binutils-gdb/gdb/testsuite/gdb.base/selftest.exp

446 lines
13 KiB
Plaintext

# Copyright (C) 1988, 1990, 1991, 1992, 1994, 1997 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
# Please email any bugs, comments, and/or additions to this file to:
# bug-gdb@prep.ai.mit.edu
# This file was written by Rob Savoye. (rob@cygnus.com)
if $tracelevel then {
strace $tracelevel
}
set prms_id 0
set bug_id 0
# are we on a target board
if [is_remote target] {
return
}
if [istarget "m68k*-*-hpux*"] then {
# The top-level makefile passes CFLAGS= (no -g) for hp300. This probably
# should be fixed (it is only needed for gcc bootstrapping, not gdb),
# but until then.....
setup_xfail "*-*-*"
fail "cannot test self if compiled without debug info"
return -1
}
# Not all of the lines of code near the start of main are executed for
# every machine. Also, optimization may reorder some of the lines.
# So all we do is try to step or next over everything until we get
# to a line that we know is always executed.
proc do_steps_and_nexts {} {
global gdb_prompt
global srcdir
gdb_reinitialize_dir $srcdir/..
for {set count 0} {$count < 22} {incr count} {
send_gdb "list\n"
gdb_expect {
-re ".*context = data.*$gdb_prompt $" {
set description "step over context initialization"
set command "step"
}
-re ".*argc = context->argc.*$gdb_prompt $" {
set description "step over argc initialization"
set command "step"
}
-re ".*argv = context->argv.*$gdb_prompt $" {
set description "step over argv initialization"
set command "step"
}
-re ".*quiet = 0.*$gdb_prompt $" {
set description "step over quiet initialization"
set command "step"
}
-re ".*batch = 0.*$gdb_prompt $" {
set description "step over batch initialization"
set command "step"
}
-re ".*symarg = NULL.*$gdb_prompt $" {
set description "step over symarg initialization"
set command "step"
}
-re ".*execarg = NULL.*$gdb_prompt $" {
set description "step over execarg initialization"
set command "step"
}
-re ".*corearg = NULL.*$gdb_prompt $" {
set description "step over corearg initialization"
set command "step"
}
-re ".*cdarg = NULL.*$gdb_prompt $" {
set description "step over cdarg initialization"
set command "step"
}
-re ".*ttyarg = NULL.*$gdb_prompt $" {
set description "step over ttyarg initialization"
set command "step"
}
-re ".*time_at_startup = get_run_time.*$gdb_prompt $" {
set description "next over get_run_time and everything it calls"
set command "next"
}
-re ".*START_PROGRESS.*$gdb_prompt $" {
set description "next over START_PROGRESS and everything it calls"
set command "next"
}
-re ".*mac_init.*$gdb_prompt $" {
set description "next over mac_init and everything it calls"
set command "next"
}
-re ".*init_malloc.*$gdb_prompt $" {
set description "next over init_malloc and everything it calls"
set command "next"
}
-re ".*count . 0x3.*$gdb_prompt $" {
set description "next over conditional stack alignment code 1"
set command "next"
}
-re ".*if .i != 0.*$gdb_prompt $" {
set description "next over conditional stack alignment code 2"
set command "next"
}
-re ".*alloca .i - 4.*$gdb_prompt $" {
set description "next over conditional stack alignment alloca"
set command "next"
}
-re ".*cmdsize = 1.*$gdb_prompt $" {
set description "step over cmdsize initialization"
set command "next"
}
-re ".*cmdarg = .* xmalloc.*$gdb_prompt $" {
set description "next over cmdarg initialization via xmalloc"
set command "next"
}
-re ".*ncmd = 0.*$gdb_prompt $" {
set description "next over ncmd initialization"
set command "next"
}
-re ".*dirsize = 1.*$gdb_prompt $" {
set description "next over dirsize initialization"
set command "next"
}
-re ".*dirarg = .* xmalloc.*$gdb_prompt $" {
return
}
-re "\[ \t\]+\{\r\n$gdb_prompt $" {
setup_xfail "mips-*-irix5*"
fail "$description ended up at odd location"
}
-re ".*main.c.*No such file or directory.*$gdb_prompt $" {
setup_xfail "rs6000-*-aix3*"
fail "must be able to list source lines"
return
}
-re ".*$gdb_prompt $" {
fail "unknown source line after $description"
return
}
default {
fail "unknown source line near main"
return
}
}
send_gdb "$command\n"
gdb_expect {
-re ".*No such file or directory.\r\n$gdb_prompt $" {
fail "$description (no source available)"
}
-re ".*A file or directory .* does not exist..\r\n$gdb_prompt $" {
fail "$description (no source available)"
}
-re ".*$gdb_prompt $" {
pass "$description"
}
timeout {
fail "$description (timeout)"
}
}
}
}
proc test_with_self { executable } {
global gdb_prompt
global tool
global det_file
global decimal
global timeout
# load yourself into the debugger
# This can take a relatively long time, particularly for testing where
# the executable is being accessed over a network, or where gdb does not
# support partial symbols for a particular target and has to load the
# entire symbol table. Set the timeout to 10 minutes, which should be
# adequate for most environments (it *has* timed out with 5 min on a
# SPARCstation SLC under moderate load, so this isn't unreasonable).
# After gdb is started, set the timeout to 30 seconds for the duration
# of this test, and then back to the original value.
set oldtimeout $timeout
set timeout 600
verbose "Timeout is now $timeout seconds" 2
if {[gdb_load $executable] <0} then {
set timeout $oldtimeout
verbose "Timeout is now $timeout seconds" 2
return -1
}
set timeout $oldtimeout
verbose "Timeout is now $timeout seconds" 2
# disassemble yourself
gdb_test "x/10i main" \
"x/10i.*main.*main.$decimal.*main.$decimal.*" \
"Disassemble main"
# Set a breakpoint at main
gdb_test "break captured_main" \
"Breakpoint.*at.* file.*, line.*" \
"breakpoint in captured_main"
# We'll need this when we send a ^C to GDB. Need to do it before we
# run the program and gdb starts saving and restoring tty states.
# On Ultrix, we don't need it and it is really slow (because shell_escape
# doesn't use vfork).
if ![istarget "*-*-ultrix*"] then {
gdb_test "shell stty intr '^C'" "" \
"set interrupt character in test_with_self"
}
# FIXME: If we put this after the run to main, the first list
# command doesn't print the same line as the current line where
# gdb is stopped.
gdb_test "set listsize 1" "" "set listsize to 1"
# run yourself
# It may take a very long time for the inferior gdb to start (lynx),
# so we bump it back up for the duration of this command.
set timeout 600
set description "run until breakpoint at captured_main"
send_gdb "run -nw\n"
gdb_expect {
-re "Starting program.*Breakpoint \[0-9\]+,.*captured_main .data.* at .*main.c:.*$gdb_prompt $" {
pass "$description"
}
-re "Starting program.*Breakpoint \[0-9\]+,.*captured_main .data.*$gdb_prompt $" {
xfail "$description (line numbers scrambled?)"
}
-re "vfork: No more processes.*$gdb_prompt $" {
fail "$description (out of virtual memory)"
set timeout $oldtimeout
verbose "Timeout is now $timeout seconds" 2
return -1
}
-re ".*$gdb_prompt $" {
fail "$description"
set timeout $oldtimeout
verbose "Timeout is now $timeout seconds" 2
return -1
}
timeout {
fail "$description (timeout)"
}
}
set timeout $oldtimeout
verbose "Timeout is now $timeout seconds" 2
# do we have a version number ?
send_gdb "print version\n"
gdb_expect {
-re ".\[0-9\]+ = .\[0-9.\]+.*$gdb_prompt $" {
pass "printed version as string"
}
-re ".\[0-9\]+ = +0x.*\[0-9.\]+.*$gdb_prompt $" {
pass "printed version as pointer"
}
-re ".\[0-9\]+ = +.+ +0x.*\[0-9.\]+.*$gdb_prompt $" {
pass "printed version with cast"
}
-re ".*$gdb_prompt $" { fail "printed version" }
timeout { fail "(timeout) printed version" }
}
do_steps_and_nexts
gdb_test "print \"foo\"" ".\[0-9\]+ = \"foo\"" "print a string"
# do_steps_and_nexts left us ready to execute an xmalloc call,
# so give that a try.
# If we don't actually enter the xmalloc call when we give a
# step command that seems like a genuine bug. It seems to happen
# on most RISC processors.
setup_xfail "alpha-*-*" "mips-*-*"
set description "step into xmalloc call"
send_gdb "step\n"
gdb_expect {
-re "xmalloc.*size=.*at.*utils.c.*$gdb_prompt $" {
pass "$description"
}
-re ".*No such file or directory.\r\n$gdb_prompt $" {
pass "$description (no source available)"
}
-re "A file or directory .* does not exist..\r\n$gdb_prompt $" {
pass "$description (no source available)"
}
-re ".*$gdb_prompt $" {
fail "$description"
}
timeout {
fail "$description (timeout)"
}
}
# start the "xgdb" process
send_gdb "continue\n"
gdb_expect {
-re "GNU gdb \[0-9\.\]*.*
Copyright \[0-9\]* Free Software Foundation, Inc.*
GDB is free software, covered by the GNU General Public License, and you are.*
welcome to change it and/or distribute copies of it under certain conditions.*
Type \"show copying\" to see the conditions.*
There is absolutely no warranty for GDB. Type \"show warranty\" for details.*
This GDB was configured as .*$gdb_prompt $"\
{ pass "xgdb is at prompt" }
-re "GDB is free software and you are welcome to distribute copies of it.*
under certain conditions; type \"show copying\" to see the conditions..*
There is absolutely no warranty for GDB; type \"show warranty\" for details..*
GDB.*Copyright \[0-9\]+ Free Software Foundation, Inc..*$gdb_prompt $"\
{ pass "xgdb is at prompt (obsolescent gdb)" }
-re ".*$gdb_prompt $" { fail "xgdb is at prompt" }
timeout { fail "(timeout) xgdb is at prompt" }
}
# set xgdb prompt so we can tell which is which
send_gdb "set prompt (xgdb) \n"
gdb_expect {
-re "\[(\]xgdb\[)\].*\[(\]xgdb\[)\] $" { pass "Set xgdb prompt" }
-re ".*$gdb_prompt $" { fail "Set xgdb prompt" }
default { fail "(timeout) Set xgdb prompt" }
}
# kill the xgdb process
set description "send ^C to child process"
send_gdb "\003"
gdb_expect {
-re "Program received signal SIGINT.*$gdb_prompt $" {
pass "$description"
}
-re ".*$gdb_prompt $" {
fail "$description"
}
timeout {
fail "$description (timeout)"
}
}
set description "send SIGINT signal to child process"
send_gdb "signal SIGINT\n"
gdb_expect {
-re "Continuing with signal SIGINT.*$gdb_prompt $" {
pass "$description"
}
-re ".*$gdb_prompt $" {
fail "$description"
}
timeout {
fail "$description (timeout)"
}
}
# get a stack trace
#
# This fails on some linux systems for unknown reasons. On the
# systems where it fails, sometimes it works fine when run manually.
# The testsuite failures may not be limited to just aout systems.
setup_xfail "i*86-pc-linuxaout-gnu" "hppa*-*-hpux*"
set description "backtrace through signal handler"
send_gdb "backtrace\n"
gdb_expect {
-re "#0.*read.*in main \\(.*\\) at .*main\\.c.*$gdb_prompt $" {
pass "$description"
}
-re ".*$gdb_prompt $" {
# On the alpha, we hit the infamous problem about gdb
# being unable to get the frame pointer (mentioned in
# gdb/README). As it is intermittent, there is no way to
# XFAIL it which will give us an XPASS if the problem goes
# away.
setup_xfail "alpha*-*-osf*"
fail "$description"
}
timeout {
fail "$description (timeout)"
}
}
# Set the timeout back to the value it had when we were called.
set timeout $oldtimeout
verbose "Timeout is now $timeout seconds" 2
# Restart gdb in case next test expects it to be started already.
return 0
}
# Find a pathname to a file that we would execute if the shell was asked
# to run $arg using the current PATH.
proc find_gdb { arg } {
# If the arg directly specifies an existing executable file, then
# simply use it.
if [file executable $arg] then {
return $arg
}
set result [which $arg]
if [string match "/" [ string range $result 0 0 ]] then {
return $result
}
# If everything fails, just return the unqualified pathname as default
# and hope for best.
return $arg
}
# Run the test with self.
# Copy the file executable file in case this OS doesn't like to edit its own
# text space.
set GDB_FULLPATH [find_gdb $GDB]
# Remove any old copy lying around.
remote_file host delete x$tool
gdb_start
set file [remote_download host $GDB_FULLPATH x$tool]
set result [test_with_self $file];
gdb_exit;
catch "remote_file host delete $file";
if {$result <0} then {
warning "Couldn't test self"
return -1
}