OpenE2K/binutils-gdb
12
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
7ed2c8b026
binutils-gdb/gas/app.c
Nick Clifton 8d9cd6b19b Add support for h8300hn and h8300sn
2003-04-24 12:36:08 +00:00

1351 lines
32 KiB
C
Raw Blame History

/* This is the Assembler Pre-Processor
Copyright 1987, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
1999, 2000, 2002, 2003
Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
GAS is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.
GAS is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with GAS; see the file COPYING. If not, write to the Free
Software Foundation, 59 Temple Place - Suite 330, Boston, MA
02111-1307, USA. */
/* Modified by Allen Wirfs-Brock, Instantiations Inc 2/90. */
/* App, the assembler pre-processor. This pre-processor strips out excess
spaces, turns single-quoted characters into a decimal constant, and turns
# <number> <filename> <garbage> into a .line <number>\n.file <filename>
pair. This needs better error-handling. */
#include <stdio.h>
#include "as.h" /* For BAD_CASE() only. */
#if (__STDC__ != 1)
#ifndef const
#define const /* empty */
#endif
#endif
#ifdef TC_M68K
/* Whether we are scrubbing in m68k MRI mode. This is different from
flag_m68k_mri, because the two flags will be affected by the .mri
pseudo-op at different times. */
static int scrub_m68k_mri;
/* The pseudo-op which switches in and out of MRI mode. See the
comment in do_scrub_chars. */
static const char mri_pseudo[] = ".mri 0";
#else
#define scrub_m68k_mri 0
#endif
#if defined TC_ARM && defined OBJ_ELF
/* The pseudo-op for which we need to special-case `@' characters.
See the comment in do_scrub_chars. */
static const char symver_pseudo[] = ".symver";
static const char * symver_state;
#endif
static char lex[256];
static const char symbol_chars[] =
"$._ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789";
#define LEX_IS_SYMBOL_COMPONENT 1
#define LEX_IS_WHITESPACE 2
#define LEX_IS_LINE_SEPARATOR 3
#define LEX_IS_COMMENT_START 4
#define LEX_IS_LINE_COMMENT_START 5
#define LEX_IS_TWOCHAR_COMMENT_1ST 6
#define LEX_IS_STRINGQUOTE 8
#define LEX_IS_COLON 9
#define LEX_IS_NEWLINE 10
#define LEX_IS_ONECHAR_QUOTE 11
#ifdef TC_V850
#define LEX_IS_DOUBLEDASH_1ST 12
#endif
#ifdef TC_M32R
#define DOUBLEBAR_PARALLEL
#endif
#ifdef DOUBLEBAR_PARALLEL
#define LEX_IS_DOUBLEBAR_1ST 13
#endif
#define LEX_IS_PARALLEL_SEPARATOR 14
#define IS_SYMBOL_COMPONENT(c) (lex[c] == LEX_IS_SYMBOL_COMPONENT)
#define IS_WHITESPACE(c) (lex[c] == LEX_IS_WHITESPACE)
#define IS_LINE_SEPARATOR(c) (lex[c] == LEX_IS_LINE_SEPARATOR)
#define IS_PARALLEL_SEPARATOR(c) (lex[c] == LEX_IS_PARALLEL_SEPARATOR)
#define IS_COMMENT(c) (lex[c] == LEX_IS_COMMENT_START)
#define IS_LINE_COMMENT(c) (lex[c] == LEX_IS_LINE_COMMENT_START)
#define IS_NEWLINE(c) (lex[c] == LEX_IS_NEWLINE)
static int process_escape PARAMS ((int));
/* FIXME-soon: The entire lexer/parser thingy should be
built statically at compile time rather than dynamically
each and every time the assembler is run. xoxorich. */
void
do_scrub_begin (m68k_mri)
int m68k_mri ATTRIBUTE_UNUSED;
{
const char *p;
int c;
lex[' '] = LEX_IS_WHITESPACE;
lex['\t'] = LEX_IS_WHITESPACE;
lex['\r'] = LEX_IS_WHITESPACE;
lex['\n'] = LEX_IS_NEWLINE;
lex[':'] = LEX_IS_COLON;
#ifdef TC_M68K
scrub_m68k_mri = m68k_mri;
if (! m68k_mri)
#endif
{
lex['"'] = LEX_IS_STRINGQUOTE;
#if ! defined (TC_HPPA) && ! defined (TC_I370)
/* I370 uses single-quotes to delimit integer, float constants. */
lex['\''] = LEX_IS_ONECHAR_QUOTE;
#endif
#ifdef SINGLE_QUOTE_STRINGS
lex['\''] = LEX_IS_STRINGQUOTE;
#endif
}
/* Note: if any other character can be LEX_IS_STRINGQUOTE, the loop
in state 5 of do_scrub_chars must be changed. */
/* Note that these override the previous defaults, e.g. if ';' is a
comment char, then it isn't a line separator. */
for (p = symbol_chars; *p; ++p)
lex[(unsigned char) *p] = LEX_IS_SYMBOL_COMPONENT;
for (c = 128; c < 256; ++c)
lex[c] = LEX_IS_SYMBOL_COMPONENT;
#ifdef tc_symbol_chars
/* This macro permits the processor to specify all characters which
may appears in an operand. This will prevent the scrubber from
discarding meaningful whitespace in certain cases. The i386
backend uses this to support prefixes, which can confuse the
scrubber as to whether it is parsing operands or opcodes. */
for (p = tc_symbol_chars; *p; ++p)
lex[(unsigned char) *p] = LEX_IS_SYMBOL_COMPONENT;
#endif
/* The m68k backend wants to be able to change comment_chars. */
#ifndef tc_comment_chars
#define tc_comment_chars comment_chars
#endif
for (p = tc_comment_chars; *p; p++)
lex[(unsigned char) *p] = LEX_IS_COMMENT_START;
for (p = line_comment_chars; *p; p++)
lex[(unsigned char) *p] = LEX_IS_LINE_COMMENT_START;
for (p = line_separator_chars; *p; p++)
lex[(unsigned char) *p] = LEX_IS_LINE_SEPARATOR;
#ifdef tc_parallel_separator_chars
/* This macro permits the processor to specify all characters which
separate parallel insns on the same line. */
for (p = tc_parallel_separator_chars; *p; p++)
lex[(unsigned char) *p] = LEX_IS_PARALLEL_SEPARATOR;
#endif
/* Only allow slash-star comments if slash is not in use.
FIXME: This isn't right. We should always permit them. */
if (lex['/'] == 0)
lex['/'] = LEX_IS_TWOCHAR_COMMENT_1ST;
#ifdef TC_M68K
if (m68k_mri)
{
lex['\''] = LEX_IS_STRINGQUOTE;
lex[';'] = LEX_IS_COMMENT_START;
lex['*'] = LEX_IS_LINE_COMMENT_START;
/* The MRI documentation says '!' is LEX_IS_COMMENT_START, but
then it can't be used in an expression. */
lex['!'] = LEX_IS_LINE_COMMENT_START;
}
#endif
#ifdef TC_V850
lex['-'] = LEX_IS_DOUBLEDASH_1ST;
#endif
#ifdef DOUBLEBAR_PARALLEL
lex['|'] = LEX_IS_DOUBLEBAR_1ST;
#endif
#ifdef TC_D30V
/* Must do this is we want VLIW instruction with "->" or "<-". */
lex['-'] = LEX_IS_SYMBOL_COMPONENT;
#endif
}
/* Saved state of the scrubber. */
static int state;
static int old_state;
static char *out_string;
static char out_buf[20];
static int add_newlines;
static char *saved_input;
static int saved_input_len;
static char input_buffer[32 * 1024];
static const char *mri_state;
static char mri_last_ch;
/* Data structure for saving the state of app across #include's. Note that
app is called asynchronously to the parsing of the .include's, so our
state at the time .include is interpreted is completely unrelated.
That's why we have to save it all. */
struct app_save
{
int state;
int old_state;
char * out_string;
char out_buf[sizeof (out_buf)];
int add_newlines;
char * saved_input;
int saved_input_len;
#ifdef TC_M68K
int scrub_m68k_mri;
#endif
const char * mri_state;
char mri_last_ch;
#if defined TC_ARM && defined OBJ_ELF
const char * symver_state;
#endif
};
char *
app_push ()
{
register struct app_save *saved;
saved = (struct app_save *) xmalloc (sizeof (*saved));
saved->state = state;
saved->old_state = old_state;
saved->out_string = out_string;
memcpy (saved->out_buf, out_buf, sizeof (out_buf));
saved->add_newlines = add_newlines;
if (saved_input == NULL)
saved->saved_input = NULL;
else
{
saved->saved_input = xmalloc (saved_input_len);
memcpy (saved->saved_input, saved_input, saved_input_len);
saved->saved_input_len = saved_input_len;
}
#ifdef TC_M68K
saved->scrub_m68k_mri = scrub_m68k_mri;
#endif
saved->mri_state = mri_state;
saved->mri_last_ch = mri_last_ch;
#if defined TC_ARM && defined OBJ_ELF
saved->symver_state = symver_state;
#endif
/* do_scrub_begin() is not useful, just wastes time. */
state = 0;
saved_input = NULL;
return (char *) saved;
}
void
app_pop (arg)
char *arg;
{
register struct app_save *saved = (struct app_save *) arg;
/* There is no do_scrub_end (). */
state = saved->state;
old_state = saved->old_state;
out_string = saved->out_string;
memcpy (out_buf, saved->out_buf, sizeof (out_buf));
add_newlines = saved->add_newlines;
if (saved->saved_input == NULL)
saved_input = NULL;
else
{
assert (saved->saved_input_len <= (int) (sizeof input_buffer));
memcpy (input_buffer, saved->saved_input, saved->saved_input_len);
saved_input = input_buffer;
saved_input_len = saved->saved_input_len;
free (saved->saved_input);
}
#ifdef TC_M68K
scrub_m68k_mri = saved->scrub_m68k_mri;
#endif
mri_state = saved->mri_state;
mri_last_ch = saved->mri_last_ch;
#if defined TC_ARM && defined OBJ_ELF
symver_state = saved->symver_state;
#endif
free (arg);
}
/* @@ This assumes that \n &c are the same on host and target. This is not
necessarily true. */
static int
process_escape (ch)
int ch;
{
switch (ch)
{
case 'b':
return '\b';
case 'f':
return '\f';
case 'n':
return '\n';
case 'r':
return '\r';
case 't':
return '\t';
case '\'':
return '\'';
case '"':
return '\"';
default:
return ch;
}
}
/* This function is called to process input characters. The GET
parameter is used to retrieve more input characters. GET should
set its parameter to point to a buffer, and return the length of
the buffer; it should return 0 at end of file. The scrubbed output
characters are put into the buffer starting at TOSTART; the TOSTART
buffer is TOLEN bytes in length. The function returns the number
of scrubbed characters put into TOSTART. This will be TOLEN unless
end of file was seen. This function is arranged as a state
machine, and saves its state so that it may return at any point.
This is the way the old code used to work. */
int
do_scrub_chars (get, tostart, tolen)
int (*get) PARAMS ((char *, int));
char *tostart;
int tolen;
{
char *to = tostart;
char *toend = tostart + tolen;
char *from;
char *fromend;
int fromlen;
register int ch, ch2 = 0;
/*State 0: beginning of normal line
1: After first whitespace on line (flush more white)
2: After first non-white (opcode) on line (keep 1white)
3: after second white on line (into operands) (flush white)
4: after putting out a .line, put out digits
5: parsing a string, then go to old-state
6: putting out \ escape in a "d string.
7: After putting out a .appfile, put out string.
8: After putting out a .appfile string, flush until newline.
9: After seeing symbol char in state 3 (keep 1white after symchar)
10: After seeing whitespace in state 9 (keep white before symchar)
11: After seeing a symbol character in state 0 (eg a label definition)
-1: output string in out_string and go to the state in old_state
-2: flush text until a '*' '/' is seen, then go to state old_state
#ifdef TC_V850
12: After seeing a dash, looking for a second dash as a start
of comment.
#endif
#ifdef DOUBLEBAR_PARALLEL
13: After seeing a vertical bar, looking for a second
vertical bar as a parallel expression separator.
#endif
*/
/* I added states 9 and 10 because the MIPS ECOFF assembler uses
constructs like ``.loc 1 20''. This was turning into ``.loc
120''. States 9 and 10 ensure that a space is never dropped in
between characters which could appear in an identifier. Ian
Taylor, ian@cygnus.com.
I added state 11 so that something like "Lfoo add %r25,%r26,%r27" works
correctly on the PA (and any other target where colons are optional).
Jeff Law, law@cs.utah.edu.
I added state 13 so that something like "cmp r1, r2 || trap #1" does not
get squashed into "cmp r1,r2||trap#1", with the all important space
between the 'trap' and the '#1' being eliminated. nickc@cygnus.com */
/* This macro gets the next input character. */
#define GET() \
(from < fromend \
? * (unsigned char *) (from++) \
: (saved_input = NULL, \
fromlen = (*get) (input_buffer, sizeof input_buffer), \
from = input_buffer, \
fromend = from + fromlen, \
(fromlen == 0 \
? EOF \
: * (unsigned char *) (from++))))
/* This macro pushes a character back on the input stream. */
#define UNGET(uch) (*--from = (uch))
/* This macro puts a character into the output buffer. If this
character fills the output buffer, this macro jumps to the label
TOFULL. We use this rather ugly approach because we need to
handle two different termination conditions: EOF on the input
stream, and a full output buffer. It would be simpler if we
always read in the entire input stream before processing it, but
I don't want to make such a significant change to the assembler's
memory usage. */
#define PUT(pch) \
do \
{ \
*to++ = (pch); \
if (to >= toend) \
goto tofull; \
} \
while (0)
if (saved_input != NULL)
{
from = saved_input;
fromend = from + saved_input_len;
}
else
{
fromlen = (*get) (input_buffer, sizeof input_buffer);
if (fromlen == 0)
return 0;
from = input_buffer;
fromend = from + fromlen;
}
while (1)
{
/* The cases in this switch end with continue, in order to
branch back to the top of this while loop and generate the
next output character in the appropriate state. */
switch (state)
{
case -1:
ch = *out_string++;
if (*out_string == '\0')
{
state = old_state;
old_state = 3;
}
PUT (ch);
continue;
case -2:
for (;;)
{
do
{
ch = GET ();
if (ch == EOF)
{
as_warn (_("end of file in comment"));
goto fromeof;
}
if (ch == '\n')
PUT ('\n');
}
while (ch != '*');
while ((ch = GET ()) == '*')
;
if (ch == EOF)
{
as_warn (_("end of file in comment"));
goto fromeof;
}
if (ch == '/')
break;
UNGET (ch);
}
state = old_state;
UNGET (' ');
continue;
case 4:
ch = GET ();
if (ch == EOF)
goto fromeof;
else if (ch >= '0' && ch <= '9')
PUT (ch);
else
{
while (ch != EOF && IS_WHITESPACE (ch))
ch = GET ();
if (ch == '"')
{
UNGET (ch);
if (scrub_m68k_mri)
out_string = "\n\tappfile ";
else
out_string = "\n\t.appfile ";
old_state = 7;
state = -1;
PUT (*out_string++);
}
else
{
while (ch != EOF && ch != '\n')
ch = GET ();
state = 0;
PUT (ch);
}
}
continue;
case 5:
/* We are going to copy everything up to a quote character,
with special handling for a backslash. We try to
optimize the copying in the simple case without using the
GET and PUT macros. */
{
char *s;
int len;
for (s = from; s < fromend; s++)
{
ch = *s;
/* This condition must be changed if the type of any
other character can be LEX_IS_STRINGQUOTE. */
if (ch == '\\'
|| ch == '"'
|| ch == '\''
|| ch == '\n')
break;
}
len = s - from;
if (len > toend - to)
len = toend - to;
if (len > 0)
{
memcpy (to, from, len);
to += len;
from += len;
}
}
ch = GET ();
if (ch == EOF)
{
as_warn (_("end of file in string; inserted '\"'"));
state = old_state;
UNGET ('\n');
PUT ('"');
}
else if (lex[ch] == LEX_IS_STRINGQUOTE)
{
state = old_state;
PUT (ch);
}
#ifndef NO_STRING_ESCAPES
else if (ch == '\\')
{
state = 6;
PUT (ch);
}
#endif
else if (scrub_m68k_mri && ch == '\n')
{
/* Just quietly terminate the string. This permits lines like
bne label loop if we haven't reach end yet. */
state = old_state;
UNGET (ch);
PUT ('\'');
}
else
{
PUT (ch);
}
continue;
case 6:
state = 5;
ch = GET ();
switch (ch)
{
/* Handle strings broken across lines, by turning '\n' into
'\\' and 'n'. */
case '\n':
UNGET ('n');
add_newlines++;
PUT ('\\');
continue;
case EOF:
as_warn (_("end of file in string; '\"' inserted"));
PUT ('"');
continue;
case '"':
case '\\':
case 'b':
case 'f':
case 'n':
case 'r':
case 't':
case 'v':
case 'x':
case 'X':
case '0':
case '1':
case '2':
case '3':
case '4':
case '5':
case '6':
case '7':
break;
default:
#ifdef ONLY_STANDARD_ESCAPES
as_warn (_("unknown escape '\\%c' in string; ignored"), ch);
#endif
break;
}
PUT (ch);
continue;
case 7:
ch = GET ();
state = 5;
old_state = 8;
if (ch == EOF)
goto fromeof;
PUT (ch);
continue;
case 8:
do
ch = GET ();
while (ch != '\n' && ch != EOF);
if (ch == EOF)
goto fromeof;
state = 0;
PUT (ch);
continue;
#ifdef DOUBLEBAR_PARALLEL
case 13:
ch = GET ();
if (ch != '|')
abort ();
/* Reset back to state 1 and pretend that we are parsing a
line from just after the first white space. */
state = 1;
PUT ('|');
continue;
#endif
}
/* OK, we are somewhere in states 0 through 4 or 9 through 11. */
/* flushchar: */
ch = GET ();
recycle:
#if defined TC_ARM && defined OBJ_ELF
/* We need to watch out for .symver directives. See the comment later
in this function. */
if (symver_state == NULL)
{
if ((state == 0 || state == 1) && ch == symver_pseudo[0])
symver_state = symver_pseudo + 1;
}
else
{
/* We advance to the next state if we find the right
character. */
if (ch != '\0' && (*symver_state == ch))
++symver_state;
else if (*symver_state != '\0')
/* We did not get the expected character, or we didn't
get a valid terminating character after seeing the
entire pseudo-op, so we must go back to the beginning. */
symver_state = NULL;
else
{
/* We've read the entire pseudo-op. If this is the end
of the line, go back to the beginning. */
if (IS_NEWLINE (ch))
symver_state = NULL;
}
}
#endif /* TC_ARM && OBJ_ELF */
#ifdef TC_M68K
/* We want to have pseudo-ops which control whether we are in
MRI mode or not. Unfortunately, since m68k MRI mode affects
the scrubber, that means that we need a special purpose
recognizer here. */
if (mri_state == NULL)
{
if ((state == 0 || state == 1)
&& ch == mri_pseudo[0])
mri_state = mri_pseudo + 1;
}
else
{
/* We advance to the next state if we find the right
character, or if we need a space character and we get any
whitespace character, or if we need a '0' and we get a
'1' (this is so that we only need one state to handle
``.mri 0'' and ``.mri 1''). */
if (ch != '\0'
&& (*mri_state == ch
|| (*mri_state == ' '
&& lex[ch] == LEX_IS_WHITESPACE)
|| (*mri_state == '0'
&& ch == '1')))
{
mri_last_ch = ch;
++mri_state;
}
else if (*mri_state != '\0'
|| (lex[ch] != LEX_IS_WHITESPACE
&& lex[ch] != LEX_IS_NEWLINE))
{
/* We did not get the expected character, or we didn't
get a valid terminating character after seeing the
entire pseudo-op, so we must go back to the
beginning. */
mri_state = NULL;
}
else
{
/* We've read the entire pseudo-op. mips_last_ch is
either '0' or '1' indicating whether to enter or
leave MRI mode. */
do_scrub_begin (mri_last_ch == '1');
mri_state = NULL;
/* We continue handling the character as usual. The
main gas reader must also handle the .mri pseudo-op
to control expression parsing and the like. */
}
}
#endif
if (ch == EOF)
{
if (state != 0)
{
as_warn (_("end of file not at end of a line; newline inserted"));
state = 0;
PUT ('\n');
}
goto fromeof;
}
switch (lex[ch])
{
case LEX_IS_WHITESPACE:
do
{
ch = GET ();
}
while (ch != EOF && IS_WHITESPACE (ch));
if (ch == EOF)
goto fromeof;
if (state == 0)
{
/* Preserve a single whitespace character at the
beginning of a line. */
state = 1;
UNGET (ch);
PUT (' ');
break;
}
#ifdef KEEP_WHITE_AROUND_COLON
if (lex[ch] == LEX_IS_COLON)
{
/* Only keep this white if there's no white *after* the
colon. */
ch2 = GET ();
UNGET (ch2);
if (!IS_WHITESPACE (ch2))
{
state = 9;
UNGET (ch);
PUT (' ');
break;
}
}
#endif
if (IS_COMMENT (ch)
|| ch == '/'
|| IS_LINE_SEPARATOR (ch)
|| IS_PARALLEL_SEPARATOR (ch))
{
if (scrub_m68k_mri)
{
/* In MRI mode, we keep these spaces. */
UNGET (ch);
PUT (' ');
break;
}
goto recycle;
}
/* If we're in state 2 or 11, we've seen a non-white
character followed by whitespace. If the next character
is ':', this is whitespace after a label name which we
normally must ignore. In MRI mode, though, spaces are
not permitted between the label and the colon. */
if ((state == 2 || state == 11)
&& lex[ch] == LEX_IS_COLON
&& ! scrub_m68k_mri)
{
state = 1;
PUT (ch);
break;
}
switch (state)
{
case 0:
state++;
goto recycle; /* Punted leading sp */
case 1:
/* We can arrive here if we leave a leading whitespace
character at the beginning of a line. */
goto recycle;
case 2:
state = 3;
if (to + 1 < toend)
{
/* Optimize common case by skipping UNGET/GET. */
PUT (' '); /* Sp after opco */
goto recycle;
}
UNGET (ch);
PUT (' ');
break;
case 3:
if (scrub_m68k_mri)
{
/* In MRI mode, we keep these spaces. */
UNGET (ch);
PUT (' ');
break;
}
goto recycle; /* Sp in operands */
case 9:
case 10:
if (scrub_m68k_mri)
{
/* In MRI mode, we keep these spaces. */
state = 3;
UNGET (ch);
PUT (' ');
break;
}
state = 10; /* Sp after symbol char */
goto recycle;
case 11:
if (LABELS_WITHOUT_COLONS || flag_m68k_mri)
state = 1;
else
{
/* We know that ch is not ':', since we tested that
case above. Therefore this is not a label, so it
must be the opcode, and we've just seen the
whitespace after it. */
state = 3;
}
UNGET (ch);
PUT (' '); /* Sp after label definition. */
break;
default:
BAD_CASE (state);
}
break;
case LEX_IS_TWOCHAR_COMMENT_1ST:
ch2 = GET ();
if (ch2 == '*')
{
for (;;)
{
do
{
ch2 = GET ();
if (ch2 != EOF && IS_NEWLINE (ch2))
add_newlines++;
}
while (ch2 != EOF && ch2 != '*');
while (ch2 == '*')
ch2 = GET ();
if (ch2 == EOF || ch2 == '/')
break;
/* This UNGET will ensure that we count newlines
correctly. */
UNGET (ch2);
}
if (ch2 == EOF)
as_warn (_("end of file in multiline comment"));
ch = ' ';
goto recycle;
}
#ifdef DOUBLESLASH_LINE_COMMENTS
else if (ch2 == '/')
{
do
{
ch = GET ();
}
while (ch != EOF && !IS_NEWLINE (ch));
if (ch == EOF)
as_warn ("end of file in comment; newline inserted");
state = 0;
PUT ('\n');
break;
}
#endif
else
{
if (ch2 != EOF)
UNGET (ch2);
if (state == 9 || state == 10)
state = 3;
PUT (ch);
}
break;
case LEX_IS_STRINGQUOTE:
if (state == 10)
{
/* Preserve the whitespace in foo "bar". */
UNGET (ch);
state = 3;
PUT (' ');
/* PUT didn't jump out. We could just break, but we
know what will happen, so optimize a bit. */
ch = GET ();
old_state = 3;
}
else if (state == 9)
old_state = 3;
else
old_state = state;
state = 5;
PUT (ch);
break;
#ifndef IEEE_STYLE
case LEX_IS_ONECHAR_QUOTE:
if (state == 10)
{
/* Preserve the whitespace in foo 'b'. */
UNGET (ch);
state = 3;
PUT (' ');
break;
}
ch = GET ();
if (ch == EOF)
{
as_warn (_("end of file after a one-character quote; \\0 inserted"));
ch = 0;
}
if (ch == '\\')
{
ch = GET ();
if (ch == EOF)
{
as_warn (_("end of file in escape character"));
ch = '\\';
}
else
ch = process_escape (ch);
}
sprintf (out_buf, "%d", (int) (unsigned char) ch);
/* None of these 'x constants for us. We want 'x'. */
if ((ch = GET ()) != '\'')
{
#ifdef REQUIRE_CHAR_CLOSE_QUOTE
as_warn (_("missing close quote; (assumed)"));
#else
if (ch != EOF)
UNGET (ch);
#endif
}
if (strlen (out_buf) == 1)
{
PUT (out_buf[0]);
break;
}
if (state == 9)
old_state = 3;
else
old_state = state;
state = -1;
out_string = out_buf;
PUT (*out_string++);
break;
#endif
case LEX_IS_COLON:
#ifdef KEEP_WHITE_AROUND_COLON
state = 9;
#else
if (state == 9 || state == 10)
state = 3;
else if (state != 3)
state = 1;
#endif
PUT (ch);
break;
case LEX_IS_NEWLINE:
/* Roll out a bunch of newlines from inside comments, etc. */
if (add_newlines)
{
--add_newlines;
UNGET (ch);
}
/* Fall through. */
case LEX_IS_LINE_SEPARATOR:
state = 0;
PUT (ch);
break;
case LEX_IS_PARALLEL_SEPARATOR:
state = 1;
PUT (ch);
break;
#ifdef TC_V850
case LEX_IS_DOUBLEDASH_1ST:
ch2 = GET ();
if (ch2 != '-')
{
UNGET (ch2);
goto de_fault;
}
/* Read and skip to end of line. */
do
{
ch = GET ();
}
while (ch != EOF && ch != '\n');
if (ch == EOF)
as_warn (_("end of file in comment; newline inserted"));
state = 0;
PUT ('\n');
break;
#endif
#ifdef DOUBLEBAR_PARALLEL
case LEX_IS_DOUBLEBAR_1ST:
ch2 = GET ();
UNGET (ch2);
if (ch2 != '|')
goto de_fault;
/* Handle '||' in two states as invoking PUT twice might
result in the first one jumping out of this loop. We'd
then lose track of the state and one '|' char. */
state = 13;
PUT ('|');
break;
#endif
case LEX_IS_LINE_COMMENT_START:
/* FIXME-someday: The two character comment stuff was badly
thought out. On i386, we want '/' as line comment start
AND we want C style comments. hence this hack. The
whole lexical process should be reworked. xoxorich. */
if (ch == '/')
{
ch2 = GET ();
if (ch2 == '*')
{
old_state = 3;
state = -2;
break;
}
else
{
UNGET (ch2);
}
}
if (state == 0 || state == 1) /* Only comment at start of line. */
{
int startch;
startch = ch;
do
{
ch = GET ();
}
while (ch != EOF && IS_WHITESPACE (ch));
if (ch == EOF)
{
as_warn (_("end of file in comment; newline inserted"));
PUT ('\n');
break;
}
if (ch < '0' || ch > '9' || state != 0 || startch != '#')
{
/* Not a cpp line. */
while (ch != EOF && !IS_NEWLINE (ch))
ch = GET ();
if (ch == EOF)
as_warn (_("end of file in comment; newline inserted"));
state = 0;
PUT ('\n');
break;
}
/* Looks like `# 123 "filename"' from cpp. */
UNGET (ch);
old_state = 4;
state = -1;
if (scrub_m68k_mri)
out_string = "\tappline ";
else
out_string = "\t.appline ";
PUT (*out_string++);
break;
}
#ifdef TC_D10V
/* All insns end in a char for which LEX_IS_SYMBOL_COMPONENT is true.
Trap is the only short insn that has a first operand that is
neither register nor label.
We must prevent exef0f ||trap #1 to degenerate to exef0f ||trap#1 .
We can't make '#' LEX_IS_SYMBOL_COMPONENT because it is
already LEX_IS_LINE_COMMENT_START. However, it is the
only character in line_comment_chars for d10v, hence we
can recognize it as such. */
/* An alternative approach would be to reset the state to 1 when
we see '||', '<'- or '->', but that seems to be overkill. */
if (state == 10)
PUT (' ');
#endif
/* We have a line comment character which is not at the
start of a line. If this is also a normal comment
character, fall through. Otherwise treat it as a default
character. */
if (strchr (tc_comment_chars, ch) == NULL
&& (! scrub_m68k_mri
|| (ch != '!' && ch != '*')))
goto de_fault;
if (scrub_m68k_mri
&& (ch == '!' || ch == '*' || ch == '#')
&& state != 1
&& state != 10)
goto de_fault;
/* Fall through. */
case LEX_IS_COMMENT_START:
#if defined TC_ARM && defined OBJ_ELF
/* On the ARM, `@' is the comment character.
Unfortunately this is also a special character in ELF .symver
directives (and .type, though we deal with those another way).
So we check if this line is such a directive, and treat
the character as default if so. This is a hack. */
if ((symver_state != NULL) && (*symver_state == 0))
goto de_fault;
#endif
#ifdef WARN_COMMENTS
if (!found_comment)
as_where (&found_comment_file, &found_comment);
#endif
do
{
ch = GET ();
}
while (ch != EOF && !IS_NEWLINE (ch));
if (ch == EOF)
as_warn (_("end of file in comment; newline inserted"));
state = 0;
PUT ('\n');
break;
case LEX_IS_SYMBOL_COMPONENT:
if (state == 10)
{
/* This is a symbol character following another symbol
character, with whitespace in between. We skipped
the whitespace earlier, so output it now. */
UNGET (ch);
state = 3;
PUT (' ');
break;
}
if (state == 3)
state = 9;
/* This is a common case. Quickly copy CH and all the
following symbol component or normal characters. */
if (to + 1 < toend
&& mri_state == NULL
#if defined TC_ARM && defined OBJ_ELF
&& symver_state == NULL
#endif
)
{
char *s;
int len;
for (s = from; s < fromend; s++)
{
int type;
ch2 = *(unsigned char *) s;
type = lex[ch2];
if (type != 0
&& type != LEX_IS_SYMBOL_COMPONENT)
break;
}
if (s > from)
/* Handle the last character normally, for
simplicity. */
--s;
len = s - from;
if (len > (toend - to) - 1)
len = (toend - to) - 1;
if (len > 0)
{
PUT (ch);
if (len > 8)
{
memcpy (to, from, len);
to += len;
from += len;
}
else
{
switch (len)
{
case 8: *to++ = *from++;
case 7: *to++ = *from++;
case 6: *to++ = *from++;
case 5: *to++ = *from++;
case 4: *to++ = *from++;
case 3: *to++ = *from++;
case 2: *to++ = *from++;
case 1: *to++ = *from++;
}
}
ch = GET ();
}
}
/* Fall through. */
default:
de_fault:
/* Some relatively `normal' character. */
if (state == 0)
{
if (IS_SYMBOL_COMPONENT (ch))
state = 11; /* Now seeing label definition. */
}
else if (state == 1)
{
if (IS_SYMBOL_COMPONENT (ch))
state = 2; /* Ditto. */
}
else if (state == 9)
{
if (!IS_SYMBOL_COMPONENT (ch))
state = 3;
}
else if (state == 10)
{
if (ch == '\\')
{
/* Special handling for backslash: a backslash may
be the beginning of a formal parameter (of a
macro) following another symbol character, with
whitespace in between. If that is the case, we
output a space before the parameter. Strictly
speaking, correct handling depends upon what the
macro parameter expands into; if the parameter
expands into something which does not start with
an operand character, then we don't want to keep
the space. We don't have enough information to
make the right choice, so here we are making the
choice which is more likely to be correct. */
PUT (' ');
}
state = 3;
}
PUT (ch);
break;
}
}
/*NOTREACHED*/
fromeof:
/* We have reached the end of the input. */
return to - tostart;
tofull:
/* The output buffer is full. Save any input we have not yet
processed. */
if (fromend > from)
{
saved_input = from;
saved_input_len = fromend - from;
}
else
saved_input = NULL;
return to - tostart;
}
Reference in New Issue View Git Blame Copy Permalink