379 lines
14 KiB
C
379 lines
14 KiB
C
/* Opcode table header for m680[01234]0/m6888[12]/m68851.
|
|
Copyright 1989, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1999, 2001,
|
|
2003, 2004, 2006 Free Software Foundation, Inc.
|
|
|
|
This file is part of GDB, GAS, and the GNU binutils.
|
|
|
|
GDB, GAS, and the GNU binutils are free software; you can redistribute
|
|
them and/or modify them under the terms of the GNU General Public
|
|
License as published by the Free Software Foundation; either version
|
|
1, or (at your option) any later version.
|
|
|
|
GDB, GAS, and the GNU binutils are distributed in the hope that they
|
|
will be useful, but WITHOUT ANY WARRANTY; without even the implied
|
|
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
|
|
the GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this file; see the file COPYING. If not, write to the Free
|
|
Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA
|
|
02110-1301, USA. */
|
|
|
|
/* These are used as bit flags for the arch field in the m68k_opcode
|
|
structure. */
|
|
#define _m68k_undef 0
|
|
#define m68000 0x001
|
|
#define m68010 0x002
|
|
#define m68020 0x004
|
|
#define m68030 0x008
|
|
#define m68040 0x010
|
|
#define m68060 0x020
|
|
#define m68881 0x040
|
|
#define m68851 0x080
|
|
#define cpu32 0x100 /* e.g., 68332 */
|
|
#define fido_a 0x200
|
|
#define m68k_mask 0x3ff
|
|
|
|
#define mcfmac 0x400 /* ColdFire MAC. */
|
|
#define mcfemac 0x800 /* ColdFire EMAC. */
|
|
#define cfloat 0x1000 /* ColdFire FPU. */
|
|
#define mcfhwdiv 0x2000 /* ColdFire hardware divide. */
|
|
|
|
#define mcfisa_a 0x4000 /* ColdFire ISA_A. */
|
|
#define mcfisa_aa 0x8000 /* ColdFire ISA_A+. */
|
|
#define mcfisa_b 0x10000 /* ColdFire ISA_B. */
|
|
#define mcfisa_c 0x20000 /* ColdFire ISA_C. */
|
|
#define mcfusp 0x40000 /* ColdFire USP instructions. */
|
|
#define mcf_mask 0x7e400
|
|
|
|
/* Handy aliases. */
|
|
#define m68040up (m68040 | m68060)
|
|
#define m68030up (m68030 | m68040up)
|
|
#define m68020up (m68020 | m68030up)
|
|
#define m68010up (m68010 | cpu32 | fido_a | m68020up)
|
|
#define m68000up (m68000 | m68010up)
|
|
|
|
#define mfloat (m68881 | m68040 | m68060)
|
|
#define mmmu (m68851 | m68030 | m68040 | m68060)
|
|
|
|
/* The structure used to hold information for an opcode. */
|
|
|
|
struct m68k_opcode
|
|
{
|
|
/* The opcode name. */
|
|
const char *name;
|
|
/* The pseudo-size of the instruction(in bytes). Used to determine
|
|
number of bytes necessary to disassemble the instruction. */
|
|
unsigned int size;
|
|
/* The opcode itself. */
|
|
unsigned long opcode;
|
|
/* The mask used by the disassembler. */
|
|
unsigned long match;
|
|
/* The arguments. */
|
|
const char *args;
|
|
/* The architectures which support this opcode. */
|
|
unsigned int arch;
|
|
};
|
|
|
|
/* The structure used to hold information for an opcode alias. */
|
|
|
|
struct m68k_opcode_alias
|
|
{
|
|
/* The alias name. */
|
|
const char *alias;
|
|
/* The instruction for which this is an alias. */
|
|
const char *primary;
|
|
};
|
|
|
|
/* We store four bytes of opcode for all opcodes because that is the
|
|
most any of them need. The actual length of an instruction is
|
|
always at least 2 bytes, and is as much longer as necessary to hold
|
|
the operands it has.
|
|
|
|
The match field is a mask saying which bits must match particular
|
|
opcode in order for an instruction to be an instance of that
|
|
opcode.
|
|
|
|
The args field is a string containing two characters for each
|
|
operand of the instruction. The first specifies the kind of
|
|
operand; the second, the place it is stored.
|
|
|
|
If the first char of args is '.', it indicates that the opcode is
|
|
two words. This is only necessary when the match field does not
|
|
have any bits set in the second opcode word. Such a '.' is skipped
|
|
for operand processing. */
|
|
|
|
/* Kinds of operands:
|
|
Characters used: AaBbCcDdEeFfGgHIiJjKkLlMmnOopQqRrSsTtUuVvWwXxYyZz01234|*~%;@!&$?/<>#^+-
|
|
|
|
D data register only. Stored as 3 bits.
|
|
A address register only. Stored as 3 bits.
|
|
a address register indirect only. Stored as 3 bits.
|
|
R either kind of register. Stored as 4 bits.
|
|
r either kind of register indirect only. Stored as 4 bits.
|
|
At the moment, used only for cas2 instruction.
|
|
F floating point coprocessor register only. Stored as 3 bits.
|
|
O an offset (or width): immediate data 0-31 or data register.
|
|
Stored as 6 bits in special format for BF... insns.
|
|
+ autoincrement only. Stored as 3 bits (number of the address register).
|
|
- autodecrement only. Stored as 3 bits (number of the address register).
|
|
Q quick immediate data. Stored as 3 bits.
|
|
This matches an immediate operand only when value is in range 1 .. 8.
|
|
M moveq immediate data. Stored as 8 bits.
|
|
This matches an immediate operand only when value is in range -128..127
|
|
T trap vector immediate data. Stored as 4 bits.
|
|
|
|
k K-factor for fmove.p instruction. Stored as a 7-bit constant or
|
|
a three bit register offset, depending on the field type.
|
|
|
|
# immediate data. Stored in special places (b, w or l)
|
|
which say how many bits to store.
|
|
^ immediate data for floating point instructions. Special places
|
|
are offset by 2 bytes from '#'...
|
|
B pc-relative address, converted to an offset
|
|
that is treated as immediate data.
|
|
d displacement and register. Stores the register as 3 bits
|
|
and stores the displacement in the entire second word.
|
|
|
|
C the CCR. No need to store it; this is just for filtering validity.
|
|
S the SR. No need to store, just as with CCR.
|
|
U the USP. No need to store, just as with CCR.
|
|
E the MAC ACC. No need to store, just as with CCR.
|
|
e the EMAC ACC[0123].
|
|
G the MAC/EMAC MACSR. No need to store, just as with CCR.
|
|
g the EMAC ACCEXT{01,23}.
|
|
H the MASK. No need to store, just as with CCR.
|
|
i the MAC/EMAC scale factor.
|
|
|
|
I Coprocessor ID. Not printed if 1. The Coprocessor ID is always
|
|
extracted from the 'd' field of word one, which means that an extended
|
|
coprocessor opcode can be skipped using the 'i' place, if needed.
|
|
|
|
s System Control register for the floating point coprocessor.
|
|
|
|
J Misc register for movec instruction, stored in 'j' format.
|
|
Possible values:
|
|
0x000 SFC Source Function Code reg [60, 40, 30, 20, 10]
|
|
0x001 DFC Data Function Code reg [60, 40, 30, 20, 10]
|
|
0x002 CACR Cache Control Register [60, 40, 30, 20, mcf]
|
|
0x003 TC MMU Translation Control [60, 40]
|
|
0x004 ITT0 Instruction Transparent
|
|
Translation reg 0 [60, 40]
|
|
0x005 ITT1 Instruction Transparent
|
|
Translation reg 1 [60, 40]
|
|
0x006 DTT0 Data Transparent
|
|
Translation reg 0 [60, 40]
|
|
0x007 DTT1 Data Transparent
|
|
Translation reg 1 [60, 40]
|
|
0x008 BUSCR Bus Control Register [60]
|
|
0x800 USP User Stack Pointer [60, 40, 30, 20, 10]
|
|
0x801 VBR Vector Base reg [60, 40, 30, 20, 10, mcf]
|
|
0x802 CAAR Cache Address Register [ 30, 20]
|
|
0x803 MSP Master Stack Pointer [ 40, 30, 20]
|
|
0x804 ISP Interrupt Stack Pointer [ 40, 30, 20]
|
|
0x805 MMUSR MMU Status reg [ 40]
|
|
0x806 URP User Root Pointer [60, 40]
|
|
0x807 SRP Supervisor Root Pointer [60, 40]
|
|
0x808 PCR Processor Configuration reg [60]
|
|
0xC00 ROMBAR ROM Base Address Register [520X]
|
|
0xC04 RAMBAR0 RAM Base Address Register 0 [520X]
|
|
0xC05 RAMBAR1 RAM Base Address Register 0 [520X]
|
|
0xC0F MBAR0 RAM Base Address Register 0 [520X]
|
|
0xC04 FLASHBAR FLASH Base Address Register [mcf528x]
|
|
0xC05 RAMBAR Static RAM Base Address Register [mcf528x]
|
|
|
|
L Register list of the type d0-d7/a0-a7 etc.
|
|
(New! Improved! Can also hold fp0-fp7, as well!)
|
|
The assembler tries to see if the registers match the insn by
|
|
looking at where the insn wants them stored.
|
|
|
|
l Register list like L, but with all the bits reversed.
|
|
Used for going the other way. . .
|
|
|
|
c cache identifier which may be "nc" for no cache, "ic"
|
|
for instruction cache, "dc" for data cache, or "bc"
|
|
for both caches. Used in cinv and cpush. Always
|
|
stored in position "d".
|
|
|
|
u Any register, with ``upper'' or ``lower'' specification. Used
|
|
in the mac instructions with size word.
|
|
|
|
The remainder are all stored as 6 bits using an address mode and a
|
|
register number; they differ in which addressing modes they match.
|
|
|
|
* all (modes 0-6,7.0-4)
|
|
~ alterable memory (modes 2-6,7.0,7.1)
|
|
(not 0,1,7.2-4)
|
|
% alterable (modes 0-6,7.0,7.1)
|
|
(not 7.2-4)
|
|
; data (modes 0,2-6,7.0-4)
|
|
(not 1)
|
|
@ data, but not immediate (modes 0,2-6,7.0-3)
|
|
(not 1,7.4)
|
|
! control (modes 2,5,6,7.0-3)
|
|
(not 0,1,3,4,7.4)
|
|
& alterable control (modes 2,5,6,7.0,7.1)
|
|
(not 0,1,3,4,7.2-4)
|
|
$ alterable data (modes 0,2-6,7.0,7.1)
|
|
(not 1,7.2-4)
|
|
? alterable control, or data register (modes 0,2,5,6,7.0,7.1)
|
|
(not 1,3,4,7.2-4)
|
|
/ control, or data register (modes 0,2,5,6,7.0-3)
|
|
(not 1,3,4,7.4)
|
|
> *save operands (modes 2,4,5,6,7.0,7.1)
|
|
(not 0,1,3,7.2-4)
|
|
< *restore operands (modes 2,3,5,6,7.0-3)
|
|
(not 0,1,4,7.4)
|
|
|
|
coldfire move operands:
|
|
m (modes 0-4)
|
|
n (modes 5,7.2)
|
|
o (modes 6,7.0,7.1,7.3,7.4)
|
|
p (modes 0-5)
|
|
|
|
coldfire bset/bclr/btst/mulsl/mulul operands:
|
|
q (modes 0,2-5)
|
|
v (modes 0,2-5,7.0,7.1)
|
|
b (modes 0,2-5,7.2)
|
|
w (modes 2-5,7.2)
|
|
y (modes 2,5)
|
|
z (modes 2,5,7.2)
|
|
x mov3q immediate operand.
|
|
j coprocessor ET operand.
|
|
K coprocessor command number.
|
|
4 (modes 2,3,4,5)
|
|
*/
|
|
|
|
/* For the 68851: */
|
|
/* I didn't use much imagination in choosing the
|
|
following codes, so many of them aren't very
|
|
mnemonic. -rab
|
|
|
|
0 32 bit pmmu register
|
|
Possible values:
|
|
000 TC Translation Control Register (68030, 68851)
|
|
|
|
1 16 bit pmmu register
|
|
111 AC Access Control (68851)
|
|
|
|
2 8 bit pmmu register
|
|
100 CAL Current Access Level (68851)
|
|
101 VAL Validate Access Level (68851)
|
|
110 SCC Stack Change Control (68851)
|
|
|
|
3 68030-only pmmu registers (32 bit)
|
|
010 TT0 Transparent Translation reg 0
|
|
(aka Access Control reg 0 -- AC0 -- on 68ec030)
|
|
011 TT1 Transparent Translation reg 1
|
|
(aka Access Control reg 1 -- AC1 -- on 68ec030)
|
|
|
|
W wide pmmu registers
|
|
Possible values:
|
|
001 DRP Dma Root Pointer (68851)
|
|
010 SRP Supervisor Root Pointer (68030, 68851)
|
|
011 CRP Cpu Root Pointer (68030, 68851)
|
|
|
|
f function code register (68030, 68851)
|
|
0 SFC
|
|
1 DFC
|
|
|
|
V VAL register only (68851)
|
|
|
|
X BADx, BACx (16 bit)
|
|
100 BAD Breakpoint Acknowledge Data (68851)
|
|
101 BAC Breakpoint Acknowledge Control (68851)
|
|
|
|
Y PSR (68851) (MMUSR on 68030) (ACUSR on 68ec030)
|
|
Z PCSR (68851)
|
|
|
|
| memory (modes 2-6, 7.*)
|
|
|
|
t address test level (68030 only)
|
|
Stored as 3 bits, range 0-7.
|
|
Also used for breakpoint instruction now.
|
|
|
|
*/
|
|
|
|
/* Places to put an operand, for non-general operands:
|
|
Characters used: BbCcDdFfGgHhIijkLlMmNnostWw123456789/
|
|
|
|
s source, low bits of first word.
|
|
d dest, shifted 9 in first word
|
|
1 second word, shifted 12
|
|
2 second word, shifted 6
|
|
3 second word, shifted 0
|
|
4 third word, shifted 12
|
|
5 third word, shifted 6
|
|
6 third word, shifted 0
|
|
7 second word, shifted 7
|
|
8 second word, shifted 10
|
|
9 second word, shifted 5
|
|
E second word, shifted 9
|
|
D store in both place 1 and place 3; for divul and divsl.
|
|
B first word, low byte, for branch displacements
|
|
W second word (entire), for branch displacements
|
|
L second and third words (entire), for branch displacements
|
|
(also overloaded for move16)
|
|
b second word, low byte
|
|
w second word (entire) [variable word/long branch offset for dbra]
|
|
W second word (entire) (must be signed 16 bit value)
|
|
l second and third word (entire)
|
|
g variable branch offset for bra and similar instructions.
|
|
The place to store depends on the magnitude of offset.
|
|
t store in both place 7 and place 8; for floating point operations
|
|
c branch offset for cpBcc operations.
|
|
The place to store is word two if bit six of word one is zero,
|
|
and words two and three if bit six of word one is one.
|
|
i Increment by two, to skip over coprocessor extended operands. Only
|
|
works with the 'I' format.
|
|
k Dynamic K-factor field. Bits 6-4 of word 2, used as a register number.
|
|
Also used for dynamic fmovem instruction.
|
|
C floating point coprocessor constant - 7 bits. Also used for static
|
|
K-factors...
|
|
j Movec register #, stored in 12 low bits of second word.
|
|
m For M[S]ACx; 4 bits split with MSB shifted 6 bits in first word
|
|
and remaining 3 bits of register shifted 9 bits in first word.
|
|
Indicate upper/lower in 1 bit shifted 7 bits in second word.
|
|
Use with `R' or `u' format.
|
|
n `m' withouth upper/lower indication. (For M[S]ACx; 4 bits split
|
|
with MSB shifted 6 bits in first word and remaining 3 bits of
|
|
register shifted 9 bits in first word. No upper/lower
|
|
indication is done.) Use with `R' or `u' format.
|
|
o For M[S]ACw; 4 bits shifted 12 in second word (like `1').
|
|
Indicate upper/lower in 1 bit shifted 7 bits in second word.
|
|
Use with `R' or `u' format.
|
|
M For M[S]ACw; 4 bits in low bits of first word. Indicate
|
|
upper/lower in 1 bit shifted 6 bits in second word. Use with
|
|
`R' or `u' format.
|
|
N For M[S]ACw; 4 bits in low bits of second word. Indicate
|
|
upper/lower in 1 bit shifted 6 bits in second word. Use with
|
|
`R' or `u' format.
|
|
h shift indicator (scale factor), 1 bit shifted 10 in second word
|
|
|
|
Places to put operand, for general operands:
|
|
d destination, shifted 6 bits in first word
|
|
b source, at low bit of first word, and immediate uses one byte
|
|
w source, at low bit of first word, and immediate uses two bytes
|
|
l source, at low bit of first word, and immediate uses four bytes
|
|
s source, at low bit of first word.
|
|
Used sometimes in contexts where immediate is not allowed anyway.
|
|
f single precision float, low bit of 1st word, immediate uses 4 bytes
|
|
F double precision float, low bit of 1st word, immediate uses 8 bytes
|
|
x extended precision float, low bit of 1st word, immediate uses 12 bytes
|
|
p packed float, low bit of 1st word, immediate uses 12 bytes
|
|
G EMAC accumulator, load (bit 4 2nd word, !bit8 first word)
|
|
H EMAC accumulator, non load (bit 4 2nd word, bit 8 first word)
|
|
F EMAC ACCx
|
|
f EMAC ACCy
|
|
I MAC/EMAC scale factor
|
|
/ Like 's', but set 2nd word, bit 5 if trailing_ampersand set
|
|
] first word, bit 10
|
|
*/
|
|
|
|
extern const struct m68k_opcode m68k_opcodes[];
|
|
extern const struct m68k_opcode_alias m68k_opcode_aliases[];
|
|
|
|
extern const int m68k_numopcodes, m68k_numaliases;
|
|
|
|
/* end of m68k-opcode.h */
|