binutils-gdb/gdb/testsuite/gdb.base/foll-fork.exp

413 lines
13 KiB
Plaintext

# Copyright 1997-2015 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# Until "set follow-fork-mode" and "catch fork" are implemented on
# other targets...
#
if { ![istarget "hppa*-hp-hpux*"] && ![istarget "*-*-linux*"]
&& ![istarget "*-*-openbsd*"] } then {
continue
}
standard_testfile
if {[prepare_for_testing $testfile.exp $testfile $srcfile debug]} {
untested $testfile.exp
return -1
}
proc check_fork_catchpoints {} {
global gdb_prompt
# Verify that the system supports "catch fork".
gdb_test "catch fork" "Catchpoint \[0-9\]* \\(fork\\)" "insert first fork catchpoint"
set has_fork_catchpoints 0
gdb_test_multiple "continue" "continue to first fork catchpoint" {
-re ".*Your system does not support this type\r\nof catchpoint.*$gdb_prompt $" {
unsupported "continue to first fork catchpoint"
}
-re ".*Catchpoint.*$gdb_prompt $" {
set has_fork_catchpoints 1
pass "continue to first fork catchpoint"
}
}
if {$has_fork_catchpoints == 0} {
unsupported "fork catchpoints"
return -code return
}
}
# Test follow-fork to ensure that the correct process is followed, that
# the followed process stops where it is expected to stop, that processes
# are detached (or not) as expected, and that the inferior list has the
# expected contents after following the fork. WHO is the argument to
# the 'set follow-fork-mode' command, DETACH is the argument to the
# 'set detach-on-fork' command, and CMD is the GDB command used to
# execute the program past the fork. If the value of WHO or DETACH is
# 'default', the corresponding GDB command is skipped for that test.
# The value of CMD must be either 'next 2' or 'continue'.
proc test_follow_fork { who detach cmd } {
global gdb_prompt
global srcfile
global testfile
with_test_prefix "follow $who, detach $detach, command \"$cmd\"" {
# Start a new debugger session each time so defaults are legitimate.
clean_restart $testfile
if ![runto_main] {
untested "could not run to main"
return -1
}
# The "Detaching..." and "Attaching..." messages may be hidden by
# default.
gdb_test_no_output "set verbose"
# Set follow-fork-mode if we aren't using the default.
if {$who == "default"} {
set who "parent"
} else {
gdb_test_no_output "set follow-fork $who"
}
gdb_test "show follow-fork" \
"Debugger response to a program call of fork or vfork is \"$who\"." \
"show follow-fork"
# Set detach-on-fork mode if we aren't using the default.
if {$detach == "default"} {
set detach "on"
} else {
gdb_test_no_output "set detach-on-fork $detach"
}
gdb_test "show detach-on-fork" \
"Whether gdb will detach.* fork is $detach." \
"show detach-on-fork"
# Set a breakpoint after the fork if we aren't single-stepping
# past the fork.
if {$cmd == "continue"} {
set bp_after_fork [gdb_get_line_number "set breakpoint here"]
gdb_test "break ${srcfile}:$bp_after_fork" \
"Breakpoint.*, line $bp_after_fork.*" \
"set breakpoint after fork"
}
# Set up the output we expect to see after we run.
set expected_re ""
if {$who == "child"} {
set expected_re "Attaching after.* fork to.*"
if {$detach == "on"} {
append expected_re "Detaching after fork from .*"
}
append expected_re "set breakpoint here.*"
} elseif {$who == "parent" && $detach == "on"} {
set expected_re "Detaching after fork from .*set breakpoint here.*"
} else {
set expected_re ".*set breakpoint here.*"
}
# Test running past and following the fork, using the parameters
# set above.
gdb_test $cmd $expected_re "$cmd past fork"
# Check that we have the inferiors arranged correctly after
# following the fork.
set resume_unfollowed 0
if {$who == "parent" && $detach == "on"} {
# Follow parent / detach child: the only inferior is the parent.
gdb_test "info inferiors" "\\* 1 .* process.*" \
"info inferiors"
} elseif {$who == "parent" && $detach == "off"} {
# Follow parent / keep child: two inferiors under debug, the
# parent is the current inferior.
gdb_test "info inferiors" "\\* 1 .*process.* 2 .*process.*" \
"info inferiors"
gdb_test "inferior 2" "Switching to inferior 2 .*"
set resume_unfollowed 1
} elseif {$who == "child" && $detach == "on"} {
# Follow child / detach parent: the child is under debug and is
# the current inferior. The parent is listed but is not under
# debug.
gdb_test "info inferiors" " 1 .*<null>.*\\* 2 .*process.*" \
"info inferiors"
} elseif {$who == "child" && $detach == "off"} {
# Follow child / keep parent: two inferiors under debug, the
# child is the current inferior.
gdb_test "info inferiors" " 1 .*process.*\\* 2 .*process.*" \
"info inferiors"
gdb_test "inferior 1" "Switching to inferior 1 .*"
set resume_unfollowed 1
}
if {$resume_unfollowed == 1} {
if {$cmd == "next 2"} {
gdb_continue_to_end "continue unfollowed inferior to end"
} elseif {$cmd == "continue"} {
gdb_continue_to_breakpoint \
"continue unfollowed inferior to bp" \
".* set breakpoint here.*"
}
}
}
}
proc catch_fork_child_follow {} {
global gdb_prompt
global srcfile
set bp_after_fork [gdb_get_line_number "set breakpoint here"]
gdb_test "catch fork" "Catchpoint \[0-9\]* \\(fork\\)" \
"explicit child follow, set catch fork"
# Verify that the catchpoint is mentioned in an "info breakpoints",
# and further that the catchpoint mentions no process id.
#
set test_name "info shows catchpoint without pid"
gdb_test_multiple "info breakpoints" "$test_name" {
-re ".*catchpoint.*keep y.*fork\[\r\n\]+$gdb_prompt $" {
pass "$test_name"
}
}
gdb_test "continue" \
"Catchpoint \[0-9\]* \\(forked process \[0-9\]*\\),.*" \
"explicit child follow, catch fork"
# Verify that the catchpoint is mentioned in an "info breakpoints",
# and further that the catchpoint managed to capture a process id.
#
set test_name "info shows catchpoint without pid"
gdb_test_multiple "info breakpoints" "$test_name" {
-re ".*catchpoint.*keep y.*fork, process.*$gdb_prompt $" {
pass "$test_name"
}
}
gdb_test_no_output "set follow-fork child"
gdb_test "tbreak ${srcfile}:$bp_after_fork" \
"Temporary breakpoint.*, line $bp_after_fork.*" \
"set follow-fork child, tbreak"
set expected_re "Attaching after.* fork to.*Detaching after fork from"
append expected_re ".* at .*$bp_after_fork.*"
gdb_test "continue" $expected_re "set follow-fork child, hit tbreak"
# The parent has been detached; allow time for any output it might
# generate to arrive, so that output doesn't get confused with
# any expected debugger output from a subsequent testpoint.
#
exec sleep 1
gdb_test "delete breakpoints" \
"" \
"set follow-fork child, cleanup" \
"Delete all breakpoints. \\(y or n\\) $" \
"y"
}
proc catch_fork_unpatch_child {} {
global gdb_prompt
global srcfile
set bp_exit [gdb_get_line_number "at exit"]
gdb_test "break callee" "file .*$srcfile, line .*" \
"unpatch child, break at callee"
gdb_test "catch fork" "Catchpoint \[0-9\]* \\(fork\\)" \
"unpatch child, set catch fork"
gdb_test "continue" \
"Catchpoint \[0-9\]* \\(forked process \[0-9\]*\\),.*" \
"unpatch child, catch fork"
# Delete all breakpoints and catchpoints.
delete_breakpoints
# Force $srcfile as the current GDB source can be in glibc sourcetree.
gdb_test "break $srcfile:$bp_exit" \
"Breakpoint .*file .*$srcfile, line .*" \
"unpatch child, breakpoint at exit call"
gdb_test_no_output "set follow-fork child" \
"unpatch child, set follow-fork child"
set test "unpatch child, unpatched parent breakpoints from child"
gdb_test_multiple "continue" $test {
-re "at exit.*$gdb_prompt $" {
pass "$test"
}
-re "SIGTRAP.*$gdb_prompt $" {
fail "$test"
# Explicitly kill this child, so we can continue gracefully
# with further testing...
send_gdb "kill\n"
gdb_expect {
-re ".*Kill the program being debugged.*y or n. $" {
send_gdb "y\n"
gdb_expect -re "$gdb_prompt $" {}
}
}
}
}
}
proc tcatch_fork_parent_follow {} {
global gdb_prompt
global srcfile
set bp_after_fork [gdb_get_line_number "set breakpoint here"]
gdb_test "catch fork" "Catchpoint \[0-9\]* \\(fork\\)" \
"explicit parent follow, set tcatch fork"
# ??rehrauer: I don't yet know how to get the id of the tcatch
# via this script, so that I can add a -do list to it. For now,
# do the follow stuff after the catch happens.
gdb_test "continue" \
"Catchpoint \[0-9\]* \\(forked process \[0-9\]*\\),.*" \
"explicit parent follow, tcatch fork"
gdb_test_no_output "set follow-fork parent"
gdb_test "tbreak ${srcfile}:$bp_after_fork" \
"Temporary breakpoint.*, line $bp_after_fork.*" \
"set follow-fork parent, tbreak"
gdb_test "continue" \
"Detaching after fork from.* at .*$bp_after_fork.*" \
"set follow-fork parent, hit tbreak"
# The child has been detached; allow time for any output it might
# generate to arrive, so that output doesn't get confused with
# any expected debugger output from a subsequent testpoint.
#
exec sleep 1
gdb_test "delete breakpoints" \
"" \
"set follow-fork parent, cleanup" \
"Delete all breakpoints. \\(y or n\\) $" \
"y"
}
proc do_fork_tests {} {
global gdb_prompt
global testfile
# Verify that help is available for "set follow-fork-mode".
#
gdb_test "help set follow-fork-mode" \
"Set debugger response to a program call of fork or vfork..*
A fork or vfork creates a new process. follow-fork-mode can be:.*
.*parent - the original process is debugged after a fork.*
.*child - the new process is debugged after a fork.*
The unfollowed process will continue to run..*
By default, the debugger will follow the parent process..*" \
"help set follow-fork"
# Verify that we can set follow-fork-mode, using an abbreviation
# for both the flag and its value.
#
gdb_test_no_output "set follow-fork ch"
gdb_test "show follow-fork" \
"Debugger response to a program call of fork or vfork is \"child\".*" \
"set follow-fork, using abbreviations"
# Verify that we cannot set follow-fork-mode to nonsense.
#
gdb_test "set follow-fork chork" "Undefined item: \"chork\".*" \
"set follow-fork to nonsense is prohibited"
gdb_test_no_output "set follow-fork parent" "reset parent"
# Check that fork catchpoints are supported, as an indicator for whether
# fork-following is supported.
if [runto_main] then { check_fork_catchpoints }
# Test the basic follow-fork functionality using all combinations of
# values for follow-fork-mode and detach-on-fork, using either a
# breakpoint or single-step to execute past the fork.
#
# The first loop should be sufficient to test the defaults. There
# is no need to test using the defaults in other permutations (e.g.
# "default" "on", "parent" "default", etc.).
foreach cmd {"next 2" "continue"} {
test_follow_fork "default" "default" $cmd
}
# Now test all explicit permutations.
foreach who {"parent" "child"} {
foreach detach {"on" "off"} {
foreach cmd {"next 2" "continue"} {
test_follow_fork $who $detach $cmd
}
}
}
# Catchpoint tests.
# Restart to eliminate any effects of the follow-fork tests.
clean_restart $testfile
gdb_test_no_output "set verbose"
# Test the ability to catch a fork, specify that the child be
# followed, and continue. Make the catchpoint permanent.
#
if [runto_main] then { catch_fork_child_follow }
# Test that parent breakpoints are successfully detached from the
# child at fork time, even if the user removes them from the
# breakpoints list after stopping at a fork catchpoint.
if [runto_main] then { catch_fork_unpatch_child }
# Test the ability to catch a fork, specify via a -do clause that
# the parent be followed, and continue. Make the catchpoint temporary.
#
if [runto_main] then { tcatch_fork_parent_follow }
}
# The "Detaching..." and "Attaching..." messages may be hidden by
# default.
gdb_test_no_output "set verbose"
# This is a test of gdb's ability to follow the parent, child or both
# parent and child of a Unix fork() system call.
#
do_fork_tests
return 0