binutils-gdb/gdb/testsuite/gdb.base/dbx.exp

327 lines
10 KiB
Plaintext

# Copyright 1998-2016 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>. */
standard_testfile average.c sum.c
if {[build_executable $testfile.exp $testfile \
[list $srcfile $srcfile2] debug] == -1} {
untested $testfile.exp
return -1
}
#
# start gdb -- start gdb running, default procedure
#
proc dbx_gdb_start { } {
global verbose
global GDB
global INTERNAL_GDBFLAGS GDBFLAGS
global prompt
global spawn_id
global timeout
verbose "Spawning $GDB -dbx $INTERNAL_GDBFLAGS $GDBFLAGS"
if { [which $GDB] == 0 } then {
perror "$GDB does not exist."
exit 1
}
set oldtimeout $timeout
set timeout [expr "$timeout + 60"]
eval "spawn $GDB -dbx $INTERNAL_GDBFLAGS $GDBFLAGS"
gdb_expect {
-re ".*\r\n$gdb_prompt $" {
verbose "GDB initialized."
}
-re "$prompt $" {
perror "GDB never initialized."
return -1
}
timeout {
perror "(timeout) GDB never initialized."
return -1
}
}
set timeout $oldtimeout
# force the height to "unlimited", so no pagers get used
send_gdb "set height 0\n"
gdb_expect {
-re ".*$prompt $" {
verbose "Setting height to 0." 2
}
timeout {
warning "Couldn't set the height to 0."
}
}
# force the width to "unlimited", so no wraparound occurs
send_gdb "set width 0\n"
gdb_expect {
-re ".*$prompt $" {
verbose "Setting width to 0." 2
}
timeout {
warning "Couldn't set the width to 0."
}
}
}
proc dbx_reinitialize_dir { subdir } {
global gdb_prompt
send_gdb "use\n"
gdb_expect {
-re "Reinitialize source path to empty.*y or n. " {
send_gdb "y\n"
gdb_expect {
-re "Source directories searched.*$gdb_prompt $" {
send_gdb "use $subdir\n"
gdb_expect {
-re "Source directories searched.*$gdb_prompt $" {
verbose "Dir set to $subdir"
}
-re ".*$gdb_prompt $" {
perror "Dir \"$subdir\" failed."
}
}
}
-re ".*$gdb_prompt $" {
perror "Dir \"$subdir\" failed."
}
}
}
-re ".*$gdb_prompt $" {
perror "Dir \"$subdir\" failed."
}
}
}
# In "testsuite/config/unix-gdb.exp", the routine "gdb_load"
# is defined as "gdb_file_cmd". The binding of "gdb_file_cmd"
# is done at invocation time. Before this file is processed,
# it binds to the definition in "testsuite/lib/gdb.exp"; after
# this file is processed, it binds to this definition.
# TCL lets us overrides a previous routine definition without a
# warning (isn't that special?).
#
# This means that tests before use "file" to load a target, and
# tests afterwards use the pair "symbol-file" "exec-file".
#
# I'm leaving it as it is for now because at the moment it
# is the only test we have of the use of the combination of
# "symbol-file" and "exec-file" to load a debugging target (the
# other definition uses "file".
#
# Symbol-file and exec-file should be tested explicitly, not
# as a side effect of running a particular test (in this case,
# "testsuite/gdb.compat/dbx.exp").
#
# CM: Renamed the procedure so it does not override the orginal file name.
# Having the test suite change behavior depending on the tests run makes
# it extremely difficult to reproduce errors. I've also added a
# "dbx_gdb_load" procedure. This and only this test will call these
# procedures now. I also added an "expect" to the "send exec-file" line.
# The "expect" waits for a prompt to appear. Otherwise, if the tests run
# too quickly, the caller could send another command before the prompt
# of this command returns, causing the test to get out of sync and fail
# seemingly randomly or only on a loaded system.
#
# Problem is, though, that the testsuite config files can override the definition of
# gdb_load (without notice, as was mentioned above). Unfortunately, the gdb_load proc
# that was copied into this test was a copy of the unix native version.
#
# The real problem that we're attempting to solve is how to load an exec and symbol
# file into gdb for a dbx session. So why not just override gdb_file_cmd with the
# right sequence of events, allowing gdb_load to do its normal thing? This way
# remotes and simulators will work, too.
#
# [drow 2002-03-30]: We can restore the old gdb_file_cmd afterwards, though.
set old_gdb_file_cmd_args [info args gdb_file_cmd]
set old_gdb_file_cmd_body [info body gdb_file_cmd]
proc gdb_file_cmd {arg} {
global verbose
global loadpath
global loadfile
global GDB
global gdb_prompt
global spawn_id
upvar timeout timeout
global last_loaded_file
set last_loaded_file $arg
if [is_remote host] {
set arg [remote_download host $arg]
if { $arg == "" } {
error "download failed"
return -1
}
}
send_gdb "symbol-file $arg\n"
gdb_expect {
-re "Detected 64-bit symbol file.\r\nInvoking.*gdb64.*$gdb_prompt $" {
verbose "\t\tLoaded $arg into the $GDB"
send_gdb "exec-file $arg\n"
gdb_expect {
-re ".*$gdb_prompt $" {
verbose "\t\tLoaded $arg with new symbol table into $GDB"
return 0
}
timeout {
perror "(timeout) Couldn't load $arg"
return -1
}
}
return 0
}
-re "Reading symbols from.*done.*$gdb_prompt $" {
verbose "\t\tLoaded $arg into the $GDB"
send_gdb "exec-file $arg\n"
gdb_expect {
-re "A program is being debugged already.*Kill it.*y or n. $" {
send_gdb "y\n"
verbose "\t\tKilling previous program being debugged"
exp_continue
}
-re ".*$gdb_prompt $" {
verbose "\t\tLoaded $arg with new symbol table into $GDB"
return 0
}
timeout {
perror "(timeout) Couldn't load $arg"
return -1
}
}
return 0
}
-re "has no symbol-table.*$gdb_prompt $" {
perror "$arg wasn't compiled with \"-g\""
return -1
}
-re "Load new symbol table from \".*\".*y or n. $" {
send_gdb "y\n"
exp_continue
}
-re ".*No such file or directory.*$gdb_prompt $" {
perror "($arg) No such file or directory\n"
return -1
}
-re "$gdb_prompt $" {
perror "couldn't load $arg into $GDB."
return -1
}
timeout {
perror "couldn't load $arg into $GDB (timed out)."
return -1
}
eof {
# This is an attempt to detect a core dump, but seems not to
# work. Perhaps we need to match .* followed by eof, in which
# expect does not seem to have a way to do that.
perror "couldn't load $arg into $GDB (end of file)."
return -1
}
}
}
#
#test_breakpoints
#
proc test_breakpoints { } {
set stop_line [gdb_get_line_number "stop-in-main"]
gdb_test "stop in main" "Breakpoint.*at.*: file.*average\.c, line $stop_line\."
gdb_test "status" "Num.*Type.*Disp.*Enb.*Address.*What\r\n1\[ \r\]+breakpoint\[ \r\]+keep y.*in main at.*average\.c:$stop_line.*"
set stop_line [gdb_get_line_number "stop-at-call"]
gdb_test "stop at average.c:$stop_line" "Breakpoint.*at.*: file.*average\.c, line $stop_line.*"
gdb_test "stop in average.c:$stop_line" "Usage: stop in <function . address>"
gdb_test "stop at main" "Usage: stop at <line>"
}
#
#test_assign
#
proc test_assign { } {
global decimal
global gdb_prompt
gdb_run_cmd
set test "running to main"
gdb_test_multiple "" $test {
-re "Break.* at .*:$decimal.*$gdb_prompt $" {
pass $test
}
-re "Breakpoint \[0-9\]*, \[0-9xa-f\]* in .*$gdb_prompt $" {
pass $test
}
}
send_gdb "assign first=1\n"
gdb_expect {
-re "No symbol \"first\" in current context.*$" { fail "assign first" }
-re "$gdb_prompt $" { pass "assign first" }
timeout { fail "assign first (timeout)" }
}
gdb_test "print first" ".1 = 1"
}
#
#test_whereis
#
proc test_whereis { } {
gdb_test "whereis my_list" "All variables matching regular expression \"my_list\":\r\n\r\nFile.*average\.c:\r\nstatic int my_list\\\[10\\\];"
}
#
#test_func
#
proc test_func { } {
global decimal
global srcfile2
gdb_test "cont" ".*" "cont 1"
gdb_test "step" ".*"
gdb_test "func sum" "'sum' not within current stack frame\."
set stop_line [gdb_get_line_number "stop-in-sum" $srcfile2]
gdb_test "stop in sum" "Breakpoint.*at.*: file.*sum\.c, line $stop_line\."
gdb_test "cont" ".*" "cont 2"
gdb_test "func print_average" ".*in print_average.*\\(list=.*, low=0, high=6\\).*at.*average\.c:${decimal}\r\n${decimal}\[ \t\]+total = sum\\(list, low, high\\);"
}
# Start with a fresh gdb.
gdb_exit
global GDBFLAGS
set saved_gdbflags $GDBFLAGS
set GDBFLAGS "$GDBFLAGS --dbx"
gdb_start
dbx_reinitialize_dir $srcdir/$subdir
gdb_load ${binfile}
test_breakpoints
test_assign
test_whereis
gdb_test "file average.c:1" "1\[ \t\]+/. This is a sample program.*"
test_func
#exit and cleanup
gdb_exit
set GDBFLAGS $saved_gdbflags
eval proc gdb_file_cmd {$old_gdb_file_cmd_args} {$old_gdb_file_cmd_body}
return 0