56d438b172
Chao-ying Fu <Chao-ying.Fu@imgtec.com> * config/tc-mips.c (options): Add OPTION_MSA and OPTION_NO_MSA. (md_longopts): Add mmsa and mno-msa. (mips_ases): Add msa. (RTYPE_MASK): Update. (RTYPE_MSA): New define. (OT_REG_ELEMENT): Replace with... (OT_INTEGER_INDEX, OT_REG_INDEX): ...these new operand types. (mips_operand_token): Replace reg_element with index. (mips_parse_argument_token): Treat vector indices as separate tokens. Handle register indices. (md_begin): Add MSA register names. (operand_reg_mask): Handle cases for OP_IMM_INDEX and OP_REG_INDEX. (convert_reg_type): Handle cases for OP_REG_MSA and OP_REG_MSA_CTRL. (match_mdmx_imm_reg_operand): Update accordingly. (match_imm_index_operand): New function. (match_reg_index_operand): New function. (match_operand): Handle cases for OP_IMM_INDEX and OP_REG_INDEX. (md_convert_frag): Convert bz.b/h/w/d, bnz.b/h/w/d, bz.v bnz.v. (md_show_usage): Print -mmsa and -mno-msa. * doc/as.texinfo: Document -mmsa and -mno-msa. * doc/c-mips.texi: Document -mmsa and -mno-msa. Document .set msa and .set nomsa.
927 lines
34 KiB
Plaintext
927 lines
34 KiB
Plaintext
@c Copyright 1991, 1992, 1993, 1994, 1995, 1997, 1999, 2000, 2001,
|
|
@c 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2013
|
|
@c Free Software Foundation, Inc.
|
|
@c This is part of the GAS manual.
|
|
@c For copying conditions, see the file as.texinfo.
|
|
@ifset GENERIC
|
|
@page
|
|
@node MIPS-Dependent
|
|
@chapter MIPS Dependent Features
|
|
@end ifset
|
|
@ifclear GENERIC
|
|
@node Machine Dependencies
|
|
@chapter MIPS Dependent Features
|
|
@end ifclear
|
|
|
|
@cindex MIPS processor
|
|
@sc{gnu} @code{@value{AS}} for MIPS architectures supports several
|
|
different MIPS processors, and MIPS ISA levels I through V, MIPS32,
|
|
and MIPS64. For information about the MIPS instruction set, see
|
|
@cite{MIPS RISC Architecture}, by Kane and Heindrich (Prentice-Hall).
|
|
For an overview of MIPS assembly conventions, see ``Appendix D:
|
|
Assembly Language Programming'' in the same work.
|
|
|
|
@menu
|
|
* MIPS Options:: Assembler options
|
|
* MIPS Macros:: High-level assembly macros
|
|
* MIPS Symbol Sizes:: Directives to override the size of symbols
|
|
* MIPS Small Data:: Controlling the use of small data accesses
|
|
* MIPS ISA:: Directives to override the ISA level
|
|
* MIPS assembly options:: Directives to control code generation
|
|
* MIPS autoextend:: Directives for extending MIPS 16 bit instructions
|
|
* MIPS insn:: Directive to mark data as an instruction
|
|
* MIPS NaN Encodings:: Directives to record which NaN encoding is being used
|
|
* MIPS Option Stack:: Directives to save and restore options
|
|
* MIPS ASE Instruction Generation Overrides:: Directives to control
|
|
generation of MIPS ASE instructions
|
|
* MIPS Floating-Point:: Directives to override floating-point options
|
|
* MIPS Syntax:: MIPS specific syntactical considerations
|
|
@end menu
|
|
|
|
@node MIPS Options
|
|
@section Assembler options
|
|
|
|
The MIPS configurations of @sc{gnu} @code{@value{AS}} support these
|
|
special options:
|
|
|
|
@table @code
|
|
@cindex @code{-G} option (MIPS)
|
|
@item -G @var{num}
|
|
Set the ``small data'' limit to @var{n} bytes. The default limit is 8 bytes.
|
|
@xref{MIPS Small Data,, Controlling the use of small data accesses}.
|
|
|
|
@cindex @code{-EB} option (MIPS)
|
|
@cindex @code{-EL} option (MIPS)
|
|
@cindex MIPS big-endian output
|
|
@cindex MIPS little-endian output
|
|
@cindex big-endian output, MIPS
|
|
@cindex little-endian output, MIPS
|
|
@item -EB
|
|
@itemx -EL
|
|
Any MIPS configuration of @code{@value{AS}} can select big-endian or
|
|
little-endian output at run time (unlike the other @sc{gnu} development
|
|
tools, which must be configured for one or the other). Use @samp{-EB}
|
|
to select big-endian output, and @samp{-EL} for little-endian.
|
|
|
|
@item -KPIC
|
|
@cindex PIC selection, MIPS
|
|
@cindex @option{-KPIC} option, MIPS
|
|
Generate SVR4-style PIC. This option tells the assembler to generate
|
|
SVR4-style position-independent macro expansions. It also tells the
|
|
assembler to mark the output file as PIC.
|
|
|
|
@item -mvxworks-pic
|
|
@cindex @option{-mvxworks-pic} option, MIPS
|
|
Generate VxWorks PIC. This option tells the assembler to generate
|
|
VxWorks-style position-independent macro expansions.
|
|
|
|
@cindex MIPS architecture options
|
|
@item -mips1
|
|
@itemx -mips2
|
|
@itemx -mips3
|
|
@itemx -mips4
|
|
@itemx -mips5
|
|
@itemx -mips32
|
|
@itemx -mips32r2
|
|
@itemx -mips64
|
|
@itemx -mips64r2
|
|
Generate code for a particular MIPS Instruction Set Architecture level.
|
|
@samp{-mips1} corresponds to the R2000 and R3000 processors,
|
|
@samp{-mips2} to the R6000 processor, @samp{-mips3} to the
|
|
R4000 processor, and @samp{-mips4} to the R8000 and R10000 processors.
|
|
@samp{-mips5}, @samp{-mips32}, @samp{-mips32r2}, @samp{-mips64}, and
|
|
@samp{-mips64r2} correspond to generic MIPS V, MIPS32, MIPS32 Release 2,
|
|
MIPS64, and MIPS64 Release 2 ISA processors, respectively. You can also
|
|
switch instruction sets during the assembly; see @ref{MIPS ISA,
|
|
Directives to override the ISA level}.
|
|
|
|
@item -mgp32
|
|
@itemx -mfp32
|
|
Some macros have different expansions for 32-bit and 64-bit registers.
|
|
The register sizes are normally inferred from the ISA and ABI, but these
|
|
flags force a certain group of registers to be treated as 32 bits wide at
|
|
all times. @samp{-mgp32} controls the size of general-purpose registers
|
|
and @samp{-mfp32} controls the size of floating-point registers.
|
|
|
|
The @code{.set gp=32} and @code{.set fp=32} directives allow the size
|
|
of registers to be changed for parts of an object. The default value is
|
|
restored by @code{.set gp=default} and @code{.set fp=default}.
|
|
|
|
On some MIPS variants there is a 32-bit mode flag; when this flag is
|
|
set, 64-bit instructions generate a trap. Also, some 32-bit OSes only
|
|
save the 32-bit registers on a context switch, so it is essential never
|
|
to use the 64-bit registers.
|
|
|
|
@item -mgp64
|
|
@itemx -mfp64
|
|
Assume that 64-bit registers are available. This is provided in the
|
|
interests of symmetry with @samp{-mgp32} and @samp{-mfp32}.
|
|
|
|
The @code{.set gp=64} and @code{.set fp=64} directives allow the size
|
|
of registers to be changed for parts of an object. The default value is
|
|
restored by @code{.set gp=default} and @code{.set fp=default}.
|
|
|
|
@item -mips16
|
|
@itemx -no-mips16
|
|
Generate code for the MIPS 16 processor. This is equivalent to putting
|
|
@code{.set mips16} at the start of the assembly file. @samp{-no-mips16}
|
|
turns off this option.
|
|
|
|
@item -mmicromips
|
|
@itemx -mno-micromips
|
|
Generate code for the microMIPS processor. This is equivalent to putting
|
|
@code{.set micromips} at the start of the assembly file. @samp{-mno-micromips}
|
|
turns off this option. This is equivalent to putting @code{.set nomicromips}
|
|
at the start of the assembly file.
|
|
|
|
@item -msmartmips
|
|
@itemx -mno-smartmips
|
|
Enables the SmartMIPS extensions to the MIPS32 instruction set, which
|
|
provides a number of new instructions which target smartcard and
|
|
cryptographic applications. This is equivalent to putting
|
|
@code{.set smartmips} at the start of the assembly file.
|
|
@samp{-mno-smartmips} turns off this option.
|
|
|
|
@item -mips3d
|
|
@itemx -no-mips3d
|
|
Generate code for the MIPS-3D Application Specific Extension.
|
|
This tells the assembler to accept MIPS-3D instructions.
|
|
@samp{-no-mips3d} turns off this option.
|
|
|
|
@item -mdmx
|
|
@itemx -no-mdmx
|
|
Generate code for the MDMX Application Specific Extension.
|
|
This tells the assembler to accept MDMX instructions.
|
|
@samp{-no-mdmx} turns off this option.
|
|
|
|
@item -mdsp
|
|
@itemx -mno-dsp
|
|
Generate code for the DSP Release 1 Application Specific Extension.
|
|
This tells the assembler to accept DSP Release 1 instructions.
|
|
@samp{-mno-dsp} turns off this option.
|
|
|
|
@item -mdspr2
|
|
@itemx -mno-dspr2
|
|
Generate code for the DSP Release 2 Application Specific Extension.
|
|
This option implies -mdsp.
|
|
This tells the assembler to accept DSP Release 2 instructions.
|
|
@samp{-mno-dspr2} turns off this option.
|
|
|
|
@item -mmt
|
|
@itemx -mno-mt
|
|
Generate code for the MT Application Specific Extension.
|
|
This tells the assembler to accept MT instructions.
|
|
@samp{-mno-mt} turns off this option.
|
|
|
|
@item -mmcu
|
|
@itemx -mno-mcu
|
|
Generate code for the MCU Application Specific Extension.
|
|
This tells the assembler to accept MCU instructions.
|
|
@samp{-mno-mcu} turns off this option.
|
|
|
|
@item -mmsa
|
|
@itemx -mno-msa
|
|
Generate code for the MIPS SIMD Architecture Extension.
|
|
This tells the assembler to accept MSA instructions.
|
|
@samp{-mno-msa} turns off this option.
|
|
|
|
@item -mvirt
|
|
@itemx -mno-virt
|
|
Generate code for the Virtualization Application Specific Extension.
|
|
This tells the assembler to accept Virtualization instructions.
|
|
@samp{-mno-virt} turns off this option.
|
|
|
|
@item -minsn32
|
|
@itemx -mno-insn32
|
|
Only use 32-bit instruction encodings when generating code for the
|
|
microMIPS processor. This option inhibits the use of any 16-bit
|
|
instructions. This is equivalent to putting @code{.set insn32} at
|
|
the start of the assembly file. @samp{-mno-insn32} turns off this
|
|
option. This is equivalent to putting @code{.set noinsn32} at the
|
|
start of the assembly file. By default @samp{-mno-insn32} is
|
|
selected, allowing all instructions to be used.
|
|
|
|
@item -mfix7000
|
|
@itemx -mno-fix7000
|
|
Cause nops to be inserted if the read of the destination register
|
|
of an mfhi or mflo instruction occurs in the following two instructions.
|
|
|
|
@item -mfix-loongson2f-jump
|
|
@itemx -mno-fix-loongson2f-jump
|
|
Eliminate instruction fetch from outside 256M region to work around the
|
|
Loongson2F @samp{jump} instructions. Without it, under extreme cases,
|
|
the kernel may crash. The issue has been solved in latest processor
|
|
batches, but this fix has no side effect to them.
|
|
|
|
@item -mfix-loongson2f-nop
|
|
@itemx -mno-fix-loongson2f-nop
|
|
Replace nops by @code{or at,at,zero} to work around the Loongson2F
|
|
@samp{nop} errata. Without it, under extreme cases, the CPU might
|
|
deadlock. The issue has been solved in later Loongson2F batches, but
|
|
this fix has no side effect to them.
|
|
|
|
@item -mfix-vr4120
|
|
@itemx -mno-fix-vr4120
|
|
Insert nops to work around certain VR4120 errata. This option is
|
|
intended to be used on GCC-generated code: it is not designed to catch
|
|
all problems in hand-written assembler code.
|
|
|
|
@item -mfix-vr4130
|
|
@itemx -mno-fix-vr4130
|
|
Insert nops to work around the VR4130 @samp{mflo}/@samp{mfhi} errata.
|
|
|
|
@item -mfix-24k
|
|
@itemx -mno-fix-24k
|
|
Insert nops to work around the 24K @samp{eret}/@samp{deret} errata.
|
|
|
|
@item -mfix-cn63xxp1
|
|
@itemx -mno-fix-cn63xxp1
|
|
Replace @code{pref} hints 0 - 4 and 6 - 24 with hint 28 to work around
|
|
certain CN63XXP1 errata.
|
|
|
|
@item -m4010
|
|
@itemx -no-m4010
|
|
Generate code for the LSI R4010 chip. This tells the assembler to
|
|
accept the R4010-specific instructions (@samp{addciu}, @samp{ffc},
|
|
etc.), and to not schedule @samp{nop} instructions around accesses to
|
|
the @samp{HI} and @samp{LO} registers. @samp{-no-m4010} turns off this
|
|
option.
|
|
|
|
@item -m4650
|
|
@itemx -no-m4650
|
|
Generate code for the MIPS R4650 chip. This tells the assembler to accept
|
|
the @samp{mad} and @samp{madu} instruction, and to not schedule @samp{nop}
|
|
instructions around accesses to the @samp{HI} and @samp{LO} registers.
|
|
@samp{-no-m4650} turns off this option.
|
|
|
|
@item -m3900
|
|
@itemx -no-m3900
|
|
@itemx -m4100
|
|
@itemx -no-m4100
|
|
For each option @samp{-m@var{nnnn}}, generate code for the MIPS
|
|
R@var{nnnn} chip. This tells the assembler to accept instructions
|
|
specific to that chip, and to schedule for that chip's hazards.
|
|
|
|
@item -march=@var{cpu}
|
|
Generate code for a particular MIPS CPU. It is exactly equivalent to
|
|
@samp{-m@var{cpu}}, except that there are more value of @var{cpu}
|
|
understood. Valid @var{cpu} value are:
|
|
|
|
@quotation
|
|
2000,
|
|
3000,
|
|
3900,
|
|
4000,
|
|
4010,
|
|
4100,
|
|
4111,
|
|
vr4120,
|
|
vr4130,
|
|
vr4181,
|
|
4300,
|
|
4400,
|
|
4600,
|
|
4650,
|
|
5000,
|
|
rm5200,
|
|
rm5230,
|
|
rm5231,
|
|
rm5261,
|
|
rm5721,
|
|
vr5400,
|
|
vr5500,
|
|
6000,
|
|
rm7000,
|
|
8000,
|
|
rm9000,
|
|
10000,
|
|
12000,
|
|
14000,
|
|
16000,
|
|
4kc,
|
|
4km,
|
|
4kp,
|
|
4ksc,
|
|
4kec,
|
|
4kem,
|
|
4kep,
|
|
4ksd,
|
|
m4k,
|
|
m4kp,
|
|
m14k,
|
|
m14kc,
|
|
m14ke,
|
|
m14kec,
|
|
24kc,
|
|
24kf2_1,
|
|
24kf,
|
|
24kf1_1,
|
|
24kec,
|
|
24kef2_1,
|
|
24kef,
|
|
24kef1_1,
|
|
34kc,
|
|
34kf2_1,
|
|
34kf,
|
|
34kf1_1,
|
|
34kn,
|
|
74kc,
|
|
74kf2_1,
|
|
74kf,
|
|
74kf1_1,
|
|
74kf3_2,
|
|
1004kc,
|
|
1004kf2_1,
|
|
1004kf,
|
|
1004kf1_1,
|
|
5kc,
|
|
5kf,
|
|
20kc,
|
|
25kf,
|
|
sb1,
|
|
sb1a,
|
|
loongson2e,
|
|
loongson2f,
|
|
loongson3a,
|
|
octeon,
|
|
octeon+,
|
|
octeon2,
|
|
xlr,
|
|
xlp
|
|
@end quotation
|
|
|
|
For compatibility reasons, @samp{@var{n}x} and @samp{@var{b}fx} are
|
|
accepted as synonyms for @samp{@var{n}f1_1}. These values are
|
|
deprecated.
|
|
|
|
@item -mtune=@var{cpu}
|
|
Schedule and tune for a particular MIPS CPU. Valid @var{cpu} values are
|
|
identical to @samp{-march=@var{cpu}}.
|
|
|
|
@item -mabi=@var{abi}
|
|
Record which ABI the source code uses. The recognized arguments
|
|
are: @samp{32}, @samp{n32}, @samp{o64}, @samp{64} and @samp{eabi}.
|
|
|
|
@item -msym32
|
|
@itemx -mno-sym32
|
|
@cindex -msym32
|
|
@cindex -mno-sym32
|
|
Equivalent to adding @code{.set sym32} or @code{.set nosym32} to
|
|
the beginning of the assembler input. @xref{MIPS Symbol Sizes}.
|
|
|
|
@cindex @code{-nocpp} ignored (MIPS)
|
|
@item -nocpp
|
|
This option is ignored. It is accepted for command-line compatibility with
|
|
other assemblers, which use it to turn off C style preprocessing. With
|
|
@sc{gnu} @code{@value{AS}}, there is no need for @samp{-nocpp}, because the
|
|
@sc{gnu} assembler itself never runs the C preprocessor.
|
|
|
|
@item -msoft-float
|
|
@itemx -mhard-float
|
|
Disable or enable floating-point instructions. Note that by default
|
|
floating-point instructions are always allowed even with CPU targets
|
|
that don't have support for these instructions.
|
|
|
|
@item -msingle-float
|
|
@itemx -mdouble-float
|
|
Disable or enable double-precision floating-point operations. Note
|
|
that by default double-precision floating-point operations are always
|
|
allowed even with CPU targets that don't have support for these
|
|
operations.
|
|
|
|
@item --construct-floats
|
|
@itemx --no-construct-floats
|
|
The @code{--no-construct-floats} option disables the construction of
|
|
double width floating point constants by loading the two halves of the
|
|
value into the two single width floating point registers that make up
|
|
the double width register. This feature is useful if the processor
|
|
support the FR bit in its status register, and this bit is known (by
|
|
the programmer) to be set. This bit prevents the aliasing of the double
|
|
width register by the single width registers.
|
|
|
|
By default @code{--construct-floats} is selected, allowing construction
|
|
of these floating point constants.
|
|
|
|
@item --relax-branch
|
|
@itemx --no-relax-branch
|
|
The @samp{--relax-branch} option enables the relaxation of out-of-range
|
|
branches. Any branches whose target cannot be reached directly are
|
|
converted to a small instruction sequence including an inverse-condition
|
|
branch to the physically next instruction, and a jump to the original
|
|
target is inserted between the two instructions. In PIC code the jump
|
|
will involve further instructions for address calculation.
|
|
|
|
The @code{BC1ANY2F}, @code{BC1ANY2T}, @code{BC1ANY4F}, @code{BC1ANY4T},
|
|
@code{BPOSGE32} and @code{BPOSGE64} instructions are excluded from
|
|
relaxation, because they have no complementing counterparts. They could
|
|
be relaxed with the use of a longer sequence involving another branch,
|
|
however this has not been implemented and if their target turns out of
|
|
reach, they produce an error even if branch relaxation is enabled.
|
|
|
|
Also no MIPS16 branches are ever relaxed.
|
|
|
|
By default @samp{--no-relax-branch} is selected, causing any out-of-range
|
|
branches to produce an error.
|
|
|
|
@cindex @option{-mnan=} command line option, MIPS
|
|
@item -mnan=@var{encoding}
|
|
This option indicates whether the source code uses the IEEE 2008
|
|
NaN encoding (@option{-mnan=2008}) or the original MIPS encoding
|
|
(@option{-mnan=legacy}). It is equivalent to adding a @code{.nan}
|
|
directive to the beginning of the source file. @xref{MIPS NaN Encodings}.
|
|
|
|
@option{-mnan=legacy} is the default if no @option{-mnan} option or
|
|
@code{.nan} directive is used.
|
|
|
|
@item --trap
|
|
@itemx --no-break
|
|
@c FIXME! (1) reflect these options (next item too) in option summaries;
|
|
@c (2) stop teasing, say _which_ instructions expanded _how_.
|
|
@code{@value{AS}} automatically macro expands certain division and
|
|
multiplication instructions to check for overflow and division by zero. This
|
|
option causes @code{@value{AS}} to generate code to take a trap exception
|
|
rather than a break exception when an error is detected. The trap instructions
|
|
are only supported at Instruction Set Architecture level 2 and higher.
|
|
|
|
@item --break
|
|
@itemx --no-trap
|
|
Generate code to take a break exception rather than a trap exception when an
|
|
error is detected. This is the default.
|
|
|
|
@item -mpdr
|
|
@itemx -mno-pdr
|
|
Control generation of @code{.pdr} sections. Off by default on IRIX, on
|
|
elsewhere.
|
|
|
|
@item -mshared
|
|
@itemx -mno-shared
|
|
When generating code using the Unix calling conventions (selected by
|
|
@samp{-KPIC} or @samp{-mcall_shared}), gas will normally generate code
|
|
which can go into a shared library. The @samp{-mno-shared} option
|
|
tells gas to generate code which uses the calling convention, but can
|
|
not go into a shared library. The resulting code is slightly more
|
|
efficient. This option only affects the handling of the
|
|
@samp{.cpload} and @samp{.cpsetup} pseudo-ops.
|
|
@end table
|
|
|
|
@node MIPS Macros
|
|
@section High-level assembly macros
|
|
|
|
MIPS assemblers have traditionally provided a wider range of
|
|
instructions than the MIPS architecture itself. These extra
|
|
instructions are usually referred to as ``macro'' instructions
|
|
@footnote{The term ``macro'' is somewhat overloaded here, since
|
|
these macros have no relation to those defined by @code{.macro},
|
|
@pxref{Macro,, @code{.macro}}.}.
|
|
|
|
Some MIPS macro instructions extend an underlying architectural instruction
|
|
while others are entirely new. An example of the former type is @code{and},
|
|
which allows the third operand to be either a register or an arbitrary
|
|
immediate value. Examples of the latter type include @code{bgt}, which
|
|
branches to the third operand when the first operand is greater than
|
|
the second operand, and @code{ulh}, which implements an unaligned
|
|
2-byte load.
|
|
|
|
One of the most common extensions provided by macros is to expand
|
|
memory offsets to the full address range (32 or 64 bits) and to allow
|
|
symbolic offsets such as @samp{my_data + 4} to be used in place of
|
|
integer constants. For example, the architectural instruction
|
|
@code{lbu} allows only a signed 16-bit offset, whereas the macro
|
|
@code{lbu} allows code such as @samp{lbu $4,array+32769($5)}.
|
|
The implementation of these symbolic offsets depends on several factors,
|
|
such as whether the assembler is generating SVR4-style PIC (selected by
|
|
@option{-KPIC}, @pxref{MIPS Options,, Assembler options}), the size of symbols
|
|
(@pxref{MIPS Symbol Sizes,, Directives to override the size of symbols}),
|
|
and the small data limit (@pxref{MIPS Small Data,, Controlling the use
|
|
of small data accesses}).
|
|
|
|
@kindex @code{.set macro}
|
|
@kindex @code{.set nomacro}
|
|
Sometimes it is undesirable to have one assembly instruction expand
|
|
to several machine instructions. The directive @code{.set nomacro}
|
|
tells the assembler to warn when this happens. @code{.set macro}
|
|
restores the default behavior.
|
|
|
|
@cindex @code{at} register, MIPS
|
|
@kindex @code{.set at=@var{reg}}
|
|
Some macro instructions need a temporary register to store intermediate
|
|
results. This register is usually @code{$1}, also known as @code{$at},
|
|
but it can be changed to any core register @var{reg} using
|
|
@code{.set at=@var{reg}}. Note that @code{$at} always refers
|
|
to @code{$1} regardless of which register is being used as the
|
|
temporary register.
|
|
|
|
@kindex @code{.set at}
|
|
@kindex @code{.set noat}
|
|
Implicit uses of the temporary register in macros could interfere with
|
|
explicit uses in the assembly code. The assembler therefore warns
|
|
whenever it sees an explicit use of the temporary register. The directive
|
|
@code{.set noat} silences this warning while @code{.set at} restores
|
|
the default behavior. It is safe to use @code{.set noat} while
|
|
@code{.set nomacro} is in effect since single-instruction macros
|
|
never need a temporary register.
|
|
|
|
Note that while the @sc{gnu} assembler provides these macros for compatibility,
|
|
it does not make any attempt to optimize them with the surrounding code.
|
|
|
|
@node MIPS Symbol Sizes
|
|
@section Directives to override the size of symbols
|
|
|
|
@kindex @code{.set sym32}
|
|
@kindex @code{.set nosym32}
|
|
The n64 ABI allows symbols to have any 64-bit value. Although this
|
|
provides a great deal of flexibility, it means that some macros have
|
|
much longer expansions than their 32-bit counterparts. For example,
|
|
the non-PIC expansion of @samp{dla $4,sym} is usually:
|
|
|
|
@smallexample
|
|
lui $4,%highest(sym)
|
|
lui $1,%hi(sym)
|
|
daddiu $4,$4,%higher(sym)
|
|
daddiu $1,$1,%lo(sym)
|
|
dsll32 $4,$4,0
|
|
daddu $4,$4,$1
|
|
@end smallexample
|
|
|
|
whereas the 32-bit expansion is simply:
|
|
|
|
@smallexample
|
|
lui $4,%hi(sym)
|
|
daddiu $4,$4,%lo(sym)
|
|
@end smallexample
|
|
|
|
n64 code is sometimes constructed in such a way that all symbolic
|
|
constants are known to have 32-bit values, and in such cases, it's
|
|
preferable to use the 32-bit expansion instead of the 64-bit
|
|
expansion.
|
|
|
|
You can use the @code{.set sym32} directive to tell the assembler
|
|
that, from this point on, all expressions of the form
|
|
@samp{@var{symbol}} or @samp{@var{symbol} + @var{offset}}
|
|
have 32-bit values. For example:
|
|
|
|
@smallexample
|
|
.set sym32
|
|
dla $4,sym
|
|
lw $4,sym+16
|
|
sw $4,sym+0x8000($4)
|
|
@end smallexample
|
|
|
|
will cause the assembler to treat @samp{sym}, @code{sym+16} and
|
|
@code{sym+0x8000} as 32-bit values. The handling of non-symbolic
|
|
addresses is not affected.
|
|
|
|
The directive @code{.set nosym32} ends a @code{.set sym32} block and
|
|
reverts to the normal behavior. It is also possible to change the
|
|
symbol size using the command-line options @option{-msym32} and
|
|
@option{-mno-sym32}.
|
|
|
|
These options and directives are always accepted, but at present,
|
|
they have no effect for anything other than n64.
|
|
|
|
@node MIPS Small Data
|
|
@section Controlling the use of small data accesses
|
|
|
|
@c This section deliberately glosses over the possibility of using -G
|
|
@c in SVR4-style PIC, as could be done on IRIX. We don't support that.
|
|
@cindex small data, MIPS
|
|
@cindex @code{gp} register, MIPS
|
|
It often takes several instructions to load the address of a symbol.
|
|
For example, when @samp{addr} is a 32-bit symbol, the non-PIC expansion
|
|
of @samp{dla $4,addr} is usually:
|
|
|
|
@smallexample
|
|
lui $4,%hi(addr)
|
|
daddiu $4,$4,%lo(addr)
|
|
@end smallexample
|
|
|
|
The sequence is much longer when @samp{addr} is a 64-bit symbol.
|
|
@xref{MIPS Symbol Sizes,, Directives to override the size of symbols}.
|
|
|
|
In order to cut down on this overhead, most embedded MIPS systems
|
|
set aside a 64-kilobyte ``small data'' area and guarantee that all
|
|
data of size @var{n} and smaller will be placed in that area.
|
|
The limit @var{n} is passed to both the assembler and the linker
|
|
using the command-line option @option{-G @var{n}}, @pxref{MIPS Options,,
|
|
Assembler options}. Note that the same value of @var{n} must be used
|
|
when linking and when assembling all input files to the link; any
|
|
inconsistency could cause a relocation overflow error.
|
|
|
|
The size of an object in the @code{.bss} section is set by the
|
|
@code{.comm} or @code{.lcomm} directive that defines it. The size of
|
|
an external object may be set with the @code{.extern} directive. For
|
|
example, @samp{.extern sym,4} declares that the object at @code{sym}
|
|
is 4 bytes in length, while leaving @code{sym} otherwise undefined.
|
|
|
|
When no @option{-G} option is given, the default limit is 8 bytes.
|
|
The option @option{-G 0} prevents any data from being automatically
|
|
classified as small.
|
|
|
|
It is also possible to mark specific objects as small by putting them
|
|
in the special sections @code{.sdata} and @code{.sbss}, which are
|
|
``small'' counterparts of @code{.data} and @code{.bss} respectively.
|
|
The toolchain will treat such data as small regardless of the
|
|
@option{-G} setting.
|
|
|
|
On startup, systems that support a small data area are expected to
|
|
initialize register @code{$28}, also known as @code{$gp}, in such a
|
|
way that small data can be accessed using a 16-bit offset from that
|
|
register. For example, when @samp{addr} is small data,
|
|
the @samp{dla $4,addr} instruction above is equivalent to:
|
|
|
|
@smallexample
|
|
daddiu $4,$28,%gp_rel(addr)
|
|
@end smallexample
|
|
|
|
Small data is not supported for SVR4-style PIC.
|
|
|
|
@node MIPS ISA
|
|
@section Directives to override the ISA level
|
|
|
|
@cindex MIPS ISA override
|
|
@kindex @code{.set mips@var{n}}
|
|
@sc{gnu} @code{@value{AS}} supports an additional directive to change
|
|
the MIPS Instruction Set Architecture level on the fly: @code{.set
|
|
mips@var{n}}. @var{n} should be a number from 0 to 5, or 32, 32r2, 64
|
|
or 64r2.
|
|
The values other than 0 make the assembler accept instructions
|
|
for the corresponding ISA level, from that point on in the
|
|
assembly. @code{.set mips@var{n}} affects not only which instructions
|
|
are permitted, but also how certain macros are expanded. @code{.set
|
|
mips0} restores the ISA level to its original level: either the
|
|
level you selected with command line options, or the default for your
|
|
configuration. You can use this feature to permit specific MIPS III
|
|
instructions while assembling in 32 bit mode. Use this directive with
|
|
care!
|
|
|
|
@cindex MIPS CPU override
|
|
@kindex @code{.set arch=@var{cpu}}
|
|
The @code{.set arch=@var{cpu}} directive provides even finer control.
|
|
It changes the effective CPU target and allows the assembler to use
|
|
instructions specific to a particular CPU. All CPUs supported by the
|
|
@samp{-march} command line option are also selectable by this directive.
|
|
The original value is restored by @code{.set arch=default}.
|
|
|
|
The directive @code{.set mips16} puts the assembler into MIPS 16 mode,
|
|
in which it will assemble instructions for the MIPS 16 processor. Use
|
|
@code{.set nomips16} to return to normal 32 bit mode.
|
|
|
|
Traditional MIPS assemblers do not support this directive.
|
|
|
|
The directive @code{.set micromips} puts the assembler into microMIPS mode,
|
|
in which it will assemble instructions for the microMIPS processor. Use
|
|
@code{.set nomicromips} to return to normal 32 bit mode.
|
|
|
|
Traditional MIPS assemblers do not support this directive.
|
|
|
|
@node MIPS assembly options
|
|
@section Directives to control code generation
|
|
|
|
@cindex MIPS 32-bit microMIPS instruction generation override
|
|
@kindex @code{.set insn32}
|
|
@kindex @code{.set noinsn32}
|
|
The directive @code{.set insn32} makes the assembler only use 32-bit
|
|
instruction encodings when generating code for the microMIPS processor.
|
|
This directive inhibits the use of any 16-bit instructions from that
|
|
point on in the assembly. The @code{.set noinsn32} directive allows
|
|
16-bit instructions to be accepted.
|
|
|
|
Traditional MIPS assemblers do not support this directive.
|
|
|
|
@node MIPS autoextend
|
|
@section Directives for extending MIPS 16 bit instructions
|
|
|
|
@kindex @code{.set autoextend}
|
|
@kindex @code{.set noautoextend}
|
|
By default, MIPS 16 instructions are automatically extended to 32 bits
|
|
when necessary. The directive @code{.set noautoextend} will turn this
|
|
off. When @code{.set noautoextend} is in effect, any 32 bit instruction
|
|
must be explicitly extended with the @code{.e} modifier (e.g.,
|
|
@code{li.e $4,1000}). The directive @code{.set autoextend} may be used
|
|
to once again automatically extend instructions when necessary.
|
|
|
|
This directive is only meaningful when in MIPS 16 mode. Traditional
|
|
MIPS assemblers do not support this directive.
|
|
|
|
@node MIPS insn
|
|
@section Directive to mark data as an instruction
|
|
|
|
@kindex @code{.insn}
|
|
The @code{.insn} directive tells @code{@value{AS}} that the following
|
|
data is actually instructions. This makes a difference in MIPS 16 and
|
|
microMIPS modes: when loading the address of a label which precedes
|
|
instructions, @code{@value{AS}} automatically adds 1 to the value, so
|
|
that jumping to the loaded address will do the right thing.
|
|
|
|
@kindex @code{.global}
|
|
The @code{.global} and @code{.globl} directives supported by
|
|
@code{@value{AS}} will by default mark the symbol as pointing to a
|
|
region of data not code. This means that, for example, any
|
|
instructions following such a symbol will not be disassembled by
|
|
@code{objdump} as it will regard them as data. To change this
|
|
behaviour an optional section name can be placed after the symbol name
|
|
in the @code{.global} directive. If this section exists and is known
|
|
to be a code section, then the symbol will be marked as poiting at
|
|
code not data. Ie the syntax for the directive is:
|
|
|
|
@code{.global @var{symbol}[ @var{section}][, @var{symbol}[ @var{section}]] ...},
|
|
|
|
Here is a short example:
|
|
|
|
@example
|
|
.global foo .text, bar, baz .data
|
|
foo:
|
|
nop
|
|
bar:
|
|
.word 0x0
|
|
baz:
|
|
.word 0x1
|
|
|
|
@end example
|
|
|
|
@node MIPS NaN Encodings
|
|
@section Directives to record which NaN encoding is being used
|
|
|
|
@cindex MIPS IEEE 754 NaN data encoding selection
|
|
@cindex @code{.nan} directive, MIPS
|
|
The IEEE 754 floating-point standard defines two types of not-a-number
|
|
(NaN) data: ``signalling'' NaNs and ``quiet'' NaNs. The original version
|
|
of the standard did not specify how these two types should be
|
|
distinguished. Most implementations followed the i387 model, in which
|
|
the first bit of the significand is set for quiet NaNs and clear for
|
|
signalling NaNs. However, the original MIPS implementation assigned the
|
|
opposite meaning to the bit, so that it was set for signalling NaNs and
|
|
clear for quiet NaNs.
|
|
|
|
The 2008 revision of the standard formally suggested the i387 choice
|
|
and as from Sep 2012 the current release of the MIPS architecture
|
|
therefore optionally supports that form. Code that uses one NaN encoding
|
|
would usually be incompatible with code that uses the other NaN encoding,
|
|
so MIPS ELF objects have a flag (@code{EF_MIPS_NAN2008}) to record which
|
|
encoding is being used.
|
|
|
|
Assembly files can use the @code{.nan} directive to select between the
|
|
two encodings. @samp{.nan 2008} says that the assembly file uses the
|
|
IEEE 754-2008 encoding while @samp{.nan legacy} says that the file uses
|
|
the original MIPS encoding. If several @code{.nan} directives are given,
|
|
the final setting is the one that is used.
|
|
|
|
The command-line options @option{-mnan=legacy} and @option{-mnan=2008}
|
|
can be used instead of @samp{.nan legacy} and @samp{.nan 2008}
|
|
respectively. However, any @code{.nan} directive overrides the
|
|
command-line setting.
|
|
|
|
@samp{.nan legacy} is the default if no @code{.nan} directive or
|
|
@option{-mnan} option is given.
|
|
|
|
Note that @sc{gnu} @code{@value{AS}} does not produce NaNs itself and
|
|
therefore these directives do not affect code generation. They simply
|
|
control the setting of the @code{EF_MIPS_NAN2008} flag.
|
|
|
|
Traditional MIPS assemblers do not support these directives.
|
|
|
|
@node MIPS Option Stack
|
|
@section Directives to save and restore options
|
|
|
|
@cindex MIPS option stack
|
|
@kindex @code{.set push}
|
|
@kindex @code{.set pop}
|
|
The directives @code{.set push} and @code{.set pop} may be used to save
|
|
and restore the current settings for all the options which are
|
|
controlled by @code{.set}. The @code{.set push} directive saves the
|
|
current settings on a stack. The @code{.set pop} directive pops the
|
|
stack and restores the settings.
|
|
|
|
These directives can be useful inside an macro which must change an
|
|
option such as the ISA level or instruction reordering but does not want
|
|
to change the state of the code which invoked the macro.
|
|
|
|
Traditional MIPS assemblers do not support these directives.
|
|
|
|
@node MIPS ASE Instruction Generation Overrides
|
|
@section Directives to control generation of MIPS ASE instructions
|
|
|
|
@cindex MIPS MIPS-3D instruction generation override
|
|
@kindex @code{.set mips3d}
|
|
@kindex @code{.set nomips3d}
|
|
The directive @code{.set mips3d} makes the assembler accept instructions
|
|
from the MIPS-3D Application Specific Extension from that point on
|
|
in the assembly. The @code{.set nomips3d} directive prevents MIPS-3D
|
|
instructions from being accepted.
|
|
|
|
@cindex SmartMIPS instruction generation override
|
|
@kindex @code{.set smartmips}
|
|
@kindex @code{.set nosmartmips}
|
|
The directive @code{.set smartmips} makes the assembler accept
|
|
instructions from the SmartMIPS Application Specific Extension to the
|
|
MIPS32 ISA from that point on in the assembly. The
|
|
@code{.set nosmartmips} directive prevents SmartMIPS instructions from
|
|
being accepted.
|
|
|
|
@cindex MIPS MDMX instruction generation override
|
|
@kindex @code{.set mdmx}
|
|
@kindex @code{.set nomdmx}
|
|
The directive @code{.set mdmx} makes the assembler accept instructions
|
|
from the MDMX Application Specific Extension from that point on
|
|
in the assembly. The @code{.set nomdmx} directive prevents MDMX
|
|
instructions from being accepted.
|
|
|
|
@cindex MIPS DSP Release 1 instruction generation override
|
|
@kindex @code{.set dsp}
|
|
@kindex @code{.set nodsp}
|
|
The directive @code{.set dsp} makes the assembler accept instructions
|
|
from the DSP Release 1 Application Specific Extension from that point
|
|
on in the assembly. The @code{.set nodsp} directive prevents DSP
|
|
Release 1 instructions from being accepted.
|
|
|
|
@cindex MIPS DSP Release 2 instruction generation override
|
|
@kindex @code{.set dspr2}
|
|
@kindex @code{.set nodspr2}
|
|
The directive @code{.set dspr2} makes the assembler accept instructions
|
|
from the DSP Release 2 Application Specific Extension from that point
|
|
on in the assembly. This dirctive implies @code{.set dsp}. The
|
|
@code{.set nodspr2} directive prevents DSP Release 2 instructions from
|
|
being accepted.
|
|
|
|
@cindex MIPS MT instruction generation override
|
|
@kindex @code{.set mt}
|
|
@kindex @code{.set nomt}
|
|
The directive @code{.set mt} makes the assembler accept instructions
|
|
from the MT Application Specific Extension from that point on
|
|
in the assembly. The @code{.set nomt} directive prevents MT
|
|
instructions from being accepted.
|
|
|
|
@cindex MIPS MCU instruction generation override
|
|
@kindex @code{.set mcu}
|
|
@kindex @code{.set nomcu}
|
|
The directive @code{.set mcu} makes the assembler accept instructions
|
|
from the MCU Application Specific Extension from that point on
|
|
in the assembly. The @code{.set nomcu} directive prevents MCU
|
|
instructions from being accepted.
|
|
|
|
@cindex MIPS SIMD Architecture instruction generation override
|
|
@kindex @code{.set msa}
|
|
@kindex @code{.set nomsa}
|
|
The directive @code{.set msa} makes the assembler accept instructions
|
|
from the MIPS SIMD Architecture Extension from that point on
|
|
in the assembly. The @code{.set nomsa} directive prevents MSA
|
|
instructions from being accepted.
|
|
|
|
@cindex Virtualization instruction generation override
|
|
@kindex @code{.set virt}
|
|
@kindex @code{.set novirt}
|
|
The directive @code{.set virt} makes the assembler accept instructions
|
|
from the Virtualization Application Specific Extension from that point
|
|
on in the assembly. The @code{.set novirt} directive prevents Virtualization
|
|
instructions from being accepted.
|
|
|
|
Traditional MIPS assemblers do not support these directives.
|
|
|
|
@node MIPS Floating-Point
|
|
@section Directives to override floating-point options
|
|
|
|
@cindex Disable floating-point instructions
|
|
@kindex @code{.set softfloat}
|
|
@kindex @code{.set hardfloat}
|
|
The directives @code{.set softfloat} and @code{.set hardfloat} provide
|
|
finer control of disabling and enabling float-point instructions.
|
|
These directives always override the default (that hard-float
|
|
instructions are accepted) or the command-line options
|
|
(@samp{-msoft-float} and @samp{-mhard-float}).
|
|
|
|
@cindex Disable single-precision floating-point operations
|
|
@kindex @code{.set singlefloat}
|
|
@kindex @code{.set doublefloat}
|
|
The directives @code{.set singlefloat} and @code{.set doublefloat}
|
|
provide finer control of disabling and enabling double-precision
|
|
float-point operations. These directives always override the default
|
|
(that double-precision operations are accepted) or the command-line
|
|
options (@samp{-msingle-float} and @samp{-mdouble-float}).
|
|
|
|
Traditional MIPS assemblers do not support these directives.
|
|
|
|
@node MIPS Syntax
|
|
@section Syntactical considerations for the MIPS assembler
|
|
@menu
|
|
* MIPS-Chars:: Special Characters
|
|
@end menu
|
|
|
|
@node MIPS-Chars
|
|
@subsection Special Characters
|
|
|
|
@cindex line comment character, MIPS
|
|
@cindex MIPS line comment character
|
|
The presence of a @samp{#} on a line indicates the start of a comment
|
|
that extends to the end of the current line.
|
|
|
|
If a @samp{#} appears as the first character of a line, the whole line
|
|
is treated as a comment, but in this case the line can also be a
|
|
logical line number directive (@pxref{Comments}) or a
|
|
preprocessor control command (@pxref{Preprocessing}).
|
|
|
|
@cindex line separator, MIPS
|
|
@cindex statement separator, MIPS
|
|
@cindex MIPS line separator
|
|
The @samp{;} character can be used to separate statements on the same
|
|
line.
|