binutils-gdb/gas/ChangeLog
Maciej W. Rozycki 6d9dabbbc6 testsuite: Support filtering targets by TCL procedure in `run_dump_test'
Implement a more complex way of selecting targets to include or exclude
with `run_dump_test' cases, by extending the syntax for the `target',
`not-target', `skip' and `not-skip' options (with the binutils and GAS
test suites) and the `target', `alltargets' and `notarget' options (with
the LD test suite) to also accept a name of a TCL procedure instead of a
target triplet glob matching expression.  The result, 1 or 0, of the
procedure determines whether the test is to be run or not.  This mimics
and expands `dg-require-effective-target' from the GCC test suite.

Names of TCL procedures are supplied in square brackets `[]' as with TCL
procedure calls, observing that target triplet glob matching expressions
do not normally start and end with matching square brackets both at a
time.  Arguments for procedures are allowed if required.

Having a way to specify a complex condition for a `run_dump_test' case
to run has the advantage of keeping it local within the test case itself
where tool options related to the check might be also present, removing
the need to wrap `run_dump_test' calls into an `if' block whose only
reason is to do a feature check, and ultimately lets one have the test
reported as UNSUPPORTED automagically if required (not currently
supported by the `run_dump_test' options used for LD).

	binutils/
	* testsuite/lib/binutils-common.exp (match_target): New procedure.
	* testsuite/lib/utils-lib.exp (run_dump_test): Use it in place
	of `istarget' for matching with `target', `not-target', `skip'
	and `not-skip' options.

	gas/
	* testsuite/lib/gas-defs.exp (run_dump_test): Use `match_target'
	in place of `istarget' for matching with `target', `not-target',
	`skip' and `not-skip' options.

	ld/
	* testsuite/lib/ld-lib.exp (run_dump_test): Use `match_target'
	in place of `istarget' for matching with `target', `alltargets'
	and `notarget' options.
2018-04-27 15:25:20 +01:00

1997 lines
73 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

2018-04-27 Maciej W. Rozycki <macro@mips.com>
* testsuite/lib/gas-defs.exp (run_dump_test): Use `match_target'
in place of `istarget' for matching with `target', `not-target',
`skip' and `not-skip' options.
2018-04-26 Nick Clifton <nickc@redhat.com>
* as.c (flag_generate_build_notes): New variable.
(show_usage): Add entry for --generate-missing-build-notes.
(parse_args): Parse --generate-missing-build-notes.
* as.h: Export flag_generate_build_notes.
* symbols.c (save_symbol_name): Ensure that the name parameter is
not NULL.
* write.c (create_obj_attrs_section): Reformat.
(create_note_reloc): New function - creates a relocation for a
field in a GNU Build attribute note.
(maybe_generate_build_notes): New function - created GNU Build
attribute notes if none are present in the output file.
(write_object_file): Call maybe_generate_build_notes.
* configure.ac (--enable-generate-build-notes): New option.
* NEWS: Announce the new feature.
* doc/as.textinfo: Document the new option.
* config.in: Regenerate.
* configure: Regenerate.
2018-04-26 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (check_VecOperands): Add AVX512VL check. Set
.baseindex.
(match_template): Don't set suffix_check when Intel syntax and
broadcast. Make check_register a per-operand bitmap.
2018-04-26 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (optimize_encoding): Check for zeroing
masking.
* testsuite/gas/i386/optimize-1.d,
testsuite/gas/i386/optimize-4.d,
testsuite/gas/i386/optimize-5.d,
testsuite/gas/i386/x86-64-optimize-2.d,
testsuite/gas/i386/x86-64-optimize-5.d,
testsuite/gas/i386/x86-64-optimize-6.d: Adjust expectations.
2018-04-26 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (parse_real_register): Check .cpuvrex before
recording EVEX encoding. Don't check previously specified
encoding.
* testsuite/gas/i386/xmmhi32.s: Add {x,y,z}mm{16,24} cases.
* testsuite/gas/i386/xmmhi32.d: Adjust expectations.
* testsuite/gas/i386/xmmhi64.s, testsuite/gas/i386/xmmhi64.d:
New.
* testsuite/gas/i386/i386.exp: Run new test.
2018-04-26 Jan Beulich <jbeulich@suse.com>
* testsuite/gas/i386/xsave.s: Add AVX, LWP, MPX, and PKU
dependency tests.
* testsuite/gas/i386/xsave.d,
testsuite/gas/i386/xsave-intel.d: Adjust expecations.
2018-04-26 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (parse_real_register): Re-write {,x,y,z}mm
and mask register handling.
* testsuite/gas/i386/avx512f-ymm.s, testsuite/gas/i386/avx512f-ymm.d,
testsuite/gas/i386/xmmhi32.s, testsuite/gas/i386/xmmhi32.d: New.
* testsuite/gas/i386/i386.exp: Run new tests.
2018-04-26 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (parse_real_register): Check bnd<N>
registers.
* testsuite/gas/i386/bnd.s, testsuite/gas/i386/bnd.l: New.
* testsuite/gas/i386/i386.exp: Run new test.
2018-04-26 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (parse_real_register): Check FPU register
earlier.
* testsuite/gas/i386/fpu.s, testsuite/gas/i386/fpu.l,
testsuite/gas/i386/stN.s, testsuite/gas/i386/stN.l: New.
* testsuite/gas/i386/i386.exp: Run new tests.
2018-04-26 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (build_modrm_byte): Use tabs for indentation.
2018-04-26 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (build_modrm_byte): Move and fold
source/reg_slot calculations.
2018-04-26 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (build_modrm_byte): Drop .veximmext uses.
Move part of the remaining assertion.
2018-04-26 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (build_modrm_byte): Extend assertion in
vex_3_sources handling to cover more cases.
2018-04-26 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (build_modrm_byte): Drop code dealing with
.veximmext and .immext set at the same time. Drop code dealing
with .cpufma when .vexsources == VEX3SOURCES.
2018-04-25 Christophe Lyon <christophe.lyon@st.com>
Mickaël Guêné <mickael.guene@st.com>
* config/tc-arm.c (reloc_names): Add TLSGD_FDPIC, TLSLDM_FDPIC,
GOTTPOFF_FDIC relocations.
(md_apply_fix): Handle the new TLS FDPIC relocations.
(tc_gen_reloc): Likewise.
(arm_fix_adjustable): Likewise.
2018-04-25 Christophe Lyon <christophe.lyon@st.com>
Mickaël Guêné <mickael.guene@st.com>
* config/tc-arm.c (reloc_names): Add gotfuncdesc, gotofffuncdesc,
funcdesc.
(md_apply_fix): Support the new relocations.
(tc_gen_reloc): Likewise.
* testsuite/gas/arm/reloc-fdpic.d: New.
* testsuite/gas/arm/reloc-fdpic.s: New.
2018-04-25 Christophe Lyon <christophe.lyon@st.com>
Mickaël Guêné <mickael.guene@st.com>
* config/tc-arm.c (arm_fdpic): New.
(elf32_arm_target_format): Support FDPIC.
(OPTION_FDPIC): New.
(md_longopts): Support FDPIC.
(md_parse_option): Likewise.
(md_show_usage): Likewise.
2018-04-25 Tamar Christina <tamar.christina@arm.com>
* testsuite/gas/aarch64/rdma.s: Test for larger register numbers.
* testsuite/gas/aarch64/rdma.d: Update results.
* testsuite/gas/aarch64/rdma-directive.d: Likewise.
2018-04-25 Nick Clifton <nickc@redhat.com>
* po/es.po: Updated Spanish translation.
2018-04-25 Alan Modra <amodra@gmail.com>
* Makefile.am: Remove arm-aout and arm-coff support.
* config/tc-arm.c: Likewise.
* config/tc-arm.h: Likewise.
* configure.tgt: Likewise.
* testsuite/gas/aarch64/codealign.d: Likewise.
* testsuite/gas/aarch64/mapping.d: Likewise.
* testsuite/gas/aarch64/mapping2.d: Likewise.
* testsuite/gas/arm/adds-thumb1-reloc-local-armv7-m.d: Likewise.
* testsuite/gas/arm/adds-thumb1-reloc-local.d: Likewise.
* testsuite/gas/arm/addsw-bad.d: Likewise.
* testsuite/gas/arm/align.d: Likewise.
* testsuite/gas/arm/align64.d: Likewise.
* testsuite/gas/arm/arch7.d: Likewise.
* testsuite/gas/arm/arch7a-mp.d: Likewise.
* testsuite/gas/arm/arch7em.d: Likewise.
* testsuite/gas/arm/archv8m-main-dsp-5.d: Likewise.
* testsuite/gas/arm/arm-it-auto-2.d: Likewise.
* testsuite/gas/arm/arm-it-auto-3.d: Likewise.
* testsuite/gas/arm/arm-it-auto.d: Likewise.
* testsuite/gas/arm/arm-it-bad-2.d: Likewise.
* testsuite/gas/arm/arm-it.d: Likewise.
* testsuite/gas/arm/armv7e-m+fpv5-d16.d: Likewise.
* testsuite/gas/arm/armv7e-m+fpv5-sp-d16.d: Likewise.
* testsuite/gas/arm/armv8-2-fp16-scalar-thumb.d: Likewise.
* testsuite/gas/arm/armv8-2-fp16-scalar.d: Likewise.
* testsuite/gas/arm/armv8-2-fp16-simd-thumb.d: Likewise.
* testsuite/gas/arm/armv8-2-fp16-simd.d: Likewise.
* testsuite/gas/arm/armv8-a+crypto.d: Likewise.
* testsuite/gas/arm/armv8-a+fp.d: Likewise.
* testsuite/gas/arm/armv8-a+ras.d: Likewise.
* testsuite/gas/arm/armv8-a+rdma-warning.d: Likewise.
* testsuite/gas/arm/armv8-a+rdma.d: Likewise.
* testsuite/gas/arm/armv8-a+simd.d: Likewise.
* testsuite/gas/arm/armv8-a-barrier-thumb.d: Likewise.
* testsuite/gas/arm/armv8-r+fp.d: Likewise.
* testsuite/gas/arm/armv8-r+simd.d: Likewise.
* testsuite/gas/arm/armv8-r-barrier-thumb.d: Likewise.
* testsuite/gas/arm/armv8_1-a+simd.d: Likewise.
* testsuite/gas/arm/armv8_2+rdma.d: Likewise.
* testsuite/gas/arm/armv8_2-a.d: Likewise.
* testsuite/gas/arm/armv8_3-a-fp.d: Likewise.
* testsuite/gas/arm/armv8_3-a-simd.d: Likewise.
* testsuite/gas/arm/armv8a-automatic-hlt.d: Likewise.
* testsuite/gas/arm/armv8a-automatic-lda.d: Likewise.
* testsuite/gas/arm/attr-syntax.d: Likewise.
* testsuite/gas/arm/automatic-bw.d: Likewise.
* testsuite/gas/arm/automatic-cbz.d: Likewise.
* testsuite/gas/arm/automatic-clrex.d: Likewise.
* testsuite/gas/arm/automatic-lda.d: Likewise.
* testsuite/gas/arm/automatic-ldaex.d: Likewise.
* testsuite/gas/arm/automatic-ldaexb.d: Likewise.
* testsuite/gas/arm/automatic-ldrex.d: Likewise.
* testsuite/gas/arm/automatic-ldrexd.d: Likewise.
* testsuite/gas/arm/automatic-movw.d: Likewise.
* testsuite/gas/arm/automatic-sdiv.d: Likewise.
* testsuite/gas/arm/automatic-strexb.d: Likewise.
* testsuite/gas/arm/barrier-bad-thumb.d: Likewise.
* testsuite/gas/arm/barrier-bad.d: Likewise.
* testsuite/gas/arm/barrier-thumb.d: Likewise.
* testsuite/gas/arm/barrier.d: Likewise.
* testsuite/gas/arm/bignum1.d: Likewise.
* testsuite/gas/arm/blx-bad.d: Likewise.
* testsuite/gas/arm/blx-bl-convert.d: Likewise.
* testsuite/gas/arm/blx-local.s: Likewise.
* testsuite/gas/arm/crc32-armv8-a-bad.d: Likewise.
* testsuite/gas/arm/crc32-armv8-a.d: Likewise.
* testsuite/gas/arm/crc32-armv8-r-bad.d: Likewise.
* testsuite/gas/arm/crc32-armv8-r.d: Likewise.
* testsuite/gas/arm/dis-data.d: Likewise.
* testsuite/gas/arm/dis-data2.d: Likewise.
* testsuite/gas/arm/dis-data3.d: Likewise.
* testsuite/gas/arm/eabi_attr_1.d: Likewise.
* testsuite/gas/arm/fp-save.d: Likewise.
* testsuite/gas/arm/group-reloc-alu-encoding-bad.d: Likewise.
* testsuite/gas/arm/group-reloc-alu-parsing-bad.d: Likewise.
* testsuite/gas/arm/group-reloc-alu.d: Likewise.
* testsuite/gas/arm/group-reloc-ldc-encoding-bad.d: Likewise.
* testsuite/gas/arm/group-reloc-ldc-parsing-bad.d: Likewise.
* testsuite/gas/arm/group-reloc-ldc.d: Likewise.
* testsuite/gas/arm/group-reloc-ldr-encoding-bad.d: Likewise.
* testsuite/gas/arm/group-reloc-ldr-parsing-bad.d: Likewise.
* testsuite/gas/arm/group-reloc-ldr.d: Likewise.
* testsuite/gas/arm/group-reloc-ldrs-encoding-bad.d: Likewise.
* testsuite/gas/arm/group-reloc-ldrs-parsing-bad.d: Likewise.
* testsuite/gas/arm/group-reloc-ldrs.d: Likewise.
* testsuite/gas/arm/insn-error-a.d: Likewise.
* testsuite/gas/arm/insn-error-t.d: Likewise.
* testsuite/gas/arm/inst-po-2.d: Likewise.
* testsuite/gas/arm/inst-po-3.d: Likewise.
* testsuite/gas/arm/inst-po-be.d: Likewise.
* testsuite/gas/arm/inst-po.d: Likewise.
* testsuite/gas/arm/ldconst.d: Likewise.
* testsuite/gas/arm/ldgesb-bad.d: Likewise.
* testsuite/gas/arm/ldgesh-bad.d: Likewise.
* testsuite/gas/arm/ldst-offset0.d: Likewise.
* testsuite/gas/arm/local_function.d: Likewise.
* testsuite/gas/arm/local_label_coff.d: Likewise.
* testsuite/gas/arm/local_label_elf.d: Likewise.
* testsuite/gas/arm/mapping.d: Likewise.
* testsuite/gas/arm/mapping2.d: Likewise.
* testsuite/gas/arm/mapping3.d: Likewise.
* testsuite/gas/arm/mapping4.d: Likewise.
* testsuite/gas/arm/mapshort-elf.d: Likewise.
* testsuite/gas/arm/mask_1-armv8-a.d: Likewise.
* testsuite/gas/arm/mask_1-armv8-r.d: Likewise.
* testsuite/gas/arm/movs-thumb1-reloc-local-armv7-m.d: Likewise.
* testsuite/gas/arm/movs-thumb1-reloc-local.d: Likewise.
* testsuite/gas/arm/movw-local.d: Likewise.
* testsuite/gas/arm/mrs-msr-thumb-v6t2.d: Likewise.
* testsuite/gas/arm/mrs-msr-thumb-v7-m.d: Likewise.
* testsuite/gas/arm/mrs-msr-thumb-v7e-m.d: Likewise.
* testsuite/gas/arm/msr-imm-bad.d: Likewise.
* testsuite/gas/arm/msr-reg-bad.d: Likewise.
* testsuite/gas/arm/msr-reg-thumb.d: Likewise.
* testsuite/gas/arm/nomapping.d: Likewise.
* testsuite/gas/arm/nops.d: Likewise.
* testsuite/gas/arm/pic.d: Likewise.
* testsuite/gas/arm/pinsn.d: Likewise.
* testsuite/gas/arm/plt-1.d: Likewise.
* testsuite/gas/arm/pr21458.d: Likewise.
* testsuite/gas/arm/pr9722.d: Likewise.
* testsuite/gas/arm/strex-t.d: Likewise.
* testsuite/gas/arm/t2-branch-global.d: Likewise.
* testsuite/gas/arm/target-reloc-1.d: Likewise.
* testsuite/gas/arm/thumb-b-bad.d: Likewise.
* testsuite/gas/arm/thumb-w-bad.d: Likewise.
* testsuite/gas/arm/thumb-w-good.d: Likewise.
* testsuite/gas/arm/thumb.d: Likewise.
* testsuite/gas/arm/thumb2_it.d: Likewise.
* testsuite/gas/arm/thumb2_it_auto.d: Likewise.
* testsuite/gas/arm/thumb2_it_search.d: Likewise.
* testsuite/gas/arm/thumb2_ldmstm.d: Likewise.
* testsuite/gas/arm/thumb2_ldr_immediate_armv6.d: Likewise.
* testsuite/gas/arm/thumb2_ldr_immediate_armv6t2.d: Likewise.
* testsuite/gas/arm/thumb2_ldr_immediate_highregs_armv6t2.d: Likewise.
* testsuite/gas/arm/thumb2_pool.d: Likewise.
* testsuite/gas/arm/thumb2_vpool.d: Likewise.
* testsuite/gas/arm/thumb2_vpool_be.d: Likewise.
* testsuite/gas/arm/thumb32.d: Likewise.
* testsuite/gas/arm/thumbver.d: Likewise.
* testsuite/gas/arm/tls.d: Likewise.
* testsuite/gas/arm/tls_vxworks.d: Likewise.
* testsuite/gas/arm/undefined.d: Likewise.
* testsuite/gas/arm/undefined_coff.d: Likewise.
* testsuite/gas/arm/unwind.d: Likewise.
* testsuite/gas/arm/v4bx.d: Likewise.
* testsuite/gas/arm/vcmp-noprefix-imm.d: Likewise.
* testsuite/gas/arm/vcvt-bad.d: Likewise.
* testsuite/gas/arm/vfma1.d: Likewise.
* testsuite/gas/arm/vldconst.d: Likewise.
* testsuite/gas/arm/vldconst_be.d: Likewise.
* testsuite/gas/arm/vldm-arm.d: Likewise.
* testsuite/gas/arm/vldr.d: Likewise.
* testsuite/gas/arm/weakdef-1.d: Likewise.
* testsuite/gas/arm/weakdef-2.d: Likewise.
* config/te-riscix.h: Delete.
* Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
2018-04-23 Alan Modra <amodra@gmail.com>
* stabs.c (generate_asm_file): Use memcpy rather than strncpy.
Remove call to strlen inside loop.
* config/tc-cr16.c (getreg_image): Warning fix.
* config/tc-crx.c (getreg_image): Warning fix.
2018-04-20 Kito Cheng <kito.cheng@gmail.com>
* config/tc-riscv.c (options): Add OPTION_RELAX and
OPTION_NO_RELAX.
(md_longopts): New option -mrelax and -mno-relax.
(md_parse_option): Handle -mrelax and -mno-relax.
* doc/c-riscv.texi: Document for -mrelax and -mno-relax.
* testsuite/gas/riscv/no-relax-reloc.d: New.
* testsuite/gas/riscv/no-relax-reloc.s: New.
* testsuite/gas/riscv/relax-reloc.d: New.
* testsuite/gas/riscv/relax-reloc.s: New.
2018-04-20 Nick Clifton <nickc@redhat.com>
* po/es.po: Updated Spanish translation.
2018-04-18 Alan Modra <amodra@gmail.com>
* Makefile.am: Remove support for assorted i386 aout and coff targets.
* config/obj-elf.c: Likewise.
* config/tc-i386.h: Likewise.
* configure.ac: Likewise.
* configure.tgt: Likewise.
* config/te-dynix.h: Delete.
* config/te-i386aix.h: Delete.
* config/te-mach.h: Delete.
* Makefile.in: Regenerate.
* config.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
2018-04-18 Alan Modra <amodra@gmail.com>
* configure.tgt: Remove *-*-bsd* entry.
2018-04-17 Andrew Sadek <andrew.sadek.se@gmail.com>
Microblaze Target: PIC data text relative
* gas/config/tc-microblaze.c (Handle new relocs directives in
assembler): Handle new relocs from compiler output.
(imm_types): add new imm types for data text relative addressing
TEXT_OFFSET, TEXT_PC_OFFSET
(md_convert_frag): conversion for BFD_RELOC_MICROBLAZE_64_TEXTPCREL,
BFD_RELOC_MICROBLAZE_64_TEXTPCREL
(md_apply_fix): apply fix for BFD_RELOC_MICROBLAZE_64_TEXTPCREL,
BFD_RELOC_MICROBLAZE_64_TEXTPCREL
(md_estimate_size_before_relax): estimate size for
BFD_RELOC_MICROBLAZE_64_TEXTPCREL,
BFD_RELOC_MICROBLAZE_64_TEXTPCREL
(tc_gen_reloc): generate relocations for
BFD_RELOC_MICROBLAZE_64_TEXTPCREL,
BFD_RELOC_MICROBLAZE_64_TEXTPCREL
2018-04-17 Igor Tsimbalist <igor.v.tsimbalist@intel.com>
* testsuite/gas/i386/nops.s: Revert back deleted lines and
change encoding to 0x0f1c /1 to map to NOP.
* testsuite/gas/i386/x86-64-nops.s: Likewise.
* testsuite/gas/i386/nops.d: Likewise.
* testsuite/gas/i386/x86-64-nops.d: Likewise.
* testsuite/gas/i386/ilp32/x86-64-nops.d: Likewis.
2018-04-17 Igor Tsimbalist <igor.v.tsimbalist@intel.com>
* config/tc-i386.c (cpu_arch): Add .cldemote.
* doc/c-i386.texi: Document cldemote/.cldemote.
* testsuite/gas/i386/cldemote-intel.d: New.
* testsuite/gas/i386/cldemote.d: Likewise.
* testsuite/gas/i386/cldemote.s: Likewise.
* testsuite/gas/i386/i386.exp: Run new tests.
* testsuite/gas/i386/x86-64-cldemote-intel.d: New.
* testsuite/gas/i386/x86-64-cldemote.d: Likewise.
* testsuite/gas/i386/x86-64-cldemote.s: Likewise.
* testsuite/gas/i386/ilp32/x86-64-nops.d: Remove 0x0f1c
NOP encoding that maps to cldemote.
* testsuite/gas/i386/nops.d: Likewise.
* testsuite/gas/i386/nops.s: Likewise.
* testsuite/gas/i386/x86-64-nops.d: Likewise.
* testsuite/gas/i386/x86-64-nops.s: Likewise.
2018-04-16 Nick Clifton <nickc@redhat.com>
PR 23054
* cond.c (s_ifsef): Replace use of obstack_copy with obstack_alloc
followed by memcpy.
(s_if, s_ifb, s_ifc, s_ifeqs): Likewise.
* obj-elf.c (elf_adjust_symtab): Check for local symbols before
attempting to dereference the sy_next field of a symbol.
* stabs.c (get_stab_string_offset): Fail if there is no string
following the stab directive.
2018-04-16 Alan Modra <amodra@gmail.com>
* Makefile.am: Remove arm-epoc-pe support.
* config/tc-arm.h: Likewise.
* configure.tgt: Likewise.
* testsuite/gas/all/gas.exp: Likewise.
* testsuite/gas/arm/local_label_coff.d: Likewise.
* testsuite/gas/arm/undefined.d: Likewise.
* testsuite/gas/arm/undefined_coff.d: Likewise.
* config/te-epoc-pe.h: Delete.
* Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
2018-04-16 Alan Modra <amodra@gmail.com>
* Makefile.am: Remove sparc-aout and sparc-coff support.
* config/obj-coff.h: Likewise.
* config/tc-sparc.c: Likewise.
* config/tc-sparc.h: Likewise.
* configure.tgt: Likewise.
* config/te-sparcaout.h: Delete.
* testsuite/gas/sun4/addend.d: Delete.
* testsuite/gas/sun4/addend.exp: Delete.
* testsuite/gas/sun4/addend.s: Delete.
* Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
2018-04-16 Alan Modra <amodra@gmail.com>
* Makefile.am: Remove m68k-aout and m68k-coff support.
* config/tc-m68k.c: Likewise.
* config/tc-m68k.h: Likewise.
* configure.ac: Likewise.
* configure.tgt: Likewise.
* testsuite/gas/all/weakref1u.d: Likewise.
* testsuite/gas/m68k/all.exp: Likewise.
* testsuite/gas/m68k/br-isaa.d: Likewise.
* testsuite/gas/m68k/br-isab.d: Likewise.
* testsuite/gas/m68k/br-isac.d: Likewise.
* config/te-psos.h: Delete.
* config/te-sun3.h: Delete.
* testsuite/gas/m68k-coff/gas.exp: Delete.
* testsuite/gas/m68k-coff/p2389.s: Delete.
* testsuite/gas/m68k-coff/p2389a.s: Delete.
* testsuite/gas/m68k-coff/p2430.s: Delete.
* testsuite/gas/m68k-coff/p2430a.s: Delete.
* testsuite/gas/m68k-coff/t1.s: Delete.
* testsuite/gas/m68k/p3041.d: Delete.
* testsuite/gas/m68k/p3041.s: Delete.
* testsuite/gas/m68k/p3041data.d: Delete.
* testsuite/gas/m68k/p3041data.s: Delete.
* testsuite/gas/m68k/p3041pcrel.d: Delete.
* testsuite/gas/m68k/p3041pcrel.s: Delete.
* testsuite/gas/m68k/t2.d: Delete.
* Makefile.in: Regenerate.
* config.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
2018-04-16 Alan Modra <amodra@gmail.com>
* Makefile.am: Remove sh5 and sh64 support.
* config/tc-sh.c: Likewise.
* configure.tgt: Likewise.
* doc/Makefile.am: Likewise.
* doc/as.texinfo: Likewise.
* testsuite/gas/cfi/cfi.exp: Likewise.
* testsuite/gas/sh/basic.exp: Likewise.
* config/tc-sh64.c: Delete.
* config/tc-sh64.h: Delete.
* doc/c-sh64.texi: Delete.
* testsuite/gas/sh/sh64/abi-32.d: Delete.
* testsuite/gas/sh/sh64/abi-32.s: Delete.
* testsuite/gas/sh/sh64/abi-64.d: Delete.
* testsuite/gas/sh/sh64/abi-64.s: Delete.
* testsuite/gas/sh/sh64/basic-1.d: Delete.
* testsuite/gas/sh/sh64/basic-1.s: Delete.
* testsuite/gas/sh/sh64/case-1.d: Delete.
* testsuite/gas/sh/sh64/case-1.s: Delete.
* testsuite/gas/sh/sh64/case-noexp-1.d: Delete.
* testsuite/gas/sh/sh64/crange1-1.d: Delete.
* testsuite/gas/sh/sh64/crange1-2.d: Delete.
* testsuite/gas/sh/sh64/crange1.s: Delete.
* testsuite/gas/sh/sh64/crange2-1.d: Delete.
* testsuite/gas/sh/sh64/crange2-2.d: Delete.
* testsuite/gas/sh/sh64/crange2-noexp-1.d: Delete.
* testsuite/gas/sh/sh64/crange2.s: Delete.
* testsuite/gas/sh/sh64/crange3-1.d: Delete.
* testsuite/gas/sh/sh64/crange3.s: Delete.
* testsuite/gas/sh/sh64/crange4-1.d: Delete.
* testsuite/gas/sh/sh64/crange4.s: Delete.
* testsuite/gas/sh/sh64/crange5-1.d: Delete.
* testsuite/gas/sh/sh64/crange5.s: Delete.
* testsuite/gas/sh/sh64/creg-1.d: Delete.
* testsuite/gas/sh/sh64/creg-1.s: Delete.
* testsuite/gas/sh/sh64/creg-2.d: Delete.
* testsuite/gas/sh/sh64/creg-2.s: Delete.
* testsuite/gas/sh/sh64/datal-1.s: Delete.
* testsuite/gas/sh/sh64/datal-2.d: Delete.
* testsuite/gas/sh/sh64/datal-2.s: Delete.
* testsuite/gas/sh/sh64/datal-3.s: Delete.
* testsuite/gas/sh/sh64/datal32-1.d: Delete.
* testsuite/gas/sh/sh64/datal32-3.d: Delete.
* testsuite/gas/sh/sh64/datal64-1.d: Delete.
* testsuite/gas/sh/sh64/datal64-3.d: Delete.
* testsuite/gas/sh/sh64/eh-1.d: Delete.
* testsuite/gas/sh/sh64/eh-1.s: Delete.
* testsuite/gas/sh/sh64/endian-1.d: Delete.
* testsuite/gas/sh/sh64/endian-1.s: Delete.
* testsuite/gas/sh/sh64/endian-2.d: Delete.
* testsuite/gas/sh/sh64/endian-2.s: Delete.
* testsuite/gas/sh/sh64/err-1.s: Delete.
* testsuite/gas/sh/sh64/err-2.s: Delete.
* testsuite/gas/sh/sh64/err-3.s: Delete.
* testsuite/gas/sh/sh64/err-4.s: Delete.
* testsuite/gas/sh/sh64/err-abi-32.s: Delete.
* testsuite/gas/sh/sh64/err-abi-64.s: Delete.
* testsuite/gas/sh/sh64/err-dsp.s: Delete.
* testsuite/gas/sh/sh64/err-movi-noexp-1.s: Delete.
* testsuite/gas/sh/sh64/err-noexp-cmd1.s: Delete.
* testsuite/gas/sh/sh64/err-pt-1.s: Delete.
* testsuite/gas/sh/sh64/err-pt32-cmd1.s: Delete.
* testsuite/gas/sh/sh64/err-pt32-cmd2.s: Delete.
* testsuite/gas/sh/sh64/err-pt32-cmd3.s: Delete.
* testsuite/gas/sh/sh64/err-ptb-1.s: Delete.
* testsuite/gas/sh/sh64/err-ptb-2.s: Delete.
* testsuite/gas/sh/sh64/err.exp: Delete.
* testsuite/gas/sh/sh64/immexpr1.s: Delete.
* testsuite/gas/sh/sh64/immexpr2.s: Delete.
* testsuite/gas/sh/sh64/immexpr32-1.d: Delete.
* testsuite/gas/sh/sh64/immexpr32-2.d: Delete.
* testsuite/gas/sh/sh64/immexpr64-1.d: Delete.
* testsuite/gas/sh/sh64/immexpr64-2.d: Delete.
* testsuite/gas/sh/sh64/lineno.d: Delete.
* testsuite/gas/sh/sh64/lineno.s: Delete.
* testsuite/gas/sh/sh64/localcom-1.d: Delete.
* testsuite/gas/sh/sh64/localcom-1.s: Delete.
* testsuite/gas/sh/sh64/mix-1.d: Delete.
* testsuite/gas/sh/sh64/mix-1.s: Delete.
* testsuite/gas/sh/sh64/mix-noexp-1.d: Delete.
* testsuite/gas/sh/sh64/movi-1.s: Delete.
* testsuite/gas/sh/sh64/movi-2.s: Delete.
* testsuite/gas/sh/sh64/movi-3.d: Delete.
* testsuite/gas/sh/sh64/movi-3.s: Delete.
* testsuite/gas/sh/sh64/movi32-1.d: Delete.
* testsuite/gas/sh/sh64/movi32-2.d: Delete.
* testsuite/gas/sh/sh64/movi32-noexp-2.d: Delete.
* testsuite/gas/sh/sh64/movi64-1.d: Delete.
* testsuite/gas/sh/sh64/movi64-2.d: Delete.
* testsuite/gas/sh/sh64/movi64-2.s: Delete.
* testsuite/gas/sh/sh64/movi64-3.d: Delete.
* testsuite/gas/sh/sh64/movi64-noexp-2.d: Delete.
* testsuite/gas/sh/sh64/pt-1.d: Delete.
* testsuite/gas/sh/sh64/pt-1.s: Delete.
* testsuite/gas/sh/sh64/pt-2.s: Delete.
* testsuite/gas/sh/sh64/pt-noexp-1.d: Delete.
* testsuite/gas/sh/sh64/pt32-1.d: Delete.
* testsuite/gas/sh/sh64/pt32-noexp-2.d: Delete.
* testsuite/gas/sh/sh64/pt64-1.d: Delete.
* testsuite/gas/sh/sh64/pt64-32-1.d: Delete.
* testsuite/gas/sh/sh64/pt64-32-2.d: Delete.
* testsuite/gas/sh/sh64/pt64-noexp-2.d: Delete.
* testsuite/gas/sh/sh64/ptc-1.s: Delete.
* testsuite/gas/sh/sh64/ptc32-1.d: Delete.
* testsuite/gas/sh/sh64/ptc32-noexp-1.d: Delete.
* testsuite/gas/sh/sh64/ptc64-1.d: Delete.
* testsuite/gas/sh/sh64/ptc64-32-1.d: Delete.
* testsuite/gas/sh/sh64/ptc64-noexp-1.d: Delete.
* testsuite/gas/sh/sh64/ptext-1.s: Delete.
* testsuite/gas/sh/sh64/ptext32-1.d: Delete.
* testsuite/gas/sh/sh64/ptext32-noexp-1.d: Delete.
* testsuite/gas/sh/sh64/ptext64-1.d: Delete.
* testsuite/gas/sh/sh64/ptext64-32-1.d: Delete.
* testsuite/gas/sh/sh64/ptext64-noexp-1.d: Delete.
* testsuite/gas/sh/sh64/rel-1.s: Delete.
* testsuite/gas/sh/sh64/rel-2.s: Delete.
* testsuite/gas/sh/sh64/rel-3.s: Delete.
* testsuite/gas/sh/sh64/rel-4.s: Delete.
* testsuite/gas/sh/sh64/rel-5.s: Delete.
* testsuite/gas/sh/sh64/rel32-1.d: Delete.
* testsuite/gas/sh/sh64/rel32-2.d: Delete.
* testsuite/gas/sh/sh64/rel32-3.d: Delete.
* testsuite/gas/sh/sh64/rel32-4.d: Delete.
* testsuite/gas/sh/sh64/rel32-5.d: Delete.
* testsuite/gas/sh/sh64/rel64-1.d: Delete.
* testsuite/gas/sh/sh64/rel64-2.d: Delete.
* testsuite/gas/sh/sh64/rel64-3.d: Delete.
* testsuite/gas/sh/sh64/rel64-4.d: Delete.
* testsuite/gas/sh/sh64/rel64-5.d: Delete.
* testsuite/gas/sh/sh64/relax-1.d: Delete.
* testsuite/gas/sh/sh64/relax-1.s: Delete.
* testsuite/gas/sh/sh64/relax-2.d: Delete.
* testsuite/gas/sh/sh64/relax-2.s: Delete.
* testsuite/gas/sh/sh64/relax-3.d: Delete.
* testsuite/gas/sh/sh64/relax-3.s: Delete.
* testsuite/gas/sh/sh64/sh64.exp: Delete.
* testsuite/gas/sh/sh64/shift-1.s: Delete.
* testsuite/gas/sh/sh64/shift-2.s: Delete.
* testsuite/gas/sh/sh64/shift-3.s: Delete.
* testsuite/gas/sh/sh64/shift32-1.d: Delete.
* testsuite/gas/sh/sh64/shift32-3.d: Delete.
* testsuite/gas/sh/sh64/shift32-noexp-3.d: Delete.
* testsuite/gas/sh/sh64/shift64-1.d: Delete.
* testsuite/gas/sh/sh64/shift64-2.d: Delete.
* testsuite/gas/sh/sh64/shift64-3.d: Delete.
* testsuite/gas/sh/sh64/shift64-noexp-3.d: Delete.
* testsuite/gas/sh/sh64/syntax-1.d: Delete.
* testsuite/gas/sh/sh64/syntax-1.s: Delete.
* testsuite/gas/sh/sh64/syntax-2.d: Delete.
* testsuite/gas/sh/sh64/syntax-2.s: Delete.
* testsuite/gas/sh/sh64/ua-1.s: Delete.
* testsuite/gas/sh/sh64/ua32-1.d: Delete.
* testsuite/gas/sh/sh64/ua64-1.d: Delete.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
2018-04-16 Alan Modra <amodra@gmail.com>
* config/tc-sh.c: Remove sh-symbianelf support.
* config/tc-sh.h: Likewise.
* configure.ac: Likewise.
* configure.tgt: Likewise.
* testsuite/gas/sh/reg-prefix.d: Likewise.
* testsuite/gas/sh/sh2a-pic.d: Likewise.
* config.in: Regenerate.
* configure: Regenerate.
2018-04-16 Alan Modra <amodra@gmail.com>
* configure.ac: Remove m88k support.
* config.in: Regenerate.
* configure: Regenerate.
2018-04-16 Alan Modra <amodra@gmail.com>
* Makefile.am: Remove i370 support.
* app.c: Likewise.
* config/obj-elf.c: Likewise.
* configure.tgt: Likewise.
* doc/Makefile.am: Likewise.
* doc/as.texinfo: Likewise.
* testsuite/gas/all/gas.exp: Likewise.
* testsuite/gas/elf/warn-2.s: Likewise.
* testsuite/gas/lns/lns.exp: Likewise.
* config/tc-i370.c: Delete.
* config/tc-i370.h: Delete.
* doc/c-i370.texi: Delete.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
2018-04-16 Alan Modra <amodra@gmail.com>
* config/obj-coff.h: Remove h8500 support.
2018-04-16 Alan Modra <amodra@gmail.com>
* config/obj-coff.h: Remove h8300-coff support.
* config/tc-h8300.c: Likewise.
* config/tc-h8300.h: Likewise.
* testsuite/gas/h8300/h8300.exp: Likewise.
* testsuite/gas/h8300/branch-coff.s: Delete.
* testsuite/gas/h8300/branchh-coff.s: Delete.
* testsuite/gas/h8300/branchs-coff.s: Delete.
* testsuite/gas/h8300/ffxx1-coff.d: Delete.
* testsuite/gas/h8300/ffxx1-coff.s: Delete.
* testsuite/gas/h8300/h8300-coff.exp: Delete.
2018-04-16 Alan Modra <amodra@gmail.com>
* app.c: Remove IEEE 695 support.
* symbols.c: Likewise.
2018-04-16 Alan Modra <amodra@gmail.com>
* Makefile.am: Remove netware support.
* config/tc-i386.c: Likewise.
* configure.tgt: Likewise.
* config/te-netware.h: Delete.
* Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
2018-04-15 H.J. Lu <hongjiu.lu@intel.com>
* testsuite/gas/i386/x86-64-waitpkg.s: Add 32-bit registers
tests for tpause and umwait.
* testsuite/gas/i386/x86-64-waitpkg-intel.d: Updated.
* testsuite/gas/i386/x86-64-waitpkg.d: Likewise.
2018-04-12 John Darrington <john@darrington.wattle.id.au>
* as.c (main): Fail if the output is the same as one of the input
files.
* testsuite/gas/all/gas.exp: Test the new feature.
2018-04-12 Nick Clifton <nickc@redhat.com>
* po/es.po: Updated Spanish translation.
* po/ru.po: Updated Russian translation.
2018-04-11 Igor Tsimbalist <igor.v.tsimbalist@intel.com>
* config/tc-i386.c (cpu_arch): Add WAITPKG.
(cpu_noarch): Likewise.
* doc/c-i386.texi: Document WAITPKG.
* i386/i386.exp: Run WAITPKG tests.
* testsuite/gas/i386/waitpkg-intel.d: New test.
* testsuite/gas/i386/waitpkg.d: Likewise.
* testsuite/gas/i386/waitpkg.s: Likewise.
* testsuite/gas/i386/x86-64-waitpkg-intel.d: Likewise.
* testsuite/gas/i386/x86-64-waitpkg.d: Likewise.
* testsuite/gas/i386/x86-64-waitpkg.s: Likewise.
2018-04-11 Alan Modra <amodra@gmail.com>
* config/aout_gnu.h: Delete.
* config/tc-i860.c: Delete.
* config/tc-i860.h: Delete.
* config/tc-i960.c: Delete.
* config/tc-i960.h: Delete.
* doc/c-i860.texi: Delete.
* doc/c-i960.texi: Delete.
* testsuite/gas/i860/README.i860: Delete.
* testsuite/gas/i860/bitwise.d: Delete.
* testsuite/gas/i860/bitwise.s: Delete.
* testsuite/gas/i860/branch.d: Delete.
* testsuite/gas/i860/branch.s: Delete.
* testsuite/gas/i860/bte.d: Delete.
* testsuite/gas/i860/bte.s: Delete.
* testsuite/gas/i860/dir-align01.d: Delete.
* testsuite/gas/i860/dir-align01.s: Delete.
* testsuite/gas/i860/dir-intel01.d: Delete.
* testsuite/gas/i860/dir-intel01.s: Delete.
* testsuite/gas/i860/dir-intel02.d: Delete.
* testsuite/gas/i860/dir-intel02.s: Delete.
* testsuite/gas/i860/dir-intel03-err.l: Delete.
* testsuite/gas/i860/dir-intel03-err.s: Delete.
* testsuite/gas/i860/dual01.d: Delete.
* testsuite/gas/i860/dual01.s: Delete.
* testsuite/gas/i860/dual02-err.l: Delete.
* testsuite/gas/i860/dual02-err.s: Delete.
* testsuite/gas/i860/dual03.d: Delete.
* testsuite/gas/i860/dual03.s: Delete.
* testsuite/gas/i860/fldst01.d: Delete.
* testsuite/gas/i860/fldst01.s: Delete.
* testsuite/gas/i860/fldst02.d: Delete.
* testsuite/gas/i860/fldst02.s: Delete.
* testsuite/gas/i860/fldst03.d: Delete.
* testsuite/gas/i860/fldst03.s: Delete.
* testsuite/gas/i860/fldst04.d: Delete.
* testsuite/gas/i860/fldst04.s: Delete.
* testsuite/gas/i860/fldst05.d: Delete.
* testsuite/gas/i860/fldst05.s: Delete.
* testsuite/gas/i860/fldst06.d: Delete.
* testsuite/gas/i860/fldst06.s: Delete.
* testsuite/gas/i860/fldst07.d: Delete.
* testsuite/gas/i860/fldst07.s: Delete.
* testsuite/gas/i860/fldst08.d: Delete.
* testsuite/gas/i860/fldst08.s: Delete.
* testsuite/gas/i860/float01.d: Delete.
* testsuite/gas/i860/float01.s: Delete.
* testsuite/gas/i860/float02.d: Delete.
* testsuite/gas/i860/float02.s: Delete.
* testsuite/gas/i860/float03.d: Delete.
* testsuite/gas/i860/float03.s: Delete.
* testsuite/gas/i860/float04.d: Delete.
* testsuite/gas/i860/float04.s: Delete.
* testsuite/gas/i860/form.d: Delete.
* testsuite/gas/i860/form.s: Delete.
* testsuite/gas/i860/i860.exp: Delete.
* testsuite/gas/i860/iarith.d: Delete.
* testsuite/gas/i860/iarith.s: Delete.
* testsuite/gas/i860/ldst01.d: Delete.
* testsuite/gas/i860/ldst01.s: Delete.
* testsuite/gas/i860/ldst02.d: Delete.
* testsuite/gas/i860/ldst02.s: Delete.
* testsuite/gas/i860/ldst03.d: Delete.
* testsuite/gas/i860/ldst03.s: Delete.
* testsuite/gas/i860/ldst04.d: Delete.
* testsuite/gas/i860/ldst04.s: Delete.
* testsuite/gas/i860/ldst05.d: Delete.
* testsuite/gas/i860/ldst05.s: Delete.
* testsuite/gas/i860/ldst06.d: Delete.
* testsuite/gas/i860/ldst06.s: Delete.
* testsuite/gas/i860/pfam.d: Delete.
* testsuite/gas/i860/pfam.s: Delete.
* testsuite/gas/i860/pfmam.d: Delete.
* testsuite/gas/i860/pfmam.s: Delete.
* testsuite/gas/i860/pfmsm.d: Delete.
* testsuite/gas/i860/pfmsm.s: Delete.
* testsuite/gas/i860/pfsm.d: Delete.
* testsuite/gas/i860/pfsm.s: Delete.
* testsuite/gas/i860/pseudo-ops01.d: Delete.
* testsuite/gas/i860/pseudo-ops01.s: Delete.
* testsuite/gas/i860/regress01.d: Delete.
* testsuite/gas/i860/regress01.s: Delete.
* testsuite/gas/i860/shift.d: Delete.
* testsuite/gas/i860/shift.s: Delete.
* testsuite/gas/i860/simd.d: Delete.
* testsuite/gas/i860/simd.s: Delete.
* testsuite/gas/i860/system.d: Delete.
* testsuite/gas/i860/system.s: Delete.
* testsuite/gas/i860/xp.d: Delete.
* testsuite/gas/i860/xp.s: Delete.
* Makefile.am: Remove i860 and i960 support.
* configure.tgt: Likewise.
* doc/Makefile.am: Likewise.
* doc/all.texi: Likewise.
* testsuite/gas/all/gas.exp
* config/obj-coff.h: Remove i960 support.
* doc/internals.texi: Likewise.
* expr.c: Likewise.
* read.c: Likewise.
* write.c: Likewise.
* write.h: Likewise.
* testsuite/gas/lns/lns.exp: Likewise.
* testsuite/gas/symver/symver.exp: Likewise.
* config/tc-m68k.c: Remove BOUT support.
* config/tc-score.c: Likewise.
* config/tc-score7.c: Likewise.
* config/tc-sparc.c: Likewise.
* symbols.c: Likewise.
* doc/h8.texi: Likewise.
* configure.ac: Remove BOUT and i860 support.
* doc/as.texinfo: Remove BOUT, i860 and i960 support
* Makefile.in: Regenerate.
* config.in: Regenerate.
* configure: Regenerate.
* doc/Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
2018-04-05 H.J. Lu <hongjiu.lu@intel.com>
PR gas/22318
* configure: Regenerated.
2018-04-04 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/23025
* testsuite/gas/i386/prefix.s: Add tests for vcvtpd2dq with
VEX and EVEX prefixes.
* testsuite/gas/i386/prefix.d: Updated.
2018-03-30 Peter Bergner <bergner@vnet.ibm.com>
PR binutils/23013
* config/tc-ppc.c (ppc_set_cpu): Select appropriate cpu when ppc_obj64
and little endian.
2018-03-28 Renlin Li <renlin.li@arm.com>
PR ld/22970
* config/tc-aarch64.c (reloc_table): Update entry for tprel_lo12 and
tprel_lo12_nc with pseudo relocations.
(ldst_lo12_determine_real_reloc_type): Add new relocations support.
(parse_operands): Handle BFD_RELOC_AARCH64_TLSLE_LDST_TPREL_LO12 and
BFD_RELOC_AARCH64_TLSLE_LDST_TPREL_LO12_NC pseudo relocations.
(md_apply_fix): Add handling for new relocation.
(aarch64_force_relocation): Likewise.
* testsuite/gas/aarch64/reloc-tprel_lo12-ldst16.d: New.
* testsuite/gas/aarch64/reloc-tprel_lo12-ldst16.s: New.
* testsuite/gas/aarch64/reloc-tprel_lo12-ldst32.d: New.
* testsuite/gas/aarch64/reloc-tprel_lo12-ldst32.s: New.
* testsuite/gas/aarch64/reloc-tprel_lo12-ldst64.d: New.
* testsuite/gas/aarch64/reloc-tprel_lo12-ldst64.s: New.
* testsuite/gas/aarch64/reloc-tprel_lo12-ldst8.d: New.
* testsuite/gas/aarch64/reloc-tprel_lo12-ldst8.s: New.
* testsuite/gas/aarch64/reloc-tprel_lo12_nc-ldst16.d: New.
* testsuite/gas/aarch64/reloc-tprel_lo12_nc-ldst16.s: New.
* testsuite/gas/aarch64/reloc-tprel_lo12_nc-ldst32.d: New.
* testsuite/gas/aarch64/reloc-tprel_lo12_nc-ldst32.s: New.
* testsuite/gas/aarch64/reloc-tprel_lo12_nc-ldst64.d: New.
* testsuite/gas/aarch64/reloc-tprel_lo12_nc-ldst64.s: New.
* testsuite/gas/aarch64/reloc-tprel_lo12_nc-ldst8.d: New.
* testsuite/gas/aarch64/reloc-tprel_lo12_nc-ldst8.s: New.
* testsuite/gas/aarch64/reloc-tprel_lo12-ldst16-ilp32.d: New.
* testsuite/gas/aarch64/reloc-tprel_lo12-ldst32-ilp32.d: New.
* testsuite/gas/aarch64/reloc-tprel_lo12-ldst64-ilp32.d: New.
* testsuite/gas/aarch64/reloc-tprel_lo12-ldst8-ilp32.d: New.
* testsuite/gas/aarch64/reloc-tprel_lo12_nc-ldst16-ilp32.d: New.
* testsuite/gas/aarch64/reloc-tprel_lo12_nc-ldst32-ilp32.d: New.
* testsuite/gas/aarch64/reloc-tprel_lo12_nc-ldst64-ilp32.d: New.
* testsuite/gas/aarch64/reloc-tprel_lo12_nc-ldst8-ilp32.d: New.
2018-03-28 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (check_VecOperands): Replace uses of
.vecesize. Always initialize op.
* testsuite/gas/i386/avx512_vpopcntdq.s,
testsuite/gas/i386/avx512bitalg_vl.s: Add Intel syntax vpopcnt
broadcast cases with explicit operand size.
* testsuite/gas/i386/avx512_vpopcntdq.d,
testsuite/gas/i386/avx512_vpopcntdq-intel.d,
testsuite/gas/i386/avx512bitalg_vl.d
testsuite/gas/i386/avx512bitalg_vl-intel.d: Adjust expectations.
2018-03-28 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (struct Broadcast_Operation): Adjust comment.
(check_VecOperands): Re-write broadcast validation code.
(check_VecOperations): Replace BROADCAST_1TO* uses.
* testsuite/gas/i386/inval-avx512f.s: Add various broadcast
cases.
* testsuite/gas/i386/inval-avx512f.l: Adjust expectations.
2018-03-28 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (process_suffix): Check .todword/.toqword
before zapping suffix.
2018-03-28 Jan Beulich <jbeulich@suse.com>
* testsuite/gas/i386/ilp32/x86-64-simd-suffix.d,
testsuite/gas/i386/x86-64-simd-suffix.d: Drop q suffix from
cvt*2si.
2018-03-28 Nick Clifton <nickc@redhat.com>
PR 22988
* config/tc-aarch64.c (parse_operands): Add code to handle
AARCH64_OPN_SVE_ADDR_R.
* testsuite/gas/aarch64/sve.s: Add tests for LDFF1xx instructions
with an assumed XZR offset address register.
* testsuite/gas/aarch64/sve.d: Update expected disassembly.
2018-03-22 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (check_VecOperands): Latch
i.broadcast->operand into op.
2018-03-22 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (match_template): Special case base opcode
0xa0 with HLE prefix.
* testsuite/gas/i386/hle.s: Add mov-accumulator-to-disp cases.
* testsuite/gas/i386/hle.d, testsuite/gas/i386/hle-intel.d:
Adjust expectations.
2018-03-22 Jan Beulich <jbeulich@suse.com>
* testsuite/gas/i386/opts.s: Add bndmov cases.
* testsuite/gas/i386/opts.d, testsuite/gas/i386/opts-intel.d,
testsuite/gas/i386/sse2avx-opts.d,
testsuite/gas/i386/sse2avx-opts-intel.d: Adjust expectations.
2018-03-22 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (match_mem_size): Extend sub-xmmword
exceptions.
* testsuite/gas/i386/xmmword.l, testsuite/gas/i386/xmmword.s:
New.
* testsuite/gas/i386/i386.exp: Run new test.
2018-03-22 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (match_template): Also match 2nd and 4th
operand's register sizes.
* testsuite/gas/i386/unspec.l, testsuite/gas/i386/unspec.s: New.
* testsuite/gas/i386/i386.exp: Run new test.
2018-03-19 Nick Clifton <nickc@redhat.com>
* po/uk.po: Updated Ukranian translation.
2018-03-16 Jim Wilson <jimw@sifive.com>
* config/tc-riscv.c (check_absolute_expr): Expand comment. New
parameter maybe_csr. If maybe_csr and O_symbol, print CSR name.
(riscv_ip): Add new argument to check_absolute_expr calls.
* testsuite/gas/riscv/bad-csr.d: New.
* testsuite/gas/riscv/bad-csr.l: New.
* testsuite/gas/riscv/bad-csr.s: New.
2018-03-14 Kito Cheng <kito.cheng@gmail.com>
* config/tc-riscv.c (opcode_name_list): New.
(opcode_names_hash): Likewise.
(init_opcode_names_hash): Likewise.
(opcode_name_lookup): Likewise.
(validate_riscv_insn): New argument length, and add new format
which used in .insn directive.
(md_begin): Refine hash table initialization logic into
init_opcode_hash.
(init_opcode_hash): New.
(my_getOpcodeExpression): Parse opcode name for .insn.
(riscv_ip): New argument hash, able to handle .insn directive.
(s_riscv_insn): Handler for .insn directive.
(riscv_pseudo_table): New entry for .insn.
* doc/c-riscv.texi: Add documentation for .insn directive.
* testsuite/gas/riscv/insn.d: Add testcase for .insn directive.
* testsuite/gas/riscv/insn.s: Likewise.
2018-03-13 Nick Clifton <nickc@redhat.com>
* po/ru.po: Updated Russian translation.
2018-03-09 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (optimize_encoding): Encode EVEX instructions
with VEX128 if EVEX encoding isn't required.
* testsuite/gas/i386/optimize-1.d: Updated.
* testsuite/gas/i386/x86-64-optimize-2.d: Likewise.
2018-03-09 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (check_VecOperations): Strip whitespace.
* testsuite/gas/i386/optimize-1.s: Add whitespaces before
{%k7} and {z},
* testsuite/gas/i386/x86-64-optimize-2.s: Likewise.
2018-03-08 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (set_cpu_arch): Set cpu_arch_isa_flags.
(md_parse_option): Likewise.
(optimize_encoding): Check i.tm.cpu_flags and cpu_arch_isa_flags
for cpuavx512vl instead of cpu_arch_flags. Optimize EVEX with
EVEX128 when EVEX encoding is required.
* testsuite/gas/i386/i386.exp: Run optimize-4, optimize-5,
x86-64-optimize-5 and x86-64-optimize-6.
* testsuite/gas/i386/optimize-1.d: Updated.
* testsuite/gas/i386/x86-64-optimize-2.d: Likewise.
* testsuite/gas/i386/optimize-4.d: New file.
* testsuite/gas/i386/optimize-4.s: Likewise.
* testsuite/gas/i386/optimize-5.d: Likewise.
* testsuite/gas/i386/optimize-5.s: Likewise.
* testsuite/gas/i386/x86-64-optimize-5.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-5.s: Likewise.
* testsuite/gas/i386/x86-64-optimize-6.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-6.s: Likewise.
2018-03-08 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (optimize_encoding): Also encode "clr reg64"
as "xor reg32, reg32".
* testsuite/gas/i386/x86-64-optimize-1.s: Add "clr reg64" tests.
* testsuite/gas/i386/x86-64-optimize-1.d: Updated.
2018-03-08 H.J. Lu <hongjiu.lu@intel.com>
* NEWS: Mention -mold-gcc removal.
* config/tc-i386.c (i386_error): Remove old_gcc_only.
(old_gcc): Removed.
(match_template): Remove old gcc support.
(OPTION_MOLD_GCC): Removed.
(OPTION_MRELAX_RELOCATIONS): Updated.
(md_longopts): Remove OPTION_MOLD_GCC.
(md_parse_option): Likewise.
(md_show_usage): Remove -mold-gcc.
* testsuite/gas/i386/general.s: Convert fsub/fdiv tests for old
(<= 2.8.1) versions of gcc.
* testsuite/gas/i386/intel.s: Likewise.
* testsuite/gas/i386/general.l: Updated.
* testsuite/gas/i386/intel-intel.d: Likewise.
* testsuite/gas/i386/intel.d: Likewise.
* testsuite/gas/i386/intel.e: Likewise.
* testsuite/gas/i386/i386.exp: Don't pass -mold-gcc to general.
2018-03-08 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (is_evex_encoding): New.
(optimize_encoding, md_assemble, md_assemble,
VEX_check_operands, build_modrm_byte): Use is_evex_encoding.
(build_evex_prefix): Derive EVEX length field from actual
operands if the template allows multiple ones.
2018-03-08 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (build_modrm_byte): Make VexNDD handling cope
with 3rd (immediate) operand.
2018-03-08 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (XMMWORD_MNEM_SUFFIX, YMMWORD_MNEM_SUFFIX,
ZMMWORD_MNEM_SUFFIX): Delete.
(process_suffix): Drop their uses. Re-arrange final part of
logic into a switch() statement. Drop special casing of
cmpxchg8b.
2018-03-08 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (match_template): Also match register
operands 0 and 2 for 3-operand forms.
* testsuite/gas/i386/unspec64.l, testsuite/gas/i386/unspec64.s:
New.
* testsuite/gas/i386/i386.exp: Run new test.
2018-03-08 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (process_suffix): Do common part of register
checks first.
2018-03-08 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (parse_insn): Move success return up. Combine
failure returns.
2018-03-08 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (cpu_flags_match): Add GFNI check to AVX
logic. Add respective logic for AVX512F.
* testsuite/gas/i386/arch-avx-1.s: Add GFNI test.
testsuite/gas/i386/arch-avx-1.d,
testsuite/gas/i386/arch-avx-1-1.l,
testsuite/gas/i386/arch-avx-1-2.l,
testsuite/gas/i386/arch-avx-1-3.l,
testsuite/gas/i386/arch-avx-1-4.l,
testsuite/gas/i386/arch-avx-1-5.l,
testsuite/gas/i386/arch-avx-1-6.l: Adjust expectations.
* testsuite/gas/i386/arch-avx-1-7.l,
testsuite/gas/i386/arch-avx-1-7.s,
testsuite/gas/i386/arch-avx-1-8.l,
testsuite/gas/i386/arch-avx-1-8.s,
testsuite/gas/i386/avx512f-plain.l,
testsuite/gas/i386/avx512f-plain.s,
testsuite/gas/i386/avx512vl-plain.l,
testsuite/gas/i386/avx512vl-plain.s: New.
* testsuite/gas/i386/i386.exp: Run new tests.
2018-03-08 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (cpu_flags_match): Move AVX512VL check ahead.
2018-03-08 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (CPU_FLAGS_32BIT_MATCH): Delete.
(cpu_flags_match): Use CPU_FLAGS_ARCH_MATCH instead of
CPU_FLAGS_32BIT_MATCH.
2018-03-08 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (CPU_FLAGS_AES_MATCH, CPU_FLAGS_AVX_MATCH,
CPU_FLAGS_PCLMUL_MATCH): Delete.
(CPU_FLAGS_32BIT_MATCH): Drop uses of deleted CPU_FLAGS_*_MATCH.
(cpu_flags_match): Combine AVX checks into
single if().
2018-03-08 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (cpu_flags_match): Drop "else" branches
setting CPU_FLAGS_ARCH_MATCH.
2018-03-08 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (md_assemble): Extend SSE check conditional.
* testsuite/gas/i386/ilp32/x86-64-sse-check-none.d,
testsuite/gas/i386/ilp32/x86-64-sse-check-warn.d,
testsuite/gas/i386/ilp32/x86-64-sse-check.d,
testsuite/gas/i386/sse-check-none.d,
testsuite/gas/i386/sse-check-warn.d,
testsuite/gas/i386/x86-64-sse-check.d,
testsuite/gas/i386/x86-64-sse-check-none.d,
testsuite/gas/i386/x86-64-sse-check-warn.d: Refer to sse-check.d.
* testsuite/gas/i386/sse-check.s: Add AES, GFNI, and PCLMUL
tests.
* testsuite/gas/i386/sse-check-none.s: Replace code by inclusion
of sse-check.s.
* testsuite/gas/i386/sse-check.d: Adjust expectations.
* testsuite/gas/i386/sse-check-error.l,
testsuite/gas/i386/x86-64-sse-check-error.l: Likewise.
* testsuite/gas/i386/sse-check-warn.e: Likewise.
2018-03-08 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (operand_size_match): Drop / replace uses of
.floatd.
2018-03-08 Jan Beulich <jbeulich@suse.com>
* testsuite/gas/i386/intel-intel.d: New.
* testsuite/gas/i386/i386.exp: Run new test.
2018-03-08 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (process_operands): Access operands only
after operand count assertion. Sanitize warning text. Fix
indentation.
* testsuite/gas/i386/avx512_4fmaps-warn.l,
gas/i386/x86-64-avx512_4fmaps-warn.l: Adjust expectations.
2018-03-08 Jan Beulich <jbeulich@suse.com>
* testsuite/gas/i386/x86-64-movd.s: Drop bogus vmovd memory forms.
* testsuite/gas/i386/x86-64-movd.d,
testsuite/gas/i386/x86-64-movd-intel.d: Adjust expectations.
2018-03-08 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (operand_type_and_not): New.
(build_modrm_byte): Use it to prevent clearing unrelated bits.
2018-03-08 Alan Modra <amodra@gmail.com>
* config/tc-ppc.c (ppc_handle_align): Correct last patch. Really
don't emit a group terminating nop for power9. Simplify cpu
tests.
2018-03-08 Alan Modra <amodra@gmail.com>
* config/tc-ppc.c (ppc_handle_align): Don't emit a group
terminating nop for power9.
2018-03-07 H.J. Lu <hongjiu.lu@intel.com>
PR gas/22874
* config/tc-i386.c (f32_5): Removed.
(f32_8): Likewise.
(f32_9): Likewise.
(f32_10): Likewise.
(f32_11): Likewise.
(f32_12): Likewise.
(f32_13): Likewise.
(f32_14): Likewise.
(f16_5): Likewise.
(f16_6): Likewise.
(f16_7): Likewise.
(f16_8): Likewise.
(jump_31): Likewise.
(alt64_11): Likewise.
(alt64_patt): Likewise.
(jump_disp8): New.
(jump32_disp32): Likewise.
(jump16_disp32): Likewise.
(alt_11): Likewise.
(f32_patt): Updated.
(f16_patt): Likewise.
(alt_patt): Add alt_11.
(i386_align_code): Merged with ...
(i386_generate_nops): This. Rewritten.
(fits_in_imm7): Moved before i386_generate_nops.
(fits_in_imm31): Likewise.
* config/tc-i386.h (MAX_MEM_FOR_RS_ALIGN_CODE): Updated to
4095.
(i386_align_code): Removed.
(HANDLE_ALIGN): Rewritten with i386_generate_nops.
* doc/as.texinfo: Update limits of control byte for x86 .nops
directive.
* testsuite/gas/i386/i386.exp: Run nops-7 and x86-64-nops-7.
* gas/testsuite/gas/i386/noavx-3.l: Updated.
* gas/testsuite/gas/i386/nop-1.d: Likewise.
* gas/testsuite/gas/i386/nop-1.s: Likewise.
* gas/testsuite/gas/i386/nop-2.d: Likewise.
* gas/testsuite/gas/i386/nop-2.s: Likewise.
* gas/testsuite/gas/i386/nop-3.d: Likewise.
* gas/testsuite/gas/i386/nop-4.d: Likewise.
* gas/testsuite/gas/i386/nop-5.d: Likewise.
* gas/testsuite/gas/i386/nop-5.s: Likewise.
* gas/testsuite/gas/i386/nop-6.d: Likewise.
* gas/testsuite/gas/i386/nop-bad-1.l: Likewise.
* gas/testsuite/gas/i386/nops-1-core2.d: Likewise.
* gas/testsuite/gas/i386/nops-1-i386-i686.d: Likewise.
* gas/testsuite/gas/i386/nops-1-i386.d: Likewise.
* gas/testsuite/gas/i386/nops-1-i686.d: Likewise.
* gas/testsuite/gas/i386/nops-1-k8.d: Likewise.
* gas/testsuite/gas/i386/nops-1.d: Likewise.
* gas/testsuite/gas/i386/nops-2-core2.d: Likewise.
* gas/testsuite/gas/i386/nops-2-i386.d: Likewise.
* gas/testsuite/gas/i386/nops-2.d: Likewise.
* gas/testsuite/gas/i386/nops-3-i386.d: Likewise.
* gas/testsuite/gas/i386/nops-3-i686.d: Likewise.
* gas/testsuite/gas/i386/nops-3.d: Likewise.
* gas/testsuite/gas/i386/nops-4-i386.d: Likewise.
* gas/testsuite/gas/i386/nops-4-i686.d: Likewise.
* gas/testsuite/gas/i386/nops-4.d: Likewise.
* gas/testsuite/gas/i386/nops-4a-i686.d: Likewise.
* gas/testsuite/gas/i386/nops-5-i686.d: Likewise.
* gas/testsuite/gas/i386/nops-5.d: Likewise.
* gas/testsuite/gas/i386/nops-6.d: Likewise.
* gas/testsuite/gas/i386/nops16-1.d: Likewise.
* gas/testsuite/gas/i386/x86-64-nop-1.d: Likewise.
* gas/testsuite/gas/i386/x86-64-nop-2.d: Likewise.
* gas/testsuite/gas/i386/x86-64-nop-5.d: Likewise.
* gas/testsuite/gas/i386/x86-64-nops-1-core2.d: Likewise.
* gas/testsuite/gas/i386/x86-64-nops-1-g64.d: Likewise.
* gas/testsuite/gas/i386/x86-64-nops-1-k8.d: Likewise.
* gas/testsuite/gas/i386/x86-64-nops-1-pentium.d: Likewise.
* gas/testsuite/gas/i386/x86-64-nops-1.d: Likewise.
* gas/testsuite/gas/i386/x86-64-nops-2.d: Likewise.
* gas/testsuite/gas/i386/x86-64-nops-3.d: Likewise.
* gas/testsuite/gas/i386/x86-64-nops-4-core2.d: Likewise.
* gas/testsuite/gas/i386/x86-64-nops-4-k8.d: Likewise.
* gas/testsuite/gas/i386/x86-64-nops-4.d: Likewise.
* gas/testsuite/gas/i386/x86-64-nops-5-k8.d: Likewise.
* gas/testsuite/gas/i386/x86-64-nops-5.d: Likewise.
* gas/testsuite/gas/i386/ilp32/x86-64-nops-1-core2.d: Likewise.
* gas/testsuite/gas/i386/ilp32/x86-64-nops-1-k8.d: Likewise.
* gas/testsuite/gas/i386/ilp32/x86-64-nops-1-pentium.d: Likewise.
* gas/testsuite/gas/i386/ilp32/x86-64-nops-1.d: Likewise.
* gas/testsuite/gas/i386/ilp32/x86-64-nops-2.d: Likewise.
* gas/testsuite/gas/i386/ilp32/x86-64-nops-3.d: Likewise.
* gas/testsuite/gas/i386/ilp32/x86-64-nops-4-core2.d: Likewise.
* gas/testsuite/gas/i386/ilp32/x86-64-nops-4-k8.d: Likewise.
* gas/testsuite/gas/i386/ilp32/x86-64-nops-4.d: Likewise.
* gas/testsuite/gas/i386/ilp32/x86-64-nops-5-k8.d: Likewise.
* gas/testsuite/gas/i386/ilp32/x86-64-nops-5.d: Likewise.
* gas/testsuite/gas/i386/nops-7.d: New file.
* gas/testsuite/gas/i386/nops-7.s: Likewise.
* gas/testsuite/gas/i386/x86-64-nops-7.d: Likewise.
2018-03-07 Alan Modra <amodra@gmail.com>
* testsuite/gas/ppc/aix.exp: Run for rs6000 too.
* testsuite/gas/ppc/ppc.exp: Run more tests for non-ELF targets.
* testsuite/gas/ppc/machine.d: Don't run for PE targets.
2018-03-02 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/tc-arm.c (md_begin): Add NULL pointer check before
dereferencing march_ext_opt.
2018-03-01 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/tc-arm.c (cpu_variant, arm_arch_used, thumb_arch_used,
legacy_cpu, legacy_fpu, mcpu_cpu_opt, dyn_mcpu_ext_opt,
mcpu_fpu_opt, march_cpu_opt, dyn_march_ext_opt, march_fpu_opt,
mfpu_opt, object_arch, selected_cpu): Comment meaning of variables.
(dyn_mcpu_ext_opt): Also rename into ...
(mcpu_ext_opt): This.
(dyn_march_ext_opt): Also rename into ...
(march_ext_opt): This.
(object_arch): Also rename into ...
(selected_object_arch): This and make it a plain arm_feature_set
structure.
(selected_arch, selected_ext, selected_fpu): New static variables.
(mark_feature_used): Fix comments, feature is marked as used iff it is
currently allowed.
(do_bx): Adapt to change in name and type of object_arch.
(md_begin): Set selected_arch rather than mcpu_cpu_opt, selected_ext
rather than dyn_mcpu_ext_opt and selected_fpu rather than mfpu_opt.
Remove dead code to set default FPU if architecture version is greater
than 5. Set all CPU bits of cpu_variant directly in autodection
leaving mcpu_cpu_opt, selected_arch and selected_cpu unset.
(arm_parse_extension): Take extension feature set pointer parameter by
value rather than by pointer. Remove allocation code. Adapt code
accordingly.
(arm_parse_cpu): Adapt to variable renaming and changes in
arm_parse_extension () signature.
(arm_parse_arch): Likewise.
(aeabi_set_public_attributes): Also set selected_arch and selected_ext
in addition to selected_cpu. Set flags_arch and flags_ext from them
instead of selected_cpu. Adapt to variables renaming and type change.
(arm_md_post_relax): Adapt to variable renaming.
(s_arm_cpu): Set selcted_cpu_cpu and selected_ext instead of
mcpu_cpu_opt and dyn_mcpu_ext_opt. Set selected_cpu from them and
cpu_variant from selected_cpu and selected_fpu.
(s_arm_arch): Likewise.
(s_arm_object_arch): Adapt to variable renaming.
(s_arm_arch_extension): Use ARM_CPU_IS_ANY instead of checking feature
set against arm_any. Check selected_arch rather than *mcpu_cpu_opt.
Set selected_ext rather than *dyn_mcpu_ext_opt and remove allocation
code.
(s_arm_fpu): Set selected_fpu instead of mfpu_opt. Set all CPU feature
bits if in autodetection mode.
2018-03-01 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (optimize_encoding): Optimize AVX256 and
AVX512 vpsub[bwdq] instructions.
* testsuite/gas/i386/optimize-1.s: Add tests for AVX256 and
AVX512 vpsub[bwdq] instructions.
* testsuite/gas/i386/x86-64-optimize-2.s: Likewise.
* testsuite/gas/i386/optimize-1.d: Updated.
* testsuite/gas/i386/x86-64-optimize-2.d: Likewise.
2018-03-01 Alan Modra <amodra@gmail.com>
* configure.ac (ALL_LINGUAS): Add uk. Sort.
* configure: Regenerate.
2018-02-27 H.J. Lu <hongjiu.lu@intel.com>
* NEWS: Rename .nop to .nops.
* doc/as.texinfo: Likewise.
* read.c (potable): Add "nops". Remove "nop".
(s_nop): Renamed to ...
(s_nops): This.
* read.h (s_nop): Renamed to ...
(s_nops): This.
* write.c (cvt_frag_to_fill): Rename .nop to .nops.
(md_generate_nops): Likewise.
(relax_segment): Likewise.
* testsuite/gas/i386/nop-1.d: Updated.
* testsuite/gas/i386/nop-1.s: Likewise.
* testsuite/gas/i386/nop-2.d: Likewise.
* testsuite/gas/i386/nop-2.s: Likewise.
* testsuite/gas/i386/nop-3.d: Likewise.
* testsuite/gas/i386/nop-3.s: Likewise.
* testsuite/gas/i386/nop-4.d: Likewise.
* testsuite/gas/i386/nop-4.s: Likewise.
* testsuite/gas/i386/nop-5.d: Likewise.
* testsuite/gas/i386/nop-5.s: Likewise.
* testsuite/gas/i386/nop-6.d: Likewise.
* testsuite/gas/i386/nop-6.s: Likewise.
* testsuite/gas/i386/nop-bad-1.l: Likewise.
* testsuite/gas/i386/nop-bad-1.s: Likewise.
* testsuite/gas/i386/x86-64-nop-1.d: Likewise.
* testsuite/gas/i386/x86-64-nop-2.d: Likewise.
* testsuite/gas/i386/x86-64-nop-3.d: Likewise.
* testsuite/gas/i386/x86-64-nop-4.d: Likewise.
* testsuite/gas/i386/x86-64-nop-5.d: Likewise.
* testsuite/gas/i386/x86-64-nop-6.d: Likewise.
2018-02-27 H.J. Lu <hongjiu.lu@intel.com>
PR gas/22871
* NEWS: Mention -O[2|s].
* config/tc-i386.c (_i386_insn): Add no_optimize.
(optimize): New.
(optimize_for_space): Likewise.
(fits_in_imm7): New function.
(fits_in_imm31): Likewise.
(optimize_encoding): Likewise.
(md_assemble): Call optimize_encoding to optimize encoding.
(parse_insn): Handle {nooptimize}.
(md_shortopts): Append "O::".
(md_parse_option): Handle -On.
* doc/c-i386.texi: Document -O0, -O, -O1, -O2 and -Os as well
as {nooptimize}.
* testsuite/gas/cfi/cfi-x86_64.d: Pass -O0 to assembler.
* testsuite/gas/i386/ilp32/cfi/cfi-x86_64.d: Likewise.
* testsuite/gas/i386/i386.exp: Run optimize-1, optimize-2,
optimize-3, x86-64-optimize-1, x86-64-optimize-2,
x86-64-optimize-3 and x86-64-optimize-4.
* testsuite/gas/i386/optimize-1.d: New file.
* testsuite/gas/i386/optimize-1.s: Likewise.
* testsuite/gas/i386/optimize-2.d: Likewise.
* testsuite/gas/i386/optimize-2.s: Likewise.
* testsuite/gas/i386/optimize-3.d: Likewise.
* testsuite/gas/i386/optimize-3.s: Likewise.
* testsuite/gas/i386/x86-64-optimize-1.s: Likewise.
* testsuite/gas/i386/x86-64-optimize-1.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-2.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-2.s: Likewise.
* testsuite/gas/i386/x86-64-optimize-3.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-3.s: Likewise.
* testsuite/gas/i386/x86-64-optimize-4.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-4.s: Likewise.
2018-02-27 Nick Clifton <nickc@redhat.com>
* po/ru.po: Updated Russian translation.
2018-02-26 Maciej W. Rozycki <macro@mips.com>
* doc/as.texinfo (Pseudo Ops): Clean up `.dc' and `.ds'
descriptions.
2018-02-26 Nick Clifton <nickc@redhat.com>
* doc/as.texinfo (Dc): Fix typo.
2018-02-26 Alan Modra <amodra@gmail.com>
* testsuite/gas/mips/reginfo-2.l: Update.
2018-02-23 Alan Modra <amodra@gmail.com>
* testsuite/gas/mips/reginfo-2.l: Update.
2018-02-23 Nick Clifton <nickc@redhat.com>
* doc/as.texinfo (Pseudo Ops): Add nodes for .dc, .dcb and .ds.
2018-02-23 Kuan-Lin Chen <kuanlinchentw@gmail.com>
* config/tc-nds32.c (ict_model): New function. Hook new
directive .ict_model.
(nds32_insert_relax_entry): Tag the bits of entry relocation
for .ict_model.
2018-02-22 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (_i386_insn): Add rex_encoding.
(md_assemble): When i.rex_encoding is true, generate a REX byte
if possible.
(parse_insn): Set i.rex_encoding for {rex}.
* doc/c-i386.texi: Document {rex}.
* testsuite/gas/i386/x86-64-pseudos.s: Add {rex} tests.
* testsuite/gas/i386/x86-64-pseudos.d: Updated.
2018-02-22 A. Wilcox <awilfox@adelielinux.org>
PR 22014
* config/tc-mips.c (mips_lookup_insn): Use memmove to strip the
instruction size suffix.
2018-02-20 Maciej W. Rozycki <macro@mips.com>
* testsuite/gas/mips/mips16-branch-reloc-4.d: New test.
* testsuite/gas/mips/mips16-branch-reloc-5.d: New test.
* testsuite/gas/mips/mips16-branch-reloc-4.s: New test source.
* testsuite/gas/mips/mips16-branch-reloc-5.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
2018-02-20 Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (struct litpool_frag): Add new field
literal_count.
(MAX_AUTO_POOL_LITERALS, MAX_EXPLICIT_POOL_LITERALS)
(MAX_POOL_LITERALS): New macro definitions.
(auto_litpool_limit): Initialize to 0.
(md_parse_option): Set auto_litpool_limit in the presence of
--auto-litpools option.
(xtensa_maybe_create_literal_pool_frag): Zero-initialize
literal_count field.
(xg_find_litpool): New function. Make sure that found literal
pool size is within the limit.
(xtensa_move_literals): Extract literal pool search code into
the new function.
* testsuite/gas/xtensa/all.exp: Add auto-litpools-2 test.
* testsuite/gas/xtensa/auto-litpools-2.d: New file.
* testsuite/gas/xtensa/auto-litpools-2.s: New file.
* testsuite/gas/xtensa/auto-litpools.d: Fix up changed
addresses.
* testsuite/gas/xtensa/auto-litpools.s: Change literal value so
that objdump doesn't get out of sync.
2018-02-20 Thomas Preud'homme <thomas.preudhomme@arm.com>
* doc/c-arm.texi (.arch_extension): Mention extensions it accepts are
also the same as -march.
2018-02-17 H.J. Lu <hongjiu.lu@intel.com>
* NEWS: Mention .nop directive.
* as.h (_relax_state): Add rs_space_nop and rs_fill_nop.
* read.c (potable): Add .nop.
(s_nop): New function.
* read.h (s_nop): New prototype.
* write.c (cvt_frag_to_fill): Handle rs_space_nop and
rs_fill_nop.
(md_generate_nops): New function.
(relax_segment): Likewise.
(write_contents): Use md_generate_nops for rs_fill_nop.
* config/tc-i386.c (alt64_11): New.
(alt64_patt): Likewise.
(md_convert_frag): Handle rs_space_nop.
(i386_output_nops): New function.
(i386_generate_nops): Likewise.
(i386_align_code): Call i386_output_nops.
* config/tc-i386.h (i386_generate_nops): New.
(md_generate_nops): Likewise.
* doc/as.texinfo: Document .nop directive.
* testsuite/gas/i386/i386.exp: Run .nop directive tests.
* testsuite/gas/i386/nop-1.d: New file.
* testsuite/gas/i386/nop-1.s: Likewise.
* testsuite/gas/i386/nop-2.d: Likewise.
* testsuite/gas/i386/nop-2.s: Likewise.
* testsuite/gas/i386/nop-3.d: Likewise.
* testsuite/gas/i386/nop-3.s: Likewise.
* testsuite/gas/i386/nop-4.d: Likewise.
* testsuite/gas/i386/nop-4.s: Likewise.
* testsuite/gas/i386/nop-5.d: Likewise.
* testsuite/gas/i386/nop-5.s: Likewise.
* testsuite/gas/i386/nop-6.d: Likewise.
* testsuite/gas/i386/nop-6.s: Likewise.
* testsuite/gas/i386/nop-bad-1.l: Likewise.
* testsuite/gas/i386/nop-bad-1.s: Likewise.
* testsuite/gas/i386/x86-64-nop-1.d: Likewise.
* testsuite/gas/i386/x86-64-nop-2.d: Likewise.
* testsuite/gas/i386/x86-64-nop-3.d: Likewise.
* testsuite/gas/i386/x86-64-nop-4.d: Likewise.
* testsuite/gas/i386/x86-64-nop-5.d: Likewise.
* testsuite/gas/i386/x86-64-nop-6.d: Likewise.
2018-02-15 Tamar Christina <tamar.christina@arm.com>
* config/tc-arm.c (cpu_arch_ver): Renumber ARM_ARCH_V8_4A.
* testsuite/gas/arm/attr-march-armv8_4-a.d: New.
2018-02-13 Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (xg_find_best_trampoline): Skip trampoline
frag that contains source address.
2018-02-13 Nick Clifton <nickc@redhat.com>
PR 22773
* config/tc-arm.c (md_apply_fix): Test Rn field of Thumb ORR
instruction before assuming that it is a MOV instruction.
* testsuite/gas/arm/pr22773.s: New test.
* testsuite/gas/arm/pr22773.d: New test driver.
* testsuite/gas/arm/pr22773.l: New expected output.
2018-02-13 H.J. Lu <hongjiu.lu@intel.com>
PR gas/22791
* config/tc-i386.c (need_plt32_p): New function.
(output_jump): Generate BFD_RELOC_X86_64_PLT32 if possible.
(md_estimate_size_before_relax): Likewise.
* testsuite/gas/i386/reloc64.d: Updated.
* testsuite/gas/i386/x86-64-jump.d: Likewise.
* testsuite/gas/i386/x86-64-mpx-branch-1.d: Likewise.
* testsuite/gas/i386/x86-64-mpx-branch-2.d: Likewise.
* testsuite/gas/i386/x86-64-relax-2.d: Likewise.
* testsuite/gas/i386/x86-64-relax-3.d: Likewise.
* testsuite/gas/i386/ilp32/reloc64.d: Likewise.
* testsuite/gas/i386/ilp32/x86-64-branch.d: Likewise.
2018-02-13 Maciej W. Rozycki <macro@mips.com>
* testsuite/gas/mips/loongson-3a-2.d: Rename test.
2018-02-13 Nick Clifton <nickc@redhat.com>
PR 22823
* config/obj-elf.c (elf_pseudo_table): Remove now redundant
casts.
(obj_elf_vtable_inherit): Rename to obj_elf_get_vtable_inherit.
(obj_elf_vtable_inherit): New stub function that calls
obj_elf_get_vtable_inherit.
(obj_elf_vtable_entry): Rename to obj_elf_get_vtable_entry.
(obj_elf_vtable_entry): New stub function that calls
obj_elf_get_vtable_entry.
* config/obj-elf.h (obj_elf_vtable_inherit): Update prototype.
(obj_elf_vtable_entry) Likewise.
(obj_elf_get_vtable_inherit) Likewise.
(obj_elf_get_vtable_entry) Likewise.
* config/tc-arm.c (md_pseudo_table): Remove now redundant cast.
* config/tc-i386c (md_pseudo_table): Likewise.
* config/tc-hppa.c (pa_vtable_entry): Call
obj_elf_get_vtable_entry.
(pa_vtable_inherit): Call obj_elf_get_vtable_inherit.
* config/tc-mips.c (s_mips_file): Replace call to dwarf2_get_file
with call to dwarf2_get_filename.
* dwarf2dbg.c (dwarf2_directive_file): Rename to
dwarf2_directive_filename.
(dwarf2_directive_file): New stub function that calls
dwarf2_directive_filename.
* dwarf2dbg.h: Prototype dwarf2_directive_filename.
2018-02-12 Maciej W. Rozycki <macro@mips.com>
* testsuite/gas/mips/reginfo-2-n32.d: Add `--no-pad-sections' to
`as' flags.
2018-02-12 Henry Wong <henry@stuffedcow.net>
* testsuite/gas/mips/r6.d: Update for "sigrie" encoding fix.
* testsuite/gas/mips/r6-n32.d: Likewise.
* testsuite/gas/mips/r6-n64.d: Likewise.
2018-02-12 Nick Clifton <nickc@redhat.com>
* po/ru.po: Updated Russian translation.
2018-02-08 Alan Modra <amodra@gmail.com>
PR 22819
* config/tc-ppc.c (md_assemble): Rewrite insn alignment checking.
(ppc_frag_check): Likewise.
* testsuite/gas/ppc/misalign.d,
* testsuite/gas/ppc/misalign.l,
* testsuite/gas/ppc/misalign.s: New test.
* testsuite/gas/ppc/misalign2.d,
* testsuite/gas/ppc/misalign2.s: New test.
* testsuite/gas/ppc/ppc.exp: Run them.
2018-02-05 Maciej W. Rozycki <macro@mips.com>
* config/tc-riscv.c (riscv_handle_implicit_zero_offset): Rename
`expr' parameter to `ep'.
2018-02-05 Maciej W. Rozycki <macro@mips.com>
* testsuite/gas/mips/reginfo-2.d: New test.
* testsuite/gas/mips/reginfo-2-n32.d: New test.
* testsuite/gas/mips/reginfo-2.l: New test stderr output.
* testsuite/gas/mips/reginfo-2.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
2018-02-05 Nick Clifton <nickc@redhat.com>
* po/ru.po: Updated Russian translation.
2018-01-31 Alan Modra <amodra@gmail.com>
PR 22714
* app.c (last_char): New static var.
(struct app_save): Add last_char field.
(app_push, app_pop): Handle it.
(do_scrub_chars): Use last_char in test for "\@". Set last_char.
2018-01-29 Eric Botcazou <ebotcazou@adacore.com>
PR gas/22738
* config/tc-sparc.h (sparc_mach): Declare.
(TARGET_MACH): Define to above.
* config/tc-sparc.c (sparc_mach): New function.
(sparc_md_end): Minor tweak.
2018-01-29 Nick Clifton <nickc@redhat.com>
* po/ru.po: Updated Russian translation.
2018-01-26 Maciej W. Rozycki <macro@mips.com>
* configure.tgt: Use generic emulation for `mips-*-windiss',
overriding the blanket choice made for `*-*-windiss'.
2018-01-26 Maciej W. Rozycki <macro@mips.com>
* configure.tgt: Use `mips-*-sysv4*' rather than
`mips-*-sysv4*MP*'.
2018-01-24 Renlin Li <renlin.li@arm.com>
* config/tc-aarch64.c (reloc_table): add entries for
BFD_RELOC_AARCH64_MOVW_PREL_G0, BFD_RELOC_AARCH64_MOVW_PREL_G0_NC,
BFD_RELOC_AARCH64_MOVW_PREL_G1, BFD_RELOC_AARCH64_MOVW_PREL_G1_NC,
BFD_RELOC_AARCH64_MOVW_PREL_G2, BFD_RELOC_AARCH64_MOVW_PREL_G2_NC,
BFD_RELOC_AARCH64_MOVW_PREL_G3.
(process_movw_reloc_info): Supports newly added MOVW_PREL relocations.
(md_apply_fix): Likewise
* testsuite/gas/aarch64/prel_g0.s: New.
* testsuite/gas/aarch64/prel_g0.d: New.
* testsuite/gas/aarch64/prel_g0_nc.s: New.
* testsuite/gas/aarch64/prel_g0_nc.d: New.
* testsuite/gas/aarch64/prel_g1.s: New.
* testsuite/gas/aarch64/prel_g1.d: New.
* testsuite/gas/aarch64/prel_g1_nc.s: New.
* testsuite/gas/aarch64/prel_g1_nc.d: New.
* testsuite/gas/aarch64/prel_g2.s: New.
* testsuite/gas/aarch64/prel_g2.d: New.
* testsuite/gas/aarch64/prel_g2_nc.s: New.
* testsuite/gas/aarch64/prel_g2_nc.d: New.
* testsuite/gas/aarch64/prel_g3.s: New.
* testsuite/gas/aarch64/prel_g3.d: New.
2018-01-23 Maciej W. Rozycki <macro@mips.com>
* configure.ac: Also set `mips_default_abi' to N32_ABI for
`mips64*-ps2-elf*'.
* configure: Regenerate.
2018-01-23 Maciej W. Rozycki <macro@mips.com>
* config/tc-mips.c (options): Remove OPTION_COMPAT_ARCH_BASE
enum value.
2018-01-23 Igor Tsimbalist <igor.v.tsimbalist@intel.com>
* config/tc-i386.c (cpu_arch): Add .pconfig.
* doc/c-i386.texi: Document .pconfig.
* testsuite/gas/i386/i386.exp: Add PCONFIG tests.
* testsuite/gas/i386/pconfig-intel.d: New test.
* testsuite/gas/i386/pconfig.d: Likewise.
* testsuite/gas/i386/pconfig.s: Likewise.
* testsuite/gas/i386/x86-64-pconfig-intel.d: Likewise.
* testsuite/gas/i386/x86-64-pconfig.d: Likewise.
* testsuite/gas/i386/x86-64-pconfig.s: Likewise.
2018-01-23 Igor Tsimbalist <igor.v.tsimbalist@intel.com>
* config/tc-i386.c (cpu_arch): Add .wbnoinvd.
* doc/c-i386.texi: Document .wbnoinvd.
* testsuite/gas/i386/i386.exp: Add WBNOINVD tests.
* testsuite/gas/i386/wbnoinvd-intel.d: New test.
* testsuite/gas/i386/wbnoinvd.d: Likewise.
* testsuite/gas/i386/wbnoinvd.s: Likewise.
* testsuite/gas/i386/x86-64-wbnoinvd-intel.d: Likewise.
* testsuite/gas/i386/x86-64-wbnoinvd.d: Likewise.
* testsuite/gas/i386/x86-64-wbnoinvd.s: Likewise.
2018-01-23 Maciej W. Rozycki <macro@mips.com>
* config/tc-mips.c (md_show_usage): Correctly indicate the
configuration-specific default ABI.
2018-01-23 Maciej W. Rozycki <macro@mips.com>
* config/tc-mips.c (md_show_usage): Report `-mmips16e2' and
`-mno-mips16e2' options.
2018-01-22 Maciej W. Rozycki <macro@mips.com>
* doc/c-mips.texi (MIPS ASE Instruction Generation Overrides):
Correct syntax of the `.set nomips16e2' directive description.
2018-01-22 Oleg Endo <olegendo@gcc.gnu.org>
PR 22737
* config/tc-rx.c (rx_start_line): Handle escaped double-quote character.
* testsuite/gas/rx/pr22737.s: New test.
* testsuite/gas/rx/pr22737.d: Likewise.
* testsuite/gas/rx/rx.exp: Run the new test.
2018-01-19 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/tc-arm.c (ToC macro): Remove spurious comment.
(ToU macro): Likewise.
2018-01-17 Jim Wilson <jimw@sifive.com>
* config/tc-riscv.c (validate_riscv_insn) <'z'>: New.
(riscv_ip) <'z'>: New.
2018-01-17 Igor Tsimbalist <igor.v.tsimbalist@intel.com>
* config/tc-i386.c (cpu_arch): Delete .cet. Add .ibt, .shstk.
(cpu_noarch): Add noibt, noshstk.
(parse_insn): Change cpucet to cpuibt.
* doc/c-i386.texi: Delete .cet. Add .ibt, .shstk.
* testsuite/gas/i386/cet-ibt-inval.l: New test.
* testsuite/gas/i386/cet-ibt-inval.s: Likewise.
* testsuite/gas/i386/cet-shstk-inval.l: Likewise.
* testsuite/gas/i386/cet-shstk-inval.s: Likewise.
* testsuite/gas/i386/x86-64-cet-ibt-inval.l: Likewise.
* testsuite/gas/i386/x86-64-cet-ibt-inval.s: Likewise.
* testsuite/gas/i386/x86-64-cet-shstk-inval.l: Likewise.
* testsuite/gas/i386/x86-64-cet-shstk-inval.s: Likewise.
2018-01-16 Nick Clifton <nickc@redhat.com>
* po/fr.po: Updated French translation.
2018-01-15 Jim Wilson <jimw@sifive.com>
* testsuite/gas/riscv/c-zero-imm.s: Test addi that compresses to c.nop.
* testsuite/gas/riscv/c-zero-imm.d: Likewise.
2018-01-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/tc-arm.c (ToC): Define macro.
(ToU): Likewise.
(insns): Make use of above macros for new instructions introduced in
Armv8-M.
2018-01-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/tc-arm.c (insns): Make blxns, bxns, tt, ttt, tta, ttat, vlldm
and vlstm conditionally executable and reindent parameters.
* testsuite/gas/arm/archv8m-cmse-main.s: Add conditional version of
aforementionned instructions.
2018-01-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/tc-arm.c (it_fsm_post_encode): Do not warn if targeting M
profile architecture or if in autodetection mode. Clarify that
deprecation is for performance reason and concerns Armv8-A and Armv8-R.
* testsuite/gas/arm/armv8-ar-bad.l: Adapt to new IT deprecation warning
message.
* testsuite/gas/arm/armv8-ar-it-bad.l: Likewise.
* testsuite/gas/arm/sp-pc-validations-bad-t-v8a.l: Likewise.
* testsuite/gas/arm/udf.l: Likewise.
* testsuite/gas/arm/udf.d: Assemble for Armv8-A explicitely.
2018-01-15 Nick Clifton <nickc@redhat.com>
* po/uk.po: Updated Ukranian translation.
2018-01-13 Nick Clifton <nickc@redhat.com>
* po/gas.pot: Regenerated.
2018-01-13 Nick Clifton <nickc@redhat.com>
* configure: Regenerate.
2018-01-13 Nick Clifton <nickc@redhat.com>
2.30 branch created.
* NEWS: Add marker for 2.30.
2018-01-12 Gunther Nikl <gnikl@users.sourceforge.net>
* gas/config/aout_gnu.h (USE_EXTENDED_RELOC): Explicitly
define to 0 and 1. Remove a dangling reference to "AMD 29000"
in a comment.
2018-01-11 Igor Tsimbalist <igor.v.tsimbalist@intel.com>
* testsuite/i386/avx512_4fmaps_vl-warn.l: Likewise.
* testsuite/i386/avx512_4fmaps_vl-warn.s: Likewise.
* testsuite/i386/avx512_4fmaps_vl.d: Likewise.
* testsuite/i386/avx512_4fmaps_vl.s: Likewise.
* testsuite/i386/avx512_4vnniw_vl-intel.d: Likewise.
* testsuite/i386/avx512_4vnniw_vl.d: Likewise.
* testsuite/i386/avx512_4vnniw_vl.s: Likewise.
* testsuite/i386/i386.exp: Removed _vl tests for 4fmaps an 4vnniw
tests.
* testsuite/i386/x86-64-avx512_4fmaps_vl-intel.d: Removed.
* testsuite/i386/x86-64-avx512_4fmaps_vl-warn.l: Likewise.
* testsuite/i386/x86-64-avx512_4fmaps_vl-warn.s: Likewise.
* testsuite/i386/x86-64-avx512_4fmaps_vl.d: Likewise.
* testsuite/i386/x86-64-avx512_4fmaps_vl.s: Likewise.
* testsuite/i386/x86-64-avx512_4vnniw_vl-intel.d: Likewise.
* testsuite/i386/x86-64-avx512_4vnniw_vl.d: Likewise.
* testsuite/i386/x86-64-avx512_4vnniw_vl.s: Likewise.
2018-01-11 Alan Modra <amodra@gmail.com>
* config/tc-arm.c (aeabi_set_public_attributes): Avoid false
positive "profile may be used uninitialized".
2018-01-10 Jan Beulich <jbeulich@suse.com>
* testsuite/gas/i386/avx512_4fmaps.s,
testsuite/gas/i386/avx512_4fmaps_vl.s,
testsuite/gas/i386/x86-64-avx512_4fmaps.s,
testsuite/gas/i386/x86-64-avx512_4fmaps_vl.s: Actually test
Disp8 forms (and the transition happening at the right
boundary).
* testsuite/gas/i386/avx512_4fmaps.d,
testsuite/gas/i386/avx512_4fmaps-intel.d,
testsuite/gas/i386/avx512_4fmaps_vl.d,
testsuite/gas/i386/avx512_4fmaps_vl-intel.d,
testsuite/gas/i386/x86-64-avx512_4fmaps.d,
testsuite/gas/i386/x86-64-avx512_4fmaps-intel.d,
testsuite/gas/i386/x86-64-avx512_4fmaps_vl.d,
testsuite/gas/i386/x86-64-avx512_4fmaps_vl-intel.d: Adjust
expectations.
2018-01-10 Jan Beulich <jbeulich@suse.com>
* testsuite/gas/i386/avx512bw.s,
testsuite/gas/i386/avx512bw_vl.s: Add VPCMP* tests with memory
operands.
* testsuite/gas/i386/avx512bw-intel.d,
testsuite/gas/i386/avx512bw.d,
testsuite/gas/i386/avx512bw_vl-intel.d.
testsuite/gas/i386/avx512bw_vl.d: Adjust expectations.
2018-01-09 Jim Wilson <jimw@sifive.com>
* testsuite/gas/riscv/auipc-x0.d: New.
* testsuite/gas/riscv/auipc-x0.s: New.
2018-01-09 James Greenhalgh <james.greenhalgh@arm.com>
* config/tc-arm.c (insns): Add csdb, enable for Armv3 and above
in Arm execution state, and Armv6T2 and above in Thumb execution
state.
* testsuite/gas/arm/csdb.s: New.
* testsuite/gas/arm/csdb.d: New.
* testsuite/gas/arm/thumb2_it_bad.l: Add csdb.
* testsuite/gas/arm/thumb2_it_bad.s: Add csdb.
2018-01-09 James Greenhalgh <james.greenhalgh@arm.com>
* testsuite/gas/aarch64/system.d: Update expected results to expect
CSDB for hint 0x14.
2018-01-08 H.J. Lu <hongjiu.lu@intel.com>
PR gas/22681
* testsuite/gas/i386/i386.exp: Run x86-64-movd and
x86-64-movd-intel.
* testsuite/gas/i386/x86-64-movd-intel.d: New file.
* testsuite/gas/i386/x86-64-movd.d: Likewise.
* testsuite/gas/i386/x86-64-movd.s: Likewise.
2018-01-08 Nick Clifton <nickc@redhat.com>
PR 22553
* doc/c-i386.texi (i386-Directives): Document the .largecomm
directive.
2018-01-04 Jim Wilson <jimw@sifive.com>
* testsuite/gas/riscv/priv-reg.s: Add missing stval and mtval.
* testsuite/gas/riscv/priv-reg.d: Likewise.
2018-01-03 Alan Modra <amodra@gmail.com>
Update year range in copyright notice of all files.
2018-01-02 Nick Clifton <nickc@redhat.com>
PR 18119
* config/tc-arm.c (do_mrs): Fix test of bits 16-19 in non-banked
version of ARM MRS instruction.
For older changes see ChangeLog-2017
Copyright (C) 2018 Free Software Foundation, Inc.
Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
notice and this notice are preserved.
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End: