binutils-gdb/gdb/testsuite/gdb.base/a2-run.exp

258 lines
6.9 KiB
Plaintext

# Copyright 1988, 1990, 1991, 1992, 1994, 1995, 1996, 1997, 1999, 2000
# Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
# Please email any bugs, comments, and/or additions to this file to:
# bug-gdb@prep.ai.mit.edu
# This file was written by Rob Savoye. (rob@cygnus.com)
# These tests don't work for targets can't take arguments...
if [target_info exists noargs] then {
verbose "Skipping a2-run.exp because of noargs."
return
}
# Can't do this test without stdio support.
if [gdb_skip_stdio_test "a2run.exp"] {
return
}
if $tracelevel then {
strace $tracelevel
}
#
# test running programs
#
set prms_id 0
set bug_id 0
set testfile "run"
set srcfile ${testfile}.c
set binfile ${objdir}/${subdir}/${testfile}
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
}
gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${binfile}
# Run with no arguments.
# On VxWorks this justs make sure the program was run.
gdb_run_cmd
if [istarget "*-*-vxworks*"] then {
set timeout 120
verbose "Timeout is now $timeout seconds" 2
gdb_expect {
"Program exited normally" {
unresolved "run \"$testfile\" with no args"
}
-re "usage: factorial <number>" {
pass "run \"$testfile\" with no args"
}
timeout {
fail "(timeout) run \"$testfile\" with no args"
}
}
set timeout 10
verbose "Timeout is now $timeout seconds" 2
gdb_expect -re "$gdb_prompt $" {}
} else {
gdb_expect {
-re ".*usage: factorial <number>.*Program exited with code 01.*$gdb_prompt $" {
pass "run \"$testfile\" with no args"
}
-re ".*usage: factorial <number>.* EXIT code 1.*Program exited normally.*$gdb_prompt $" {
pass "run \"$testfile\" with no args (exit wrapper)"
}
-re ".*$gdb_prompt $" {
fail "run \"$testfile\" with no args"
verbose "expect_out is $expect_out(buffer)" 2
}
timeout {
fail "(timeout) run \"$testfile\" no args"
}
}
}
# Now run with some arguments
if [istarget "*-*-vxworks*"] then {
send_gdb "run vxmain \"5\"\n"
gdb_expect -re "run vxmain \"5\"\r\n" {}
set timeout 120
verbose "Timeout is now $timeout seconds" 2
gdb_expect {
"Program exited normally" {
unresolved "run \"$testfile\" with arg"
}
"120" {
pass "run \"$testfile\" with arg"
}
timeout {
fail "(timeout) run \"$testfile\" with arg"
}
}
set timeout 10
verbose "Timeout is now $timeout seconds" 2
gdb_expect -re "$gdb_prompt $" {}
} else {
setup_xfail "mips-idt-*" "arm-*-coff strongarm-*-coff"
gdb_run_cmd 5
gdb_expect {
-re ".*120.*$gdb_prompt $"\
{ pass "run \"$testfile\" with arg" }
-re ".*$gdb_prompt $" { fail "run \"$testfile\" with arg" }
timeout { fail "(timeout) run \"$testfile\" with arg" }
}
}
# Run again with same arguments.
setup_xfail "mips-idt-*"
gdb_run_cmd
if [istarget "*-*-vxworks*"] then {
set timeout 120
verbose "Timeout is now $timeout seconds" 2
gdb_expect {
"Program exited normally" {
unresolved "run \"$testfile\" again with same args"
}
"120" { pass "run \"$testfile\" again with same args" }
timeout { fail "(timeout) run \"$testfile\" again with same args" }
}
set timeout 10
verbose "Timeout is now $timeout seconds" 2
gdb_expect -re "$gdb_prompt $" {}
} else {
setup_xfail "arm-*-coff strongarm-*-coff"
gdb_expect {
-re ".*120.*$gdb_prompt $"\
{ pass "run \"$testfile\" again with same args" }
-re ".*$gdb_prompt $" { fail "run \"$testfile\" again with same args" }
timeout { fail "(timeout) run \"$testfile\" again with same args" }
}
}
# Use "set args" command to specify no arguments as default and run again.
if [istarget "*-*-vxworks*"] then {
send_gdb "set args main\n"
} else {
send_gdb "set args\n"
}
gdb_expect -re "$gdb_prompt $"
gdb_run_cmd
if [istarget "*-*-vxworks*"] then {
set timeout 120
verbose "Timeout is now $timeout seconds" 2
gdb_expect {
"Program exited normally" {
unresolved "run after setting args to nil"
}
"usage: factorial <number>" {
pass "run after setting args to nil"
}
timeout {
fail "(timeout) run after setting args to nil"
}
}
set timeout 10
verbose "Timeout is now $timeout seconds" 2
gdb_expect -re "$gdb_prompt $" {}
} else {
gdb_expect {
-re ".*usage: factorial <number>.*$gdb_prompt $" {
pass "run after setting args to nil"
}
-re ".*$gdb_prompt $" {
fail "run after setting args to nil"
}
timeout {
fail "(timeout) run after setting args to nil"
}
}
}
# Use "set args" command to specify an argument and run again.
setup_xfail "mips-idt-*"
if [istarget "*-*-vxworks*"] then {
send_gdb "set args vxmain \"6\"\n"
} else {
send_gdb "set args 6\n"
}
gdb_expect -re "$gdb_prompt $"
gdb_run_cmd
if [istarget "*-*-vxworks*"] then {
set timeout 120
verbose "Timeout is now $timeout seconds" 2
gdb_expect {
"Program exited normally" {
unresolved "run \"$testfile\" again after setting args"
}
"720" {
pass "run \"$testfile\" again after setting args"
}
timeout {
fail "(timeout) run \"$testfile\" again after setting args"
}
}
set timeout 10
verbose "Timeout is now $timeout seconds" 2
gdb_expect -re "$gdb_prompt $" {}
} else {
setup_xfail "arm-*-coff strongarm-*-coff"
gdb_expect {
-re ".*720.*$gdb_prompt $" {
pass "run \"$testfile\" again after setting args"
}
-re ".*$gdb_prompt $" {
fail "run \"$testfile\" again after setting args"
}
timeout {
fail "(timeout) run \"$testfile\" again after setting args"
}
}
}
# GOAL: Test that shell is being used with "run". For remote debugging
# targets, there is no guarantee that a "shell" (whatever that is) is used.
if ![is_remote target] then {
send_gdb "run `echo 8`\n"
gdb_expect {
-re "Starting program.*40320.*$gdb_prompt $" {
pass "run \"$testfile\" with shell"
}
-re ".*$gdb_prompt $" {
fail "run \"$testfile\" with shell"
}
timeout {
fail "(timeout) run \"$testfile\" with shell"
}
}
}
# Reset the default arguments for VxWorks
if [istarget "*-*-vxworks*"] then {
send_gdb "set args main\n"
gdb_expect -re ".*$gdb_prompt $" {}
}