binutils-gdb/gdb/alpha-nat.c

279 lines
8.0 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* Low level Alpha interface, for GDB when running native.
Copyright 1993, 1995, 1996, 1998, 1999, 2000, 2001
Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
#include "defs.h"
#include "inferior.h"
#include "gdbcore.h"
#include "target.h"
#include "regcache.h"
#include "alpha-tdep.h"
#include <sys/ptrace.h>
#ifdef __linux__
#include <asm/reg.h>
#include <alpha/ptrace.h>
#else
#include <alpha/coreregs.h>
#endif
#include <sys/user.h>
/* Prototypes for local functions. */
static void fetch_osf_core_registers (char *, unsigned, int, CORE_ADDR);
static void fetch_elf_core_registers (char *, unsigned, int, CORE_ADDR);
/* Extract the register values out of the core file and store
them where `read_register' will find them.
CORE_REG_SECT points to the register values themselves, read into memory.
CORE_REG_SIZE is the size of that area.
WHICH says which set of registers we are handling (0 = int, 2 = float
on machines where they are discontiguous).
REG_ADDR is the offset from u.u_ar0 to the register values relative to
core_reg_sect. This is used with old-fashioned core files to
locate the registers in a large upage-plus-stack ".reg" section.
Original upage address X is at location core_reg_sect+x+reg_addr.
*/
static void
fetch_osf_core_registers (char *core_reg_sect, unsigned core_reg_size,
int which, CORE_ADDR reg_addr)
{
register int regno;
register int addr;
int bad_reg = -1;
/* Table to map a gdb regnum to an index in the core register
section. The floating point register values are garbage in
OSF/1.2 core files. OSF5 uses different names for the register
enum list, need to handle two cases. The actual values are the
same. */
static int core_reg_mapping[ALPHA_NUM_REGS] =
{
#ifdef NCF_REGS
#define EFL NCF_REGS
CF_V0, CF_T0, CF_T1, CF_T2, CF_T3, CF_T4, CF_T5, CF_T6,
CF_T7, CF_S0, CF_S1, CF_S2, CF_S3, CF_S4, CF_S5, CF_S6,
CF_A0, CF_A1, CF_A2, CF_A3, CF_A4, CF_A5, CF_T8, CF_T9,
CF_T10, CF_T11, CF_RA, CF_T12, CF_AT, CF_GP, CF_SP, -1,
EFL + 0, EFL + 1, EFL + 2, EFL + 3, EFL + 4, EFL + 5, EFL + 6, EFL + 7,
EFL + 8, EFL + 9, EFL + 10, EFL + 11, EFL + 12, EFL + 13, EFL + 14, EFL + 15,
EFL + 16, EFL + 17, EFL + 18, EFL + 19, EFL + 20, EFL + 21, EFL + 22, EFL + 23,
EFL + 24, EFL + 25, EFL + 26, EFL + 27, EFL + 28, EFL + 29, EFL + 30, EFL + 31,
CF_PC, -1
#else
#define EFL (EF_SIZE / 8)
EF_V0, EF_T0, EF_T1, EF_T2, EF_T3, EF_T4, EF_T5, EF_T6,
EF_T7, EF_S0, EF_S1, EF_S2, EF_S3, EF_S4, EF_S5, EF_S6,
EF_A0, EF_A1, EF_A2, EF_A3, EF_A4, EF_A5, EF_T8, EF_T9,
EF_T10, EF_T11, EF_RA, EF_T12, EF_AT, EF_GP, EF_SP, -1,
EFL + 0, EFL + 1, EFL + 2, EFL + 3, EFL + 4, EFL + 5, EFL + 6, EFL + 7,
EFL + 8, EFL + 9, EFL + 10, EFL + 11, EFL + 12, EFL + 13, EFL + 14, EFL + 15,
EFL + 16, EFL + 17, EFL + 18, EFL + 19, EFL + 20, EFL + 21, EFL + 22, EFL + 23,
EFL + 24, EFL + 25, EFL + 26, EFL + 27, EFL + 28, EFL + 29, EFL + 30, EFL + 31,
EF_PC, -1
#endif
};
static char zerobuf[ALPHA_MAX_REGISTER_RAW_SIZE] =
{0};
for (regno = 0; regno < NUM_REGS; regno++)
{
if (CANNOT_FETCH_REGISTER (regno))
{
supply_register (regno, zerobuf);
continue;
}
addr = 8 * core_reg_mapping[regno];
if (addr < 0 || addr >= core_reg_size)
{
if (bad_reg < 0)
bad_reg = regno;
}
else
{
supply_register (regno, core_reg_sect + addr);
}
}
if (bad_reg >= 0)
{
error ("Register %s not found in core file.", REGISTER_NAME (bad_reg));
}
}
static void
fetch_elf_core_registers (char *core_reg_sect, unsigned core_reg_size,
int which, CORE_ADDR reg_addr)
{
if (core_reg_size < 32 * 8)
{
error ("Core file register section too small (%u bytes).", core_reg_size);
return;
}
if (which == 2)
{
/* The FPU Registers. */
memcpy (&registers[REGISTER_BYTE (FP0_REGNUM)], core_reg_sect, 31 * 8);
memset (&registers[REGISTER_BYTE (FP0_REGNUM + 31)], 0, 8);
memset (&register_valid[FP0_REGNUM], 1, 32);
}
else
{
/* The General Registers. */
memcpy (&registers[REGISTER_BYTE (ALPHA_V0_REGNUM)], core_reg_sect,
31 * 8);
memcpy (&registers[REGISTER_BYTE (PC_REGNUM)], core_reg_sect + 31 * 8, 8);
memset (&registers[REGISTER_BYTE (ALPHA_ZERO_REGNUM)], 0, 8);
memset (&register_valid[ALPHA_V0_REGNUM], 1, 32);
register_valid[PC_REGNUM] = 1;
}
}
/* Map gdb internal register number to a ptrace ``address''.
These ``addresses'' are defined in <sys/ptrace.h> */
#define REGISTER_PTRACE_ADDR(regno) \
(regno < FP0_REGNUM ? GPR_BASE + (regno) \
: regno == PC_REGNUM ? PC \
: regno >= FP0_REGNUM ? FPR_BASE + ((regno) - FP0_REGNUM) \
: 0)
/* Return the ptrace ``address'' of register REGNO. */
CORE_ADDR
register_addr (int regno, CORE_ADDR blockend)
{
return REGISTER_PTRACE_ADDR (regno);
}
int
kernel_u_size (void)
{
return (sizeof (struct user));
}
#if defined(USE_PROC_FS) || defined(HAVE_GREGSET_T)
#include <sys/procfs.h>
/* Prototypes for supply_gregset etc. */
#include "gregset.h"
/*
* See the comment in m68k-tdep.c regarding the utility of these functions.
*/
void
supply_gregset (gdb_gregset_t *gregsetp)
{
register int regi;
register long *regp = ALPHA_REGSET_BASE (gregsetp);
static char zerobuf[ALPHA_MAX_REGISTER_RAW_SIZE] =
{0};
for (regi = 0; regi < 31; regi++)
supply_register (regi, (char *) (regp + regi));
supply_register (PC_REGNUM, (char *) (regp + 31));
/* Fill inaccessible registers with zero. */
supply_register (ALPHA_ZERO_REGNUM, zerobuf);
supply_register (FP_REGNUM, zerobuf);
}
void
fill_gregset (gdb_gregset_t *gregsetp, int regno)
{
int regi;
register long *regp = ALPHA_REGSET_BASE (gregsetp);
for (regi = 0; regi < 31; regi++)
if ((regno == -1) || (regno == regi))
*(regp + regi) = *(long *) &registers[REGISTER_BYTE (regi)];
if ((regno == -1) || (regno == PC_REGNUM))
*(regp + 31) = *(long *) &registers[REGISTER_BYTE (PC_REGNUM)];
}
/*
* Now we do the same thing for floating-point registers.
* Again, see the comments in m68k-tdep.c.
*/
void
supply_fpregset (gdb_fpregset_t *fpregsetp)
{
register int regi;
register long *regp = ALPHA_REGSET_BASE (fpregsetp);
for (regi = 0; regi < 32; regi++)
supply_register (regi + FP0_REGNUM, (char *) (regp + regi));
}
void
fill_fpregset (gdb_fpregset_t *fpregsetp, int regno)
{
int regi;
register long *regp = ALPHA_REGSET_BASE (fpregsetp);
for (regi = FP0_REGNUM; regi < FP0_REGNUM + 32; regi++)
{
if ((regno == -1) || (regno == regi))
{
*(regp + regi - FP0_REGNUM) =
*(long *) &registers[REGISTER_BYTE (regi)];
}
}
}
#endif
/* Register that we are able to handle alpha core file formats. */
static struct core_fns alpha_osf_core_fns =
{
/* This really is bfd_target_unknown_flavour. */
bfd_target_unknown_flavour, /* core_flavour */
default_check_format, /* check_format */
default_core_sniffer, /* core_sniffer */
fetch_osf_core_registers, /* core_read_registers */
NULL /* next */
};
static struct core_fns alpha_elf_core_fns =
{
bfd_target_elf_flavour, /* core_flavour */
default_check_format, /* check_format */
default_core_sniffer, /* core_sniffer */
fetch_elf_core_registers, /* core_read_registers */
NULL /* next */
};
void
_initialize_core_alpha (void)
{
add_core_fns (&alpha_osf_core_fns);
add_core_fns (&alpha_elf_core_fns);
}