binutils-gdb/gas/configure.in

779 lines
20 KiB
Plaintext

dnl Process this file with autoconf to produce a configure script.
dnl
dnl And be careful when changing it! If you must add tests with square
dnl brackets, be sure changequote invocations surround it.
dnl
dnl
dnl v2.5 needed for --bindir et al
AC_PREREQ(2.59)
AC_INIT
AC_CONFIG_SRCDIR(as.h)
dnl Autoconf 2.57 will find the aux dir without this. However, unless
dnl we specify this explicitly, automake-1.7 will assume that ylwrap is in
dnl gas/ instead of gas/../.
AC_CONFIG_AUX_DIR(..)
AC_CANONICAL_TARGET
AC_ISC_POSIX
changequote(,)dnl
BFD_VERSION=`${srcdir}/../bfd/configure --version | sed -n -e '1s,.* ,,p'`
changequote([,])dnl
AM_INIT_AUTOMAKE(gas, ${BFD_VERSION})
AC_PROG_CC
AC_GNU_SOURCE
AC_USE_SYSTEM_EXTENSIONS
ACX_LARGEFILE
LT_INIT
AC_ARG_ENABLE(targets,
[ --enable-targets alternative target configurations besides the primary],
[case "${enableval}" in
yes | "") AC_MSG_ERROR(enable-targets option must specify target names or 'all')
;;
no) enable_targets= ;;
*) enable_targets=$enableval ;;
esac])dnl
ac_checking=yes
if grep '^RELEASE=y' ${srcdir}/../bfd/Makefile.am >/dev/null 2>/dev/null ; then
ac_checking=
fi
AC_ARG_ENABLE(checking,
[ --enable-checking enable run-time checks],
[case "${enableval}" in
no|none) ac_checking= ;;
*) ac_checking=yes ;;
esac])dnl
if test x$ac_checking != x ; then
AC_DEFINE(ENABLE_CHECKING, 1, [Define if you want run-time sanity checks.])
fi
using_cgen=no
AM_BINUTILS_WARNINGS
# Generate a header file
AC_CONFIG_HEADERS(config.h:config.in)
# PR 14072
AH_VERBATIM([00_CONFIG_H_CHECK],
[/* Check that config.h is #included before system headers
(this works only for glibc, but that should be enough). */
#if defined(__GLIBC__) && !defined(__CONFIG_H__)
# error config.h must be #included before system headers
#endif
#define __CONFIG_H__ 1])
# If we are on a DOS filesystem, we must use gdb.ini rather than
# .gdbinit.
case "${host}" in
*-*-msdos* | *-*-go32* | *-*-mingw32* | *-*-windows*)
GDBINIT="gdb.ini"
AC_CONFIG_FILES(gdb.ini:gdbinit.in)
;;
*)
GDBINIT=".gdbinit"
AC_CONFIG_FILES(.gdbinit:gdbinit.in)
;;
esac
AC_SUBST(GDBINIT)
#We need this for the host. BOUT header is in host order.
AC_C_BIGENDIAN
te_file=generic
# Makefile target for installing gas in $(tooldir)/bin.
install_tooldir=install-exec-tooldir
canon_targets=""
all_targets=no
if test -n "$enable_targets" ; then
for t in `echo $enable_targets | sed 's/,/ /g'`; do
if test $t = "all"; then
all_targets=yes
continue
fi
result=`$ac_config_sub $t 2>/dev/null`
if test -n "$result" ; then
canon_targets="$canon_targets $result"
# else
# # Permit "all", etc. We don't support it yet though.
# canon_targets="$canon_targets $t"
fi
done
GAS_UNIQ(canon_targets)
fi
emulations=""
for this_target in $target $canon_targets ; do
targ=${this_target}
. ${srcdir}/configure.tgt
case ${target_cpu} in
crisv32)
AC_DEFINE_UNQUOTED(DEFAULT_CRIS_ARCH, $arch,
[Default CRIS architecture.])
;;
esac
if test ${this_target} = $target ; then
target_cpu_type=${cpu_type}
elif test ${target_cpu_type} != ${cpu_type} ; then
continue
fi
generic_target=${cpu_type}-${target_vendor}-${target_os}
case ${generic_target} in
i386-*-sco3.2v5*)
if test ${this_target} = $target; then
AC_DEFINE(SCO_ELF, 1, [Define if defaulting to ELF on SCO 5.])
fi
;;
i386-*-msdosdjgpp* \
| i386-*-go32* \
| i386-go32-rtems*)
AC_DEFINE(STRICTCOFF, 1, [Using strict COFF?])
;;
i860-*-*)
AC_MSG_WARN(GAS support for ${generic_target} is preliminary and a work in progress)
;;
microblaze*)
;;
mips-sony-bsd*)
;;
mips-*-bsd*)
AC_MSG_ERROR(Unknown vendor for mips-bsd configuration.)
;;
changequote(,)dnl
ppc-*-aix[5-9].*)
changequote([,])dnl
AC_DEFINE(AIX_WEAK_SUPPORT, 1,
[Define if using AIX 5.2 value for C_WEAKEXT.])
;;
ppc-*-linux-*)
case "$endian" in
big) ;;
*) AC_MSG_ERROR(GNU/Linux must be configured big endian) ;;
esac
;;
ppc-*-solaris*)
if test ${this_target} = $target; then
AC_DEFINE(TARGET_SOLARIS_COMMENT, 1,
[Define if default target is PowerPC Solaris.])
fi
if test x${endian} = xbig; then
AC_MSG_ERROR(Solaris must be configured little endian)
fi
;;
sh*-*-symbianelf*)
AC_DEFINE(TARGET_SYMBIAN, 1, [Define if target is Symbian OS.])
;;
esac
if test ${this_target} = $target ; then
endian_def=
if test x${endian} = xbig; then
endian_def=1
elif test x${endian} = xlittle; then
endian_def=0
fi
if test x${endian_def} != x; then
AC_DEFINE_UNQUOTED(TARGET_BYTES_BIG_ENDIAN, $endian_def,
[Define as 1 if big endian.])
fi
fi
# Other random stuff.
case ${cpu_type} in
mips)
# Set mips_cpu to the name of the default CPU.
case ${target_cpu} in
mips | mipsbe | mipseb | mipsle | mipsel | mips64 | mips64el)
mips_cpu=from-abi
;;
mipsisa32 | mipsisa32el)
mips_cpu=mips32
;;
mipsisa32r2 | mipsisa32r2el)
mips_cpu=mips32r2
;;
mipsisa64 | mipsisa64el)
mips_cpu=mips64
;;
mipsisa64r2 | mipsisa64r2el)
mips_cpu=mips64r2
;;
mipstx39 | mipstx39el)
mips_cpu=r3900
;;
mips64vr | mips64vrel)
mips_cpu=vr4100
;;
mipsisa32r2* | mipsisa64r2*)
changequote(,)dnl
mips_cpu=`echo $target_cpu | sed -e 's/[a-z]*..r2//' -e 's/el$//'`
changequote([,])dnl
;;
mips64* | mipsisa64* | mipsisa32*)
changequote(,)dnl
mips_cpu=`echo $target_cpu | sed -e 's/[a-z]*..//' -e 's/el$//'`
changequote([,])dnl
;;
*)
AC_MSG_ERROR($target_cpu isn't a supported MIPS CPU name)
;;
esac
# See whether it's appropriate to set E_MIPS_ABI_O32 for o32
# binaries. It's a GNU extension that some OSes don't understand.
# The value only matters on ELF targets.
case ${target} in
*-*-irix*)
use_e_mips_abi_o32=0
;;
*)
use_e_mips_abi_o32=1
;;
esac
# Decide whether to generate 32-bit or 64-bit code by default.
# Used to resolve -march=from-abi when an embedded ABI is selected.
case ${target} in
mips64*-*-* | mipsisa64*-*-*)
mips_default_64bit=1
;;
*)
mips_default_64bit=0
;;
esac
# Decide which ABI to target by default.
case ${target} in
mips64*-linux* | mips-sgi-irix6* | mips64*-freebsd* | mips64*-kfreebsd*-gnu)
mips_default_abi=N32_ABI
;;
mips*-linux* | mips*-freebsd* | mips*-kfreebsd*-gnu)
mips_default_abi=O32_ABI
;;
mips64*-openbsd*)
mips_default_abi=N64_ABI
;;
*)
mips_default_abi=NO_ABI
;;
esac
AC_DEFINE_UNQUOTED(MIPS_CPU_STRING_DEFAULT, "$mips_cpu",
[Default CPU for MIPS targets. ])
AC_DEFINE_UNQUOTED(USE_E_MIPS_ABI_O32, $use_e_mips_abi_o32,
[Allow use of E_MIPS_ABI_O32 on MIPS targets. ])
AC_DEFINE_UNQUOTED(MIPS_DEFAULT_64BIT, $mips_default_64bit,
[Generate 64-bit code by default on MIPS targets. ])
AC_DEFINE_UNQUOTED(MIPS_DEFAULT_ABI, $mips_default_abi,
[Choose a default ABI for MIPS targets. ])
;;
esac
# Do we need the opcodes library?
case ${cpu_type} in
vax | tic30)
;;
*)
need_opcodes=yes
case "${enable_shared}" in
yes) shared_opcodes=true ;;
*opcodes*) shared_opcodes=true ;;
*) shared_opcodes=false ;;
esac
;;
esac
# Any other special object files needed ?
case ${cpu_type} in
bfin)
echo ${extra_objects} | grep -s "bfin-parse.o"
if test $? -ne 0 ; then
extra_objects="$extra_objects bfin-parse.o"
fi
echo ${extra_objects} | grep -s "bfin-lex-wrapper.o"
if test $? -ne 0 ; then
extra_objects="$extra_objects bfin-lex-wrapper.o"
fi
;;
epiphany | fr30 | ip2k | iq2000 | lm32 | m32r | openrisc)
using_cgen=yes
;;
m32c)
using_cgen=yes
;;
frv)
using_cgen=yes
;;
m68k)
case ${extra_objects} in
*m68k-parse.o*) ;;
*) extra_objects="$extra_objects m68k-parse.o" ;;
esac
;;
mep)
using_cgen=yes
;;
mips)
echo ${extra_objects} | grep -s "itbl-parse.o"
if test $? -ne 0 ; then
extra_objects="$extra_objects itbl-parse.o"
fi
echo ${extra_objects} | grep -s "itbl-lex-wrapper.o"
if test $? -ne 0 ; then
extra_objects="$extra_objects itbl-lex-wrapper.o"
fi
echo ${extra_objects} | grep -s "itbl-ops.o"
if test $? -ne 0 ; then
extra_objects="$extra_objects itbl-ops.o"
fi
;;
mt)
using_cgen=yes
;;
i386 | s390 | sparc)
if test $this_target = $target ; then
AC_DEFINE_UNQUOTED(DEFAULT_ARCH, "${arch}", [Default architecture.])
fi
;;
rl78)
echo ${extra_objects} | grep -s "rl78-parse.o"
if test $? -ne 0 ; then
extra_objects="$extra_objects rl78-parse.o"
fi
;;
rx)
echo ${extra_objects} | grep -s "rx-parse.o"
if test $? -ne 0 ; then
extra_objects="$extra_objects rx-parse.o"
fi
;;
xstormy16)
using_cgen=yes
;;
xc16x)
using_cgen=yes
;;
xtensa)
echo ${extra_objects} | grep -s "xtensa-relax.o"
if test $? -ne 0 ; then
extra_objects="$extra_objects xtensa-relax.o"
fi
;;
*)
;;
esac
if test $using_cgen = yes ; then
case "x${extra_objects}" in
*cgen.o*) ;;
*) extra_objects="$extra_objects cgen.o" ;;
esac
fi
# See if we really can support this configuration with the emulation code.
if test $this_target = $target ; then
obj_format=$fmt
te_file=$em
fi
case ${te_file} in
vms) extra_objects="$extra_objects te-vms.o" ;;
esac
# From target name and format, produce a list of supported emulations.
case ${generic_target}-${fmt} in
mips-*-irix5*-*) emulation="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;;
mips*-*-linux*-* | mips*-*-freebsd* | mips*-*-kfreebsd*-gnu)
case "$endian" in
big) emulation="mipsbelf mipslelf mipself" ;;
*) emulation="mipslelf mipsbelf mipself" ;;
esac ;;
mips-*-lnews*-ecoff) ;;
mips-*-*-ecoff) case "$endian" in
big) emulation="mipsbecoff mipslecoff mipsecoff" ;;
*) emulation="mipslecoff mipsbecoff mipsecoff" ;;
esac ;;
mips-*-*-elf) case "$endian" in
big) emulation="mipsbelf mipslelf mipself" ;;
*) emulation="mipslelf mipsbelf mipself" ;;
esac ;;
mips-*-sysv4*MP*-*) emulation="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;;
# i386-pc-pe-coff != i386-pc-coff.
i386-*-pe-coff) ;;
# Uncommenting the next line will turn on support for i386 AOUT
# for the default linux configuration
# i386-*-linux*-elf) emulation="i386elf i386aout" ;;
#
i386-*-aout) emulation="i386aout" ;;
i386-*-coff) emulation="i386coff" ;;
i386-*-elf) emulation="i386elf" ;;
# Always all formats. The first stated emulation becomes the default.
cris-*-*aout*) emulation="crisaout criself" ;;
cris-*-*) emulation="criself crisaout" ;;
esac
emulations="$emulations $emulation"
done
# Turn on all targets if possible
if test ${all_targets} = "yes"; then
case ${target_cpu_type} in
i386)
case ${obj_format} in
aout)
emulations="$emulations i386coff i386elf"
;;
coff)
emulations="$emulations i386aout i386elf"
;;
elf)
emulations="$emulations i386aout i386coff"
;;
esac
;;
x86_64)
case ${obj_format} in
aout)
emulations="$emulations i386coff i386elf"
;;
coff)
emulations="$emulations i386aout i386elf"
;;
elf)
emulations="$emulations i386aout i386coff"
;;
esac
;;
esac
fi
# PE code has way too many macros tweaking behaviour
case ${te_file} in
pe*) emulations="" ;;
esac
# Assign floating point type. Most processors with FP support
# IEEE FP. On those that don't support FP at all, usually IEEE
# is emulated.
case ${target_cpu} in
vax | pdp11 ) atof=vax ;;
*) atof=ieee ;;
esac
case "${obj_format}" in
"") AC_MSG_ERROR(GAS does not know what format to use for target ${target}) ;;
esac
# Unfortunately the cpu in cpu-opc.h file isn't always $(TARGET_CPU).
cgen_cpu_prefix=""
if test $using_cgen = yes ; then
case ${target_cpu} in
*) cgen_cpu_prefix=${target_cpu} ;;
esac
AC_SUBST(cgen_cpu_prefix)
AC_DEFINE(USING_CGEN, 1, [Using cgen code?])
fi
dnl
dnl Make sure the desired support files exist.
dnl
if test ! -r ${srcdir}/config/tc-${target_cpu_type}.c; then
AC_MSG_ERROR(GAS does not support target CPU ${target_cpu_type})
fi
if test ! -r ${srcdir}/config/obj-${obj_format}.c; then
AC_MSG_ERROR(GAS does not have support for object file format ${obj_format})
fi
# Some COFF configurations want these random other flags set.
case ${obj_format} in
coff)
case ${target_cpu_type} in
i386) AC_DEFINE(I386COFF, 1, [Using i386 COFF?]) ;;
m68k) AC_DEFINE(M68KCOFF, 1, [Using m68k COFF?]) ;;
m88k) AC_DEFINE(M88KCOFF, 1, [Using m88k COFF?]) ;;
x86_64) AC_DEFINE(I386COFF, 1, [Using i386 COFF?]) ;;
esac
;;
esac
# Getting this done right is going to be a bitch. Each configuration specified
# with --enable-targets=... should be checked for environment, format, cpu
# setting.
#
# For each configuration, the necessary object file support code must be linked
# in. This might be only one, it might be up to four. The necessary emulation
# code needs to be provided, too.
#
# And then there's "--enable-targets=all"....
#
# For now, just always do it for MIPS ELF or ECOFF configurations. Sigh.
formats="${obj_format}"
emfiles=""
EMULATIONS=""
GAS_UNIQ(emulations)
for em in . $emulations ; do
case $em in
.) continue ;;
mipsbelf | mipslelf | mipself)
fmt=elf file=mipself ;;
mipsbecoff | mipslecoff | mipsecoff)
fmt=ecoff file=mipsecoff ;;
*coff)
fmt=coff file=$em ;;
*aout)
fmt=aout file=$em ;;
*elf)
fmt=elf file=$em ;;
esac
formats="$formats $fmt"
emfiles="$emfiles e-$file.o"
EMULATIONS="$EMULATIONS &$em,"
done
GAS_UNIQ(formats)
GAS_UNIQ(emfiles)
if test `set . $formats ; shift ; echo $#` -gt 1 ; then
for fmt in $formats ; do
case $fmt in
aout) AC_DEFINE(OBJ_MAYBE_AOUT, 1, [a.out support?]) ;;
bout) AC_DEFINE(OBJ_MAYBE_BOUT, 1, [b.out support?]) ;;
coff) AC_DEFINE(OBJ_MAYBE_COFF, 1, [COFF support?]) ;;
ecoff) AC_DEFINE(OBJ_MAYBE_ECOFF, 1, [ECOFF support?]) ;;
elf) AC_DEFINE(OBJ_MAYBE_ELF, 1, [ELF support?]) ;;
generic) AC_DEFINE(OBJ_MAYBE_GENERIC, 1, [generic support?]) ;;
som) AC_DEFINE(OBJ_MAYBE_SOM, 1, [SOM support?]) ;;
esac
extra_objects="$extra_objects obj-$fmt.o"
done
obj_format=multi
fi
if test `set . $emfiles ; shift ; echo $#` -gt 0 ; then
DEFAULT_EMULATION=`set . $emulations ; echo $2`
# e-mips* has more than one emulation per file, e-i386* has just one at the
# moment. If only one emulation is specified, then don't define
# USE_EMULATIONS or include any of the e-files as they will only be bloat.
case "${obj_format}${emfiles}" in
multi* | *mips*)
extra_objects="$extra_objects $emfiles"
AC_DEFINE(USE_EMULATIONS, 1, [Use emulation support?]) ;;
esac
fi
AC_SUBST(extra_objects)
AC_DEFINE_UNQUOTED(EMULATIONS, $EMULATIONS, [Supported emulations.])
AC_DEFINE_UNQUOTED(DEFAULT_EMULATION, "$DEFAULT_EMULATION",
[Default emulation.])
reject_dev_configs=yes
case ${reject_dev_configs}-${dev} in
yes-yes) # Oops.
AC_MSG_ERROR(GAS does not support the ${generic_target} configuration.)
;;
esac
AC_SUBST(target_cpu_type)
AC_SUBST(obj_format)
AC_SUBST(te_file)
AC_SUBST(install_tooldir)
AC_SUBST(atof)
dnl AC_SUBST(emulation)
# do we need the opcodes library?
case "${need_opcodes}" in
yes)
OPCODES_LIB=../opcodes/libopcodes.la
;;
esac
AC_SUBST(OPCODES_LIB)
AC_DEFINE_UNQUOTED(TARGET_ALIAS, "${target_alias}", [Target alias.])
AC_DEFINE_UNQUOTED(TARGET_CANONICAL, "${target}", [Canonical target.])
AC_DEFINE_UNQUOTED(TARGET_CPU, "${target_cpu}", [Target CPU.])
AC_DEFINE_UNQUOTED(TARGET_VENDOR, "${target_vendor}", [Target vendor.])
AC_DEFINE_UNQUOTED(TARGET_OS, "${target_os}", [Target OS.])
AC_PROG_YACC
AM_PROG_LEX
ALL_LINGUAS="fr tr es rw id ru fi ja"
ZW_GNU_GETTEXT_SISTER_DIR
AM_PO_SUBDIRS
AM_MAINTAINER_MODE
AM_CONDITIONAL(GENINSRC_NEVER, false)
AC_EXEEXT
AC_CHECK_HEADERS(string.h stdlib.h memory.h strings.h unistd.h errno.h sys/types.h limits.h locale.h time.h sys/stat.h)
ACX_HEADER_STRING
# Put this here so that autoconf's "cross-compiling" message doesn't confuse
# people who are not cross-compiling but are compiling cross-assemblers.
AC_MSG_CHECKING(whether compiling a cross-assembler)
if test "${host}" = "${target}"; then
cross_gas=no
else
cross_gas=yes
AC_DEFINE(CROSS_COMPILE, 1, [Compiling cross-assembler?])
fi
AC_MSG_RESULT($cross_gas)
dnl ansidecl.h will deal with const
dnl AC_C_CONST
AC_FUNC_ALLOCA
AC_C_INLINE
# VMS doesn't have unlink.
AC_CHECK_FUNCS(unlink remove, break)
AC_CHECK_FUNCS(sbrk setlocale)
AM_LC_MESSAGES
# do we need the math library?
case "${need_libm}" in
yes)
LT_LIB_M
AC_SUBST(LIBM)
;;
esac
# Some non-ANSI preprocessors botch requoting inside strings. That's bad
# enough, but on some of those systems, the assert macro relies on requoting
# working properly!
GAS_WORKING_ASSERT
# On some systems, the system header files may not declare malloc, realloc,
# and free. There are places where gas needs these functions to have been
# declared -- such as when taking their addresses.
gas_test_headers="
#ifdef HAVE_MEMORY_H
#include <memory.h>
#endif
#ifdef HAVE_STRING_H
#include <string.h>
#else
#ifdef HAVE_STRINGS_H
#include <strings.h>
#endif
#endif
#ifdef HAVE_STDLIB_H
#include <stdlib.h>
#endif
#ifdef HAVE_UNISTD_H
#include <unistd.h>
#endif
"
# Does errno.h declare errno, or do we have to add a separate declaration
# for it?
GAS_CHECK_DECL_NEEDED(errno, f, int f, [
#ifdef HAVE_ERRNO_H
#include <errno.h>
#endif
])
AC_MSG_CHECKING(for a known getopt prototype in unistd.h)
AC_CACHE_VAL(gas_cv_decl_getopt_unistd_h,
[AC_COMPILE_IFELSE([AC_LANG_PROGRAM([#include <unistd.h>], [extern int getopt (int, char *const*, const char *);])],
gas_cv_decl_getopt_unistd_h=yes, gas_cv_decl_getopt_unistd_h=no)])
AC_MSG_RESULT($gas_cv_decl_getopt_unistd_h)
if test $gas_cv_decl_getopt_unistd_h = yes; then
AC_DEFINE([HAVE_DECL_GETOPT], 1,
[Is the prototype for getopt in <unistd.h> in the expected format?])
fi
GAS_CHECK_DECL_NEEDED(environ, f, char **f, $gas_test_headers)
GAS_CHECK_DECL_NEEDED(ffs, f, int (*f)(int), $gas_test_headers)
GAS_CHECK_DECL_NEEDED(free, f, void (*f)(), $gas_test_headers)
GAS_CHECK_DECL_NEEDED(malloc, f, char *(*f)(), $gas_test_headers)
GAS_CHECK_DECL_NEEDED(sbrk, f, char *(*f)(), $gas_test_headers)
GAS_CHECK_DECL_NEEDED(strstr, f, char *(*f)(), $gas_test_headers)
AC_CHECK_DECLS([free, getenv, malloc, mempcpy, realloc, stpcpy, strstr, vsnprintf])
BFD_BINARY_FOPEN
# Link in zlib if we can. This allows us to write compressed debug sections.
AM_ZLIB
# Support for VMS timestamps via cross compile
if test "$ac_cv_header_time_h" = yes; then
GAS_HAVE_TIME_TYPE_MEMBER(struct tm, tm_gmtoff)
fi
if test "$ac_cv_header_sys_stat_h" = yes; then
GAS_HAVE_SYS_STAT_TYPE_MEMBER(struct stat, st_mtim, tv_sec)
GAS_HAVE_SYS_STAT_TYPE_MEMBER(struct stat, st_mtim, tv_nsec)
fi
dnl Required for html, pdf, install-pdf and install-html targets.
AC_SUBST(datarootdir)
AC_SUBST(docdir)
AC_SUBST(htmldir)
AC_SUBST(pdfdir)
dnl This must come last.
dnl We used to make symlinks to files in the source directory, but now
dnl we just use the right name for .c files, and create .h files in
dnl the build directory which include the right .h file. Make sure
dnl the old symlinks don't exist, so that a reconfigure in an existing
dnl directory behaves reasonably.
AC_CONFIG_FILES(Makefile doc/Makefile po/Makefile.in:po/Make-in)
AC_CONFIG_COMMANDS([default],
[rm -f targ-cpu.c targ-cpu.h obj-format.h obj-format.c targ-env.h atof-targ.c itbl-cpu.h
echo '#include "tc-'"${target_cpu_type}"'.h"' > targ-cpu.h
echo '#include "obj-'"${obj_format}"'.h"' > obj-format.h
echo '#include "te-'"${te_file}"'.h"' > targ-env.h
echo '#include "itbl-'"${target_cpu_type}"'.h"' > itbl-cpu.h
if test "x$cgen_cpu_prefix" != x ; then
echo '#include "opcodes/'"${cgen_cpu_prefix}"'-desc.h"' > cgen-desc.h
fi],
[target_cpu_type=${target_cpu_type}
cgen_cpu_prefix=${cgen_cpu_prefix}
obj_format=${obj_format}
te_file=${te_file}])
AC_OUTPUT