ae57792d90
DEFAULT_CRIS_ARCH. Handle crisv32-*-linux-gnu* like cris-*-linux-gnu* and crisv32-*-* like cris-*-*. * configure: Regenerate. * config/tc-cris.c (enum cris_archs): New. (cris_mach, cris_arch_from_string, s_cris_arch, get_sup_reg) (cris_insn_ver_valid_for_arch): New functions. (DEFAULT_CRIS_ARCH): New macro, default to cris_any_v0_v10. (cris_arch): New variable. (md_pseudo_table): New pseudo .arch. (err_for_dangerous_mul_placement): Initialize according to DEFAULT_CRIS_ARCH. (STATE_COND_BRANCH): Renamed from STATE_CONDITIONAL_BRANCH. All users changed. (STATE_COND_BRANCH_V32, STATE_COND_BRANCH_COMMON) (STATE_ABS_BRANCH_V32, STATE_LAPC, BRANCH_BF_V32, BRANCH_BB_V32) (BRANCH_WF_V32, BRANCH_WB_V32): New. (BRANCH_BF, BRANCH_BB, BRANCH_WF, BRANCH_WB): Don't undef after use in md_cris_relax_table. (md_cris_relax_table): Add entries for STATE_COND_BRANCH_V32, STATE_COND_BRANCH_COMMON, STATE_ABS_BRANCH_V32, STATE_LAPC. Update and improve head comment. (OPTION_PIC): Define in terms of previous option, OPTION_US. (OPTION_MULBUG_ABORT_ON, OPTION_MULBUG_ABORT_OFF): Similar. (OPTION_ARCH): New. (md_longopts): New option --march=... (cris_any_v0_v10_long_jump_size, crisv32_long_jump_size): New macros. (md_long_jump_size): Initialize in terms of DEFAULT_CRIS_ARCH. (HANDLE_RELAXABLE): New macro. (md_estimate_size_before_relax): Use HANDLE_RELAXABLE for common cases. Check for weak symbols and assume not relaxable. Handle STATE_COND_BRANCH_V32, STATE_COND_BRANCH_COMMON, STATE_ABS_BRANCH_V32, STATE_LAPC. Use new variable symbolP, not fragP->fr_symbol. (md_convert_frag): Handle STATE_COND_BRANCH_V32, STATE_COND_BRANCH_COMMON, STATE_ABS_BRANCH_V32, STATE_LAPC. (cris_create_short_jump): Adjust for CRISv32. (md_create_long_jump): Ditto. Emit error for common_v10_v32. (md_begin): Define symbols "..asm.arch.cris.v32", "..asm.arch.cris.v10", "..asm.arch.cris.common_v10_v32" and "..asm.arch.cris.any_v0_v10". Use cris_insn_ver_valid_for_arch when entering opcode table entry points. (md_assemble): Adjust branch handling for CRISv32. Handle LAPC relaxation. In fix_new_exp call for main insn, pass 1 for pcrel parameter for 8, 16 and 32-bit pc-relative insns and LAPC. (cris_process_instruction): Initialize out_insnp->insn_type to CRIS_INSN_NONE, not CRIS_INSN_NORMAL. <case ']', '[', 'A', 'd', 'Q', 'N', 'n', 'Y', 'U', 'u', 'T'>: New cases. <case 'm'>: Check that modified_char == '.'. <invalid operands>: Consume the rest of the line. When operands don't match, skip over subsequent insns with non-matching version specifier but same mnemonic. <immediate constant, case SIZE_SPEC_REG>: Immediate operands for special registers in CRISv32 are always 32 bit long. <immediate constant, case SIZE_FIELD_SIGNED, SIZE_FIELD_UNSIGNED>: New cases. (get_gen_reg): Only recognize "PC" when followed by "+]" for v32 and compatible. Recognize "ACR" for v32, unless followed by "+". (get_spec_reg): Consider cris_arch when looking up register. (get_autoinc_prefix_or_indir_op): Don't recognize assignment for v32 or compatible. (get_3op_or_dip_prefix_op): Check for ']' after seeing '[rN+'. (cris_get_expression): Restore input_line_pointer if failing "early". (get_flags): Consider cris_arch and recognize flags accordingly. (branch_disp): Adjust for CRISv32. (gen_cond_branch_32): Similar. Emit error for common_v10_v32. (cris_number_to_imm): Use as_bad_where, not as_bad. Remove related FIXME. Don't insist on BFD_RELOC_32_PCREL fixup to be resolved. Don't enter zeros in object file for BFD_RELOC_32_PCREL. <case BFD_RELOC_CRIS_LAPCQ_OFFSET, BFD_RELOC_CRIS_SIGNED_16> <case BFD_RELOC_CRIS_SIGNED_8>: New case. (md_parse_option): Break out "return 1". <OPTION_ARCH> New case. (tc_gen_reloc): <case BFD_RELOC_CRIS_LAPCQ_OFFSET> <case BFD_RELOC_CRIS_SIGNED_16, BFD_RELOC_CRIS_SIGNED_8> <case BFD_RELOC_CRIS_UNSIGNED_8, BFD_RELOC_CRIS_UNSIGNED_16> <case BFD_RELOC_32_PCREL>: New cases. Addends for non-zero fx_pcrel are too in fx_offset. (md_show_usage): Show --march=<arch>. (md_apply_fix3): Adjust val for BFD_RELOC_CRIS_LAPCQ_OFFSET. (md_pcrel_from): BFD_RELOC_CRIS_LAPCQ_OFFSET is PC-relative too. (s_syntax) <struct syntaxes>: Properly constify member operand. * config/tc-cris.h (TARGET_MACH): Define. (cris_mach): Declare. * doc/as.texinfo (Overview) <CRIS>: Add --march=... * doc/c-cris.texi (CRIS-Symbols): New node for built-in symbols. (CRIS-Opts): Document --march=... (CRIS-Pseudos): Document .arch.
411 lines
15 KiB
Plaintext
411 lines
15 KiB
Plaintext
@c Copyright 2002 Free Software Foundation, Inc.
|
|
@c This is part of the GAS manual.
|
|
@c For copying conditions, see the file as.texinfo.
|
|
@c CRIS description contributed by Axis Communications.
|
|
@ifset GENERIC
|
|
@page
|
|
@node CRIS-Dependent
|
|
@chapter CRIS Dependent Features
|
|
@end ifset
|
|
@ifclear GENERIC
|
|
@node Machine Dependencies
|
|
@chapter CRIS Dependent Features
|
|
@end ifclear
|
|
|
|
@cindex CRIS support
|
|
@menu
|
|
* CRIS-Opts:: Command-line Options
|
|
* CRIS-Expand:: Instruction expansion
|
|
* CRIS-Symbols:: Symbols
|
|
* CRIS-Syntax:: Syntax
|
|
@end menu
|
|
|
|
@node CRIS-Opts
|
|
@section Command-line Options
|
|
|
|
@cindex options, CRIS
|
|
@cindex CRIS options
|
|
The CRIS version of @code{@value{AS}} has these
|
|
machine-dependent command-line options.
|
|
|
|
@cindex @option{--emulation=criself} command line option, CRIS
|
|
@cindex @option{--emulation=crisaout} command line option, CRIS
|
|
@cindex CRIS @option{--emulation=criself} command line option
|
|
@cindex CRIS @option{--emulation=crisaout} command line option
|
|
|
|
The format of the generated object files can be either ELF or
|
|
a.out, specified by the command-line options
|
|
@option{--emulation=crisaout} and @option{--emulation=criself}.
|
|
The default is ELF (criself), unless @code{@value{AS}} has been
|
|
configured specifically for a.out by using the configuration
|
|
name @code{cris-axis-aout}.
|
|
|
|
@cindex @option{--underscore} command line option, CRIS
|
|
@cindex @option{--no-underscore} command line option, CRIS
|
|
@cindex CRIS @option{--underscore} command line option
|
|
@cindex CRIS @option{--no-underscore} command line option
|
|
There are two different link-incompatible ELF object file
|
|
variants for CRIS, for use in environments where symbols are
|
|
expected to be prefixed by a leading @samp{_} character and for
|
|
environments without such a symbol prefix. The variant used for
|
|
GNU/Linux port has no symbol prefix. Which variant to produce
|
|
is specified by either of the options @option{--underscore} and
|
|
@option{--no-underscore}. The default is @option{--underscore}.
|
|
Since symbols in CRIS a.out objects are expected to have a
|
|
@samp{_} prefix, specifying @option{--no-underscore} when
|
|
generating a.out objects is an error. Besides the object format
|
|
difference, the effect of this option is to parse register names
|
|
differently (@pxref{crisnous}). The @option{--no-underscore}
|
|
option makes a @samp{$} register prefix mandatory.
|
|
|
|
@cindex @option{--pic} command line option, CRIS
|
|
@cindex CRIS @option{--pic} command line option
|
|
@cindex Position-independent code, CRIS
|
|
@cindex CRIS position-independent code
|
|
The option @option{--pic} must be passed to @code{@value{AS}} in
|
|
order to recognize the symbol syntax used for ELF (SVR4 PIC)
|
|
position-independent-code (@pxref{crispic}). This will also
|
|
affect expansion of instructions. The expansion with
|
|
@option{--pic} will use PC-relative rather than (slightly
|
|
faster) absolute addresses in those expansions.
|
|
|
|
@cindex @option{--march=@var{architecture}} command line option, CRIS
|
|
@cindex CRIS @option{--march=@var{architecture}} command line option
|
|
@cindex Architecture variant option, CRIS
|
|
@cindex CRIS architecture variant option
|
|
The option @option{--march=@var{architecture}}
|
|
@anchor{march-option}specifies the recognized instruction set
|
|
and recognized register names. It also controls the
|
|
architecture type of the object file. Valid values for
|
|
@var{architecture} are:
|
|
@table @code
|
|
|
|
@item v0_v10
|
|
All instructions and register names for any architecture variant
|
|
in the set v0@dots{}v10 are recognized. This is the
|
|
default if the target is configured as cris-*.
|
|
|
|
@item v10
|
|
Only instructions and register names for CRIS v10 (as found in
|
|
ETRAX 100 LX) are recognized. This is the default if the target
|
|
is configured as crisv10-*.
|
|
|
|
@item v32
|
|
Only instructions and register names for CRIS v32 (code name
|
|
Guinness) are recognized. This is the default if the target is
|
|
configured as crisv32-*. This value implies
|
|
@option{--no-mul-bug-abort}. (A subsequent
|
|
@option{--mul-bug-abort} will turn it back on.)
|
|
|
|
@item common_v10_v32
|
|
Only instructions with register names and addressing modes with
|
|
opcodes common to the v10 and v32 are recognized.
|
|
@end table
|
|
|
|
@cindex @option{-N} command line option, CRIS
|
|
@cindex CRIS @option{-N} command line option
|
|
When @option{-N} is specified, @code{@value{AS}} will emit a
|
|
warning when a 16-bit branch instruction is expanded into a
|
|
32-bit multiple-instruction construct (@pxref{CRIS-Expand}).
|
|
|
|
@cindex @option{--no-mul-bug-abort} command line option, CRIS
|
|
@cindex @option{--mul-bug-abort} command line option, CRIS
|
|
@cindex CRIS @option{--no-mul-bug-abort} command line option
|
|
@cindex CRIS @option{--mul-bug-abort} command line option
|
|
|
|
Some versions of the CRIS v10, for example in the Etrax 100 LX,
|
|
contain a bug that causes destabilizing memory accesses when a
|
|
multiply instruction is executed with certain values in the
|
|
first operand just before a cache-miss. When the
|
|
@option{--mul-bug-abort} command line option is active (the
|
|
default value), @code{@value{AS}} will refuse to assemble a file
|
|
containing a multiply instruction at a dangerous offset, one
|
|
that could be the last on a cache-line, or is in a section with
|
|
insufficient alignment. This placement checking does not catch
|
|
any case where the multiply instruction is dangerously placed
|
|
because it is located in a delay-slot. The
|
|
@option{--mul-bug-abort} command line option turns off the
|
|
checking.
|
|
|
|
@node CRIS-Expand
|
|
@section Instruction expansion
|
|
|
|
@cindex instruction expansion, CRIS
|
|
@cindex CRIS instruction expansion
|
|
@code{@value{AS}} will silently choose an instruction that fits
|
|
the operand size for @samp{[register+constant]} operands. For
|
|
example, the offset @code{127} in @code{move.d [r3+127],r4} fits
|
|
in an instruction using a signed-byte offset. Similarly,
|
|
@code{move.d [r2+32767],r1} will generate an instruction using a
|
|
16-bit offset. For symbolic expressions and constants that do
|
|
not fit in 16 bits including the sign bit, a 32-bit offset is
|
|
generated.
|
|
|
|
For branches, @code{@value{AS}} will expand from a 16-bit branch
|
|
instruction into a sequence of instructions that can reach a
|
|
full 32-bit address. Since this does not correspond to a single
|
|
instruction, such expansions can optionally be warned about.
|
|
@xref{CRIS-Opts}.
|
|
|
|
If the operand is found to fit the range, a @code{lapc} mnemonic
|
|
will translate to a @code{lapcq} instruction. Use @code{lapc.d}
|
|
to force the 32-bit @code{lapc} instruction.
|
|
|
|
Similarly, the @code{addo} mnemonic will translate to the
|
|
shortest fitting instruction of @code{addoq}, @code{addo.w} and
|
|
@code{addo.d}, when used with a operand that is a constant known
|
|
at assembly time.
|
|
|
|
@node CRIS-Symbols
|
|
@section Symbols
|
|
@cindex Symbols, built-in, CRIS
|
|
@cindex Symbols, CRIS, built-in
|
|
@cindex CRIS built-in symbols
|
|
@cindex Built-in symbols, CRIS
|
|
|
|
Some symbols are defined by the assembler. They're intended to
|
|
be used in conditional assembly, for example:
|
|
@smallexample
|
|
.if ..asm.arch.cris.v32
|
|
@var{code for CRIS v32}
|
|
.elseif ..asm.arch.cris.common_v10_v32
|
|
@var{code common to CRIS v32 and CRIS v10}
|
|
.elseif ..asm.arch.cris.v10 | ..asm.arch.cris.any_v0_v10
|
|
@var{code for v10}
|
|
.else
|
|
.error "Code needs to be added here."
|
|
.endif
|
|
@end smallexample
|
|
|
|
These symbols are defined in the assembler, reflecting
|
|
command-line options, either when specified or the default.
|
|
They are always defined, to 0 or 1.
|
|
@table @code
|
|
|
|
@item ..asm.arch.cris.any_v0_v10
|
|
This symbol is non-zero when @option{--march=v0_v10} is specified
|
|
or the default.
|
|
|
|
@item ..asm.arch.cris.common_v10_v32
|
|
Set according to the option @option{--march=common_v10_v32}.
|
|
|
|
@item ..asm.arch.cris.v10
|
|
Reflects the option @option{--march=v10}.
|
|
|
|
@item ..asm.arch.cris.v32
|
|
Corresponds to @option{--march=v10}.
|
|
@end table
|
|
|
|
Speaking of symbols, when a symbol is used in code, it can have
|
|
a suffix modifying its value for use in position-independent
|
|
code. @xref{CRIS-Pic}.
|
|
|
|
@node CRIS-Syntax
|
|
@section Syntax
|
|
|
|
There are different aspects of the CRIS assembly syntax.
|
|
|
|
@menu
|
|
* CRIS-Chars:: Special Characters
|
|
* CRIS-Pic:: Position-Independent Code Symbols
|
|
* CRIS-Regs:: Register Names
|
|
* CRIS-Pseudos:: Assembler Directives
|
|
@end menu
|
|
|
|
@node CRIS-Chars
|
|
@subsection Special Characters
|
|
@cindex line comment characters, CRIS
|
|
@cindex CRIS line comment characters
|
|
|
|
The character @samp{#} is a line comment character. It starts a
|
|
comment if and only if it is placed at the beginning of a line.
|
|
|
|
A @samp{;} character starts a comment anywhere on the line,
|
|
causing all characters up to the end of the line to be ignored.
|
|
|
|
A @samp{@@} character is handled as a line separator equivalent
|
|
to a logical new-line character (except in a comment), so
|
|
separate instructions can be specified on a single line.
|
|
|
|
@node CRIS-Pic
|
|
@subsection Symbols in position-independent code
|
|
@cindex Symbols in position-independent code, CRIS
|
|
@cindex CRIS symbols in position-independent code
|
|
@cindex Position-independent code, symbols in, CRIS
|
|
|
|
When generating @anchor{crispic}position-independent code (SVR4
|
|
PIC) for use in cris-axis-linux-gnu or crisv32-axis-linux-gnu
|
|
shared libraries, symbol
|
|
suffixes are used to specify what kind of run-time symbol lookup
|
|
will be used, expressed in the object as different
|
|
@emph{relocation types}. Usually, all absolute symbol values
|
|
must be located in a table, the @emph{global offset table},
|
|
leaving the code position-independent; independent of values of
|
|
global symbols and independent of the address of the code. The
|
|
suffix modifies the value of the symbol, into for example an
|
|
index into the global offset table where the real symbol value
|
|
is entered, or a PC-relative value, or a value relative to the
|
|
start of the global offset table. All symbol suffixes start
|
|
with the character @samp{:} (omitted in the list below). Every
|
|
symbol use in code or a read-only section must therefore have a
|
|
PIC suffix to enable a useful shared library to be created.
|
|
Usually, these constructs must not be used with an additive
|
|
constant offset as is usually allowed, i.e.@: no 4 as in
|
|
@code{symbol + 4} is allowed. This restriction is checked at
|
|
link-time, not at assembly-time.
|
|
|
|
@table @code
|
|
@item GOT
|
|
|
|
Attaching this suffix to a symbol in an instruction causes the
|
|
symbol to be entered into the global offset table. The value is
|
|
a 32-bit index for that symbol into the global offset table.
|
|
The name of the corresponding relocation is
|
|
@samp{R_CRIS_32_GOT}. Example: @code{move.d
|
|
[$r0+extsym:GOT],$r9}
|
|
|
|
@item GOT16
|
|
|
|
Same as for @samp{GOT}, but the value is a 16-bit index into the
|
|
global offset table. The corresponding relocation is
|
|
@samp{R_CRIS_16_GOT}. Example: @code{move.d
|
|
[$r0+asymbol:GOT16],$r10}
|
|
|
|
@item PLT
|
|
|
|
This suffix is used for function symbols. It causes a
|
|
@emph{procedure linkage table}, an array of code stubs, to be
|
|
created at the time the shared object is created or linked
|
|
against, together with a global offset table entry. The value
|
|
is a pc-relative offset to the corresponding stub code in the
|
|
procedure linkage table. This arrangement causes the run-time
|
|
symbol resolver to be called to look up and set the value of the
|
|
symbol the first time the function is called (at latest;
|
|
depending environment variables). It is only safe to leave the
|
|
symbol unresolved this way if all references are function calls.
|
|
The name of the relocation is @samp{R_CRIS_32_PLT_PCREL}.
|
|
Example: @code{add.d fnname:PLT,$pc}
|
|
|
|
@item PLTG
|
|
|
|
Like PLT, but the value is relative to the beginning of the
|
|
global offset table. The relocation is
|
|
@samp{R_CRIS_32_PLT_GOTREL}. Example: @code{move.d
|
|
fnname:PLTG,$r3}
|
|
|
|
@item GOTPLT
|
|
|
|
Similar to @samp{PLT}, but the value of the symbol is a 32-bit
|
|
index into the global offset table. This is somewhat of a mix
|
|
between the effect of the @samp{GOT} and the @samp{PLT} suffix;
|
|
the difference to @samp{GOT} is that there will be a procedure
|
|
linkage table entry created, and that the symbol is assumed to
|
|
be a function entry and will be resolved by the run-time
|
|
resolver as with @samp{PLT}. The relocation is
|
|
@samp{R_CRIS_32_GOTPLT}. Example: @code{jsr
|
|
[$r0+fnname:GOTPLT]}
|
|
|
|
@item GOTPLT16
|
|
|
|
A variant of @samp{GOTPLT} giving a 16-bit value. Its
|
|
relocation name is @samp{R_CRIS_16_GOTPLT}. Example: @code{jsr
|
|
[$r0+fnname:GOTPLT16]}
|
|
|
|
@item GOTOFF
|
|
|
|
This suffix must only be attached to a local symbol, but may be
|
|
used in an expression adding an offset. The value is the
|
|
address of the symbol relative to the start of the global offset
|
|
table. The relocation name is @samp{R_CRIS_32_GOTREL}.
|
|
Example: @code{move.d [$r0+localsym:GOTOFF],r3}
|
|
@end table
|
|
|
|
@node CRIS-Regs
|
|
@subsection Register names
|
|
@cindex register names, CRIS
|
|
@cindex CRIS register names
|
|
|
|
A @samp{$} character may always prefix a general or special
|
|
register name in an instruction operand but is mandatory when
|
|
the option @option{--no-underscore} is specified or when the
|
|
@code{.syntax register_prefix} directive is in effect
|
|
(@pxref{crisnous}). Register names are case-insensitive.
|
|
|
|
@node CRIS-Pseudos
|
|
@subsection Assembler Directives
|
|
@cindex assembler directives, CRIS
|
|
@cindex pseudo-ops, CRIS
|
|
@cindex CRIS assembler directives
|
|
@cindex CRIS pseudo-ops
|
|
|
|
There are a few CRIS-specific pseudo-directives in addition to
|
|
the generic ones. @xref{Pseudo Ops}. Constants emitted by
|
|
pseudo-directives are in little-endian order for CRIS. There is
|
|
no support for floating-point-specific directives for CRIS.
|
|
|
|
@table @code
|
|
@item .dword EXPRESSIONS
|
|
@cindex assembler directive .dword, CRIS
|
|
@cindex pseudo-op .dword, CRIS
|
|
@cindex CRIS assembler directive .dword
|
|
@cindex CRIS pseudo-op .dword
|
|
|
|
The @code{.dword} directive is a synonym for @code{.int},
|
|
expecting zero or more EXPRESSIONS, separated by commas. For
|
|
each expression, a 32-bit little-endian constant is emitted.
|
|
|
|
@item .syntax ARGUMENT
|
|
@cindex assembler directive .syntax, CRIS
|
|
@cindex pseudo-op .syntax, CRIS
|
|
@cindex CRIS assembler directive .syntax
|
|
@cindex CRIS pseudo-op .syntax
|
|
The @code{.syntax} directive takes as @var{ARGUMENT} one of the
|
|
following case-sensitive choices.
|
|
|
|
@table @code
|
|
@item no_register_prefix
|
|
|
|
The @code{.syntax no_register_prefix} @anchor{crisnous}directive
|
|
makes a @samp{$} character prefix on all registers optional. It
|
|
overrides a previous setting, including the corresponding effect
|
|
of the option @option{--no-underscore}. If this directive is
|
|
used when ordinary symbols do not have a @samp{_} character
|
|
prefix, care must be taken to avoid ambiguities whether an
|
|
operand is a register or a symbol; using symbols with names the
|
|
same as general or special registers then invoke undefined
|
|
behavior.
|
|
|
|
@item register_prefix
|
|
|
|
This directive makes a @samp{$} character prefix on all
|
|
registers mandatory. It overrides a previous setting, including
|
|
the corresponding effect of the option @option{--underscore}.
|
|
|
|
@item leading_underscore
|
|
|
|
This is an assertion directive, emitting an error if the
|
|
@option{--no-underscore} option is in effect.
|
|
|
|
@item no_leading_underscore
|
|
|
|
This is the opposite of the @code{.syntax leading_underscore}
|
|
directive and emits an error if the option @option{--underscore}
|
|
is in effect.
|
|
@end table
|
|
|
|
@item .arch ARGUMENT
|
|
@cindex assembler directive .arch, CRIS
|
|
@cindex pseudo-op .arch, CRIS
|
|
@cindex CRIS assembler directive .arch
|
|
@cindex CRIS pseudo-op .arch
|
|
This is an assertion directive, giving an error if the specified
|
|
@var{ARGUMENT} is not the same as the specified or default value
|
|
for the @option{--march=@var{architecture}} option
|
|
(@pxref{march-option}).
|
|
|
|
@c If you compare with md_pseudo_table, you see that we don't
|
|
@c document ".file" and ".loc" here. This is because we're just
|
|
@c wrapping the corresponding ELF function and emitting an error for
|
|
@c a.out.
|
|
@end table
|