d0f54f9d42
Committed by Jim Blandy <jimb@redhat.com>. * config/s390/nm-linux.h: Update comments. Do not include "solib.h". (KERNEL_U_ADDR, REGISTER_U_ADDR, U_REGS_OFFSET): Remove. (FETCH_INFERIOR_REGISTERS): Define. * config/s390/s390.mh (NATDEPFILES): Remove core-aout.o and core-regset.o. * config/s390/s390x.mt: Remove. * config/s390/tm-s390.h: Remove. * config/s390/tm-linux.h: Do not include "s390/tm-s390.h". (TARGET_ELF64): Remove. (SKIP_TRAMPOLINE_CODE): Do not undefine. * configure.tgt [s390-*-*, s390x-*-*]: Merge into single s390*-*-* case; always set gdb_target to s390. * regformats/reg-s390.dat: Remove control registers. * regformats/reg-s390x.dat: Likewise. * s390-tdep.h: New file. * s390-nat.c: Do not include <asm/processor.h> or <value.h>. Include "inferior.h" and "s390-tdep.h". Remove private definition of offsetof. (s390_register_u_addr): Remove. (regmap_gregset, regmap_fpregset): Define. (supply_gregset, fill_gregset): Reimplement. (supply_fpregset, fill_fpregset): Likewise. (s390_inferior_tid): New function. (fetch_regs, store_regs, fetch_fpregs, store_fpregs): Likewise. (fetch_inferior_registers, store_inferior_registers): Likewise. * s390-tdep.c: Do not define S390_TDEP. Include "defs.h" instead of <defs.h>. Include "reggroups.h", "regset.h", and "s390-tdep.h". Global replace of S390_GP0_REGNUM by S390_R0_REGNUM. Global replace of S390_FP0_REGNUM by S390_F0_REGNUM. (struct gdbarch_tdep): Define. (struct s390_register_info): Define. (s390_register_info): New variable. (s390_register_name): Reimplement. (s390_register_type): New function. (s390_register_raw_size, s390x_register_raw_size): Remove. (s390_cannot_fetch_register): Remove. (s390_register_byte): Remove. (s390_register_virtual_type, s390x_register_virtual_type): Remove. (s390_dwarf_regmap): New variable. (s390_dwarf_reg_to_regnum): New function. (s390_stab_reg_to_regnum): Remove. (s390_pseudo_register_read, s390_pseudo_register_write): New functions. (s390x_pseudo_register_read, s390x_pseudo_register_write): Likewise. (s390_convert_register_p): Likewise. (s390_register_to_value, s390_value_to_register): Likewise. (s390_register_reggroup_p): Likewise. (s390_regmap_gregset, s390x_regmap_gregset, s390_regmap_fpregset, s390_gregset, s390x_gregset, s390_fpregset): New variables. (s390_supply_regset, s390_regset_from_core_section): New functions. (GDB_TARGET_IS_ESAME): Move here from tm-s390.h. (S390_FPR_SIZE): Likewise. (S390_GPR_SIZE): Likewise. Redefine in terms of GDB_TARGET_IS_ESAME. Global replace of DEPRECATED_REGISTER_SIZE by S390_GPR_SIZE. (S390_NUM_GPRS): Move here from tm-s390.h. (S390_NUM_FPRS): Likewise. (s390_in_function_epilogue_p): New function. (s390_is_sigreturn): Replace S390_PSW_ADDR_SIZE by S390_GPR_SIZE. Replace S390_PC_REGNUM by S390_PSWA_REGNUM. (s390_gdbarch_init): Allocate and set up gdbarch_tdep structure. Replace s390_stab_reg_to_regnum by s390_dwarf_reg_to_regnum. Replace S390_FP_REGNUM by S390_SP_REGNUM. Remove calls to: set_gdbarch_deprecated_max_register_raw_size, set_gdbarch_deprecated_max_register_virtual_size, set_gdbarch_deprecated_register_byte, set_gdbarch_cannot_fetch_register, set_gdbarch_cannot_store_register, set_gdbarch_deprecated_register_size, set_gdbarch_deprecated_register_raw_size, set_gdbarch_deprecated_register_virtual_size, set_gdbarch_deprecated_register_virtual_type, set_gdbarch_deprecated_register_bytes. Add calls to: set_gdbarch_num_pseudo_regs, set_gdbarch_register_type, set_gdbarch_convert_register_p, set_gdbarch_register_to_value, set_gdbarch_value_to_register, set_gdbarch_register_reggroup_p, set_gdbarch_regset_from_core_section, set_gdbarch_pseudo_register_read, set_gdbarch_pseudo_register_write, set_gdbarch_in_function_epilogue_p. * Makefile.in (s390-nat.o, s390-tdep.o): Update dependencies. (s390_tdep_h): New variable. |
||
---|---|---|
bfd | ||
binutils | ||
config | ||
contrib | ||
cpu | ||
etc | ||
gas | ||
gdb | ||
gprof | ||
include | ||
intl | ||
ld | ||
libiberty | ||
mmalloc | ||
opcodes | ||
readline | ||
sim | ||
texinfo | ||
.cvsignore | ||
COPYING | ||
COPYING.LIB | ||
COPYING.LIBGLOSS | ||
COPYING.NEWLIB | ||
ChangeLog | ||
MAINTAINERS | ||
Makefile.def | ||
Makefile.in | ||
Makefile.tpl | ||
README | ||
README-maintainer-mode | ||
config-ml.in | ||
config.guess | ||
config.if | ||
config.sub | ||
configure | ||
configure.in | ||
djunpack.bat | ||
gettext.m4 | ||
install-sh | ||
libtool.m4 | ||
ltcf-c.sh | ||
ltcf-cxx.sh | ||
ltcf-gcj.sh | ||
ltconfig | ||
ltmain.sh | ||
makefile.vms | ||
missing | ||
mkdep | ||
mkinstalldirs | ||
move-if-change | ||
mpw-README | ||
mpw-build.in | ||
mpw-config.in | ||
mpw-configure | ||
mpw-install | ||
setup.com | ||
src-release | ||
symlink-tree | ||
ylwrap |
README
README for GNU development tools This directory contains various GNU compilers, assemblers, linkers, debuggers, etc., plus their support routines, definitions, and documentation. If you are receiving this as part of a GDB release, see the file gdb/README. If with a binutils release, see binutils/README; if with a libg++ release, see libg++/README, etc. That'll give you info about this package -- supported targets, how to use it, how to report bugs, etc. It is now possible to automatically configure and build a variety of tools with one command. To build all of the tools contained herein, run the ``configure'' script here, e.g.: ./configure make To install them (by default in /usr/local/bin, /usr/local/lib, etc), then do: make install (If the configure script can't determine your type of computer, give it the name as an argument, for instance ``./configure sun4''. You can use the script ``config.sub'' to test whether a name is recognized; if it is, config.sub translates it to a triplet specifying CPU, vendor, and OS.) If you have more than one compiler on your system, it is often best to explicitly set CC in the environment before running configure, and to also set CC when running make. For example (assuming sh/bash/ksh): CC=gcc ./configure make A similar example using csh: setenv CC gcc ./configure make Much of the code and documentation enclosed is copyright by the Free Software Foundation, Inc. See the file COPYING or COPYING.LIB in the various directories, for a description of the GNU General Public License terms under which you can copy the files. REPORTING BUGS: Again, see gdb/README, binutils/README, etc., for info on where and how to report problems.