OpenE2K/binutils-gdb
12
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
4f5376b2eb
binutils-gdb/gdb/rs6000-tdep.c
Pedro Alves 63807e1d0d Silence a few -Wmissing-prototypes warnings. 
PR build/9877:
        * alpha-linux-tdep.c (alpha_linux_regset_from_core_section): Make
	it static.
        * alpha-osf1-tdep.c (_initialize_alpha_osf1_tdep): Declare.
        * amd64fbsd-tdep.c (amd64fbsd_init_abi): Make it static.
        * amd64nbsd-tdep.c (_initialize_amd64nbsd_ndep): Rename to ...
	(_initialize_amd64nbsd_tdep): ... this.
	* arm-linux-tdep.c (arm_linux_software_single_step): Make it static.
	(_initialize_arm_linux_tdep): Declare.
	* armbsd-tdep.c (armbsd_fpreg_offset): Make it static.
	* armnbsd-tdep.c (_initialize_arm_netbsd_tdep): Declare.
	* armobsd-tdep.c (_initialize_armobsd_tdep): Declare.
	* avr-tdep.c (avr_return_value): Make it static.
	(avr_frame_unwind_cache): Ditto.
	* bsd-uthread.c (bsd_uthread_inferior_created): Ditto.
	(bsd_uthread_solib_loaded): Ditto.
	(bsd_uthread_solib_unloaded): Ditto.
	(bsd_uthread_target): Ditto.
	(_initialize_bsd_uthread): Declare.
	* cris-tdep.c (crisv32_single_step_through_delay): Make it static.
	(cris_frame_unwind_cache): Ditto.
	* frv-tdep.c (frv_return_value): Ditto.
	* h8300-tdep.c (h8300_use_struct_convention): Ditto.
	(h8300h_use_struct_convention): Ditto.
	* hppa-tdep.c (hppa_sign_extend, hppa_low_hppa_sign_extend):
	Ditto.
	* hppa-tdep.h (hppa_low_sign_extend, hppa_sign_extend): Delete
	declarations.
	* hppabsd-tdep.c: Include hppabsd-tdep.h.
	(hppabsd_find_global_pointer): Make it static.
	* hppabsd-tdep.h: New.
	* hppanbsd-tdep.c: Include hppabsd-tdep.h.
	(hppabsd_init_abi): Remove declaration.
	(_initialize_hppabsd_tdep): Remove declaration.
	(_initialize_hppanbsd_tdep): Declare.
	* hppaobsd-tdep.c: Include hppabsd-tdep.h.
	(hppabsd_init_abi): Delete declaration.
	(hppaobsd_init_abi): Make it static.
	* i386-nto-tdep.c (_initialize_i386nto_tdep): Declare.
	* i386nbsd-tdep.c (_initialize_i386nbsd_tdep): Declare.
	* ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Declare.
	* ia64-tdep.c (ia64_register_reggroup_p): Make it static.
	* iq2000-tdep.c (_initialize_iq2000_tdep): Declare.
	* m32c-tdep.c (m32c_register_reggroup_p): Make it static.
	(m32c_analyze_prologue, m32c_virtual_frame_pointer): Ditto.
	(_initialize_m32c_tdep): Declare.
	* m32r-rom.c (_initialize_m32r_rom): Declare.
	* m32r-tdep.c (m32r_skip_prologue): Make it static.
	(m32r_return_value): Ditto.
	* m68hc11-tdep.c (m68hc11_frame_unwind_cache): Make it static.
	(m68hc11_return_value): Ditto.
	* m68klinux-tdep.c (_initialize_m68k_linux_tdep): Declare.
	* m88k-tdep.c (m88k_frame_cache): Make it static.
	* mep-tdep.c (mep_gdb_print_insn): Ditto.
	(mep_return_value): Ditto.
	(_initialize_mep_tdep): Declare.
	* mips-irix-tdep.c (_initialize_mips_irix_tdep): Declare.
	* mips-linux-tdep.c (supply_64bit_reg): Make it static.
	(mips_linux_syscall_next_pc): Ditto.
	(_initialize_mips_linux_tdep): Declare.
	* mips-tdep.c (mips_single_step_through_delay): Make it static.
	* mipsnbsd-tdep.c (_initialize_mipsnbsd_tdep): Declare.
	* mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Declare.
	* mn10300-tdep.c (_initialize_mn10300_tdep): Declare.
	* mt-tdep.c (_initialize_mt_tdep): Declare.
	* nbsd-tdep.c: Include nbsd-tdep.h.
	* nto-tdep.c (find_load_phdr): Make it static.
	(_initialize_nto_tdep): Declare.
	* ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Make it
	static.
	(_initialize_ppc_linux_tdep): Declare.
	* remote-m32r-sdi.c (m32r_can_use_hw_watchpoint)
	(m32r_insert_watchpoint, m32r_remove_watchpoint)
	(m32r_stopped_data_address, m32r_stopped_by_watchpoint): Make
	static.
	* rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Declare.
	* rs6000-nat.c: Include xcoffread.h.
	(find_toc_address): Don't extern declare get_toc_offset.  Adjust
	to call xcoff_get_to_offset.
	* rs6000-tdep.c (ppc_vsx_support_p, ppc_displaced_step_fixup)
	(rs6000_skip_main_prologue, rs6000_in_solib_return_trampoline)
	(rs6000_skip_trampoline_code): Make static.
	* s390-tdep.c (s390_regset_from_core_section): Ditto.
	* sh-tdep.c (sh_register_reggroup_p): Ditto.
	* shnbsd-tdep.c (shnbsd_regset_from_core_section): Ditto.
	(_initialize_shnbsd_tdep): Declare.
	* solib-frv.c (displacement_from_map): Make static.
	(_initialize_frv_solib): Declare.
	* solib-irix.c (fetch_lm_info): Make static.
	(_initialize_irix_solib): Declare.
	* solib-som.c: Include solib-som.h.
	(som_solib_select): Line break.
	* sparc-tdep.c (sparc_regset_from_core_section): Make static.
	* sparcnbsd-tdep.c (_initialize_sparnbsd_tdep): Rename to ...
	(_initialize_sparcnbsd_tdep): ... this.
	* spu-tdep.c (spu_software_single_step): Make it static.
	(_initialize_spu_tdep): Declare.
	* vax-tdep.c (vax_frame_cache): Make it static.
	* xcoffread.c: Include xcoffread.h.
	(get_toc_offset): Rename to ...
	(xcoff_get_toc_offset): ... this.
	(_initialize_xcoffread): Declare.
	* xcoffread.h: New.
	* xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Declare.
	* xtensa-tdep.c (xtensa_skip_prologue, xtensa_derive_tdep): Make
	static.
	(_initialize_xtensa_tdep): Declare.
2009-02-22 01:02:20 +00:00

4062 lines
126 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* Target-dependent code for GDB, the GNU debugger.
Copyright (C) 1986, 1987, 1989, 1991, 1992, 1993, 1994, 1995, 1996, 1997,
1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
#include "frame.h"
#include "inferior.h"
#include "symtab.h"
#include "target.h"
#include "gdbcore.h"
#include "gdbcmd.h"
#include "objfiles.h"
#include "arch-utils.h"
#include "regcache.h"
#include "regset.h"
#include "doublest.h"
#include "value.h"
#include "parser-defs.h"
#include "osabi.h"
#include "infcall.h"
#include "sim-regno.h"
#include "gdb/sim-ppc.h"
#include "reggroups.h"
#include "dwarf2-frame.h"
#include "target-descriptions.h"
#include "user-regs.h"
#include "libbfd.h" /* for bfd_default_set_arch_mach */
#include "coff/internal.h" /* for libcoff.h */
#include "libcoff.h" /* for xcoff_data */
#include "coff/xcoff.h"
#include "libxcoff.h"
#include "elf-bfd.h"
#include "elf/ppc.h"
#include "solib-svr4.h"
#include "ppc-tdep.h"
#include "gdb_assert.h"
#include "dis-asm.h"
#include "trad-frame.h"
#include "frame-unwind.h"
#include "frame-base.h"
#include "features/rs6000/powerpc-32.c"
#include "features/rs6000/powerpc-altivec32.c"
#include "features/rs6000/powerpc-vsx32.c"
#include "features/rs6000/powerpc-403.c"
#include "features/rs6000/powerpc-403gc.c"
#include "features/rs6000/powerpc-505.c"
#include "features/rs6000/powerpc-601.c"
#include "features/rs6000/powerpc-602.c"
#include "features/rs6000/powerpc-603.c"
#include "features/rs6000/powerpc-604.c"
#include "features/rs6000/powerpc-64.c"
#include "features/rs6000/powerpc-altivec64.c"
#include "features/rs6000/powerpc-vsx64.c"
#include "features/rs6000/powerpc-7400.c"
#include "features/rs6000/powerpc-750.c"
#include "features/rs6000/powerpc-860.c"
#include "features/rs6000/powerpc-e500.c"
#include "features/rs6000/rs6000.c"
/* Determine if regnum is an SPE pseudo-register. */
#define IS_SPE_PSEUDOREG(tdep, regnum) ((tdep)->ppc_ev0_regnum >= 0 \
&& (regnum) >= (tdep)->ppc_ev0_regnum \
&& (regnum) < (tdep)->ppc_ev0_regnum + 32)
/* Determine if regnum is a decimal float pseudo-register. */
#define IS_DFP_PSEUDOREG(tdep, regnum) ((tdep)->ppc_dl0_regnum >= 0 \
&& (regnum) >= (tdep)->ppc_dl0_regnum \
&& (regnum) < (tdep)->ppc_dl0_regnum + 16)
/* Determine if regnum is a POWER7 VSX register. */
#define IS_VSX_PSEUDOREG(tdep, regnum) ((tdep)->ppc_vsr0_regnum >= 0 \
&& (regnum) >= (tdep)->ppc_vsr0_regnum \
&& (regnum) < (tdep)->ppc_vsr0_regnum + ppc_num_vsrs)
/* Determine if regnum is a POWER7 Extended FP register. */
#define IS_EFP_PSEUDOREG(tdep, regnum) ((tdep)->ppc_efpr0_regnum >= 0 \
&& (regnum) >= (tdep)->ppc_efpr0_regnum \
&& (regnum) < (tdep)->ppc_efpr0_regnum + ppc_num_fprs)
/* The list of available "set powerpc ..." and "show powerpc ..."
commands. */
static struct cmd_list_element *setpowerpccmdlist = NULL;
static struct cmd_list_element *showpowerpccmdlist = NULL;
static enum auto_boolean powerpc_soft_float_global = AUTO_BOOLEAN_AUTO;
/* The vector ABI to use. Keep this in sync with powerpc_vector_abi. */
static const char *powerpc_vector_strings[] =
{
"auto",
"generic",
"altivec",
"spe",
NULL
};
/* A variable that can be configured by the user. */
static enum powerpc_vector_abi powerpc_vector_abi_global = POWERPC_VEC_AUTO;
static const char *powerpc_vector_abi_string = "auto";
/* To be used by skip_prologue. */
struct rs6000_framedata
{
int offset; /* total size of frame --- the distance
by which we decrement sp to allocate
the frame */
int saved_gpr; /* smallest # of saved gpr */
unsigned int gpr_mask; /* Each bit is an individual saved GPR. */
int saved_fpr; /* smallest # of saved fpr */
int saved_vr; /* smallest # of saved vr */
int saved_ev; /* smallest # of saved ev */
int alloca_reg; /* alloca register number (frame ptr) */
char frameless; /* true if frameless functions. */
char nosavedpc; /* true if pc not saved. */
char used_bl; /* true if link register clobbered */
int gpr_offset; /* offset of saved gprs from prev sp */
int fpr_offset; /* offset of saved fprs from prev sp */
int vr_offset; /* offset of saved vrs from prev sp */
int ev_offset; /* offset of saved evs from prev sp */
int lr_offset; /* offset of saved lr */
int lr_register; /* register of saved lr, if trustworthy */
int cr_offset; /* offset of saved cr */
int vrsave_offset; /* offset of saved vrsave register */
};
/* Is REGNO a VSX register? Return 1 if so, 0 otherwise. */
int
vsx_register_p (struct gdbarch *gdbarch, int regno)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
if (tdep->ppc_vsr0_regnum < 0)
return 0;
else
return (regno >= tdep->ppc_vsr0_upper_regnum && regno
<= tdep->ppc_vsr0_upper_regnum + 31);
}
/* Is REGNO an AltiVec register? Return 1 if so, 0 otherwise. */
int
altivec_register_p (struct gdbarch *gdbarch, int regno)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
if (tdep->ppc_vr0_regnum < 0 || tdep->ppc_vrsave_regnum < 0)
return 0;
else
return (regno >= tdep->ppc_vr0_regnum && regno <= tdep->ppc_vrsave_regnum);
}
/* Return true if REGNO is an SPE register, false otherwise. */
int
spe_register_p (struct gdbarch *gdbarch, int regno)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
/* Is it a reference to EV0 -- EV31, and do we have those? */
if (IS_SPE_PSEUDOREG (tdep, regno))
return 1;
/* Is it a reference to one of the raw upper GPR halves? */
if (tdep->ppc_ev0_upper_regnum >= 0
&& tdep->ppc_ev0_upper_regnum <= regno
&& regno < tdep->ppc_ev0_upper_regnum + ppc_num_gprs)
return 1;
/* Is it a reference to the 64-bit accumulator, and do we have that? */
if (tdep->ppc_acc_regnum >= 0
&& tdep->ppc_acc_regnum == regno)
return 1;
/* Is it a reference to the SPE floating-point status and control register,
and do we have that? */
if (tdep->ppc_spefscr_regnum >= 0
&& tdep->ppc_spefscr_regnum == regno)
return 1;
return 0;
}
/* Return non-zero if the architecture described by GDBARCH has
floating-point registers (f0 --- f31 and fpscr). */
int
ppc_floating_point_unit_p (struct gdbarch *gdbarch)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
return (tdep->ppc_fp0_regnum >= 0
&& tdep->ppc_fpscr_regnum >= 0);
}
/* Return non-zero if the architecture described by GDBARCH has
VSX registers (vsr0 --- vsr63). */
static int
ppc_vsx_support_p (struct gdbarch *gdbarch)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
return tdep->ppc_vsr0_regnum >= 0;
}
/* Return non-zero if the architecture described by GDBARCH has
Altivec registers (vr0 --- vr31, vrsave and vscr). */
int
ppc_altivec_support_p (struct gdbarch *gdbarch)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
return (tdep->ppc_vr0_regnum >= 0
&& tdep->ppc_vrsave_regnum >= 0);
}
/* Check that TABLE[GDB_REGNO] is not already initialized, and then
set it to SIM_REGNO.
This is a helper function for init_sim_regno_table, constructing
the table mapping GDB register numbers to sim register numbers; we
initialize every element in that table to -1 before we start
filling it in. */
static void
set_sim_regno (int *table, int gdb_regno, int sim_regno)
{
/* Make sure we don't try to assign any given GDB register a sim
register number more than once. */
gdb_assert (table[gdb_regno] == -1);
table[gdb_regno] = sim_regno;
}
/* Initialize ARCH->tdep->sim_regno, the table mapping GDB register
numbers to simulator register numbers, based on the values placed
in the ARCH->tdep->ppc_foo_regnum members. */
static void
init_sim_regno_table (struct gdbarch *arch)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (arch);
int total_regs = gdbarch_num_regs (arch);
int *sim_regno = GDBARCH_OBSTACK_CALLOC (arch, total_regs, int);
int i;
static const char *const segment_regs[] = {
"sr0", "sr1", "sr2", "sr3", "sr4", "sr5", "sr6", "sr7",
"sr8", "sr9", "sr10", "sr11", "sr12", "sr13", "sr14", "sr15"
};
/* Presume that all registers not explicitly mentioned below are
unavailable from the sim. */
for (i = 0; i < total_regs; i++)
sim_regno[i] = -1;
/* General-purpose registers. */
for (i = 0; i < ppc_num_gprs; i++)
set_sim_regno (sim_regno, tdep->ppc_gp0_regnum + i, sim_ppc_r0_regnum + i);
/* Floating-point registers. */
if (tdep->ppc_fp0_regnum >= 0)
for (i = 0; i < ppc_num_fprs; i++)
set_sim_regno (sim_regno,
tdep->ppc_fp0_regnum + i,
sim_ppc_f0_regnum + i);
if (tdep->ppc_fpscr_regnum >= 0)
set_sim_regno (sim_regno, tdep->ppc_fpscr_regnum, sim_ppc_fpscr_regnum);
set_sim_regno (sim_regno, gdbarch_pc_regnum (arch), sim_ppc_pc_regnum);
set_sim_regno (sim_regno, tdep->ppc_ps_regnum, sim_ppc_ps_regnum);
set_sim_regno (sim_regno, tdep->ppc_cr_regnum, sim_ppc_cr_regnum);
/* Segment registers. */
for (i = 0; i < ppc_num_srs; i++)
{
int gdb_regno;
gdb_regno = user_reg_map_name_to_regnum (arch, segment_regs[i], -1);
if (gdb_regno >= 0)
set_sim_regno (sim_regno, gdb_regno, sim_ppc_sr0_regnum + i);
}
/* Altivec registers. */
if (tdep->ppc_vr0_regnum >= 0)
{
for (i = 0; i < ppc_num_vrs; i++)
set_sim_regno (sim_regno,
tdep->ppc_vr0_regnum + i,
sim_ppc_vr0_regnum + i);
/* FIXME: jimb/2004-07-15: when we have tdep->ppc_vscr_regnum,
we can treat this more like the other cases. */
set_sim_regno (sim_regno,
tdep->ppc_vr0_regnum + ppc_num_vrs,
sim_ppc_vscr_regnum);
}
/* vsave is a special-purpose register, so the code below handles it. */
/* SPE APU (E500) registers. */
if (tdep->ppc_ev0_upper_regnum >= 0)
for (i = 0; i < ppc_num_gprs; i++)
set_sim_regno (sim_regno,
tdep->ppc_ev0_upper_regnum + i,
sim_ppc_rh0_regnum + i);
if (tdep->ppc_acc_regnum >= 0)
set_sim_regno (sim_regno, tdep->ppc_acc_regnum, sim_ppc_acc_regnum);
/* spefscr is a special-purpose register, so the code below handles it. */
#ifdef WITH_SIM
/* Now handle all special-purpose registers. Verify that they
haven't mistakenly been assigned numbers by any of the above
code. */
for (i = 0; i < sim_ppc_num_sprs; i++)
{
const char *spr_name = sim_spr_register_name (i);
int gdb_regno = -1;
if (spr_name != NULL)
gdb_regno = user_reg_map_name_to_regnum (arch, spr_name, -1);
if (gdb_regno != -1)
set_sim_regno (sim_regno, gdb_regno, sim_ppc_spr0_regnum + i);
}
#endif
/* Drop the initialized array into place. */
tdep->sim_regno = sim_regno;
}
/* Given a GDB register number REG, return the corresponding SIM
register number. */
static int
rs6000_register_sim_regno (struct gdbarch *gdbarch, int reg)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
int sim_regno;
if (tdep->sim_regno == NULL)
init_sim_regno_table (gdbarch);
gdb_assert (0 <= reg
&& reg <= gdbarch_num_regs (gdbarch)
+ gdbarch_num_pseudo_regs (gdbarch));
sim_regno = tdep->sim_regno[reg];
if (sim_regno >= 0)
return sim_regno;
else
return LEGACY_SIM_REGNO_IGNORE;
}
/* Register set support functions. */
/* REGS + OFFSET contains register REGNUM in a field REGSIZE wide.
Write the register to REGCACHE. */
void
ppc_supply_reg (struct regcache *regcache, int regnum,
const gdb_byte *regs, size_t offset, int regsize)
{
if (regnum != -1 && offset != -1)
{
if (regsize > 4)
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
int gdb_regsize = register_size (gdbarch, regnum);
if (gdb_regsize < regsize
&& gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG)
offset += regsize - gdb_regsize;
}
regcache_raw_supply (regcache, regnum, regs + offset);
}
}
/* Read register REGNUM from REGCACHE and store to REGS + OFFSET
in a field REGSIZE wide. Zero pad as necessary. */
void
ppc_collect_reg (const struct regcache *regcache, int regnum,
gdb_byte *regs, size_t offset, int regsize)
{
if (regnum != -1 && offset != -1)
{
if (regsize > 4)
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
int gdb_regsize = register_size (gdbarch, regnum);
if (gdb_regsize < regsize)
{
if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG)
{
memset (regs + offset, 0, regsize - gdb_regsize);
offset += regsize - gdb_regsize;
}
else
memset (regs + offset + regsize - gdb_regsize, 0,
regsize - gdb_regsize);
}
}
regcache_raw_collect (regcache, regnum, regs + offset);
}
}
static int
ppc_greg_offset (struct gdbarch *gdbarch,
struct gdbarch_tdep *tdep,
const struct ppc_reg_offsets *offsets,
int regnum,
int *regsize)
{
*regsize = offsets->gpr_size;
if (regnum >= tdep->ppc_gp0_regnum
&& regnum < tdep->ppc_gp0_regnum + ppc_num_gprs)
return (offsets->r0_offset
+ (regnum - tdep->ppc_gp0_regnum) * offsets->gpr_size);
if (regnum == gdbarch_pc_regnum (gdbarch))
return offsets->pc_offset;
if (regnum == tdep->ppc_ps_regnum)
return offsets->ps_offset;
if (regnum == tdep->ppc_lr_regnum)
return offsets->lr_offset;
if (regnum == tdep->ppc_ctr_regnum)
return offsets->ctr_offset;
*regsize = offsets->xr_size;
if (regnum == tdep->ppc_cr_regnum)
return offsets->cr_offset;
if (regnum == tdep->ppc_xer_regnum)
return offsets->xer_offset;
if (regnum == tdep->ppc_mq_regnum)
return offsets->mq_offset;
return -1;
}
static int
ppc_fpreg_offset (struct gdbarch_tdep *tdep,
const struct ppc_reg_offsets *offsets,
int regnum)
{
if (regnum >= tdep->ppc_fp0_regnum
&& regnum < tdep->ppc_fp0_regnum + ppc_num_fprs)
return offsets->f0_offset + (regnum - tdep->ppc_fp0_regnum) * 8;
if (regnum == tdep->ppc_fpscr_regnum)
return offsets->fpscr_offset;
return -1;
}
static int
ppc_vrreg_offset (struct gdbarch_tdep *tdep,
const struct ppc_reg_offsets *offsets,
int regnum)
{
if (regnum >= tdep->ppc_vr0_regnum
&& regnum < tdep->ppc_vr0_regnum + ppc_num_vrs)
return offsets->vr0_offset + (regnum - tdep->ppc_vr0_regnum) * 16;
if (regnum == tdep->ppc_vrsave_regnum - 1)
return offsets->vscr_offset;
if (regnum == tdep->ppc_vrsave_regnum)
return offsets->vrsave_offset;
return -1;
}
/* Supply register REGNUM in the general-purpose register set REGSET
from the buffer specified by GREGS and LEN to register cache
REGCACHE. If REGNUM is -1, do this for all registers in REGSET. */
void
ppc_supply_gregset (const struct regset *regset, struct regcache *regcache,
int regnum, const void *gregs, size_t len)
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
const struct ppc_reg_offsets *offsets = regset->descr;
size_t offset;
int regsize;
if (regnum == -1)
{
int i;
int gpr_size = offsets->gpr_size;
for (i = tdep->ppc_gp0_regnum, offset = offsets->r0_offset;
i < tdep->ppc_gp0_regnum + ppc_num_gprs;
i++, offset += gpr_size)
ppc_supply_reg (regcache, i, gregs, offset, gpr_size);
ppc_supply_reg (regcache, gdbarch_pc_regnum (gdbarch),
gregs, offsets->pc_offset, gpr_size);
ppc_supply_reg (regcache, tdep->ppc_ps_regnum,
gregs, offsets->ps_offset, gpr_size);
ppc_supply_reg (regcache, tdep->ppc_lr_regnum,
gregs, offsets->lr_offset, gpr_size);
ppc_supply_reg (regcache, tdep->ppc_ctr_regnum,
gregs, offsets->ctr_offset, gpr_size);
ppc_supply_reg (regcache, tdep->ppc_cr_regnum,
gregs, offsets->cr_offset, offsets->xr_size);
ppc_supply_reg (regcache, tdep->ppc_xer_regnum,
gregs, offsets->xer_offset, offsets->xr_size);
ppc_supply_reg (regcache, tdep->ppc_mq_regnum,
gregs, offsets->mq_offset, offsets->xr_size);
return;
}
offset = ppc_greg_offset (gdbarch, tdep, offsets, regnum, &regsize);
ppc_supply_reg (regcache, regnum, gregs, offset, regsize);
}
/* Supply register REGNUM in the floating-point register set REGSET
from the buffer specified by FPREGS and LEN to register cache
REGCACHE. If REGNUM is -1, do this for all registers in REGSET. */
void
ppc_supply_fpregset (const struct regset *regset, struct regcache *regcache,
int regnum, const void *fpregs, size_t len)
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
struct gdbarch_tdep *tdep;
const struct ppc_reg_offsets *offsets;
size_t offset;
if (!ppc_floating_point_unit_p (gdbarch))
return;
tdep = gdbarch_tdep (gdbarch);
offsets = regset->descr;
if (regnum == -1)
{
int i;
for (i = tdep->ppc_fp0_regnum, offset = offsets->f0_offset;
i < tdep->ppc_fp0_regnum + ppc_num_fprs;
i++, offset += 8)
ppc_supply_reg (regcache, i, fpregs, offset, 8);
ppc_supply_reg (regcache, tdep->ppc_fpscr_regnum,
fpregs, offsets->fpscr_offset, offsets->fpscr_size);
return;
}
offset = ppc_fpreg_offset (tdep, offsets, regnum);
ppc_supply_reg (regcache, regnum, fpregs, offset,
regnum == tdep->ppc_fpscr_regnum ? offsets->fpscr_size : 8);
}
/* Supply register REGNUM in the VSX register set REGSET
from the buffer specified by VSXREGS and LEN to register cache
REGCACHE. If REGNUM is -1, do this for all registers in REGSET. */
void
ppc_supply_vsxregset (const struct regset *regset, struct regcache *regcache,
int regnum, const void *vsxregs, size_t len)
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
struct gdbarch_tdep *tdep;
if (!ppc_vsx_support_p (gdbarch))
return;
tdep = gdbarch_tdep (gdbarch);
if (regnum == -1)
{
int i;
for (i = tdep->ppc_vsr0_upper_regnum;
i < tdep->ppc_vsr0_upper_regnum + 32;
i++)
ppc_supply_reg (regcache, i, vsxregs, 0, 8);
return;
}
else
ppc_supply_reg (regcache, regnum, vsxregs, 0, 8);
}
/* Supply register REGNUM in the Altivec register set REGSET
from the buffer specified by VRREGS and LEN to register cache
REGCACHE. If REGNUM is -1, do this for all registers in REGSET. */
void
ppc_supply_vrregset (const struct regset *regset, struct regcache *regcache,
int regnum, const void *vrregs, size_t len)
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
struct gdbarch_tdep *tdep;
const struct ppc_reg_offsets *offsets;
size_t offset;
if (!ppc_altivec_support_p (gdbarch))
return;
tdep = gdbarch_tdep (gdbarch);
offsets = regset->descr;
if (regnum == -1)
{
int i;
for (i = tdep->ppc_vr0_regnum, offset = offsets->vr0_offset;
i < tdep->ppc_vr0_regnum + ppc_num_vrs;
i++, offset += 16)
ppc_supply_reg (regcache, i, vrregs, offset, 16);
ppc_supply_reg (regcache, (tdep->ppc_vrsave_regnum - 1),
vrregs, offsets->vscr_offset, 4);
ppc_supply_reg (regcache, tdep->ppc_vrsave_regnum,
vrregs, offsets->vrsave_offset, 4);
return;
}
offset = ppc_vrreg_offset (tdep, offsets, regnum);
if (regnum != tdep->ppc_vrsave_regnum
&& regnum != tdep->ppc_vrsave_regnum - 1)
ppc_supply_reg (regcache, regnum, vrregs, offset, 16);
else
ppc_supply_reg (regcache, regnum,
vrregs, offset, 4);
}
/* Collect register REGNUM in the general-purpose register set
REGSET from register cache REGCACHE into the buffer specified by
GREGS and LEN. If REGNUM is -1, do this for all registers in
REGSET. */
void
ppc_collect_gregset (const struct regset *regset,
const struct regcache *regcache,
int regnum, void *gregs, size_t len)
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
const struct ppc_reg_offsets *offsets = regset->descr;
size_t offset;
int regsize;
if (regnum == -1)
{
int i;
int gpr_size = offsets->gpr_size;
for (i = tdep->ppc_gp0_regnum, offset = offsets->r0_offset;
i < tdep->ppc_gp0_regnum + ppc_num_gprs;
i++, offset += gpr_size)
ppc_collect_reg (regcache, i, gregs, offset, gpr_size);
ppc_collect_reg (regcache, gdbarch_pc_regnum (gdbarch),
gregs, offsets->pc_offset, gpr_size);
ppc_collect_reg (regcache, tdep->ppc_ps_regnum,
gregs, offsets->ps_offset, gpr_size);
ppc_collect_reg (regcache, tdep->ppc_lr_regnum,
gregs, offsets->lr_offset, gpr_size);
ppc_collect_reg (regcache, tdep->ppc_ctr_regnum,
gregs, offsets->ctr_offset, gpr_size);
ppc_collect_reg (regcache, tdep->ppc_cr_regnum,
gregs, offsets->cr_offset, offsets->xr_size);
ppc_collect_reg (regcache, tdep->ppc_xer_regnum,
gregs, offsets->xer_offset, offsets->xr_size);
ppc_collect_reg (regcache, tdep->ppc_mq_regnum,
gregs, offsets->mq_offset, offsets->xr_size);
return;
}
offset = ppc_greg_offset (gdbarch, tdep, offsets, regnum, &regsize);
ppc_collect_reg (regcache, regnum, gregs, offset, regsize);
}
/* Collect register REGNUM in the floating-point register set
REGSET from register cache REGCACHE into the buffer specified by
FPREGS and LEN. If REGNUM is -1, do this for all registers in
REGSET. */
void
ppc_collect_fpregset (const struct regset *regset,
const struct regcache *regcache,
int regnum, void *fpregs, size_t len)
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
struct gdbarch_tdep *tdep;
const struct ppc_reg_offsets *offsets;
size_t offset;
if (!ppc_floating_point_unit_p (gdbarch))
return;
tdep = gdbarch_tdep (gdbarch);
offsets = regset->descr;
if (regnum == -1)
{
int i;
for (i = tdep->ppc_fp0_regnum, offset = offsets->f0_offset;
i < tdep->ppc_fp0_regnum + ppc_num_fprs;
i++, offset += 8)
ppc_collect_reg (regcache, i, fpregs, offset, 8);
ppc_collect_reg (regcache, tdep->ppc_fpscr_regnum,
fpregs, offsets->fpscr_offset, offsets->fpscr_size);
return;
}
offset = ppc_fpreg_offset (tdep, offsets, regnum);
ppc_collect_reg (regcache, regnum, fpregs, offset,
regnum == tdep->ppc_fpscr_regnum ? offsets->fpscr_size : 8);
}
/* Collect register REGNUM in the VSX register set
REGSET from register cache REGCACHE into the buffer specified by
VSXREGS and LEN. If REGNUM is -1, do this for all registers in
REGSET. */
void
ppc_collect_vsxregset (const struct regset *regset,
const struct regcache *regcache,
int regnum, void *vsxregs, size_t len)
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
struct gdbarch_tdep *tdep;
if (!ppc_vsx_support_p (gdbarch))
return;
tdep = gdbarch_tdep (gdbarch);
if (regnum == -1)
{
int i;
for (i = tdep->ppc_vsr0_upper_regnum;
i < tdep->ppc_vsr0_upper_regnum + 32;
i++)
ppc_collect_reg (regcache, i, vsxregs, 0, 8);
return;
}
else
ppc_collect_reg (regcache, regnum, vsxregs, 0, 8);
}
/* Collect register REGNUM in the Altivec register set
REGSET from register cache REGCACHE into the buffer specified by
VRREGS and LEN. If REGNUM is -1, do this for all registers in
REGSET. */
void
ppc_collect_vrregset (const struct regset *regset,
const struct regcache *regcache,
int regnum, void *vrregs, size_t len)
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
struct gdbarch_tdep *tdep;
const struct ppc_reg_offsets *offsets;
size_t offset;
if (!ppc_altivec_support_p (gdbarch))
return;
tdep = gdbarch_tdep (gdbarch);
offsets = regset->descr;
if (regnum == -1)
{
int i;
for (i = tdep->ppc_vr0_regnum, offset = offsets->vr0_offset;
i < tdep->ppc_vr0_regnum + ppc_num_vrs;
i++, offset += 16)
ppc_collect_reg (regcache, i, vrregs, offset, 16);
ppc_collect_reg (regcache, (tdep->ppc_vrsave_regnum - 1),
vrregs, offsets->vscr_offset, 4);
ppc_collect_reg (regcache, tdep->ppc_vrsave_regnum,
vrregs, offsets->vrsave_offset, 4);
return;
}
offset = ppc_vrreg_offset (tdep, offsets, regnum);
if (regnum != tdep->ppc_vrsave_regnum
&& regnum != tdep->ppc_vrsave_regnum - 1)
ppc_collect_reg (regcache, regnum, vrregs, offset, 16);
else
ppc_collect_reg (regcache, regnum,
vrregs, offset, 4);
}
static int
insn_changes_sp_or_jumps (unsigned long insn)
{
int opcode = (insn >> 26) & 0x03f;
int sd = (insn >> 21) & 0x01f;
int a = (insn >> 16) & 0x01f;
int subcode = (insn >> 1) & 0x3ff;
/* Changes the stack pointer. */
/* NOTE: There are many ways to change the value of a given register.
The ways below are those used when the register is R1, the SP,
in a funtion's epilogue. */
if (opcode == 31 && subcode == 444 && a == 1)
return 1; /* mr R1,Rn */
if (opcode == 14 && sd == 1)
return 1; /* addi R1,Rn,simm */
if (opcode == 58 && sd == 1)
return 1; /* ld R1,ds(Rn) */
/* Transfers control. */
if (opcode == 18)
return 1; /* b */
if (opcode == 16)
return 1; /* bc */
if (opcode == 19 && subcode == 16)
return 1; /* bclr */
if (opcode == 19 && subcode == 528)
return 1; /* bcctr */
return 0;
}
/* Return true if we are in the function's epilogue, i.e. after the
instruction that destroyed the function's stack frame.
1) scan forward from the point of execution:
a) If you find an instruction that modifies the stack pointer
or transfers control (except a return), execution is not in
an epilogue, return.
b) Stop scanning if you find a return instruction or reach the
end of the function or reach the hard limit for the size of
an epilogue.
2) scan backward from the point of execution:
a) If you find an instruction that modifies the stack pointer,
execution *is* in an epilogue, return.
b) Stop scanning if you reach an instruction that transfers
control or the beginning of the function or reach the hard
limit for the size of an epilogue. */
static int
rs6000_in_function_epilogue_p (struct gdbarch *gdbarch, CORE_ADDR pc)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
bfd_byte insn_buf[PPC_INSN_SIZE];
CORE_ADDR scan_pc, func_start, func_end, epilogue_start, epilogue_end;
unsigned long insn;
struct frame_info *curfrm;
/* Find the search limits based on function boundaries and hard limit. */
if (!find_pc_partial_function (pc, NULL, &func_start, &func_end))
return 0;
epilogue_start = pc - PPC_MAX_EPILOGUE_INSTRUCTIONS * PPC_INSN_SIZE;
if (epilogue_start < func_start) epilogue_start = func_start;
epilogue_end = pc + PPC_MAX_EPILOGUE_INSTRUCTIONS * PPC_INSN_SIZE;
if (epilogue_end > func_end) epilogue_end = func_end;
curfrm = get_current_frame ();
/* Scan forward until next 'blr'. */
for (scan_pc = pc; scan_pc < epilogue_end; scan_pc += PPC_INSN_SIZE)
{
if (!safe_frame_unwind_memory (curfrm, scan_pc, insn_buf, PPC_INSN_SIZE))
return 0;
insn = extract_unsigned_integer (insn_buf, PPC_INSN_SIZE);
if (insn == 0x4e800020)
break;
/* Assume a bctr is a tail call unless it points strictly within
this function. */
if (insn == 0x4e800420)
{
CORE_ADDR ctr = get_frame_register_unsigned (curfrm,
tdep->ppc_ctr_regnum);
if (ctr > func_start && ctr < func_end)
return 0;
else
break;
}
if (insn_changes_sp_or_jumps (insn))
return 0;
}
/* Scan backward until adjustment to stack pointer (R1). */
for (scan_pc = pc - PPC_INSN_SIZE;
scan_pc >= epilogue_start;
scan_pc -= PPC_INSN_SIZE)
{
if (!safe_frame_unwind_memory (curfrm, scan_pc, insn_buf, PPC_INSN_SIZE))
return 0;
insn = extract_unsigned_integer (insn_buf, PPC_INSN_SIZE);
if (insn_changes_sp_or_jumps (insn))
return 1;
}
return 0;
}
/* Get the ith function argument for the current function. */
static CORE_ADDR
rs6000_fetch_pointer_argument (struct frame_info *frame, int argi,
struct type *type)
{
return get_frame_register_unsigned (frame, 3 + argi);
}
/* Sequence of bytes for breakpoint instruction. */
const static unsigned char *
rs6000_breakpoint_from_pc (struct gdbarch *gdbarch, CORE_ADDR *bp_addr,
int *bp_size)
{
static unsigned char big_breakpoint[] = { 0x7d, 0x82, 0x10, 0x08 };
static unsigned char little_breakpoint[] = { 0x08, 0x10, 0x82, 0x7d };
*bp_size = 4;
if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG)
return big_breakpoint;
else
return little_breakpoint;
}
/* Instruction masks for displaced stepping. */
#define BRANCH_MASK 0xfc000000
#define BP_MASK 0xFC0007FE
#define B_INSN 0x48000000
#define BC_INSN 0x40000000
#define BXL_INSN 0x4c000000
#define BP_INSN 0x7C000008
/* Fix up the state of registers and memory after having single-stepped
a displaced instruction. */
static void
ppc_displaced_step_fixup (struct gdbarch *gdbarch,
struct displaced_step_closure *closure,
CORE_ADDR from, CORE_ADDR to,
struct regcache *regs)
{
/* Since we use simple_displaced_step_copy_insn, our closure is a
copy of the instruction. */
ULONGEST insn = extract_unsigned_integer ((gdb_byte *) closure,
PPC_INSN_SIZE);
ULONGEST opcode = 0;
/* Offset for non PC-relative instructions. */
LONGEST offset = PPC_INSN_SIZE;
opcode = insn & BRANCH_MASK;
if (debug_displaced)
fprintf_unfiltered (gdb_stdlog,
"displaced: (ppc) fixup (0x%s, 0x%s)\n",
paddr_nz (from), paddr_nz (to));
/* Handle PC-relative branch instructions. */
if (opcode == B_INSN || opcode == BC_INSN || opcode == BXL_INSN)
{
ULONGEST current_pc;
/* Read the current PC value after the instruction has been executed
in a displaced location. Calculate the offset to be applied to the
original PC value before the displaced stepping. */
regcache_cooked_read_unsigned (regs, gdbarch_pc_regnum (gdbarch),
&current_pc);
offset = current_pc - to;
if (opcode != BXL_INSN)
{
/* Check for AA bit indicating whether this is an absolute
addressing or PC-relative (1: absolute, 0: relative). */
if (!(insn & 0x2))
{
/* PC-relative addressing is being used in the branch. */
if (debug_displaced)
fprintf_unfiltered
(gdb_stdlog,
"displaced: (ppc) branch instruction: 0x%s\n"
"displaced: (ppc) adjusted PC from 0x%s to 0x%s\n",
paddr_nz (insn), paddr_nz (current_pc),
paddr_nz (from + offset));
regcache_cooked_write_unsigned (regs, gdbarch_pc_regnum (gdbarch),
from + offset);
}
}
else
{
/* If we're here, it means we have a branch to LR or CTR. If the
branch was taken, the offset is probably greater than 4 (the next
instruction), so it's safe to assume that an offset of 4 means we
did not take the branch. */
if (offset == PPC_INSN_SIZE)
regcache_cooked_write_unsigned (regs, gdbarch_pc_regnum (gdbarch),
from + PPC_INSN_SIZE);
}
/* Check for LK bit indicating whether we should set the link
register to point to the next instruction
(1: Set, 0: Don't set). */
if (insn & 0x1)
{
/* Link register needs to be set to the next instruction's PC. */
regcache_cooked_write_unsigned (regs,
gdbarch_tdep (gdbarch)->ppc_lr_regnum,
from + PPC_INSN_SIZE);
if (debug_displaced)
fprintf_unfiltered (gdb_stdlog,
"displaced: (ppc) adjusted LR to 0x%s\n",
paddr_nz (from + PPC_INSN_SIZE));
}
}
/* Check for breakpoints in the inferior. If we've found one, place the PC
right at the breakpoint instruction. */
else if ((insn & BP_MASK) == BP_INSN)
regcache_cooked_write_unsigned (regs, gdbarch_pc_regnum (gdbarch), from);
else
/* Handle any other instructions that do not fit in the categories above. */
regcache_cooked_write_unsigned (regs, gdbarch_pc_regnum (gdbarch),
from + offset);
}
/* Instruction masks used during single-stepping of atomic sequences. */
#define LWARX_MASK 0xfc0007fe
#define LWARX_INSTRUCTION 0x7c000028
#define LDARX_INSTRUCTION 0x7c0000A8
#define STWCX_MASK 0xfc0007ff
#define STWCX_INSTRUCTION 0x7c00012d
#define STDCX_INSTRUCTION 0x7c0001ad
/* Checks for an atomic sequence of instructions beginning with a LWARX/LDARX
instruction and ending with a STWCX/STDCX instruction. If such a sequence
is found, attempt to step through it. A breakpoint is placed at the end of
the sequence. */
int
ppc_deal_with_atomic_sequence (struct frame_info *frame)
{
CORE_ADDR pc = get_frame_pc (frame);
CORE_ADDR breaks[2] = {-1, -1};
CORE_ADDR loc = pc;
CORE_ADDR closing_insn; /* Instruction that closes the atomic sequence. */
int insn = read_memory_integer (loc, PPC_INSN_SIZE);
int insn_count;
int index;
int last_breakpoint = 0; /* Defaults to 0 (no breakpoints placed). */
const int atomic_sequence_length = 16; /* Instruction sequence length. */
int opcode; /* Branch instruction's OPcode. */
int bc_insn_count = 0; /* Conditional branch instruction count. */
/* Assume all atomic sequences start with a lwarx/ldarx instruction. */
if ((insn & LWARX_MASK) != LWARX_INSTRUCTION
&& (insn & LWARX_MASK) != LDARX_INSTRUCTION)
return 0;
/* Assume that no atomic sequence is longer than "atomic_sequence_length"
instructions. */
for (insn_count = 0; insn_count < atomic_sequence_length; ++insn_count)
{
loc += PPC_INSN_SIZE;
insn = read_memory_integer (loc, PPC_INSN_SIZE);
/* Assume that there is at most one conditional branch in the atomic
sequence. If a conditional branch is found, put a breakpoint in
its destination address. */
if ((insn & BRANCH_MASK) == BC_INSN)
{
int immediate = ((insn & ~3) << 16) >> 16;
int absolute = ((insn >> 1) & 1);
if (bc_insn_count >= 1)
return 0; /* More than one conditional branch found, fallback
to the standard single-step code. */
if (absolute)
breaks[1] = immediate;
else
breaks[1] = pc + immediate;
bc_insn_count++;
last_breakpoint++;
}
if ((insn & STWCX_MASK) == STWCX_INSTRUCTION
|| (insn & STWCX_MASK) == STDCX_INSTRUCTION)
break;
}
/* Assume that the atomic sequence ends with a stwcx/stdcx instruction. */
if ((insn & STWCX_MASK) != STWCX_INSTRUCTION
&& (insn & STWCX_MASK) != STDCX_INSTRUCTION)
return 0;
closing_insn = loc;
loc += PPC_INSN_SIZE;
insn = read_memory_integer (loc, PPC_INSN_SIZE);
/* Insert a breakpoint right after the end of the atomic sequence. */
breaks[0] = loc;
/* Check for duplicated breakpoints. Check also for a breakpoint
placed (branch instruction's destination) at the stwcx/stdcx
instruction, this resets the reservation and take us back to the
lwarx/ldarx instruction at the beginning of the atomic sequence. */
if (last_breakpoint && ((breaks[1] == breaks[0])
|| (breaks[1] == closing_insn)))
last_breakpoint = 0;
/* Effectively inserts the breakpoints. */
for (index = 0; index <= last_breakpoint; index++)
insert_single_step_breakpoint (breaks[index]);
return 1;
}
#define SIGNED_SHORT(x) \
((sizeof (short) == 2) \
? ((int)(short)(x)) \
: ((int)((((x) & 0xffff) ^ 0x8000) - 0x8000)))
#define GET_SRC_REG(x) (((x) >> 21) & 0x1f)
/* Limit the number of skipped non-prologue instructions, as the examining
of the prologue is expensive. */
static int max_skip_non_prologue_insns = 10;
/* Return nonzero if the given instruction OP can be part of the prologue
of a function and saves a parameter on the stack. FRAMEP should be
set if one of the previous instructions in the function has set the
Frame Pointer. */
static int
store_param_on_stack_p (unsigned long op, int framep, int *r0_contains_arg)
{
/* Move parameters from argument registers to temporary register. */
if ((op & 0xfc0007fe) == 0x7c000378) /* mr(.) Rx,Ry */
{
/* Rx must be scratch register r0. */
const int rx_regno = (op >> 16) & 31;
/* Ry: Only r3 - r10 are used for parameter passing. */
const int ry_regno = GET_SRC_REG (op);
if (rx_regno == 0 && ry_regno >= 3 && ry_regno <= 10)
{
*r0_contains_arg = 1;
return 1;
}
else
return 0;
}
/* Save a General Purpose Register on stack. */
if ((op & 0xfc1f0003) == 0xf8010000 || /* std Rx,NUM(r1) */
(op & 0xfc1f0000) == 0xd8010000) /* stfd Rx,NUM(r1) */
{
/* Rx: Only r3 - r10 are used for parameter passing. */
const int rx_regno = GET_SRC_REG (op);
return (rx_regno >= 3 && rx_regno <= 10);
}
/* Save a General Purpose Register on stack via the Frame Pointer. */
if (framep &&
((op & 0xfc1f0000) == 0x901f0000 || /* st rx,NUM(r31) */
(op & 0xfc1f0000) == 0x981f0000 || /* stb Rx,NUM(r31) */
(op & 0xfc1f0000) == 0xd81f0000)) /* stfd Rx,NUM(r31) */
{
/* Rx: Usually, only r3 - r10 are used for parameter passing.
However, the compiler sometimes uses r0 to hold an argument. */
const int rx_regno = GET_SRC_REG (op);
return ((rx_regno >= 3 && rx_regno <= 10)
|| (rx_regno == 0 && *r0_contains_arg));
}
if ((op & 0xfc1f0000) == 0xfc010000) /* frsp, fp?,NUM(r1) */
{
/* Only f2 - f8 are used for parameter passing. */
const int src_regno = GET_SRC_REG (op);
return (src_regno >= 2 && src_regno <= 8);
}
if (framep && ((op & 0xfc1f0000) == 0xfc1f0000)) /* frsp, fp?,NUM(r31) */
{
/* Only f2 - f8 are used for parameter passing. */
const int src_regno = GET_SRC_REG (op);
return (src_regno >= 2 && src_regno <= 8);
}
/* Not an insn that saves a parameter on stack. */
return 0;
}
/* Assuming that INSN is a "bl" instruction located at PC, return
nonzero if the destination of the branch is a "blrl" instruction.
This sequence is sometimes found in certain function prologues.
It allows the function to load the LR register with a value that
they can use to access PIC data using PC-relative offsets. */
static int
bl_to_blrl_insn_p (CORE_ADDR pc, int insn)
{
CORE_ADDR dest;
int immediate;
int absolute;
int dest_insn;
absolute = (int) ((insn >> 1) & 1);
immediate = ((insn & ~3) << 6) >> 6;
if (absolute)
dest = immediate;
else
dest = pc + immediate;
dest_insn = read_memory_integer (dest, 4);
if ((dest_insn & 0xfc00ffff) == 0x4c000021) /* blrl */
return 1;
return 0;
}
/* Masks for decoding a branch-and-link (bl) instruction.
BL_MASK and BL_INSTRUCTION are used in combination with each other.
The former is anded with the opcode in question; if the result of
this masking operation is equal to BL_INSTRUCTION, then the opcode in
question is a ``bl'' instruction.
BL_DISPLACMENT_MASK is anded with the opcode in order to extract
the branch displacement. */
#define BL_MASK 0xfc000001
#define BL_INSTRUCTION 0x48000001
#define BL_DISPLACEMENT_MASK 0x03fffffc
static unsigned long
rs6000_fetch_instruction (const CORE_ADDR pc)
{
gdb_byte buf[4];
unsigned long op;
/* Fetch the instruction and convert it to an integer. */
if (target_read_memory (pc, buf, 4))
return 0;
op = extract_unsigned_integer (buf, 4);
return op;
}
/* GCC generates several well-known sequences of instructions at the begining
of each function prologue when compiling with -fstack-check. If one of
such sequences starts at START_PC, then return the address of the
instruction immediately past this sequence. Otherwise, return START_PC. */
static CORE_ADDR
rs6000_skip_stack_check (const CORE_ADDR start_pc)
{
CORE_ADDR pc = start_pc;
unsigned long op = rs6000_fetch_instruction (pc);
/* First possible sequence: A small number of probes.
stw 0, -<some immediate>(1)
[repeat this instruction any (small) number of times]
*/
if ((op & 0xffff0000) == 0x90010000)
{
while ((op & 0xffff0000) == 0x90010000)
{
pc = pc + 4;
op = rs6000_fetch_instruction (pc);
}
return pc;
}
/* Second sequence: A probing loop.
addi 12,1,-<some immediate>
lis 0,-<some immediate>
[possibly ori 0,0,<some immediate>]
add 0,12,0
cmpw 0,12,0
beq 0,<disp>
addi 12,12,-<some immediate>
stw 0,0(12)
b <disp>
[possibly one last probe: stw 0,<some immediate>(12)]
*/
while (1)
{
/* addi 12,1,-<some immediate> */
if ((op & 0xffff0000) != 0x39810000)
break;
/* lis 0,-<some immediate> */
pc = pc + 4;
op = rs6000_fetch_instruction (pc);
if ((op & 0xffff0000) != 0x3c000000)
break;
pc = pc + 4;
op = rs6000_fetch_instruction (pc);
/* [possibly ori 0,0,<some immediate>] */
if ((op & 0xffff0000) == 0x60000000)
{
pc = pc + 4;
op = rs6000_fetch_instruction (pc);
}
/* add 0,12,0 */
if (op != 0x7c0c0214)
break;
/* cmpw 0,12,0 */
pc = pc + 4;
op = rs6000_fetch_instruction (pc);
if (op != 0x7c0c0000)
break;
/* beq 0,<disp> */
pc = pc + 4;
op = rs6000_fetch_instruction (pc);
if ((op & 0xff9f0001) != 0x41820000)
break;
/* addi 12,12,-<some immediate> */
pc = pc + 4;
op = rs6000_fetch_instruction (pc);
if ((op & 0xffff0000) != 0x398c0000)
break;
/* stw 0,0(12) */
pc = pc + 4;
op = rs6000_fetch_instruction (pc);
if (op != 0x900c0000)
break;
/* b <disp> */
pc = pc + 4;
op = rs6000_fetch_instruction (pc);
if ((op & 0xfc000001) != 0x48000000)
break;
/* [possibly one last probe: stw 0,<some immediate>(12)] */
pc = pc + 4;
op = rs6000_fetch_instruction (pc);
if ((op & 0xffff0000) == 0x900c0000)
{
pc = pc + 4;
op = rs6000_fetch_instruction (pc);
}
/* We found a valid stack-check sequence, return the new PC. */
return pc;
}
/* Third sequence: No probe; instead, a comparizon between the stack size
limit (saved in a run-time global variable) and the current stack
pointer:
addi 0,1,-<some immediate>
lis 12,__gnat_stack_limit@ha
lwz 12,__gnat_stack_limit@l(12)
twllt 0,12
or, with a small variant in the case of a bigger stack frame:
addis 0,1,<some immediate>
addic 0,0,-<some immediate>
lis 12,__gnat_stack_limit@ha
lwz 12,__gnat_stack_limit@l(12)
twllt 0,12
*/
while (1)
{
/* addi 0,1,-<some immediate> */
if ((op & 0xffff0000) != 0x38010000)
{
/* small stack frame variant not recognized; try the
big stack frame variant: */
/* addis 0,1,<some immediate> */
if ((op & 0xffff0000) != 0x3c010000)
break;
/* addic 0,0,-<some immediate> */
pc = pc + 4;
op = rs6000_fetch_instruction (pc);
if ((op & 0xffff0000) != 0x30000000)
break;
}
/* lis 12,<some immediate> */
pc = pc + 4;
op = rs6000_fetch_instruction (pc);
if ((op & 0xffff0000) != 0x3d800000)
break;
/* lwz 12,<some immediate>(12) */
pc = pc + 4;
op = rs6000_fetch_instruction (pc);
if ((op & 0xffff0000) != 0x818c0000)
break;
/* twllt 0,12 */
pc = pc + 4;
op = rs6000_fetch_instruction (pc);
if ((op & 0xfffffffe) != 0x7c406008)
break;
/* We found a valid stack-check sequence, return the new PC. */
return pc;
}
/* No stack check code in our prologue, return the start_pc. */
return start_pc;
}
/* return pc value after skipping a function prologue and also return
information about a function frame.
in struct rs6000_framedata fdata:
- frameless is TRUE, if function does not have a frame.
- nosavedpc is TRUE, if function does not save %pc value in its frame.
- offset is the initial size of this stack frame --- the amount by
which we decrement the sp to allocate the frame.
- saved_gpr is the number of the first saved gpr.
- saved_fpr is the number of the first saved fpr.
- saved_vr is the number of the first saved vr.
- saved_ev is the number of the first saved ev.
- alloca_reg is the number of the register used for alloca() handling.
Otherwise -1.
- gpr_offset is the offset of the first saved gpr from the previous frame.
- fpr_offset is the offset of the first saved fpr from the previous frame.
- vr_offset is the offset of the first saved vr from the previous frame.
- ev_offset is the offset of the first saved ev from the previous frame.
- lr_offset is the offset of the saved lr
- cr_offset is the offset of the saved cr
- vrsave_offset is the offset of the saved vrsave register
*/
static CORE_ADDR
skip_prologue (struct gdbarch *gdbarch, CORE_ADDR pc, CORE_ADDR lim_pc,
struct rs6000_framedata *fdata)
{
CORE_ADDR orig_pc = pc;
CORE_ADDR last_prologue_pc = pc;
CORE_ADDR li_found_pc = 0;
gdb_byte buf[4];
unsigned long op;
long offset = 0;
long vr_saved_offset = 0;
int lr_reg = -1;
int cr_reg = -1;
int vr_reg = -1;
int ev_reg = -1;
long ev_offset = 0;
int vrsave_reg = -1;
int reg;
int framep = 0;
int minimal_toc_loaded = 0;
int prev_insn_was_prologue_insn = 1;
int num_skip_non_prologue_insns = 0;
int r0_contains_arg = 0;
const struct bfd_arch_info *arch_info = gdbarch_bfd_arch_info (gdbarch);
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
memset (fdata, 0, sizeof (struct rs6000_framedata));
fdata->saved_gpr = -1;
fdata->saved_fpr = -1;
fdata->saved_vr = -1;
fdata->saved_ev = -1;
fdata->alloca_reg = -1;
fdata->frameless = 1;
fdata->nosavedpc = 1;
fdata->lr_register = -1;
pc = rs6000_skip_stack_check (pc);
if (pc >= lim_pc)
pc = lim_pc;
for (;; pc += 4)
{
/* Sometimes it isn't clear if an instruction is a prologue
instruction or not. When we encounter one of these ambiguous
cases, we'll set prev_insn_was_prologue_insn to 0 (false).
Otherwise, we'll assume that it really is a prologue instruction. */
if (prev_insn_was_prologue_insn)
last_prologue_pc = pc;
/* Stop scanning if we've hit the limit. */
if (pc >= lim_pc)
break;
prev_insn_was_prologue_insn = 1;
/* Fetch the instruction and convert it to an integer. */
if (target_read_memory (pc, buf, 4))
break;
op = extract_unsigned_integer (buf, 4);
if ((op & 0xfc1fffff) == 0x7c0802a6)
{ /* mflr Rx */
/* Since shared library / PIC code, which needs to get its
address at runtime, can appear to save more than one link
register vis:
*INDENT-OFF*
stwu r1,-304(r1)
mflr r3
bl 0xff570d0 (blrl)
stw r30,296(r1)
mflr r30
stw r31,300(r1)
stw r3,308(r1);
...
*INDENT-ON*
remember just the first one, but skip over additional
ones. */
if (lr_reg == -1)
lr_reg = (op & 0x03e00000) >> 21;
if (lr_reg == 0)
r0_contains_arg = 0;
continue;
}
else if ((op & 0xfc1fffff) == 0x7c000026)
{ /* mfcr Rx */
cr_reg = (op & 0x03e00000);
if (cr_reg == 0)
r0_contains_arg = 0;
continue;
}
else if ((op & 0xfc1f0000) == 0xd8010000)
{ /* stfd Rx,NUM(r1) */
reg = GET_SRC_REG (op);
if (fdata->saved_fpr == -1 || fdata->saved_fpr > reg)
{
fdata->saved_fpr = reg;
fdata->fpr_offset = SIGNED_SHORT (op) + offset;
}
continue;
}
else if (((op & 0xfc1f0000) == 0xbc010000) || /* stm Rx, NUM(r1) */
(((op & 0xfc1f0000) == 0x90010000 || /* st rx,NUM(r1) */
(op & 0xfc1f0003) == 0xf8010000) && /* std rx,NUM(r1) */
(op & 0x03e00000) >= 0x01a00000)) /* rx >= r13 */
{
reg = GET_SRC_REG (op);
if ((op & 0xfc1f0000) == 0xbc010000)
fdata->gpr_mask |= ~((1U << reg) - 1);
else
fdata->gpr_mask |= 1U << reg;
if (fdata->saved_gpr == -1 || fdata->saved_gpr > reg)
{
fdata->saved_gpr = reg;
if ((op & 0xfc1f0003) == 0xf8010000)
op &= ~3UL;
fdata->gpr_offset = SIGNED_SHORT (op) + offset;
}
continue;
}
else if ((op & 0xffff0000) == 0x60000000)
{
/* nop */
/* Allow nops in the prologue, but do not consider them to
be part of the prologue unless followed by other prologue
instructions. */
prev_insn_was_prologue_insn = 0;
continue;
}
else if ((op & 0xffff0000) == 0x3c000000)
{ /* addis 0,0,NUM, used
for >= 32k frames */
fdata->offset = (op & 0x0000ffff) << 16;
fdata->frameless = 0;
r0_contains_arg = 0;
continue;
}
else if ((op & 0xffff0000) == 0x60000000)
{ /* ori 0,0,NUM, 2nd ha
lf of >= 32k frames */
fdata->offset |= (op & 0x0000ffff);
fdata->frameless = 0;
r0_contains_arg = 0;
continue;
}
else if (lr_reg >= 0 &&
/* std Rx, NUM(r1) || stdu Rx, NUM(r1) */
(((op & 0xffff0000) == (lr_reg | 0xf8010000)) ||
/* stw Rx, NUM(r1) */
((op & 0xffff0000) == (lr_reg | 0x90010000)) ||
/* stwu Rx, NUM(r1) */
((op & 0xffff0000) == (lr_reg | 0x94010000))))
{ /* where Rx == lr */
fdata->lr_offset = offset;
fdata->nosavedpc = 0;
/* Invalidate lr_reg, but don't set it to -1.
That would mean that it had never been set. */
lr_reg = -2;
if ((op & 0xfc000003) == 0xf8000000 || /* std */
(op & 0xfc000000) == 0x90000000) /* stw */
{
/* Does not update r1, so add displacement to lr_offset. */
fdata->lr_offset += SIGNED_SHORT (op);
}
continue;
}
else if (cr_reg >= 0 &&
/* std Rx, NUM(r1) || stdu Rx, NUM(r1) */
(((op & 0xffff0000) == (cr_reg | 0xf8010000)) ||
/* stw Rx, NUM(r1) */
((op & 0xffff0000) == (cr_reg | 0x90010000)) ||
/* stwu Rx, NUM(r1) */
((op & 0xffff0000) == (cr_reg | 0x94010000))))
{ /* where Rx == cr */
fdata->cr_offset = offset;
/* Invalidate cr_reg, but don't set it to -1.
That would mean that it had never been set. */
cr_reg = -2;
if ((op & 0xfc000003) == 0xf8000000 ||
(op & 0xfc000000) == 0x90000000)
{
/* Does not update r1, so add displacement to cr_offset. */
fdata->cr_offset += SIGNED_SHORT (op);
}
continue;
}
else if ((op & 0xfe80ffff) == 0x42800005 && lr_reg != -1)
{
/* bcl 20,xx,.+4 is used to get the current PC, with or without
prediction bits. If the LR has already been saved, we can
skip it. */
continue;
}
else if (op == 0x48000005)
{ /* bl .+4 used in
-mrelocatable */
fdata->used_bl = 1;
continue;
}
else if (op == 0x48000004)
{ /* b .+4 (xlc) */
break;
}
else if ((op & 0xffff0000) == 0x3fc00000 || /* addis 30,0,foo@ha, used
in V.4 -mminimal-toc */
(op & 0xffff0000) == 0x3bde0000)
{ /* addi 30,30,foo@l */
continue;
}
else if ((op & 0xfc000001) == 0x48000001)
{ /* bl foo,
to save fprs??? */
fdata->frameless = 0;
/* If the return address has already been saved, we can skip
calls to blrl (for PIC). */
if (lr_reg != -1 && bl_to_blrl_insn_p (pc, op))
{
fdata->used_bl = 1;
continue;
}
/* Don't skip over the subroutine call if it is not within
the first three instructions of the prologue and either
we have no line table information or the line info tells
us that the subroutine call is not part of the line
associated with the prologue. */
if ((pc - orig_pc) > 8)
{
struct symtab_and_line prologue_sal = find_pc_line (orig_pc, 0);
struct symtab_and_line this_sal = find_pc_line (pc, 0);
if ((prologue_sal.line == 0) || (prologue_sal.line != this_sal.line))
break;
}
op = read_memory_integer (pc + 4, 4);
/* At this point, make sure this is not a trampoline
function (a function that simply calls another functions,
and nothing else). If the next is not a nop, this branch
was part of the function prologue. */
if (op == 0x4def7b82 || op == 0) /* crorc 15, 15, 15 */
break; /* don't skip over
this branch */
fdata->used_bl = 1;
continue;
}
/* update stack pointer */
else if ((op & 0xfc1f0000) == 0x94010000)
{ /* stu rX,NUM(r1) || stwu rX,NUM(r1) */
fdata->frameless = 0;
fdata->offset = SIGNED_SHORT (op);
offset = fdata->offset;
continue;
}
else if ((op & 0xfc1f016a) == 0x7c01016e)
{ /* stwux rX,r1,rY */
/* no way to figure out what r1 is going to be */
fdata->frameless = 0;
offset = fdata->offset;
continue;
}
else if ((op & 0xfc1f0003) == 0xf8010001)
{ /* stdu rX,NUM(r1) */
fdata->frameless = 0;
fdata->offset = SIGNED_SHORT (op & ~3UL);
offset = fdata->offset;
continue;
}
else if ((op & 0xfc1f016a) == 0x7c01016a)
{ /* stdux rX,r1,rY */
/* no way to figure out what r1 is going to be */
fdata->frameless = 0;
offset = fdata->offset;
continue;
}
else if ((op & 0xffff0000) == 0x38210000)
{ /* addi r1,r1,SIMM */
fdata->frameless = 0;
fdata->offset += SIGNED_SHORT (op);
offset = fdata->offset;
continue;
}
/* Load up minimal toc pointer. Do not treat an epilogue restore
of r31 as a minimal TOC load. */
else if (((op >> 22) == 0x20f || /* l r31,... or l r30,... */
(op >> 22) == 0x3af) /* ld r31,... or ld r30,... */
&& !framep
&& !minimal_toc_loaded)
{
minimal_toc_loaded = 1;
continue;
/* move parameters from argument registers to local variable
registers */
}
else if ((op & 0xfc0007fe) == 0x7c000378 && /* mr(.) Rx,Ry */
(((op >> 21) & 31) >= 3) && /* R3 >= Ry >= R10 */
(((op >> 21) & 31) <= 10) &&
((long) ((op >> 16) & 31) >= fdata->saved_gpr)) /* Rx: local var reg */
{
continue;
/* store parameters in stack */
}
/* Move parameters from argument registers to temporary register. */
else if (store_param_on_stack_p (op, framep, &r0_contains_arg))
{
continue;
/* Set up frame pointer */
}
else if (op == 0x603f0000 /* oril r31, r1, 0x0 */
|| op == 0x7c3f0b78)
{ /* mr r31, r1 */
fdata->frameless = 0;
framep = 1;
fdata->alloca_reg = (tdep->ppc_gp0_regnum + 31);
continue;
/* Another way to set up the frame pointer. */
}
else if ((op & 0xfc1fffff) == 0x38010000)
{ /* addi rX, r1, 0x0 */
fdata->frameless = 0;
framep = 1;
fdata->alloca_reg = (tdep->ppc_gp0_regnum
+ ((op & ~0x38010000) >> 21));
continue;
}
/* AltiVec related instructions. */
/* Store the vrsave register (spr 256) in another register for
later manipulation, or load a register into the vrsave
register. 2 instructions are used: mfvrsave and
mtvrsave. They are shorthand notation for mfspr Rn, SPR256
and mtspr SPR256, Rn. */
/* mfspr Rn SPR256 == 011111 nnnnn 0000001000 01010100110
mtspr SPR256 Rn == 011111 nnnnn 0000001000 01110100110 */
else if ((op & 0xfc1fffff) == 0x7c0042a6) /* mfvrsave Rn */
{
vrsave_reg = GET_SRC_REG (op);
continue;
}
else if ((op & 0xfc1fffff) == 0x7c0043a6) /* mtvrsave Rn */
{
continue;
}
/* Store the register where vrsave was saved to onto the stack:
rS is the register where vrsave was stored in a previous
instruction. */
/* 100100 sssss 00001 dddddddd dddddddd */
else if ((op & 0xfc1f0000) == 0x90010000) /* stw rS, d(r1) */
{
if (vrsave_reg == GET_SRC_REG (op))
{
fdata->vrsave_offset = SIGNED_SHORT (op) + offset;
vrsave_reg = -1;
}
continue;
}
/* Compute the new value of vrsave, by modifying the register
where vrsave was saved to. */
else if (((op & 0xfc000000) == 0x64000000) /* oris Ra, Rs, UIMM */
|| ((op & 0xfc000000) == 0x60000000))/* ori Ra, Rs, UIMM */
{
continue;
}
/* li r0, SIMM (short for addi r0, 0, SIMM). This is the first
in a pair of insns to save the vector registers on the
stack. */
/* 001110 00000 00000 iiii iiii iiii iiii */
/* 001110 01110 00000 iiii iiii iiii iiii */
else if ((op & 0xffff0000) == 0x38000000 /* li r0, SIMM */
|| (op & 0xffff0000) == 0x39c00000) /* li r14, SIMM */
{
if ((op & 0xffff0000) == 0x38000000)
r0_contains_arg = 0;
li_found_pc = pc;
vr_saved_offset = SIGNED_SHORT (op);
/* This insn by itself is not part of the prologue, unless
if part of the pair of insns mentioned above. So do not
record this insn as part of the prologue yet. */
prev_insn_was_prologue_insn = 0;
}
/* Store vector register S at (r31+r0) aligned to 16 bytes. */
/* 011111 sssss 11111 00000 00111001110 */
else if ((op & 0xfc1fffff) == 0x7c1f01ce) /* stvx Vs, R31, R0 */
{
if (pc == (li_found_pc + 4))
{
vr_reg = GET_SRC_REG (op);
/* If this is the first vector reg to be saved, or if
it has a lower number than others previously seen,
reupdate the frame info. */
if (fdata->saved_vr == -1 || fdata->saved_vr > vr_reg)
{
fdata->saved_vr = vr_reg;
fdata->vr_offset = vr_saved_offset + offset;
}
vr_saved_offset = -1;
vr_reg = -1;
li_found_pc = 0;
}
}
/* End AltiVec related instructions. */
/* Start BookE related instructions. */
/* Store gen register S at (r31+uimm).
Any register less than r13 is volatile, so we don't care. */
/* 000100 sssss 11111 iiiii 01100100001 */
else if (arch_info->mach == bfd_mach_ppc_e500
&& (op & 0xfc1f07ff) == 0x101f0321) /* evstdd Rs,uimm(R31) */
{
if ((op & 0x03e00000) >= 0x01a00000) /* Rs >= r13 */
{
unsigned int imm;
ev_reg = GET_SRC_REG (op);
imm = (op >> 11) & 0x1f;
ev_offset = imm * 8;
/* If this is the first vector reg to be saved, or if
it has a lower number than others previously seen,
reupdate the frame info. */
if (fdata->saved_ev == -1 || fdata->saved_ev > ev_reg)
{
fdata->saved_ev = ev_reg;
fdata->ev_offset = ev_offset + offset;
}
}
continue;
}
/* Store gen register rS at (r1+rB). */
/* 000100 sssss 00001 bbbbb 01100100000 */
else if (arch_info->mach == bfd_mach_ppc_e500
&& (op & 0xffe007ff) == 0x13e00320) /* evstddx RS,R1,Rb */
{
if (pc == (li_found_pc + 4))
{
ev_reg = GET_SRC_REG (op);
/* If this is the first vector reg to be saved, or if
it has a lower number than others previously seen,
reupdate the frame info. */
/* We know the contents of rB from the previous instruction. */
if (fdata->saved_ev == -1 || fdata->saved_ev > ev_reg)
{
fdata->saved_ev = ev_reg;
fdata->ev_offset = vr_saved_offset + offset;
}
vr_saved_offset = -1;
ev_reg = -1;
li_found_pc = 0;
}
continue;
}
/* Store gen register r31 at (rA+uimm). */
/* 000100 11111 aaaaa iiiii 01100100001 */
else if (arch_info->mach == bfd_mach_ppc_e500
&& (op & 0xffe007ff) == 0x13e00321) /* evstdd R31,Ra,UIMM */
{
/* Wwe know that the source register is 31 already, but
it can't hurt to compute it. */
ev_reg = GET_SRC_REG (op);
ev_offset = ((op >> 11) & 0x1f) * 8;
/* If this is the first vector reg to be saved, or if
it has a lower number than others previously seen,
reupdate the frame info. */
if (fdata->saved_ev == -1 || fdata->saved_ev > ev_reg)
{
fdata->saved_ev = ev_reg;
fdata->ev_offset = ev_offset + offset;
}
continue;
}
/* Store gen register S at (r31+r0).
Store param on stack when offset from SP bigger than 4 bytes. */
/* 000100 sssss 11111 00000 01100100000 */
else if (arch_info->mach == bfd_mach_ppc_e500
&& (op & 0xfc1fffff) == 0x101f0320) /* evstddx Rs,R31,R0 */
{
if (pc == (li_found_pc + 4))
{
if ((op & 0x03e00000) >= 0x01a00000)
{
ev_reg = GET_SRC_REG (op);
/* If this is the first vector reg to be saved, or if
it has a lower number than others previously seen,
reupdate the frame info. */
/* We know the contents of r0 from the previous
instruction. */
if (fdata->saved_ev == -1 || fdata->saved_ev > ev_reg)
{
fdata->saved_ev = ev_reg;
fdata->ev_offset = vr_saved_offset + offset;
}
ev_reg = -1;
}
vr_saved_offset = -1;
li_found_pc = 0;
continue;
}
}
/* End BookE related instructions. */
else
{
unsigned int all_mask = ~((1U << fdata->saved_gpr) - 1);
/* Not a recognized prologue instruction.
Handle optimizer code motions into the prologue by continuing
the search if we have no valid frame yet or if the return
address is not yet saved in the frame. Also skip instructions
if some of the GPRs expected to be saved are not yet saved. */
if (fdata->frameless == 0 && fdata->nosavedpc == 0
&& (fdata->gpr_mask & all_mask) == all_mask)
break;
if (op == 0x4e800020 /* blr */
|| op == 0x4e800420) /* bctr */
/* Do not scan past epilogue in frameless functions or
trampolines. */
break;
if ((op & 0xf4000000) == 0x40000000) /* bxx */
/* Never skip branches. */
break;
if (num_skip_non_prologue_insns++ > max_skip_non_prologue_insns)
/* Do not scan too many insns, scanning insns is expensive with
remote targets. */
break;
/* Continue scanning. */
prev_insn_was_prologue_insn = 0;
continue;
}
}
#if 0
/* I have problems with skipping over __main() that I need to address
* sometime. Previously, I used to use misc_function_vector which
* didn't work as well as I wanted to be. -MGO */
/* If the first thing after skipping a prolog is a branch to a function,
this might be a call to an initializer in main(), introduced by gcc2.
We'd like to skip over it as well. Fortunately, xlc does some extra
work before calling a function right after a prologue, thus we can
single out such gcc2 behaviour. */
if ((op & 0xfc000001) == 0x48000001)
{ /* bl foo, an initializer function? */
op = read_memory_integer (pc + 4, 4);
if (op == 0x4def7b82)
{ /* cror 0xf, 0xf, 0xf (nop) */
/* Check and see if we are in main. If so, skip over this
initializer function as well. */
tmp = find_pc_misc_function (pc);
if (tmp >= 0
&& strcmp (misc_function_vector[tmp].name, main_name ()) == 0)
return pc + 8;
}
}
#endif /* 0 */
if (pc == lim_pc && lr_reg >= 0)
fdata->lr_register = lr_reg;
fdata->offset = -fdata->offset;
return last_prologue_pc;
}
static CORE_ADDR
rs6000_skip_prologue (struct gdbarch *gdbarch, CORE_ADDR pc)
{
struct rs6000_framedata frame;
CORE_ADDR limit_pc, func_addr;
/* See if we can determine the end of the prologue via the symbol table.
If so, then return either PC, or the PC after the prologue, whichever
is greater. */
if (find_pc_partial_function (pc, NULL, &func_addr, NULL))
{
CORE_ADDR post_prologue_pc = skip_prologue_using_sal (func_addr);
if (post_prologue_pc != 0)
return max (pc, post_prologue_pc);
}
/* Can't determine prologue from the symbol table, need to examine
instructions. */
/* Find an upper limit on the function prologue using the debug
information. If the debug information could not be used to provide
that bound, then use an arbitrary large number as the upper bound. */
limit_pc = skip_prologue_using_sal (pc);
if (limit_pc == 0)
limit_pc = pc + 100; /* Magic. */
pc = skip_prologue (gdbarch, pc, limit_pc, &frame);
return pc;
}
/* When compiling for EABI, some versions of GCC emit a call to __eabi
in the prologue of main().
The function below examines the code pointed at by PC and checks to
see if it corresponds to a call to __eabi. If so, it returns the
address of the instruction following that call. Otherwise, it simply
returns PC. */
static CORE_ADDR
rs6000_skip_main_prologue (struct gdbarch *gdbarch, CORE_ADDR pc)
{
gdb_byte buf[4];
unsigned long op;
if (target_read_memory (pc, buf, 4))
return pc;
op = extract_unsigned_integer (buf, 4);
if ((op & BL_MASK) == BL_INSTRUCTION)
{
CORE_ADDR displ = op & BL_DISPLACEMENT_MASK;
CORE_ADDR call_dest = pc + 4 + displ;
struct minimal_symbol *s = lookup_minimal_symbol_by_pc (call_dest);
/* We check for ___eabi (three leading underscores) in addition
to __eabi in case the GCC option "-fleading-underscore" was
used to compile the program. */
if (s != NULL
&& SYMBOL_LINKAGE_NAME (s) != NULL
&& (strcmp (SYMBOL_LINKAGE_NAME (s), "__eabi") == 0
|| strcmp (SYMBOL_LINKAGE_NAME (s), "___eabi") == 0))
pc += 4;
}
return pc;
}
/* All the ABI's require 16 byte alignment. */
static CORE_ADDR
rs6000_frame_align (struct gdbarch *gdbarch, CORE_ADDR addr)
{
return (addr & -16);
}
/* Return whether handle_inferior_event() should proceed through code
starting at PC in function NAME when stepping.
The AIX -bbigtoc linker option generates functions @FIX0, @FIX1, etc. to
handle memory references that are too distant to fit in instructions
generated by the compiler. For example, if 'foo' in the following
instruction:
lwz r9,foo(r2)
is greater than 32767, the linker might replace the lwz with a branch to
somewhere in @FIX1 that does the load in 2 instructions and then branches
back to where execution should continue.
GDB should silently step over @FIX code, just like AIX dbx does.
Unfortunately, the linker uses the "b" instruction for the
branches, meaning that the link register doesn't get set.
Therefore, GDB's usual step_over_function () mechanism won't work.
Instead, use the gdbarch_skip_trampoline_code and
gdbarch_skip_trampoline_code hooks in handle_inferior_event() to skip past
@FIX code. */
static int
rs6000_in_solib_return_trampoline (CORE_ADDR pc, char *name)
{
return name && !strncmp (name, "@FIX", 4);
}
/* Skip code that the user doesn't want to see when stepping:
1. Indirect function calls use a piece of trampoline code to do context
switching, i.e. to set the new TOC table. Skip such code if we are on
its first instruction (as when we have single-stepped to here).
2. Skip shared library trampoline code (which is different from
indirect function call trampolines).
3. Skip bigtoc fixup code.
Result is desired PC to step until, or NULL if we are not in
code that should be skipped. */
static CORE_ADDR
rs6000_skip_trampoline_code (struct frame_info *frame, CORE_ADDR pc)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (get_frame_arch (frame));
unsigned int ii, op;
int rel;
CORE_ADDR solib_target_pc;
struct minimal_symbol *msymbol;
static unsigned trampoline_code[] =
{
0x800b0000, /* l r0,0x0(r11) */
0x90410014, /* st r2,0x14(r1) */
0x7c0903a6, /* mtctr r0 */
0x804b0004, /* l r2,0x4(r11) */
0x816b0008, /* l r11,0x8(r11) */
0x4e800420, /* bctr */
0x4e800020, /* br */
0
};
/* Check for bigtoc fixup code. */
msymbol = lookup_minimal_symbol_by_pc (pc);
if (msymbol
&& rs6000_in_solib_return_trampoline (pc, SYMBOL_LINKAGE_NAME (msymbol)))
{
/* Double-check that the third instruction from PC is relative "b". */
op = read_memory_integer (pc + 8, 4);
if ((op & 0xfc000003) == 0x48000000)
{
/* Extract bits 6-29 as a signed 24-bit relative word address and
add it to the containing PC. */
rel = ((int)(op << 6) >> 6);
return pc + 8 + rel;
}
}
/* If pc is in a shared library trampoline, return its target. */
solib_target_pc = find_solib_trampoline_target (frame, pc);
if (solib_target_pc)
return solib_target_pc;
for (ii = 0; trampoline_code[ii]; ++ii)
{
op = read_memory_integer (pc + (ii * 4), 4);
if (op != trampoline_code[ii])
return 0;
}
ii = get_frame_register_unsigned (frame, 11); /* r11 holds destination addr */
pc = read_memory_unsigned_integer (ii, tdep->wordsize); /* (r11) value */
return pc;
}
/* ISA-specific vector types. */
static struct type *
rs6000_builtin_type_vec64 (struct gdbarch *gdbarch)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
if (!tdep->ppc_builtin_type_vec64)
{
/* The type we're building is this: */
#if 0
union __gdb_builtin_type_vec64
{
int64_t uint64;
float v2_float[2];
int32_t v2_int32[2];
int16_t v4_int16[4];
int8_t v8_int8[8];
};
#endif
struct type *t;
t = init_composite_type ("__ppc_builtin_type_vec64", TYPE_CODE_UNION);
append_composite_type_field (t, "uint64", builtin_type_int64);
append_composite_type_field (t, "v2_float",
init_vector_type (builtin_type (gdbarch)
->builtin_float, 2));
append_composite_type_field (t, "v2_int32",
init_vector_type (builtin_type_int32, 2));
append_composite_type_field (t, "v4_int16",
init_vector_type (builtin_type_int16, 4));
append_composite_type_field (t, "v8_int8",
init_vector_type (builtin_type_int8, 8));
TYPE_VECTOR (t) = 1;
TYPE_NAME (t) = "ppc_builtin_type_vec64";
tdep->ppc_builtin_type_vec64 = t;
}
return tdep->ppc_builtin_type_vec64;
}
/* Vector 128 type. */
static struct type *
rs6000_builtin_type_vec128 (struct gdbarch *gdbarch)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
if (!tdep->ppc_builtin_type_vec128)
{
/* The type we're building is this
type = union __ppc_builtin_type_vec128 {
uint128_t uint128;
float v4_float[4];
int32_t v4_int32[4];
int16_t v8_int16[8];
int8_t v16_int8[16];
}
*/
struct type *t;
t = init_composite_type ("__ppc_builtin_type_vec128", TYPE_CODE_UNION);
append_composite_type_field (t, "uint128", builtin_type_uint128);
append_composite_type_field (t, "v4_float",
init_vector_type (builtin_type (gdbarch)->builtin_float, 4));
append_composite_type_field (t, "v4_int32",
init_vector_type (builtin_type_int32, 4));
append_composite_type_field (t, "v8_int16",
init_vector_type (builtin_type_int16, 8));
append_composite_type_field (t, "v16_int8",
init_vector_type (builtin_type_int8, 16));
TYPE_VECTOR (t) = 1;
TYPE_NAME (t) = "ppc_builtin_type_vec128";
tdep->ppc_builtin_type_vec128 = t;
}
return tdep->ppc_builtin_type_vec128;
}
/* Return the name of register number REGNO, or the empty string if it
is an anonymous register. */
static const char *
rs6000_register_name (struct gdbarch *gdbarch, int regno)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
/* The upper half "registers" have names in the XML description,
but we present only the low GPRs and the full 64-bit registers
to the user. */
if (tdep->ppc_ev0_upper_regnum >= 0
&& tdep->ppc_ev0_upper_regnum <= regno
&& regno < tdep->ppc_ev0_upper_regnum + ppc_num_gprs)
return "";
/* Hide the upper halves of the vs0~vs31 registers. */
if (tdep->ppc_vsr0_regnum >= 0
&& tdep->ppc_vsr0_upper_regnum <= regno
&& regno < tdep->ppc_vsr0_upper_regnum + ppc_num_gprs)
return "";
/* Check if the SPE pseudo registers are available. */
if (IS_SPE_PSEUDOREG (tdep, regno))
{
static const char *const spe_regnames[] = {
"ev0", "ev1", "ev2", "ev3", "ev4", "ev5", "ev6", "ev7",
"ev8", "ev9", "ev10", "ev11", "ev12", "ev13", "ev14", "ev15",
"ev16", "ev17", "ev18", "ev19", "ev20", "ev21", "ev22", "ev23",
"ev24", "ev25", "ev26", "ev27", "ev28", "ev29", "ev30", "ev31",
};
return spe_regnames[regno - tdep->ppc_ev0_regnum];
}
/* Check if the decimal128 pseudo-registers are available. */
if (IS_DFP_PSEUDOREG (tdep, regno))
{
static const char *const dfp128_regnames[] = {
"dl0", "dl1", "dl2", "dl3",
"dl4", "dl5", "dl6", "dl7",
"dl8", "dl9", "dl10", "dl11",
"dl12", "dl13", "dl14", "dl15"
};
return dfp128_regnames[regno - tdep->ppc_dl0_regnum];
}
/* Check if this is a VSX pseudo-register. */
if (IS_VSX_PSEUDOREG (tdep, regno))
{
static const char *const vsx_regnames[] = {
"vs0", "vs1", "vs2", "vs3", "vs4", "vs5", "vs6", "vs7",
"vs8", "vs9", "vs10", "vs11", "vs12", "vs13", "vs14",
"vs15", "vs16", "vs17", "vs18", "vs19", "vs20", "vs21",
"vs22", "vs23", "vs24", "vs25", "vs26", "vs27", "vs28",
"vs29", "vs30", "vs31", "vs32", "vs33", "vs34", "vs35",
"vs36", "vs37", "vs38", "vs39", "vs40", "vs41", "vs42",
"vs43", "vs44", "vs45", "vs46", "vs47", "vs48", "vs49",
"vs50", "vs51", "vs52", "vs53", "vs54", "vs55", "vs56",
"vs57", "vs58", "vs59", "vs60", "vs61", "vs62", "vs63"
};
return vsx_regnames[regno - tdep->ppc_vsr0_regnum];
}
/* Check if the this is a Extended FP pseudo-register. */
if (IS_EFP_PSEUDOREG (tdep, regno))
{
static const char *const efpr_regnames[] = {
"f32", "f33", "f34", "f35", "f36", "f37", "f38",
"f39", "f40", "f41", "f42", "f43", "f44", "f45",
"f46", "f47", "f48", "f49", "f50", "f51",
"f52", "f53", "f54", "f55", "f56", "f57",
"f58", "f59", "f60", "f61", "f62", "f63"
};
return efpr_regnames[regno - tdep->ppc_efpr0_regnum];
}
return tdesc_register_name (gdbarch, regno);
}
/* Return the GDB type object for the "standard" data type of data in
register N. */
static struct type *
rs6000_pseudo_register_type (struct gdbarch *gdbarch, int regnum)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
/* These are the only pseudo-registers we support. */
gdb_assert (IS_SPE_PSEUDOREG (tdep, regnum)
|| IS_DFP_PSEUDOREG (tdep, regnum)
|| IS_VSX_PSEUDOREG (tdep, regnum)
|| IS_EFP_PSEUDOREG (tdep, regnum));
/* These are the e500 pseudo-registers. */
if (IS_SPE_PSEUDOREG (tdep, regnum))
return rs6000_builtin_type_vec64 (gdbarch);
else if (IS_DFP_PSEUDOREG (tdep, regnum))
/* PPC decimal128 pseudo-registers. */
return builtin_type (gdbarch)->builtin_declong;
else if (IS_VSX_PSEUDOREG (tdep, regnum))
/* POWER7 VSX pseudo-registers. */
return rs6000_builtin_type_vec128 (gdbarch);
else
/* POWER7 Extended FP pseudo-registers. */
return builtin_type (gdbarch)->builtin_double;
}
/* Is REGNUM a member of REGGROUP? */
static int
rs6000_pseudo_register_reggroup_p (struct gdbarch *gdbarch, int regnum,
struct reggroup *group)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
/* These are the only pseudo-registers we support. */
gdb_assert (IS_SPE_PSEUDOREG (tdep, regnum)
|| IS_DFP_PSEUDOREG (tdep, regnum)
|| IS_VSX_PSEUDOREG (tdep, regnum)
|| IS_EFP_PSEUDOREG (tdep, regnum));
/* These are the e500 pseudo-registers or the POWER7 VSX registers. */
if (IS_SPE_PSEUDOREG (tdep, regnum) || IS_VSX_PSEUDOREG (tdep, regnum))
return group == all_reggroup || group == vector_reggroup;
else
/* PPC decimal128 or Extended FP pseudo-registers. */
return group == all_reggroup || group == float_reggroup;
}
/* The register format for RS/6000 floating point registers is always
double, we need a conversion if the memory format is float. */
static int
rs6000_convert_register_p (struct gdbarch *gdbarch, int regnum,
struct type *type)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
return (tdep->ppc_fp0_regnum >= 0
&& regnum >= tdep->ppc_fp0_regnum
&& regnum < tdep->ppc_fp0_regnum + ppc_num_fprs
&& TYPE_CODE (type) == TYPE_CODE_FLT
&& TYPE_LENGTH (type)
!= TYPE_LENGTH (builtin_type (gdbarch)->builtin_double));
}
static void
rs6000_register_to_value (struct frame_info *frame,
int regnum,
struct type *type,
gdb_byte *to)
{
struct gdbarch *gdbarch = get_frame_arch (frame);
gdb_byte from[MAX_REGISTER_SIZE];
gdb_assert (TYPE_CODE (type) == TYPE_CODE_FLT);
get_frame_register (frame, regnum, from);
convert_typed_floating (from, builtin_type (gdbarch)->builtin_double,
to, type);
}
static void
rs6000_value_to_register (struct frame_info *frame,
int regnum,
struct type *type,
const gdb_byte *from)
{
struct gdbarch *gdbarch = get_frame_arch (frame);
gdb_byte to[MAX_REGISTER_SIZE];
gdb_assert (TYPE_CODE (type) == TYPE_CODE_FLT);
convert_typed_floating (from, type,
to, builtin_type (gdbarch)->builtin_double);
put_frame_register (frame, regnum, to);
}
/* Move SPE vector register values between a 64-bit buffer and the two
32-bit raw register halves in a regcache. This function handles
both splitting a 64-bit value into two 32-bit halves, and joining
two halves into a whole 64-bit value, depending on the function
passed as the MOVE argument.
EV_REG must be the number of an SPE evN vector register --- a
pseudoregister. REGCACHE must be a regcache, and BUFFER must be a
64-bit buffer.
Call MOVE once for each 32-bit half of that register, passing
REGCACHE, the number of the raw register corresponding to that
half, and the address of the appropriate half of BUFFER.
For example, passing 'regcache_raw_read' as the MOVE function will
fill BUFFER with the full 64-bit contents of EV_REG. Or, passing
'regcache_raw_supply' will supply the contents of BUFFER to the
appropriate pair of raw registers in REGCACHE.
You may need to cast away some 'const' qualifiers when passing
MOVE, since this function can't tell at compile-time which of
REGCACHE or BUFFER is acting as the source of the data. If C had
co-variant type qualifiers, ... */
static void
e500_move_ev_register (void (*move) (struct regcache *regcache,
int regnum, gdb_byte *buf),
struct regcache *regcache, int ev_reg,
gdb_byte *buffer)
{
struct gdbarch *arch = get_regcache_arch (regcache);
struct gdbarch_tdep *tdep = gdbarch_tdep (arch);
int reg_index;
gdb_byte *byte_buffer = buffer;
gdb_assert (IS_SPE_PSEUDOREG (tdep, ev_reg));
reg_index = ev_reg - tdep->ppc_ev0_regnum;
if (gdbarch_byte_order (arch) == BFD_ENDIAN_BIG)
{
move (regcache, tdep->ppc_ev0_upper_regnum + reg_index, byte_buffer);
move (regcache, tdep->ppc_gp0_regnum + reg_index, byte_buffer + 4);
}
else
{
move (regcache, tdep->ppc_gp0_regnum + reg_index, byte_buffer);
move (regcache, tdep->ppc_ev0_upper_regnum + reg_index, byte_buffer + 4);
}
}
static void
e500_pseudo_register_read (struct gdbarch *gdbarch, struct regcache *regcache,
int reg_nr, gdb_byte *buffer)
{
e500_move_ev_register (regcache_raw_read, regcache, reg_nr, buffer);
}
static void
e500_pseudo_register_write (struct gdbarch *gdbarch, struct regcache *regcache,
int reg_nr, const gdb_byte *buffer)
{
e500_move_ev_register ((void (*) (struct regcache *, int, gdb_byte *))
regcache_raw_write,
regcache, reg_nr, (gdb_byte *) buffer);
}
/* Read method for DFP pseudo-registers. */
static void
dfp_pseudo_register_read (struct gdbarch *gdbarch, struct regcache *regcache,
int reg_nr, gdb_byte *buffer)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
int reg_index = reg_nr - tdep->ppc_dl0_regnum;
if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG)
{
/* Read two FP registers to form a whole dl register. */
regcache_raw_read (regcache, tdep->ppc_fp0_regnum +
2 * reg_index, buffer);
regcache_raw_read (regcache, tdep->ppc_fp0_regnum +
2 * reg_index + 1, buffer + 8);
}
else
{
regcache_raw_read (regcache, tdep->ppc_fp0_regnum +
2 * reg_index + 1, buffer + 8);
regcache_raw_read (regcache, tdep->ppc_fp0_regnum +
2 * reg_index, buffer);
}
}
/* Write method for DFP pseudo-registers. */
static void
dfp_pseudo_register_write (struct gdbarch *gdbarch, struct regcache *regcache,
int reg_nr, const gdb_byte *buffer)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
int reg_index = reg_nr - tdep->ppc_dl0_regnum;
if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG)
{
/* Write each half of the dl register into a separate
FP register. */
regcache_raw_write (regcache, tdep->ppc_fp0_regnum +
2 * reg_index, buffer);
regcache_raw_write (regcache, tdep->ppc_fp0_regnum +
2 * reg_index + 1, buffer + 8);
}
else
{
regcache_raw_write (regcache, tdep->ppc_fp0_regnum +
2 * reg_index + 1, buffer + 8);
regcache_raw_write (regcache, tdep->ppc_fp0_regnum +
2 * reg_index, buffer);
}
}
/* Read method for POWER7 VSX pseudo-registers. */
static void
vsx_pseudo_register_read (struct gdbarch *gdbarch, struct regcache *regcache,
int reg_nr, gdb_byte *buffer)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
int reg_index = reg_nr - tdep->ppc_vsr0_regnum;
/* Read the portion that overlaps the VMX registers. */
if (reg_index > 31)
regcache_raw_read (regcache, tdep->ppc_vr0_regnum +
reg_index - 32, buffer);
else
/* Read the portion that overlaps the FPR registers. */
if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG)
{
regcache_raw_read (regcache, tdep->ppc_fp0_regnum +
reg_index, buffer);
regcache_raw_read (regcache, tdep->ppc_vsr0_upper_regnum +
reg_index, buffer + 8);
}
else
{
regcache_raw_read (regcache, tdep->ppc_fp0_regnum +
reg_index, buffer + 8);
regcache_raw_read (regcache, tdep->ppc_vsr0_upper_regnum +
reg_index, buffer);
}
}
/* Write method for POWER7 VSX pseudo-registers. */
static void
vsx_pseudo_register_write (struct gdbarch *gdbarch, struct regcache *regcache,
int reg_nr, const gdb_byte *buffer)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
int reg_index = reg_nr - tdep->ppc_vsr0_regnum;
/* Write the portion that overlaps the VMX registers. */
if (reg_index > 31)
regcache_raw_write (regcache, tdep->ppc_vr0_regnum +
reg_index - 32, buffer);
else
/* Write the portion that overlaps the FPR registers. */
if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG)
{
regcache_raw_write (regcache, tdep->ppc_fp0_regnum +
reg_index, buffer);
regcache_raw_write (regcache, tdep->ppc_vsr0_upper_regnum +
reg_index, buffer + 8);
}
else
{
regcache_raw_write (regcache, tdep->ppc_fp0_regnum +
reg_index, buffer + 8);
regcache_raw_write (regcache, tdep->ppc_vsr0_upper_regnum +
reg_index, buffer);
}
}
/* Read method for POWER7 Extended FP pseudo-registers. */
static void
efpr_pseudo_register_read (struct gdbarch *gdbarch, struct regcache *regcache,
int reg_nr, gdb_byte *buffer)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
int reg_index = reg_nr - tdep->ppc_efpr0_regnum;
/* Read the portion that overlaps the VMX registers. */
regcache_raw_read (regcache, tdep->ppc_vr0_regnum +
reg_index, buffer);
}
/* Write method for POWER7 Extended FP pseudo-registers. */
static void
efpr_pseudo_register_write (struct gdbarch *gdbarch, struct regcache *regcache,
int reg_nr, const gdb_byte *buffer)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
int reg_index = reg_nr - tdep->ppc_efpr0_regnum;
/* Write the portion that overlaps the VMX registers. */
regcache_raw_write (regcache, tdep->ppc_vr0_regnum +
reg_index, buffer);
}
static void
rs6000_pseudo_register_read (struct gdbarch *gdbarch, struct regcache *regcache,
int reg_nr, gdb_byte *buffer)
{
struct gdbarch *regcache_arch = get_regcache_arch (regcache);
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
gdb_assert (regcache_arch == gdbarch);
if (IS_SPE_PSEUDOREG (tdep, reg_nr))
e500_pseudo_register_read (gdbarch, regcache, reg_nr, buffer);
else if (IS_DFP_PSEUDOREG (tdep, reg_nr))
dfp_pseudo_register_read (gdbarch, regcache, reg_nr, buffer);
else if (IS_VSX_PSEUDOREG (tdep, reg_nr))
vsx_pseudo_register_read (gdbarch, regcache, reg_nr, buffer);
else if (IS_EFP_PSEUDOREG (tdep, reg_nr))
efpr_pseudo_register_read (gdbarch, regcache, reg_nr, buffer);
else
internal_error (__FILE__, __LINE__,
_("rs6000_pseudo_register_read: "
"called on unexpected register '%s' (%d)"),
gdbarch_register_name (gdbarch, reg_nr), reg_nr);
}
static void
rs6000_pseudo_register_write (struct gdbarch *gdbarch,
struct regcache *regcache,
int reg_nr, const gdb_byte *buffer)
{
struct gdbarch *regcache_arch = get_regcache_arch (regcache);
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
gdb_assert (regcache_arch == gdbarch);
if (IS_SPE_PSEUDOREG (tdep, reg_nr))
e500_pseudo_register_write (gdbarch, regcache, reg_nr, buffer);
else if (IS_DFP_PSEUDOREG (tdep, reg_nr))
dfp_pseudo_register_write (gdbarch, regcache, reg_nr, buffer);
else if (IS_VSX_PSEUDOREG (tdep, reg_nr))
vsx_pseudo_register_write (gdbarch, regcache, reg_nr, buffer);
else if (IS_EFP_PSEUDOREG (tdep, reg_nr))
efpr_pseudo_register_write (gdbarch, regcache, reg_nr, buffer);
else
internal_error (__FILE__, __LINE__,
_("rs6000_pseudo_register_write: "
"called on unexpected register '%s' (%d)"),
gdbarch_register_name (gdbarch, reg_nr), reg_nr);
}
/* Convert a DBX STABS register number to a GDB register number. */
static int
rs6000_stab_reg_to_regnum (struct gdbarch *gdbarch, int num)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
if (0 <= num && num <= 31)
return tdep->ppc_gp0_regnum + num;
else if (32 <= num && num <= 63)
/* FIXME: jimb/2004-05-05: What should we do when the debug info
specifies registers the architecture doesn't have? Our
callers don't check the value we return. */
return tdep->ppc_fp0_regnum + (num - 32);
else if (77 <= num && num <= 108)
return tdep->ppc_vr0_regnum + (num - 77);
else if (1200 <= num && num < 1200 + 32)
return tdep->ppc_ev0_regnum + (num - 1200);
else
switch (num)
{
case 64:
return tdep->ppc_mq_regnum;
case 65:
return tdep->ppc_lr_regnum;
case 66:
return tdep->ppc_ctr_regnum;
case 76:
return tdep->ppc_xer_regnum;
case 109:
return tdep->ppc_vrsave_regnum;
case 110:
return tdep->ppc_vrsave_regnum - 1; /* vscr */
case 111:
return tdep->ppc_acc_regnum;
case 112:
return tdep->ppc_spefscr_regnum;
default:
return num;
}
}
/* Convert a Dwarf 2 register number to a GDB register number. */
static int
rs6000_dwarf2_reg_to_regnum (struct gdbarch *gdbarch, int num)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
if (0 <= num && num <= 31)
return tdep->ppc_gp0_regnum + num;
else if (32 <= num && num <= 63)
/* FIXME: jimb/2004-05-05: What should we do when the debug info
specifies registers the architecture doesn't have? Our
callers don't check the value we return. */
return tdep->ppc_fp0_regnum + (num - 32);
else if (1124 <= num && num < 1124 + 32)
return tdep->ppc_vr0_regnum + (num - 1124);
else if (1200 <= num && num < 1200 + 32)
return tdep->ppc_ev0_regnum + (num - 1200);
else
switch (num)
{
case 64:
return tdep->ppc_cr_regnum;
case 67:
return tdep->ppc_vrsave_regnum - 1; /* vscr */
case 99:
return tdep->ppc_acc_regnum;
case 100:
return tdep->ppc_mq_regnum;
case 101:
return tdep->ppc_xer_regnum;
case 108:
return tdep->ppc_lr_regnum;
case 109:
return tdep->ppc_ctr_regnum;
case 356:
return tdep->ppc_vrsave_regnum;
case 612:
return tdep->ppc_spefscr_regnum;
default:
return num;
}
}
/* Translate a .eh_frame register to DWARF register, or adjust a
.debug_frame register. */
static int
rs6000_adjust_frame_regnum (struct gdbarch *gdbarch, int num, int eh_frame_p)
{
/* GCC releases before 3.4 use GCC internal register numbering in
.debug_frame (and .debug_info, et cetera). The numbering is
different from the standard SysV numbering for everything except
for GPRs and FPRs. We can not detect this problem in most cases
- to get accurate debug info for variables living in lr, ctr, v0,
et cetera, use a newer version of GCC. But we must detect
one important case - lr is in column 65 in .debug_frame output,
instead of 108.
GCC 3.4, and the "hammer" branch, have a related problem. They
record lr register saves in .debug_frame as 108, but still record
the return column as 65. We fix that up too.
We can do this because 65 is assigned to fpsr, and GCC never
generates debug info referring to it. To add support for
handwritten debug info that restores fpsr, we would need to add a
producer version check to this. */
if (!eh_frame_p)
{
if (num == 65)
return 108;
else
return num;
}
/* .eh_frame is GCC specific. For binary compatibility, it uses GCC
internal register numbering; translate that to the standard DWARF2
register numbering. */
if (0 <= num && num <= 63) /* r0-r31,fp0-fp31 */
return num;
else if (68 <= num && num <= 75) /* cr0-cr8 */
return num - 68 + 86;
else if (77 <= num && num <= 108) /* vr0-vr31 */
return num - 77 + 1124;
else
switch (num)
{
case 64: /* mq */
return 100;
case 65: /* lr */
return 108;
case 66: /* ctr */
return 109;
case 76: /* xer */
return 101;
case 109: /* vrsave */
return 356;
case 110: /* vscr */
return 67;
case 111: /* spe_acc */
return 99;
case 112: /* spefscr */
return 612;
default:
return num;
}
}
/* Handling the various POWER/PowerPC variants. */
/* Information about a particular processor variant. */
struct variant
{
/* Name of this variant. */
char *name;
/* English description of the variant. */
char *description;
/* bfd_arch_info.arch corresponding to variant. */
enum bfd_architecture arch;
/* bfd_arch_info.mach corresponding to variant. */
unsigned long mach;
/* Target description for this variant. */
struct target_desc **tdesc;
};
static struct variant variants[] =
{
{"powerpc", "PowerPC user-level", bfd_arch_powerpc,
bfd_mach_ppc, &tdesc_powerpc_altivec32},
{"power", "POWER user-level", bfd_arch_rs6000,
bfd_mach_rs6k, &tdesc_rs6000},
{"403", "IBM PowerPC 403", bfd_arch_powerpc,
bfd_mach_ppc_403, &tdesc_powerpc_403},
{"601", "Motorola PowerPC 601", bfd_arch_powerpc,
bfd_mach_ppc_601, &tdesc_powerpc_601},
{"602", "Motorola PowerPC 602", bfd_arch_powerpc,
bfd_mach_ppc_602, &tdesc_powerpc_602},
{"603", "Motorola/IBM PowerPC 603 or 603e", bfd_arch_powerpc,
bfd_mach_ppc_603, &tdesc_powerpc_603},
{"604", "Motorola PowerPC 604 or 604e", bfd_arch_powerpc,
604, &tdesc_powerpc_604},
{"403GC", "IBM PowerPC 403GC", bfd_arch_powerpc,
bfd_mach_ppc_403gc, &tdesc_powerpc_403gc},
{"505", "Motorola PowerPC 505", bfd_arch_powerpc,
bfd_mach_ppc_505, &tdesc_powerpc_505},
{"860", "Motorola PowerPC 860 or 850", bfd_arch_powerpc,
bfd_mach_ppc_860, &tdesc_powerpc_860},
{"750", "Motorola/IBM PowerPC 750 or 740", bfd_arch_powerpc,
bfd_mach_ppc_750, &tdesc_powerpc_750},
{"7400", "Motorola/IBM PowerPC 7400 (G4)", bfd_arch_powerpc,
bfd_mach_ppc_7400, &tdesc_powerpc_7400},
{"e500", "Motorola PowerPC e500", bfd_arch_powerpc,
bfd_mach_ppc_e500, &tdesc_powerpc_e500},
/* 64-bit */
{"powerpc64", "PowerPC 64-bit user-level", bfd_arch_powerpc,
bfd_mach_ppc64, &tdesc_powerpc_altivec64},
{"620", "Motorola PowerPC 620", bfd_arch_powerpc,
bfd_mach_ppc_620, &tdesc_powerpc_64},
{"630", "Motorola PowerPC 630", bfd_arch_powerpc,
bfd_mach_ppc_630, &tdesc_powerpc_64},
{"a35", "PowerPC A35", bfd_arch_powerpc,
bfd_mach_ppc_a35, &tdesc_powerpc_64},
{"rs64ii", "PowerPC rs64ii", bfd_arch_powerpc,
bfd_mach_ppc_rs64ii, &tdesc_powerpc_64},
{"rs64iii", "PowerPC rs64iii", bfd_arch_powerpc,
bfd_mach_ppc_rs64iii, &tdesc_powerpc_64},
/* FIXME: I haven't checked the register sets of the following. */
{"rs1", "IBM POWER RS1", bfd_arch_rs6000,
bfd_mach_rs6k_rs1, &tdesc_rs6000},
{"rsc", "IBM POWER RSC", bfd_arch_rs6000,
bfd_mach_rs6k_rsc, &tdesc_rs6000},
{"rs2", "IBM POWER RS2", bfd_arch_rs6000,
bfd_mach_rs6k_rs2, &tdesc_rs6000},
{0, 0, 0, 0, 0}
};
/* Return the variant corresponding to architecture ARCH and machine number
MACH. If no such variant exists, return null. */
static const struct variant *
find_variant_by_arch (enum bfd_architecture arch, unsigned long mach)
{
const struct variant *v;
for (v = variants; v->name; v++)
if (arch == v->arch && mach == v->mach)
return v;
return NULL;
}
static int
gdb_print_insn_powerpc (bfd_vma memaddr, disassemble_info *info)
{
if (!info->disassembler_options)
info->disassembler_options = "any";
if (info->endian == BFD_ENDIAN_BIG)
return print_insn_big_powerpc (memaddr, info);
else
return print_insn_little_powerpc (memaddr, info);
}
static CORE_ADDR
rs6000_unwind_pc (struct gdbarch *gdbarch, struct frame_info *next_frame)
{
return frame_unwind_register_unsigned (next_frame,
gdbarch_pc_regnum (gdbarch));
}
static struct frame_id
rs6000_dummy_id (struct gdbarch *gdbarch, struct frame_info *this_frame)
{
return frame_id_build (get_frame_register_unsigned
(this_frame, gdbarch_sp_regnum (gdbarch)),
get_frame_pc (this_frame));
}
struct rs6000_frame_cache
{
CORE_ADDR base;
CORE_ADDR initial_sp;
struct trad_frame_saved_reg *saved_regs;
};
static struct rs6000_frame_cache *
rs6000_frame_cache (struct frame_info *this_frame, void **this_cache)
{
struct rs6000_frame_cache *cache;
struct gdbarch *gdbarch = get_frame_arch (this_frame);
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
struct rs6000_framedata fdata;
int wordsize = tdep->wordsize;
CORE_ADDR func, pc;
if ((*this_cache) != NULL)
return (*this_cache);
cache = FRAME_OBSTACK_ZALLOC (struct rs6000_frame_cache);
(*this_cache) = cache;
cache->saved_regs = trad_frame_alloc_saved_regs (this_frame);
func = get_frame_func (this_frame);
pc = get_frame_pc (this_frame);
skip_prologue (gdbarch, func, pc, &fdata);
/* Figure out the parent's stack pointer. */
/* NOTE: cagney/2002-04-14: The ->frame points to the inner-most
address of the current frame. Things might be easier if the
->frame pointed to the outer-most address of the frame. In
the mean time, the address of the prev frame is used as the
base address of this frame. */
cache->base = get_frame_register_unsigned
(this_frame, gdbarch_sp_regnum (gdbarch));
/* If the function appears to be frameless, check a couple of likely
indicators that we have simply failed to find the frame setup.
Two common cases of this are missing symbols (i.e.
get_frame_func returns the wrong address or 0), and assembly
stubs which have a fast exit path but set up a frame on the slow
path.
If the LR appears to return to this function, then presume that
we have an ABI compliant frame that we failed to find. */
if (fdata.frameless && fdata.lr_offset == 0)
{
CORE_ADDR saved_lr;
int make_frame = 0;
saved_lr = get_frame_register_unsigned (this_frame, tdep->ppc_lr_regnum);
if (func == 0 && saved_lr == pc)
make_frame = 1;
else if (func != 0)
{
CORE_ADDR saved_func = get_pc_function_start (saved_lr);
if (func == saved_func)
make_frame = 1;
}
if (make_frame)
{
fdata.frameless = 0;
fdata.lr_offset = tdep->lr_frame_offset;
}
}
if (!fdata.frameless)
/* Frameless really means stackless. */
cache->base = read_memory_unsigned_integer (cache->base, wordsize);
trad_frame_set_value (cache->saved_regs,
gdbarch_sp_regnum (gdbarch), cache->base);
/* if != -1, fdata.saved_fpr is the smallest number of saved_fpr.
All fpr's from saved_fpr to fp31 are saved. */
if (fdata.saved_fpr >= 0)
{
int i;
CORE_ADDR fpr_addr = cache->base + fdata.fpr_offset;
/* If skip_prologue says floating-point registers were saved,
but the current architecture has no floating-point registers,
then that's strange. But we have no indices to even record
the addresses under, so we just ignore it. */
if (ppc_floating_point_unit_p (gdbarch))
for (i = fdata.saved_fpr; i < ppc_num_fprs; i++)
{
cache->saved_regs[tdep->ppc_fp0_regnum + i].addr = fpr_addr;
fpr_addr += 8;
}
}
/* if != -1, fdata.saved_gpr is the smallest number of saved_gpr.
All gpr's from saved_gpr to gpr31 are saved (except during the
prologue). */
if (fdata.saved_gpr >= 0)
{
int i;
CORE_ADDR gpr_addr = cache->base + fdata.gpr_offset;
for (i = fdata.saved_gpr; i < ppc_num_gprs; i++)
{
if (fdata.gpr_mask & (1U << i))
cache->saved_regs[tdep->ppc_gp0_regnum + i].addr = gpr_addr;
gpr_addr += wordsize;
}
}
/* if != -1, fdata.saved_vr is the smallest number of saved_vr.
All vr's from saved_vr to vr31 are saved. */
if (tdep->ppc_vr0_regnum != -1 && tdep->ppc_vrsave_regnum != -1)
{
if (fdata.saved_vr >= 0)
{
int i;
CORE_ADDR vr_addr = cache->base + fdata.vr_offset;
for (i = fdata.saved_vr; i < 32; i++)
{
cache->saved_regs[tdep->ppc_vr0_regnum + i].addr = vr_addr;
vr_addr += register_size (gdbarch, tdep->ppc_vr0_regnum);
}
}
}
/* if != -1, fdata.saved_ev is the smallest number of saved_ev.
All vr's from saved_ev to ev31 are saved. ????? */
if (tdep->ppc_ev0_regnum != -1)
{
if (fdata.saved_ev >= 0)
{
int i;
CORE_ADDR ev_addr = cache->base + fdata.ev_offset;
for (i = fdata.saved_ev; i < ppc_num_gprs; i++)
{
cache->saved_regs[tdep->ppc_ev0_regnum + i].addr = ev_addr;
cache->saved_regs[tdep->ppc_gp0_regnum + i].addr = ev_addr + 4;
ev_addr += register_size (gdbarch, tdep->ppc_ev0_regnum);
}
}
}
/* If != 0, fdata.cr_offset is the offset from the frame that
holds the CR. */
if (fdata.cr_offset != 0)
cache->saved_regs[tdep->ppc_cr_regnum].addr = cache->base + fdata.cr_offset;
/* If != 0, fdata.lr_offset is the offset from the frame that
holds the LR. */
if (fdata.lr_offset != 0)
cache->saved_regs[tdep->ppc_lr_regnum].addr = cache->base + fdata.lr_offset;
else if (fdata.lr_register != -1)
cache->saved_regs[tdep->ppc_lr_regnum].realreg = fdata.lr_register;
/* The PC is found in the link register. */
cache->saved_regs[gdbarch_pc_regnum (gdbarch)] =
cache->saved_regs[tdep->ppc_lr_regnum];
/* If != 0, fdata.vrsave_offset is the offset from the frame that
holds the VRSAVE. */
if (fdata.vrsave_offset != 0)
cache->saved_regs[tdep->ppc_vrsave_regnum].addr = cache->base + fdata.vrsave_offset;
if (fdata.alloca_reg < 0)
/* If no alloca register used, then fi->frame is the value of the
%sp for this frame, and it is good enough. */
cache->initial_sp
= get_frame_register_unsigned (this_frame, gdbarch_sp_regnum (gdbarch));
else
cache->initial_sp
= get_frame_register_unsigned (this_frame, fdata.alloca_reg);
return cache;
}
static void
rs6000_frame_this_id (struct frame_info *this_frame, void **this_cache,
struct frame_id *this_id)
{
struct rs6000_frame_cache *info = rs6000_frame_cache (this_frame,
this_cache);
/* This marks the outermost frame. */
if (info->base == 0)
return;
(*this_id) = frame_id_build (info->base, get_frame_func (this_frame));
}
static struct value *
rs6000_frame_prev_register (struct frame_info *this_frame,
void **this_cache, int regnum)
{
struct rs6000_frame_cache *info = rs6000_frame_cache (this_frame,
this_cache);
return trad_frame_get_prev_register (this_frame, info->saved_regs, regnum);
}
static const struct frame_unwind rs6000_frame_unwind =
{
NORMAL_FRAME,
rs6000_frame_this_id,
rs6000_frame_prev_register,
NULL,
default_frame_sniffer
};
static CORE_ADDR
rs6000_frame_base_address (struct frame_info *this_frame, void **this_cache)
{
struct rs6000_frame_cache *info = rs6000_frame_cache (this_frame,
this_cache);
return info->initial_sp;
}
static const struct frame_base rs6000_frame_base = {
&rs6000_frame_unwind,
rs6000_frame_base_address,
rs6000_frame_base_address,
rs6000_frame_base_address
};
static const struct frame_base *
rs6000_frame_base_sniffer (struct frame_info *this_frame)
{
return &rs6000_frame_base;
}
/* DWARF-2 frame support. Used to handle the detection of
clobbered registers during function calls. */
static void
ppc_dwarf2_frame_init_reg (struct gdbarch *gdbarch, int regnum,
struct dwarf2_frame_state_reg *reg,
struct frame_info *this_frame)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
/* PPC32 and PPC64 ABI's are the same regarding volatile and
non-volatile registers. We will use the same code for both. */
/* Call-saved GP registers. */
if ((regnum >= tdep->ppc_gp0_regnum + 14
&& regnum <= tdep->ppc_gp0_regnum + 31)
|| (regnum == tdep->ppc_gp0_regnum + 1))
reg->how = DWARF2_FRAME_REG_SAME_VALUE;
/* Call-clobbered GP registers. */
if ((regnum >= tdep->ppc_gp0_regnum + 3
&& regnum <= tdep->ppc_gp0_regnum + 12)
|| (regnum == tdep->ppc_gp0_regnum))
reg->how = DWARF2_FRAME_REG_UNDEFINED;
/* Deal with FP registers, if supported. */
if (tdep->ppc_fp0_regnum >= 0)
{
/* Call-saved FP registers. */
if ((regnum >= tdep->ppc_fp0_regnum + 14
&& regnum <= tdep->ppc_fp0_regnum + 31))
reg->how = DWARF2_FRAME_REG_SAME_VALUE;
/* Call-clobbered FP registers. */
if ((regnum >= tdep->ppc_fp0_regnum
&& regnum <= tdep->ppc_fp0_regnum + 13))
reg->how = DWARF2_FRAME_REG_UNDEFINED;
}
/* Deal with ALTIVEC registers, if supported. */
if (tdep->ppc_vr0_regnum > 0 && tdep->ppc_vrsave_regnum > 0)
{
/* Call-saved Altivec registers. */
if ((regnum >= tdep->ppc_vr0_regnum + 20
&& regnum <= tdep->ppc_vr0_regnum + 31)
|| regnum == tdep->ppc_vrsave_regnum)
reg->how = DWARF2_FRAME_REG_SAME_VALUE;
/* Call-clobbered Altivec registers. */
if ((regnum >= tdep->ppc_vr0_regnum
&& regnum <= tdep->ppc_vr0_regnum + 19))
reg->how = DWARF2_FRAME_REG_UNDEFINED;
}
/* Handle PC register and Stack Pointer correctly. */
if (regnum == gdbarch_pc_regnum (gdbarch))
reg->how = DWARF2_FRAME_REG_RA;
else if (regnum == gdbarch_sp_regnum (gdbarch))
reg->how = DWARF2_FRAME_REG_CFA;
}
/* Initialize the current architecture based on INFO. If possible, re-use an
architecture from ARCHES, which is a list of architectures already created
during this debugging session.
Called e.g. at program startup, when reading a core file, and when reading
a binary file. */
static struct gdbarch *
rs6000_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches)
{
struct gdbarch *gdbarch;
struct gdbarch_tdep *tdep;
int wordsize, from_xcoff_exec, from_elf_exec;
enum bfd_architecture arch;
unsigned long mach;
bfd abfd;
asection *sect;
enum auto_boolean soft_float_flag = powerpc_soft_float_global;
int soft_float;
enum powerpc_vector_abi vector_abi = powerpc_vector_abi_global;
int have_fpu = 1, have_spe = 0, have_mq = 0, have_altivec = 0, have_dfp = 0,
have_vsx = 0;
int tdesc_wordsize = -1;
const struct target_desc *tdesc = info.target_desc;
struct tdesc_arch_data *tdesc_data = NULL;
int num_pseudoregs = 0;
int cur_reg;
from_xcoff_exec = info.abfd && info.abfd->format == bfd_object &&
bfd_get_flavour (info.abfd) == bfd_target_xcoff_flavour;
from_elf_exec = info.abfd && info.abfd->format == bfd_object &&
bfd_get_flavour (info.abfd) == bfd_target_elf_flavour;
/* Check word size. If INFO is from a binary file, infer it from
that, else choose a likely default. */
if (from_xcoff_exec)
{
if (bfd_xcoff_is_xcoff64 (info.abfd))
wordsize = 8;
else
wordsize = 4;
}
else if (from_elf_exec)
{
if (elf_elfheader (info.abfd)->e_ident[EI_CLASS] == ELFCLASS64)
wordsize = 8;
else
wordsize = 4;
}
else if (tdesc_has_registers (tdesc))
wordsize = -1;
else
{
if (info.bfd_arch_info != NULL && info.bfd_arch_info->bits_per_word != 0)
wordsize = info.bfd_arch_info->bits_per_word /
info.bfd_arch_info->bits_per_byte;
else
wordsize = 4;
}
/* Get the architecture and machine from the BFD. */
arch = info.bfd_arch_info->arch;
mach = info.bfd_arch_info->mach;
/* For e500 executables, the apuinfo section is of help here. Such
section contains the identifier and revision number of each
Application-specific Processing Unit that is present on the
chip. The content of the section is determined by the assembler
which looks at each instruction and determines which unit (and
which version of it) can execute it. In our case we just look for
the existance of the section. */
if (info.abfd)
{
sect = bfd_get_section_by_name (info.abfd, ".PPC.EMB.apuinfo");
if (sect)
{
arch = info.bfd_arch_info->arch;
mach = bfd_mach_ppc_e500;
bfd_default_set_arch_mach (&abfd, arch, mach);
info.bfd_arch_info = bfd_get_arch_info (&abfd);
}
}
/* Find a default target description which describes our register
layout, if we do not already have one. */
if (! tdesc_has_registers (tdesc))
{
const struct variant *v;
/* Choose variant. */
v = find_variant_by_arch (arch, mach);
if (!v)
return NULL;
tdesc = *v->tdesc;
}
gdb_assert (tdesc_has_registers (tdesc));
/* Check any target description for validity. */
if (tdesc_has_registers (tdesc))
{
static const char *const gprs[] = {
"r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
"r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",
"r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23",
"r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31"
};
static const char *const segment_regs[] = {
"sr0", "sr1", "sr2", "sr3", "sr4", "sr5", "sr6", "sr7",
"sr8", "sr9", "sr10", "sr11", "sr12", "sr13", "sr14", "sr15"
};
const struct tdesc_feature *feature;
int i, valid_p;
static const char *const msr_names[] = { "msr", "ps" };
static const char *const cr_names[] = { "cr", "cnd" };
static const char *const ctr_names[] = { "ctr", "cnt" };
feature = tdesc_find_feature (tdesc,
"org.gnu.gdb.power.core");
if (feature == NULL)
return NULL;
tdesc_data = tdesc_data_alloc ();
valid_p = 1;
for (i = 0; i < ppc_num_gprs; i++)
valid_p &= tdesc_numbered_register (feature, tdesc_data, i, gprs[i]);
valid_p &= tdesc_numbered_register (feature, tdesc_data, PPC_PC_REGNUM,
"pc");
valid_p &= tdesc_numbered_register (feature, tdesc_data, PPC_LR_REGNUM,
"lr");
valid_p &= tdesc_numbered_register (feature, tdesc_data, PPC_XER_REGNUM,
"xer");
/* Allow alternate names for these registers, to accomodate GDB's
historic naming. */
valid_p &= tdesc_numbered_register_choices (feature, tdesc_data,
PPC_MSR_REGNUM, msr_names);
valid_p &= tdesc_numbered_register_choices (feature, tdesc_data,
PPC_CR_REGNUM, cr_names);
valid_p &= tdesc_numbered_register_choices (feature, tdesc_data,
PPC_CTR_REGNUM, ctr_names);
if (!valid_p)
{
tdesc_data_cleanup (tdesc_data);
return NULL;
}
have_mq = tdesc_numbered_register (feature, tdesc_data, PPC_MQ_REGNUM,
"mq");
tdesc_wordsize = tdesc_register_size (feature, "pc") / 8;
if (wordsize == -1)
wordsize = tdesc_wordsize;
feature = tdesc_find_feature (tdesc,
"org.gnu.gdb.power.fpu");
if (feature != NULL)
{
static const char *const fprs[] = {
"f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7",
"f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15",
"f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23",
"f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31"
};
valid_p = 1;
for (i = 0; i < ppc_num_fprs; i++)
valid_p &= tdesc_numbered_register (feature, tdesc_data,
PPC_F0_REGNUM + i, fprs[i]);
valid_p &= tdesc_numbered_register (feature, tdesc_data,
PPC_FPSCR_REGNUM, "fpscr");
if (!valid_p)
{
tdesc_data_cleanup (tdesc_data);
return NULL;
}
have_fpu = 1;
}
else
have_fpu = 0;
/* The DFP pseudo-registers will be available when there are floating
point registers. */
have_dfp = have_fpu;
feature = tdesc_find_feature (tdesc,
"org.gnu.gdb.power.altivec");
if (feature != NULL)
{
static const char *const vector_regs[] = {
"vr0", "vr1", "vr2", "vr3", "vr4", "vr5", "vr6", "vr7",
"vr8", "vr9", "vr10", "vr11", "vr12", "vr13", "vr14", "vr15",
"vr16", "vr17", "vr18", "vr19", "vr20", "vr21", "vr22", "vr23",
"vr24", "vr25", "vr26", "vr27", "vr28", "vr29", "vr30", "vr31"
};
valid_p = 1;
for (i = 0; i < ppc_num_gprs; i++)
valid_p &= tdesc_numbered_register (feature, tdesc_data,
PPC_VR0_REGNUM + i,
vector_regs[i]);
valid_p &= tdesc_numbered_register (feature, tdesc_data,
PPC_VSCR_REGNUM, "vscr");
valid_p &= tdesc_numbered_register (feature, tdesc_data,
PPC_VRSAVE_REGNUM, "vrsave");
if (have_spe || !valid_p)
{
tdesc_data_cleanup (tdesc_data);
return NULL;
}
have_altivec = 1;
}
else
have_altivec = 0;
/* Check for POWER7 VSX registers support. */
feature = tdesc_find_feature (tdesc,
"org.gnu.gdb.power.vsx");
if (feature != NULL)
{
static const char *const vsx_regs[] = {
"vs0h", "vs1h", "vs2h", "vs3h", "vs4h", "vs5h",
"vs6h", "vs7h", "vs8h", "vs9h", "vs10h", "vs11h",
"vs12h", "vs13h", "vs14h", "vs15h", "vs16h", "vs17h",
"vs18h", "vs19h", "vs20h", "vs21h", "vs22h", "vs23h",
"vs24h", "vs25h", "vs26h", "vs27h", "vs28h", "vs29h",
"vs30h", "vs31h"
};
valid_p = 1;
for (i = 0; i < ppc_num_vshrs; i++)
valid_p &= tdesc_numbered_register (feature, tdesc_data,
PPC_VSR0_UPPER_REGNUM + i,
vsx_regs[i]);
if (!valid_p)
{
tdesc_data_cleanup (tdesc_data);
return NULL;
}
have_vsx = 1;
}
else
have_vsx = 0;
/* On machines supporting the SPE APU, the general-purpose registers
are 64 bits long. There are SIMD vector instructions to treat them
as pairs of floats, but the rest of the instruction set treats them
as 32-bit registers, and only operates on their lower halves.
In the GDB regcache, we treat their high and low halves as separate
registers. The low halves we present as the general-purpose
registers, and then we have pseudo-registers that stitch together
the upper and lower halves and present them as pseudo-registers.
Thus, the target description is expected to supply the upper
halves separately. */
feature = tdesc_find_feature (tdesc,
"org.gnu.gdb.power.spe");
if (feature != NULL)
{
static const char *const upper_spe[] = {
"ev0h", "ev1h", "ev2h", "ev3h",
"ev4h", "ev5h", "ev6h", "ev7h",
"ev8h", "ev9h", "ev10h", "ev11h",
"ev12h", "ev13h", "ev14h", "ev15h",
"ev16h", "ev17h", "ev18h", "ev19h",
"ev20h", "ev21h", "ev22h", "ev23h",
"ev24h", "ev25h", "ev26h", "ev27h",
"ev28h", "ev29h", "ev30h", "ev31h"
};
valid_p = 1;
for (i = 0; i < ppc_num_gprs; i++)
valid_p &= tdesc_numbered_register (feature, tdesc_data,
PPC_SPE_UPPER_GP0_REGNUM + i,
upper_spe[i]);
valid_p &= tdesc_numbered_register (feature, tdesc_data,
PPC_SPE_ACC_REGNUM, "acc");
valid_p &= tdesc_numbered_register (feature, tdesc_data,
PPC_SPE_FSCR_REGNUM, "spefscr");
if (have_mq || have_fpu || !valid_p)
{
tdesc_data_cleanup (tdesc_data);
return NULL;
}
have_spe = 1;
}
else
have_spe = 0;
}
/* If we have a 64-bit binary on a 32-bit target, complain. Also
complain for a 32-bit binary on a 64-bit target; we do not yet
support that. For instance, the 32-bit ABI routines expect
32-bit GPRs.
As long as there isn't an explicit target description, we'll
choose one based on the BFD architecture and get a word size
matching the binary (probably powerpc:common or
powerpc:common64). So there is only trouble if a 64-bit target
supplies a 64-bit description while debugging a 32-bit
binary. */
if (tdesc_wordsize != -1 && tdesc_wordsize != wordsize)
{
tdesc_data_cleanup (tdesc_data);
return NULL;
}
#ifdef HAVE_ELF
if (soft_float_flag == AUTO_BOOLEAN_AUTO && from_elf_exec)
{
switch (bfd_elf_get_obj_attr_int (info.abfd, OBJ_ATTR_GNU,
Tag_GNU_Power_ABI_FP))
{
case 1:
soft_float_flag = AUTO_BOOLEAN_FALSE;
break;
case 2:
soft_float_flag = AUTO_BOOLEAN_TRUE;
break;
default:
break;
}
}
if (vector_abi == POWERPC_VEC_AUTO && from_elf_exec)
{
switch (bfd_elf_get_obj_attr_int (info.abfd, OBJ_ATTR_GNU,
Tag_GNU_Power_ABI_Vector))
{
case 1:
vector_abi = POWERPC_VEC_GENERIC;
break;
case 2:
vector_abi = POWERPC_VEC_ALTIVEC;
break;
case 3:
vector_abi = POWERPC_VEC_SPE;
break;
default:
break;
}
}
#endif
if (soft_float_flag == AUTO_BOOLEAN_TRUE)
soft_float = 1;
else if (soft_float_flag == AUTO_BOOLEAN_FALSE)
soft_float = 0;
else
soft_float = !have_fpu;
/* If we have a hard float binary or setting but no floating point
registers, downgrade to soft float anyway. We're still somewhat
useful in this scenario. */
if (!soft_float && !have_fpu)
soft_float = 1;
/* Similarly for vector registers. */
if (vector_abi == POWERPC_VEC_ALTIVEC && !have_altivec)
vector_abi = POWERPC_VEC_GENERIC;
if (vector_abi == POWERPC_VEC_SPE && !have_spe)
vector_abi = POWERPC_VEC_GENERIC;
if (vector_abi == POWERPC_VEC_AUTO)
{
if (have_altivec)
vector_abi = POWERPC_VEC_ALTIVEC;
else if (have_spe)
vector_abi = POWERPC_VEC_SPE;
else
vector_abi = POWERPC_VEC_GENERIC;
}
/* Do not limit the vector ABI based on available hardware, since we
do not yet know what hardware we'll decide we have. Yuck! FIXME! */
/* Find a candidate among extant architectures. */
for (arches = gdbarch_list_lookup_by_info (arches, &info);
arches != NULL;
arches = gdbarch_list_lookup_by_info (arches->next, &info))
{
/* Word size in the various PowerPC bfd_arch_info structs isn't
meaningful, because 64-bit CPUs can run in 32-bit mode. So, perform
separate word size check. */
tdep = gdbarch_tdep (arches->gdbarch);
if (tdep && tdep->soft_float != soft_float)
continue;
if (tdep && tdep->vector_abi != vector_abi)
continue;
if (tdep && tdep->wordsize == wordsize)
{
if (tdesc_data != NULL)
tdesc_data_cleanup (tdesc_data);
return arches->gdbarch;
}
}
/* None found, create a new architecture from INFO, whose bfd_arch_info
validity depends on the source:
- executable useless
- rs6000_host_arch() good
- core file good
- "set arch" trust blindly
- GDB startup useless but harmless */
tdep = XCALLOC (1, struct gdbarch_tdep);
tdep->wordsize = wordsize;
tdep->soft_float = soft_float;
tdep->vector_abi = vector_abi;
gdbarch = gdbarch_alloc (&info, tdep);
tdep->ppc_gp0_regnum = PPC_R0_REGNUM;
tdep->ppc_toc_regnum = PPC_R0_REGNUM + 2;
tdep->ppc_ps_regnum = PPC_MSR_REGNUM;
tdep->ppc_cr_regnum = PPC_CR_REGNUM;
tdep->ppc_lr_regnum = PPC_LR_REGNUM;
tdep->ppc_ctr_regnum = PPC_CTR_REGNUM;
tdep->ppc_xer_regnum = PPC_XER_REGNUM;
tdep->ppc_mq_regnum = have_mq ? PPC_MQ_REGNUM : -1;
tdep->ppc_fp0_regnum = have_fpu ? PPC_F0_REGNUM : -1;
tdep->ppc_fpscr_regnum = have_fpu ? PPC_FPSCR_REGNUM : -1;
tdep->ppc_vsr0_upper_regnum = have_vsx ? PPC_VSR0_UPPER_REGNUM : -1;
tdep->ppc_vr0_regnum = have_altivec ? PPC_VR0_REGNUM : -1;
tdep->ppc_vrsave_regnum = have_altivec ? PPC_VRSAVE_REGNUM : -1;
tdep->ppc_ev0_upper_regnum = have_spe ? PPC_SPE_UPPER_GP0_REGNUM : -1;
tdep->ppc_acc_regnum = have_spe ? PPC_SPE_ACC_REGNUM : -1;
tdep->ppc_spefscr_regnum = have_spe ? PPC_SPE_FSCR_REGNUM : -1;
set_gdbarch_pc_regnum (gdbarch, PPC_PC_REGNUM);
set_gdbarch_sp_regnum (gdbarch, PPC_R0_REGNUM + 1);
set_gdbarch_deprecated_fp_regnum (gdbarch, PPC_R0_REGNUM + 1);
set_gdbarch_fp0_regnum (gdbarch, tdep->ppc_fp0_regnum);
set_gdbarch_register_sim_regno (gdbarch, rs6000_register_sim_regno);
/* The XML specification for PowerPC sensibly calls the MSR "msr".
GDB traditionally called it "ps", though, so let GDB add an
alias. */
set_gdbarch_ps_regnum (gdbarch, tdep->ppc_ps_regnum);
if (wordsize == 8)
set_gdbarch_return_value (gdbarch, ppc64_sysv_abi_return_value);
else
set_gdbarch_return_value (gdbarch, ppc_sysv_abi_return_value);
/* Set lr_frame_offset. */
if (wordsize == 8)
tdep->lr_frame_offset = 16;
else
tdep->lr_frame_offset = 4;
if (have_spe || have_dfp || have_vsx)
{
set_gdbarch_pseudo_register_read (gdbarch, rs6000_pseudo_register_read);
set_gdbarch_pseudo_register_write (gdbarch, rs6000_pseudo_register_write);
}
set_gdbarch_have_nonsteppable_watchpoint (gdbarch, 1);
/* Select instruction printer. */
if (arch == bfd_arch_rs6000)
set_gdbarch_print_insn (gdbarch, print_insn_rs6000);
else
set_gdbarch_print_insn (gdbarch, gdb_print_insn_powerpc);
set_gdbarch_num_regs (gdbarch, PPC_NUM_REGS);
if (have_spe)
num_pseudoregs += 32;
if (have_dfp)
num_pseudoregs += 16;
if (have_vsx)
/* Include both VSX and Extended FP registers. */
num_pseudoregs += 96;
set_gdbarch_num_pseudo_regs (gdbarch, num_pseudoregs);
set_gdbarch_ptr_bit (gdbarch, wordsize * TARGET_CHAR_BIT);
set_gdbarch_short_bit (gdbarch, 2 * TARGET_CHAR_BIT);
set_gdbarch_int_bit (gdbarch, 4 * TARGET_CHAR_BIT);
set_gdbarch_long_bit (gdbarch, wordsize * TARGET_CHAR_BIT);
set_gdbarch_long_long_bit (gdbarch, 8 * TARGET_CHAR_BIT);
set_gdbarch_float_bit (gdbarch, 4 * TARGET_CHAR_BIT);
set_gdbarch_double_bit (gdbarch, 8 * TARGET_CHAR_BIT);
set_gdbarch_long_double_bit (gdbarch, 16 * TARGET_CHAR_BIT);
set_gdbarch_char_signed (gdbarch, 0);
set_gdbarch_frame_align (gdbarch, rs6000_frame_align);
if (wordsize == 8)
/* PPC64 SYSV. */
set_gdbarch_frame_red_zone_size (gdbarch, 288);
set_gdbarch_convert_register_p (gdbarch, rs6000_convert_register_p);
set_gdbarch_register_to_value (gdbarch, rs6000_register_to_value);
set_gdbarch_value_to_register (gdbarch, rs6000_value_to_register);
set_gdbarch_stab_reg_to_regnum (gdbarch, rs6000_stab_reg_to_regnum);
set_gdbarch_dwarf2_reg_to_regnum (gdbarch, rs6000_dwarf2_reg_to_regnum);
if (wordsize == 4)
set_gdbarch_push_dummy_call (gdbarch, ppc_sysv_abi_push_dummy_call);
else if (wordsize == 8)
set_gdbarch_push_dummy_call (gdbarch, ppc64_sysv_abi_push_dummy_call);
set_gdbarch_skip_prologue (gdbarch, rs6000_skip_prologue);
set_gdbarch_in_function_epilogue_p (gdbarch, rs6000_in_function_epilogue_p);
set_gdbarch_skip_main_prologue (gdbarch, rs6000_skip_main_prologue);
set_gdbarch_inner_than (gdbarch, core_addr_lessthan);
set_gdbarch_breakpoint_from_pc (gdbarch, rs6000_breakpoint_from_pc);
/* The value of symbols of type N_SO and N_FUN maybe null when
it shouldn't be. */
set_gdbarch_sofun_address_maybe_missing (gdbarch, 1);
/* Handles single stepping of atomic sequences. */
set_gdbarch_software_single_step (gdbarch, ppc_deal_with_atomic_sequence);
/* Not sure on this. FIXMEmgo */
set_gdbarch_frame_args_skip (gdbarch, 8);
/* Helpers for function argument information. */
set_gdbarch_fetch_pointer_argument (gdbarch, rs6000_fetch_pointer_argument);
/* Trampoline. */
set_gdbarch_in_solib_return_trampoline
(gdbarch, rs6000_in_solib_return_trampoline);
set_gdbarch_skip_trampoline_code (gdbarch, rs6000_skip_trampoline_code);
/* Hook in the DWARF CFI frame unwinder. */
dwarf2_append_unwinders (gdbarch);
dwarf2_frame_set_adjust_regnum (gdbarch, rs6000_adjust_frame_regnum);
/* Frame handling. */
dwarf2_frame_set_init_reg (gdbarch, ppc_dwarf2_frame_init_reg);
/* Setup displaced stepping. */
set_gdbarch_displaced_step_copy_insn (gdbarch,
simple_displaced_step_copy_insn);
set_gdbarch_displaced_step_fixup (gdbarch, ppc_displaced_step_fixup);
set_gdbarch_displaced_step_free_closure (gdbarch,
simple_displaced_step_free_closure);
set_gdbarch_displaced_step_location (gdbarch,
displaced_step_at_entry_point);
set_gdbarch_max_insn_length (gdbarch, PPC_INSN_SIZE);
/* Hook in ABI-specific overrides, if they have been registered. */
info.target_desc = tdesc;
info.tdep_info = (void *) tdesc_data;
gdbarch_init_osabi (info, gdbarch);
switch (info.osabi)
{
case GDB_OSABI_LINUX:
case GDB_OSABI_NETBSD_AOUT:
case GDB_OSABI_NETBSD_ELF:
case GDB_OSABI_UNKNOWN:
set_gdbarch_unwind_pc (gdbarch, rs6000_unwind_pc);
frame_unwind_append_unwinder (gdbarch, &rs6000_frame_unwind);
set_gdbarch_dummy_id (gdbarch, rs6000_dummy_id);
frame_base_append_sniffer (gdbarch, rs6000_frame_base_sniffer);
break;
default:
set_gdbarch_believe_pcc_promotion (gdbarch, 1);
set_gdbarch_unwind_pc (gdbarch, rs6000_unwind_pc);
frame_unwind_append_unwinder (gdbarch, &rs6000_frame_unwind);
set_gdbarch_dummy_id (gdbarch, rs6000_dummy_id);
frame_base_append_sniffer (gdbarch, rs6000_frame_base_sniffer);
}
set_tdesc_pseudo_register_type (gdbarch, rs6000_pseudo_register_type);
set_tdesc_pseudo_register_reggroup_p (gdbarch,
rs6000_pseudo_register_reggroup_p);
tdesc_use_registers (gdbarch, tdesc, tdesc_data);
/* Override the normal target description method to make the SPE upper
halves anonymous. */
set_gdbarch_register_name (gdbarch, rs6000_register_name);
/* Choose register numbers for all supported pseudo-registers. */
tdep->ppc_ev0_regnum = -1;
tdep->ppc_dl0_regnum = -1;
tdep->ppc_vsr0_regnum = -1;
tdep->ppc_efpr0_regnum = -1;
cur_reg = gdbarch_num_regs (gdbarch);
if (have_spe)
{
tdep->ppc_ev0_regnum = cur_reg;
cur_reg += 32;
}
if (have_dfp)
{
tdep->ppc_dl0_regnum = cur_reg;
cur_reg += 16;
}
if (have_vsx)
{
tdep->ppc_vsr0_regnum = cur_reg;
cur_reg += 64;
tdep->ppc_efpr0_regnum = cur_reg;
cur_reg += 32;
}
gdb_assert (gdbarch_num_regs (gdbarch)
+ gdbarch_num_pseudo_regs (gdbarch) == cur_reg);
return gdbarch;
}
static void
rs6000_dump_tdep (struct gdbarch *gdbarch, struct ui_file *file)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
if (tdep == NULL)
return;
/* FIXME: Dump gdbarch_tdep. */
}
/* PowerPC-specific commands. */
static void
set_powerpc_command (char *args, int from_tty)
{
printf_unfiltered (_("\
\"set powerpc\" must be followed by an appropriate subcommand.\n"));
help_list (setpowerpccmdlist, "set powerpc ", all_commands, gdb_stdout);
}
static void
show_powerpc_command (char *args, int from_tty)
{
cmd_show_list (showpowerpccmdlist, from_tty, "");
}
static void
powerpc_set_soft_float (char *args, int from_tty,
struct cmd_list_element *c)
{
struct gdbarch_info info;
/* Update the architecture. */
gdbarch_info_init (&info);
if (!gdbarch_update_p (info))
internal_error (__FILE__, __LINE__, "could not update architecture");
}
static void
powerpc_set_vector_abi (char *args, int from_tty,
struct cmd_list_element *c)
{
struct gdbarch_info info;
enum powerpc_vector_abi vector_abi;
for (vector_abi = POWERPC_VEC_AUTO;
vector_abi != POWERPC_VEC_LAST;
vector_abi++)
if (strcmp (powerpc_vector_abi_string,
powerpc_vector_strings[vector_abi]) == 0)
{
powerpc_vector_abi_global = vector_abi;
break;
}
if (vector_abi == POWERPC_VEC_LAST)
internal_error (__FILE__, __LINE__, _("Invalid vector ABI accepted: %s."),
powerpc_vector_abi_string);
/* Update the architecture. */
gdbarch_info_init (&info);
if (!gdbarch_update_p (info))
internal_error (__FILE__, __LINE__, "could not update architecture");
}
/* Initialization code. */
extern initialize_file_ftype _initialize_rs6000_tdep; /* -Wmissing-prototypes */
void
_initialize_rs6000_tdep (void)
{
gdbarch_register (bfd_arch_rs6000, rs6000_gdbarch_init, rs6000_dump_tdep);
gdbarch_register (bfd_arch_powerpc, rs6000_gdbarch_init, rs6000_dump_tdep);
/* Initialize the standard target descriptions. */
initialize_tdesc_powerpc_32 ();
initialize_tdesc_powerpc_altivec32 ();
initialize_tdesc_powerpc_vsx32 ();
initialize_tdesc_powerpc_403 ();
initialize_tdesc_powerpc_403gc ();
initialize_tdesc_powerpc_505 ();
initialize_tdesc_powerpc_601 ();
initialize_tdesc_powerpc_602 ();
initialize_tdesc_powerpc_603 ();
initialize_tdesc_powerpc_604 ();
initialize_tdesc_powerpc_64 ();
initialize_tdesc_powerpc_altivec64 ();
initialize_tdesc_powerpc_vsx64 ();
initialize_tdesc_powerpc_7400 ();
initialize_tdesc_powerpc_750 ();
initialize_tdesc_powerpc_860 ();
initialize_tdesc_powerpc_e500 ();
initialize_tdesc_rs6000 ();
/* Add root prefix command for all "set powerpc"/"show powerpc"
commands. */
add_prefix_cmd ("powerpc", no_class, set_powerpc_command,
_("Various PowerPC-specific commands."),
&setpowerpccmdlist, "set powerpc ", 0, &setlist);
add_prefix_cmd ("powerpc", no_class, show_powerpc_command,
_("Various PowerPC-specific commands."),
&showpowerpccmdlist, "show powerpc ", 0, &showlist);
/* Add a command to allow the user to force the ABI. */
add_setshow_auto_boolean_cmd ("soft-float", class_support,
&powerpc_soft_float_global,
_("Set whether to use a soft-float ABI."),
_("Show whether to use a soft-float ABI."),
NULL,
powerpc_set_soft_float, NULL,
&setpowerpccmdlist, &showpowerpccmdlist);
add_setshow_enum_cmd ("vector-abi", class_support, powerpc_vector_strings,
&powerpc_vector_abi_string,
_("Set the vector ABI."),
_("Show the vector ABI."),
NULL, powerpc_set_vector_abi, NULL,
&setpowerpccmdlist, &showpowerpccmdlist);
}
Reference in New Issue View Git Blame Copy Permalink