\input texinfo @c -*- texinfo -*- @setfilename gdbint.info @include gdb-cfg.texi @dircategory Software development @direntry * Gdb-Internals: (gdbint). The GNU debugger's internals. @end direntry @ifinfo This file documents the internals of the GNU debugger @value{GDBN}. Copyright 1990,1991,1992,1993,1994,1996,1998,1999,2000,2001,2002,2003,2004 Free Software Foundation, Inc. Contributed by Cygnus Solutions. Written by John Gilmore. Second Edition by Stan Shebs. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.1 or any later version published by the Free Software Foundation; with no Invariant Sections, with no Front-Cover Texts, and with no Back-Cover Texts. A copy of the license is included in the section entitled ``GNU Free Documentation License''. @end ifinfo @setchapternewpage off @settitle @value{GDBN} Internals @syncodeindex fn cp @syncodeindex vr cp @titlepage @title @value{GDBN} Internals @subtitle{A guide to the internals of the GNU debugger} @author John Gilmore @author Cygnus Solutions @author Second Edition: @author Stan Shebs @author Cygnus Solutions @page @tex \def\$#1${{#1}} % Kluge: collect RCS revision info without $...$ \xdef\manvers{\$Revision$} % For use in headers, footers too {\parskip=0pt \hfill Cygnus Solutions\par \hfill \manvers\par \hfill \TeX{}info \texinfoversion\par } @end tex @vskip 0pt plus 1filll Copyright @copyright{} 1990,1991,1992,1993,1994,1996,1998,1999,2000,2001, 2002, 2003, 2004 Free Software Foundation, Inc. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.1 or any later version published by the Free Software Foundation; with no Invariant Sections, with no Front-Cover Texts, and with no Back-Cover Texts. A copy of the license is included in the section entitled ``GNU Free Documentation License''. @end titlepage @contents @node Top @c Perhaps this should be the title of the document (but only for info, @c not for TeX). Existing GNU manuals seem inconsistent on this point. @top Scope of this Document This document documents the internals of the GNU debugger, @value{GDBN}. It includes description of @value{GDBN}'s key algorithms and operations, as well as the mechanisms that adapt @value{GDBN} to specific hosts and targets. @menu * Requirements:: * Overall Structure:: * Algorithms:: * User Interface:: * libgdb:: * Symbol Handling:: * Language Support:: * Host Definition:: * Target Architecture Definition:: * Target Vector Definition:: * Native Debugging:: * Support Libraries:: * Coding:: * Porting GDB:: * Versions and Branches:: * Releasing GDB:: * Testsuite:: * Hints:: * GDB Observers:: @value{GDBN} Currently available observers * GNU Free Documentation License:: The license for this documentation * Index:: @end menu @node Requirements @chapter Requirements @cindex requirements for @value{GDBN} Before diving into the internals, you should understand the formal requirements and other expectations for @value{GDBN}. Although some of these may seem obvious, there have been proposals for @value{GDBN} that have run counter to these requirements. First of all, @value{GDBN} is a debugger. It's not designed to be a front panel for embedded systems. It's not a text editor. It's not a shell. It's not a programming environment. @value{GDBN} is an interactive tool. Although a batch mode is available, @value{GDBN}'s primary role is to interact with a human programmer. @value{GDBN} should be responsive to the user. A programmer hot on the trail of a nasty bug, and operating under a looming deadline, is going to be very impatient of everything, including the response time to debugger commands. @value{GDBN} should be relatively permissive, such as for expressions. While the compiler should be picky (or have the option to be made picky), since source code lives for a long time usually, the programmer doing debugging shouldn't be spending time figuring out to mollify the debugger. @value{GDBN} will be called upon to deal with really large programs. Executable sizes of 50 to 100 megabytes occur regularly, and we've heard reports of programs approaching 1 gigabyte in size. @value{GDBN} should be able to run everywhere. No other debugger is available for even half as many configurations as @value{GDBN} supports. @node Overall Structure @chapter Overall Structure @value{GDBN} consists of three major subsystems: user interface, symbol handling (the @dfn{symbol side}), and target system handling (the @dfn{target side}). The user interface consists of several actual interfaces, plus supporting code. The symbol side consists of object file readers, debugging info interpreters, symbol table management, source language expression parsing, type and value printing. The target side consists of execution control, stack frame analysis, and physical target manipulation. The target side/symbol side division is not formal, and there are a number of exceptions. For instance, core file support involves symbolic elements (the basic core file reader is in BFD) and target elements (it supplies the contents of memory and the values of registers). Instead, this division is useful for understanding how the minor subsystems should fit together. @section The Symbol Side The symbolic side of @value{GDBN} can be thought of as ``everything you can do in @value{GDBN} without having a live program running''. For instance, you can look at the types of variables, and evaluate many kinds of expressions. @section The Target Side The target side of @value{GDBN} is the ``bits and bytes manipulator''. Although it may make reference to symbolic info here and there, most of the target side will run with only a stripped executable available---or even no executable at all, in remote debugging cases. Operations such as disassembly, stack frame crawls, and register display, are able to work with no symbolic info at all. In some cases, such as disassembly, @value{GDBN} will use symbolic info to present addresses relative to symbols rather than as raw numbers, but it will work either way. @section Configurations @cindex host @cindex target @dfn{Host} refers to attributes of the system where @value{GDBN} runs. @dfn{Target} refers to the system where the program being debugged executes. In most cases they are the same machine, in which case a third type of @dfn{Native} attributes come into play. Defines and include files needed to build on the host are host support. Examples are tty support, system defined types, host byte order, host float format. Defines and information needed to handle the target format are target dependent. Examples are the stack frame format, instruction set, breakpoint instruction, registers, and how to set up and tear down the stack to call a function. Information that is only needed when the host and target are the same, is native dependent. One example is Unix child process support; if the host and target are not the same, doing a fork to start the target process is a bad idea. The various macros needed for finding the registers in the @code{upage}, running @code{ptrace}, and such are all in the native-dependent files. Another example of native-dependent code is support for features that are really part of the target environment, but which require @code{#include} files that are only available on the host system. Core file handling and @code{setjmp} handling are two common cases. When you want to make @value{GDBN} work ``native'' on a particular machine, you have to include all three kinds of information. @node Algorithms @chapter Algorithms @cindex algorithms @value{GDBN} uses a number of debugging-specific algorithms. They are often not very complicated, but get lost in the thicket of special cases and real-world issues. This chapter describes the basic algorithms and mentions some of the specific target definitions that they use. @section Frames @cindex frame @cindex call stack frame A frame is a construct that @value{GDBN} uses to keep track of calling and called functions. @findex create_new_frame @vindex FRAME_FP @code{FRAME_FP} in the machine description has no meaning to the machine-independent part of @value{GDBN}, except that it is used when setting up a new frame from scratch, as follows: @smallexample create_new_frame (read_register (DEPRECATED_FP_REGNUM), read_pc ())); @end smallexample @cindex frame pointer register Other than that, all the meaning imparted to @code{DEPRECATED_FP_REGNUM} is imparted by the machine-dependent code. So, @code{DEPRECATED_FP_REGNUM} can have any value that is convenient for the code that creates new frames. (@code{create_new_frame} calls @code{DEPRECATED_INIT_EXTRA_FRAME_INFO} if it is defined; that is where you should use the @code{DEPRECATED_FP_REGNUM} value, if your frames are nonstandard.) @cindex frame chain Given a @value{GDBN} frame, define @code{DEPRECATED_FRAME_CHAIN} to determine the address of the calling function's frame. This will be used to create a new @value{GDBN} frame struct, and then @code{DEPRECATED_INIT_EXTRA_FRAME_INFO} and @code{DEPRECATED_INIT_FRAME_PC} will be called for the new frame. @section Breakpoint Handling @cindex breakpoints In general, a breakpoint is a user-designated location in the program where the user wants to regain control if program execution ever reaches that location. There are two main ways to implement breakpoints; either as ``hardware'' breakpoints or as ``software'' breakpoints. @cindex hardware breakpoints @cindex program counter Hardware breakpoints are sometimes available as a builtin debugging features with some chips. Typically these work by having dedicated register into which the breakpoint address may be stored. If the PC (shorthand for @dfn{program counter}) ever matches a value in a breakpoint registers, the CPU raises an exception and reports it to @value{GDBN}. Another possibility is when an emulator is in use; many emulators include circuitry that watches the address lines coming out from the processor, and force it to stop if the address matches a breakpoint's address. A third possibility is that the target already has the ability to do breakpoints somehow; for instance, a ROM monitor may do its own software breakpoints. So although these are not literally ``hardware breakpoints'', from @value{GDBN}'s point of view they work the same; @value{GDBN} need not do anything more than set the breakpoint and wait for something to happen. Since they depend on hardware resources, hardware breakpoints may be limited in number; when the user asks for more, @value{GDBN} will start trying to set software breakpoints. (On some architectures, notably the 32-bit x86 platforms, @value{GDBN} cannot always know whether there's enough hardware resources to insert all the hardware breakpoints and watchpoints. On those platforms, @value{GDBN} prints an error message only when the program being debugged is continued.) @cindex software breakpoints Software breakpoints require @value{GDBN} to do somewhat more work. The basic theory is that @value{GDBN} will replace a program instruction with a trap, illegal divide, or some other instruction that will cause an exception, and then when it's encountered, @value{GDBN} will take the exception and stop the program. When the user says to continue, @value{GDBN} will restore the original instruction, single-step, re-insert the trap, and continue on. Since it literally overwrites the program being tested, the program area must be writable, so this technique won't work on programs in ROM. It can also distort the behavior of programs that examine themselves, although such a situation would be highly unusual. Also, the software breakpoint instruction should be the smallest size of instruction, so it doesn't overwrite an instruction that might be a jump target, and cause disaster when the program jumps into the middle of the breakpoint instruction. (Strictly speaking, the breakpoint must be no larger than the smallest interval between instructions that may be jump targets; perhaps there is an architecture where only even-numbered instructions may jumped to.) Note that it's possible for an instruction set not to have any instructions usable for a software breakpoint, although in practice only the ARC has failed to define such an instruction. @findex BREAKPOINT The basic definition of the software breakpoint is the macro @code{BREAKPOINT}. Basic breakpoint object handling is in @file{breakpoint.c}. However, much of the interesting breakpoint action is in @file{infrun.c}. @section Single Stepping @section Signal Handling @section Thread Handling @section Inferior Function Calls @section Longjmp Support @cindex @code{longjmp} debugging @value{GDBN} has support for figuring out that the target is doing a @code{longjmp} and for stopping at the target of the jump, if we are stepping. This is done with a few specialized internal breakpoints, which are visible in the output of the @samp{maint info breakpoint} command. @findex GET_LONGJMP_TARGET To make this work, you need to define a macro called @code{GET_LONGJMP_TARGET}, which will examine the @code{jmp_buf} structure and extract the longjmp target address. Since @code{jmp_buf} is target specific, you will need to define it in the appropriate @file{tm-@var{target}.h} file. Look in @file{tm-sun4os4.h} and @file{sparc-tdep.c} for examples of how to do this. @section Watchpoints @cindex watchpoints Watchpoints are a special kind of breakpoints (@pxref{Algorithms, breakpoints}) which break when data is accessed rather than when some instruction is executed. When you have data which changes without your knowing what code does that, watchpoints are the silver bullet to hunt down and kill such bugs. @cindex hardware watchpoints @cindex software watchpoints Watchpoints can be either hardware-assisted or not; the latter type is known as ``software watchpoints.'' @value{GDBN} always uses hardware-assisted watchpoints if they are available, and falls back on software watchpoints otherwise. Typical situations where @value{GDBN} will use software watchpoints are: @itemize @bullet @item The watched memory region is too large for the underlying hardware watchpoint support. For example, each x86 debug register can watch up to 4 bytes of memory, so trying to watch data structures whose size is more than 16 bytes will cause @value{GDBN} to use software watchpoints. @item The value of the expression to be watched depends on data held in registers (as opposed to memory). @item Too many different watchpoints requested. (On some architectures, this situation is impossible to detect until the debugged program is resumed.) Note that x86 debug registers are used both for hardware breakpoints and for watchpoints, so setting too many hardware breakpoints might cause watchpoint insertion to fail. @item No hardware-assisted watchpoints provided by the target implementation. @end itemize Software watchpoints are very slow, since @value{GDBN} needs to single-step the program being debugged and test the value of the watched expression(s) after each instruction. The rest of this section is mostly irrelevant for software watchpoints. When the inferior stops, @value{GDBN} tries to establish, among other possible reasons, whether it stopped due to a watchpoint being hit. For a data-write watchpoint, it does so by evaluating, for each watchpoint, the expression whose value is being watched, and testing whether the watched value has changed. For data-read and data-access watchpoints, @value{GDBN} needs the target to supply a primitive that returns the address of the data that was accessed or read (see the description of @code{target_stopped_data_address} below): if this primitive returns a valid address, @value{GDBN} infers that a watchpoint triggered if it watches an expression whose evaluation uses that address. @value{GDBN} uses several macros and primitives to support hardware watchpoints: @table @code @findex TARGET_HAS_HARDWARE_WATCHPOINTS @item TARGET_HAS_HARDWARE_WATCHPOINTS If defined, the target supports hardware watchpoints. @findex TARGET_CAN_USE_HARDWARE_WATCHPOINT @item TARGET_CAN_USE_HARDWARE_WATCHPOINT (@var{type}, @var{count}, @var{other}) Return the number of hardware watchpoints of type @var{type} that are possible to be set. The value is positive if @var{count} watchpoints of this type can be set, zero if setting watchpoints of this type is not supported, and negative if @var{count} is more than the maximum number of watchpoints of type @var{type} that can be set. @var{other} is non-zero if other types of watchpoints are currently enabled (there are architectures which cannot set watchpoints of different types at the same time). @findex TARGET_REGION_OK_FOR_HW_WATCHPOINT @item TARGET_REGION_OK_FOR_HW_WATCHPOINT (@var{addr}, @var{len}) Return non-zero if hardware watchpoints can be used to watch a region whose address is @var{addr} and whose length in bytes is @var{len}. @findex TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT @item TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT (@var{size}) Return non-zero if hardware watchpoints can be used to watch a region whose size is @var{size}. @value{GDBN} only uses this macro as a fall-back, in case @code{TARGET_REGION_OK_FOR_HW_WATCHPOINT} is not defined. @cindex insert or remove hardware watchpoint @findex target_insert_watchpoint @findex target_remove_watchpoint @item target_insert_watchpoint (@var{addr}, @var{len}, @var{type}) @itemx target_remove_watchpoint (@var{addr}, @var{len}, @var{type}) Insert or remove a hardware watchpoint starting at @var{addr}, for @var{len} bytes. @var{type} is the watchpoint type, one of the possible values of the enumerated data type @code{target_hw_bp_type}, defined by @file{breakpoint.h} as follows: @smallexample enum target_hw_bp_type @{ hw_write = 0, /* Common (write) HW watchpoint */ hw_read = 1, /* Read HW watchpoint */ hw_access = 2, /* Access (read or write) HW watchpoint */ hw_execute = 3 /* Execute HW breakpoint */ @}; @end smallexample @noindent These two macros should return 0 for success, non-zero for failure. @cindex insert or remove hardware breakpoint @findex target_remove_hw_breakpoint @findex target_insert_hw_breakpoint @item target_remove_hw_breakpoint (@var{addr}, @var{shadow}) @itemx target_insert_hw_breakpoint (@var{addr}, @var{shadow}) Insert or remove a hardware-assisted breakpoint at address @var{addr}. Returns zero for success, non-zero for failure. @var{shadow} is the real contents of the byte where the breakpoint has been inserted; it is generally not valid when hardware breakpoints are used, but since no other code touches these values, the implementations of the above two macros can use them for their internal purposes. @findex target_stopped_data_address @item target_stopped_data_address (@var{addr_p}) If the inferior has some watchpoint that triggered, place the address associated with the watchpoint at the location pointed to by @var{addr_p} and return non-zero. Otherwise, return zero. Note that this primitive is used by @value{GDBN} only on targets that support data-read or data-access type watchpoints, so targets that have support only for data-write watchpoints need not implement these primitives. @findex HAVE_STEPPABLE_WATCHPOINT @item HAVE_STEPPABLE_WATCHPOINT If defined to a non-zero value, it is not necessary to disable a watchpoint to step over it. @findex HAVE_NONSTEPPABLE_WATCHPOINT @item HAVE_NONSTEPPABLE_WATCHPOINT If defined to a non-zero value, @value{GDBN} should disable a watchpoint to step the inferior over it. @findex HAVE_CONTINUABLE_WATCHPOINT @item HAVE_CONTINUABLE_WATCHPOINT If defined to a non-zero value, it is possible to continue the inferior after a watchpoint has been hit. @findex CANNOT_STEP_HW_WATCHPOINTS @item CANNOT_STEP_HW_WATCHPOINTS If this is defined to a non-zero value, @value{GDBN} will remove all watchpoints before stepping the inferior. @findex STOPPED_BY_WATCHPOINT @item STOPPED_BY_WATCHPOINT (@var{wait_status}) Return non-zero if stopped by a watchpoint. @var{wait_status} is of the type @code{struct target_waitstatus}, defined by @file{target.h}. Normally, this macro is defined to invoke the function pointed to by the @code{to_stopped_by_watchpoint} member of the structure (of the type @code{target_ops}, defined on @file{target.h}) that describes the target-specific operations; @code{to_stopped_by_watchpoint} ignores the @var{wait_status} argument. @value{GDBN} does not require the non-zero value returned by @code{STOPPED_BY_WATCHPOINT} to be 100% correct, so if a target cannot determine for sure whether the inferior stopped due to a watchpoint, it could return non-zero ``just in case''. @end table @subsection x86 Watchpoints @cindex x86 debug registers @cindex watchpoints, on x86 The 32-bit Intel x86 (a.k.a.@: ia32) processors feature special debug registers designed to facilitate debugging. @value{GDBN} provides a generic library of functions that x86-based ports can use to implement support for watchpoints and hardware-assisted breakpoints. This subsection documents the x86 watchpoint facilities in @value{GDBN}. To use the generic x86 watchpoint support, a port should do the following: @itemize @bullet @findex I386_USE_GENERIC_WATCHPOINTS @item Define the macro @code{I386_USE_GENERIC_WATCHPOINTS} somewhere in the target-dependent headers. @item Include the @file{config/i386/nm-i386.h} header file @emph{after} defining @code{I386_USE_GENERIC_WATCHPOINTS}. @item Add @file{i386-nat.o} to the value of the Make variable @code{NATDEPFILES} (@pxref{Native Debugging, NATDEPFILES}) or @code{TDEPFILES} (@pxref{Target Architecture Definition, TDEPFILES}). @item Provide implementations for the @code{I386_DR_LOW_*} macros described below. Typically, each macro should call a target-specific function which does the real work. @end itemize The x86 watchpoint support works by maintaining mirror images of the debug registers. Values are copied between the mirror images and the real debug registers via a set of macros which each target needs to provide: @table @code @findex I386_DR_LOW_SET_CONTROL @item I386_DR_LOW_SET_CONTROL (@var{val}) Set the Debug Control (DR7) register to the value @var{val}. @findex I386_DR_LOW_SET_ADDR @item I386_DR_LOW_SET_ADDR (@var{idx}, @var{addr}) Put the address @var{addr} into the debug register number @var{idx}. @findex I386_DR_LOW_RESET_ADDR @item I386_DR_LOW_RESET_ADDR (@var{idx}) Reset (i.e.@: zero out) the address stored in the debug register number @var{idx}. @findex I386_DR_LOW_GET_STATUS @item I386_DR_LOW_GET_STATUS Return the value of the Debug Status (DR6) register. This value is used immediately after it is returned by @code{I386_DR_LOW_GET_STATUS}, so as to support per-thread status register values. @end table For each one of the 4 debug registers (whose indices are from 0 to 3) that store addresses, a reference count is maintained by @value{GDBN}, to allow sharing of debug registers by several watchpoints. This allows users to define several watchpoints that watch the same expression, but with different conditions and/or commands, without wasting debug registers which are in short supply. @value{GDBN} maintains the reference counts internally, targets don't have to do anything to use this feature. The x86 debug registers can each watch a region that is 1, 2, or 4 bytes long. The ia32 architecture requires that each watched region be appropriately aligned: 2-byte region on 2-byte boundary, 4-byte region on 4-byte boundary. However, the x86 watchpoint support in @value{GDBN} can watch unaligned regions and regions larger than 4 bytes (up to 16 bytes) by allocating several debug registers to watch a single region. This allocation of several registers per a watched region is also done automatically without target code intervention. The generic x86 watchpoint support provides the following API for the @value{GDBN}'s application code: @table @code @findex i386_region_ok_for_watchpoint @item i386_region_ok_for_watchpoint (@var{addr}, @var{len}) The macro @code{TARGET_REGION_OK_FOR_HW_WATCHPOINT} is set to call this function. It counts the number of debug registers required to watch a given region, and returns a non-zero value if that number is less than 4, the number of debug registers available to x86 processors. @findex i386_stopped_data_address @item i386_stopped_data_address (@var{addr_p}) The target function @code{target_stopped_data_address} is set to call this function. This function examines the breakpoint condition bits in the DR6 Debug Status register, as returned by the @code{I386_DR_LOW_GET_STATUS} macro, and returns the address associated with the first bit that is set in DR6. @findex i386_stopped_by_watchpoint @item i386_stopped_by_watchpoint (void) The macro @code{STOPPED_BY_WATCHPOINT} is set to call this function. The argument passed to @code{STOPPED_BY_WATCHPOINT} is ignored. This function examines the breakpoint condition bits in the DR6 Debug Status register, as returned by the @code{I386_DR_LOW_GET_STATUS} macro, and returns true if any bit is set. Otherwise, false is returned. @findex i386_insert_watchpoint @findex i386_remove_watchpoint @item i386_insert_watchpoint (@var{addr}, @var{len}, @var{type}) @itemx i386_remove_watchpoint (@var{addr}, @var{len}, @var{type}) Insert or remove a watchpoint. The macros @code{target_insert_watchpoint} and @code{target_remove_watchpoint} are set to call these functions. @code{i386_insert_watchpoint} first looks for a debug register which is already set to watch the same region for the same access types; if found, it just increments the reference count of that debug register, thus implementing debug register sharing between watchpoints. If no such register is found, the function looks for a vacant debug register, sets its mirrored value to @var{addr}, sets the mirrored value of DR7 Debug Control register as appropriate for the @var{len} and @var{type} parameters, and then passes the new values of the debug register and DR7 to the inferior by calling @code{I386_DR_LOW_SET_ADDR} and @code{I386_DR_LOW_SET_CONTROL}. If more than one debug register is required to cover the given region, the above process is repeated for each debug register. @code{i386_remove_watchpoint} does the opposite: it resets the address in the mirrored value of the debug register and its read/write and length bits in the mirrored value of DR7, then passes these new values to the inferior via @code{I386_DR_LOW_RESET_ADDR} and @code{I386_DR_LOW_SET_CONTROL}. If a register is shared by several watchpoints, each time a @code{i386_remove_watchpoint} is called, it decrements the reference count, and only calls @code{I386_DR_LOW_RESET_ADDR} and @code{I386_DR_LOW_SET_CONTROL} when the count goes to zero. @findex i386_insert_hw_breakpoint @findex i386_remove_hw_breakpoint @item i386_insert_hw_breakpoint (@var{addr}, @var{shadow} @itemx i386_remove_hw_breakpoint (@var{addr}, @var{shadow}) These functions insert and remove hardware-assisted breakpoints. The macros @code{target_insert_hw_breakpoint} and @code{target_remove_hw_breakpoint} are set to call these functions. These functions work like @code{i386_insert_watchpoint} and @code{i386_remove_watchpoint}, respectively, except that they set up the debug registers to watch instruction execution, and each hardware-assisted breakpoint always requires exactly one debug register. @findex i386_stopped_by_hwbp @item i386_stopped_by_hwbp (void) This function returns non-zero if the inferior has some watchpoint or hardware breakpoint that triggered. It works like @code{i386_stopped_data_address}, except that it doesn't record the address whose watchpoint triggered. @findex i386_cleanup_dregs @item i386_cleanup_dregs (void) This function clears all the reference counts, addresses, and control bits in the mirror images of the debug registers. It doesn't affect the actual debug registers in the inferior process. @end table @noindent @strong{Notes:} @enumerate 1 @item x86 processors support setting watchpoints on I/O reads or writes. However, since no target supports this (as of March 2001), and since @code{enum target_hw_bp_type} doesn't even have an enumeration for I/O watchpoints, this feature is not yet available to @value{GDBN} running on x86. @item x86 processors can enable watchpoints locally, for the current task only, or globally, for all the tasks. For each debug register, there's a bit in the DR7 Debug Control register that determines whether the associated address is watched locally or globally. The current implementation of x86 watchpoint support in @value{GDBN} always sets watchpoints to be locally enabled, since global watchpoints might interfere with the underlying OS and are probably unavailable in many platforms. @end enumerate @section Observing changes in @value{GDBN} internals @cindex observer pattern interface @cindex notifications about changes in internals In order to function properly, several modules need to be notified when some changes occur in the @value{GDBN} internals. Traditionally, these modules have relied on several paradigms, the most common ones being hooks and gdb-events. Unfortunately, none of these paradigms was versatile enough to become the standard notification mechanism in @value{GDBN}. The fact that they only supported one ``client'' was also a strong limitation. A new paradigm, based on the Observer pattern of the @cite{Design Patterns} book, has therefore been implemented. The goal was to provide a new interface overcoming the issues with the notification mechanisms previously available. This new interface needed to be strongly typed, easy to extend, and versatile enough to be used as the standard interface when adding new notifications. See @ref{GDB Observers} for a brief description of the observers currently implemented in GDB. The rationale for the current implementation is also briefly discussed. @node User Interface @chapter User Interface @value{GDBN} has several user interfaces. Although the command-line interface is the most common and most familiar, there are others. @section Command Interpreter @cindex command interpreter @cindex CLI The command interpreter in @value{GDBN} is fairly simple. It is designed to allow for the set of commands to be augmented dynamically, and also has a recursive subcommand capability, where the first argument to a command may itself direct a lookup on a different command list. For instance, the @samp{set} command just starts a lookup on the @code{setlist} command list, while @samp{set thread} recurses to the @code{set_thread_cmd_list}. @findex add_cmd @findex add_com To add commands in general, use @code{add_cmd}. @code{add_com} adds to the main command list, and should be used for those commands. The usual place to add commands is in the @code{_initialize_@var{xyz}} routines at the ends of most source files. @findex add_setshow_cmd @findex add_setshow_cmd_full To add paired @samp{set} and @samp{show} commands, use @code{add_setshow_cmd} or @code{add_setshow_cmd_full}. The former is a slightly simpler interface which is useful when you don't need to further modify the new command structures, while the latter returns the new command structures for manipulation. @cindex deprecating commands @findex deprecate_cmd Before removing commands from the command set it is a good idea to deprecate them for some time. Use @code{deprecate_cmd} on commands or aliases to set the deprecated flag. @code{deprecate_cmd} takes a @code{struct cmd_list_element} as it's first argument. You can use the return value from @code{add_com} or @code{add_cmd} to deprecate the command immediately after it is created. The first time a command is used the user will be warned and offered a replacement (if one exists). Note that the replacement string passed to @code{deprecate_cmd} should be the full name of the command, i.e. the entire string the user should type at the command line. @section UI-Independent Output---the @code{ui_out} Functions @c This section is based on the documentation written by Fernando @c Nasser . @cindex @code{ui_out} functions The @code{ui_out} functions present an abstraction level for the @value{GDBN} output code. They hide the specifics of different user interfaces supported by @value{GDBN}, and thus free the programmer from the need to write several versions of the same code, one each for every UI, to produce output. @subsection Overview and Terminology In general, execution of each @value{GDBN} command produces some sort of output, and can even generate an input request. Output can be generated for the following purposes: @itemize @bullet @item to display a @emph{result} of an operation; @item to convey @emph{info} or produce side-effects of a requested operation; @item to provide a @emph{notification} of an asynchronous event (including progress indication of a prolonged asynchronous operation); @item to display @emph{error messages} (including warnings); @item to show @emph{debug data}; @item to @emph{query} or prompt a user for input (a special case). @end itemize @noindent This section mainly concentrates on how to build result output, although some of it also applies to other kinds of output. Generation of output that displays the results of an operation involves one or more of the following: @itemize @bullet @item output of the actual data @item formatting the output as appropriate for console output, to make it easily readable by humans @item machine oriented formatting--a more terse formatting to allow for easy parsing by programs which read @value{GDBN}'s output @item annotation, whose purpose is to help legacy GUIs to identify interesting parts in the output @end itemize The @code{ui_out} routines take care of the first three aspects. Annotations are provided by separate annotation routines. Note that use of annotations for an interface between a GUI and @value{GDBN} is deprecated. Output can be in the form of a single item, which we call a @dfn{field}; a @dfn{list} consisting of identical fields; a @dfn{tuple} consisting of non-identical fields; or a @dfn{table}, which is a tuple consisting of a header and a body. In a BNF-like form: @table @code @item @expansion{} @code{
} @item
@expansion{} @code{@{ @}} @item @expansion{} @code{ } @item <body> @expansion{} @code{@{<row>@}} @end table @subsection General Conventions Most @code{ui_out} routines are of type @code{void}, the exceptions are @code{ui_out_stream_new} (which returns a pointer to the newly created object) and the @code{make_cleanup} routines. The first parameter is always the @code{ui_out} vector object, a pointer to a @code{struct ui_out}. The @var{format} parameter is like in @code{printf} family of functions. When it is present, there must also be a variable list of arguments sufficient used to satisfy the @code{%} specifiers in the supplied format. When a character string argument is not used in a @code{ui_out} function call, a @code{NULL} pointer has to be supplied instead. @subsection Table, Tuple and List Functions @cindex list output functions @cindex table output functions @cindex tuple output functions This section introduces @code{ui_out} routines for building lists, tuples and tables. The routines to output the actual data items (fields) are presented in the next section. To recap: A @dfn{tuple} is a sequence of @dfn{fields}, each field containing information about an object; a @dfn{list} is a sequence of fields where each field describes an identical object. Use the @dfn{table} functions when your output consists of a list of rows (tuples) and the console output should include a heading. Use this even when you are listing just one object but you still want the header. @cindex nesting level in @code{ui_out} functions Tables can not be nested. Tuples and lists can be nested up to a maximum of five levels. The overall structure of the table output code is something like this: @smallexample ui_out_table_begin ui_out_table_header @dots{} ui_out_table_body ui_out_tuple_begin ui_out_field_* @dots{} ui_out_tuple_end @dots{} ui_out_table_end @end smallexample Here is the description of table-, tuple- and list-related @code{ui_out} functions: @deftypefun void ui_out_table_begin (struct ui_out *@var{uiout}, int @var{nbrofcols}, int @var{nr_rows}, const char *@var{tblid}) The function @code{ui_out_table_begin} marks the beginning of the output of a table. It should always be called before any other @code{ui_out} function for a given table. @var{nbrofcols} is the number of columns in the table. @var{nr_rows} is the number of rows in the table. @var{tblid} is an optional string identifying the table. The string pointed to by @var{tblid} is copied by the implementation of @code{ui_out_table_begin}, so the application can free the string if it was @code{malloc}ed. The companion function @code{ui_out_table_end}, described below, marks the end of the table's output. @end deftypefun @deftypefun void ui_out_table_header (struct ui_out *@var{uiout}, int @var{width}, enum ui_align @var{alignment}, const char *@var{colhdr}) @code{ui_out_table_header} provides the header information for a single table column. You call this function several times, one each for every column of the table, after @code{ui_out_table_begin}, but before @code{ui_out_table_body}. The value of @var{width} gives the column width in characters. The value of @var{alignment} is one of @code{left}, @code{center}, and @code{right}, and it specifies how to align the header: left-justify, center, or right-justify it. @var{colhdr} points to a string that specifies the column header; the implementation copies that string, so column header strings in @code{malloc}ed storage can be freed after the call. @end deftypefun @deftypefun void ui_out_table_body (struct ui_out *@var{uiout}) This function delimits the table header from the table body. @end deftypefun @deftypefun void ui_out_table_end (struct ui_out *@var{uiout}) This function signals the end of a table's output. It should be called after the table body has been produced by the list and field output functions. There should be exactly one call to @code{ui_out_table_end} for each call to @code{ui_out_table_begin}, otherwise the @code{ui_out} functions will signal an internal error. @end deftypefun The output of the tuples that represent the table rows must follow the call to @code{ui_out_table_body} and precede the call to @code{ui_out_table_end}. You build a tuple by calling @code{ui_out_tuple_begin} and @code{ui_out_tuple_end}, with suitable calls to functions which actually output fields between them. @deftypefun void ui_out_tuple_begin (struct ui_out *@var{uiout}, const char *@var{id}) This function marks the beginning of a tuple output. @var{id} points to an optional string that identifies the tuple; it is copied by the implementation, and so strings in @code{malloc}ed storage can be freed after the call. @end deftypefun @deftypefun void ui_out_tuple_end (struct ui_out *@var{uiout}) This function signals an end of a tuple output. There should be exactly one call to @code{ui_out_tuple_end} for each call to @code{ui_out_tuple_begin}, otherwise an internal @value{GDBN} error will be signaled. @end deftypefun @deftypefun struct cleanup *make_cleanup_ui_out_tuple_begin_end (struct ui_out *@var{uiout}, const char *@var{id}) This function first opens the tuple and then establishes a cleanup (@pxref{Coding, Cleanups}) to close the tuple. It provides a convenient and correct implementation of the non-portable@footnote{The function cast is not portable ISO C.} code sequence: @smallexample struct cleanup *old_cleanup; ui_out_tuple_begin (uiout, "..."); old_cleanup = make_cleanup ((void(*)(void *)) ui_out_tuple_end, uiout); @end smallexample @end deftypefun @deftypefun void ui_out_list_begin (struct ui_out *@var{uiout}, const char *@var{id}) This function marks the beginning of a list output. @var{id} points to an optional string that identifies the list; it is copied by the implementation, and so strings in @code{malloc}ed storage can be freed after the call. @end deftypefun @deftypefun void ui_out_list_end (struct ui_out *@var{uiout}) This function signals an end of a list output. There should be exactly one call to @code{ui_out_list_end} for each call to @code{ui_out_list_begin}, otherwise an internal @value{GDBN} error will be signaled. @end deftypefun @deftypefun struct cleanup *make_cleanup_ui_out_list_begin_end (struct ui_out *@var{uiout}, const char *@var{id}) Similar to @code{make_cleanup_ui_out_tuple_begin_end}, this function opens a list and then establishes cleanup (@pxref{Coding, Cleanups}) that will close the list.list. @end deftypefun @subsection Item Output Functions @cindex item output functions @cindex field output functions @cindex data output The functions described below produce output for the actual data items, or fields, which contain information about the object. Choose the appropriate function accordingly to your particular needs. @deftypefun void ui_out_field_fmt (struct ui_out *@var{uiout}, char *@var{fldname}, char *@var{format}, ...) This is the most general output function. It produces the representation of the data in the variable-length argument list according to formatting specifications in @var{format}, a @code{printf}-like format string. The optional argument @var{fldname} supplies the name of the field. The data items themselves are supplied as additional arguments after @var{format}. This generic function should be used only when it is not possible to use one of the specialized versions (see below). @end deftypefun @deftypefun void ui_out_field_int (struct ui_out *@var{uiout}, const char *@var{fldname}, int @var{value}) This function outputs a value of an @code{int} variable. It uses the @code{"%d"} output conversion specification. @var{fldname} specifies the name of the field. @end deftypefun @deftypefun void ui_out_field_fmt_int (struct ui_out *@var{uiout}, int @var{width}, enum ui_align @var{alignment}, const char *@var{fldname}, int @var{value}) This function outputs a value of an @code{int} variable. It differs from @code{ui_out_field_int} in that the caller specifies the desired @var{width} and @var{alignment} of the output. @var{fldname} specifies the name of the field. @end deftypefun @deftypefun void ui_out_field_core_addr (struct ui_out *@var{uiout}, const char *@var{fldname}, CORE_ADDR @var{address}) This function outputs an address. @end deftypefun @deftypefun void ui_out_field_string (struct ui_out *@var{uiout}, const char *@var{fldname}, const char *@var{string}) This function outputs a string using the @code{"%s"} conversion specification. @end deftypefun Sometimes, there's a need to compose your output piece by piece using functions that operate on a stream, such as @code{value_print} or @code{fprintf_symbol_filtered}. These functions accept an argument of the type @code{struct ui_file *}, a pointer to a @code{ui_file} object used to store the data stream used for the output. When you use one of these functions, you need a way to pass their results stored in a @code{ui_file} object to the @code{ui_out} functions. To this end, you first create a @code{ui_stream} object by calling @code{ui_out_stream_new}, pass the @code{stream} member of that @code{ui_stream} object to @code{value_print} and similar functions, and finally call @code{ui_out_field_stream} to output the field you constructed. When the @code{ui_stream} object is no longer needed, you should destroy it and free its memory by calling @code{ui_out_stream_delete}. @deftypefun struct ui_stream *ui_out_stream_new (struct ui_out *@var{uiout}) This function creates a new @code{ui_stream} object which uses the same output methods as the @code{ui_out} object whose pointer is passed in @var{uiout}. It returns a pointer to the newly created @code{ui_stream} object. @end deftypefun @deftypefun void ui_out_stream_delete (struct ui_stream *@var{streambuf}) This functions destroys a @code{ui_stream} object specified by @var{streambuf}. @end deftypefun @deftypefun void ui_out_field_stream (struct ui_out *@var{uiout}, const char *@var{fieldname}, struct ui_stream *@var{streambuf}) This function consumes all the data accumulated in @code{streambuf->stream} and outputs it like @code{ui_out_field_string} does. After a call to @code{ui_out_field_stream}, the accumulated data no longer exists, but the stream is still valid and may be used for producing more fields. @end deftypefun @strong{Important:} If there is any chance that your code could bail out before completing output generation and reaching the point where @code{ui_out_stream_delete} is called, it is necessary to set up a cleanup, to avoid leaking memory and other resources. Here's a skeleton code to do that: @smallexample struct ui_stream *mybuf = ui_out_stream_new (uiout); struct cleanup *old = make_cleanup (ui_out_stream_delete, mybuf); ... do_cleanups (old); @end smallexample If the function already has the old cleanup chain set (for other kinds of cleanups), you just have to add your cleanup to it: @smallexample mybuf = ui_out_stream_new (uiout); make_cleanup (ui_out_stream_delete, mybuf); @end smallexample Note that with cleanups in place, you should not call @code{ui_out_stream_delete} directly, or you would attempt to free the same buffer twice. @subsection Utility Output Functions @deftypefun void ui_out_field_skip (struct ui_out *@var{uiout}, const char *@var{fldname}) This function skips a field in a table. Use it if you have to leave an empty field without disrupting the table alignment. The argument @var{fldname} specifies a name for the (missing) filed. @end deftypefun @deftypefun void ui_out_text (struct ui_out *@var{uiout}, const char *@var{string}) This function outputs the text in @var{string} in a way that makes it easy to be read by humans. For example, the console implementation of this method filters the text through a built-in pager, to prevent it from scrolling off the visible portion of the screen. Use this function for printing relatively long chunks of text around the actual field data: the text it produces is not aligned according to the table's format. Use @code{ui_out_field_string} to output a string field, and use @code{ui_out_message}, described below, to output short messages. @end deftypefun @deftypefun void ui_out_spaces (struct ui_out *@var{uiout}, int @var{nspaces}) This function outputs @var{nspaces} spaces. It is handy to align the text produced by @code{ui_out_text} with the rest of the table or list. @end deftypefun @deftypefun void ui_out_message (struct ui_out *@var{uiout}, int @var{verbosity}, const char *@var{format}, ...) This function produces a formatted message, provided that the current verbosity level is at least as large as given by @var{verbosity}. The current verbosity level is specified by the user with the @samp{set verbositylevel} command.@footnote{As of this writing (April 2001), setting verbosity level is not yet implemented, and is always returned as zero. So calling @code{ui_out_message} with a @var{verbosity} argument more than zero will cause the message to never be printed.} @end deftypefun @deftypefun void ui_out_wrap_hint (struct ui_out *@var{uiout}, char *@var{indent}) This function gives the console output filter (a paging filter) a hint of where to break lines which are too long. Ignored for all other output consumers. @var{indent}, if non-@code{NULL}, is the string to be printed to indent the wrapped text on the next line; it must remain accessible until the next call to @code{ui_out_wrap_hint}, or until an explicit newline is produced by one of the other functions. If @var{indent} is @code{NULL}, the wrapped text will not be indented. @end deftypefun @deftypefun void ui_out_flush (struct ui_out *@var{uiout}) This function flushes whatever output has been accumulated so far, if the UI buffers output. @end deftypefun @subsection Examples of Use of @code{ui_out} functions @cindex using @code{ui_out} functions @cindex @code{ui_out} functions, usage examples This section gives some practical examples of using the @code{ui_out} functions to generalize the old console-oriented code in @value{GDBN}. The examples all come from functions defined on the @file{breakpoints.c} file. This example, from the @code{breakpoint_1} function, shows how to produce a table. The original code was: @smallexample if (!found_a_breakpoint++) @{ annotate_breakpoints_headers (); annotate_field (0); printf_filtered ("Num "); annotate_field (1); printf_filtered ("Type "); annotate_field (2); printf_filtered ("Disp "); annotate_field (3); printf_filtered ("Enb "); if (addressprint) @{ annotate_field (4); printf_filtered ("Address "); @} annotate_field (5); printf_filtered ("What\n"); annotate_breakpoints_table (); @} @end smallexample Here's the new version: @smallexample nr_printable_breakpoints = @dots{}; if (addressprint) ui_out_table_begin (ui, 6, nr_printable_breakpoints, "BreakpointTable"); else ui_out_table_begin (ui, 5, nr_printable_breakpoints, "BreakpointTable"); if (nr_printable_breakpoints > 0) annotate_breakpoints_headers (); if (nr_printable_breakpoints > 0) annotate_field (0); ui_out_table_header (uiout, 3, ui_left, "number", "Num"); /* 1 */ if (nr_printable_breakpoints > 0) annotate_field (1); ui_out_table_header (uiout, 14, ui_left, "type", "Type"); /* 2 */ if (nr_printable_breakpoints > 0) annotate_field (2); ui_out_table_header (uiout, 4, ui_left, "disp", "Disp"); /* 3 */ if (nr_printable_breakpoints > 0) annotate_field (3); ui_out_table_header (uiout, 3, ui_left, "enabled", "Enb"); /* 4 */ if (addressprint) @{ if (nr_printable_breakpoints > 0) annotate_field (4); if (TARGET_ADDR_BIT <= 32) ui_out_table_header (uiout, 10, ui_left, "addr", "Address");/* 5 */ else ui_out_table_header (uiout, 18, ui_left, "addr", "Address");/* 5 */ @} if (nr_printable_breakpoints > 0) annotate_field (5); ui_out_table_header (uiout, 40, ui_noalign, "what", "What"); /* 6 */ ui_out_table_body (uiout); if (nr_printable_breakpoints > 0) annotate_breakpoints_table (); @end smallexample This example, from the @code{print_one_breakpoint} function, shows how to produce the actual data for the table whose structure was defined in the above example. The original code was: @smallexample annotate_record (); annotate_field (0); printf_filtered ("%-3d ", b->number); annotate_field (1); if ((int)b->type > (sizeof(bptypes)/sizeof(bptypes[0])) || ((int) b->type != bptypes[(int) b->type].type)) internal_error ("bptypes table does not describe type #%d.", (int)b->type); printf_filtered ("%-14s ", bptypes[(int)b->type].description); annotate_field (2); printf_filtered ("%-4s ", bpdisps[(int)b->disposition]); annotate_field (3); printf_filtered ("%-3c ", bpenables[(int)b->enable]); @dots{} @end smallexample This is the new version: @smallexample annotate_record (); ui_out_tuple_begin (uiout, "bkpt"); annotate_field (0); ui_out_field_int (uiout, "number", b->number); annotate_field (1); if (((int) b->type > (sizeof (bptypes) / sizeof (bptypes[0]))) || ((int) b->type != bptypes[(int) b->type].type)) internal_error ("bptypes table does not describe type #%d.", (int) b->type); ui_out_field_string (uiout, "type", bptypes[(int)b->type].description); annotate_field (2); ui_out_field_string (uiout, "disp", bpdisps[(int)b->disposition]); annotate_field (3); ui_out_field_fmt (uiout, "enabled", "%c", bpenables[(int)b->enable]); @dots{} @end smallexample This example, also from @code{print_one_breakpoint}, shows how to produce a complicated output field using the @code{print_expression} functions which requires a stream to be passed. It also shows how to automate stream destruction with cleanups. The original code was: @smallexample annotate_field (5); print_expression (b->exp, gdb_stdout); @end smallexample The new version is: @smallexample struct ui_stream *stb = ui_out_stream_new (uiout); struct cleanup *old_chain = make_cleanup_ui_out_stream_delete (stb); ... annotate_field (5); print_expression (b->exp, stb->stream); ui_out_field_stream (uiout, "what", local_stream); @end smallexample This example, also from @code{print_one_breakpoint}, shows how to use @code{ui_out_text} and @code{ui_out_field_string}. The original code was: @smallexample annotate_field (5); if (b->dll_pathname == NULL) printf_filtered ("<any library> "); else printf_filtered ("library \"%s\" ", b->dll_pathname); @end smallexample It became: @smallexample annotate_field (5); if (b->dll_pathname == NULL) @{ ui_out_field_string (uiout, "what", "<any library>"); ui_out_spaces (uiout, 1); @} else @{ ui_out_text (uiout, "library \""); ui_out_field_string (uiout, "what", b->dll_pathname); ui_out_text (uiout, "\" "); @} @end smallexample The following example from @code{print_one_breakpoint} shows how to use @code{ui_out_field_int} and @code{ui_out_spaces}. The original code was: @smallexample annotate_field (5); if (b->forked_inferior_pid != 0) printf_filtered ("process %d ", b->forked_inferior_pid); @end smallexample It became: @smallexample annotate_field (5); if (b->forked_inferior_pid != 0) @{ ui_out_text (uiout, "process "); ui_out_field_int (uiout, "what", b->forked_inferior_pid); ui_out_spaces (uiout, 1); @} @end smallexample Here's an example of using @code{ui_out_field_string}. The original code was: @smallexample annotate_field (5); if (b->exec_pathname != NULL) printf_filtered ("program \"%s\" ", b->exec_pathname); @end smallexample It became: @smallexample annotate_field (5); if (b->exec_pathname != NULL) @{ ui_out_text (uiout, "program \""); ui_out_field_string (uiout, "what", b->exec_pathname); ui_out_text (uiout, "\" "); @} @end smallexample Finally, here's an example of printing an address. The original code: @smallexample annotate_field (4); printf_filtered ("%s ", hex_string_custom ((unsigned long) b->address, 8)); @end smallexample It became: @smallexample annotate_field (4); ui_out_field_core_addr (uiout, "Address", b->address); @end smallexample @section Console Printing @section TUI @node libgdb @chapter libgdb @section libgdb 1.0 @cindex @code{libgdb} @code{libgdb} 1.0 was an abortive project of years ago. The theory was to provide an API to @value{GDBN}'s functionality. @section libgdb 2.0 @cindex @code{libgdb} @code{libgdb} 2.0 is an ongoing effort to update @value{GDBN} so that is better able to support graphical and other environments. Since @code{libgdb} development is on-going, its architecture is still evolving. The following components have so far been identified: @itemize @bullet @item Observer - @file{gdb-events.h}. @item Builder - @file{ui-out.h} @item Event Loop - @file{event-loop.h} @item Library - @file{gdb.h} @end itemize The model that ties these components together is described below. @section The @code{libgdb} Model A client of @code{libgdb} interacts with the library in two ways. @itemize @bullet @item As an observer (using @file{gdb-events}) receiving notifications from @code{libgdb} of any internal state changes (break point changes, run state, etc). @item As a client querying @code{libgdb} (using the @file{ui-out} builder) to obtain various status values from @value{GDBN}. @end itemize Since @code{libgdb} could have multiple clients (e.g. a GUI supporting the existing @value{GDBN} CLI), those clients must co-operate when controlling @code{libgdb}. In particular, a client must ensure that @code{libgdb} is idle (i.e. no other client is using @code{libgdb}) before responding to a @file{gdb-event} by making a query. @section CLI support At present @value{GDBN}'s CLI is very much entangled in with the core of @code{libgdb}. Consequently, a client wishing to include the CLI in their interface needs to carefully co-ordinate its own and the CLI's requirements. It is suggested that the client set @code{libgdb} up to be bi-modal (alternate between CLI and client query modes). The notes below sketch out the theory: @itemize @bullet @item The client registers itself as an observer of @code{libgdb}. @item The client create and install @code{cli-out} builder using its own versions of the @code{ui-file} @code{gdb_stderr}, @code{gdb_stdtarg} and @code{gdb_stdout} streams. @item The client creates a separate custom @code{ui-out} builder that is only used while making direct queries to @code{libgdb}. @end itemize When the client receives input intended for the CLI, it simply passes it along. Since the @code{cli-out} builder is installed by default, all the CLI output in response to that command is routed (pronounced rooted) through to the client controlled @code{gdb_stdout} et.@: al.@: streams. At the same time, the client is kept abreast of internal changes by virtue of being a @code{libgdb} observer. The only restriction on the client is that it must wait until @code{libgdb} becomes idle before initiating any queries (using the client's custom builder). @section @code{libgdb} components @subheading Observer - @file{gdb-events.h} @file{gdb-events} provides the client with a very raw mechanism that can be used to implement an observer. At present it only allows for one observer and that observer must, internally, handle the need to delay the processing of any event notifications until after @code{libgdb} has finished the current command. @subheading Builder - @file{ui-out.h} @file{ui-out} provides the infrastructure necessary for a client to create a builder. That builder is then passed down to @code{libgdb} when doing any queries. @subheading Event Loop - @file{event-loop.h} @c There could be an entire section on the event-loop @file{event-loop}, currently non-re-entrant, provides a simple event loop. A client would need to either plug its self into this loop or, implement a new event-loop that GDB would use. The event-loop will eventually be made re-entrant. This is so that @value{GDBN} can better handle the problem of some commands blocking instead of returning. @subheading Library - @file{gdb.h} @file{libgdb} is the most obvious component of this system. It provides the query interface. Each function is parameterized by a @code{ui-out} builder. The result of the query is constructed using that builder before the query function returns. @node Symbol Handling @chapter Symbol Handling Symbols are a key part of @value{GDBN}'s operation. Symbols include variables, functions, and types. @section Symbol Reading @cindex symbol reading @cindex reading of symbols @cindex symbol files @value{GDBN} reads symbols from @dfn{symbol files}. The usual symbol file is the file containing the program which @value{GDBN} is debugging. @value{GDBN} can be directed to use a different file for symbols (with the @samp{symbol-file} command), and it can also read more symbols via the @samp{add-file} and @samp{load} commands, or while reading symbols from shared libraries. @findex find_sym_fns Symbol files are initially opened by code in @file{symfile.c} using the BFD library (@pxref{Support Libraries}). BFD identifies the type of the file by examining its header. @code{find_sym_fns} then uses this identification to locate a set of symbol-reading functions. @findex add_symtab_fns @cindex @code{sym_fns} structure @cindex adding a symbol-reading module Symbol-reading modules identify themselves to @value{GDBN} by calling @code{add_symtab_fns} during their module initialization. The argument to @code{add_symtab_fns} is a @code{struct sym_fns} which contains the name (or name prefix) of the symbol format, the length of the prefix, and pointers to four functions. These functions are called at various times to process symbol files whose identification matches the specified prefix. The functions supplied by each module are: @table @code @item @var{xyz}_symfile_init(struct sym_fns *sf) @cindex secondary symbol file Called from @code{symbol_file_add} when we are about to read a new symbol file. This function should clean up any internal state (possibly resulting from half-read previous files, for example) and prepare to read a new symbol file. Note that the symbol file which we are reading might be a new ``main'' symbol file, or might be a secondary symbol file whose symbols are being added to the existing symbol table. The argument to @code{@var{xyz}_symfile_init} is a newly allocated @code{struct sym_fns} whose @code{bfd} field contains the BFD for the new symbol file being read. Its @code{private} field has been zeroed, and can be modified as desired. Typically, a struct of private information will be @code{malloc}'d, and a pointer to it will be placed in the @code{private} field. There is no result from @code{@var{xyz}_symfile_init}, but it can call @code{error} if it detects an unavoidable problem. @item @var{xyz}_new_init() Called from @code{symbol_file_add} when discarding existing symbols. This function needs only handle the symbol-reading module's internal state; the symbol table data structures visible to the rest of @value{GDBN} will be discarded by @code{symbol_file_add}. It has no arguments and no result. It may be called after @code{@var{xyz}_symfile_init}, if a new symbol table is being read, or may be called alone if all symbols are simply being discarded. @item @var{xyz}_symfile_read(struct sym_fns *sf, CORE_ADDR addr, int mainline) Called from @code{symbol_file_add} to actually read the symbols from a symbol-file into a set of psymtabs or symtabs. @code{sf} points to the @code{struct sym_fns} originally passed to @code{@var{xyz}_sym_init} for possible initialization. @code{addr} is the offset between the file's specified start address and its true address in memory. @code{mainline} is 1 if this is the main symbol table being read, and 0 if a secondary symbol file (e.g. shared library or dynamically loaded file) is being read.@refill @end table In addition, if a symbol-reading module creates psymtabs when @var{xyz}_symfile_read is called, these psymtabs will contain a pointer to a function @code{@var{xyz}_psymtab_to_symtab}, which can be called from any point in the @value{GDBN} symbol-handling code. @table @code @item @var{xyz}_psymtab_to_symtab (struct partial_symtab *pst) Called from @code{psymtab_to_symtab} (or the @code{PSYMTAB_TO_SYMTAB} macro) if the psymtab has not already been read in and had its @code{pst->symtab} pointer set. The argument is the psymtab to be fleshed-out into a symtab. Upon return, @code{pst->readin} should have been set to 1, and @code{pst->symtab} should contain a pointer to the new corresponding symtab, or zero if there were no symbols in that part of the symbol file. @end table @section Partial Symbol Tables @value{GDBN} has three types of symbol tables: @itemize @bullet @cindex full symbol table @cindex symtabs @item Full symbol tables (@dfn{symtabs}). These contain the main information about symbols and addresses. @cindex psymtabs @item Partial symbol tables (@dfn{psymtabs}). These contain enough information to know when to read the corresponding part of the full symbol table. @cindex minimal symbol table @cindex minsymtabs @item Minimal symbol tables (@dfn{msymtabs}). These contain information gleaned from non-debugging symbols. @end itemize @cindex partial symbol table This section describes partial symbol tables. A psymtab is constructed by doing a very quick pass over an executable file's debugging information. Small amounts of information are extracted---enough to identify which parts of the symbol table will need to be re-read and fully digested later, when the user needs the information. The speed of this pass causes @value{GDBN} to start up very quickly. Later, as the detailed rereading occurs, it occurs in small pieces, at various times, and the delay therefrom is mostly invisible to the user. @c (@xref{Symbol Reading}.) The symbols that show up in a file's psymtab should be, roughly, those visible to the debugger's user when the program is not running code from that file. These include external symbols and types, static symbols and types, and @code{enum} values declared at file scope. The psymtab also contains the range of instruction addresses that the full symbol table would represent. @cindex finding a symbol @cindex symbol lookup The idea is that there are only two ways for the user (or much of the code in the debugger) to reference a symbol: @itemize @bullet @findex find_pc_function @findex find_pc_line @item By its address (e.g. execution stops at some address which is inside a function in this file). The address will be noticed to be in the range of this psymtab, and the full symtab will be read in. @code{find_pc_function}, @code{find_pc_line}, and other @code{find_pc_@dots{}} functions handle this. @cindex lookup_symbol @item By its name (e.g. the user asks to print a variable, or set a breakpoint on a function). Global names and file-scope names will be found in the psymtab, which will cause the symtab to be pulled in. Local names will have to be qualified by a global name, or a file-scope name, in which case we will have already read in the symtab as we evaluated the qualifier. Or, a local symbol can be referenced when we are ``in'' a local scope, in which case the first case applies. @code{lookup_symbol} does most of the work here. @end itemize The only reason that psymtabs exist is to cause a symtab to be read in at the right moment. Any symbol that can be elided from a psymtab, while still causing that to happen, should not appear in it. Since psymtabs don't have the idea of scope, you can't put local symbols in them anyway. Psymtabs don't have the idea of the type of a symbol, either, so types need not appear, unless they will be referenced by name. It is a bug for @value{GDBN} to behave one way when only a psymtab has been read, and another way if the corresponding symtab has been read in. Such bugs are typically caused by a psymtab that does not contain all the visible symbols, or which has the wrong instruction address ranges. The psymtab for a particular section of a symbol file (objfile) could be thrown away after the symtab has been read in. The symtab should always be searched before the psymtab, so the psymtab will never be used (in a bug-free environment). Currently, psymtabs are allocated on an obstack, and all the psymbols themselves are allocated in a pair of large arrays on an obstack, so there is little to be gained by trying to free them unless you want to do a lot more work. @section Types @unnumberedsubsec Fundamental Types (e.g., @code{FT_VOID}, @code{FT_BOOLEAN}). @cindex fundamental types These are the fundamental types that @value{GDBN} uses internally. Fundamental types from the various debugging formats (stabs, ELF, etc) are mapped into one of these. They are basically a union of all fundamental types that @value{GDBN} knows about for all the languages that @value{GDBN} knows about. @unnumberedsubsec Type Codes (e.g., @code{TYPE_CODE_PTR}, @code{TYPE_CODE_ARRAY}). @cindex type codes Each time @value{GDBN} builds an internal type, it marks it with one of these types. The type may be a fundamental type, such as @code{TYPE_CODE_INT}, or a derived type, such as @code{TYPE_CODE_PTR} which is a pointer to another type. Typically, several @code{FT_*} types map to one @code{TYPE_CODE_*} type, and are distinguished by other members of the type struct, such as whether the type is signed or unsigned, and how many bits it uses. @unnumberedsubsec Builtin Types (e.g., @code{builtin_type_void}, @code{builtin_type_char}). These are instances of type structs that roughly correspond to fundamental types and are created as global types for @value{GDBN} to use for various ugly historical reasons. We eventually want to eliminate these. Note for example that @code{builtin_type_int} initialized in @file{gdbtypes.c} is basically the same as a @code{TYPE_CODE_INT} type that is initialized in @file{c-lang.c} for an @code{FT_INTEGER} fundamental type. The difference is that the @code{builtin_type} is not associated with any particular objfile, and only one instance exists, while @file{c-lang.c} builds as many @code{TYPE_CODE_INT} types as needed, with each one associated with some particular objfile. @section Object File Formats @cindex object file formats @subsection a.out @cindex @code{a.out} format The @code{a.out} format is the original file format for Unix. It consists of three sections: @code{text}, @code{data}, and @code{bss}, which are for program code, initialized data, and uninitialized data, respectively. The @code{a.out} format is so simple that it doesn't have any reserved place for debugging information. (Hey, the original Unix hackers used @samp{adb}, which is a machine-language debugger!) The only debugging format for @code{a.out} is stabs, which is encoded as a set of normal symbols with distinctive attributes. The basic @code{a.out} reader is in @file{dbxread.c}. @subsection COFF @cindex COFF format The COFF format was introduced with System V Release 3 (SVR3) Unix. COFF files may have multiple sections, each prefixed by a header. The number of sections is limited. The COFF specification includes support for debugging. Although this was a step forward, the debugging information was woefully limited. For instance, it was not possible to represent code that came from an included file. The COFF reader is in @file{coffread.c}. @subsection ECOFF @cindex ECOFF format ECOFF is an extended COFF originally introduced for Mips and Alpha workstations. The basic ECOFF reader is in @file{mipsread.c}. @subsection XCOFF @cindex XCOFF format The IBM RS/6000 running AIX uses an object file format called XCOFF. The COFF sections, symbols, and line numbers are used, but debugging symbols are @code{dbx}-style stabs whose strings are located in the @code{.debug} section (rather than the string table). For more information, see @ref{Top,,,stabs,The Stabs Debugging Format}. The shared library scheme has a clean interface for figuring out what shared libraries are in use, but the catch is that everything which refers to addresses (symbol tables and breakpoints at least) needs to be relocated for both shared libraries and the main executable. At least using the standard mechanism this can only be done once the program has been run (or the core file has been read). @subsection PE @cindex PE-COFF format Windows 95 and NT use the PE (@dfn{Portable Executable}) format for their executables. PE is basically COFF with additional headers. While BFD includes special PE support, @value{GDBN} needs only the basic COFF reader. @subsection ELF @cindex ELF format The ELF format came with System V Release 4 (SVR4) Unix. ELF is similar to COFF in being organized into a number of sections, but it removes many of COFF's limitations. The basic ELF reader is in @file{elfread.c}. @subsection SOM @cindex SOM format SOM is HP's object file and debug format (not to be confused with IBM's SOM, which is a cross-language ABI). The SOM reader is in @file{hpread.c}. @subsection Other File Formats @cindex Netware Loadable Module format Other file formats that have been supported by @value{GDBN} include Netware Loadable Modules (@file{nlmread.c}). @section Debugging File Formats This section describes characteristics of debugging information that are independent of the object file format. @subsection stabs @cindex stabs debugging info @code{stabs} started out as special symbols within the @code{a.out} format. Since then, it has been encapsulated into other file formats, such as COFF and ELF. While @file{dbxread.c} does some of the basic stab processing, including for encapsulated versions, @file{stabsread.c} does the real work. @subsection COFF @cindex COFF debugging info The basic COFF definition includes debugging information. The level of support is minimal and non-extensible, and is not often used. @subsection Mips debug (Third Eye) @cindex ECOFF debugging info ECOFF includes a definition of a special debug format. The file @file{mdebugread.c} implements reading for this format. @subsection DWARF 1 @cindex DWARF 1 debugging info DWARF 1 is a debugging format that was originally designed to be used with ELF in SVR4 systems. @c GCC_PRODUCER @c GPLUS_PRODUCER @c LCC_PRODUCER @c If defined, these are the producer strings in a DWARF 1 file. All of @c these have reasonable defaults already. The DWARF 1 reader is in @file{dwarfread.c}. @subsection DWARF 2 @cindex DWARF 2 debugging info DWARF 2 is an improved but incompatible version of DWARF 1. The DWARF 2 reader is in @file{dwarf2read.c}. @subsection SOM @cindex SOM debugging info Like COFF, the SOM definition includes debugging information. @section Adding a New Symbol Reader to @value{GDBN} @cindex adding debugging info reader If you are using an existing object file format (@code{a.out}, COFF, ELF, etc), there is probably little to be done. If you need to add a new object file format, you must first add it to BFD. This is beyond the scope of this document. You must then arrange for the BFD code to provide access to the debugging symbols. Generally @value{GDBN} will have to call swapping routines from BFD and a few other BFD internal routines to locate the debugging information. As much as possible, @value{GDBN} should not depend on the BFD internal data structures. For some targets (e.g., COFF), there is a special transfer vector used to call swapping routines, since the external data structures on various platforms have different sizes and layouts. Specialized routines that will only ever be implemented by one object file format may be called directly. This interface should be described in a file @file{bfd/lib@var{xyz}.h}, which is included by @value{GDBN}. @node Language Support @chapter Language Support @cindex language support @value{GDBN}'s language support is mainly driven by the symbol reader, although it is possible for the user to set the source language manually. @value{GDBN} chooses the source language by looking at the extension of the file recorded in the debug info; @file{.c} means C, @file{.f} means Fortran, etc. It may also use a special-purpose language identifier if the debug format supports it, like with DWARF. @section Adding a Source Language to @value{GDBN} @cindex adding source language To add other languages to @value{GDBN}'s expression parser, follow the following steps: @table @emph @item Create the expression parser. @cindex expression parser This should reside in a file @file{@var{lang}-exp.y}. Routines for building parsed expressions into a @code{union exp_element} list are in @file{parse.c}. @cindex language parser Since we can't depend upon everyone having Bison, and YACC produces parsers that define a bunch of global names, the following lines @strong{must} be included at the top of the YACC parser, to prevent the various parsers from defining the same global names: @smallexample #define yyparse @var{lang}_parse #define yylex @var{lang}_lex #define yyerror @var{lang}_error #define yylval @var{lang}_lval #define yychar @var{lang}_char #define yydebug @var{lang}_debug #define yypact @var{lang}_pact #define yyr1 @var{lang}_r1 #define yyr2 @var{lang}_r2 #define yydef @var{lang}_def #define yychk @var{lang}_chk #define yypgo @var{lang}_pgo #define yyact @var{lang}_act #define yyexca @var{lang}_exca #define yyerrflag @var{lang}_errflag #define yynerrs @var{lang}_nerrs @end smallexample At the bottom of your parser, define a @code{struct language_defn} and initialize it with the right values for your language. Define an @code{initialize_@var{lang}} routine and have it call @samp{add_language(@var{lang}_language_defn)} to tell the rest of @value{GDBN} that your language exists. You'll need some other supporting variables and functions, which will be used via pointers from your @code{@var{lang}_language_defn}. See the declaration of @code{struct language_defn} in @file{language.h}, and the other @file{*-exp.y} files, for more information. @item Add any evaluation routines, if necessary @cindex expression evaluation routines @findex evaluate_subexp @findex prefixify_subexp @findex length_of_subexp If you need new opcodes (that represent the operations of the language), add them to the enumerated type in @file{expression.h}. Add support code for these operations in the @code{evaluate_subexp} function defined in the file @file{eval.c}. Add cases for new opcodes in two functions from @file{parse.c}: @code{prefixify_subexp} and @code{length_of_subexp}. These compute the number of @code{exp_element}s that a given operation takes up. @item Update some existing code Add an enumerated identifier for your language to the enumerated type @code{enum language} in @file{defs.h}. Update the routines in @file{language.c} so your language is included. These routines include type predicates and such, which (in some cases) are language dependent. If your language does not appear in the switch statement, an error is reported. @vindex current_language Also included in @file{language.c} is the code that updates the variable @code{current_language}, and the routines that translate the @code{language_@var{lang}} enumerated identifier into a printable string. @findex _initialize_language Update the function @code{_initialize_language} to include your language. This function picks the default language upon startup, so is dependent upon which languages that @value{GDBN} is built for. @findex allocate_symtab Update @code{allocate_symtab} in @file{symfile.c} and/or symbol-reading code so that the language of each symtab (source file) is set properly. This is used to determine the language to use at each stack frame level. Currently, the language is set based upon the extension of the source file. If the language can be better inferred from the symbol information, please set the language of the symtab in the symbol-reading code. @findex print_subexp @findex op_print_tab Add helper code to @code{print_subexp} (in @file{expprint.c}) to handle any new expression opcodes you have added to @file{expression.h}. Also, add the printed representations of your operators to @code{op_print_tab}. @item Add a place of call @findex parse_exp_1 Add a call to @code{@var{lang}_parse()} and @code{@var{lang}_error} in @code{parse_exp_1} (defined in @file{parse.c}). @item Use macros to trim code @cindex trimming language-dependent code The user has the option of building @value{GDBN} for some or all of the languages. If the user decides to build @value{GDBN} for the language @var{lang}, then every file dependent on @file{language.h} will have the macro @code{_LANG_@var{lang}} defined in it. Use @code{#ifdef}s to leave out large routines that the user won't need if he or she is not using your language. Note that you do not need to do this in your YACC parser, since if @value{GDBN} is not build for @var{lang}, then @file{@var{lang}-exp.tab.o} (the compiled form of your parser) is not linked into @value{GDBN} at all. See the file @file{configure.in} for how @value{GDBN} is configured for different languages. @item Edit @file{Makefile.in} Add dependencies in @file{Makefile.in}. Make sure you update the macro variables such as @code{HFILES} and @code{OBJS}, otherwise your code may not get linked in, or, worse yet, it may not get @code{tar}red into the distribution! @end table @node Host Definition @chapter Host Definition With the advent of Autoconf, it's rarely necessary to have host definition machinery anymore. The following information is provided, mainly, as an historical reference. @section Adding a New Host @cindex adding a new host @cindex host, adding @value{GDBN}'s host configuration support normally happens via Autoconf. New host-specific definitions should not be needed. Older hosts @value{GDBN} still use the host-specific definitions and files listed below, but these mostly exist for historical reasons, and will eventually disappear. @table @file @item gdb/config/@var{arch}/@var{xyz}.mh This file once contained both host and native configuration information (@pxref{Native Debugging}) for the machine @var{xyz}. The host configuration information is now handed by Autoconf. Host configuration information included a definition of @code{XM_FILE=xm-@var{xyz}.h} and possibly definitions for @code{CC}, @code{SYSV_DEFINE}, @code{XM_CFLAGS}, @code{XM_ADD_FILES}, @code{XM_CLIBS}, @code{XM_CDEPS}, etc.; see @file{Makefile.in}. New host only configurations do not need this file. @item gdb/config/@var{arch}/xm-@var{xyz}.h This file once contained definitions and includes required when hosting gdb on machine @var{xyz}. Those definitions and includes are now handled by Autoconf. New host and native configurations do not need this file. @emph{Maintainer's note: Some hosts continue to use the @file{xm-xyz.h} file to define the macros @var{HOST_FLOAT_FORMAT}, @var{HOST_DOUBLE_FORMAT} and @var{HOST_LONG_DOUBLE_FORMAT}. That code also needs to be replaced with either an Autoconf or run-time test.} @end table @subheading Generic Host Support Files @cindex generic host support There are some ``generic'' versions of routines that can be used by various systems. These can be customized in various ways by macros defined in your @file{xm-@var{xyz}.h} file. If these routines work for the @var{xyz} host, you can just include the generic file's name (with @samp{.o}, not @samp{.c}) in @code{XDEPFILES}. Otherwise, if your machine needs custom support routines, you will need to write routines that perform the same functions as the generic file. Put them into @code{@var{xyz}-xdep.c}, and put @code{@var{xyz}-xdep.o} into @code{XDEPFILES}. @table @file @cindex remote debugging support @cindex serial line support @item ser-unix.c This contains serial line support for Unix systems. This is always included, via the makefile variable @code{SER_HARDWIRE}; override this variable in the @file{.mh} file to avoid it. @item ser-go32.c This contains serial line support for 32-bit programs running under DOS, using the DJGPP (a.k.a.@: GO32) execution environment. @cindex TCP remote support @item ser-tcp.c This contains generic TCP support using sockets. @end table @section Host Conditionals When @value{GDBN} is configured and compiled, various macros are defined or left undefined, to control compilation based on the attributes of the host system. These macros and their meanings (or if the meaning is not documented here, then one of the source files where they are used is indicated) are: @ftable @code @item @value{GDBN}INIT_FILENAME The default name of @value{GDBN}'s initialization file (normally @file{.gdbinit}). @item NO_STD_REGS This macro is deprecated. @item SIGWINCH_HANDLER If your host defines @code{SIGWINCH}, you can define this to be the name of a function to be called if @code{SIGWINCH} is received. @item SIGWINCH_HANDLER_BODY Define this to expand into code that will define the function named by the expansion of @code{SIGWINCH_HANDLER}. @item ALIGN_STACK_ON_STARTUP @cindex stack alignment Define this if your system is of a sort that will crash in @code{tgetent} if the stack happens not to be longword-aligned when @code{main} is called. This is a rare situation, but is known to occur on several different types of systems. @item CRLF_SOURCE_FILES @cindex DOS text files Define this if host files use @code{\r\n} rather than @code{\n} as a line terminator. This will cause source file listings to omit @code{\r} characters when printing and it will allow @code{\r\n} line endings of files which are ``sourced'' by gdb. It must be possible to open files in binary mode using @code{O_BINARY} or, for fopen, @code{"rb"}. @item DEFAULT_PROMPT @cindex prompt The default value of the prompt string (normally @code{"(gdb) "}). @item DEV_TTY @cindex terminal device The name of the generic TTY device, defaults to @code{"/dev/tty"}. @item FOPEN_RB Define this if binary files are opened the same way as text files. @item HAVE_MMAP @findex mmap In some cases, use the system call @code{mmap} for reading symbol tables. For some machines this allows for sharing and quick updates. @item HAVE_TERMIO Define this if the host system has @code{termio.h}. @item INT_MAX @itemx INT_MIN @itemx LONG_MAX @itemx UINT_MAX @itemx ULONG_MAX Values for host-side constants. @item ISATTY Substitute for isatty, if not available. @item LONGEST This is the longest integer type available on the host. If not defined, it will default to @code{long long} or @code{long}, depending on @code{CC_HAS_LONG_LONG}. @item CC_HAS_LONG_LONG @cindex @code{long long} data type Define this if the host C compiler supports @code{long long}. This is set by the @code{configure} script. @item PRINTF_HAS_LONG_LONG Define this if the host can handle printing of long long integers via the printf format conversion specifier @code{ll}. This is set by the @code{configure} script. @item HAVE_LONG_DOUBLE Define this if the host C compiler supports @code{long double}. This is set by the @code{configure} script. @item PRINTF_HAS_LONG_DOUBLE Define this if the host can handle printing of long double float-point numbers via the printf format conversion specifier @code{Lg}. This is set by the @code{configure} script. @item SCANF_HAS_LONG_DOUBLE Define this if the host can handle the parsing of long double float-point numbers via the scanf format conversion specifier @code{Lg}. This is set by the @code{configure} script. @item LSEEK_NOT_LINEAR Define this if @code{lseek (n)} does not necessarily move to byte number @code{n} in the file. This is only used when reading source files. It is normally faster to define @code{CRLF_SOURCE_FILES} when possible. @item L_SET This macro is used as the argument to @code{lseek} (or, most commonly, @code{bfd_seek}). FIXME, should be replaced by SEEK_SET instead, which is the POSIX equivalent. @item NORETURN If defined, this should be one or more tokens, such as @code{volatile}, that can be used in both the declaration and definition of functions to indicate that they never return. The default is already set correctly if compiling with GCC. This will almost never need to be defined. @item ATTR_NORETURN If defined, this should be one or more tokens, such as @code{__attribute__ ((noreturn))}, that can be used in the declarations of functions to indicate that they never return. The default is already set correctly if compiling with GCC. This will almost never need to be defined. @item SEEK_CUR @itemx SEEK_SET Define these to appropriate value for the system @code{lseek}, if not already defined. @item STOP_SIGNAL This is the signal for stopping @value{GDBN}. Defaults to @code{SIGTSTP}. (Only redefined for the Convex.) @item USG Means that System V (prior to SVR4) include files are in use. (FIXME: This symbol is abused in @file{infrun.c}, @file{regex.c}, and @file{utils.c} for other things, at the moment.) @item lint Define this to help placate @code{lint} in some situations. @item volatile Define this to override the defaults of @code{__volatile__} or @code{/**/}. @end ftable @node Target Architecture Definition @chapter Target Architecture Definition @cindex target architecture definition @value{GDBN}'s target architecture defines what sort of machine-language programs @value{GDBN} can work with, and how it works with them. The target architecture object is implemented as the C structure @code{struct gdbarch *}. The structure, and its methods, are generated using the Bourne shell script @file{gdbarch.sh}. @section Operating System ABI Variant Handling @cindex OS ABI variants @value{GDBN} provides a mechanism for handling variations in OS ABIs. An OS ABI variant may have influence over any number of variables in the target architecture definition. There are two major components in the OS ABI mechanism: sniffers and handlers. A @dfn{sniffer} examines a file matching a BFD architecture/flavour pair (the architecture may be wildcarded) in an attempt to determine the OS ABI of that file. Sniffers with a wildcarded architecture are considered to be @dfn{generic}, while sniffers for a specific architecture are considered to be @dfn{specific}. A match from a specific sniffer overrides a match from a generic sniffer. Multiple sniffers for an architecture/flavour may exist, in order to differentiate between two different operating systems which use the same basic file format. The OS ABI framework provides a generic sniffer for ELF-format files which examines the @code{EI_OSABI} field of the ELF header, as well as note sections known to be used by several operating systems. @cindex fine-tuning @code{gdbarch} structure A @dfn{handler} is used to fine-tune the @code{gdbarch} structure for the selected OS ABI. There may be only one handler for a given OS ABI for each BFD architecture. The following OS ABI variants are defined in @file{osabi.h}: @table @code @findex GDB_OSABI_UNKNOWN @item GDB_OSABI_UNKNOWN The ABI of the inferior is unknown. The default @code{gdbarch} settings for the architecture will be used. @findex GDB_OSABI_SVR4 @item GDB_OSABI_SVR4 UNIX System V Release 4 @findex GDB_OSABI_HURD @item GDB_OSABI_HURD GNU using the Hurd kernel @findex GDB_OSABI_SOLARIS @item GDB_OSABI_SOLARIS Sun Solaris @findex GDB_OSABI_OSF1 @item GDB_OSABI_OSF1 OSF/1, including Digital UNIX and Compaq Tru64 UNIX @findex GDB_OSABI_LINUX @item GDB_OSABI_LINUX GNU using the Linux kernel @findex GDB_OSABI_FREEBSD_AOUT @item GDB_OSABI_FREEBSD_AOUT FreeBSD using the a.out executable format @findex GDB_OSABI_FREEBSD_ELF @item GDB_OSABI_FREEBSD_ELF FreeBSD using the ELF executable format @findex GDB_OSABI_NETBSD_AOUT @item GDB_OSABI_NETBSD_AOUT NetBSD using the a.out executable format @findex GDB_OSABI_NETBSD_ELF @item GDB_OSABI_NETBSD_ELF NetBSD using the ELF executable format @findex GDB_OSABI_WINCE @item GDB_OSABI_WINCE Windows CE @findex GDB_OSABI_GO32 @item GDB_OSABI_GO32 DJGPP @findex GDB_OSABI_NETWARE @item GDB_OSABI_NETWARE Novell NetWare @findex GDB_OSABI_ARM_EABI_V1 @item GDB_OSABI_ARM_EABI_V1 ARM Embedded ABI version 1 @findex GDB_OSABI_ARM_EABI_V2 @item GDB_OSABI_ARM_EABI_V2 ARM Embedded ABI version 2 @findex GDB_OSABI_ARM_APCS @item GDB_OSABI_ARM_APCS Generic ARM Procedure Call Standard @end table Here are the functions that make up the OS ABI framework: @deftypefun const char *gdbarch_osabi_name (enum gdb_osabi @var{osabi}) Return the name of the OS ABI corresponding to @var{osabi}. @end deftypefun @deftypefun void gdbarch_register_osabi (enum bfd_architecture @var{arch}, unsigned long @var{machine}, enum gdb_osabi @var{osabi}, void (*@var{init_osabi})(struct gdbarch_info @var{info}, struct gdbarch *@var{gdbarch})) Register the OS ABI handler specified by @var{init_osabi} for the architecture, machine type and OS ABI specified by @var{arch}, @var{machine} and @var{osabi}. In most cases, a value of zero for the machine type, which implies the architecture's default machine type, will suffice. @end deftypefun @deftypefun void gdbarch_register_osabi_sniffer (enum bfd_architecture @var{arch}, enum bfd_flavour @var{flavour}, enum gdb_osabi (*@var{sniffer})(bfd *@var{abfd})) Register the OS ABI file sniffer specified by @var{sniffer} for the BFD architecture/flavour pair specified by @var{arch} and @var{flavour}. If @var{arch} is @code{bfd_arch_unknown}, the sniffer is considered to be generic, and is allowed to examine @var{flavour}-flavoured files for any architecture. @end deftypefun @deftypefun enum gdb_osabi gdbarch_lookup_osabi (bfd *@var{abfd}) Examine the file described by @var{abfd} to determine its OS ABI. The value @code{GDB_OSABI_UNKNOWN} is returned if the OS ABI cannot be determined. @end deftypefun @deftypefun void gdbarch_init_osabi (struct gdbarch info @var{info}, struct gdbarch *@var{gdbarch}, enum gdb_osabi @var{osabi}) Invoke the OS ABI handler corresponding to @var{osabi} to fine-tune the @code{gdbarch} structure specified by @var{gdbarch}. If a handler corresponding to @var{osabi} has not been registered for @var{gdbarch}'s architecture, a warning will be issued and the debugging session will continue with the defaults already established for @var{gdbarch}. @end deftypefun @section Registers and Memory @value{GDBN}'s model of the target machine is rather simple. @value{GDBN} assumes the machine includes a bank of registers and a block of memory. Each register may have a different size. @value{GDBN} does not have a magical way to match up with the compiler's idea of which registers are which; however, it is critical that they do match up accurately. The only way to make this work is to get accurate information about the order that the compiler uses, and to reflect that in the @code{REGISTER_NAME} and related macros. @value{GDBN} can handle big-endian, little-endian, and bi-endian architectures. @section Pointers Are Not Always Addresses @cindex pointer representation @cindex address representation @cindex word-addressed machines @cindex separate data and code address spaces @cindex spaces, separate data and code address @cindex address spaces, separate data and code @cindex code pointers, word-addressed @cindex converting between pointers and addresses @cindex D10V addresses On almost all 32-bit architectures, the representation of a pointer is indistinguishable from the representation of some fixed-length number whose value is the byte address of the object pointed to. On such machines, the words ``pointer'' and ``address'' can be used interchangeably. However, architectures with smaller word sizes are often cramped for address space, so they may choose a pointer representation that breaks this identity, and allows a larger code address space. For example, the Renesas D10V is a 16-bit VLIW processor whose instructions are 32 bits long@footnote{Some D10V instructions are actually pairs of 16-bit sub-instructions. However, since you can't jump into the middle of such a pair, code addresses can only refer to full 32 bit instructions, which is what matters in this explanation.}. If the D10V used ordinary byte addresses to refer to code locations, then the processor would only be able to address 64kb of instructions. However, since instructions must be aligned on four-byte boundaries, the low two bits of any valid instruction's byte address are always zero---byte addresses waste two bits. So instead of byte addresses, the D10V uses word addresses---byte addresses shifted right two bits---to refer to code. Thus, the D10V can use 16-bit words to address 256kb of code space. However, this means that code pointers and data pointers have different forms on the D10V. The 16-bit word @code{0xC020} refers to byte address @code{0xC020} when used as a data address, but refers to byte address @code{0x30080} when used as a code address. (The D10V also uses separate code and data address spaces, which also affects the correspondence between pointers and addresses, but we're going to ignore that here; this example is already too long.) To cope with architectures like this---the D10V is not the only one!---@value{GDBN} tries to distinguish between @dfn{addresses}, which are byte numbers, and @dfn{pointers}, which are the target's representation of an address of a particular type of data. In the example above, @code{0xC020} is the pointer, which refers to one of the addresses @code{0xC020} or @code{0x30080}, depending on the type imposed upon it. @value{GDBN} provides functions for turning a pointer into an address and vice versa, in the appropriate way for the current architecture. Unfortunately, since addresses and pointers are identical on almost all processors, this distinction tends to bit-rot pretty quickly. Thus, each time you port @value{GDBN} to an architecture which does distinguish between pointers and addresses, you'll probably need to clean up some architecture-independent code. Here are functions which convert between pointers and addresses: @deftypefun CORE_ADDR extract_typed_address (void *@var{buf}, struct type *@var{type}) Treat the bytes at @var{buf} as a pointer or reference of type @var{type}, and return the address it represents, in a manner appropriate for the current architecture. This yields an address @value{GDBN} can use to read target memory, disassemble, etc. Note that @var{buf} refers to a buffer in @value{GDBN}'s memory, not the inferior's. For example, if the current architecture is the Intel x86, this function extracts a little-endian integer of the appropriate length from @var{buf} and returns it. However, if the current architecture is the D10V, this function will return a 16-bit integer extracted from @var{buf}, multiplied by four if @var{type} is a pointer to a function. If @var{type} is not a pointer or reference type, then this function will signal an internal error. @end deftypefun @deftypefun CORE_ADDR store_typed_address (void *@var{buf}, struct type *@var{type}, CORE_ADDR @var{addr}) Store the address @var{addr} in @var{buf}, in the proper format for a pointer of type @var{type} in the current architecture. Note that @var{buf} refers to a buffer in @value{GDBN}'s memory, not the inferior's. For example, if the current architecture is the Intel x86, this function stores @var{addr} unmodified as a little-endian integer of the appropriate length in @var{buf}. However, if the current architecture is the D10V, this function divides @var{addr} by four if @var{type} is a pointer to a function, and then stores it in @var{buf}. If @var{type} is not a pointer or reference type, then this function will signal an internal error. @end deftypefun @deftypefun CORE_ADDR value_as_address (struct value *@var{val}) Assuming that @var{val} is a pointer, return the address it represents, as appropriate for the current architecture. This function actually works on integral values, as well as pointers. For pointers, it performs architecture-specific conversions as described above for @code{extract_typed_address}. @end deftypefun @deftypefun CORE_ADDR value_from_pointer (struct type *@var{type}, CORE_ADDR @var{addr}) Create and return a value representing a pointer of type @var{type} to the address @var{addr}, as appropriate for the current architecture. This function performs architecture-specific conversions as described above for @code{store_typed_address}. @end deftypefun Here are some macros which architectures can define to indicate the relationship between pointers and addresses. These have default definitions, appropriate for architectures on which all pointers are simple unsigned byte addresses. @deftypefn {Target Macro} CORE_ADDR POINTER_TO_ADDRESS (struct type *@var{type}, char *@var{buf}) Assume that @var{buf} holds a pointer of type @var{type}, in the appropriate format for the current architecture. Return the byte address the pointer refers to. This function may safely assume that @var{type} is either a pointer or a C@t{++} reference type. @end deftypefn @deftypefn {Target Macro} void ADDRESS_TO_POINTER (struct type *@var{type}, char *@var{buf}, CORE_ADDR @var{addr}) Store in @var{buf} a pointer of type @var{type} representing the address @var{addr}, in the appropriate format for the current architecture. This function may safely assume that @var{type} is either a pointer or a C@t{++} reference type. @end deftypefn @section Address Classes @cindex address classes @cindex DW_AT_byte_size @cindex DW_AT_address_class Sometimes information about different kinds of addresses is available via the debug information. For example, some programming environments define addresses of several different sizes. If the debug information distinguishes these kinds of address classes through either the size info (e.g, @code{DW_AT_byte_size} in @w{DWARF 2}) or through an explicit address class attribute (e.g, @code{DW_AT_address_class} in @w{DWARF 2}), the following macros should be defined in order to disambiguate these types within @value{GDBN} as well as provide the added information to a @value{GDBN} user when printing type expressions. @deftypefn {Target Macro} int ADDRESS_CLASS_TYPE_FLAGS (int @var{byte_size}, int @var{dwarf2_addr_class}) Returns the type flags needed to construct a pointer type whose size is @var{byte_size} and whose address class is @var{dwarf2_addr_class}. This function is normally called from within a symbol reader. See @file{dwarf2read.c}. @end deftypefn @deftypefn {Target Macro} char *ADDRESS_CLASS_TYPE_FLAGS_TO_NAME (int @var{type_flags}) Given the type flags representing an address class qualifier, return its name. @end deftypefn @deftypefn {Target Macro} int ADDRESS_CLASS_NAME_to_TYPE_FLAGS (int @var{name}, int *var{type_flags_ptr}) Given an address qualifier name, set the @code{int} refererenced by @var{type_flags_ptr} to the type flags for that address class qualifier. @end deftypefn Since the need for address classes is rather rare, none of the address class macros defined by default. Predicate macros are provided to detect when they are defined. Consider a hypothetical architecture in which addresses are normally 32-bits wide, but 16-bit addresses are also supported. Furthermore, suppose that the @w{DWARF 2} information for this architecture simply uses a @code{DW_AT_byte_size} value of 2 to indicate the use of one of these "short" pointers. The following functions could be defined to implement the address class macros: @smallexample somearch_address_class_type_flags (int byte_size, int dwarf2_addr_class) @{ if (byte_size == 2) return TYPE_FLAG_ADDRESS_CLASS_1; else return 0; @} static char * somearch_address_class_type_flags_to_name (int type_flags) @{ if (type_flags & TYPE_FLAG_ADDRESS_CLASS_1) return "short"; else return NULL; @} int somearch_address_class_name_to_type_flags (char *name, int *type_flags_ptr) @{ if (strcmp (name, "short") == 0) @{ *type_flags_ptr = TYPE_FLAG_ADDRESS_CLASS_1; return 1; @} else return 0; @} @end smallexample The qualifier @code{@@short} is used in @value{GDBN}'s type expressions to indicate the presence of one of these "short" pointers. E.g, if the debug information indicates that @code{short_ptr_var} is one of these short pointers, @value{GDBN} might show the following behavior: @smallexample (gdb) ptype short_ptr_var type = int * @@short @end smallexample @section Raw and Virtual Register Representations @cindex raw register representation @cindex virtual register representation @cindex representations, raw and virtual registers @emph{Maintainer note: This section is pretty much obsolete. The functionality described here has largely been replaced by pseudo-registers and the mechanisms described in @ref{Target Architecture Definition, , Using Different Register and Memory Data Representations}. See also @uref{http://www.gnu.org/software/gdb/bugs/, Bug Tracking Database} and @uref{http://sources.redhat.com/gdb/current/ari/, ARI Index} for more up-to-date information.} Some architectures use one representation for a value when it lives in a register, but use a different representation when it lives in memory. In @value{GDBN}'s terminology, the @dfn{raw} representation is the one used in the target registers, and the @dfn{virtual} representation is the one used in memory, and within @value{GDBN} @code{struct value} objects. @emph{Maintainer note: Notice that the same mechanism is being used to both convert a register to a @code{struct value} and alternative register forms.} For almost all data types on almost all architectures, the virtual and raw representations are identical, and no special handling is needed. However, they do occasionally differ. For example: @itemize @bullet @item The x86 architecture supports an 80-bit @code{long double} type. However, when we store those values in memory, they occupy twelve bytes: the floating-point number occupies the first ten, and the final two bytes are unused. This keeps the values aligned on four-byte boundaries, allowing more efficient access. Thus, the x86 80-bit floating-point type is the raw representation, and the twelve-byte loosely-packed arrangement is the virtual representation. @item Some 64-bit MIPS targets present 32-bit registers to @value{GDBN} as 64-bit registers, with garbage in their upper bits. @value{GDBN} ignores the top 32 bits. Thus, the 64-bit form, with garbage in the upper 32 bits, is the raw representation, and the trimmed 32-bit representation is the virtual representation. @end itemize In general, the raw representation is determined by the architecture, or @value{GDBN}'s interface to the architecture, while the virtual representation can be chosen for @value{GDBN}'s convenience. @value{GDBN}'s register file, @code{registers}, holds the register contents in raw format, and the @value{GDBN} remote protocol transmits register values in raw format. Your architecture may define the following macros to request conversions between the raw and virtual format: @deftypefn {Target Macro} int REGISTER_CONVERTIBLE (int @var{reg}) Return non-zero if register number @var{reg}'s value needs different raw and virtual formats. You should not use @code{REGISTER_CONVERT_TO_VIRTUAL} for a register unless this macro returns a non-zero value for that register. @end deftypefn @deftypefn {Target Macro} int DEPRECATED_REGISTER_RAW_SIZE (int @var{reg}) The size of register number @var{reg}'s raw value. This is the number of bytes the register will occupy in @code{registers}, or in a @value{GDBN} remote protocol packet. @end deftypefn @deftypefn {Target Macro} int DEPRECATED_REGISTER_VIRTUAL_SIZE (int @var{reg}) The size of register number @var{reg}'s value, in its virtual format. This is the size a @code{struct value}'s buffer will have, holding that register's value. @end deftypefn @deftypefn {Target Macro} struct type *DEPRECATED_REGISTER_VIRTUAL_TYPE (int @var{reg}) This is the type of the virtual representation of register number @var{reg}. Note that there is no need for a macro giving a type for the register's raw form; once the register's value has been obtained, @value{GDBN} always uses the virtual form. @end deftypefn @deftypefn {Target Macro} void REGISTER_CONVERT_TO_VIRTUAL (int @var{reg}, struct type *@var{type}, char *@var{from}, char *@var{to}) Convert the value of register number @var{reg} to @var{type}, which should always be @code{DEPRECATED_REGISTER_VIRTUAL_TYPE (@var{reg})}. The buffer at @var{from} holds the register's value in raw format; the macro should convert the value to virtual format, and place it at @var{to}. Note that @code{REGISTER_CONVERT_TO_VIRTUAL} and @code{REGISTER_CONVERT_TO_RAW} take their @var{reg} and @var{type} arguments in different orders. You should only use @code{REGISTER_CONVERT_TO_VIRTUAL} with registers for which the @code{REGISTER_CONVERTIBLE} macro returns a non-zero value. @end deftypefn @deftypefn {Target Macro} void REGISTER_CONVERT_TO_RAW (struct type *@var{type}, int @var{reg}, char *@var{from}, char *@var{to}) Convert the value of register number @var{reg} to @var{type}, which should always be @code{DEPRECATED_REGISTER_VIRTUAL_TYPE (@var{reg})}. The buffer at @var{from} holds the register's value in raw format; the macro should convert the value to virtual format, and place it at @var{to}. Note that REGISTER_CONVERT_TO_VIRTUAL and REGISTER_CONVERT_TO_RAW take their @var{reg} and @var{type} arguments in different orders. @end deftypefn @section Using Different Register and Memory Data Representations @cindex register representation @cindex memory representation @cindex representations, register and memory @cindex register data formats, converting @cindex @code{struct value}, converting register contents to @emph{Maintainer's note: The way GDB manipulates registers is undergoing significant change. Many of the macros and functions refered to in this section are likely to be subject to further revision. See @uref{http://sources.redhat.com/gdb/current/ari/, A.R. Index} and @uref{http://www.gnu.org/software/gdb/bugs, Bug Tracking Database} for further information. cagney/2002-05-06.} Some architectures can represent a data object in a register using a form that is different to the objects more normal memory representation. For example: @itemize @bullet @item The Alpha architecture can represent 32 bit integer values in floating-point registers. @item The x86 architecture supports 80-bit floating-point registers. The @code{long double} data type occupies 96 bits in memory but only 80 bits when stored in a register. @end itemize In general, the register representation of a data type is determined by the architecture, or @value{GDBN}'s interface to the architecture, while the memory representation is determined by the Application Binary Interface. For almost all data types on almost all architectures, the two representations are identical, and no special handling is needed. However, they do occasionally differ. Your architecture may define the following macros to request conversions between the register and memory representations of a data type: @deftypefn {Target Macro} int CONVERT_REGISTER_P (int @var{reg}) Return non-zero if the representation of a data value stored in this register may be different to the representation of that same data value when stored in memory. When non-zero, the macros @code{REGISTER_TO_VALUE} and @code{VALUE_TO_REGISTER} are used to perform any necessary conversion. @end deftypefn @deftypefn {Target Macro} void REGISTER_TO_VALUE (int @var{reg}, struct type *@var{type}, char *@var{from}, char *@var{to}) Convert the value of register number @var{reg} to a data object of type @var{type}. The buffer at @var{from} holds the register's value in raw format; the converted value should be placed in the buffer at @var{to}. Note that @code{REGISTER_TO_VALUE} and @code{VALUE_TO_REGISTER} take their @var{reg} and @var{type} arguments in different orders. You should only use @code{REGISTER_TO_VALUE} with registers for which the @code{CONVERT_REGISTER_P} macro returns a non-zero value. @end deftypefn @deftypefn {Target Macro} void VALUE_TO_REGISTER (struct type *@var{type}, int @var{reg}, char *@var{from}, char *@var{to}) Convert a data value of type @var{type} to register number @var{reg}' raw format. Note that @code{REGISTER_TO_VALUE} and @code{VALUE_TO_REGISTER} take their @var{reg} and @var{type} arguments in different orders. You should only use @code{VALUE_TO_REGISTER} with registers for which the @code{CONVERT_REGISTER_P} macro returns a non-zero value. @end deftypefn @deftypefn {Target Macro} void REGISTER_CONVERT_TO_TYPE (int @var{regnum}, struct type *@var{type}, char *@var{buf}) See @file{mips-tdep.c}. It does not do what you want. @end deftypefn @section Frame Interpretation @section Inferior Call Setup @section Compiler Characteristics @section Target Conditionals This section describes the macros that you can use to define the target machine. @table @code @item ADDR_BITS_REMOVE (addr) @findex ADDR_BITS_REMOVE If a raw machine instruction address includes any bits that are not really part of the address, then define this macro to expand into an expression that zeroes those bits in @var{addr}. This is only used for addresses of instructions, and even then not in all contexts. For example, the two low-order bits of the PC on the Hewlett-Packard PA 2.0 architecture contain the privilege level of the corresponding instruction. Since instructions must always be aligned on four-byte boundaries, the processor masks out these bits to generate the actual address of the instruction. ADDR_BITS_REMOVE should filter out these bits with an expression such as @code{((addr) & ~3)}. @item ADDRESS_CLASS_NAME_TO_TYPE_FLAGS (@var{name}, @var{type_flags_ptr}) @findex ADDRESS_CLASS_NAME_TO_TYPE_FLAGS If @var{name} is a valid address class qualifier name, set the @code{int} referenced by @var{type_flags_ptr} to the mask representing the qualifier and return 1. If @var{name} is not a valid address class qualifier name, return 0. The value for @var{type_flags_ptr} should be one of @code{TYPE_FLAG_ADDRESS_CLASS_1}, @code{TYPE_FLAG_ADDRESS_CLASS_2}, or possibly some combination of these values or'd together. @xref{Target Architecture Definition, , Address Classes}. @item ADDRESS_CLASS_NAME_TO_TYPE_FLAGS_P () @findex ADDRESS_CLASS_NAME_TO_TYPE_FLAGS_P Predicate which indicates whether @code{ADDRESS_CLASS_NAME_TO_TYPE_FLAGS} has been defined. @item ADDRESS_CLASS_TYPE_FLAGS (@var{byte_size}, @var{dwarf2_addr_class}) @findex ADDRESS_CLASS_TYPE_FLAGS (@var{byte_size}, @var{dwarf2_addr_class}) Given a pointers byte size (as described by the debug information) and the possible @code{DW_AT_address_class} value, return the type flags used by @value{GDBN} to represent this address class. The value returned should be one of @code{TYPE_FLAG_ADDRESS_CLASS_1}, @code{TYPE_FLAG_ADDRESS_CLASS_2}, or possibly some combination of these values or'd together. @xref{Target Architecture Definition, , Address Classes}. @item ADDRESS_CLASS_TYPE_FLAGS_P () @findex ADDRESS_CLASS_TYPE_FLAGS_P Predicate which indicates whether @code{ADDRESS_CLASS_TYPE_FLAGS} has been defined. @item ADDRESS_CLASS_TYPE_FLAGS_TO_NAME (@var{type_flags}) @findex ADDRESS_CLASS_TYPE_FLAGS_TO_NAME Return the name of the address class qualifier associated with the type flags given by @var{type_flags}. @item ADDRESS_CLASS_TYPE_FLAGS_TO_NAME_P () @findex ADDRESS_CLASS_TYPE_FLAGS_TO_NAME_P Predicate which indicates whether @code{ADDRESS_CLASS_TYPE_FLAGS_TO_NAME} has been defined. @xref{Target Architecture Definition, , Address Classes}. @item ADDRESS_TO_POINTER (@var{type}, @var{buf}, @var{addr}) @findex ADDRESS_TO_POINTER Store in @var{buf} a pointer of type @var{type} representing the address @var{addr}, in the appropriate format for the current architecture. This macro may safely assume that @var{type} is either a pointer or a C@t{++} reference type. @xref{Target Architecture Definition, , Pointers Are Not Always Addresses}. @item BELIEVE_PCC_PROMOTION @findex BELIEVE_PCC_PROMOTION Define if the compiler promotes a @code{short} or @code{char} parameter to an @code{int}, but still reports the parameter as its original type, rather than the promoted type. @item BITS_BIG_ENDIAN @findex BITS_BIG_ENDIAN Define this if the numbering of bits in the targets does @strong{not} match the endianness of the target byte order. A value of 1 means that the bits are numbered in a big-endian bit order, 0 means little-endian. @item BREAKPOINT @findex BREAKPOINT This is the character array initializer for the bit pattern to put into memory where a breakpoint is set. Although it's common to use a trap instruction for a breakpoint, it's not required; for instance, the bit pattern could be an invalid instruction. The breakpoint must be no longer than the shortest instruction of the architecture. @code{BREAKPOINT} has been deprecated in favor of @code{BREAKPOINT_FROM_PC}. @item BIG_BREAKPOINT @itemx LITTLE_BREAKPOINT @findex LITTLE_BREAKPOINT @findex BIG_BREAKPOINT Similar to BREAKPOINT, but used for bi-endian targets. @code{BIG_BREAKPOINT} and @code{LITTLE_BREAKPOINT} have been deprecated in favor of @code{BREAKPOINT_FROM_PC}. @item DEPRECATED_REMOTE_BREAKPOINT @itemx DEPRECATED_LITTLE_REMOTE_BREAKPOINT @itemx DEPRECATED_BIG_REMOTE_BREAKPOINT @findex DEPRECATED_BIG_REMOTE_BREAKPOINT @findex DEPRECATED_LITTLE_REMOTE_BREAKPOINT @findex DEPRECATED_REMOTE_BREAKPOINT Specify the breakpoint instruction sequence for a remote target. @code{DEPRECATED_REMOTE_BREAKPOINT}, @code{DEPRECATED_BIG_REMOTE_BREAKPOINT} and @code{DEPRECATED_LITTLE_REMOTE_BREAKPOINT} have been deprecated in favor of @code{BREAKPOINT_FROM_PC} (@pxref{BREAKPOINT_FROM_PC}). @item BREAKPOINT_FROM_PC (@var{pcptr}, @var{lenptr}) @findex BREAKPOINT_FROM_PC @anchor{BREAKPOINT_FROM_PC} Use the program counter to determine the contents and size of a breakpoint instruction. It returns a pointer to a string of bytes that encode a breakpoint instruction, stores the length of the string to @code{*@var{lenptr}}, and adjusts the program counter (if necessary) to point to the actual memory location where the breakpoint should be inserted. Although it is common to use a trap instruction for a breakpoint, it's not required; for instance, the bit pattern could be an invalid instruction. The breakpoint must be no longer than the shortest instruction of the architecture. Replaces all the other @var{BREAKPOINT} macros. @item MEMORY_INSERT_BREAKPOINT (@var{addr}, @var{contents_cache}) @itemx MEMORY_REMOVE_BREAKPOINT (@var{addr}, @var{contents_cache}) @findex MEMORY_REMOVE_BREAKPOINT @findex MEMORY_INSERT_BREAKPOINT Insert or remove memory based breakpoints. Reasonable defaults (@code{default_memory_insert_breakpoint} and @code{default_memory_remove_breakpoint} respectively) have been provided so that it is not necessary to define these for most architectures. Architectures which may want to define @code{MEMORY_INSERT_BREAKPOINT} and @code{MEMORY_REMOVE_BREAKPOINT} will likely have instructions that are oddly sized or are not stored in a conventional manner. It may also be desirable (from an efficiency standpoint) to define custom breakpoint insertion and removal routines if @code{BREAKPOINT_FROM_PC} needs to read the target's memory for some reason. @item ADJUST_BREAKPOINT_ADDRESS (@var{address}) @findex ADJUST_BREAKPOINT_ADDRESS @cindex breakpoint address adjusted Given an address at which a breakpoint is desired, return a breakpoint address adjusted to account for architectural constraints on breakpoint placement. This method is not needed by most targets. The FR-V target (see @file{frv-tdep.c}) requires this method. The FR-V is a VLIW architecture in which a number of RISC-like instructions are grouped (packed) together into an aggregate instruction or instruction bundle. When the processor executes one of these bundles, the component instructions are executed in parallel. In the course of optimization, the compiler may group instructions from distinct source statements into the same bundle. The line number information associated with one of the latter statements will likely refer to some instruction other than the first one in the bundle. So, if the user attempts to place a breakpoint on one of these latter statements, @value{GDBN} must be careful to @emph{not} place the break instruction on any instruction other than the first one in the bundle. (Remember though that the instructions within a bundle execute in parallel, so the @emph{first} instruction is the instruction at the lowest address and has nothing to do with execution order.) The FR-V's @code{ADJUST_BREAKPOINT_ADDRESS} method will adjust a breakpoint's address by scanning backwards for the beginning of the bundle, returning the address of the bundle. Since the adjustment of a breakpoint may significantly alter a user's expectation, @value{GDBN} prints a warning when an adjusted breakpoint is initially set and each time that that breakpoint is hit. @item CALL_DUMMY_LOCATION @findex CALL_DUMMY_LOCATION See the file @file{inferior.h}. This method has been replaced by @code{push_dummy_code} (@pxref{push_dummy_code}). @item CANNOT_FETCH_REGISTER (@var{regno}) @findex CANNOT_FETCH_REGISTER A C expression that should be nonzero if @var{regno} cannot be fetched from an inferior process. This is only relevant if @code{FETCH_INFERIOR_REGISTERS} is not defined. @item CANNOT_STORE_REGISTER (@var{regno}) @findex CANNOT_STORE_REGISTER A C expression that should be nonzero if @var{regno} should not be written to the target. This is often the case for program counters, status words, and other special registers. If this is not defined, @value{GDBN} will assume that all registers may be written. @item int CONVERT_REGISTER_P(@var{regnum}) @findex CONVERT_REGISTER_P Return non-zero if register @var{regnum} can represent data values in a non-standard form. @xref{Target Architecture Definition, , Using Different Register and Memory Data Representations}. @item DECR_PC_AFTER_BREAK @findex DECR_PC_AFTER_BREAK Define this to be the amount by which to decrement the PC after the program encounters a breakpoint. This is often the number of bytes in @code{BREAKPOINT}, though not always. For most targets this value will be 0. @item DISABLE_UNSETTABLE_BREAK (@var{addr}) @findex DISABLE_UNSETTABLE_BREAK If defined, this should evaluate to 1 if @var{addr} is in a shared library in which breakpoints cannot be set and so should be disabled. @item PRINT_FLOAT_INFO() @findex PRINT_FLOAT_INFO If defined, then the @samp{info float} command will print information about the processor's floating point unit. @item print_registers_info (@var{gdbarch}, @var{frame}, @var{regnum}, @var{all}) @findex print_registers_info If defined, pretty print the value of the register @var{regnum} for the specified @var{frame}. If the value of @var{regnum} is -1, pretty print either all registers (@var{all} is non zero) or a select subset of registers (@var{all} is zero). The default method prints one register per line, and if @var{all} is zero omits floating-point registers. @item PRINT_VECTOR_INFO() @findex PRINT_VECTOR_INFO If defined, then the @samp{info vector} command will call this function to print information about the processor's vector unit. By default, the @samp{info vector} command will print all vector registers (the register's type having the vector attribute). @item DWARF_REG_TO_REGNUM @findex DWARF_REG_TO_REGNUM Convert DWARF register number into @value{GDBN} regnum. If not defined, no conversion will be performed. @item DWARF2_REG_TO_REGNUM @findex DWARF2_REG_TO_REGNUM Convert DWARF2 register number into @value{GDBN} regnum. If not defined, no conversion will be performed. @item ECOFF_REG_TO_REGNUM @findex ECOFF_REG_TO_REGNUM Convert ECOFF register number into @value{GDBN} regnum. If not defined, no conversion will be performed. @item END_OF_TEXT_DEFAULT @findex END_OF_TEXT_DEFAULT This is an expression that should designate the end of the text section. @c (? FIXME ?) @item EXTRACT_RETURN_VALUE(@var{type}, @var{regbuf}, @var{valbuf}) @findex EXTRACT_RETURN_VALUE Define this to extract a function's return value of type @var{type} from the raw register state @var{regbuf} and copy that, in virtual format, into @var{valbuf}. This method has been deprecated in favour of @code{gdbarch_return_value} (@pxref{gdbarch_return_value}). @item DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS(@var{regbuf}) @findex DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS @anchor{DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS} When defined, extract from the array @var{regbuf} (containing the raw register state) the @code{CORE_ADDR} at which a function should return its structure value. @xref{gdbarch_return_value}. @item DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS_P() @findex DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS_P Predicate for @code{DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS}. @item DEPRECATED_FP_REGNUM @findex DEPRECATED_FP_REGNUM If the virtual frame pointer is kept in a register, then define this macro to be the number (greater than or equal to zero) of that register. This should only need to be defined if @code{DEPRECATED_TARGET_READ_FP} is not defined. @item DEPRECATED_FRAMELESS_FUNCTION_INVOCATION(@var{fi}) @findex DEPRECATED_FRAMELESS_FUNCTION_INVOCATION Define this to an expression that returns 1 if the function invocation represented by @var{fi} does not have a stack frame associated with it. Otherwise return 0. @item frame_align (@var{address}) @anchor{frame_align} @findex frame_align Define this to adjust @var{address} so that it meets the alignment requirements for the start of a new stack frame. A stack frame's alignment requirements are typically stronger than a target processors stack alignment requirements (@pxref{DEPRECATED_STACK_ALIGN}). This function is used to ensure that, when creating a dummy frame, both the initial stack pointer and (if needed) the address of the return value are correctly aligned. Unlike @code{DEPRECATED_STACK_ALIGN}, this function always adjusts the address in the direction of stack growth. By default, no frame based stack alignment is performed. @item int frame_red_zone_size The number of bytes, beyond the innermost-stack-address, reserved by the @sc{abi}. A function is permitted to use this scratch area (instead of allocating extra stack space). When performing an inferior function call, to ensure that it does not modify this area, @value{GDBN} adjusts the innermost-stack-address by @var{frame_red_zone_size} bytes before pushing parameters onto the stack. By default, zero bytes are allocated. The value must be aligned (@pxref{frame_align}). The @sc{amd64} (nee x86-64) @sc{abi} documentation refers to the @emph{red zone} when describing this scratch area. @cindex red zone @item DEPRECATED_FRAME_CHAIN(@var{frame}) @findex DEPRECATED_FRAME_CHAIN Given @var{frame}, return a pointer to the calling frame. @item DEPRECATED_FRAME_CHAIN_VALID(@var{chain}, @var{thisframe}) @findex DEPRECATED_FRAME_CHAIN_VALID Define this to be an expression that returns zero if the given frame is an outermost frame, with no caller, and nonzero otherwise. Most normal situations can be handled without defining this macro, including @code{NULL} chain pointers, dummy frames, and frames whose PC values are inside the startup file (e.g.@: @file{crt0.o}), inside @code{main}, or inside @code{_start}. @item DEPRECATED_FRAME_INIT_SAVED_REGS(@var{frame}) @findex DEPRECATED_FRAME_INIT_SAVED_REGS See @file{frame.h}. Determines the address of all registers in the current stack frame storing each in @code{frame->saved_regs}. Space for @code{frame->saved_regs} shall be allocated by @code{DEPRECATED_FRAME_INIT_SAVED_REGS} using @code{frame_saved_regs_zalloc}. @code{FRAME_FIND_SAVED_REGS} is deprecated. @item FRAME_NUM_ARGS (@var{fi}) @findex FRAME_NUM_ARGS For the frame described by @var{fi} return the number of arguments that are being passed. If the number of arguments is not known, return @code{-1}. @item DEPRECATED_FRAME_SAVED_PC(@var{frame}) @findex DEPRECATED_FRAME_SAVED_PC @anchor{DEPRECATED_FRAME_SAVED_PC} Given @var{frame}, return the pc saved there. This is the return address. This method is deprecated. @xref{unwind_pc}. @item CORE_ADDR unwind_pc (struct frame_info *@var{this_frame}) @findex unwind_pc @anchor{unwind_pc} Return the instruction address, in @var{this_frame}'s caller, at which execution will resume after @var{this_frame} returns. This is commonly refered to as the return address. The implementation, which must be frame agnostic (work with any frame), is typically no more than: @smallexample ULONGEST pc; frame_unwind_unsigned_register (this_frame, D10V_PC_REGNUM, &pc); return d10v_make_iaddr (pc); @end smallexample @noindent @xref{DEPRECATED_FRAME_SAVED_PC}, which this method replaces. @item CORE_ADDR unwind_sp (struct frame_info *@var{this_frame}) @findex unwind_sp @anchor{unwind_sp} Return the frame's inner most stack address. This is commonly refered to as the frame's @dfn{stack pointer}. The implementation, which must be frame agnostic (work with any frame), is typically no more than: @smallexample ULONGEST sp; frame_unwind_unsigned_register (this_frame, D10V_SP_REGNUM, &sp); return d10v_make_daddr (sp); @end smallexample @noindent @xref{TARGET_READ_SP}, which this method replaces. @item FUNCTION_EPILOGUE_SIZE @findex FUNCTION_EPILOGUE_SIZE For some COFF targets, the @code{x_sym.x_misc.x_fsize} field of the function end symbol is 0. For such targets, you must define @code{FUNCTION_EPILOGUE_SIZE} to expand into the standard size of a function's epilogue. @item DEPRECATED_FUNCTION_START_OFFSET @findex DEPRECATED_FUNCTION_START_OFFSET An integer, giving the offset in bytes from a function's address (as used in the values of symbols, function pointers, etc.), and the function's first genuine instruction. This is zero on almost all machines: the function's address is usually the address of its first instruction. However, on the VAX, for example, each function starts with two bytes containing a bitmask indicating which registers to save upon entry to the function. The VAX @code{call} instructions check this value, and save the appropriate registers automatically. Thus, since the offset from the function's address to its first instruction is two bytes, @code{DEPRECATED_FUNCTION_START_OFFSET} would be 2 on the VAX. @item GCC_COMPILED_FLAG_SYMBOL @itemx GCC2_COMPILED_FLAG_SYMBOL @findex GCC2_COMPILED_FLAG_SYMBOL @findex GCC_COMPILED_FLAG_SYMBOL If defined, these are the names of the symbols that @value{GDBN} will look for to detect that GCC compiled the file. The default symbols are @code{gcc_compiled.} and @code{gcc2_compiled.}, respectively. (Currently only defined for the Delta 68.) @item @value{GDBN}_MULTI_ARCH @findex @value{GDBN}_MULTI_ARCH If defined and non-zero, enables support for multiple architectures within @value{GDBN}. This support can be enabled at two levels. At level one, only definitions for previously undefined macros are provided; at level two, a multi-arch definition of all architecture dependent macros will be defined. @item @value{GDBN}_TARGET_IS_HPPA @findex @value{GDBN}_TARGET_IS_HPPA This determines whether horrible kludge code in @file{dbxread.c} and @file{partial-stab.h} is used to mangle multiple-symbol-table files from HPPA's. This should all be ripped out, and a scheme like @file{elfread.c} used instead. @item GET_LONGJMP_TARGET @findex GET_LONGJMP_TARGET For most machines, this is a target-dependent parameter. On the DECstation and the Iris, this is a native-dependent parameter, since the header file @file{setjmp.h} is needed to define it. This macro determines the target PC address that @code{longjmp} will jump to, assuming that we have just stopped at a @code{longjmp} breakpoint. It takes a @code{CORE_ADDR *} as argument, and stores the target PC value through this pointer. It examines the current state of the machine as needed. @item DEPRECATED_GET_SAVED_REGISTER @findex DEPRECATED_GET_SAVED_REGISTER Define this if you need to supply your own definition for the function @code{DEPRECATED_GET_SAVED_REGISTER}. @item DEPRECATED_IBM6000_TARGET @findex DEPRECATED_IBM6000_TARGET Shows that we are configured for an IBM RS/6000 system. This conditional should be eliminated (FIXME) and replaced by feature-specific macros. It was introduced in a haste and we are repenting at leisure. @item I386_USE_GENERIC_WATCHPOINTS An x86-based target can define this to use the generic x86 watchpoint support; see @ref{Algorithms, I386_USE_GENERIC_WATCHPOINTS}. @item SYMBOLS_CAN_START_WITH_DOLLAR @findex SYMBOLS_CAN_START_WITH_DOLLAR Some systems have routines whose names start with @samp{$}. Giving this macro a non-zero value tells @value{GDBN}'s expression parser to check for such routines when parsing tokens that begin with @samp{$}. On HP-UX, certain system routines (millicode) have names beginning with @samp{$} or @samp{$$}. For example, @code{$$dyncall} is a millicode routine that handles inter-space procedure calls on PA-RISC. @item DEPRECATED_INIT_EXTRA_FRAME_INFO (@var{fromleaf}, @var{frame}) @findex DEPRECATED_INIT_EXTRA_FRAME_INFO If additional information about the frame is required this should be stored in @code{frame->extra_info}. Space for @code{frame->extra_info} is allocated using @code{frame_extra_info_zalloc}. @item DEPRECATED_INIT_FRAME_PC (@var{fromleaf}, @var{prev}) @findex DEPRECATED_INIT_FRAME_PC This is a C statement that sets the pc of the frame pointed to by @var{prev}. [By default...] @item INNER_THAN (@var{lhs}, @var{rhs}) @findex INNER_THAN Returns non-zero if stack address @var{lhs} is inner than (nearer to the stack top) stack address @var{rhs}. Define this as @code{lhs < rhs} if the target's stack grows downward in memory, or @code{lhs > rsh} if the stack grows upward. @item gdbarch_in_function_epilogue_p (@var{gdbarch}, @var{pc}) @findex gdbarch_in_function_epilogue_p Returns non-zero if the given @var{pc} is in the epilogue of a function. The epilogue of a function is defined as the part of a function where the stack frame of the function already has been destroyed up to the final `return from function call' instruction. @item DEPRECATED_SIGTRAMP_START (@var{pc}) @findex DEPRECATED_SIGTRAMP_START @itemx DEPRECATED_SIGTRAMP_END (@var{pc}) @findex DEPRECATED_SIGTRAMP_END Define these to be the start and end address of the @code{sigtramp} for the given @var{pc}. On machines where the address is just a compile time constant, the macro expansion will typically just ignore the supplied @var{pc}. @item IN_SOLIB_CALL_TRAMPOLINE (@var{pc}, @var{name}) @findex IN_SOLIB_CALL_TRAMPOLINE Define this to evaluate to nonzero if the program is stopped in the trampoline that connects to a shared library. @item IN_SOLIB_RETURN_TRAMPOLINE (@var{pc}, @var{name}) @findex IN_SOLIB_RETURN_TRAMPOLINE Define this to evaluate to nonzero if the program is stopped in the trampoline that returns from a shared library. @item IN_SOLIB_DYNSYM_RESOLVE_CODE (@var{pc}) @findex IN_SOLIB_DYNSYM_RESOLVE_CODE Define this to evaluate to nonzero if the program is stopped in the dynamic linker. @item SKIP_SOLIB_RESOLVER (@var{pc}) @findex SKIP_SOLIB_RESOLVER Define this to evaluate to the (nonzero) address at which execution should continue to get past the dynamic linker's symbol resolution function. A zero value indicates that it is not important or necessary to set a breakpoint to get through the dynamic linker and that single stepping will suffice. @item INTEGER_TO_ADDRESS (@var{type}, @var{buf}) @findex INTEGER_TO_ADDRESS @cindex converting integers to addresses Define this when the architecture needs to handle non-pointer to address conversions specially. Converts that value to an address according to the current architectures conventions. @emph{Pragmatics: When the user copies a well defined expression from their source code and passes it, as a parameter, to @value{GDBN}'s @code{print} command, they should get the same value as would have been computed by the target program. Any deviation from this rule can cause major confusion and annoyance, and needs to be justified carefully. In other words, @value{GDBN} doesn't really have the freedom to do these conversions in clever and useful ways. It has, however, been pointed out that users aren't complaining about how @value{GDBN} casts integers to pointers; they are complaining that they can't take an address from a disassembly listing and give it to @code{x/i}. Adding an architecture method like @code{INTEGER_TO_ADDRESS} certainly makes it possible for @value{GDBN} to ``get it right'' in all circumstances.} @xref{Target Architecture Definition, , Pointers Are Not Always Addresses}. @item NO_HIF_SUPPORT @findex NO_HIF_SUPPORT (Specific to the a29k.) @item POINTER_TO_ADDRESS (@var{type}, @var{buf}) @findex POINTER_TO_ADDRESS Assume that @var{buf} holds a pointer of type @var{type}, in the appropriate format for the current architecture. Return the byte address the pointer refers to. @xref{Target Architecture Definition, , Pointers Are Not Always Addresses}. @item REGISTER_CONVERTIBLE (@var{reg}) @findex REGISTER_CONVERTIBLE Return non-zero if @var{reg} uses different raw and virtual formats. @xref{Target Architecture Definition, , Raw and Virtual Register Representations}. @item REGISTER_TO_VALUE(@var{regnum}, @var{type}, @var{from}, @var{to}) @findex REGISTER_TO_VALUE Convert the raw contents of register @var{regnum} into a value of type @var{type}. @xref{Target Architecture Definition, , Using Different Register and Memory Data Representations}. @item DEPRECATED_REGISTER_RAW_SIZE (@var{reg}) @findex DEPRECATED_REGISTER_RAW_SIZE Return the raw size of @var{reg}; defaults to the size of the register's virtual type. @xref{Target Architecture Definition, , Raw and Virtual Register Representations}. @item register_reggroup_p (@var{gdbarch}, @var{regnum}, @var{reggroup}) @findex register_reggroup_p @cindex register groups Return non-zero if register @var{regnum} is a member of the register group @var{reggroup}. By default, registers are grouped as follows: @table @code @item float_reggroup Any register with a valid name and a floating-point type. @item vector_reggroup Any register with a valid name and a vector type. @item general_reggroup Any register with a valid name and a type other than vector or floating-point. @samp{float_reggroup}. @item save_reggroup @itemx restore_reggroup @itemx all_reggroup Any register with a valid name. @end table @item DEPRECATED_REGISTER_VIRTUAL_SIZE (@var{reg}) @findex DEPRECATED_REGISTER_VIRTUAL_SIZE Return the virtual size of @var{reg}; defaults to the size of the register's virtual type. Return the virtual size of @var{reg}. @xref{Target Architecture Definition, , Raw and Virtual Register Representations}. @item DEPRECATED_REGISTER_VIRTUAL_TYPE (@var{reg}) @findex REGISTER_VIRTUAL_TYPE Return the virtual type of @var{reg}. @xref{Target Architecture Definition, , Raw and Virtual Register Representations}. @item struct type *register_type (@var{gdbarch}, @var{reg}) @findex register_type If defined, return the type of register @var{reg}. This function superseeds @code{DEPRECATED_REGISTER_VIRTUAL_TYPE}. @xref{Target Architecture Definition, , Raw and Virtual Register Representations}. @item REGISTER_CONVERT_TO_VIRTUAL(@var{reg}, @var{type}, @var{from}, @var{to}) @findex REGISTER_CONVERT_TO_VIRTUAL Convert the value of register @var{reg} from its raw form to its virtual form. @xref{Target Architecture Definition, , Raw and Virtual Register Representations}. @item REGISTER_CONVERT_TO_RAW(@var{type}, @var{reg}, @var{from}, @var{to}) @findex REGISTER_CONVERT_TO_RAW Convert the value of register @var{reg} from its virtual form to its raw form. @xref{Target Architecture Definition, , Raw and Virtual Register Representations}. @item const struct regset *regset_from_core_section (struct gdbarch * @var{gdbarch}, const char * @var{sect_name}, size_t @var{sect_size}) @findex regset_from_core_section Return the appropriate register set for a core file section with name @var{sect_name} and size @var{sect_size}. @item SOFTWARE_SINGLE_STEP_P() @findex SOFTWARE_SINGLE_STEP_P Define this as 1 if the target does not have a hardware single-step mechanism. The macro @code{SOFTWARE_SINGLE_STEP} must also be defined. @item SOFTWARE_SINGLE_STEP(@var{signal}, @var{insert_breapoints_p}) @findex SOFTWARE_SINGLE_STEP A function that inserts or removes (depending on @var{insert_breapoints_p}) breakpoints at each possible destinations of the next instruction. See @file{sparc-tdep.c} and @file{rs6000-tdep.c} for examples. @item SOFUN_ADDRESS_MAYBE_MISSING @findex SOFUN_ADDRESS_MAYBE_MISSING Somebody clever observed that, the more actual addresses you have in the debug information, the more time the linker has to spend relocating them. So whenever there's some other way the debugger could find the address it needs, you should omit it from the debug info, to make linking faster. @code{SOFUN_ADDRESS_MAYBE_MISSING} indicates that a particular set of hacks of this sort are in use, affecting @code{N_SO} and @code{N_FUN} entries in stabs-format debugging information. @code{N_SO} stabs mark the beginning and ending addresses of compilation units in the text segment. @code{N_FUN} stabs mark the starts and ends of functions. @code{SOFUN_ADDRESS_MAYBE_MISSING} means two things: @itemize @bullet @item @code{N_FUN} stabs have an address of zero. Instead, you should find the addresses where the function starts by taking the function name from the stab, and then looking that up in the minsyms (the linker/assembler symbol table). In other words, the stab has the name, and the linker/assembler symbol table is the only place that carries the address. @item @code{N_SO} stabs have an address of zero, too. You just look at the @code{N_FUN} stabs that appear before and after the @code{N_SO} stab, and guess the starting and ending addresses of the compilation unit from them. @end itemize @item PC_LOAD_SEGMENT @findex PC_LOAD_SEGMENT If defined, print information about the load segment for the program counter. (Defined only for the RS/6000.) @item PC_REGNUM @findex PC_REGNUM If the program counter is kept in a register, then define this macro to be the number (greater than or equal to zero) of that register. This should only need to be defined if @code{TARGET_READ_PC} and @code{TARGET_WRITE_PC} are not defined. @item PARM_BOUNDARY @findex PARM_BOUNDARY If non-zero, round arguments to a boundary of this many bits before pushing them on the stack. @item stabs_argument_has_addr (@var{gdbarch}, @var{type}) @findex stabs_argument_has_addr @findex DEPRECATED_REG_STRUCT_HAS_ADDR @anchor{stabs_argument_has_addr} Define this to return nonzero if a function argument of type @var{type} is passed by reference instead of value. This method replaces @code{DEPRECATED_REG_STRUCT_HAS_ADDR} (@pxref{DEPRECATED_REG_STRUCT_HAS_ADDR}). @item PROCESS_LINENUMBER_HOOK @findex PROCESS_LINENUMBER_HOOK A hook defined for XCOFF reading. @item PROLOGUE_FIRSTLINE_OVERLAP @findex PROLOGUE_FIRSTLINE_OVERLAP (Only used in unsupported Convex configuration.) @item PS_REGNUM @findex PS_REGNUM If defined, this is the number of the processor status register. (This definition is only used in generic code when parsing "$ps".) @item DEPRECATED_POP_FRAME @findex DEPRECATED_POP_FRAME @findex frame_pop If defined, used by @code{frame_pop} to remove a stack frame. This method has been superseeded by generic code. @item push_dummy_call (@var{gdbarch}, @var{function}, @var{regcache}, @var{pc_addr}, @var{nargs}, @var{args}, @var{sp}, @var{struct_return}, @var{struct_addr}) @findex push_dummy_call @findex DEPRECATED_PUSH_ARGUMENTS. @anchor{push_dummy_call} Define this to push the dummy frame's call to the inferior function onto the stack. In addition to pushing @var{nargs}, the code should push @var{struct_addr} (when @var{struct_return}), and the return address (@var{bp_addr}). @var{function} is a pointer to a @code{struct value}; on architectures that use function descriptors, this contains the function descriptor value. Returns the updated top-of-stack pointer. This method replaces @code{DEPRECATED_PUSH_ARGUMENTS}. @item CORE_ADDR push_dummy_code (@var{gdbarch}, @var{sp}, @var{funaddr}, @var{using_gcc}, @var{args}, @var{nargs}, @var{value_type}, @var{real_pc}, @var{bp_addr}) @findex push_dummy_code @anchor{push_dummy_code} Given a stack based call dummy, push the instruction sequence (including space for a breakpoint) to which the called function should return. Set @var{bp_addr} to the address at which the breakpoint instruction should be inserted, @var{real_pc} to the resume address when starting the call sequence, and return the updated inner-most stack address. By default, the stack is grown sufficient to hold a frame-aligned (@pxref{frame_align}) breakpoint, @var{bp_addr} is set to the address reserved for that breakpoint, and @var{real_pc} set to @var{funaddr}. This method replaces @code{CALL_DUMMY_LOCATION}, @code{DEPRECATED_REGISTER_SIZE}. @item REGISTER_NAME(@var{i}) @findex REGISTER_NAME Return the name of register @var{i} as a string. May return @code{NULL} or @code{NUL} to indicate that register @var{i} is not valid. @item DEPRECATED_REG_STRUCT_HAS_ADDR (@var{gcc_p}, @var{type}) @findex DEPRECATED_REG_STRUCT_HAS_ADDR @anchor{DEPRECATED_REG_STRUCT_HAS_ADDR}Define this to return 1 if the given type will be passed by pointer rather than directly. This method has been replaced by @code{stabs_argument_has_addr} (@pxref{stabs_argument_has_addr}). @item SAVE_DUMMY_FRAME_TOS (@var{sp}) @findex SAVE_DUMMY_FRAME_TOS @anchor{SAVE_DUMMY_FRAME_TOS} Used in @samp{call_function_by_hand} to notify the target dependent code of the top-of-stack value that will be passed to the the inferior code. This is the value of the @code{SP} after both the dummy frame and space for parameters/results have been allocated on the stack. @xref{unwind_dummy_id}. @item SDB_REG_TO_REGNUM @findex SDB_REG_TO_REGNUM Define this to convert sdb register numbers into @value{GDBN} regnums. If not defined, no conversion will be done. @item enum return_value_convention gdbarch_return_value (struct gdbarch *@var{gdbarch}, struct type *@var{valtype}, struct regcache *@var{regcache}, void *@var{readbuf}, const void *@var{writebuf}) @findex gdbarch_return_value @anchor{gdbarch_return_value} Given a function with a return-value of type @var{rettype}, return which return-value convention that function would use. @value{GDBN} currently recognizes two function return-value conventions: @code{RETURN_VALUE_REGISTER_CONVENTION} where the return value is found in registers; and @code{RETURN_VALUE_STRUCT_CONVENTION} where the return value is found in memory and the address of that memory location is passed in as the function's first parameter. If the register convention is being used, and @var{writebuf} is non-@code{NULL}, also copy the return-value in @var{writebuf} into @var{regcache}. If the register convention is being used, and @var{readbuf} is non-@code{NULL}, also copy the return value from @var{regcache} into @var{readbuf} (@var{regcache} contains a copy of the registers from the just returned function). @xref{DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS}, for a description of how return-values that use the struct convention are handled. @emph{Maintainer note: This method replaces separate predicate, extract, store methods. By having only one method, the logic needed to determine the return-value convention need only be implemented in one place. If @value{GDBN} were written in an @sc{oo} language, this method would instead return an object that knew how to perform the register return-value extract and store.} @emph{Maintainer note: This method does not take a @var{gcc_p} parameter, and such a parameter should not be added. If an architecture that requires per-compiler or per-function information be identified, then the replacement of @var{rettype} with @code{struct value} @var{function} should be persued.} @emph{Maintainer note: The @var{regcache} parameter limits this methods to the inner most frame. While replacing @var{regcache} with a @code{struct frame_info} @var{frame} parameter would remove that limitation there has yet to be a demonstrated need for such a change.} @item SKIP_PERMANENT_BREAKPOINT @findex SKIP_PERMANENT_BREAKPOINT Advance the inferior's PC past a permanent breakpoint. @value{GDBN} normally steps over a breakpoint by removing it, stepping one instruction, and re-inserting the breakpoint. However, permanent breakpoints are hardwired into the inferior, and can't be removed, so this strategy doesn't work. Calling @code{SKIP_PERMANENT_BREAKPOINT} adjusts the processor's state so that execution will resume just after the breakpoint. This macro does the right thing even when the breakpoint is in the delay slot of a branch or jump. @item SKIP_PROLOGUE (@var{pc}) @findex SKIP_PROLOGUE A C expression that returns the address of the ``real'' code beyond the function entry prologue found at @var{pc}. @item SKIP_TRAMPOLINE_CODE (@var{pc}) @findex SKIP_TRAMPOLINE_CODE If the target machine has trampoline code that sits between callers and the functions being called, then define this macro to return a new PC that is at the start of the real function. @item SP_REGNUM @findex SP_REGNUM If the stack-pointer is kept in a register, then define this macro to be the number (greater than or equal to zero) of that register, or -1 if there is no such register. @item STAB_REG_TO_REGNUM @findex STAB_REG_TO_REGNUM Define this to convert stab register numbers (as gotten from `r' declarations) into @value{GDBN} regnums. If not defined, no conversion will be done. @item DEPRECATED_STACK_ALIGN (@var{addr}) @anchor{DEPRECATED_STACK_ALIGN} @findex DEPRECATED_STACK_ALIGN Define this to increase @var{addr} so that it meets the alignment requirements for the processor's stack. Unlike @ref{frame_align}, this function always adjusts @var{addr} upwards. By default, no stack alignment is performed. @item STEP_SKIPS_DELAY (@var{addr}) @findex STEP_SKIPS_DELAY Define this to return true if the address is of an instruction with a delay slot. If a breakpoint has been placed in the instruction's delay slot, @value{GDBN} will single-step over that instruction before resuming normally. Currently only defined for the Mips. @item STORE_RETURN_VALUE (@var{type}, @var{regcache}, @var{valbuf}) @findex STORE_RETURN_VALUE A C expression that writes the function return value, found in @var{valbuf}, into the @var{regcache}. @var{type} is the type of the value that is to be returned. This method has been deprecated in favour of @code{gdbarch_return_value} (@pxref{gdbarch_return_value}). @item SYMBOL_RELOADING_DEFAULT @findex SYMBOL_RELOADING_DEFAULT The default value of the ``symbol-reloading'' variable. (Never defined in current sources.) @item TARGET_CHAR_BIT @findex TARGET_CHAR_BIT Number of bits in a char; defaults to 8. @item TARGET_CHAR_SIGNED @findex TARGET_CHAR_SIGNED Non-zero if @code{char} is normally signed on this architecture; zero if it should be unsigned. The ISO C standard requires the compiler to treat @code{char} as equivalent to either @code{signed char} or @code{unsigned char}; any character in the standard execution set is supposed to be positive. Most compilers treat @code{char} as signed, but @code{char} is unsigned on the IBM S/390, RS6000, and PowerPC targets. @item TARGET_COMPLEX_BIT @findex TARGET_COMPLEX_BIT Number of bits in a complex number; defaults to @code{2 * TARGET_FLOAT_BIT}. At present this macro is not used. @item TARGET_DOUBLE_BIT @findex TARGET_DOUBLE_BIT Number of bits in a double float; defaults to @code{8 * TARGET_CHAR_BIT}. @item TARGET_DOUBLE_COMPLEX_BIT @findex TARGET_DOUBLE_COMPLEX_BIT Number of bits in a double complex; defaults to @code{2 * TARGET_DOUBLE_BIT}. At present this macro is not used. @item TARGET_FLOAT_BIT @findex TARGET_FLOAT_BIT Number of bits in a float; defaults to @code{4 * TARGET_CHAR_BIT}. @item TARGET_INT_BIT @findex TARGET_INT_BIT Number of bits in an integer; defaults to @code{4 * TARGET_CHAR_BIT}. @item TARGET_LONG_BIT @findex TARGET_LONG_BIT Number of bits in a long integer; defaults to @code{4 * TARGET_CHAR_BIT}. @item TARGET_LONG_DOUBLE_BIT @findex TARGET_LONG_DOUBLE_BIT Number of bits in a long double float; defaults to @code{2 * TARGET_DOUBLE_BIT}. @item TARGET_LONG_LONG_BIT @findex TARGET_LONG_LONG_BIT Number of bits in a long long integer; defaults to @code{2 * TARGET_LONG_BIT}. @item TARGET_PTR_BIT @findex TARGET_PTR_BIT Number of bits in a pointer; defaults to @code{TARGET_INT_BIT}. @item TARGET_SHORT_BIT @findex TARGET_SHORT_BIT Number of bits in a short integer; defaults to @code{2 * TARGET_CHAR_BIT}. @item TARGET_READ_PC @findex TARGET_READ_PC @itemx TARGET_WRITE_PC (@var{val}, @var{pid}) @findex TARGET_WRITE_PC @anchor{TARGET_WRITE_PC} @itemx TARGET_READ_SP @findex TARGET_READ_SP @itemx TARGET_READ_FP @findex TARGET_READ_FP @findex read_pc @findex write_pc @findex read_sp @findex read_fp @anchor{TARGET_READ_SP} These change the behavior of @code{read_pc}, @code{write_pc}, and @code{read_sp}. For most targets, these may be left undefined. @value{GDBN} will call the read and write register functions with the relevant @code{_REGNUM} argument. These macros are useful when a target keeps one of these registers in a hard to get at place; for example, part in a segment register and part in an ordinary register. @xref{unwind_sp}, which replaces @code{TARGET_READ_SP}. @item TARGET_VIRTUAL_FRAME_POINTER(@var{pc}, @var{regp}, @var{offsetp}) @findex TARGET_VIRTUAL_FRAME_POINTER Returns a @code{(register, offset)} pair representing the virtual frame pointer in use at the code address @var{pc}. If virtual frame pointers are not used, a default definition simply returns @code{DEPRECATED_FP_REGNUM}, with an offset of zero. @item TARGET_HAS_HARDWARE_WATCHPOINTS If non-zero, the target has support for hardware-assisted watchpoints. @xref{Algorithms, watchpoints}, for more details and other related macros. @item TARGET_PRINT_INSN (@var{addr}, @var{info}) @findex TARGET_PRINT_INSN This is the function used by @value{GDBN} to print an assembly instruction. It prints the instruction at address @var{addr} in debugged memory and returns the length of the instruction, in bytes. If a target doesn't define its own printing routine, it defaults to an accessor function for the global pointer @code{deprecated_tm_print_insn}. This usually points to a function in the @code{opcodes} library (@pxref{Support Libraries, ,Opcodes}). @var{info} is a structure (of type @code{disassemble_info}) defined in @file{include/dis-asm.h} used to pass information to the instruction decoding routine. @item struct frame_id unwind_dummy_id (struct frame_info *@var{frame}) @findex unwind_dummy_id @anchor{unwind_dummy_id} Given @var{frame} return a @code{struct frame_id} that uniquely identifies an inferior function call's dummy frame. The value returned must match the dummy frame stack value previously saved using @code{SAVE_DUMMY_FRAME_TOS}. @xref{SAVE_DUMMY_FRAME_TOS}. @item DEPRECATED_USE_STRUCT_CONVENTION (@var{gcc_p}, @var{type}) @findex DEPRECATED_USE_STRUCT_CONVENTION If defined, this must be an expression that is nonzero if a value of the given @var{type} being returned from a function must have space allocated for it on the stack. @var{gcc_p} is true if the function being considered is known to have been compiled by GCC; this is helpful for systems where GCC is known to use different calling convention than other compilers. This method has been deprecated in favour of @code{gdbarch_return_value} (@pxref{gdbarch_return_value}). @item VALUE_TO_REGISTER(@var{type}, @var{regnum}, @var{from}, @var{to}) @findex VALUE_TO_REGISTER Convert a value of type @var{type} into the raw contents of register @var{regnum}'s. @xref{Target Architecture Definition, , Using Different Register and Memory Data Representations}. @item VARIABLES_INSIDE_BLOCK (@var{desc}, @var{gcc_p}) @findex VARIABLES_INSIDE_BLOCK For dbx-style debugging information, if the compiler puts variable declarations inside LBRAC/RBRAC blocks, this should be defined to be nonzero. @var{desc} is the value of @code{n_desc} from the @code{N_RBRAC} symbol, and @var{gcc_p} is true if @value{GDBN} has noticed the presence of either the @code{GCC_COMPILED_SYMBOL} or the @code{GCC2_COMPILED_SYMBOL}. By default, this is 0. @item OS9K_VARIABLES_INSIDE_BLOCK (@var{desc}, @var{gcc_p}) @findex OS9K_VARIABLES_INSIDE_BLOCK Similarly, for OS/9000. Defaults to 1. @end table Motorola M68K target conditionals. @ftable @code @item BPT_VECTOR Define this to be the 4-bit location of the breakpoint trap vector. If not defined, it will default to @code{0xf}. @item REMOTE_BPT_VECTOR Defaults to @code{1}. @item NAME_OF_MALLOC @findex NAME_OF_MALLOC A string containing the name of the function to call in order to allocate some memory in the inferior. The default value is "malloc". @end ftable @section Adding a New Target @cindex adding a target The following files add a target to @value{GDBN}: @table @file @vindex TDEPFILES @item gdb/config/@var{arch}/@var{ttt}.mt Contains a Makefile fragment specific to this target. Specifies what object files are needed for target @var{ttt}, by defining @samp{TDEPFILES=@dots{}} and @samp{TDEPLIBS=@dots{}}. Also specifies the header file which describes @var{ttt}, by defining @samp{TM_FILE= tm-@var{ttt}.h}. You can also define @samp{TM_CFLAGS}, @samp{TM_CLIBS}, @samp{TM_CDEPS}, but these are now deprecated, replaced by autoconf, and may go away in future versions of @value{GDBN}. @item gdb/@var{ttt}-tdep.c Contains any miscellaneous code required for this target machine. On some machines it doesn't exist at all. Sometimes the macros in @file{tm-@var{ttt}.h} become very complicated, so they are implemented as functions here instead, and the macro is simply defined to call the function. This is vastly preferable, since it is easier to understand and debug. @item gdb/@var{arch}-tdep.c @itemx gdb/@var{arch}-tdep.h This often exists to describe the basic layout of the target machine's processor chip (registers, stack, etc.). If used, it is included by @file{@var{ttt}-tdep.h}. It can be shared among many targets that use the same processor. @item gdb/config/@var{arch}/tm-@var{ttt}.h (@file{tm.h} is a link to this file, created by @code{configure}). Contains macro definitions about the target machine's registers, stack frame format and instructions. New targets do not need this file and should not create it. @item gdb/config/@var{arch}/tm-@var{arch}.h This often exists to describe the basic layout of the target machine's processor chip (registers, stack, etc.). If used, it is included by @file{tm-@var{ttt}.h}. It can be shared among many targets that use the same processor. New targets do not need this file and should not create it. @end table If you are adding a new operating system for an existing CPU chip, add a @file{config/tm-@var{os}.h} file that describes the operating system facilities that are unusual (extra symbol table info; the breakpoint instruction needed; etc.). Then write a @file{@var{arch}/tm-@var{os}.h} that just @code{#include}s @file{tm-@var{arch}.h} and @file{config/tm-@var{os}.h}. @section Converting an existing Target Architecture to Multi-arch @cindex converting targets to multi-arch This section describes the current accepted best practice for converting an existing target architecture to the multi-arch framework. The process consists of generating, testing, posting and committing a sequence of patches. Each patch must contain a single change, for instance: @itemize @bullet @item Directly convert a group of functions into macros (the conversion does not change the behavior of any of the functions). @item Replace a non-multi-arch with a multi-arch mechanism (e.g., @code{FRAME_INFO}). @item Enable multi-arch level one. @item Delete one or more files. @end itemize @noindent There isn't a size limit on a patch, however, a developer is strongly encouraged to keep the patch size down. Since each patch is well defined, and since each change has been tested and shows no regressions, the patches are considered @emph{fairly} obvious. Such patches, when submitted by developers listed in the @file{MAINTAINERS} file, do not need approval. Occasional steps in the process may be more complicated and less clear. The developer is expected to use their judgment and is encouraged to seek advice as needed. @subsection Preparation The first step is to establish control. Build (with @option{-Werror} enabled) and test the target so that there is a baseline against which the debugger can be compared. At no stage can the test results regress or @value{GDBN} stop compiling with @option{-Werror}. @subsection Add the multi-arch initialization code The objective of this step is to establish the basic multi-arch framework. It involves @itemize @bullet @item The addition of a @code{@var{arch}_gdbarch_init} function@footnote{The above is from the original example and uses K&R C. @value{GDBN} has since converted to ISO C but lets ignore that.} that creates the architecture: @smallexample static struct gdbarch * d10v_gdbarch_init (info, arches) struct gdbarch_info info; struct gdbarch_list *arches; @{ struct gdbarch *gdbarch; /* there is only one d10v architecture */ if (arches != NULL) return arches->gdbarch; gdbarch = gdbarch_alloc (&info, NULL); return gdbarch; @} @end smallexample @noindent @emph{} @item A per-architecture dump function to print any architecture specific information: @smallexample static void mips_dump_tdep (struct gdbarch *current_gdbarch, struct ui_file *file) @{ @dots{} code to print architecture specific info @dots{} @} @end smallexample @item A change to @code{_initialize_@var{arch}_tdep} to register this new architecture: @smallexample void _initialize_mips_tdep (void) @{ gdbarch_register (bfd_arch_mips, mips_gdbarch_init, mips_dump_tdep); @end smallexample @item Add the macro @code{GDB_MULTI_ARCH}, defined as 0 (zero), to the file@* @file{config/@var{arch}/tm-@var{arch}.h}. @end itemize @subsection Update multi-arch incompatible mechanisms Some mechanisms do not work with multi-arch. They include: @table @code @item FRAME_FIND_SAVED_REGS Replaced with @code{DEPRECATED_FRAME_INIT_SAVED_REGS} @end table @noindent At this stage you could also consider converting the macros into functions. @subsection Prepare for multi-arch level to one Temporally set @code{GDB_MULTI_ARCH} to @code{GDB_MULTI_ARCH_PARTIAL} and then build and start @value{GDBN} (the change should not be committed). @value{GDBN} may not build, and once built, it may die with an internal error listing the architecture methods that must be provided. Fix any build problems (patch(es)). Convert all the architecture methods listed, which are only macros, into functions (patch(es)). Update @code{@var{arch}_gdbarch_init} to set all the missing architecture methods and wrap the corresponding macros in @code{#if !GDB_MULTI_ARCH} (patch(es)). @subsection Set multi-arch level one Change the value of @code{GDB_MULTI_ARCH} to GDB_MULTI_ARCH_PARTIAL (a single patch). Any problems with throwing ``the switch'' should have been fixed already. @subsection Convert remaining macros Suggest converting macros into functions (and setting the corresponding architecture method) in small batches. @subsection Set multi-arch level to two This should go smoothly. @subsection Delete the TM file The @file{tm-@var{arch}.h} can be deleted. @file{@var{arch}.mt} and @file{configure.in} updated. @node Target Vector Definition @chapter Target Vector Definition @cindex target vector The target vector defines the interface between @value{GDBN}'s abstract handling of target systems, and the nitty-gritty code that actually exercises control over a process or a serial port. @value{GDBN} includes some 30-40 different target vectors; however, each configuration of @value{GDBN} includes only a few of them. @section File Targets Both executables and core files have target vectors. @section Standard Protocol and Remote Stubs @value{GDBN}'s file @file{remote.c} talks a serial protocol to code that runs in the target system. @value{GDBN} provides several sample @dfn{stubs} that can be integrated into target programs or operating systems for this purpose; they are named @file{*-stub.c}. The @value{GDBN} user's manual describes how to put such a stub into your target code. What follows is a discussion of integrating the SPARC stub into a complicated operating system (rather than a simple program), by Stu Grossman, the author of this stub. The trap handling code in the stub assumes the following upon entry to @code{trap_low}: @enumerate @item %l1 and %l2 contain pc and npc respectively at the time of the trap; @item traps are disabled; @item you are in the correct trap window. @end enumerate As long as your trap handler can guarantee those conditions, then there is no reason why you shouldn't be able to ``share'' traps with the stub. The stub has no requirement that it be jumped to directly from the hardware trap vector. That is why it calls @code{exceptionHandler()}, which is provided by the external environment. For instance, this could set up the hardware traps to actually execute code which calls the stub first, and then transfers to its own trap handler. For the most point, there probably won't be much of an issue with ``sharing'' traps, as the traps we use are usually not used by the kernel, and often indicate unrecoverable error conditions. Anyway, this is all controlled by a table, and is trivial to modify. The most important trap for us is for @code{ta 1}. Without that, we can't single step or do breakpoints. Everything else is unnecessary for the proper operation of the debugger/stub. From reading the stub, it's probably not obvious how breakpoints work. They are simply done by deposit/examine operations from @value{GDBN}. @section ROM Monitor Interface @section Custom Protocols @section Transport Layer @section Builtin Simulator @node Native Debugging @chapter Native Debugging @cindex native debugging Several files control @value{GDBN}'s configuration for native support: @table @file @vindex NATDEPFILES @item gdb/config/@var{arch}/@var{xyz}.mh Specifies Makefile fragments needed by a @emph{native} configuration on machine @var{xyz}. In particular, this lists the required native-dependent object files, by defining @samp{NATDEPFILES=@dots{}}. Also specifies the header file which describes native support on @var{xyz}, by defining @samp{NAT_FILE= nm-@var{xyz}.h}. You can also define @samp{NAT_CFLAGS}, @samp{NAT_ADD_FILES}, @samp{NAT_CLIBS}, @samp{NAT_CDEPS}, etc.; see @file{Makefile.in}. @emph{Maintainer's note: The @file{.mh} suffix is because this file originally contained @file{Makefile} fragments for hosting @value{GDBN} on machine @var{xyz}. While the file is no longer used for this purpose, the @file{.mh} suffix remains. Perhaps someone will eventually rename these fragments so that they have a @file{.mn} suffix.} @item gdb/config/@var{arch}/nm-@var{xyz}.h (@file{nm.h} is a link to this file, created by @code{configure}). Contains C macro definitions describing the native system environment, such as child process control and core file support. @item gdb/@var{xyz}-nat.c Contains any miscellaneous C code required for this native support of this machine. On some machines it doesn't exist at all. @end table There are some ``generic'' versions of routines that can be used by various systems. These can be customized in various ways by macros defined in your @file{nm-@var{xyz}.h} file. If these routines work for the @var{xyz} host, you can just include the generic file's name (with @samp{.o}, not @samp{.c}) in @code{NATDEPFILES}. Otherwise, if your machine needs custom support routines, you will need to write routines that perform the same functions as the generic file. Put them into @file{@var{xyz}-nat.c}, and put @file{@var{xyz}-nat.o} into @code{NATDEPFILES}. @table @file @item inftarg.c This contains the @emph{target_ops vector} that supports Unix child processes on systems which use ptrace and wait to control the child. @item procfs.c This contains the @emph{target_ops vector} that supports Unix child processes on systems which use /proc to control the child. @item fork-child.c This does the low-level grunge that uses Unix system calls to do a ``fork and exec'' to start up a child process. @item infptrace.c This is the low level interface to inferior processes for systems using the Unix @code{ptrace} call in a vanilla way. @end table @section Native core file Support @cindex native core files @table @file @findex fetch_core_registers @item core-aout.c::fetch_core_registers() Support for reading registers out of a core file. This routine calls @code{register_addr()}, see below. Now that BFD is used to read core files, virtually all machines should use @code{core-aout.c}, and should just provide @code{fetch_core_registers} in @code{@var{xyz}-nat.c} (or @code{REGISTER_U_ADDR} in @code{nm-@var{xyz}.h}). @item core-aout.c::register_addr() If your @code{nm-@var{xyz}.h} file defines the macro @code{REGISTER_U_ADDR(addr, blockend, regno)}, it should be defined to set @code{addr} to the offset within the @samp{user} struct of @value{GDBN} register number @code{regno}. @code{blockend} is the offset within the ``upage'' of @code{u.u_ar0}. If @code{REGISTER_U_ADDR} is defined, @file{core-aout.c} will define the @code{register_addr()} function and use the macro in it. If you do not define @code{REGISTER_U_ADDR}, but you are using the standard @code{fetch_core_registers()}, you will need to define your own version of @code{register_addr()}, put it into your @code{@var{xyz}-nat.c} file, and be sure @code{@var{xyz}-nat.o} is in the @code{NATDEPFILES} list. If you have your own @code{fetch_core_registers()}, you may not need a separate @code{register_addr()}. Many custom @code{fetch_core_registers()} implementations simply locate the registers themselves.@refill @end table When making @value{GDBN} run native on a new operating system, to make it possible to debug core files, you will need to either write specific code for parsing your OS's core files, or customize @file{bfd/trad-core.c}. First, use whatever @code{#include} files your machine uses to define the struct of registers that is accessible (possibly in the u-area) in a core file (rather than @file{machine/reg.h}), and an include file that defines whatever header exists on a core file (e.g. the u-area or a @code{struct core}). Then modify @code{trad_unix_core_file_p} to use these values to set up the section information for the data segment, stack segment, any other segments in the core file (perhaps shared library contents or control information), ``registers'' segment, and if there are two discontiguous sets of registers (e.g. integer and float), the ``reg2'' segment. This section information basically delimits areas in the core file in a standard way, which the section-reading routines in BFD know how to seek around in. Then back in @value{GDBN}, you need a matching routine called @code{fetch_core_registers}. If you can use the generic one, it's in @file{core-aout.c}; if not, it's in your @file{@var{xyz}-nat.c} file. It will be passed a char pointer to the entire ``registers'' segment, its length, and a zero; or a char pointer to the entire ``regs2'' segment, its length, and a 2. The routine should suck out the supplied register values and install them into @value{GDBN}'s ``registers'' array. If your system uses @file{/proc} to control processes, and uses ELF format core files, then you may be able to use the same routines for reading the registers out of processes and out of core files. @section ptrace @section /proc @section win32 @section shared libraries @section Native Conditionals @cindex native conditionals When @value{GDBN} is configured and compiled, various macros are defined or left undefined, to control compilation when the host and target systems are the same. These macros should be defined (or left undefined) in @file{nm-@var{system}.h}. @table @code @item CHILD_PREPARE_TO_STORE @findex CHILD_PREPARE_TO_STORE If the machine stores all registers at once in the child process, then define this to ensure that all values are correct. This usually entails a read from the child. [Note that this is incorrectly defined in @file{xm-@var{system}.h} files currently.] @item FETCH_INFERIOR_REGISTERS @findex FETCH_INFERIOR_REGISTERS Define this if the native-dependent code will provide its own routines @code{fetch_inferior_registers} and @code{store_inferior_registers} in @file{@var{host}-nat.c}. If this symbol is @emph{not} defined, and @file{infptrace.c} is included in this configuration, the default routines in @file{infptrace.c} are used for these functions. @item FP0_REGNUM @findex FP0_REGNUM This macro is normally defined to be the number of the first floating point register, if the machine has such registers. As such, it would appear only in target-specific code. However, @file{/proc} support uses this to decide whether floats are in use on this target. @item GET_LONGJMP_TARGET @findex GET_LONGJMP_TARGET For most machines, this is a target-dependent parameter. On the DECstation and the Iris, this is a native-dependent parameter, since @file{setjmp.h} is needed to define it. This macro determines the target PC address that @code{longjmp} will jump to, assuming that we have just stopped at a longjmp breakpoint. It takes a @code{CORE_ADDR *} as argument, and stores the target PC value through this pointer. It examines the current state of the machine as needed. @item I386_USE_GENERIC_WATCHPOINTS An x86-based machine can define this to use the generic x86 watchpoint support; see @ref{Algorithms, I386_USE_GENERIC_WATCHPOINTS}. @item KERNEL_U_ADDR @findex KERNEL_U_ADDR Define this to the address of the @code{u} structure (the ``user struct'', also known as the ``u-page'') in kernel virtual memory. @value{GDBN} needs to know this so that it can subtract this address from absolute addresses in the upage, that are obtained via ptrace or from core files. On systems that don't need this value, set it to zero. @item KERNEL_U_ADDR_HPUX @findex KERNEL_U_ADDR_HPUX Define this to cause @value{GDBN} to determine the address of @code{u} at runtime, by using HP-style @code{nlist} on the kernel's image in the root directory. @item ONE_PROCESS_WRITETEXT @findex ONE_PROCESS_WRITETEXT Define this to be able to, when a breakpoint insertion fails, warn the user that another process may be running with the same executable. @item PROC_NAME_FMT @findex PROC_NAME_FMT Defines the format for the name of a @file{/proc} device. Should be defined in @file{nm.h} @emph{only} in order to override the default definition in @file{procfs.c}. @item PTRACE_ARG3_TYPE @findex PTRACE_ARG3_TYPE The type of the third argument to the @code{ptrace} system call, if it exists and is different from @code{int}. @item REGISTER_U_ADDR @findex REGISTER_U_ADDR Defines the offset of the registers in the ``u area''. @item SHELL_COMMAND_CONCAT @findex SHELL_COMMAND_CONCAT If defined, is a string to prefix on the shell command used to start the inferior. @item SHELL_FILE @findex SHELL_FILE If defined, this is the name of the shell to use to run the inferior. Defaults to @code{"/bin/sh"}. @item SOLIB_ADD (@var{filename}, @var{from_tty}, @var{targ}, @var{readsyms}) @findex SOLIB_ADD Define this to expand into an expression that will cause the symbols in @var{filename} to be added to @value{GDBN}'s symbol table. If @var{readsyms} is zero symbols are not read but any necessary low level processing for @var{filename} is still done. @item SOLIB_CREATE_INFERIOR_HOOK @findex SOLIB_CREATE_INFERIOR_HOOK Define this to expand into any shared-library-relocation code that you want to be run just after the child process has been forked. @item START_INFERIOR_TRAPS_EXPECTED @findex START_INFERIOR_TRAPS_EXPECTED When starting an inferior, @value{GDBN} normally expects to trap twice; once when the shell execs, and once when the program itself execs. If the actual number of traps is something other than 2, then define this macro to expand into the number expected. @item USE_PROC_FS @findex USE_PROC_FS This determines whether small routines in @file{*-tdep.c}, which translate register values between @value{GDBN}'s internal representation and the @file{/proc} representation, are compiled. @item U_REGS_OFFSET @findex U_REGS_OFFSET This is the offset of the registers in the upage. It need only be defined if the generic ptrace register access routines in @file{infptrace.c} are being used (that is, @file{infptrace.c} is configured in, and @code{FETCH_INFERIOR_REGISTERS} is not defined). If the default value from @file{infptrace.c} is good enough, leave it undefined. The default value means that u.u_ar0 @emph{points to} the location of the registers. I'm guessing that @code{#define U_REGS_OFFSET 0} means that @code{u.u_ar0} @emph{is} the location of the registers. @item CLEAR_SOLIB @findex CLEAR_SOLIB See @file{objfiles.c}. @item DEBUG_PTRACE @findex DEBUG_PTRACE Define this to debug @code{ptrace} calls. @end table @node Support Libraries @chapter Support Libraries @section BFD @cindex BFD library BFD provides support for @value{GDBN} in several ways: @table @emph @item identifying executable and core files BFD will identify a variety of file types, including a.out, coff, and several variants thereof, as well as several kinds of core files. @item access to sections of files BFD parses the file headers to determine the names, virtual addresses, sizes, and file locations of all the various named sections in files (such as the text section or the data section). @value{GDBN} simply calls BFD to read or write section @var{x} at byte offset @var{y} for length @var{z}. @item specialized core file support BFD provides routines to determine the failing command name stored in a core file, the signal with which the program failed, and whether a core file matches (i.e.@: could be a core dump of) a particular executable file. @item locating the symbol information @value{GDBN} uses an internal interface of BFD to determine where to find the symbol information in an executable file or symbol-file. @value{GDBN} itself handles the reading of symbols, since BFD does not ``understand'' debug symbols, but @value{GDBN} uses BFD's cached information to find the symbols, string table, etc. @end table @section opcodes @cindex opcodes library The opcodes library provides @value{GDBN}'s disassembler. (It's a separate library because it's also used in binutils, for @file{objdump}). @section readline @section mmalloc @section libiberty @cindex @code{libiberty} library The @code{libiberty} library provides a set of functions and features that integrate and improve on functionality found in modern operating systems. Broadly speaking, such features can be divided into three groups: supplemental functions (functions that may be missing in some environments and operating systems), replacement functions (providing a uniform and easier to use interface for commonly used standard functions), and extensions (which provide additional functionality beyond standard functions). @value{GDBN} uses various features provided by the @code{libiberty} library, for instance the C@t{++} demangler, the @acronym{IEEE} floating format support functions, the input options parser @samp{getopt}, the @samp{obstack} extension, and other functions. @subsection @code{obstacks} in @value{GDBN} @cindex @code{obstacks} The obstack mechanism provides a convenient way to allocate and free chunks of memory. Each obstack is a pool of memory that is managed like a stack. Objects (of any nature, size and alignment) are allocated and freed in a @acronym{LIFO} fashion on an obstack (see @code{libiberty}'s documenatation for a more detailed explanation of @code{obstacks}). The most noticeable use of the @code{obstacks} in @value{GDBN} is in object files. There is an obstack associated with each internal representation of an object file. Lots of things get allocated on these @code{obstacks}: dictionary entries, blocks, blockvectors, symbols, minimal symbols, types, vectors of fundamental types, class fields of types, object files section lists, object files section offets lists, line tables, symbol tables, partial symbol tables, string tables, symbol table private data, macros tables, debug information sections and entries, import and export lists (som), unwind information (hppa), dwarf2 location expressions data. Plus various strings such as directory names strings, debug format strings, names of types. An essential and convenient property of all data on @code{obstacks} is that memory for it gets allocated (with @code{obstack_alloc}) at various times during a debugging sesssion, but it is released all at once using the @code{obstack_free} function. The @code{obstack_free} function takes a pointer to where in the stack it must start the deletion from (much like the cleanup chains have a pointer to where to start the cleanups). Because of the stack like structure of the @code{obstacks}, this allows to free only a top portion of the obstack. There are a few instances in @value{GDBN} where such thing happens. Calls to @code{obstack_free} are done after some local data is allocated to the obstack. Only the local data is deleted from the obstack. Of course this assumes that nothing between the @code{obstack_alloc} and the @code{obstack_free} allocates anything else on the same obstack. For this reason it is best and safest to use temporary @code{obstacks}. Releasing the whole obstack is also not safe per se. It is safe only under the condition that we know the @code{obstacks} memory is no longer needed. In @value{GDBN} we get rid of the @code{obstacks} only when we get rid of the whole objfile(s), for instance upon reading a new symbol file. @section gnu-regex @cindex regular expressions library Regex conditionals. @table @code @item C_ALLOCA @item NFAILURES @item RE_NREGS @item SIGN_EXTEND_CHAR @item SWITCH_ENUM_BUG @item SYNTAX_TABLE @item Sword @item sparc @end table @section include @node Coding @chapter Coding This chapter covers topics that are lower-level than the major algorithms of @value{GDBN}. @section Cleanups @cindex cleanups Cleanups are a structured way to deal with things that need to be done later. When your code does something (e.g., @code{xmalloc} some memory, or @code{open} a file) that needs to be undone later (e.g., @code{xfree} the memory or @code{close} the file), it can make a cleanup. The cleanup will be done at some future point: when the command is finished and control returns to the top level; when an error occurs and the stack is unwound; or when your code decides it's time to explicitly perform cleanups. Alternatively you can elect to discard the cleanups you created. Syntax: @table @code @item struct cleanup *@var{old_chain}; Declare a variable which will hold a cleanup chain handle. @findex make_cleanup @item @var{old_chain} = make_cleanup (@var{function}, @var{arg}); Make a cleanup which will cause @var{function} to be called with @var{arg} (a @code{char *}) later. The result, @var{old_chain}, is a handle that can later be passed to @code{do_cleanups} or @code{discard_cleanups}. Unless you are going to call @code{do_cleanups} or @code{discard_cleanups}, you can ignore the result from @code{make_cleanup}. @findex do_cleanups @item do_cleanups (@var{old_chain}); Do all cleanups added to the chain since the corresponding @code{make_cleanup} call was made. @findex discard_cleanups @item discard_cleanups (@var{old_chain}); Same as @code{do_cleanups} except that it just removes the cleanups from the chain and does not call the specified functions. @end table Cleanups are implemented as a chain. The handle returned by @code{make_cleanups} includes the cleanup passed to the call and any later cleanups appended to the chain (but not yet discarded or performed). E.g.: @smallexample make_cleanup (a, 0); @{ struct cleanup *old = make_cleanup (b, 0); make_cleanup (c, 0) ... do_cleanups (old); @} @end smallexample @noindent will call @code{c()} and @code{b()} but will not call @code{a()}. The cleanup that calls @code{a()} will remain in the cleanup chain, and will be done later unless otherwise discarded.@refill Your function should explicitly do or discard the cleanups it creates. Failing to do this leads to non-deterministic behavior since the caller will arbitrarily do or discard your functions cleanups. This need leads to two common cleanup styles. The first style is try/finally. Before it exits, your code-block calls @code{do_cleanups} with the old cleanup chain and thus ensures that your code-block's cleanups are always performed. For instance, the following code-segment avoids a memory leak problem (even when @code{error} is called and a forced stack unwind occurs) by ensuring that the @code{xfree} will always be called: @smallexample struct cleanup *old = make_cleanup (null_cleanup, 0); data = xmalloc (sizeof blah); make_cleanup (xfree, data); ... blah blah ... do_cleanups (old); @end smallexample The second style is try/except. Before it exits, your code-block calls @code{discard_cleanups} with the old cleanup chain and thus ensures that any created cleanups are not performed. For instance, the following code segment, ensures that the file will be closed but only if there is an error: @smallexample FILE *file = fopen ("afile", "r"); struct cleanup *old = make_cleanup (close_file, file); ... blah blah ... discard_cleanups (old); return file; @end smallexample Some functions, e.g. @code{fputs_filtered()} or @code{error()}, specify that they ``should not be called when cleanups are not in place''. This means that any actions you need to reverse in the case of an error or interruption must be on the cleanup chain before you call these functions, since they might never return to your code (they @samp{longjmp} instead). @section Per-architecture module data @cindex per-architecture module data @cindex multi-arch data @cindex data-pointer, per-architecture/per-module The multi-arch framework includes a mechanism for adding module specific per-architecture data-pointers to the @code{struct gdbarch} architecture object. A module registers one or more per-architecture data-pointers using: @deftypefun struct gdbarch_data *gdbarch_data_register_pre_init (gdbarch_data_pre_init_ftype *@var{pre_init}) @var{pre_init} is used to, on-demand, allocate an initial value for a per-architecture data-pointer using the architecture's obstack (passed in as a parameter). Since @var{pre_init} can be called during architecture creation, it is not parameterized with the architecture. and must not call modules that use per-architecture data. @end deftypefun @deftypefun struct gdbarch_data *gdbarch_data_register_post_init (gdbarch_data_post_init_ftype *@var{post_init}) @var{post_init} is used to obtain an initial value for a per-architecture data-pointer @emph{after}. Since @var{post_init} is always called after architecture creation, it both receives the fully initialized architecture and is free to call modules that use per-architecture data (care needs to be taken to ensure that those other modules do not try to call back to this module as that will create in cycles in the initialization call graph). @end deftypefun These functions return a @code{struct gdbarch_data} that is used to identify the per-architecture data-pointer added for that module. The per-architecture data-pointer is accessed using the function: @deftypefun void *gdbarch_data (struct gdbarch *@var{gdbarch}, struct gdbarch_data *@var{data_handle}) Given the architecture @var{arch} and module data handle @var{data_handle} (returned by @code{gdbarch_data_register_pre_init} or @code{gdbarch_data_register_post_init}), this function returns the current value of the per-architecture data-pointer. If the data pointer is @code{NULL}, it is first initialized by calling the corresponding @var{pre_init} or @var{post_init} method. @end deftypefun The examples below assume the following definitions: @smallexample struct nozel @{ int total; @}; static struct gdbarch_data *nozel_handle; @end smallexample A module can extend the architecture vector, adding additional per-architecture data, using the @var{pre_init} method. The module's per-architecture data is then initialized during architecture creation. In the below, the module's per-architecture @emph{nozel} is added. An architecture can specify its nozel by calling @code{set_gdbarch_nozel} from @code{gdbarch_init}. @smallexample static void * nozel_pre_init (struct obstack *obstack) @{ struct nozel *data = OBSTACK_ZALLOC (obstack, struct nozel); return data; @} @end smallexample @smallexample extern void set_gdbarch_nozel (struct gdbarch *gdbarch, int total) @{ struct nozel *data = gdbarch_data (gdbarch, nozel_handle); data->total = nozel; @} @end smallexample A module can on-demand create architecture dependant data structures using @code{post_init}. In the below, the nozel's total is computed on-demand by @code{nozel_post_init} using information obtained from the architecture. @smallexample static void * nozel_post_init (struct gdbarch *gdbarch) @{ struct nozel *data = GDBARCH_OBSTACK_ZALLOC (gdbarch, struct nozel); nozel->total = gdbarch@dots{} (gdbarch); return data; @} @end smallexample @smallexample extern int nozel_total (struct gdbarch *gdbarch) @{ struct nozel *data = gdbarch_data (gdbarch, nozel_handle); return data->total; @} @end smallexample @section Wrapping Output Lines @cindex line wrap in output @findex wrap_here Output that goes through @code{printf_filtered} or @code{fputs_filtered} or @code{fputs_demangled} needs only to have calls to @code{wrap_here} added in places that would be good breaking points. The utility routines will take care of actually wrapping if the line width is exceeded. The argument to @code{wrap_here} is an indentation string which is printed @emph{only} if the line breaks there. This argument is saved away and used later. It must remain valid until the next call to @code{wrap_here} or until a newline has been printed through the @code{*_filtered} functions. Don't pass in a local variable and then return! It is usually best to call @code{wrap_here} after printing a comma or space. If you call it before printing a space, make sure that your indentation properly accounts for the leading space that will print if the line wraps there. Any function or set of functions that produce filtered output must finish by printing a newline, to flush the wrap buffer, before switching to unfiltered (@code{printf}) output. Symbol reading routines that print warnings are a good example. @section @value{GDBN} Coding Standards @cindex coding standards @value{GDBN} follows the GNU coding standards, as described in @file{etc/standards.texi}. This file is also available for anonymous FTP from GNU archive sites. @value{GDBN} takes a strict interpretation of the standard; in general, when the GNU standard recommends a practice but does not require it, @value{GDBN} requires it. @value{GDBN} follows an additional set of coding standards specific to @value{GDBN}, as described in the following sections. @subsection ISO C @value{GDBN} assumes an ISO/IEC 9899:1990 (a.k.a.@: ISO C90) compliant compiler. @value{GDBN} does not assume an ISO C or POSIX compliant C library. @subsection Memory Management @value{GDBN} does not use the functions @code{malloc}, @code{realloc}, @code{calloc}, @code{free} and @code{asprintf}. @value{GDBN} uses the functions @code{xmalloc}, @code{xrealloc} and @code{xcalloc} when allocating memory. Unlike @code{malloc} et.al.@: these functions do not return when the memory pool is empty. Instead, they unwind the stack using cleanups. These functions return @code{NULL} when requested to allocate a chunk of memory of size zero. @emph{Pragmatics: By using these functions, the need to check every memory allocation is removed. These functions provide portable behavior.} @value{GDBN} does not use the function @code{free}. @value{GDBN} uses the function @code{xfree} to return memory to the memory pool. Consistent with ISO-C, this function ignores a request to free a @code{NULL} pointer. @emph{Pragmatics: On some systems @code{free} fails when passed a @code{NULL} pointer.} @value{GDBN} can use the non-portable function @code{alloca} for the allocation of small temporary values (such as strings). @emph{Pragmatics: This function is very non-portable. Some systems restrict the memory being allocated to no more than a few kilobytes.} @value{GDBN} uses the string function @code{xstrdup} and the print function @code{xstrprintf}. @emph{Pragmatics: @code{asprintf} and @code{strdup} can fail. Print functions such as @code{sprintf} are very prone to buffer overflow errors.} @subsection Compiler Warnings @cindex compiler warnings With few exceptions, developers should include the configuration option @samp{--enable-gdb-build-warnings=,-Werror} when building @value{GDBN}. The exceptions are listed in the file @file{gdb/MAINTAINERS}. This option causes @value{GDBN} (when built using GCC) to be compiled with a carefully selected list of compiler warning flags. Any warnings from those flags being treated as errors. The current list of warning flags includes: @table @samp @item -Wimplicit Since @value{GDBN} coding standard requires all functions to be declared using a prototype, the flag has the side effect of ensuring that prototyped functions are always visible with out resorting to @samp{-Wstrict-prototypes}. @item -Wreturn-type Such code often appears to work except on instruction set architectures that use register windows. @item -Wcomment @item -Wtrigraphs @item -Wformat @itemx -Wformat-nonliteral Since @value{GDBN} uses the @code{format printf} attribute on all @code{printf} like functions these check not just @code{printf} calls but also calls to functions such as @code{fprintf_unfiltered}. @item -Wparentheses This warning includes uses of the assignment operator within an @code{if} statement. @item -Wpointer-arith @item -Wuninitialized @item -Wunused-label This warning has the additional benefit of detecting the absence of the @code{case} reserved word in a switch statement: @smallexample enum @{ FD_SCHEDULED, NOTHING_SCHEDULED @} sched; @dots{} switch (sched) @{ case FD_SCHEDULED: @dots{}; break; NOTHING_SCHEDULED: @dots{}; break; @} @end smallexample @item -Wunused-function @end table @emph{Pragmatics: Due to the way that @value{GDBN} is implemented most functions have unused parameters. Consequently the warning @samp{-Wunused-parameter} is precluded from the list. The macro @code{ATTRIBUTE_UNUSED} is not used as it leads to false negatives --- it is not an error to have @code{ATTRIBUTE_UNUSED} on a parameter that is being used. The options @samp{-Wall} and @samp{-Wunused} are also precluded because they both include @samp{-Wunused-parameter}.} @emph{Pragmatics: @value{GDBN} has not simply accepted the warnings enabled by @samp{-Wall -Werror -W...}. Instead it is selecting warnings when and where their benefits can be demonstrated.} @subsection Formatting @cindex source code formatting The standard GNU recommendations for formatting must be followed strictly. A function declaration should not have its name in column zero. A function definition should have its name in column zero. @smallexample /* Declaration */ static void foo (void); /* Definition */ void foo (void) @{ @} @end smallexample @emph{Pragmatics: This simplifies scripting. Function definitions can be found using @samp{^function-name}.} There must be a space between a function or macro name and the opening parenthesis of its argument list (except for macro definitions, as required by C). There must not be a space after an open paren/bracket or before a close paren/bracket. While additional whitespace is generally helpful for reading, do not use more than one blank line to separate blocks, and avoid adding whitespace after the end of a program line (as of 1/99, some 600 lines had whitespace after the semicolon). Excess whitespace causes difficulties for @code{diff} and @code{patch} utilities. Pointers are declared using the traditional K&R C style: @smallexample void *foo; @end smallexample @noindent and not: @smallexample void * foo; void* foo; @end smallexample @subsection Comments @cindex comment formatting The standard GNU requirements on comments must be followed strictly. Block comments must appear in the following form, with no @code{/*}- or @code{*/}-only lines, and no leading @code{*}: @smallexample /* Wait for control to return from inferior to debugger. If inferior gets a signal, we may decide to start it up again instead of returning. That is why there is a loop in this function. When this function actually returns it means the inferior should be left stopped and @value{GDBN} should read more commands. */ @end smallexample (Note that this format is encouraged by Emacs; tabbing for a multi-line comment works correctly, and @kbd{M-q} fills the block consistently.) Put a blank line between the block comments preceding function or variable definitions, and the definition itself. In general, put function-body comments on lines by themselves, rather than trying to fit them into the 20 characters left at the end of a line, since either the comment or the code will inevitably get longer than will fit, and then somebody will have to move it anyhow. @subsection C Usage @cindex C data types Code must not depend on the sizes of C data types, the format of the host's floating point numbers, the alignment of anything, or the order of evaluation of expressions. @cindex function usage Use functions freely. There are only a handful of compute-bound areas in @value{GDBN} that might be affected by the overhead of a function call, mainly in symbol reading. Most of @value{GDBN}'s performance is limited by the target interface (whether serial line or system call). However, use functions with moderation. A thousand one-line functions are just as hard to understand as a single thousand-line function. @emph{Macros are bad, M'kay.} (But if you have to use a macro, make sure that the macro arguments are protected with parentheses.) @cindex types Declarations like @samp{struct foo *} should be used in preference to declarations like @samp{typedef struct foo @{ @dots{} @} *foo_ptr}. @subsection Function Prototypes @cindex function prototypes Prototypes must be used when both @emph{declaring} and @emph{defining} a function. Prototypes for @value{GDBN} functions must include both the argument type and name, with the name matching that used in the actual function definition. All external functions should have a declaration in a header file that callers include, except for @code{_initialize_*} functions, which must be external so that @file{init.c} construction works, but shouldn't be visible to random source files. Where a source file needs a forward declaration of a static function, that declaration must appear in a block near the top of the source file. @subsection Internal Error Recovery During its execution, @value{GDBN} can encounter two types of errors. User errors and internal errors. User errors include not only a user entering an incorrect command but also problems arising from corrupt object files and system errors when interacting with the target. Internal errors include situations where @value{GDBN} has detected, at run time, a corrupt or erroneous situation. When reporting an internal error, @value{GDBN} uses @code{internal_error} and @code{gdb_assert}. @value{GDBN} must not call @code{abort} or @code{assert}. @emph{Pragmatics: There is no @code{internal_warning} function. Either the code detected a user error, recovered from it and issued a @code{warning} or the code failed to correctly recover from the user error and issued an @code{internal_error}.} @subsection File Names Any file used when building the core of @value{GDBN} must be in lower case. Any file used when building the core of @value{GDBN} must be 8.3 unique. These requirements apply to both source and generated files. @emph{Pragmatics: The core of @value{GDBN} must be buildable on many platforms including DJGPP and MacOS/HFS. Every time an unfriendly file is introduced to the build process both @file{Makefile.in} and @file{configure.in} need to be modified accordingly. Compare the convoluted conversion process needed to transform @file{COPYING} into @file{copying.c} with the conversion needed to transform @file{version.in} into @file{version.c}.} Any file non 8.3 compliant file (that is not used when building the core of @value{GDBN}) must be added to @file{gdb/config/djgpp/fnchange.lst}. @emph{Pragmatics: This is clearly a compromise.} When @value{GDBN} has a local version of a system header file (ex @file{string.h}) the file name based on the POSIX header prefixed with @file{gdb_} (@file{gdb_string.h}). These headers should be relatively independent: they should use only macros defined by @file{configure}, the compiler, or the host; they should include only system headers; they should refer only to system types. They may be shared between multiple programs, e.g.@: @value{GDBN} and @sc{gdbserver}. For other files @samp{-} is used as the separator. @subsection Include Files A @file{.c} file should include @file{defs.h} first. A @file{.c} file should directly include the @code{.h} file of every declaration and/or definition it directly refers to. It cannot rely on indirect inclusion. A @file{.h} file should directly include the @code{.h} file of every declaration and/or definition it directly refers to. It cannot rely on indirect inclusion. Exception: The file @file{defs.h} does not need to be directly included. An external declaration should only appear in one include file. An external declaration should never appear in a @code{.c} file. Exception: a declaration for the @code{_initialize} function that pacifies @option{-Wmissing-declaration}. A @code{typedef} definition should only appear in one include file. An opaque @code{struct} declaration can appear in multiple @file{.h} files. Where possible, a @file{.h} file should use an opaque @code{struct} declaration instead of an include. All @file{.h} files should be wrapped in: @smallexample #ifndef INCLUDE_FILE_NAME_H #define INCLUDE_FILE_NAME_H header body #endif @end smallexample @subsection Clean Design and Portable Implementation @cindex design In addition to getting the syntax right, there's the little question of semantics. Some things are done in certain ways in @value{GDBN} because long experience has shown that the more obvious ways caused various kinds of trouble. @cindex assumptions about targets You can't assume the byte order of anything that comes from a target (including @var{value}s, object files, and instructions). Such things must be byte-swapped using @code{SWAP_TARGET_AND_HOST} in @value{GDBN}, or one of the swap routines defined in @file{bfd.h}, such as @code{bfd_get_32}. You can't assume that you know what interface is being used to talk to the target system. All references to the target must go through the current @code{target_ops} vector. You can't assume that the host and target machines are the same machine (except in the ``native'' support modules). In particular, you can't assume that the target machine's header files will be available on the host machine. Target code must bring along its own header files -- written from scratch or explicitly donated by their owner, to avoid copyright problems. @cindex portability Insertion of new @code{#ifdef}'s will be frowned upon. It's much better to write the code portably than to conditionalize it for various systems. @cindex system dependencies New @code{#ifdef}'s which test for specific compilers or manufacturers or operating systems are unacceptable. All @code{#ifdef}'s should test for features. The information about which configurations contain which features should be segregated into the configuration files. Experience has proven far too often that a feature unique to one particular system often creeps into other systems; and that a conditional based on some predefined macro for your current system will become worthless over time, as new versions of your system come out that behave differently with regard to this feature. Adding code that handles specific architectures, operating systems, target interfaces, or hosts, is not acceptable in generic code. @cindex portable file name handling @cindex file names, portability One particularly notorious area where system dependencies tend to creep in is handling of file names. The mainline @value{GDBN} code assumes Posix semantics of file names: absolute file names begin with a forward slash @file{/}, slashes are used to separate leading directories, case-sensitive file names. These assumptions are not necessarily true on non-Posix systems such as MS-Windows. To avoid system-dependent code where you need to take apart or construct a file name, use the following portable macros: @table @code @findex HAVE_DOS_BASED_FILE_SYSTEM @item HAVE_DOS_BASED_FILE_SYSTEM This preprocessing symbol is defined to a non-zero value on hosts whose filesystems belong to the MS-DOS/MS-Windows family. Use this symbol to write conditional code which should only be compiled for such hosts. @findex IS_DIR_SEPARATOR @item IS_DIR_SEPARATOR (@var{c}) Evaluates to a non-zero value if @var{c} is a directory separator character. On Unix and GNU/Linux systems, only a slash @file{/} is such a character, but on Windows, both @file{/} and @file{\} will pass. @findex IS_ABSOLUTE_PATH @item IS_ABSOLUTE_PATH (@var{file}) Evaluates to a non-zero value if @var{file} is an absolute file name. For Unix and GNU/Linux hosts, a name which begins with a slash @file{/} is absolute. On DOS and Windows, @file{d:/foo} and @file{x:\bar} are also absolute file names. @findex FILENAME_CMP @item FILENAME_CMP (@var{f1}, @var{f2}) Calls a function which compares file names @var{f1} and @var{f2} as appropriate for the underlying host filesystem. For Posix systems, this simply calls @code{strcmp}; on case-insensitive filesystems it will call @code{strcasecmp} instead. @findex DIRNAME_SEPARATOR @item DIRNAME_SEPARATOR Evaluates to a character which separates directories in @code{PATH}-style lists, typically held in environment variables. This character is @samp{:} on Unix, @samp{;} on DOS and Windows. @findex SLASH_STRING @item SLASH_STRING This evaluates to a constant string you should use to produce an absolute filename from leading directories and the file's basename. @code{SLASH_STRING} is @code{"/"} on most systems, but might be @code{"\\"} for some Windows-based ports. @end table In addition to using these macros, be sure to use portable library functions whenever possible. For example, to extract a directory or a basename part from a file name, use the @code{dirname} and @code{basename} library functions (available in @code{libiberty} for platforms which don't provide them), instead of searching for a slash with @code{strrchr}. Another way to generalize @value{GDBN} along a particular interface is with an attribute struct. For example, @value{GDBN} has been generalized to handle multiple kinds of remote interfaces---not by @code{#ifdef}s everywhere, but by defining the @code{target_ops} structure and having a current target (as well as a stack of targets below it, for memory references). Whenever something needs to be done that depends on which remote interface we are using, a flag in the current target_ops structure is tested (e.g., @code{target_has_stack}), or a function is called through a pointer in the current target_ops structure. In this way, when a new remote interface is added, only one module needs to be touched---the one that actually implements the new remote interface. Other examples of attribute-structs are BFD access to multiple kinds of object file formats, or @value{GDBN}'s access to multiple source languages. Please avoid duplicating code. For example, in @value{GDBN} 3.x all the code interfacing between @code{ptrace} and the rest of @value{GDBN} was duplicated in @file{*-dep.c}, and so changing something was very painful. In @value{GDBN} 4.x, these have all been consolidated into @file{infptrace.c}. @file{infptrace.c} can deal with variations between systems the same way any system-independent file would (hooks, @code{#if defined}, etc.), and machines which are radically different don't need to use @file{infptrace.c} at all. All debugging code must be controllable using the @samp{set debug @var{module}} command. Do not use @code{printf} to print trace messages. Use @code{fprintf_unfiltered(gdb_stdlog, ...}. Do not use @code{#ifdef DEBUG}. @node Porting GDB @chapter Porting @value{GDBN} @cindex porting to new machines Most of the work in making @value{GDBN} compile on a new machine is in specifying the configuration of the machine. This is done in a dizzying variety of header files and configuration scripts, which we hope to make more sensible soon. Let's say your new host is called an @var{xyz} (e.g., @samp{sun4}), and its full three-part configuration name is @code{@var{arch}-@var{xvend}-@var{xos}} (e.g., @samp{sparc-sun-sunos4}). In particular: @itemize @bullet @item In the top level directory, edit @file{config.sub} and add @var{arch}, @var{xvend}, and @var{xos} to the lists of supported architectures, vendors, and operating systems near the bottom of the file. Also, add @var{xyz} as an alias that maps to @code{@var{arch}-@var{xvend}-@var{xos}}. You can test your changes by running @smallexample ./config.sub @var{xyz} @end smallexample @noindent and @smallexample ./config.sub @code{@var{arch}-@var{xvend}-@var{xos}} @end smallexample @noindent which should both respond with @code{@var{arch}-@var{xvend}-@var{xos}} and no error messages. @noindent You need to port BFD, if that hasn't been done already. Porting BFD is beyond the scope of this manual. @item To configure @value{GDBN} itself, edit @file{gdb/configure.host} to recognize your system and set @code{gdb_host} to @var{xyz}, and (unless your desired target is already available) also edit @file{gdb/configure.tgt}, setting @code{gdb_target} to something appropriate (for instance, @var{xyz}). @emph{Maintainer's note: Work in progress. The file @file{gdb/configure.host} originally needed to be modified when either a new native target or a new host machine was being added to @value{GDBN}. Recent changes have removed this requirement. The file now only needs to be modified when adding a new native configuration. This will likely changed again in the future.} @item Finally, you'll need to specify and define @value{GDBN}'s host-, native-, and target-dependent @file{.h} and @file{.c} files used for your configuration. @end itemize @node Versions and Branches @chapter Versions and Branches @section Versions @value{GDBN}'s version is determined by the file @file{gdb/version.in} and takes one of the following forms: @table @asis @item @var{major}.@var{minor} @itemx @var{major}.@var{minor}.@var{patchlevel} an official release (e.g., 6.2 or 6.2.1) @item @var{major}.@var{minor}.@var{patchlevel}.@var{YYYY}@var{MM}@var{DD} a snapshot taken at @var{YYYY}-@var{MM}-@var{DD}-gmt (e.g., 6.1.50.20020302, 6.1.90.20020304, or 6.1.0.20020308) @item @var{major}.@var{minor}.@var{patchlevel}.@var{YYYY}@var{MM}@var{DD}-cvs a @sc{cvs} check out drawn on @var{YYYY}-@var{MM}-@var{DD} (e.g., 6.1.50.20020302-cvs, 6.1.90.20020304-cvs, or 6.1.0.20020308-cvs) @item @var{major}.@var{minor}.@var{patchlevel}.@var{YYYY}@var{MM}@var{DD} (@var{vendor}) a vendor specific release of @value{GDBN}, that while based on@* @var{major}.@var{minor}.@var{patchlevel}.@var{YYYY}@var{MM}@var{DD}, may include additional changes @end table @value{GDBN}'s mainline uses the @var{major} and @var{minor} version numbers from the most recent release branch, with a @var{patchlevel} of 50. At the time each new release branch is created, the mainline's @var{major} and @var{minor} version numbers are updated. @value{GDBN}'s release branch is similar. When the branch is cut, the @var{patchlevel} is changed from 50 to 90. As draft releases are drawn from the branch, the @var{patchlevel} is incremented. Once the first release (@var{major}.@var{minor}) has been made, the @var{patchlevel} is set to 0 and updates have an incremented @var{patchlevel}. For snapshots, and @sc{cvs} check outs, it is also possible to identify the @sc{cvs} origin: @table @asis @item @var{major}.@var{minor}.50.@var{YYYY}@var{MM}@var{DD} drawn from the @sc{head} of mainline @sc{cvs} (e.g., 6.1.50.20020302) @item @var{major}.@var{minor}.90.@var{YYYY}@var{MM}@var{DD} @itemx @var{major}.@var{minor}.91.@var{YYYY}@var{MM}@var{DD} @dots{} drawn from a release branch prior to the release (e.g., 6.1.90.20020304) @item @var{major}.@var{minor}.0.@var{YYYY}@var{MM}@var{DD} @itemx @var{major}.@var{minor}.1.@var{YYYY}@var{MM}@var{DD} @dots{} drawn from a release branch after the release (e.g., 6.2.0.20020308) @end table If the previous @value{GDBN} version is 6.1 and the current version is 6.2, then, substituting 6 for @var{major} and 1 or 2 for @var{minor}, here's an illustration of a typical sequence: @smallexample <HEAD> | 6.1.50.20020302-cvs | +--------------------------. | <gdb_6_2-branch> | | 6.2.50.20020303-cvs 6.1.90 (draft #1) | | 6.2.50.20020304-cvs 6.1.90.20020304-cvs | | 6.2.50.20020305-cvs 6.1.91 (draft #2) | | 6.2.50.20020306-cvs 6.1.91.20020306-cvs | | 6.2.50.20020307-cvs 6.2 (release) | | 6.2.50.20020308-cvs 6.2.0.20020308-cvs | | 6.2.50.20020309-cvs 6.2.1 (update) | | 6.2.50.20020310-cvs <branch closed> | 6.2.50.20020311-cvs | +--------------------------. | <gdb_6_3-branch> | | 6.3.50.20020312-cvs 6.2.90 (draft #1) | | @end smallexample @section Release Branches @cindex Release Branches @value{GDBN} draws a release series (6.2, 6.2.1, @dots{}) from a single release branch, and identifies that branch using the @sc{cvs} branch tags: @smallexample gdb_@var{major}_@var{minor}-@var{YYYY}@var{MM}@var{DD}-branchpoint gdb_@var{major}_@var{minor}-branch gdb_@var{major}_@var{minor}-@var{YYYY}@var{MM}@var{DD}-release @end smallexample @emph{Pragmatics: To help identify the date at which a branch or release is made, both the branchpoint and release tags include the date that they are cut (@var{YYYY}@var{MM}@var{DD}) in the tag. The branch tag, denoting the head of the branch, does not need this.} @section Vendor Branches @cindex vendor branches To avoid version conflicts, vendors are expected to modify the file @file{gdb/version.in} to include a vendor unique alphabetic identifier (an official @value{GDBN} release never uses alphabetic characters in its version identifer). E.g., @samp{6.2widgit2}, or @samp{6.2 (Widgit Inc Patch 2)}. @section Experimental Branches @cindex experimental branches @subsection Guidelines @value{GDBN} permits the creation of branches, cut from the @sc{cvs} repository, for experimental development. Branches make it possible for developers to share preliminary work, and maintainers to examine significant new developments. The following are a set of guidelines for creating such branches: @table @emph @item a branch has an owner The owner can set further policy for a branch, but may not change the ground rules. In particular, they can set a policy for commits (be it adding more reviewers or deciding who can commit). @item all commits are posted All changes committed to a branch shall also be posted to @email{gdb-patches@@sources.redhat.com, the @value{GDBN} patches mailing list}. While commentary on such changes are encouraged, people should remember that the changes only apply to a branch. @item all commits are covered by an assignment This ensures that all changes belong to the Free Software Foundation, and avoids the possibility that the branch may become contaminated. @item a branch is focused A focused branch has a single objective or goal, and does not contain unnecessary or irrelevant changes. Cleanups, where identified, being be pushed into the mainline as soon as possible. @item a branch tracks mainline This keeps the level of divergence under control. It also keeps the pressure on developers to push cleanups and other stuff into the mainline. @item a branch shall contain the entire @value{GDBN} module The @value{GDBN} module @code{gdb} should be specified when creating a branch (branches of individual files should be avoided). @xref{Tags}. @item a branch shall be branded using @file{version.in} The file @file{gdb/version.in} shall be modified so that it identifies the branch @var{owner} and branch @var{name}, e.g., @samp{6.2.50.20030303_owner_name} or @samp{6.2 (Owner Name)}. @end table @subsection Tags @anchor{Tags} To simplify the identification of @value{GDBN} branches, the following branch tagging convention is strongly recommended: @table @code @item @var{owner}_@var{name}-@var{YYYYMMDD}-branchpoint @itemx @var{owner}_@var{name}-@var{YYYYMMDD}-branch The branch point and corresponding branch tag. @var{YYYYMMDD} is the date that the branch was created. A branch is created using the sequence: @anchor{experimental branch tags} @smallexample cvs rtag @var{owner}_@var{name}-@var{YYYYMMDD}-branchpoint gdb cvs rtag -b -r @var{owner}_@var{name}-@var{YYYYMMDD}-branchpoint \ @var{owner}_@var{name}-@var{YYYYMMDD}-branch gdb @end smallexample @item @var{owner}_@var{name}-@var{yyyymmdd}-mergepoint The tagged point, on the mainline, that was used when merging the branch on @var{yyyymmdd}. To merge in all changes since the branch was cut, use a command sequence like: @smallexample cvs rtag @var{owner}_@var{name}-@var{yyyymmdd}-mergepoint gdb cvs update \ -j@var{owner}_@var{name}-@var{YYYYMMDD}-branchpoint -j@var{owner}_@var{name}-@var{yyyymmdd}-mergepoint @end smallexample @noindent Similar sequences can be used to just merge in changes since the last merge. @end table @noindent For further information on @sc{cvs}, see @uref{http://www.gnu.org/software/cvs/, Concurrent Versions System}. @node Releasing GDB @chapter Releasing @value{GDBN} @cindex making a new release of gdb @section Branch Commit Policy The branch commit policy is pretty slack. @value{GDBN} releases 5.0, 5.1 and 5.2 all used the below: @itemize @bullet @item The @file{gdb/MAINTAINERS} file still holds. @item Don't fix something on the branch unless/until it is also fixed in the trunk. If this isn't possible, mentioning it in the @file{gdb/PROBLEMS} file is better than committing a hack. @item When considering a patch for the branch, suggested criteria include: Does it fix a build? Does it fix the sequence @kbd{break main; run} when debugging a static binary? @item The further a change is from the core of @value{GDBN}, the less likely the change will worry anyone (e.g., target specific code). @item Only post a proposal to change the core of @value{GDBN} after you've sent individual bribes to all the people listed in the @file{MAINTAINERS} file @t{;-)} @end itemize @emph{Pragmatics: Provided updates are restricted to non-core functionality there is little chance that a broken change will be fatal. This means that changes such as adding a new architectures or (within reason) support for a new host are considered acceptable.} @section Obsoleting code Before anything else, poke the other developers (and around the source code) to see if there is anything that can be removed from @value{GDBN} (an old target, an unused file). Obsolete code is identified by adding an @code{OBSOLETE} prefix to every line. Doing this means that it is easy to identify something that has been obsoleted when greping through the sources. The process is done in stages --- this is mainly to ensure that the wider @value{GDBN} community has a reasonable opportunity to respond. Remember, everything on the Internet takes a week. @enumerate @item Post the proposal on @email{gdb@@sources.redhat.com, the GDB mailing list} Creating a bug report to track the task's state, is also highly recommended. @item Wait a week or so. @item Post the proposal on @email{gdb-announce@@sources.redhat.com, the GDB Announcement mailing list}. @item Wait a week or so. @item Go through and edit all relevant files and lines so that they are prefixed with the word @code{OBSOLETE}. @item Wait until the next GDB version, containing this obsolete code, has been released. @item Remove the obsolete code. @end enumerate @noindent @emph{Maintainer note: While removing old code is regrettable it is hopefully better for @value{GDBN}'s long term development. Firstly it helps the developers by removing code that is either no longer relevant or simply wrong. Secondly since it removes any history associated with the file (effectively clearing the slate) the developer has a much freer hand when it comes to fixing broken files.} @section Before the Branch The most important objective at this stage is to find and fix simple changes that become a pain to track once the branch is created. For instance, configuration problems that stop @value{GDBN} from even building. If you can't get the problem fixed, document it in the @file{gdb/PROBLEMS} file. @subheading Prompt for @file{gdb/NEWS} People always forget. Send a post reminding them but also if you know something interesting happened add it yourself. The @code{schedule} script will mention this in its e-mail. @subheading Review @file{gdb/README} Grab one of the nightly snapshots and then walk through the @file{gdb/README} looking for anything that can be improved. The @code{schedule} script will mention this in its e-mail. @subheading Refresh any imported files. A number of files are taken from external repositories. They include: @itemize @bullet @item @file{texinfo/texinfo.tex} @item @file{config.guess} et.@: al.@: (see the top-level @file{MAINTAINERS} file) @item @file{etc/standards.texi}, @file{etc/make-stds.texi} @end itemize @subheading Check the ARI @uref{http://sources.redhat.com/gdb/ari,,A.R.I.} is an @code{awk} script (Awk Regression Index ;-) that checks for a number of errors and coding conventions. The checks include things like using @code{malloc} instead of @code{xmalloc} and file naming problems. There shouldn't be any regressions. @subsection Review the bug data base Close anything obviously fixed. @subsection Check all cross targets build The targets are listed in @file{gdb/MAINTAINERS}. @section Cut the Branch @subheading Create the branch @smallexample $ u=5.1 $ v=5.2 $ V=`echo $v | sed 's/\./_/g'` $ D=`date -u +%Y-%m-%d` $ echo $u $V $D 5.1 5_2 2002-03-03 $ echo cvs -f -d :ext:sources.redhat.com:/cvs/src rtag \ -D $D-gmt gdb_$V-$D-branchpoint insight+dejagnu cvs -f -d :ext:sources.redhat.com:/cvs/src rtag -D 2002-03-03-gmt gdb_5_2-2002-03-03-branchpoint insight+dejagnu $ ^echo ^^ ... $ echo cvs -f -d :ext:sources.redhat.com:/cvs/src rtag \ -b -r gdb_$V-$D-branchpoint gdb_$V-branch insight+dejagnu cvs -f -d :ext:sources.redhat.com:/cvs/src rtag \ -b -r gdb_5_2-2002-03-03-branchpoint gdb_5_2-branch insight+dejagnu $ ^echo ^^ ... $ @end smallexample @itemize @bullet @item by using @kbd{-D YYYY-MM-DD-gmt} the branch is forced to an exact date/time. @item the trunk is first taged so that the branch point can easily be found @item Insight (which includes GDB) and dejagnu are all tagged at the same time @item @file{version.in} gets bumped to avoid version number conflicts @item the reading of @file{.cvsrc} is disabled using @file{-f} @end itemize @subheading Update @file{version.in} @smallexample $ u=5.1 $ v=5.2 $ V=`echo $v | sed 's/\./_/g'` $ echo $u $v$V 5.1 5_2 $ cd /tmp $ echo cvs -f -d :ext:sources.redhat.com:/cvs/src co \ -r gdb_$V-branch src/gdb/version.in cvs -f -d :ext:sources.redhat.com:/cvs/src co -r gdb_5_2-branch src/gdb/version.in $ ^echo ^^ U src/gdb/version.in $ cd src/gdb $ echo $u.90-0000-00-00-cvs > version.in $ cat version.in 5.1.90-0000-00-00-cvs $ cvs -f commit version.in @end smallexample @itemize @bullet @item @file{0000-00-00} is used as a date to pump prime the version.in update mechanism @item @file{.90} and the previous branch version are used as fairly arbitrary initial branch version number @end itemize @subheading Update the web and news pages Something? @subheading Tweak cron to track the new branch The file @file{gdbadmin/cron/crontab} contains gdbadmin's cron table. This file needs to be updated so that: @itemize @bullet @item a daily timestamp is added to the file @file{version.in} @item the new branch is included in the snapshot process @end itemize @noindent See the file @file{gdbadmin/cron/README} for how to install the updated cron table. The file @file{gdbadmin/ss/README} should also be reviewed to reflect any changes. That file is copied to both the branch/ and current/ snapshot directories. @subheading Update the NEWS and README files The @file{NEWS} file needs to be updated so that on the branch it refers to @emph{changes in the current release} while on the trunk it also refers to @emph{changes since the current release}. The @file{README} file needs to be updated so that it refers to the current release. @subheading Post the branch info Send an announcement to the mailing lists: @itemize @bullet @item @email{gdb-announce@@sources.redhat.com, GDB Announcement mailing list} @item @email{gdb@@sources.redhat.com, GDB Discsussion mailing list} and @email{gdb-testers@@sources.redhat.com, GDB Discsussion mailing list} @end itemize @emph{Pragmatics: The branch creation is sent to the announce list to ensure that people people not subscribed to the higher volume discussion list are alerted.} The announcement should include: @itemize @bullet @item the branch tag @item how to check out the branch using CVS @item the date/number of weeks until the release @item the branch commit policy still holds. @end itemize @section Stabilize the branch Something goes here. @section Create a Release The process of creating and then making available a release is broken down into a number of stages. The first part addresses the technical process of creating a releasable tar ball. The later stages address the process of releasing that tar ball. When making a release candidate just the first section is needed. @subsection Create a release candidate The objective at this stage is to create a set of tar balls that can be made available as a formal release (or as a less formal release candidate). @subsubheading Freeze the branch Send out an e-mail notifying everyone that the branch is frozen to @email{gdb-patches@@sources.redhat.com}. @subsubheading Establish a few defaults. @smallexample $ b=gdb_5_2-branch $ v=5.2 $ t=/sourceware/snapshot-tmp/gdbadmin-tmp $ echo $t/$b/$v /sourceware/snapshot-tmp/gdbadmin-tmp/gdb_5_2-branch/5.2 $ mkdir -p $t/$b/$v $ cd $t/$b/$v $ pwd /sourceware/snapshot-tmp/gdbadmin-tmp/gdb_5_2-branch/5.2 $ which autoconf /home/gdbadmin/bin/autoconf $ @end smallexample @noindent Notes: @itemize @bullet @item Check the @code{autoconf} version carefully. You want to be using the version taken from the @file{binutils} snapshot directory, which can be found at @uref{ftp://sources.redhat.com/pub/binutils/}. It is very unlikely that a system installed version of @code{autoconf} (e.g., @file{/usr/bin/autoconf}) is correct. @end itemize @subsubheading Check out the relevant modules: @smallexample $ for m in gdb insight dejagnu do ( mkdir -p $m && cd $m && cvs -q -f -d /cvs/src co -P -r $b $m ) done $ @end smallexample @noindent Note: @itemize @bullet @item The reading of @file{.cvsrc} is disabled (@file{-f}) so that there isn't any confusion between what is written here and what your local @code{cvs} really does. @end itemize @subsubheading Update relevant files. @table @file @item gdb/NEWS Major releases get their comments added as part of the mainline. Minor releases should probably mention any significant bugs that were fixed. Don't forget to include the @file{ChangeLog} entry. @smallexample $ emacs gdb/src/gdb/NEWS ... c-x 4 a ... c-x c-s c-x c-c $ cp gdb/src/gdb/NEWS insight/src/gdb/NEWS $ cp gdb/src/gdb/ChangeLog insight/src/gdb/ChangeLog @end smallexample @item gdb/README You'll need to update: @itemize @bullet @item the version @item the update date @item who did it @end itemize @smallexample $ emacs gdb/src/gdb/README ... c-x 4 a ... c-x c-s c-x c-c $ cp gdb/src/gdb/README insight/src/gdb/README $ cp gdb/src/gdb/ChangeLog insight/src/gdb/ChangeLog @end smallexample @emph{Maintainer note: Hopefully the @file{README} file was reviewed before the initial branch was cut so just a simple substitute is needed to get it updated.} @emph{Maintainer note: Other projects generate @file{README} and @file{INSTALL} from the core documentation. This might be worth pursuing.} @item gdb/version.in @smallexample $ echo $v > gdb/src/gdb/version.in $ cat gdb/src/gdb/version.in 5.2 $ emacs gdb/src/gdb/version.in ... c-x 4 a ... Bump to version ... c-x c-s c-x c-c $ cp gdb/src/gdb/version.in insight/src/gdb/version.in $ cp gdb/src/gdb/ChangeLog insight/src/gdb/ChangeLog @end smallexample @item dejagnu/src/dejagnu/configure.in Dejagnu is more complicated. The version number is a parameter to @code{AM_INIT_AUTOMAKE}. Tweak it to read something like gdb-5.1.91. Don't forget to re-generate @file{configure}. Don't forget to include a @file{ChangeLog} entry. @smallexample $ emacs dejagnu/src/dejagnu/configure.in ... c-x 4 a ... c-x c-s c-x c-c $ ( cd dejagnu/src/dejagnu && autoconf ) @end smallexample @end table @subsubheading Do the dirty work This is identical to the process used to create the daily snapshot. @smallexample $ for m in gdb insight do ( cd $m/src && gmake -f src-release $m.tar ) done $ ( m=dejagnu; cd $m/src && gmake -f src-release $m.tar.bz2 ) @end smallexample If the top level source directory does not have @file{src-release} (@value{GDBN} version 5.3.1 or earlier), try these commands instead: @smallexample $ for m in gdb insight do ( cd $m/src && gmake -f Makefile.in $m.tar ) done $ ( m=dejagnu; cd $m/src && gmake -f Makefile.in $m.tar.bz2 ) @end smallexample @subsubheading Check the source files You're looking for files that have mysteriously disappeared. @kbd{distclean} has the habit of deleting files it shouldn't. Watch out for the @file{version.in} update @kbd{cronjob}. @smallexample $ ( cd gdb/src && cvs -f -q -n update ) M djunpack.bat ? gdb-5.1.91.tar ? proto-toplev @dots{} lots of generated files @dots{} M gdb/ChangeLog M gdb/NEWS M gdb/README M gdb/version.in @dots{} lots of generated files @dots{} $ @end smallexample @noindent @emph{Don't worry about the @file{gdb.info-??} or @file{gdb/p-exp.tab.c}. They were generated (and yes @file{gdb.info-1} was also generated only something strange with CVS means that they didn't get supressed). Fixing it would be nice though.} @subsubheading Create compressed versions of the release @smallexample $ cp */src/*.tar . $ cp */src/*.bz2 . $ ls -F dejagnu/ dejagnu-gdb-5.2.tar.bz2 gdb/ gdb-5.2.tar insight/ insight-5.2.tar $ for m in gdb insight do bzip2 -v -9 -c $m-$v.tar > $m-$v.tar.bz2 gzip -v -9 -c $m-$v.tar > $m-$v.tar.gz done $ @end smallexample @noindent Note: @itemize @bullet @item A pipe such as @kbd{bunzip2 < xxx.bz2 | gzip -9 > xxx.gz} is not since, in that mode, @code{gzip} does not know the name of the file and, hence, can not include it in the compressed file. This is also why the release process runs @code{tar} and @code{bzip2} as separate passes. @end itemize @subsection Sanity check the tar ball Pick a popular machine (Solaris/PPC?) and try the build on that. @smallexample $ bunzip2 < gdb-5.2.tar.bz2 | tar xpf - $ cd gdb-5.2 $ ./configure $ make @dots{} $ ./gdb/gdb ./gdb/gdb GNU gdb 5.2 @dots{} (gdb) b main Breakpoint 1 at 0x80732bc: file main.c, line 734. (gdb) run Starting program: /tmp/gdb-5.2/gdb/gdb Breakpoint 1, main (argc=1, argv=0xbffff8b4) at main.c:734 734 catch_errors (captured_main, &args, "", RETURN_MASK_ALL); (gdb) print args $1 = @{argc = 136426532, argv = 0x821b7f0@} (gdb) @end smallexample @subsection Make a release candidate available If this is a release candidate then the only remaining steps are: @enumerate @item Commit @file{version.in} and @file{ChangeLog} @item Tweak @file{version.in} (and @file{ChangeLog} to read @var{L}.@var{M}.@var{N}-0000-00-00-cvs so that the version update process can restart. @item Make the release candidate available in @uref{ftp://sources.redhat.com/pub/gdb/snapshots/branch} @item Notify the relevant mailing lists ( @email{gdb@@sources.redhat.com} and @email{gdb-testers@@sources.redhat.com} that the candidate is available. @end enumerate @subsection Make a formal release available (And you thought all that was required was to post an e-mail.) @subsubheading Install on sware Copy the new files to both the release and the old release directory: @smallexample $ cp *.bz2 *.gz ~ftp/pub/gdb/old-releases/ $ cp *.bz2 *.gz ~ftp/pub/gdb/releases @end smallexample @noindent Clean up the releases directory so that only the most recent releases are available (e.g. keep 5.2 and 5.2.1 but remove 5.1): @smallexample $ cd ~ftp/pub/gdb/releases $ rm @dots{} @end smallexample @noindent Update the file @file{README} and @file{.message} in the releases directory: @smallexample $ vi README @dots{} $ rm -f .message $ ln README .message @end smallexample @subsubheading Update the web pages. @table @file @item htdocs/download/ANNOUNCEMENT This file, which is posted as the official announcement, includes: @itemize @bullet @item General announcement @item News. If making an @var{M}.@var{N}.1 release, retain the news from earlier @var{M}.@var{N} release. @item Errata @end itemize @item htdocs/index.html @itemx htdocs/news/index.html @itemx htdocs/download/index.html These files include: @itemize @bullet @item announcement of the most recent release @item news entry (remember to update both the top level and the news directory). @end itemize These pages also need to be regenerate using @code{index.sh}. @item download/onlinedocs/ You need to find the magic command that is used to generate the online docs from the @file{.tar.bz2}. The best way is to look in the output from one of the nightly @code{cron} jobs and then just edit accordingly. Something like: @smallexample $ ~/ss/update-web-docs \ ~ftp/pub/gdb/releases/gdb-5.2.tar.bz2 \ $PWD/www \ /www/sourceware/htdocs/gdb/download/onlinedocs \ gdb @end smallexample @item download/ari/ Just like the online documentation. Something like: @smallexample $ /bin/sh ~/ss/update-web-ari \ ~ftp/pub/gdb/releases/gdb-5.2.tar.bz2 \ $PWD/www \ /www/sourceware/htdocs/gdb/download/ari \ gdb @end smallexample @end table @subsubheading Shadow the pages onto gnu Something goes here. @subsubheading Install the @value{GDBN} tar ball on GNU At the time of writing, the GNU machine was @kbd{gnudist.gnu.org} in @file{~ftp/gnu/gdb}. @subsubheading Make the @file{ANNOUNCEMENT} Post the @file{ANNOUNCEMENT} file you created above to: @itemize @bullet @item @email{gdb-announce@@sources.redhat.com, GDB Announcement mailing list} @item @email{info-gnu@@gnu.org, General GNU Announcement list} (but delay it a day or so to let things get out) @item @email{bug-gdb@@gnu.org, GDB Bug Report mailing list} @end itemize @subsection Cleanup The release is out but you're still not finished. @subsubheading Commit outstanding changes In particular you'll need to commit any changes to: @itemize @bullet @item @file{gdb/ChangeLog} @item @file{gdb/version.in} @item @file{gdb/NEWS} @item @file{gdb/README} @end itemize @subsubheading Tag the release Something like: @smallexample $ d=`date -u +%Y-%m-%d` $ echo $d 2002-01-24 $ ( cd insight/src/gdb && cvs -f -q update ) $ ( cd insight/src && cvs -f -q tag gdb_5_2-$d-release ) @end smallexample Insight is used since that contains more of the release than @value{GDBN} (@code{dejagnu} doesn't get tagged but I think we can live with that). @subsubheading Mention the release on the trunk Just put something in the @file{ChangeLog} so that the trunk also indicates when the release was made. @subsubheading Restart @file{gdb/version.in} If @file{gdb/version.in} does not contain an ISO date such as @kbd{2002-01-24} then the daily @code{cronjob} won't update it. Having committed all the release changes it can be set to @file{5.2.0_0000-00-00-cvs} which will restart things (yes the @kbd{_} is important - it affects the snapshot process). Don't forget the @file{ChangeLog}. @subsubheading Merge into trunk The files committed to the branch may also need changes merged into the trunk. @subsubheading Revise the release schedule Post a revised release schedule to @email{gdb@@sources.redhat.com, GDB Discussion List} with an updated announcement. The schedule can be generated by running: @smallexample $ ~/ss/schedule `date +%s` schedule @end smallexample @noindent The first parameter is approximate date/time in seconds (from the epoch) of the most recent release. Also update the schedule @code{cronjob}. @section Post release Remove any @code{OBSOLETE} code. @node Testsuite @chapter Testsuite @cindex test suite The testsuite is an important component of the @value{GDBN} package. While it is always worthwhile to encourage user testing, in practice this is rarely sufficient; users typically use only a small subset of the available commands, and it has proven all too common for a change to cause a significant regression that went unnoticed for some time. The @value{GDBN} testsuite uses the DejaGNU testing framework. DejaGNU is built using @code{Tcl} and @code{expect}. The tests themselves are calls to various @code{Tcl} procs; the framework runs all the procs and summarizes the passes and fails. @section Using the Testsuite @cindex running the test suite To run the testsuite, simply go to the @value{GDBN} object directory (or to the testsuite's objdir) and type @code{make check}. This just sets up some environment variables and invokes DejaGNU's @code{runtest} script. While the testsuite is running, you'll get mentions of which test file is in use, and a mention of any unexpected passes or fails. When the testsuite is finished, you'll get a summary that looks like this: @smallexample === gdb Summary === # of expected passes 6016 # of unexpected failures 58 # of unexpected successes 5 # of expected failures 183 # of unresolved testcases 3 # of untested testcases 5 @end smallexample The ideal test run consists of expected passes only; however, reality conspires to keep us from this ideal. Unexpected failures indicate real problems, whether in @value{GDBN} or in the testsuite. Expected failures are still failures, but ones which have been decided are too hard to deal with at the time; for instance, a test case might work everywhere except on AIX, and there is no prospect of the AIX case being fixed in the near future. Expected failures should not be added lightly, since you may be masking serious bugs in @value{GDBN}. Unexpected successes are expected fails that are passing for some reason, while unresolved and untested cases often indicate some minor catastrophe, such as the compiler being unable to deal with a test program. When making any significant change to @value{GDBN}, you should run the testsuite before and after the change, to confirm that there are no regressions. Note that truly complete testing would require that you run the testsuite with all supported configurations and a variety of compilers; however this is more than really necessary. In many cases testing with a single configuration is sufficient. Other useful options are to test one big-endian (Sparc) and one little-endian (x86) host, a cross config with a builtin simulator (powerpc-eabi, mips-elf), or a 64-bit host (Alpha). If you add new functionality to @value{GDBN}, please consider adding tests for it as well; this way future @value{GDBN} hackers can detect and fix their changes that break the functionality you added. Similarly, if you fix a bug that was not previously reported as a test failure, please add a test case for it. Some cases are extremely difficult to test, such as code that handles host OS failures or bugs in particular versions of compilers, and it's OK not to try to write tests for all of those. DejaGNU supports separate build, host, and target machines. However, some @value{GDBN} test scripts do not work if the build machine and the host machine are not the same. In such an environment, these scripts will give a result of ``UNRESOLVED'', like this: @smallexample UNRESOLVED: gdb.base/example.exp: This test script does not work on a remote host. @end smallexample @section Testsuite Organization @cindex test suite organization The testsuite is entirely contained in @file{gdb/testsuite}. While the testsuite includes some makefiles and configury, these are very minimal, and used for little besides cleaning up, since the tests themselves handle the compilation of the programs that @value{GDBN} will run. The file @file{testsuite/lib/gdb.exp} contains common utility procs useful for all @value{GDBN} tests, while the directory @file{testsuite/config} contains configuration-specific files, typically used for special-purpose definitions of procs like @code{gdb_load} and @code{gdb_start}. The tests themselves are to be found in @file{testsuite/gdb.*} and subdirectories of those. The names of the test files must always end with @file{.exp}. DejaGNU collects the test files by wildcarding in the test directories, so both subdirectories and individual files get chosen and run in alphabetical order. The following table lists the main types of subdirectories and what they are for. Since DejaGNU finds test files no matter where they are located, and since each test file sets up its own compilation and execution environment, this organization is simply for convenience and intelligibility. @table @file @item gdb.base This is the base testsuite. The tests in it should apply to all configurations of @value{GDBN} (but generic native-only tests may live here). The test programs should be in the subset of C that is valid K&R, ANSI/ISO, and C@t{++} (@code{#ifdef}s are allowed if necessary, for instance for prototypes). @item gdb.@var{lang} Language-specific tests for any language @var{lang} besides C. Examples are @file{gdb.cp} and @file{gdb.java}. @item gdb.@var{platform} Non-portable tests. The tests are specific to a specific configuration (host or target), such as HP-UX or eCos. Example is @file{gdb.hp}, for HP-UX. @item gdb.@var{compiler} Tests specific to a particular compiler. As of this writing (June 1999), there aren't currently any groups of tests in this category that couldn't just as sensibly be made platform-specific, but one could imagine a @file{gdb.gcc}, for tests of @value{GDBN}'s handling of GCC extensions. @item gdb.@var{subsystem} Tests that exercise a specific @value{GDBN} subsystem in more depth. For instance, @file{gdb.disasm} exercises various disassemblers, while @file{gdb.stabs} tests pathways through the stabs symbol reader. @end table @section Writing Tests @cindex writing tests In many areas, the @value{GDBN} tests are already quite comprehensive; you should be able to copy existing tests to handle new cases. You should try to use @code{gdb_test} whenever possible, since it includes cases to handle all the unexpected errors that might happen. However, it doesn't cost anything to add new test procedures; for instance, @file{gdb.base/exprs.exp} defines a @code{test_expr} that calls @code{gdb_test} multiple times. Only use @code{send_gdb} and @code{gdb_expect} when absolutely necessary, such as when @value{GDBN} has several valid responses to a command. The source language programs do @emph{not} need to be in a consistent style. Since @value{GDBN} is used to debug programs written in many different styles, it's worth having a mix of styles in the testsuite; for instance, some @value{GDBN} bugs involving the display of source lines would never manifest themselves if the programs used GNU coding style uniformly. @node Hints @chapter Hints Check the @file{README} file, it often has useful information that does not appear anywhere else in the directory. @menu * Getting Started:: Getting started working on @value{GDBN} * Debugging GDB:: Debugging @value{GDBN} with itself @end menu @node Getting Started,,, Hints @section Getting Started @value{GDBN} is a large and complicated program, and if you first starting to work on it, it can be hard to know where to start. Fortunately, if you know how to go about it, there are ways to figure out what is going on. This manual, the @value{GDBN} Internals manual, has information which applies generally to many parts of @value{GDBN}. Information about particular functions or data structures are located in comments with those functions or data structures. If you run across a function or a global variable which does not have a comment correctly explaining what is does, this can be thought of as a bug in @value{GDBN}; feel free to submit a bug report, with a suggested comment if you can figure out what the comment should say. If you find a comment which is actually wrong, be especially sure to report that. Comments explaining the function of macros defined in host, target, or native dependent files can be in several places. Sometimes they are repeated every place the macro is defined. Sometimes they are where the macro is used. Sometimes there is a header file which supplies a default definition of the macro, and the comment is there. This manual also documents all the available macros. @c (@pxref{Host Conditionals}, @pxref{Target @c Conditionals}, @pxref{Native Conditionals}, and @pxref{Obsolete @c Conditionals}) Start with the header files. Once you have some idea of how @value{GDBN}'s internal symbol tables are stored (see @file{symtab.h}, @file{gdbtypes.h}), you will find it much easier to understand the code which uses and creates those symbol tables. You may wish to process the information you are getting somehow, to enhance your understanding of it. Summarize it, translate it to another language, add some (perhaps trivial or non-useful) feature to @value{GDBN}, use the code to predict what a test case would do and write the test case and verify your prediction, etc. If you are reading code and your eyes are starting to glaze over, this is a sign you need to use a more active approach. Once you have a part of @value{GDBN} to start with, you can find more specifically the part you are looking for by stepping through each function with the @code{next} command. Do not use @code{step} or you will quickly get distracted; when the function you are stepping through calls another function try only to get a big-picture understanding (perhaps using the comment at the beginning of the function being called) of what it does. This way you can identify which of the functions being called by the function you are stepping through is the one which you are interested in. You may need to examine the data structures generated at each stage, with reference to the comments in the header files explaining what the data structures are supposed to look like. Of course, this same technique can be used if you are just reading the code, rather than actually stepping through it. The same general principle applies---when the code you are looking at calls something else, just try to understand generally what the code being called does, rather than worrying about all its details. @cindex command implementation A good place to start when tracking down some particular area is with a command which invokes that feature. Suppose you want to know how single-stepping works. As a @value{GDBN} user, you know that the @code{step} command invokes single-stepping. The command is invoked via command tables (see @file{command.h}); by convention the function which actually performs the command is formed by taking the name of the command and adding @samp{_command}, or in the case of an @code{info} subcommand, @samp{_info}. For example, the @code{step} command invokes the @code{step_command} function and the @code{info display} command invokes @code{display_info}. When this convention is not followed, you might have to use @code{grep} or @kbd{M-x tags-search} in emacs, or run @value{GDBN} on itself and set a breakpoint in @code{execute_command}. @cindex @code{bug-gdb} mailing list If all of the above fail, it may be appropriate to ask for information on @code{bug-gdb}. But @emph{never} post a generic question like ``I was wondering if anyone could give me some tips about understanding @value{GDBN}''---if we had some magic secret we would put it in this manual. Suggestions for improving the manual are always welcome, of course. @node Debugging GDB,,,Hints @section Debugging @value{GDBN} with itself @cindex debugging @value{GDBN} If @value{GDBN} is limping on your machine, this is the preferred way to get it fully functional. Be warned that in some ancient Unix systems, like Ultrix 4.2, a program can't be running in one process while it is being debugged in another. Rather than typing the command @kbd{@w{./gdb ./gdb}}, which works on Suns and such, you can copy @file{gdb} to @file{gdb2} and then type @kbd{@w{./gdb ./gdb2}}. When you run @value{GDBN} in the @value{GDBN} source directory, it will read a @file{.gdbinit} file that sets up some simple things to make debugging gdb easier. The @code{info} command, when executed without a subcommand in a @value{GDBN} being debugged by gdb, will pop you back up to the top level gdb. See @file{.gdbinit} for details. If you use emacs, you will probably want to do a @code{make TAGS} after you configure your distribution; this will put the machine dependent routines for your local machine where they will be accessed first by @kbd{M-.} Also, make sure that you've either compiled @value{GDBN} with your local cc, or have run @code{fixincludes} if you are compiling with gcc. @section Submitting Patches @cindex submitting patches Thanks for thinking of offering your changes back to the community of @value{GDBN} users. In general we like to get well designed enhancements. Thanks also for checking in advance about the best way to transfer the changes. The @value{GDBN} maintainers will only install ``cleanly designed'' patches. This manual summarizes what we believe to be clean design for @value{GDBN}. If the maintainers don't have time to put the patch in when it arrives, or if there is any question about a patch, it goes into a large queue with everyone else's patches and bug reports. @cindex legal papers for code contributions The legal issue is that to incorporate substantial changes requires a copyright assignment from you and/or your employer, granting ownership of the changes to the Free Software Foundation. You can get the standard documents for doing this by sending mail to @code{gnu@@gnu.org} and asking for it. We recommend that people write in "All programs owned by the Free Software Foundation" as "NAME OF PROGRAM", so that changes in many programs (not just @value{GDBN}, but GAS, Emacs, GCC, etc) can be contributed with only one piece of legalese pushed through the bureaucracy and filed with the FSF. We can't start merging changes until this paperwork is received by the FSF (their rules, which we follow since we maintain it for them). Technically, the easiest way to receive changes is to receive each feature as a small context diff or unidiff, suitable for @code{patch}. Each message sent to me should include the changes to C code and header files for a single feature, plus @file{ChangeLog} entries for each directory where files were modified, and diffs for any changes needed to the manuals (@file{gdb/doc/gdb.texinfo} or @file{gdb/doc/gdbint.texinfo}). If there are a lot of changes for a single feature, they can be split down into multiple messages. In this way, if we read and like the feature, we can add it to the sources with a single patch command, do some testing, and check it in. If you leave out the @file{ChangeLog}, we have to write one. If you leave out the doc, we have to puzzle out what needs documenting. Etc., etc. The reason to send each change in a separate message is that we will not install some of the changes. They'll be returned to you with questions or comments. If we're doing our job correctly, the message back to you will say what you have to fix in order to make the change acceptable. The reason to have separate messages for separate features is so that the acceptable changes can be installed while one or more changes are being reworked. If multiple features are sent in a single message, we tend to not put in the effort to sort out the acceptable changes from the unacceptable, so none of the features get installed until all are acceptable. If this sounds painful or authoritarian, well, it is. But we get a lot of bug reports and a lot of patches, and many of them don't get installed because we don't have the time to finish the job that the bug reporter or the contributor could have done. Patches that arrive complete, working, and well designed, tend to get installed on the day they arrive. The others go into a queue and get installed as time permits, which, since the maintainers have many demands to meet, may not be for quite some time. Please send patches directly to @email{gdb-patches@@sources.redhat.com, the @value{GDBN} maintainers}. @section Obsolete Conditionals @cindex obsolete code Fragments of old code in @value{GDBN} sometimes reference or set the following configuration macros. They should not be used by new code, and old uses should be removed as those parts of the debugger are otherwise touched. @table @code @item STACK_END_ADDR This macro used to define where the end of the stack appeared, for use in interpreting core file formats that don't record this address in the core file itself. This information is now configured in BFD, and @value{GDBN} gets the info portably from there. The values in @value{GDBN}'s configuration files should be moved into BFD configuration files (if needed there), and deleted from all of @value{GDBN}'s config files. Any @file{@var{foo}-xdep.c} file that references STACK_END_ADDR is so old that it has never been converted to use BFD. Now that's old! @end table @include observer.texi @raisesections @include fdl.texi @lowersections @node Index @unnumbered Index @printindex cp @bye