edb3359dff
* NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
940 lines
32 KiB
Plaintext
940 lines
32 KiB
Plaintext
# Copyright 1988, 1990, 1991, 1992, 1994, 1995, 1996, 1997, 1998, 1999,
|
|
# 2000, 2002, 2003, 2007, 2008, 2009 Free Software Foundation, Inc.
|
|
|
|
# This program is free software; you can redistribute it and/or modify
|
|
# it under the terms of the GNU General Public License as published by
|
|
# the Free Software Foundation; either version 3 of the License, or
|
|
# (at your option) any later version.
|
|
#
|
|
# This program is distributed in the hope that it will be useful,
|
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
# GNU General Public License for more details.
|
|
#
|
|
# You should have received a copy of the GNU General Public License
|
|
# along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
# This file was written by Rob Savoye. (rob@cygnus.com)
|
|
|
|
if { [prepare_for_testing break.exp "break" {break.c break1.c} {debug nowarnings}] } {
|
|
return -1
|
|
}
|
|
set srcfile break.c
|
|
set srcfile1 break1.c
|
|
#
|
|
# test simple breakpoint setting commands
|
|
#
|
|
|
|
# Test deleting all breakpoints when there are none installed,
|
|
# GDB should not prompt for confirmation.
|
|
# Note that lib/gdb.exp provides a "delete_breakpoints" proc
|
|
# for general use elsewhere.
|
|
|
|
send_gdb "delete breakpoints\n"
|
|
gdb_expect {
|
|
-re "Delete all breakpoints.*$" {
|
|
send_gdb "y\n"
|
|
gdb_expect {
|
|
-re "$gdb_prompt $" {
|
|
fail "Delete all breakpoints when none (unexpected prompt)"
|
|
}
|
|
timeout { fail "Delete all breakpoints when none (timeout after unexpected prompt)" }
|
|
}
|
|
}
|
|
-re ".*$gdb_prompt $" { pass "Delete all breakpoints when none" }
|
|
timeout { fail "Delete all breakpoints when none (timeout)" }
|
|
}
|
|
|
|
#
|
|
# test break at function
|
|
#
|
|
gdb_test "break main" \
|
|
"Breakpoint.*at.* file .*$srcfile, line.*" \
|
|
"breakpoint function"
|
|
|
|
#
|
|
# test break at quoted function
|
|
#
|
|
gdb_test "break \"marker2\"" \
|
|
"Breakpoint.*at.* file .*$srcfile1, line.*" \
|
|
"breakpoint quoted function"
|
|
|
|
#
|
|
# test break at function in file
|
|
#
|
|
gdb_test "break $srcfile:factorial" \
|
|
"Breakpoint.*at.* file .*$srcfile, line.*" \
|
|
"breakpoint function in file"
|
|
|
|
set bp_location1 [gdb_get_line_number "set breakpoint 1 here"]
|
|
|
|
#
|
|
# test break at line number
|
|
#
|
|
# Note that the default source file is the last one whose source text
|
|
# was printed. For native debugging, before we've executed the
|
|
# program, this is the file containing main, but for remote debugging,
|
|
# it's wherever the processor was stopped when we connected to the
|
|
# board. So, to be sure, we do a list command.
|
|
#
|
|
gdb_test "list main" \
|
|
".*main \\(argc, argv, envp\\).*" \
|
|
"use `list' to establish default source file"
|
|
gdb_test "break $bp_location1" \
|
|
"Breakpoint.*at.* file .*$srcfile, line $bp_location1\\." \
|
|
"breakpoint line number"
|
|
|
|
#
|
|
# test duplicate breakpoint
|
|
#
|
|
gdb_test "break $bp_location1" \
|
|
"Note: breakpoint \[0-9\]+ also set at pc.*Breakpoint \[0-9\]+ at.* file .*$srcfile, line $bp_location1\\." \
|
|
"breakpoint duplicate"
|
|
|
|
set bp_location2 [gdb_get_line_number "set breakpoint 2 here"]
|
|
|
|
#
|
|
# test break at line number in file
|
|
#
|
|
gdb_test "break $srcfile:$bp_location2" \
|
|
"Breakpoint.*at.* file .*$srcfile, line $bp_location2\\." \
|
|
"breakpoint line number in file"
|
|
|
|
set bp_location3 [gdb_get_line_number "set breakpoint 3 here"]
|
|
set bp_location4 [gdb_get_line_number "set breakpoint 4 here"]
|
|
|
|
#
|
|
# Test putting a break at the start of a multi-line if conditional.
|
|
# Verify the breakpoint was put at the start of the conditional.
|
|
#
|
|
gdb_test "break multi_line_if_conditional" \
|
|
"Breakpoint.*at.* file .*$srcfile, line $bp_location3\\." \
|
|
"breakpoint at start of multi line if conditional"
|
|
|
|
gdb_test "break multi_line_while_conditional" \
|
|
"Breakpoint.*at.* file .*$srcfile, line $bp_location4\\." \
|
|
"breakpoint at start of multi line while conditional"
|
|
|
|
set bp_location5 [gdb_get_line_number "set breakpoint 5 here"]
|
|
set bp_location6 [gdb_get_line_number "set breakpoint 6 here"]
|
|
|
|
#
|
|
# check to see what breakpoints are set
|
|
#
|
|
if [target_info exists gdb_stub] {
|
|
set main_line $bp_location5
|
|
} else {
|
|
set main_line $bp_location6
|
|
}
|
|
|
|
if {$hp_aCC_compiler} {
|
|
set proto "\\(int\\)"
|
|
} else {
|
|
set proto ""
|
|
}
|
|
|
|
set bp_location7 [gdb_get_line_number "set breakpoint 7 here"]
|
|
set bp_location8 [gdb_get_line_number "set breakpoint 8 here" $srcfile1]
|
|
set bp_location9 [gdb_get_line_number "set breakpoint 9 here" $srcfile1]
|
|
|
|
gdb_test "info break" \
|
|
"Num Type\[ \]+Disp Enb Address\[ \]+What.*
|
|
\[0-9\]+\[\t \]+breakpoint keep y.* in main at .*$srcfile:$main_line.*
|
|
\[0-9\]+\[\t \]+breakpoint keep y.* in marker2 at .*$srcfile1:($bp_location8|$bp_location9).*
|
|
\[0-9\]+\[\t \]+breakpoint keep y.* in factorial$proto at .*$srcfile:$bp_location7.*
|
|
\[0-9\]+\[\t \]+breakpoint keep y.* in main at .*$srcfile:$bp_location1.*
|
|
\[0-9\]+\[\t \]+breakpoint keep y.* in main at .*$srcfile:$bp_location1.*
|
|
\[0-9\]+\[\t \]+breakpoint keep y.* in main at .*$srcfile:$bp_location2.*
|
|
\[0-9\]+\[\t \]+breakpoint keep y.* in multi_line_if_conditional at .*$srcfile:$bp_location3.*
|
|
\[0-9\]+\[\t \]+breakpoint keep y.* in multi_line_while_conditional at .*$srcfile:$bp_location4" \
|
|
"breakpoint info"
|
|
|
|
# FIXME: The rest of this test doesn't work with anything that can't
|
|
# handle arguments.
|
|
# Huh? There doesn't *appear* to be anything that passes arguments
|
|
# below.
|
|
if [istarget "mips-idt-*"] then {
|
|
return
|
|
}
|
|
|
|
#
|
|
# run until the breakpoint at main is hit. For non-stubs-using targets.
|
|
#
|
|
gdb_run_cmd
|
|
gdb_expect {
|
|
-re "Breakpoint \[0-9\]+,.*main .*argc.*argv.* at .*$srcfile:$bp_location6.*$bp_location6\[\t \]+if .argc.* \{.*$gdb_prompt $" {
|
|
pass "run until function breakpoint"
|
|
}
|
|
-re "$gdb_prompt $" {
|
|
fail "run until function breakpoint"
|
|
}
|
|
timeout {
|
|
fail "run until function breakpoint (timeout)"
|
|
}
|
|
}
|
|
|
|
#
|
|
# run until the breakpoint at a line number
|
|
#
|
|
gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:$bp_location1.*$bp_location1\[\t \]+printf.*factorial.*" \
|
|
"run until breakpoint set at a line number"
|
|
|
|
#
|
|
# Run until the breakpoint set in a function in a file
|
|
#
|
|
for {set i 6} {$i >= 1} {incr i -1} {
|
|
gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, factorial \\(value=$i\\) at .*$srcfile:$bp_location7.*$bp_location7\[\t \]+.*if .value > 1. \{.*" \
|
|
"run until file:function($i) breakpoint"
|
|
}
|
|
|
|
#
|
|
# Run until the breakpoint set at a quoted function
|
|
#
|
|
gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, (0x\[0-9a-f\]+ in )?marker2 \\(a=43\\) at .*$srcfile1:($bp_location8|$bp_location9).*" \
|
|
"run until quoted breakpoint"
|
|
#
|
|
# run until the file:function breakpoint at a line number in a file
|
|
#
|
|
gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:$bp_location2.*$bp_location2\[\t \]+argc = \\(argc == 12345\\);.*" \
|
|
"run until file:linenum breakpoint"
|
|
|
|
# Test break at offset +1
|
|
set bp_location10 [gdb_get_line_number "set breakpoint 10 here"]
|
|
|
|
gdb_test "break +1" \
|
|
"Breakpoint.*at.* file .*$srcfile, line $bp_location10\\." \
|
|
"breakpoint offset +1"
|
|
|
|
# Check to see if breakpoint is hit when stepped onto
|
|
|
|
gdb_test "step" \
|
|
".*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:$bp_location10.*$bp_location10\[\t \]+return argc;.*breakpoint 10 here.*" \
|
|
"step onto breakpoint"
|
|
|
|
# Check to see if breakpoint can be set on ending brace of function
|
|
set bp_location10a [gdb_get_line_number "set breakpoint 10a here"]
|
|
|
|
gdb_test "break $bp_location10a" \
|
|
"Breakpoint.*at.* file .*$srcfile, line $bp_location10a\\." \
|
|
"setting breakpoint at }"
|
|
|
|
gdb_test "continue" \
|
|
".*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:$bp_location10a.*$bp_location10a\[\t \]+}.*breakpoint 10a here.*" \
|
|
"continue to breakpoint at }"
|
|
|
|
#
|
|
# delete all breakpoints so we can start over, course this can be a test too
|
|
#
|
|
delete_breakpoints
|
|
|
|
#
|
|
# test temporary breakpoint at function
|
|
#
|
|
|
|
gdb_test "tbreak main" "Temporary breakpoint.*at.* file .*$srcfile, line.*" "Temporary breakpoint function"
|
|
|
|
#
|
|
# test break at function in file
|
|
#
|
|
|
|
gdb_test "tbreak $srcfile:factorial" "Temporary breakpoint.*at.* file .*$srcfile, line.*" \
|
|
"Temporary breakpoint function in file"
|
|
|
|
#
|
|
# test break at line number
|
|
#
|
|
send_gdb "tbreak $bp_location1\n"
|
|
gdb_expect {
|
|
-re "Temporary breakpoint.*at.* file .*$srcfile, line $bp_location1.*$gdb_prompt $" {
|
|
pass "Temporary breakpoint line number #1"
|
|
}
|
|
-re ".*$gdb_prompt $" {
|
|
fail "Temporary breakpoint line number #1"
|
|
}
|
|
timeout {
|
|
fail "Temporary breakpoint line number #1 (timeout)"
|
|
}
|
|
}
|
|
|
|
gdb_test "tbreak $bp_location6" "Temporary breakpoint.*at.* file .*$srcfile, line $bp_location6.*" "Temporary breakpoint line number #2"
|
|
|
|
#
|
|
# test break at line number in file
|
|
#
|
|
send_gdb "tbreak $srcfile:$bp_location2\n"
|
|
gdb_expect {
|
|
-re "Temporary breakpoint.*at.* file .*$srcfile, line $bp_location2.*$gdb_prompt $" {
|
|
pass "Temporary breakpoint line number in file #1"
|
|
}
|
|
-re ".*$gdb_prompt $" {
|
|
fail "Temporary breakpoint line number in file #1"
|
|
}
|
|
timeout {
|
|
fail "Temporary breakpoint line number in file #1 (timeout)"
|
|
}
|
|
}
|
|
|
|
set bp_location11 [gdb_get_line_number "set breakpoint 11 here"]
|
|
gdb_test "tbreak $srcfile:$bp_location11" "Temporary breakpoint.*at.* file .*$srcfile, line $bp_location11.*" "Temporary breakpoint line number in file #2"
|
|
|
|
#
|
|
# check to see what breakpoints are set (temporary this time)
|
|
#
|
|
gdb_test "info break" "Num Type.*Disp Enb Address.*What.*\[\r\n\]
|
|
\[0-9\]+\[\t \]+breakpoint del.*y.*in main at .*$srcfile:$main_line.*\[\r\n\]
|
|
\[0-9\]+\[\t \]+breakpoint del.*y.*in factorial$proto at .*$srcfile:$bp_location7.*\[\r\n\]
|
|
\[0-9\]+\[\t \]+breakpoint del.*y.*in main at .*$srcfile:$bp_location1.*\[\r\n\]
|
|
\[0-9\]+\[\t \]+breakpoint del.*y.*in main at .*$srcfile:$bp_location6.*\[\r\n\]
|
|
\[0-9\]+\[\t \]+breakpoint del.*y.*in main at .*$srcfile:$bp_location2.*\[\r\n\]
|
|
\[0-9\]+\[\t \]+breakpoint del.*y.*in main at .*$srcfile:$bp_location11.*" \
|
|
"Temporary breakpoint info"
|
|
|
|
|
|
#***********
|
|
|
|
# Verify that catchpoints for fork, vfork and exec don't trigger
|
|
# inappropriately. (There are no calls to those system functions
|
|
# in this test program.)
|
|
#
|
|
if ![runto_main] then { fail "break tests suppressed" }
|
|
|
|
send_gdb "catch\n"
|
|
gdb_expect {
|
|
-re "Catch requires an event name.*$gdb_prompt $"\
|
|
{pass "catch requires an event name"}
|
|
-re "$gdb_prompt $"\
|
|
{fail "catch requires an event name"}
|
|
timeout {fail "(timeout) catch requires an event name"}
|
|
}
|
|
|
|
|
|
set name "set catch fork, never expected to trigger"
|
|
send_gdb "catch fork\n"
|
|
gdb_expect {
|
|
-re "Catchpoint \[0-9\]* .fork..*$gdb_prompt $"
|
|
{pass $name}
|
|
-re "Catch of fork not yet implemented.*$gdb_prompt $"
|
|
{pass $name}
|
|
-re "$gdb_prompt $"
|
|
{fail $name}
|
|
timeout {fail "(timeout) $name"}
|
|
}
|
|
|
|
|
|
set name "set catch vfork, never expected to trigger"
|
|
send_gdb "catch vfork\n"
|
|
|
|
# If we are on HP-UX 10.20, we expect an error message to be
|
|
# printed if we type "catch vfork" at the gdb gdb_prompt. This is
|
|
# because on HP-UX 10.20, we cannot catch vfork events.
|
|
|
|
if [istarget "hppa*-hp-hpux10.20"] then {
|
|
gdb_expect {
|
|
-re "Catch of vfork events not supported on HP-UX 10.20..*$gdb_prompt $"
|
|
{pass $name}
|
|
-re "$gdb_prompt $"
|
|
{fail $name}
|
|
timeout {fail "(timeout) $name"}
|
|
}
|
|
} else {
|
|
gdb_expect {
|
|
-re "Catchpoint \[0-9\]* .vfork..*$gdb_prompt $"
|
|
{pass $name}
|
|
-re "Catch of vfork not yet implemented.*$gdb_prompt $"
|
|
{pass $name}
|
|
-re "$gdb_prompt $"
|
|
{fail $name}
|
|
timeout {fail "(timeout) $name"}
|
|
}
|
|
}
|
|
|
|
set name "set catch exec, never expected to trigger"
|
|
send_gdb "catch exec\n"
|
|
gdb_expect {
|
|
-re "Catchpoint \[0-9\]* .exec..*$gdb_prompt $"
|
|
{pass $name}
|
|
-re "Catch of exec not yet implemented.*$gdb_prompt $"
|
|
{pass $name}
|
|
-re "$gdb_prompt $" {fail $name}
|
|
timeout {fail "(timeout) $name"}
|
|
}
|
|
|
|
# Verify that GDB responds gracefully when asked to set a breakpoint
|
|
# on a nonexistent source line.
|
|
#
|
|
send_gdb "break 999\n"
|
|
gdb_expect {
|
|
-re "No line 999 in file .*$gdb_prompt $"\
|
|
{pass "break on non-existent source line"}
|
|
-re "$gdb_prompt $"\
|
|
{fail "break on non-existent source line"}
|
|
timeout {fail "(timeout) break on non-existent source line"}
|
|
}
|
|
|
|
# Run to the desired default location. If not positioned here, the
|
|
# tests below don't work.
|
|
#
|
|
gdb_test "until $bp_location1" "main .* at .*:$bp_location1.*" "until bp_location1"
|
|
|
|
|
|
# Verify that GDB allows one to just say "break", which is treated
|
|
# as the "default" breakpoint. Note that GDB gets cute when printing
|
|
# the informational message about other breakpoints at the same
|
|
# location. We'll hit that bird with this stone too.
|
|
#
|
|
send_gdb "break\n"
|
|
gdb_expect {
|
|
-re "Breakpoint \[0-9\]*.*$gdb_prompt $"\
|
|
{pass "break on default location, 1st time"}
|
|
-re "$gdb_prompt $"\
|
|
{fail "break on default location, 1st time"}
|
|
timeout {fail "(timeout) break on default location, 1st time"}
|
|
}
|
|
|
|
send_gdb "break\n"
|
|
gdb_expect {
|
|
-re "Note: breakpoint \[0-9\]* also set at .*Breakpoint \[0-9\]*.*$gdb_prompt $"\
|
|
{pass "break on default location, 2nd time"}
|
|
-re "$gdb_prompt $"\
|
|
{fail "break on default location, 2nd time"}
|
|
timeout {fail "(timeout) break on default location, 2nd time"}
|
|
}
|
|
|
|
send_gdb "break\n"
|
|
gdb_expect {
|
|
-re "Note: breakpoints \[0-9\]* and \[0-9\]* also set at .*Breakpoint \[0-9\]*.*$gdb_prompt $"\
|
|
{pass "break on default location, 3rd time"}
|
|
-re "$gdb_prompt $"\
|
|
{fail "break on default location, 3rd time"}
|
|
timeout {fail "(timeout) break on default location, 3rd time"}
|
|
}
|
|
|
|
send_gdb "break\n"
|
|
gdb_expect {
|
|
-re "Note: breakpoints \[0-9\]*, \[0-9\]* and \[0-9\]* also set at .*Breakpoint \[0-9\]*.*$gdb_prompt $"\
|
|
{pass "break on default location, 4th time"}
|
|
-re "$gdb_prompt $"\
|
|
{fail "break on default location, 4th time"}
|
|
timeout {fail "(timeout) break on default location, 4th time"}
|
|
}
|
|
|
|
# Verify that a "silent" breakpoint can be set, and that GDB is indeed
|
|
# "silent" about its triggering.
|
|
#
|
|
if ![runto_main] then { fail "break tests suppressed" }
|
|
|
|
send_gdb "break $bp_location1\n"
|
|
gdb_expect {
|
|
-re "Breakpoint (\[0-9\]*) at .*, line $bp_location1.*$gdb_prompt $"\
|
|
{pass "set to-be-silent break bp_location1"}
|
|
-re "$gdb_prompt $"\
|
|
{fail "set to-be-silent break bp_location1"}
|
|
timeout {fail "(timeout) set to-be-silent break bp_location1"}
|
|
}
|
|
|
|
send_gdb "commands $expect_out(1,string)\n"
|
|
send_gdb "silent\n"
|
|
send_gdb "end\n"
|
|
gdb_expect {
|
|
-re ".*$gdb_prompt $"\
|
|
{pass "set silent break bp_location1"}
|
|
timeout {fail "(timeout) set silent break bp_location1"}
|
|
}
|
|
|
|
send_gdb "info break $expect_out(1,string)\n"
|
|
gdb_expect {
|
|
-re "\[0-9\]*\[ \t\]*breakpoint.*:$bp_location1\r\n\[ \t\]*silent.*$gdb_prompt $"\
|
|
{pass "info silent break bp_location1"}
|
|
-re "$gdb_prompt $"\
|
|
{fail "info silent break bp_location1"}
|
|
timeout {fail "(timeout) info silent break bp_location1"}
|
|
}
|
|
send_gdb "continue\n"
|
|
gdb_expect {
|
|
-re "Continuing.\r\n$gdb_prompt $"\
|
|
{pass "hit silent break bp_location1"}
|
|
-re "$gdb_prompt $"\
|
|
{fail "hit silent break bp_location1"}
|
|
timeout {fail "(timeout) hit silent break bp_location1"}
|
|
}
|
|
send_gdb "bt\n"
|
|
gdb_expect {
|
|
-re "#0 main .* at .*:$bp_location1.*$gdb_prompt $"\
|
|
{pass "stopped for silent break bp_location1"}
|
|
-re "$gdb_prompt $"\
|
|
{fail "stopped for silent break bp_location1"}
|
|
timeout {fail "(timeout) stopped for silent break bp_location1"}
|
|
}
|
|
|
|
# Verify that GDB can at least parse a breakpoint with the
|
|
# "thread" keyword. (We won't attempt to test here that a
|
|
# thread-specific breakpoint really triggers appropriately.
|
|
# The gdb.threads subdirectory contains tests for that.)
|
|
#
|
|
set bp_location12 [gdb_get_line_number "set breakpoint 12 here"]
|
|
send_gdb "break $bp_location12 thread 999\n"
|
|
gdb_expect {
|
|
-re "Unknown thread 999.*$gdb_prompt $"\
|
|
{pass "thread-specific breakpoint on non-existent thread disallowed"}
|
|
-re "$gdb_prompt $"\
|
|
{fail "thread-specific breakpoint on non-existent thread disallowed"}
|
|
timeout {fail "(timeout) thread-specific breakpoint on non-existent thread disallowed"}
|
|
}
|
|
send_gdb "break $bp_location12 thread foo\n"
|
|
gdb_expect {
|
|
-re "Junk after thread keyword..*$gdb_prompt $"\
|
|
{pass "thread-specific breakpoint on bogus thread ID disallowed"}
|
|
-re "$gdb_prompt $"\
|
|
{fail "thread-specific breakpoint on bogus thread ID disallowed"}
|
|
timeout {fail "(timeout) thread-specific breakpoint on bogus thread ID disallowed"}
|
|
}
|
|
|
|
# Verify that GDB responds gracefully to a breakpoint command with
|
|
# trailing garbage.
|
|
#
|
|
send_gdb "break $bp_location12 foo\n"
|
|
gdb_expect {
|
|
-re "Junk at end of arguments..*$gdb_prompt $"\
|
|
{pass "breakpoint with trailing garbage disallowed"}
|
|
-re "$gdb_prompt $"\
|
|
{fail "breakpoint with trailing garbage disallowed"}
|
|
timeout {fail "(timeout) breakpoint with trailing garbage disallowed"}
|
|
}
|
|
|
|
# Verify that GDB responds gracefully to a "clear" command that has
|
|
# no matching breakpoint. (First, get us off the current source line,
|
|
# which we know has a breakpoint.)
|
|
#
|
|
send_gdb "next\n"
|
|
gdb_expect {
|
|
-re ".*$gdb_prompt $"\
|
|
{pass "step over breakpoint"}
|
|
timeout {fail "(timeout) step over breakpoint"}
|
|
}
|
|
send_gdb "clear 81\n"
|
|
gdb_expect {
|
|
-re "No breakpoint at 81..*$gdb_prompt $"\
|
|
{pass "clear line has no breakpoint disallowed"}
|
|
-re "$gdb_prompt $"\
|
|
{fail "clear line has no breakpoint disallowed"}
|
|
timeout {fail "(timeout) clear line has no breakpoint disallowed"}
|
|
}
|
|
send_gdb "clear\n"
|
|
gdb_expect {
|
|
-re "No breakpoint at this line..*$gdb_prompt $"\
|
|
{pass "clear current line has no breakpoint disallowed"}
|
|
-re "$gdb_prompt $"\
|
|
{fail "clear current line has no breakpoint disallowed"}
|
|
timeout {fail "(timeout) clear current line has no breakpoint disallowed"}
|
|
}
|
|
|
|
# Verify that we can set and clear multiple breakpoints.
|
|
#
|
|
# We don't test that it deletes the correct breakpoints. We do at
|
|
# least test that it deletes more than one breakpoint.
|
|
#
|
|
gdb_test "break marker3" "Breakpoint.*at.*" "break marker3 #1"
|
|
gdb_test "break marker3" "Breakpoint.*at.*" "break marker3 #2"
|
|
gdb_test "clear marker3" {Deleted breakpoints [0-9]+ [0-9]+.*}
|
|
|
|
# Verify that a breakpoint can be set via a convenience variable.
|
|
#
|
|
send_gdb "set \$foo=$bp_location11\n"
|
|
gdb_expect {
|
|
-re "$gdb_prompt $"\
|
|
{pass "set convenience variable \$foo to bp_location11"}
|
|
timeout {fail "(timeout) set convenience variable \$foo to bp_location11"}
|
|
}
|
|
send_gdb "break \$foo\n"
|
|
gdb_expect {
|
|
-re "Breakpoint (\[0-9\]*) at .*, line $bp_location11.*$gdb_prompt $"\
|
|
{pass "set breakpoint via convenience variable"}
|
|
-re "$gdb_prompt $"\
|
|
{fail "set breakpoint via convenience variable"}
|
|
timeout {fail "(timeout) set breakpoint via convenience variable"}
|
|
}
|
|
|
|
# Verify that GDB responds gracefully to an attempt to set a
|
|
# breakpoint via a convenience variable whose type is not integer.
|
|
#
|
|
send_gdb "set \$foo=81.5\n"
|
|
gdb_expect {
|
|
-re "$gdb_prompt $"\
|
|
{pass "set convenience variable \$foo to 81.5"}
|
|
timeout {fail "(timeout) set convenience variable \$foo to 81.5"}
|
|
}
|
|
send_gdb "break \$foo\n"
|
|
gdb_expect {
|
|
-re "Convenience variables used in line specs must have integer values..*$gdb_prompt $"\
|
|
{pass "set breakpoint via non-integer convenience variable disallowed"}
|
|
-re "$gdb_prompt $"\
|
|
{fail "set breakpoint via non-integer convenience variable disallowed"}
|
|
timeout {fail "(timeout) set breakpoint via non-integer convenience variable disallowed"}
|
|
}
|
|
|
|
# Verify that we can set and trigger a breakpoint in a user-called function.
|
|
#
|
|
send_gdb "break marker2\n"
|
|
gdb_expect {
|
|
-re "Breakpoint (\[0-9\]*) at .*, line ($bp_location8|$bp_location9).*$gdb_prompt $"\
|
|
{pass "set breakpoint on to-be-called function"}
|
|
-re "$gdb_prompt $"\
|
|
{fail "set breakpoint on to-be-called function"}
|
|
timeout {fail "(timeout) set breakpoint on to-be-called function"}
|
|
}
|
|
send_gdb "print marker2(99)\n"
|
|
gdb_expect {
|
|
-re "The program being debugged stopped while in a function called from GDB.\r\nEvaluation of the expression containing the function\r\n.marker2$proto. will be abandoned.\r\nWhen the function is done executing, GDB will silently stop..*$gdb_prompt $"\
|
|
{pass "hit breakpoint on called function"}
|
|
-re "$gdb_prompt $"\
|
|
{fail "hit breakpoint on called function"}
|
|
timeout {fail "(timeout) hit breakpoint on called function"}
|
|
}
|
|
|
|
# As long as we're stopped (breakpointed) in a called function,
|
|
# verify that we can successfully backtrace & such from here.
|
|
#
|
|
# In this and the following test, the _sr4export check apparently is needed
|
|
# for hppa*-*-hpux.
|
|
#
|
|
send_gdb "bt\n"
|
|
gdb_expect {
|
|
-re "#0\[ \t\]*($hex in )?marker2.*:($bp_location8|$bp_location9)\r\n#1.*_sr4export.*$gdb_prompt $"\
|
|
{pass "backtrace while in called function"}
|
|
-re "#0\[ \t\]*($hex in )?marker2.*:($bp_location8|$bp_location9)\r\n#1.*function called from gdb.*$gdb_prompt $"\
|
|
{pass "backtrace while in called function"}
|
|
-re "$gdb_prompt $"\
|
|
{fail "backtrace while in called function"}
|
|
timeout {fail "(timeout) backtrace while in called function"}
|
|
}
|
|
|
|
# Return from the called function. For remote targets, it's important to do
|
|
# this before runto_main, which otherwise may silently stop on the dummy
|
|
# breakpoint inserted by GDB at the program's entry point.
|
|
#
|
|
send_gdb "finish\n"
|
|
gdb_expect {
|
|
-re "Run till exit from .*marker2.* at .*($bp_location8|$bp_location9)\r\n.* in _sr4export.*$gdb_prompt $"\
|
|
{pass "finish from called function"}
|
|
-re "Run till exit from .*marker2.* at .*($bp_location8|$bp_location9)\r\n.*function called from gdb.*$gdb_prompt $"\
|
|
{pass "finish from called function"}
|
|
-re "Run till exit from .*marker2.* at .*($bp_location8|$bp_location9)\r\n.*Value returned.*$gdb_prompt $"\
|
|
{pass "finish from called function"}
|
|
-re "$gdb_prompt $"\
|
|
{fail "finish from called function"}
|
|
timeout {fail "(timeout) finish from called function"}
|
|
}
|
|
|
|
# Verify that GDB responds gracefully to a "finish" command with
|
|
# arguments.
|
|
#
|
|
if ![runto_main] then { fail "break tests suppressed" }
|
|
|
|
send_gdb "finish 123\n"
|
|
gdb_expect {
|
|
-re "The \"finish\" command does not take any arguments.\r\n$gdb_prompt $"\
|
|
{pass "finish with arguments disallowed"}
|
|
-re "$gdb_prompt $"\
|
|
{fail "finish with arguments disallowed"}
|
|
timeout {fail "(timeout) finish with arguments disallowed"}
|
|
}
|
|
|
|
# Verify that GDB responds gracefully to a request to "finish" from
|
|
# the outermost frame. On a stub that never exits, this will just
|
|
# run to the stubs routine, so we don't get this error... Thus the
|
|
# second condition.
|
|
#
|
|
|
|
send_gdb "finish\n"
|
|
gdb_expect {
|
|
-re "\"finish\" not meaningful in the outermost frame.\r\n$gdb_prompt $"\
|
|
{pass "finish from outermost frame disallowed"}
|
|
-re "Run till exit from.*\r\n$gdb_prompt $" {
|
|
pass "finish from outermost frame disallowed"
|
|
}
|
|
-re "$gdb_prompt $"\
|
|
{fail "finish from outermost frame disallowed"}
|
|
timeout {fail "(timeout) finish from outermost frame disallowed"}
|
|
}
|
|
|
|
# Verify that we can explicitly ask GDB to stop on all shared library
|
|
# events, and that it does so.
|
|
#
|
|
if [istarget "hppa*-*-hpux*"] then {
|
|
if ![runto_main] then { fail "break tests suppressed" }
|
|
|
|
send_gdb "set stop-on-solib-events 1\n"
|
|
gdb_expect {
|
|
-re "$gdb_prompt $"\
|
|
{pass "set stop-on-solib-events"}
|
|
timeout {fail "(timeout) set stop-on-solib-events"}
|
|
}
|
|
|
|
send_gdb "run\n"
|
|
gdb_expect {
|
|
-re ".*Start it from the beginning.*y or n. $"\
|
|
{send_gdb "y\n"
|
|
gdb_expect {
|
|
-re ".*Stopped due to shared library event.*$gdb_prompt $"\
|
|
{pass "triggered stop-on-solib-events"}
|
|
-re "$gdb_prompt $"\
|
|
{fail "triggered stop-on-solib-events"}
|
|
timeout {fail "(timeout) triggered stop-on-solib-events"}
|
|
}
|
|
}
|
|
-re "$gdb_prompt $"\
|
|
{fail "rerun for stop-on-solib-events"}
|
|
timeout {fail "(timeout) rerun for stop-on-solib-events"}
|
|
}
|
|
|
|
send_gdb "set stop-on-solib-events 0\n"
|
|
gdb_expect {
|
|
-re "$gdb_prompt $"\
|
|
{pass "reset stop-on-solib-events"}
|
|
timeout {fail "(timeout) reset stop-on-solib-events"}
|
|
}
|
|
}
|
|
|
|
# Hardware breakpoints are unsupported on HP-UX. Verify that GDB
|
|
# gracefully responds to requests to create them.
|
|
#
|
|
if [istarget "hppa*-*-hpux*"] then {
|
|
if ![runto_main] then { fail "break tests suppressed" }
|
|
|
|
send_gdb "hbreak\n"
|
|
gdb_expect {
|
|
-re "No hardware breakpoint support in the target.*$gdb_prompt $"\
|
|
{pass "hw breaks disallowed"}
|
|
-re "$gdb_prompt $"\
|
|
{fail "hw breaks disallowed"}
|
|
timeout {fail "(timeout) hw breaks disallowed"}
|
|
}
|
|
|
|
send_gdb "thbreak\n"
|
|
gdb_expect {
|
|
-re "No hardware breakpoint support in the target.*$gdb_prompt $"\
|
|
{pass "temporary hw breaks disallowed"}
|
|
-re "$gdb_prompt $"\
|
|
{fail "temporary hw breaks disallowed"}
|
|
timeout {fail "(timeout) temporary hw breaks disallowed"}
|
|
}
|
|
}
|
|
|
|
#********
|
|
|
|
|
|
#
|
|
# Test "next" over recursive function call.
|
|
#
|
|
|
|
proc test_next_with_recursion {} {
|
|
global gdb_prompt
|
|
global decimal
|
|
global binfile
|
|
|
|
gdb_test "kill" "" "kill program" "Kill the program being debugged.*y or n. $" "y"
|
|
delete_breakpoints
|
|
|
|
gdb_test "break factorial" "Breakpoint $decimal at .*" "break at factorial"
|
|
|
|
# Run until we call factorial with 6
|
|
|
|
gdb_run_cmd
|
|
gdb_expect {
|
|
-re "Break.* factorial .value=6. .*$gdb_prompt $" {}
|
|
-re ".*$gdb_prompt $" {
|
|
fail "run to factorial(6)";
|
|
gdb_suppress_tests;
|
|
}
|
|
timeout { fail "run to factorial(6) (timeout)" ; gdb_suppress_tests }
|
|
}
|
|
|
|
# Continue until we call factorial recursively with 5.
|
|
|
|
if [gdb_test "continue" \
|
|
"Continuing.*Break.* factorial .value=5. .*" \
|
|
"continue to factorial(5)"] then { gdb_suppress_tests }
|
|
|
|
# Do a backtrace just to confirm how many levels deep we are.
|
|
|
|
if [gdb_test "backtrace" \
|
|
"#0\[ \t\]+ factorial .value=5..*" \
|
|
"backtrace from factorial(5)"] then { gdb_suppress_tests }
|
|
|
|
# Now a "next" should position us at the recursive call, which
|
|
# we will be performing with 4.
|
|
|
|
if [gdb_test "next" \
|
|
".* factorial .value - 1.;.*" \
|
|
"next to recursive call"] then { gdb_suppress_tests }
|
|
|
|
# Disable the breakpoint at the entry to factorial by deleting them all.
|
|
# The "next" should run until we return to the next line from this
|
|
# recursive call to factorial with 4.
|
|
# Buggy versions of gdb will stop instead at the innermost frame on
|
|
# the line where we are trying to "next" to.
|
|
|
|
delete_breakpoints
|
|
|
|
if [istarget "mips*tx39-*"] {
|
|
set timeout 60
|
|
}
|
|
# We used to set timeout here for all other targets as well. This
|
|
# is almost certainly wrong. The proper timeout depends on the
|
|
# target system in use, and how we communicate with it, so there
|
|
# is no single value appropriate for all targets. The timeout
|
|
# should be established by the Dejagnu config file(s) for the
|
|
# board, and respected by the test suite.
|
|
#
|
|
# For example, if I'm running GDB over an SSH tunnel talking to a
|
|
# portmaster in California talking to an ancient 68k board running
|
|
# a crummy ROM monitor (a situation I can only wish were
|
|
# hypothetical), then I need a large timeout. But that's not the
|
|
# kind of knowledge that belongs in this file.
|
|
|
|
gdb_test next "\[0-9\]*\[\t \]+return \\(value\\);.*" \
|
|
"next over recursive call"
|
|
|
|
# OK, we should be back in the same stack frame we started from.
|
|
# Do a backtrace just to confirm.
|
|
|
|
set result [gdb_test "backtrace" \
|
|
"#0\[ \t\]+ factorial .value=120.*\r\n#1\[ \t\]+ \[0-9a-fx\]+ in factorial .value=6..*" \
|
|
"backtrace from factorial(5.1)"]
|
|
if { $result != 0 } { gdb_suppress_tests }
|
|
|
|
if [target_info exists gdb,noresults] { gdb_suppress_tests }
|
|
gdb_continue_to_end "recursive next test"
|
|
gdb_stop_suppressing_tests;
|
|
}
|
|
|
|
test_next_with_recursion
|
|
|
|
|
|
#********
|
|
|
|
# build a new file with optimization enabled so that we can try breakpoints
|
|
# on targets with optimized prologues
|
|
|
|
if { [prepare_for_testing break.exp "breako2" {break.c break1.c} {debug nowarnings optimize=-O2}] } {
|
|
return -1
|
|
}
|
|
|
|
#
|
|
# test break at function
|
|
#
|
|
gdb_test "break main" \
|
|
"Breakpoint.*at.* file .*, line.*" \
|
|
"breakpoint function, optimized file"
|
|
|
|
#
|
|
# test break at function
|
|
#
|
|
gdb_test "break marker4" \
|
|
"Breakpoint.*at.* file .*$srcfile1, line.*" \
|
|
"breakpoint small function, optimized file"
|
|
|
|
#
|
|
# run until the breakpoint at main is hit. For non-stubs-using targets.
|
|
#
|
|
gdb_run_cmd
|
|
gdb_expect {
|
|
-re "Breakpoint \[0-9\]+,.*main .*argc.*argv.* at .*$srcfile:$bp_location6.*$bp_location6\[\t \]+if .argc.* \{.*$gdb_prompt $" {
|
|
pass "run until function breakpoint, optimized file"
|
|
}
|
|
-re "Breakpoint \[0-9\]+,.*main .*argc.*argv.* at .*$gdb_prompt $" {
|
|
pass "run until function breakpoint, optimized file (code motion)"
|
|
}
|
|
-re "$gdb_prompt $" {
|
|
fail "run until function breakpoint, optimized file"
|
|
}
|
|
timeout {
|
|
fail "run until function breakpoint, optimized file (timeout)"
|
|
}
|
|
}
|
|
|
|
#
|
|
# run until the breakpoint at a small function
|
|
#
|
|
|
|
#
|
|
# Add a second pass pattern. The behavior differs here between stabs
|
|
# and dwarf for one-line functions. Stabs preserves two line symbols
|
|
# (one before the prologue and one after) with the same line number,
|
|
# but dwarf regards these as duplicates and discards one of them.
|
|
# Therefore the address after the prologue (where the breakpoint is)
|
|
# has no exactly matching line symbol, and GDB reports the breakpoint
|
|
# as if it were in the middle of a line rather than at the beginning.
|
|
|
|
set bp_location13 [gdb_get_line_number "set breakpoint 13 here" $srcfile1]
|
|
set bp_location14 [gdb_get_line_number "set breakpoint 14 here" $srcfile1]
|
|
send_gdb "continue\n"
|
|
gdb_expect {
|
|
-re "Breakpoint $decimal, marker4 \\(d=177601976\\) at .*$srcfile1:$bp_location13\[\r\n\]+$bp_location13\[\t \]+void marker4.*" {
|
|
pass "run until breakpoint set at small function, optimized file"
|
|
}
|
|
-re "Breakpoint $decimal, $hex in marker4 \\(d=177601976\\) at .*$srcfile1:$bp_location13\[\r\n\]+$bp_location13\[\t \]+void marker4.*" {
|
|
pass "run until breakpoint set at small function, optimized file"
|
|
}
|
|
-re "Breakpoint $decimal, marker4 \\(d=177601976\\) at .*$srcfile1:$bp_location14\[\r\n\]+$bp_location14\[\t \]+void marker4.*" {
|
|
# marker4() is defined at line 46 when compiled with -DPROTOTYPES
|
|
pass "run until breakpoint set at small function, optimized file (line bp_location14)"
|
|
}
|
|
-re "Breakpoint $decimal, factorial \\(.*\\) .*\{\r\n$gdb_prompt" {
|
|
# GCC 4.3 emits bad line number information - see gcc/36748.
|
|
if { [test_compiler_info "gcc-4-3-*"] } {
|
|
setup_xfail *-*-*
|
|
}
|
|
fail "run until breakpoint set at small function, optimized file"
|
|
}
|
|
-re ".*$gdb_prompt " {
|
|
fail "run until breakpoint set at small function, optimized file"
|
|
}
|
|
timeout {
|
|
fail "run until breakpoint set at small function, optimized file (timeout)"
|
|
}
|
|
}
|
|
|
|
clean_restart breako2
|
|
|
|
#
|
|
# test that 'rbreak' on a symbol that may be from a shared library doesn't
|
|
# cause a "Junk at end of arguments." error.
|
|
#
|
|
# On x86 GNU/Linux, this test will choke on e.g. __libc_start_main@plt.
|
|
#
|
|
# Note that this test won't necessarily choke on all targets even if
|
|
# all the rbreak issue is present. rbreak needs to match and set a
|
|
# breakpoint on a symbol causes 'break' to choke.
|
|
#
|
|
|
|
gdb_test "set breakpoint pending on" "" "rbreak junk pending setup"
|
|
|
|
# We expect at least one breakpoint to be set when we "rbreak main".
|
|
gdb_test "rbreak main" \
|
|
".*Breakpoint.*at.* file .*$srcfile, line.*" \
|
|
"rbreak junk set breakpoint"
|
|
|
|
# Run to a breakpoint. Fail if we see "Junk at end of arguments".
|
|
gdb_run_cmd
|
|
gdb_expect {
|
|
-re "Junk at end of arguments" {
|
|
fail "rbreak junk"
|
|
}
|
|
-re ".*Breakpoint \[0-9\]+,.*$gdb_prompt $" {
|
|
pass "rbreak junk"
|
|
}
|
|
timeout {
|
|
fail "rbreak junk (timeout)"
|
|
}
|
|
}
|
|
|
|
|
|
# Reset the default arguments for VxWorks
|
|
if [istarget "*-*-vxworks*"] {
|
|
set timeout 10
|
|
verbose "Timeout is now $timeout seconds" 2
|
|
send_gdb "set args main\n"
|
|
gdb_expect -re ".*$gdb_prompt $" {}
|
|
}
|