binutils-gdb/bfd/ChangeLog

561 lines
21 KiB
Plaintext

Fri Jun 7 12:35:46 1991 Sean Fagan (sef at cygint.cygnus.com)
* coffcode.h (coff_swap_aux_in): added else case to deal with
filenames less than 9 characters.
Thu Jun 6 18:27:38 1991 Steve Chamberlain (steve at cygint.cygnus.com)
* ../include/oasys.h oasys.c (oasys_archive_p): fixed so it works
* srec.c: now allows any number of sections to be created in a
file. Outputs addresses of the right length.
Thu May 30 15:30:10 1991 Steve Chamberlain (steve at cygint.cygnus.com)
* bfd.c (bfd_check_format): Fixed problem where when a defaulted
target didn't match, the format got set to the attempted match,
breaking a future test.
*../include/i386coff.h : fixed typo in type field with size
* i386coff.c icoff.c m88k-bcs.c ecoff.c ../include/bfd.h : Added
support in the jump table for the swapping routines exported to
gdb. Now gdb works with the 386.
Tue May 28 17:21:43 1991 John Gilmore (gnu at cygint.cygnus.com)
* Merge in changes from gdb-3.95 release.
Makefile.in: Allow hmake and tmake files to add OFILES.
aoutf1.h:
bfd.c: support specific targets as well as searching. When
searching, take default target in preference to others.
bfd.doc: typos
ieee.c, oasys.c: Avoid using the "tdata" macros left of assignment.
liba.out.h: Don't hard-code file offsets; use N_ macros for them.
libbfd.h: Support specific targets as well as searching.
opncls.c: Support specific targets as well as searching.
targets.c: Search is short-circuited if default target matches.
liboasys.c, libieee.c: Undo bothner changes that make macros
work to the left of assignment, but which depend on the
representations of different pointer types being the same.
Fri May 24 18:56:52 1991 Steve Chamberlain (steve at cygint.cygnus.com)
* i386coff.c: created.
* coffcode.h: added support for 386.
* Makefile.in: added support for 386.
* ../include/i386coff.h: created
Wed May 22 07:26:38 1991 Steve Chamberlain (steve at cygint.cygnus.com)
* coffcode.h: removed all put_x_<sizes>
* libbfd.c: Changed #ifdef __GNUC__ to #ifdef HOST_64_BIT, Added
DEFUNS
Tue May 21 08:58:58 1991 Steve Chamberlain (steve at cygint.cygnus.com)
(bothner)
* opncls.c: Changed obstack_chunk_alloc use xmalloc
Mon May 20 17:12:17 1991 Steve Chamberlain (steve at cygint.cygnus.com)
* everything: Removed sysdep.h from bfd.h and put back into files
from which it was split out. Now 64 bit version is built with a
-DHOST_64_BIT="long long" on the compile line.
Fri May 17 19:35:26 1991 Steve Chamberlain (steve at cygint.cygnus.com)
Changed all the [get|put][name] routines to use [get|put]_[size
in bytes].
Put in support for 64 bit work. Now two versions of bfd may be
generated, according to the state of TARGET_64_BIT, one which is
32 bit only, and one which is 64/32 bits.
Created new back end 'demo64' to test 64 bit functionality.
Renamed some files to work on DOS.
* archive.c: lint * bfd.c: prototypes and lint. * ecoff.c: added
64bit transfer * icoff.c: added 64bit transfer * ieee.c: name
chage, 64 bit transfer. * liba.out.h: Split out common code from
sunos and newsos into liba.out. Name changes and prototype mods. *
libbfd.c: lint and prototypes, extra 64bit swaps. * libbfd.h:
prototypes for new functions. * libcoff.h: lint * libieee.h: make
work on DOS * liboasys.h: make work on DOS * m88k-bcs.c: Name
change and 64bit stuff.* newsos3.c: common code removed, new jump
table. * oasys.c: Name change * opncls.c: Portability fixes *
srec.c: Name changes * sunos.c: Removed comon code. * targets.c:
Added demo * aout32, aout64.c include aoutx.h * bout.c: used to
be called b.out.c * coffcode.h: used to be called coff-code.h, now
64bit ized. * demo64.c: 64 bit a.out back end
Thu May 16 16:02:07 1991 Steve Chamberlain (steve at cygint.cygnus.com)
from bothner
* libieee.h: Make ieee_data and ieee_ar_data macros usable
on LHS of assignment, even when using old compilers.
* liboasys.h: Ditto for oasys_data and oasys_ar_data.
* m68kcoff.c: Add enum-to-int casts to accomodate old compilers.
* newsos3.c: Fix definitions of SEGMENT_SIZE and TEXT_START_ADDR.
* opncls.c: Define S_IXUSR, S_IXGRP, S_IXOTH if undefined.
* targets.c: Add declaration of newsos3_vec.
Mon May 13 10:03:29 1991 Steve Chamberlain (steve at cygint.cygnus.com)
* aout.c: fixxed some of the problems with filepos calculation.
(swap_ext_reloc): fixed problem with creation of relocs.
(aout_set_section_contents): fixed filepos problem
* coff-code.h: (swap_filehdr_in, swap_filehdr_out) add.
(swap_filehdr) delete. Changed all the usage of bfd_h_put_x.
(swap_aouthdr_in, swap_aouthdr_out) add. (swap_aouthdr) delete.
(coff_real_object_p) cleaned up, added MIPS. (coff_object_p)
cleaned up. (coff_write_object_contents) cleaned up.
* ecoff.c: Totally different. Now supports ecoff fully.
* icoff.c: fixed problems in relocation callout.
* libcoff.h: (struct icofdata) removed hdr structure from tdata.
* m68kcoff.c: updated target vector.
* sunos.c: (choose_reloc_size) added: (sunos4_callback) calls
choose_reloc_size. (sunos4_write_object_contents) now calls
choose_reloc_size so outputs relocs correctly, also calculates the
size of the sections correctly.
Fri May 10 16:58:53 1991 John Gilmore (gnu at cygint.cygnus.com)
Merge Per Bothner's changes to modularize BFD a.out a bit.
* libbfd.h, libbfd.c (bfd_generic_get_section_contents): Add.
* ieee.c: Cast enums to int before comparing them, for brain-
dead compilers.
* coff-code.h: Remove coff_get_section_contents, and use the
generic one instead.
* aout.c: Derive new module from sunos.c, containing generic
support code for all kinds of a.out files.
* sunos.c: Remove all code that goes in aout.c. Split out
machine dependent followup in sunos4_object_p into
sunos4_callback. Use JUMP_TABLE(aout) for the transver vector,
and redefine only the names we CHANGE, not all the names. Drop
the little-endian vector, and rename the vector as sunos4 rather
than generic.
* b.out.c: Use aout.c routines for most of the work. Slight
changes for the new regime. Remove close_and_cleanup and
get_section_contents in favor of generics. New transfer vector
regime.
* newsos.c: New support for Sony NEWS, another a.out format.
* ecoff.c: Remove close_and_cleanup. New tvec regime.
* icoff.c, m88k-bcs.c: Add write_contents to tvec.
* ieee.c, oasys.c: Remove close_and_cleanup, add write_contents
to tvec.
* opncls.c (bfd_close): Call format-dependent write_contents
routine, if writing, before calling target-dependent
close_and_cleanup routine (which is now always generic, I think).
* srec.c: Use bfd_alloc instead of malloc. Remove
close_and_cleanup and move code from it to
srec_write_object_contents. Add write_contents to tvec.
* targets.c: Remove a.out little vector, replace a.out big
vector with SunOS vector. FIXME: Need Vax support again now.
* libbfd.h: Add write_contents format-dependent-vector to the
bfd_target vector. Supply a generic close_and_cleanup routine.
* liba.out.h: Handle the new aout.c split. Add prototypes for
all routines defined in aout.c. Rename "sunos" things to "aout"
things. Add a few fields where needed for various formats.
* Makefile.in: Add aout.c and newsos.c.
* archive.c, ieee.c, oasys.c: Lint.
Fri May 10 12:34:48 1991 Steve Chamberlain (steve at cygint.cygnus.com)
* ../include/bfd.h
changed forward declaration struct stat; to reduce warnings. Changed
comment on bfd_h_<x>_x.
* ../include/m68kcoff.h, ../include/intel-coff.h,
../include/m88k-bcs.h
Now there are two incarnations of relocs, linenos and syments. One for
internal digestion, and one full of char arrays for I/O. The original
names have gone to detect errors.
* Makefile.in, m68kcoff.c, targets.c
Test new structure code with a 68k coff implementaion
* coff-code.h, icoff.c, coffswap.c, libcoff.h
Fixed all the places where there were problems with the size and
alignments of structures on disk and structures in memory. #ifed out
all the code in coffswap.c, since it should be done using the target
swap routines now.
Thu May 9 11:00:45 1991 Steve Chamberlain (steve at cygint.cygnus.com)
* ieee.c (do_one, ieee_slurp_section_data): now supports the load
multiple reloc command.
* sunos.c (sunos4_set_section_contents): Made it so that sections
are always padded to their alignment size.
Sat May 4 15:49:43 1991 John Gilmore (gnu at cygint.cygnus.com)
* archive.c, bfd.c, coff-code.h, opncls.c, sunos.c, trad-core.c:
Clean up types and such (saber C problems).
* ecoff.c: Clean up types and such. Remove routines that are
not used. Fix up reading and swapping of shorts from files.
Notes on bfd-0.5.2-patch1a, from Per Bothner:
* a.out.vax.c: Remove two bogus "static" from prototypes.
* ecoff.c: Got rid of lots of non-working junk (that had
been copied directly from coff-code.h).
Updated to be consistent with updates to icoff.c and coff-code.h.
* libbfd.h: Added definitions for S_IXUSR, S_IXGRP, and S_IXOTH
if they're missing (as they are in (BDS-4.3-based) NewsOS-3).
* sunos.c (n_txtoff): (Re-)Add support for sony. This is a kludge,
but until the target_vector is automatically generated,
it's as good as any. Note that the text offset is the only
difference between NewsOS and SunOs (including magic numbers).
(Most of the sunos_* routines should to renamed bsd_*
and move to a bsd.c file. Then (and when the target_vector
is automatically generated) it might make sense to create
a separate Sony target.)
* sysdep.h: Don't declare fread and fwrite. Causes trouble
on some systems, and doesn't help on others.
Similarly, only define X_OK if not already defined.
* trad-core.c: Don't include sys/stat.h - at least
on NewsOS 3, it has already been included.
Tue Mar 5 01:47:57 1991 John Gilmore (gnu at cygint.cygnus.com)
* coff-code.h (bfd_coff_swap_sym, bfd_coff_swap_aux,
bfd_coff_swap_lineno): Export the routines that byte-swap COFF
symbol tables if necessary when reading them in, so gdb can use
them. Add "bfd_coff_" to the names so they won't conflict with
names in calling programs. FIXME-soon: if coff-code.h is
included in two BFD modules, this will cause duplicate
definitions; the routines should be exported to a separate,
common, module (probably along with a mess of other ones).
Sat Mar 2 12:11:26 1991 John Gilmore (gnu at cygint.cygnus.com)
Improve modtime support.
* bfd.h: Add boolean mtime_set, and declare bfd_get_mtime.
Remove #define for bfd_get_mtime. Remove gratuitous comment.
* bfd.c (bfd_get_mtime): New fn, caches mtime, gets if not cached.
BUG: archive members still do not get correct mod times.
Improve floating point support for core files.
* sunos.c (struct core): Change void *fpa_dummy to double fp_stuff.
(sunos4_core_file_p): Create a second registers section in the
core file, called ".reg2", for the float registers.
Thu Feb 14 15:49:06 1991 Gumby Vinayak Wallace (gumby at cygint.cygnus.com)
* many changes to improve archive handling; found a logic flaw in
bfd_check_format which only just happened to work by cooncidence.
Thu Feb 14 07:53:16 1991 Steve Chamberlain (steve at cygint.cygnus.com)
* bfd.c (bfd_perform_relocation): fixed to use output_offsets
correctly.
* bfd.h: changed type of udata in asymbol to void *, like it
should be. Added bfd_reloc_dangerous enum member.
* coff-code.h: Fixed it so that internally generated symbols get
their values relocated correctly in all cases. Removed calls to
xmalloc.
* icoff.c: Not understanding the destination symbol of a reloc is
not a failure any more, just 'dangerous'. This allows linking of
b.out and coff images.
* sunos.c: Cleaned up the way that ZMAGIC section sizes are
calculated.
Tue Feb 12 13:25:46 1991 Steve Chamberlain (steve at cygint.cygnus.com)
* sunos.c (translate_to_native_sym_flags): fixed
sym_pointer->n_value so that symbols on the way out get their
section relative values calculated correctly.
* coff-code.h (mangle_symbols): fixed problem where tags were not
being relocated for structs, enums, unions. Also various lints.
Mon Feb 11 19:52:26 1991 Gumby Vinayak Wallace (gumby at cygint.cygnus.com)
* archive.c (get_elt_at_filepos): system_call_error returned
incorrectly.
Sun Feb 10 23:18:40 1991 Gumby Vinayak Wallace (gumby at cygint.cygnus.com)
* Resolve the use of no_error and system_call_error.
The bfd library itself now will never set bfd_error to
no_error.
The code still needs to be combed to make sure all the error
codes are correct. I suspect they are not always set correctly.
* The names of all the messages have _ prepended because the sun
bundled compiler can't distinguish from a macro which takes an
argument and the same identifier in a non-macro context.
* The reason for the above being that entry points which used to
be trampoline functions are now just macros which expand to a
direct call through the bfd's xfer vector.
* (../include/intel-coff.h) F_AR32WR: fix this constant. Why
must gas have its own version of everything (the gas version
had the correct value)
Tue Feb 5 11:46:53 1991 Steve Chamberlain (steve at cygint.cygnus.com)
* b.out.c: Added patches supplied by chrisb@mipon2.intel.com to
properly support i960 architecture and output correct reloc stuff.
* bfd.h: added prototype for bfd_printable_arch_mach, added
BFD_FAIL
* coff-code.h: Applied patches from chrisb to support i960
architecture, zero relocs and swap them correcly and conditionally
compiled the timestamp.
* sunos.c: Made the default section alignment 2^3 so that doubles
are done properly. Fixed the same reloc bug that was in b.out.c
* sysdep.h: Now compiles on a Posix box
Wed Jan 30 21:36:26 1991 John Gilmore (gnu at cygint.cygnus.com)
* icoff.c: Fix comment on big-endian version.
* coff-code.h: Make HAS_RELOC really work (it's backwards from
F_RELFLG). Set F_AR32WR in output files if little endian
architecture.
Tue Jan 29 20:56:10 PST 1991 steve@cygnus.com
* archures.c fixed =/== typo
* sunos.c added architecture stuff for output. Fixed
bug where files where vma(data) != size(text)
were processed wrong.
* coff-code.h added a lint cast
* (../include/a.out.sun4.h) fixed it so zmagic
worked
Mon Jan 28 19:15:29 PST 1991 steve@cygnus.com
* archive.c removed loads of includes, and fixed bug where string
table didn't have a null at the end.
* bfd.c fixed includes, added symbols argument to
canonicalize_reloc entry point.
* libbfd.c fixed includes and added some lint patches.
* targets.c added both sorts of intel coff.
* b.out.c fixed included, changed was the canonical
relocs were done.
* icoff.c added support for callj and big and little
enidian tables.
* opncls.c added chmod+xing for files with EXEC_P set.
* sunos.c fixed includes. Changed default section
alignement to words. Fixed relocation stuff to work with
new scheme
* bfd.h various new types added, prototype for new
reloc calls, changed bfd->iostream to a void *
to including files don't need stdio.h.
* libcoff.h added conversion table to tie relocs to
canonical symbols
* sysdep.h created
* coff-code.h fixed includes. Added code to support
big and little endian formats. Various lints. Better
processing of symbols. Changed reloc stuff to new
order
* libbfd.h fixed includes
Mon Jan 21 11:53:51 PST 1991 steve@cygnus.com
* bfd.h changed name of alignment entry in sec_struct to
alignment_power, because of conflicting uses within bfd.
Now it should be obvious that it's a 2**n alignment
specifier. Removed start_pad, end_alignment, block, minsize,
output_file_alignment, subsection_alignment and original_vma fields.
Added align_power() macro. Fixed bfd_section_alignment
acessor macros. Added bfd_symbol_same_target macro.
* b.out.c (b_out_write_object_contents) fixed to use
new alignment member. Fixed (callj_callback) to use section
relative symbols properly.
* sunos.c (sunos4_object_p) fixed to use new alignment_power.
Fixed (translate_from_native_sym_flags) to correctly make
symbols section relative.
* bfd.c (bfd_errmsg) fixed various enum cast problems.
(bfd_make_section) took out initialization of obsolete members.
(bfd_print_symbol_vandf) added
* opncls.c (bfd_create) created.
* coff-code.h (coff_new_section_hook) took away refs
to obsolete members. (make_a_section_from_file) added
conversion between alignment types. (coff_symbol_from)
added. (coff_count_linenumbers) only counts linenumbers
if symbol is of coff-type. (coff_mangle_symbols) only
heavily mangles symbols if symbol is coff-type.
(coff_write_symbols) various lints. (coff_write_object_contents)
various lints and modification for alignment conversion.
(coff_slurp_relocs) fixed for use with new asection shape.
Sat Jan 19 16:10:42 PST 1991 steve@cygnus.com
* archive.c lots of lint
* b.out.c added callj relocation support, upgrated reloc howto.
Fixed so that asymbol and reloc records are output
correctly.
* bfd.c lots of lint, support for new bfd entry point
bfd_print_symbol.
* bfd.h changed definition of asymbol to contain pointer to
owning bfd, removed target dependencies.
* cache.c took out print statements, put in BFD_ASSERT calls.
* coff-code.h various lints, corrected linenumber output
functionality. Added support for new style asymbols and
bfd_print_symbol. Fixed so that asymbol and
reloc records are handled correctly. Added timestamp.
* icoff.c Added support for new howto shape.
* liba.out.h Added support for new asymbol shape
* libbfd.c various lints
* libbfd.h various lints
* libcoff.h added support for new asymbol shape.
* sunos.c various lints. Added support for new asymbol shape
and bfd_print_symbol.
Wed Jan 16 21:38:09 PST 1991 steve@cygnus.com
* b.out.c removed prototype of sunos4_ennativate_symtab, lots of
pointer lint. Added support for callj relocation. Fixed bug where
the last 32 bytes of the text section were overwritten by data. Fixed bug
where archives of b.out didn't work due bfd_slurp_extended_name_table
returning false.
* sunos.c added support for n_other field. Braced the howto table so
that it won't be affected by any lengthing of the howto struct typedef.
Various lints
* bfd.h added support for n_other field, added special_function
reloc type, modified bfd_perform_relocation prototype. Added bfd_h_get_x
macros.
* bfd.c upgraded bfd_perform_relocation, various lints.
Wed Jan 16 01:55:53 1991 John Gilmore (gnu at rtl)
* ChangeLog: Started ChangeLog for BFD.
* ToDo: Create file for suggestions.
* Makefile: Support easy loading into Saber C.
Add dependencies for icoff.o and bcs88kcoff.o.
Rename coff.c to coff-code.h. Change callers.
* bfd.c (bfd_check_format): Allow the check_format routines
to return the desired target vector, rather than just a Boolean.
bfd.h (bfd_check_format): Change function pointer return type.
archive.c (bfd_generic_archive_p): change callee.
b.out.c (b_out_little_object_p, b_out_big_object_p,
b_out_real_object_p): change callee.
libbfd.c (_bfd_dummy_target): Dummy routine replacing bfd_false
in check_format transfer vectors that need a filler.
libbfd.h (bfd_generic_archive_p, _bfd_dummy_target): Fix decls.
bcs88kcoff.c: change callee.
coff-code.h (coff_real_object_p, coff_big_object_p): change callee.
icoff.c: change callee.
sunos.c (sunos4_object_p, sunos4_core_file_p): change callee.
* libbfd.c (zalloc): It should actually zero the storage!
This was commented out for some reason.
* libbfd.h: Add malloc, xmalloc, memcpy, and fatal decls.
This is so callers can avoid <stdlib.h> which doesn't exist
on older systems.
* bfd.c (map_over_sections): Add debugging code, since I
noticed the section count for sunos core files was bad, but only
GDB had detected the problem.
(bfd_set_section_lineno_size, bfd_set_section_linenos,
bfd_get_section_linenos): Remove obsolete functions.
(bfd_apply_relocations): Use longs, not ints, for the math.
* bfd.h: Declare enum boolean and struct bfd_target as well
as typedefs for them. Remove obsolete
bfd_get_section_lineno_size.
* cache.c: Make the "fdopen" support work. Keep better track
of how many files are open. Centralize the opening of files
and be sure bfd_open[rw] actually try to open the file. Evade
linked list initialization problems.
* b.out.c, coff-code.h, opncls.c, sunos.c: lint.
* coff-code.h (coff_slurp_symbol_table): Null-terminate symtab names.
* cplus-dem.c: Delete file, since it is not part of BFD.
* opncls.c (bfd_openr): Eliminate misplaced #if 0 code.
(bfd_openr, bfd_openw): Actually open the file, give error now.
* sunos.c (sunos4_core_file_p): Set section count.
(sunos4_set_section_linenos, stab_names, fprint_name): Eliminiate
obsolete definitions.
(_write_symbol_table): Initialize <idx> counter.
(foop): Eliminate debugging code.