binutils-gdb/gas/ChangeLog-2015

2044 lines
68 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

2015-12-24 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/tc-arm.c (arm_ext_v6t2_v8m): New feature for instructions
shared between ARMv6T2 and ARMv8-M.
(move_or_literal_pool): Check mov.w/mvn and movw availability against
arm_ext_v6t2 and arm_ext_v6t2_v8m respectively instead of checking
arm_arch_t2.
(do_t_branch): Error out for wide conditional branch instructions if
targetting ARMv8-M Baseline.
(non_v6t2_wide_only_insn): Add the logic for new wide-only instructions
in ARMv8-M Baseline.
(wide_insn_ok): New function.
(md_assemble): Use wide_insn_ok instead of non_v6t2_wide_only_insn and
adapt error message for unsupported wide instruction to ARMv8-M
Baseline.
(insns): Reorganize instructions shared by ARMv8-M Baseline and
ARMv6t2 architecture.
(arm_cpus): Set feature bit ARM_EXT2_V6T2_V8M for marvell-pj4 and
marvell-whitney cores.
(arm_archs): Define armv8-m.base architecture.
(cpu_arch_ver): Define ARM_ARCH_V8M_BASE architecture version.
(aeabi_set_public_attributes): Add logic to set Tag_CPU_arch to 17 for
ARMv8-M Mainline. Set Tag_DIV_use for ARMv8-M Baseline as well.
2015-12-24 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/tc-arm.c (arm_ext_m): Include ARMv8-M.
(arm_ext_v8m): New feature for ARMv8-M.
(arm_ext_atomics): New feature for ARMv8 atomics.
(do_tt): New encoding function for TT* instructions.
(insns): Add new entries for ARMv8-M specific instructions and
reorganize the ones shared by ARMv8-M Mainline and ARMv8-A.
(arm_archs): Define armv8-m.main architecture.
(cpu_arch_ver): Define ARM_ARCH_V8M_MAIN architecture version and
clarify the ordering rule.
(aeabi_set_public_attributes): Use TAG_CPU_ARCH_* macro to refer to
Tag_CPU_arch values for ARMv7e-M detection. Add logic to keep setting
Tag_CPU_arch to ARMv8-A for -march=all. Also set Tag_CPU_arch_profile
to 'A' if extension bit for atomic instructions is set, unless it is
ARMv8-M. Set Tag_THUMB_ISA_use to 3 for ARMv8-M. Set Tag_DIV_use to 0
for ARMv8-M Mainline.
2015-12-24 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/tc-arm.c (move_or_literal_pool): Check mov.w, mvm and movw
availability against arm_ext_v6t2 instead of checking arm_arch_t2,
fixing comments along the way.
(handle_it_state): Check arm_ext_v6t2 instead of arm_arch_t2 to
generate IT instruction.
(t1_isa_t32_only_insn): New function.
(md_assemble): Use above new function to check for invalid wide
instruction for CPU Thumb ISA and to determine what Thumb extension
bit is necessary for that instruction.
(md_apply_fix): Use arm_ext_v6t2 instead of arm_arch_t2 to decide if
branch is out of range.
2015-12-21 Nick Clifton <nickc@redhat.com>
PR gas/19386
* doc/as.texinfo (Strings): Prepend a space to index entries that
start with a backslash. This works around a problem in the pdf
generator.
2015-12-18 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (optimize_imm): Store 32-bit immediate in
64-bit only for 64-bit BFD.
(optimize_disp): Optimize 64-bit displacement to 32-bit only
for 64-bit BFD.
2015-12-17 Ramana Radhakrishnan <ramana.radhakrishnan@arm.com>
* config/tc-arm.c (aeabi_set_public_attributes): Adjust
TAG_ARCH_profile for armv8-a.
2015-12-16 Mickael Guene <mickael.guene@st.com>
* doc/c-arm.texi: Add documentation about new directives
* config/tc-arm.c (group_reloc_table): Add mapping between gas
syntax and new relocations.
(do_t_add_sub): Keep new relocations for add operand.
(do_t_mov_cmp): Keep new relocations for mov operand.
(insns): Use 'shifter operand with possible group relocation'
operand parse code for movs operand.
(md_apply_fix): Implement mov and add encoding when new
relocations on them.
(tc_gen_reloc): Add new relocations.
(arm_fix_adjustable): Since offset has a limited range ([0:255])
we disable adjust_reloc_syms() for new relocations.
2015-12-15 Nick Clifton <nickc@redhat.com>
* doc/c-msp430.texi (MSP430 Options): Remove references to a
non-existant silicon errata.
* config/tc-msp430.c: Likewise.
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (parse_neon_type_for_operand): Adjust to
take into account new vector type 2H.
(vectype_to_qualifier): Likewise.
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (vectype_to_qualifier): Calculate operand
qualifier from per-type base and offet.
2015-12-14 Yoshinori Sato <ysato@users.sourceforge.jp>
* config/rx-defs.h(rx_cpu_type): Add RXV2 type.
* config/tc-rx.c(cpu_type_list): New type lookup table.
(md_parse_option): Use lookup table for choose cpu.
(md_show_usage): Add rxv2 for mcpu option.
* doc/c-rx.texi: Likewise.
* config/rx-parse.y: Add v2 instructions and ACC register.
(rx_check_v2): check v2 type.
2015-12-14 Jan Beulich <jbeulich@suse.com>
* dw2gencfi.c (dot_cfi_label): Free "name".
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (aarch64_hint_opt_hsh): New.
(parse_barrier_psb): New.
(parse_operands): Add case for AARCH64_OPND_BARRIER_PSB.
(md_begin): Set up aarch64_hint_opt_hsh.
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (aarch64_features): Add "profile".
* doc/c-aarch64.texi (AArch64 Extensions): Add "profile".
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (parse_sys_ins_reg): Add check of
architectural support for system register.
2015-12-10 Jose E. Marchesi <jose.marchesi@oracle.com>
* doc/c-sparc.texi (Sparc-Regs): Document the %dN and %qN notation
for floating-point registers.
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* doc/c-aarch64.texi (AArch64 Extensions): Update entry for crc.
2015-12-10 Andrew Burgess <andrew.burgess@embecosm.com>
* config/tc-arc.c (md_parse_option): Return 1 in order to accept
dummy arguments.
2015-12-09 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-sparc.c (sparc_ip): Support %dN and %qN notation for
double and quad-precision floating-point registers.
2015-12-09 Nick Clifton <nickc@redhat.com>
* config/tc-rx.c (rx_relax_frag): Fix compile time warning.
2015-12-08 Jan Beulich <jbeulich@suse.com>
* read.c (in_bss): New.
(do_align): Use it to also warn for non-zero fill in .bss.
(do_org): Likewise.
(s_space): Likewise.
(s_fill): Error on bad use in .bss/.struct.
(float_cons): Likewise.
(emit_leb128_expr): Likewise.
(emit_expr_with_reloc): Defer handling use inside .struct. Also
error on non-zero item added to .bss.
(stringer_append_char): Error on non-zero character.
2015-12-08 Jan Beulich <jbeulich@suse.com>
* read.c (stringer): Move absolute section check up. Return
right away.
2015-12-08 Jan Beulich <jbeulich@suse.com>
* config/obj-elf.c (elf_file_symbol): Tighten condition for
moving BSF_FILE symbols.
2015-12-08 DJ Delorie <dj@redhat.com>
* config/rl78-parse.y: Make all branches relaxable via
rl78_linkrelax_branch().
* config/tc-rl78.c (rl78_linkrelax_branch): Mark all relaxable
branches with relocs.
(options): Add OPTION_NORELAX.
(md_longopts): Add -mnorelax.
(md_parse_option): Support OPTION_NORELAX.
(op_type_T): Add bh, sk, call, and br.
(rl78_opcode_type): Likewise.
(rl78_relax_frag): Fix not-relaxing logic. Add sk.
(md_convert_frag): Fix relocation handling.
(tc_gen_reloc): Strip relax relocs when not linker relaxing.
(md_apply_fix): Defer overflow handling for anything that needs a
PLT, to the linker.
* config/tc-rl78.h (TC_FORCE_RELOCATION): Force all relocations to
the linker when linker relaxing.
* doc/c-rl78.texi (norelax): Add.
2015-12-07 Alan Modra <amodra@gmail.com>
* config/tc-ppc.c (md_apply_fix): Localize variables. Reduce casts.
2015-12-04 Nick Clifton <nickc@redhat.com>
PR gas/19276
* config/tc-arm.h (SUB_SEGMENT_ALIGN): Do not define for COFF/PE
targets.
2015-12-04 Claudiu Zissulescu <claziss@synopsys.com>
* config/tc-arc.c (arc_option): Sets all internal gas options when
parsing .cpu directive.
(declare_register_set): Declare all 64 registers.
(md_section_align): Refactor.
(md_pcrel_from_section): Remove assert.
(pseudo_operand_match): Fix pseudo operand match.
(find_reloc): Use flags filed, extend matching.
* config/tc-arc.h (TC_VALIDATE_FIX): Don't fixup any PLT
relocation.
2015-12-01 Alan Modra <amodra@gmail.com>
* config/aout_gnu.h: Invoke aout N_* macros with pointer to
struct internal_exec.
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (aarch64_features): Add "fp16".
* doc/c-aarch64.texi (Architecture Extensions): Add "fp16".
2015-11-24 Christophe Monat <christophe.monat@st.com>
* config/tc-arm.c (move_or_literal_pool): Do not transform ldr
ri,=imm into movs when ri is a high register in T1.
2015-11-20 Nick Clifton <nickc@redhat.com>
* po/fr.po: Updated French translation.
* po/uk.po: Updated Ukraninan translation.
* po/zh_CN.po: New simplified Chinese translation.
* configure.ac (ALL_LINGUAS): Add zh_CN.
* configure: Regenerate.
2015-11-19 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-arm.c (arm_archs): Add "armv8.2-a".
* doc/c-arm.texi (-march): Add "armv8.2-a".
2015-11-19 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (aarch64_archs): Add "armv8.2-a".
* doc/c-aarch64.texi (-march): Likewise.
2015-11-19 Alan Modra <amodra@gmail.com>
* read.c (output_big_leb128): Describe "sign" parameter.
2015-11-19 Alan Modra <amodra@gmail.com>
* config/tc-ppc.h (SUB_SEGMENT_ALIGN): Define only for ELF.
2015-11-16 Mike Frysinger <vapier@gentoo.org>
* config/tc-microblaze.c (parse_imm): Add an offsetT cast.
2015-11-13 Tristan Gingold <gingold@adacore.com>
* configure: Regenerate.
2015-11-13 Tristan Gingold <gingold@adacore.com>
* NEWS: Add marker for 2.26.
2015-11-12 James Greenhalgh <james.greenhalgh@arm.com>
* config/tc-aarch64.c (aarch64_cpus): Add cortex-a35.
* doc/c-aarch64.texi (-mcpu=): Likewise.
2015-11-12 James Greenhalgh <james.greenhalgh@arm.com>
* config/tc-arm.c (arm_cpus): Likewise.
* doc/c-arm.texi (-mcpu=): Likewise.
2015-11-12 Matthew Wahab <matthew.wahab@arm.com>
PR gas/19217
* config/tc-arm.c (move_or_literal_pool): Remove redundant feature
check. Fix some code formatting. Drop use of MOVT. Add some
comments.
2015-11-11 Alan Modra <amodra@gmail.com>
Peter Bergner <bergner@vnet.ibm.com>
* doc/as.texinfo (Target PowerPC): Document -mpower9 and -mpwr9.
* doc/c-ppc.texi (PowerPC-Opts): Likewise.
* config/tc-ppc.c (md_show_usage): Likewise.
(md_assemble): Handle BFD_RELOC_PPC_REL16DX_HA.
(md_apply_fix): Likewise.
(ppc_handle_align): Handle power9's group ending nop.
2015-11-09 Jim Wilson <jim.wilson@linaro.org>
* config/tc-aarch64.c (aarch64_cpus): Add qdf24xx.
* config/tc-arm.c (arm_cpus): Likewise.
* doc/c-arm.texi, doc/c-aarch64.texi: Likewise.
2015-11-09 Dominik Vogt <vogt@linux.vnet.ibm.com>
* read.c (parse_bitfield_cons): Fix left shift of negative value.
* config/tc-xstormy16.c (md_section_align): Likewise.
* config/tc-xgate.c (md_section_align): Likewise.
* config/tc-visium.c (md_section_align): Likewise.
* config/tc-v850.c (md_section_align): Likewise.
* config/tc-tic6x.c (md_section_align): Likewise.
* config/tc-sh.c (SH64PCREL32_M, SH64PCREL48_M, SH64PCREL32_M)
(MOVI_32_M, MOVI_48_M, MOVI_32_M, md_section_align): Likewise.
* config/tc-sh64.c (shmedia_md_estimate_size_before_relax): Likewise.
* config/tc-score.c (s3_section_align): Likewise.
* config/tc-score7.c (s7_section_align): Likewise.
* config/tc-s390.c (md_section_align): Likewise.
* config/tc-rx.c (md_section_align): Likewise.
* config/tc-rl78.c (md_section_align): Likewise.
* config/tc-ppc.c (md_section_align): Likewise.
* config/tc-or1k.c (md_section_align): Likewise.
* config/tc-nds32.c (md_section_align): Likewise.
* config/tc-mt.c (md_section_align): Likewise.
* config/tc-msp430.c (md_section_align): Likewise.
* config/tc-mn10300.c (md_section_align): Likewise.
* config/tc-mn10200.c (md_section_align): Likewise.
* config/tc-mips.c (md_section_align): Likewise.
* config/tc-microblaze.c (parse_imm): Likewise.
* config/tc-mep.c (md_section_align): Likewise.
* config/tc-m68k.c (md_section_align): Likewise.
* config/tc-m68hc11.c (md_section_align): Likewise.
* config/tc-m32r.c (md_section_align): Likewise.
* config/tc-m32c.c (md_section_align): Likewise.
* config/tc-lm32.c (md_section_align): Likewise.
* config/tc-iq2000.c (md_section_align): Likewise.
* config/tc-ip2k.c (md_section_align): Likewise.
* config/tc-ia64.c (dot_save, dot_vframe): Likewise.
* config/tc-i960.c (md_number_to_field, md_section_align): Likewise.
* config/tc-i386.c (md_section_align): Likewise.
* config/tc-i370.c (md_section_align): Likewise.
* config/tc-frv.c (md_section_align): Likewise.
* config/tc-fr30.c (md_section_align): Likewise.
* config/tc-epiphany.c (md_section_align): Likewise.
* config/tc-d30v.c (md_section_align): Likewise.
* config/tc-d10v.c (md_section_align): Likewise.
* config/tc-cr16.c (l_cons): Likewise.
* config/tc-bfin.c (md_section_align): Likewise.
* config/tc-arm.c (md_section_align): Likewise.
* config/tc-arc.c (md_section_align): Likewise.
* config/bfin-parse.y (expr_1): Likewise.
2015-11-02 Nick Clifton <nickc@redhat.com>
* config/rx-parse.y: Allow zero value for 5-bit displacements.
2015-11-02 Nick Clifton <nickc@redhat.com>
* config/tc-rx.c (parse_rx_section): Align parameter provides a
multiple of n argument, not a power of n argument.
2015-10-29 Nick Clifton <nickc@redhat.com>
* config/tc-aarch64.c (elf64_aarch64_target_format): Select the
cloudabi format if the TARGET_OS is cloudabi.
2015-10-29 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/tc-arm.c (insns): Guard cps by arm_ext_v6_notm instead of
arm_ext_v6_dsp.
2015-10-28 Claudiu Zissulescu <claziss@synopsys.com>
* config/tc-arc.c (tokenize_arguments): Avoid creating unused
symbols when parsing relocation types.
(md_apply_fix): Handle TLS relocations. Fix BFD_RELOC_ARC_32_PCREL
relocation.
(arc_check_reloc): Emit BFD_RELOC_ARC_32_PCREL relocation.
2015-10-27 Jim Wilson <jim.wilson@linaro.org>
* config/tc-arm.c (selected_cpu_name): Increase length of array to
accomodate "Samsung Exynos M1".
(arm_parse_cpu): Add assertion and length check to prevent
overfilling selected_cpu_name.
2015-10-22 Nick Clifton <nickc@redhat.com>
* config/tc-msp430.c (PUSH_1X_WORKAROUND): Delete.
(OPTION_SILICON_ERRATA): Define.
(OPTION_SILICON_WARN): Define.
(md_parse_opton): Handle silicon errata options.
(md_longopts): Add silicon errata options.
(ms_show_usage): Report silicon errata options.
(msp430_srcoperand): Handle silicon errata.
(msp430_operands): Likewise. Improve nop insertion.
(msp430_fix_adjustable): Update warning generation.
* doc/c-msp430.texi: Document silicon errata options.
2015-10-22 H.J. Lu <hongjiu.lu@intel.com>
* configure.ac: Properly check
--enable-compressed-debug-sections={yes,all}.
* configure: Regenerated.
2015-10-22 H.J. Lu <hongjiu.lu@intel.com>
PR gas/19109
* configure.ac: Handle --enable-compressed-debug-sections=*,gas,*.
* configure: Regenerated.
2015-10-22 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (tc_i386_fix_adjustable): Handle
BFD_RELOC_X86_64_GOTPCRELX and BFD_RELOC_X86_64_REX_GOTPCRELX.
(tc_gen_reloc): Likewise.
(i386_validate_fix): Generate BFD_RELOC_X86_64_GOTPCRELX or
BFD_RELOC_X86_64_REX_GOTPCRELX if fx_tcbit2 is set.
* config/tc-i386.h (TC_FORCE_RELOCATION_LOCAL): Also return
true for BFD_RELOC_X86_64_GOTPCRELX and
BFD_RELOC_X86_64_REX_GOTPCRELX.
2015-10-22 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (tc_i386_fix_adjustable): Handle
BFD_RELOC_386_GOT32X.
(tc_gen_reloc): Likewise.
(match_template): Force 0x8b encoding for "mov foo@GOT, %eax".
(output_disp): Check for "call/jmp *mem", "mov mem, %reg",
"test %reg, mem" and "binop mem, %reg" where binop is one of
adc, add, and, cmp, or, sbb, sub, xor instructions. Set
fx_tcbit if the REX prefix is generated. Set fx_tcbit2 if
BFD_RELOC_386_GOT32X should be generated.
(i386_validate_fix): Generate BFD_RELOC_386_GOT32X if fx_tcbit2
is set.
2015-10-21 Nick Clifton <nickc@redhat.com>
PR gas/19109
* configure.ac: Restore --enable-compressed-debug-sections, with
options of all, none or gas.
Do not enable compressed debug sections by default for x86 Linux
targets.
* configure: Regenerate.
2015-10-20 H.J. Lu <hongjiu.lu@intel.com>
PR gas/19109
* NEWS: Update --enable-compressed-debug-sections=.
* configure.ac: Remove --enable-compressed-debug-sections.
(DEFAULT_FLAG_COMPRESS_DEBUG): Check
--enable-compressed-debug-sections={all,gas} instead of
--enable-compressed-debug-sections. For x86 Linux targets,
default to compressing debug sections.
* configure: Regenerated.
2015-10-19 Nick Clifton <nickc@redhat.com>
PR gas/19109
* configure.ac: Add option --enable-compressed-debug-sections.
This sets the default behaviour for compressing debug sections.
* as.c (flag_compress_debug): Define and initialise to
COMPRESS_DEBUG_GABI_ZLIB if DEFAULT_COMPRESS_DEBUG is set.
(show_usage): Indicate whether --no-compress-debug-sections
or --compress-debug-sections is the default.
* config/tc-i386.c (flag_compress_debug): Delete definition.
* doc/as.texinfo (--nocompress-debug-sectionas): Update
description.
* NEWS: Announce the new feature.
* config.in: Regenerate.
* configure: Regenerate.
2015-10-12 Nick Clifton <nickc@redhat.com>
* config/tc-msp430.c (msp430_mcu_names): Rename to
msp430_mcu_data. Add fields for the ISA and hardware multiply
support. Update with information from the latest devices.csv
file.
(md_parse_option): Make use of the new array.
2015-10-12 Andrew Burgess <andrew.burgess@embecosm.com>
* config/tc-avr.c (avr_output_property_record): Fix overwrite bug
for align and fill records.
(avr_handle_align): Record fill information for align frags.
(create_record_for_frag): Add next frag assertion, use correct
address for align records.
2015-10-10 Alan Modra <amodra@gmail.com>
PR gas/19113
* read.c (next_char_of_string): Mask char after escape. Use
CHAR_MASK rather than 0xff.
2015-10-07 Yao Qi <yao.qi@linaro.org>
* config/tc-aarch64.c (md_begin): Access field 'name' rather
than 'template'.
2015-10-07 Claudiu Zissulescu <claziss@synopsys.com>
* config/tc-arc.c: Revamped file for ARC support.
* config/tc-arc.h: Likewise.
* doc/as.texinfo: Add new ARC options.
* doc/c-arc.texi: Likewise.
2015-10-02 Renlin Li <renlin.li@arm.com>
* config/tc-aarch64.c (s_tlsdescadd): New.
(s_tlsdescldr): New.
(md_pseudo_table): Handle tlsdescadd and tlsdescldr pseudo ops.
(reloc_table): Add entries for BFD_RELOC_AARCH64_TLSDESC_OFF_G0_NC and
BFD_RELOC_AARCH64_TLSDESC_OFF_G0_NC.
(process_movw_reloc_info): Support AARCH64_TLSDESC_OFF_G1 and
AARCH64_TLSDESC_OFF_G0_NC.
(md_apply_fix): Likewise.
(aarch64_force_relocation): Likewise.
2015-10-02 Renlin Li <renlin.li@arm.com>
* config/tc-aarch64.c (reloc_table): Add two entries for
gottprel_g0_nc and gottprel_g1.
(process_movw_reloc_info): Add support.
(md_apply_fix): Likewise.
(aarch64_force_relocation): Likewise.
2015-10-02 Renlin Li <renlin.li@arm.com>
* config/tc-aarch64.c (reloc_table): New relocation modifier tlsgd_g0_nc.
(process_movw_reloc_info): Support BFD_RELOC_AARCH64_TLSGD_MOVW_G1.
(md_apply_fix): Likewise.
(aarch64_force_relocation): Likewise.
2015-10-02 Renlin Li <renlin.li@arm.com>
* config/tc-aarch64.c (reloc_table): New relocation modifier tlsgd_g1.
(process_movw_reloc_info): Support BFD_RELOC_AARCH64_TLSGD_MOVW_G1.
(md_apply_fix): Likewise.
(aarch64_force_relocation): Likewise.
2015-10-02 Renlin Li <renlin.li@arm.com>
* config/tc-aarch64.c (reloc_table): New relocation modifier
gotoff_g0_nc.
(process_movw_reloc_info): Support gotoff_g0_nc.
(md_apply_fix): Likewise.
2015-10-02 Renlin Li <renlin.li@arm.com>
* config/tc-aarch64.c (reloc_table): New relocation modifier
gotoff_g1.
(process_movw_reloc_info): Support newly added modifier.
(md_apply_fix): Likewise.
2015-09-29 Dominik Vogt <vogt@linux.vnet.ibm.com>
* doc/c-s390.texi: Add documentation.
Add missing code markup.
* config/tc-s390.c (current_flags): New static variable.
(s390_parse_cpu): Parse cpu flags a la "+nohtm" etc.
(s390_setup_opcodes): Use cpu flags to determine the set of opcodes.
Fix indentation.
(md_parse_option): Call s390_parse_cpu with the new signature.
(s390_machine): Likewise.
Keep track of current_flags.
Simplify code a bit.
undefine MAX_HISTORY at end of function.
(s390_machinemode): undefine MAX_HISTORY at end of function.
Update an error message.
2015-08-11 Peter Zotov <whitequark@whitequark.org>
PR ld/18759
* config/tc-or1k.c (tc_gen_reloc): Correct computation of PC
relative relocs.
* config/tc-or1k.h (GAS_CGEN_PRCEL_R_TYPE): Delete.
2015-09-25 Ryo ONODERA <ryo_on@yk.rim.or.jp>
PR 18994
* configure.ac (nds32): Don't use bash == in tests.
* configure: Regenerate.
2015-09-23 Nick Clifton <nickc@redhat.com>
* config/tc-ppc.c (insn_validate): Cast PPC_OPSHIFT_INV to an int.
2015-09-22 Nick Clifton <nickc@redhat.com>
* config/tc-rx.c (nop_7): Recode using MAX.
2015-09-05 Chen Gang <gang.chen.5i5j@gmail.com>
* config/tc-avr.c (md_section_align): Append UL for -1 to avoid
the latest gcc's warning.
2015-08-27 Alan Modra <amodra@gmail.com>
PR gas/18581
* config/tc-aarch64.h (TC_START_LABEL): Redefine.
* config/tc-arm.c (tc_start_label_without_colon): Delete params.
Use input_line_pointer directly.
* config/tc-arm.h (TC_START_LABEL): Redefine.
(TC_START_LABEL_WITHOUT_COLON): Redefine.
(tc_start_label_without_colon): Update prototype.
* config/tc-bfin.c (bfin_start_label): Delete ptr param. Check
for NUL instead.
* config/tc-bfin.h (bfin_start_label): Update prototype.
(TC_START_LABEL): Redefine.
* config/tc-d30v.h (TC_START_LABEL): Redefine.
* config/tc-fr30.c (restore_colon): Rewrite.
(fr30_is_colon_insn): Add nul_char param. Return int. Bump
i_l_p over quote. Update restore_colon calls.
* config/tc-fr30.h (TC_START_LABEL): Redefine.
(fr30_is_colon_insn): Update prototype.
* config/tc-m32c.c (restore_colon, m32c_is_colon_insn): As above.
* config/tc-m32c.h (TC_START_LABEL): Redefine.
(m32c_is_colon_insn): Update prototype.
* config/tc-m32r.h (TC_START_LABEL): Redefine.
* config/tc-mep.h (TC_START_LABEL): Redefine.
* config/tc-nds32.h (TC_START_LABEL): Redefine.
* config/tc-tic54x.c (tic54x_start_label): Replace params with
nul_char and next_char. Step over trailing quote.
* config/tc-tic54x.h (TC_START_LABEL_WITHOUT_COLON): Redefine.
(tic54x_start_label): Update prototype.
* read.c (TC_START_LABEL): Redefine. Update invocation.
(TC_START_LABEL_WITHOUT_COLON): Update invocation.
* config/tc-nios2.c (s_nios2_set): Save initial input_line_pointer
and restore if calling s_set. Don't restore delim again.
2015-08-26 Alan Modra <amodra@gmail.com>
PR gas/18581
* config/tc-mn10200.c (md_assemble <mdr>): Move restore_line_pointer
call to where input line used to be restored.
* config/tc-mn10300.c (md_assemble <usp>): Remove redundant input
line restore.
* config/tc-tilepro.c (parse_reg_expression): Add regname var.
2015-08-26 Nick Clifton <nickc@redhat.com>
PR gas/18842
* configure.ac (AS_CHECK_DECLS): Add asprintf.
* configure: Regenerate.
* config.in: Regenerate.
2015-08-25 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-sparc.c (priv_reg_table): New privileged register
%pmcdper.
2015-08-21 Nick Clifton <nickc@redhat.com>
PR gas/18581
* expr.c (get_symbol_end): Rename to get_symbol_name. Add a
return parameter pointing to the start of the symbol. Allow
symbol names enclosed in double quotes.
(restore_line_pointer): New function. Replace the NUL character
inserted into the input stream with the given character. If the
character was a double quote, advance the input pointer.
* expr.h (get_symbol_end): Delete.
(get_symbol_name): Add prototype.
(restore_line_pointer): Prototype.
* read.h (SKIP_WHITESPACE_AFTER_NAME): New macro.
* doc/as.texinfo (Symbol Intro): Document that symbol names can
now be enclosed in double quotes.
* cond.c (s_ifdef): Replace get_symbol_end with get_symbol_name.
Use restore_line_pointer to replace the NUL in the input stream.
Use SKIP_WHITESPACE_AFTER_NAME to skip past the end of a symbol.
Check for the use of double quoted symbol names.
* expr.c: Likewise.
* config/obj-aout.c: Likewise.
* config/obj-coff-seh.c: Likewise.
* config/obj-coff.c: Likewise.
* config/obj-elf.c: Likewise.
* config/obj-evax.c: Likewise.
* config/obj-macho.c: Likewise.
* config/obj-som.c: Likewise.
* config/tc-alpha.c: Likewise.
* config/tc-arc.c: Likewise.
* config/tc-arm.c: Likewise.
* config/tc-dlx.c: Likewise.
* config/tc-h8300.c: Likewise.
* config/tc-hppa.c: Likewise.
* config/tc-i370.c: Likewise.
* config/tc-i386-intel.c: Likewise.
* config/tc-i386.c: Likewise.
* config/tc-i960.c: Likewise.
* config/tc-ia64.c: Likewise.
* config/tc-iq2000.c: Likewise.
* config/tc-m32r.c: Likewise.
* config/tc-m68hc11.c: Likewise.
* config/tc-m68k.c: Likewise.
* config/tc-microblaze.c: Likewise.
* config/tc-mips.c: Likewise.
* config/tc-mmix.c: Likewise.
* config/tc-mn10200.c: Likewise.
* config/tc-mn10300.c: Likewise.
* config/tc-nios2.c: Likewise.
* config/tc-ppc.c: Likewise.
* config/tc-s390.c: Likewise.
* config/tc-score.c: Likewise.
* config/tc-score7.c: Likewise.
* config/tc-sparc.c: Likewise.
* config/tc-tic4x.c: Likewise.
* config/tc-tic54x.c: Likewise.
* config/tc-tic6x.c: Likewise.
* config/tc-tilegx.c: Likewise.
* config/tc-tilepro.c: Likewise.
* config/tc-v850.c: Likewise.
* config/tc-xtensa.c: Likewise.
* config/tc-z80.c: Likewise.
* dw2gencfi.c: Likewise.
* dwarf2dbgc.: Likewise.
* ecoff.c: Likewise.
* read.c: Likewise.
* stabs.c: Likewise.
2015-08-19 Jiong Wang <jiong.wang@arm.com>
* config/tc-aarch64.c (reloc_table): New relocation types support for
dtprel_lo12.
(ldst_lo12_determine_real_reloc_type): Support
BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12,
BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12,
BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12,
BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12,
BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12_NC.
(parse_operands): Likewise.
(md_apply_fix): Likewise.
(aarch64_force_relocation): Likewise.
(process_movw_reloc_info): Likewise.
2015-08-19 Jiong Wang <jiong.wang@arm.com>
* config/tc-aarch64.c (reloc_table): New relocation modifiers,
"dtprel_hi12", "dtprel_g0", "dtprel_g0_nc", "dtprel_g1",
"dtprel_g1_nc", "dtprel_g2".
(md_apply_fix): Support new relocation types.
(aarch64_force_relocation): Likewise.
(process_movw_reloc_info): Likewise.
2015-08-19 Jiong Wang <jiong.wang@arm.com>
* config/tc-aarch64.c (reloc_table): New relocation modifiers.
(md_apply_fix): Support BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12_NC.
(aarch64_force_relocation): Likewise.
2015-08-17 Alan Modra <amodra@gmail.com>
* config/tc-arm.c (s_align): Delete.
(md_pseudo_table): Use s_align_ptwo for "align".
* config/tc-arm.h (TC_ALIGN_ZERO_IS_DEFAULT): Define.
* read.c (s_align): Modify for TC_ALIGN_ZERO_IS_DEFAULT.
2015-08-13 Alan Modra <amodra@gmail.com>
* expr.c (operand): Rewrite handling of operands starting with "0f".
If atof_generic only parses "-" or "+", treat as expression.
2015-08-13 Alan Modra <amodra@gmail.com>
DJ Delorie <dj@redhat.com>
* expr.c (integer_constant): Return O_absent expression if eol.
(operand): For targets with both LOCAL_LABELS_FB and
NUMBERS_WITH_SUFFIX set, treat "0b" not followed by binary
digits as a local label reference. Correct handling of 0b prefix.
If a suffix is not allowed, error on 0B.
2015-08-13 Alan Modra <amodra@gmail.com>
* doc/as.texinfo (Local Labels): Allowed range of N in local
labels is non-negative integers, not positive integers.
2015-08-12 David Weatherford <weath@cadence.com>
* config/tc-xtensa.c (struct litpool_frag, struct litpool_seg):
New structures.
(xtensa_maybe_create_literal_pool_frag): New function.
(litpool_seg_list, auto_litpools, auto_litpool_limit)
(litpool_buf, litpool_slotbuf): New static variables.
(option_auto_litpools, option_no_auto_litpools)
(option_auto_litpool_limit): New enum identifiers.
(md_longopts): Add entries for auto-litpools, no-auto-litpools
and auto-litpool-limit.
(md_parse_option): Handle option_auto_litpools,
option_no_auto_litpools and option_auto_litpool_limit.
(md_show_usage): Add help for --[no-]auto-litpools and
--auto-litpool-limit.
(xtensa_mark_literal_pool_location): Record a place for literal
pool with a call to xtensa_maybe_create_literal_pool_frag.
(get_literal_pool_location): Find highest priority literal pool
or convert candidate to literal pool when auto-litpools are used.
(xg_assemble_vliw_tokens): Create literal pool after jump
instruction.
(xtensa_check_frag_count): Create candidate literal pool every
auto_litpool_limit frags.
(xtensa_relax_frag): Add jump around literals to non-empty
literal pool.
(xtensa_move_literals): Estimate literal pool addresses and move
unreachable literals closer to their users, converting candidate
to literal pool if needed.
(xtensa_switch_to_non_abs_literal_fragment): Only emit error
about missing .literal_position in case auto-litpools are not
used.
* config/tc-xtensa.h (xtensa_relax_statesE): New relaxation
state: RELAX_LITERAL_POOL_CANDIDATE_BEGIN.
* doc/as.texinfo (Xtensa options): Document --auto-litpools and
--no-auto-litpools options.
* doc/c-xtensa.texi (Xtensa options): Likewise.
2015-08-12 Simon Dardis <simon.dardis@imgtec.com>
* config/tc-mips.c (move_register): Change to use 'or' only.
(s_cpload, s_cpsetup, s_cprestore, s_cpreturn): Update to
use or for move.
2015-08-11 Jiong Wang <jiong.wang@arm.com>
* config/tc-aarch64.c (reloc_table): New relocation modifiers
"dtprel_lo12".
(md_apply_fix): Support BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12.
(aarch64_force_relocation): Likewise.
2015-08-11 Jiong Wang <jiong.wang@arm.com>
* config/tc-aarch64.c (reloc_table): New relocation modifiers.
(md_apply_fix): Support BFD_RELOC_AARCH64_TLSLD_ADD_LO12_NC.
(aarch64_force_relocation): Likewise.
2015-08-11 Jiong Wang <jiong.wang@arm.com>
* config/tc-aarch64.c (reloc_table): New relocation modifiers.
(md_apply_fix): Support BFD_RELOC_AARCH64_TLSLD_ADR_PAGE21.
(aarch64_force_relocation): Likewise.
2015-08-11 Nick Clifton <nickc@redhat.com>
PR gas/18765
* config/tc-arm.c (move_or_literal_pool): Use U suffix to remove
compile time warnings about constant expressions being shifted
into bit 31.
(do_iwmmxt_wldstd): Likewise.
(do_iwmmxt_wrwrwr_or_imm5): Likewise.
(md_assemble): Likewise.
PR gas/18574
* config/tc-msp430.c (msp430_operands): Rewrite if statements to
remove redundant checks.
(md_apply_fix): Likewise.
PR gas/18677
* config/tc-mmix.c (md_assemble): Fix typo checking operands with
a numeric constant value.
PR gas/18678
* config/tc-tic4x.c (tic4x_insn_check): Fix typo.
PR gas/18679
* config/xtensa-relax.c (same_operand_name): Fix typo.
2015-08-08 Hans-Peter Nilsson <hp@axis.com>
* tc-arm.c (double_to_single, is_double_a_single): Append ULL to
0xFFFFFFFFFFFFF to avoid errors on 32-bit hosts.
2015-08-04 Thomas Preud'homme <thomas.preudhomme@arm.com>
* doc/c-aarch64.texi (.xword): Document directive.
2015-08-03 Nick Clifton <nickc@redhat.com>
* doc/as.texinfo (Overview): Add --hash-size to the synopsis and
fix typo in its entry: @kindex -> @item.
2015-07-28 Robert Suchanek <robert.suchanek@imgtec.com>
* config/tc-mips.c (mips_cpu_info_table): Add m5100 and m5101 entries.
* doc/c-mips.texi: Document m5100 and m5101 for -march=.
2015-07-28 Robert Suchanek <robert.suchanek@imgtec.com>
* config/tc-mips.c (mips_cpu_info_table): Add interaptiv entry.
* doc/c-mips.text: Document -march=interaptiv.
2015-07-27 H.J. Lu <hongjiu.lu@intel.com>
* configure: Regenerated.
2015-07-24 Nick Clifton <nickc@redhat.com>
* config/tc-rl78.c (rl78_abs_sym): New local variable.
(md_begin): Initialise the new symbol.
(OPIMM): Define the value to be relative to the new symbol and not
the absolute section symbol.
2015-07-22 Alan Modra <amodra@gmail.com>
PR gas/18687
* input-scrub.c (input_scrub_next_buffer): Rearrange and simplify
loop. Don't drop lines at end of file lacking a newline, add a
newline instead. Ensure partial_size is zero whenever
partial_where is NULL. Adjust buffer size for extra char.
(input_scrub_push, input_scrub_begin): Adjust buffer size here too.
2015-07-20 Matthew Wahab <matthew.wahab@arm.com>
* NEWS: Mention corrected spelling of armv6kz.
* config/tc-arm.c (arm_cpus): Replace ARM_ARCH_V6ZK with
ARM_ARCH_V6KZ.
(arm_archs): Likewise. Also add "armv6kz" and "armv6kzt2".
* doc/c-arm.texi: Replace "armv6zk" with "armv6kz".
2015-07-16 Jiong Wang <jiong.wang@arm.com>
* config/tc-aarch64.c (reloc_table): New relocation modifiers.
(md_apply_fix): Support BFD_RELOC_AARCH64_TLSLD_ADR_PREL21.
(aarch64_force_relocation): Ditto.
2015-07-16 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-arm.c (arm_fpus): Add crypto-neon-fp-armv8.1.
* doc/c-arm.texi (-mfpu=): Likewise. Correct the entry for
neon-fp-armv8.1.
2015-07-16 James Greenhalgh <james.greenhalgh@arm.com>
* config/tc-arm.c (md_assemble): Rephrase the "selected processor does
not support ARM mode" error messages.
2015-07-15 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (flag_compress_debug): Replace
COMPRESS_DEBUG_GNU_ZLIB with COMPRESS_DEBUG_GABI_ZLIB.
2015-07-14 H.J. Lu <hongjiu.lu@intel.com>
* as.c (parse_args): Make --compress-debug-sections and
--compress-debug-sections=zlib the same as
--compress-debug-sections=zlib-gabi.
* doc/as.texinfo: Change --compress-debug-sections and
--compress-debug-sections=zlib to zlib-gabi.
2015-07-09 Catherine Moore <clm@codesourcery.com>
* config/tc-mips.c (check_fpabi): Handle
VAL_GNU_MIPS_ABI_FP_NAN2008.
2015-07-08 Ciro Santilli <ciro.santilli@gmail.com>
* doc/as.texinfo: Clarify case requirements for pseudo ops.
2015-07-08 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
* config/tc-avr.c (tc_gen_reloc): Change 32 bit relocation to
32 bit PC relative and update offset if the fixup is pc-relative.
* config/tc-avr.h (DIFF_EXPR_OK): Define to enable PC relative diff
relocs.
2015-07-03 Alan Modra <amodra@gmail.com>
* config/tc-ppc.c (md_show_usage): Add -m821, -m850, -m860.
* doc/c-ppc.texi (PowerPC-Opts): Likewise.
2015-07-01 Sandra Loosemore <sandra@codesourcery.com>
Cesar Philippidis <cesar@codesourcery.com>
* config/tc-nios2.c (nios2_min_align): New.
(nop): Replace with....
(nop_r1, nop_r2, nop_r2_cdx, nop32, nop16): New.
(nios2_align): Handle alignment on 2-byte boundaries when CDX
instructions may be present.
(s_nios2_align): Adjust reference to nop.
(CDXBRANCH, IS_CDXBRANCH): New.
(CDX_UBRANCH_SUBTYPE, CDX_CBRANCH_SUBTYPE): New.
(nios2_relax_subtype_size): Handle 2-byte CDX branches.
(nios2_relax_frag): Likewise.
(md_convert_frag): Handle R2 encodings.
(nios2_check_overflow): Check that low-order bits are zero
before applying rightshift from howto.
(nios2_check_overflow): Correct negative overflow calculation.
(nios2_diagnose_overflow): Handle signed_immed12_overflow. Issue
generic overflow messages for miscellaneous instruction formats.
(md_apply_fix): Recognize new R2 relocations. For pc_relative
relocations, store fixup in *valP.
(nios2_reglist_mask, nios2_reglist_dir): New.
(nios2_parse_reglist): New.
(nios2_parse_base_register): New.
(nios2_assemble_expression): Handle constant expressions designated
by BFD_RELOC_NONE.
(nios2_assemble_reg3): New.
(nios2_assemble_arg_c): Handle R2 instruction formats.
(nios2_assemble_arg_d): Likewise.
(nios2_assemble_arg_s): Likewise.
(nios2_assemble_arg_t): Likewise.
(nios2_assemble_arg_D): New.
(nios2_assemble_arg_S): New.
(nios2_assemble_arg_T): New.
(nios2_assemble_arg_i): Handle R2 instruction formats.
(nios2_assemble_arg_I): New.
(nios2_assemble_arg_u): Handle R2 instruction formats.
(nios2_assemble_arg_U): New.
(nios2_assemble_arg_V): New.
(nios2_assemble_arg_W): New.
(nios2_assemble_arg_X): New.
(nios2_assemble_arg_Y): New.
(nios2_assemble_arg_o): Handle R2 instruction formats.
(nios2_assemble_arg_O): New.
(nios2_assemble_arg_P): New.
(nios2_assemble_arg_j): Handle R2 instruction formats.
(nios2_assemble_arg_k): New.
(nios2_assemble_arg_l): Handle R2 instruction formats.
(nios2_assemble_arg_m): Likewise.
(nios2_assemble_arg_M): New.
(nios2_assemble_arg_N): New.
(nios2_assemble_arg_e): New.
(nios2_assemble_arg_f): New.
(nios2_assemble_arg_g): New.
(nios2_assemble_arg_h): New.
(nios2_assemble_arg_R): New.
(nios2_assemble_arg_B): New.
(nios2_assemble_args): Handle new argument letters.
(nios2_consume_arg): Likewise.
(nios2_translate_pseudo_insn): Avoid dereferencing null pointer
in error message.
(nios2_ps_insn_info_structs): Add nop.n.
(output_ubranch): Handle CDX branches.
(output_cbranch): Likewise.
(output_call): Handle R2 encodings.
(output_movia): Likewise.
(md_begin): Initialize nios2_min_align.
(md_assemble): Align to nios2_min_align. Adjust nios2_min_align
if a 16-bit instruction is seen.
(nios2_cons_align): Use appropriate nop pattern.
2015-07-01 Sandra Loosemore <sandra@codesourcery.com>
Cesar Philippidis <cesar@codesourcery.com>
* config/tc-nios2.c: Adjust includes.
(OPTION_MARCH): Define.
(md_longopts): Add -march option.
(nios2_architecture): New.
(nios2_use_arch): New.
(md_parse_option): Handle OPTION_MARCH.
(md_show_usage): Document -march.
(md_begin): Set arch in BFD.
(nios2_elf_final_processing): New.
* config/tc-nios2.h (elf_tc_final_processing): Define.
(nios2_elf_final_processing): New.
* doc/c-nios2.texi (-march): Add documentation.
2015-06-30 Amit Pawar <Amit.Pawar@amd.com>
* config/tc-i386.c (cpu_arch): Add .mwaitx.
(process_immext): Check operands for monitorx/mwaitx instructions.
* doc/c-i386.texi: Document mwaitx.
2015-06-28 H.J. Lu <hongjiu.lu@intel.com>
* as.c (parse_args): Replace COMPRESS_DEBUG_ZLIB with
COMPRESS_DEBUG_GNU_ZLIB.
* config/tc-i386.c (flag_compress_debug): Likewise.
2015-06-24 H.J. Lu <hongjiu.lu@intel.com>
* doc/as.texinfo (.cfi_lsda): Remove the extra @section.
2015-06-19 Peter Bergner <bergner@vnet.ibm.com>
* config/tc-ppc.c (md_assemble): Use ppc_optional_operand_value.
Allow for optional operands without insert functions.
2015-06-18 Nick Clifton <nickc@redhat.com>
PR gas/18541
* config/tc-arm.c (md_apply_fix): Add support for ADR in thumb
mode against a nearby symbol.
2015-06-18 Nick Clifton <nickc@redhat.com>
PR gas/18481
* config/tc-arm.c (tc_gen_reloc): Include BFD_RELOC_ARM_TLS_LE32
in the same case as BFD_RELOC_ARM_TLS_IS32.
2015-06-17 Nick Clifton <nickc@redhat.com>
* config/tc-arm.c (is_double_a_single): Make conditional upon the
availablity of a 64-bit type. Use this type for the argument and
mantissa.
(double_to_single): Likewise.
* config/tc-arm.c (move_or_literal_pool): Use a 64-bit type for
the constant value, if available. Generate a 64-bit value from a
bignum if supported. Only perform the second optimization for
PR 18500 if the 64-bit type is available.
2015-06-17 Alessandro Marzocchi <alessandro.marzocchi@gmail.com>
PR gas/18500
* config/tc-arm.c (is_double_a_single): New function.
(double_to_single): New function.
(move_or_literal_pool): Add support for converting VLDR to VMOV.
PR gas/18499
* config/tc-arm.c (move_or_literal_pool): Add support for LDR Rx,=
to MOV.w or MVN.w for Thumb2.
2015-06-17 Nicolas Pitre <nico@linaro.org>
* as.c (show_usage): Document --sectname-subst.
(parse_args): Add --sectname-subst.
* as.h (flag_sectname_subst): New.
* config/obj-elf.c (obj_elf_section_name): Add %S substitution.
* doc/as.texinfo: Document it.
2015-06-15 Renlin Li <renlin.li@arm.com>
* config/tc-aarch64.c (reloc_table): New relocation modifier.
(md_apply_fix): Support BFD_RELOC_AARCH64_LD64_GOTOFF_LO15.
(aarch64_force_relocation): Ditto
2015-06-13 Mark Wielaard <mjw@redhat.com>
* dwarf2dbg.c (out_header): Document EXPR->X_add_number value,
out_debug_aranges depends on it.
(out_debug_aranges): Track size of header to properly pad header
for address alignment.
2015-06-11 John David Anglin <danglin@gcc.gnu.org>
PR gas/18427
* config/tc-hppa.c (last_label_symbol): Declare.
(pa_get_label): Return last label in current space/segment or NULL.
(pa_define_label): Record last label and add to root.
(pa_undefine_label): Remove last label from root.
2015-06-08 Nick Clifton <nickc@redhat.com>
* config/tc-rx.c (rx_op): Correct handling of integer bignums.
2015-06-04 Matthew Wahab <matthew.wahab@arm.com>
* NEWS: Mention ARMv8.1 support in the Aarch64 port.
* config/tc-aarch64.c (aarch64_arch_option_table): Add "armv8.1-a".
* doc/c-aarch64.texi (-march): Add "armv8.1-a".
2015-06-04 Renlin Li <renlin.li@arm.com>
* config/tc-arm.c (arm_init_frag): Use frag's thumb_mode information
when available.
2015-06-04 Nick Clifton <nickc@redhat.com>
* config/tc-h8300.c (md_section_align): Fix compile time warning
about left shifting a negative value.
2015-06-03 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-arm.c (arm_archs): Add "armv8.1-a".
* doc/c-arm.texi (ARM Options, -march): Add "armv8.1-a".
* NEWS: Mention ARMv8.1 support.
2015-06-02 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-arm.c (arm_ext_pan): New.
(do_setpan): New, encode an ARM SETPAN instruction.
(do_t_setpan): New, encode a Thumb SETPAN instruction.
(insns): Add "setpan".
(arm_extensions): Add "pan".
* doc/c-arm.texi (ARM Options): Add "pan" to list of -mcpu processor
extensions.
2015-06-02 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (aarch64_features): Add "rdma".
* doc/c-aarch64.texi (AArch64 Extensions): Add "rdma".
2015-06-02 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (aarch64_features): Add "lor".
* doc/c-aarch64.c (Aarch64 Extensions): Add "lor" to list of
architecture extensions.
2015-06-01 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (parse_sys_reg): New parameter. Check target
support. Fix whitespace.
(parse_operands): Update for parse_sys_reg changes.
(aarch64_features): Add "pan".
* doc/c-aarch64.texi (Aarch64 Extensions): Add "pan".
2015-06-01 Jiong Wang <jiong.wang@arm.com>
* config/tc-aarch64.c (reloc_table): New relocation modifiers.
(md_apply_fix): Support BFD_RELOC_AARCH64_LD32_GOTPAGE_LO14.
(aarch64_force_relocation): Ditto.
2015-06-01 Jiong Wang <jiong.wang@arm.com>
* config/tc-aarch64.c (reloc_table): New relocation modifiers.
(md_apply_fix): Support BFD_RELOC_AARCH64_LD64_GOTPAGE_LO15.
(aarch64_force_relocation): Ditto.
2015-05-28 Catherine Moore <clm@codesourcery.com>
Bernd Schmidt <bernds@codesourcery.com>
Paul Brook <paul@codesourcery.com>
* config/tc-alpha.c (all_cfi_sections): Declare.
(s_alpha_ent): Initialize all_cfi_sections.
(alpha_elf_md_end): Invoke cfi_set_sections.
* config/tc-mips.c (md_apply_fix): Handle BFD_RELOC_NONE.
(s_ehword): Use BFD_RELOC_32_PCREL.
(mips_fix_adjustable): Handle BFD_RELOC_32_PCREL.
(mips_cfi_reloc_for_encoding): New function.
* tc-mips.h (DWARF2_FDE_RELOC_SIZE): Redefine.
(DWARF2_FDE_RELOC_ENCODING): Define.
(tc_cfi_reloc_for_encoding): Define.
(mips_cfi_reloc_for_encoding): Define.
(tc_compact_eh_opcode_stop): Define.
(tc_compact_eh_opcode_pad): Define.
* doc/as.texinfo: Document Compact EH extensions.
* doc/internals.texi: Likewise.
* dw2gencfi.c (EH_FRAME_LINKONCE): Redefine.
(tc_cfi_reloc_for_encoding): Provide default.
(compact_eh): Declare.
(emit_expr_encoded): New function.
(get_debugseg_name): Add Compact EH support.
(alloc_debugseg_item): Likewise.
(cfi_set_sections): New function.
(dot_cfi_fde_data): New function.
(dot_cfi_personality_id): New function.
(dot_cfi_inline_lsda): New function.
(cfi_pseudo_table): Add cfi_fde_data, cfi_personality_id,
and cfi_inline_lsda.
(dot_cfi_personality): Add Compact EH support.
(dot_cfi_lsda): Likewise.
(dot_cfi_sections): Likewise.
(dot_cfi_startproc): Likewise.
(get_cfi_seg): Likewise.
(output_compact_unwind_data): New function.
(output_cfi_insn): Add Compact EH support.
(output_cie): Likewise.
(output_fde): Likewise.
(cfi_finish): Likewise.
(cfi_emit_eh_header): New function.
(output_eh_header): New function.
* dw2gencfi.h (cfi_set_sections): Declare.
(SUPPORT_COMPACT_EH): Define.
(MULTIPLE_FRAME_SECTIONS): Define.
New enumeration to describe the Compact EH header format.
(fde_entry): Add new fields personality_id, eh_header_type, eh_data_size,
eh_data, eh_loc and sections.
(CFI_EMIT_eh_frame, CFI_EMIT_debug_frame, CFI_EMIT_target,
CFI_EMIT_eh_frame_compact): Define.
2015-05-26 Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (xtensa_move_literals): Check that
search_frag is non-NULL. Report error if literal frag is not
found.
2015-05-22 Nick Clifton <nickc@redhat.com>
PR gas/18446
* read.c (output_big_sleb128): Use U suffix to prevent compile
time warning.
2015-05-19 Jiong Wang <jiong.wang@arm.com>
* config/tc-aarch64.c (process_movw_reloc_info): Sort relocation case
labels alphabetically.
(md_apply_fix): Ditto.
(aarch64_force_relocation): Ditto.
2015-05-15 H.J. Lu <hongjiu.lu@intel.com>
PR binutis/18386
* config/tc-i386.c (OPTION_MAMD64): New.
(OPTION_MINTEL64): Likewise.
(md_longopts): Add -mamd64 and -mintel64.
(md_parse_option): Handle OPTION_MAMD64 and OPTION_MINTEL64.
(md_show_usage): Add -mamd64 and -mintel64.
* doc/c-i386.texi: Document -mamd64 and -mintel64.
2015-05-15 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (shared): New.
(OPTION_MSHARED): Likewise.
(elf_symbol_resolved_in_segment_p): Add relocation argument.
Check PLT relocations and shared.
(md_estimate_size_before_relax): Pass fragP->fr_var to
elf_symbol_resolved_in_segment_p.
(md_longopts): Add -mshared.
(md_show_usage): Likewise.
(md_parse_option): Handle OPTION_MSHARED.
* doc/c-i386.texi: Document -mshared.
2015-05-14 H.J. Lu <hongjiu.lu@intel.com>
* write.c (compress_debug): Don't write the zlib header, which
is handled by bfd_update_compression_header.
2015-05-13 Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (xtensa_relax_frag): Allow trampoline to be
closer than J_RANGE / 2 to jump frag.
2015-05-11 H.J. Lu <hongjiu.lu@intel.com>
* configure.tgt (arch): Set to iamcu for i386-*-elfiamcu target.
* config/tc-i386.c (i386_mach): Support iamcu.
(i386_target_format): Likewise.
2015-05-11 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (cpu_arch): Add iamcu.
(i386_align_code): Handle PROCESSOR_IAMCU.
(i386_arch): Likewise.
(i386_mach): Likewise.
(i386_target_format): Likewise.
(valid_iamcu_cpu_flags): New function.
(check_cpu_arch_compatible): Only allow Intel MCU instructions
when targeting Intel MCU.
(set_cpu_arch): Call valid_iamcu_cpu_flags to check if CPU flags
are valid for Intel MCU.
(md_parse_option): Likewise.
* tc-i386.h (ELF_TARGET_IAMCU_FORMAT): New.
(processor_type): Add PROCESSOR_IAMCU.
* doc/c-i386.texi: Document iamcu.
2015-05-08 Nick Clifton <nickc@redhat.com>
PR gas/18347
* config/tc-arm.h (TC_EQUAL_IN_INSN): Define.
* config/tc-arm.c (arm_tc_equal_in_insn): New function. Move
the symbol name checking code to here from...
(md_undefined_symbo): ... here.
2015-05-07 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (elf_symbol_resolved_in_segment_p): New.
(md_estimate_size_before_relax): Use it.
2015-05-06 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-sparc.c: Typo in comment fixed.
2015-05-06 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-sparc.c (sparc_ip): Support the %ncc "natural"
condition codes
* doc/c-sparc.texi (Sparc-Regs): Document %ncc.
2015-05-06 Nick Clifton <nickc@redhat.com>
* doc/as.texinfo (Dollar Local Labels): Note that these are only
supported on some targets.
2015-05-06 Renlin Li <renlin.li@arm.com>
* config/tc-aarch64.c (mapping_state): Recording alignment before exit.
2015-05-05 Renlin Li <renlin.li@arm.com>
* config/tc-aarch64.c (aarch64_init_frag): Always generate mapping
symbols.
2015-05-05 Nick Clifton <nickc@redhat.com>
* config/tc-msp430.c (MAX_OP_LEN): Increase to 4096.
(msp430_make_init_symbols): New function.
(msp430_section): Call it.
(msp430_frob_section): Likewise.
2015-05-02 Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (cached_fixupS, fixup_cacheS): New typedefs.
(struct cached_fixup, struct fixup_cache): New structures.
(fixup_order, xtensa_make_cached_fixup),
(xtensa_realloc_fixup_cache, xtensa_cache_relaxable_fixups),
(xtensa_find_first_cached_fixup, xtensa_delete_cached_fixup),
(xtensa_add_cached_fixup): New functions.
(xtensa_relax_frag): Cache fixups pointing at potentially
oversized jumps at the beginning of every relaxation pass. Only
check subset of this cache in the reach of single jump from the
trampoline frag currently being relaxed.
2015-05-01 Nick Clifton <nickc@redhat.com>
* config/rl78-parse.y (MULU): Remove ISA_G14.
(MULH, DIVHU, DIVWU, MACHI, MACH): Update error strings.
2015-05-01 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (i386_elf_emit_arch_note): Removed.
* config/tc-i386.h (md_end): Likewise.
(i386_elf_emit_arch_note): Likewise.
2015-05-01 H.J. Lu <hongjiu.lu@intel.com>
* configure.tgt: Support i386-*-elf*.
2015-04-30 DJ Delorie <dj@redhat.com>
* config/rl78-defs.h (rl78_isa_g10): New.
(rl78_isa_g13): New.
(rl78_isa_g14): New.
* config/rl78-parse.y (ISA_G10): New.
(ISA_G13): New.
(ISA_G14): New.
(MULHU, MULH, MULU, DIVHU, DIVWU, MACHU, MACH): Use them.
* config/tc-rl78.c (rl78_isa_g10): New.
(rl78_isa_g13): New.
(rl78_isa_g14): New.
2015-04-30 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (i386_target_format): Use "else if" on
cpu_arch_isa.
2015-04-30 Nick Clifton <nickc@redhat.com>
PR gas/18347
* config/tc-arm.c (md_undefined_symbol): Issue a warning message
(if enabled) when the user creates a symbol with the same name as
an ARM instruction.
(flag_warn_syms): New static variable.
(arm_opts): Add mwarn-syms and mno-warn-syms.
* doc/c-arm.texi (ARM Options): Document the -m[no-]warn-syms
options.
PR gas/18353
* doc/as.texinfo (Zero): Add documentation of the .zero pseudo-op.
2015-04-29 Nick Clifton <nickc@redhat.com>
PR 18256
* config/tc-arm.c (encode_arm_cp_address): Issue an error message
if the operand is neither a register nor a vector.
2015-04-29 Nick Clifton <nickc@redhat.com>
* doc/as.texinfo (Set): Note that a symbol cannot be set multiple
times if the expression is not constant and the target uses linker
relaxation.
2015-04-28 Renlin Li <renlin.li@arm.com>
* config/tc-arm.c (arm_init_frag): Always emit mapping symbols.
2015-04-28 Nick Clifton <nickc@redhat.com>
PR 18313
* cond.c (s_if): Stop compile time warning about stopc being used
before it is set.
(s_ifc): Likewise.
2015-04-27 Renlin Li <renlin.li@arm.com>
* config/tc-aarch64.c (s_aarch64_inst): Don't align code for non-text
section.
(md_assemble): Likewise, move the align code outside the loop.
2015-04-24 Jim Wilson <jim.wilson@linaro.org>
* config/tc-aarch64.c (aarch64_cpus): Add CRC and CRYPTO features
for thunderx.
2015-04-24 Richard Earnshaw <rearnsha@arm.com>
* config/tc-arm.h (arm_min): New function.
(SUB_SEGMENT_ALIGN): Define.
2015-04-23 Matthew Fortune <matthew.fortune@imgtec.com>
* config/tc-mips.c (macro): State the recommended way of creating
32-bit or 64-bit addresses.
2015-04-23 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (match_mem_size): Also allow no size
specification when broadcasting.
2015-04-20 H.J. Lu <hongjiu.lu@intel.com>
* doc/as.texinfo (Bundle directives): Shorten menu entry and
use @subsection.
(CFI directives): Use @subsection.
(SH-Dependent, SH64-Dependent): Moved after SCORE-Dependent.
* doc/c-i386.texi (i386-Mnemonics): Use @subsection.
2015-04-17 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
* config/tc-avr.c (create_record_for_frag): Rename link to
prop_rec_link.
2015-04-15 H.J. Lu <hongjiu.lu@intel.com>
* NEWS: Mention
--compress-debug-sections=[none|zlib|zlib-gnu|zlib-gabi].
2015-04-14 H.J. Lu <hongjiu.lu@intel.com>
* as.h (compressed_debug_section_type): Removed.
2015-04-14 Nick Clifton <nickc@redhat.com>
* config/tc-rl78.h (TC_LINKRELAX_FIXUP): Define.
(TC_FORCE_RELOCATION_SUB_SAME): Define.
(DWARF2_USE_FIXED_ADVANCE_PC): Define.
2015-04-10 Nick Clifton <nickc@redhat.com>
PR binutils/18198
* doc/c-arm.texi (ARM Options): Add a note about the interaction of
the -EB option with the linker's --be8 option.
2015-04-09 Hans-Peter Nilsson <hp@axis.com>
* doc/c-rx.texi: Fix markup typos in last change.
2015-04-09 Nick Clifton <nickc@redhat.com>
* config/tc-rx.c (enum options): Add OPTION_DISALLOW_STRING_INSNS.
(md_longopts): Add -mno-allow-string-insns.
(md_parse_option): Handle -mno-allow-string-insns.
(md_show_usage): Mention -mno-allow-string-insns.
(rx_note_string_insn_use): New function. Produces an error
message if a string insn is used when it is not allowed.
* config/rx-parse.y (SCMPU): Call rx_note_string_insn_use.
(SMOVU, SMOVB, SMOVF, SUNTIL, SWHILE, RMPA): Likewise.
* config/rx-defs.h (rx_note_string_insn_use): Prototype.
* doc/c-rx.texi: Document -mno-allow-string-insns.
2015-04-08 H.J. Lu <hongjiu.lu@intel.com>
* as.c (show_usage): Update --compress-debug-sections.
(std_longopts): Use optional_argument on compress-debug-sections.
(parse_args): Handle
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
* as.h (compressed_debug_section_type): New.
(flag_compress_debug): Change type to compressed_debug_section_type.
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
* write.c (compress_debug): Set BFD_COMPRESS_GABI for
--compress-debug-sections=zlib-gabi. Call
bfd_get_compression_header_size to get compression header size.
Don't rename section name for --compress-debug-sections=zlib-gabi.
* config/tc-i386.c (compressed_debug_section_type): Set to
COMPRESS_DEBUG_ZLIB.
* doc/as.texinfo: Document
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
2015-04-07 Renlin Li <renlin.li@arm.com>
* config/tc-aarch64.c (mapping_state): Use subseg_text_p.
(s_aarch64_inst): Likewise.
(md_assemble): Likewise.
2015-04-06 H.J. Lu <hongjiu.lu@intel.com>
* write.c (compress_debug): Use bfd_putb64 to write uncompressed
section size.
2015-04-05 H.J. Lu <hongjiu.lu@intel.com>
* write.c (compress_debug): Don't write the zlib header if
compressed section size is the same as before compression.
2015-04-02 Nick Clifton <nickc@redhat.com>
PR gas/18189
* config/tc-microblaze.c (parse_imm): Use offsetT as the type for
min and max parameters. Sign extend values before testing.
2015-04-02 Renlin Li <renlin.li@arm.com>
* config/tc-aarch64.c (mapping_state): Emit MAP_DATA within text section in order.
(mapping_state_2): Don't emit MAP_DATA here.
(s_aarch64_inst): Align frag during state transition.
(md_assemble): Likewise.
2015-04-02 Ed Maste <emaste@freebsd.org>
* config/tc-aarch64.c (set_error_kind): Delete.
(set_error_message): Delete.
2015-04-02 H.J. Lu <hongjiu.lu@intel.com>
* configure: Regenerated.
2015-04-01 Evandro Menezes <e.menezes@samsung.com>
* config/tc-aarch64.c: Add support for Samsung Exynos M1.
* doc/c-aarch64.texi (-mcpu=): Add "exynos-m1".
2015-04-01 Evandro Menezes <e.menezes@samsung.com>
* config/tc-arm.c: Add support for Samsung Exynos M1.
* doc/c-arm.texi (-mcpu=): Add "exynos-m1".
2015-04-01 H.J. Lu <hongjiu.lu@intel.com>
* configure: Regenerated.
2015-03-31 Ed Schouten <ed@nuxi.nl>
* configure.tgt (fmt): Set to elf for *-*-cloudabi*.
2015-03-31 H.J. Lu <hongjiu.lu@intel.com>
* configure.ac: Revert the AM_ZLIB change.
* Makefile.in: Regenerated.
* aclocal.m4: Likewise.
* configure: Likewise.
2015-03-31 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.am (ZLIBINC): New.
(AM_CFLAGS): Add $(ZLIBINC).
* as.c: (show_usage): Don't check HAVE_ZLIB_H.
(parse_args): Likewise.
* compress-debug.c: Don't check HAVE_ZLIB_H to include <zlib.h>.
(compress_init): Don't check HAVE_ZLIB_H.
(compress_data): Likewise.
(compress_finish): Likewise.
* configure.ac (AM_ZLIB): Removed.
(zlibinc): New. AC_SUBST.
Add --with-system-zlib.
* Makefile.in: Regenerated.
* config.in: Likewise.
* configure: Likewise.
* doc/Makefile.in: Likewise.
2015-03-27 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (cpu_flags_set): Removed.
2015-03-25 Renlin Li <renlin.li@arm.com>
* config/tc-aarch64.c (mapping_state): Remove first MAP_DATA emitting
code.
(mapping_state_2): Emit first MAP_DATA symbol here.
2015-03-24 H.J. Lu <hongjiu.lu@intel.com>
PR gas/18087
* write.c (compress_debug): Don't write the zlib header if
compression didn't make the section smaller.
2015-03-24 Terry Guo <terry.guo@arm.com>
* config/tc-arm.c (no_cpu_selected): Use new macro to compare
features.
(parse_psr): Likewise.
(do_t_mrs): Likewise.
(do_t_msr): Likewise.
(static const arm_feature_set arm_ext_*): Defined with new macros.
(static const arm_feature_set arm_cext_*): Likewise.
(static const arm_feature_set fpu_fpa_ext_*): Likewise.
(static const arm_feature_set fpu_vfp_ext_*): Likewise.
(deprecated_coproc_regs): Likewise.
(UL_BARRIER): Likewise.
(barrier_opt_names): Likewise.
(arm_cpus): Likewise.
(arm_extensions): Likewise.
2015-03-20 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (i386_align_code): Limit multi-byte nop
instructions to 10 bytes.
2015-03-19 Nick Clifton <nickc@redhat.com>
* config/tc-rl78.c (enum options): Add G13 and G14.
(md_longopts): Add -mg13 and -mg14.
(md_parse_option): Handle -mg13 and -mg14.
(md_show_usage): List -mg13 and -mg14.
* doc/c-rl78.texi: Add description of -mg13 and -mg14 options.
2015-03-18 Jon Turney <jon.turney@dronecode.org.uk>
Nick Clifton <nickc@redhat.com>
PR binutils/18087
* doc/as.texinfo: Note that when gas compresses debug sections the
compression is only performed if it makes the section smaller.
* write.c (compress_debug): Do not compress a debug section if
doing so would make it larger.
2015-03-17 Ganesh Gopalasubramanian <Ganesh.Gopalasubramanian@amd.com>
* config/tc-i386.c (cpu_arch): Add PROCESSOR_ZNVER flags.
(i386_align_code): Add PROCESSOR_ZNVER cases.
* config/tc-i386.h (processor_type): Add PROCESSOR_ZNVER.
* doc/c-i386.texi: Add znver1 and clzero.
2015-03-16 Nick Clifton <nickc@redhat.com>
* dwarf2dbg.c (out_header): Remove spurious #if 1.
2015-03-13 Jiong Wang <jiong.wang@arm.com>
* config/tc-aarch64.c (warn_unpredictable_ldst): Don't warn on reg
number 31.
2015-03-13 Jiong Wang <jiong.wang@arm.com>
* config/tc-aarch64.h (SUB_SEGMENT_ALIGN): Define to be zero.
2015-03-12 Andrew Bennett <andrew.bennett@imgtec.com>
* config/tc-mips.c (mips_cpu_info_table): Add i6400 entry.
* doc/c-mips.texi: Document i6400 -march option.
2015-03-12 Nick Clifton <nickc@redhat.com>
PR gas/17444
* config/tc-arm.h (MD_APPLY_SYM_VALUE): Pass the current segment
to arm_apply_sym_value. Update prototype.
* config/tc-arm.c (arm_apply_sym_value): Add segment argument.
Do not apply the value if the symbol is in a different segment to
the current segment.
2015-03-11 Alan Modra <amodra@gmail.com>
* config/tc-ppc.c (md_assemble): Don't abort on 8 byte insn fixups.
(md_apply_fix): Report an error on data-only fixups used with insns.
2015-03-10 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* config/tc-s390.c (md_gather_operands): Check for valid
length field operands.
2015-03-10 Michael Perkins <perkinsmg75@yahoo.co.uk>
* config/tc-arm.c (parse_operands): Fix bug setting writeback
values for '^' on OP_REGLSTs.
(do_push_pop): Add new writeback constraint.
2015-03-10 Renlin Li <renlin.li@arm.com>
* config/tc-arm.c (mapping_state): Remove first MAP_DATA emitting code.
(mapping_state_2): Emit first MAP_DATA symbol here.
2015-03-10 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (mapping_state): Set minimum alignment for
code sections.
2015-03-10 Nick Clifton <nickc@redhat.com>
PR gas/17852
* config/tc-arm.c (md_begin): Ensure that selected_cpu is
initialised when CPU_DEFAULT is defined.
2015-03-05 Nick Clifton <nickc@redhat.com>
* config/tc-v850.c (md_parse_option): Fix code to set or clear
EF_RH850_DATA_ALIGN8 bit in ELF header, based upon the use of the
-m8byte-align and -m4byte-align command line options.
2015-03-04 Richard Sandiford <richard.sandiford@arm.com>
PR gas/17843
* config/tc-aarch64.c (process_movw_reloc_info): Allow
R_AARCH64_TLSLE_MOVW_TPREL_G0_NC and R_AARCH64_TLSLE_MOVW_TPREL_G1_NC
for MOVK.
2015-02-28 Alan Modra <amodra@gmail.com>
* write.c (SUB_SEGMENT_ALIGN): Don't pad non-code sections at
end to their alignment.
2015-02-19 Marcus Shawcroft <marcus.shawcroft@arm.com>
* config/tc-aarch64.c (reloc_table_entry): Generate
BFD_RELOC_AARCH64_TLSDESC_ADR_PREL21.
(md_apply_fix, aarch64_force_relocation): Handle
BFD_RELOC_AARCH64_TLSGD_ADR_PREL21.
2015-02-19 Marcus Shawcroft <marcus.shawcroft@arm.com>
* config/tc-aarch64.c (reloc_table_entry): Generate
BFD_RELOC_AARCH64_TLSGD_ADR_PREL21.
(md_apply_fix, aarch64_force_relocation): Handle
BFD_RELOC_AARCH64_TLSGD_ADR_PREL21.
2015-02-19 Marcus Shawcroft <marcus.shawcroft@arm.com>
* config/tc-aarch64.c (reloc_table_entry): Generate
BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_PREL19.
(md_apply_fix, aarch64_force_relocation): Handle
BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_PREL19.
2015-02-26 Marcus Shawcroft <marcus.shawcroft@arm.com>
* config/tc-aarch64.c (reloc_table_entry): Add ld_literal_type.
(reloc_table): Likewise.
(parse_address_main): Use ld_literal_type.
2015-02-26 Marcus Shawcroft <marcus.shawcroft@arm.com>
* config/tc-aarch64.c (reloc_table_entry): Add adr_type.
(reloc_table): Likewise.
(parse_address_main): Use adr_type.
2015-02-26 Marcus Shawcroft <marcus.shawcroft@arm.com>
* config/tc-aarch64.c (aarch64_arch_any, aarch64_arch_node): Remove.
2015-02-25 Andrew Burgess <andrew.burgess@embecosm.com>
* config/tc-avr.c: Add elf32-avr.h include.
(struct avr_property_record_link): New structure.
(avr_output_property_section_header): New function.
(avr_record_size): New function.
(avr_output_property_record): New function.
(avr_create_property_section): New function.
(avr_handle_align): New function.
(exclude_section_from_property_tables): New function.
(create_record_for_frag): New function.
(append_records_for_section): New function.
(avr_create_and_fill_property_section): New function.
(avr_post_relax_hook): New function.
* config/tc-avr.h (md_post_relax_hook): Define.
(avr_post_relax_hook): Declare.
(HANDLE_ALIGN): Define.
(avr_handle_align): Declare.
(strut avr_frag_data): New structure.
(TC_FRAG_TYPE): Define.
2015-02-25 Matthew Wahab <matthew.wahab@arm.com>
* doc/c-arm.texi (-mcpu=): Add cortex-a53, cortex-a57 and
cortex-a72.
2015-02-24 Nick Clifton <nickc@redhat.com>
* config/tc-v850.c (soft_float): New variable.
(v850_data_8): New variable.
(md_show_usage): Add -msoft-float/-mhard-float.
(md_parse_option): Likewise.
(md_begin): Set the default value of soft_float.
(v850_md_end): New function. Creates a note section.
* config/tc-v850.h (md_end): Define.
* doc/c-v850.texi: Document -msoft-float/-mhard-float.
2015-02-23 Yoshinori Sato <ysato@users.sourceforge.jp>
* config/tc-h8300.c (line_separater_chars): Add a version for
h8300-linux that includes a separator.
(default_mach): New variable.
(md_main): Use it.
(md_longopts): Add '--march' option.
(md_parse_option): Parse the new option.
* config/tc-h8300.h (TARGET_FORMAT): Add elf32-h8300-linux.
* configure.tgt: Add h8300-*-linux
* doc/c-h8300.texi: Document --march.
2015-02-23 Nick Clifton <nickc@redhat.com>
PR 17940
* dwarf2dbg.c (out_header): When generating dwarf sections use
real symbols not temps for the start and end symbols.
* config/tc-msp430.h (TC_FORCE_RELOCATION_SUB_SAME): Also prevent
adjustments to relocations in debug sections.
(TC_LINKRELAX_FIXUP): Likewise.
2015-02-19 Alan Modra <amodra@gmail.com>
* doc/as.texinfo (Local Symbol Names): Don't use ':' in pxref.
* doc/c-i386.texi: Reorder i386-Bugs after i386-Arch.
2015-02-11 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (aarch64_cpus): Fix code formatting.
2015-02-11 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-arm.c: Add support for Cortex-A72.
2015-02-09 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
* config/tc-arm.c (warn_deprecated_sp): Use as_tsktsk instead
of as_warn for deprecation messages.
(encode_arm_addr_mode_2): Likewise.
(check_obsolete): Likewise.
(do_rd_rm_rn): Likewise.
(do_co_reg): Likewise.
(do_setend): Likewise.
(do_t_mov_cmp): Likewise.
(do_neon_ldr_str): Likewise.
(opcode_lookup): Likewise.
(if_fsm_post_encode): Likewise.
(md_assemble): Likewise.
2015-02-06 Jan Beulich <jbeulich@suse.com>
* dw2gencfi.c (select_cie_for_fde): Also bail on CFI_label.
(cfi_change_reg_numbers): Also do nothing for CFI_label.
(cfi_pseudo_table): Also handle .cfi_label when not supporting
CFI directives.
2015-02-05 Alan Modra <amodra@gmail.com>
* config/tc-msp430.c (md_assemble): Correct size passed to
extract_cmd. Remove index check.
2015-02-04 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (aarch64_cpus): Add support for Cortex-A72.
* doc/c-aarch64.texi (-mcpu=): Add "cortex-a72".
2015-02-04 Nick Clifton <nickc@redhat.com>
* config/rl78-parse.y (addsubw): Fix encoding of [HL] variant of
these instructions.
2015-02-03 Renlin Li <renlin.li@arm.com>
* doc/c-aarch64.texi (.arch): Document the directive.
(.arch_extension): Likewise.
2015-02-03 Nick Clifton <nickc@redhat.com>
* config/tc-rl78.h (TC_PARSE_CONS_EXPRESSION): Define.
2015-01-28 James Bowman <james.bowman@ftdichip.com>
* Makefile.am: Add FT32 files.
* config/tc-ft32.c: New file.
* config/tc-ft32.h: New file.
* configure.tgt: Add FT32 support.
* Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
2015-01-27 Kuan-Lin Chen <kuanlinchentw@gmail.com>
* config/tc-nds32.c (do_pseudo_la_internal): Limit the second argument
of instruction la to a symbol.
2015-01-27 Kuan-Lin Chen <kuanlinchentw@gmail.com>
* config/tc-nds32.c (nds32_parse_name): Ignore when the input is
section name.
2015-01-19 Alan Modra <amodra@gmail.com>
* read.c (s_reloc): Match BFD_RELOC_NONE, BFD_RELOC{8,16,32,64}.
* write.c (get_frag_for_reloc): Allow match just past end of frag.
2015-01-16 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* config/tc-s390.c (struct pd_reg): Remove.
(pre_defined_registers): Remove.
(REG_NAME_CNT): Remove.
(reg_name_search): Calculate the register number instead of doing
a lookup.
(register_name, tc_s390_regname_to_dw2regnum): Adopt to the new
reg_name_search signature.
(s390_parse_cpu): Support the new arch string z13.
(s390_insert_operand): Support for vector registers with the extra
field for the fifth bit of each vector register operand.
(md_gather_operand): Adjust to the new handling of optional
parameters.
* doc/as.texinfo: Document the z13 cpu string.
2015-01-13 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-arm.c (parse_ifimm_zero): Accept #0x0 as a synonym for
#0, restoring previous behaviour.
2015-01-12 Jan Beulich <jbeulich@suse.com>
* dw2gencfi.c (cfi_add_label, dot_cfi_label): New.
(cfi_pseudo_table): Add "cfi_label".
(output_cfi_insn): Handle CFI_label.
(select_cie_for_fde): Als terminate CIE when encountering
CFI_label.
* dw2gencfi.h (cfi_add_label): Declare.
(struct cfi_insn_data): New member "sym_name".
(CFI_label): New.
* read.c (read_symbol_name): Drop "static".
* read.h (read_symbol_name): Declare.
2015-01-12 Jan Beulich <jbeulich@suse.com>
* config/tc-arm.c (do_neon_shl_imm): Check immediate range.
(do_neon_qshl_imm): Likewise.
2015-01-12 Alan Modra <amodra@gmail.com>
* read.c (s_altmacro, s_reloc): Make definition static.
2015-01-10 Andrew Burgess <andrew.burgess@embecosm.com>
* config/tc-avr.c (md_apply_fix): Update the contents of VALP for
diff fixups.
2015-01-09 Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
* config/tc-arm.c (arm_cpus): Add support for APM X-Gene 1 and
X-Gene 2.
* doc/c-arm.texi (ARM Options): Mention xgene1 and xgene2.
2015-01-07 Jan Beulich <jbeulich@suse.com>
* config/tc-arm.c (struct arm_option_extension_value_table):
Split field "value" into fields "merge_value" and "clear_value".
(arm_extensions): Adjust initializer accordingly.
2015-01-01 Alan Modra <amodra@gmail.com>
* as.c (parse_args): Just print current year.
2015-01-01 Alan Modra <amodra@gmail.com>
Update year range in copyright notice of all files.
For older changes see ChangeLog-2014
Copyright (C) 2015 Free Software Foundation, Inc.
Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
notice and this notice are preserved.
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End: