo_read_value): Likewise. (aarch64_pseudo_write): Likewise. 2017-06-06 Yao Qi * regformats/regdef.h (set_register_cache): Remove the declaration. 2017-06-06 Alan Hayward * frame.c (frame_unwind_register_signed): Use frame_unwind_register_value. 2017-06-06 Pedro Alves PR breakpoints/21553 * breakpoint.c (create_breakpoints_sal_default) (init_breakpoint_sal, create_breakpoint_sal): Use gdb::unique_xmalloc_ptr for string parameters. (create_breakpoint): Constify 'extra_string' and 'cond_string' parameters. Replace cleanups with gdb::unique_xmalloc_ptr. (base_breakpoint_create_breakpoints_sal) (bkpt_create_breakpoints_sal, tracepoint_create_breakpoints_sal) (strace_marker_create_breakpoints_sal) (create_breakpoints_sal_default): Use gdb::unique_xmalloc_ptr for string parameters. * breakpoint.h (breakpoint_ops::create_breakpoints_sal): Use gdb::unique_xmalloc_ptr for string parameters. (create_breakpoint): Constify 'extra_string' and 'cond_string' parameters. 2017-06-06 Alan Hayward * alpha-tdep.c (alpha_register_to_value): Use get_frame_register_value. (alpha_value_to_register): Use ALPHA_REGISTER_SIZE. 2017-06-06 Alan Hayward * ia64-tdep.c (IA64_MAX_FP_REGISTER_SIZE) Add. (ia64_register_to_value): Use IA64_MAX_FP_REGISTER_SIZE. (ia64_value_to_register): Likewise. (ia64_extract_return_value): Likewise. (ia64_store_return_value): Likewise. (ia64_push_dummy_call): Likewise. 2017-06-04 Joel Brobecker GDB 8.0 released. 2017-06-03 Simon Marchi * x86-linux-nat.c (struct arch_lwp_info): Remove. 2017-06-03 Simon Marchi * linux-nat.c (linux_nat_post_attach_wait): Remove FIRST parameter. (linux_nat_attach): Adjust call to linux_nat_post_attach_wait. 2017-06-02 Simon Marchi * event-loop.c (poll_timers): Unallocate timer using delete instead of xfree. 2017-06-02 Simon Marchi * breakpoint.h (struct breakpoint_ops) : Remove. (struct breakpoint) <~breakpoint>: New. (struct watchpoint): Inherit from breakpoint. <~watchpoint>: New. : Remove. (struct tracepoint): Inherit from breakpoint. : Remove. * breakpoint.c (longjmp_breakpoint_ops): Remove. (struct longjmp_breakpoint): Inherit from breakpoint. <~longjmp_breakpoint>: New. : Remove. (new_breakpoint_from_type): Remove casts. (watchpoint_in_thread_scope): Remove reference to base field. (watchpoint_del_at_next_stop): Likewise. (update_watchpoint): Likewise. (watchpoint_check): Likewise. (bpstat_check_watchpoint): Likewise. (set_longjmp_breakpoint): Likewise. (struct fork_catchpoint): Inherit from breakpoint. : Remove. (struct solib_catchpoint): Inherit from breakpoint. <~solib_catchpoint>: New. : Remove. (dtor_catch_solib): Change to ... (solib_catchpoint::~solib_catchpoint): ... this. (breakpoint_hit_catch_solib): Remove reference to base field. (add_solib_catchpoint): Likewise. (create_fork_vfork_event_catchpoint): Likewise. (struct exec_catchpoint): Inherit from breakpoint. <~exec_catchpoint>: New. : Remove. (dtor_catch_exec): Change to ... (exec_catchpoint::~exec_catchpoint): ... this. (dtor_watchpoint): Change to ... (watchpoint::~watchpoint): ... this. (watch_command_1): Remove reference to base field. (catch_exec_command_1): Likewise. (base_breakpoint_dtor): Change to ... (breakpoint::~breakpoint): ... this. (base_breakpoint_ops): Remove dtor field value. (longjmp_bkpt_dtor): Change to ... (longjmp_breakpoint::~longjmp_breakpoint): ... this. (strace_marker_create_breakpoints_sal): Remove reference to base field. (delete_breakpoint): Don't manually call breakpoint destructor. (create_tracepoint_from_upload): Remove reference to base field. (trace_pass_set_count): Likewise. (initialize_breakpoint_ops): Don't initialize momentary_breakpoint_ops, don't set dtors. * ada-lang.c (struct ada_catchpoint): Inherit from breakpoint. <~ada_catchpoint>: New. : Remove. (create_excep_cond_exprs): Remove reference to base field. (dtor_exception): Change to ... (ada_catchpoint::~ada_catchpoint): ... this. (dtor_catch_exception): Remove. (dtor_catch_exception_unhandled): Remove. (dtor_catch_assert): Remove. (create_ada_exception_catchpoint): Remove reference to base field. (initialize_ada_catchpoint_ops): Don't set dtors. * break-catch-sig.c (struct signal_catchpoint): Inherit from breakpoint. <~signal_catchpoint>: New. : Remove. (signal_catchpoint_dtor): Change to ... (signal_catchpoint::~signal_catchpoint): ... this. (create_signal_catchpoint): Remove reference to base field. (initialize_signal_catchpoint_ops): Don't set dtor. * break-catch-syscall.c (struct syscall_catchpoint): Inherit from breakpoint. <~syscall_catchpoint>: New. : Remove. (dtor_catch_syscall): Change to ... (syscall_catchpoint::~syscall_catchpoint): ... this. (create_syscall_event_catchpoint): Remove reference to base field. (initialize_syscall_catchpoint_ops): Don't set dtor. * break-catch-throw.c (struct exception_catchpoint): Inherit from breakpoint. <~exception_catchpoint>: New. : Remove. (dtor_exception_catchpoint): Change to ... (exception_catchpoint::~exception_catchpoint): ... this. (handle_gnu_v3_exceptions): Remove reference to base field. (initialize_throw_catchpoint_ops): Don't set dtor. * ctf.c (ctf_get_traceframe_address): Remove reference to base field. * remote.c (remote_get_tracepoint_status): Likewise. * tracefile-tfile.c (tfile_get_traceframe_address): Likewise. * tracefile.c (tracefile_fetch_registers): Likewise. * tracepoint.c (actions_command): Likewise. (validate_actionline): Likewise. (tfind_1): Likewise. (get_traceframe_location): Likewise. (find_matching_tracepoint_location): Likewise. (parse_tracepoint_status): Likewise. * mi/mi-cmd-break.c (mi_cmd_break_passcount): Likewise. 2017-06-02 Simon Marchi * breakpoint.c (struct longjmp_breakpoint): New struct. (is_tracepoint_type): Change return type to bool. (is_longjmp_type): New function. (new_breakpoint_from_type): Handle longjmp kinds of breakpoints. (set_raw_breakpoint_without_location): Use new_breakpoint_from_type. (set_raw_breakpoint): Likewise. 2017-06-02 Simon Marchi * breakpoint.c (new_breakpoint_from_type): New function. (create_breakpoint_sal): Use new_breakpoint_from_type and unique_ptr. (create_breakpoint): Likewise. 2017-05-31 Simon Marchi * memattr.c (mem_info_command): Rename to ... (info_mem_command): ... this. (mem_enable_command): Rename to ... (enable_mem_command): ... this. (mem_disable_command): Rename to ... (disable_mem_command): ... this. (mem_delete_command): Rename to ... (delete_mem_command): ... this. (_initialize_mem): Adjust function names. 2017-05-31 Markus Metzger * btrace.c (handle_pt_insn_events): New. (ftrace_add_pt): Call handle_pt_insn_events. Rename ERRCODE into STATUS. Split into this and ... (handle_pt_insn_event_flags): ... this. 2017-05-31 Markus Metzger * configure.ac: Check for pt_insn_event, struct pt_insn.enabled, and struct pt_insn.resynced. * configure: Regenerated. * config.in: Regenerated. 2017-05-30 Tim Wiederhake * btrace.c (ftrace_find_call_by_number): New function. (ftrace_new_function): Store objects, not pointers. (ftrace_find_call_by_number, ftrace_new_return, ftrace_new_switch, ftrace_new_gap, ftrace_update_function, ftrace_compute_global_level_offset, btrace_stich_bts, btrace_clear, btrace_insn_get, btrace_insn_get_error, btrace_insn_end, btrace_insn_next, btrace_insn_prev, ptrace_find_insn_by_number, btrace_ends_with_single_insn, btrace_call_get): Account for btrace_thread_info::functions now storing objects. * btrace.h (struct btrace_thread_info): Add constructor. (struct btrace_thread_info) : Make std::vector. (struct btrace_thread_info) * btrace.c: Remove typedef bfun_s. (ftrace_new_gap): Directly add gaps to the list of gaps. (btrace_bridge_gaps, btrace_compute_ftrace_bts, pt_btrace_insn_flags, ftrace_add_pt, btrace_compute_ftrace_pt, btrace_compute_ftrace_1, btrace_finalize_ftrace, btrace_compute_ftrace): Use std::vector instead of gdb VEC. 2017-05-30 Tim Wiederhake * btrace.c (ftrace_fixup_caller, ftrace_new_return, ftrace_connect_bfun, ftrace_bridge_gap): Replace references to btrace_thread_info::segment with btrace_thread_info::next_segment and btrace_thread_info::prev_segment. * btrace.h: Remove struct btrace_func_link. (struct btrace_function): Replace pair of function segment pointers with pair of indices. * python/py-record-btrace.c (btpy_call_prev_sibling, btpy_call_next_sibling): Replace references to btrace_thread_info::segment with btrace_thread_info::next_segment and btrace_thread_info::prev_segment. * record-btrace.c (record_btrace_frame_this_id): Use btrace_find_call_by_number. 2017-05-30 Tim Wiederhake * btrace.c (ftrace_new_function, ftrace_fixup_level, ftrace_connect_bfun, ftrace_bridge_gap, btrace_bridge_gaps, btrace_insn_next, btrace_insn_prev): Remove references to btrace_thread_info::flow. * btrace.h (struct btrace_function): Remove FLOW. 2017-05-30 Tim Wiederhake * btrace.c (ftrace_find_call_by_number): New function. (ftrace_update_caller, ftrace_new_call, ftrace_new_tailcall, ftrace_get_caller, ftrace_find_call, ftrace_new_return, ftrace_match_backtrace, ftrace_connect_bfun, ftrace_connect_backtrace, ftrace_bridge_gap, btrace_bridge_gaps): Use btrace_function::up as an index. * btrace.h (struct btrace_function): Turn UP into an index. * python/py-record-btrace.c (btpy_call_up): Use btrace_function::up as an index. * record-btrace.c (record_btrace_frame_unwind_stop_reason, record_btrace_frame_prev_register, record_btrace_frame_sniffer, record_btrace_tailcall_frame_sniffe): Use btrace_find_call_by_number. 2017-05-30 Tim Wiederhake * btrace.c (ftrace_new_function, ftrace_new_call, ftrace_new_tailcall, ftrace_new_return, ftrace_new_switch, ftrace_new_gap, ftrace_update_function, ftrace_compute_global_level_offset, btrace_compute_ftrace_bts, ftrace_add_pt, btrace_compute_ftrace_pt, btrace_stitch_bts, btrace_fetch, btrace_clear, btrace_insn_number, btrace_insn_end, btrace_is_empty): Remove references to btrace_thread_info::begin and btrace_thread_info::end. * btrace.h (struct btrace_thread_info): Remove BEGIN and END. (struct btrace_thread_info) : Adjust comment. * record-btrace.c (record_btrace_start_replaying): Remove reference to btrace_thread_info::begin. 2017-05-30 Tim Wiederhake * btrace.c (ftrace_new_function, ftrace_new_call, ftrace_new_tailcall, ftrace_new_return, ftrace_new_switch, ftrace_new_gap, ftrace_update_function): Remove arguments that implicitly were always BTINFO->END. (btrace_compute_ftrace_bts, ftrace_add_pt, btrace_compute_ftrace_pt): Don't pass BTINFO->END. 2017-05-30 Tim Wiederhake * btrace.c: (btrace_insn_get, btrace_insn_get_error, btrace_insn_number, btrace_insn_begin, btrace_insn_end, btrace_insn_next, btrace_insn_prev, btrace_find_insn_by_number): Replace function segment pointer with index. (btrace_insn_cmp): Simplify. * btrace.h: (struct btrace_insn_iterator) Rename index to insn_index. Replace function segment pointer with index into function segment vector. * record-btrace.c (record_btrace_call_history): Replace function segment pointer use with index. (record_btrace_frame_sniffer): Retrieve function call segment through vector. (record_btrace_set_replay): Remove defunc't safety check. 2017-05-30 Tim Wiederhake * btrace.c (btrace_ends_with_single_insn): New function. (btrace_call_get, btrace_call_number, btrace_call_begin, btrace_call_end, btrace_call_next, btrace_call_prev, btrace_find_call_by_number): Use index into call segment vector instead of pointer. (btrace_call_cmp): Simplify. * btrace.h (struct btrace_call_iterator): Replace function call segment pointer with index into vector. * record-btrace.c (record_btrace_call_history): Use index instead of pointer. 2017-05-30 Tim Wiederhake * btrace.c (btrace_insn_begin, btrace_insn_end, btrace_find_insn_by_number): Add btinfo to iterator. * btrace.h (struct btrace_insn_iterator): Add btinfo. 2017-05-30 Tim Wiederhake * btrace.c (ftrace_new_function): Add btrace_thread_info to arguments and save pointers directly. (ftrace_new_call, ftrace_new_tailcall, ftrace_new_return, ftrace_new_switch, ftrace_new_gap, ftrace_update_function, ftrace_add_pt): Add btrace_thread_info to arguments. Adjust for changed signature of functions. (btrace_compute_ftrace_pt): Adjust for changed signature of functions. (btrace_fetch): Remove code that adds btrace_function pointers to vector of btrace_functions. (btrace_clear): Simplify freeing vector of btrace_functions. 2017-05-30 Tim Wiederhake * btrace.c (btrace_fetch, btrace_clear, btrace_find_insn_by_number): Replace VEC_* with std::vector functions. * btrace.h: Add include: vector. Remove typedef for DEF_VEC_P. (struct btrace_thread_info): Change type to std::vector. 2017-05-30 Simon Marchi * NEWS (Changes in GDB 8.0): Remove extra empty line. Move "Removed targets and native configurations" up. Merge duplicate "New commands" sub-sections. Add "New options" sub-sections. 2017-05-26 Alan Hayward * defs.h (copy_integer_to_size): New declaration. * findvar.c (copy_integer_to_size): New function. (do_cint_test): New selftest function. (copy_integer_to_size_test): Likewise. (_initialize_findvar): Likewise. * mips-fbsd-tdep.c (mips_fbsd_supply_reg): Use raw_supply_integer. (mips_fbsd_collect_reg): Use raw_collect_integer. * mips-linux-tdep.c (supply_32bit_reg): Use raw_supply_integer. (mips64_fill_gregset): Use raw_collect_integer (mips64_fill_fpregset): Use raw_supply_integer. * regcache.c (regcache::raw_supply_integer): New function. (regcache::raw_collect_integer): Likewise. * regcache.h: (regcache::raw_supply_integer): New declaration. (regcache::raw_collect_integer): Likewise. 2017-05-24 Yao Qi * Makefile.in (SFILES): Add gdbarch-selftests.c. (COMMON_OBS): Add gdbarch-selftests.o. * frame.c [GDB_SELF_TESTS] (create_new_frame): New function. * frame.h [GDB_SELF_TESTS] (create_new_frame): Declare. * gdbarch-selftests.c: New file. * regcache.h (regcache) <~regcache>: Mark it virtual if GDB_SELF_TEST. : Likewise. 2017-05-24 Yao Qi * regcache.c (current_regcache): Change it to regcache::current_regcache. (regcache_observer_target_changed): Update. (regcache_thread_ptid_changed): Make it a regcache static method. (regcache_thread_ptid_changed): Update. (class regcache_access): New. (current_regcache_test): Update. (_initialize_regcache): Update. * regcache.h: Include forward_list. (regcache): Declare regcache_thread_ptid_changed and declare registers_changed_ptid as friend. 2017-05-24 Yao Qi * i387-tdep.c (i387_register_to_value): Use register_size instead of TYPE_LENGTH. * m68k-tdep.c (m68k_register_to_value): Likewise. 2017-05-24 Yao Qi * i387-tdep.c (i387_convert_register_p): Return false if type code isn't TYPE_CODE_FLT. 2017-05-24 Yao Qi * alpha-tdep.c (alpha_convert_register_p): Return true if type length is 4. (alpha_register_to_value): Remove type length check. (alpha_value_to_register): Likewise. 2017-05-24 Yao Qi * ia64-tdep.c (ia64_convert_register_p): Check type's code is TYPE_CODE_FLT. 2017-05-24 Yao Qi * m68k-tdep.c (m68k_convert_register_p): Check type's code is TYPE_CODE_FLT or not. 2017-05-24 Yao Qi * alpha-tdep.c (alpha_gdbarch_init): Use XCNEW instead of XNEW. * avr-tdep.c (avr_gdbarch_init): Likewise. * bfin-tdep.c (bfin_gdbarch_init): Likewise. * cris-tdep.c (cris_gdbarch_init): Likewise. * ft32-tdep.c (ft32_gdbarch_init): Likewise. * lm32-tdep.c (lm32_gdbarch_init): Likewise. * m32r-tdep.c (m32r_gdbarch_init): Likewise. * m68hc11-tdep.c (m68hc11_gdbarch_init): Likewise. * mep-tdep.c (mep_gdbarch_init): Likewise. * microblaze-tdep.c (microblaze_gdbarch_init): Likewise. * mips-tdep.c (mips_gdbarch_init): Likewise. * mn10300-tdep.c (mn10300_gdbarch_init): Likewise. * moxie-tdep.c (moxie_gdbarch_init): Likewise. * msp430-tdep.c (msp430_gdbarch_init): Likewise. * sh64-tdep.c (sh64_gdbarch_init): Likewise. * v850-tdep.c (v850_gdbarch_init): Likewise. 2017-05-24 Yao Qi * selftest-arch.c (tests_with_arch): Call registers_changed and reinit_frame_cache. * selftest.c (run_self_tests): Likewise. 2017-05-24 Yao Qi * rs6000-tdep.c (gdb_print_insn_powerpc): Remove. (rs6000_gdbarch_init): Don't call set_gdbarch_print_insn. 2017-05-24 Yao Qi * rl78-tdep.c (rl78_gdbarch_init): Don't call set_gdbarch_print_insn. 2017-05-24 Yao Qi * h8300-tdep.c (h8300_gdbarch_init): Don't call set_gdbarch_print_insn. 2017-05-24 Yao Qi * alpha-tdep.c (alpha_gdbarch_init): Don't call set_gdbarch_print_insn. * arc-tdep.c (arc_gdbarch_init): Likewise. * arch-utils.c: include dis-asm.h. (default_print_insn): New function. * arch-utils.h (default_print_insn): Declare. * avr-tdep.c (avr_gdbarch_init): Don't call set_gdbarch_print_insn. * bfin-tdep.c (bfin_gdbarch_init): Likewise. * cris-tdep.c (cris_delayed_get_disassembler): Remove. (cris_gdbarch_init): Don't call set_gdbarch_print_insn. * frv-tdep.c (frv_gdbarch_init): Likewise. * ft32-tdep.c (ft32_gdbarch_init): Likewise. * gdbarch.sh (print_insn): Use default_print_insn. * gdbarch.c: Regenerated. * hppa-tdep.c (hppa_gdbarch_init): Likewise. * iq2000-tdep.c (iq2000_gdbarch_init): Likewise. * lm32-tdep.c (lm32_gdbarch_init): Likewise. * m32c-tdep.c (m32c_gdbarch_init): Likewise. * m32r-tdep.c (m32r_gdbarch_init): Likewise. * m68hc11-tdep.c (gdb_print_insn_m68hc11): Remove. (m68hc11_gdbarch_init): Don't call set_gdbarch_print_insn. * m68k-tdep.c (m68k_gdbarch_init): Likewise. * m88k-tdep.c (m88k_gdbarch_init): Likewise. * microblaze-tdep.c (microblaze_gdbarch_init): Likewise. * mn10300-tdep.c (mn10300_gdbarch_init): Likewise. * moxie-tdep.c (moxie_gdbarch_init): Likewise. * msp430-tdep.c (msp430_gdbarch_init): Likewise. * mt-tdep.c (mt_gdbarch_init): Likewise. * nds32-tdep.c (nds32_gdbarch_init): Likewise. * nios2-tdep.c (nios2_print_insn): Remove. (nios2_gdbarch_init): Don't call set_gdbarch_print_insn. * rx-tdep.c (rx_gdbarch_init): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * score-tdep.c (score_print_insn): Remove. (score_gdbarch_init): Don't call set_gdbarch_print_insn. * sh-tdep.c (sh_gdbarch_init): Likewise. * sh64-tdep.c (sh64_gdbarch_init): Likewise. * sparc-tdep.c (sparc32_gdbarch_init): Likewise. * tic6x-tdep.c (tic6x_print_insn): Remove. (tic6x_gdbarch_init): Don't call set_gdbarch_print_insn. * tilegx-tdep.c (tilegx_gdbarch_init): Likewise. * v850-tdep.c (v850_gdbarch_init): Likewise. * vax-tdep.c (vax_gdbarch_init): Likewise. * xstormy16-tdep.c (xstormy16_gdbarch_init): Likewise. * xtensa-tdep.c (xtensa_gdbarch_init): Likewise. 2017-05-23 John Baldwin * mips-fbsd-tdep.c (MIPS_PC_REGNUM): Remove. (MIPS_FP0_REGNUM): Remove. (MIPS_FSR_REGNUM): Remove. (mips_fbsd_supply_fpregs): Use mips_regnum. (mips_fbsd_supply_gregs): Likewise. (mips_fbsd_collect_fpregs): Likewise. (mips_fbsd_collect_gregs): Likewise. 2017-05-23 John Baldwin * mips-fbsd-nat.c (getregs_supplies): Fix upper bound comparison. (getpfpregs_supplies): New function. (mips_fbsd_fetch_inferior_registers): Remove early exit and use getfpregs_supplies. (mips_fbsd_store_inferior_registers): Likewise. 2017-05-22 Pedro Alves * MAINTAINERS (Host/Native): Add John Baldwin as FreeBSD maintainer. 2017-05-22 Alan Hayward * ppc-linux-nat.c (fetch_register): Use PPC_MAX_REGISTER_SIZE. (store_register): Likewise. * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Likewise. (get_decimal_float_return_value): Likewise. (do_ppc_sysv_return_value): Likewise. (ppc64_sysv_abi_push_integer): Likewise. (ppc64_sysv_abi_push_freg): Likewise. (ppc64_sysv_abi_return_value_base): Likewise. (ppc64_sysv_abi_return_value): Likewise. * rs6000-aix-tdep.c (rs6000_push_dummy_call): Likewise. * rs6000-lynx178-tdep.c (rs6000_lynx178_push_dummy_call): Likewise. * rs6000-nat.c: Likewise. * rs6000-tdep.c (rs6000_register_to_value): Likewise. (rs6000_value_to_register): Likewise. * ppc-tdep.h (PPC_MAX_REGISTER_SIZE): Add. 2017-05-21 Tom Tromey PR rust/21466: * rust-lang.c (rust_print_type) : Print unsized arrays as "[T]", not "[T; ]". 2017-05-19 Tom Tromey PR rust/21484: * rust-lang.c (exp_descriptor_rust): New function. (rust_language_defn): Use it. * p-lang.c (pascal_language_defn): Update. * opencl-lang.c (opencl_language_defn): Update. * objc-lang.c (objc_language_defn): Update. * m2-lang.c (m2_language_defn): Update. * language.h (struct language_defn) : New member. * language.c (unknown_language_defn, auto_language_defn) (local_language_defn): Update. * go-lang.c (go_language_defn): Update. * f-lang.c (f_language_defn): Update. * d-lang.c (d_language_defn): Update. * c-lang.h (c_watch_location_expression): Declare. * c-lang.c (c_watch_location_expression): New function. (c_language_defn, cplus_language_defn, asm_language_defn) (minimal_language_defn): Use it. * breakpoint.c (watch_command_1): Call la_watch_location_expression. * ada-lang.c (ada_language_defn): Update. 2017-05-19 Rainer Orth PR tui/21482 * gdb_curses.h (NOMACROS): Define. (NCURSES_NOMACROS): Define. 2017-05-19 Rainer Orth PR tui/21482 * tui/tui-windata.c (tui_erase_data_content): Cast last mvwaddstr arg to char *. * tui/tui-wingeneral.c (box_win): Likewise. * tui/tui-winsource.c (tui_erase_source_content): Likewise. (tui_show_source_line): Likewise. (tui_show_exec_info_content): Likewise. 2017-05-19 Vladimir Mezentsev * sparc-tdep.c (sparc_structure_return_p) (sparc_arg_on_registers_p): New functions. (sparc32_store_arguments): Use them. * sparc64-tdep.c (sparc64_16_byte_align_p) (sparc64_store_floating_fields, sparc64_extract_floating_fields): Handle TYPE_CODE_ARRAY. 2017-05-17 Yao Qi * cli/cli-decode.c (add_alias_cmd): New function. * command.h (add_alias_cmd): Declare. * infcmd.c (_initialize_infcmd): Don't call add_com_alias, instead call add_alias_cmd. 2017-05-17 Pedro Alves * Makefile.in (nat_extra_makefile_frag): Rename to ... (nat_makefile_frag): ... this. All references updated. * configure.ac: Likewise. * configure.nat: Likewise. Enhance comments. * configure: Regenerate. 2017-05-15 Rainer Orth * procfs.c (procfs_create_inferior): Change prototype to match definition. 2017-05-13 Eli Zaretskii * tui/tui.c (tui_enable): Cast "unknown" to 'char *' to avoid a C++ compiler warning. 2017-05-12 Tom Tromey PR rust/21483: * rust-lang.c (rust_evaluate_subexp) : Don't recurse, just call value_struct_elt directly. 2017-05-12 Tom Tromey * rust-lang.c (rust_dump_subexp_body) : Fix. 2017-05-12 Tom Tromey * rust-lang.c (rust_print_subexp): Replace "return" with "break". 2017-05-09 Yao Qi * regcache.c: Include . (struct regcache_list): Remove. (current_regcache): Update. (get_thread_arch_aspace_regcache): Update for std::forward_list. (regcache_thread_ptid_changed): Likewise. (registers_changed_ptid): Likewise. (current_regcache_size): Likewise. 2017-05-09 Yao Qi * regcache.c [GDB_SELF_TEST]: Include selftest.h. (current_regcache_size): New function. (current_regcache_test): New function. (_initialize_regcache) [GDB_SELF_TEST]: Register the unit test. 2017-05-08 Alan Hayward * mips-tdep.c (mips_o32_return_value): Remove unused buffer. (print_gp_register_row): Use get_frame_register_value. 2017-05-08 Alan Hayward * mips-linux-tdep.c (mips_supply_gregset): Use raw_supply_zeroed. (mips_supply_fpregset): Likewise. (mips64_supply_gregset): Likewise. 2017-05-08 Alan Hayward * mn10300-linux-tdep.c (am33_supply_gregset_method): Use regcache->raw_supply_zeroed. 2017-05-06 Sergio Durigan Junior * configure.nat: Rearrange 'case' statements to match host before cpu. 2017-05-06 Sergio Durigan Junior * Makefile.in: Remove "@host_makefile_frag@". Add variables NAT_FILE, NATDEPFILES, NAT_CDEPS, LOADLIBES, MH_CFLAGS, XM_CLIBS, NAT_GENERATED_FILES, HAVE_NATIVE_GCORE_HOST. Add "@nat_extra_makefile_frag@". (Makefile): Remove dependency on "@frags@". ($(GNULIB_BUILDDIR)/Makefile): Likewise. (data-directory/Makefile): Likewise. * config/aarch64/linux.mh: Deleted; moved contents to "gdb/configure.nat". * config/alpha/alpha-linux.mh: Likewise. * config/alpha/nbsd.mh: Likewise. * config/arm/linux.mh: Likewise. * config/arm/nbsdelf.mh: Likewise. * config/i386/cygwin.mh: Likewise. * config/i386/cygwin64.mh: Likewise. * config/i386/darwin.mh: Likewise. * config/i386/fbsd.mh: Likewise. * config/i386/fbsd64.mh: Likewise. * config/i386/go32.mh: Likewise. * config/i386/i386gnu.mh: Likewise. * config/i386/i386sol2.mh: Likewise. * config/i386/linux.mh: Likewise. * config/i386/linux64.mh: Likewise. * config/i386/mingw.mh: Likewise. * config/i386/mingw64.mh: Likewise. * config/i386/nbsd64.mh: Likewise. * config/i386/nbsdelf.mh: Likewise. * config/i386/nto.mh: Likewise. * config/i386/obsd.mh: Likewise. * config/i386/obsd64.mh: Likewise. * config/i386/sol2-64.mh: Likewise. * config/ia64/linux.mh: Likewise. * config/m32r/linux.mh: Likewise. * config/m68k/linux.mh: Likewise. * config/m68k/nbsdelf.mh: Likewise. * config/m68k/obsd.mh: Likewise. * config/m88k/obsd.mh: Likewise. * config/mips/fbsd.mh: Likewise. * config/mips/linux.mh: Likewise. * config/mips/nbsd.mh: Likewise. * config/mips/obsd64.mh: Likewise. * config/pa/linux.mh: Likewise. * config/pa/nbsd.mh: Likewise. * config/pa/obsd.mh: Likewise. * config/powerpc/aix.mh: Likewise. * config/powerpc/fbsd.mh: Likewise. * config/powerpc/linux.mh: Likewise. * config/powerpc/nbsd.mh: Likewise. * config/powerpc/obsd.mh: Likewise. * config/powerpc/ppc64-linux.mh: Likewise. * config/powerpc/spu-linux.mh: Likewise. * config/s390/linux.mh: Likewise. * config/sh/nbsd.mh: Likewise. * config/sparc/fbsd.mh: Likewise. * config/sparc/linux.mh: Likewise. * config/sparc/linux64.mh: Likewise. * config/sparc/nbsd64.mh: Likewise. * config/sparc/nbsdelf.mh: Likewise. * config/sparc/obsd64.mh: Likewise. * config/sparc/sol2.mh: Likewise. * config/tilegx/linux.mh: Likewise. * config/vax/nbsdelf.mh: Likewise. * config/vax/obsd.mh: Likewise. * config/xtensa/linux.mh: Likewise. * config/i386/i386gnu.mn: New file, with excerpts from "config/i386/i386gnu.mh". * configure: Regenerate. * configure.ac: Rewrite code to use "gdb/configure.nat" instead of *.mh files under "gdb/config". * configure.nat: New file, with contents from the "gdb/config/*/*.mh" files. 2017-05-05 Tim Wiederhake * btrace.c (btrace_clear): Free insn vector. 2017-05-05 Pedro Alves * warning.m4 (build_warnings): Add -Wno-error=maybe-uninitialized. * configure: Regenerate. 2017-05-04 Pedro Alves * Makefile.in (SFILES): Add progspace-and-thread.c. (HFILES_NO_SRCDIR): Add progspace-and-thread.h. (COMMON_OBS): Add progspace-and-thread.o. * breakpoint.c: Include "progspace-and-thread.h". (update_inserted_breakpoint_locations) (insert_breakpoint_locations, create_longjmp_master_breakpoint): Use scoped_restore_current_pspace_and_thread. (create_std_terminate_master_breakpoint): Use scoped_restore_current_program_space. (remove_breakpoint): Use scoped_restore_current_pspace_and_thread. (print_breakpoint_location): Use scoped_restore_current_program_space. (bp_loc_is_permanent): Use scoped_restore_current_pspace_and_thread. (resolve_sal_pc): Use scoped_restore_current_pspace_and_thread. (download_tracepoint_locations): Use scoped_restore_current_pspace_and_thread. (breakpoint_re_set): Use scoped_restore_current_pspace_and_thread. * exec.c (exec_close_1): Use scoped_restore_current_program_space. (enum step_over_calls_kind): Moved from inferior.h. (class scoped_restore_current_thread): New class. * gdbthread.h (make_cleanup_restore_current_thread): Delete declaration. (scoped_restore_current_thread): New class. * infcmd.c: Include "common/gdb_optional.h". (continue_1, proceed_after_attach): Use scoped_restore_current_thread. (notice_new_inferior): Use scoped_restore_current_thread. * inferior.c: Include "progspace-and-thread.h". (restore_inferior, save_current_inferior): Delete. (add_inferior_command, clone_inferior_command): Use scoped_restore_current_pspace_and_thread. * inferior.h (scoped_restore_current_inferior): New class. * infrun.c: Include "progspace-and-thread.h" and "common/gdb_optional.h". (follow_fork_inferior): Use scoped_restore_current_pspace_and_thread. (scoped_restore_exited_inferior): New class. (handle_vfork_child_exec_or_exit): Use scoped_restore_exited_inferior, scoped_restore_current_pspace_and_thread, scoped_restore_current_thread and scoped_restore. (fetch_inferior_event): Use scoped_restore_current_thread. * linespec.c (decode_line_full, decode_line_1): Use scoped_restore_current_program_space. * mi/mi-main.c: Include "progspace-and-thread.h". (exec_continue): Use scoped_restore_current_thread. (mi_cmd_exec_run): Use scoped_restore_current_pspace_and_thread. (mi_cmd_trace_frame_collected): Use scoped_restore_current_thread. * proc-service.c (ps_pglobal_lookup): Use scoped_restore_current_program_space. * progspace-and-thread.c: New file. * progspace-and-thread.h: New file. * progspace.c (release_program_space, clone_program_space): Use scoped_restore_current_program_space. (restore_program_space, save_current_program_space) (save_current_space_and_thread): Delete. (switch_to_program_space_and_thread): Moved to progspace-and-thread.c. * progspace.h (save_current_program_space) (save_current_space_and_thread): Delete declarations. (scoped_restore_current_program_space): New class. * remote.c (remote_btrace_maybe_reopen): Use scoped_restore_current_thread. * symtab.c: Include "progspace-and-thread.h". (skip_prologue_sal): Use scoped_restore_current_pspace_and_thread. * thread.c (print_thread_info_1): Use scoped_restore_current_thread. (struct current_thread_cleanup): Delete. (do_restore_current_thread_cleanup) (restore_current_thread_cleanup_dtor): Rename/convert both to ... (scoped_restore_current_thread::~scoped_restore_current_thread): ... this new dtor. (make_cleanup_restore_current_thread): Rename/convert to ... (scoped_restore_current_thread::scoped_restore_current_thread): ... this new ctor. (thread_apply_all_command): Use scoped_restore_current_thread. (thread_apply_command): Use scoped_restore_current_thread. * tracepoint.c (tdump_command): Use scoped_restore_current_thread. * varobj.c (value_of_root_1): Use scoped_restore_current_thread. 2017-05-04 Pedro Alves * thread.c (make_cleanup_restore_current_thread): Move find_thread_ptid call before the is_stopped call. Assert that the thread is found. Replace is_stopped call by checking the thread's state directly. Remove unnecessary NULL-thread check. 2017-05-04 Pedro Alves * corelow.c (thread_section_name): New class. (get_core_register_section, get_core_siginfo): Use it. 2017-05-04 Andreas Arnez * corelow.c (sniff_core_bfd): Remove extra semicolon. (get_core_register_section): Remove xfree of NULL pointer. 2017-05-03 Alan Hayward * frv-linux-tdep.c (frv_linux_supply_gregset): Use raw_supply_zeroed. * regcache.c (regcache::raw_supply_zeroed): New function. * regcache.h (regcache::raw_supply_zeroed): New declaration. 2017-05-03 Simon Marchi * gdbarch.sh: Remove commented out definition of TARGET_CHAR_BIT. * gdbarch.h: Re-generate. 2017-05-03 Sergio Durigan Junior * configure: Regenerate. 2017-05-02 Simon Marchi * solib-target.c (solib_target_relocate_section_addresses): Remove num_section_bases, num_bases, segment_bases variables. 2017-05-02 Simon Marchi * common/gdb_vecs.h (DEF_VEC_I (CORE_ADDR)): Remove. 2017-05-02 Simon Marchi * solib-target.c: Include (struct lm_info_target) <~lm_info_target>: Remove. : Change type to std::vector. (library_list_start_segment, library_list_start_section, library_list_end_library, solib_target_relocate_section_addresses): Adjust. 2017-05-02 Simon Marchi * gdbarch.sh (software_single_step): Change return type to std::vector. * gdbarch.c, gdbarch.h: Re-generate. * arch/arm-get-next-pcs.c (thumb_deal_with_atomic_sequence_raw): Adjust. (arm_deal_with_atomic_sequence_raw): Adjust. (thumb_get_next_pcs_raw): Adjust. (arm_get_next_pcs_raw): Adjust. (arm_get_next_pcs): Adjust. * arch/arm-get-next-pcs.h (arm_get_next_pcs): Adjust. * aarch64-tdep.c (aarch64_software_single_step): Adjust. * alpha-tdep.c (alpha_deal_with_atomic_sequence): Adjust. (alpha_software_single_step): Adjust. * alpha-tdep.h (alpha_software_single_step): Adjust. * arm-linux-tdep.c (arm_linux_software_single_step): Adjust. * arm-tdep.c (arm_software_single_step): Adjust. (arm_breakpoint_kind_from_current_state): Adjust. * arm-tdep.h (arm_software_single_step): Adjust. * breakpoint.c (insert_single_step_breakpoint): Adjust. * cris-tdep.c (cris_software_single_step): Adjust. * mips-tdep.c (mips_deal_with_atomic_sequence): Adjust. (micromips_deal_with_atomic_sequence): Adjust. (deal_with_atomic_sequence): Adjust. (mips_software_single_step): Adjust. * mips-tdep.h (mips_software_single_step): Adjust. * moxie-tdep.c (moxie_software_single_step): Adjust. * nios2-tdep.c (nios2_software_single_step): Adjust. * ppc-tdep.h (ppc_deal_with_atomic_sequence): Adjust. * rs6000-aix-tdep.c (rs6000_software_single_step): Adjust. * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Adjust. * s390-linux-tdep.c (s390_software_single_step): Adjust. * sparc-tdep.c (sparc_software_single_step): Adjust. * spu-tdep.c (spu_software_single_step): Adjust. * tic6x-tdep.c (tic6x_software_single_step): Adjust. 2017-05-02 Simon Marchi * gdbarch.sh: Use semi-colon as field separator instead of colon. * gdbarch.h: Re-generate. 2017-05-01 Tim Wiederhake * Makefile.in (SUBDIR_PYTHON_OBS): Add py-instruction.o. (SUBDIR_PYTHON_SRCS): Add py-instruction.c. * python/py-instruction.c, python/py-instruction.h: New file. * python/py-record.c: Add py-instruction.h include. (gdbpy_initialize_record): Make gdb.Instruction a super class of gdb.RecordInstruction. * python/python-internal.h: Add gdbpy_initialize_instruction declaration. * python/python.c (do_start_initialization): Add gdbpy_initialize_instruction. 2017-05-01 Tim Wiederhake * python/py-record-btrace.c (BTPY_REQUIRE_VALID_CALL, btpy_call_type): Remove. (btrace_func_from_recpy_func): New function. (btpy_call_new, btpy_number, btpy_hash, btpy_richcompare): Remove. (btpy_call_level, btpy_call_symbol, btpy_call_instructions, btpy_call_up, btpy_call_prev_sibling, btpy_call_next_sibling): Rename to ... (recpy_bt_func_level, recpy_bt_func_symbol, recpy_bt_func_instructions, recpy_bt_func_up, recpy_bt_func_prev, recpy_bt_func_next): This. Also, use new helper functions. (btpy_list_item): Use new helper functions. (recpy_bt_function_call_history): Use new type name. (btpy_call_getset): Remove. (gdbpy_initialize_btrace): Remove code to initialize gdb.BtraceFunctionCall. * python/py-record-btrace.h (recpy_bt_func_number, recpy_btb_func_level, recpy_btb_func_symbol, recpy_bt_func_instructions, recpy_bt_func_up, recpy_bt_func_prev, recpy_bt_func_next): New export. * python/py-record.c (recpy_func_type): New static object. (recpy_func_new, recpy_func_level, recpy_func_symbol, recpy_func_instructions, recpy_func_up, recpy_func_prev, recpy_func_next): New function. (recpy_element_hash, recpy_element_richcompare): Updated comment. (recpy_func_getset): New static object. (gdbpy_initialize_record): Add code to initialize gdb.RecordInstruction. * python/py-record.h (recpy_func_type, recpy_func_new): New export. 2017-05-01 Tim Wiederhake * python/py-record-btrace.c (BTPY_REQUIRE_VALID_INSN): Remove. (btpy_object, btpy_insn_type, btpy_new): Remove. (btpy_list_object): Use gdb.RecordInstruction type instead of gdb.BtraceInstruction type. (btrace_insn_from_recpy_insn): New function. (btpy_insn_or_gap_new): Adjust comment. Use recpy_insn_new instead of btpy_new. (btpy_call_new, btpy_list_item): Do not use btpy_new anymore. (btpy_number, btpy_hash, btpy_call_level, btpy_call_symbol, btpy_call_instructions, btpy_call_up, btpy_call_prev_sibling, btpy_call_next_sibling, btpy_richcompare): Use recpy_element_object instead of btpy_object. (btpy_insn_sal, btpy_insn_pc, btpy_insn_size, btpy_insn_is_speculative, btpy_insn_data, btpy_insn_decode): Rename to ... (recpy_bt_insn_sal, recpy_bt_insn_pc, recpy_bt_insn_size, recpy_bt_insn_is_speculative, recpy_bt_insn_data, recpy_bt_insn_decode): This. Also, use new helper functions. (btpy_list_position, recpy_bt_goto): Use recpy_element_object and recpy_insn_type. (btpy_insn_getset): Remove. (gdbpy_initialize_btrace): Remove code to initialize gdb.BtraceInstruction. Use recpy_element_object. * python/py-record-btrace.h (recpy_bt_insn_number, recpy_bt_insn_sal, recpy_bt_insn_pc, recpy_bt_insn_data, recpy_bt_insn_decoded, recpy_bt_insn_size, recpy_bt_insn_is_speculative): New export. * python/py-record.c (recpy_insn_type): New static object. (recpy_insn_new, recpy_insn_sal, recpy_insn_pc, recpy_insn_data, recpy_insn_decoded, recpy_insn_size, recpy_insn_is_speculative, recpy_element_number, recpy_element_hash, recpy_element_richcompare): New function. (recpy_insn_getset): New static object. (gdbpy_initialize_record): Initialize gdb.RecordInstruction. * python/py-record.h (recpy_element_object): New typedef. (recpy_insn_type, recpy_insn_new): New export. 2017-05-01 Tim Wiederhake * py-record-btrace.c (btpy_insn_new): Removed. (btpy_insn_or_gap_new): New function. (btpy_insn_error): Removed. (btpy_insn_sal, btpy_insn_pc, btpy_insn_size, btpy_insn_is_speculative, btpy_insn_data, btpy_insn_decode): Remove code path for gaps. (recpy_bt_replay_position, recpy_bt_begin, recpy_bt_end): Call btpy_insn_or_gap_new instead of btpy_insn_new. (btpy_insn_getset): Remove btpy_insn_error. * py-record.c (recpy_gap_type): New static object. (recpy_gap_object): New typedef. (recpy_gap_new, recpy_gap_number, recpy_gap_reason_code, recpy_gap_reason_string): New function. (recpy_gap_getset): New static object. (gdbpy_initialize_record): Initialize gdb.RecordGap type. * py-record.h (recpy_gap_new): New export. 2017-05-01 Tim Wiederhake * python/py-record.c (recpy_ptid): Remove. (recpy_record_getset): Remove recpy_ptid. 2017-05-01 Tim Wiederhake * btrace.c (btrace_fetch): Set inferior_ptid. * python/py-record-btrace.c: Add "py-record.h" include. (recpy_bt_format, recpy_bt_replay_position, recpy_bt_begin, recpy_bt_end, recpy_bt_instruction_history, recpy_bt_function_call_history, recpy_bt_goto): Use ptid stored in gdb.Record object instead of current ptid. * python/py-record.c: Include new "py-record.h" file. (recpy_record_object): Moved to py-record.h. * python/py-record.h: New file. 2017-05-01 Tim Wiederhake * python/py-record-btrace.c (BTPY_REQUIRE_VALID_INSN, BTPY_REQUIRE_VALID_CALL, recpy_bt_function_call_history): Fix indentation. 2017-05-01 Joel Brobecker * MAINTAINERS: Move Daniel Jacobowitz and Mark Kettenis to the past maintainers section. 2017-04-28 Yao Qi * infcmd.c (get_return_value): Use regcache ctor, and remove cleanup. 2017-04-28 Yao Qi Pedro Alves * regcache.c (regcache::regcache): New tag dispatch ctor. (do_cooked_read): Moved above. (regcache_dup): Use the tag dispatch ctor.. * regcache.h (regcache): Declare ctor, delete copy ctor and assignment operator, remove friend regcache_dup. 2017-04-28 Yao Qi * regcache.c (regcache_dup): Assert !src->m_readonly_p and call method save instead of regcache_cpy. * regcache.h (struct regcache): Make regcache_dup a friend. 2017-04-28 Yao Qi * regcache.c (struct regcache): Move to regcache.h (regcache::arch): New method. (regcache_get_ptid): Update. (get_regcache_arch): Call arch method. (get_regcache_aspace): Call method aspace. (register_buffer): Change it to method. (regcache_save): Change it to regcache::save. (regcache_restore): Likewise. (regcache_cpy_no_passthrough): Remove the declaration. (regcache_cpy): Call methods restore and cpy_no_passthrough. (regcache_cpy_no_passthrough): Change it to method cpy_no_passthrough. (regcache_register_status): Change it to method get_register_status. (regcache_invalidate): Change it to method invalidate. (regcache_thread_ptid_changed): Use methods ptid and set_ptid. (regcache_raw_update): Change it to method raw_update. (regcache_raw_read): Likewise. (regcache_raw_read_signed): Likewise. (regcache_raw_read_unsigned): Likewise. (regcache_raw_write_signed): Likewise. (regcache_raw_write_unsigned): Likewise. (regcache_cooked_read): Likewise. (regcache_cooked_read_value): Likewise. (regcache_cooked_read_signed): Likewise. (regcache_cooked_read_unsigned): Likewise. (regcache_cooked_write_signed): Likewise. (regcache_cooked_write_unsigned): Likewise. (regcache_raw_set_cached_value): Likewise. (regcache_raw_write): Likewise. (regcache_cooked_write): Likewise. (regcache_xfer_part): Likewise. (regcache_raw_read_part): Likewise. (regcache_raw_write_part): Likewise. (regcache_cooked_read_part): Likewise. (regcache_cooked_write_part): Likewise. (regcache_raw_supply): Likewise. (regcache_raw_collect): Likewise. (regcache_transfer_regset): Likewise. (regcache_supply_regset): Likewise. (regcache_collect_regset): Likewise. (regcache_debug_print_register): Likewise. (enum regcache_dump_what): Move it to regcache.h. (regcache_dump): Change it to method dump. * regcache.h (enum regcache_dump_what): New. (class regcache): New. * target.c (target_fetch_registers): Call method debug_print_register. (target_store_registers): Likewise. 2017-04-28 Simon Marchi * windows-nat.c (struct lm_info_windows): Initialize field. (windows_make_so): Allocate lm_info_windows with new. (windows_free_so): Free lm_info_windows with delete. 2017-04-28 Simon Marchi * solib-darwin.c (struct lm_info_darwin): Initialize field. (darwin_current_sos): Allocate lm_info_darwin with new, remove cleanup. (darwin_free_so): Free lm_info_darwin with delete. 2017-04-28 Simon Marchi * solib-svr4.h (struct lm_info_svr4): Initialize fields. : Change type to bool. * solib-svr4.c (lm_info_read): Allocate lm_info_svr4 with new. (svr4_free_so): Free lm_info_svr4 with delete. (svr4_copy_library_list): Replace memcpy with call to copy constructor. (library_list_start_library, svr4_default_sos): Allocate lm_info_svr4 with new. 2017-04-28 Simon Marchi * solib-target.c (struct lm_info_target): Add destructor, initialize fields. : Change type to std::string. (library_list_start_library): Allocate lm_info_target with new. (solib_target_free_library_list): Free lm_info_target with delete. (solib_target_current_sos): Adapt to std::string. (solib_target_free_so): Free lm_info_target with delete. 2017-04-28 Simon Marchi * solib-frv.c (struct lm_info_frv): Add destructor, initialize fields. (frv_current_sos): Allocate lm_info_frv with new. (frv_relocate_main_executable): Free lm_info_frv with delete, allocate with new. (frv_clear_solib, frv_free_so): Free lm_info_frv with delete. 2017-04-28 Simon Marchi * solib-frv.c (struct lm_info_frv): Fix indentation. 2017-04-28 Simon Marchi * solib-dsbt.c (struct lm_info_dsbt): Add destructor, initialize map field. (dsbt_current_sos): Allocate lm_info_dsbt with new. (dsbt_relocate_main_executable): Free lm_info_dsbt with delete and allocate with new. (dsbt_clear_solib, dsbt_free_so): Free lm_info_dsbt with delete. 2017-04-28 Simon Marchi * solib-aix.c (struct lm_info_aix): Initialize fields in-class. : Change type to std::string. (solib_aix_new_lm_info, solib_aix_xfree_lm_info): Remove. (library_list_start_library): Allocate lm_info_aix with new. (solib_aix_free_library_list, solib_aix_free_so): Free with delete. (solib_aix_current_sos): Adapt to std::string, copy lm_info_aix with copy constructor. 2017-04-28 Simon Marchi * solist.h (struct lm_info): Remove. (struct lm_info_base): New class. (struct so_list) : Change type to lm_info_base *. * nto-tdep.c (struct lm_info): Remove. (lm_addr): Adjust. * solib-aix.c (struct lm_info): Rename to ... (struct lm_info_aix): ... this. Extend lm_info_base. (lm_info_p): Rename to ... (lm_info_aix_p): ... this, and adjust. (solib_aix_new_lm_info, solib_aix_xfree_lm_info, solib_aix_parse_libraries, library_list_start_library, solib_aix_free_library_list, solib_aix_parse_libraries, solib_aix_get_library_list, solib_aix_relocate_section_addresses, solib_aix_free_so, solib_aix_get_section_offsets, solib_aix_solib_create_inferior_hook, solib_aix_current_sos): Adjust. (struct solib_aix_inferior_data) : Adjust. * solib-darwin.c (struct lm_info): Rename to ... (struct lm_info_darwin): ... this. Extend lm_info_base. (darwin_current_sos, darwin_relocate_section_addresses): Adjust. * solib-dsbt.c (struct lm_info): Rename to ... (struct lm_info_dsbt): ... this. Extend lm_info_base. (struct dsbt_info) * solib-darwin.c (struct darwin_so_list): Remove. (darwin_current_sos): Allocate an so_list object instead of a darwin_so_list, separately allocate an lm_info object. (darwin_free_so): Free lm_info. 2017-04-28 John Baldwin * mips-tdep.c (print_gp_register_row): Replace printf_filtered with fprintf_filtered. 2017-04-28 Yao Qi * regcache.c (regcache::regcache): New function. (regcache::~regcache): New function. (regcache_xmalloc_1): Remove. (regcache_xmalloc): Call new regcache. (regcache_xfree): Call delete regcache. (get_thread_arch_aspace_regcache): Call new regcache. 2017-04-28 Yao Qi * mips-linux-nat.c (mips_linux_new_thread): Use ptid method lwp instead of ptid_get_lwp. 2017-04-28 Yao Qi * mips-linux-nat.c (mips_linux_new_thread): Get lwpid from lwp_info instead of getting from inferior_ptid. 2017-04-27 Keith Seitz * gdbtypes.c (LVALUE_REFERENCE_TO_RVALUE_BINDING_BADNESS) DIFFERENT_REFERENCE_TYPE_BADNESS): Remove. (CV_CONVERSION_BADNESS): Define. (rank_one_type): Remove overly restrictive rvalue reference rank checks. Add cv-qualifier checks and subranks for type equality. * gdbtypes.h (REFERENCE_CONVERSION_RVALUE, REFERENCE_CONVERSION_CONST_LVALUE, CV_CONVERSION_BADNESS, CV_CONVERSION_CONST, CV_CONVERSION_VOLATILE): Declare. 2017-04-27 Simon Marchi * python/py-inferior.c (inferior_to_inferior_object): Increment reference count when creating the object. 2017-04-27 Sangamesh Mallayya Ulrich Weigand * xcoffread.c (read_xcoff_symtab): Read correct function auxiliary entry if xlc -qfuncsect or gcc -ffunction-sections compiler option is used in AIX. (read_xcoff_symtab): Handle C_WEAKEXT storage class. (process_xcoff_symbol): Likewise. (scan_xcoff_symtab): Likewise. 2017-04-26 Alan Hayward * ia64-tdep.c (examine_prologue): Use get_frame_register_unsigned. (ia64_sigtramp_frame_prev_register): Use read_memory_unsigned_integer. (ia64_access_reg): Use get_frame_register_unsigned. (ia64_access_rse_reg): Likewise. (ia64_libunwind_frame_prev_register): Likewise. 2017-04-26 Jiong Wang * gdbarch.sh: New gdbarch method execute_dwarf_cfa_vendor_op. * gdbarch.c: Regenerated. * gdbarch.h: Regenerated. * dwarf2-frame.c (dwarf2_frame_state_alloc_regs): Made the visibility external. (execute_cfa_program): Call execute_dwarf_cfa_vendor_op for CFI between DW_CFA_lo_user and DW_CFA_high_user inclusive. (enum cfa_how_kind): Move to ... (struct dwarf2_frame_state_reg_info): Likewise. (struct dwarf2_frame_state): Likewise. * dwarf2-frame.h: ... here. (dwarf2_frame_state_alloc_regs): New declaration. * sparc-tdep.c (sparc_execute_dwarf_cfa_vendor_op): New function. (sparc32_gdbarch_init): Register execute_dwarf_cfa_vendor_op hook. 2017-04-26 Alan Hayward * xtensa-tdep.c (xtensa_pseudo_register_read): Use regcache_raw_read_unsigned. (xtensa_pseudo_register_write): Likewise. 2017-04-26 Alan Hayward * nds32-tdep.c (nds32_pseudo_register_read): Abort on errors. (nds32_pseudo_register_write): Likewise. 2017-04-25 Yao Qi * regcache.c (struct regcache) : Change its type to bool. (regcache_xmalloc_1): Update parameter type and callers update. 2017-04-25 Yao Qi * aarch64-tdep.c (aarch64_gdbarch_init): Don't call set_gdbarch_wchar_bit. * arm-tdep.c (arm_gdbarch_init): Likewise. 2017-04-25 Pedro Alves * common/poison.h [!HAVE_IS_TRIVIALLY_COPYABLE] (IsRelocatable) (BothAreRelocatable, memcopy, memmove): Don't define. * common/traits.h (__has_feature, HAVE_IS_TRIVIALLY_COPYABLE): New macros. 2017-04-25 Pedro Alves * common/common-defs.h: Include "common/poison.h". * common/function-view.h: (Not, Or, Requires): Move to traits.h and adjust. * common/poison.h: New file. * common/traits.h: Include . (Not, Or, Requires): New, moved from common/function-view.h. 2017-04-25 Pedro Alves * breakpoint.h (struct breakpoint): In-class initialize all fields. Make boolean fields "bool". * breakpoint.c (init_raw_breakpoint_without_location): Remove memset call and initializations no longer necessary. 2017-04-25 Pedro Alves * btrace.c (pt_btrace_insn_flags): Change parameter type to reference. (pt_btrace_insn): New function. (ftrace_add_pt): Remove memset call and use pt_btrace_insn. 2017-04-25 Pedro Alves * ada-lang.c (ada_catchpoint_location): Now a "class". Remove "base" field and inherit from "bp_location" instead. Add non-default ctor. (allocate_location_exception): Use new non-default ctor. * breakpoint.c (get_first_locp_gte_addr): Remove memset call. (init_bp_location): Convert to ... (bp_location::bp_location): ... this new ctor, and remove memset call. (base_breakpoint_allocate_location): Use the new non-default ctor. * breakpoint.h (bp_location): Now a class. Declare default and non-default ctors. In-class initialize all members. (init_bp_location): Remove declaration. 2017-04-25 Pedro Alves * common/enum-flags.h (enum_flags): Don't implement copy ctor and assignment operator. 2017-04-24 Yao Qi * doublest.c (convert_doublest_to_floatformat): Call floatformat_totalsize_bytes. 2017-04-22 Tom Tromey * mi/mi-cmd-file.c (mi_cmd_file_list_shared_libraries): Use ui_out_emit_list. * stack.c (print_frame): Use ui_out_emit_list. * mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Use ui_out_emit_list. * mi/mi-main.c (print_one_inferior) (mi_cmd_data_list_register_names) (mi_cmd_data_list_register_values, mi_cmd_list_features) (mi_cmd_list_target_features, mi_cmd_trace_frame_collected): Use ui_out_emit_list. * mi/mi-interp.c (mi_on_normal_stop_1): Use ui_out_emit_list. (mi_output_solib_attribs): Use ui_out_emit_list, ui_out_emit_tuple. * mi/mi-cmd-var.c (varobj_update_one): Use ui_out_emit_list. * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames) (mi_cmd_stack_list_args, list_args_or_locals): Use ui_out_emit_list. * disasm.c (do_assembly_only): Use ui_out_emit_list. * breakpoint.c (print_solib_event, output_thread_groups): Use ui_out_emit_list. 2017-04-22 Tom Tromey * mi/mi-main.c (print_variable_or_computed): Use ui_out_emit_tuple. * mi/mi-cmd-var.c (varobj_update_one): Use ui_out_emit_tuple. * mi/mi-cmd-stack.c (list_arg_or_local): Use ui_out_emit_tuple. 2017-04-22 Tom Tromey * tracepoint.c (tvariables_info_1) (print_one_static_tracepoint_marker): Use ui_out_emit_tuple. 2017-04-22 Tom Tromey * stack.c (print_frame_arg): Use ui_out_emit_tuple, annotate_arg_emitter. * breakpoint.c (print_mention_watchpoint) (print_mention_masked_watchpoint): Use ui_out_emit_tuple. * annotate.h (struct annotate_arg_emitter): New. 2017-04-22 Tom Tromey * record-btrace.c (record_btrace_insn_history) (record_btrace_insn_history_range, record_btrace_call_history) (record_btrace_call_history_range): Use ui_out_emit_tuple. * thread.c (do_captured_list_thread_ids, print_thread_info_1): Use ui_out_emit_tuple. * stack.c (print_frame_info): Use ui_out_emit_tuple. * solib.c (info_sharedlibrary_command): Use ui_out_emit_tuple. * skip.c (skip_info): Use ui_out_emit_tuple. * remote.c (show_remote_cmd): Use ui_out_emit_tuple. * progspace.c (print_program_space): Use ui_out_emit_tuple. * probe.c (info_probes_for_ops): Use ui_out_emit_tuple. * osdata.c (info_osdata): Use ui_out_emit_tuple. * mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Use ui_out_emit_tuple. * mi/mi-main.c (print_one_inferior, list_available_thread_groups) (output_register, mi_cmd_data_read_memory) (mi_cmd_data_read_memory_bytes, mi_load_progress) (mi_cmd_trace_frame_collected): Use ui_out_emit_tuple. * mi/mi-cmd-var.c (mi_cmd_var_list_children, varobj_update_one): Use ui_out_emit_tuple. * mi/mi-cmd-stack.c (mi_cmd_stack_list_args): Use ui_out_emit_tuple. * mi/mi-cmd-info.c (mi_cmd_info_ada_exceptions) (mi_cmd_info_gdb_mi_command): Use ui_out_emit_tuple. * linux-thread-db.c (info_auto_load_libthread_db): Use ui_out_emit_tuple. * inferior.c (print_inferior): Use ui_out_emit_tuple. * gdb_bfd.c (print_one_bfd): Use ui_out_emit_tuple. * disasm.c (do_mixed_source_and_assembly_deprecated) (do_mixed_source_and_assembly): Use ui_out_emit_tuple. * cp-abi.c (list_cp_abis): Use ui_out_emit_tuple. * cli/cli-setshow.c (cmd_show_list): Use ui_out_emit_tuple. * breakpoint.c (print_one_breakpoint_location) (print_one_breakpoint): Use ui_out_emit_tuple. * auto-load.c (print_script, info_auto_load_cmd): Use ui_out_emit_tuple. * ada-tasks.c (print_ada_task_info): Use ui_out_emit_tuple. 2017-04-21 Simon Marchi * thread.c (print_thread_info_1): Remove dead code. 2017-04-21 Jan Kratochvil * aarch64-tdep.c (selftests::aarch64_process_record_test): Make it #if GDB_SELF_TEST. * arm-tdep.c (selftests::arm_record_test): Likewise. 2017-04-21 Yao Qi * regcache.c (regcache_restore): Remove argument 2. Replace argument 3 with regcache. Get register status from src->register_status and get register contents from register_buffer (src, regnum). (regcache_cpy): Update. 2017-04-19 Pedro Alves * gdbthread.h (thread): Add missing closing parenthesis in comment. 2017-04-19 Pedro Alves * common/refcounted-object.h: New file. * gdbthread.h: Include "common/refcounted-object.h". (thread_info): Inherit from refcounted_object and add comments. (thread_info::incref, thread_info::decref) (thread_info::m_refcount): Delete. (thread_info::deletable): Use the refcounted_object::refcount() method. * inferior.c (current_inferior_): Add comment. (set_current_inferior): Increment/decrement refcounts. (prune_inferiors, remove_inferior_command): Skip inferiors marked not-deletable instead of comparing with the current inferior. (initialize_inferiors): Increment the initial inferior's refcount. * inferior.h (struct inferior): Forward declare. Include "common/refcounted-object.h". (current_inferior, set_current_inferior): Move declaration to before struct inferior's definition, and fix comment. (inferior): Inherit from refcounted_object. Add comments. * thread.c (switch_to_thread_no_regs): Reference the thread's inferior pointer directly instead of doing a ptid lookup. (switch_to_no_thread): New function. (switch_to_thread(thread_info *)): New function, factored out from ... (switch_to_thread(ptid_t)): ... this. (restore_current_thread): Delete. (current_thread_cleanup): Remove 'inf_id' and 'was_removable' fields, and add 'inf' field. (do_restore_current_thread_cleanup): Check whether old->inf is alive instead of looking up an inferior by ptid. Use switch_to_thread and switch_to_no_thread. (restore_current_thread_cleanup_dtor): Use old->inf directly instead of lookup up an inferior by id. Decref the inferior. Don't restore 'removable'. (make_cleanup_restore_current_thread): Same the inferior pointer in old, instead of the inferior number. Incref the inferior. Don't save/clear 'removable'. 2017-04-19 Pedro Alves * Makefile.in (SUBDIR_UNITTESTS_SRCS): Add unittests/scoped_restore-selftests.c. (SUBDIR_UNITTESTS_OBS): Add scoped_restore-selftests.o. * common/scoped_restore.h (scoped_restore_base): Make "class". (scoped_restore_base::release): New public method. (scoped_restore_base::scoped_restore_base): New protected ctor. (scoped_restore_base::m_saved_var): New protected field. (scoped_restore_tmpl::scoped_restore_tmpl(T*)): Initialize the scoped_restore_base base class instead of m_saved_var directly. (scoped_restore_tmpl::scoped_restore_tmpl(T*, T2)): Likewise. (scoped_restore_tmpl::scoped_restore_tmpl(const scoped_restore_tmpl&)): Likewise. (scoped_restore_tmpl::~scoped_restore_tmpl): Use the saved_var method. (scoped_restore_tmpl::saved_var): New method. (scoped_restore_tmpl::m_saved_var): Delete. * inferior.h (inferior::detaching): Now a bool. * infrun.c (prepare_for_detach): Use a scoped_restore instead of a cleanup. * unittests/scoped_restore-selftests.c: New file. 2017-04-19 Pedro Alves * Makefile.in (SUBDIR_UNITTESTS_SRCS, SUBDIR_UNITTESTS_OBS): Re-sort in alphabetic order. 2017-04-18 Pedro Alves * xml-support.c (obstack_xml_printf): Delete. * xml-support.h (obstack_xml_printf): Delete. 2017-04-18 Pedro Alves * xml-support.c (gdb_xml_parser) : New methods. : Make private and add m_ prefix. (gdb_xml_parser::body_text): New method, based on ... (gdb_xml_body_text): ... this. Adjust. (gdb_xml_parser::vdebug): New method, based on ... (gdb_xml_debug): ... this. Adjust. (gdb_xml_parser::verror): New method, based on ... (gdb_xml_error): ... this. Adjust. (gdb_xml_parser::start_element): New method, based on ... (gdb_xml_start_element): ... this. Adjust. (gdb_xml_start_element_wrapper): Defer to gdb_xml_parser::start_element and gdb_xml_parser::set_error. (gdb_xml_parser::end_element): New method, based on ... (gdb_xml_end_element_wrapper): ... this. Adjust. (gdb_xml_parser::~gdb_xml_parser): Adjust. (gdb_xml_parser::gdb_xml_parser): Adjust to field renames. (gdb_xml_parser::use_dtd): New method, based on ... (gdb_xml_use_dtd): ... this. Adjust. (gdb_xml_parser::parse): New method, based on ... (gdb_xml_parse): ... this. Adjust. (gdb_xml_parse_quick): Adjust to call the parser's parse method. (xinclude_start_include): Adjust to call the parser's name method. (xml_xinclude_default, xml_xinclude_start_doctype) (xml_xinclude_end_doctype): Adjust to call the parser's user_data method. (xml_process_xincludes): Adjust to call parser methods. * xml-support.h (gdb_xml_use_dtd, gdb_xml_parse): Delete declarations. 2017-04-18 Pedro Alves * tracefile-tfile.c (tfile_write_tdesc): Adjust to use gdb::optional. * xml-support.c: Include . (scope_level::scope_level(scope_level &&)) (scope_level::~scope_level): Delete. (scope_level::body): Now a std::string. (gdb_xml_body_text, gdb_xml_end_element): Adjust. (xinclude_parsing_data::xinclude_parsing_data): Add 'output' parameter. (xinclude_parsing_data::~xinclude_parsing_data): Delete. (xinclude_parsing_data::output): Now a std::string reference. (xinclude_start_include): Adjust. (xml_xinclude_default): Adjust. (xml_process_xincludes): Add 'output' parameter, and return bool. * xml-support.h (xml_process_xincludes): Add 'output' parameter, and return bool. * xml-tdesc.c: Include and . (tdesc_xml_cache): Delete. (tdesc_xml_cache_s): Delete. (xml_cache): Now an std::unordered_map. (tdesc_parse_xml): Adjust to use std::string and unordered_map. (target_fetch_description_xml): Change return type to gdb::optional, and adjust. * xml-tdesc.h: Include "common/gdb_optional.h" and . (target_fetch_description_xml): Change return type to gdb::optional. 2017-04-18 Pedro Alves * Makefile.in (SUBDIR_UNITTESTS_SRCS): Add unittests/optional-selftests.c. (SUBDIR_UNITTESTS_OBS): Add optional-selftests.o. * unittests/optional-selftests.c: New file. * unittests/optional/assignment/1.cc: New file. * unittests/optional/assignment/2.cc: New file. * unittests/optional/assignment/3.cc: New file. * unittests/optional/assignment/4.cc: New file. * unittests/optional/assignment/5.cc: New file. * unittests/optional/assignment/6.cc: New file. * unittests/optional/assignment/7.cc: New file. * unittests/optional/cons/copy.cc: New file. * unittests/optional/cons/default.cc: New file. * unittests/optional/cons/move.cc: New file. * unittests/optional/cons/value.cc: New file. * unittests/optional/in_place.cc: New file. * unittests/optional/observers/1.cc: New file. * unittests/optional/observers/2.cc: New file. 2017-04-18 Pedro Alves * common/gdb_optional.h: Include common/traits.h. (in_place_t): New type. (in_place): New constexpr variable. (optional::optional): Remove member initialization of m_instantiated. (optional::optional(in_place_t...)): New constructor. (optional::~optional): Use reset. (optional::optional(const optional&)): New. (optional::optional(const optional&&)): New. (optional::optional(T &)): New. (optional::optional(T &&)): New. (operator::operator=(const optional &)): New. (operator::operator=(optional &&)): New. (operator::operator= (const T &)) (operator::operator= (T &&)) (operator::emplace (Args &&... args)): Return a T&. Use reset. (operator::reset): New. (operator::m_instantiated):: Add in-class initializer. * common/traits.h: Include . (struct And): New types. 2017-04-18 Pedro Alves * xml-support.c: Include . (scope_level::scope_level(const gdb_xml_element *)) (scope_level::scope_level(scope_level&&)): New. (scope_level::~scope_level): New. (scope_level_s): Delete. (gdb_xml_parser::scopes): Now a std::vector. (gdb_xml_body_text, gdb_xml_start_element, gdb_xml_end_element): Use std::vector. (gdb_xml_parser::~gdb_xml_parser): Remove now unnecessary scope cleanup code. (gdb_xml_parser::gdb_xml_parser): Remove explicit initialization of the scopes member. Use std::vector::emplace_back. 2017-04-18 Pedro Alves * xml-support.c (gdb_xml_parser): Add ctor/dtor. Make is_xinclude a bool. (gdb_xml_end_element): Change type of first parameter. (gdb_xml_cleanup): Rename to ... (gdb_xml_parser::~gdb_xml_parser): ... this. (gdb_xml_create_parser_and_cleanup): Delete with ... (gdb_xml_parser::gdb_xml_parser): ... creation parts factored out to this new ctor. (gdb_xml_parse_quick): Create a local gdb_xml_parser instead of using gdb_xml_create_parser_and_cleanup. (xinclude_parsing_data): Add ctor/dtor. (xml_xinclude_cleanup): Delete. (xml_process_xincludes): Create a local xinclude_parsing_data instead of heap-allocating one. Create a local gdb_xml_parser instead of heap-allocating one with gdb_xml_create_parser_and_cleanup. 2017-04-18 John Baldwin PR threads/20743 * fbsd-nat.c (resume_one_thread_cb): Remove. (resume_all_threads_cb): Remove. (fbsd_resume): Use ALL_NON_EXITED_THREADS instead of iterate_over_threads. 2017-04-17 Joel Brobecker * NEWS: Create a new section for the next release branch. Rename the section of the current branch, now that it has been cut. 2017-04-17 Joel Brobecker GDB 8.0 branch created (725bf5cf125783c2a7ca4ab63d3768e220bab2db): * version.in: Bump version to 8.0.50.DATE-git. 2017-04-13 Sergio Durigan Junior PR gdb/21385 * windows-nat.c (windows_create_inferior): Declare 'allargs' independently of the host, and fix build breakage on Cygwin. 2017-04-13 Pedro Alves * inferior.c (free_inferior): Convert to ... (inferior::~inferior): ... this dtor. (inferior::inferior): New ctor, factored out from ... (add_inferior_silent): ... here. Allocate the inferior with a new expression. (delete_inferior): Call delete instead of free_inferior. * inferior.h (gdb_environ, continuation): Forward declare. (inferior): Now a class. Add in-class initialization to all members. Make boolean fields bool, except 'detaching'. (inferior::inferior): New explicit ctor. (inferior::~inferior): New. 2017-04-13 Pedro Alves * inferior.c (init_inferior_list): Delete. * inferior.h (init_inferior_list): Delete. 2017-04-13 Pedro Alves PR threads/13217 * gdb.threads/threadapply.exp (thr_apply_detach): New procedure. (top level): Call it twice, with different thread sets. 2017-04-13 Pedro Alves * thread.c: Include . (thread_array_cleanup): Delete. (scoped_inc_dec_ref): New class. (live_threads_count): New function. (set_thread_refcount): Delete. (tp_array_compar_ascending): Now a bool. (tp_array_compar): Convert to a std::sort comparison function. (thread_apply_all_command): Use std::vector and scoped_inc_dec_ref and live_threads_count. 2017-04-13 Pedro Alves * infrun.c (follow_fork_inferior): Also switch the current inferior. 2017-04-13 Pedro Alves * breakpoint.c (watch_command_1): Save watchpoint-frame info before calling create_internal_breakpoint. 2017-04-13 Pedro Alves * fork-child.c (execv_argv): New class. (breakup_args): Refactored as ... (execv_argv::init_for_no_shell): .. this method of execv_argv. Copy arguments to storage and replace separators with NULL terminators in place. (escape_bang_in_quoted_argument): Adjust to return bool. (execv_argv::execv_argv): New ctor. (execv_argv::init_for_shell): New method, factored out from fork_inferior. Don't strdup strings into the vector. (fork_inferior): Eliminate "shell" local and use execv_argv. Use Remove free_vector_argv call. 2017-04-13 Yao Qi * rx-tdep.c (rx_fpsw_type): Check tdep->rx_fpsw_type instead of tdep->rx_psw_type. 2017-04-13 Yao Qi * rl78-tdep.c (rl78_gdbarch_init): Use XCNEW instead of XNEW. * rx-tdep.c (rx_gdbarch_init): Likewise. 2017-04-13 Pedro Alves * breakpoint.h (struct breakpoint): Reindent. 2017-04-13 Pedro Alves * breakpoint.c (bp_location): Rename to ... (bp_locations): ... this. All references updated. (bp_location_count): Rename to ... (bp_locations_count): ... this. All references updated. (bp_location_placed_address_before_address_max): Rename to ... (bp_locations_placed_address_before_address_max): ... this. All references updated. (bp_location_shadow_len_after_address_max): Rename to ... (bp_locations_shadow_len_after_address_max): ... this. All references updated. (bp_location_compare_addrs): Rename to ... (bp_locations_compare_addrs): ... this. All references updated. (bp_location_compare):Rename to ... (bp_locations_compare): ... this. All references updated. (bp_location_target_extensions_update): Rename to ... (bp_locations_target_extensions_update): ... this. All references updated. 2017-04-12 Sergio Durigan Junior * Makefile.in (HFILES_NO_SRCDIR): Add "common/gdb_termios.h". * common/common.m4: Check headers 'termios.h', 'termio.h' and 'sgtty.h'. * common/gdb_termios.h: New file, with parts of "terminal.h". * inflow.c: Include "gdb_termios.h". * ser-unix.c: Include "gdb_termios.h". * terminal.h: Move terminal-related defines to "common/gdb_termios.h". 2017-04-12 Tom Tromey * probe.c (parse_probes): Update. * location.h (delete_event_location): Don't declare. (event_location_deleter::operator()): Update. * location.c (event_location_deleter::operator()): Rename from delete_event_location. * linespec.h (linespec_result) : Change type to event_location_up. * linespec.c (canonicalize_linespec, event_location_to_sals) (decode_objc): Update. (linespec_result): Don't call delete_event_location. * breakpoint.c (create_breakpoints_sal) (bkpt_probe_create_sals_from_location) (strace_marker_create_sals_from_location): Update. 2017-04-12 Tom Tromey * linespec.h (struct linespec_result): Add constructor and destructor. (init_linespec_result, destroy_linespec_result) (make_cleanup_destroy_linespec_result): Don't declare. * linespec.c (init_linespec_result): Remove. (linespec_result::~linespec_result): Rename from destroy_linespec_result. Update. (cleanup_linespec_result, make_cleanup_destroy_linespec_result): Remove. * breakpoint.c (create_breakpoint, break_range_command) (decode_location_default): Update. * ax-gdb.c (agent_command_1): Update. 2017-04-12 Tom Tromey * remote.c (remote_download_tracepoint): Update. * python/py-breakpoint.c (bppy_get_location): Update. * guile/scm-breakpoint.c (bpscm_print_breakpoint_smob) (gdbscm_breakpoint_location): Update. * elfread.c (elf_gnu_ifunc_resolver_return_stop): Update. * breakpoint.h (struct breakpoint) : Change type to event_location_up. * breakpoint.c (create_overlay_event_breakpoint) (create_longjmp_master_breakpoint) (create_std_terminate_master_breakpoint) (create_exception_master_breakpoint) (breakpoint_event_location_empty_p, print_breakpoint_location) (print_one_breakpoint_location, create_thread_event_breakpoint) (init_breakpoint_sal, create_breakpoint) (print_recreate_ranged_breakpoint, break_range_command) (init_ada_exception_breakpoint, say_where): Update. (base_breakpoint_dtor): Don't call delete_event_location. (bkpt_print_recreate, tracepoint_print_recreate) (dprintf_print_recreate, update_static_tracepoint) (breakpoint_re_set_default): Update. 2017-04-12 Tom Tromey * compile/compile-loc2c.c (compute_stack_depth_worker): Change type of "to_do". Update. (compute_stack_depth): Use std::vector. 2017-04-12 Tom Tromey * printcmd.c (find_instruction_backward): Use std::vector. 2017-04-12 Tom Tromey * symfile.c (objfilep): Remove typedef. (reread_symbols): Use a std::vector. 2017-04-12 Tom Tromey * mi/mi-main.c (exec_direction_forward): Remove. (exec_reverse_continue, mi_execute_command): Use scoped_restore. * guile/scm-ports.c (ioscm_with_output_to_port_worker): Use scoped_restore. * guile/guile.c (guile_repl_command, guile_command) (gdbscm_execute_gdb_command): Use scoped_restore. * go-exp.y (go_parse): Use scoped_restore. * d-exp.y (d_parse): Use scoped_restore. * cli/cli-decode.c (cmd_func): Use scoped_restore. * c-exp.y (c_parse): Use scoped_restore. 2017-04-12 Tom Tromey * mi/mi-parse.h (struct mi_parse): Add constructor, destructor. (mi_parse): Update return type. (mi_parse_free): Remove. * mi/mi-parse.c (mi_parse::mi_parse): New constructor. (mi_parse::~mi_parse): Rename from mi_parse_free. (mi_parse_cleanup): Remove. (mi_parse): Return a unique_ptr. Use new. * mi/mi-main.c (mi_execute_command): Update. 2017-04-12 Tom Tromey * location.c (explicit_location_lex_one): Return a unique_xmalloc_ptr. (string_to_explicit_location): Update. Remove cleanups. 2017-04-12 Tom Tromey * gnu-v3-abi.c (value_and_voffset_p): Remove typedef. (compare_value_and_voffset): Change type. Update. (compute_vtable_size): Change type of "offset_vec". (gnuv3_print_vtable): Use std::vector. Remove cleanups. (gnuv3_get_typeid): Remove extraneous declaration. 2017-04-12 Tom Tromey * charset.h (wchar_iterator): Fix comment. 2017-04-12 Tom Tromey * charset.c (iconv_wrapper): New class. (cleanup_iconv): Remove. (convert_between_encodings): Use it. 2017-04-12 Tom Tromey * symfile.h (increment_reading_symtab): Update type. * symfile.c (decrement_reading_symtab): Remove. (increment_reading_symtab): Return a scoped_restore_tmpl. * psymtab.c (psymtab_to_symtab): Update. * dwarf2read.c (dw2_instantiate_symtab): Update. 2017-04-12 Tom Tromey * jit.c (struct jit_reader): Declare separately. Add constructor and destructor. Change type of "handle". (loaded_jit_reader): Define separately. (jit_reader_load): Update. New "new". (jit_reader_unload_command): Use "delete". * gdb-dlfcn.h (struct dlclose_deleter): New. (gdb_dlhandle_up): New typedef. (gdb_dlopen, gdb_dlsym): Update types. (gdb_dlclose): Remove. * gdb-dlfcn.c (gdb_dlopen): Return a gdb_dlhandle_up. (gdb_dlsym): Change type of "handle". (make_cleanup_dlclose): Remove. (dlclose_deleter::operator()): Rename from gdb_dlclose. * compile/compile-c-support.c (load_libcc): Update. 2017-04-12 Tom Tromey * symtab.h (find_pcs_for_symtab_line): Change return type. * symtab.c (find_pcs_for_symtab_line): Change return type. * python/py-linetable.c (build_line_table_tuple_from_pcs): Change type of "vec". Update. (ltpy_get_pcs_for_line): Update. * linespec.c (decode_digits_ordinary): Update. 2017-04-12 Tom Tromey * tracepoint.c (actions_command): Update. * python/python.c (python_command, python_interactive_command): Update. * mi/mi-cmd-break.c (mi_cmd_break_commands): Update. * guile/guile.c (guile_command): Update. * defs.h (read_command_lines, read_command_lines_1): Return command_line_up. (command_lines_deleter): New struct. (command_line_up): New typedef. * compile/compile.c (compile_code_command) (compile_print_command): Update. * cli/cli-script.h (get_command_line, copy_command_lines): Return command_line_up. (make_cleanup_free_command_lines): Remove. * cli/cli-script.c (get_command_line, read_command_lines_1) (copy_command_lines): Return command_line_up. (while_command, if_command, read_command_lines, define_command) (document_command): Update. (do_free_command_lines_cleanup, make_cleanup_free_command_lines): Remove. * breakpoint.h (breakpoint_set_commands): Change type of "commands". * breakpoint.c (breakpoint_set_commands): Change type of "commands". Update. (do_map_commands_command, update_dprintf_command_list) (create_tracepoint_from_upload): Update. 2017-04-12 Tom Tromey * tracepoint.c (scope_info): Update. * spu-tdep.c (spu_catch_start): Update. * python/python.c (gdbpy_decode_line): Update. * python/py-finishbreakpoint.c (bpfinishpy_init): Update. * python/py-breakpoint.c (bppy_init): Update. * probe.c (parse_probes): Update. * mi/mi-cmd-break.c (mi_cmd_break_insert_1): Update. * location.h (event_location_deleter): New struct. (event_location_up): New typedef. (new_linespec_location, new_address_location, new_probe_location) (new_explicit_location, copy_event_location) (string_to_event_location, string_to_event_location_basic) (string_to_explicit_location): Update return type. (make_cleanup_delete_event_location): Remove. * location.c (new_linespec_location, new_address_location) (new_probe_location, new_explicit_location, copy_event_location): Return event_location_up. (delete_event_location_cleanup) (make_cleanup_delete_event_location): Remove. (string_to_explicit_location, string_to_event_location_basic) (string_to_event_location): Return event_location_up. * linespec.c (canonicalize_linespec, event_location_to_sals) (decode_line_with_current_source) (decode_line_with_last_displayed, decode_objc): Update. * guile/scm-breakpoint.c (gdbscm_register_breakpoint_x): Update. * completer.c (location_completer): Update. * cli/cli-cmds.c (edit_command, list_command): Update. * breakpoint.c (create_overlay_event_breakpoint) (create_longjmp_master_breakpoint) (create_std_terminate_master_breakpoint) (create_exception_master_breakpoint) (create_thread_event_breakpoint): Update. (init_breakpoint_sal): Update. Remove some dead code. (create_breakpoint_sal): Change type of "location". Update. (create_breakpoints_sal, create_breakpoint, break_command_1) (dprintf_command, break_range_command, until_break_command) (init_ada_exception_breakpoint) (strace_marker_create_sals_from_location) (update_static_tracepoint, trace_command, ftrace_command) (strace_command, create_tracepoint_from_upload): Update. * break-catch-throw.c (re_set_exception_catchpoint): Update. * ax-gdb.c (agent_command_1): Update. 2017-04-12 Pedro Alves * Makefile.in (ALL_TARGET_OBS): Add i386-go32-tdep.o. * configure.tgt: Handle i[34567]86-*-go32* and i[34567]86-*-msdosdjgpp*. * i386-tdep.c (i386_svr4_reg_to_regnum): Make extern. (i386_go32_init_abi, i386_coff_osabi_sniffer): Moved to i386-go32-tdep.c. (_initialize_i386_tdep): DJGPP bits moved to i386-go32-tdep.c. * i386-go32-tdep.c: New file. * i386-tdep.h (tdesc_i386_mmx, i386_svr4_reg_to_regnum): New declarations. 2017-04-12 Simon Marchi * aix-thread.c (pd_status2str): Change return type to const char *. 2017-04-12 Pedro Alves * i386-tdep.c (i386_elf_init_abi, i386_go32_init_abi): Remove calls to set_gdbarch_gnu_triplet_regexp. 2017-04-12 Pedro Alves PR gdb/21323 * c-lang.c (cplus_primitive_types) : New enum value. (cplus_language_arch_info): Register cplus_primitive_type_wchar_t. * gdbtypes.h (struct builtin_type) : New field. * gdbtypes.c (gdbtypes_post_init): Create the "wchar_t" type. * gdbarch.sh (wchar_bit, wchar_signed): New per-arch values. * gdbarch.h, gdbarch.c: Regenerate. * aarch64-tdep.c (aarch64_gdbarch_init): Override gdbarch_wchar_bit and gdbarch_wchar_signed. * alpha-tdep.c (alpha_gdbarch_init): Likewise. * arm-tdep.c (arm_gdbarch_init): Likewise. * avr-tdep.c (avr_gdbarch_init): Likewise. * h8300-tdep.c (h8300_gdbarch_init): Likewise. * i386-nto-tdep.c (i386nto_init_abi): Likewise. * i386-tdep.c (i386_go32_init_abi): Likewise. * m32r-tdep.c (m32r_gdbarch_init): Likewise. * moxie-tdep.c (moxie_gdbarch_init): Likewise. * nds32-tdep.c (nds32_gdbarch_init): Likewise. * rs6000-aix-tdep.c (rs6000_aix_init_osabi): Likewise. * sh-tdep.c (sh_gdbarch_init): Likewise. * sparc-tdep.c (sparc32_gdbarch_init): Likewise. * sparc64-tdep.c (sparc64_init_abi): Likewise. * windows-tdep.c (windows_init_abi): Likewise. * xstormy16-tdep.c (xstormy16_gdbarch_init): Likewise. 2017-04-12 Pedro Alves PR c++/21323 * c-lang.c (cplus_primitive_types) : New enum values. (cplus_language_arch_info): Register cplus_primitive_type_char16_t and cplus_primitive_type_char32_t. * dwarf2read.c (read_base_type) : If bit size is 16 or 32, use the archtecture's built-in type for char16_t and char32_t, respectively. Otherwise, fallback to init_integer_type as before, but make the type unsigned, and issue a complaint. * gdbtypes.c (gdbtypes_post_init): Make char16_t and char32_t unsigned. 2017-04-12 Alan Hayward * m32r-tdep.c (M32R_ARG_REGISTER_SIZE): Added. (m32r_push_dummy_call): Use M32R_ARG_REGISTER_SIZE. 2017-04-12 Sergio Durigan Junior * windows-nat.c (windows_create_inferior): Declare 'toexec' as 'const char *'. 2017-04-12 Sergio Durigan Junior * common/common-utils.c (free_vector_argv): New function. * common/common-utils.h: Include . (free_vector_argv): New prototype. * darwin-nat.c (darwin_create_inferior): Rewrite function prototype in order to constify "exec_file" and accept a "std::string" for "allargs". * fork-child.c: Include . (breakup_args): Rewrite function, using C++. (fork_inferior): Rewrite function header, constify "exec_file_arg" and accept "std::string" for "allargs". Update the code to calculate "argv" based on "allargs". Update calls to "exec_fun" and "execvp". * gnu-nat.c (gnu_create_inferior): Rewrite function prototype in order to constify "exec_file" and accept a "std::string" for "allargs". * go32-nat.c (go32_create_inferior): Likewise. * inf-ptrace.c (inf_ptrace_create_inferior): Likewise. * infcmd.c (run_command_1): Constify "exec_file". Use "std::string" for inferior arguments. * inferior.h (fork_inferior): Update prototype. * linux-nat.c (linux_nat_create_inferior): Rewrite function prototype in order to constify "exec_file" and accept a "std::string" for "allargs". * nto-procfs.c (procfs_create_inferior): Likewise. * procfs.c (procfs_create_inferior): Likewise. * remote-sim.c (gdbsim_create_inferior): Likewise. * remote.c (extended_remote_run): Update code to accept "std::string" as argument. (extended_remote_create_inferior): Rewrite function prototype in order to constify "exec_file" and accept a "std::string" for "allargs". * rs6000-nat.c (super_create_inferior): Likewise. (rs6000_create_inferior): Likewise. * target.h (struct target_ops) : Likewise. * windows-nat.c (windows_create_inferior): Likewise. 2017-04-11 Pedro Alves * thread.c: Fix whitespace throughout. 2017-04-11 Philipp Rudo * linux-nat.c (linux_nat_detach): Remove delete_lwp call. 2017-04-11 Alan Hayward * arm-tdep.c (arm_store_return_value): Use FP_REGISTER_SIZE 2017-04-10 Sergio Durigan Junior PR gdb/21364 * osdata.c (info_osdata): Check if 'type' is an empty string instead of NULL. 2017-04-10 Pedro Alves * thread.c (add_thread_silent, delete_thread_1, find_thread_ptid) (ptid_to_global_thread_id, in_thread_list) (do_captured_list_thread_ids, set_resumed, set_running) (set_executing, set_stop_requested, finish_thread_state) (validate_registers_access, can_access_registers_ptid) (print_thread_info_1, switch_to_thread) (do_restore_current_thread_cleanup) (make_cleanup_restore_current_thread, thread_command) (thread_name_command): Use operator== instead of ptid_equal. 2017-04-10 Pedro Alves * thread.c (struct current_thread_cleanup) : Delete field. (current_thread_cleanup_chain): Delete. (restore_current_thread_cleanup_dtor) (make_cleanup_restore_current_thread): Remove references to current_thread_cleanup_chain. 2017-04-10 Alan Hayward * msp430-tdep.c (msp430_pseudo_register_read): Never return REG_UNKNOWN. 2017-04-10 Yao Qi PR gdb/19942 * gdbthread.h (thread_info::deletable): New method. (thread_info::incref): New method. (thread_info::decref): New method. (thread_info::refcount): Move it to private. * infrun.c (save_stop_context): Call inc_refcount. (release_stop_context_cleanup): Likewise. * thread.c (set_thread_exited): New function. (init_thread_list): Delete "tp" only it is deletable, otherwise call set_thread_exited. (delete_thread_1): Call set_thread_exited. (current_thread_cleanup) : Remove. : New field. (restore_current_thread_ptid_changed): Removed. (do_restore_current_thread_cleanup): Adjust. (restore_current_thread_cleanup_dtor): Don't call find_thread_ptid. (set_thread_refcount): Use dec_refcount. (make_cleanup_restore_current_thread): Adjust. (thread_apply_all_command): Call inc_refcount. (_initialize_thread): Don't call observer_attach_thread_ptid_changed. 2017-04-10 Yao Qi * thread.c (delete_thread_1): Hoist code on marking thread as exited. 2017-04-09 Simon Marchi * windows-nat.c (windows_detach): Initialize ptid with minus_one_ptid. 2017-04-07 Simon Marchi * unittests/ptid-selftests.c: Fix erroneous assert messages. 2017-04-07 Alan Hayward * bfin-tdep.c (BFIN_MAX_REGISTER_SIZE): Add. (bfin_pseudo_register_read): Use BFIN_MAX_REGISTER_SIZE. (bfin_pseudo_register_write): Likewise 2017-04-06 Simon Marchi * common/ptid.h (struct ptid): Change to... (class ptid_t): ... this. : New constructors. : New methods. : New static methods. : Rename to... : ...this. : Rename to... : ...this. : Rename to... : ...this. (ptid_build, ptid_get_pid, ptid_get_lwp, ptid_get_tid, ptid_equal, ptid_is_pid, ptid_lwp_p, ptid_tid_p, ptid_match): Take ptid arguments as references, move comment to class ptid_t. * common/ptid.c (null_ptid, minus_one_ptid): Initialize with ptid_t static methods. (ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_tid, ptid_equal, ptid_is_pid, ptid_lwp_p, ptid_tid_p, ptid_match): Take ptid arguments as references, implement using ptid_t methods. * unittests/ptid-selftests.c: New file. * Makefile.in (SUBDIR_UNITTESTS_SRCS): Add unittests/ptid-selftests.c. (SUBDIR_UNITTESTS_OBS): Add unittests/ptid-selftests.o. 2017-04-06 Thomas Preud'homme * python/python.c (python_run_simple_file): Cast mode literal to non-const char pointer as expected by PyFile_FromString. 2017-04-05 Simon Marchi * common/ptid.c (ptid_lwp_p, ptid_tid_p): Remove comparison with minus_one_ptid and null_ptid. 2017-04-05 Pedro Alves * warning.m4 (build_warnings): Remove -Wno-write-strings. * configure: Regenerate. 2017-04-05 Pedro Alves * ada-exp.y (yyerror): Constify. * ada-lang.c (bound_name, get_selections) (ada_variant_discrim_type) (ada_variant_discrim_name, ada_value_struct_elt) (ada_lookup_struct_elt_type, is_unchecked_variant) (ada_which_variant_applies, standard_exc, ada_get_next_arg) (catch_ada_exception_command_split) (catch_ada_assert_command_split, catch_assert_command) (ada_op_name): Constify. * ada-lang.h (ada_yyerror, get_selections) (ada_variant_discrim_name, ada_value_struct_elt): Constify. * arc-tdep.c (arc_print_frame_cache): Constify. * arm-tdep.c (arm_skip_stub): Constify. * ax-gdb.c (gen_binop, gen_struct_ref_recursive, gen_struct_ref) (gen_aggregate_elt_ref): Constify. * bcache.c (print_bcache_statistics): Constify. * bcache.h (print_bcache_statistics): Constify. * break-catch-throw.c (catch_exception_command_1): * breakpoint.c (struct ep_type_description::description): Constify. (add_solib_catchpoint): Constify. (catch_fork_command_1): Add cast. (add_catch_command): Constify. * breakpoint.h (add_catch_command, add_solib_catchpoint): Constify. * bsd-uthread.c (bsd_uthread_state): Constify. * buildsym.c (patch_subfile_names): Constify. * buildsym.h (next_symbol_text_func, patch_subfile_names): Constify. * c-exp.y (yyerror): Constify. (token::oper): Constify. * c-lang.h (c_yyerror, cp_print_class_member): Constify. * c-varobj.c (cplus_describe_child): Constify. * charset.c (find_charset_names): Add cast. (find_charset_names): Constify array and add const_cast. * cli/cli-cmds.c (complete_command, cd_command): Constify. (edit_command): Constify. * cli/cli-decode.c (lookup_cmd): Constify. * cli/cli-dump.c (dump_memory_command, dump_value_command): Constify. (struct dump_context): Constify. (add_dump_command, restore_command): Constify. * cli/cli-script.c (get_command_line): Constify. * cli/cli-script.h (get_command_line): Constify. * cli/cli-utils.c (check_for_argument): Constify. * cli/cli-utils.h (check_for_argument): Constify. * coff-pe-read.c (struct read_pe_section_data): Constify. * command.h (lookup_cmd): Constify. * common/print-utils.c (decimal2str): Constify. * completer.c (gdb_print_filename): Constify. * corefile.c (set_gnutarget): Constify. * cp-name-parser.y (yyerror): Constify. * cp-valprint.c (cp_print_class_member): Constify. * cris-tdep.c (cris_register_name, crisv32_register_name): Constify. * d-exp.y (yyerror): Constify. (struct token::oper): Constify. * d-lang.h (d_yyerror): Constify. * dbxread.c (struct header_file_location::name): Constify. (add_old_header_file, add_new_header_file, last_function_name) (dbx_next_symbol_text, add_bincl_to_list) (find_corresponding_bincl_psymtab, set_namestring) (find_stab_function_addr, read_dbx_symtab, start_psymtab) (dbx_end_psymtab, read_ofile_symtab, process_one_symbol): * defs.h (command_line_input, print_address_symbolic) (deprecated_readline_begin_hook): Constify. * dwarf2read.c (anonymous_struct_prefix, dwarf_bool_name): Constify. * event-top.c (handle_line_of_input): Constify and add cast. * exceptions.c (catch_errors): Constify. * exceptions.h (catch_errors): Constify. * expprint.c (print_subexp_standard, op_string, op_name) (op_name_standard, dump_raw_expression, dump_raw_expression): * expression.h (op_name, op_string, dump_raw_expression): Constify. * f-exp.y (yyerror): Constify. (struct token::oper): Constify. (struct f77_boolean_val::name): Constify. * f-lang.c (f_word_break_characters): Constify. * f-lang.h (f_yyerror): Constify. * fork-child.c (fork_inferior): Add cast. * frv-tdep.c (struct gdbarch_tdep::register_names): Constify. (new_variant): Constify. * gdbarch.sh (pstring_ptr, pstring_list): Constify. * gdbarch.c: Regenerate. * gdbcore.h (set_gnutarget): Constify. * go-exp.y (yyerror): Constify. (token::oper): Constify. * go-lang.h (go_yyerror): Constify. * go32-nat.c (go32_sysinfo): Constify. * guile/scm-breakpoint.c (gdbscm_breakpoint_expression): Constify. * guile/scm-cmd.c (cmdscm_function): Constify. * guile/scm-param.c (pascm_param_value): Constify. * h8300-tdep.c (h8300_register_name, h8300s_register_name) (h8300sx_register_name): Constify. * hppa-tdep.c (hppa32_register_name, hppa64_register_name): Constify. * ia64-tdep.c (ia64_register_names): Constify. * infcmd.c (construct_inferior_arguments): Constify. (path_command, attach_post_wait): Constify. * language.c (show_range_command, show_case_command) (unk_lang_error): Constify. * language.h (language_defn::la_error) (language_defn::la_name_of_this): Constify. * linespec.c (decode_line_2): Constify. * linux-thread-db.c (thread_db_err_str): Constify. * lm32-tdep.c (lm32_register_name): Constify. * m2-exp.y (yyerror): Constify. * m2-lang.h (m2_yyerror): Constify. * m32r-tdep.c (m32r_register_names): Constify and make static. * m68hc11-tdep.c (m68hc11_register_names): Constify. * m88k-tdep.c (m88k_register_name): Constify. * macroexp.c (appendmem): Constify. * mdebugread.c (fdr_name, add_data_symbol, parse_type) (upgrade_type, parse_external, parse_partial_symbols) (mdebug_next_symbol_text, cross_ref, mylookup_symbol, new_psymtab) (new_symbol): Constify. * memattr.c (mem_info_command): Constify. * mep-tdep.c (register_name_from_keyword): Constify. * mi/mi-cmd-env.c (mi_cmd_env_path, _initialize_mi_cmd_env): Constify. * mi/mi-cmd-stack.c (list_args_or_locals): Constify. * mi/mi-cmd-var.c (mi_cmd_var_show_attributes): Constify. * mi/mi-main.c (captured_mi_execute_command): Constify and add cast. (mi_execute_async_cli_command): Constify. * mips-tdep.c (mips_register_name): Constify. * mn10300-tdep.c (register_name, mn10300_generic_register_name) (am33_register_name, am33_2_register_name) * moxie-tdep.c (moxie_register_names): Constify. * nat/linux-osdata.c (osdata_type): Constify fields. * nto-tdep.c (nto_parse_redirection): Constify. * objc-lang.c (lookup_struct_typedef, lookup_objc_class) (lookup_child_selector): Constify. (objc_methcall::name): Constify. * objc-lang.h (lookup_objc_class, lookup_child_selector) (lookup_struct_typedef): Constify. * objfiles.c (pc_in_section): Constify. * objfiles.h (pc_in_section): Constify. * p-exp.y (struct token::oper): Constify. (yyerror): Constify. * p-lang.h (pascal_yyerror): Constify. * parser-defs.h (op_name_standard): Constify. (op_print::string): Constify. (exp_descriptor::op_name): Constify. * printcmd.c (print_address_symbolic): Constify. * psymtab.c (print_partial_symbols): Constify. * python/py-breakpoint.c (stop_func): Constify. (bppy_get_expression): Constify. * python/py-cmd.c (cmdpy_completer::name): Constify. (cmdpy_function): Constify. * python/py-event.c (evpy_add_attribute) (gdbpy_initialize_event_generic): Constify. * python/py-event.h (evpy_add_attribute) (gdbpy_initialize_event_generic): Constify. * python/py-evts.c (add_new_registry): Constify. * python/py-finishbreakpoint.c (outofscope_func): Constify. * python/py-framefilter.c (get_py_iter_from_func): Constify. * python/py-inferior.c (get_buffer): Add cast. * python/py-param.c (parm_constant::name): Constify. * python/py-unwind.c (fprint_frame_id): Constify. * python/python.c (gdbpy_parameter_value): Constify. * remote-fileio.c (remote_fio_func_map): Make 'name' const. * remote.c (memory_packet_config::name): Constify. (show_packet_config_cmd, remote_write_bytes) (remote_buffer_add_string): * reverse.c (exec_reverse_once): Constify. * rs6000-tdep.c (variant::name, variant::description): Constify. * rust-exp.y (rustyyerror): Constify. * rust-lang.c (rust_op_name): Constify. * rust-lang.h (rustyyerror): Constify. * serial.h (serial_ops::name): Constify. * sh-tdep.c (sh_sh_register_name, sh_sh3_register_name) (sh_sh3e_register_name, sh_sh2e_register_name) (sh_sh2a_register_name, sh_sh2a_nofpu_register_name) (sh_sh_dsp_register_name, sh_sh3_dsp_register_name) (sh_sh4_register_name, sh_sh4_nofpu_register_name) (sh_sh4al_dsp_register_name): Constify. * sh64-tdep.c (sh64_register_name): Constify. * solib-darwin.c (lookup_symbol_from_bfd): Constify. * spu-tdep.c (spu_register_name, info_spu_dma_cmdlist): Constify. * stabsread.c (patch_block_stabs, read_type_number) (ref_map::stabs, ref_add, process_reference) (symbol_reference_defined, define_symbol, define_symbol) (error_type, read_type, read_member_functions, read_cpp_abbrev) (read_one_struct_field, read_struct_fields, read_baseclasses) (read_tilde_fields, read_struct_type, read_array_type) (read_enum_type, read_sun_builtin_type, read_sun_floating_type) (read_huge_number, read_range_type, read_args, common_block_start) (find_name_end): Constify. * stabsread.h (common_block_start, define_symbol) (process_one_symbol, symbol_reference_defined, ref_add): * symfile.c (get_section_index, add_symbol_file_command): * symfile.h (get_section_index): Constify. * target-descriptions.c (tdesc_type::name): Constify. (tdesc_free_type): Add cast. * target.c (find_default_run_target): (add_deprecated_target_alias, find_default_run_target) (target_announce_detach): Constify. (do_option): Constify. * target.h (add_deprecated_target_alias): Constify. * thread.c (print_thread_info_1): Constify. * top.c (deprecated_readline_begin_hook, command_line_input): Constify. (init_main): Add casts. * top.h (handle_line_of_input): Constify. * tracefile-tfile.c (tfile_write_uploaded_tsv): Constify. * tracepoint.c (tvariables_info_1, trace_status_mi): Constify. (tfind_command): Rename to ... (tfind_command_1): ... this and constify. (tfind_command): New function. (tfind_end_command, tfind_start_command): Adjust. (encode_source_string): Constify. * tracepoint.h (encode_source_string): Constify. * tui/tui-data.c (tui_partial_win_by_name): Constify. * tui/tui-data.h (tui_partial_win_by_name): Constify. * tui/tui-source.c (tui_set_source_content_nil): Constify. * tui/tui-source.h (tui_set_source_content_nil): Constify. * tui/tui-win.c (parse_scrolling_args): Constify. * tui/tui-windata.c (tui_erase_data_content): Constify. * tui/tui-windata.h (tui_erase_data_content): Constify. * tui/tui-winsource.c (tui_erase_source_content): Constify. * tui/tui.c (tui_enable): Add cast. * utils.c (defaulted_query): Constify. (init_page_info): Add cast. (puts_debug, subset_compare): Constify. * utils.h (subset_compare): Constify. * varobj.c (varobj_format_string): Constify. * varobj.h (varobj_format_string): Constify. * vax-tdep.c (vax_register_name): Constify. * windows-nat.c (windows_detach): Constify. * xcoffread.c (process_linenos, xcoff_next_symbol_text): Constify. * xml-support.c (gdb_xml_end_element): Constify. * xml-tdesc.c (tdesc_start_reg): Constify. * xstormy16-tdep.c (xstormy16_register_name): Constify. * xtensa-tdep.c (xtensa_find_register_by_name): Constify. * xtensa-tdep.h (xtensa_register_t::name): Constify. 2017-04-05 Pedro Alves * proc-api.c (struct trans): Constify. (procfs_note): Constify. * proc-events.c (struct trans, syscall_table): * proc-flags.c (struct trans): Constify. * proc-utils.h (procfs_note): Constify. * proc-why.c (struct trans): Constify. * procfs.c (dead_procinfo, find_syscall, proc_warn, proc_error) (procfs_detach): Constify. * sol-thread.c (struct string_map): Constify. (td_err_string, td_state_string): Constify. 2017-04-05 Pedro Alves * proc-api.c (procfs_filename): Don't initialize procfs_filename. (prepare_to_trace): Assume procfs_filename is non-NULL. (_initialize_proc_api): Give procfs_filename a default value here. 2017-04-05 Pedro Alves * break-catch-throw.c (handle_gnu_v3_exceptions): Constify 'cond_string' parameter. (extract_exception_regexp): Constify 'string' parameter. (catch_exception_command_1): Constify. * breakpoint.c (init_catchpoint) (create_fork_vfork_event_catchpoint): Constify 'cond_string' parameter. (ep_parse_optional_if_clause, catch_fork_command_1) (catch_exec_command_1): Constify. * breakpoint.h (init_catchpoint): Constify 'cond_string' parameter. (ep_parse_optional_if_clause): Constify. * cli/cli-utils.c (remove_trailing_whitespace) (check_for_argument): Constify. * cli/cli-utils.h (remove_trailing_whitespace): Constify and add non-const overload. (check_for_argument): Likewise. 2017-04-05 Pedro Alves * event-top.c (command_line_handler): Add cast to execute_command call. * record-btrace.c (cmd_record_btrace_bts_start) (cmd_record_btrace_pt_start, cmd_record_btrace_start) (cmd_record_btrace_start): Add cast to execute_command call. * record-full.c (record_full_goto_insn): * record.c (record_start, record_stop): Add cast to execute_command_to_string calls. (cmd_record_start): Add cast to execute_command calls. 2017-04-05 Pedro Alves * python/python-internal.h (gdb_PyArg_ParseTupleAndKeywords): New static inline function. * python/py-arch.c (archpy_disassemble): Constify 'keywords' array and use gdb_PyArg_ParseTupleAndKeywords. * python/py-cmd.c (cmdpy_init): Likewise. * python/py-finishbreakpoint.c (bpfinishpy_init): Likewise. * python/py-inferior.c (infpy_read_memory, infpy_write_memory) (infpy_search_memory): Likewise. * python/py-objfile.c (objfpy_add_separate_debug_file) (gdbpy_lookup_objfile): Likewise. * python/py-symbol.c (gdbpy_lookup_symbol) (gdbpy_lookup_global_symbol): Likewise. * python/py-type.c (gdbpy_lookup_type): Likewise. * python/py-value.c (valpy_lazy_string, valpy_string): Likewise. * python/python.c (execute_gdb_command, gdbpy_write, gdbpy_flush): Likewise. 2017-04-05 Pedro Alves * python/python-internal.h (gdb_PyGetSetDef): New type. * python/py-block.c (block_object_getset) (breakpoint_object_getset): Now a gdb_PyGetSetDef array. * python/py-event.c (event_object_getset) (finish_breakpoint_object_getset): Likewise. * python/py-inferior.c (inferior_object_getset): Likewise. * python/py-infthread.c (thread_object_getset): Likewise. * python/py-lazy-string.c (lazy_string_object_getset): Likewise. * python/py-linetable.c (linetable_entry_object_getset): Likewise. * python/py-objfile.c (objfile_getset): Likewise. * python/py-progspace.c (pspace_getset): Likewise. * python/py-record-btrace.c (btpy_insn_getset, btpy_call_getset): Likewise. * python/py-record.c (recpy_record_getset): Likewise. * python/py-symbol.c (symbol_object_getset): Likewise. * python/py-symtab.c (symtab_object_getset, sal_object_getset): Likewise. * python/py-type.c (type_object_getset, field_object_getset): Likewise. * python/py-value.c (value_object_getset): Likewise. 2017-04-05 Pedro Alves * python/python-internal.h (gdb_PyObject_CallMethod) (gdb_PyErr_NewException, gdb_PySys_GetObject, gdb_PySys_SetPath): New functions. (GDB_PYSYS_SETPATH_CHAR, PyObject_CallMethod, PyErr_NewException) (PySys_GetObject, PySys_SetPath): New macros. 2017-04-05 Pedro Alves * mi/mi-cmd-info.c (mi_cmd_info_os): Call info_osdata instead of info_osdata_command. * osdata.c (info_osdata_command): Rename to ... (info_osdata): ... this. Constify 'type' parameter, and remove the 'from_tty' parameter. Accept NULL TYPE. (info_osdata_command): New function. * osdata.h (info_osdata_command): Remove declaration. (info_osdata): New declaration. 2017-04-05 Pedro Alves * mi/mi-cmd-break.c (mi_cmd_break_insert_1, mi_cmd_break_insert) (mi_cmd_dprintf_insert, mi_cmd_break_passcount) (mi_cmd_break_watch, mi_cmd_break_commands): Constify 'command' parameter. * mi/mi-cmd-catch.c (mi_cmd_catch_assert, mi_cmd_catch_exception) (mi_cmd_catch_load, mi_cmd_catch_unload): Constify cmd' parameter. * mi/mi-cmd-disas.c (mi_cmd_disassemble): Constify 'command' parameter. * mi/mi-cmd-env.c (mi_cmd_env_pwd, mi_cmd_env_cd, mi_cmd_env_path) (mi_cmd_env_dir, mi_cmd_inferior_tty_set, _cmd_inferior_tty_show) * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file) (mi_cmd_file_list_exec_source_files) (mi_cmd_file_list_shared_libraries): Constify 'command' parameter. * mi/mi-cmd-info.c (mi_cmd_info_ada_exceptions) (mi_cmd_info_gdb_mi_command, mi_cmd_info_os): Constify 'command' parameter. * mi/mi-cmd-stack.c (mi_cmd_enable_frame_filters) (mi_cmd_stack_list_frames, mi_cmd_stack_info_depth) (mi_cmd_stack_list_locals, mi_cmd_stack_list_args) (mi_cmd_stack_list_variables, mi_cmd_stack_select_frame) (mi_cmd_stack_info_frame): Constify 'command' parameter. * mi/mi-cmd-target.c (mi_cmd_target_file_get) (mi_cmd_target_file_put, mi_cmd_target_file_delete): Constify 'command' parameter. * mi/mi-cmd-var.c (mi_cmd_var_create, mi_cmd_var_delete) (mi_cmd_var_set_format, mi_cmd_var_set_visualizer) (mi_cmd_var_set_frozen, mi_cmd_var_show_format) (mi_cmd_var_info_num_children, mi_cmd_var_list_children) (mi_cmd_var_info_type, mi_cmd_var_info_path_expression) (mi_cmd_var_info_expression, mi_cmd_var_show_attributes) (mi_cmd_var_evaluate_expression, mi_cmd_var_assign) (mi_cmd_var_update, mi_cmd_enable_pretty_printing) (mi_cmd_var_set_update_range): Constify 'command' parameter. * mi/mi-cmds.h (mi_cmd_argv_ftype): Constify 'command' parameter. * mi/mi-interp.c (mi_cmd_interpreter_exec): Constify 'command' parameter. * mi/mi-main.c (mi_cmd_gdb_exit, mi_cmd_exec_next) (mi_cmd_exec_next_instruction, mi_cmd_exec_step) (mi_cmd_exec_step_instruction, mi_cmd_exec_finish) (mi_cmd_exec_return ,mi_cmd_exec_jump, mi_cmd_exec_continue) (mi_cmd_exec_interrupt, mi_cmd_exec_run, mi_cmd_target_detach) (mi_cmd_target_flash_erase, mi_cmd_thread_select) (mi_cmd_thread_list_ids, mi_cmd_thread_info) (mi_cmd_list_thread_groups, mi_cmd_data_list_register_names) (mi_cmd_data_list_changed_registers) (mi_cmd_data_write_register_values) (mi_cmd_data_evaluate_expression, mi_cmd_data_read_memory) (mi_cmd_data_read_memory_bytes, mi_cmd_data_write_memory) (mi_cmd_data_write_memory_bytes, mi_cmd_enable_timings) (mi_cmd_list_features, mi_cmd_list_target_features) (mi_cmd_add_inferior, mi_cmd_remove_inferior) (mi_cmd_trace_define_variable, mi_cmd_trace_list_variables) (mi_cmd_trace_find, mi_cmd_trace_save, mi_cmd_trace_start) (mi_cmd_trace_status, mi_cmd_trace_stop, mi_cmd_ada_task_info) (mi_cmd_trace_frame_collected): Constify 'command' parameter. * mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Constify 'command' parameter. 2017-04-05 Pedro Alves * ada-lang.c (ada_completer_word_break_characters): Now a const array. (ada_get_gdb_completer_word_break_characters): Constify. * completer.c (gdb_completer_command_word_break_characters) (gdb_completer_file_name_break_characters) (gdb_completer_quote_characters): Now const arrays. (get_gdb_completer_quote_characters): Constify. (set_rl_completer_word_break_characters): New function. (set_gdb_completion_word_break_characters) (complete_line_internal): Use it. * completer.h (get_gdb_completer_quote_characters): Constify. (set_rl_completer_word_break_characters): Declare. * f-lang.c (f_word_break_characters): Constify. * language.c (default_word_break_characters): Constify. * language.h (language_defn::la_word_break_characters): Constify. (default_word_break_characters): Constify. * top.c (init_main): Use set_rl_completer_word_break_characters. 2017-04-05 Pedro Alves * aix-thread.c (aix_thread_pid_to_str) (aix_thread_extra_thread_info): Constify. * bsd-kvm.c (bsd_kvm_pid_to_str): Constify. * bsd-uthread.c (bsd_uthread_extra_thread_info) (bsd_uthread_pid_to_str): Constify. * corelow.c (core_pid_to_str): Constify. * darwin-nat.c (darwin_pid_to_str): Constify. * fbsd-nat.c (fbsd_pid_to_str): Constify. * fbsd-tdep.c (fbsd_core_pid_to_str, gdbarch_core_pid_to_str): Constify. * gnu-nat.c (gnu_pid_to_str): Constify. * go32-nat.c (go32_pid_to_str): Constify. * i386-cygwin-tdep.c (i386_windows_core_pid_to_str): Constify. * inf-ptrace.c (inf_ptrace_pid_to_str): Constify. * inferior.c (inferior_pid_to_str): Constify. * linux-nat.c (linux_nat_pid_to_str): Constify. * linux-tdep.c (linux_core_pid_to_str): Constify. * linux-thread-db.c (thread_db_pid_to_str) (thread_db_extra_thread_info): Constify. * nto-tdep.c (nto_extra_thread_info): Constify. * nto-tdep.h (nto_extra_thread_info): Constify. * obsd-nat.c (obsd_pid_to_str): Constify. * procfs.c (procfs_pid_to_str): Constify. * ravenscar-thread.c (ravenscar_extra_thread_info) (ravenscar_pid_to_str): Constify. * remote-sim.c (gdbsim_pid_to_str): Constify. * remote.c (remote_threads_extra_info, remote_pid_to_str): Constify. * sol-thread.c (solaris_pid_to_str): Constify. * sol2-tdep.c (sol2_core_pid_to_str): Constify. * sol2-tdep.h (sol2_core_pid_to_str): Constify. * target.c (default_pid_to_str, target_pid_to_str) (normal_pid_to_str, default_pid_to_str): Constify. * target.h (target_ops::to_pid_to_str) (target_ops::to_extra_thread_info): Constify. (target_pid_to_str, normal_pid_to_str): Constify. * windows-nat.c (windows_pid_to_str): Constify. * gdbarch.sh (core_pid_to_str): Constify. * target-delegates.c: Regenerate. * gdbarch.h, gdbarch.c: Regenerate. 2017-04-05 Pedro Alves * main.c (captured_main_1): Use gdb::unique_xmalloc_ptr to manage the memory of the temporary warning_pre_print override. * utils.c (warning_pre_print): Constify. * utils.h (warning_pre_print): Constify. 2017-04-05 Pedro Alves * cli/cli-cmds.c (shell_escape): Constify 'arg' parameter. (shell_command): New function. (make_command): Use std::string. (init_cli_cmds): Register shell_command instead of shell_escape. 2017-04-05 Pedro Alves * breakpoint.c (dprintf_function, dprintf_channel): Don't initialize. * tracepoint.c (default_collect): Don't initialize. 2017-04-05 Pedro Alves * macroexp.c (macro_buffer::shared): Now a bool. (init_buffer): Update. (init_shared_buffer): Constify 'addr' parameter. (substitute_args, expand, macro_expand, macro_expand_next): Remove casts. 2017-04-05 Pedro Alves * arm-tdep.c (show_disassembly_style_sfunc): Constify local. * disasm.c (set_disassembler_options): Constify local. * i386-tdep.c (i386_print_insn): Remove cast and FIXME comment. 2017-04-05 Sergio Durigan Junior PR gdb/21352 * tracefile.c (tsave_command): Fix argument parsing for '-r' option. 2017-04-05 Yao Qi * frame.c (frame_unwind_register_unsigned): Call frame_unwind_register_value. 2017-04-05 Yao Qi * gdb.threads/thread-specific-bp.exp (check_thread_specific_breakpoint): Use gdb_test_multiple, and don't match anchor. 2017-04-05 Pedro Alves * MAINTAINERS (Global Maintainers): Add Simon Marchi. (Write After Approval): Remove Simon Marchi. 2017-04-05 Pedro Alves * common/gdb_optional.h (optional::optional): Make constexpr and initialize m_dummy. 2017-04-04 John Baldwin * amd64-fbsd-tdep.c: Remove "bsd-uthread.h" include. (amd64fbsd_jmp_buf_reg_offset): Remove. (amd64fbsd_supply_uthread): Remove function. (amd64fbsd_collect_uthread): Remove function. (amd64fbsd_init_abi): Don't set bsd-uthread callbacks. * configure.tgt (i[34567]86-*-freebsd*): Remove bsd-uthread.o. (x86_64-*-freebsd*): Remove bsd-uthread.o. (fbsd-nat.c): Update comment. * i386-fbsd-tdep.c: Remove "bsd-uthread.h" include. (i386fbsd_jmp_buf_reg_offset): Remove. (i386fbsd_supply_uthread): Remove function. (i386fbsd_collect_uthread): Remove function. (i386fbsd_init_abi): Don't set bsd-uthread callbacks. 2017-04-04 John Baldwin * Makefile.in (ALL_64_TARGET_OBS): Remove alpha-fbsd-tdep.o. (ALLDEPFILES): Remove alpha-fbsd-tdep.c * NEWS: Mention that support for FreeBSD/alpha was removed. * alpha-fbsd-tdep.c: Delete file. * config/alpha/fbsd.mh: Delete file. * configure.host: Delete alpha*-*-freebsd* and alpha*-*-kfreebsd*-gnu. * configure.tgt: Delete alpha*-*-freebsd* and alpha*-*-kfreebsd*-gnu. 2017-04-04 John Baldwin * amd64-bsd-nat.c (amd64bsd_fetch_inferior_registers, amd64bsd_store_inferior_registers): Use ptid from regcache. 2017-04-04 Pedro Alves * dwarf2read.c (lnp_state_machine): Now a class. Initialize all data fields, make them private and add "m_" prefixes. (lnp_state_machine::lnp_state_machine): New ctor. (record_line, check_line_address, handle_set_discriminator) (handle_set_address, handle_advance_pc, handle_special_opcode) (handle_advance_line, handle_set_file, handle_negate_stmt) (handle_const_add_pc, handle_fixed_advance_pc, handle_copy) (end_sequence, advance_line): New methods. (m_gdbarch, m_record_lines_p): New fields. (lnp_reader_state): Delete. (dwarf_record_line): Rename to ... (lnp_state_machine::record_line): ... adjust. (init_lnp_state_machine): Delete. (lnp_state_machine::lnp_state_machine): New. (check_line_address): Rename to ... (lnp_state_machine::check_line_address): This. (dwarf_decode_lines_1): Remove reference to "reader_state". Adjust lnp_state_machine having a non-default ctor. Use bool. State machine internal state manipulation moved to lnp_state_machine methods. 2017-04-04 Pedro Alves * Makefile.in (SUBDIR_UNITTESTS_SRCS): Add unittests/offset-type-selftests.c. (SUBDIR_UNITTESTS_OBS): Add offset-type-selftests.o. * common/offset-type.h: New file. * common/preprocessor.h: New file. * common/traits.h: New file. * common/valid-expr.h: New file. * dwarf2expr.c: Include "common/underlying.h". Adjust to use sect_offset and cu_offset strong typedefs throughout. * dwarf2expr.h: Adjust to use sect_offset and cu_offset strong typedefs throughout. * dwarf2loc.c: Include "common/underlying.h". Adjust to use sect_offset and cu_offset strong typedefs throughout. * dwarf2read.c: Adjust to use sect_offset and cu_offset strong typedefs throughout. * gdbtypes.h: Include "common/offset-type.h". (cu_offset): Now an offset type (strong typedef) instead of a struct. (sect_offset): Likewise. (union call_site_parameter_u): Rename "param_offset" field to "param_cu_off". * unittests/offset-type-selftests.c: New file. 2017-04-04 Pedro Alves * common/underlying.h: New file. * dwarf2read.c: Include "common/gdb_optional.h" and "common/underlying.h". (dir_index, file_name_index): New types. (file_entry): Use them. (file_entry::include): Use to_underlying. (line_header::add_file_name): Use dir_index. (read_formatted_entries): Use gdb::optional. Read form before writting to file_entry. (dwarf_decode_line_header): Use dir_index. (lnp_state_machine::current_file): Use to_underlying. (lnp_state_machine::file): Change type to file_name_index. (dwarf_record_line): Use to_underlying. (init_lnp_state_machine): Use file_name_index. (dwarf_decode_lines_1): Use dir_index and file_name_index. 2017-04-04 Pedro Alves * common/gdb_optional.h (gdb::optiona): Add operator->, operator*, operator bool, has_value and get methods. 2017-04-04 Pedro Alves * dwarf2read.c (struct file_entry): Add ctors, and initialize all fields. (line_header): Initialize all data fields. Change type of standard_opcode_lengths to std::unique_ptr. Change type of include_dirs to std::vector. Remove num_include_dirs, include_dirs_size. Change type of file_names to std::vector. Remove num_file_names, file_names_size. (line_header::line_header): New. (line_header::add_include_dir, line_header::add_file_name): New methods. (line_header::include_dir_at): Remove NULL check. (line_header::file_name_at): Add const overload. (line_header_up): New unique_ptr typedef. (dw2_get_file_names_reader): Use line_header_up. Adjust to use std::vector. Remove free_line_header call. (dwarf2_build_include_psymtabs): Use line_header_up. Remove free_line_header call. (free_cu_line_header): Delete. (handle_DW_AT_stmt_list, handle_DW_AT_stmt_list) (setup_type_unit_groups): Use line_header_up instead of cleanups. Adjust to use std::vector. (free_line_header): Delete. (free_line_header_voidp): Use delete. (add_include_dir): Replace with ... (line_header::add_include_dir): ... this method. Use std::vector. (add_file_name): Replace with ... (line_header::add_file_name): ... this method. Use std::vector. (add_include_dir_stub): Delete. (read_formatted_entries): Remove memset. (dwarf_decode_line_header): Return a line_header_up instead of a raw pointer. Remove cleanup handling. Pass lambdas to read_formatted_entries. Adjust to use line_header methods. (dwarf_decode_lines_1): Adjust to use line_header methods. (dwarf_decode_lines, file_file_name, file_full_name): Adjust to use std::vector. 2017-04-04 Simon Marchi * remote.c (set_general_thread, set_continue_thread): Use ptid_t instead of struct ptid. 2017-05-04 Alan Hayward * frame.c (get_frame_register_bytes): Unwind using value. (put_frame_register_bytes): Likewise. 2017-03-30 Iain Buclaw * d-exp.y (type_aggregate_p): Treat TYPE_CODE_MODULE as being aggregate-like. 2017-03-29 Jan Kratochvil * auto-load.c (auto_load_section_scripts): Check SEC_HAS_CONTENTS. 2017-03-29 Yao Qi * gdbthread.h (struct thread_info): Declare constructor and destructor. Add some in-class member initializers. * thread.c (free_thread): Remove. (init_thread_list): Call delete instead of free_thread. (new_thread): Call thread_info constructor. (thread_info::thread_info): New function. (thread_info::~thread_info): New function. (delete_thread_1): Call delete instead of free_thread. (make_cleanup_restore_current_thread): Move tp and frame to inner block. 2017-03-28 Anton Kolesov * arc-tdep.c (arc_frame_cache): Add support for prologue analysis. (arc_skip_prologue): Likewise. (arc_make_frame_cache): Likewise. (arc_pv_get_operand): New function. (arc_is_in_prologue): Likewise. (arc_analyze_prologue): Likewise. (arc_print_frame_cache): Likewise. (MAX_PROLOGUE_LENGTH): New constant. 2017-03-28 Anton Kolesov * configure.tgt: Add arc-insn.o. * arc-tdep.c (arc_delayed_print_insn): Make non-static. (dump_arc_instruction_command): New function. (arc_fprintf_disasm): Likewise. (arc_disassemble_info): Likewise. (arc_insn_get_operand_value): Likewise. (arc_insn_get_operand_value_signed): Likewise. (arc_insn_get_memory_base_reg): Likewise. (arc_insn_get_memory_offset): Likewise. (arc_insn_get_branch_target): Likewise. (arc_insn_dump): Likewise. (arc_insn_get_linear_next_pc): Likewise. * arc-tdep.h (arc_delayed_print_insn): Add function declaration. (arc_disassemble_info): Likewise. (arc_insn_get_branch_target): Likewise. (arc_insn_get_linear_next_pc): Likewise. * NEWS: Mention new "maint print arc arc-instruction". 2017-03-28 Anton Kolesov * arc-tdep (maintenance_print_arc_list): New variable. (maintenance_print_arc_command): New function. 2017-03-28 Anton Kolesov * arc-tdep.c (core_v2_register_names, core_arcompact_register_names) Add "limm" and "reserved". (arc_cannot_fetch_register, arc_cannot_store_register): Add ARC_RESERVED_REGNUM and ARC_LIMM_REGNUM. * arc-tdep.h (arc_regnum): Likewise. 2017-03-27 Max Filippov * xtensa-linux-nat.c (fill_gregset): Call regcache_raw_collect for THREADPTR register. (supply_gregset_reg): Call regcache_raw_supply for THREADPTR register. * xtensa-tdep.c (XTENSA_DBREGN_UREG): New definition. (xtensa_derive_tdep): Initialize tdep->threadptr_regnum. * xtensa-tdep.h (gdbarch_tdep::threadptr_regnum): New field. 2017-03-27 Max Filippov * xtensa-tdep.c (xtensa_pseudo_register_read): Treat all registers above gdbarch_num_regs (gdbarch) as privileged in call0 ABI. 2017-03-27 Max Filippov * xtensa-linux-nat.c (fill_gregset): Call regcache_raw_collect for a single specified register or for all registers in a0_base..a0_base + C0_NREGS range. (supply_gregset_reg): Call regcache_raw_supply for a single specified register or for all registers in a0_base..a0_base + C0_NREGS range. 2017-03-27 Max Filippov * arch/xtensa.h (C0_NREGS): Add definition. * xtensa-tdep.c (C0_NREGS): Remove definition. 2017-03-27 Max Filippov * xtensa-tdep.c (xtensa_scan_prologue, call0_analyze_prologue): Drop xtensa_default_isa initialization. (xtensa_gdbarch_init): Initialize xtensa_default_isa. 2017-03-27 Pedro Alves * dwarf2read.c (file_entry) : Add comment. (file_entry::include_dir): New method. (line_header::include_dir_at, line_header::file_name_at): New methods. (setup_type_unit_groups, setup_type_unit_groups) (psymtab_include_file_name): Simplify using the new methods. (lnp_state_machine) : New field. : Add comment. (lnp_state_machine::current_file): New method. (dwarf_record_line): Simplify using the new methods. (init_lnp_state_machine): Initialize the "the_line_header" field. (dwarf_decode_lines_1, dwarf_decode_lines, file_file_name): Simplify using the new methods. 2017-03-27 Pedro Alves * cp-name-parser.y (make_empty): Delete. (demangler_special, nested_name, ptr_operator, array_indicator) (direct_declarator, declarator_1): Use fill_comp instead of make_empty. 2017-03-27 Pedro Alves * xml-support.h (gdb_xml_debug): Pass a "first-to-check" argument to ATTRIBUTE_PRINTF. * solib-target.c (library_list_start_list): Print "string" not "version". * xml-tdesc.c (tdesc_start_field): Pass "field_name" to gdb_xml_error call. 2017-03-27 Pedro Alves * dwarf2read.c (struct file_and_directory): New. (dwarf2_get_dwz_file): Adjust to use std::string. (dw2_get_file_names_reader): Adjust to use file_and_directory. (find_file_and_directory): Adjust to return a file_and_directory object. (read_file_scope): Adjust to use file_and_directory. Remove make_cleanup/do_cleanups calls. (open_and_init_dwp_file): Adjust to use std::string. Remove make_cleanup/do_cleanups calls. * python/python.c (do_start_initialization): Adjust to ldirname returning a std::string. * utils.c (ldirname): Now returns a std::string. * utils.h (ldirname): Change return type to std::string. * xml-syscall.c (xml_init_syscalls_info): Adjust to ldirname returning a std::string. * xml-tdesc.c (file_read_description_xml): Likewise. 2017-03-24 Alan Hayward * regcache.c (regcache_debug_print_register): New function. * regcache.h (regcache_debug_print_register): New declaration. * target.c (debug_print_register): Remove. (target_fetch_registers): Call regcache_debug_print_register. (target_store_registers): Likewise. 2017-03-24 Pádraig Brady * dwarf2read.c (setup_type_unit_groups): Ensure dir_index doesn't reference beyond the 'lh->include_dirs' array before accessing to it. (psymtab_include_file_name): Likewise. (dwarf_decode_lines_1): Likewise. (dwarf_decode_lines): Likewise. (file_file_name): Likewise. 2017-03-23 Simon Marchi * fbsd-tdep.c (fbsd_corefile_thread): Don't set/restore inferior_ptid. * proc-service.c (ps_lgetregs, ps_lsetregs, ps_lgetfpregs, ps_lsetfpregs): Likewise. * regcache.c (regcache_raw_update, regcache_raw_write): Likewise. * sol-thread.c (ps_lgetregs, ps_lsetregs, ps_lgetfpregs, ps_lsetfpregs): Likewise. * target.c (target_fetch_registers, target_store_registers): Remove asserts. 2017-03-23 Alan Hayward * sol-thread.c (sol_thread_store_registers): Remove regcache calls. 2017-03-23 Yao Qi * aarch64-tdep.c (aarch64_process_record_test): Declare. (_initialize_aarch64_tdep): Register it. (aarch64_record_load_store): Handle PRFM instruction. (aarch64_process_record_test): New function. 2017-03-23 Yao Qi * aarch64-tdep.c (aarch64_record_load_store): Fix code indentation. 2017-03-23 Yao Qi * aarch64-tdep.c: Remove AARCH64_RECORD_FAILURE. 2017-03-23 Philipp Rudo python/python.c (do_start_initialization): Fix memory leak. 2017-03-22 Simon Marchi * inf-ptrace.c (inf_ptrace_xfer_partial): Get pid from ptid using get_ptrace_pid. * linux-nat.c (linux_nat_xfer_partial): Don't set/restore inferior_ptid. (linux_proc_xfer_partial, linux_proc_xfer_spu): Use lwp of inferior_ptid instead of pid. 2017-03-22 Yao Qi * aarch64-tdep.c: Wrap locally used classes in anonymous namespace. * arm-tdep.c: Likewise. * linespec.c: Likewise. * ui-out.c: Likewise. 2017-03-22 Jonah Graham PR gdb/19637 * python/lib/gdb/printer/bound_registers.py: Import sys. 2017-03-21 Simon Marchi * windows-nat.c (do_windows_fetch_inferior_registers): Add windows_thread_info parameter and use it instead of current_thread. (windows_fetch_inferior_registers): Don't set current_thread, pass the thread to do_windows_fetch_inferior_registers. Use ptid from regcache instead of inferior_ptid. (do_windows_store_inferior_registers): Add windows_thread_info parameter and use it instead of current_thread. (windows_store_inferior_registers): Don't set current_thread, pass the thread to do_windows_store_inferior_registers. Use ptid from regcache instead of inferior_ptid. 2017-03-21 Simon Marchi * ser-mingw.c (ser_windows_raw): Remove reference to struct serial::current_timeout. 2017-03-21 Ivo Raisr PR tdep/20928 * gdb/sparc-tdep.h (gdbarch_tdep) : New field. * gdb/sparc64-tdep.c (sparc64_ccr_type): New function. (sparc64_fsr_type): Fix %fsr decoding. 2017-03-21 Tim Wiederhake * python/py-record-btrace.c (btpy_insn_data): Change return type for Python 2. 2017-03-20 Simon Marchi * spu-linux-nat.c (spu_fetch_inferior_registers, spu_store_inferior_registers): Use ptid from regcache, set and restore inferior_ptid. * spu-multiarch.c (spu_fetch_registers, spu_store_registers): Likewise. 2017-03-20 Simon Marchi * i386-linux-nat.c (fetch_register, store_register, i386_linux_fetch_inferior_registers, i386_linux_store_inferior_registers): Use ptid from regcache. * ia64-linux-nat.c (ia64_linux_fetch_register, ia64_linux_store_register): Likewise. * inf-ptrace.c (inf_ptrace_fetch_register, inf_ptrace_store_register): Likewise. * m32r-linux-nat.c (m32r_linux_fetch_inferior_registers, m32r_linux_store_inferior_registers): Likewise. * m68k-bsd-nat.c (m68kbsd_fetch_inferior_registers, m68kbsd_store_inferior_registers): Likewise. * m68k-linux-nat.c (fetch_register, store_register, m68k_linux_fetch_inferior_registers, m68k_linux_store_inferior_registers): Likewise. * m88k-bsd-nat.c (m88kbsd_fetch_inferior_registers, m88kbsd_store_inferior_registers): Likewise. * mips-fbsd-nat.c (mips_fbsd_fetch_inferior_registers, mips_fbsd_store_inferior_registers): Likewise. * mips-linux-nat.c (mips64_linux_regsets_fetch_registers, mips64_linux_regsets_store_registers): Likewise. * mips-nbsd-nat.c (mipsnbsd_fetch_inferior_registers, mipsnbsd_store_inferior_registers): Likewise. * mips-obsd-nat.c (mips64obsd_fetch_inferior_registers, mips64obsd_store_inferior_registers): Likewise. * nto-procfs.c (procfs_fetch_registers, procfs_store_registers): Likewise. * ppc-fbsd-nat.c (ppcfbsd_fetch_inferior_registers, ppcfbsd_store_inferior_registers): Likewise. * ppc-linux-nat.c (ppc_linux_fetch_inferior_registers, ppc_linux_store_inferior_registers): Likewise. * ppc-nbsd-nat.c (ppcnbsd_fetch_inferior_registers, ppcnbsd_store_inferior_registers): Likewise. * ppc-obsd-nat.c (ppcobsd_fetch_registers, ppcobsd_store_registers): Likewise. * procfs.c (procfs_fetch_registers, procfs_store_registers): Likewise. * ravenscar-thread.c (ravenscar_fetch_registers, ravenscar_store_registers, ravenscar_prepare_to_store): Likewise. * record-btrace.c (record_btrace_fetch_registers, record_btrace_store_registers, record_btrace_prepare_to_store): Likewise. * remote-sim.c (gdbsim_fetch_register, gdbsim_store_register): Lookup inferior using ptid from regcache, instead of current_inferior. * remote.c (remote_fetch_registers, remote_store_registers): Use ptid from regcache. * rs6000-nat.c (fetch_register, store_register): Likewise. * s390-linux-nat.c (s390_linux_fetch_inferior_registers, s390_linux_store_inferior_registers): Likewise. * sh-nbsd-nat.c (shnbsd_fetch_inferior_registers, shnbsd_store_inferior_registers): Likewise. * sol-thread.c (sol_thread_fetch_registers, sol_thread_store_registers): Likewise. * sparc-nat.c (sparc_fetch_inferior_registers, sparc_store_inferior_registers): Likewise. * tilegx-linux-nat.c (fetch_inferior_registers, store_inferior_registers): Likewise. * vax-bsd-nat.c (vaxbsd_fetch_inferior_registers, vaxbsd_store_inferior_registers): Likewise. * xtensa-linux-nat.c (fetch_gregs, store_gregs, fetch_xtregs, store_xtregs): Likewise. 2017-03-20 Artemiy Volkov PR gdb/14441 * NEWS: Mention support for rvalue references in GDB and python. * doc/gdb.texinfo (C Plus Plus Expressions): Mention that GDB supports both lvalue and rvalue references. 2017-03-20 Artemiy Volkov PR gdb/14441 * gdbtypes.c (rank_one_type): Implement overloading resolution rules regarding rvalue references. 2017-03-20 Artemiy Volkov PR gdb/14441 * aarch64-tdep.c (aarch64_type_align) (aarch64_extract_return_value, aarch64_store_return_value): Change lvalue reference type checks to general reference type checks. * amd64-tdep.c (amd64_classify): Likewise. * amd64-windows-tdep.c (amd64_windows_passed_by_integer_register): Likewise. * arm-tdep.c (arm_type_align, arm_extract_return_value) (arm_store_return_value): Likewise. * ax-gdb.c (gen_fetch, gen_cast): Likewise. * c-typeprint.c (c_print_type): Likewise. * c-varobj.c (adjust_value_for_child_access, c_value_of_variable) (cplus_number_of_children, cplus_describe_child): Likewise. * compile/compile-c-symbols.c (generate_vla_size): Likewise. * completer.c (expression_completer): Likewise. * cp-support.c (make_symbol_overload_list_adl_namespace): Likewise. * darwin-nat-info.c (info_mach_region_command): Likewise. * dwarf2loc.c (entry_data_value_coerce_ref) (value_of_dwarf_reg_entry): Likewise. * eval.c (ptrmath_type_p, evaluate_subexp_standard) (evaluate_subexp_for_address, evaluate_subexp_for_sizeof): Likewise. * findvar.c (extract_typed_address, store_typed_address): Likewise. * gdbtypes.c (rank_one_type): Likewise. * hppa-tdep.c (hppa64_integral_or_pointer_p): Likewise. * infcall.c (value_arg_coerce): Likewise. * language.c (pointer_type): Likewise. * m32c-tdep.c (m32c_reg_arg_type, m32c_m16c_address_to_pointer): Likewise. * m88k-tdep.c (m88k_integral_or_pointer_p): Likewise. * mn10300-tdep.c (mn10300_type_align): Likewise. * msp430-tdep.c (msp430_push_dummy_call): Likewise. * ppc-sysv-tdep.c (do_ppc_sysv_return_value) (ppc64_sysv_abi_push_param, ppc64_sysv_abi_return_value): Likewise. * printcmd.c (print_formatted, x_command): Likewise. * python/py-type.c (typy_get_composite, typy_template_argument): Likewise. * python/py-value.c (valpy_referenced_value) (valpy_get_dynamic_type, value_has_field): Likewise. * s390-linux-tdep.c (s390_function_arg_integer): Likewise. * sparc-tdep.c (sparc_integral_or_pointer_p): Likewise. * sparc64-tdep.c (sparc64_integral_or_pointer_p): Likewise. * spu-tdep.c (spu_scalar_value_p): Likewise. * symtab.c (lookup_symbol_aux): Likewise. * typeprint.c (whatis_exp, print_type_scalar): Likewise. * valarith.c (binop_types_user_defined_p, unop_user_defined_p): Likewise. * valops.c (value_cast_pointers, value_cast) (value_reinterpret_cast, value_dynamic_cast, value_addr, typecmp) (value_struct_elt, value_struct_elt_bitpos) (value_find_oload_method_list, find_overload_match) (value_rtti_indirect_type): Likewise. * valprint.c (val_print_scalar_type_p, generic_val_print): Likewise. * value.c (value_actual_type, value_as_address, unpack_long) (pack_long, pack_unsigned_long, coerce_ref_if_computed) (coerce_ref): Likewise. * varobj.c (varobj_get_value_type): Likewise. 2017-03-20 Artemiy Volkov PR gdb/14441 * doc/python.texi (Types in Python): Add TYPE_CODE_RVALUE_REF to table of constants. * python/lib/gdb/command/explore.py: Support exploring values of rvalue reference types. * python/lib/gdb/types.py: Implement get_basic_type() for rvalue reference types. * python/py-type.c (pyty_codes) : New constant. * python/py-value.c (valpy_getitem): Add an rvalue reference check. (valpy_reference_value): Add new parameter "refcode". (valpy_lvalue_reference_value, valpy_rvalue_reference_value): New wrappers for valpy_reference_value(). * python/py-xmethods.c (gdbpy_get_xmethod_result_type) (gdbpy_invoke_xmethod): Likewise. 2017-03-20 Artemiy Volkov PR gdb/14441 * dwarf2read.c (process_die, read_type_die_1): Handle the DW_TAG_rvalue_reference_type DIE. (read_tag_reference_type): Add new parameter "refcode". 2017-03-20 Artemiy Volkov PR gdb/14441 * c-typeprint.c (c_print_type, c_type_print_varspec_prefix) (c_type_print_modifier, c_type_print_varspec_suffix) (c_type_print_base): Support printing rvalue reference types. * c-valprint.c (c_val_print, c_value_print): Support printing rvalue reference values. 2017-03-20 Artemiy Volkov PR gdb/14441 * cp-name-parser.y (ptr_operator): Handle the '&&' token in typename. * cp-support.c (replace_typedefs): Handle DEMANGLE_COMPONENT_RVALUE_REFERENCE. * python/py-type.c (typy_lookup_type): Likewise. 2017-03-20 Artemiy Volkov PR gdb/14441 * c-exp.y (ptr_operator): Handle the '&&' token in the typename. * parse.c (insert_type): Change assert statement. (follow_types): Handle rvalue reference types. * parser-defs.h (enum type_pieces) : New constant. 2017-03-20 Artemiy Volkov PR gdb/14441 * ada-lang.c (ada_evaluate_subexp): Adhere to the new value_ref() interface. * c-valprint.c (c_value_print): Likewise. * infcall.c (value_arg_coerce): Likewise. * python/py-value.c (valpy_reference_value): Likewise. * valops.c (value_cast, value_reinterpret_cast) (value_dynamic_cast, typecmp): Likewise. (value_ref): Parameterize by kind of return value reference type. * value.h (value_ref): Add new parameter "refcode". 2017-03-20 Artemiy Volkov PR gdb/14441 * dwarf2read.c (read_tag_reference_type): Use lookup_lvalue_reference_type() instead of lookup_reference_type(). * eval.c (evaluate_subexp_standard): Likewise. * f-exp.y: Likewise. * gdbtypes.c (make_reference_type, lookup_reference_type): Generalize with rvalue reference types. (lookup_lvalue_reference_type, lookup_rvalue_reference_type): New convenience wrappers for lookup_reference_type(). * gdbtypes.h (make_reference_type, lookup_reference_type): Add a reference kind parameter. (lookup_lvalue_reference_type, lookup_rvalue_reference_type): Add wrappers for lookup_reference_type(). * guile/scm-type.c (gdbscm_type_reference): Use lookup_lvalue_reference_type() instead of lookup_reference_type(). * guile/scm-value.c (gdbscm_value_dynamic_type): Likewise. * parse.c (follow_types): Likewise. * python/py-type.c (typy_reference, typy_lookup_type): Likewise. * python/py-value.c (valpy_get_dynamic_type, valpy_getitem): Likewise. * python/py-xmethods.c (gdbpy_get_xmethod_result_type) (gdbpy_invoke_xmethod): Likewise. * stabsread.c: Provide extra argument to make_reference_type() call. * valops.c (value_ref, value_rtti_indirect_type): Use lookup_lvalue_reference_type() instead of lookup_reference_type(). 2017-03-20 Artemiy Volkov PR gdb/14441 * gdbtypes.h (enum type_code) : New constant. (TYPE_IS_REFERENCE): New macro. (struct type): Add rvalue_reference_type field. (TYPE_RVALUE_REFERENCE_TYPE): New macro. 2017-03-20 Marc-Andre Laperle * NEWS: Add an entry about new '-file-list-shared-libraries' command. * mi/mi-cmd-file.c (mi_cmd_file_list_shared_libraries): New function definition. * mi/mi-cmds.c (mi_cmds): Add -file-list-shared-libraries command. * mi/mi-cmds.h (mi_cmd_file_list_shared_libraries): New function declaration. * mi/mi-interp.c (mi_output_solib_attribs): New Function. * mi/mi-interp.h: New file. * solib.c (info_sharedlibrary_command): Replace for loop with ALL_SO_LIBS macro * solib.h (update_solib_list): New function declaration. (so_list_head): Move macro. * solist.h (ALL_SO_LIBS): New macro. 2017-03-20 Marc-Andre Laperle * infcmd.c (post_create_inferior): Remove unused argument in call to solib_add. * remote.c (remote_start_remote): Likewise. * solib-frv.c (frv_fetch_objfile_link_map): Likewise. * solib-svr4.c: (svr4_fetch_objfile_link_map): Likewise. (enable_break): Likewise. * solib.c (update_solib_list): Remove unused target argument and its documentation. (solib_add): Remove unused target argument. Remove unused argument in call to update_solib_list. (info_sharedlibrary_command): Remove unused argument in call to update_solib_list. (sharedlibrary_command): Remove unused argument in call to solib_add. (handle_solib_event): Likewise. (reload_shared_libraries): Likewise. * solib.h (solib_add): Remove unused target argument. 2017-03-20 Andreas Arnez * s390-linux-tdep.c (is_rsi, is_rie): Remove functions. (s390_displaced_step_fixup): Cover relative branches with the default fixup handling. This fixes lack of support for some relative branch instructions. 2017-03-17 Simon Marchi * i386-gnu-nat.c (gnu_fetch_registers, gnu_store_registers): Use ptid from regcache. 2017-03-17 Simon Marchi * i386-darwin-nat.c (i386_darwin_fetch_inferior_registers, i386_darwin_store_inferior_registers): Use ptid from regcache. 2017-03-17 Simon Marchi * i386-bsd-nat.c (i386bsd_fetch_inferior_registers, i386bsd_store_inferior_registers): Use ptid from regcache. 2017-03-17 Simon Marchi * hppa-obsd-nat.c (hppaobsd_fetch_registers, hppaobsd_store_registers): Use ptid from regcache. 2017-03-17 Simon Marchi * hppa-nbsd-nat.c (hppanbsd_fetch_registers, hppanbsd_store_registers): Use ptid from regcache. 2017-03-17 Simon Marchi * hppa-linux-nat.c (fetch_register, store_register): Use ptid from regcache. Use get_ptrace_pid. 2017-03-17 Simon Marchi * corelow.c (get_core_register_section): Use ptid from regcache, update doc. 2017-03-17 Simon Marchi * bsd-uthread.c (bsd_uthread_fetch_registers, bsd_uthread_store_registers): Use ptid from regcache, set and restore inferior_ptid. 2017-03-17 Simon Marchi * arm-nbsd-nat.c (fetch_register, fetch_regs, fetch_fp_register, fetch_fp_regs, store_register, store_regs, store_fp_register, store_fp_regs): Use ptid from regcache. 2017-03-17 Simon Marchi * arm-linux-nat.c (fetch_fpregs, store_fpregs, fetch_regs, store_regs, fetch_wmmx_regs, store_wmmx_regs, fetch_vfp_regs, store_vfp_regs): Use ptid from regcache. 2017-03-17 Pedro Alves PR remote/21188 * ser-base.c (ser_base_wait_for): Add comment. (do_ser_base_readchar): Improve comment based on the ser-unix.c's version. * ser-unix.c (hardwire_raw): Remove reference to scb->current_timeout. (wait_for, do_hardwire_readchar, hardwire_readchar): Delete. (hardwire_ops): Install ser_base_readchar instead of hardwire_readchar. * serial.h (struct serial) : Remove fields. 2017-03-17 Jonah Graham PR gdb/19637 * python/lib/gdb/printer/bound_registers.py: Add support for Python 3. 2017-03-16 Andreas Arnez * dwarf2loc.c (indirect_synthetic_pointer): Get data type of pointed-to DIE and pass it to dwarf2_evaluate_loc_desc_full. (dwarf2_evaluate_loc_desc_full): New parameter subobj_type; rename byte_offset to subobj_byte_offset. Fix the handling of DWARF_VALUE_STACK on big-endian targets when coming via an implicit pointer. (dwarf2_evaluate_loc_desc): Adjust call to dwarf2_evaluate_loc_desc_full. * dwarf2loc.h (dwarf2_fetch_die_type_sect_off): New declaration. * dwarf2read.c (dwarf2_fetch_die_type_sect_off): New function. 2017-03-16 Yao Qi * arm-tdep.c (thumb_record_misc): Decode CBNZ, CBZ, REV16, and REVSH instructions. 2017-03-16 Yao Qi * arm-tdep.c [GDB_SELF_TEST]: include "selftests.h". (arm_record_test): Declare. (_initialize_arm_tdep) [GDB_SELF_TEST]: call register_self_test. (thumb_record_ld_st_reg_offset): Rewrite the opcode matching to align with the manual. (thumb_record_misc): Adjust the code order to align with the manual. (thumb2_record_decode_insn_handler): Fix instruction matching. (instruction_reader_thumb): New class. (arm_record_test): New function. 2017-03-16 Yao Qi * arm-tdep.c (abstract_memory_reader): New class. (instruction_reader): New class. (extract_arm_insn): Add argument 'reader'. Callers updated. (decode_insn): Likewise. 2017-03-16 Doug Evans * guile/scm-lazy-string.c (lazy_string_smob): Clarify use of LENGTH member. Change type of TYPE member to SCM. All uses updated. (lsscm_make_lazy_string_smob): Add assert. (lsscm_make_lazy_string): Flag bad length values. (lsscm_elt_type): New function. (gdbscm_lazy_string_to_value): Rewrite to use lsscm_safe_lazy_string_to_value. (lsscm_safe_lazy_string_to_value): Fix handling of TYPE_CODE_PTR. * guile/scm-value.c (gdbscm_value_to_lazy_string): Flag bad length values. Fix TYPE_CODE_PTR. Handle TYPE_CODE_ARRAY. Handle typedefs in incoming type. * guile/guile-internal.h (tyscm_scm_to_type): Declare. * guile/scm-type.c (tyscm_scm_to_type): New function. 2017-03-15 Doug Evans PR python/17728, python/18439, python/18779 * python/py-lazy-string.c (lazy_string_object): Clarify use of LENGTH member. Change type of TYPE member to PyObject *. All uses updated. (stpy_convert_to_value): Fix handling of TYPE_CODE_PTR. (gdbpy_create_lazy_string_object): Flag bad length values. Handle TYPE_CODE_ARRAY with possibly different user-provided length. Handle typedefs in incoming type. (stpy_lazy_string_elt_type): New function. (gdbpy_extract_lazy_string): Call it. * python/py-value.c (valpy_lazy_string): Flag bad length values. Fix handling of TYPE_CODE_PTR. Handle TYPE_CODE_ARRAY. Handle typedefs in incoming type. 2017-03-16 Doug Evans * guile/guile-internal.h (tyscm_scm_to_type): Declare. * guile/scm-type.c (tyscm_scm_to_type): New function. 2017-03-16 Jiong Wang * inf-ptrace.c (inf_ptrace_peek_poke): Change the type to "ULONGEST" for "skip". 2017-03-14 Andreas Arnez PR gdb/21220 * inf-ptrace.c (inf_ptrace_xfer_partial): In "case TARGET_OBJECT_MEMORY", extract the logic for ptrace peek/poke... (inf_ptrace_peek_poke): ...here. New function. Now also loop over ptrace peek/poke until end of buffer or error. 2017-03-14 Simon Marchi * parse.c (length_of_subexp): Make static. * parser-defs.h (length_of_subexp): Remove. 2017-03-14 Andreas Arnez * linux-nat.c (linux_proc_xfer_partial): Handle write operations as well. 2017-03-14 Pedro Alves * cp-name-parser.y (cp_demangled_name_to_comp): Update comment. (main): Use std::unique_ptr. Remove calls to cp_demangled_name_parse_free. 2017-03-13 Simon Marchi * alpha-bsd-nat.c (alphabsd_fetch_inferior_registers, alphabsd_store_inferior_registers): Use regcache->ptid instead of inferior_ptid. 2017-03-13 Simon Marchi * aix-thread.c (aix_thread_fetch_registers, aix_thread_store_registers): Use regcache->ptid instead of inferior_ptid. 2017-03-13 Simon Marchi * aarch64-linux-nat.c (fetch_gregs_from_thread, store_gregs_to_thread, fetch_fpregs_from_thread, store_fpregs_to_thread): Use regcache->ptid instead of inferior_ptid. 2017-03-13 Simon Marchi * amd64-linux-nat.c (amd64_linux_fetch_inferior_registers, amd64_linux_fetch_inferior_registers): Use regcache->ptid instead of inferior_ptid. 2017-03-13 Simon Marchi * target.c (target_fetch_registers, target_store_registers): Add assert. 2017-03-13 Simon Marchi * regcache.h (regcache_get_ptid): New function. * regcache.c (regcache_get_ptid): New function. 2017-03-13 Mark Wielaard * cp-name-parser.y (make_empty): Initialize d_printing to zero. 2017-03-10 Keith Seitz PR c++/8218 * c-typeprint.c (cp_type_print_method_args): Skip artificial arguments. 2017-03-08 Pedro Alves PR gdb/18360 * infrun.c (start_step_over, do_target_resume, resume) (restart_threads): Assert we're not resuming a thread that is meant to be stopped. (infrun_thread_stop_requested_callback): Delete. (infrun_thread_stop_requested): If the thread is internally stopped, queue a pending stop event and clear the thread's inline-frame state. (handle_stop_requested): New function. (handle_syscall_event, handle_inferior_event_1): Use handle_stop_requested. (handle_stop_requested): New function. (handle_signal_stop): Set the thread's stop_signal here instead of at caller. (finish_step_over): Clear step over info unconditionally. (handle_signal_stop): If the user had interrupted the event thread, consider the stop a random signal. (handle_signal_stop) : Don't restart threads here. (stop_waiting): Don't clear step-over info here. 2017-03-08 Pedro Alves PR 21206 * common/gdb_unlinker.h (unlinker::unlinker): Attribute nonnull goes to argument 2, not 1. 2017-03-08 Pedro Alves PR cli/21218 * top.c (gdb_readline_wrapper): Avoid passing NULL to display_gdb_prompt. (command_line_input): Add comment. 2017-03-08 Pedro Alves PR tui/21216 * tui/tui-file.c (tui_file::write): New. * tui/tui-file.h (tui_file): Override "write". * tui/tui-io.c (do_tui_putc, update_start_line): New functions, factored out from ... (tui_puts): ... here. (tui_putc): Use them. (tui_write): New function. * tui/tui-io.h (tui_write): Declare. 2017-03-07 Sergio Durigan Junior * Makefile.in (SFILES): Replace "environ.c" with "common/environ.c". (HFILES_NO_SRCDIR): Likewise, for "environ.h". * environ.c: Include "common-defs.h" instead of "defs.h. Moved to... * common/environ.c: ... here. * environ.h: Moved to... * common/environ.h: ... here. 2017-03-07 Peter Bergner * gdbarch.sh (pstring_ptr): New static function. (gdbarch_disassembler_options): Use it. (gdbarch_verify_disassembler_options): Print valid_disassembler_options, not valid_disassembler_option->name. * gdbarch.c: Regenerate. 2017-03-07 Peter Bergner * config/powerpc/ppc64-linux.mh (MH_CFLAGS): Delete. 2017-03-07 Pedro Alves * tui/tui-regs.c (tui_restore_gdbout): Don't delete gdb_stdout. 2017-03-07 Walfred Tedeschi * i387-tdep.h (i387_reset_bnd_regs): Add function definition. * i387-tdep.c (i387_reset_bnd_regs): Add function implementation. * i386-tdep.c (i386_push_dummy_call): Call i387_reset_bnd_regs. * amd64-tdep.c (amd64_push_dummy_call): Call i387_reset_bnd_regs. 2017-03-06 Simon Marchi * xtensa-linux-nat.c (fetch_gregs): Remove const. 2017-03-03 Simon Marchi * remote.c (remote_add_target_side_commands): Use range-based for loop. 2017-03-03 Yao Qi PR gdb/21165 * ada-valprint.c (ada_val_print_ref): Call value_fetch_lazy if value is lazy. * valprint.c (common_val_print): Likewise. 2017-02-28 Peter Bergner * NEWS: Mention new set/show disassembler-options commands. * doc/gdb.texinfo: Document new set/show disassembler-options commands. * disasm.c: Include "arch-utils.h", "gdbcmd.h" and "safe-ctype.h". (prospective_options): New static variable. (gdb_disassembler::gdb_disassembler): Initialize m_di.disassembler_options. (gdb_buffered_insn_length_init_dis): Initilize di->disassembler_options. (get_disassembler_options): New function. (set_disassembler_options): Likewise. (set_disassembler_options_sfunc): Likewise. (show_disassembler_options_sfunc): Likewise. (disassembler_options_completer): Likewise. (_initialize_disasm): Likewise. * disasm.h (get_disassembler_options): New prototype. (set_disassembler_options): Likewise. * gdbarch.sh (gdbarch_disassembler_options): New variable. (gdbarch_verify_disassembler_options): Likewise. * gdbarch.c: Regenerate. * gdbarch.h: Likewise. * arm-tdep.c (num_disassembly_options): Delete. (set_disassembly_style): Likewise. (arm_disassembler_options): New static variable. (set_disassembly_style_sfunc): Convert short style name into long option name. Call set_disassembler_options. (show_disassembly_style_sfunc): New function. (arm_gdbarch_init): Call set_gdbarch_disassembler_options and set_gdbarch_verify_disassembler_options. (_initialize_arm_tdep): Delete regnames variable and update callers. (arm_disassembler_options): Initialize. (disasm_options): New variable. (num_disassembly_options): Rename from this... (num_disassembly_styles): ...to this. Compute by scanning through disasm_options. (valid_disassembly_styles): Initialize using disasm_options. Remove calls to parse_arm_disassembler_option, get_arm_regnames and set_arm_regname_option. Pass show_disassembly_style_sfunc to the "disassembler" setshow command. * rs6000-tdep.c (powerpc_disassembler_options): New static variable. (rs6000_gdbarch_init): Call set_gdbarch_disassembler_options and set_gdbarch_verify_disassembler_options. * s390-tdep.c (s390_disassembler_options): New static variable. (s390_gdbarch_init):all set_gdbarch_disassembler_options and set_gdbarch_verify_disassembler_options. 2017-02-27 Simon Marchi * remote.c (remote_add_target_side_condition): Remove "struct" keyword from range-based for loop. 2017-02-27 Simon Marchi * remote.c (remote_add_target_side_condition): Use range-based for loop. Update comment. 2017-02-27 Yao Qi * f-typeprint.c (f_print_type): Check "varstring" is empty first. 2017-02-26 Alan Hayward * regcache.c (regcache_raw_update): New function. (regcache_raw_read): Move code to regcache_raw_update. * regcache.h (regcache_raw_update): New declaration. * remote.c (remote_prepare_to_store): Call regcache_raw_update. 2017-02-26 Jan Kratochvil * dwarf2read.c (create_debug_type_hash_table): Initialize header.signature and header.type_offset_in_tu. 2017-02-24 Pedro Alves * symtab.c (make_file_symbol_completion_list_1): Use add_symtab_completions. 2017-02-24 Alan Hayward * stack.c (frame_info): Use frame_unwind_register_value to avoid buf. 2017-02-24 Alan Hayward * i386-tdep.c (i386_pseudo_register_read_into_value): Use I386_MAX_REGISTER_SIZE. (i386_pseudo_register_write): Likewise. (i386_process_record): Likewise. * i387-tdep.c (i387_supply_xsave): Likewise. * m68k-linux-nat.c (fetch_register): Use M68K_MAX_REGISTER_SIZE. (store_register): Likewise. 2017-02-23 Pedro Alves * ada-lang.c: Include "common/function-view.h". (ada_iterate_over_symbols): Adjust to use function_view as callback type. (struct add_partial_datum, ada_complete_symbol_matcher): Delete. (ada_make_symbol_completion_list): Use a lambda. (ada_exc_search_name_matches): Delete. (name_matches_regex): New. (ada_add_global_exceptions): Use a lambda and name_matches_regex. * compile/compile-c-support.c: Include "common/function-view.h". (print_one_macro): Change prototype to accept a ui_file pointer. (write_macro_definitions): Use a lambda. * dwarf2read.c: Include "common/function-view.h". (dw2_map_expand_apply, dw2_map_symtabs_matching_filename) (dw2_expand_symtabs_matching): Adjust to use function_view as callback type. * language.h: Include "common/function-view.h". (struct language_defn) : Adjust to use function_view as callback type. (LA_ITERATE_OVER_SYMBOLS): Remove DATA parameter. * linespec.c: Include "common/function-view.h". (collect_info::add_symbol): New method. (struct symbol_and_data_callback, iterate_inline_only, struct symbol_matcher_data, iterate_name_matcher): Delete. (iterate_over_all_matching_symtabs): Adjust to use function_view as callback type and lambdas. (iterate_over_file_blocks): Adjust to use function_view as callback type. (decode_compound_collector): Now a class with private fields. (decode_compound_collector::release_symbols): New method. (collect_one_symbol): Rename to... (decode_compound_collector::operator()): ... this and adjust. (lookup_prefix_sym): decode_compound_collector construction bits move to decode_compound_collector ctor. Pass the decode_compound_collector object directly as callback. Remove cleanups and use decode_compound_collector::release_symbols instead. (symtab_collector): Now a class with private fields. (symtab_collector::release_symtabs): New method. (add_symtabs_to_list): Rename to... (symtab_collector::operator()): ... this and adjust. (collect_symtabs_from_filename): symtab_collector construction bits move to symtab_collector ctor. Pass the symtab_collector object directly as callback. Remove cleanups and use symtab_collector::release_symtabs instead. (collect_symbols): Delete. (add_matching_symbols_to_info): Use lambdas. * macrocmd.c (print_macro_callback): Delete. (info_macro_command): Use a lambda. (info_macros_command): Pass print_macro_definition as callable directly. (print_one_macro): Remove 'ignore' parameter. (macro_list_command): Adjust. * macrotab.c (macro_for_each_data::fn): Now a function_view. (macro_for_each_data::user_data): Delete field. (foreach_macro): Adjust to call the function_view. (macro_for_each): Adjust to use function_view as callback type. (foreach_macro_in_scope): Adjust to call the function_view. (macro_for_each_in_scope): Adjust to use function_view as callback type. * macrotab.h: Include "common/function-view.h". (macro_callback_fn): Declare a prototype instead of a pointer. Remove "user_data" parameter. (macro_for_each, macro_for_each_in_scope): Adjust to use function_view as callback type. * psymtab.c (partial_map_expand_apply) (psym_map_symtabs_matching_filename, recursively_search_psymtabs): Adjust to use function_view as callback type and to return bool. (psym_expand_symtabs_matching): Adjust to use function_view as callback types. * symfile-debug.c (debug_qf_map_symtabs_matching_filename): Adjust to use function_view as callback type and to return bool. (debug_qf_expand_symtabs_matching): Adjust to use function_view as callback types. * symfile.c (expand_symtabs_matching): Adjust to use function_view as callback types. * symfile.h: Include "common/function-view.h". (expand_symtabs_file_matcher_ftype) (expand_symtabs_symbol_matcher_ftype) (expand_symtabs_exp_notify_ftype): Remove "data" parameter and return bool. (quick_symbol_functions::map_symtabs_matching_filename) (quick_symbol_functions::expand_symtabs_matching): Adjust to use function_view as callback type and return bool. (expand_symtabs_matching): Adjust to use function_view as callback type. (maintenance_expand_name_matcher) (maintenance_expand_file_matcher): Delete. (maintenance_expand_symtabs): Use lambdas. * symtab.c (iterate_over_some_symtabs): Adjust to use function_view as callback types and return bool. (iterate_over_symtabs): Likewise. Use unique_xmalloc_ptr instead of a cleanup. (lookup_symtab_callback): Delete. (lookup_symtab): Use a lambda. (iterate_over_symbols): Adjust to use function_view as callback type. (struct search_symbols_data, search_symbols_file_matches) (search_symbols_name_matches): Delete. (search_symbols): Use a pair of lambdas. (struct add_name_data, add_macro_name, symbol_completion_matcher) (symtab_expansion_callback): Delete. (default_make_symbol_completion_list_break_on_1): Use lambdas. * symtab.h: Include "common/function-view.h". (iterate_over_some_symtabs): Adjust to use function_view as callback type and return bool. (iterate_over_symtabs): Adjust to use function_view as callback type. (symbol_found_callback_ftype): Remove 'data' parameter and return bool. (iterate_over_symbols): Adjust to use function_view as callback type. 2017-02-23 Pedro Alves * Makefile.in (SUBDIR_UNITTESTS_SRCS, SUBDIR_UNITTESTS_OBS): New. (%.o) : New pattern. * configure.ac ($development): Add $(SUBDIR_UNITTESTS_OBS) to CONFIG_OBS, and $(SUBDIR_UNITTESTS_SRCS) to CONFIG_SRCS. * common/function-view.h: New file. * unittests/function-view-selftests.c: New file. * configure: Regenerate. 2017-02-23 Simon Marchi * bsd-uthread.c (bsd_uthread_thread_alive): Use ptid instead of inferior_ptid. * go32-nat.c (go32_thread_alive): Likewise. 2017-02-23 Yao Qi * varobj-iter.h (varobj_iter_delete): Call xfree instead of delete. 2017-02-23 Yao Qi * varobj.c (varobj_clear_saved_item): Use delete instead of xfree. (update_dynamic_varobj_children): Likewise. 2017-02-21 Jan Kratochvil * dwarf2read.c (dwarf2_record_block_ranges): Add forgotten BASEADDR. 2017-02-21 Simon Marchi * common/enum-flags.h (enum_flags::enum_flags): Initialize m_enum_value to 0 in default constructor. 2017-02-21 Edjunior Barbosa Machado * rs6000-tdep.c (LOAD_AND_RESERVE_MASK): Rename from LWARX_MASK. (STORE_CONDITIONAL_MASK): Rename from STWCX_MASK. (LBARX_INSTRUCTION, LHARX_INSTRUCTION, LQARX_INSTRUCTION, STBCX_INSTRUCTION, STHCX_INSTRUCTION, STQCX_INSTRUCTION): New defines. (IS_LOAD_AND_RESERVE_INSN, IS_STORE_CONDITIONAL_INSN): New macros. (ppc_displaced_step_copy_insn): Use IS_LOAD_AND_RESERVE_INSN. (ppc_deal_with_atomic_sequence): Use IS_LOAD_AND_RESERVE_INSN and IS_STORE_CONDITIONAL_INSN. 2017-02-21 Jan Kratochvil * dwarf2_rnglists_process: Initialize range_beginning and range_end. 2017-02-20 Jan Kratochvil * NEWS (Changes since GDB 7.12): Add DWARF-5. 2017-02-20 Jan Kratochvil * dwarf2read.c (skip_one_die, read_attribute_value) (dwarf2_const_value_attr, dump_die_shallow) (dwarf2_get_attr_constant_value, dwarf2_fetch_constant_bytes) (skip_form_bytes, attr_form_is_constant): Handle DW_FORM_data16. 2017-02-20 Jan Kratochvil * dwarf2read.c (read_file_scope): Rename DW_MACRO_GNU_*. (dwarf_parse_macro_header): Accept DWARF version 5. (dwarf_decode_macro_bytes, dwarf_decode_macros): Rename DW_MACRO_GNU_*. 2017-02-20 Jan Kratochvil * block.c (call_site_for_pc): Rename DW_OP_GNU_*, DW_TAG_GNU_* and DW_AT_GNU_*. * common/common-exceptions.h (enum errors): Likewise. * dwarf2-frame.c (class dwarf_expr_executor): Likewise. * dwarf2expr.c (dwarf_block_to_dwarf_reg) (dwarf_expr_context::execute_stack_op): Likewise. * dwarf2expr.h (struct dwarf_expr_context, struct dwarf_expr_piece): Likewise. * dwarf2loc.c (dwarf_evaluate_loc_desc::get_base_type) (dwarf_evaluate_loc_desc::push_dwarf_reg_entry_value) (show_entry_values_debug, call_site_to_target_addr) (func_addr_to_tail_call_list, func_verify_no_selftailcall) (dwarf_expr_reg_to_entry_parameter, dwarf_entry_parameter_to_value) (entry_data_value_free_closure, value_of_dwarf_reg_entry) (value_of_dwarf_block_entry, indirect_pieced_value) (symbol_needs_eval_context::push_dwarf_reg_entry_value): (disassemble_dwarf_expression): Likewise. * dwarf2read.c (process_die, inherit_abstract_dies) (read_call_site_scope): Likewise. * gdbtypes.h (struct func_type, struct call_site_parameter) (struct call_site): Likewise. * stack.c (read_frame_arg): Likewise. * std-operator.def (OP_VAR_ENTRY_VALUE): Likewise. 2017-02-20 Jan Kratochvil * defs.h (read_unsigned_leb128): New declaration. * dwarf2loc.c (decode_debug_loclists_addresses): New function. (decode_debug_loc_dwo_addresses): Update DEBUG_LOC_* to DW_LLE_*. (dwarf2_find_location_expression): Call also decode_debug_loclists_addresses. Handle DWARF-5 ULEB128 length. * dwarf2loc.h (dwarf2_version): New declaration. * dwarf2read.c (struct dwarf2_per_objfile): Add loclists, line_str, rnglists. (dwarf2_elf_names): Add .debug_loclists, .debug_line_str, .debug_rnglists. (struct dwop_section_names): Add loclists_dwo. (dwop_section_names): Add .debug_loclists.dwo. (struct comp_unit_head): Add unit_type, signature, type_offset_in_tu. (struct dwarf2_per_cu_data): Add dwarf_version. (struct dwo_sections): Add loclists. (struct attr_abbrev): Add implicit_const. (read_indirect_line_string): New declaration. (read_unsigned_leb128): Delete declaration. (rcuh_kind): New definition. (read_and_check_comp_unit_head): Change parameter is_debug_types_section to section_kind. (dwarf2_locate_sections): Handle loclists, line_str and rnglists. (read_comp_unit_head): Change parameter abfd to section, add parameter section_kind. Handle DWARF-5. (error_check_comp_unit_head): Accept also DWARF version 5. (read_and_check_comp_unit_head): Change parameter is_debug_types_section to section_kind. (read_and_check_type_unit_head): Delete function. (read_abbrev_offset): Handle DWARF-5. (create_debug_type_hash_table): Add parameter section_kind. Process only DW_UT_type. Use signature and type_offset_in_tu from struct comp_unit_head. (create_debug_types_hash_table): Update create_debug_type_hash_table caller. (create_all_type_units): Call create_debug_type_hash_table. (read_cutu_die_from_dwo, init_cutu_and_read_dies): Change read_and_check_type_unit_head caller to read_and_check_comp_unit_head caller. (skip_one_die): Handle DW_FORM_implicit_const. (dwarf2_rnglists_process): New function. (dwarf2_ranges_process): Call dwarf2_rnglists_process for DWARF-5. (abbrev_table_read_table): Handle DW_FORM_implicit_const. (read_attribute_value): Handle DW_FORM_implicit_const, DW_FORM_line_strp. (read_attribute): Handle DW_FORM_implicit_const. (read_indirect_string_at_offset_from): New function from read_indirect_string_at_offset. (read_indirect_string_at_offset): Call read_indirect_string_at_offset_from. (read_indirect_line_string_at_offset): New function. (read_indirect_string): New function comment. (read_indirect_line_string): New function. (read_unsigned_leb128): Make it global. (dwarf2_string_attr): Handle DWARF-5. (add_include_dir_stub, read_formatted_entries): New functions. (dwarf_decode_line_header, dump_die_shallow, cu_debug_loc_section): Handle DWARF-5. (per_cu_header_read_in): Update read_comp_unit_head caller. (dwarf2_version): New function. * symfile.h (struct dwarf2_debug_sections): Add loclists, line_str and rnglists. * xcoffread.c (dwarf2_xcoff_names): Update struct dwarf2_debug_sections fields. 2017-02-20 Jan Kratochvil * dwarf2read.c (abbrev_table_read_table): Read the data only once. 2017-02-20 Jan Kratochvil * dwarf2read.c (dwarf2_ranges_process): New function from dwarf2_ranges_read. (dwarf2_ranges_read, dwarf2_record_block_ranges): Use dwarf2_ranges_process. 2017-02-20 Jan Kratochvil * dwarf2read.c (create_debug_type_hash_table): New function from create_debug_types_hash_table. (create_debug_types_hash_table): Call create_debug_type_hash_table. (create_all_type_units, open_and_init_dwo_file): Update create_debug_types_hash_table callers. 2017-02-20 Sergio Durigan Junior PR gdb/16188 * fork-child.c (trace_start_error): Fix thinko. va_end should refer to 'ap', not 'args'. 2017-02-20 Sergio Durigan Junior Pedro Alves PR gdb/16188 * darwin-nat.c (darwin_ptrace_me): Check if calls to system calls succeeded. * fork-child.c (trace_start_error): New function. (trace_start_error_with_name): Likewise. * gnu-nat.c (gnu_ptrace_me): Check if call to PTRACE succeeded. * inf-ptrace.c (inf_ptrace_me): Likewise. * inferior.h (trace_start_error): New prototype. (trace_start_error_with_name): Likewise. 2017-02-15 Sergio Durigan Junior PR gdb/21164 * psymtab.c (maintenance_print_psymbols): Verify if 'argv' is not NULL before using it. * symmisc.c (maintenance_print_symbols): Likewise. (maintenance_print_msymbols): Likewise. 2017-02-14 Tim Wiederhake * NEWS: Add record Python bindings entry. 2017-02-14 Tim Wiederhake * Makefile.in (SUBDIR_PYTHON_OBS): Add py-record-btrace.o, py-record-full.o. (SUBDIR_PYTHON_SRCS): Add py-record-btrace.c, py-record-full.c. * python/py-record-btrace.c, python/py-record-btrace.h, python/py-record-full.c, python/py-record-full.h: New file. * python/py-record.c: Add include for py-record-btrace.h and py-record-full.h. (recpy_method, recpy_format, recpy_goto, recpy_replay_position, recpy_instruction_history, recpy_function_call_history, recpy_begin, recpy_end): Use functions from py-record-btrace.c and py-record-full.c. * python/python-internal.h (PyInt_FromSsize_t, PyInt_AsSsize_t): New definition. (gdbpy_initialize_btrace): New export. * python/python.c (_initialize_python): Add gdbpy_initialize_btrace. 2017-02-14 Tim Wiederhake * Makefile.in (SUBDIR_PYTHON_OBS): Add python/py-record.o. (SUBDIR_PYTHON_SRCS): Add python/py-record.c. * python/py-record.c: New file. * python/python-internal.h (gdbpy_start_recording, gdbpy_current_recording, gdpy_stop_recording, gdbpy_initialize_record): New export. * python/python.c (_initialize_python): Add gdbpy_initialize_record. (python_GdbMethods): Add gdbpy_start_recording, gdbpy_current_recording and gdbpy_stop_recording. 2017-02-14 Tim Wiederhake * record-btrace.c (record_btrace_record_method): New function. (init_record_btrace_ops): Initialize to_record_method. * record-full.c (record_full_record_method): New function. (init_record_full_ops, init_record_full_core_ops): Add record_full_record_method. * record.h (enum record_method): New enum. * target-debug.h (target_debug_print_enum_record_method: New define. * target-delegates.c: Regenerate. * target.c (target_record_method): New function. * target.h: Include record.h. (struct target_ops) : New field. (target_record_method): New export. 2017-02-14 Tim Wiederhake * record.h (record_start, record_stop): New export. * record.c (record_start, record_stop): New function. 2017-02-14 Tim Wiederhake * btrace.c (btrace_fetch): Copy function call segments pointer into a vector. (btrace_clear): Clear the vector. (btrace_find_insn_by_number): Use binary search to find the correct function call segment. * btrace.h (brace_fun_p): New typedef. (struct btrace_thread_info) : New field. 2017-02-14 Tim Wiederhake * record-btrace.c (btrace_ui_out_decode_error): Move most of it ... * btrace.c (btrace_decode_error): ... here. New function. * btrace.h (btrace_decode_error): New export. 2017-02-14 Tim Wiederhake * btrace.c (ftrace_call_num_insn, btrace_insn_get_error): New function. (ftrace_new_function, btrace_insn_number, btrace_insn_cmp, btrace_find_insn_by_number): Remove special case for gaps. * btrace.h (btrace_insn_get_error): New export. (btrace_insn_number, btrace_find_insn_by_number): Adjust comment. * record-btrace.c (btrace_insn_history): Print number for gaps. (record_btrace_info, record_btrace_goto): Handle gaps. 2017-02-14 Tom Tromey PR python/13598: * python/python.c (gdbpy_before_prompt_hook): Emit before_prompt event. * python/py-evts.c (gdbpy_initialize_py_events): Add before_prompt registry. * python/py-events.h (events_object) : New field. 2017-02-14 Markus Metzger * btrace.c (ftrace_new_switch): Preserve up link and flags. 2017-02-13 Luis Machado * symfile (_initialize_symfile): Add usage text to the load command's help text. 2017-02-10 Simon Marchi * utils.c (defaulted_query): Don't query on secondary UIs. 2017-02-10 Tom Tromey * rust-lang.c (rust_get_disr_info): Remove unused variable. 2017-02-10 Tom Tromey * python/py-value.c (valpy_richcompare_throw): Remove unnecessary "cleanup" local. * python/py-type.c (typy_legacy_template_argument): Remove unnecessary "cleanup" local. 2017-02-10 Tom Tromey * python/python.c (do_start_initialization): New function, from _initialize_python. (_initialize_python): Call do_start_initialization. * python/py-linetable.c (ltpy_iternext): Use explicit returns, not goto. 2017-02-10 Tom Tromey * python/py-prettyprint.c (pretty_print_one_value): Use gdbpy_ref. 2017-02-10 Tom Tromey * python/py-cmd.c (cmdpy_destroyer): Use gdbpy_ref. * python/py-breakpoint.c (gdbpy_breakpoint_deleted): Use gdbpy_ref. * python/py-type.c (field_new): Use gdbpy_ref. * python/py-symtab.c (symtab_and_line_to_sal_object): Use gdbpy_ref. * python/py-progspace.c (pspy_new): Use gdbpy_ref. (py_free_pspace): Likewise. (pspace_to_pspace_object): Likewise. * python/py-objfile.c (objfpy_new): Use gdbpy_ref. (py_free_objfile): Likewise. (objfile_to_objfile_object): Likewise. * python/py-inferior.c (delete_thread_object): Use gdbpy_ref. (infpy_read_memory): Likewise. (py_free_inferior): Likewise. * python/py-evtregistry.c (create_eventregistry_object): Use gdbpy_ref. * python/py-event.c (create_event_object): Use gdbpy_ref. 2017-02-10 Tom Tromey * python/py-ref.h (gdbpy_ref_policy): Now a template. (gdbpy_ref): Now a template; allow subclasses of PyObject to be used. * python/py-arch.c, python/py-bpevent.c, python/py-breakpoint.c, python/py-cmd.c, python/py-continueevent.c, python/py-event.c, python/py-exitedevent.c, python/py-finishbreakpoint.c, python/py-framefilter.c, python/py-function.c, python/py-inferior.c, python/py-infevents.c, python/py-linetable.c, python/py-newobjfileevent.c, python/py-param.c, python/py-prettyprint.c, python/py-ref.h, python/py-signalevent.c, python/py-stopevent.c, python/py-symbol.c, python/py-threadevent.c, python/py-type.c, python/py-unwind.c, python/py-utils.c, python/py-value.c, python/py-varobj.c, python/py-xmethods.c, python/python.c, varobj.c: Change gdbpy_ref to gdbpy_ref<>. 2017-02-10 Tom Tromey * ui-out.h (ui_out_emit_type): New class. (ui_out_emit_tuple, ui_out_emit_list): New typedefs. * python/py-framefilter.c (py_print_single_arg): Use gdb::optional and ui_out_emit_tuple. (enumerate_locals): Likewise. (py_mi_print_variables, py_print_locals, py_print_args): Use ui_out_emit_list. (py_print_frame): Use gdb::optional, ui_out_emit_tuple, ui_out_emit_list. * common/gdb_optional.h: New file. 2017-02-10 Martin Galvan * MAINTAINERS (Write After Approval): Update my e-mail address. 2017-02-10 Martin Galvan PR gdb/21122 * breakpoint.c (_initialize_breakpoint): Update the help description of the 'commands' command to indicate that it takes a list argument. 2017-02-09 Simon Marchi * interps.c (current_interp_set_logging): Remove "return". 2017-02-09 Gary Benson * symtab.c (add_symtab_completions): Prevent NULL pointer dereference. 2017-02-08 Pedro Alves * interps.c (interp::interp): Remove reference to quiet_p. (interp_set): Make static. Remove dead "Switching to" output code. (interp_quiet_p, interp_set_quiet): Delete. (interpreter_exec_cmd): Don't set the interpreter quiet. * interps.h (interp_quiet_p): Make static. (class interp) : Remove field 2017-02-08 Jerome Guitton * cli/cli-decode.c (find_command_name_length): Make it extern. * cli/cli-decode.h (find_command_name_length): Declare. * cli/cli-script.c (command_name_equals, line_first_arg): New functions. (process_next_line): Use cli-decode to parse command names. (build_command_line): Make args a constant pointer. 2017-02-08 Jerome Guitton * cli-decode.c (lookup_cmd_1, lookup_cmd_composition): Remove case-insensitive search. 2017-02-07 Jose E. Marchesi * sparc-tdep.c (sparc32_gdbarch_init): Do not place a + operator at the end of the line. Avoids an ARI warning. 2017-02-06 Luis Machado * NEWS: Mention support for record/replay of Intel 64 rdrand and rdseed instructions. i386-tdep.c (i386_process_record): Handle Intel 64 rdrand and rseed. 2017-02-06 Ivo Raisr PR tdep/20936 Provide and use sparc32 and sparc64 target description XML files. * features/sparc/sparc32-cp0.xml, features/sparc/sparc32-cpu.xml, features/sparc/sparc32-fpu.xml: New files for sparc 32-bit. * features/sparc/sparc64-cp0.xml, features/sparc/sparc64-cpu.xml, features/sparc/sparc64-fpu.xml: New files for sparc 64-bit. * features/sparc/sparc32-solaris.xml: New file. * features/sparc/sparc64-solaris.xml: New file. * features/sparc/sparc32-solaris.c: Generated. * features/sparc/sparc64-solaris.c: Generated. * sparc-tdep.h: Account for differences in target descriptions. * sparc-tdep.c (sparc32_register_name): Use target provided registers. (sparc32_register_type): Use target provided registers. (validate_tdesc_registers): New function. (sparc32_gdbarch_init): Use tdesc_has_registers. Set pseudoregister functions. * sparc64-tdep.c (sparc64_register_name): Use target provided registers. (sparc64_register_type): Use target provided registers. (sparc64_init_abi): Set pseudoregister functions. 2017-02-03 Tom Tromey PR rust/21097: * rust-lang.c (rust_print_type) : Handle enums with a single member. 2017-02-03 Pedro Alves * cli/cli-interp.c (cli_interp_base::cli_interp_base) (cli_interp_base::~cli_interp_base): New. (cli_interp): New struct. (as_cli_interp): Cast the interp itself to cli_interp. (cli_interpreter_pre_command_loop): Rename to ... (cli_interp_base::pre_command_loop): ... this. Remove 'self' parameter. (cli_interpreter_init): Rename to ... (cli_interp::init): ... this. Remove 'self' parameter. Use boolean. Make extern. (cli_interpreter_resume): Rename to ... (cli_interp::resume): ... this. Remove 'data' parameter. Make extern. (cli_interpreter_suspend): Rename to ... (cli_interp::suspend): ... this. Remove 'data' parameter. Make extern. (cli_interpreter_exec): Rename to ... (cli_interp::exec): ... this. Remove 'data' parameter. Make extern. (cli_interpreter_supports_command_editing): Rename to ... (cli_interp_base::supports_command_editing): ... this. Remove 'interp' parameter. Make extern. (cli_ui_out): Rename to ... (cli_interp::interp_ui_out): ... this. Remove 'interp' parameter. Make extern. (cli_set_logging): Rename to ... (cli_interp_base::set_logging): ... this. Remove 'interp' parameter. Make extern. (cli_interp_procs): Delete. (cli_interp_factory): Adjust to use "new". * cli/cli-interp.h: Include "interps.h". (struct cli_interp_base): New struct. * interps.c (struct interp): Delete. Fields moved to interps.h. (interp_new): Delete. (interp::interp, interp::~interp): New. (interp_set): Use bool, and return void. Assume the interpreter has suspend, init and resume methods, and that the all return void. (set_top_level_interpreter): interp_set returns void. (interp_ui_out): Adapt. (current_interp_set_logging): Adapt. (interp_data): Delete. (interp_pre_command_loop, interp_supports_command_editing): Adapt. (interp_exec): Adapt. (top_level_interpreter_data): Delete. * interps.h (interp_init_ftype, interp_resume_ftype) (interp_suspend_ftype, interp_exec_ftype) (interp_pre_command_loop_ftype, interp_ui_out_ftype): Delete. (class interp): New. (interp_new): Delete. (interp_set): Now returns void. Use bool. (interp_data, top_level_interpreter_data): Delete. * mi/mi-common.h: Include interps.h. (class mi_interp): Inherit from interp. Define a ctor. Declare init, resume, suspect, exec, interp_ui_out, set_logging and pre_command_loop methods. * mi/mi-interp.c (as_mi_interp): Cast the interp itself. (mi_interpreter_init): Rename to ... (mi_interp::init): ... this. Remove the 'interp' parameter, use bool, return void and make extern. Adjust. (mi_interpreter_resume): ... Rename to ... (mi_interp::resume): ... this. Remove the 'data' parameter, return void and make extern. Adjust. (mi_interpreter_suspend): ... Rename to ... (mi_interp::suspend): ... this. Remove the 'data' parameter, return void and make extern. Adjust. (mi_interpreter_exec): ... Rename to ... (mi_interp::exec): ... this. Remove the 'data' parameter and make extern. Adjust. (mi_interpreter_pre_command_loop): ... Rename to ... (mi_interp::pre_command_loop): ... this. Remove the 'self' parameter and make extern. (mi_on_normal_stop_1): Adjust. (mi_ui_out): Rename to ... (mi_interp::interp_ui_out): ... this. Remove the 'interp' parameter and make extern. Adjust. (mi_set_logging): Rename to ... (mi_interp::set_logging): ... this. Remove the 'interp' parameter and make extern. Adjust. (mi_interp_procs): Delete. (mi_interp_factory): Adjust to use 'new'. * mi/mi-main.c (mi_cmd_gdb_exit, captured_mi_execute_command) (mi_print_exception, mi_execute_command, mi_load_progress): Adjust. * tui/tui-interp.c (tui_interp): New class. (as_tui_interp): Return a tui_interp pointer. (tui_on_normal_stop, tui_on_signal_received) (tui_on_end_stepping_range, tui_on_signal_exited, tui_on_exited) (tui_on_no_history, tui_on_user_selected_context_changed): Adjust to use interp::interp_ui_out. (tui_init): Rename to ... (tui_interp::init): ... this. Remove the 'self' parameter, use bool, return void and make extern. Adjust. (tui_resume): Rename to ... (tui_interp::resume): ... this. Remove the 'data' parameter, return void and make extern. Adjust. (tui_suspend): Rename to ... (tui_interp::suspend): ... this. Remove the 'data' parameter, return void and make extern. Adjust. (tui_ui_out): Rename to ... (tui_interp::interp_ui_out): ... this. Remove the 'self' parameter, and make extern. Adjust. (tui_exec): Rename to ... (tui_interp::exec): ... this. Remove the 'data' parameter and make extern. (tui_interp_procs): Delete. (tui_interp_factory): Use "new". 2017-02-02 Tom Tromey * rust-exp.y (ends_raw_string, space_then_number) (rust_identifier_start_p): Return bool. * rust-lang.c (rust_tuple_type_p, rust_underscore_fields) (rust_tuple_struct_type_p, rust_tuple_variant_type_p) (rust_slice_type_p, rust_range_type_p, rust_u8_type_p) (rust_chartype_p): Return bool. (val_print_struct, rust_print_struct_def, rust_print_type): Update. * rust-lang.h (rust_tuple_type_p, rust_tuple_struct_type_p): Return bool. 2017-02-02 Tom Tromey * rust-lang.c: Reindent. 2017-02-02 Tom Tromey * rust-lang.h (rust_crate_for_block): Update. * rust-lang.c (rust_crate_for_block): Return std::string. (rust_get_disr_info): Use std:;string, not gdb::unique_xmalloc_ptr. * rust-exp.y (crate_name): Update. 2017-02-02 Pedro Alves * disasm-selftests.c (print_one_insn_test): Move the "verbose" field out of gdb_disassembler_test and make it static. 2017-02-02 Pedro Alves * mi/mi-common.h (struct mi_interp): Delete the mi2_interp, mi1_interp and mi_interp fields. 2017-02-02 Pedro Alves * cli/cli-interp.c (struct saved_output_files, saved_output): Moved from cli/cli-logging.c. (cli_set_logging): New function. (cli_interp_procs): Install cli_set_logging. * cli/cli-interp.h (make_logging_output, cli_set_logging): Declare. * cli/cli-logging.c (struct saved_output_files, saved_output): Moved to cli/cli-interp.c. (pop_output_files): Don't save outputs here. (make_logging_output): New function. (handle_redirections): Don't build tee nor save previous outputs here. * interps.c (current_interp_set_logging): Change prototype. Assume there's always a set_logging_proc method installed. * interps.h (interp_set_logging_ftype): Change prototype. (current_interp_set_logging): Change prototype and adjust comment. * mi/mi-interp.c (mi_set_logging): Change protototype. Adjust to use make_logging_output. * tui/tui-interp.c (tui_interp_procs): Install cli_set_logging. 2017-02-02 Pedro Alves * cli/cli-logging.c (maybe_warn_already_logging): New factored out from ... (set_logging_overwrite): ... here. (logging_no_redirect_file): Delete. (set_logging_redirect): Don't handle redirection on the fly. Instead warn that "logging off" / "logging on" is necessary. (pop_output_files): Delete references to logging_no_redirect_file. (show_logging_command): Always speak in terms of what will happen once logging is reenabled. 2017-02-02 Pedro Alves * disasm.h (gdb_pretty_print_disassembler): Tweak intro comment. 2017-02-02 Pedro Alves * disasm.c (gdb_pretty_print_insn): Rename to ... (gdb_pretty_print_disassembler::pretty_print_insn): ... this. Remove gdbarch parameter. Adapt to clear the object's buffers instead of allocating new buffers, and to print using the object's gdb_disassembler instead of calling gdb_print_insn. (dump_insns): Use gdb_pretty_print_disassembler. * disasm.h (gdb_pretty_print_insn): Delete declaration. (gdb_pretty_print_disassembler): New class. * record-btrace.c (btrace_insn_history): Use gdb_pretty_print_disassembler. 2017-02-02 Pedro Alves * ada-lang.c (type_as_string): Use string_file. * ada-valprint.c (ada_print_floating): Use string_file. * ada-varobj.c (ada_varobj_scalar_image) (ada_varobj_get_value_image): Use string_file. * aix-thread.c (aix_thread_extra_thread_info): Use string_file. * arm-tdep.c (_initialize_arm_tdep): Use string_printf. * breakpoint.c (update_inserted_breakpoint_locations) (insert_breakpoint_locations, reattach_breakpoints) (print_breakpoint_location, print_one_detail_ranged_breakpoint) (print_it_watchpoint): Use string_file. (save_breakpoints): Use stdio_file. * c-exp.y (oper): Use string_file. * cli/cli-logging.c (set_logging_redirect): Use ui_file_up and tee_file. (pop_output_files): Use delete. (handle_redirections): Use stdio_file and tee_file. * cli/cli-setshow.c (do_show_command): Use string_file. * compile/compile-c-support.c (c_compute_program): Use string_file. * compile/compile-c-symbols.c (generate_vla_size): Take a 'string_file &' instead of a 'ui_file *'. (generate_c_for_for_one_variable): Take a 'string_file &' instead of a 'ui_file *'. Use string_file. (generate_c_for_variable_locations): Take a 'string_file &' instead of a 'ui_file *'. * compile/compile-internal.h (generate_c_for_for_one_variable): Take a 'string_file &' instead of a 'ui_file *'. * compile/compile-loc2c.c (push, pushf, unary, binary) (print_label, pushf_register_address, pushf_register) (do_compile_dwarf_expr_to_c): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * compile/compile.c (compile_to_object): Use string_file. * compile/compile.h (compile_dwarf_expr_to_c) (compile_dwarf_bounds_to_c): Take a 'string_file &' instead of a 'ui_file *'. * cp-support.c (inspect_type): Use string_file and obstack_copy0. (replace_typedefs_qualified_name): Use string_file and obstack_copy0. * disasm.c (gdb_pretty_print_insn): Use string_file. (gdb_disassembly): Adjust reference the null_stream global. (do_ui_file_delete): Delete. (gdb_insn_length): Use null_stream. * dummy-frame.c (maintenance_print_dummy_frames): Use stdio_file. * dwarf2loc.c (dwarf2_compile_property_to_c) (locexpr_generate_c_location, loclist_generate_c_location): Take a 'string_file &' instead of a 'ui_file *'. * dwarf2loc.h (dwarf2_compile_property_to_c): Likewise. * dwarf2read.c (do_ui_file_peek_last): Delete. (dwarf2_compute_name): Use string_file. * event-top.c (gdb_setup_readline): Use stdio_file. * gdbarch.sh (verify_gdbarch): Use string_file. * gdbtypes.c (safe_parse_type): Use null_stream. * guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Use string_file. * guile/scm-disasm.c (gdbscm_print_insn_from_port): Take a 'string_file *' instead of a 'ui_file *'. (gdbscm_arch_disassemble): Use string_file. * guile/scm-frame.c (frscm_print_frame_smob): Use string_file. * guile/scm-ports.c (class ioscm_file_port): Now a class that inherits from ui_file. (ioscm_file_port_delete, ioscm_file_port_rewind) (ioscm_file_port_put): Delete. (ioscm_file_port_write): Rename to ... (ioscm_file_port::write): ... this. Remove file_port_magic checks. (ioscm_file_port_new): Delete. (ioscm_with_output_to_port_worker): Use ioscm_file_port and ui_file_up. * guile/scm-type.c (tyscm_type_name): Use string_file. * guile/scm-value.c (vlscm_print_value_smob, gdbscm_value_print): Use string_file. * infcmd.c (print_return_value_1): Use string_file. * infrun.c (print_target_wait_results): Use string_file. * language.c (add_language): Use string_file. * location.c (explicit_to_string_internal): Use string_file. * main.c (captured_main_1): Use null_file. * maint.c (maintenance_print_architecture): Use stdio_file. * mi/mi-cmd-stack.c (list_arg_or_local): Use string_file. * mi/mi-common.h (struct mi_interp) : Change type to mi_console_file pointer. * mi/mi-console.c (mi_console_file_fputs, mi_console_file_flush) (mi_console_file_delete): Delete. (struct mi_console_file): Delete. (mi_console_file_magic): Delete. (mi_console_file_new): Delete. (mi_console_file::mi_console_file): New. (mi_console_file_delete): Delete. (mi_console_file_fputs): Delete. (mi_console_file::write): New. (mi_console_raw_packet): Delete. (mi_console_file::flush): New. (mi_console_file_flush): Delete. (mi_console_set_raw): Rename to ... (mi_console_file::set_raw): ... this. * mi/mi-console.h (class mi_console_file): New class. (mi_console_file_new, mi_console_set_raw): Delete. * mi/mi-interp.c (mi_interpreter_init): Use mi_console_file. (mi_set_logging): Use delete and tee_file. Adjust. * mi/mi-main.c (output_register): Use string_file. (mi_cmd_data_evaluate_expression): Use string_file. (mi_cmd_data_read_memory): Use string_file. (mi_cmd_execute, print_variable_or_computed): Use string_file. * mi/mi-out.c (mi_ui_out::main_stream): New. (mi_ui_out::rewind): Use main_stream and string_file. (mi_ui_out::put): Use main_stream and string_file. (mi_ui_out::mi_ui_out): Remove 'stream' parameter. Allocate a 'string_file' instead. (mi_out_new): Don't allocate a mem_fileopen stream here. * mi/mi-out.h (mi_ui_out::mi_ui_out): Remove 'stream' parameter. (mi_ui_out::main_stream): Declare method. * printcmd.c (eval_command): Use string_file. * psymtab.c (maintenance_print_psymbols): Use stdio_file. * python/py-arch.c (archpy_disassemble): Use string_file. * python/py-breakpoint.c (bppy_get_commands): Use string_file. * python/py-frame.c (frapy_str): Use string_file. * python/py-framefilter.c (py_print_type, py_print_single_arg): Use string_file. * python/py-type.c (typy_str): Use string_file. * python/py-unwind.c (unwind_infopy_str): Use string_file. * python/py-value.c (valpy_str): Use string_file. * record-btrace.c (btrace_insn_history): Use string_file. * regcache.c (regcache_print): Use stdio_file. * reggroups.c (maintenance_print_reggroups): Use stdio_file. * remote.c (escape_buffer): Use string_file. * rust-lang.c (rust_get_disr_info): Use string_file. * serial.c (serial_open_ops_1): Use stdio_file. (do_serial_close): Use delete. * stack.c (print_frame_arg): Use string_file. (print_frame_args): Remove local mem_fileopen stream, not used. (print_frame): Use string_file. * symmisc.c (maintenance_print_symbols): Use stdio_file. * symtab.h (struct symbol_computed_ops) : Take a 'string_file *' instead of a 'ui_file *'. * top.c (new_ui): Use stdio_file and stderr_file. (free_ui): Use delete. (execute_command_to_string): Use string_file. (quit_confirm): Use string_file. * tracepoint.c (collection_list::append_exp): Use string_file. * tui/tui-disasm.c (tui_disassemble): Use string_file. * tui/tui-file.c: Don't include "ui-file.h". (enum streamtype, struct tui_stream): Delete. (tui_file_new, tui_file_delete, tui_fileopen, tui_sfileopen) (tui_file_isatty, tui_file_rewind, tui_file_put): Delete. (tui_file::tui_file): New method. (tui_file_fputs): Delete. (tui_file_get_strbuf): Delete. (tui_file::puts): New method. (tui_file_adjust_strbuf): Delete. (tui_file_flush): Delete. (tui_file::flush): New method. * tui/tui-file.h: Tweak intro comment. Include ui-file.h. (tui_fileopen, tui_sfileopen, tui_file_get_strbuf) (tui_file_adjust_strbuf): Delete declarations. (class tui_file): New class. * tui/tui-io.c (tui_initialize_io): Use tui_file. * tui/tui-regs.c (tui_restore_gdbout): Use delete. (tui_register_format): Use string_stream. * tui/tui-stack.c (tui_make_status_line): Use string_file. (tui_get_function_from_frame): Use string_file. * typeprint.c (type_to_string): Use string_file. * ui-file.c (struct ui_file, ui_file_magic, ui_file_new): Delete. (null_stream): New global. (ui_file_delete): Delete. (ui_file::ui_file): New. (null_file_isatty): Delete. (ui_file::~ui_file): New. (null_file_rewind): Delete. (ui_file::printf): New. (null_file_put): Delete. (null_file_flush): Delete. (ui_file::putstr): New. (null_file_write): Delete. (ui_file::putstrn): New. (null_file_read): Delete. (ui_file::putc): New. (null_file_fputs): Delete. (null_file_write_async_safe): Delete. (ui_file::vprintf): New. (null_file_delete): Delete. (null_file::write): New. (null_file_fseek): Delete. (null_file::puts): New. (ui_file_data): Delete. (null_file::write_async_safe): New. (gdb_flush, ui_file_isatty): Adjust. (ui_file_put, ui_file_rewind): Delete. (ui_file_write): Adjust. (ui_file_write_for_put): Delete. (ui_file_write_async_safe, ui_file_read): Adjust. (ui_file_fseek): Delete. (fputs_unfiltered): Adjust. (set_ui_file_flush, set_ui_file_isatty, set_ui_file_rewind) (set_ui_file_put, set_ui_file_write, set_ui_file_write_async_safe) (set_ui_file_read, set_ui_file_fputs, set_ui_file_fseek) (set_ui_file_data): Delete. (string_file::~string_file, string_file::write) (struct accumulated_ui_file, do_ui_file_xstrdup, ui_file_xstrdup) (do_ui_file_as_string, ui_file_as_string): Delete. (do_ui_file_obsavestring, ui_file_obsavestring): Delete. (struct mem_file): Delete. (mem_file_new): Delete. (stdio_file::stdio_file): New. (mem_file_delete): Delete. (stdio_file::stdio_file): New. (mem_fileopen): Delete. (stdio_file::~stdio_file): New. (mem_file_rewind): Delete. (stdio_file::set_stream): New. (mem_file_put): Delete. (stdio_file::open): New. (mem_file_write): Delete. (stdio_file_magic, struct stdio_file): Delete. (stdio_file_new, stdio_file_delete, stdio_file_flush): Delete. (stdio_file::flush): New. (stdio_file_read): Rename to ... (stdio_file::read): ... this. Adjust. (stdio_file_write): Rename to ... (stdio_file::write): ... this. Adjust. (stdio_file_write_async_safe): Rename to ... (stdio_file::write_async_safe) ... this. Adjust. (stdio_file_fputs): Rename to ... (stdio_file::puts) ... this. Adjust. (stdio_file_isatty): Delete. (stdio_file_fseek): Delete. (stdio_file::isatty): New. (stderr_file_write): Rename to ... (stderr_file::write) ... this. Adjust. (stderr_file_fputs): Rename to ... (stderr_file::puts) ... this. Adjust. (stderr_fileopen, stdio_fileopen, gdb_fopen): Delete. (stderr_file::stderr_file): New. (tee_file_magic): Delete. (struct tee_file): Delete. (tee_file::tee_file): New. (tee_file_new): Delete. (tee_file::~tee_file): New. (tee_file_delete): Delete. (tee_file_flush): Rename to ... (tee_file::flush): ... this. Adjust. (tee_file_write): Rename to ... (tee_file::write): ... this. Adjust. (tee_file::write_async_safe): New. (tee_file_fputs): Rename to ... (tee_file::puts): ... this. Adjust. (tee_file_isatty): Rename to ... (tee_file::isatty): ... this. Adjust. * ui-file.h (struct obstack, struct ui_file): Don't forward-declare. (ui_file_new, ui_file_flush_ftype, set_ui_file_flush) (ui_file_write_ftype) (set_ui_file_write, ui_file_fputs_ftype, set_ui_file_fputs) (ui_file_write_async_safe_ftype, set_ui_file_write_async_safe) (ui_file_read_ftype, set_ui_file_read, ui_file_isatty_ftype) (set_ui_file_isatty, ui_file_rewind_ftype, set_ui_file_rewind) (ui_file_put_method_ftype, ui_file_put_ftype, set_ui_file_put) (ui_file_delete_ftype, set_ui_file_data, ui_file_fseek_ftype) (set_ui_file_fseek): Delete. (ui_file_data, ui_file_delete, ui_file_rewind) (struct ui_file): New. (ui_file_up): New. (class null_file): New. (null_stream): Declare. (ui_file_write_for_put, ui_file_put): Delete. (ui_file_xstrdup, ui_file_as_string, ui_file_obsavestring): Delete. (ui_file_fseek, mem_fileopen, stdio_fileopen, stderr_fileopen) (gdb_fopen, tee_file_new): Delete. (struct string_file): New. (struct stdio_file): New. (stdio_file_up): New. (struct stderr_file): New. (class tee_file): New. * ui-out.c (ui_out::field_stream): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * ui-out.h (class ui_out) : Likewise. * utils.c (do_ui_file_delete, make_cleanup_ui_file_delete) (null_stream): Delete. (error_stream): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * utils.h (struct ui_file): Delete forward declaration.. (make_cleanup_ui_file_delete, null_stream): Delete declarations. (error_stream): Take a 'string_file &' instead of a 'ui_file *'. * varobj.c (varobj_value_get_print_value): Use string_file. * xtensa-tdep.c (xtensa_verify_config): Use string_file. * gdbarch.c: Regenerate. 2017-02-02 Pedro Alves * disasm.c (gdb_disassembler::pretty_print_insn): Rename to... (gdb_pretty_print_insn): ... this. Now a free function. Add back a 'gdbarch' parameter. Allocate a mem_fileopen stream here. Adjust to call gdb_print_insn instead of gdb_disassembler::print_insn. (dump_insns, do_mixed_source_and_assembly_deprecated) (do_mixed_source_and_assembly, do_assembly_only): Add back a 'gdbarch' parameter. Remove gdb_disassembler parameter. (gdb_disassembly): Don't allocate a gdb_disassembler here. * disasm.h (gdb_disassembler::pretty_print_insn): Delete declaration. (gdb_pretty_print_insn): Re-add declaration. * record-btrace.c (btrace_insn_history): Don't allocate a gdb_disassembler here. Adjust to call gdb_pretty_print_insn. 2017-02-01 Simon Marchi * disasm.h (gdb_disassembly): Remove file_string parameter. * disasm.c (gdb_disassembly): Likewise. * cli/cli-cmds.c (print_disassembly): Adapt. * mi/mi-cmd-disas.c (mi_cmd_disassemble): Likewise. * stack.c (do_gdb_disassembly): Likewise. 2017-02-01 Andreas Arnez * dwarf2loc.c (dwarf2_evaluate_loc_desc_full): For DWARF_VALUE_LITERAL, no longer ignore the offset on big-endian targets. And if the implicit value is longer than needed, extract the first bytes instead of the "least significant" ones. 2017-02-01 Markus Metzger * btrace.c (btrace_enable): Do not call btrace_add_pc for BTRACE_FORMAT_PT or if can_access_registers_ptid returns false. (btrace_fetch): Assert can_access_registers_ptid. * record-btrace.c (require_btrace_thread, record_btrace_info): Call validate_registers_access. 2017-02-01 Markus Metzger * gdbthread.h (can_access_registers_ptid): New. * thread.c (can_access_registers_ptid): New. 2017-02-01 Pedro Alves * i386-tdep.c (i386_fast_tracepoint_valid_at): Use gdb_insn_length. 2017-01-31 Pedro Alves * mi/mi-interp.c (mi_breakpoint_created, mi_breakpoint_modified): Fix typos. 2017-01-31 Pedro Alves * stack.c (print_frame_args): Remove local mem_fileopen stream, not used. 2017-01-31 Pedro Alves * varobj.c (varobj_value_get_print_value): Remove xstrdup call. 2017-01-31 Pedro Alves * common/scoped_restore.h (scoped_restore_tmpl::scoped_restore_tmpl): Template on T2, and change the value's parameter type to T2. (make_scoped_restore): Likewise. 2017-01-27 Walfred Tedeschi Richard Henderson * amd64-linux-nat.c (PTRACE_ARCH_PRCTL): New define. (amd64_linux_fetch_inferior_registers): Add case to fetch FS_BASE GS_BASE for older kernels. (amd64_linux_store_inferior_registers): Add case to store FS_BASE GS_BASE for older kernels. * amd64-linux-tdep.c (amd64_linux_gregset_reg_offset): Add FS_BASE and GS_BASE to the offset table. (amd64_linux_register_reggroup_p): Add FS_BASE and GS_BASE to the system register group. * amd64-nat.c (amd64_native_gregset_reg_offset): Implements case for older kernels. * amd64-tdep.c (amd64_init_abi): Add segment registers for the amd64 ABI. * amd64-tdep.h (amd64_regnum): Add AMD64_FSBASE_REGNUM and AMD64_GSBASE_REGNUM. (AMD64_NUM_REGS): Set to AMD64_GSBASE_REGNUM + 1. * features/Makefile (amd64-linux.dat, amd64-avx-linux.dat) (amd64-mpx-linux.dat, amd64-avx512-linux.dat, x32-linux.dat) (x32-avx-linux.dat, x32-avx512-linux.dat): Add i386/64bit-segments.xml in those rules. * features/i386/64bit-segments.xml: New file. * features/i386/amd64-avx-mpx-linux.xml: Add 64bit-segments.xml. * features/i386/amd64-avx-linux.xml: Add 64bit-segments.xml. * features/i386/amd64-avx512-linux.xml: Add 64bit-segments.xml. * features/i386/amd64-mpx-linux.xml: Add 64bit-segments.xml. * features/i386/x32-avx512-linux.xml: Add 64bit-segments.xml. * features/i386/x32-avx-linux.xml: Add 64bit-segments.xml. * features/i386/amd64-linux.xml: Add 64bit-segments.xml. * features/i386/amd64-avx-linux.c: Regenerated. * features/i386/amd64-avx-mpx-linux.c: Regenerated. * features/i386/amd64-avx-mpx.c: Regenerated. * features/i386/amd64-avx512-linux.c: Regenerated. * features/i386/amd64-linux.c: Regenerated. * features/i386/amd64-mpx-linux.c: Regenerated. * features/i386/i386-avx-mpx-linux.c: Regenerated. * features/i386/i386-avx-mpx.c: Regenerated. * features/i386/x32-avx-linux.c: Regenerated. * features/i386/x32-avx512-linux.c: Regenerated. * regformats/i386/amd64-avx-linux.dat: Regenerated. * regformats/i386/amd64-avx-mpx-linux.dat: Regenerated. * regformats/i386/amd64-avx512-linux.dat: Regenerated. * regformats/i386/amd64-linux.dat: Regenerated. * regformats/i386/amd64-mpx-linux.dat: Regenerated. * regformats/i386/x32-avx-linux.dat: Regenerated. * regformats/i386/x32-avx512-linux.dat: Regenerated. * regformats/i386/x32-linux.dat: Regenerated. 2017-01-27 Walfred Tedeschi * amd64-linux-tdep.h (AMD64_LINUX_ORIG_RAX_REGNUM): Set to AMD64_NUM_REGS. 2017-01-27 Walfred Tedeschi * amd64-nat.c (amd64_native_gregset_reg_offset): Simplify logic that checks validity of a register number. 2017-01-27 Kees Cook * gdb/arm-linux-nat.c (arm_linux_fetch_inferior_registers): Call fetch_fpregs if target has fpa registers. (arm_linux_store_inferior_registers): Call store_fpregs if target has fpa registers. 2017-01-26 Andreas Arnez * cris-tdep.c (cris_gdbarch_init): Remove check for info.byte_order and force it to BFD_ENDIAN_LITTLE. 2017-01-26 Antoine Tremblay * corelow.c (get_core_register_section): Check for regset existence before checking for REGSET_VARIABLE_SIZE. 2017-01-26 Yao Qi Pedro Alves PR gdb/20939 * disasm.c (gdb_disassembler::dis_asm_memory_error): Don't call memory_error, save memaddr instead. (gdb_disassembler::print_insn): If gdbarch_print_insn returns negative, cal memory_error. * disasm.h (gdb_disassembler) : New field. 2017-01-26 Yao Qi * disasm-selftests.c (memory_error_test): New function. (_initialize_disasm_selftests): Register memory_error_test. 2017-01-26 Yao Qi * Makefile.in (SFILES): Add disasm-selftests.c and selftest-arch.c. (COMMON_OBS): Add disasm-selftests.o and selftest-arch.o. * disasm-selftests.c: New file. * selftest-arch.c: New file. * selftest-arch.h: New file. 2017-01-26 Yao Qi * mep-tdep.c (mep_gdb_print_insn): Set info->arch to bfd_arch_mep. Don't return 0 if section is not found. Call print_insn_mep. 2017-01-26 Pedro Alves Yao Qi * arm-tdep.c: Include "disasm.h". (gdb_print_insn_arm): Update code to get gdbarch. * disasm.c (dis_asm_read_memory): Change it to gdb_disassembler::dis_asm_read_memory. (dis_asm_memory_error): Likewise. (dis_asm_print_address): Likewise. (gdb_pretty_print_insn): Change it to gdb_disassembler::pretty_print_insn. (dump_insns): Add one argument gdb_disassemlber. All callers updated. (do_mixed_source_and_assembly_deprecated): Likewise. (do_mixed_source_and_assembly): Likewise. (do_assembly_only): Likewise. (gdb_disassembler::gdb_disassembler): New. (gdb_disassembler::print_insn): New. * disasm.h (class gdb_disassembler): New. (gdb_pretty_print_insn): Remove declaration. (gdb_disassemble_info): Likewise. * guile/scm-disasm.c (class gdbscm_disassembler): New. (gdbscm_disasm_read_memory_worker): Update. (gdbscm_disasm_read_memory): Update. (gdbscm_disasm_memory_error): Remove. (gdbscm_disasm_print_address): Remove. (gdbscm_disassembler::gdbscm_disassembler): New. (gdbscm_print_insn_from_port): Update. * mips-tdep.c: Include disasm.h. (gdb_print_insn_mips): Update code to get gdbarch. * record-btrace.c (btrace_insn_history): Update. * spu-tdep.c: Include disasm.h. (struct spu_dis_asm_data): Remove. (struct spu_dis_asm_info): New. (spu_dis_asm_print_address): Use spu_dis_asm_info to get SPU id. (gdb_print_insn_spu): Cast disassemble_info to spu_dis_asm_info. 2017-01-26 Yao Qi * disasm.c (do_ui_file_delete): Delete. (gdb_insn_length): Move code creating stream to ... * utils.c (null_stream): ... here. New function. * utils.h (null_stream): Declare. 2017-01-23 Simon Marchi * python/py-inferior.c (find_thread_object): Return directly from the loop. Remove "found" variable. 2017-01-21 Joel Brobecker GDB 7.12.1 released. 2017-01-20 Simon Marchi * python/py-function.c (fnpy_call): Reorder declarations to have the gdbpy_enter object declared first. * python/py-xmethods.c (gdbpy_get_xmethod_arg_types): Likewise. 2017-01-20 Simon Marchi PR python/21068 * python/python-internal.h (PyMem_RawMalloc): Define for Python < 3.4. * python/py-gdb-readline.c (gdbpy_readline_wrapper): Use PyMem_RawMalloc instead of PyMem_Malloc. 2017-01-20 Mike Wrighton Luis Machado * NEWS (New commands): Mention flash-erase. (New MI commands): Mention target-flash-erase. * mi/mi-cmds.c (mi_cmd_target_flash_erase): Add target-flash-erase MI command. * mi/mi-cmds.h (mi_cmd_target_flash_erase): New declaration. * mi/mi-main.c (mi_cmd_target_flash_erase): New function. * target.c (flash_erase_command): New function. (initialize_targets): Add new flash-erase command. * target.h (flash_erase_command): New declaration. 2017-01-20 Joel Brobecker * nat/linux-ptrace.c: Only include if HAVE_SYS_PROCFS_H is defined. 2017-01-18 Alan Hayward * remote.c (struct cached_reg): Change data into a pointer. * (stop_reply_dtr): Free data pointers before deleting vector. (process_stop_reply): Likewise. (remote_parse_stop_reply): Allocate space for data 2017-01-18 Alan Hayward * amd64-tdep.c (amd64_pseudo_register_read_value): remove MAX_REGISTER_SIZE. (amd64_pseudo_register_read_value): Likewise. * remote.c (fetch_register_using_p): Remove MAX_REGISTER_SIZE. (store_register_using_P): Likewise. * regcache.c (regcache_xfer_part): Likewise. 2017-01-16 Ivo Raisr Split real and pseudo registers. * sparc-tdep.h (SPARC_CORE_REGISTERS): New macro. (sparc32_pseudo_regnum): New enum. * sparc64-tdep.h (sparc64_pseudo_regnum): New enum. * sparc-tdep.c (SPARC32_FPU_REGISTERS): New macro. (SPARC32_CP0_REGISTERS): New macro. (sparc32_pseudo_register_name): New function. (sparc32_register_name): Use sparc32_pseudo_register_name. (sparc32_pseudo_register_type): New function. (sparc32_register_type): Use sparc32_pseudo_register_type. (sparc32_pseudo_register_read, sparc32_pseudo_register_write): Handle pseudo register numbers. * sparc64-tdep.c SPARC64_FPU_REGISTERS): New macro. (SPARC64_CP0_REGISTERS): New macro. (sparc64_pseudo_register_name): New function. (sparc64_register_name): Use sparc64_pseudo_register_name. (sparc64_pseudo_register_type): New function. (sparc64_register_type): Use sparc64_pseudo_register_type. (sparc64_pseudo_register_read, sparc64_pseudo_register_write): Handle pseudo register numbers. (sparc64_store_floating_fields, sparc64_extract_floating_fields, sparc64_store_arguments): Handle pseudo register numbers. 2017-01-13 Yao Qi * remote.c (REMOTE_DEBUG_MAX_CHAR): New macro. (putpkt_binary): Print only REMOTE_DEBUG_MAX_CHAR chars in debug output. (getpkt_or_notif_sane_1): Likewise. 2017-01-13 Yao Qi * Makefile.in (checker-headers): Use CXX and CXX_DIALET instead of CC. Pass "-x c++-header" instead of "-x c". 2017-01-12 Simon Marchi * remote.c (remote_can_async_p): Update comment. 2017-01-12 Simon Marchi * linux-nat.c (linux_nat_can_async_p): Update comment. 2017-01-12 Simon Marchi * serial.c (serial_open): Forget about "pc" and "lpt" serial interface. 2017-01-11 Simon Marchi * cli/cli-decode.c (lookup_cmd_1): Fix typo in comment. 2017-01-10 Tom Tromey * python/py-type.c (typy_legacy_template_argument): Update. * cp-support.h (struct demangle_parse_info) (demangle_parse_info, ~demangle_parse_info): Declare new members. (cp_demangled_name_to_comp): Return unique_ptr. (cp_demangled_name_parse_free) (make_cleanup_cp_demangled_name_parse_free) (cp_new_demangle_parse_info): Remove. * cp-support.c (do_demangled_name_parse_free_cleanup) (make_cleanup_cp_demangled_name_parse_free): Remove. (inspect_type, cp_canonicalize_string_full) (cp_canonicalize_string): Update. (mangled_name_to_comp): Change return type. (cp_class_name_from_physname, method_name_from_physname) (cp_func_name, cp_remove_params): Update. * cp-name-parser.y (demangle_parse_info): New constructor, from cp_new_demangle_parse_info. (~demangle_parse_info): New destructor, from cp_demangled_name_parse_free. (cp_merge_demangle_parse_infos): Update. (cp_demangled_name_to_comp): Change return type. 2017-01-10 Tom Tromey * top.c (prevent_dont_repeat): Change return type. * python/python.c (execute_gdb_command): Use std::string. Update. * guile/guile.c (gdbscm_execute_gdb_command): Update. * command.h (prevent_dont_repeat): Change return type. * breakpoint.c (bpstat_do_actions_1): Update. 2017-01-10 Tom Tromey * value.h (scoped_value_mark::~scoped_value_mark): Call free_to_mark. (scoped_value_mark::free_to_mark): New method. * dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Use scoped_value_mark. 2017-01-10 Tom Tromey * python/py-value.c (valpy_dereference, valpy_referenced_value) (valpy_reference_value, valpy_const_value, valpy_get_address) (valpy_get_dynamic_type, valpy_lazy_string, valpy_do_cast) (valpy_getitem, valpy_call, valpy_binop_throw, valpy_negative) (valpy_absolute, valpy_richcompare_throw): Use scoped_value_mark. * dwarf2loc.c (dwarf2_loc_desc_get_symbol_read_needs): Use scoped_value_mark. * dwarf2-frame.c (execute_stack_op): Use scoped_value_mark. * value.h (scoped_value_mark): New class. 2017-01-10 Tom Tromey * dwarf2read.c (dwarf2_build_psymtabs): Use psymtab_discarder. * psympriv.h (make_cleanup_discard_psymtabs): Don't declare. * psymtab.c (discard_psymtabs_upto): Remove. (make_cleanup_discard_psymtabs): Remove. (struct psymtab_state): Remove. 2017-01-10 Tom Tromey * record-full.c (record_full_save_cleanups): Remove. (record_full_save): Use gdb::unlinker. * gcore.c (do_bfd_delete_cleanup): Remove. (gcore_command): Use gdb::unlinker, unique_xmalloc_ptr. Remove cleanups. * dwarf2read.c (unlink_if_set): Remove. (write_psymtabs_to_index): Use gdb::unlinker. * common/gdb_unlinker.h: New file. 2017-01-10 Tom Tromey * windows-tdep.c (windows_xfer_shared_library): Update. * windows-nat.c (windows_make_so): Update. * utils.h (make_cleanup_bfd_unref): Remove. * utils.c (do_bfd_close_cleanup, make_cleanup_bfd_unref): Remove. * symfile.h (symfile_bfd_open) (find_separate_debug_file_in_section): Return gdb_bfd_ref_ptr. * symfile.c (read_symbols, symbol_file_add) (separate_debug_file_exists): Update. (symfile_bfd_open): Return gdb_bfd_ref_ptr. (generic_load, reread_symbols): Update. * symfile-mem.c (symbol_file_add_from_memory): Update. * spu-linux-nat.c (spu_bfd_open): Return gdb_bfd_ref_ptr. (spu_symbol_file_add_from_memory): Update. * solist.h (struct target_so_ops) : Return gdb_bfd_ref_ptr. (solib_bfd_fopen, solib_bfd_open): Return gdb_bfd_ref_ptr. * solib.c (solib_bfd_fopen, solib_bfd_open): Return gdb_bfd_ref_ptr. (solib_map_sections, reload_shared_libraries_1): Update. * solib-svr4.c (enable_break): Update. * solib-spu.c (spu_bfd_fopen): Return gdb_bfd_ref_ptr. * solib-frv.c (enable_break2): Update. * solib-dsbt.c (enable_break): Update. * solib-darwin.c (gdb_bfd_mach_o_fat_extract): Return gdb_bfd_ref_ptr. (darwin_solib_get_all_image_info_addr_at_init): Update. (darwin_bfd_open): Return gdb_bfd_ref_ptr. * solib-aix.c (solib_aix_bfd_open): Return gdb_bfd_ref_ptr. * record-full.c (record_full_save): Update. * python/py-objfile.c (objfpy_add_separate_debug_file): Update. * procfs.c (insert_dbx_link_bpt_in_file): Update. * minidebug.c (find_separate_debug_file_in_section): Return gdb_bfd_ref_ptr. * machoread.c (macho_add_oso_symfile): Change abfd to gdb_bfd_ref_ptr. (macho_symfile_read_all_oso): Update. (macho_check_dsym): Return gdb_bfd_ref_ptr. (macho_symfile_read): Update. * jit.c (bfd_open_from_target_memory): Return gdb_bfd_ref_ptr. (jit_bfd_try_read_symtab): Update. * gdb_bfd.h (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr) (gdb_bfd_openw, gdb_bfd_openr_iovec) (gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return gdb_bfd_ref_ptr. (gdb_bfd_ref_policy): New struct. (gdb_bfd_ref_ptr): New typedef. * gdb_bfd.c (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr) (gdb_bfd_openw, gdb_bfd_openr_iovec) (gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return gdb_bfd_ref_ptr. * gcore.h (create_gcore_bfd): Return gdb_bfd_ref_ptr. * gcore.c (create_gcore_bfd): Return gdb_bfd_ref_ptr. (gcore_command): Update. * exec.c (exec_file_attach): Update. * elfread.c (elf_symfile_read): Update. * dwarf2read.c (dwarf2_get_dwz_file): Update. (try_open_dwop_file, open_dwo_file): Return gdb_bfd_ref_ptr. (open_and_init_dwo_file): Update. (open_dwp_file): Return gdb_bfd_ref_ptr. (open_and_init_dwp_file): Update. * corelow.c (core_open): Update. * compile/compile-object-load.c (compile_object_load): Update. * common/gdb_ref_ptr.h (ref_ptr::operator->): New operator. * coffread.c (coff_symfile_read): Update. * cli/cli-dump.c (bfd_openr_or_error, bfd_openw_or_error): Return gdb_bfd_ref_ptr. Rename. (dump_bfd_file, restore_command): Update. * build-id.h (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr. * build-id.c (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr. (find_separate_debug_file_by_buildid): Update. 2017-01-10 Tom Tromey * common/gdb_ref_ptr.h: New file. * python/py-ref.h (struct gdbpy_ref_policy): New. (gdbpy_ref): Now a typedef. 2017-01-10 Tom Tromey * utils.h (make_cleanup_htab_delete): Don't declare. * utils.c (do_htab_delete_cleanup, make_cleanup_htab_delete): Remove. * linespec.c (decode_compound_collector): Add constructor, destructor. (lookup_prefix_sym): Remove cleanup. (symtab_collector): Add constructor, destructor. (collect_symtabs_from_filename): Remove cleanup. * disasm.c (do_mixed_source_and_assembly): Use htab_up. * compile/compile-c-symbols.c (generate_c_for_variable_locations): Use htab_up. * gnu-v3-abi.c (gnuv3_print_vtable): Use htab_up. * dwarf2read.c (dw2_expand_symtabs_matching) (dw2_map_symbol_filenames, dwarf_decode_macros) (write_psymtabs_to_index): Use htab_up. * dwarf2loc.c (func_verify_no_selftailcall) (call_site_find_chain_1, func_verify_no_selftailcall) (chain_candidate, call_site_find_chain_1): Use std::unordered_set, std::vector, gdb::unique_xmalloc_ptr. (call_sitep): Remove typedef. (dwarf2_locexpr_baton_eval): Remove unused variable. 2017-01-10 Tom Tromey * python/python-internal.h (make_cleanup_py_decref) (make_cleanup_py_xdecref): Don't declare. * python/py-utils.c (py_decref, make_cleanup_py_decref) (py_xdecref, make_cleanup_py_xdecref): Remove. 2017-01-10 Tom Tromey * python/py-framefilter.c (py_mi_print_variables): Use gdbpy_ref. (py_print_locals, enumerate_locals, py_print_args): Use gdbpy_ref. 2017-01-10 Tom Tromey * python/py-framefilter.c (enumerate_args): Use gdbpy_ref. 2017-01-10 Tom Tromey * python/py-utils.c (unicode_to_encoded_string) (python_string_to_target_string) (python_string_to_target_python_string) (python_string_to_host_string, gdbpy_obj_to_string) (get_addr_from_python): Use gdbpy_ref. 2017-01-10 Tom Tromey * python/py-unwind.c (pyuw_object_attribute_to_pointer): Use gdbpy_ref. 2017-01-10 Tom Tromey * python/python.c (eval_python_command, gdbpy_decode_line) (gdbpy_run_events, gdbpy_start_type_printers) (gdbpy_apply_type_printers): Use gdbpy_ref. 2017-01-10 Tom Tromey * python/py-param.c (get_doc_string, compute_enum_values): Use gdbpy_ref. 2017-01-10 Tom Tromey * python/py-inferior.c (find_thread_object, build_inferior_list): Use gdbpy_ref. 2017-01-10 Tom Tromey * python/py-framefilter.c (py_print_frame): Use gdbpy_ref. 2017-01-10 Tom Tromey * python/py-finishbreakpoint.c (bpfinishpy_out_of_scope): Use gdbpy_ref. 2017-01-10 Tom Tromey * python/py-cmd.c (cmdpy_completer_helper): Use gdbpy_ref. Remove extra incref. (cmdpy_completer_handle_brkchars, cmdpy_completer, cmdpy_init): Use gdbpy_ref. 2017-01-10 Tom Tromey * python/py-breakpoint.c (gdbpy_breakpoint_cond_says_stop): Use gdbpy_ref. 2017-01-10 Tom Tromey * python/py-arch.c (archpy_disassemble): Use gdbpy_ref. Don't decref results of PyArg_ParseTupleAndKeywords. 2017-01-10 Tom Tromey * python/python.c (python_run_simple_file): Use unique_xmalloc_ptr, gdbpy_ref. 2017-01-10 Tom Tromey * python/py-prettyprint.c (print_stack_unless_memory_error) (print_string_repr, print_children): Use gdbpy_ref. (dummy_python_frame): New class. (dummy_python_frame::dummy_python_frame): Rename from push_dummy_python_frame. (py_restore_tstate): Remove. 2017-01-10 Tom Tromey * python/py-framefilter.c (py_print_frame): Use gdbpy_ref. 2017-01-10 Tom Tromey * python/python.c (ensure_python_env, restore_python_env): Remove. * python/python-internal.h (ensure_python_env): Don't declare. * varobj.h (varobj_ensure_python_env): Don't declare. * varobj.c (varobj_ensure_python_env): Remove. 2017-01-10 Tom Tromey * varobj.c (varobj_value_get_print_value): Use gdbpy_enter_varobj. 2017-01-10 Tom Tromey * python/py-prettyprint.c (print_string_repr, print_children): Update. * python/py-lazy-string.c (gdbpy_extract_lazy_string): Change type of "encoding". * varobj.c (varobj_value_get_print_value): Update. * python/python-internal.h (gdbpy_extract_lazy_string): Update. 2017-01-10 Tom Tromey * varobj.c (varobj_get_display_hint) (dynamic_varobj_has_child_method, install_new_value_visualizer) (varobj_set_visualizer, free_variable): Use gdbpy_enter_varobj. 2017-01-10 Tom Tromey * python/python.c (python_command): Use gdbpy_enter, gdbpy_ref. (do_finish_initialization): New function. Use gdbpy_ref. (gdbpy_finish_initialization): Use gdbpy_enter. Call do_finish_initialization. 2017-01-10 Tom Tromey * python/py-param.c (get_set_value, get_show_value): Use gdbpy_enter, gdbpy_ref. 2017-01-10 Tom Tromey * python/py-function.c (fnpy_call): Use gdbpy_enter, gdbpy_ref. 2017-01-10 Tom Tromey * python/py-cmd.c (cmdpy_function): Use gdbpy_enter, gdbpy_ref. 2017-01-10 Tom Tromey * python/py-varobj.c (py_varobj_iter_dtor, py_varobj_iter_next): Use gdbpy_enter_varobj. 2017-01-10 Tom Tromey * varobj.c (gdbpy_enter_varobj): New constructor. * python/python-internal.h (gdbpy_enter_varobj): New class. * python/py-varobj.c (py_varobj_get_iterator): Use gdbpy_enter_varobj. 2017-01-10 Tom Tromey * python/py-xmethods.c (gdbpy_get_xmethod_result_type): Use gdbpy_enter, gdbpy_ref, unique_xmalloc_ptr. (gdbpy_invoke_xmethod): Use gdbpy_ref, gdbpy_enter. (gdbpy_get_xmethod_arg_types): Use gdbpy_ref, unique_xmalloc_ptr. (gdbpy_get_xmethod_arg_types): Use gdbpy_ref, gdbpy_enter. 2017-01-10 Tom Tromey * python/py-xmethods.c (invoke_match_method): Use gdbpy_ref. 2017-01-10 Tom Tromey * python/py-xmethods.c (gdbpy_get_matching_xmethod_workers): use gdbpy_enter, gdbpy_ref. 2017-01-10 Tom Tromey * python/python.c (python_interactive_command): Use gdbpy_enter. 2017-01-10 Tom Tromey * python/python.c (gdbpy_before_prompt_hook): Use gdbpy_enter, gdbpy_ref. 2017-01-10 Tom Tromey * python/py-prettyprint.c (gdbpy_apply_val_pretty_printer): Use gdbpy_enter, gdbpy_ref, unique_xmalloc_ptr. 2017-01-10 Tom Tromey * utils.h (htab_deleter): New struct. (htab_up): New typedef. * python/py-framefilter.c (gdbpy_apply_frame_filter): Use gdbpy_enter, gdbpy_ref, htab_up. 2017-01-10 Tom Tromey * python/py-unwind.c (pending_frame_invalidate): Remove. (pyuw_sniffer): Use gdbpy_enter and gdbpy_ref. 2017-01-10 Tom Tromey * python/py-xmethods.c (gdbpy_free_xmethod_worker_data) (gdbpy_clone_xmethod_worker_data): Use gdbpy_enter. 2017-01-10 Tom Tromey * python/py-type.c (save_objfile_types): Use gdbpy_enter. 2017-01-10 Tom Tromey * python/python.c (gdbpy_eval_from_control_command) (gdbpy_source_script, gdbpy_run_events) (gdbpy_source_objfile_script, gdbpy_execute_objfile_script) (gdbpy_free_type_printers, gdbpy_finish_initialization): Use gdbpy_enter. 2017-01-10 Tom Tromey * python/py-progspace.c (py_free_pspace): Use gdbpy_enter. 2017-01-10 Tom Tromey * python/py-objfile.c (py_free_objfile): Use gdbpy_enter. 2017-01-10 Tom Tromey * python/py-inferior.c (python_on_normal_stop, python_on_resume) (python_on_inferior_call_pre, python_on_inferior_call_post) (python_on_memory_change, python_on_register_change) (python_inferior_exit, python_new_objfile, add_thread_object) (delete_thread_object, py_free_inferior): Use gdbpy_enter. 2017-01-10 Tom Tromey * python/py-finishbreakpoint.c (bpfinishpy_handle_stop) (bpfinishpy_handle_exit): Use gdbpy_enter. 2017-01-10 Tom Tromey * python/py-cmd.c (cmdpy_destroyer) (cmdpy_completer_handle_brkchars, cmdpy_completer): Use gdbpy_enter. 2017-01-10 Tom Tromey * python/py-breakpoint.c (gdbpy_breakpoint_cond_says_stop): Use gdbpy_enter. (gdbpy_breakpoint_has_cond): Likewise. 2017-01-10 Tom Tromey * python/python.c (gdbpy_enter): New constructor. (~gdbpy_enter): New destructor. (restore_python_env, ensure_python_env): Rewrite. * python/python-internal.h (gdbpy_enter): New class. 2017-01-10 Tom Tromey * python/py-symbol.c (gdbpy_lookup_symbol): Use gdbpy_ref. 2017-01-10 Tom Tromey * python/py-value.c (value_has_field, get_field_flag) (get_field_type, valpy_getitem, convert_value_from_python): Use gdbpy_ref. 2017-01-10 Tom Tromey * python/python.c (gdbpy_progspaces, gdbpy_objfiles): Use gdbpy_ref. 2017-01-10 Tom Tromey * python/py-prettyprint.c (search_pp_list) (find_pretty_printer_from_objfiles) (find_pretty_printer_from_progspace) (find_pretty_printer_from_gdb, find_pretty_printer) (gdbpy_get_display_hint, gdbpy_get_varobj_pretty_printer): Use gdbpy_ref. 2017-01-10 Tom Tromey * python/py-param.c (call_doc_function): Use gdbpy_ref. 2017-01-10 Tom Tromey * python/py-linetable.c (build_line_table_tuple_from_pcs) (ltpy_get_all_source_lines): Use gdbpy_ref. 2017-01-10 Tom Tromey * python/py-framefilter.c (extract_sym, extract_value) (get_py_iter_from_func, bootstrap_python_frame_filters): Use gdbpy_ref. 2017-01-10 Tom Tromey * python/py-breakpoint.c (gdbpy_breakpoints): Use gdbpy_ref. 2017-01-10 Tom Tromey * python/py-inferior.c (gdbpy_inferiors): Use gdbpy_ref. 2017-01-10 Tom Tromey * python/py-function.c (convert_values_to_python, fnpy_init): Use gdbpy_ref. 2017-01-10 Tom Tromey * python/py-cmd.c (gdbpy_string_to_argv): Use gdbpy_ref. 2017-01-10 Tom Tromey * python/py-type.c (convert_field, make_fielditem, typy_fields) (typy_range): Use gdbpy_ref. 2017-01-10 Tom Tromey * python/py-threadevent.c (create_thread_event_object): Use gdbpy_ref. * python/py-stopevent.c (create_stop_event_object): Simplify. (emit_stop_event): Use gdbpy_ref. * python/py-signalevent.c (create_signal_event_object): Use gdbpy_ref. * python/py-newobjfileevent.c (create_new_objfile_event_object) (emit_new_objfile_event, create_clear_objfiles_event_object) (emit_clear_objfiles_event): Use gdbpy_ref. * python/py-infevents.c (create_inferior_call_event_object) (create_register_changed_event_object) (create_memory_changed_event_object, emit_inferior_call_event) (emit_memory_changed_event, emit_register_changed_event): Use gdbpy_ref. * python/py-exitedevent.c (create_exited_event_object) (emit_exited_event): Use gdbpy_ref. * python/py-event.h (evpy_emit_event): Remove CPYCHECKER_STEALS_REFERENCE_TO_ARG annotation. * python/py-event.c (evpy_emit_event): Use gdbpy_ref. * python/py-continueevent.c (emit_continue_event): Use gdbpy_ref. * python/py-breakpoint.c (gdbpy_breakpoint_created) (gdbpy_breakpoint_deleted, gdbpy_breakpoint_modified): Use gdbpy_ref. * python/py-bpevent.c (create_breakpoint_event_object): Use gdbpy_ref. 2017-01-10 Tom Tromey * python/py-ref.h: New file. 2017-01-10 Simon Marchi * cli-out.c (cli_ui_out::do_redirect): Change return type to void. * cli-out.h (cli_ui_out::do_redirect): Likewise. * mi/mi-out.c (mi_ui_out::do_redirect): Likewise. * mi/mi-out.h (mi_ui_out::do_redirect): Likewise. * ui-out.c (ui_out::redirect): Likewise. * ui-out.h (ui_out::redirect, ui_out::do_redirect): Likewise. * cli/cli-logging.c (set_logging_redirect): Update call site of ui_out::redirect. (handle_redirections): Likewise. * scm-ports.c (ioscm_with_output_to_port_worker): Likewise. * top.c (execute_command_to_string): Likewise. * utils.c (do_ui_out_redirect_pop): Likewise. 2017-01-10 Simon Marchi * stack.c (_initialize_stack): Update "frame" command help message. 2017-01-08 Iain Buclaw * d-exp.y (CastExpression): Emit UNOP_CAST_TYPE. 2017-01-06 Yao Qi * x86-linux-nat.h: Include gdb_proc_service.h. 2017-01-06 Yao Qi * ser-base.h: Include serial.h. 2017-01-06 Yao Qi * ppc-linux-tdep.h: Include ppc-tdep.h. 2017-01-06 Yao Qi * nat/amd64-linux-siginfo.h: Include signal.h. 2017-01-06 Yao Qi * nat/aarch64-linux-hw-point.h: Include break-common.h. 2017-01-06 Yao Qi * mi/mi-parse.h: Include mi-cmds.h. 2017-01-06 Yao Qi * inf-loop.c: Don't include "target.h". * inf-loop.h: Include it here. 2017-01-06 Yao Qi * dfp.h: Include "dboulest.h" and "expression.h". 2017-01-06 Yao Qi * ax-gdb.h: Include "ax.h". 2017-01-06 Yao Qi * Makefile.in (HFILES_NO_SRCDIR): Replace gdb_ptrace.h with nat/gdb_ptrace.h. 2017-01-05 Yao Qi * mips-fbsd-tdep.c (mips_fbsd_sigframe_init): Move && to new line. (mips64_fbsd_sigframe_init): Likewise. 2017-01-04 John Baldwin * mips-fbsd-tdep.c (_initialize_mips_fbsd_tdep): Use GDB_OSABI_FREEBSD instead of GDB_OSABI_FREEBSD_ELF. 2017-01-04 John Baldwin * Makefile.in (ALLDEPFILES): Add mips-fbsd-nat.c. * NEWS: Mention new FreeBSD/mips native configuration. * config/mips/fbsd.mh: New file. * configure.host: Add mips*-*-freebsd*. * mips-fbsd-nat.c: New file. 2017-01-04 John Baldwin * Makefile.in (ALL_TARGET_OBS): Add mips-fbsd-tdep.o. (ALLDEPFILES): Add mips-fbsd-tdep.c. * NEWS: Mention new FreeBSD/mips target. * configure.tgt: Add mips*-*-freebsd*. * mips-fbsd-tdep.c: New file. * mips-fbsd-tdep.h: New file. 2017-01-04 Yao Qi * dwarf2loc.c (write_pieced_value): Don't use VALUE_FRAME_ID (to), use c->frame_id when the piece location is DWARF_VALUE_REGISTER. 2017-01-01 Joel Brobecker Update copyright year range in all GDB files. 2017-01-01 Joel Brobecker * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2016. For older changes see ChangeLog-2016. Local Variables: mode: change-log left-margin: 8 fill-column: 74 version-control: never coding: utf-8 End: