binutils-gdb/gdb/testsuite/gdb.base/annota3.exp

397 lines
10 KiB
Plaintext

# Copyright 2003-2018 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# This file was written by Elena Zannoni (ezannoni@cygnus.com)
# This testcase cannot use runto_main because of the different prompt
# we get when using annotation level 2.
#
if ![target_can_use_run_cmd] {
return 0
}
#
# test running programs
#
standard_testfile .c
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug nowarnings}] != "" } {
untested "failed to compile"
return -1
}
clean_restart ${binfile}
# The commands we test here produce many lines of output; disable "press
# <return> to continue" prompts.
gdb_test_no_output "set height 0"
#
# break in main
#
set main_line [gdb_get_line_number "break main"]
gdb_test "break ${srcfile}:${main_line}" \
"Breakpoint.*at.* file .*$srcfile, line $main_line\\." \
"breakpoint main"
# NOTE: this prompt is OK only when the annotation level is > 1
# NOTE: When this prompt is in use the gdb_test procedure cannot be
# used because it assumes that the last char after the gdb_prompt is a
# white space. This is not true with this annotated prompt. So we must
# use send_gdb and gdb_expect or gdb_expect_list.
set old_gdb_prompt $gdb_prompt
set gdb_prompt "\r\n\032\032pre-prompt\r\n$gdb_prompt \r\n\032\032prompt\r\n"
#
# set the annotation level to 3
#
# of course, this will test:
# annotate-pre-prompt
# annotate-prompt
# annotate-post-prompt (in the next block)
#
send_gdb "set annotate 3\n"
gdb_expect_list "annotation set at level 3" "\r\n$gdb_prompt$" {
"set annotate 3"
}
#
# if construct:
#
gdb_test_multiple "if 1" "start if construct" {
-re "^if 1\r\n\r\n\032\032post-prompt\r\n\r\n\032\032pre-commands\r\n >\r\n\032\032commands\r\n$" {
pass "start if construct"
}
}
gdb_test_multiple "end" "end if construct" {
-re "^end\r\n\r\n\032\032post-commands\r\n$gdb_prompt$" {
pass "end if construct"
}
}
#
# info break:
#
send_gdb "info break\n"
gdb_expect_list "breakpoint info" "$gdb_prompt$" [concat {
"\r\n\032\032post-prompt\r\n"
"Num Type Disp Enb Address +What\r\n" } [list \
"1 breakpoint keep y 0x\[0-9a-zA-Z\]+ +in main at .*annota3.c:$main_line\r\n"]]
#
# run to a break point will test:
#
#exp_internal 1
send_gdb "run\n"
gdb_expect_list "run until main breakpoint" "$gdb_prompt$" [concat {
"\r\n\032\032post-prompt\r\n"
"Starting program: .*annota3(|\.exe) \r\n"
"\r\n\032\032starting\r\n"
"\r\n\032\032breakpoint 1\r\n"
"\r\n"
"Breakpoint 1, "
"\r\n\032\032frame-begin 0 0x\[0-9a-z\]+\r\n" } [list \
"main \\(\\) at .*annota3.c:$main_line\r\n"] [list \
"\r\n\032\032source.*annota3.c:$main_line:.*:beg:0x\[0-9a-z\]+\r\n"] {
"\r\n\032\032stopped\r\n"
}]
#exp_internal 0
#exit 0
#
# Let's do a next, to get to a point where the array is initialized
# We don't care about the annotated output for this operation, it is the same as
# the one produced by run above
#
send_gdb "next\n"
gdb_expect_list "go after array init line" "$gdb_prompt$" {
"\r\n\032\032post-prompt\r\n"
"\r\n\032\032starting\r\n"
"\r\n\032\032source .*annota3.c:\[0-9\]+:\[0-9\]+:beg:0x\[0-9a-z\]+\r\n"
"\r\n\032\032stopped\r\n"
}
#
# printing the array:
#
send_gdb "print my_array\n"
gdb_expect_list "print array" "$gdb_prompt$" {
"\r\n\032\032post-prompt\r\n"
".*= .1, 2, 3.\r\n"
}
#
# this should generate an error message, so to test:
# annotate-error-begin
# FIXME: annotate-error not tested
#
#exp_internal 1
send_gdb "print non_existent_value\n"
gdb_expect_list "print non_existent_value" "$gdb_prompt$" {
"\r\n\032\032post-prompt\r\n"
"\r\n\032\032error-begin\r\n"
"No symbol \"non_existent_value\" in current context.\r\n"
"\r\n\032\032error\r\n"
}
#
# break at signal handler
#
send_gdb "break handle_USR1\n"
gdb_expect_list "breakpoint handle_USR1" "$gdb_prompt$" {
"\r\n\032\032post-prompt\r\n"
"Breakpoint.*at 0x\[0-9a-z\]+: file.*annota3.c, line.*\r\n"
}
#
# break at printf. When we are stopped at printf, we can test
#
send_gdb "break printf\n"
gdb_expect_list "breakpoint printf" "$gdb_prompt$" {
"\r\n\032\032post-prompt\r\n"
"Breakpoint.*at 0x\[0-9a-z\]+.*"
}
#
# get to printf
#
send_gdb "continue\n"
gdb_expect_list "continue to printf" "$gdb_prompt$" {
"\r\n\032\032post-prompt\r\n"
"Continuing.\r\n"
"\r\n\032\032starting\r\n"
"\r\n\032\032breakpoint 3\r\n"
"\r\n"
"Breakpoint 3, \[^\r\n\]*\r\n"
"\r\n\032\032stopped\r\n"
}
send_gdb "backtrace\n"
gdb_expect_list "backtrace from shlibrary" "$gdb_prompt$" {
"\r\n\032\032post-prompt\r\n"
"#0 .* .*printf(@\[^ ]*)? \[^\r\n\]*\r\n"
"#1 .* main \[^\r\n\]*\r\n"
}
#
# test printing a frame with some arguments:
#
if [target_info exists gdb,nosignals] {
unsupported "send SIGUSR1"
unsupported "backtrace @ signal handler"
} else {
send_gdb "signal SIGUSR1\n"
gdb_expect_list "send SIGUSR1" "$gdb_prompt$" {
"\r\n\032\032post-prompt\r\n"
"Continuing with signal SIGUSR1.\r\n"
"\r\n\032\032starting\r\n"
"\r\n\032\032breakpoint 2\r\n"
"\r\n"
"Breakpoint 2, "
"\r\n\032\032frame-begin 0 0x\[0-9a-z\]+\r\n"
"handle_USR1 \\(sig=\[0-9\]+\\) at .*annota3.c:\[0-9\]+\r\n"
"\r\n\032\032source .*annota3.c:\[0-9\]+:\[0-9\]+:beg:0x\[0-9a-z\]+\r\n"
"\r\n\032\032stopped\r\n"
}
#
# test:
#
send_gdb "backtrace\n"
gdb_expect_list "backtrace @ signal handler" "$gdb_prompt$" {
"#0 +handle_USR1 \[^\r\n\]+\r\n"
"#1 +.signal handler called.\r\n"
"#2 .* .*printf(@\[^ \]*)? \[^\r\n\]+\r\n"
"#3 .* main \[^\r\n\]+\r\n"
}
}
#
# delete all the breakpoints
#
send_gdb "delete 1\n"
gdb_expect_list "delete bp 1" "$gdb_prompt$" {
"\r\n\032\032post-prompt\r\n"
}
send_gdb "delete 2\n"
gdb_expect_list "delete bp 2" "$gdb_prompt$" {
"\r\n\032\032post-prompt\r\n"
}
send_gdb "delete 3\n"
gdb_expect_list "delete bp 3" "$gdb_prompt$" {
"\r\n\032\032post-prompt\r\n"
}
#
# break in main, after value is initialized. This is in preparation
# to test the annotate output for the display command.
#
send_gdb "break ${srcfile}:${main_line}\n"
gdb_expect_list "break in main" "$gdb_prompt$" [concat {
"\r\n\032\032post-prompt\r\n" } [list \
"Breakpoint 4 at 0x\[0-9a-z\]+: file .*annota3.c, line $main_line.\r\n"]]
#
# display the value
#
send_gdb "display value\n"
gdb_expect_list "set up display" "$gdb_prompt$" {
"\r\n\032\032post-prompt\r\n"
"1: value = 7\r\n"
}
# should ask query. Test annotate-query.
# we don't care about anything else here, only the query.
send_gdb "run\n"
gdb_expect {
-re "pre-query.*already.*\\(y or n\\).*query\r\n" {
send_gdb "y\n"
gdb_expect {
-re ".*post-query.*$gdb_prompt$" \
{ pass "re-run" }
-re ".*$gdb_prompt$" { fail "re-run" }
timeout { fail "re-run (timeout)" }
}
}
-re ".*$gdb_prompt$" { fail "re-run" }
timeout { fail "re-run (timeout)" }
}
#
# Test that breakpoints-invalid is issued once and only once for
# breakpoint ignore count changes, after annotation stopped.
# NOTE: breakpoints-invalid annotations have been removed from
# level 3 but keep these tests for continuity and comparison
# with annota1.exp.
set value_inc_line [gdb_get_line_number "increment value"]
send_gdb "break $value_inc_line\n"
gdb_expect_list "break at value++" "$gdb_prompt$" [concat {
"\r\n\032\032post-prompt\r\n" } [list \
"Breakpoint 5 at 0x\[0-9a-z\]+: file .*annota3.c, line $value_inc_line.\r\n"]]
send_gdb "ignore 5 4\n"
gdb_expect_list "ignore 5 4" "$gdb_prompt$" {
"\r\n\032\032post-prompt\r\n"
"Will ignore next 4 crossings of breakpoint 5"
"\r\n"
}
send_gdb "continue\n"
gdb_expect_list "annotate ignore count change" "$gdb_prompt$" [concat {
"\r\n\032\032post-prompt\r\n"
"\r\n\032\032breakpoint 5\r\n"
"\r\n"
"Breakpoint 5, "
"\r\n\032\032frame-begin 0 0x\[0-9a-z\]+\r\n" } [list \
"main \\(\\) at .*annota3.c:$value_inc_line\r\n"] [list \
"\r\n\032\032source .*annota3.c:$value_inc_line:\[0-9\]+:beg:0x\[0-9a-z\]+\r\n"] {
"1: value = 11\r\n"
"\r\n\032\032stopped\r\n"
}]
# check that ignore command is working, or the above can provide
# misleading assurance ...
send_gdb "next\n"
gdb_expect_list "next to exit loop" "$gdb_prompt$" {
"\r\n\032\032post-prompt\r\n"
"\r\n\032\032starting\r\n"
"\r\n\032\032source.*annota3.c:\[0-9\]+:\[0-9\]+:beg:0x\[0-9a-z\]+\r\n"
"1: value = 12\r\n"
"\r\n\032\032stopped\r\n"
}
set after_loop_line [gdb_get_line_number "after loop"]
send_gdb "next\n"
gdb_expect_list "breakpoint ignore count" "$gdb_prompt$" [concat {
"\r\n\032\032post-prompt\r\n"
"\r\n\032\032starting\r\n" } [list \
"\r\n\032\032source.*annota3.c:$after_loop_line:\[0-9\]+:beg:0x\[0-9a-z\]+\r\n"] {
"1: value = 12\r\n"
"\r\n\032\032stopped\r\n"
}]
# Get the inferior's PID for later.
set test "get inferior pid"
set pid -1
gdb_test_multiple "info inferior 1" "$test" {
-re "process (\[0-9\]*).*$gdb_prompt$" {
set pid $expect_out(1,string)
pass "$test"
}
}
# Send a signal that is not handled
if [target_info exists gdb,nosignals] {
unsupported "signal sent"
} else {
send_gdb "signal SIGTRAP\n"
gdb_expect_list "signal sent" "$gdb_prompt$" {
"\r\n\032\032post-prompt\r\n"
"Continuing with signal SIGTRAP.\r\n"
"\r\n\032\032starting\r\n"
"\r\n\032\032signalled\r\n"
"\r\nProgram terminated with signal SIGTRAP, Trace.breakpoint trap.\r\n"
"The program no longer exists.\r\n"
"\r\n\032\032stopped\r\n"
}
}
# Check for production of a core file and remove it!
set test "cleanup core file"
if { [remote_file host exists core] } {
remote_file host delete core
pass "$test (removed)"
} elseif { $pid != -1 && [remote_file host exists core.$pid] } {
remote_file host delete core.$pid
pass "$test (removed)"
} else {
pass "$test (not dumped)"
}
# restore the original prompt for the rest of the testsuite
set gdb_prompt $old_gdb_prompt