binutils-gdb/gdb/testsuite/gdb.c++/annota2.exp

235 lines
8.3 KiB
Plaintext

# Copyright 1999, 2000, 2001, 2002, 2003
# Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
# Please email any bugs, comments, and/or additions to this file to:
# bug-gdb@prep.ai.mit.edu
# This file was written by Elena Zannoni (ezannoni@cygnus.com)
if $tracelevel then {
strace $tracelevel
}
#
# test running programs
#
set prms_id 0
set bug_id 0
if { [skip_cplus_tests] } { continue }
set testfile "annota2"
set srcfile ${testfile}.cc
set binfile ${objdir}/${subdir}/${testfile}
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug c++ additional_flags=-w}] != "" } {
gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
}
# are we on a target board? If so, don't run these tests.
# note: this is necessary because we cannot use runto_main (which would
# work for remote targets too) because of the different prompt we get
# when using annotation level 2.
#
if [is_remote target] then {
return 0
}
gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${binfile}
if [target_info exists gdb_stub] {
gdb_step_for_stub;
}
#
# line number where we need to stop in main
#
set main_line 25
# The commands we test here produce many lines of output; disable "press
# <return> to continue" prompts.
send_gdb "set height 0\n"
gdb_expect -re "$gdb_prompt $"
#
# break at main
#
gdb_test "break 25" \
"Breakpoint.*at.* file .*$srcfile, line.*" \
"breakpoint main"
#
# NOTE: this prompt is OK only when the annotation level is > 1
# NOTE: When this prompt is in use the gdb_test procedure cannot be used because
# it assumes that the last char of the gdb_prompt is a white space. This is not
# true with this annotated prompt. So we must use send_gdb and gdb_expect.
#
set old_gdb_prompt $gdb_prompt
set gdb_prompt "\r\n\032\032pre-prompt\r\n$gdb_prompt \r\n\032\032prompt\r\n"
send_gdb "set annotate 2\n"
gdb_expect {
-re "set annotate 2\r\n$gdb_prompt$" { pass "annotation set at level 2" }
-re ".*$gdb_prompt$" { fail "annotation set at level 2" }
timeout { fail "annotation set at level 2 (timeout)" }
}
send_gdb "run\n"
gdb_expect {
-re "$main_line.*$gdb_prompt$" { pass "run until main breakpoint" }
-re ".*$gdb_prompt$" { fail "run until main breakpoint" }
timeout { fail "run until main breakpoint (timeout)" }
}
#
# print class 'a' with public fields.
# this will test:
# annotate-field-begin
# annotate-field-name-end
# annotate-field-value
# annotate-field-end
#
send_gdb "print a\n"
gdb_expect {
-re "\r\n\032\032post-prompt\r\n\r\n\032\032value-history-begin 1 -\r\n.*= \r\n\032\032value-history-value\r\n\\{\r\n\032\032field-begin -\r\nx\r\n\032\032field-name-end\r\n = \r\n\032\032field-value\r\n1\r\n\032\032field-end\r\n, \r\n\032\032field-begin -\r\ny\r\n\032\032field-name-end\r\n = \r\n\032\032field-value\r\n2\r\n\032\032field-end\r\n\\}\r\n\r\n\032\032value-history-end\r\n$gdb_prompt$" \
{ pass "print class" }
-re ".*$gdb_prompt$" { fail "print class" }
timeout { fail "print class (timeout)" }
}
#
# continue until exit
# this will test:
# annotate-exited
#
send_gdb "continue\n"
gdb_expect {
-re "\r\n\032\032post-prompt\r\nContinuing.\r\n\r\n\032\032starting\r\n\r\n\032\032frames-invalid\r\na.x is 1\r\n\r\n\032\032frames-invalid\r\n\r\n\032\032exited 0\r\n\r\nProgram exited normally.\r\n\r\n\032\032frames-invalid\r\n\r\n\032\032stopped\r\n$gdb_prompt$" \
{ pass "continue until exit" }
-re ".*$gdb_prompt$" { fail "continue to exit" }
timeout { fail "continue to exit (timeout)" }
}
#
# delete all breakpoints
#
send_gdb "delete\n"
gdb_expect {
-re ".*Delete all breakpoints. \\(y or n\\) \r\n\032\032query.*$" {
send_gdb "y\n"
gdb_expect {
-re "\r\n\032\032post-query\r\n$gdb_prompt$" { pass "delete bps" }
-re ".*$gdb_prompt$" { fail "delete bps" }
timeout { fail "delete bps (timeout)" }
}
}
-re ".*$gdb_prompt$" { fail "delete bps" }
timeout { fail "delete bps (timeout)" }
}
#
# break at first line of main.
#
send_gdb "break 22\n"
gdb_expect {
-re "\r\n\032\032post-prompt\r\n\r\n\032\032breakpoints-invalid\r\nBreakpoint.*at $hex: file.*$srcfile, line.*\r\n$gdb_prompt$" \
{ pass "breakpoint at main" }
-re ".*$gdb_prompt$" { fail "break at main" }
timeout { fail "break at main (timeout)" }
}
#
# change value of main_line
#
set main_line 22
#
# run program up to breakpoint.
#
send_gdb "run\n"
gdb_expect {
-re "$main_line.*$gdb_prompt$" { pass "run until main breakpoint" }
-re ".*$gdb_prompt$" { fail "run until main breakpoint" }
timeout { fail "run until main breakpoint (timeout)" }
}
#
# set up a watch point on a.x
#
send_gdb "watch a.x\n"
gdb_expect {
-re "\r\n\032\032post-prompt\r\n\r\n\032\032breakpoints-invalid\r\n.*atchpoint 3: a.x\r\n$gdb_prompt$" \
{ pass "set watch on a.x" }
-re ".*$gdb_prompt$" { fail "set watch on a.x" }
timeout { fail "set watch on a.x (timeout)" }
}
#
# do a next, so that the watchpoint triggers. This will test:
# annotate-watchpoint
#
send_gdb "next\n"
gdb_expect {
-re "\r\n\032\032post-prompt\r\n\r\n\032\032starting\r\n\r\n\032\032frames-invalid\r\n\r\n\032\032frames-invalid\r\n\r\n\032\032frames-invalid\r\n\r\n\032\032watchpoint 3\r\nWatchpoint 3: a.x\r\n\r\nOld value = 0\r\nNew value = 1\r\n\r\n\032\032frame-begin 0 $hex\r\n\r\n\032\032frame-function-name\r\nmain\r\n\032\032frame-args\r\n \\(\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n.*$srcfile\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n$decimal\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032source .*$srcfile.*beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n$gdb_prompt$" \
{ pass "watch triggered on a.x" }
-re "\r\n\032\032post-prompt\r\n\r\n\032\032starting\r\n\r\n\032\032frames-invalid\r\n\r\n\032\032frames-invalid\r\n\r\n\032\032frames-invalid\r\n\r\n\032\032frames-invalid\r\n\r\n\032\032watchpoint 3\r\n\.*atchpoint 3: a.x\r\n\r\nOld value = 0\r\nNew value = 1\r\n\r\n\032\032frame-begin 0 $hex\r\n\r\n\032\032frame-function-name\r\nmain\r\n\032\032frame-args\r\n \\(\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n.*$srcfile\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n$decimal\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032source .*$srcfile.*beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n.*$gdb_prompt$" \
{ pass "watch triggered on a.x" }
-re "\r\n\032\032post-prompt\r\n\r\n\032\032starting\r\n\r\n\032\032frames-invalid\r\n\r\n\032\032source .*$srcfile.*beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n$gdb_prompt$" \
{ kfail "gdb/38" "watch triggered on a.x" }
-re ".*$gdb_prompt$" { fail "watch triggered on a.x" }
timeout { fail "watch triggered on a.x (timeout)" }
}
#
# send ^C to gdb, so that the quit() function gets called
# and annotate-quit is tested
# test:
# annotate-quit
#
# This test sometimes fails, but not reproducibly. See gdb/544.
#
send_gdb "\003"
gdb_expect {
-re "\r\n\032\032error-begin\r\nQuit\r\n\r\n\032\032quit\r\n$gdb_prompt$" \
{ pass "annotate-quit" }
-re "$gdb_prompt$" { kfail "gdb/544" "annotate-quit" }
-re ".*$gdb_prompt$" { fail "annotate-quit" }
timeout { fail "annotate-quit (timeout)" }
}
#
# FIXME: the testsuite does not currently have tests for
# annotate_catchpoints and annotate_function_call
# and a few variants of the annotations that are
# tested (marked by FIXME on the annot?.exp files)
#
# reinstall the old prompt for the rest of the testsuite.
set gdb_prompt $old_gdb_prompt