binutils-gdb/gdb/testsuite/gdb.cp/annota3.exp

201 lines
5.5 KiB
Plaintext

# Copyright 2003-2014 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# This file was written by Elena Zannoni (ezannoni@cygnus.com)
#
# test running programs
#
if { [skip_cplus_tests] } { continue }
standard_testfile .cc
if {[prepare_for_testing $testfile.exp $testfile $srcfile \
{debug c++ nowarnings}]} {
return -1
}
# are we on a target board? If so, don't run these tests.
# note: this is necessary because we cannot use runto_main (which would
# work for remote targets too) because of the different prompt we get
# when using annotation level 2.
#
if [is_remote target] then {
return 0
}
#
# line number where we need to stop in main
#
set main_line 25
# The commands we test here produce many lines of output; disable "press
# <return> to continue" prompts.
gdb_test_no_output "set height 0"
#
# break at main
#
gdb_test "break 25" \
"Breakpoint.*at.* file .*$srcfile, line.*" \
"breakpoint main"
#
# NOTE: this prompt is OK only when the annotation level is > 1
# NOTE: When this prompt is in use the gdb_test procedure cannot be used because
# it assumes that the last char of the gdb_prompt is a white space. This is not
# true with this annotated prompt. So we must use send_gdb and gdb_expect.
#
set old_gdb_prompt $gdb_prompt
set gdb_prompt "\r\n\032\032pre-prompt\r\n$gdb_prompt \r\n\032\032prompt\r\n"
send_gdb "set annotate 3\n"
gdb_expect_list "annotation set at level 3" "\r\n$gdb_prompt$" {
"set annotate 3"
}
send_gdb "run\n"
gdb_expect_list "first run until main breakpoint" "$gdb_prompt$" {
"\r\n\032\032post-prompt\r\n"
"Starting program: .*annota3 \r\n"
"\r\n\032\032starting\r\n"
"\r\n\032\032breakpoint 1\r\n"
"\r\n"
"Breakpoint 1, "
"\r\n\032\032frame-begin 0 0x\[0-9a-z\]+\r\n"
"main \\(\\) at .*annota3.cc:25\r\n"
"\r\n\032\032source.*annota3.cc:25:.*:beg:0x\[0-9a-z\]+\r\n"
"\r\n\032\032stopped\r\n"
}
#
# print class 'a' with public fields.
#
send_gdb "print a\n"
gdb_expect_list "print class" "$gdb_prompt$" {
"\r\n\032\032post-prompt\r\n"
".*= \\{x = 1, y = 2\\}\r\n"
}
#
# continue until exit
# this will test:
# annotate-exited
#
send_gdb "continue\n"
gdb_expect_list "continue to exit" "$gdb_prompt$" [concat {
"\r\n\032\032post-prompt\r\n"
"Continuing.\r\n"
"\r\n\032\032starting\r\n"
"a.x is 1\r\n"
"\r\n\032\032exited 0\r\n"} [list "$inferior_exited_re normally.\r\n"] {
"\r\n\032\032stopped\r\n"
}]
#
# delete all breakpoints
#
send_gdb "delete\n"
gdb_expect {
-re ".*Delete all breakpoints. \\(y or n\\) \r\n\032\032query.*$" {
send_gdb "y\n"
gdb_expect {
-re "\r\n\032\032post-query\r\n$gdb_prompt$" { pass "delete bps" }
-re ".*$gdb_prompt$" { fail "delete bps" }
timeout { fail "delete bps (timeout)" }
}
}
-re ".*$gdb_prompt$" { fail "delete bps" }
timeout { fail "delete bps (timeout)" }
}
#
# break at first line of main.
#
send_gdb "break 22\n"
gdb_expect_list "break at main" "$gdb_prompt$" {
"\r\n\032\032post-prompt\r\n"
"Breakpoint.*at 0x\[a-z0-9\]+: file.*annota3.cc, line 22.\r\n"
}
#
# run program up to breakpoint.
#
send_gdb "run\n"
gdb_expect_list "second run until main breakpoint" "$gdb_prompt$" {
"\r\n\032\032post-prompt\r\n"
"\r\n\032\032starting\r\n"
"\r\n\032\032breakpoint 2\r\n"
"\r\n"
"Breakpoint 2, "
"\r\n\032\032frame-begin 0 0x\[0-9a-z\]+\r\n"
"main \\(\\) at .*annota3.cc:22\r\n"
"\r\n\032\032source.*annota3.cc:22:.*:beg:0x\[0-9a-z\]+\r\n"
"\r\n\032\032stopped\r\n"
}
#
# set up a watch point on a.x
#
send_gdb "watch a.x\n"
gdb_expect_list "set watch on a.x" "$gdb_prompt$" {
"\r\n\032\032post-prompt\r\n"
".*atchpoint 3: a.x\r\n" \
}
#
# do a next, so that the watchpoint triggers. This will test:
# annotate-watchpoint
#
gdb_test_multiple "next" "watch triggered on a.x" {
-re "\r\n\032\032post-prompt\r\n\r\n\032\032starting\r\n\r\n\032\032watchpoint 3\r\n.*atchpoint 3: a.x\r\n\r\nOld value = 0\r\nNew value = 1\r\n\r\n(\032\032frame-begin 0 0x\[0-9a-z\]+\r\n|)main \\(\\) at .*$srcfile:$decimal\r\n\r\n\032\032source .*$srcfile.*beg:$hex\r\n\r\n\032\032stopped\r\n.*$gdb_prompt$" {
pass "watch triggered on a.x"
}
-re "\r\n\032\032post-prompt\r\n\r\n\032\032starting\r\n\r\n\032\032source .*$srcfile.*beg:$hex\r\n\r\n\032\032stopped\r\n$gdb_prompt$" {
kfail "gdb/38" "watch triggered on a.x"
}
}
#
# send ^C to gdb, so that the quit() function gets called
# and annotate-quit is tested
# test:
# annotate-quit
#
send_gdb "\003"
gdb_expect_list "annotate-quit" "$gdb_prompt$" {
"\r\n\032\032error-begin\r\n"
"Quit\r\n"
"\r\n\032\032quit\r\n"
}
#
# FIXME: the testsuite does not currently have tests for
# annotate_catchpoints and annotate_function_call
# and a few variants of the annotations that are
# tested (marked by FIXME on the annot?.exp files)
#
# reinstall the old prompt for the rest of the testsuite.
set gdb_prompt $old_gdb_prompt