OpenE2K/binutils-gdb
12
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
b79de3a178
binutils-gdb/build-all.mk
Jason Molenda ac42799daa Tue Mar 28 14:47:34 1995 Jason Molenda (crash@phydeaux.cygnus.com) 
build-all.mk,config/mh-solaris:  revert these two changes:

        Tue Mar 30 10:03:09 1993  Ian Lance Taylor  (ian@cygnus.com)

                * build-all.mk: Use CC=cc -Xs on Solaris.

        Mon Mar 29 19:59:26 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

                * config/mh-solaris: SunPRO C needs -Xs to be able to get a
                working xmakefile for Emacs.

xmakefile no longer used for emacs; recent versions of SunPRO C
allegedly drop -Xs; running configure will assume ``cc'' but when you
compile, it uses ``cc -Xs'' (ansi vs old SunOS behavior) which causes
all kinds of problems rebuilding the source using the SunPRO compiler.
1995-03-28 22:50:45 +00:00

464 lines
13 KiB
Makefile
Raw Blame History

# Build all of the targets for any given host.....
#
# This file is going to be ugly. It will be VERY specific to the
# Cygnus environment and build-process.
#
# Useful targets (rt = recursion target):
# (please correct or expand on this)
# FIXME: Might some of these be superfluous?
#
# all-emacs
# all-cygnus - set up install directories, build 3stage native and all
# supported cross targets, then check 3stage'd native
# (rt = $(canonhost)-stamp-3stage-done, do-cygnus for cross)
# native - set up install directories, build 3stage native
# (rt = $(canonhost)-stamp-3stage-1)
# build-cygnus - build 3stage native and all supported cross targets
# (rt = $(canonhost)-stamp-3stage-done, build-cygnus for cross)
# build-latest - build all supported cross targets
# (rt = build-latest)
# all-native - set up install directories, build native
# (rt = do-native)
# all-cross - set up install directories, build all targets
# (rt = do-cygnus)
# config - configure native and all supported cross targets
# (rt = do1-config, do-native-config for cross)
# build - build native and all supported cross targets
# (rt = do1-build, build-native for cross)
# 3build - build 3stage native and all supported cross targets
# (rt = all, build-cygnus for cross)
# build-all-latest - build 3stage native and all supported cross targets
# (rt = $(canonhost)-stamp-3stage-done, build-latest for cross)
# clean - remove objdir directories, stamp files
# (rt = clean)
#
# To configure/build for fewer targets, specify TARGETS="native cross1 ...".
TREE = devo
include $(TREE)/release-info
TEST_INSTALL_DISK = /abc
INSTALLDIR = $(TEST_INSTALL_DISK)/$(TREE)-test/$(RELEASE_TAG)
ifndef host
host := $(shell $(TREE)/config.guess)
endif
NATIVE = native
GCC = gcc -O2
CFLAGS = -g
CXXFLAGS = -g -O2 -fexternal-templates
MAKEINFOFLAGS =
log = 1>$(canonhost)-build-log 2>&1
clog = 1>$(canonhost)-check-log 2>&1
cyglog = 1> $(canonhost)-x-$$i-cygnus-build-log 2>&1
latestlog = 1> $(canonhost)-x-$$i-latest-build-log 2>&1
natlog = 1> $(canonhost)-x-$$i-native-build-log 2>&1
canonhost := $(shell $(TREE)/config.sub $(host))
# Convert config.guess results to a simpler form.
ifeq ($(canonhost),sparc-sun-solaris2.1)
canonhost := sparc-sun-solaris2
endif
ifeq ($(canonhost),sparc-sun-solaris2.3)
canonhost := sparc-sun-solaris2
endif
ifeq ($(canonhost),mips-dec-ultrix4.2)
canonhost := mips-dec-ultrix
endif
ifeq ($(canonhost),mips-sgi-irix4.0.1)
canonhost := mips-sgi-irix4
endif
ifeq ($(canonhost),mips-sgi-irix4.0.5H)
canonhost := mips-sgi-irix4
endif
ifeq ($(canonhost),mips-sgi-irix5.2)
canonhost := mips-sgi-irix5
endif
ifeq ($(canonhost),rs6000-ibm-aix3.2)
canonhost := rs6000-ibm-aix
endif
ifeq ($(canonhost),i486-unknown-sco3.2v4.0)
canonhost := i386-sco3.2v4
endif
ifeq ($(canonhost),i386-unknown-sco3.2v4.0)
canonhost := i386-sco3.2v4
endif
ifeq ($(canonhost),i386-unknown-sco3.2v4)
canonhost := i386-sco3.2v4
endif
ifeq ($(canonhost),i386-unknown-go32)
canonhost := i386-go32
endif
ifeq ($(canonhost),i386-unknown-sysv4.2)
canonhost := i386-sysv4.2
endif
ifeq ($(canonhost),i386-lynx-lynxos)
canonhost := i386-lynx
endif
ifeq ($(canonhost),m68k-lynx-lynxos)
canonhost := m68k-lynx
endif
ifeq ($(canonhost),sparc-lynx-lynxos)
canonhost := sparc-lynx
endif
ifeq ($(canonhost),rs6000-lynx-lynxos)
canonhost := rs6000-lynx
endif
#
# The following TARGETS variable settings probably ought to
# be made automatically from the
# /s1/cygnus/progressive/host-target-pairs.tbl file, using
# the /s1/cygnus/progressive/targets script. But, be sure
# that the native is spelled 'native'.
#
ifeq ($(canonhost),sparc-sun-sunos4.1.3)
TARGETS = $(NATIVE) \
i386-go32 \
a29k-amd-udi \
h8300-hms \
i386-aout \
i386-lynx \
i960-vxworks5.0 i960-vxworks5.1 \
mips-idt-ecoff mips64-elf mips-elf \
m68k-aout m68k-vxworks m68k-coff \
m68k-lynx \
sh-hms \
sparc-aout sparc-lynx sparc-vxworks \
sparclite-aout sparclite-vxworks \
sparclite-coff z8k-coff \
OSE68000 OSE68k mips-ncd-elf
# The OSE68000 and OSE68k targets are for Ericsson only;
# the mips-ncd-elf target is for NCD only.
GCC = gcc -O2 -pipe
all: all-cygnus
endif
ifeq ($(canonhost),m68k-sun-sunos4.1.1)
TARGETS = $(NATIVE) \
m68k-coff
GCC = gcc -O2 -msoft-float
CC = cc -J
all: all-cygnus
endif
ifeq ($(canonhost),sparc-sun-solaris2)
TARGETS = $(NATIVE) \
a29k-amd-udi \
i960-vxworks5.0 i960-vxworks5.1 \
m68k-aout m68k-coff m68k-vxworks \
mipsel-idt-ecoff sparc-lynx \
sparclite-aout sparclite-coff m88k-coff z8k-coff \
OSE68000 OSE68k \
sparc-sun-sunos4.1.3
# The latter assures that BNR's special build (which they now
# do for themselves from sources) hasn't developed bit-rot.
# The OSE68000 and OSE68k targets are for Ericsson only.
CC = cc
GCC = gcc -O2 -pipe
all: all-cygnus
endif
ifeq ($(canonhost),mips-dec-ultrix)
TARGETS = $(NATIVE) m68k-aout
CC = cc -Wf,-XNg1000
all: all-cygnus
endif
ifeq ($(canonhost),alpha-dec-osf1.3)
TARGETS = $(NATIVE)
CC = cc
all: all-cygnus
endif
ifeq ($(canonhost),mips-sgi-irix4)
TARGETS = $(NATIVE) \
mips-idt-ecoff sh-hms \
mips64-elf
CC = cc -cckr -Wf,-XNg1500 -Wf,-XNk1000 -Wf,-XNh2000
all: all-cygnus
endif
ifeq ($(canonhost),mips-sgi-irix5)
TARGETS = $(NATIVE) \
mips-idt-ecoff sh-hms \
mips64-elf
CC = cc -cckr -Wf,-XNg1500 -Wf,-XNk1000 -Wf,-XNh2000
all: all-cygnus
endif
ifeq ($(canonhost),rs6000-ibm-aix)
TARGETS = $(NATIVE) \
i960-vxworks5.0 i960-vxworks5.1 \
m68k-aout
all: all-cygnus
endif
ifeq ($(canonhost),m68k-hp-hpux)
TARGETS = $(NATIVE) m68k-aout
TMPDIR := $(shell mkdir $(canonhost)-tmpdir; cd $(canonhost)-tmpdir ; pwd)
CC = cc -Wp,-P
#CFLAGS = +O1000
CFLAGS = -g
all: all-cygnus
endif
ifeq ($(canonhost),hppa1.1-hp-hpux)
TARGETS = \
$(NATIVE) \
i960-vxworks5.0 i960-vxworks5.1 \
m68k-aout m68k-coff m68k-vxworks \
z8k-coff
CC = cc -Wp,-H256000
#CFLAGS = +Obb2000
CFLAGS = -g
all: all-cygnus
endif
ifeq ($(canonhost),i386-sco3.2v4)
TARGETS = $(NATIVE) i386-aout
all: all-cygnus
endif
ifeq ($(canonhost),i386-go32)
TARGETS = \
a29k-amd-udi \
h8300-hms \
i386-aout \
m68k-aout m68k-coff \
mips-idt-ecoff \
sh-hms \
sparclite-aout
CC = i386-go32-gcc
GCC = i386-go32-gcc -O2
CFLAGS =
CXXFLAGS = -O2
MAKEINFOFLAGS = --no-split
all: all-dos
endif
ifeq ($(canonhost),i386-sysv4.2)
TARGETS = $(NATIVE) i386-netware
CC = cc
all: all-cygnus
endif
ifeq ($(canonhost),i386-lynx)
TARGETS = $(NATIVE)
CC = /usr/cygnus/progressive/bin/gcc
all: all-cygnus
SHELL=/bin/bash
endif
ifeq ($(canonhost),m68k-lynx)
TARGETS = $(NATIVE)
CC = /usr/cygnus/progressive/bin/gcc
all: all-cygnus
SHELL=/bin/bash
endif
ifeq ($(canonhost),sparc-lynx)
TARGETS = $(NATIVE)
CC = /usr/cygnus/progressive/bin/gcc
all: all-cygnus
SHELL=/bin/bash
endif
ifeq ($(canonhost),rs6000-lynx)
TARGETS = $(NATIVE)
CC = /usr/cygnus/progressive/bin/gcc
all: all-cygnus
SHELL=/bin/bash
endif
FLAGS_TO_PASS := \
"GCC=$(GCC)" \
"CC=$(CC)" \
"CFLAGS=$(CFLAGS)" \
"CXXFLAGS=$(CXXFLAGS)" \
"host=$(canonhost)" \
"MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
"RELEASE_TAG=$(RELEASE_TAG)" \
"SHELL=$(SHELL)"
# set GNU_MAKE and CONFIG_SHELL correctly in sub-builds
ifeq ($(patsubst %-lynx,lynx,$(canonhost)),lynx)
FLAGS_TO_PASS := $(FLAGS_TO_PASS) "GNU_MAKE=$(MAKE)" "CONFIG_SHELL=/bin/bash"
endif
all-emacs:
@echo build started at `date`
[ -d $(INSTALLDIR) ] || mkdir $(INSTALLDIR)
-rm -f $(ROOTING)/$(RELEASE_TAG)
ln -s $(INSTALLDIR) $(ROOTING)/$(RELEASE_TAG)
$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) do1 > $(canonhost)-emacs-native-log 2>&1
$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) do-latest > $(canonhost)-emacs-latest-log 2>&1
@echo done at `date`
all-cygnus:
@echo build started at `date`
[ -d $(INSTALLDIR) ] || mkdir $(INSTALLDIR)
-rm -f $(ROOTING)/$(RELEASE_TAG) && ln -s $(INSTALLDIR) $(ROOTING)/$(RELEASE_TAG)
#
# The following line to be used during regular progressive builds
# to help developers test, but should be commented out for final
# progressive build.
#
# -rm -f $(ROOTING)/progressive-beta && ln -s $(RELEASE_TAG) $(ROOTING)/progresssive
@for i in $(TARGETS) ; do \
if [ "$$i" = "native" ] ; then \
if [ ! -f $(canonhost)-stamp-3stage-done ] ; then \
echo "3staging $(canonhost) native" ; \
echo Flags passed to make: $(FLAGS_TO_PASS) ; \
$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) $(canonhost)-stamp-3stage-done $(log) && \
echo " completed successfully" ; \
else \
true ; \
fi ; \
else \
echo "building $(canonhost) cross to $$i" ; \
$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i do-cygnus $(cyglog) && \
echo " completed successfully" ; \
fi ; \
done
@if [ ! -f $(canonhost)-stamp-3stage-checked ] ; then \
echo checking $(canonhost) native ; \
$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) $(canonhost)-check-3stage $(clog) ; \
touch $(canonhost)-stamp-3stage-checked ; \
else \
true ; \
fi
@echo done at `date`
native:
@echo build started at `date`
[ -d $(INSTALLDIR) ] || mkdir $(INSTALLDIR)
-rm -f $(ROOTING)/$(RELEASE_TAG) && ln -s $(INSTALLDIR) $(ROOTING)/$(RELEASE_TAG)
# -rm -f $(ROOTING)/progressive-beta && ln -s $(RELEASE_TAG) $(ROOTING)/progressive-beta
$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) $(canonhost)-stamp-3stage-done $(log)
@echo done at `date`
build-cygnus:
@echo build started at `date`
@for i in $(TARGETS) ; do \
if [ "$$i" = "native" ] ; then \
if [ ! -f $(canonhost)-3stage-done ] ; then \
echo "3staging $(canonhost) native" ; \
$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) $(canonhost)-stamp-3stage-done $(log) && \
echo " completed successfully" ; \
fi ; \
else \
echo "building $(canonhost) cross to $$i:" `date` ; \
$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build-cygnus $(cyglog) && \
echo " completed successfully" ; \
fi ; \
done
@echo done at `date`
build-latest:
@echo build started at `date`
@for i in $(TARGETS) ; do \
if [ "$$i" != "native" ] ; then \
echo "building $(canonhost) cross to $$i:" `date` ; \
$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build-latest $(latestlog) && \
echo " completed successfully" ; \
fi ; \
done
@echo done at `date`
all-native:
[ -d $(INSTALLDIR) ] || mkdir $(INSTALLDIR)
rm -f $(ROOTING)/$(RELEASE_TAG)
ln -s $(INSTALLDIR) $(ROOTING)/$(RELEASE_TAG)
@for i in $(TARGETS) ; do \
echo "building $(canonhost) cross to $$i" ; \
$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i do-native $(natlog) && \
echo " completed successfully" ; \
done
all-cross:
[ -d $(INSTALLDIR) ] || mkdir $(INSTALLDIR)
rm -f $(ROOTING)/$(RELEASE_TAG)
ln -s $(INSTALLDIR) $(ROOTING)/$(RELEASE_TAG)
@for i in $(TARGETS) ; do \
echo "building $(canonhost) cross to $$i" ; \
$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build=$(build) do-cygnus $(cyglog) && \
echo " completed successfully" ; \
done
do-dos:
$(MAKE) -f build-all.mk build=$(host) host=i386-go32 all-dos
all-dos:
@for i in $(TARGETS) ; do \
echo "building $(canonhost) cross to $$i" ; \
$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) host=$(host) target=$$i do-dos $(cyglog) && \
echo " completed successfully at `date`" ; \
done
config:
@for i in $(TARGETS) ; do \
if [ "$$i" = "native" ] ; then \
echo "config stage1 for $(canonhost)" ; \
$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) do1-config $(log) && \
echo " completed successfully" ; \
else \
echo "config $(canonhost) cross to $$i" ; \
$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i do-native-config $(cyglog) && \
echo " completed successfully" ; \
fi ; \
done
build:
@for i in $(TARGETS) ; do \
if [ "$$i" = "native" ] ; then \
$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) do1-build $(log) && \
echo " completed successfully" ; \
else \
echo "building $(canonhost) cross to $$i" ; \
$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build-native $(natlog) && \
echo " completed successfully" ; \
fi ; \
done
3build:
@for i in $(TARGETS) ; do \
if [ "$$i" = "native" ] ; then \
echo "building 3stage for $(canonhost)" ; \
$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) all $(log) && \
echo " completed successfully" ; \
else \
echo "building $(canonhost) cross to $$i" ; \
$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build-cygnus $(cyglog) && \
echo " completed successfully" ; \
fi ; \
done
build-all-latest:
@for i in $(TARGETS) ; do \
if [ "$$i" = "native" ] ; then \
echo "building 3stage for $(canonhost)" ; \
$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) $(canonhost)-stamp-3stage-done $(log) && \
echo " completed successfully" ; \
else \
echo "building $(canonhost) cross to $$i" ; \
$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build-latest $(cyglog) && \
echo " completed successfully" ; \
fi ; \
done
clean:
$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) clean $(log)
### Local Variables:
### fill-column: 131
### End:
Reference in New Issue View Git Blame Copy Permalink