OpenE2K/binutils-gdb
12
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
ca39c2f4dd
binutils-gdb/gas/config/tc-i370.c
Alan Modra 992a06eea4 gas and ld pluralization fixes 
gas/
	* as.c (main): Properly pluralize messages.
	* frags.c (frag_grow): Likewise.
	* read.c (emit_expr_with_reloc, emit_expr_fix): Likewise.
	(parse_bitfield_cons): Likewise.
	* write.c (fixup_segment, compress_debug, write_contents): Likewise.
	(relax_segment): Likewise.
	* config/tc-arm.c (s_arm_elf_cons): Likewise.
	* config/tc-cr16.c (l_cons): Likewise.
	* config/tc-i370.c (i370_elf_cons): Likewise.
	* config/tc-m68k.c (m68k_elf_cons): Likewise.
	* config/tc-msp430.c (msp430_operands): Likewise.
	* config/tc-s390.c (s390_elf_cons, s390_literals): Likewise.
	* config/tc-mcore.c (md_apply_fix): Likewise.
	* config/tc-tic54x.c (md_assemble): Likewise.
	* config/tc-xtensa.c (xtensa_elf_cons): Likewise.
	(xg_expand_assembly_insn): Likewise.
	* config/xtensa-relax.c (build_transition): Likewise.
ld/
	* ldlang.c (lang_size_sections_1): Properly pluralize messages.
	(lang_check_section_addresses): Likewise.
2017-11-07 17:00:37 +10:30

2670 lines
76 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* tc-i370.c -- Assembler for the IBM 360/370/390 instruction set.
Loosely based on the ppc files by Linas Vepstas <linas@linas.org> 1998, 99
Copyright (C) 1994-2017 Free Software Foundation, Inc.
Written by Ian Lance Taylor, Cygnus Support.
This file is part of GAS, the GNU Assembler.
GAS is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3, or (at your option)
any later version.
GAS is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with GAS; see the file COPYING. If not, write to the Free
Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA
02110-1301, USA. */
/* This assembler implements a very hacked version of an elf-like thing
that gcc emits (when gcc is suitably hacked). To make it behave more
HLASM-like, try turning on the -M or --mri flag (as there are various
similarities between HLASM and the MRI assemblers, such as section
names, lack of leading . in pseudo-ops, DC and DS, etc. */
#include "as.h"
#include "safe-ctype.h"
#include "subsegs.h"
#include "struc-symbol.h"
#include "opcode/i370.h"
#ifdef OBJ_ELF
#include "elf/i370.h"
#endif
/* This is the assembler for the System/390 Architecture. */
/* Tell the main code what the endianness is. */
extern int target_big_endian;
/* Generic assembler global variables which must be defined by all
targets. */
#ifdef OBJ_ELF
/* This string holds the chars that always start a comment. If the
pre-processor is disabled, these aren't very useful. The macro
tc_comment_chars points to this. We use this, rather than the
usual comment_chars, so that we can switch for Solaris conventions. */
static const char i370_eabi_comment_chars[] = "#";
const char *i370_comment_chars = i370_eabi_comment_chars;
#else
const char comment_chars[] = "#";
#endif
/* Characters which start a comment at the beginning of a line. */
const char line_comment_chars[] = "#*";
/* Characters which may be used to separate multiple commands on a
single line. */
const char line_separator_chars[] = ";";
/* Characters which are used to indicate an exponent in a floating
point number. */
const char EXP_CHARS[] = "eE";
/* Characters which mean that a number is a floating point constant,
as in 0d1.0. */
const char FLT_CHARS[] = "dD";
void
md_show_usage (FILE *stream)
{
fprintf (stream, "\
S/370 options: (these have not yet been tested and may not work) \n\
-u ignored\n\
-mregnames Allow symbolic names for registers\n\
-mno-regnames Do not allow symbolic names for registers\n");
#ifdef OBJ_ELF
fprintf (stream, "\
-mrelocatable support for GCC's -mrelocatble option\n\
-mrelocatable-lib support for GCC's -mrelocatble-lib option\n\
-V print assembler version number\n");
#endif
}
/* Whether to use user friendly register names. */
#define TARGET_REG_NAMES_P TRUE
static bfd_boolean reg_names_p = TARGET_REG_NAMES_P;
/* Predefined register names if -mregnames
In general, there are lots of them, in an attempt to be compatible
with a number of assemblers. */
/* Structure to hold information about predefined registers. */
struct pd_reg
{
const char *name;
int value;
};
/* List of registers that are pre-defined:
Each general register has predefined names of the form:
1. r<reg_num> which has the value <reg_num>.
2. r.<reg_num> which has the value <reg_num>.
Each floating point register has predefined names of the form:
1. f<reg_num> which has the value <reg_num>.
2. f.<reg_num> which has the value <reg_num>.
There are only four floating point registers, and these are
commonly labelled 0,2,4 and 6. Thus, there is no f1, f3, etc.
There are individual registers as well:
rbase or r.base has the value 3 (base register)
rpgt or r.pgt has the value 4 (page origin table pointer)
rarg or r.arg has the value 11 (argument pointer)
rtca or r.tca has the value 12 (table of contents pointer)
rtoc or r.toc has the value 12 (table of contents pointer)
sp or r.sp has the value 13 (stack pointer)
dsa or r.dsa has the value 13 (stack pointer)
lr has the value 14 (link reg)
The table is sorted. Suitable for searching by a binary search. */
static const struct pd_reg pre_defined_registers[] =
{
{ "arg", 11 }, /* Argument Pointer. */
{ "base", 3 }, /* Base Reg. */
{ "f.0", 0 }, /* Floating point registers. */
{ "f.2", 2 },
{ "f.4", 4 },
{ "f.6", 6 },
{ "f0", 0 },
{ "f2", 2 },
{ "f4", 4 },
{ "f6", 6 },
{ "dsa",13 }, /* Stack pointer. */
{ "lr", 14 }, /* Link Register. */
{ "pgt", 4 }, /* Page Origin Table Pointer. */
{ "r.0", 0 }, /* General Purpose Registers. */
{ "r.1", 1 },
{ "r.10", 10 },
{ "r.11", 11 },
{ "r.12", 12 },
{ "r.13", 13 },
{ "r.14", 14 },
{ "r.15", 15 },
{ "r.2", 2 },
{ "r.3", 3 },
{ "r.4", 4 },
{ "r.5", 5 },
{ "r.6", 6 },
{ "r.7", 7 },
{ "r.8", 8 },
{ "r.9", 9 },
{ "r.arg", 11 }, /* Argument Pointer. */
{ "r.base", 3 }, /* Base Reg. */
{ "r.dsa", 13 }, /* Stack Pointer. */
{ "r.pgt", 4 }, /* Page Origin Table Pointer. */
{ "r.sp", 13 }, /* Stack Pointer. */
{ "r.tca", 12 }, /* Pointer to the table of contents. */
{ "r.toc", 12 }, /* Pointer to the table of contents. */
{ "r0", 0 }, /* More general purpose registers. */
{ "r1", 1 },
{ "r10", 10 },
{ "r11", 11 },
{ "r12", 12 },
{ "r13", 13 },
{ "r14", 14 },
{ "r15", 15 },
{ "r2", 2 },
{ "r3", 3 },
{ "r4", 4 },
{ "r5", 5 },
{ "r6", 6 },
{ "r7", 7 },
{ "r8", 8 },
{ "r9", 9 },
{ "rbase", 3 }, /* Base Reg. */
{ "rtca", 12 }, /* Pointer to the table of contents. */
{ "rtoc", 12 }, /* Pointer to the table of contents. */
{ "sp", 13 }, /* Stack Pointer. */
};
#define REG_NAME_CNT (sizeof (pre_defined_registers) / sizeof (struct pd_reg))
/* Given NAME, find the register number associated with that name, return
the integer value associated with the given name or -1 on failure. */
static int
reg_name_search (const struct pd_reg *regs,
int regcount,
const char *name)
{
int middle, low, high;
int cmp;
low = 0;
high = regcount - 1;
do
{
middle = (low + high) / 2;
cmp = strcasecmp (name, regs[middle].name);
if (cmp < 0)
high = middle - 1;
else if (cmp > 0)
low = middle + 1;
else
return regs[middle].value;
}
while (low <= high);
return -1;
}
/* Summary of register_name().
in: Input_line_pointer points to 1st char of operand.
out: An expressionS.
The operand may have been a register: in this case, X_op == O_register,
X_add_number is set to the register number, and truth is returned.
Input_line_pointer->(next non-blank) char after operand, or is in its
original state. */
static bfd_boolean
register_name (expressionS *expressionP)
{
int reg_number;
char *name;
char *start;
char c;
/* Find the spelling of the operand. */
start = name = input_line_pointer;
if (name[0] == '%' && ISALPHA (name[1]))
name = ++input_line_pointer;
else if (!reg_names_p)
return FALSE;
while (' ' == *name)
name = ++input_line_pointer;
/* If it's a number, treat it as a number. If it's alpha, look to
see if it's in the register table. */
if (!ISALPHA (name[0]))
reg_number = get_single_number ();
else
{
c = get_symbol_name (&name);
reg_number = reg_name_search (pre_defined_registers, REG_NAME_CNT, name);
/* Put back the delimiting char. */
(void) restore_line_pointer (c);
}
/* If numeric, make sure it's not out of bounds. */
if ((0 <= reg_number) && (16 >= reg_number))
{
expressionP->X_op = O_register;
expressionP->X_add_number = reg_number;
/* Make the rest nice. */
expressionP->X_add_symbol = NULL;
expressionP->X_op_symbol = NULL;
return TRUE;
}
/* Reset the line as if we had not done anything. */
input_line_pointer = start;
return FALSE;
}
/* Local variables. */
/* The type of processor we are assembling for. This is one or more
of the I370_OPCODE flags defined in opcode/i370.h. */
static int i370_cpu = 0;
/* The base register to use for opcode with optional operands.
We define two of these: "text" and "other". Normally, "text"
would get used in the .text section for branches, while "other"
gets used in the .data section for address constants.
The idea of a second base register in a different section
is foreign to the usual HLASM-style semantics; however, it
allows us to provide support for dynamically loaded libraries,
by allowing us to place address constants in a section other
than the text section. The "other" section need not be the
.data section, it can be any section that isn't the .text section.
Note that HLASM defines a multiple, concurrent .using semantic
that we do not: in calculating offsets, it uses either the most
recent .using directive, or the one with the smallest displacement.
This allows HLASM to support a quasi-block-scope-like behaviour.
Handy for people writing assembly by hand ... but not supported
by us. */
static int i370_using_text_regno = -1;
static int i370_using_other_regno = -1;
/* The base address for address literals. */
static expressionS i370_using_text_baseaddr;
static expressionS i370_using_other_baseaddr;
/* the "other" section, used only for syntax error detection. */
static segT i370_other_section = undefined_section;
/* Opcode hash table. */
static struct hash_control *i370_hash;
/* Macro hash table. */
static struct hash_control *i370_macro_hash;
#ifdef OBJ_ELF
/* What type of shared library support to use. */
static enum { SHLIB_NONE, SHLIB_PIC, SHILB_MRELOCATABLE } shlib = SHLIB_NONE;
#endif
/* Flags to set in the elf header. */
static flagword i370_flags = 0;
#ifndef WORKING_DOT_WORD
int md_short_jump_size = 4;
int md_long_jump_size = 4;
#endif
#ifdef OBJ_ELF
const char *md_shortopts = "l:um:K:VQ:";
#else
const char *md_shortopts = "um:";
#endif
struct option md_longopts[] =
{
{NULL, no_argument, NULL, 0}
};
size_t md_longopts_size = sizeof (md_longopts);
int
md_parse_option (int c, const char *arg)
{
switch (c)
{
case 'u':
/* -u means that any undefined symbols should be treated as
external, which is the default for gas anyhow. */
break;
#ifdef OBJ_ELF
case 'K':
/* Recognize -K PIC */
if (strcmp (arg, "PIC") == 0 || strcmp (arg, "pic") == 0)
{
shlib = SHLIB_PIC;
i370_flags |= EF_I370_RELOCATABLE_LIB;
}
else
return 0;
break;
#endif
case 'm':
/* -m360 mean to assemble for the ancient 360 architecture. */
if (strcmp (arg, "360") == 0 || strcmp (arg, "i360") == 0)
i370_cpu = I370_OPCODE_360;
/* -mxa means to assemble for the IBM 370 XA. */
else if (strcmp (arg, "xa") == 0)
i370_cpu = I370_OPCODE_370_XA;
/* -many means to assemble for any architecture (370/XA). */
else if (strcmp (arg, "any") == 0)
i370_cpu = I370_OPCODE_370;
else if (strcmp (arg, "regnames") == 0)
reg_names_p = TRUE;
else if (strcmp (arg, "no-regnames") == 0)
reg_names_p = FALSE;
#ifdef OBJ_ELF
/* -mrelocatable/-mrelocatable-lib -- warn about
initializations that require relocation. */
else if (strcmp (arg, "relocatable") == 0)
{
shlib = SHILB_MRELOCATABLE;
i370_flags |= EF_I370_RELOCATABLE;
}
else if (strcmp (arg, "relocatable-lib") == 0)
{
shlib = SHILB_MRELOCATABLE;
i370_flags |= EF_I370_RELOCATABLE_LIB;
}
#endif
else
{
as_bad (_("invalid switch -m%s"), arg);
return 0;
}
break;
#ifdef OBJ_ELF
/* -V: SVR4 argument to print version ID. */
case 'V':
print_version_id ();
break;
/* -Qy, -Qn: SVR4 arguments controlling whether a .comment section
should be emitted or not. FIXME: Not implemented. */
case 'Q':
break;
#endif
default:
return 0;
}
return 1;
}
/* Set i370_cpu if it is not already set.
Currently defaults to the reasonable superset;
but can be made more fine grained if desired. */
static void
i370_set_cpu (void)
{
const char *default_os = TARGET_OS;
const char *default_cpu = TARGET_CPU;
/* Override with the superset for the moment. */
i370_cpu = I370_OPCODE_ESA390_SUPERSET;
if (i370_cpu == 0)
{
if (strcmp (default_cpu, "i360") == 0)
i370_cpu = I370_OPCODE_360;
else if (strcmp (default_cpu, "i370") == 0)
i370_cpu = I370_OPCODE_370;
else if (strcmp (default_cpu, "XA") == 0)
i370_cpu = I370_OPCODE_370_XA;
else
as_fatal ("Unknown default cpu = %s, os = %s", default_cpu, default_os);
}
}
/* Figure out the BFD architecture to use.
FIXME: specify the different 370 architectures. */
enum bfd_architecture
i370_arch (void)
{
return bfd_arch_i370;
}
/* This function is called when the assembler starts up. It is called
after the options have been parsed and the output file has been
opened. */
void
md_begin (void)
{
const struct i370_opcode *op;
const struct i370_opcode *op_end;
const struct i370_macro *macro;
const struct i370_macro *macro_end;
bfd_boolean dup_insn = FALSE;
i370_set_cpu ();
#ifdef OBJ_ELF
/* Set the ELF flags if desired. */
if (i370_flags)
bfd_set_private_flags (stdoutput, i370_flags);
#endif
/* Insert the opcodes into a hash table. */
i370_hash = hash_new ();
op_end = i370_opcodes + i370_num_opcodes;
for (op = i370_opcodes; op < op_end; op++)
{
know ((op->opcode.i[0] & op->mask.i[0]) == op->opcode.i[0]
&& (op->opcode.i[1] & op->mask.i[1]) == op->opcode.i[1]);
if ((op->flags & i370_cpu) != 0)
{
const char *retval;
retval = hash_insert (i370_hash, op->name, (void *) op);
if (retval != (const char *) NULL)
{
as_bad (_("Internal assembler error for instruction %s"), op->name);
dup_insn = TRUE;
}
}
}
/* Insert the macros into a hash table. */
i370_macro_hash = hash_new ();
macro_end = i370_macros + i370_num_macros;
for (macro = i370_macros; macro < macro_end; macro++)
{
if ((macro->flags & i370_cpu) != 0)
{
const char *retval;
retval = hash_insert (i370_macro_hash, macro->name, (void *) macro);
if (retval != (const char *) NULL)
{
as_bad (_("Internal assembler error for macro %s"), macro->name);
dup_insn = TRUE;
}
}
}
if (dup_insn)
abort ();
}
/* Insert an operand value into an instruction. */
static i370_insn_t
i370_insert_operand (i370_insn_t insn,
const struct i370_operand *operand,
offsetT val)
{
if (operand->insert)
{
const char *errmsg;
/* Used for 48-bit insn's. */
errmsg = NULL;
insn = (*operand->insert) (insn, (long) val, &errmsg);
if (errmsg)
as_bad ("%s", errmsg);
}
else
/* This is used only for 16, 32 bit insn's. */
insn.i[0] |= (((long) val & ((1 << operand->bits) - 1))
<< operand->shift);
return insn;
}
#ifdef OBJ_ELF
/* Parse @got, etc. and return the desired relocation.
Currently, i370 does not support (don't really need to support) any
of these fancier markups ... for example, no one is going to
write 'L 6,=V(bogus)@got' it just doesn't make sense (at least to me).
So basically, we could get away with this routine returning
BFD_RELOC_UNUSED in all circumstances. However, I'll leave
in for now in case someone ambitious finds a good use for this stuff ...
this routine was pretty much just copied from the powerpc code ... */
static bfd_reloc_code_real_type
i370_elf_suffix (char **str_p, expressionS *exp_p)
{
struct map_bfd
{
const char *string;
int length;
bfd_reloc_code_real_type reloc;
};
char ident[20];
char *str = *str_p;
char *str2;
int ch;
int len;
struct map_bfd *ptr;
#define MAP(str,reloc) { str, sizeof (str) - 1, reloc }
static struct map_bfd mapping[] =
{
/* warnings with -mrelocatable. */
MAP ("fixup", BFD_RELOC_CTOR),
{ (char *)0, 0, BFD_RELOC_UNUSED }
};
if (*str++ != '@')
return BFD_RELOC_UNUSED;
for (ch = *str, str2 = ident;
(str2 < ident + sizeof (ident) - 1
&& (ISALNUM (ch) || ch == '@'));
ch = *++str)
*str2++ = TOLOWER (ch);
*str2 = '\0';
len = str2 - ident;
ch = ident[0];
for (ptr = &mapping[0]; ptr->length > 0; ptr++)
if (ch == ptr->string[0]
&& len == ptr->length
&& memcmp (ident, ptr->string, ptr->length) == 0)
{
if (exp_p->X_add_number != 0
&& (ptr->reloc == BFD_RELOC_16_GOTOFF
|| ptr->reloc == BFD_RELOC_LO16_GOTOFF
|| ptr->reloc == BFD_RELOC_HI16_GOTOFF
|| ptr->reloc == BFD_RELOC_HI16_S_GOTOFF))
as_warn (_("identifier+constant@got means identifier@got+constant"));
/* Now check for identifier@suffix+constant */
if (*str == '-' || *str == '+')
{
char *orig_line = input_line_pointer;
expressionS new_exp;
input_line_pointer = str;
expression (&new_exp);
if (new_exp.X_op == O_constant)
{
exp_p->X_add_number += new_exp.X_add_number;
str = input_line_pointer;
}
if (&input_line_pointer != str_p)
input_line_pointer = orig_line;
}
*str_p = str;
return ptr->reloc;
}
return BFD_RELOC_UNUSED;
}
/* Like normal .long/.short/.word, except support @got, etc.
Clobbers input_line_pointer, checks end-of-line. */
static void
i370_elf_cons (int nbytes) /* 1=.byte, 2=.word, 4=.long. */
{
expressionS exp;
bfd_reloc_code_real_type reloc;
if (is_it_end_of_statement ())
{
demand_empty_rest_of_line ();
return;
}
do
{
expression (&exp);
if (exp.X_op == O_symbol
&& *input_line_pointer == '@'
&& (reloc = i370_elf_suffix (&input_line_pointer, &exp)) != BFD_RELOC_UNUSED)
{
reloc_howto_type *reloc_howto = bfd_reloc_type_lookup (stdoutput, reloc);
int size = bfd_get_reloc_size (reloc_howto);
if (size > nbytes)
as_bad (ngettext ("%s relocations do not fit in %u byte",
"%s relocations do not fit in %u bytes",
nbytes),
reloc_howto->name, nbytes);
else
{
char *p = frag_more ((int) nbytes);
int offset = nbytes - size;
fix_new_exp (frag_now, p - frag_now->fr_literal + offset, size, &exp, 0, reloc);
}
}
else
emit_expr (&exp, (unsigned int) nbytes);
}
while (*input_line_pointer++ == ',');
input_line_pointer--; /* Put terminator back into stream. */
demand_empty_rest_of_line ();
}
/* ASCII to EBCDIC conversion table. */
static unsigned char ascebc[256] =
{
/*00 NL SH SX EX ET NQ AK BL */
0x00, 0x01, 0x02, 0x03, 0x37, 0x2D, 0x2E, 0x2F,
/*08 BS HT LF VT FF CR SO SI */
0x16, 0x05, 0x15, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
/*10 DL D1 D2 D3 D4 NK SN EB */
0x10, 0x11, 0x12, 0x13, 0x3C, 0x3D, 0x32, 0x26,
/*18 CN EM SB EC FS GS RS US */
0x18, 0x19, 0x3F, 0x27, 0x1C, 0x1D, 0x1E, 0x1F,
/*20 SP ! " # $ % & ' */
0x40, 0x5A, 0x7F, 0x7B, 0x5B, 0x6C, 0x50, 0x7D,
/*28 ( ) * + , - . / */
0x4D, 0x5D, 0x5C, 0x4E, 0x6B, 0x60, 0x4B, 0x61,
/*30 0 1 2 3 4 5 6 7 */
0xF0, 0xF1, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7,
/*38 8 9 : ; < = > ? */
0xF8, 0xF9, 0x7A, 0x5E, 0x4C, 0x7E, 0x6E, 0x6F,
/*40 @ A B C D E F G */
0x7C, 0xC1, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7,
/*48 H I J K L M N O */
0xC8, 0xC9, 0xD1, 0xD2, 0xD3, 0xD4, 0xD5, 0xD6,
/*50 P Q R S T U V W */
0xD7, 0xD8, 0xD9, 0xE2, 0xE3, 0xE4, 0xE5, 0xE6,
/*58 X Y Z [ \ ] ^ _ */
0xE7, 0xE8, 0xE9, 0xAD, 0xE0, 0xBD, 0x5F, 0x6D,
/*60 ` a b c d e f g */
0x79, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
/*68 h i j k l m n o */
0x88, 0x89, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96,
/*70 p q r s t u v w */
0x97, 0x98, 0x99, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6,
/*78 x y z { | } ~ DL */
0xA7, 0xA8, 0xA9, 0xC0, 0x4F, 0xD0, 0xA1, 0x07,
0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F,
0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F,
0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F,
0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F,
0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F,
0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F,
0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F,
0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F,
0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F,
0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F,
0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F,
0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F,
0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F,
0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F,
0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F,
0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0xFF
};
/* EBCDIC to ASCII conversion table. */
unsigned char ebcasc[256] =
{
/*00 NU SH SX EX PF HT LC DL */
0x00, 0x01, 0x02, 0x03, 0x00, 0x09, 0x00, 0x7F,
/*08 SM VT FF CR SO SI */
0x00, 0x00, 0x00, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
/*10 DE D1 D2 TM RS NL BS IL */
0x10, 0x11, 0x12, 0x13, 0x14, 0x0A, 0x08, 0x00,
/*18 CN EM CC C1 FS GS RS US */
0x18, 0x19, 0x00, 0x00, 0x1C, 0x1D, 0x1E, 0x1F,
/*20 DS SS FS BP LF EB EC */
0x00, 0x00, 0x00, 0x00, 0x00, 0x0A, 0x17, 0x1B,
/*28 SM C2 EQ AK BL */
0x00, 0x00, 0x00, 0x00, 0x05, 0x06, 0x07, 0x00,
/*30 SY PN RS UC ET */
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04,
/*38 C3 D4 NK SU */
0x00, 0x00, 0x00, 0x00, 0x14, 0x15, 0x00, 0x1A,
/*40 SP */
0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
/*48 . < ( + | */
0x00, 0x00, 0x00, 0x2E, 0x3C, 0x28, 0x2B, 0x7C,
/*50 & */
0x26, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
/*58 ! $ * ) ; ^ */
0x00, 0x00, 0x21, 0x24, 0x2A, 0x29, 0x3B, 0x5E,
/*60 - / */
0x2D, 0x2F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
/*68 , % _ > ? */
0x00, 0x00, 0x00, 0x2C, 0x25, 0x5F, 0x3E, 0x3F,
/*70 */
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
/*78 ` : # @ ' = " */
0x00, 0x60, 0x3A, 0x23, 0x40, 0x27, 0x3D, 0x22,
/*80 a b c d e f g */
0x00, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67,
/*88 h i { */
0x68, 0x69, 0x00, 0x7B, 0x00, 0x00, 0x00, 0x00,
/*90 j k l m n o p */
0x00, 0x6A, 0x6B, 0x6C, 0x6D, 0x6E, 0x6F, 0x70,
/*98 q r } */
0x71, 0x72, 0x00, 0x7D, 0x00, 0x00, 0x00, 0x00,
/*A0 ~ s t u v w x */
0x00, 0x7E, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78,
/*A8 y z [ */
0x79, 0x7A, 0x00, 0x00, 0x00, 0x5B, 0x00, 0x00,
/*B0 */
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
/*B8 ] */
0x00, 0x00, 0x00, 0x00, 0x00, 0x5D, 0x00, 0x00,
/*C0 { A B C D E F G */
0x7B, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47,
/*C8 H I */
0x48, 0x49, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
/*D0 } J K L M N O P */
0x7D, 0x4A, 0x4B, 0x4C, 0x4D, 0x4E, 0x4F, 0x50,
/*D8 Q R */
0x51, 0x52, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
/*E0 \ S T U V W X */
0x5C, 0x00, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58,
/*E8 Y Z */
0x59, 0x5A, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
/*F0 0 1 2 3 4 5 6 7 */
0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37,
/*F8 8 9 */
0x38, 0x39, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF
};
/* EBCDIC translation tables needed for 3270 support. */
static void
i370_ebcdic (int unused ATTRIBUTE_UNUSED)
{
char *p, *end;
char delim = 0;
size_t nbytes;
nbytes = strlen (input_line_pointer);
end = input_line_pointer + nbytes;
while ('\r' == *end) end --;
while ('\n' == *end) end --;
delim = *input_line_pointer;
if (('\'' == delim) || ('\"' == delim))
{
input_line_pointer ++;
end = rindex (input_line_pointer, delim);
}
if (end > input_line_pointer)
{
nbytes = end - input_line_pointer +1;
p = frag_more (nbytes);
while (end > input_line_pointer)
{
*p = ascebc [(unsigned char) (*input_line_pointer)];
++p; ++input_line_pointer;
}
*p = '\0';
}
if (delim == *input_line_pointer) ++input_line_pointer;
}
/* Stub out a couple of routines. */
static void
i370_rmode (int unused ATTRIBUTE_UNUSED)
{
as_tsktsk ("rmode ignored");
}
static void
i370_dsect (int sect)
{
char *save_line = input_line_pointer;
static char section[] = ".data\n";
/* Just pretend this is .section .data. */
input_line_pointer = section;
obj_elf_section (sect);
input_line_pointer = save_line;
}
static void
i370_csect (int unused ATTRIBUTE_UNUSED)
{
as_tsktsk ("csect not supported");
}
/* DC Define Const is only partially supported.
For sample code on what to do, look at i370_elf_cons() above.
This code handles pseudoops of the style
DC D'3.141592653' # in sysv4, .double 3.14159265
DC F'1' # in sysv4, .long 1. */
static void
i370_dc (int unused ATTRIBUTE_UNUSED)
{
char * p, tmp[50];
int nbytes=0;
expressionS exp;
char type=0;
char * clse;
if (is_it_end_of_statement ())
{
demand_empty_rest_of_line ();
return;
}
/* Figure out the size. */
type = *input_line_pointer++;
switch (type)
{
case 'H': /* 16-bit */
nbytes = 2;
break;
case 'E': /* 32-bit */
case 'F': /* 32-bit */
nbytes = 4;
break;
case 'D': /* 64-bit */
nbytes = 8;
break;
default:
as_bad (_("unsupported DC type"));
return;
}
/* Get rid of pesky quotes. */
if ('\'' == *input_line_pointer)
{
++input_line_pointer;
clse = strchr (input_line_pointer, '\'');
if (clse)
*clse= ' ';
else
as_bad (_("missing end-quote"));
}
if ('\"' == *input_line_pointer)
{
++input_line_pointer;
clse = strchr (input_line_pointer, '\"');
if (clse)
*clse= ' ';
else
as_bad (_("missing end-quote"));
}
switch (type)
{
case 'H': /* 16-bit */
case 'F': /* 32-bit */
expression (&exp);
emit_expr (&exp, nbytes);
break;
case 'E': /* 32-bit */
type = 'f';
/* Fall through. */
case 'D': /* 64-bit */
md_atof (type, tmp, &nbytes);
p = frag_more (nbytes);
memcpy (p, tmp, nbytes);
break;
default:
as_bad (_("unsupported DC type"));
return;
}
demand_empty_rest_of_line ();
}
/* Provide minimal support for DS Define Storage. */
static void
i370_ds (int unused ATTRIBUTE_UNUSED)
{
/* DS 0H or DS 0F or DS 0D. */
if ('0' == *input_line_pointer)
{
int alignment = 0; /* Left shift 1 << align. */
input_line_pointer ++;
switch (*input_line_pointer++)
{
case 'H': /* 16-bit */
alignment = 1;
break;
case 'F': /* 32-bit */
alignment = 2;
break;
case 'D': /* 64-bit */
alignment = 3;
break;
default:
as_bad (_("unsupported alignment"));
return;
}
frag_align (alignment, 0, 0);
record_alignment (now_seg, alignment);
}
else
as_bad (_("this DS form not yet supported"));
}
/* Solaris pseudo op to change to the .rodata section. */
static void
i370_elf_rdata (int sect)
{
char *save_line = input_line_pointer;
static char section[] = ".rodata\n";
/* Just pretend this is .section .rodata. */
input_line_pointer = section;
obj_elf_section (sect);
input_line_pointer = save_line;
}
/* Pseudo op to make file scope bss items. */
static void
i370_elf_lcomm (int unused ATTRIBUTE_UNUSED)
{
char *name;
char c;
char *p;
offsetT size;
symbolS *symbolP;
offsetT align;
segT old_sec;
int old_subsec;
char *pfrag;
int align2;
c = get_symbol_name (&name);
/* Just after name is now '\0'. */
p = input_line_pointer;
(void) restore_line_pointer (c);
SKIP_WHITESPACE ();
if (*input_line_pointer != ',')
{
as_bad (_("Expected comma after symbol-name: rest of line ignored."));
ignore_rest_of_line ();
return;
}
/* Skip ','. */
input_line_pointer++;
if ((size = get_absolute_expression ()) < 0)
{
as_warn (_(".COMMon length (%ld.) <0! Ignored."), (long) size);
ignore_rest_of_line ();
return;
}
/* The third argument to .lcomm is the alignment. */
if (*input_line_pointer != ',')
align = 8;
else
{
++input_line_pointer;
align = get_absolute_expression ();
if (align <= 0)
{
as_warn (_("ignoring bad alignment"));
align = 8;
}
}
*p = 0;
symbolP = symbol_find_or_make (name);
*p = c;
if (S_IS_DEFINED (symbolP) && ! S_IS_COMMON (symbolP))
{
as_bad (_("Ignoring attempt to re-define symbol `%s'."),
S_GET_NAME (symbolP));
ignore_rest_of_line ();
return;
}
if (S_GET_VALUE (symbolP) && S_GET_VALUE (symbolP) != (valueT) size)
{
as_bad (_("Length of .lcomm \"%s\" is already %ld. Not changed to %ld."),
S_GET_NAME (symbolP),
(long) S_GET_VALUE (symbolP),
(long) size);
ignore_rest_of_line ();
return;
}
/* Allocate_bss: */
old_sec = now_seg;
old_subsec = now_subseg;
if (align)
{
/* Convert to a power of 2 alignment. */
for (align2 = 0; (align & 1) == 0; align >>= 1, ++align2)
;
if (align != 1)
{
as_bad (_("Common alignment not a power of 2"));
ignore_rest_of_line ();
return;
}
}
else
align2 = 0;
record_alignment (bss_section, align2);
subseg_set (bss_section, 0);
if (align2)
frag_align (align2, 0, 0);
if (S_GET_SEGMENT (symbolP) == bss_section)
symbol_get_frag (symbolP)->fr_symbol = 0;
symbol_set_frag (symbolP, frag_now);
pfrag = frag_var (rs_org, 1, 1, (relax_substateT) 0, symbolP, size,
(char *) 0);
*pfrag = 0;
S_SET_SIZE (symbolP, size);
S_SET_SEGMENT (symbolP, bss_section);
subseg_set (old_sec, old_subsec);
demand_empty_rest_of_line ();
}
/* Validate any relocations emitted for -mrelocatable, possibly adding
fixups for word relocations in writable segments, so we can adjust
them at runtime. */
static void
i370_elf_validate_fix (fixS *fixp, segT seg)
{
if (fixp->fx_done || fixp->fx_pcrel)
return;
switch (shlib)
{
case SHLIB_NONE:
case SHLIB_PIC:
return;
case SHILB_MRELOCATABLE:
if (fixp->fx_r_type <= BFD_RELOC_UNUSED
&& fixp->fx_r_type != BFD_RELOC_16_GOTOFF
&& fixp->fx_r_type != BFD_RELOC_HI16_GOTOFF
&& fixp->fx_r_type != BFD_RELOC_LO16_GOTOFF
&& fixp->fx_r_type != BFD_RELOC_HI16_S_GOTOFF
&& fixp->fx_r_type != BFD_RELOC_32_BASEREL
&& fixp->fx_r_type != BFD_RELOC_LO16_BASEREL
&& fixp->fx_r_type != BFD_RELOC_HI16_BASEREL
&& fixp->fx_r_type != BFD_RELOC_HI16_S_BASEREL
&& strcmp (segment_name (seg), ".got2") != 0
&& strcmp (segment_name (seg), ".dtors") != 0
&& strcmp (segment_name (seg), ".ctors") != 0
&& strcmp (segment_name (seg), ".fixup") != 0
&& strcmp (segment_name (seg), ".stab") != 0
&& strcmp (segment_name (seg), ".gcc_except_table") != 0
&& strcmp (segment_name (seg), ".ex_shared") != 0)
{
if ((seg->flags & (SEC_READONLY | SEC_CODE)) != 0
|| fixp->fx_r_type != BFD_RELOC_CTOR)
as_bad_where (fixp->fx_file, fixp->fx_line,
"Relocation cannot be done when using -mrelocatable");
}
return;
default:
break;
}
}
#endif /* OBJ_ELF */
#define LITERAL_POOL_SUPPORT
#ifdef LITERAL_POOL_SUPPORT
/* Provide support for literal pools within the text section.
Loosely based on similar code from tc-arm.c.
We will use four symbols to locate four parts of the literal pool.
These four sections contain 64,32,16 and 8-bit constants; we use
four sections so that all memory access can be appropriately aligned.
That is, we want to avoid mixing these together so that we don't
waste space padding out to alignments. The four pointers
longlong_poolP, word_poolP, etc. point to a symbol labeling the
start of each pool part.
lit_pool_num increments from zero to infinity and uniquely id's
-- it's used to generate the *_poolP symbol name. */
#define MAX_LITERAL_POOL_SIZE 1024
typedef struct literalS
{
struct expressionS exp;
char * sym_name;
char size; /* 1,2,4 or 8 */
short offset;
} literalT;
literalT literals[MAX_LITERAL_POOL_SIZE];
int next_literal_pool_place = 0; /* Next free entry in the pool. */
static symbolS *longlong_poolP = NULL; /* 64-bit pool entries. */
static symbolS *word_poolP = NULL; /* 32-bit pool entries. */
static symbolS *short_poolP = NULL; /* 16-bit pool entries. */
static symbolS *byte_poolP = NULL; /* 8-bit pool entries. */
static int lit_pool_num = 1;
/* Create a new, empty symbol. */
static symbolS *
symbol_make_empty (void)
{
return symbol_create (FAKE_LABEL_NAME, undefined_section,
(valueT) 0, &zero_address_frag);
}
/* Make the first argument an address-relative expression
by subtracting the second argument. */
static void
i370_make_relative (expressionS *exx, expressionS *baseaddr)
{
if (O_constant == baseaddr->X_op)
{
exx->X_op = O_symbol;
exx->X_add_number -= baseaddr->X_add_number;
}
else if (O_symbol == baseaddr->X_op)
{
exx->X_op = O_subtract;
exx->X_op_symbol = baseaddr->X_add_symbol;
exx->X_add_number -= baseaddr->X_add_number;
}
else if (O_uminus == baseaddr->X_op)
{
exx->X_op = O_add;
exx->X_op_symbol = baseaddr->X_add_symbol;
exx->X_add_number += baseaddr->X_add_number;
}
else
as_bad (_("Missing or bad .using directive"));
}
/* Add an expression to the literal pool. */
static void
add_to_lit_pool (expressionS *exx, char *name, int sz)
{
int lit_count = 0;
int offset_in_pool = 0;
/* Start a new pool, if necessary. */
if (8 == sz && NULL == longlong_poolP)
longlong_poolP = symbol_make_empty ();
else if (4 == sz && NULL == word_poolP)
word_poolP = symbol_make_empty ();
else if (2 == sz && NULL == short_poolP)
short_poolP = symbol_make_empty ();
else if (1 == sz && NULL == byte_poolP)
byte_poolP = symbol_make_empty ();
/* Check if this literal value is already in the pool.
FIXME: We should probably be checking expressions
of type O_symbol as well.
FIXME: This is probably(certainly?) broken for O_big,
which includes 64-bit long-longs. */
while (lit_count < next_literal_pool_place)
{
if (exx->X_op == O_constant
&& literals[lit_count].exp.X_op == exx->X_op
&& literals[lit_count].exp.X_add_number == exx->X_add_number
&& literals[lit_count].exp.X_unsigned == exx->X_unsigned
&& literals[lit_count].size == sz)
break;
else if (literals[lit_count].sym_name
&& name
&& !strcmp (name, literals[lit_count].sym_name))
break;
if (sz == literals[lit_count].size)
offset_in_pool += sz;
lit_count ++;
}
if (lit_count == next_literal_pool_place) /* new entry */
{
if (next_literal_pool_place > MAX_LITERAL_POOL_SIZE)
as_bad (_("Literal Pool Overflow"));
literals[next_literal_pool_place].exp = *exx;
literals[next_literal_pool_place].size = sz;
literals[next_literal_pool_place].offset = offset_in_pool;
if (name)
literals[next_literal_pool_place].sym_name = strdup (name);
else
literals[next_literal_pool_place].sym_name = NULL;
next_literal_pool_place++;
}
/* ???_poolP points to the beginning of the literal pool.
X_add_number is the offset from the beginning of the
literal pool to this expr minus the location of the most
recent .using directive. Thus, the grand total value of the
expression is the distance from .using to the literal. */
if (8 == sz)
exx->X_add_symbol = longlong_poolP;
else if (4 == sz)
exx->X_add_symbol = word_poolP;
else if (2 == sz)
exx->X_add_symbol = short_poolP;
else if (1 == sz)
exx->X_add_symbol = byte_poolP;
exx->X_add_number = offset_in_pool;
exx->X_op_symbol = NULL;
/* If the user has set up a base reg in another section,
use that; otherwise use the text section. */
if (0 < i370_using_other_regno)
i370_make_relative (exx, &i370_using_other_baseaddr);
else
i370_make_relative (exx, &i370_using_text_baseaddr);
}
/* The symbol setup for the literal pool is done in two steps. First,
a symbol that represents the start of the literal pool is created,
above, in the add_to_pool() routine. This sym ???_poolP.
However, we don't know what fragment it's in until a bit later.
So we defer the frag_now thing, and the symbol name, until .ltorg time. */
/* Can't use symbol_new here, so have to create a symbol and then at
a later date assign it a value. That's what these functions do. */
static void
symbol_locate (symbolS *symbolP,
const char *name, /* It is copied, the caller can modify. */
segT segment, /* Segment identifier (SEG_<something>). */
valueT valu, /* Symbol value. */
fragS *frag) /* Associated fragment. */
{
size_t name_length;
char *preserved_copy_of_name;
name_length = strlen (name) + 1; /* +1 for \0 */
obstack_grow (&notes, name, name_length);
preserved_copy_of_name = obstack_finish (&notes);
S_SET_NAME (symbolP, preserved_copy_of_name);
S_SET_SEGMENT (symbolP, segment);
S_SET_VALUE (symbolP, valu);
symbol_clear_list_pointers (symbolP);
symbol_set_frag (symbolP, frag);
/* Link to end of symbol chain. */
{
extern int symbol_table_frozen;
if (symbol_table_frozen)
abort ();
}
symbol_append (symbolP, symbol_lastP, &symbol_rootP, &symbol_lastP);
obj_symbol_new_hook (symbolP);
#ifdef tc_symbol_new_hook
tc_symbol_new_hook (symbolP);
#endif
#define DEBUG_SYMS
#ifdef DEBUG_SYMS
verify_symbol_chain(symbol_rootP, symbol_lastP);
#endif /* DEBUG_SYMS */
}
/* i370_addr_offset() will convert operand expressions
that appear to be absolute into their base-register
relative form. These expressions come in two types:
(1) of the form "* + const" * where "*" means
relative offset since the last using
i.e. "*" means ".-using_baseaddr"
(2) labels, which are never absolute, but are always
relative to the last "using". Anything with an alpha
character is considered to be a label (since symbols
can never be operands), and since we've already handled
register operands. For example, "BL .L33" branch low
to .L33 RX form insn frequently terminates for-loops. */
static bfd_boolean
i370_addr_offset (expressionS *exx)
{
char *dot, *lab;
int islabel = 0;
int all_digits = 0;
/* Search for a label; anything with an alpha char will do.
Local labels consist of N digits followed by either b or f. */
lab = input_line_pointer;
while (*lab && (',' != *lab) && ('(' != *lab))
{
if (ISDIGIT (*lab))
all_digits = 1;
else if (ISALPHA (*lab))
{
if (!all_digits)
{
islabel = 1;
break;
}
else if (('f' == *lab) || ('b' == *lab))
{
islabel = 1;
break;
}
if (all_digits)
break;
}
else if ('.' != *lab)
break;
++lab;
}
/* See if operand has a * in it. */
dot = strchr (input_line_pointer, '*');
if (!dot && !islabel)
return FALSE;
/* Replace * with . and let expr munch on it. */
if (dot)
*dot = '.';
expression (exx);
/* OK, now we have to subtract the "using" location.
Normally branches appear in the text section only. */
if (0 == strncmp (now_seg->name, ".text", 5) || 0 > i370_using_other_regno)
i370_make_relative (exx, &i370_using_text_baseaddr);
else
i370_make_relative (exx, &i370_using_other_baseaddr);
/* Put the * back. */
if (dot)
*dot = '*';
return TRUE;
}
/* Handle address constants of various sorts. */
/* The currently supported types are
=A(some_symb)
=V(some_extern)
=X'deadbeef' hexadecimal
=F'1234' 32-bit const int
=H'1234' 16-bit const int. */
static bfd_boolean
i370_addr_cons (expressionS *exp)
{
char *name;
char *sym_name, delim;
int name_len;
int hex_len = 0;
int cons_len = 0;
name = input_line_pointer;
sym_name = input_line_pointer;
/* Find the spelling of the operand. */
if (name[0] == '=' && ISALPHA (name[1]))
name = ++input_line_pointer;
else
return FALSE;
switch (name[0])
{
case 'A': /* A == address-of. */
case 'V': /* V == extern. */
++input_line_pointer;
expression (exp);
/* We use a simple string name to collapse together
multiple references to the same address literal. */
name_len = strcspn (sym_name, ", ");
delim = *(sym_name + name_len);
*(sym_name + name_len) = 0x0;
add_to_lit_pool (exp, sym_name, 4);
*(sym_name + name_len) = delim;
break;
case 'H':
case 'F':
case 'X':
case 'E': /* Single-precision float point. */
case 'D': /* Double-precision float point. */
/* H == 16-bit fixed-point const; expression must be const. */
/* F == fixed-point const; expression must be const. */
/* X == fixed-point const; expression must be const. */
if ('H' == name[0]) cons_len = 2;
else if ('F' == name[0]) cons_len = 4;
else if ('X' == name[0]) cons_len = -1;
else if ('E' == name[0]) cons_len = 4;
else if ('D' == name[0]) cons_len = 8;
/* Extract length, if it is present;
FIXME: assume single-digit length. */
if ('L' == name[1])
{
/* Should work for ASCII and EBCDIC. */
cons_len = name[2] - '0';
input_line_pointer += 2;
}
++input_line_pointer;
/* Get rid of pesky quotes. */
if ('\'' == *input_line_pointer)
{
char * clse;
++input_line_pointer;
clse = strchr (input_line_pointer, '\'');
if (clse)
*clse= ' ';
else
as_bad (_("missing end-quote"));
}
if ('\"' == *input_line_pointer)
{
char * clse;
++input_line_pointer;
clse = strchr (input_line_pointer, '\"');
if (clse)
*clse= ' ';
else
as_bad (_("missing end-quote"));
}
if (('X' == name[0]) || ('E' == name[0]) || ('D' == name[0]))
{
char tmp[50];
char *save;
/* The length of hex constants is specified directly with L,
or implied through the number of hex digits. For example:
=X'AB' one byte
=X'abcd' two bytes
=X'000000AB' four bytes
=XL4'AB' four bytes, left-padded with zero. */
if (('X' == name[0]) && (0 > cons_len))
{
save = input_line_pointer;
while (*save)
{
if (ISXDIGIT (*save))
hex_len++;
save++;
}
cons_len = (hex_len+1) /2;
}
/* I believe this works even for =XL8'dada0000beeebaaa'
which should parse out to X_op == O_big
Note that floats and doubles get represented as
0d3.14159265358979 or 0f 2.7. */
tmp[0] = '0';
tmp[1] = name[0];
tmp[2] = 0;
strcat (tmp, input_line_pointer);
save = input_line_pointer;
input_line_pointer = tmp;
expression (exp);
input_line_pointer = save + (input_line_pointer-tmp-2);
/* Fix up lengths for floats and doubles. */
if (O_big == exp->X_op)
exp->X_add_number = cons_len / CHARS_PER_LITTLENUM;
}
else
expression (exp);
/* O_big occurs when more than 4 bytes worth gets parsed. */
if ((exp->X_op != O_constant) && (exp->X_op != O_big))
{
as_bad (_("expression not a constant"));
return FALSE;
}
add_to_lit_pool (exp, 0x0, cons_len);
break;
default:
as_bad (_("Unknown/unsupported address literal type"));
return FALSE;
}
return TRUE;
}
/* Dump the contents of the literal pool that we've accumulated so far.
This aligns the pool to the size of the largest literal in the pool. */
static void
i370_ltorg (int ignore ATTRIBUTE_UNUSED)
{
int litsize;
int lit_count = 0;
int biggest_literal_size = 0;
int biggest_align = 0;
char pool_name[20];
if (strncmp (now_seg->name, ".text", 5))
{
if (i370_other_section == undefined_section)
as_bad (_(".ltorg without prior .using in section %s"),
now_seg->name);
if (i370_other_section != now_seg)
as_bad (_(".ltorg in section %s paired to .using in section %s"),
now_seg->name, i370_other_section->name);
}
if (! longlong_poolP
&& ! word_poolP
&& ! short_poolP
&& ! byte_poolP)
/* Nothing to do. */
return;
/* Find largest literal .. 2 4 or 8. */
lit_count = 0;
while (lit_count < next_literal_pool_place)
{
if (biggest_literal_size < literals[lit_count].size)
biggest_literal_size = literals[lit_count].size;
lit_count ++;
}
if (1 == biggest_literal_size) biggest_align = 0;
else if (2 == biggest_literal_size) biggest_align = 1;
else if (4 == biggest_literal_size) biggest_align = 2;
else if (8 == biggest_literal_size) biggest_align = 3;
else as_bad (_("bad alignment of %d bytes in literal pool"), biggest_literal_size);
if (0 == biggest_align) biggest_align = 1;
/* Align pool for short, word, double word accesses. */
frag_align (biggest_align, 0, 0);
record_alignment (now_seg, biggest_align);
/* Note that the gas listing will print only the first five
entries in the pool .... wonder how to make it print more. */
/* Output largest literals first, then the smaller ones. */
for (litsize=8; litsize; litsize /=2)
{
symbolS *current_poolP = NULL;
switch (litsize)
{
case 8:
current_poolP = longlong_poolP; break;
case 4:
current_poolP = word_poolP; break;
case 2:
current_poolP = short_poolP; break;
case 1:
current_poolP = byte_poolP; break;
default:
as_bad (_("bad literal size\n"));
}
if (NULL == current_poolP)
continue;
sprintf (pool_name, ".LITP%01d%06d", litsize, lit_pool_num);
symbol_locate (current_poolP, pool_name, now_seg,
(valueT) frag_now_fix (), frag_now);
symbol_table_insert (current_poolP);
lit_count = 0;
while (lit_count < next_literal_pool_place)
{
if (litsize == literals[lit_count].size)
{
#define EMIT_ADDR_CONS_SYMBOLS
#ifdef EMIT_ADDR_CONS_SYMBOLS
/* Create a bogus symbol, add it to the pool ...
For the most part, I think this is a useless exercise,
except that having these symbol names in the objects
is vaguely useful for debugging. */
if (literals[lit_count].sym_name)
{
symbolS * symP = symbol_make_empty ();
symbol_locate (symP, literals[lit_count].sym_name, now_seg,
(valueT) frag_now_fix (), frag_now);
symbol_table_insert (symP);
}
#endif /* EMIT_ADDR_CONS_SYMBOLS */
emit_expr (&(literals[lit_count].exp), literals[lit_count].size);
}
lit_count ++;
}
}
next_literal_pool_place = 0;
longlong_poolP = NULL;
word_poolP = NULL;
short_poolP = NULL;
byte_poolP = NULL;
lit_pool_num++;
}
#endif /* LITERAL_POOL_SUPPORT */
/* Add support for the HLASM-like USING directive to indicate
the base register to use ... we don't support the full
hlasm semantics for this ... we merely pluck a base address
and a register number out. We print a warning if using is
called multiple times. I suppose we should check to see
if the regno is valid. */
static void
i370_using (int ignore ATTRIBUTE_UNUSED)
{
expressionS ex, baseaddr;
int iregno;
char *star;
/* If "*" appears in a using, it means "."
replace it with "." so that expr doesn't get confused. */
star = strchr (input_line_pointer, '*');
if (star)
*star = '.';
/* The first arg to using will usually be ".", but it can
be a more complex expression too. */
expression (&baseaddr);
if (star)
*star = '*';
if (O_constant != baseaddr.X_op
&& O_symbol != baseaddr.X_op
&& O_uminus != baseaddr.X_op)
as_bad (_(".using: base address expression illegal or too complex"));
if (*input_line_pointer != '\0') ++input_line_pointer;
/* The second arg to using had better be a register. */
register_name (&ex);
demand_empty_rest_of_line ();
iregno = ex.X_add_number;
if (0 == strncmp (now_seg->name, ".text", 5))
{
i370_using_text_baseaddr = baseaddr;
i370_using_text_regno = iregno;
}
else
{
i370_using_other_baseaddr = baseaddr;
i370_using_other_regno = iregno;
i370_other_section = now_seg;
}
}
static void
i370_drop (int ignore ATTRIBUTE_UNUSED)
{
expressionS ex;
int iregno;
register_name (&ex);
demand_empty_rest_of_line ();
iregno = ex.X_add_number;
if (0 == strncmp (now_seg->name, ".text", 5))
{
if (iregno != i370_using_text_regno)
as_bad (_("dropping register %d in section %s does not match using register %d"),
iregno, now_seg->name, i370_using_text_regno);
i370_using_text_regno = -1;
i370_using_text_baseaddr.X_op = O_absent;
}
else
{
if (iregno != i370_using_other_regno)
as_bad (_("dropping register %d in section %s does not match using register %d"),
iregno, now_seg->name, i370_using_other_regno);
if (i370_other_section != now_seg)
as_bad (_("dropping register %d in section %s previously used in section %s"),
iregno, now_seg->name, i370_other_section->name);
i370_using_other_regno = -1;
i370_using_other_baseaddr.X_op = O_absent;
i370_other_section = undefined_section;
}
}
/* We need to keep a list of fixups. We can't simply generate them as
we go, because that would require us to first create the frag, and
that would screw up references to ``.''. */
struct i370_fixup
{
expressionS exp;
int opindex;
bfd_reloc_code_real_type reloc;
};
#define MAX_INSN_FIXUPS 5
/* Handle a macro. Gather all the operands, transform them as
described by the macro, and call md_assemble recursively. All the
operands are separated by commas; we don't accept parentheses
around operands here. */
static void
i370_macro (char *str, const struct i370_macro *macro)
{
char *operands[10];
unsigned int count;
char *s;
unsigned int len;
const char *format;
int arg;
char *send;
char *complete;
/* Gather the users operands into the operands array. */
count = 0;
s = str;
while (1)
{
if (count >= sizeof operands / sizeof operands[0])
break;
operands[count++] = s;
s = strchr (s, ',');
if (s == (char *) NULL)
break;
*s++ = '\0';
}
if (count != macro->operands)
{
as_bad (_("wrong number of operands"));
return;
}
/* Work out how large the string must be (the size is unbounded
because it includes user input). */
len = 0;
format = macro->format;
while (*format != '\0')
{
if (*format != '%')
{
++len;
++format;
}
else
{
arg = strtol (format + 1, &send, 10);
know (send != format && arg >= 0 && (unsigned) arg < count);
len += strlen (operands[arg]);
format = send;
}
}
/* Put the string together. */
complete = s = XNEWVEC (char, len + 1);
format = macro->format;
while (*format != '\0')
{
if (*format != '%')
*s++ = *format++;
else
{
arg = strtol (format + 1, &send, 10);
strcpy (s, operands[arg]);
s += strlen (s);
format = send;
}
}
*s = '\0';
/* Assemble the constructed instruction. */
md_assemble (complete);
free (complete);
}
/* This routine is called for each instruction to be assembled. */
void
md_assemble (char *str)
{
char *s;
const struct i370_opcode *opcode;
i370_insn_t insn;
const unsigned char *opindex_ptr;
int have_optional_index, have_optional_basereg, have_optional_reg;
int skip_optional_index, skip_optional_basereg, skip_optional_reg;
int use_text=0, use_other=0;
int off_by_one;
struct i370_fixup fixups[MAX_INSN_FIXUPS];
int fc;
char *f;
int i;
#ifdef OBJ_ELF
bfd_reloc_code_real_type reloc;
#endif
/* Get the opcode. */
for (s = str; *s != '\0' && ! ISSPACE (*s); s++)
;
if (*s != '\0')
*s++ = '\0';
/* Look up the opcode in the hash table. */
opcode = (const struct i370_opcode *) hash_find (i370_hash, str);
if (opcode == (const struct i370_opcode *) NULL)
{
const struct i370_macro *macro;
gas_assert (i370_macro_hash);
macro = (const struct i370_macro *) hash_find (i370_macro_hash, str);
if (macro == (const struct i370_macro *) NULL)
as_bad (_("Unrecognized opcode: `%s'"), str);
else
i370_macro (s, macro);
return;
}
insn = opcode->opcode;
str = s;
while (ISSPACE (*str))
++str;
/* I370 operands are either expressions or address constants.
Many operand types are optional. The optional operands
are always surrounded by parens, and are used to denote the base
register ... e.g. "A R1, D2" or "A R1, D2(,B2) as opposed to
the fully-formed "A R1, D2(X2,B2)". Note also the = sign,
such as A R1,=A(i) where the address-of operator =A implies
use of both a base register, and a missing index register.
So, before we start seriously parsing the operands, we check
to see if we have an optional operand, and, if we do, we count
the number of commas to see which operand should be omitted. */
have_optional_index = have_optional_basereg = have_optional_reg = 0;
for (opindex_ptr = opcode->operands; *opindex_ptr != 0; opindex_ptr++)
{
const struct i370_operand *operand;
operand = &i370_operands[*opindex_ptr];
if ((operand->flags & I370_OPERAND_INDEX) != 0)
have_optional_index = 1;
if ((operand->flags & I370_OPERAND_BASE) != 0)
have_optional_basereg = 1;
if ((operand->flags & I370_OPERAND_OPTIONAL) != 0)
have_optional_reg = 1;
}
skip_optional_index = skip_optional_basereg = skip_optional_reg = 0;
if (have_optional_index || have_optional_basereg)
{
unsigned int opcount, nwanted;
/* There is an optional operand. Count the number of
commas and open-parens in the input line. */
if (*str == '\0')
opcount = 0;
else
{
opcount = 1;
s = str;
while ((s = strpbrk (s, ",(=")) != (char *) NULL)
{
++opcount;
++s;
if (',' == *s) ++s; /* avoid counting things like (, */
if ('=' == *s) { ++s; --opcount; }
}
}
/* If there are fewer operands in the line then are called
for by the instruction, we want to skip the optional
operand. */
nwanted = strlen ((char *) opcode->operands);
if (have_optional_index)
{
if (opcount < nwanted)
skip_optional_index = 1;
if (have_optional_basereg && ((opcount+1) < nwanted))
skip_optional_basereg = 1;
if (have_optional_reg && ((opcount+1) < nwanted))
skip_optional_reg = 1;
}
else
{
if (have_optional_basereg && (opcount < nwanted))
skip_optional_basereg = 1;
if (have_optional_reg && (opcount < nwanted))
skip_optional_reg = 1;
}
}
/* Perform some off-by-one hacks on the length field of certain instructions.
It's such a shame to have to do this, but the problem is that HLASM got
defined so that the lengths differ by one from the actual machine instructions.
this code should probably be moved to a special inter-operand routine.
Sigh. Affected instructions are Compare Logical, Move and Exclusive OR
hack alert -- aren't *all* SS instructions affected ?? */
off_by_one = 0;
if (0 == strcasecmp ("CLC", opcode->name)
|| 0 == strcasecmp ("ED", opcode->name)
|| 0 == strcasecmp ("EDMK", opcode->name)
|| 0 == strcasecmp ("MVC", opcode->name)
|| 0 == strcasecmp ("MVCIN", opcode->name)
|| 0 == strcasecmp ("MVN", opcode->name)
|| 0 == strcasecmp ("MVZ", opcode->name)
|| 0 == strcasecmp ("NC", opcode->name)
|| 0 == strcasecmp ("OC", opcode->name)
|| 0 == strcasecmp ("XC", opcode->name))
off_by_one = 1;
/* Gather the operands. */
fc = 0;
for (opindex_ptr = opcode->operands; *opindex_ptr != 0; opindex_ptr++)
{
const struct i370_operand *operand;
char *hold;
expressionS ex;
operand = &i370_operands[*opindex_ptr];
/* If this is an index operand, and we are skipping it,
just insert a zero. */
if (skip_optional_index &&
((operand->flags & I370_OPERAND_INDEX) != 0))
{
insn = i370_insert_operand (insn, operand, 0);
continue;
}
/* If this is the base operand, and we are skipping it,
just insert the current using basreg. */
if (skip_optional_basereg &&
((operand->flags & I370_OPERAND_BASE) != 0))
{
int basereg = -1;
if (use_text)
{
if (0 == strncmp (now_seg->name, ".text", 5)
|| 0 > i370_using_other_regno)
basereg = i370_using_text_regno;
else
basereg = i370_using_other_regno;
}
else if (use_other)
{
if (0 > i370_using_other_regno)
basereg = i370_using_text_regno;
else
basereg = i370_using_other_regno;
}
if (0 > basereg)
as_bad (_("not using any base register"));
insn = i370_insert_operand (insn, operand, basereg);
continue;
}
/* If this is an optional operand, and we are skipping it,
Use zero (since a non-zero value would denote a register) */
if (skip_optional_reg
&& ((operand->flags & I370_OPERAND_OPTIONAL) != 0))
{
insn = i370_insert_operand (insn, operand, 0);
continue;
}
/* Gather the operand. */
hold = input_line_pointer;
input_line_pointer = str;
/* Register names are only allowed where there are registers. */
if ((operand->flags & I370_OPERAND_GPR) != 0)
{
/* Quickie hack to get past things like (,r13). */
if (skip_optional_index && (',' == *input_line_pointer))
{
*input_line_pointer = ' ';
input_line_pointer ++;
}
if (! register_name (&ex))
as_bad (_("expecting a register for operand %d"),
(int) (opindex_ptr - opcode->operands + 1));
}
/* Check for an address constant expression. */
/* We will put PSW-relative addresses in the text section,
and address literals in the .data (or other) section. */
else if (i370_addr_cons (&ex))
use_other = 1;
else if (i370_addr_offset (&ex))
use_text = 1;
else expression (&ex);
str = input_line_pointer;
input_line_pointer = hold;
/* Perform some off-by-one hacks on the length field of certain instructions.
It's such a shame to have to do this, but the problem is that HLASM got
defined so that the programmer specifies a length that is one greater
than what the machine instruction wants. Sigh. */
if (off_by_one && (0 == strcasecmp ("SS L", operand->name)))
ex.X_add_number --;
if (ex.X_op == O_illegal)
as_bad (_("illegal operand"));
else if (ex.X_op == O_absent)
as_bad (_("missing operand"));
else if (ex.X_op == O_register)
insn = i370_insert_operand (insn, operand, ex.X_add_number);
else if (ex.X_op == O_constant)
{
#ifdef OBJ_ELF
/* Allow @HA, @L, @H on constants.
Well actually, no we don't; there really don't make sense
(at least not to me) for the i370. However, this code is
left here for any dubious future expansion reasons. */
char *orig_str = str;
if ((reloc = i370_elf_suffix (&str, &ex)) != BFD_RELOC_UNUSED)
switch (reloc)
{
default:
str = orig_str;
break;
case BFD_RELOC_LO16:
/* X_unsigned is the default, so if the user has done
something which cleared it, we always produce a
signed value. */
ex.X_add_number = (((ex.X_add_number & 0xffff)
^ 0x8000)
- 0x8000);
break;
case BFD_RELOC_HI16:
ex.X_add_number = (ex.X_add_number >> 16) & 0xffff;
break;
case BFD_RELOC_HI16_S:
ex.X_add_number = (((ex.X_add_number >> 16) & 0xffff)
+ ((ex.X_add_number >> 15) & 1));
break;
}
#endif
insn = i370_insert_operand (insn, operand, ex.X_add_number);
}
#ifdef OBJ_ELF
else if ((reloc = i370_elf_suffix (&str, &ex)) != BFD_RELOC_UNUSED)
{
as_tsktsk ("md_assemble(): suffixed relocations not supported\n");
/* We need to generate a fixup for this expression. */
if (fc >= MAX_INSN_FIXUPS)
as_fatal ("too many fixups");
fixups[fc].exp = ex;
fixups[fc].opindex = 0;
fixups[fc].reloc = reloc;
++fc;
}
#endif /* OBJ_ELF */
else
{
/* We need to generate a fixup for this expression. */
/* Typically, the expression will just be a symbol ...
printf ("insn %s needs fixup for %s \n",
opcode->name, ex.X_add_symbol->bsym->name); */
if (fc >= MAX_INSN_FIXUPS)
as_fatal ("too many fixups");
fixups[fc].exp = ex;
fixups[fc].opindex = *opindex_ptr;
fixups[fc].reloc = BFD_RELOC_UNUSED;
++fc;
}
/* Skip over delimiter (close paren, or comma). */
if ((')' == *str) && (',' == *(str+1)))
++str;
if (*str != '\0')
++str;
}
while (ISSPACE (*str))
++str;
if (*str != '\0')
as_bad (_("junk at end of line: `%s'"), str);
/* Write out the instruction. */
f = frag_more (opcode->len);
if (4 >= opcode->len)
md_number_to_chars (f, insn.i[0], opcode->len);
else
{
md_number_to_chars (f, insn.i[0], 4);
if (6 == opcode->len)
md_number_to_chars ((f + 4), ((insn.i[1])>>16), 2);
else
{
/* Not used --- don't have any 8 byte instructions. */
as_bad (_("Internal Error: bad instruction length"));
md_number_to_chars ((f + 4), insn.i[1], opcode->len -4);
}
}
/* Create any fixups. At this point we do not use a
bfd_reloc_code_real_type, but instead just use the
BFD_RELOC_UNUSED plus the operand index. This lets us easily
handle fixups for any operand type, although that is admittedly
not a very exciting feature. We pick a BFD reloc type in
md_apply_fix. */
for (i = 0; i < fc; i++)
{
const struct i370_operand *operand;
operand = &i370_operands[fixups[i].opindex];
if (fixups[i].reloc != BFD_RELOC_UNUSED)
{
reloc_howto_type *reloc_howto = bfd_reloc_type_lookup (stdoutput, fixups[i].reloc);
int size;
fixS *fixP;
if (!reloc_howto)
abort ();
size = bfd_get_reloc_size (reloc_howto);
if (size < 1 || size > 4)
abort ();
printf (" gwana do fixup %d \n", i);
fixP = fix_new_exp (frag_now, f - frag_now->fr_literal, size,
&fixups[i].exp, reloc_howto->pc_relative,
fixups[i].reloc);
/* Turn off complaints that the addend is too large for things like
foo+100000@ha. */
switch (fixups[i].reloc)
{
case BFD_RELOC_16_GOTOFF:
case BFD_RELOC_LO16:
case BFD_RELOC_HI16:
case BFD_RELOC_HI16_S:
fixP->fx_no_overflow = 1;
break;
default:
break;
}
}
else
{
fix_new_exp (frag_now, f - frag_now->fr_literal, opcode->len,
&fixups[i].exp,
(operand->flags & I370_OPERAND_RELATIVE) != 0,
((bfd_reloc_code_real_type)
(fixups[i].opindex + (int) BFD_RELOC_UNUSED)));
}
}
}
/* Pseudo-op handling. */
/* The .byte pseudo-op. This is similar to the normal .byte
pseudo-op, but it can also take a single ASCII string. */
static void
i370_byte (int ignore ATTRIBUTE_UNUSED)
{
if (*input_line_pointer != '\"')
{
cons (1);
return;
}
/* Gather characters. A real double quote is doubled. Unusual
characters are not permitted. */
++input_line_pointer;
while (1)
{
char c;
c = *input_line_pointer++;
if (c == '\"')
{
if (*input_line_pointer != '\"')
break;
++input_line_pointer;
}
FRAG_APPEND_1_CHAR (c);
}
demand_empty_rest_of_line ();
}
/* The .tc pseudo-op. This is used when generating XCOFF and ELF.
This takes two or more arguments.
When generating XCOFF output, the first argument is the name to
give to this location in the toc; this will be a symbol with class
TC. The rest of the arguments are 4 byte values to actually put at
this location in the TOC; often there is just one more argument, a
relocatable symbol reference.
When not generating XCOFF output, the arguments are the same, but
the first argument is simply ignored. */
static void
i370_tc (int ignore ATTRIBUTE_UNUSED)
{
/* Skip the TOC symbol name. */
while (is_part_of_name (*input_line_pointer)
|| *input_line_pointer == '['
|| *input_line_pointer == ']'
|| *input_line_pointer == '{'
|| *input_line_pointer == '}')
++input_line_pointer;
/* Align to a four byte boundary. */
frag_align (2, 0, 0);
record_alignment (now_seg, 2);
if (*input_line_pointer != ',')
demand_empty_rest_of_line ();
else
{
++input_line_pointer;
cons (4);
}
}
const char *
md_atof (int type, char *litp, int *sizep)
{
/* 360/370/390 have two float formats: an old, funky 360 single-precision
format, and the ieee format. Support only the ieee format. */
return ieee_md_atof (type, litp, sizep, TRUE);
}
/* Write a value out to the object file, using the appropriate
endianness. */
void
md_number_to_chars (char *buf, valueT val, int n)
{
number_to_chars_bigendian (buf, val, n);
}
/* Align a section (I don't know why this is machine dependent). */
valueT
md_section_align (asection *seg, valueT addr)
{
int align = bfd_get_section_alignment (stdoutput, seg);
return (addr + (1 << align) - 1) & -(1 << align);
}
/* We don't have any form of relaxing. */
int
md_estimate_size_before_relax (fragS *fragp ATTRIBUTE_UNUSED,
asection *seg ATTRIBUTE_UNUSED)
{
abort ();
return 0;
}
/* Convert a machine dependent frag. We never generate these. */
void
md_convert_frag (bfd *abfd ATTRIBUTE_UNUSED,
asection *sec ATTRIBUTE_UNUSED,
fragS *fragp ATTRIBUTE_UNUSED)
{
abort ();
}
/* We have no need to default values of symbols. */
symbolS *
md_undefined_symbol (char *name ATTRIBUTE_UNUSED)
{
return 0;
}
/* Functions concerning relocs. */
/* The location from which a PC relative jump should be calculated,
given a PC relative reloc. */
long
md_pcrel_from_section (fixS *fixp, segT sec ATTRIBUTE_UNUSED)
{
return fixp->fx_frag->fr_address + fixp->fx_where;
}
/* Apply a fixup to the object code. This is called for all the
fixups we generated by the call to fix_new_exp, above. In the call
above we used a reloc code which was the largest legal reloc code
plus the operand index. Here we undo that to recover the operand
index. At this point all symbol values should be fully resolved,
and we attempt to completely resolve the reloc. If we can not do
that, we determine the correct reloc code and put it back in the
fixup.
See gas/cgen.c for more sample code and explanations of what's
going on here. */
void
md_apply_fix (fixS *fixP, valueT * valP, segT seg)
{
valueT value = * valP;
if (fixP->fx_addsy != NULL)
{
#ifdef DEBUG
printf ("\nmd_apply_fix: symbol %s at 0x%x (%s:%d) val=0x%x addend=0x%x\n",
S_GET_NAME (fixP->fx_addsy),
fixP->fx_frag->fr_address + fixP->fx_where,
fixP->fx_file, fixP->fx_line,
S_GET_VALUE (fixP->fx_addsy), value);
#endif
}
else
fixP->fx_done = 1;
/* Apply fixups to operands. Note that there should be no relocations
for any operands, since no instruction ever takes an operand
that requires reloc. */
if ((int) fixP->fx_r_type >= (int) BFD_RELOC_UNUSED)
{
int opindex;
const struct i370_operand *operand;
char *where;
i370_insn_t insn;
opindex = (int) fixP->fx_r_type - (int) BFD_RELOC_UNUSED;
operand = &i370_operands[opindex];
#ifdef DEBUG
printf ("\nmd_apply_fix: fixup operand %s at 0x%x in %s:%d addend=0x%x\n",
operand->name,
fixP->fx_frag->fr_address + fixP->fx_where,
fixP->fx_file, fixP->fx_line,
value);
#endif
/* Fetch the instruction, insert the fully resolved operand
value, and stuff the instruction back again.
fisxp->fx_size is the length of the instruction. */
where = fixP->fx_frag->fr_literal + fixP->fx_where;
insn.i[0] = bfd_getb32 ((unsigned char *) where);
if (6 <= fixP->fx_size)
/* Deal with 48-bit insn's. */
insn.i[1] = bfd_getb32 (((unsigned char *) where)+4);
insn = i370_insert_operand (insn, operand, (offsetT) value);
bfd_putb32 ((bfd_vma) insn.i[0], (unsigned char *) where);
if (6 <= fixP->fx_size)
/* Deal with 48-bit insn's. */
bfd_putb32 ((bfd_vma) insn.i[1], (((unsigned char *) where)+4));
/* We are done, right? right !! */
fixP->fx_done = 1;
if (fixP->fx_done)
/* Nothing else to do here. */
return;
/* Determine a BFD reloc value based on the operand information.
We are only prepared to turn a few of the operands into
relocs. In fact, we support *zero* operand relocations ...
Why? Because we are not expecting the compiler to generate
any operands that need relocation. Due to the 12-bit nature of
i370 addressing, this would be unusual. */
{
const char *sfile;
unsigned int sline;
/* Use expr_symbol_where to see if this is an expression
symbol. */
if (expr_symbol_where (fixP->fx_addsy, &sfile, &sline))
as_bad_where (fixP->fx_file, fixP->fx_line,
"unresolved expression that must be resolved");
else
as_bad_where (fixP->fx_file, fixP->fx_line,
"unsupported relocation type");
fixP->fx_done = 1;
return;
}
}
else
{
/* We branch to here if the fixup is not to a symbol that
appears in an instruction operand, but is rather some
declared storage. */
#ifdef OBJ_ELF
i370_elf_validate_fix (fixP, seg);
#endif
#ifdef DEBUG
printf ("md_apply_fix: reloc case %d in segment %s %s:%d\n",
fixP->fx_r_type, segment_name (seg), fixP->fx_file, fixP->fx_line);
printf ("\tcurrent fixup value is 0x%x \n", value);
#endif
switch (fixP->fx_r_type)
{
case BFD_RELOC_32:
case BFD_RELOC_CTOR:
if (fixP->fx_pcrel)
fixP->fx_r_type = BFD_RELOC_32_PCREL;
/* Fall through. */
case BFD_RELOC_RVA:
case BFD_RELOC_32_PCREL:
case BFD_RELOC_32_BASEREL:
#ifdef DEBUG
printf ("\t32 bit relocation at 0x%x\n",
fixP->fx_frag->fr_address + fixP->fx_where);
#endif
md_number_to_chars (fixP->fx_frag->fr_literal + fixP->fx_where,
value, 4);
break;
case BFD_RELOC_LO16:
case BFD_RELOC_16:
if (fixP->fx_pcrel)
as_bad_where (fixP->fx_file, fixP->fx_line,
"cannot emit PC relative %s relocation%s%s",
bfd_get_reloc_code_name (fixP->fx_r_type),
fixP->fx_addsy != NULL ? " against " : "",
(fixP->fx_addsy != NULL
? S_GET_NAME (fixP->fx_addsy)
: ""));
md_number_to_chars (fixP->fx_frag->fr_literal + fixP->fx_where,
value, 2);
break;
/* This case happens when you write, for example,
lis %r3,(L1-L2)@ha
where L1 and L2 are defined later. */
case BFD_RELOC_HI16:
if (fixP->fx_pcrel)
abort ();
md_number_to_chars (fixP->fx_frag->fr_literal + fixP->fx_where,
value >> 16, 2);
break;
case BFD_RELOC_HI16_S:
if (fixP->fx_pcrel)
abort ();
md_number_to_chars (fixP->fx_frag->fr_literal + fixP->fx_where,
(value + 0x8000) >> 16, 2);
break;
case BFD_RELOC_8:
if (fixP->fx_pcrel)
abort ();
md_number_to_chars (fixP->fx_frag->fr_literal + fixP->fx_where,
value, 1);
break;
default:
fprintf (stderr,
"Gas failure, reloc value %d\n", fixP->fx_r_type);
fflush (stderr);
abort ();
}
}
fixP->fx_addnumber = value;
}
/* Generate a reloc for a fixup. */
arelent *
tc_gen_reloc (asection *seg ATTRIBUTE_UNUSED, fixS *fixp)
{
arelent *reloc;
reloc = XNEW (arelent);
reloc->sym_ptr_ptr = XNEW (asymbol *);
*reloc->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy);
reloc->address = fixp->fx_frag->fr_address + fixp->fx_where;
reloc->howto = bfd_reloc_type_lookup (stdoutput, fixp->fx_r_type);
if (reloc->howto == (reloc_howto_type *) NULL)
{
as_bad_where (fixp->fx_file, fixp->fx_line,
"reloc %d not supported by object file format", (int)fixp->fx_r_type);
return NULL;
}
reloc->addend = fixp->fx_addnumber;
#ifdef DEBUG
printf ("\ngen_reloc(): sym %s (%s:%d) at addr 0x%x addend=0x%x\n",
fixp->fx_addsy->bsym->name,
fixp->fx_file, fixp->fx_line,
reloc->address, reloc->addend);
#endif
return reloc;
}
/* The target specific pseudo-ops which we support. */
const pseudo_typeS md_pseudo_table[] =
{
/* Pseudo-ops which must be overridden. */
{ "byte", i370_byte, 0 },
{ "dc", i370_dc, 0 },
{ "ds", i370_ds, 0 },
{ "rmode", i370_rmode, 0 },
{ "csect", i370_csect, 0 },
{ "dsect", i370_dsect, 0 },
/* enable ebcdic strings e.g. for 3270 support */
{ "ebcdic", i370_ebcdic, 0 },
#ifdef OBJ_ELF
{ "long", i370_elf_cons, 4 },
{ "word", i370_elf_cons, 4 },
{ "short", i370_elf_cons, 2 },
{ "rdata", i370_elf_rdata, 0 },
{ "rodata", i370_elf_rdata, 0 },
{ "lcomm", i370_elf_lcomm, 0 },
#endif
/* This pseudo-op is used even when not generating XCOFF output. */
{ "tc", i370_tc, 0 },
/* dump the literal pool */
{ "ltorg", i370_ltorg, 0 },
/* support the hlasm-style USING directive */
{ "using", i370_using, 0 },
{ "drop", i370_drop, 0 },
{ NULL, NULL, 0 }
};
Reference in New Issue View Git Blame Copy Permalink