binutils-gdb/gdb/i386-tdep.h

198 lines
6.0 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* Target-dependent code for GDB, the GNU debugger.
Copyright 2001, 2002, 2003
Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
#ifndef I386_TDEP_H
#define I386_TDEP_H
struct reggroup;
struct gdbarch;
struct frame_info;
/* GDB's i386 target supports both the 32-bit Intel Architecture
(IA-32) and the 64-bit AMD x86-64 architecture. Internally it uses
a similar register layout for both.
- General purpose registers
- FPU data registers
- FPU control registers
- SSE data registers
- SSE control register
The general purpose registers for the x86-64 architecture are quite
different from IA-32. Therefore, the FP0_REGNUM target macro
determines the register number at which the FPU data registers
start. The number of FPU data and control registers is the same
for both architectures. The number of SSE registers however,
differs and is determined by the num_xmm_regs member of `struct
gdbarch_tdep'. */
/* Convention for returning structures. */
enum struct_return
{
pcc_struct_return, /* Return "short" structures in memory. */
reg_struct_return /* Return "short" structures in registers. */
};
/* i386 architecture specific information. */
struct gdbarch_tdep
{
/* Number of SSE registers. */
int num_xmm_regs;
/* Offset of saved PC in jmp_buf. */
int jb_pc_offset;
/* Convention for returning structures. */
enum struct_return struct_return;
/* Address range where sigtramp lives. */
CORE_ADDR sigtramp_start;
CORE_ADDR sigtramp_end;
/* Get address of sigcontext for sigtramp. */
CORE_ADDR (*sigcontext_addr) (struct frame_info *);
/* Offset of registers in `struct sigcontext'. */
int *sc_reg_offset;
int sc_num_regs;
/* Offset of saved PC and SP in `struct sigcontext'. Usage of these
is deprecated, please use `sc_reg_offset' instead. */
int sc_pc_offset;
int sc_sp_offset;
};
/* Floating-point registers. */
#define FPU_REG_RAW_SIZE 10
/* All FPU control regusters (except for FIOFF and FOOFF) are 16-bit
(at most) in the FPU, but are zero-extended to 32 bits in GDB's
register cache. */
/* "Generic" floating point control register. */
#define FPC_REGNUM (FP0_REGNUM + 8)
/* FPU control word. */
#define FCTRL_REGNUM FPC_REGNUM
/* FPU status word. */
#define FSTAT_REGNUM (FPC_REGNUM + 1)
/* FPU register tag word. */
#define FTAG_REGNUM (FPC_REGNUM + 2)
/* FPU instruction's code segment selector, called "FPU Instruction
Pointer Selector" in the IA-32 manuals. */
#define FISEG_REGNUM (FPC_REGNUM + 3)
/* FPU instruction's offset within segment. */
#define FIOFF_REGNUM (FPC_REGNUM + 4)
/* FPU operand's data segment. */
#define FOSEG_REGNUM (FPC_REGNUM + 5)
/* FPU operand's offset within segment */
#define FOOFF_REGNUM (FPC_REGNUM + 6)
/* FPU opcode, bottom eleven bits. */
#define FOP_REGNUM (FPC_REGNUM + 7)
/* Return non-zero if REGNUM matches the FP register and the FP
register set is active. */
extern int i386_fp_regnum_p (int regnum);
extern int i386_fpc_regnum_p (int regnum);
/* SSE registers. */
/* First SSE data register. */
#define XMM0_REGNUM (FPC_REGNUM + 8)
/* SSE control/status register. */
#define MXCSR_REGNUM \
(XMM0_REGNUM + gdbarch_tdep (current_gdbarch)->num_xmm_regs)
/* Return non-zero if REGNUM matches the SSE register and the SSE
register set is active. */
extern int i386_sse_regnum_p (int regnum);
extern int i386_mxcsr_regnum_p (int regnum);
/* FIXME: kettenis/2001-11-24: Obsolete macro's. */
#define FCS_REGNUM FISEG_REGNUM
#define FCOFF_REGNUM FIOFF_REGNUM
#define FDS_REGNUM FOSEG_REGNUM
#define FDOFF_REGNUM FOOFF_REGNUM
/* Register numbers of various important registers. */
#define I386_EAX_REGNUM 0 /* %eax */
#define I386_EDX_REGNUM 2 /* %edx */
#define I386_ESP_REGNUM 4 /* %esp */
#define I386_EBP_REGNUM 5 /* %ebp */
#define I386_EIP_REGNUM 8 /* %eip */
#define I386_EFLAGS_REGNUM 9 /* %eflags */
#define I386_ST0_REGNUM 16 /* %st(0) */
#define I386_NUM_GREGS 16
#define I386_NUM_FREGS 16
#define I386_NUM_XREGS 9
#define I386_SSE_NUM_REGS (I386_NUM_GREGS + I386_NUM_FREGS \
+ I386_NUM_XREGS)
/* Size of the largest register. */
#define I386_MAX_REGISTER_SIZE 16
/* Functions exported from i386-tdep.c. */
extern CORE_ADDR i386_pe_skip_trampoline_code (CORE_ADDR pc, char *name);
extern int i386_frameless_signal_p (struct frame_info *frame);
/* Return the name of register REG. */
extern char const *i386_register_name (int reg);
/* Return non-zero if REGNUM is a member of the specified group. */
extern int i386_register_reggroup_p (struct gdbarch *gdbarch, int regnum,
struct reggroup *group);
/* Initialize a basic ELF architecture variant. */
extern void i386_elf_init_abi (struct gdbarch_info, struct gdbarch *);
/* Initialize a SVR4 architecture variant. */
extern void i386_svr4_init_abi (struct gdbarch_info, struct gdbarch *);
/* Functions and variables exported from i386bsd-tdep.c. */
extern void i386bsd_init_abi (struct gdbarch_info, struct gdbarch *);
extern CORE_ADDR i386fbsd_sigtramp_start;
extern CORE_ADDR i386fbsd_sigtramp_end;
extern CORE_ADDR i386obsd_sigtramp_start;
extern CORE_ADDR i386obsd_sigtramp_end;
extern int i386fbsd4_sc_reg_offset[];
extern int i386fbsd_sc_reg_offset[];
extern int i386nbsd_sc_reg_offset[];
extern int i386obsd_sc_reg_offset[];
extern int i386bsd_sc_reg_offset[];
#endif /* i386-tdep.h */