b11fb93989
* acconfig.h, aclocal.m4: New files. * configure.in: Rewritten (except for some target-specific code) for autoconf. * conf.in, configure: New files, generated from the above. * Makefile.in: Changed magic sequence indicating insertion of makefile fragments. (VPATH, srcdir, CC, LIBS, OBJS dependencies): Use @-substitutions from configure. (LINKED_HEADERS): Deleted a.out.gnu.h, a.out.h, and host.h. (config.status, configure): Rewrite rules. (config-stamp): Depend on conf. Skip variables that configure is now substituting itself. (*.o dependencies): Deleted host.h. (distclean, realclean): Don't delete host.h. * as.c: Don't include stdio.h, string.h, sys/types.h. Include signal.h after as.h. * as.h: Include alloca-conf.h first. Include ctype.h, string.h, strings.h, stdlib.h, unistd.h, sys/types.h, fopen-bin.h, fopen-same.h, as suggested by autoconf test results. [BROKEN_ASSERT]: Don't include assert.h. (strdup): Declare. (volatile, const): Define if not __STDC__ and not already defined. (malloc, realloc) [NEED_MALLOC_DECLARATION]: Declare. (free) [NEED_FREE_DECLARATION]: Declare. * gasp.c: Include config.h, stdlib.h (if HAVE_STDLIB_H). Don't include host.h. (malloc) [NEED_MALLOC_DECLARATION]: Declare. * messages.c: Include as.h first. Include errno.h only if HAVE_ERRNO_H. If HAVE_VARARGS_H and not __STDC__, undefine HAVE_STDARG_H. Set NO_STDARG and NO_VARARGS as appropriate. * doc/Makefile.in (srcdir, INSTALL, INSTALL_PROGRAM, INSTALL_DATA): Use autoconf @-substitutions.
378 lines
10 KiB
Plaintext
378 lines
10 KiB
Plaintext
dnl Process this file with autoconf to produce a configure script.
|
|
dnl
|
|
dnl And be careful when changing it! If you must add tests with square
|
|
dnl brackets, be sure changequote invocations surround it.
|
|
dnl
|
|
dnl Remember to use "dnl" in each line before the AC_INIT call...
|
|
dnl
|
|
dnl
|
|
AC_INIT(as.h)
|
|
dnl
|
|
AC_ARG_ENABLE(bfd-assembler,
|
|
[ bfd-assembler use BFD back end for writing object files],
|
|
[case "${enableval}" in
|
|
yes) need_bfd=yes bfd_gas=yes ;;
|
|
no) ;;
|
|
*) AC_MSG_ERROR(bad value ${enableval} given for bfd-assembler option) ;;
|
|
esac])dnl
|
|
|
|
# Generate a header file -- gets more post-processing by Makefile later.
|
|
AC_CONFIG_HEADER(conf)
|
|
|
|
dnl For recursion to work right, this must be an absolute pathname.
|
|
AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/..)
|
|
AC_CANONICAL_SYSTEM
|
|
|
|
emulation=generic
|
|
|
|
# assign cpu type
|
|
|
|
# check for architecture variants
|
|
case ${target_cpu} in
|
|
hppa*) cpu_type=hppa ;;
|
|
changequote(,)dnl
|
|
i[45]86) cpu_type=i386 ;;
|
|
m680[012346]0) cpu_type=m68k ;;
|
|
m68008) cpu_type=m68k ;;
|
|
m683??) cpu_type=m68k ;;
|
|
changequote([,])dnl
|
|
m8*) cpu_type=m88k ;;
|
|
mips*el) cpu_type=mips endian=little;;
|
|
mips*) cpu_type=mips endian=big ;;
|
|
powerpc*) cpu_type=ppc ;;
|
|
rs6000*) cpu_type=ppc ;;
|
|
sparc64) cpu_type=sparc obj_format=elf AC_DEFINE(sparcv9) ;;
|
|
sparclite*) cpu_type=sparc ;;
|
|
*) cpu_type=${target_cpu} ;;
|
|
esac
|
|
|
|
# do we need the opcodes library?
|
|
case ${cpu_type} in
|
|
alpha | vax)
|
|
;;
|
|
*)
|
|
OPCODES_LIB="../opcodes/libopcodes.a"
|
|
;;
|
|
esac
|
|
AC_SUBST(OPCODES_LIB)
|
|
|
|
gas_target=${cpu_type}
|
|
generic_target=${cpu_type}-${target_vendor}-${target_os}
|
|
dev=no
|
|
|
|
# assign object format
|
|
case ${generic_target} in
|
|
a29k-amd-udi) obj_format=coff gas_target=ebmon29k ;;
|
|
a29k-amd-ebmon) obj_format=coff gas_target=ebmon29k ;;
|
|
|
|
alpha-*-netware*) obj_format=ecoff ;;
|
|
alpha-*-osf*) obj_format=ecoff ;;
|
|
|
|
hppa-*-*elf*) obj_format=elf emulation=hppa ;;
|
|
hppa-*-osf*) obj_format=som emulation=hppa ;;
|
|
hppa-*-hpux*) obj_format=som emulation=hppa ;;
|
|
hppa-*-bsd*) obj_format=som emulation=hppa ;;
|
|
hppa-*-hiux*) obj_format=som emulation=hppa ;;
|
|
|
|
h8300-*-coff) obj_format=coff ;;
|
|
|
|
i386-ibm-aix*) obj_format=coff gas_target=i386coff
|
|
emulation=i386aix ;;
|
|
i386-*-bsd*) obj_format=aout emulation=386bsd ;;
|
|
i386-*-netbsd0.8) obj_format=aout emulation=386bsd ;;
|
|
i386-*-netbsd*) obj_format=aout emulation=netbsd ;;
|
|
i386-*-linux*elf*) obj_format=elf emulation=linux ;;
|
|
i386-*-linux*coff*) obj_format=coff emulation=linux
|
|
gas_target=i386coff ;;
|
|
i386-*-linux*) obj_format=aout emulation=linux ;;
|
|
i386-*-lynxos*) obj_format=coff gas_target=i386coff
|
|
emulation=lynx ;;
|
|
i386-*-sysv4* | i386-*-solaris* | i386-*-elf)
|
|
obj_format=elf ;;
|
|
i386-*-coff | i386-*-sysv* | i386-*-sco* | i386-*-isc*)
|
|
obj_format=coff gas_target=i386coff ;;
|
|
i386-*-vsta) obj_format=aout ;;
|
|
i386-*-go32) obj_format=coff gas_target=i386coff ;;
|
|
i386-*-mach* | i386-*-gnu*)
|
|
obj_format=aout emulation=mach bfd_gas=yes ;;
|
|
|
|
i960-*-bout) obj_format=bout ;;
|
|
i960-*-coff) obj_format=coff emulation=ic960 gas_target=ic960coff ;;
|
|
i960-*-nindy*) obj_format=bout ;;
|
|
i960-*-vxworks4*) obj_format=bout ;;
|
|
i960-*-vxworks5.0) obj_format=bout ;;
|
|
i960-*-vxworks5.*) obj_format=coff emulation=ic960 gas_target=ic960coff ;;
|
|
i960-*-vxworks*) obj_format=bout ;;
|
|
|
|
m68k-wrs-vxworks | m68k-ericsson-ose | m68k-*-sunos*)
|
|
obj_format=aout emulation=sun3 ;;
|
|
m68k-motorola-sysv) obj_format=coff gas_target=m68kcoff emulation=delta ;;
|
|
m68k-bull-sysv3*) obj_format=coff gas_target=m68kcoff emulation=dpx2 ;;
|
|
m68k-apollo-*) obj_format=coff gas_target=apollo emulation=apollo ;;
|
|
m68k-*-coff | m68k-*-sysv*)
|
|
obj_format=coff gas_target=m68kcoff ;;
|
|
m68k-*-hpux) obj_format=hp300 emulation=hp300 ;;
|
|
m68k-*-lynxos*) obj_format=coff gas_target=m68kcoff
|
|
emulation=lynx ;;
|
|
|
|
m88k-*-coff*) obj_format=coff gas_target=m88kcoff ;;
|
|
|
|
# don't change emulation like *-*-bsd does
|
|
mips-*-bsd*) bfd_gas=yes obj_format=aout gas_target=mips-lit ;;
|
|
mips-*-ultrix*) obj_format=ecoff gas_target=mips-lit ;;
|
|
mips-*-ecoff*) obj_format=ecoff
|
|
case "$endian" in
|
|
big) gas_target=mips-big ;;
|
|
*) gas_target=mips-lit ;;
|
|
esac
|
|
;;
|
|
mips-*-ecoff*) obj_format=ecoff gas_target=mips-big ;;
|
|
mips-*-irix5*) obj_format=elf gas_target=mips-big ;;
|
|
mips-*-irix*) obj_format=ecoff gas_target=mips-big ;;
|
|
mips-*-riscos*) obj_format=ecoff gas_target=mips-big ;;
|
|
mips-*-sysv*) obj_format=ecoff gas_target=mips-big ;;
|
|
mips-*-elf*) obj_format=elf
|
|
case "$endian" in
|
|
big) gas_target=mips-big ;;
|
|
*) gas_target=mips-lit ;;
|
|
esac
|
|
;;
|
|
ppc-*-aix*) obj_format=coff bfd_gas=yes ;;
|
|
ppc-*-elf*) obj_format=elf bfd_gas=yes ;;
|
|
ppc-*-netware*) obj_format=elf emulation=ppcnw ;;
|
|
ppc-*-sysv4*) obj_format=elf bfd_gas=yes ;;
|
|
|
|
sh-*-coff) obj_format=coff ;;
|
|
|
|
ns32k-pc532-mach*) obj_format=aout emulation=pc532 bfd_gas=yes ;;
|
|
ns32k-pc532-netbsd*) obj_format=aout emulation=netbsd532 bfd_gas=yes ;;
|
|
|
|
sparc*-*-sunos4*) obj_format=aout emulation=sun3 bfd_gas=yes ;;
|
|
sparc*-*-aout | sparc*-*-vxworks)
|
|
obj_format=aout bfd_gas=yes ;;
|
|
sparc*-*-coff) obj_format=coff bfd_gas=yes ;;
|
|
sparc*-*-lynxos*) obj_format=coff bfd_gas=yes emulation=lynx ;;
|
|
sparc*-fujitsu-none) obj_format=aout bfd_gas=yes ;;
|
|
sparc*-*-elf | sparc*-*-solaris*)
|
|
obj_format=elf ;;
|
|
|
|
vax-*-bsd* | vax-*-ultrix*)
|
|
obj_format=aout ;;
|
|
vax-*-vms) obj_format=vms ;;
|
|
|
|
z8k-*-coff | z8k-*-sim)
|
|
obj_format=coff ;;
|
|
|
|
*-*-aout | *-*-scout)
|
|
obj_format=aout ;;
|
|
*-*-nindy*)
|
|
obj_format=bout ;;
|
|
*-*-bsd*)
|
|
obj_format=aout emulation=sun3 ;;
|
|
*-*-generic) obj_format=generic ;;
|
|
*-*-xray | *-*-hms) obj_format=coff ;;
|
|
*-*-sim) obj_format=coff ;;
|
|
*-*-elf | *-*-sysv4* | *-*-solaris*)
|
|
AC_MSG_WARN(GAS support for ELF format is incomplete)
|
|
obj_format=elf dev=yes ;;
|
|
*-*-vxworks) obj_format=aout ;;
|
|
*-*-netware) obj_format=elf ;;
|
|
esac
|
|
|
|
# Assign floating point type. Most processors with FP support
|
|
# IEEE FP. On those that don't support FP at all, usually IEEE
|
|
# is emulated.
|
|
case ${target_cpu} in
|
|
vax | tahoe ) atof=${target_cpu} ;;
|
|
*) atof=ieee ;;
|
|
esac
|
|
|
|
case "${obj_format}" in
|
|
"") AC_MSG_ERROR(GAS does not know what format to use for target ${target}) ;;
|
|
esac
|
|
|
|
dnl
|
|
dnl Make sure the desired support files exist.
|
|
dnl
|
|
|
|
changequote(<<<,>>>)dnl
|
|
|
|
if [ ! -r ${srcdir}/config/tc-${cpu_type}.c ]; then
|
|
AC_MSG_ERROR(GAS does not support target CPU ${cpu_type})
|
|
fi
|
|
|
|
if [ ! -r ${srcdir}/config/obj-${obj_format}.c ]; then
|
|
AC_MSG_ERROR(GAS does not have support for object file format ${obj_format})
|
|
fi
|
|
|
|
changequote([,])dnl
|
|
|
|
# and target makefile frag
|
|
|
|
target_frag=${srcdir}/config/${gas_target}.mt
|
|
AC_SUBST_FILE(target_frag)
|
|
|
|
case ${bfd_gas}-${obj_format} in
|
|
yes-coff) need_bfd=yes ;;
|
|
no-coff) need_bfd=yes
|
|
AC_DEFINE(MANY_SEGMENTS) ;;
|
|
*-elf) bfd_gas=yes ;;
|
|
*-ecoff) bfd_gas=yes ;;
|
|
*-som) bfd_gas=yes ;;
|
|
*) ;;
|
|
esac
|
|
|
|
case ${with_bfd_assembler}-${bfd_gas} in
|
|
yes-yes | no-no)
|
|
# We didn't override user's choice.
|
|
;;
|
|
no-yes)
|
|
AC_MSG_WARN(Use of BFD is required for ${target}; overriding config options.)
|
|
;;
|
|
no-preferred)
|
|
bfd_gas=no
|
|
;;
|
|
*-preferred)
|
|
bfd_gas=yes
|
|
;;
|
|
-*)
|
|
# User specified nothing.
|
|
;;
|
|
esac
|
|
|
|
reject_dev_configs=yes
|
|
|
|
case ${reject_dev_configs}-${dev} in
|
|
yes-yes) # Oops.
|
|
AC_MSG_ERROR(GAS does not support the ${generic_target} configuration.)
|
|
;;
|
|
esac
|
|
|
|
dnl Looks like the AC_MAKE_LINKS string is taken literally and put into the
|
|
dnl config.status file. So the necessary variables also have to be
|
|
dnl exported.
|
|
AC_SUBST(cpu_type) AC_SUBST(obj_format) AC_SUBST(emulation) AC_SUBST(atof)
|
|
AC_LINK_FILES(targ-cpu.c targ-cpu.h obj-format.h obj-format.c targ-env.h atof-targ.c,
|
|
config/tc-${cpu_type}.c config/tc-${cpu_type}.h \
|
|
config/obj-${obj_format}.h config/obj-${obj_format}.c \
|
|
config/te-${emulation}.h config/atof-${atof}.c)
|
|
|
|
case "${bfd_gas}" in
|
|
yes) AC_DEFINE(BFD_ASSEMBLER)
|
|
need_bfd=yes ;;
|
|
esac
|
|
|
|
case "${need_bfd}" in
|
|
yes) BFDLIB=../bfd/libbfd.a
|
|
ALL_OBJ_DEPS="$ALL_OBJ_DEPS ../bfd/bfd.h"
|
|
;;
|
|
esac
|
|
AC_SUBST(BFDLIB)
|
|
AC_SUBST(ALL_OBJ_DEPS)
|
|
|
|
case "x${host_canon}" in
|
|
x${target_canon}) ;;
|
|
*) AC_DEFINE(CROSS_COMPILE);;
|
|
esac
|
|
|
|
AC_DEFINE_UNQUOTED(TARGET_ALIAS, "${target_alias}")
|
|
AC_DEFINE_UNQUOTED(TARGET_CANONICAL, "${target}")
|
|
AC_DEFINE_UNQUOTED(TARGET_CPU, "${target_cpu}")
|
|
AC_DEFINE_UNQUOTED(TARGET_VENDOR, "${target_vendor}")
|
|
AC_DEFINE_UNQUOTED(TARGET_OS, "${target_os}")
|
|
|
|
case ${host} in
|
|
rs6000-*-*)
|
|
# The IBM compiler mis-compiles some expressions used in gas.
|
|
# This will tell gas to work around this lossage.
|
|
AC_DEFINE(IBM_COMPILER_SUX) ;;
|
|
i386-*-go32)
|
|
# Using fopen(..., "w") for a binary file breaks under DOS.
|
|
AC_DEFINE(WANT_FOPEN_BIN) ;;
|
|
esac
|
|
|
|
AC_PROG_CC
|
|
AC_PROG_INSTALL
|
|
|
|
AC_HEADER_STDC
|
|
AC_CHECK_HEADERS(string.h stdlib.h memory.h strings.h unistd.h stdarg.h varargs.h errno.h sys/types.h)
|
|
|
|
dnl ansidecl.h will deal with const
|
|
dnl AC_CONST
|
|
AC_FUNC_ALLOCA
|
|
AC_C_INLINE
|
|
|
|
# Some non-ANSI preprocessors botch requoting inside strings. That's bad
|
|
# enough, but on some of those systems, the assert macro relies on requoting
|
|
# working properly!
|
|
AC_CHECKING([for working assert macro])
|
|
AC_TRY_LINK([#include <assert.h>
|
|
#include <stdio.h>], [
|
|
/* check for requoting problems */
|
|
static int a, b, c, d;
|
|
static char *s;
|
|
assert (!strcmp(s, "foo bar baz quux"));
|
|
/* check for newline handling */
|
|
assert (a == b
|
|
|| c == d);
|
|
], , AC_DEFINE(BROKEN_ASSERT))
|
|
|
|
# On some systems, the system header files may not declare malloc, realloc,
|
|
# and free. There are places where gas needs these functions to have been
|
|
# declared -- such as when taking their addresses.
|
|
AC_CHECKING([whether malloc declaration is required])
|
|
AC_TRY_LINK([
|
|
#ifdef HAVE_MEMORY_H
|
|
#include <memory.h>
|
|
#endif
|
|
#ifdef HAVE_STRING_H
|
|
#include <string.h>
|
|
#endif
|
|
#ifdef HAVE_STDLIB_H
|
|
#include <stdlib.h>
|
|
#endif
|
|
#ifdef HAVE_UNISTD_H
|
|
#include <unistd.h>
|
|
#endif
|
|
], [
|
|
char *(*f) ();
|
|
f = (char *(*)()) malloc;
|
|
], , AC_DEFINE(NEED_MALLOC_DECLARATION))
|
|
AC_CHECKING([free declaration required])
|
|
AC_TRY_LINK([
|
|
#ifdef HAVE_MEMORY_H
|
|
#include <memory.h>
|
|
#endif
|
|
#ifdef HAVE_STRING_H
|
|
#include <string.h>
|
|
#endif
|
|
#ifdef HAVE_STDLIB_H
|
|
#include <stdlib.h>
|
|
#endif
|
|
#ifdef HAVE_UNISTD_H
|
|
#include <unistd.h>
|
|
#endif
|
|
], [
|
|
int (*f) ();
|
|
f = (int (*)()) free;
|
|
], , AC_DEFINE(NEED_FREE_DECLARATION))
|
|
|
|
# Does errno.h declare errno, or do we have to add a separate declaration
|
|
# for it?
|
|
AC_CHECKING([errno declaration required])
|
|
AC_TRY_LINK([
|
|
#ifdef HAVE_ERRNO_H
|
|
#include <errno.h>
|
|
#endif
|
|
], [
|
|
int x;
|
|
x = errno;
|
|
], , AC_DEFINE(NEED_ERRNO_DECLARATION))
|
|
|
|
AC_CONFIG_SUBDIRS(testsuite)
|
|
|
|
dnl This must come last.
|
|
dnl Apparently symlinks are checked for in the directory containing
|
|
dnl the last Makefile. Thus the order used here...
|
|
AC_OUTPUT(doc/Makefile Makefile)
|