binutils-gdb/gdb/configure.in
Stu Grossman cd10c7e388 * breakpoint.c (breakpoint_re_set): #ifdef GET_LONGJMP_TARGET
around calls to create_longjmp_breakpoint.  Why install the
	breakpoints if we can't find the longjmp target?
	* infrun.c (wait_for_inferior):  Cleanup comments near call test.
	* remote-mips.c:  Fixed a bunch of prototypes to avoid char/int
	complaint from picky compilers.  Add comment to mips_expect.
	Replace all instances of sr_get_debug with remote_debug.
	* (mips_readchar):  Don't jam init string to monitor.
	mips_initialize() handles that.
	* (mips_receive_header):  Print better message when we get too
	much garbage.
	* (mips_request):  Allow caller to pass in buff to allow them to
	analyze the returned message.
	* (mips_initialize):  Re-do initialization to try sending a BREAK,
	a ^C, and then a download escape sequence.  Cleanup protocol
	startup.  Eliminate sleeps.  Clear breakpoints (if using monitor
	breakpoints).  Re-init frame.
	* (mips_detach):  Close down target.
start-sanitize-gm
	* (mips_resume):  Pass signal down to target.
	* (mips_create_inferior):  Start target with TARGET_SIGNAL_PWR.
end-sanitize-gm
	* (mips_wait):  Handle return status with registers, or breakpoint stuff.
	* (mips_kill):  Add ^C handling.
	* (mips_insert_breakpoint mips_remove_breakpoint):  Call new
	breakpoint stuff if enabled.
	* (calculate_mask remote_mips_set_watchpoint
	remote_mips_remove_watchpoint remote_mips_stopped_by_watchpoint):
	Hardware watchpoint/breakpoint stuff.
	* (common_breakpoint):  Common code for new monitor breakpoint commands.
	* (mips_load):  Don't use `prompt'.  It's a global variable.
	* top.c (dont_repeat_command):  New command for use in
	user-defined commands to suppress auto-repeat (by hittin return key).
start-sanitize-gm
	* utils.c (request_quit):  Call target_kill here.  Good idea.
	Needs a better implementation.
end-sanitize-gm
	* valops.c:  Add start of auto function-call abandonment capability.

start-sanitize-gm
	* c-exp.y:  Add code (currently disabled) to handle GM dynamic
	structures (it conflicts with @!).
	* eval.c (evaluate_subexp_standard):  ditto.
	* expprint.c (print_subexp dump_expression):  ditto.
	* expression.h (enum exp_opcode):  ditto.
	* parse.c (length_of_subexp):  ditto.
	* configure, configure.in:  Add mip*-*-magic* target.
	* magic.c magic.h:  Special routines to handle GM stuff (like
	stepping through dispatcher).
end-sanitize-gm
1995-10-27 17:48:36 +00:00

598 lines
16 KiB
Plaintext

dnl Process this file with autoconf to produce a configure script.
AC_PREREQ(2.3)dnl
AC_INIT(main.c)
CC=${CC-cc}
AC_PROG_CC
AC_AIX
AC_MINIX
AC_ISC_POSIX
AC_PROG_INSTALL
AC_PROG_RANLIB
AC_PROG_YACC
AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/..)
AC_CANONICAL_SYSTEM
AC_ARG_PROGRAM
AC_HEADER_STDC
AC_CHECK_HEADERS(memory.h string.h strings.h unistd.h termios.h termio.h sgtty.h)
AC_HEADER_STAT
AC_FUNC_MMAP
dnl Handle optional features that can be enabled.
ENABLE_CFLAGS=
ENABLE_CLIBS=
ENABLE_OBS=
AC_ARG_ENABLE(netrom,
[ --enable-netrom ],
[case "${enableval}" in
yes) enable_netrom=yes ;;
no) enable_netrom=no ;;
*) AC_MSG_ERROR(bad value ${enableval} given for netrom option) ;;
esac])
if test "${enable_netrom}" = "yes"; then
ENABLE_OBS="${ENABLE_OBS} remote-nrom.o"
fi
# start-sanitize-gdbtk
ENABLE_GDBTK=
AC_ARG_ENABLE(gdbtk,
[ --enable-gdbtk ],
[case "${enableval}" in
yes) enable_gdbtk=yes ;;
no) enable_gdbtk=no ;;
*) AC_MSG_ERROR(bad value ${enableval} given for gdbtk option) ;;
esac])
if test "${enable_gdbtk}" = "yes"; then
AC_PATH_X
AC_PATH_XTRA
CYGNUS_PATH_TK
CYGNUS_PATH_TCL
ENABLE_GDBTK=1
if test "x$no_x" != "xyes"; then
if test "x$x_includes" != "x" ;
then
X_CFLAGS="-I$x_includes"
else
X_CFLAGS=""
fi
if test "x$x_libraries" != "x" ;
then
X_LDFLAGS="-L$x_libraries"
else
X_LDFLAGS=""
fi
case "$host" in
#
# gdb linked statically w/ Solaris iff GCC is used, otherwise dynamic
#
sparc-sun-solaris2*)
if test "x$GCC" = "xyes";
then
X_LIBS="-Wl,-Bstatic -lX11 -lXext -lX11 -Wl,-Bdynamic"
else
if test "x$x_libraries" != "x" ;
then
X_LDFLAGS="$X_LDFLAGS -R$x_libraries"
fi
X_LIBS="-lX11 -lXext -lX11"
fi ;;
#
# gdb linked statically w/ SunOS or HPUX
#
m68k-hp-hpux*|hppa*-hp-hpux*|sparc-sun-sunos*)
if test "x$x_libraries" != "x" ;
then
X_LIBS="$x_libraries/libX11.a"
else
X_LIBS="/usr/lib/libX11.a"
fi ;;
#
# default is to link dynamically
#
*)
X_LIBS="-lX11" ;;
esac
else
X_LDLAGS=""
X_CFLAGS=""
X_LIBS=""
AC_MSG_WARN([No X based programs will be built])
fi
TCL_LIBS='$(TCL) $(TK) $(X11_LDFLAGS) $(X11_LIBS)'
ENABLE_CLIBS="${ENABLE_CLIBS} ${TCL_LIBS} -lm"
ENABLE_OBS="${ENABLE_OBS} gdbtk.o"
fi
AC_SUBST(ENABLE_GDBTK)
AC_SUBST(X_CLFAGS)
AC_SUBST(X_LDFLAGS)
AC_SUBST(X_LIBS)
# end-sanitize-gdbtk
AC_SUBST(ENABLE_CFLAGS)
AC_SUBST(ENABLE_CLIBS)
AC_SUBST(ENABLE_OBS)
configdirs="doc testsuite"
dnl
changequote(,)dnl
# Map host cpu into the config cpu subdirectory name.
# The default is $host_cpu.
case "${host_cpu}" in
c[12]) gdb_host_cpu=convex ;;
hppa*) gdb_host_cpu=pa ;;
i[345]86) gdb_host_cpu=i386 ;;
m68*) gdb_host_cpu=m68k ;;
m88*) gdb_host_cpu=m88k ;;
np1) gdb_host_cpu=gould ;;
pyramid) gdb_host_cpu=pyr ;;
powerpc*) gdb_host_cpu=powerpc ;;
*) gdb_host_cpu=$host_cpu ;;
esac
# map host info into gdb names.
case "${host}" in
a29k-*-*) gdb_host=ultra3 ;;
alpha-*-osf1*) gdb_host=alpha-osf1 ;;
alpha-*-osf2*) gdb_host=alpha-osf2 ;;
alpha-*-osf[3456789]*) gdb_host=alpha-osf3 ;;
arm-*-*) gdb_host=arm ;;
c[12]-*-*) gdb_host=convex ;;
hppa*-*-bsd*) gdb_host=hppabsd ;;
hppa*-*-hiux*) gdb_host=hppahpux ;;
hppa*-*-hpux*) gdb_host=hppahpux ;;
hppa*-*-osf*) gdb_host=hppaosf ;;
i[345]86-ncr-*) gdb_host=ncr3000 ;;
i[345]86-sequent-bsd*) gdb_host=symmetry ;; # dynix
i[345]86-sequent-sysv4*) gdb_host=ptx4 ;;
i[345]86-sequent-sysv*) gdb_host=ptx ;;
i[345]86-*-aix*) gdb_host=i386aix ;;
i[345]86-*-bsd*) gdb_host=i386bsd ;;
i[345]86-*-freebsd*) gdb_host=fbsd ;;
i[345]86-*-netbsd*) gdb_host=nbsd ;;
i[345]86-*-go32*) gdb_host=go32 ;;
i[345]86-*-linux*) gdb_host=linux ;;
i[345]86-*-lynxos*) gdb_host=i386lynx ;;
i[345]86-*-mach3*) gdb_host=i386m3 ;;
i[345]86-*-mach*) gdb_host=i386mach ;;
i[345]86-*-osf1mk*) gdb_host=osf1mk ;;
i[345]86-*-sco3.2v4*) gdb_host=i386sco4 ;;
i[345]86-*-sco*) gdb_host=i386sco ;;
i[345]86-*-solaris*) gdb_host=i386sol2 ;;
i[345]86-*-sunos*) gdb_host=sun386 ;;
i[345]86-*-sysv3.2*) gdb_host=i386v32 ;;
i[345]86-*-sysv32*) gdb_host=i386v32 ;;
i[345]86-*-sysv4*) gdb_host=i386v4 ;;
i[345]86-*-unixware) gdb_host=i386v4 ;;
i[345]86-*-sysv*) gdb_host=i386v ;;
i[345]86-*-isc*) gdb_host=i386v32 ;;
i[345]86-*-os9k) gdb_host=i386os9k ;;
i[345]86-*-win32*) gdb_host=win32 ;;
m680[01]0-sun-sunos3*) gdb_host=sun2os3 ;;
m680[01]0-sun-sunos4*) gdb_host=sun2os4 ;;
m68030-sony-*) gdb_host=news1000 ;;
m68*-altos-*) gdb_host=altos ;;
m68*-apollo*-sysv*) gdb_host=apollo68v ;;
m68*-apollo*-bsd*) gdb_host=apollo68b ;;
m68*-att-*) gdb_host=3b1 ;;
m68*-bull*-sysv*) gdb_host=dpx2 ;;
m68*-hp-bsd*) gdb_host=hp300bsd ;;
m68*-hp-hpux*) gdb_host=hp300hpux ;;
m68*-isi-*) gdb_host=isi ;;
m68*-*-lynxos*) gdb_host=m68klynx ;;
m68*-*-sysv4*) gdb_host=m68kv4 ;;
m68*-motorola-*) gdb_host=delta68 ;;
m68*-sony-*) gdb_host=news ;;
m68*-sun-sunos3*) gdb_host=sun3os3 ;;
m68*-sun-sunos4*) gdb_host=sun3os4 ;;
m68*-sun-*) gdb_host=sun3os4 ;;
m88*-harris-cxux*) gdb_host=cxux ;;
m88*-motorola-sysv4*) gdb_host=delta88v4 ;;
m88*-motorola-sysv*) gdb_host=delta88 ;;
m88*-*-mach3*) gdb_host=mach3 ;;
m88*-*-*) gdb_host=m88k ;;
mips-dec-mach3*) gdb_host=mach3 ;;
mips-dec-*) gdb_host=decstation ;;
mips-little-*) gdb_host=littlemips ;;
mips-sgi-irix3*) gdb_host=irix3 ;;
mips-sgi-irix4*) gdb_host=irix4 ;;
mips-sgi-irix5*) gdb_host=irix5 ;;
mips-sony-*) gdb_host=news-mips ;;
mips-*-mach3*) gdb_host=mach3 ;;
mips-*-sysv4*) gdb_host=mipsv4 ;;
mips-*-sysv*) gdb_host=riscos ;;
mips-*-riscos*) gdb_host=riscos ;;
none-*-*) gdb_host=none ;;
np1-*-*) gdb_host=np1 ;;
ns32k-*-mach3*) gdb_host=mach3 ;;
ns32k-*-netbsd*) gdb_host=nbsd ;;
ns32k-umax-*) gdb_host=umax ;;
ns32k-utek-sysv*) gdb_host=merlin ;;
powerpc-*-aix*) gdb_host=aix ;;
pn-*-*) gdb_host=pn ;;
pyramid-*-*) gdb_host=pyramid ;;
romp-*-*) gdb_host=rtbsd ;;
rs6000-*-lynxos*) gdb_host=rs6000lynx ;;
rs6000-*-*) gdb_host=rs6000 ;;
sparc-*-lynxos*) gdb_host=sparclynx ;;
sparc-*-netbsd*) gdb_host=nbsd ;;
sparc-*-solaris2*) gdb_host=sun4sol2 ;;
sparc-*-sunos4*) gdb_host=sun4os4 ;;
sparc-*-sunos5*) gdb_host=sun4sol2 ;;
sparc-*-*) gdb_host=sun4os4 ;;
tahoe-*-*) gdb_host=tahoe ;;
vax-*-bsd*) gdb_host=vaxbsd ;;
vax-*-ultrix2*) gdb_host=vaxult2 ;;
vax-*-ultrix*) gdb_host=vaxult ;;
w65-*-*) gdb_host=w65 ;;
esac
# Map target cpu into the config cpu subdirectory name.
# The default is $target_cpu.
case "${target_cpu}" in
alpha) gdb_target_cpu=alpha ;;
c[12]) gdb_target_cpu=convex ;;
hppa*) gdb_target_cpu=pa ;;
i[345]86) gdb_target_cpu=i386 ;;
m68*) gdb_target_cpu=m68k ;;
m88*) gdb_target_cpu=m88k ;;
mips*) gdb_target_cpu=mips ;;
np1) gdb_target_cpu=gould ;;
powerpc*) gdb_target_cpu=powerpc ;;
pn) gdb_target_cpu=gould ;;
pyramid) gdb_target_cpu=pyr ;;
sparc*) gdb_target_cpu=sparc ;;
*) gdb_target_cpu=$target_cpu ;;
esac
# map target info into gdb names.
case "${target}" in
a29k-*-aout*) gdb_target=a29k ;;
a29k-*-coff*) gdb_target=a29k ;;
a29k-*-elf*) gdb_target=a29k ;;
a29k-*-ebmon*) gdb_target=a29k ;;
a29k-*-kern*) gdb_target=a29k-kern ;;
a29k-*-none*) gdb_target=a29k ;;
a29k-*-sym1*) gdb_target=ultra3 ;;
a29k-*-udi*) gdb_target=a29k-udi ;;
a29k-*-vxworks*) gdb_target=vx29k ;;
alpha-*-osf*) gdb_target=alpha-osf1 ;;
# start-sanitize-arc
arc-*-*) gdb_target=arc ;;
# end-sanitize-arc
arm-*-*) gdb_target=arm ;;
c1-*-*) gdb_target=convex ;;
c2-*-*) gdb_target=convex ;;
h8300-*-*) gdb_target=h8300 ;;
h8500-*-*) gdb_target=h8500 ;;
sh-*-*) gdb_target=sh ;;
# start-sanitize-r16
r16-*-*) gdb_target=r16 ;;
# end-sanitize-r16
hppa*-*-bsd*) gdb_target=hppabsd ;;
hppa*-*-pro*) gdb_target=hppapro ;;
hppa*-*-hpux*) gdb_target=hppahpux ;;
hppa*-*-hiux*) gdb_target=hppahpux ;;
hppa*-*-osf*) gdb_target=hppaosf ;;
i[345]86-sequent-bsd*) gdb_target=symmetry ;;
i[345]86-sequent-sysv4*) gdb_target=ptx4 ;;
i[345]86-sequent-sysv*) gdb_target=ptx ;;
i[345]86-ncr-*) gdb_target=ncr3000 ;;
i[345]86-*-aout*) gdb_target=i386aout ;;
i[345]86-*-coff*) gdb_target=i386v ;;
i[345]86-*-elf*) gdb_target=i386v ;;
i[345]86-*-aix*) gdb_target=i386aix ;;
i[345]86-*-bsd*) gdb_target=i386bsd ;;
i[345]86-*-freebsd*) gdb_target=fbsd ;;
i[345]86-*-netbsd*) gdb_target=nbsd ;;
i[345]86-*-os9k) gdb_target=i386os9k ;;
i[345]86-*-go32*) gdb_target=i386aout ;;
i[345]86-*-lynxos*) gdb_target=i386lynx
configdirs="${configdirs} gdbserver" ;;
i[345]86-*-solaris*) gdb_target=i386sol2 ;;
i[345]86-*-sunos*) gdb_target=sun386 ;;
i[345]86-*-sysv4*) gdb_target=i386v4 ;;
i[345]86-*-sco*) gdb_target=i386v ;;
i[345]86-*-sysv*) gdb_target=i386v ;;
i[345]86-*-linux*) gdb_target=linux ;;
i[345]86-*-isc*) gdb_target=i386v ;;
i[345]86-*-mach3*) gdb_target=i386m3 ;;
i[345]86-*-mach*) gdb_target=i386mach ;;
i[345]86-*-netware*) gdb_target=i386nw
configdirs="${configdirs} nlm" ;;
i[345]86-*-osf1mk*) gdb_target=i386mk ;;
i[345]86-*-win32) gdb_target=win32 ;;
i960-*-bout*) gdb_target=vxworks960 ;;
i960-*-coff*) gdb_target=nindy960 ;;
i960-*-elf*) gdb_target=nindy960 ;;
i960-*-nindy*) gdb_target=nindy960 ;;
i960-*-vxworks*) gdb_target=vxworks960 ;;
m68000-*-sunos3*) gdb_target=sun2os3 ;;
m68000-*-sunos4*) gdb_target=sun2os4 ;;
m68*-apollo*-bsd*) gdb_target=apollo68b ;;
m68*-bull-sysv*) gdb_target=dpx2 ;;
m68*-hp-bsd*) gdb_target=hp300bsd ;;
m68*-hp-hpux*) gdb_target=hp300hpux ;;
m68*-altos-*) gdb_target=altos ;;
m68*-att-*) gdb_target=3b1 ;;
m68*-cisco*-*) gdb_target=cisco ;;
m68*-ericsson-*) gdb_target=es1800 ;;
m68*-isi-*) gdb_target=isi ;;
m68*-motorola-*) gdb_target=delta68 ;;
m68*-netx-*) gdb_target=vxworks68 ;;
m68*-sony-*) gdb_target=news ;;
m68*-tandem-*) gdb_target=st2000 ;;
m68*-rom68k-*) gdb_target=monitor ;;
m68*-*bug-*) gdb_target=monitor ;;
m68*-monitor-*) gdb_target=monitor ;;
m68*-est-*) gdb_target=monitor ;;
m68*-*-aout*) gdb_target=monitor ;;
m68*-*-coff*) gdb_target=monitor ;;
m68*-*-elf*) gdb_target=monitor ;;
m68*-*-lynxos*) gdb_target=m68klynx
configdirs="${configdirs} gdbserver" ;;
m68*-*-os68k*) gdb_target=os68k ;;
m68*-*-sunos3*) gdb_target=sun3os3 ;;
m68*-*-sunos4*) gdb_target=sun3os4 ;;
m68*-*-sysv4*) gdb_target=m68kv4 ;;
m68*-*-vxworks*) gdb_target=vxworks68 ;;
m88*-harris-cxux*) gdb_target=cxux ;;
m88*-motorola-sysv4*) gdb_target=delta88v4 ;;
m88*-*-mach3*) gdb_target=mach3 ;;
m88*-motorola-*) gdb_target=delta88 ;;
m88*-*-*) gdb_target=m88k ;;
mips64*-big-*) gdb_target=bigmips64 ;;
mips*-big-*) gdb_target=bigmips ;;
mips*-dec-mach3*) gdb_target=mach3 ;;
mips*-dec-*) gdb_target=decstation ;;
mips64*el-*-ecoff*) gdb_target=idtl64 ;;
mips64*-idt-ecoff*) gdb_target=idt64 ;;
mips64*vr4300*el-*-elf*) gdb_target=vr4300el ;;
mips64*vr4300*-*-elf*) gdb_target=vr4300 ;;
mips64*el-*-elf*) gdb_target=idtl64 ;;
mips64*-*-elf*) gdb_target=idt64 ;;
mips*el-*-ecoff*) gdb_target=idtl ;;
mips*-*-ecoff*) gdb_target=idt ;;
# start-sanitize-gm
mips*-*-magic*) gdb_target=magic ;;
# end-sanitize-gm
mips*el-*-elf*) gdb_target=idtl ;;
mips*-*-elf*) gdb_target=idt ;;
mips*-little-*) gdb_target=littlemips ;;
mips*-sgi-irix5*) gdb_target=irix5 ;;
mips*-sgi-*) gdb_target=irix3 ;;
mips*-sony-*) gdb_target=bigmips ;;
mips*-*-mach3*) gdb_target=mach3 ;;
mips*-*-sysv4*) gdb_target=mipsv4 ;;
mips*-*-sysv*) gdb_target=bigmips ;;
mips*-*-riscos*) gdb_target=bigmips ;;
none-*-*) gdb_target=none ;;
np1-*-*) gdb_target=np1 ;;
ns32k-*-mach3*) gdb_target=mach3 ;;
ns32k-*-netbsd*) gdb_target=nbsd ;;
ns32k-utek-sysv*) gdb_target=merlin ;;
ns32k-utek-*) gdb_target=umax ;;
pn-*-*) gdb_target=pn ;;
powerpc-*-netware*) gdb_target=ppc-nw
configdirs="${configdirs} nlm" ;;
powerpc-*-aix4*) gdb_target=aix4 ;;
powerpc-*-aix*) gdb_target=aix ;;
powerpc-*-eabisim*) gdb_target=ppc-sim ;;
powerpc-*-eabi*) gdb_target=ppc-eabi ;;
powerpcle-*-eabisim*) gdb_target=ppcle-sim ;;
powerpcle-*-eabi*) gdb_target=ppcle-eabi ;;
pyramid-*-*) gdb_target=pyramid ;;
rs6000-*-lynxos*) gdb_target=rs6000lynx ;;
rs6000-*-aix4*) gdb_target=aix4 ;;
rs6000-*-*) gdb_target=rs6000 ;;
sparc-*-aout*) gdb_target=sparc-em ;;
sparc-*-coff*) gdb_target=sparc-em ;;
sparc-*-elf*) gdb_target=sparc-em ;;
sparc-*-lynxos*) gdb_target=sparclynx
configdirs="${configdirs} gdbserver" ;;
sparc-*-netbsd*) gdb_target=nbsd ;;
sparc-*-solaris2*) gdb_target=sun4sol2 ;;
sparc-*-sunos4*) gdb_target=sun4os4 ;;
sparc-*-sunos5*) gdb_target=sun4sol2 ;;
sparc-*-vxworks*) gdb_target=vxsparc ;;
sparc-*-*) gdb_target=sun4os4 ;;
sparclite*-*-*) gdb_target=sparclite ;;
sparc64-*-*) gdb_target=sp64 ;;
tahoe-*-*) gdb_target=tahoe ;;
vax-*-*) gdb_target=vax ;;
w65-*-*) gdb_target=w65 ;;
z8k-*-coff*) gdb_target=z8k ;;
esac
dnl
changequote([,])dnl
frags=
host_makefile_frag=${srcdir}/config/${gdb_host_cpu}/${gdb_host}.mh
if test ! -f ${host_makefile_frag}; then
AC_MSG_ERROR("*** Gdb does not support host ${host}")
fi
frags="$frags $host_makefile_frag"
target_makefile_frag=${srcdir}/config/${gdb_target_cpu}/${gdb_target}.mt
if test ! -f ${target_makefile_frag}; then
AC_MSG_ERROR("*** Gdb does not support target ${target}")
fi
frags="$frags $target_makefile_frag"
AC_SUBST_FILE(host_makefile_frag)
AC_SUBST_FILE(target_makefile_frag)
AC_SUBST(frags)
changequote(,)dnl
hostfile=`sed -n '
s/XM_FILE[ ]*=[ ]*\([^ ]*\)/\1/p
' ${host_makefile_frag}`
targetfile=`sed -n '
s/TM_FILE[ ]*=[ ]*\([^ ]*\)/\1/p
' ${target_makefile_frag}`
# these really aren't orthogonal true/false values of the same condition,
# but shells are slow enough that I like to reuse the test conditions
# whenever possible
if test "${target}" = "${host}"; then
nativefile=`sed -n '
s/NAT_FILE[ ]*=[ ]*\([^ ]*\)/\1/p
' ${host_makefile_frag}`
else
# GDBserver is only useful in a "native" enviroment
configdirs=`echo $configdirs | sed 's/gdbserver//'`
fi
changequote([,])
# If hostfile (XM_FILE) and/or targetfile (TM_FILE) and/or nativefile
# (NAT_FILE) is not set in config/*/*.m[ht] files, we don't make the
# corresponding links. But we have to remove the xm.h files and tm.h
# files anyway, e.g. when switching from "configure host" to
# "configure none".
files=
links=
rm -f xm.h
if test "${hostfile}" != ""; then
files="${files} config/${gdb_host_cpu}/${hostfile}"
links="${links} xm.h"
fi
rm -f tm.h
if test "${targetfile}" != ""; then
files="${files} config/${gdb_target_cpu}/${targetfile}"
links="${links} tm.h"
fi
rm -f nm.h
if test "${nativefile}" != ""; then
files="${files} config/${gdb_host_cpu}/${nativefile}"
links="${links} nm.h"
else
# A cross-only configuration.
files="${files} config/nm-empty.h"
links="${links} nm.h"
fi
# start-sanitize-gdbtk
# Make it possible to use the GUI without doing a full install
if test "${enable_gdbtk}" = "yes" -a ! -f gdbtk.tcl ; then
files="${files} gdbtk.tcl"
links="${links} gdbtk.tcl"
fi
# end-sanitize-gdbtk
AC_LINK_FILES($files, $links)
AC_CONFIG_SUBDIRS($configdirs)
AC_OUTPUT(Makefile,
[
dnl Autoconf doesn't provide a mechanism for modifying definitions
dnl provided by makefile fragments.
dnl
if test "${nativefile}" = ""; then
sed -e '/^NATDEPFILES= /s//# NATDEPFILES= /' \
< Makefile > Makefile.tem
mv -f Makefile.tem Makefile
fi
changequote(,)dnl
sed -e '/^TM_FILE[ ]*=/s,^TM_FILE[ ]*=[ ]*,&config/'"${gdb_target_cpu}"'/,
/^XM_FILE[ ]*=/s,^XM_FILE[ ]*=[ ]*,&config/'"${gdb_host_cpu}"'/,
/^NAT_FILE[ ]*=/s,^NAT_FILE[ ]*=[ ]*,&config/'"${gdb_host_cpu}"'/,' <Makefile >Makefile.tmp
mv -f Makefile.tmp Makefile
changequote([,])dnl
case ${srcdir} in
.)
;;
*)
grep "source ${srcdir}/.gdbinit" .gdbinit >/dev/null 2>/dev/null || \
echo "source ${srcdir}/.gdbinit" >> .gdbinit
esac
],
[
gdb_host_cpu=$gdb_host_cpu
gdb_target_cpu=$gdb_target_cpu
nativefile=$nativefile
])
exit 0