binutils-gdb/gdb/i386fbsd-nat.c

198 lines
5.8 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* Native-dependent code for FreeBSD/i386.
Copyright (C) 2001-2016 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
#include "inferior.h"
#include "regcache.h"
#include "target.h"
#include <sys/types.h>
#include <sys/ptrace.h>
#include <sys/sysctl.h>
#include <sys/user.h>
#include "fbsd-nat.h"
#include "i386-tdep.h"
#include "x86-nat.h"
#include "x86bsd-nat.h"
#include "i386bsd-nat.h"
/* Resume execution of the inferior process. If STEP is nonzero,
single-step it. If SIGNAL is nonzero, give it that signal. */
static void
i386fbsd_resume (struct target_ops *ops,
ptid_t ptid, int step, enum gdb_signal signal)
{
pid_t pid = ptid_get_pid (ptid);
int request = PT_STEP;
if (pid == -1)
/* Resume all threads. This only gets used in the non-threaded
case, where "resume all threads" and "resume inferior_ptid" are
the same. */
pid = ptid_get_pid (inferior_ptid);
if (!step)
{
struct regcache *regcache = get_current_regcache ();
ULONGEST eflags;
/* Workaround for a bug in FreeBSD. Make sure that the trace
flag is off when doing a continue. There is a code path
through the kernel which leaves the flag set when it should
have been cleared. If a process has a signal pending (such
as SIGALRM) and we do a PT_STEP, the process never really has
a chance to run because the kernel needs to notify the
debugger that a signal is being sent. Therefore, the process
never goes through the kernel's trap() function which would
normally clear it. */
regcache_cooked_read_unsigned (regcache, I386_EFLAGS_REGNUM,
&eflags);
if (eflags & 0x0100)
regcache_cooked_write_unsigned (regcache, I386_EFLAGS_REGNUM,
eflags & ~0x0100);
request = PT_CONTINUE;
}
/* An addres of (caddr_t) 1 tells ptrace to continue from where it
was. (If GDB wanted it to start some other way, we have already
written a new PC value to the child.) */
if (ptrace (request, pid, (caddr_t) 1,
gdb_signal_to_host (signal)) == -1)
perror_with_name (("ptrace"));
}
/* Support for debugging kernel virtual memory images. */
#include <machine/pcb.h>
#include "bsd-kvm.h"
static int
i386fbsd_supply_pcb (struct regcache *regcache, struct pcb *pcb)
{
/* The following is true for FreeBSD 4.7:
The pcb contains %eip, %ebx, %esp, %ebp, %esi, %edi and %gs.
This accounts for all callee-saved registers specified by the
psABI and then some. Here %esp contains the stack pointer at the
point just after the call to cpu_switch(). From this information
we reconstruct the register state as it would look when we just
returned from cpu_switch(). */
/* The stack pointer shouldn't be zero. */
if (pcb->pcb_esp == 0)
return 0;
pcb->pcb_esp += 4;
regcache_raw_supply (regcache, I386_EDI_REGNUM, &pcb->pcb_edi);
regcache_raw_supply (regcache, I386_ESI_REGNUM, &pcb->pcb_esi);
regcache_raw_supply (regcache, I386_EBP_REGNUM, &pcb->pcb_ebp);
regcache_raw_supply (regcache, I386_ESP_REGNUM, &pcb->pcb_esp);
regcache_raw_supply (regcache, I386_EBX_REGNUM, &pcb->pcb_ebx);
regcache_raw_supply (regcache, I386_EIP_REGNUM, &pcb->pcb_eip);
regcache_raw_supply (regcache, I386_GS_REGNUM, &pcb->pcb_gs);
return 1;
}
#ifdef PT_GETXSTATE_INFO
/* Implement the to_read_description method. */
static const struct target_desc *
i386fbsd_read_description (struct target_ops *ops)
{
static int xsave_probed;
static uint64_t xcr0;
if (!xsave_probed)
{
struct ptrace_xstate_info info;
if (ptrace (PT_GETXSTATE_INFO, ptid_get_pid (inferior_ptid),
(PTRACE_TYPE_ARG3) &info, sizeof (info)) == 0)
{
x86bsd_xsave_len = info.xsave_len;
xcr0 = info.xsave_mask;
}
xsave_probed = 1;
}
if (x86bsd_xsave_len != 0)
{
return i386_target_description (xcr0);
}
else
return tdesc_i386;
}
#endif
/* Prevent warning from -Wmissing-prototypes. */
void _initialize_i386fbsd_nat (void);
void
_initialize_i386fbsd_nat (void)
{
struct target_ops *t;
/* Add some extra features to the common *BSD/i386 target. */
t = i386bsd_target ();
#ifdef PT_GETXSTATE_INFO
t->to_read_description = i386fbsd_read_description;
#endif
t->to_resume = i386fbsd_resume;
fbsd_nat_add_target (t);
/* Support debugging kernel virtual memory images. */
bsd_kvm_add_target (i386fbsd_supply_pcb);
#ifdef KERN_PROC_SIGTRAMP
/* Normally signal frames are detected via i386fbsd_sigtramp_p.
However, FreeBSD 9.2 through 10.1 do not include the page holding
the signal code in core dumps. These releases do provide a
kern.proc.sigtramp.<pid> sysctl that returns the location of the
signal trampoline for a running process. We fetch the location
of the current (gdb) process and use this to identify signal
frames in core dumps from these releases. */
{
int mib[4];
struct kinfo_sigtramp kst;
size_t len;
mib[0] = CTL_KERN;
mib[1] = KERN_PROC;
mib[2] = KERN_PROC_SIGTRAMP;
mib[3] = getpid ();
len = sizeof (kst);
if (sysctl (mib, 4, &kst, &len, NULL, 0) == 0)
{
i386fbsd_sigtramp_start_addr = (uintptr_t) kst.ksigtramp_start;
i386fbsd_sigtramp_end_addr = (uintptr_t) kst.ksigtramp_end;
}
}
#endif
}