OpenE2K
/
binutils-gdb
12
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
binutils-gdb/sim/ppc/configure

2004 lines
61 KiB
Bash
Executable File
Raw Blame History

#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
# Generated automatically using autoconf version 2.7
# Copyright (C) 1992, 1993, 1994 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
# Defaults:
ac_help=
ac_default_prefix=/usr/local
# Any additions from configure.in:
ac_help="$ac_help
--enable-sim-cflags=opts Extra CFLAGS for use in building simulator"
ac_help="$ac_help
--enable-sim-warnings=opts Extra CFLAGS for turning on compiler warnings except for idecode.o, semantics.o and psim.o"
ac_help="$ac_help
--enable-sim-config=file Override default config file"
ac_help="$ac_help
--enable-sim-opcode=which Override default opcode lookup."
ac_help="$ac_help
--enable-sim-switch Use a switch instead of a table for instruction call."
ac_help="$ac_help
--enable-sim-duplicate Expand (duplicate) semantic functions."
ac_help="$ac_help
--enable-sim-filter=rule Specify filter rules."
ac_help="$ac_help
--enable-sim-icache=size Specify instruction cache size."
ac_help="$ac_help
--enable-sim-inline=inlines Specify which functions should be inlined."
ac_help="$ac_help
--enable-sim-bswap Use the BSWAP instruction on Intel 486s and Pentiums."
ac_help="$ac_help
--enable-sim-endian=endian Specify target byte endian orientation."
ac_help="$ac_help
--enable-sim-hostendain=end Specify host byte endian orientation."
ac_help="$ac_help
--enable-sim-smp=n Specify number of processors to configure for."
ac_help="$ac_help
--enable-sim-xor-endian=n Specify number bytes involved in PowerPC XOR bi-endian mode (default 8)."
ac_help="$ac_help
--enable-sim-bitsize=n Specify target bitsize (32 or 64)."
ac_help="$ac_help
--enable-sim-hostbitsize=32|64 Specify host bitsize (32 or 64)."
ac_help="$ac_help
--enable-sim-env=env Specify target environment (operating, virtual, user)."
ac_help="$ac_help
--enable-sim-timebase Specify whether the PPC timebase is supported."
ac_help="$ac_help
--enable-sim-alignment=align Specify strict or nonstrict alignment."
ac_help="$ac_help
--enable-sim-trace Specify whether tracing is supported."
ac_help="$ac_help
--enable-sim-assert Specify whether to perform random assertions."
ac_help="$ac_help
--enable-sim-reserved-bits Specify whether to check reserved bits in instruction."
ac_help="$ac_help
--enable-sim-float Specify whether to use host floating point or simulate."
ac_help="$ac_help
--enable-sim-monitor=mon Specify whether to enable monitoring events."
ac_help="$ac_help
--enable-sim-model=which Specify PowerPC to model."
ac_help="$ac_help
--enable-sim-default-model=which Specify default PowerPC to model."
ac_help="$ac_help
--enable-sim-model-issue Specify whether to simulate model specific actions"
# Initialize some variables set by options.
# The variables have the same names as the options, with
# dashes changed to underlines.
build=NONE
cache_file=./config.cache
exec_prefix=NONE
host=NONE
no_create=
nonopt=NONE
no_recursion=
prefix=NONE
program_prefix=NONE
program_suffix=NONE
program_transform_name=s,x,x,
silent=
site=
srcdir=
target=NONE
verbose=
x_includes=NONE
x_libraries=NONE
bindir='${exec_prefix}/bin'
sbindir='${exec_prefix}/sbin'
libexecdir='${exec_prefix}/libexec'
datadir='${prefix}/share'
sysconfdir='${prefix}/etc'
sharedstatedir='${prefix}/com'
localstatedir='${prefix}/var'
libdir='${exec_prefix}/lib'
includedir='${prefix}/include'
oldincludedir='/usr/include'
infodir='${prefix}/info'
mandir='${prefix}/man'
# Initialize some other variables.
subdirs=
MFLAGS= MAKEFLAGS=
ac_prev=
for ac_option
do
# If the previous option needs an argument, assign it.
if test -n "$ac_prev"; then
eval "$ac_prev=\$ac_option"
ac_prev=
continue
fi
case "$ac_option" in
-*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
*) ac_optarg= ;;
esac
# Accept the important Cygnus configure options, so we can diagnose typos.
case "$ac_option" in
-bindir | --bindir | --bindi | --bind | --bin | --bi)
ac_prev=bindir ;;
-bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
bindir="$ac_optarg" ;;
-build | --build | --buil | --bui | --bu)
ac_prev=build ;;
-build=* | --build=* | --buil=* | --bui=* | --bu=*)
build="$ac_optarg" ;;
-cache-file | --cache-file | --cache-fil | --cache-fi \
| --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
ac_prev=cache_file ;;
-cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
| --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
cache_file="$ac_optarg" ;;
-datadir | --datadir | --datadi | --datad | --data | --dat | --da)
ac_prev=datadir ;;
-datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
| --da=*)
datadir="$ac_optarg" ;;
-disable-* | --disable-*)
ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
# Reject names that are not valid shell variable names.
if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
{ echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
fi
ac_feature=`echo $ac_feature| sed 's/-/_/g'`
eval "enable_${ac_feature}=no" ;;
-enable-* | --enable-*)
ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
# Reject names that are not valid shell variable names.
if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
{ echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
fi
ac_feature=`echo $ac_feature| sed 's/-/_/g'`
case "$ac_option" in
*=*) ;;
*) ac_optarg=yes ;;
esac
eval "enable_${ac_feature}='$ac_optarg'" ;;
-exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
| --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
| --exec | --exe | --ex)
ac_prev=exec_prefix ;;
-exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
| --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
| --exec=* | --exe=* | --ex=*)
exec_prefix="$ac_optarg" ;;
-gas | --gas | --ga | --g)
# Obsolete; use --with-gas.
with_gas=yes ;;
-help | --help | --hel | --he)
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat << EOF
Usage: configure [options] [host]
Options: [defaults in brackets after descriptions]
Configuration:
--cache-file=FILE cache test results in FILE
--help print this message
--no-create do not create output files
--quiet, --silent do not print \`checking...' messages
--version print the version of autoconf that created configure
Directory and file names:
--prefix=PREFIX install architecture-independent files in PREFIX
[$ac_default_prefix]
--exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
[same as prefix]
--bindir=DIR user executables in DIR [EPREFIX/bin]
--sbindir=DIR system admin executables in DIR [EPREFIX/sbin]
--libexecdir=DIR program executables in DIR [EPREFIX/libexec]
--datadir=DIR read-only architecture-independent data in DIR
[PREFIX/share]
--sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc]
--sharedstatedir=DIR modifiable architecture-independent data in DIR
[PREFIX/com]
--localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var]
--libdir=DIR object code libraries in DIR [EPREFIX/lib]
--includedir=DIR C header files in DIR [PREFIX/include]
--oldincludedir=DIR C header files for non-gcc in DIR [/usr/include]
--infodir=DIR info documentation in DIR [PREFIX/info]
--mandir=DIR man documentation in DIR [PREFIX/man]
--srcdir=DIR find the sources in DIR [configure dir or ..]
--program-prefix=PREFIX prepend PREFIX to installed program names
--program-suffix=SUFFIX append SUFFIX to installed program names
--program-transform-name=PROGRAM
run sed PROGRAM on installed program names
EOF
cat << EOF
Host type:
--build=BUILD configure for building on BUILD [BUILD=HOST]
--host=HOST configure for HOST [guessed]
--target=TARGET configure for TARGET [TARGET=HOST]
Features and packages:
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--x-includes=DIR X include files are in DIR
--x-libraries=DIR X library files are in DIR
EOF
if test -n "$ac_help"; then
echo "--enable and --with options recognized:$ac_help"
fi
exit 0 ;;
-host | --host | --hos | --ho)
ac_prev=host ;;
-host=* | --host=* | --hos=* | --ho=*)
host="$ac_optarg" ;;
-includedir | --includedir | --includedi | --included | --include \
| --includ | --inclu | --incl | --inc)
ac_prev=includedir ;;
-includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
| --includ=* | --inclu=* | --incl=* | --inc=*)
includedir="$ac_optarg" ;;
-infodir | --infodir | --infodi | --infod | --info | --inf)
ac_prev=infodir ;;
-infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
infodir="$ac_optarg" ;;
-libdir | --libdir | --libdi | --libd)
ac_prev=libdir ;;
-libdir=* | --libdir=* | --libdi=* | --libd=*)
libdir="$ac_optarg" ;;
-libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
| --libexe | --libex | --libe)
ac_prev=libexecdir ;;
-libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
| --libexe=* | --libex=* | --libe=*)
libexecdir="$ac_optarg" ;;
-localstatedir | --localstatedir | --localstatedi | --localstated \
| --localstate | --localstat | --localsta | --localst \
| --locals | --local | --loca | --loc | --lo)
ac_prev=localstatedir ;;
-localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
| --localstate=* | --localstat=* | --localsta=* | --localst=* \
| --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
localstatedir="$ac_optarg" ;;
-mandir | --mandir | --mandi | --mand | --man | --ma | --m)
ac_prev=mandir ;;
-mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
mandir="$ac_optarg" ;;
-nfp | --nfp | --nf)
# Obsolete; use --without-fp.
with_fp=no ;;
-no-create | --no-create | --no-creat | --no-crea | --no-cre \
| --no-cr | --no-c)
no_create=yes ;;
-no-recursion | --no-recursion | --no-recursio | --no-recursi \
| --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
no_recursion=yes ;;
-oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
| --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
| --oldin | --oldi | --old | --ol | --o)
ac_prev=oldincludedir ;;
-oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
| --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
| --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
oldincludedir="$ac_optarg" ;;
-prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
ac_prev=prefix ;;
-prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
prefix="$ac_optarg" ;;
-program-prefix | --program-prefix | --program-prefi | --program-pref \
| --program-pre | --program-pr | --program-p)
ac_prev=program_prefix ;;
-program-prefix=* | --program-prefix=* | --program-prefi=* \
| --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
program_prefix="$ac_optarg" ;;
-program-suffix | --program-suffix | --program-suffi | --program-suff \
| --program-suf | --program-su | --program-s)
ac_prev=program_suffix ;;
-program-suffix=* | --program-suffix=* | --program-suffi=* \
| --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
program_suffix="$ac_optarg" ;;
-program-transform-name | --program-transform-name \
| --program-transform-nam | --program-transform-na \
| --program-transform-n | --program-transform- \
| --program-transform | --program-transfor \
| --program-transfo | --program-transf \
| --program-trans | --program-tran \
| --progr-tra | --program-tr | --program-t)
ac_prev=program_transform_name ;;
-program-transform-name=* | --program-transform-name=* \
| --program-transform-nam=* | --program-transform-na=* \
| --program-transform-n=* | --program-transform-=* \
| --program-transform=* | --program-transfor=* \
| --program-transfo=* | --program-transf=* \
| --program-trans=* | --program-tran=* \
| --progr-tra=* | --program-tr=* | --program-t=*)
program_transform_name="$ac_optarg" ;;
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil)
silent=yes ;;
-sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
ac_prev=sbindir ;;
-sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
| --sbi=* | --sb=*)
sbindir="$ac_optarg" ;;
-sharedstatedir | --sharedstatedir | --sharedstatedi \
| --sharedstated | --sharedstate | --sharedstat | --sharedsta \
| --sharedst | --shareds | --shared | --share | --shar \
| --sha | --sh)
ac_prev=sharedstatedir ;;
-sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
| --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
| --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
| --sha=* | --sh=*)
sharedstatedir="$ac_optarg" ;;
-site | --site | --sit)
ac_prev=site ;;
-site=* | --site=* | --sit=*)
site="$ac_optarg" ;;
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
srcdir="$ac_optarg" ;;
-sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
| --syscon | --sysco | --sysc | --sys | --sy)
ac_prev=sysconfdir ;;
-sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
| --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
sysconfdir="$ac_optarg" ;;
-target | --target | --targe | --targ | --tar | --ta | --t)
ac_prev=target ;;
-target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
target="$ac_optarg" ;;
-v | -verbose | --verbose | --verbos | --verbo | --verb)
verbose=yes ;;
-version | --version | --versio | --versi | --vers)
echo "configure generated by autoconf version 2.7"
exit 0 ;;
-with-* | --with-*)
ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
# Reject names that are not valid shell variable names.
if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
{ echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
fi
ac_package=`echo $ac_package| sed 's/-/_/g'`
case "$ac_option" in
*=*) ;;
*) ac_optarg=yes ;;
esac
eval "with_${ac_package}='$ac_optarg'" ;;
-without-* | --without-*)
ac_package=`echo $ac_option|sed -e 's/-*without-//'`
# Reject names that are not valid shell variable names.
if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
{ echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
fi
ac_package=`echo $ac_package| sed 's/-/_/g'`
eval "with_${ac_package}=no" ;;
--x)
# Obsolete; use --with-x.
with_x=yes ;;
-x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
| --x-incl | --x-inc | --x-in | --x-i)
ac_prev=x_includes ;;
-x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
| --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
x_includes="$ac_optarg" ;;
-x-libraries | --x-libraries | --x-librarie | --x-librari \
| --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
ac_prev=x_libraries ;;
-x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
| --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
x_libraries="$ac_optarg" ;;
-*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
;;
*)
if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
echo "configure: warning: $ac_option: invalid host type" 1>&2
fi
if test "x$nonopt" != xNONE; then
{ echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
fi
nonopt="$ac_option"
;;
esac
done
if test -n "$ac_prev"; then
{ echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
fi
trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
# File descriptor usage:
# 0 standard input
# 1 file creation
# 2 errors and warnings
# 3 some systems may open it to /dev/tty
# 4 used on the Kubota Titan
# 6 checking for... messages and results
# 5 compiler messages saved in config.log
if test "$silent" = yes; then
exec 6>/dev/null
else
exec 6>&1
fi
exec 5>./config.log
echo "\
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
" 1>&5
# Strip out --no-create and --no-recursion so they do not pile up.
# Also quote any args containing shell metacharacters.
ac_configure_args=
for ac_arg
do
case "$ac_arg" in
-no-create | --no-create | --no-creat | --no-crea | --no-cre \
| --no-cr | --no-c) ;;
-no-recursion | --no-recursion | --no-recursio | --no-recursi \
| --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
*" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
ac_configure_args="$ac_configure_args '$ac_arg'" ;;
*) ac_configure_args="$ac_configure_args $ac_arg" ;;
esac
done
# NLS nuisances.
# Only set LANG and LC_ALL to C if already set.
# These must not be set unconditionally because not all systems understand
# e.g. LANG=C (notably SCO).
if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
if test "${LANG+set}" = set; then LANG=C; export LANG; fi
# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -rf conftest* confdefs.h
# AIX cpp loses on an empty file, so make sure it contains at least a newline.
echo > confdefs.h
# A filename unique to this package, relative to the directory that
# configure is in, which we can look for to find out if srcdir is correct.
ac_unique_file=Makefile.in
# Find the source files, if location was not specified.
if test -z "$srcdir"; then
ac_srcdir_defaulted=yes
# Try the directory containing this script, then its parent.
ac_prog=$0
ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
srcdir=$ac_confdir
if test ! -r $srcdir/$ac_unique_file; then
srcdir=..
fi
else
ac_srcdir_defaulted=no
fi
if test ! -r $srcdir/$ac_unique_file; then
if test "$ac_srcdir_defaulted" = yes; then
{ echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
else
{ echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
fi
fi
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
# Prefer explicitly selected file to automatically selected ones.
if test -z "$CONFIG_SITE"; then
if test "x$prefix" != xNONE; then
CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
else
CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
fi
fi
for ac_site_file in $CONFIG_SITE; do
if test -r "$ac_site_file"; then
echo "loading site script $ac_site_file"
. "$ac_site_file"
fi
done
if test -r "$cache_file"; then
echo "loading cache $cache_file"
. $cache_file
else
echo "creating cache $cache_file"
> $cache_file
fi
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='echo $CPP $CPPFLAGS 1>&5;
$CPP $CPPFLAGS'
ac_compile='echo ${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5;
${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5 2>&5'
ac_link='echo ${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5;
${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5 2>&5'
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
# Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
ac_n= ac_c='
' ac_t=' '
else
ac_n=-n ac_c= ac_t=
fi
else
ac_n= ac_c='\c' ac_t=
fi
# Check whether --enable-sim-cflags or --disable-sim-cflags was given.
if test "${enable_sim_cflags+set}" = set; then
enableval="$enable_sim_cflags"
case "${enableval}" in
yes) sim_cflags="-O2 -fomit-frame-pointer";;
no) sim_cflags="";;
*) sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;;
esac
if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then
echo "Setting sim cflags = $sim_cflags" 6>&1
fi
else
sim_cflags=""
fi
# Check whether --enable-sim-warnings or --disable-sim-warnings was given.
if test "${enable_sim_warnings+set}" = set; then
enableval="$enable_sim_warnings"
case "${enableval}" in
yes) sim_warnings="-Werror -Wall -Wpointer-arith -Wmissing-prototypes";;
no) sim_warnings="-w";;
*) sim_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
esac
if test x"$silent" != x"yes" && test x"$sim_warnings" != x""; then
echo "Setting warning flags = $sim_warnings" 6>&1
fi
else
sim_warnings=""
fi
# Check whether --enable-sim-config or --disable-sim-config was given.
if test "${enable_sim_config+set}" = set; then
enableval="$enable_sim_config"
case "${enableval}" in
yes|no) { echo "configure: error: "No value supplied for --enable-sim-config=file"" 1>&2; exit 1; };;
*) if test -f "${srcdir}/${enableval}"; then
sim_config="${enableval}";
elif test -f "${srcdir}/${enableval}-config.h"; then
sim_config="${enableval}-config.h"
else
{ echo "configure: error: "Config file $enableval was not found"" 1>&2; exit 1; };
sim_config=std-config.h
fi;;
esac
if test x"$silent" != x"yes" && test x"$sim_config" != x""; then
echo "Setting config flags = $sim_config" 6>&1
fi
else
sim_config="std-config.h"
if test x"$silent" != x"yes"; then
echo "Setting config flags = $sim_config" 6>&1
fi
fi
# Check whether --enable-sim-opcode or --disable-sim-opcode was given.
if test "${enable_sim_opcode+set}" = set; then
enableval="$enable_sim_opcode"
case "${enableval}" in
yes|no) { echo "configure: error: "No value supplied for --enable-sim-opcode=file"" 1>&2; exit 1; };;
*) if test -f "${srcdir}/${enableval}"; then
sim_opcode="${enableval}"
elif test -f "${srcdir}/ppc-opcode-${enableval}"; then
sim_opcode="ppc-opcode-${enableval}"
else
{ echo "configure: error: "File $enableval is not an opcode rules file"" 1>&2; exit 1; };
sim_opcode="ppc-opcode-complex"
fi;;
esac
if test x"$silent" != x"yes" && test x"$sim_opcode" != x""; then
echo "Setting opcode flags = $sim_opcode" 6>&1
fi
else
sim_opcode="ppc-opcode-complex"
if test x"$silent" != x"yes"; then
echo "Setting opcode flags = $sim_opcode"
fi
fi
# Check whether --enable-sim-switch or --disable-sim-switch was given.
if test "${enable_sim_switch+set}" = set; then
enableval="$enable_sim_switch"
case "${enableval}" in
yes) sim_switch="-s";;
no) sim_switch="";;
*) { echo "configure: error: "--enable-sim-switch does not take a value"" 1>&2; exit 1; }; sim_switch="";;
esac
if test x"$silent" != x"yes" && test x"$sim_switch" != x""; then
echo "Setting switch flags = $sim_switch" 6>&1
fi
else
sim_switch="";
if test x"$silent" != x"yes"; then
echo "Setting switch flags = $sim_switch" 6>&1
fi
fi
# Check whether --enable-sim-duplicate or --disable-sim-duplicate was given.
if test "${enable_sim_duplicate+set}" = set; then
enableval="$enable_sim_duplicate"
case "${enableval}" in
yes) sim_dup="-e";;
no) sim_dup="";;
*) { echo "configure: error: "--enable-sim-duplicate does not take a value"" 1>&2; exit 1; }; sim_dup="";;
esac
if test x"$silent" != x"yes" && test x"$sim_dup" != x""; then
echo "Setting duplicate flags = $sim_dup" 6>&1
fi
else
sim_dup="-e"
if test x"$silent" != x"yes"; then
echo "Setting duplicate flags = $sim_dup" 6>&1
fi
fi
# Check whether --enable-sim-filter or --disable-sim-filter was given.
if test "${enable_sim_filter+set}" = set; then
enableval="$enable_sim_filter"
case "${enableval}" in
yes) { echo "configure: error: "--enable-sim-filter must be specified with a rule to filter or no"" 1>&2; exit 1; }; sim_filter="";;
no) sim_filter="";;
*) sim_filter="-f $enableval";;
esac
if test x"$silent" != x"yes" && test x"$sim_filter" != x""; then
echo "Setting filter flags = $sim_filter" 6>&1
fi
else
sim_filter="-f 64"
if test x"$silent" != x"yes"; then
echo "Setting filter flags = $sim_filter" 6>&1
fi
fi
# Check whether --enable-sim-icache or --disable-sim-icache was given.
if test "${enable_sim_icache+set}" = set; then
enableval="$enable_sim_icache"
icache=""
case "${enableval}" in
yes) sim_icache="-r 1024"; icache="1024";;
define) sim_icache="-r 1024 -R"; icache="1024";;
no) sim_icache="";;
*) sim_icache="-r ${enableval}"; icache="${enableval}";;
esac
if test x"$silent" != x"yes" && test x"$icache" != x""; then
echo "Setting instruction cache size to $icache"
fi
else
sim_icache="-r 1024"
if test x"$silent" != x"yes"; then
echo "Setting instruction cache size to 1024"
fi
fi
# Check whether --enable-sim-inline or --disable-sim-inline was given.
if test "${enable_sim_inline+set}" = set; then
enableval="$enable_sim_inline"
sim_inline=""
case "$enableval" in
no) sim_inline="-DDEFAULT_INLINE=0";;
0) sim_inline="-DDEFAULT_INLINE=0";;
yes | 2) sim_inline="-DDEFAULT_INLINE=ALL_INLINE";;
1) sim_inline="-DDEFAULT_INLINE=INLINE_LOCALS";;
*) for x in `echo "$enableval" | sed -e "s/,/ /g"`; do
new_flag=""
case "$x" in
*_INLINE=*) new_flag="-D$x";;
*_INLINE) new_flag="-D$x=ALL_INLINE";;
*=*) new_flag=`echo "$x" | sed -e "s/=/_INLINE=/" -e "s/^/-D/"`;;
*) new_flag="-D$x""_INLINE=ALL_INLINE";;
esac
if test x"$sim_inline" = x""; then
sim_inline="$new_flag"
else
sim_inline="$sim_inline $new_flag"
fi
done;;
esac
if test x"$silent" != x"yes" && test x"$sim_inline" != x""; then
echo "Setting inline flags = $sim_inline" 6>&1
fi
else
if test x"$GCC" != ""; then
sim_inline="-DDEFAULT_INLINE=INLINE_LOCALS"
if test x"$silent" != x"yes"; then
echo "Setting inline flags = $sim_inline" 6>&1
fi
else
sim_inline=""
fi
fi
# Check whether --enable-sim-bswap or --disable-sim-bswap was given.
if test "${enable_sim_bswap+set}" = set; then
enableval="$enable_sim_bswap"
case "${enableval}" in
yes) sim_bswap="-DWITH_BSWAP=1";;
no) sim_bswap="-DWITH_BSWAP=0";;
*) { echo "configure: error: "--enable-sim-bswap does not take a value"" 1>&2; exit 1; }; sim_bswap="";;
esac
if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
echo "Setting bswap flags = $sim_bswap" 6>&1
fi
else
sim_bswap=""
fi
# Check whether --enable-sim-endian or --disable-sim-endian was given.
if test "${enable_sim_endian+set}" = set; then
enableval="$enable_sim_endian"
case "${enableval}" in
yes) case "$target" in
*powerpc-*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
*powerpcle-*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
*) echo "Unknown target $target" 1>&6; sim_endian="-DWITH_TARGET_BYTE_ORDER=0";;
esac;;
no) sim_endian="-DWITH_TARGET_BYTE_ORDER=0";;
b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
*) { echo "configure: error: "Unknown value $enableval for --enable-sim-endian"" 1>&2; exit 1; }; sim_endian="";;
esac
if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
echo "Setting endian flags = $sim_endian" 6>&1
fi
else
sim_endian=""
fi
# Check whether --enable-sim-hostendian or --disable-sim-hostendian was given.
if test "${enable_sim_hostendian+set}" = set; then
enableval="$enable_sim_hostendian"
case "${enableval}" in
no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";;
b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";;
l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";;
*) { echo "configure: error: "Unknown value $enableval for --enable-sim-hostendian"" 1>&2; exit 1; }; sim_hostendian="";;
esac
if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then
echo "Setting hostendian flags = $sim_hostendian" 6>&1
fi
else
sim_hostendian=""
fi
# Check whether --enable-sim-smp or --disable-sim-smp was given.
if test "${enable_sim_smp+set}" = set; then
enableval="$enable_sim_smp"
case "${enableval}" in
yes) sim_smp="-DWITH_SMP=5";;
no) sim_smp="-DWITH_SMP=0";;
*) sim_smp="-DWITH_SMP=$enableval";;
esac
if test x"$silent" != x"yes" && test x"$sim_smp" != x""; then
echo "Setting smp flags = $sim_smp" 6>&1
fi
else
sim_smp="-DWITH_SMP=0"
if test x"$silent" != x"yes"; then
echo "Setting smp flags = $sim_smp" 6>&1
fi
fi
# Check whether --enable-sim-xor-endian or --disable-sim-xor-endian was given.
if test "${enable_sim_xor_endian+set}" = set; then
enableval="$enable_sim_xor_endian"
case "${enableval}" in
yes) sim_xor_endian="-DWITH_XOR_ENDIAN=8";;
no) sim_xor_endian="-DWITH_XOR_ENDIAN=0";;
*) sim_xor_endian="-DWITH_XOR_ENDIAN=$enableval";;
esac
else
sim_xor_endian=""
fi
# Check whether --enable-sim-bitsize or --disable-sim-bitsize was given.
if test "${enable_sim_bitsize+set}" = set; then
enableval="$enable_sim_bitsize"
case "${enableval}" in
32|64) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=$enableval";;
*) { echo "configure: error: "--enable-sim-bitsize was given $enableval" 1>&2; exit 1; }; sim_bitsize="";;
esac
if test x"$silent" != x"yes" && test x"$sim_bitsize" != x""; then
echo "Setting bitsize flags = $sim_bitsize" 6>&1
fi
else
sim_bitsize=""
fi
# Check whether --enable-sim-hostbitsize or --disable-sim-hostbitsize was given.
if test "${enable_sim_hostbitsize+set}" = set; then
enableval="$enable_sim_hostbitsize"
case "${enableval}" in
32|64) sim_hostbitsize="-DWITH_HOST_WORD_BITSIZE=$enableval";;
*) { echo "configure: error: "--enable-sim-hostbitsize was given $enableval" 1>&2; exit 1; }; sim_hostbitsize="";;
esac
if test x"$silent" != x"yes" && test x"$sim_hostbitsize" != x""; then
echo "Setting hostbitsize flags = $sim_hostbitsize" 6>&1
fi
else
sim_hostbitsize=""
fi
# Check whether --enable-sim-env or --disable-sim-env was given.
if test "${enable_sim_env+set}" = set; then
enableval="$enable_sim_env"
case "${enableval}" in
operating | os | oea) sim_env="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
virtual | vea) sim_env="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
user | uea) sim_env="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
no) sim_env="-DWITH_ENVIRONMENT=0";;
*) { echo "configure: error: "Unknown value $enableval passed to --enable-sim-env"" 1>&2; exit 1; }; sim_env="";;
esac
if test x"$silent" != x"yes" && test x"$sim_env" != x""; then
echo "Setting env flags = $sim_env" 6>&1
fi
else
sim_env=""
fi
# Check whether --enable-sim-timebase or --disable-sim-timebase was given.
if test "${enable_sim_timebase+set}" = set; then
enableval="$enable_sim_timebase"
case "${enableval}" in
yes) sim_timebase="-DWITH_TIME_BASE=1";;
no) sim_timebase="-DWITH_TIME_BASE=0";;
*) { echo "configure: error: "--enable-sim-timebase does not take a value"" 1>&2; exit 1; }; sim_timebase="";;
esac
if test x"$silent" != x"yes" && test x"$sim_timebase" != x""; then
echo "Setting timebase flags = $sim_timebase" 6>&1
fi
else
sim_timebase=""
fi
# Check whether --enable-sim-alignment or --disable-sim-alignment was given.
if test "${enable_sim_alignment+set}" = set; then
enableval="$enable_sim_alignment"
case "${enableval}" in
yes | strict | STRICT) sim_alignment="-DWITH_ALIGNMENT=STRICT_ALIGNMENT";;
no | nonstrict | NONSTRICT) sim_alignment="-DWITH_ALIGNMENT=NONSTRICT_ALIGNMENT";;
*) { echo "configure: error: "Unknown value $enableval passed to --enable-sim-alignment"" 1>&2; exit 1; }; sim_alignment="";;
esac
if test x"$silent" != x"yes" && test x"$sim_alignment" != x""; then
echo "Setting alignment flags = $sim_alignment" 6>&1
fi
else
sim_alignment=""
fi
# Check whether --enable-sim-trace or --disable-sim-trace was given.
if test "${enable_sim_trace+set}" = set; then
enableval="$enable_sim_trace"
case "${enableval}" in
yes) sim_trace="-DWITH_TRACE=1";;
no) sim_trace="-DWITH_TRACE=0";;
*) { echo "configure: error: "--enable-sim-trace does not take a value"" 1>&2; exit 1; }; sim_trace="";;
esac
if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then
echo "Setting trace flags = $sim_trace" 6>&1
fi
else
sim_trace=""
fi
# Check whether --enable-sim-assert or --disable-sim-assert was given.
if test "${enable_sim_assert+set}" = set; then
enableval="$enable_sim_assert"
case "${enableval}" in
yes) sim_assert="-DWITH_ASSERT=1";;
no) sim_assert="-DWITH_ASSERT=0";;
*) { echo "configure: error: "--enable-sim-assert does not take a value"" 1>&2; exit 1; }; sim_assert="";;
esac
if test x"$silent" != x"yes" && test x"$sim_assert" != x""; then
echo "Setting assert flags = $sim_assert" 6>&1
fi
else
sim_assert=""
fi
# Check whether --enable-sim-reserved-bits or --disable-sim-reserved-bits was given.
if test "${enable_sim_reserved_bits+set}" = set; then
enableval="$enable_sim_reserved_bits"
case "${enableval}" in
yes) sim_reserved="-DWITH_RESERVED_BITS=1";;
no) sim_reserved="-DWITH_RESERVED_BITS=0";;
*) { echo "configure: error: "--enable-sim-reserved-bits does not take a value"" 1>&2; exit 1; }; sim_reserved="";;
esac
if test x"$silent" != x"yes" && test x"$sim_reserved" != x""; then
echo "Setting reserved flags = $sim_reserved" 6>&1
fi
else
sim_reserved=""
fi
# Check whether --enable-sim-float or --disable-sim-float was given.
if test "${enable_sim_float+set}" = set; then
enableval="$enable_sim_float"
case "${enableval}" in
yes | hard) sim_float="-DWITH_FLOATING_POINT=HARD_FLOATING_POINT";;
no | soft) sim_float="-DWITH_FLOATING_POINT=SOFT_FLOATING_POINT";;
*) { echo "configure: error: "Unknown value $enableval passed to --enable-sim-float"" 1>&2; exit 1; }; sim_float="";;
esac
if test x"$silent" != x"yes" && test x"$sim_float" != x""; then
echo "Setting float flags = $sim_float" 6>&1
fi
else
sim_float=""
fi
# Check whether --enable-sim-monitor or --disable-sim-monitor was given.
if test "${enable_sim_monitor+set}" = set; then
enableval="$enable_sim_monitor"
case "${enableval}" in
yes) sim_monitor="-DWITH_MON='MONITOR_INSTRUCTION_ISSUE | MONITOR_LOAD_STORE_UNIT'";;
no) sim_monitor="-DWITH_MON=0";;
instruction) sim_monitor="-DWITH_MON=MONITOR_INSTRUCTION_ISSUE";;
memory) sim_monitor="-DWITH_MON=MONITOR_LOAD_STORE_UNIT";;
*) { echo "configure: error: "Unknown value $enableval passed to --enable-sim-mon"" 1>&2; exit 1; }; sim_env="";;
esac
if test x"$silent" != x"yes" && test x"$sim_monitor" != x""; then
echo "Setting monitor flags = $sim_monitor" 6>&1
fi
else
sim_monitor=""
fi
# Check whether --enable-sim-model or --disable-sim-model was given.
if test "${enable_sim_model+set}" = set; then
enableval="$enable_sim_model"
case "${enableval}" in
yes|no) { echo "configure: error: "No value supplied for --enable-sim-model=model"" 1>&2; exit 1; };;
*) sim_model="-DWITH_MODEL=${enableval}";;
esac
if test x"$silent" != x"yes" && test x"$sim_model" != x""; then
echo "Setting model flags = $sim_model" 6>&1
fi
else
sim_model=""
fi
# Check whether --enable-sim-default-model or --disable-sim-default-model was given.
if test "${enable_sim_default_model+set}" = set; then
enableval="$enable_sim_default_model"
case "${enableval}" in
yes|no) { echo "configure: error: "No value supplied for --enable-sim-default-model=model"" 1>&2; exit 1; };;
*) sim_default_model="-DWITH_DEFAULT_MODEL=${enableval}";;
esac
if test x"$silent" != x"yes" && test x"$sim_default_model" != x""; then
echo "Setting default-model flags = $sim_default_model" 6>&1
fi
else
sim_model=""
fi
# Check whether --enable-sim-model-issue or --disable-sim-model-issue was given.
if test "${enable_sim_model_issue+set}" = set; then
enableval="$enable_sim_model_issue"
case "${enableval}" in
yes) sim_model_issue="-DWITH_MODEL_ISSUE=MODEL_ISSUE_PROCESS";;
no) sim_model_issue="-DWITH_MODEL_ISSUE=MODEL_ISSUE_IGNORE";;
*) { echo "configure: error: "--enable-sim-model-issue does not take a value"" 1>&2; exit 1; }; sim_model_issue="";;
esac
if test x"$silent" != x"yes"; then
echo "Setting model-issue flags = $sim_model_issue" 6>&1
fi
else
sim_model_issue=""
fi
ac_aux_dir=
for ac_dir in `cd $srcdir;pwd`/../.. $srcdir/`cd $srcdir;pwd`/../..; do
if test -f $ac_dir/install-sh; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install-sh -c"
break
elif test -f $ac_dir/install.sh; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install.sh -c"
break
fi
done
if test -z "$ac_aux_dir"; then
{ echo "configure: error: can not find install-sh or install.sh in `cd $srcdir;pwd`/../.. $srcdir/`cd $srcdir;pwd`/../.." 1>&2; exit 1; }
fi
ac_config_guess=$ac_aux_dir/config.guess
ac_config_sub=$ac_aux_dir/config.sub
ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
# Do some error checking and defaulting for the host and target type.
# The inputs are:
# configure --host=HOST --target=TARGET --build=BUILD NONOPT
#
# The rules are:
# 1. You are not allowed to specify --host, --target, and nonopt at the
# same time.
# 2. Host defaults to nonopt.
# 3. If nonopt is not specified, then host defaults to the current host,
# as determined by config.guess.
# 4. Target and build default to nonopt.
# 5. If nonopt is not specified, then target and build default to host.
# The aliases save the names the user supplied, while $host etc.
# will get canonicalized.
case $host---$target---$nonopt in
NONE---*---* | *---NONE---* | *---*---NONE) ;;
*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
esac
# Make sure we can run config.sub.
if $ac_config_sub sun4 >/dev/null 2>&1; then :
else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
host_alias=$host
case "$host_alias" in
NONE)
case $nonopt in
NONE)
if host_alias=`$ac_config_guess`; then :
else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
fi ;;
*) host_alias=$nonopt ;;
esac ;;
esac
host=`$ac_config_sub $host_alias`
host_cpu=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
host_vendor=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
host_os=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
target_alias=$target
case "$target_alias" in
NONE)
case $nonopt in
NONE) target_alias=$host_alias ;;
*) target_alias=$nonopt ;;
esac ;;
esac
target=`$ac_config_sub $target_alias`
target_cpu=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
target_vendor=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
target_os=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
build_alias=$build
case "$build_alias" in
NONE)
case $nonopt in
NONE) build_alias=$host_alias ;;
*) build_alias=$nonopt ;;
esac ;;
esac
build=`$ac_config_sub $build_alias`
build_cpu=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
build_vendor=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
build_os=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
echo "$ac_t""$build" 1>&6
test "$host_alias" != "$target_alias" &&
test "$program_prefix$program_suffix$program_transform_name" = \
NONENONEs,x,x, &&
program_prefix=${target_alias}-
if test "$program_transform_name" = s,x,x,; then
program_transform_name=
else
# Double any \ or $. echo might interpret backslashes.
cat <<\EOF_SED > conftestsed
s,\\,\\\\,g; s,\$,$$,g
EOF_SED
program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
rm -f conftestsed
fi
test "$program_prefix" != NONE &&
program_transform_name="s,^,${program_prefix},; $program_transform_name"
# Use a double $ so make ignores it.
test "$program_suffix" != NONE &&
program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
# sed with no file args requires a program.
test "$program_transform_name" = "" && program_transform_name="s,x,x,"
. ${srcdir}/../../bfd/configure.host
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_CC="gcc"
break
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_prog_CC" && ac_cv_prog_CC="cc"
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
echo "$ac_t""$CC" 1>&6
else
echo "$ac_t""no" 1>&6
fi
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.c <<EOF
#ifdef __GNUC__
yes;
#endif
EOF
if ${CC-cc} -E conftest.c 2>&5 | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
fi
fi
echo "$ac_t""$ac_cv_prog_gcc" 1>&6
if test $ac_cv_prog_gcc = yes; then
GCC=yes
if test "${CFLAGS+set}" != set; then
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
if eval "test \"`echo '$''{'ac_cv_prog_gcc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo 'void f(){}' > conftest.c
if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
ac_cv_prog_gcc_g=yes
else
ac_cv_prog_gcc_g=no
fi
rm -f conftest*
fi
echo "$ac_t""$ac_cv_prog_gcc_g" 1>&6
if test $ac_cv_prog_gcc_g = yes; then
CFLAGS="-g -O"
else
CFLAGS="-O"
fi
fi
else
GCC=
test "${CFLAGS+set}" = set || CFLAGS="-g"
fi
AR=${AR-ar}
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$RANLIB"; then
ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_RANLIB="ranlib"
break
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
fi
fi
RANLIB="$ac_cv_prog_RANLIB"
if test -n "$RANLIB"; then
echo "$ac_t""$RANLIB" 1>&6
else
echo "$ac_t""no" 1>&6
fi
for ac_func in getrusage
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 1312 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
char $ac_func();
int main() { return 0; }
int t() {
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif
; return 0; }
EOF
if eval $ac_link; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
rm -rf conftest*
eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
echo "$ac_t""yes" 1>&6
ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
else
echo "$ac_t""no" 1>&6
fi
done
# Put a plausible default for CC_FOR_BUILD in Makefile.
# If we cannot run a trivial program, we must be cross compiling.
echo $ac_n "checking whether cross-compiling""... $ac_c" 1>&6
if eval "test \"`echo '$''{'ac_cv_c_cross'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$cross_compiling" = yes; then
ac_cv_c_cross=yes
else
cat > conftest.$ac_ext <<EOF
#line 1367 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
eval $ac_link
if test -s conftest && (./conftest; exit) 2>/dev/null; then
ac_cv_c_cross=no
else
ac_cv_c_cross=yes
fi
fi
rm -fr conftest*
fi
echo "$ac_t""$ac_cv_c_cross" 1>&6
cross_compiling=$ac_cv_c_cross
if test "x$cross_compiling" = "xno"; then
CC_FOR_BUILD='$(CC)'
else
CC_FOR_BUILD=gcc
fi
echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_bigendian=unknown
# See if sys/param.h defines the BYTE_ORDER macro.
cat > conftest.$ac_ext <<EOF
#line 1398 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
int main() { return 0; }
int t() {
#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN
bogus endian macros
#endif
; return 0; }
EOF
if eval $ac_compile; then
rm -rf conftest*
# It does; now see whether it defined to BIG_ENDIAN or not.
cat > conftest.$ac_ext <<EOF
#line 1414 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
int main() { return 0; }
int t() {
#if BYTE_ORDER != BIG_ENDIAN
not big endian
#endif
; return 0; }
EOF
if eval $ac_compile; then
rm -rf conftest*
ac_cv_c_bigendian=yes
else
rm -rf conftest*
ac_cv_c_bigendian=no
fi
rm -f conftest*
fi
rm -f conftest*
if test $ac_cv_c_bigendian = unknown; then
if test "$cross_compiling" = yes; then
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
#line 1443 "configure"
#include "confdefs.h"
main () {
/* Are we little or big endian? From Harbison&Steele. */
union
{
long l;
char c[sizeof (long)];
} u;
u.l = 1;
exit (u.c[sizeof (long) - 1] == 1);
}
EOF
eval $ac_link
if test -s conftest && (./conftest; exit) 2>/dev/null; then
ac_cv_c_bigendian=no
else
ac_cv_c_bigendian=yes
fi
fi
rm -fr conftest*
fi
fi
echo "$ac_t""$ac_cv_c_bigendian" 1>&6
if test $ac_cv_c_bigendian = yes; then
cat >> confdefs.h <<\EOF
#define WORDS_BIGENDIAN 1
EOF
fi
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
fi
if test -z "$CPP"; then
if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# This must be in double quotes, not single quotes, because CPP may get
# substituted into the Makefile and "${CC-cc}" will confuse make.
CPP="${CC-cc} -E"
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
#line 1492 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
eval "$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
:
else
echo "$ac_err" >&5
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
#line 1506 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
eval "$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
:
else
echo "$ac_err" >&5
rm -rf conftest*
CPP=/lib/cpp
fi
rm -f conftest*
fi
rm -f conftest*
ac_cv_prog_CPP="$CPP"
fi
CPP="$ac_cv_prog_CPP"
else
ac_cv_prog_CPP="$CPP"
fi
echo "$ac_t""$CPP" 1>&6
for ac_hdr in string.h strings.h stdlib.h time.h sys/types.h sys/time.h sys/times.h unistd.h sys/resource.h
do
ac_safe=`echo "$ac_hdr" | tr './\055' '___'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 1539 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
eval "$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
else
echo "$ac_err" >&5
rm -rf conftest*
eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
ac_tr_hdr=HAVE_`echo $ac_hdr | tr 'abcdefghijklmnopqrstuvwxyz./\055' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ___'`
cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
else
echo "$ac_t""no" 1>&6
fi
done
ac_header_dirent=no
for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h
do
ac_safe=`echo "$ac_hdr" | tr './\055' '___'`
echo $ac_n "checking for $ac_hdr that defines DIR""... $ac_c" 1>&6
if eval "test \"`echo '$''{'ac_cv_header_dirent_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 1576 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <$ac_hdr>
int main() { return 0; }
int t() {
DIR *dirp = 0;
; return 0; }
EOF
if eval $ac_compile; then
rm -rf conftest*
eval "ac_cv_header_dirent_$ac_safe=yes"
else
rm -rf conftest*
eval "ac_cv_header_dirent_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_dirent_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
ac_tr_hdr=HAVE_`echo $ac_hdr | tr 'abcdedfghijklmnopqrstuvwxyz./\055' 'ABCDEDFGHIJKLMNOPQRSTUVWXYZ___'`
cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
ac_header_dirent=$ac_hdr; break
else
echo "$ac_t""no" 1>&6
fi
done
# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
if test $ac_header_dirent = dirent.h; then
echo $ac_n "checking for -ldir""... $ac_c" 1>&6
ac_lib_var=`echo dir | tr '.-/+' '___p'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-ldir $LIBS"
cat > conftest.$ac_ext <<EOF
#line 1616 "configure"
#include "confdefs.h"
int main() { return 0; }
int t() {
opendir()
; return 0; }
EOF
if eval $ac_link; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
LIBS="$LIBS -ldir"
else
echo "$ac_t""no" 1>&6
fi
else
echo $ac_n "checking for -lx""... $ac_c" 1>&6
ac_lib_var=`echo x | tr '.-/+' '___p'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-lx $LIBS"
cat > conftest.$ac_ext <<EOF
#line 1651 "configure"
#include "confdefs.h"
int main() { return 0; }
int t() {
opendir()
; return 0; }
EOF
if eval $ac_link; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
LIBS="$LIBS -lx"
else
echo "$ac_t""no" 1>&6
fi
fi
trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs. It is not useful on other systems.
# If it contains results you don't want to keep, you may remove or edit it.
#
# By default, configure uses ./config.cache as the cache file,
# creating it if it does not exist already. You can give configure
# the --cache-file=FILE option to use a different cache file; that is
# what configure does when it calls configure scripts in
# subdirectories, so they share the cache.
# Giving --cache-file=/dev/null disables caching, for debugging configure.
# config.status only pays attention to the cache file if you give it the
# --recheck option to rerun configure.
#
EOF
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
sed -n "s/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=\${\1='\2'}/p" \
>> confcache
if cmp -s $cache_file confcache; then
:
else
if test -w $cache_file; then
echo "updating cache $cache_file"
cat confcache > $cache_file
else
echo "not updating unwritable cache $cache_file"
fi
fi
rm -f confcache
trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
# Any assignment to VPATH causes Sun make to only execute
# the first set of double-colon rules, so remove it if not needed.
# If there is a colon in the path, we need to keep it.
if test "x$srcdir" = x.; then
ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d'
fi
trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
DEFS=-DHAVE_CONFIG_H
# Without the "./", some shells look in PATH for config.status.
: ${CONFIG_STATUS=./config.status}
echo creating $CONFIG_STATUS
rm -f $CONFIG_STATUS
cat > $CONFIG_STATUS <<EOF
#! /bin/sh
# Generated automatically by configure.
# Run this file to recreate the current configuration.
# This directory was configured as follows,
# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
#
# $0 $ac_configure_args
#
# Compiler output produced by configure, useful for debugging
# configure, is in ./config.log if it exists.
ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
for ac_option
do
case "\$ac_option" in
-recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-version | --version | --versio | --versi | --vers | --ver | --ve | --v)
echo "$CONFIG_STATUS generated by autoconf version 2.7"
exit 0 ;;
-help | --help | --hel | --he | --h)
echo "\$ac_cs_usage"; exit 0 ;;
*) echo "\$ac_cs_usage"; exit 1 ;;
esac
done
ac_given_srcdir=$srcdir
trap 'rm -fr `echo "Makefile config.h:config.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF
cat >> $CONFIG_STATUS <<EOF
# Protect against being on the right side of a sed subst in config.status.
sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
$ac_vpsub
$extrasub
s%@CFLAGS@%$CFLAGS%g
s%@CPPFLAGS@%$CPPFLAGS%g
s%@CXXFLAGS@%$CXXFLAGS%g
s%@DEFS@%$DEFS%g
s%@LDFLAGS@%$LDFLAGS%g
s%@LIBS@%$LIBS%g
s%@exec_prefix@%$exec_prefix%g
s%@prefix@%$prefix%g
s%@program_transform_name@%$program_transform_name%g
s%@bindir@%$bindir%g
s%@sbindir@%$sbindir%g
s%@libexecdir@%$libexecdir%g
s%@datadir@%$datadir%g
s%@sysconfdir@%$sysconfdir%g
s%@sharedstatedir@%$sharedstatedir%g
s%@localstatedir@%$localstatedir%g
s%@libdir@%$libdir%g
s%@includedir@%$includedir%g
s%@oldincludedir@%$oldincludedir%g
s%@infodir@%$infodir%g
s%@mandir@%$mandir%g
s%@host@%$host%g
s%@host_alias@%$host_alias%g
s%@host_cpu@%$host_cpu%g
s%@host_vendor@%$host_vendor%g
s%@host_os@%$host_os%g
s%@target@%$target%g
s%@target_alias@%$target_alias%g
s%@target_cpu@%$target_cpu%g
s%@target_vendor@%$target_vendor%g
s%@target_os@%$target_os%g
s%@build@%$build%g
s%@build_alias@%$build_alias%g
s%@build_cpu@%$build_cpu%g
s%@build_vendor@%$build_vendor%g
s%@build_os@%$build_os%g
s%@CC@%$CC%g
s%@HDEFINES@%$HDEFINES%g
s%@AR@%$AR%g
s%@RANLIB@%$RANLIB%g
s%@sim_cflags@%$sim_cflags%g
s%@sim_warnings@%$sim_warnings%g
s%@sim_config@%$sim_config%g
s%@sim_opcode@%$sim_opcode%g
s%@sim_switch@%$sim_switch%g
s%@sim_dup@%$sim_dup%g
s%@sim_filter@%$sim_filter%g
s%@sim_icache@%$sim_icache%g
s%@sim_inline@%$sim_inline%g
s%@sim_bswap@%$sim_bswap%g
s%@sim_endian@%$sim_endian%g
s%@sim_xor_endian@%$sim_xor_endian%g
s%@sim_hostendian@%$sim_hostendian%g
s%@sim_smp@%$sim_smp%g
s%@sim_bitsize@%$sim_bitsize%g
s%@sim_hostbitsize@%$sim_hostbitsize%g
s%@sim_env@%$sim_env%g
s%@sim_timebase@%$sim_timebase%g
s%@sim_alignment@%$sim_alignment%g
s%@sim_float@%$sim_float%g
s%@sim_trace@%$sim_trace%g
s%@sim_assert@%$sim_assert%g
s%@sim_reserved@%$sim_reserved%g
s%@sim_monitor@%$sim_monitor%g
s%@sim_model@%$sim_model%g
s%@sim_default_model@%$sim_default_model%g
s%@sim_model_issue@%$sim_model_issue%g
s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g
s%@WORDS_BIGENDIAN@%$WORDS_BIGENDIAN%g
s%@CPP@%$CPP%g
CEOF
EOF
cat >> $CONFIG_STATUS <<EOF
CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
# Support "outfile[:infile]", defaulting infile="outfile.in".
case "$ac_file" in
*:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
*) ac_file_in="${ac_file}.in" ;;
esac
# Adjust relative srcdir, etc. for subdirectories.
# Remove last slash and all that follows it. Not all systems have dirname.
ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
# The file is in a subdirectory.
test ! -d "$ac_dir" && mkdir "$ac_dir"
ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
# A "../" for each directory in $ac_dir_suffix.
ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
else
ac_dir_suffix= ac_dots=
fi
case "$ac_given_srcdir" in
.) srcdir=.
if test -z "$ac_dots"; then top_srcdir=.
else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
/*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
*) # Relative path.
srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
top_srcdir="$ac_dots$ac_given_srcdir" ;;
esac
echo creating "$ac_file"
rm -f "$ac_file"
configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
case "$ac_file" in
*Makefile*) ac_comsub="1i\\
# $configure_input" ;;
*) ac_comsub= ;;
esac
sed -e "$ac_comsub
s%@configure_input@%$configure_input%g
s%@srcdir@%$srcdir%g
s%@top_srcdir@%$top_srcdir%g
" -f conftest.subs $ac_given_srcdir/$ac_file_in > $ac_file
fi; done
rm -f conftest.subs
# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
# NAME is the cpp macro being defined and VALUE is the value it is being given.
#
# ac_d sets the value in "#define NAME VALUE" lines.
ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)'
ac_dB='\([ ][ ]*\)[^ ]*%\1#\2'
ac_dC='\3'
ac_dD='%g'
# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
ac_uB='\([ ]\)%\1#\2define\3'
ac_uC=' '
ac_uD='\4%g'
# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
ac_eB='$%\1#\2define\3'
ac_eC=' '
ac_eD='%g'
CONFIG_HEADERS=${CONFIG_HEADERS-"config.h:config.in"}
for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
# Support "outfile[:infile]", defaulting infile="outfile.in".
case "$ac_file" in
*:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
*) ac_file_in="${ac_file}.in" ;;
esac
echo creating $ac_file
rm -f conftest.frag conftest.in conftest.out
cp $ac_given_srcdir/$ac_file_in conftest.in
EOF
# Transform confdefs.h into a sed script conftest.vals that substitutes
# the proper values into config.h.in to produce config.h. And first:
# Protect against being on the right side of a sed subst in config.status.
# Protect against being in an unquoted here document in config.status.
rm -f conftest.vals
cat > conftest.hdr <<\EOF
s/[\\&%]/\\&/g
s%[\\$`]%\\&%g
s%#define \([A-Za-z_][A-Za-z0-9_]*\) \(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
s%ac_d%ac_u%gp
s%ac_u%ac_e%gp
EOF
sed -n -f conftest.hdr confdefs.h > conftest.vals
rm -f conftest.hdr
# This sed command replaces #undef with comments. This is necessary, for
# example, in the case of _POSIX_SOURCE, which is predefined and required
# on some systems where configure will not decide to define it.
cat >> conftest.vals <<\EOF
s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
EOF
# Break up conftest.vals because some shells have a limit on
# the size of here documents, and old seds have small limits too.
# Maximum number of lines to put in a single here document.
ac_max_here_lines=12
rm -f conftest.tail
while :
do
ac_lines=`grep -c . conftest.vals`
# grep -c gives empty output for an empty file on some AIX systems.
if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
# Write a limited-size here document to conftest.frag.
echo ' cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
echo 'CEOF
sed -f conftest.frag conftest.in > conftest.out
rm -f conftest.in
mv conftest.out conftest.in
' >> $CONFIG_STATUS
sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
rm -f conftest.vals
mv conftest.tail conftest.vals
done
rm -f conftest.vals
cat >> $CONFIG_STATUS <<\EOF
rm -f conftest.frag conftest.h
echo "/* $ac_file. Generated automatically by configure. */" > conftest.h
cat conftest.in >> conftest.h
rm -f conftest.in
if cmp -s $ac_file conftest.h 2>/dev/null; then
echo "$ac_file is unchanged"
rm -f conftest.h
else
rm -f $ac_file
mv conftest.h $ac_file
fi
fi; done
case x$CONFIG_HEADERS in xconfig.h:config.in) echo > stamp-h ;; esac
exit 0
EOF
chmod +x $CONFIG_STATUS
rm -fr confdefs* $ac_clean_files
test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
Reference in New Issue View Git Blame Copy Permalink