0743fc83c0
Currently there are many prefix commands that do nothing but call either help_list or cmd_show_list. I happened to notice that one such call, for "set print type", used the wrong command list parameter, causing incorrect output. Rather than fix this bug in isolation, I decided to eliminate this possibility by adding two new ways to add prefix commands, which simply route the call to help_list or cmd_show_list, as appropriate. This makes it impossible for a mismatch to occur. In some cases, a bit of output was removed; however, I don't think this output in general was very useful. It seemed redundant with what's already printed by help_list. A representative example is this hunk, removed from ada-lang.c: - printf_unfiltered (_(\ -"\"set ada\" must be followed by the name of a setting.\n")); This simplified the CLI style set/show commands quite a bit, and allowed the deletion of a macro. This also cleans up some unusual code in windows-tdep.c. Tested on x86-64 Fedora 30. Note that I have no way to build the go32-nat.c change. gdb/ChangeLog 2020-04-17 Tom Tromey <tromey@adacore.com> * auto-load.c (show_auto_load_cmd): Remove. (auto_load_show_cmdlist_get): Use add_show_prefix_cmd. * arc-tdep.c (_initialize_arc_tdep): Use add_show_prefix_cmd. (maintenance_print_arc_command): Remove. * tui/tui-win.c (tui_command): Remove. (tui_get_cmd_list): Use add_basic_prefix_cmd. * tui/tui-layout.c (tui_layout_command): Remove. (_initialize_tui_layout): Use add_basic_prefix_cmd. * python/python.c (user_set_python, user_show_python): Remove. (_initialize_python): Use add_basic_prefix_cmd, add_show_prefix_cmd. * guile/guile.c (set_guile_command, show_guile_command): Remove. (install_gdb_commands): Use add_basic_prefix_cmd, add_show_prefix_cmd. (info_guile_command): Remove. * dwarf2/read.c (set_dwarf_cmd, show_dwarf_cmd): Remove. (_initialize_dwarf2_read): Use add_basic_prefix_cmd, add_show_prefix_cmd. * cli/cli-style.h (class cli_style_option) <add_setshow_commands>: Remove do_set and do_show parameters. * cli/cli-style.c (set_style, show_style): Remove. (_initialize_cli_style): Use add_basic_prefix_cmd, add_show_prefix_cmd. (cli_style_option::add_setshow_commands): Remove do_set and do_show parameters. (cli_style_option::add_setshow_commands): Use add_basic_prefix_cmd, add_show_prefix_cmd. (STYLE_ADD_SETSHOW_COMMANDS): Remove macro. (set_style_name): Remove. * cli/cli-dump.c (dump_command, append_command): Remove. (srec_dump_command, ihex_dump_command, verilog_dump_command) (tekhex_dump_command, binary_dump_command) (binary_append_command): Remove. (_initialize_cli_dump): Use add_basic_prefix_cmd. * windows-tdep.c (w32_prefix_command_valid): Remove global. (init_w32_command_list): Remove; move into ... (_initialize_windows_tdep): ... here. Use add_basic_prefix_cmd. * valprint.c (set_print, show_print, set_print_raw) (show_print_raw): Remove. (_initialize_valprint): Use add_basic_prefix_cmd, add_show_prefix_cmd. * typeprint.c (set_print_type, show_print_type): Remove. (_initialize_typeprint): Use add_basic_prefix_cmd, add_show_prefix_cmd. * record.c (set_record_command, show_record_command): Remove. (_initialize_record): Use add_basic_prefix_cmd, add_show_prefix_cmd. * cli/cli-cmds.c (_initialize_cli_cmds): Use add_basic_prefix_cmd, add_show_prefix_cmd. (info_command, show_command, set_debug, show_debug): Remove. * top.h (set_history, show_history): Don't declare. * top.c (set_history, show_history): Remove. * target-descriptions.c (set_tdesc_cmd, show_tdesc_cmd) (unset_tdesc_cmd): Remove. (_initialize_target_descriptions): Use add_basic_prefix_cmd, add_show_prefix_cmd. * symtab.c (info_module_command): Remove. (_initialize_symtab): Use add_basic_prefix_cmd. * symfile.c (overlay_command): Remove. (_initialize_symfile): Use add_basic_prefix_cmd. * sparc64-tdep.c (info_adi_command): Remove. (_initialize_sparc64_adi_tdep): Use add_basic_prefix_cmd. * sh-tdep.c (show_sh_command, set_sh_command): Remove. (_initialize_sh_tdep): Use add_basic_prefix_cmd, add_show_prefix_cmd. * serial.c (serial_set_cmd, serial_show_cmd): Remove. (_initialize_serial): Use add_basic_prefix_cmd, add_show_prefix_cmd. * ser-tcp.c (set_tcp_cmd, show_tcp_cmd): Remove. (_initialize_ser_tcp): Use add_basic_prefix_cmd, add_show_prefix_cmd. * rs6000-tdep.c (set_powerpc_command, show_powerpc_command) (_initialize_rs6000_tdep): Use add_basic_prefix_cmd, add_show_prefix_cmd. * riscv-tdep.c (show_riscv_command, set_riscv_command) (show_debug_riscv_command, set_debug_riscv_command): Remove. (_initialize_riscv_tdep): Use add_basic_prefix_cmd, add_show_prefix_cmd. * remote.c (remote_command, set_remote_cmd): Remove. (_initialize_remote): Use add_basic_prefix_cmd. * record-full.c (set_record_full_command) (show_record_full_command): Remove. (_initialize_record_full): Use add_basic_prefix_cmd, add_show_prefix_cmd. * record-btrace.c (cmd_set_record_btrace) (cmd_show_record_btrace, cmd_set_record_btrace_bts) (cmd_show_record_btrace_bts, cmd_set_record_btrace_pt) (cmd_show_record_btrace_pt): Remove. (_initialize_record_btrace): Use add_basic_prefix_cmd, add_show_prefix_cmd. * ravenscar-thread.c (set_ravenscar_command) (show_ravenscar_command): Remove. (_initialize_ravenscar): Use add_basic_prefix_cmd, add_show_prefix_cmd. * mips-tdep.c (show_mips_command, set_mips_command) (_initialize_mips_tdep): Use add_basic_prefix_cmd, add_show_prefix_cmd. * maint.c (maintenance_command, maintenance_info_command) (maintenance_check_command, maintenance_print_command) (maintenance_set_cmd, maintenance_show_cmd): Remove. (_initialize_maint_cmds): Use add_basic_prefix_cmd, add_show_prefix_cmd. (show_per_command_cmd): Remove. * maint-test-settings.c (maintenance_set_test_settings_cmd): Remove. (maintenance_show_test_settings_cmd): Remove. (_initialize_maint_test_settings): Use add_basic_prefix_cmd, add_show_prefix_cmd. * maint-test-options.c (maintenance_test_options_command): Remove. (_initialize_maint_test_options): Use add_basic_prefix_cmd. * macrocmd.c (macro_command): Remove (_initialize_macrocmd): Use add_basic_prefix_cmd. * language.c (set_check, show_check): Remove. (_initialize_language): Use add_basic_prefix_cmd, add_show_prefix_cmd. * infcmd.c (unset_command): Remove. (_initialize_infcmd): Use add_basic_prefix_cmd. * i386-tdep.c (set_mpx_cmd, show_mpx_cmd): Remove. (_initialize_i386_tdep): Use add_basic_prefix_cmd, add_show_prefix_cmd. * go32-nat.c (go32_info_dos_command): Remove. (_initialize_go32_nat): Use add_basic_prefix_cmd. * cli/cli-decode.c (do_prefix_cmd, add_basic_prefix_cmd) (do_show_prefix_cmd, add_show_prefix_cmd): New functions. * frame.c (set_backtrace_cmd, show_backtrace_cmd): Remove. (_initialize_frame): Use add_basic_prefix_cmd, add_show_prefix_cmd. * dcache.c (set_dcache_command, show_dcache_command): Remove. (_initialize_dcache): Use add_basic_prefix_cmd, add_show_prefix_cmd. * cp-support.c (maint_cplus_command): Remove. (_initialize_cp_support): Use add_basic_prefix_cmd. * btrace.c (maint_btrace_cmd, maint_btrace_set_cmd) (maint_btrace_show_cmd, maint_btrace_pt_set_cmd) (maint_btrace_pt_show_cmd, _initialize_btrace): Use add_basic_prefix_cmd, add_show_prefix_cmd. * breakpoint.c (save_command): Remove. (_initialize_breakpoint): Use add_basic_prefix_cmd. * arm-tdep.c (set_arm_command, show_arm_command): Remove. (_initialize_arm_tdep): Use add_basic_prefix_cmd, add_show_prefix_cmd. * ada-lang.c (maint_set_ada_cmd, maint_show_ada_cmd) (set_ada_command, show_ada_command): Remove. (_initialize_ada_language): Use add_basic_prefix_cmd, add_show_prefix_cmd. * command.h (add_basic_prefix_cmd, add_show_prefix_cmd): Declare. gdb/testsuite/ChangeLog 2020-04-17 Tom Tromey <tromey@adacore.com> * gdb.cp/maint.exp (test_help): Simplify multiple_help_body. Update tests. * gdb.btrace/cpu.exp: Update tests. * gdb.base/maint.exp: Update tests. * gdb.base/default.exp: Update tests. * gdb.base/completion.exp: Update tests.
README for GNU development tools This directory contains various GNU compilers, assemblers, linkers, debuggers, etc., plus their support routines, definitions, and documentation. If you are receiving this as part of a GDB release, see the file gdb/README. If with a binutils release, see binutils/README; if with a libg++ release, see libg++/README, etc. That'll give you info about this package -- supported targets, how to use it, how to report bugs, etc. It is now possible to automatically configure and build a variety of tools with one command. To build all of the tools contained herein, run the ``configure'' script here, e.g.: ./configure make To install them (by default in /usr/local/bin, /usr/local/lib, etc), then do: make install (If the configure script can't determine your type of computer, give it the name as an argument, for instance ``./configure sun4''. You can use the script ``config.sub'' to test whether a name is recognized; if it is, config.sub translates it to a triplet specifying CPU, vendor, and OS.) If you have more than one compiler on your system, it is often best to explicitly set CC in the environment before running configure, and to also set CC when running make. For example (assuming sh/bash/ksh): CC=gcc ./configure make A similar example using csh: setenv CC gcc ./configure make Much of the code and documentation enclosed is copyright by the Free Software Foundation, Inc. See the file COPYING or COPYING.LIB in the various directories, for a description of the GNU General Public License terms under which you can copy the files. REPORTING BUGS: Again, see gdb/README, binutils/README, etc., for info on where and how to report problems.