c2e247c4ff
* signals.h: Don't undefine signals anymore. * main.c: Use job_control from serial.h. * fork-child.c (fork_inferior): Use gdb_setpgid. * serial.h, ser-unix.c, ser-go32.c: Provide gdb_setpgid. * utils.c (quit): Use current_target->to_terminal_ours to figure out whether we care about lack of job control, rather than __GO32__. * utils.c: Include serial.h not terminal.h (quit): Use job_control not TIOCGPGRP. * terminal.h: Don't undefine TIOCGPGRP. * serial.h, ser-unix.c, ser-go32.c, ser-tcp.c: Add SERIAL_FLUSH_OUTPUT. * utils.c (quit): Use it. * serial.h: Add SERIAL_UN_FDOPEN. * utils.c (quit): Use it. * ser-unix.c: Add process group to ttystate. [HAVE_SGTTY]: Add tchars, ltchars, and lmode to ttystate. * inflow.c: Include serial.h not terminal.h. Use serial.h stuff to replace most of the maze of #ifdef's. * inflow.c, main.c, inferior.h: make gdb_has_a_terminal a function. * serial.h: Document SERIAL_SET_TTY_STATE as being immediate. * ser-unix.c: Use TIOCSETN not TIOCSETP so it is true. * serial.h, ser-unix.c, ser-go32.c, ser-tcp.c: Add SERIAL_PRINT_TTY_STATE, SERIAL_NOFLUSH_SET_TTY_STATE, and SERIAL_SET_PROCESS_GROUP. * inflow.c: Use them. * config/xm-svr4.h, config/rs6000/xm-rs6000.h, config/sparc/sun4os4.h: Define HAVE_TERMIOS. * Various: Remove all use of TIOC*_BROKEN.
149 lines
5.5 KiB
C
149 lines
5.5 KiB
C
/* Remote serial support interface definitions for GDB, the GNU Debugger.
|
|
Copyright 1992, 1993 Free Software Foundation, Inc.
|
|
|
|
This file is part of GDB.
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
|
|
|
|
/* Terminal state pointer. This is specific to each type of interface. */
|
|
|
|
typedef PTR serial_ttystate;
|
|
|
|
struct _serial_t
|
|
{
|
|
int fd; /* File descriptor */
|
|
struct serial_ops *ops; /* Function vector */
|
|
serial_ttystate ttystate; /* Not used (yet) */
|
|
int bufcnt; /* Amount of data in receive buffer */
|
|
unsigned char *bufp; /* Current byte */
|
|
unsigned char buf[BUFSIZ]; /* Da buffer itself */
|
|
int current_timeout; /* (termio{s} only), last value of VTIME */
|
|
};
|
|
|
|
typedef struct _serial_t *serial_t;
|
|
|
|
struct serial_ops {
|
|
char *name;
|
|
struct serial_ops *next;
|
|
int (*open) PARAMS ((serial_t, const char *name));
|
|
void (*close) PARAMS ((serial_t));
|
|
int (*readchar) PARAMS ((serial_t, int timeout));
|
|
int (*write) PARAMS ((serial_t, const char *str, int len));
|
|
int (*flush_output) PARAMS ((serial_t));
|
|
void (*go_raw) PARAMS ((serial_t));
|
|
serial_ttystate (*get_tty_state) PARAMS ((serial_t));
|
|
int (*set_tty_state) PARAMS ((serial_t, serial_ttystate));
|
|
void (*print_tty_state) PARAMS ((serial_t, serial_ttystate));
|
|
int (*noflush_set_tty_state)
|
|
PARAMS ((serial_t, serial_ttystate, serial_ttystate));
|
|
int (*setbaudrate) PARAMS ((serial_t, int rate));
|
|
int (*set_process_group) PARAMS ((serial_t, serial_ttystate, int));
|
|
};
|
|
|
|
/* Add a new serial interface to the interface list */
|
|
|
|
void serial_add_interface PARAMS ((struct serial_ops *optable));
|
|
|
|
serial_t serial_open PARAMS ((const char *name));
|
|
|
|
serial_t serial_fdopen PARAMS ((int fd));
|
|
|
|
/* For most routines, if a failure is indicated, then errno should be
|
|
examined. */
|
|
|
|
/* Try to open NAME. Returns a new serial_t on success, NULL on failure.
|
|
*/
|
|
|
|
#define SERIAL_OPEN(NAME) serial_open(NAME)
|
|
|
|
/* Open a new serial stream using a file handle. */
|
|
|
|
#define SERIAL_FDOPEN(FD) serial_fdopen(FD)
|
|
|
|
/* Flush pending output. */
|
|
|
|
#define SERIAL_FLUSH_OUTPUT(SERIAL_T) \
|
|
((SERIAL_T)->ops->flush_output((SERIAL_T)))
|
|
|
|
/* Turn the port into raw mode. */
|
|
|
|
#define SERIAL_RAW(SERIAL_T) (SERIAL_T)->ops->go_raw((SERIAL_T))
|
|
|
|
/* Return a pointer to a newly malloc'd ttystate containing the state
|
|
of the tty. */
|
|
#define SERIAL_GET_TTY_STATE(SERIAL_T) (SERIAL_T)->ops->get_tty_state((SERIAL_T))
|
|
|
|
/* Set the state of the tty to TTYSTATE. The change is immediate.
|
|
When changing to or from raw mode, input might be discarded. */
|
|
#define SERIAL_SET_TTY_STATE(SERIAL_T, TTYSTATE) (SERIAL_T)->ops->set_tty_state((SERIAL_T), (TTYSTATE))
|
|
|
|
/* printf_filtered a user-comprehensible description of ttystate. */
|
|
#define SERIAL_PRINT_TTY_STATE(SERIAL_T, TTYSTATE) \
|
|
((*((SERIAL_T)->ops->print_tty_state)) ((SERIAL_T), (TTYSTATE)))
|
|
|
|
/* Set the tty state to NEW_TTYSTATE, where OLD_TTYSTATE is the
|
|
current state (generally obtained from a recent call to
|
|
SERIAL_GET_TTY_STATE), but be careful not to discard any input.
|
|
This means that we never switch in or out of raw mode, even
|
|
if NEW_TTYSTATE specifies a switch. */
|
|
#define SERIAL_NOFLUSH_SET_TTY_STATE(SERIAL_T, NEW_TTYSTATE, OLD_TTYSTATE) \
|
|
((*((SERIAL_T)->ops->noflush_set_tty_state)) \
|
|
((SERIAL_T), (NEW_TTYSTATE), (OLD_TTYSTATE)))
|
|
|
|
/* Read one char from the serial device with TIMEOUT seconds timeout.
|
|
Returns char if ok, else one of the following codes. Note that all
|
|
error codes are guaranteed to be < 0. */
|
|
|
|
#define SERIAL_ERROR -1 /* General error, see errno for details */
|
|
#define SERIAL_TIMEOUT -2
|
|
#define SERIAL_EOF -3
|
|
|
|
#define SERIAL_READCHAR(SERIAL_T, TIMEOUT) ((SERIAL_T)->ops->readchar((SERIAL_T), TIMEOUT))
|
|
|
|
/* Set the baudrate to the decimal value supplied. Returns 0 for success,
|
|
-1 for failure. */
|
|
|
|
#define SERIAL_SETBAUDRATE(SERIAL_T, RATE) ((SERIAL_T)->ops->setbaudrate((SERIAL_T), RATE))
|
|
|
|
/* Write LEN chars from STRING to the port SERIAL_T. Returns 0 for success,
|
|
-1 for failure. */
|
|
|
|
#define SERIAL_WRITE(SERIAL_T, STRING, LEN) ((SERIAL_T)->ops->write((SERIAL_T), STRING, LEN))
|
|
|
|
/* Push out all buffers, close the device and destroy SERIAL_T. */
|
|
|
|
void serial_close PARAMS ((serial_t));
|
|
|
|
#define SERIAL_CLOSE(SERIAL_T) serial_close(SERIAL_T)
|
|
|
|
/* Destroy SERIAL_T without doing the rest of the stuff that SERIAL_CLOSE
|
|
does. */
|
|
|
|
#define SERIAL_UN_FDOPEN(SERIAL_T) (free (SERIAL_T))
|
|
|
|
/* Set the process group saved in TTYSTATE to GROUP. This just modifies
|
|
the ttystate setting; need to call SERIAL_SET_TTY_STATE for this to
|
|
actually have any effect. If no job control, then don't do anything. */
|
|
#define SERIAL_SET_PROCESS_GROUP(SERIAL_T, TTYSTATE, GROUP) \
|
|
((*((SERIAL_T)->ops->set_process_group)) (SERIAL_T, TTYSTATE, GROUP))
|
|
|
|
/* Do we have job control? Can be assumed to always be the same within
|
|
a given run of GDB. In ser-unix.c, ser-go32.c, etc. */
|
|
extern int job_control;
|
|
|
|
/* Set the process group of the caller to its own pid, or do nothing if
|
|
we lack job control. */
|
|
extern int gdb_setpgid PARAMS ((void));
|