binutils-gdb/ChangeLog
1992-04-21 04:05:37 +00:00

350 lines
11 KiB
Plaintext

Mon Apr 20 18:16:36 1992 K. Richard Pixley (rich@rtl.cygnus.com)
* Makefile.in: explicitly pass CFLAGS on recursion. no longer pass
MINUS_G (this can be done with CFLAGS). Default CFLAGS to -g.
Fri Apr 17 18:27:51 1992 Per Bothner (bothner@cygnus.com)
* configure: mkdir ${subdir} as needed.
Wed Apr 15 17:27:34 1992 K. Richard Pixley (rich@rtl.cygnus.com)
* Makefile.in: no longer pass against on recursion.
* Makefile.in: added .NOEXPORT: so that stray makefile_frag
definitions are not inherited.
* configure: correct makesrcdir when subdir is .
Tue Apr 14 11:56:09 1992 Per Bothner (bothner@cygnus.com)
* configure: Add support for 'subdirs' variable, which is
like 'configdirs', except that configure doesn't re-invoke
itself for subdirs, it just creates a Makefile for each subdir.
* configure.texi: Document subdirs.
Mon Apr 13 18:50:16 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
* configure.in: added flex to configdirs
Mon Apr 13 18:43:55 1992 K. Richard Pixley (rich@cygnus.com)
* Makefile.in: remove clean-stamps from clean.
Sat Apr 11 03:52:03 1992 John Gilmore (gnu at cygnus.com)
* configure.in: Add gdbtest to configdirs.
Fri Apr 10 23:11:49 1992 Fred Fish (fnf@cygnus.com)
* Makefile.in (MINUS_G): Add macro, default to -g, pass on
to recursive makes.
* configure.in: Recognize new ncr3000 config.
Wed Apr 8 23:08:12 1992 K. Richard Pixley (rich@cygnus.com)
* Makefile.in, configure.in: removed references to gdbm.
Tue Apr 7 16:48:20 1992 Per Bothner (bothner@cygnus.com)
* config.sub: Don't canonicalize os value
newsos* to bsd (readline needs to check for newsos).
(This fix was earlier made Jan 31, but got re-broken.)
Mon Apr 6 14:34:08 1992 Stu Grossman (grossman at cygnus.com)
* configure.in: sco is an os, not a vendor!
* configure: Quote $( better. Keep various shells happy.
Tue Mar 31 16:32:57 1992 K. Richard Pixley (rich@cygnus.com)
* Makefile.in: eliminate stamp-files.
Mon Mar 30 22:20:23 1992 K. Richard Pixley (rich@cygnus.com)
* Makefile.in: add send_pr. remove "force" from .stmp-gprof rule.
Supress echoing of all the "if [ -d ... $(MAKE)" lines.
Wed Mar 25 15:20:04 1992 Stu Grossman (grossman@cygnus.com)
* config.sub: fix iris/iris3.
Wed Mar 25 10:34:19 1992 K. Richard Pixley (rich@cygnus.com)
* configure: re-add -rm.
Tue Mar 24 23:50:16 1992 K. Richard Pixley (rich@cygnus.com)
* Maskefile.in: add .stmp-rcs to all.
* configure.in: remove gas from rs6000 build, use aix host fragment.
Mon Mar 23 19:43:35 1992 K. Richard Pixley (rich@cygnus.com)
* configure: pass down site_option during recursion.
Thu Mar 19 16:49:36 1992 Stu Grossman (grossman at cygnus.com)
* Makefile.in (all.cross): Add .stmp-bfd .stmp-readline.
Wed Mar 18 15:29:33 1992 Mike Stump (mrs@cygnus.com)
* configure: Change exec_prefix so that it really defaults to prefix.
Sat Mar 14 17:20:38 1992 Fred Fish (fnf@cygnus.com)
* Makefile.in, configure.in: Add support for mmalloc library.
Fri Mar 13 18:44:18 1992 K. Richard Pixley (rich@cygnus.com)
* Makefile.in: add stmp dependencies for a few more things.
Thu Mar 12 04:56:24 1992 K. Richard Pixley (rich@cygnus.com)
* configure: adjusted error message on objdir/srcdir configure
collision, per john's suggestion.
* Makefile.in: add libiberty stmp to all and all.cross.
Wed Mar 11 02:07:52 1992 K. Richard Pixley (rich@cygnus.com)
* Makefile.in: remove force dependencies, add grep to all.
Tue Mar 10 21:49:18 1992 K. Richard Pixley (rich@mars.cygnus.com)
* Makefile.in: drop flex. make stamp files work.
* configure: added test for conflicting configuration in srcdir,
remove trailing slashes from srcdir. Otherwise emacs gdb mode
gets cranky. use relative paths for configure and srcdir
whenever possible. Send some error messages to stderr that were
going to stdout.
Tue Mar 10 18:01:55 1992 Per Bothner (bothner@cygnus.com)
* Makefile.in: Fix libg++ rule to check for gcc directory
before using gcc/gcc. Also pass XTRAFLAGS.
Thu Mar 5 21:45:07 1992 K. Richard Pixley (rich@sendai)
* Makefile.in: added stmp-files so that directories aren't polled
when they are already built.
* configure.texi: fixed a node pointer problem.
Thu Mar 5 12:05:58 1992 Stu Grossman (grossman at cygnus.com)
* config.sub configure.in config/.Sanitize config/mh-irix4
gdb/.Sanitize gdb/configure.in gdb/mips-tdep.c gdb/mipsread.c
gdb/procfs.c gdb/signame.h gdb/tm-irix3.h gdb/tm-mips.h
gdb/xm-irix4.h gdb/config/.Sanitize gdb/config/mt-irix3
gdb/config/mh-irix4 texinfo/configure.in: Port to SGI Irix-4.x.
Wed Mar 4 02:57:46 1992 K. Richard Pixley (rich@rtl.cygnus.com)
* configure: -recurring becomes -silent. corrected help message
for -site= option.
* Makefile.in: mkdir $(exec_prefix) and $(tooldir).
Tue Mar 3 14:51:21 1992 K. Richard Pixley (rich@rtl.cygnus.com)
* configure: when building Makefile for crosses, replace
tooldir and program_prefix. default srcdir from location of
config.sub. remove "for host in hosts" and "for target in
targets" loops.
Wed Feb 26 19:48:25 1992 K. Richard Pixley (rich@rtl.cygnus.com)
* Makefile.in: Do not pass bindir or mandir to cvs.
Wed Feb 26 18:04:40 1992 K. Richard Pixley (rich@cygnus.com)
* Makefile.in, configure.in: removed traces of namesubdir,
-subdirs, $(subdir), $(unsubdir), some rcs triggers. Forced
copyrights to '92, changed some from Cygnus to FSF.
* configure.texi: remove most references to multiple hosts,
multiple targets, subdirs, etc.
* configure.man: removed rcsid. reference config.sub not
config.subr.
* Makefile.in: mkdir $(infodir) on install-info.
Wed Feb 19 15:41:13 1992 John Gilmore (gnu at cygnus.com)
* configure.texi: Explain better about .gdbinit and about
the environment that configure.in sections run in.
Fri Feb 7 07:55:00 1992 John Gilmore (gnu at cygnus.com)
* configure.in: Ultrix is only a decstation if it's a MIPS.
Fri Jan 31 21:54:51 1992 John Gilmore (gnu at cygnus.com)
* README: DOC.configure => cfg-paper.texi.
Fri Jan 31 21:48:18 1992 Stu Grossman (grossman at cygnus.com)
* config.sub (near case $os): Don't convert newsos* to bsd!
Fri Jan 31 02:27:32 1992 John Gilmore (gnu at cygnus.com)
* Makefile.in: Reinstall change from gdb-4.3 that reduces
the number of copies of COPYING that go into the GDB tar file.
Thu Jan 30 16:17:30 1992 Stu Grossman (grossman at cygnus.com)
* bfd/configure.in, config/mh-sco, gdb/config/mh-i386sco,
gdb/config/mt-i386v32, gdb/configure.in, readline/configure.in:
Fix SCO configuration stuff.
Tue Jan 28 23:51:07 1992 Per Bothner (bothner at cygnus.com)
* Makefile.in: For libg++, make sure the -I pointing
to the gcc directory goes *after* all the libg++-local -I flags.
Also, move just-gcc dependency from just-libg++ to all-libg++.
Tue Jan 28 12:56:24 1992 Stu Grossman (grossman at cygnus.com)
* configure: Change -x to -f to keep Ultrix /bin/test happy.
Sat Jan 18 17:45:11 1992 Stu Grossman (grossman at cygnus.com)
* Makefile.in (make-gdb.tar.Z): Remove texinfo targets.
Sat Jan 18 17:03:21 1992 Fred Fish (fnf at cygnus.com)
* config.sub: Add stratus configuration frags. Also
submitted to FSF.
Sat Jan 18 15:35:29 1992 Stu Grossman (grossman at cygnus.com)
* Makefile.in (DEV_SUPPORT): add configure.man.
* config.sub(Decode manufacturer-specific): add -none*.
Fri Jan 17 17:58:05 1992 Stu Grossman (grossman at cygnus.com)
* Makefile.in: remove form feeds to make Sun's make happy.
(DEVO_SUPPORT): DOC.configure => cfg-paper.texi.
Sat Jan 4 16:11:44 1992 John Gilmore (gnu at cygnus.com)
* Makefile.in (AR_FLAGS): Make quieter.
Thu Jan 2 22:57:12 1992 John Gilmore (gnu at cygnus.com)
* configure.in: Add libg++.
* configure: When verbose, don't output the command line at each
level; it will be unremarkably the same as the previous version,
which will be the same as what the user typed.
Fri Dec 27 16:26:47 1991 K. Richard Pixley (rich at cygnus.com)
* configure.in, Makefile.in: fix clean-info, add flex. add
fileutils.
* configure: be less sensitive to spaces in Makefile.in. Do not
look for sources in "..". Doing so breaks subdirectories that
might have their own configure. If a subdir has it's own
configure script, use it.
Thu Dec 26 16:30:26 1991 K. Richard Pixley (rich at cygnus.com)
* cfg-paper.texi: some changes suggested by rms.
Thu Dec 26 10:13:36 1991 Fred Fish (fnf at cygnus.com)
* config.sub: Merge in some small additions from the FSF version,
taken from the gcc distribution, to bring the Cygnus and FSF
versions into closer sync.
Fri Dec 20 11:34:18 1991 Fred Fish (fnf at cygnus.com)
* configure.in: Changed svr4 references to sysv4.
Thu Dec 19 15:54:29 1991 K. Richard Pixley (rich at cygnus.com)
* configure: added -V for version number option.
Wed Dec 18 15:39:34 1991 K. Richard Pixley (rich at cygnus.com)
* DOC.configure, cfg-paper.texi: revised, updated, and texinfo'd.
renamed from DOC.configure to cfg-paper.texi.
Mon Dec 16 23:05:19 1991 K. Richard Pixley (rich at rtl.cygnus.com)
* configure, config.subr, config.sub: config.subr is now
config.sub again.
Fri Dec 13 01:17:06 1991 K. Richard Pixley (rich at cygnus.com)
* configure.texi: new file, in progress.
* Makefile.in: build info file and install the man page for
configure.
* configure.man: new file, first cut.
* configure: find config.subr again now that configuration "none"
has gone. removed all traces of the -ansi option. removed all
traces of the -languages option.
* config.subr: resync from rms.
Wed Dec 11 22:25:20 1991 K. Richard Pixley (rich at rtl.cygnus.com)
* configure, config.sub, config.subr: merge config.sub into
config.subr, call the result config.subr, remove config.sub, use
config.subr.
* Makefile.in: revised install for dir.info.
Tue Dec 10 00:04:35 1991 K. Richard Pixley (rich at rtl.cygnus.com)
* configure.in: add decstation host makefile frag.
* Makefile.in: BISON now bison -y again. also install-gcc on
install. clean-gdbm on clean. infodir belongs in datadir.
Make directories for info install. Build dir.info here then
install it.
Mon Dec 9 16:48:33 1991 K. Richard Pixley (rich at rtl.cygnus.com)
* Makefile.in: fix for bad directory tests.
Sat Dec 7 00:17:01 1991 K. Richard Pixley (rich at rtl.cygnus.com)
* configure: \{1,2\} appears to be a sysv'ism. Use a different
regexp. -srcdir relative was being handled incorrectly.
* Makefile.in: unwrapped some for loops so that parallel makes
work again and so one can focus one's attention on a particular
package.
Fri Dec 6 00:22:08 1991 K. Richard Pixley (rich at rtl.cygnus.com)
* configure: added PWD as a stand in for `pwd` (for speed). use
elif wherever possible. make -srcdir work without -objdir.
-objdir= commented out.
Thu Dec 5 22:46:52 1991 K. Richard Pixley (rich at rtl.cygnus.com)
* configure: +options become --options. -subdirs commented out.
added -host, -datadir. Renamed -destdir to -prefix. Comment in
Makefile now at top of generated Makefile. Removed cvs log
entries. added -srcdir. create .gdbinit only if there is one
in ${srcdir}.
* Makefile.in: idestdir and ddestdir go away. Added copyrights
and shift gpl to v2. Added ChangeLog if it didn't exist. docdir
and mandir now keyed off datadir by default.
Fri Nov 22 07:38:11 1991 K. Richard Pixley (rich at rtl.cygnus.com)
* Freshly created ChangeLog.