73ab01a07d
When we have multiple consoles, MI channels, etc., then we need to broadcast breakpoint hits, etc. to all UIs. In the past, I've adjusted most of the run control to communicate events to the interpreters through observer notifications, so events would be properly sent to console and MI streams, in sync and async modes. This patch does the next logical step -- have each interpreter's observers output interpreter-specific info to _all_ UIs. Note that when we have multiple instances of active cli/tui interpreters, then the cli_interp and tui_interp globals no longer work. This is addressed by this patch. Also, the interpreters currently register some observers when resumed and remove them when suspended. If we have multiple instances of the interpreters, and they can be suspended/resumed at different, independent times, that no longer works. What we instead do is always install the observers, and then have the observers themselves know when to do nothing. An earlier prototype of this series did the looping over struct UIs in common code, and then dispatched events to the interpreters through a matching interp_on_foo method for each observer. That turned out a lot more complicated than the present solution, as we'd end up with having to create a new interp method every time some interpreter wanted to listen to some observer notification, resulting in a lot of duplicated make-work and more coupling than desirable. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * cli/cli-interp.c (cli_interp): Delete. (as_cli_interp): New function. (cli_on_normal_stop, cli_on_signal_received) (cli_on_end_stepping_range, cli_on_signal_exited, cli_on_exited) (cli_on_no_history): Send output to all CLI UIs. (cli_on_sync_execution_done, cli_on_command_error): Skip output if the top level interpreter is not a CLI. (cli_interpreter_init): Don't set cli_interp or install observers here. (_initialize_cli_interp): Install observers here. * event-top.c (main_ui_, ui_list): New globals. (current_ui): Point to main_ui_. (restore_ui_cleanup, switch_thru_all_uis_init) (switch_thru_all_uis_cond, switch_thru_all_uis_next): New functions. * mi/mi-interp.c (as_mi_interp): New function. (mi_interpreter_init): Don't install observers here. (mi_on_sync_execution_done): Skip output if the top level interpreter is not a MI. (mi_new_thread, mi_thread_exit, mi_record_changed) (mi_inferior_added, mi_inferior_appeared, mi_inferior_exit) (mi_inferior_removed): Send output to all MI UIs. (find_mi_interpreter, mi_interp_data): Delete. (find_mi_interp): New function. (mi_on_signal_received, mi_on_end_stepping_range) (mi_on_signal_exited, mi_on_exited, mi_on_no_history): Send output to all MI UIs. (mi_on_normal_stop): Rename to ... (mi_on_normal_stop_1): ... this. (mi_on_normal_stop): Reimplement, sending output to all MI UIs. (mi_traceframe_changed, mi_tsv_created, mi_tsv_deleted) (mi_tsv_modified, mi_breakpoint_created, mi_breakpoint_deleted) (mi_breakpoint_modified, mi_output_running_pid): Send output to all MI UIs. (mi_on_resume): Rename to ... (mi_on_resume_1): ... this. Don't handle infcalls here. (mi_on_resume): Reimplement, sending output to all MI UIs. (mi_solib_loaded, mi_solib_unloaded, mi_command_param_changed) (mi_memory_changed): Send output to all MI UIs. (report_initial_inferior): Install observers here. * top.h (struct ui) <next>: New field. (ui_list): Declare. (struct switch_thru_all_uis): New. (switch_thru_all_uis_init, switch_thru_all_uis_cond) (switch_thru_all_uis_next): Declare. (SWITCH_THRU_ALL_UIS): New macro. * tui/tui-interp.c (tui_interp): Delete global. (as_tui_interp): New function. (tui_on_normal_stop, tui_on_signal_received) (tui_on_end_stepping_range, tui_on_signal_exited, tui_on_exited) (tui_on_no_history): Send output to all TUI UIs. (tui_on_sync_execution_done, tui_on_command_error): Skip output if the top level interpreter is not a TUI. (tui_init): Don't set tui_interp or install observers here. (_initialize_tui_interp): Install observers here. |
||
|---|---|---|
| bfd | ||
| binutils | ||
| config | ||
| cpu | ||
| elfcpp | ||
| etc | ||
| gas | ||
| gdb | ||
| gold | ||
| gprof | ||
| include | ||
| intl | ||
| ld | ||
| libdecnumber | ||
| libiberty | ||
| opcodes | ||
| readline | ||
| sim | ||
| texinfo | ||
| zlib | ||
| .cvsignore | ||
| .gitattributes | ||
| .gitignore | ||
| COPYING | ||
| COPYING.LIB | ||
| COPYING.LIBGLOSS | ||
| COPYING.NEWLIB | ||
| COPYING3 | ||
| COPYING3.LIB | ||
| ChangeLog | ||
| MAINTAINERS | ||
| Makefile.def | ||
| Makefile.in | ||
| Makefile.tpl | ||
| README | ||
| README-maintainer-mode | ||
| compile | ||
| config-ml.in | ||
| config.guess | ||
| config.rpath | ||
| config.sub | ||
| configure | ||
| configure.ac | ||
| depcomp | ||
| djunpack.bat | ||
| install-sh | ||
| libtool.m4 | ||
| ltgcc.m4 | ||
| ltmain.sh | ||
| ltoptions.m4 | ||
| ltsugar.m4 | ||
| ltversion.m4 | ||
| lt~obsolete.m4 | ||
| makefile.vms | ||
| missing | ||
| mkdep | ||
| mkinstalldirs | ||
| move-if-change | ||
| setup.com | ||
| src-release.sh | ||
| symlink-tree | ||
| ylwrap | ||
README
README for GNU development tools This directory contains various GNU compilers, assemblers, linkers, debuggers, etc., plus their support routines, definitions, and documentation. If you are receiving this as part of a GDB release, see the file gdb/README. If with a binutils release, see binutils/README; if with a libg++ release, see libg++/README, etc. That'll give you info about this package -- supported targets, how to use it, how to report bugs, etc. It is now possible to automatically configure and build a variety of tools with one command. To build all of the tools contained herein, run the ``configure'' script here, e.g.: ./configure make To install them (by default in /usr/local/bin, /usr/local/lib, etc), then do: make install (If the configure script can't determine your type of computer, give it the name as an argument, for instance ``./configure sun4''. You can use the script ``config.sub'' to test whether a name is recognized; if it is, config.sub translates it to a triplet specifying CPU, vendor, and OS.) If you have more than one compiler on your system, it is often best to explicitly set CC in the environment before running configure, and to also set CC when running make. For example (assuming sh/bash/ksh): CC=gcc ./configure make A similar example using csh: setenv CC gcc ./configure make Much of the code and documentation enclosed is copyright by the Free Software Foundation, Inc. See the file COPYING or COPYING.LIB in the various directories, for a description of the GNU General Public License terms under which you can copy the files. REPORTING BUGS: Again, see gdb/README, binutils/README, etc., for info on where and how to report problems.