6131622e34
enable/disable_breakpoint_hook with modify_breakpoint_hook. * gdbtk.c: General cleanups, get rid of unused variables. Redo handling of stdout/stderr to just return output as the result of the tcl command that caused the output. Cleanup -Wall stuff. * (breakpoint_notify): Now returns just action and breakpoint number. * (gdb_get_breakpoint_list): New routine. Does the obvious. * (gdb_get_breakpoint_info): Mostly derived from the old breakpoint_notify, but returns lots more info. * (dsprintf_append_element): Helper routine, works like printf, but appends a tcl element onto the specified DString. Good for building up lists as return values. * (gdbtk_enable/disable_breakpoint): Go away. Replaced with gdbtk_modify_breakpoint. * (*many routines*): Use new result protocol. * (call_wrapper): Make sure that recursive calls don't trash results. * gdbtk.tcl: New windows, autocmd, and breakpoints. * (gdbtk_tcl_fputs): Don't use $current_output_win redirection anymore. It's not needed (in fact, this routine may not be needed anymore). * (gdbtk_tcl_breakpoint): Change to reflect new breakpoint notification protocol. * (gdbtk_tcl_busy gdbtk_tcl_idle): Straighten out buttons, remove catches. * (interactive_cmd): Use this wrapper around button invocations of many commands. This will catch errors and put the results into the command window. It also updates all the other windows. * Also, change reliefs of most things to sunken. This actually looks better. * (create_file_win): Fix margin binding to allow breakpoints to work again. * (create_asm_win): Use return value of gdb_disassemble instead of implicit I/O to the command window. * (create_command_window): Use new result protocol to get output from commands.
2920 lines
74 KiB
Tcl
2920 lines
74 KiB
Tcl
# GDB GUI setup for GDB, the GNU debugger.
|
|
# Copyright 1994, 1995
|
|
# Free Software Foundation, Inc.
|
|
|
|
# Written by Stu Grossman <grossman@cygnus.com> of Cygnus Support.
|
|
|
|
# This file is part of GDB.
|
|
|
|
# This program is free software; you can redistribute it and/or modify
|
|
# it under the terms of the GNU General Public License as published by
|
|
# the Free Software Foundation; either version 2 of the License, or
|
|
# (at your option) any later version.
|
|
|
|
# This program is distributed in the hope that it will be useful,
|
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
# GNU General Public License for more details.
|
|
|
|
# You should have received a copy of the GNU General Public License
|
|
# along with this program; if not, write to the Free Software
|
|
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
|
|
|
|
set cfile Blank
|
|
set wins($cfile) .src.text
|
|
set current_label {}
|
|
set screen_height 0
|
|
set screen_top 0
|
|
set screen_bot 0
|
|
set cfunc NIL
|
|
set line_numbers 1
|
|
set breakpoint_file(-1) {[garbage]}
|
|
set disassemble_with_source nosource
|
|
set expr_update_list(0) 0
|
|
|
|
#option add *Foreground Black
|
|
#option add *Background White
|
|
#option add *Font -*-*-medium-r-normal--18-*-*-*-m-*-*-1
|
|
tk colormodel . monochrome
|
|
|
|
proc echo string {puts stdout $string}
|
|
|
|
if [info exists env(EDITOR)] then {
|
|
set editor $env(EDITOR)
|
|
} else {
|
|
set editor emacs
|
|
}
|
|
|
|
# GDB callbacks
|
|
#
|
|
# These functions are called by GDB (from C code) to do various things in
|
|
# TK-land. All start with the prefix `gdbtk_tcl_' to make them easy to find.
|
|
#
|
|
|
|
#
|
|
# GDB Callback:
|
|
#
|
|
# gdbtk_tcl_fputs (text) - Output text to the command window
|
|
#
|
|
# Description:
|
|
#
|
|
# GDB calls this to output TEXT to the GDB command window. The text is
|
|
# placed at the end of the text widget. Note that output may not occur,
|
|
# due to buffering. Use gdbtk_tcl_flush to cause an immediate update.
|
|
#
|
|
|
|
proc gdbtk_tcl_fputs {arg} {
|
|
.cmd.text insert end "$arg"
|
|
.cmd.text yview -pickplace end
|
|
}
|
|
|
|
proc gdbtk_tcl_fputs_error {arg} {
|
|
.cmd.text insert end "$arg"
|
|
.cmd.text yview -pickplace end
|
|
}
|
|
|
|
#
|
|
# GDB Callback:
|
|
#
|
|
# gdbtk_tcl_flush () - Flush output to the command window
|
|
#
|
|
# Description:
|
|
#
|
|
# GDB calls this to force all buffered text to the GDB command window.
|
|
#
|
|
|
|
proc gdbtk_tcl_flush {} {
|
|
.cmd.text yview -pickplace end
|
|
update idletasks
|
|
}
|
|
|
|
#
|
|
# GDB Callback:
|
|
#
|
|
# gdbtk_tcl_query (message) - Create a yes/no query dialog box
|
|
#
|
|
# Description:
|
|
#
|
|
# GDB calls this to create a yes/no dialog box containing MESSAGE. GDB
|
|
# is hung while the dialog box is active (ie: no commands will work),
|
|
# however windows can still be refreshed in case of damage or exposure.
|
|
#
|
|
|
|
proc gdbtk_tcl_query {message} {
|
|
tk_dialog .query "gdb : query" "$message" {} 1 "No" "Yes"
|
|
}
|
|
|
|
#
|
|
# GDB Callback:
|
|
#
|
|
# gdbtk_start_variable_annotation (args ...) -
|
|
#
|
|
# Description:
|
|
#
|
|
# Not yet implemented.
|
|
#
|
|
|
|
proc gdbtk_tcl_start_variable_annotation {valaddr ref_type stor_cl cum_expr field type_cast} {
|
|
echo "gdbtk_tcl_start_variable_annotation $valaddr $ref_type $stor_cl $cum_expr $field $type_cast"
|
|
}
|
|
|
|
#
|
|
# GDB Callback:
|
|
#
|
|
# gdbtk_end_variable_annotation (args ...) -
|
|
#
|
|
# Description:
|
|
#
|
|
# Not yet implemented.
|
|
#
|
|
|
|
proc gdbtk_tcl_end_variable_annotation {} {
|
|
echo gdbtk_tcl_end_variable_annotation
|
|
}
|
|
|
|
#
|
|
# GDB Callback:
|
|
#
|
|
# gdbtk_tcl_breakpoint (action bpnum file line) - Notify the TK
|
|
# interface of changes to breakpoints.
|
|
#
|
|
# Description:
|
|
#
|
|
# GDB calls this to notify TK of changes to breakpoints. ACTION is one
|
|
# of:
|
|
# create - Notify of breakpoint creation
|
|
# delete - Notify of breakpoint deletion
|
|
# modify - Notify of breakpoint modification
|
|
#
|
|
|
|
# file line pc type enabled disposition silent ignore_count commands cond_string thread hit_count
|
|
|
|
proc gdbtk_tcl_breakpoint {action bpnum} {
|
|
set bpinfo [gdb_get_breakpoint_info $bpnum]
|
|
set file [lindex $bpinfo 0]
|
|
set line [lindex $bpinfo 1]
|
|
set pc [lindex $bpinfo 2]
|
|
set enable [lindex $bpinfo 4]
|
|
|
|
if {$action == "modify"} {
|
|
if {$enable == "enabled"} {
|
|
set action enable
|
|
} else {
|
|
set action disable
|
|
}
|
|
}
|
|
|
|
${action}_breakpoint $bpnum $file $line $pc
|
|
}
|
|
|
|
proc create_breakpoints_window {} {
|
|
global bpframe_lasty
|
|
|
|
if [winfo exists .breakpoints] {raise .breakpoints ; return}
|
|
|
|
build_framework .breakpoints "Breakpoints" ""
|
|
|
|
# First, delete all the old view menu entries
|
|
|
|
.breakpoints.menubar.view.menu delete 0 last
|
|
|
|
# Get rid of label
|
|
|
|
destroy .breakpoints.label
|
|
|
|
# Replace text with a canvas and fix the scrollbars
|
|
|
|
destroy .breakpoints.text
|
|
canvas .breakpoints.c -relief sunken -bd 2 \
|
|
-cursor hand2 -yscrollcommand {.breakpoints.scroll set}
|
|
.breakpoints.scroll configure -command {.breakpoints.c yview}
|
|
scrollbar .breakpoints.scrollx -orient horizontal \
|
|
-command {.breakpoints.c xview} -relief sunken
|
|
|
|
pack .breakpoints.scrollx -side bottom -fill x -in .breakpoints.info
|
|
pack .breakpoints.c -side left -expand yes -fill both \
|
|
-in .breakpoints.info
|
|
|
|
set bpframe_lasty 0
|
|
|
|
# Create a frame for each breakpoint
|
|
|
|
foreach bpnum [gdb_get_breakpoint_list] {
|
|
add_breakpoint_frame $bpnum
|
|
}
|
|
}
|
|
|
|
# Create a frame for bpnum in the .breakpoints canvas
|
|
|
|
proc add_breakpoint_frame bpnum {
|
|
global bpframe_lasty
|
|
|
|
if ![winfo exists .breakpoints] return
|
|
|
|
set bpinfo [gdb_get_breakpoint_info $bpnum]
|
|
|
|
set file [lindex $bpinfo 0]
|
|
set line [lindex $bpinfo 1]
|
|
set pc [lindex $bpinfo 2]
|
|
set type [lindex $bpinfo 3]
|
|
set enabled [lindex $bpinfo 4]
|
|
set disposition [lindex $bpinfo 5]
|
|
set silent [lindex $bpinfo 6]
|
|
set ignore_count [lindex $bpinfo 7]
|
|
set commands [lindex $bpinfo 8]
|
|
set cond [lindex $bpinfo 9]
|
|
set thread [lindex $bpinfo 10]
|
|
set hit_count [lindex $bpinfo 11]
|
|
|
|
set f .breakpoints.c.$bpnum
|
|
|
|
if ![winfo exists $f] {
|
|
frame $f -relief sunken -bd 2
|
|
|
|
label $f.id -text "#$bpnum $file:$line ($pc)" \
|
|
-relief flat -bd 2 -anchor w
|
|
label $f.hit_count -text "Hit count: $hit_count" -relief flat \
|
|
-bd 2 -anchor w
|
|
|
|
frame $f.thread
|
|
label $f.thread.label -text "Thread: " -relief flat -bd 2 \
|
|
-width 11 -anchor w
|
|
entry $f.thread.entry -bd 2 -relief sunken -width 10
|
|
$f.thread.entry insert end $thread
|
|
pack $f.thread.label -side left
|
|
pack $f.thread.entry -side left -fill x
|
|
|
|
frame $f.cond
|
|
label $f.cond.label -text "Condition: " -relief flat -bd 2 \
|
|
-width 11 -anchor w
|
|
entry $f.cond.entry -bd 2 -relief sunken
|
|
$f.cond.entry insert end $cond
|
|
pack $f.cond.label -side left
|
|
pack $f.cond.entry -side left -fill x -expand yes
|
|
|
|
frame $f.ignore_count
|
|
label $f.ignore_count.label -text "Ignore count: " \
|
|
-relief flat -bd 2 -width 11 -anchor w
|
|
entry $f.ignore_count.entry -bd 2 -relief sunken -width 10
|
|
$f.ignore_count.entry insert end $ignore_count
|
|
pack $f.ignore_count.label -side left
|
|
pack $f.ignore_count.entry -side left -fill x
|
|
|
|
frame $f.disps
|
|
|
|
checkbutton $f.disps.enabled -text "Enabled " \
|
|
-variable enabled -anchor w -relief flat
|
|
|
|
radiobutton $f.disps.delete -text Delete \
|
|
-variable disposition -anchor w -relief flat
|
|
|
|
radiobutton $f.disps.disable -text Disable \
|
|
-variable disposition -anchor w -relief flat
|
|
|
|
radiobutton $f.disps.donttouch -text "Leave alone" \
|
|
-variable disposition -anchor w -relief flat
|
|
|
|
pack $f.disps.delete $f.disps.disable $f.disps.donttouch \
|
|
-side left -anchor w
|
|
pack $f.disps.enabled -side right -anchor e
|
|
text $f.commands -relief sunken -bd 2 -setgrid true \
|
|
-cursor hand2 -height 3 -width 30
|
|
|
|
foreach line $commands {
|
|
$f.commands insert end "${line}\n"
|
|
}
|
|
|
|
pack $f.id -side top -anchor nw -fill x
|
|
pack $f.hit_count $f.cond $f.thread $f.ignore_count $f.disps \
|
|
$f.commands -side top -fill x -anchor nw
|
|
}
|
|
|
|
set tag [.breakpoints.c create window 0 $bpframe_lasty -window $f -anchor nw]
|
|
update
|
|
set bbox [.breakpoints.c bbox $tag]
|
|
|
|
set bpframe_lasty [lindex $bbox 3]
|
|
}
|
|
|
|
# Delete a breakpoint frame
|
|
|
|
proc delete_breakpoint_frame bpnum {
|
|
global bpframe_lasty
|
|
|
|
if ![winfo exists .breakpoints] return
|
|
|
|
# First, clear the canvas
|
|
|
|
.breakpoints.c delete all
|
|
|
|
# Now, repopulate it with all but the doomed breakpoint
|
|
|
|
set bpframe_lasty 0
|
|
foreach bp [gdb_get_breakpoint_list] {
|
|
if {$bp != $bpnum} {
|
|
add_breakpoint_frame $bp
|
|
}
|
|
}
|
|
}
|
|
|
|
proc asm_win_name {funcname} {
|
|
if {$funcname == "*None*"} {return .asm.text}
|
|
|
|
regsub -all {\.} $funcname _ temp
|
|
|
|
return .asm.func_${temp}
|
|
}
|
|
|
|
#
|
|
# Local procedure:
|
|
#
|
|
# create_breakpoint (bpnum file line pc) - Record breakpoint info in TK land
|
|
#
|
|
# Description:
|
|
#
|
|
# GDB calls this indirectly (through gdbtk_tcl_breakpoint) to notify TK
|
|
# land of breakpoint creation. This consists of recording the file and
|
|
# line number in the breakpoint_file and breakpoint_line arrays. Also,
|
|
# if there is already a window associated with FILE, it is updated with
|
|
# a breakpoint tag.
|
|
#
|
|
|
|
proc create_breakpoint {bpnum file line pc} {
|
|
global wins
|
|
global breakpoint_file
|
|
global breakpoint_line
|
|
global pos_to_breakpoint
|
|
global pos_to_bpcount
|
|
global cfunc
|
|
global pclist
|
|
|
|
# Record breakpoint locations
|
|
|
|
set breakpoint_file($bpnum) $file
|
|
set breakpoint_line($bpnum) $line
|
|
set pos_to_breakpoint($file:$line) $bpnum
|
|
if ![info exists pos_to_bpcount($file:$line)] {
|
|
set pos_to_bpcount($file:$line) 0
|
|
}
|
|
incr pos_to_bpcount($file:$line)
|
|
set pos_to_breakpoint($pc) $bpnum
|
|
if ![info exists pos_to_bpcount($pc)] {
|
|
set pos_to_bpcount($pc) 0
|
|
}
|
|
incr pos_to_bpcount($pc)
|
|
|
|
# If there's a window for this file, update it
|
|
|
|
if [info exists wins($file)] {
|
|
insert_breakpoint_tag $wins($file) $line
|
|
}
|
|
|
|
# If there's an assembly window, update that too
|
|
|
|
set win [asm_win_name $cfunc]
|
|
if [winfo exists $win] {
|
|
insert_breakpoint_tag $win [pc_to_line $pclist($cfunc) $pc]
|
|
}
|
|
|
|
# Update the breakpoints window
|
|
|
|
add_breakpoint_frame $bpnum
|
|
}
|
|
|
|
#
|
|
# Local procedure:
|
|
#
|
|
# delete_breakpoint (bpnum file line pc) - Delete breakpoint info from TK land
|
|
#
|
|
# Description:
|
|
#
|
|
# GDB calls this indirectly (through gdbtk_tcl_breakpoint) to notify TK
|
|
# land of breakpoint destruction. This consists of removing the file and
|
|
# line number from the breakpoint_file and breakpoint_line arrays. Also,
|
|
# if there is already a window associated with FILE, the tags are removed
|
|
# from it.
|
|
#
|
|
|
|
proc delete_breakpoint {bpnum file line pc} {
|
|
global wins
|
|
global breakpoint_file
|
|
global breakpoint_line
|
|
global pos_to_breakpoint
|
|
global pos_to_bpcount
|
|
global cfunc pclist
|
|
|
|
# Save line number and file for later
|
|
|
|
set line $breakpoint_line($bpnum)
|
|
|
|
set file $breakpoint_file($bpnum)
|
|
|
|
# Reset breakpoint annotation info
|
|
|
|
if {$pos_to_bpcount($file:$line) > 0} {
|
|
decr pos_to_bpcount($file:$line)
|
|
|
|
if {$pos_to_bpcount($file:$line) == 0} {
|
|
catch "unset pos_to_breakpoint($file:$line)"
|
|
|
|
unset breakpoint_file($bpnum)
|
|
unset breakpoint_line($bpnum)
|
|
|
|
# If there's a window for this file, update it
|
|
|
|
if [info exists wins($file)] {
|
|
delete_breakpoint_tag $wins($file) $line
|
|
}
|
|
}
|
|
}
|
|
|
|
# If there's an assembly window, update that too
|
|
|
|
if {$pos_to_bpcount($pc) > 0} {
|
|
decr pos_to_bpcount($pc)
|
|
|
|
if {$pos_to_bpcount($pc) == 0} {
|
|
catch "unset pos_to_breakpoint($pc)"
|
|
|
|
set win [asm_win_name $cfunc]
|
|
if [winfo exists $win] {
|
|
delete_breakpoint_tag $win [pc_to_line $pclist($cfunc) $pc]
|
|
}
|
|
}
|
|
}
|
|
|
|
delete_breakpoint_frame $bpnum
|
|
}
|
|
|
|
#
|
|
# Local procedure:
|
|
#
|
|
# enable_breakpoint (bpnum file line pc) - Record breakpoint info in TK land
|
|
#
|
|
# Description:
|
|
#
|
|
# GDB calls this indirectly (through gdbtk_tcl_breakpoint) to notify TK
|
|
# land of a breakpoint being enabled. This consists of unstippling the
|
|
# specified breakpoint indicator.
|
|
#
|
|
|
|
proc enable_breakpoint {bpnum file line pc} {
|
|
global wins
|
|
global cfunc pclist
|
|
|
|
if [info exists wins($file)] {
|
|
$wins($file) tag configure $line -fgstipple {}
|
|
}
|
|
|
|
# If there's an assembly window, update that too
|
|
|
|
set win [asm_win_name $cfunc]
|
|
if [winfo exists $win] {
|
|
$win tag configure [pc_to_line $pclist($cfunc) $pc] -fgstipple {}
|
|
}
|
|
}
|
|
|
|
#
|
|
# Local procedure:
|
|
#
|
|
# disable_breakpoint (bpnum file line pc) - Record breakpoint info in TK land
|
|
#
|
|
# Description:
|
|
#
|
|
# GDB calls this indirectly (through gdbtk_tcl_breakpoint) to notify TK
|
|
# land of a breakpoint being disabled. This consists of stippling the
|
|
# specified breakpoint indicator.
|
|
#
|
|
|
|
proc disable_breakpoint {bpnum file line pc} {
|
|
global wins
|
|
global cfunc pclist
|
|
|
|
if [info exists wins($file)] {
|
|
$wins($file) tag configure $line -fgstipple gray50
|
|
}
|
|
|
|
# If there's an assembly window, update that too
|
|
|
|
set win [asm_win_name $cfunc]
|
|
if [winfo exists $win] {
|
|
$win tag configure [pc_to_line $pclist($cfunc) $pc] -fgstipple gray50
|
|
}
|
|
}
|
|
|
|
#
|
|
# Local procedure:
|
|
#
|
|
# insert_breakpoint_tag (win line) - Insert a breakpoint tag in WIN.
|
|
#
|
|
# Description:
|
|
#
|
|
# GDB calls this indirectly (through gdbtk_tcl_breakpoint) to insert a
|
|
# breakpoint tag into window WIN at line LINE.
|
|
#
|
|
|
|
proc insert_breakpoint_tag {win line} {
|
|
$win configure -state normal
|
|
$win delete $line.0
|
|
$win insert $line.0 "B"
|
|
$win tag add $line $line.0
|
|
$win tag add delete $line.0 "$line.0 lineend"
|
|
$win tag add margin $line.0 "$line.0 lineend"
|
|
|
|
$win configure -state disabled
|
|
}
|
|
|
|
#
|
|
# Local procedure:
|
|
#
|
|
# delete_breakpoint_tag (win line) - Remove a breakpoint tag from WIN.
|
|
#
|
|
# Description:
|
|
#
|
|
# GDB calls this indirectly (through gdbtk_tcl_breakpoint) to remove a
|
|
# breakpoint tag from window WIN at line LINE.
|
|
#
|
|
|
|
proc delete_breakpoint_tag {win line} {
|
|
$win configure -state normal
|
|
$win delete $line.0
|
|
if {[string range $win 0 3] == ".src"} then {
|
|
$win insert $line.0 "\xa4"
|
|
} else {
|
|
$win insert $line.0 " "
|
|
}
|
|
$win tag delete $line
|
|
$win tag add delete $line.0 "$line.0 lineend"
|
|
$win tag add margin $line.0 "$line.0 lineend"
|
|
$win configure -state disabled
|
|
}
|
|
|
|
proc gdbtk_tcl_busy {} {
|
|
if [winfo exists .src] {
|
|
.src.start configure -state disabled
|
|
.src.stop configure -state normal
|
|
.src.step configure -state disabled
|
|
.src.next configure -state disabled
|
|
.src.continue configure -state disabled
|
|
.src.finish configure -state disabled
|
|
.src.up configure -state disabled
|
|
.src.down configure -state disabled
|
|
.src.bottom configure -state disabled
|
|
}
|
|
if [winfo exists .asm] {
|
|
.asm.stepi configure -state disabled
|
|
.asm.nexti configure -state disabled
|
|
.asm.continue configure -state disabled
|
|
.asm.finish configure -state disabled
|
|
.asm.up configure -state disabled
|
|
.asm.down configure -state disabled
|
|
.asm.bottom configure -state disabled
|
|
}
|
|
return
|
|
}
|
|
|
|
proc gdbtk_tcl_idle {} {
|
|
if [winfo exists .src] {
|
|
.src.start configure -state normal
|
|
.src.stop configure -state disabled
|
|
.src.step configure -state normal
|
|
.src.next configure -state normal
|
|
.src.continue configure -state normal
|
|
.src.finish configure -state normal
|
|
.src.up configure -state normal
|
|
.src.down configure -state normal
|
|
.src.bottom configure -state normal
|
|
}
|
|
|
|
if [winfo exists .asm] {
|
|
.asm.stepi configure -state normal
|
|
.asm.nexti configure -state normal
|
|
.asm.continue configure -state normal
|
|
.asm.finish configure -state normal
|
|
.asm.up configure -state normal
|
|
.asm.down configure -state normal
|
|
.asm.bottom configure -state normal
|
|
}
|
|
return
|
|
}
|
|
|
|
#
|
|
# Local procedure:
|
|
#
|
|
# decr (var val) - compliment to incr
|
|
#
|
|
# Description:
|
|
#
|
|
#
|
|
proc decr {var {val 1}} {
|
|
upvar $var num
|
|
set num [expr $num - $val]
|
|
return $num
|
|
}
|
|
|
|
#
|
|
# Local procedure:
|
|
#
|
|
# pc_to_line (pclist pc) - convert PC to a line number.
|
|
#
|
|
# Description:
|
|
#
|
|
# Convert PC to a line number from PCLIST. If exact line isn't found,
|
|
# we return the first line that starts before PC.
|
|
#
|
|
proc pc_to_line {pclist pc} {
|
|
set line [lsearch -exact $pclist $pc]
|
|
|
|
if {$line >= 1} { return $line }
|
|
|
|
set line 1
|
|
foreach linepc [lrange $pclist 1 end] {
|
|
if {$pc < $linepc} { decr line ; return $line }
|
|
incr line
|
|
}
|
|
return [expr $line - 1]
|
|
}
|
|
|
|
#
|
|
# Menu:
|
|
#
|
|
# file popup menu - Define the file popup menu.
|
|
#
|
|
# Description:
|
|
#
|
|
# This menu just contains a bunch of buttons that do various things to
|
|
# the line under the cursor.
|
|
#
|
|
# Items:
|
|
#
|
|
# Edit - Run the editor (specified by the environment variable EDITOR) on
|
|
# this file, at the current line.
|
|
# Breakpoint - Set a breakpoint at the current line. This just shoves
|
|
# a `break' command at GDB with the appropriate file and line
|
|
# number. Eventually, GDB calls us back (at gdbtk_tcl_breakpoint)
|
|
# to notify us of where the breakpoint needs to show up.
|
|
#
|
|
|
|
menu .file_popup -cursor hand2
|
|
.file_popup add command -label "Not yet set" -state disabled
|
|
.file_popup add separator
|
|
.file_popup add command -label "Edit" -command {exec $editor +$selected_line $selected_file &}
|
|
.file_popup add command -label "Set breakpoint" -command {gdb_cmd "break $selected_file:$selected_line"}
|
|
|
|
# Use this procedure to get the GDB core to execute the string `cmd'. This is
|
|
# a wrapper around gdb_cmd, which will catch errors, and send output to the
|
|
# command window. It will also cause all of the other windows to be updated.
|
|
|
|
proc interactive_cmd {cmd} {
|
|
catch {gdb_cmd "$cmd"} result
|
|
.cmd.text insert end $result
|
|
.cmd.text yview -pickplace end
|
|
update_ptr
|
|
}
|
|
|
|
#
|
|
# Bindings:
|
|
#
|
|
# file popup menu - Define the file popup menu bindings.
|
|
#
|
|
# Description:
|
|
#
|
|
# This defines the binding for the file popup menu. Currently, there is
|
|
# only one, which is activated when Button-1 is released. This causes
|
|
# the menu to be unposted, releases the grab for the menu, and then
|
|
# unhighlights the line under the cursor. After that, the selected menu
|
|
# item is invoked.
|
|
#
|
|
|
|
bind .file_popup <Any-ButtonRelease-1> {
|
|
global selected_win
|
|
|
|
# First, remove the menu, and release the pointer
|
|
|
|
.file_popup unpost
|
|
grab release .file_popup
|
|
|
|
# Unhighlight the selected line
|
|
|
|
$selected_win tag delete breaktag
|
|
|
|
# Actually invoke the menubutton here!
|
|
|
|
tk_invokeMenu %W
|
|
}
|
|
|
|
#
|
|
# Local procedure:
|
|
#
|
|
# file_popup_menu (win x y xrel yrel) - Popup the file popup menu.
|
|
#
|
|
# Description:
|
|
#
|
|
# This procedure is invoked as a result of a command binding in the
|
|
# listing window. It does several things:
|
|
# o - It highlights the line under the cursor.
|
|
# o - It pops up the file popup menu which is intended to do
|
|
# various things to the aforementioned line.
|
|
# o - Grabs the mouse for the file popup menu.
|
|
#
|
|
|
|
# Button 1 has been pressed in a listing window. Pop up a menu.
|
|
|
|
proc file_popup_menu {win x y xrel yrel} {
|
|
global wins
|
|
global win_to_file
|
|
global file_to_debug_file
|
|
global highlight
|
|
global selected_line
|
|
global selected_file
|
|
global selected_win
|
|
|
|
# Map TK window name back to file name.
|
|
|
|
set file $win_to_file($win)
|
|
|
|
set pos [$win index @$xrel,$yrel]
|
|
|
|
# Record selected file and line for menu button actions
|
|
|
|
set selected_file $file_to_debug_file($file)
|
|
set selected_line [lindex [split $pos .] 0]
|
|
set selected_win $win
|
|
|
|
# Highlight the selected line
|
|
|
|
eval $win tag config breaktag $highlight
|
|
$win tag add breaktag "$pos linestart" "$pos linestart + 1l"
|
|
|
|
# Post the menu near the pointer, (and grab it)
|
|
|
|
.file_popup entryconfigure 0 -label "$selected_file:$selected_line"
|
|
.file_popup post [expr $x-[winfo width .file_popup]/2] [expr $y-10]
|
|
grab .file_popup
|
|
}
|
|
|
|
#
|
|
# Local procedure:
|
|
#
|
|
# listing_window_button_1 (win x y xrel yrel) - Handle button 1 in listing window
|
|
#
|
|
# Description:
|
|
#
|
|
# This procedure is invoked as a result of holding down button 1 in the
|
|
# listing window. The action taken depends upon where the button was
|
|
# pressed. If it was in the left margin (the breakpoint column), it
|
|
# sets or clears a breakpoint. In the main text area, it will pop up a
|
|
# menu.
|
|
#
|
|
|
|
proc listing_window_button_1 {win x y xrel yrel} {
|
|
global wins
|
|
global win_to_file
|
|
global file_to_debug_file
|
|
global highlight
|
|
global selected_line
|
|
global selected_file
|
|
global selected_win
|
|
global pos_to_breakpoint
|
|
|
|
# Map TK window name back to file name.
|
|
|
|
set file $win_to_file($win)
|
|
|
|
set pos [split [$win index @$xrel,$yrel] .]
|
|
|
|
# Record selected file and line for menu button actions
|
|
|
|
set selected_file $file_to_debug_file($file)
|
|
set selected_line [lindex $pos 0]
|
|
set selected_col [lindex $pos 1]
|
|
set selected_win $win
|
|
|
|
# If we're in the margin, then toggle the breakpoint
|
|
|
|
if {$selected_col < 8} {
|
|
set pos_break $selected_file:$selected_line
|
|
set pos $file:$selected_line
|
|
set tmp pos_to_breakpoint($pos)
|
|
if [info exists $tmp] {
|
|
set bpnum [set $tmp]
|
|
gdb_cmd "delete $bpnum"
|
|
} else {
|
|
gdb_cmd "break $pos_break"
|
|
}
|
|
return
|
|
}
|
|
|
|
# Post the menu near the pointer, (and grab it)
|
|
|
|
.file_popup entryconfigure 0 -label "$selected_file:$selected_line"
|
|
.file_popup post [expr $x-[winfo width .file_popup]/2] [expr $y-10]
|
|
grab .file_popup
|
|
}
|
|
|
|
#
|
|
# Local procedure:
|
|
#
|
|
# asm_window_button_1 (win x y xrel yrel) - Handle button 1 in asm window
|
|
#
|
|
# Description:
|
|
#
|
|
# This procedure is invoked as a result of holding down button 1 in the
|
|
# assembly window. The action taken depends upon where the button was
|
|
# pressed. If it was in the left margin (the breakpoint column), it
|
|
# sets or clears a breakpoint. In the main text area, it will pop up a
|
|
# menu.
|
|
#
|
|
|
|
proc asm_window_button_1 {win x y xrel yrel} {
|
|
global wins
|
|
global win_to_file
|
|
global file_to_debug_file
|
|
global highlight
|
|
global selected_line
|
|
global selected_file
|
|
global selected_win
|
|
global pos_to_breakpoint
|
|
global pclist
|
|
global cfunc
|
|
|
|
set pos [split [$win index @$xrel,$yrel] .]
|
|
|
|
# Record selected file and line for menu button actions
|
|
|
|
set selected_line [lindex $pos 0]
|
|
set selected_col [lindex $pos 1]
|
|
set selected_win $win
|
|
|
|
# Figure out the PC
|
|
|
|
set pc [lindex $pclist($cfunc) $selected_line]
|
|
|
|
# If we're in the margin, then toggle the breakpoint
|
|
|
|
if {$selected_col < 11} {
|
|
set tmp pos_to_breakpoint($pc)
|
|
if [info exists $tmp] {
|
|
set bpnum [set $tmp]
|
|
gdb_cmd "delete $bpnum"
|
|
} else {
|
|
gdb_cmd "break *$pc"
|
|
}
|
|
return
|
|
}
|
|
|
|
# Post the menu near the pointer, (and grab it)
|
|
|
|
# .file_popup entryconfigure 0 -label "$selected_file:$selected_line"
|
|
# .file_popup post [expr $x-[winfo width .file_popup]/2] [expr $y-10]
|
|
# grab .file_popup
|
|
}
|
|
|
|
#
|
|
# Local procedure:
|
|
#
|
|
# do_nothing - Does absolutely nothing.
|
|
#
|
|
# Description:
|
|
#
|
|
# This procedure does nothing. It is used as a placeholder to allow
|
|
# the disabling of bindings that would normally be inherited from the
|
|
# parent widget. I can't think of any other way to do this.
|
|
#
|
|
|
|
proc do_nothing {} {}
|
|
|
|
#
|
|
# Local procedure:
|
|
#
|
|
# not_implemented_yet - warn that a feature is unavailable
|
|
#
|
|
# Description:
|
|
#
|
|
# This procedure warns that something doesn't actually work yet.
|
|
#
|
|
|
|
proc not_implemented_yet {message} {
|
|
tk_dialog .unimpl "gdb : unimpl" \
|
|
"$message: not implemented in the interface yet" \
|
|
{} 1 "OK"
|
|
}
|
|
|
|
##
|
|
# Local procedure:
|
|
#
|
|
# create_expr_window - Create expression display window
|
|
#
|
|
# Description:
|
|
#
|
|
# Create the expression display window.
|
|
#
|
|
|
|
set expr_num 0
|
|
|
|
proc add_expr {expr} {
|
|
global expr_update_list
|
|
global expr_num
|
|
|
|
incr expr_num
|
|
|
|
set e .expr.e${expr_num}
|
|
|
|
frame $e
|
|
|
|
checkbutton $e.update -text " " -relief flat \
|
|
-variable expr_update_list($expr_num)
|
|
text $e.expr -width 20 -height 1
|
|
$e.expr insert 0.0 $expr
|
|
bind $e.expr <1> "update_expr $expr_num"
|
|
text $e.val -width 20 -height 1
|
|
|
|
update_expr $expr_num
|
|
|
|
pack $e.update -side left -anchor nw
|
|
pack $e.expr $e.val -side left -expand yes -fill x
|
|
|
|
pack $e -side top -fill x -anchor w
|
|
}
|
|
|
|
set delete_expr_flag 0
|
|
|
|
# This is a krock!!!
|
|
|
|
proc delete_expr {} {
|
|
global delete_expr_flag
|
|
|
|
if {$delete_expr_flag == 1} {
|
|
set delete_expr_flag 0
|
|
tk_butUp .expr.delete
|
|
bind .expr.delete <Any-Leave> {}
|
|
} else {
|
|
set delete_expr_flag 1
|
|
bind .expr.delete <Any-Leave> do_nothing
|
|
tk_butDown .expr.delete
|
|
}
|
|
}
|
|
|
|
proc update_expr {expr_num} {
|
|
global delete_expr_flag
|
|
global expr_update_list
|
|
|
|
set e .expr.e${expr_num}
|
|
|
|
if {$delete_expr_flag == 1} {
|
|
set delete_expr_flag 0
|
|
destroy $e
|
|
tk_butUp .expr.delete
|
|
tk_butLeave .expr.delete
|
|
bind .expr.delete <Any-Leave> {}
|
|
unset expr_update_list($expr_num)
|
|
return
|
|
}
|
|
|
|
set expr [$e.expr get 0.0 end]
|
|
|
|
$e.val delete 0.0 end
|
|
if [catch "gdb_eval $expr" val] {
|
|
|
|
} else {
|
|
$e.val insert 0.0 $val
|
|
}
|
|
}
|
|
|
|
proc update_exprs {} {
|
|
global expr_update_list
|
|
|
|
foreach expr_num [array names expr_update_list] {
|
|
if $expr_update_list($expr_num) {
|
|
update_expr $expr_num
|
|
}
|
|
}
|
|
}
|
|
|
|
proc create_expr_window {} {
|
|
|
|
if [winfo exists .expr] {raise .expr ; return}
|
|
|
|
toplevel .expr
|
|
wm minsize .expr 1 1
|
|
wm title .expr Expression
|
|
wm iconname .expr "Reg config"
|
|
|
|
frame .expr.entryframe
|
|
|
|
entry .expr.entry -borderwidth 2 -relief sunken
|
|
bind .expr <Enter> {focus .expr.entry}
|
|
bind .expr.entry <Key-Return> {add_expr [.expr.entry get]
|
|
.expr.entry delete 0 end }
|
|
|
|
label .expr.entrylab -text "Expression: "
|
|
|
|
pack .expr.entrylab -in .expr.entryframe -side left
|
|
pack .expr.entry -in .expr.entryframe -side left -fill x -expand yes
|
|
|
|
frame .expr.buts
|
|
|
|
button .expr.delete -text Delete
|
|
bind .expr.delete <1> delete_expr
|
|
|
|
button .expr.close -text Close -command {destroy .expr}
|
|
|
|
pack .expr.delete -side left -fill x -expand yes -in .expr.buts
|
|
pack .expr.close -side right -fill x -expand yes -in .expr.buts
|
|
|
|
pack .expr.buts -side bottom -fill x
|
|
pack .expr.entryframe -side bottom -fill x
|
|
|
|
frame .expr.labels
|
|
|
|
label .expr.updlab -text Update
|
|
label .expr.exprlab -text Expression
|
|
label .expr.vallab -text Value
|
|
|
|
pack .expr.updlab -side left -in .expr.labels
|
|
pack .expr.exprlab .expr.vallab -side left -in .expr.labels -expand yes -anchor w
|
|
|
|
pack .expr.labels -side top -fill x -anchor w
|
|
}
|
|
|
|
#
|
|
# Local procedure:
|
|
#
|
|
# display_expression (expression) - Display EXPRESSION in display window
|
|
#
|
|
# Description:
|
|
#
|
|
# Display EXPRESSION and its value in the expression display window.
|
|
#
|
|
|
|
proc display_expression {expression} {
|
|
create_expr_window
|
|
|
|
add_expr $expression
|
|
}
|
|
|
|
#
|
|
# Local procedure:
|
|
#
|
|
# create_file_win (filename) - Create a win for FILENAME.
|
|
#
|
|
# Return value:
|
|
#
|
|
# The new text widget.
|
|
#
|
|
# Description:
|
|
#
|
|
# This procedure creates a text widget for FILENAME. It returns the
|
|
# newly created widget. First, a text widget is created, and given basic
|
|
# configuration info. Second, all the bindings are setup. Third, the
|
|
# file FILENAME is read into the text widget. Fourth, margins and line
|
|
# numbers are added.
|
|
#
|
|
|
|
proc create_file_win {filename debug_file} {
|
|
global breakpoint_file
|
|
global breakpoint_line
|
|
global line_numbers
|
|
|
|
# Replace all the dirty characters in $filename with clean ones, and generate
|
|
# a unique name for the text widget.
|
|
|
|
regsub -all {\.} $filename {} temp
|
|
set win .src.text$temp
|
|
|
|
# Open the file, and read it into the text widget
|
|
|
|
if [catch "open $filename" fh] {
|
|
# File can't be read. Put error message into .src.nofile window and return.
|
|
|
|
catch {destroy .src.nofile}
|
|
text .src.nofile -height 25 -width 88 -relief sunken \
|
|
-borderwidth 2 -yscrollcommand textscrollproc \
|
|
-setgrid true -cursor hand2
|
|
.src.nofile insert 0.0 $fh
|
|
.src.nofile configure -state disabled
|
|
bind .src.nofile <1> do_nothing
|
|
bind .src.nofile <B1-Motion> do_nothing
|
|
return .src.nofile
|
|
}
|
|
|
|
# Actually create and do basic configuration on the text widget.
|
|
|
|
text $win -height 25 -width 88 -relief sunken -borderwidth 2 \
|
|
-yscrollcommand textscrollproc -setgrid true -cursor hand2
|
|
|
|
# Setup all the bindings
|
|
|
|
bind $win <Enter> {focus %W}
|
|
bind $win <1> do_nothing
|
|
bind $win <B1-Motion> do_nothing
|
|
|
|
bind $win n {interactive_cmd next}
|
|
bind $win s {interactive_cmd step}
|
|
bind $win c {interactive_cmd continue}
|
|
bind $win f {interactive_cmd finish}
|
|
bind $win u {interactive_cmd up}
|
|
bind $win d {interactive_cmd down}
|
|
|
|
$win delete 0.0 end
|
|
$win insert 0.0 [read $fh]
|
|
close $fh
|
|
|
|
# Add margins (for annotations) and a line number to each line (if requested)
|
|
|
|
set numlines [$win index end]
|
|
set numlines [lindex [split $numlines .] 0]
|
|
if $line_numbers {
|
|
for {set i 1} {$i <= $numlines} {incr i} {
|
|
$win insert $i.0 [format " %4d " $i]
|
|
$win tag add source $i.8 "$i.0 lineend"
|
|
}
|
|
} else {
|
|
for {set i 1} {$i <= $numlines} {incr i} {
|
|
$win insert $i.0 " "
|
|
$win tag add source $i.8 "$i.0 lineend"
|
|
}
|
|
}
|
|
|
|
# Add the breakdots
|
|
|
|
foreach i [gdb_sourcelines $debug_file] {
|
|
$win delete $i.0
|
|
$win insert $i.0 "\xa4"
|
|
$win tag add margin $i.0 $i.8
|
|
}
|
|
|
|
$win tag bind margin <1> {listing_window_button_1 %W %X %Y %x %y}
|
|
$win tag bind source <1> {
|
|
%W mark set anchor "@%x,%y wordstart"
|
|
set last [%W index "@%x,%y wordend"]
|
|
%W tag remove sel 0.0 anchor
|
|
%W tag remove sel $last end
|
|
%W tag add sel anchor $last
|
|
}
|
|
# $win tag bind source <Double-Button-1> {
|
|
# %W mark set anchor "@%x,%y wordstart"
|
|
# set last [%W index "@%x,%y wordend"]
|
|
# %W tag remove sel 0.0 anchor
|
|
# %W tag remove sel $last end
|
|
# %W tag add sel anchor $last
|
|
# echo "Selected [selection get]"
|
|
# }
|
|
$win tag bind source <B1-Motion> {
|
|
%W tag remove sel 0.0 anchor
|
|
%W tag remove sel $last end
|
|
%W tag add sel anchor @%x,%y
|
|
}
|
|
$win tag bind sel <1> do_nothing
|
|
$win tag bind sel <Double-Button-1> {display_expression [selection get]}
|
|
$win tag raise sel
|
|
|
|
|
|
# Scan though the breakpoint data base and install any destined for this file
|
|
|
|
foreach bpnum [array names breakpoint_file] {
|
|
if {$breakpoint_file($bpnum) == $filename} {
|
|
insert_breakpoint_tag $win $breakpoint_line($bpnum)
|
|
}
|
|
}
|
|
|
|
# Disable the text widget to prevent user modifications
|
|
|
|
$win configure -state disabled
|
|
return $win
|
|
}
|
|
|
|
#
|
|
# Local procedure:
|
|
#
|
|
# create_asm_win (funcname pc) - Create an assembly win for FUNCNAME.
|
|
#
|
|
# Return value:
|
|
#
|
|
# The new text widget.
|
|
#
|
|
# Description:
|
|
#
|
|
# This procedure creates a text widget for FUNCNAME. It returns the
|
|
# newly created widget. First, a text widget is created, and given basic
|
|
# configuration info. Second, all the bindings are setup. Third, the
|
|
# function FUNCNAME is read into the text widget.
|
|
#
|
|
|
|
proc create_asm_win {funcname pc} {
|
|
global breakpoint_file
|
|
global breakpoint_line
|
|
global pclist
|
|
global disassemble_with_source
|
|
|
|
# Replace all the dirty characters in $filename with clean ones, and generate
|
|
# a unique name for the text widget.
|
|
|
|
set win [asm_win_name $funcname]
|
|
|
|
# Actually create and do basic configuration on the text widget.
|
|
|
|
text $win -height 25 -width 80 -relief sunken -borderwidth 2 \
|
|
-setgrid true -cursor hand2 -yscrollcommand asmscrollproc
|
|
|
|
# Setup all the bindings
|
|
|
|
bind $win <Enter> {focus %W}
|
|
bind $win <1> {asm_window_button_1 %W %X %Y %x %y}
|
|
bind $win <B1-Motion> do_nothing
|
|
bind $win n {interactive_cmd nexti}
|
|
bind $win s {interactive_cmd stepi}
|
|
bind $win c {interactive_cmd continue}
|
|
bind $win f {interactive_cmd finish}
|
|
bind $win u {interactive_cmd up}
|
|
bind $win d {interactive_cmd down}
|
|
|
|
# Disassemble the code, and read it into the new text widget
|
|
|
|
$win insert end [gdb_disassemble $disassemble_with_source $pc]
|
|
|
|
set numlines [$win index end]
|
|
set numlines [lindex [split $numlines .] 0]
|
|
decr numlines
|
|
|
|
# Delete the first and last lines, cuz these contain useless info
|
|
|
|
# $win delete 1.0 2.0
|
|
# $win delete {end - 1 lines} end
|
|
# decr numlines 2
|
|
|
|
# Add margins (for annotations) and note the PC for each line
|
|
|
|
catch "unset pclist($funcname)"
|
|
lappend pclist($funcname) Unused
|
|
for {set i 1} {$i <= $numlines} {incr i} {
|
|
scan [$win get $i.0 "$i.0 lineend"] "%s " pc
|
|
lappend pclist($funcname) $pc
|
|
$win insert $i.0 " "
|
|
}
|
|
|
|
# Scan though the breakpoint data base and install any destined for this file
|
|
|
|
# foreach bpnum [array names breakpoint_file] {
|
|
# if {$breakpoint_file($bpnum) == $filename} {
|
|
# insert_breakpoint_tag $win $breakpoint_line($bpnum)
|
|
# }
|
|
# }
|
|
|
|
# Disable the text widget to prevent user modifications
|
|
|
|
$win configure -state disabled
|
|
return $win
|
|
}
|
|
|
|
#
|
|
# Local procedure:
|
|
#
|
|
# asmscrollproc (WINHEIGHT SCREENHEIGHT SCREENTOP SCREENBOT) - Update the
|
|
# asm window scrollbar.
|
|
#
|
|
# Description:
|
|
#
|
|
# This procedure is called to update the assembler window's scrollbar.
|
|
#
|
|
|
|
proc asmscrollproc {args} {
|
|
global asm_screen_height asm_screen_top asm_screen_bot
|
|
|
|
eval ".asm.scroll set $args"
|
|
set asm_screen_height [lindex $args 1]
|
|
set asm_screen_top [lindex $args 2]
|
|
set asm_screen_bot [lindex $args 3]
|
|
}
|
|
|
|
#
|
|
# Local procedure:
|
|
#
|
|
# update_listing (linespec) - Update the listing window according to
|
|
# LINESPEC.
|
|
#
|
|
# Description:
|
|
#
|
|
# This procedure is called from various places to update the listing
|
|
# window based on LINESPEC. It is usually invoked with the result of
|
|
# gdb_loc.
|
|
#
|
|
# It will move the cursor, and scroll the text widget if necessary.
|
|
# Also, it will switch to another text widget if necessary, and update
|
|
# the label widget too.
|
|
#
|
|
# LINESPEC is a list of the form:
|
|
#
|
|
# { DEBUG_FILE FUNCNAME FILENAME LINE }, where:
|
|
#
|
|
# DEBUG_FILE - is the abbreviated form of the file name. This is usually
|
|
# the file name string given to the cc command. This is
|
|
# primarily needed for breakpoint commands, and when an
|
|
# abbreviated for of the filename is desired.
|
|
# FUNCNAME - is the name of the function.
|
|
# FILENAME - is the fully qualified (absolute) file name. It is usually
|
|
# the same as $PWD/$DEBUG_FILE, where PWD is the working dir
|
|
# at the time the cc command was given. This is used to
|
|
# actually locate the file to be displayed.
|
|
# LINE - The line number to be displayed.
|
|
#
|
|
# Usually, this procedure will just move the cursor one line down to the
|
|
# next line to be executed. However, if the cursor moves out of range
|
|
# or into another file, it will scroll the text widget so that the line
|
|
# of interest is in the middle of the viewable portion of the widget.
|
|
#
|
|
|
|
proc update_listing {linespec} {
|
|
global pointers
|
|
global screen_height
|
|
global screen_top
|
|
global screen_bot
|
|
global wins cfile
|
|
global current_label
|
|
global win_to_file
|
|
global file_to_debug_file
|
|
global .src.label
|
|
|
|
# Rip the linespec apart
|
|
|
|
set line [lindex $linespec 3]
|
|
set filename [lindex $linespec 2]
|
|
set funcname [lindex $linespec 1]
|
|
set debug_file [lindex $linespec 0]
|
|
|
|
# Sometimes there's no source file for this location
|
|
|
|
if {$filename == ""} {set filename Blank}
|
|
|
|
# If we want to switch files, we need to unpack the current text widget, and
|
|
# stick in the new one.
|
|
|
|
if {$filename != $cfile} then {
|
|
pack forget $wins($cfile)
|
|
set cfile $filename
|
|
|
|
# Create a text widget for this file if necessary
|
|
|
|
if ![info exists wins($cfile)] then {
|
|
set wins($cfile) [create_file_win $cfile $debug_file]
|
|
if {$wins($cfile) != ".src.nofile"} {
|
|
set win_to_file($wins($cfile)) $cfile
|
|
set file_to_debug_file($cfile) $debug_file
|
|
set pointers($cfile) 1.1
|
|
}
|
|
}
|
|
|
|
# Pack the text widget into the listing widget, and scroll to the right place
|
|
|
|
pack $wins($cfile) -side left -expand yes -in .src.info \
|
|
-fill both -after .src.scroll
|
|
|
|
# Make the scrollbar point at the new text widget
|
|
|
|
.src.scroll configure -command "$wins($cfile) yview"
|
|
|
|
$wins($cfile) yview [expr $line - $screen_height / 2]
|
|
}
|
|
|
|
# Update the label widget in case the filename or function name has changed
|
|
|
|
if {$current_label != "$filename.$funcname"} then {
|
|
set tail [expr [string last / $filename] + 1]
|
|
set .src.label "[string range $filename $tail end] : ${funcname}()"
|
|
# .src.label configure -text "[string range $filename $tail end] : ${funcname}()"
|
|
set current_label $filename.$funcname
|
|
}
|
|
|
|
# Update the pointer, scrolling the text widget if necessary to keep the
|
|
# pointer in an acceptable part of the screen.
|
|
|
|
if [info exists pointers($cfile)] then {
|
|
$wins($cfile) configure -state normal
|
|
set pointer_pos $pointers($cfile)
|
|
$wins($cfile) configure -state normal
|
|
$wins($cfile) delete $pointer_pos "$pointer_pos + 2 char"
|
|
$wins($cfile) insert $pointer_pos " "
|
|
|
|
set pointer_pos [$wins($cfile) index $line.1]
|
|
set pointers($cfile) $pointer_pos
|
|
|
|
$wins($cfile) delete $pointer_pos "$pointer_pos + 2 char"
|
|
$wins($cfile) insert $pointer_pos "->"
|
|
|
|
if {$line < $screen_top + 1
|
|
|| $line > $screen_bot} then {
|
|
$wins($cfile) yview [expr $line - $screen_height / 2]
|
|
}
|
|
|
|
$wins($cfile) configure -state disabled
|
|
}
|
|
}
|
|
|
|
#
|
|
# Local procedure:
|
|
#
|
|
# create_asm_window - Open up the assembly window.
|
|
#
|
|
# Description:
|
|
#
|
|
# Create an assembly window if it doesn't exist.
|
|
#
|
|
|
|
proc create_asm_window {} {
|
|
global cfunc
|
|
|
|
if [winfo exists .asm] {raise .asm ; return}
|
|
|
|
set cfunc *None*
|
|
set win [asm_win_name $cfunc]
|
|
|
|
build_framework .asm Assembly "*NIL*"
|
|
|
|
# First, delete all the old menu entries
|
|
|
|
.asm.menubar.view.menu delete 0 last
|
|
|
|
.asm.text configure -yscrollcommand asmscrollproc
|
|
|
|
frame .asm.row1
|
|
frame .asm.row2
|
|
|
|
button .asm.stepi -width 6 -text Stepi \
|
|
-command {interactive_cmd stepi}
|
|
button .asm.nexti -width 6 -text Nexti \
|
|
-command {interactive_cmd nexti}
|
|
button .asm.continue -width 6 -text Cont \
|
|
-command {interactive_cmd continue}
|
|
button .asm.finish -width 6 -text Finish \
|
|
-command {interactive_cmd finish}
|
|
button .asm.up -width 6 -text Up -command {interactive_cmd up}
|
|
button .asm.down -width 6 -text Down \
|
|
-command {interactive_cmd down}
|
|
button .asm.bottom -width 6 -text Bottom \
|
|
-command {interactive_cmd {frame 0}}
|
|
|
|
pack .asm.stepi .asm.continue .asm.up .asm.bottom -side left -padx 3 -pady 5 -in .asm.row1
|
|
pack .asm.nexti .asm.finish .asm.down -side left -padx 3 -pady 5 -in .asm.row2
|
|
|
|
pack .asm.row2 .asm.row1 -side bottom -anchor w -before .asm.info
|
|
|
|
update
|
|
|
|
update_assembly [gdb_loc]
|
|
|
|
# We do this update_assembly to get the proper value of disassemble-from-exec.
|
|
|
|
# exec file menu item
|
|
.asm.menubar.view.menu add radiobutton -label "Exec file" \
|
|
-variable disassemble-from-exec -value 1
|
|
# target memory menu item
|
|
.asm.menubar.view.menu add radiobutton -label "Target memory" \
|
|
-variable disassemble-from-exec -value 0
|
|
|
|
# Disassemble with source
|
|
.asm.menubar.view.menu add checkbutton -label "Source" \
|
|
-variable disassemble_with_source -onvalue source \
|
|
-offvalue nosource -command {
|
|
foreach asm [info command .asm.func_*] {
|
|
destroy $asm
|
|
}
|
|
set cfunc NIL
|
|
update_assembly [gdb_loc]
|
|
}
|
|
}
|
|
|
|
proc reg_config_menu {} {
|
|
catch {destroy .reg.config}
|
|
toplevel .reg.config
|
|
wm geometry .reg.config +300+300
|
|
wm title .reg.config "Register configuration"
|
|
wm iconname .reg.config "Reg config"
|
|
set regnames [gdb_regnames]
|
|
set num_regs [llength $regnames]
|
|
|
|
frame .reg.config.buts
|
|
|
|
button .reg.config.done -text " Done " -command "
|
|
recompute_reg_display_list $num_regs
|
|
populate_reg_window
|
|
update_registers all
|
|
destroy .reg.config "
|
|
|
|
button .reg.config.update -text Update -command "
|
|
recompute_reg_display_list $num_regs
|
|
populate_reg_window
|
|
update_registers all "
|
|
|
|
pack .reg.config.buts -side bottom -fill x
|
|
|
|
pack .reg.config.done -side left -fill x -expand yes -in .reg.config.buts
|
|
pack .reg.config.update -side right -fill x -expand yes -in .reg.config.buts
|
|
|
|
# Since there can be lots of registers, we build the window with no more than
|
|
# 32 rows, and as many columns as needed.
|
|
|
|
# First, figure out how many columns we need and create that many column frame
|
|
# widgets
|
|
|
|
set ncols [expr ($num_regs + 31) / 32]
|
|
|
|
for {set col 0} {$col < $ncols} {incr col} {
|
|
frame .reg.config.col$col
|
|
pack .reg.config.col$col -side left -anchor n
|
|
}
|
|
|
|
# Now, create the checkbutton widgets and pack them in the appropriate columns
|
|
|
|
set col 0
|
|
set row 0
|
|
for {set regnum 0} {$regnum < $num_regs} {incr regnum} {
|
|
set regname [lindex $regnames $regnum]
|
|
checkbutton .reg.config.col$col.$row -text $regname -pady 0 \
|
|
-variable regena($regnum) -relief flat -anchor w -bd 1
|
|
|
|
pack .reg.config.col$col.$row -side top -fill both
|
|
|
|
incr row
|
|
if {$row >= 32} {
|
|
incr col
|
|
set row 0
|
|
}
|
|
}
|
|
}
|
|
|
|
#
|
|
# Local procedure:
|
|
#
|
|
# create_registers_window - Open up the register display window.
|
|
#
|
|
# Description:
|
|
#
|
|
# Create the register display window, with automatic updates.
|
|
#
|
|
|
|
proc create_registers_window {} {
|
|
global reg_format
|
|
|
|
if [winfo exists .reg] {raise .reg ; return}
|
|
|
|
# Create an initial register display list consisting of all registers
|
|
|
|
if ![info exists reg_format] {
|
|
global reg_display_list
|
|
global changed_reg_list
|
|
global regena
|
|
|
|
set reg_format {}
|
|
set num_regs [llength [gdb_regnames]]
|
|
for {set regnum 0} {$regnum < $num_regs} {incr regnum} {
|
|
set regena($regnum) 1
|
|
}
|
|
recompute_reg_display_list $num_regs
|
|
set changed_reg_list $reg_display_list
|
|
}
|
|
|
|
build_framework .reg Registers
|
|
|
|
# First, delete all the old menu entries
|
|
|
|
.reg.menubar.view.menu delete 0 last
|
|
|
|
# Hex menu item
|
|
.reg.menubar.view.menu add radiobutton -label Hex \
|
|
-command {set reg_format x ; update_registers all}
|
|
|
|
# Decimal menu item
|
|
.reg.menubar.view.menu add radiobutton -label Decimal \
|
|
-command {set reg_format d ; update_registers all}
|
|
|
|
# Octal menu item
|
|
.reg.menubar.view.menu add radiobutton -label Octal \
|
|
-command {set reg_format o ; update_registers all}
|
|
|
|
# Natural menu item
|
|
.reg.menubar.view.menu add radiobutton -label Natural \
|
|
-command {set reg_format {} ; update_registers all}
|
|
|
|
# Config menu item
|
|
.reg.menubar.view.menu add separator
|
|
|
|
.reg.menubar.view.menu add command -label Config -command {
|
|
reg_config_menu }
|
|
|
|
destroy .reg.label
|
|
|
|
# Install the reg names
|
|
|
|
populate_reg_window
|
|
update_registers all
|
|
}
|
|
|
|
# Convert regena into a list of the enabled $regnums
|
|
|
|
proc recompute_reg_display_list {num_regs} {
|
|
global reg_display_list
|
|
global regmap
|
|
global regena
|
|
|
|
catch {unset reg_display_list}
|
|
|
|
set line 1
|
|
for {set regnum 0} {$regnum < $num_regs} {incr regnum} {
|
|
|
|
if {[set regena($regnum)] != 0} {
|
|
lappend reg_display_list $regnum
|
|
set regmap($regnum) $line
|
|
incr line
|
|
}
|
|
}
|
|
}
|
|
|
|
# Fill out the register window with the names of the regs specified in
|
|
# reg_display_list.
|
|
|
|
proc populate_reg_window {} {
|
|
global max_regname_width
|
|
global reg_display_list
|
|
|
|
.reg.text configure -state normal
|
|
|
|
.reg.text delete 0.0 end
|
|
|
|
set regnames [eval gdb_regnames $reg_display_list]
|
|
|
|
# Figure out the longest register name
|
|
|
|
set max_regname_width 0
|
|
|
|
foreach reg $regnames {
|
|
set len [string length $reg]
|
|
if {$len > $max_regname_width} {set max_regname_width $len}
|
|
}
|
|
|
|
set width [expr $max_regname_width + 15]
|
|
|
|
set height [llength $regnames]
|
|
|
|
if {$height > 60} {set height 60}
|
|
|
|
.reg.text configure -height $height -width $width
|
|
|
|
foreach reg $regnames {
|
|
.reg.text insert end [format "%-*s \n" $max_regname_width ${reg}]
|
|
}
|
|
|
|
.reg.text yview 0
|
|
.reg.text configure -state disabled
|
|
}
|
|
|
|
#
|
|
# Local procedure:
|
|
#
|
|
# update_registers - Update the registers window.
|
|
#
|
|
# Description:
|
|
#
|
|
# This procedure updates the registers window.
|
|
#
|
|
|
|
proc update_registers {which} {
|
|
global max_regname_width
|
|
global reg_format
|
|
global reg_display_list
|
|
global changed_reg_list
|
|
global highlight
|
|
global regmap
|
|
|
|
set margin [expr $max_regname_width + 1]
|
|
set win .reg.text
|
|
set winwidth [lindex [$win configure -width] 4]
|
|
set valwidth [expr $winwidth - $margin]
|
|
|
|
$win configure -state normal
|
|
|
|
if {$which == "all"} {
|
|
set lineindex 1
|
|
foreach regnum $reg_display_list {
|
|
set regval [gdb_fetch_registers $reg_format $regnum]
|
|
set regval [format "%-*s" $valwidth $regval]
|
|
$win delete $lineindex.$margin "$lineindex.0 lineend"
|
|
$win insert $lineindex.$margin $regval
|
|
incr lineindex
|
|
}
|
|
$win configure -state disabled
|
|
return
|
|
}
|
|
|
|
# Unhighlight the old values
|
|
|
|
foreach regnum $changed_reg_list {
|
|
$win tag delete $win.$regnum
|
|
}
|
|
|
|
# Now, highlight the changed values of the interesting registers
|
|
|
|
set changed_reg_list [eval gdb_changed_register_list $reg_display_list]
|
|
|
|
set lineindex 1
|
|
foreach regnum $changed_reg_list {
|
|
set regval [gdb_fetch_registers $reg_format $regnum]
|
|
set regval [format "%-*s" $valwidth $regval]
|
|
|
|
set lineindex $regmap($regnum)
|
|
$win delete $lineindex.$margin "$lineindex.0 lineend"
|
|
$win insert $lineindex.$margin $regval
|
|
$win tag add $win.$regnum $lineindex.0 "$lineindex.0 lineend"
|
|
eval $win tag configure $win.$regnum $highlight
|
|
}
|
|
|
|
$win configure -state disabled
|
|
}
|
|
|
|
#
|
|
# Local procedure:
|
|
#
|
|
# update_assembly - Update the assembly window.
|
|
#
|
|
# Description:
|
|
#
|
|
# This procedure updates the assembly window.
|
|
#
|
|
|
|
proc update_assembly {linespec} {
|
|
global asm_pointers
|
|
global screen_height
|
|
global screen_top
|
|
global screen_bot
|
|
global wins cfunc
|
|
global current_label
|
|
global win_to_file
|
|
global file_to_debug_file
|
|
global current_asm_label
|
|
global pclist
|
|
global asm_screen_height asm_screen_top asm_screen_bot
|
|
global .asm.label
|
|
|
|
# Rip the linespec apart
|
|
|
|
set pc [lindex $linespec 4]
|
|
set line [lindex $linespec 3]
|
|
set filename [lindex $linespec 2]
|
|
set funcname [lindex $linespec 1]
|
|
set debug_file [lindex $linespec 0]
|
|
|
|
set win [asm_win_name $cfunc]
|
|
|
|
# Sometimes there's no source file for this location
|
|
|
|
if {$filename == ""} {set filename Blank}
|
|
|
|
# If we want to switch funcs, we need to unpack the current text widget, and
|
|
# stick in the new one.
|
|
|
|
if {$funcname != $cfunc } {
|
|
set oldwin $win
|
|
set cfunc $funcname
|
|
|
|
set win [asm_win_name $cfunc]
|
|
|
|
# Create a text widget for this func if necessary
|
|
|
|
if {![winfo exists $win]} {
|
|
create_asm_win $cfunc $pc
|
|
set asm_pointers($cfunc) 1.1
|
|
set current_asm_label NIL
|
|
}
|
|
|
|
# Pack the text widget, and scroll to the right place
|
|
|
|
pack forget $oldwin
|
|
pack $win -side left -expand yes -fill both \
|
|
-after .asm.scroll
|
|
.asm.scroll configure -command "$win yview"
|
|
set line [pc_to_line $pclist($cfunc) $pc]
|
|
update
|
|
$win yview [expr $line - $asm_screen_height / 2]
|
|
}
|
|
|
|
# Update the label widget in case the filename or function name has changed
|
|
|
|
if {$current_asm_label != "$pc $funcname"} then {
|
|
set .asm.label "$pc $funcname"
|
|
set current_asm_label "$pc $funcname"
|
|
}
|
|
|
|
# Update the pointer, scrolling the text widget if necessary to keep the
|
|
# pointer in an acceptable part of the screen.
|
|
|
|
if [info exists asm_pointers($cfunc)] then {
|
|
$win configure -state normal
|
|
set pointer_pos $asm_pointers($cfunc)
|
|
$win configure -state normal
|
|
$win delete $pointer_pos "$pointer_pos + 2 char"
|
|
$win insert $pointer_pos " "
|
|
|
|
# Map the PC back to a line in the window
|
|
|
|
set line [pc_to_line $pclist($cfunc) $pc]
|
|
|
|
if {$line == -1} {
|
|
echo "Can't find PC $pc"
|
|
return
|
|
}
|
|
|
|
set pointer_pos [$win index $line.1]
|
|
set asm_pointers($cfunc) $pointer_pos
|
|
|
|
$win delete $pointer_pos "$pointer_pos + 2 char"
|
|
$win insert $pointer_pos "->"
|
|
|
|
if {$line < $asm_screen_top + 1
|
|
|| $line > $asm_screen_bot} then {
|
|
$win yview [expr $line - $asm_screen_height / 2]
|
|
}
|
|
|
|
$win configure -state disabled
|
|
}
|
|
}
|
|
|
|
#
|
|
# Local procedure:
|
|
#
|
|
# update_ptr - Update the listing window.
|
|
#
|
|
# Description:
|
|
#
|
|
# This routine will update the listing window using the result of
|
|
# gdb_loc.
|
|
#
|
|
|
|
proc update_ptr {} {
|
|
update_listing [gdb_loc]
|
|
if [winfo exists .asm] {
|
|
update_assembly [gdb_loc]
|
|
}
|
|
if [winfo exists .reg] {
|
|
update_registers changed
|
|
}
|
|
if [winfo exists .expr] {
|
|
update_exprs
|
|
}
|
|
if [winfo exists .autocmd] {
|
|
update_autocmd
|
|
}
|
|
}
|
|
|
|
# Make toplevel window disappear
|
|
|
|
wm withdraw .
|
|
|
|
proc files_command {} {
|
|
toplevel .files_window
|
|
|
|
wm minsize .files_window 1 1
|
|
# wm overrideredirect .files_window true
|
|
listbox .files_window.list -geometry 30x20 -setgrid true \
|
|
-yscrollcommand {.files_window.scroll set} -relief sunken \
|
|
-borderwidth 2
|
|
scrollbar .files_window.scroll -orient vertical \
|
|
-command {.files_window.list yview} -relief sunken
|
|
button .files_window.close -text Close -command {destroy .files_window}
|
|
tk_listboxSingleSelect .files_window.list
|
|
|
|
# Get the file list from GDB, sort it, and format it as one entry per line.
|
|
|
|
set filelist [join [lsort [gdb_listfiles]] "\n"]
|
|
|
|
# Now, remove duplicates (by using uniq)
|
|
|
|
set fh [open "| uniq > /tmp/gdbtk.[pid]" w]
|
|
puts $fh $filelist
|
|
close $fh
|
|
set fh [open /tmp/gdbtk.[pid]]
|
|
set filelist [split [read $fh] "\n"]
|
|
set filelist [lrange $filelist 0 [expr [llength $filelist] - 2]]
|
|
close $fh
|
|
exec rm /tmp/gdbtk.[pid]
|
|
|
|
# Insert the file list into the widget
|
|
|
|
eval .files_window.list insert 0 $filelist
|
|
|
|
pack .files_window.close -side bottom -fill x -expand no -anchor s
|
|
pack .files_window.scroll -side right -fill both
|
|
pack .files_window.list -side left -fill both -expand yes
|
|
bind .files_window.list <Any-ButtonRelease-1> {
|
|
set file [%W get [%W curselection]]
|
|
gdb_cmd "list $file:1,0"
|
|
update_listing [gdb_loc $file:1]
|
|
destroy .files_window}
|
|
}
|
|
|
|
button .files -text Files -command files_command
|
|
|
|
proc apply_filespec {label default command} {
|
|
set filename [FSBox $label $default]
|
|
if {$filename != ""} {
|
|
if [catch {gdb_cmd "$command $filename"} retval] {
|
|
tk_dialog .filespec_error "gdb : $label error" \
|
|
"Error in command \"$command $filename\"" {} 0 Dismiss
|
|
return
|
|
}
|
|
update_ptr
|
|
}
|
|
}
|
|
|
|
# Setup command window
|
|
|
|
proc build_framework {win {title GDBtk} {label {}}} {
|
|
global ${win}.label
|
|
|
|
toplevel ${win}
|
|
wm title ${win} $title
|
|
wm minsize ${win} 1 1
|
|
|
|
frame ${win}.menubar
|
|
|
|
menubutton ${win}.menubar.file -padx 12 -text File \
|
|
-menu ${win}.menubar.file.menu -underline 0
|
|
|
|
menu ${win}.menubar.file.menu
|
|
${win}.menubar.file.menu add command -label File... \
|
|
-command {apply_filespec File a.out file}
|
|
${win}.menubar.file.menu add command -label Target... \
|
|
-command { not_implemented_yet "target" }
|
|
${win}.menubar.file.menu add command -label Edit \
|
|
-command {exec $editor +[expr ($screen_top + $screen_bot)/2] $cfile &}
|
|
${win}.menubar.file.menu add separator
|
|
${win}.menubar.file.menu add command -label "Exec File..." \
|
|
-command {apply_filespec {Exec File} a.out exec-file}
|
|
${win}.menubar.file.menu add command -label "Symbol File..." \
|
|
-command {apply_filespec {Symbol File} a.out symbol-file}
|
|
${win}.menubar.file.menu add command -label "Add Symbol File..." \
|
|
-command { not_implemented_yet "menu item, add symbol file" }
|
|
${win}.menubar.file.menu add command -label "Core File..." \
|
|
-command {apply_filespec {Core File} core core-file}
|
|
|
|
${win}.menubar.file.menu add separator
|
|
${win}.menubar.file.menu add command -label Close \
|
|
-command "destroy ${win}"
|
|
${win}.menubar.file.menu add separator
|
|
${win}.menubar.file.menu add command -label Quit \
|
|
-command {interactive_cmd quit}
|
|
|
|
menubutton ${win}.menubar.commands -padx 12 -text Commands \
|
|
-menu ${win}.menubar.commands.menu -underline 0
|
|
|
|
menu ${win}.menubar.commands.menu
|
|
${win}.menubar.commands.menu add command -label Run \
|
|
-command {interactive_cmd run}
|
|
${win}.menubar.commands.menu add command -label Step \
|
|
-command {interactive_cmd step}
|
|
${win}.menubar.commands.menu add command -label Next \
|
|
-command {interactive_cmd next}
|
|
${win}.menubar.commands.menu add command -label Continue \
|
|
-command {interactive_cmd continue}
|
|
${win}.menubar.commands.menu add separator
|
|
${win}.menubar.commands.menu add command -label Stepi \
|
|
-command {interactive_cmd stepi}
|
|
${win}.menubar.commands.menu add command -label Nexti \
|
|
-command {interactive_cmd nexti}
|
|
|
|
menubutton ${win}.menubar.view -padx 12 -text Options \
|
|
-menu ${win}.menubar.view.menu -underline 0
|
|
|
|
menu ${win}.menubar.view.menu
|
|
${win}.menubar.view.menu add command -label Hex \
|
|
-command {echo Hex}
|
|
${win}.menubar.view.menu add command -label Decimal \
|
|
-command {echo Decimal}
|
|
${win}.menubar.view.menu add command -label Octal \
|
|
-command {echo Octal}
|
|
|
|
menubutton ${win}.menubar.window -padx 12 -text Window \
|
|
-menu ${win}.menubar.window.menu -underline 0
|
|
|
|
menu ${win}.menubar.window.menu
|
|
${win}.menubar.window.menu add command -label Command \
|
|
-command create_command_window
|
|
${win}.menubar.window.menu add separator
|
|
${win}.menubar.window.menu add command -label Source \
|
|
-command create_source_window
|
|
${win}.menubar.window.menu add command -label Assembly \
|
|
-command create_asm_window
|
|
${win}.menubar.window.menu add separator
|
|
${win}.menubar.window.menu add command -label Registers \
|
|
-command create_registers_window
|
|
${win}.menubar.window.menu add command -label Expressions \
|
|
-command create_expr_window
|
|
${win}.menubar.window.menu add command -label "Auto Command" \
|
|
-command create_autocmd_window
|
|
# ${win}.menubar.window.menu add command -label Breakpoints \
|
|
# -command create_breakpoints_window
|
|
|
|
# ${win}.menubar.window.menu add separator
|
|
# ${win}.menubar.window.menu add command -label Files \
|
|
# -command { not_implemented_yet "files window" }
|
|
|
|
menubutton ${win}.menubar.help -padx 12 -text Help \
|
|
-menu ${win}.menubar.help.menu -underline 0
|
|
|
|
menu ${win}.menubar.help.menu
|
|
${win}.menubar.help.menu add command -label "with GDBtk" \
|
|
-command {echo "with GDBtk"}
|
|
${win}.menubar.help.menu add command -label "with this window" \
|
|
-command {echo "with this window"}
|
|
${win}.menubar.help.menu add command -label "Report bug" \
|
|
-command {exec send-pr}
|
|
|
|
tk_menuBar ${win}.menubar \
|
|
${win}.menubar.file \
|
|
${win}.menubar.view \
|
|
${win}.menubar.window \
|
|
${win}.menubar.help
|
|
pack ${win}.menubar.file \
|
|
${win}.menubar.view \
|
|
${win}.menubar.window -side left
|
|
pack ${win}.menubar.help -side right
|
|
|
|
frame ${win}.info
|
|
text ${win}.text -height 25 -width 80 -relief sunken -borderwidth 2 \
|
|
-setgrid true -cursor hand2 -yscrollcommand "${win}.scroll set"
|
|
|
|
set ${win}.label $label
|
|
label ${win}.label -textvariable ${win}.label -borderwidth 2 -relief sunken
|
|
|
|
scrollbar ${win}.scroll -orient vertical -command "${win}.text yview" \
|
|
-relief sunken
|
|
|
|
pack ${win}.label -side bottom -fill x -in ${win}.info
|
|
pack ${win}.scroll -side right -fill y -in ${win}.info
|
|
pack ${win}.text -side left -expand yes -fill both -in ${win}.info
|
|
|
|
pack ${win}.menubar -side top -fill x
|
|
pack ${win}.info -side top -fill both -expand yes
|
|
}
|
|
|
|
proc create_source_window {} {
|
|
global wins
|
|
global cfile
|
|
|
|
if [winfo exists .src] {raise .src ; return}
|
|
|
|
build_framework .src Source "*No file*"
|
|
|
|
# First, delete all the old view menu entries
|
|
|
|
.src.menubar.view.menu delete 0 last
|
|
|
|
# Source file selection
|
|
.src.menubar.view.menu add command -label "Select source file" \
|
|
-command files_command
|
|
|
|
# Line numbers enable/disable menu item
|
|
.src.menubar.view.menu add checkbutton -variable line_numbers \
|
|
-label "Line numbers" -onvalue 1 -offvalue 0 -command {
|
|
foreach source [array names wins] {
|
|
if {$source == "Blank"} continue
|
|
destroy $wins($source)
|
|
unset wins($source)
|
|
}
|
|
set cfile Blank
|
|
update_listing [gdb_loc]
|
|
}
|
|
|
|
frame .src.row1
|
|
frame .src.row2
|
|
|
|
button .src.start -width 6 -text Start -command \
|
|
{interactive_cmd {break main}
|
|
interactive_cmd {enable delete $bpnum}
|
|
interactive_cmd run }
|
|
button .src.stop -width 6 -text Stop -fg red -activeforeground red \
|
|
-state disabled -command gdb_stop
|
|
button .src.step -width 6 -text Step \
|
|
-command {interactive_cmd step}
|
|
button .src.next -width 6 -text Next \
|
|
-command {interactive_cmd next}
|
|
button .src.continue -width 6 -text Cont \
|
|
-command {interactive_cmd continue}
|
|
button .src.finish -width 6 -text Finish \
|
|
-command {interactive_cmd finish}
|
|
button .src.up -width 6 -text Up \
|
|
-command {interactive_cmd up}
|
|
button .src.down -width 6 -text Down \
|
|
-command {interactive_cmd down}
|
|
button .src.bottom -width 6 -text Bottom \
|
|
-command {interactive_cmd {frame 0}}
|
|
|
|
pack .src.start .src.step .src.continue .src.up .src.bottom \
|
|
-side left -padx 3 -pady 5 -in .src.row1
|
|
pack .src.stop .src.next .src.finish .src.down -side left -padx 3 \
|
|
-pady 5 -in .src.row2
|
|
|
|
pack .src.row2 .src.row1 -side bottom -anchor w -before .src.info
|
|
|
|
$wins($cfile) insert 0.0 " This page intentionally left blank."
|
|
$wins($cfile) configure -width 88 -state disabled \
|
|
-yscrollcommand textscrollproc
|
|
|
|
proc textscrollproc {args} {global screen_height screen_top screen_bot
|
|
eval ".src.scroll set $args"
|
|
set screen_height [lindex $args 1]
|
|
set screen_top [lindex $args 2]
|
|
set screen_bot [lindex $args 3]}
|
|
}
|
|
|
|
proc update_autocmd {} {
|
|
global .autocmd.label
|
|
global accumulate_output
|
|
|
|
catch {gdb_cmd "${.autocmd.label}"} result
|
|
if !$accumulate_output { .autocmd.text delete 0.0 end }
|
|
.autocmd.text insert end $result
|
|
.autocmd.text yview -pickplace end
|
|
}
|
|
|
|
proc create_autocmd_window {} {
|
|
global .autocmd.label
|
|
|
|
if [winfo exists .autocmd] {raise .autocmd ; return}
|
|
|
|
build_framework .autocmd "Auto Command" ""
|
|
|
|
# First, delete all the old view menu entries
|
|
|
|
.autocmd.menubar.view.menu delete 0 last
|
|
|
|
# Accumulate output option
|
|
|
|
.autocmd.menubar.view.menu add checkbutton \
|
|
-variable accumulate_output \
|
|
-label "Accumulate output" -onvalue 1 -offvalue 0
|
|
|
|
# Now, create entry widget with label
|
|
|
|
frame .autocmd.entryframe
|
|
|
|
entry .autocmd.entry -borderwidth 2 -relief sunken
|
|
bind .autocmd <Enter> {focus .autocmd.entry}
|
|
bind .autocmd.entry <Key-Return> {set .autocmd.label [.autocmd.entry get]
|
|
.autocmd.entry delete 0 end }
|
|
|
|
label .autocmd.entrylab -text "Command: "
|
|
|
|
pack .autocmd.entrylab -in .autocmd.entryframe -side left
|
|
pack .autocmd.entry -in .autocmd.entryframe -side left -fill x -expand yes
|
|
|
|
pack .autocmd.entryframe -side bottom -fill x -before .autocmd.info
|
|
}
|
|
|
|
proc create_command_window {} {
|
|
global command_line
|
|
|
|
if [winfo exists .cmd] {raise .cmd ; return}
|
|
|
|
build_framework .cmd Command "* Command Buffer *"
|
|
|
|
set command_line {}
|
|
|
|
gdb_cmd {set language c}
|
|
gdb_cmd {set height 0}
|
|
gdb_cmd {set width 0}
|
|
|
|
bind .cmd.text <Enter> {focus %W}
|
|
bind .cmd.text <Delete> {delete_char %W}
|
|
bind .cmd.text <BackSpace> {delete_char %W}
|
|
bind .cmd.text <Control-u> {delete_line %W}
|
|
bind .cmd.text <Any-Key> {
|
|
global command_line
|
|
|
|
%W insert end %A
|
|
%W yview -pickplace end
|
|
append command_line %A
|
|
}
|
|
bind .cmd.text <Key-Return> {
|
|
global command_line
|
|
|
|
%W insert end \n
|
|
interactive_cmd $command_line
|
|
|
|
# %W yview -pickplace end
|
|
# catch "gdb_cmd [list $command_line]" result
|
|
# %W insert end $result
|
|
set command_line {}
|
|
# update_ptr
|
|
%W insert end "(gdb) "
|
|
%W yview -pickplace end
|
|
}
|
|
bind .cmd.text <Button-2> {
|
|
global command_line
|
|
|
|
%W insert end [selection get]
|
|
%W yview -pickplace end
|
|
append command_line [selection get]
|
|
}
|
|
proc delete_char {win} {
|
|
global command_line
|
|
|
|
tk_textBackspace $win
|
|
$win yview -pickplace insert
|
|
set tmp [expr [string length $command_line] - 2]
|
|
set command_line [string range $command_line 0 $tmp]
|
|
}
|
|
proc delete_line {win} {
|
|
global command_line
|
|
|
|
$win delete {end linestart + 6 chars} end
|
|
$win yview -pickplace insert
|
|
set command_line {}
|
|
}
|
|
}
|
|
|
|
#
|
|
# fileselect.tcl --
|
|
# simple file selector.
|
|
#
|
|
# Mario Jorge Silva msilva@cs.Berkeley.EDU
|
|
# University of California Berkeley Ph: +1(510)642-8248
|
|
# Computer Science Division, 571 Evans Hall Fax: +1(510)642-5775
|
|
# Berkeley CA 94720
|
|
#
|
|
#
|
|
# Copyright 1993 Regents of the University of California
|
|
# Permission to use, copy, modify, and distribute this
|
|
# software and its documentation for any purpose and without
|
|
# fee is hereby granted, provided that this copyright
|
|
# notice appears in all copies. The University of California
|
|
# makes no representations about the suitability of this
|
|
# software for any purpose. It is provided "as is" without
|
|
# express or implied warranty.
|
|
#
|
|
|
|
|
|
# names starting with "fileselect" are reserved by this module
|
|
# no other names used.
|
|
# Hack - FSBox is defined instead of fileselect for backwards compatibility
|
|
|
|
|
|
# this is the proc that creates the file selector box
|
|
# purpose - comment string
|
|
# defaultName - initial value for name
|
|
# cmd - command to eval upon OK
|
|
# errorHandler - command to eval upon Cancel
|
|
# If neither cmd or errorHandler are specified, the return value
|
|
# of the FSBox procedure is the selected file name.
|
|
|
|
proc FSBox {{purpose "Select file:"} {defaultName ""} {cmd ""} {errorHandler
|
|
""}} {
|
|
global fileselect
|
|
set w .fileSelect
|
|
if [Exwin_Toplevel $w "Select File" FileSelect] {
|
|
# path independent names for the widgets
|
|
|
|
set fileselect(list) $w.file.sframe.list
|
|
set fileselect(scroll) $w.file.sframe.scroll
|
|
set fileselect(direntry) $w.file.f1.direntry
|
|
set fileselect(entry) $w.file.f2.entry
|
|
set fileselect(ok) $w.but.ok
|
|
set fileselect(cancel) $w.but.cancel
|
|
set fileselect(msg) $w.label
|
|
|
|
set fileselect(result) "" ;# value to return if no callback procedures
|
|
|
|
# widgets
|
|
Widget_Label $w label {top fillx pady 10 padx 20} -anchor w -width 24
|
|
Widget_Frame $w file Dialog {left expand fill} -bd 10
|
|
|
|
Widget_Frame $w.file f1 Exmh {top fillx}
|
|
Widget_Label $w.file.f1 label {left} -text "Dir"
|
|
Widget_Entry $w.file.f1 direntry {right fillx expand} -width 30
|
|
|
|
Widget_Frame $w.file sframe
|
|
|
|
scrollbar $w.file.sframe.yscroll -relief sunken \
|
|
-command [list $w.file.sframe.list yview]
|
|
listbox $w.file.sframe.list -relief sunken \
|
|
-yscroll [list $w.file.sframe.yscroll set] -setgrid 1
|
|
pack append $w.file.sframe \
|
|
$w.file.sframe.yscroll {right filly} \
|
|
$w.file.sframe.list {left expand fill}
|
|
|
|
Widget_Frame $w.file f2 Exmh {top fillx}
|
|
Widget_Label $w.file.f2 label {left} -text Name
|
|
Widget_Entry $w.file.f2 entry {right fillx expand}
|
|
|
|
# buttons
|
|
$w.but.quit configure -text Cancel \
|
|
-command [list fileselect.cancel.cmd $w]
|
|
|
|
Widget_AddBut $w.but ok OK \
|
|
[list fileselect.ok.cmd $w $cmd $errorHandler] {left padx 1}
|
|
|
|
Widget_AddBut $w.but list List \
|
|
[list fileselect.list.cmd $w] {left padx 1}
|
|
Widget_CheckBut $w.but listall "List all" fileselect(pattern)
|
|
$w.but.listall configure -onvalue "{*,.*}" -offvalue "*" \
|
|
-command {fileselect.list.cmd $fileselect(direntry)}
|
|
$w.but.listall deselect
|
|
|
|
# Set up bindings for the browser.
|
|
foreach ww [list $w $fileselect(entry)] {
|
|
bind $ww <Return> [list $fileselect(ok) invoke]
|
|
bind $ww <Control-c> [list $fileselect(cancel) invoke]
|
|
}
|
|
bind $fileselect(direntry) <Return> [list fileselect.list.cmd %W]
|
|
bind $fileselect(direntry) <Tab> [list fileselect.tab.dircmd]
|
|
bind $fileselect(entry) <Tab> [list fileselect.tab.filecmd]
|
|
|
|
tk_listboxSingleSelect $fileselect(list)
|
|
|
|
|
|
bind $fileselect(list) <Button-1> {
|
|
# puts stderr "button 1 release"
|
|
%W select from [%W nearest %y]
|
|
$fileselect(entry) delete 0 end
|
|
$fileselect(entry) insert 0 [%W get [%W nearest %y]]
|
|
}
|
|
|
|
bind $fileselect(list) <Key> {
|
|
%W select from [%W nearest %y]
|
|
$fileselect(entry) delete 0 end
|
|
$fileselect(entry) insert 0 [%W get [%W nearest %y]]
|
|
}
|
|
|
|
bind $fileselect(list) <Double-ButtonPress-1> {
|
|
# puts stderr "double button 1"
|
|
%W select from [%W nearest %y]
|
|
$fileselect(entry) delete 0 end
|
|
$fileselect(entry) insert 0 [%W get [%W nearest %y]]
|
|
$fileselect(ok) invoke
|
|
}
|
|
|
|
bind $fileselect(list) <Return> {
|
|
%W select from [%W nearest %y]
|
|
$fileselect(entry) delete 0 end
|
|
$fileselect(entry) insert 0 [%W get [%W nearest %y]]
|
|
$fileselect(ok) invoke
|
|
}
|
|
}
|
|
set fileselect(text) $purpose
|
|
$fileselect(msg) configure -text $purpose
|
|
$fileselect(entry) delete 0 end
|
|
$fileselect(entry) insert 0 [file tail $defaultName]
|
|
|
|
if {[info exists fileselect(lastDir)] && ![string length $defaultName]} {
|
|
set dir $fileselect(lastDir)
|
|
} else {
|
|
set dir [file dirname $defaultName]
|
|
}
|
|
set fileselect(pwd) [pwd]
|
|
fileselect.cd $dir
|
|
$fileselect(direntry) delete 0 end
|
|
$fileselect(direntry) insert 0 [pwd]/
|
|
|
|
$fileselect(list) delete 0 end
|
|
$fileselect(list) insert 0 "Big directory:"
|
|
$fileselect(list) insert 1 $dir
|
|
$fileselect(list) insert 2 "Press Return for Listing"
|
|
|
|
fileselect.list.cmd $fileselect(direntry) startup
|
|
|
|
# set kbd focus to entry widget
|
|
|
|
# Exwin_ToplevelFocus $w $fileselect(entry)
|
|
|
|
# Wait for button hits if no callbacks are defined
|
|
|
|
if {"$cmd" == "" && "$errorHandler" == ""} {
|
|
# wait for the box to be destroyed
|
|
update idletask
|
|
grab $w
|
|
tkwait variable fileselect(result)
|
|
grab release $w
|
|
|
|
set path $fileselect(result)
|
|
set fileselect(lastDir) [pwd]
|
|
fileselect.cd $fileselect(pwd)
|
|
return [string trimright [string trim $path] /]
|
|
}
|
|
fileselect.cd $fileselect(pwd)
|
|
return ""
|
|
}
|
|
|
|
proc fileselect.cd { dir } {
|
|
global fileselect
|
|
if [catch {cd $dir} err] {
|
|
fileselect.yck $dir
|
|
cd
|
|
}
|
|
}
|
|
# auxiliary button procedures
|
|
|
|
proc fileselect.yck { {tag {}} } {
|
|
global fileselect
|
|
$fileselect(msg) configure -text "Yck! $tag"
|
|
}
|
|
proc fileselect.ok {} {
|
|
global fileselect
|
|
$fileselect(msg) configure -text $fileselect(text)
|
|
}
|
|
|
|
proc fileselect.cancel.cmd {w} {
|
|
global fileselect
|
|
set fileselect(result) {}
|
|
destroy $w
|
|
}
|
|
|
|
proc fileselect.list.cmd {w {state normal}} {
|
|
global fileselect
|
|
set seldir [$fileselect(direntry) get]
|
|
if {[catch {glob $seldir} dir]} {
|
|
fileselect.yck "glob failed"
|
|
return
|
|
}
|
|
if {[llength $dir] > 1} {
|
|
set dir [file dirname $seldir]
|
|
set pat [file tail $seldir]
|
|
} else {
|
|
set pat $fileselect(pattern)
|
|
}
|
|
fileselect.ok
|
|
update idletasks
|
|
if [file isdirectory $dir] {
|
|
fileselect.getfiles $dir $pat $state
|
|
focus $fileselect(entry)
|
|
} else {
|
|
fileselect.yck "not a dir"
|
|
}
|
|
}
|
|
|
|
proc fileselect.ok.cmd {w cmd errorHandler} {
|
|
global fileselect
|
|
set selname [$fileselect(entry) get]
|
|
set seldir [$fileselect(direntry) get]
|
|
|
|
if [string match /* $selname] {
|
|
set selected $selname
|
|
} else {
|
|
if [string match ~* $selname] {
|
|
set selected $selname
|
|
} else {
|
|
set selected $seldir/$selname
|
|
}
|
|
}
|
|
|
|
# some nasty file names may cause "file isdirectory" to return an error
|
|
if [catch {file isdirectory $selected} isdir] {
|
|
fileselect.yck "isdirectory failed"
|
|
return
|
|
}
|
|
if [catch {glob $selected} globlist] {
|
|
if ![file isdirectory [file dirname $selected]] {
|
|
fileselect.yck "bad pathname"
|
|
return
|
|
}
|
|
set globlist $selected
|
|
}
|
|
fileselect.ok
|
|
update idletasks
|
|
|
|
if {[llength $globlist] > 1} {
|
|
set dir [file dirname $selected]
|
|
set pat [file tail $selected]
|
|
fileselect.getfiles $dir $pat
|
|
return
|
|
} else {
|
|
set selected $globlist
|
|
}
|
|
if [file isdirectory $selected] {
|
|
fileselect.getfiles $selected $fileselect(pattern)
|
|
$fileselect(entry) delete 0 end
|
|
return
|
|
}
|
|
|
|
if {$cmd != {}} {
|
|
$cmd $selected
|
|
} else {
|
|
set fileselect(result) $selected
|
|
}
|
|
destroy $w
|
|
}
|
|
|
|
proc fileselect.getfiles { dir {pat *} {state normal} } {
|
|
global fileselect
|
|
$fileselect(msg) configure -text Listing...
|
|
update idletasks
|
|
|
|
set currentDir [pwd]
|
|
fileselect.cd $dir
|
|
if [catch {set files [lsort [glob -nocomplain $pat]]} err] {
|
|
$fileselect(msg) configure -text $err
|
|
$fileselect(list) delete 0 end
|
|
update idletasks
|
|
return
|
|
}
|
|
switch -- $state {
|
|
normal {
|
|
# Normal case - show current directory
|
|
$fileselect(direntry) delete 0 end
|
|
$fileselect(direntry) insert 0 [pwd]/
|
|
}
|
|
opt {
|
|
# Directory already OK (tab related)
|
|
}
|
|
newdir {
|
|
# Changing directory (tab related)
|
|
fileselect.cd $currentDir
|
|
}
|
|
startup {
|
|
# Avoid listing huge directories upon startup.
|
|
$fileselect(direntry) delete 0 end
|
|
$fileselect(direntry) insert 0 [pwd]/
|
|
if {[llength $files] > 32} {
|
|
fileselect.ok
|
|
return
|
|
}
|
|
}
|
|
}
|
|
|
|
# build a reordered list of the files: directories are displayed first
|
|
# and marked with a trailing "/"
|
|
if [string compare $dir /] {
|
|
fileselect.putfiles $files [expr {($pat == "*") ? 1 : 0}]
|
|
} else {
|
|
fileselect.putfiles $files
|
|
}
|
|
fileselect.ok
|
|
}
|
|
|
|
proc fileselect.putfiles {files {dotdot 0} } {
|
|
global fileselect
|
|
|
|
$fileselect(list) delete 0 end
|
|
if {$dotdot} {
|
|
$fileselect(list) insert end "../"
|
|
}
|
|
foreach i $files {
|
|
if {[file isdirectory $i]} {
|
|
$fileselect(list) insert end $i/
|
|
} else {
|
|
$fileselect(list) insert end $i
|
|
}
|
|
}
|
|
}
|
|
|
|
proc FileExistsDialog { name } {
|
|
set w .fileExists
|
|
global fileExists
|
|
set fileExists(ok) 0
|
|
{
|
|
message $w.msg -aspect 1000
|
|
pack $w.msg -side top -fill both -padx 20 -pady 20
|
|
$w.but.quit config -text Cancel -command {FileExistsCancel}
|
|
button $w.but.ok -text OK -command {FileExistsOK}
|
|
pack $w.but.ok -side left
|
|
bind $w.msg <Return> {FileExistsOK}
|
|
}
|
|
$w.msg config -text "Warning: file exists
|
|
$name
|
|
OK to overwrite it?"
|
|
|
|
set fileExists(focus) [focus]
|
|
focus $w.msg
|
|
grab $w
|
|
tkwait variable fileExists(ok)
|
|
grab release $w
|
|
destroy $w
|
|
return $fileExists(ok)
|
|
}
|
|
proc FileExistsCancel {} {
|
|
global fileExists
|
|
set fileExists(ok) 0
|
|
}
|
|
proc FileExistsOK {} {
|
|
global fileExists
|
|
set fileExists(ok) 1
|
|
}
|
|
|
|
proc fileselect.getfiledir { dir {basedir [pwd]} } {
|
|
global fileselect
|
|
|
|
set path [$fileselect(direntry) get]
|
|
set returnList {}
|
|
|
|
if {$dir != 0} {
|
|
if {[string index $path 0] == "~"} {
|
|
set path $path/
|
|
}
|
|
} else {
|
|
set path [$fileselect(entry) get]
|
|
}
|
|
if [catch {set listFile [glob -nocomplain $path*]}] {
|
|
return $returnList
|
|
}
|
|
foreach el $listFile {
|
|
if {$dir != 0} {
|
|
if [file isdirectory $el] {
|
|
lappend returnList [file tail $el]
|
|
}
|
|
} elseif ![file isdirectory $el] {
|
|
lappend returnList [file tail $el]
|
|
}
|
|
}
|
|
|
|
return $returnList
|
|
}
|
|
|
|
proc fileselect.gethead { list } {
|
|
set returnHead ""
|
|
|
|
for {set i 0} {[string length [lindex $list 0]] > $i}\
|
|
{incr i; set returnHead $returnHead$thisChar} {
|
|
set thisChar [string index [lindex $list 0] $i]
|
|
foreach el $list {
|
|
if {[string length $el] < $i} {
|
|
return $returnHead
|
|
}
|
|
if {$thisChar != [string index $el $i]} {
|
|
return $returnHead
|
|
}
|
|
}
|
|
}
|
|
return $returnHead
|
|
}
|
|
|
|
proc fileselect.expand.tilde { } {
|
|
global fileselect
|
|
|
|
set entry [$fileselect(direntry) get]
|
|
set dir [string range $entry 1 [string length $entry]]
|
|
|
|
if {$dir == ""} {
|
|
return
|
|
}
|
|
|
|
set listmatch {}
|
|
|
|
## look in /etc/passwd
|
|
if [file exists /etc/passwd] {
|
|
if [catch {set users [exec cat /etc/passwd | sed s/:.*//]} err] {
|
|
puts "Error\#1 $err"
|
|
return
|
|
}
|
|
set list [split $users "\n"]
|
|
}
|
|
if {[lsearch -exact $list "+"] != -1} {
|
|
if [catch {set users [exec ypcat passwd | sed s/:.*//]} err] {
|
|
puts "Error\#2 $err"
|
|
return
|
|
}
|
|
set list [concat $list [split $users "\n"]]
|
|
}
|
|
$fileselect(list) delete 0 end
|
|
foreach el $list {
|
|
if [string match $dir* $el] {
|
|
lappend listmatch $el
|
|
$fileselect(list) insert end $el
|
|
}
|
|
}
|
|
set addings [fileselect.gethead $listmatch]
|
|
if {$addings == ""} {
|
|
return
|
|
}
|
|
$fileselect(direntry) delete 0 end
|
|
if {[llength $listmatch] == 1} {
|
|
$fileselect(direntry) insert 0 [file dirname ~$addings/]
|
|
fileselect.getfiles [$fileselect(direntry) get]
|
|
} else {
|
|
$fileselect(direntry) insert 0 ~$addings
|
|
}
|
|
}
|
|
|
|
proc fileselect.tab.dircmd { } {
|
|
global fileselect
|
|
|
|
set dir [$fileselect(direntry) get]
|
|
if {$dir == ""} {
|
|
$fileselect(direntry) delete 0 end
|
|
$fileselect(direntry) insert 0 [pwd]
|
|
if [string compare [pwd] "/"] {
|
|
$fileselect(direntry) insert end /
|
|
}
|
|
return
|
|
}
|
|
if [catch {set tmp [file isdirectory [file dirname $dir]]}] {
|
|
if {[string index $dir 0] == "~"} {
|
|
fileselect.expand.tilde
|
|
}
|
|
return
|
|
}
|
|
if {!$tmp} {
|
|
return
|
|
}
|
|
set dirFile [fileselect.getfiledir 1 $dir]
|
|
if ![llength $dirFile] {
|
|
return
|
|
}
|
|
if {[llength $dirFile] == 1} {
|
|
$fileselect(direntry) delete 0 end
|
|
$fileselect(direntry) insert 0 [file dirname $dir]
|
|
if [string compare [file dirname $dir] /] {
|
|
$fileselect(direntry) insert end /[lindex $dirFile 0]/
|
|
} else {
|
|
$fileselect(direntry) insert end [lindex $dirFile 0]/
|
|
}
|
|
fileselect.getfiles [$fileselect(direntry) get] \
|
|
"[file tail [$fileselect(direntry) get]]$fileselect(pattern)" opt
|
|
return
|
|
}
|
|
set headFile [fileselect.gethead $dirFile]
|
|
$fileselect(direntry) delete 0 end
|
|
$fileselect(direntry) insert 0 [file dirname $dir]
|
|
if [string compare [file dirname $dir] /] {
|
|
$fileselect(direntry) insert end /$headFile
|
|
} else {
|
|
$fileselect(direntry) insert end $headFile
|
|
}
|
|
if {$headFile == "" && [file isdirectory $dir]} {
|
|
fileselect.getfiles $dir\
|
|
"[file tail [$fileselect(direntry) get]]$fileselect(pattern)" opt
|
|
} else {
|
|
fileselect.getfiles [file dirname $dir]\
|
|
"[file tail [$fileselect(direntry) get]]*" newdir
|
|
}
|
|
}
|
|
|
|
proc fileselect.tab.filecmd { } {
|
|
global fileselect
|
|
|
|
set dir [$fileselect(direntry) get]
|
|
if {$dir == ""} {
|
|
set dir [pwd]
|
|
}
|
|
if {![file isdirectory $dir]} {
|
|
error "dir $dir doesn't exist"
|
|
}
|
|
set listFile [fileselect.getfiledir 0 $dir]
|
|
puts $listFile
|
|
if ![llength $listFile] {
|
|
return
|
|
}
|
|
if {[llength $listFile] == 1} {
|
|
$fileselect(entry) delete 0 end
|
|
$fileselect(entry) insert 0 [lindex $listFile 0]
|
|
return
|
|
}
|
|
set headFile [fileselect.gethead $listFile]
|
|
$fileselect(entry) delete 0 end
|
|
$fileselect(entry) insert 0 $headFile
|
|
fileselect.getfiles $dir "[$fileselect(entry) get]$fileselect(pattern)" opt
|
|
}
|
|
|
|
proc Exwin_Toplevel { path name {class Dialog} {dismiss yes}} {
|
|
global exwin
|
|
if [catch {wm state $path} state] {
|
|
set t [Widget_Toplevel $path $name $class]
|
|
if ![info exists exwin(toplevels)] {
|
|
set exwin(toplevels) [option get . exwinPaths {}]
|
|
}
|
|
set ix [lsearch $exwin(toplevels) $t]
|
|
if {$ix < 0} {
|
|
lappend exwin(toplevels) $t
|
|
}
|
|
if {$dismiss == "yes"} {
|
|
set f [Widget_Frame $t but Menubar {top fill}]
|
|
Widget_AddBut $f quit "Dismiss" [list Exwin_Dismiss $path]
|
|
}
|
|
return 1
|
|
} else {
|
|
if {$state != "normal"} {
|
|
catch {
|
|
wm geometry $path $exwin(geometry,$path)
|
|
# Exmh_Debug Exwin_Toplevel $path $exwin(geometry,$path)
|
|
}
|
|
wm deiconify $path
|
|
} else {
|
|
catch {raise $path}
|
|
}
|
|
return 0
|
|
}
|
|
}
|
|
|
|
proc Exwin_Dismiss { path {geo ok} } {
|
|
global exwin
|
|
case $geo {
|
|
"ok" {
|
|
set exwin(geometry,$path) [wm geometry $path]
|
|
}
|
|
"nosize" {
|
|
set exwin(geometry,$path) [string trimleft [wm geometry $path] 0123456789x]
|
|
}
|
|
default {
|
|
catch {unset exwin(geometry,$path)}
|
|
}
|
|
}
|
|
wm withdraw $path
|
|
}
|
|
|
|
proc Widget_Toplevel { path name {class Dialog} {x {}} {y {}} } {
|
|
set self [toplevel $path -class $class]
|
|
set usergeo [option get $path position Position]
|
|
if {$usergeo != {}} {
|
|
if [catch {wm geometry $self $usergeo} err] {
|
|
# Exmh_Debug Widget_Toplevel $self $usergeo => $err
|
|
}
|
|
} else {
|
|
if {($x != {}) && ($y != {})} {
|
|
# Exmh_Debug Event position $self +$x+$y
|
|
wm geometry $self +$x+$y
|
|
}
|
|
}
|
|
wm title $self $name
|
|
wm group $self .
|
|
return $self
|
|
}
|
|
|
|
proc Widget_Frame {par child {class GDB} {where {top expand fill}} args } {
|
|
if {$par == "."} {
|
|
set self .$child
|
|
} else {
|
|
set self $par.$child
|
|
}
|
|
eval {frame $self -class $class} $args
|
|
pack append $par $self $where
|
|
return $self
|
|
}
|
|
|
|
proc Widget_AddBut {par but txt cmd {where {right padx 1}} } {
|
|
# Create a Packed button. Return the button pathname
|
|
set cmd2 [list button $par.$but -text $txt -command $cmd]
|
|
if [catch $cmd2 t] {
|
|
puts stderr "Widget_AddBut (warning) $t"
|
|
eval $cmd2 {-font fixed}
|
|
}
|
|
pack append $par $par.$but $where
|
|
return $par.$but
|
|
}
|
|
proc Widget_CheckBut {par but txt var {where {right padx 1}} } {
|
|
# Create a check button. Return the button pathname
|
|
set cmd [list checkbutton $par.$but -text $txt -variable $var]
|
|
if [catch $cmd t] {
|
|
puts stderr "Widget_CheckBut (warning) $t"
|
|
eval $cmd {-font fixed}
|
|
}
|
|
pack append $par $par.$but $where
|
|
return $par.$but
|
|
}
|
|
|
|
proc Widget_Label { frame {name label} {where {left fill}} args} {
|
|
set cmd [list label $frame.$name ]
|
|
if [catch [concat $cmd $args] t] {
|
|
puts stderr "Widget_Label (warning) $t"
|
|
eval $cmd $args {-font fixed}
|
|
}
|
|
pack append $frame $frame.$name $where
|
|
return $frame.$name
|
|
}
|
|
proc Widget_Entry { frame {name entry} {where {left fill}} args} {
|
|
set cmd [list entry $frame.$name ]
|
|
if [catch [concat $cmd $args] t] {
|
|
puts stderr "Widget_Entry (warning) $t"
|
|
eval $cmd $args {-font fixed}
|
|
}
|
|
pack append $frame $frame.$name $where
|
|
return $frame.$name
|
|
}
|
|
|
|
# End of fileselect.tcl.
|
|
|
|
# Setup the initial windows
|
|
|
|
create_source_window
|
|
|
|
if {[tk colormodel .src.text] == "color"} {
|
|
set highlight "-background red2 -borderwidth 2 -relief sunk"
|
|
} else {
|
|
set fg [lindex [.src.text config -foreground] 4]
|
|
set bg [lindex [.src.text config -background] 4]
|
|
set highlight "-foreground $bg -background $fg -borderwidth 0"
|
|
}
|
|
|
|
create_command_window
|
|
|
|
# Create a copyright window
|
|
|
|
update
|
|
toplevel .c
|
|
wm geometry .c +300+300
|
|
wm overrideredirect .c true
|
|
|
|
message .c.m -text [gdb_cmd "show version"] -aspect 500 -relief raised
|
|
pack .c.m
|
|
bind .c.m <Leave> {destroy .c}
|
|
update
|
|
|
|
if [file exists ~/.gdbtkinit] {
|
|
source ~/.gdbtkinit
|
|
}
|