2001-10-08 Nick Clifton <nickc@cambridge.redhat.com> * sh64-opc.c: Regenerate. 2001-03-13 DJ Delorie <dj@redhat.com> * sh64-opc.h: Rename A_RESV_Fx to A_REUSE_PREV so that its purpose is more obvious. * sh64-opc.c (shmedia_table): Ditto. * sh64-dis.c (initialize_shmedia_opcode_mask_table): Ditto. (print_insn_shmedia): Ditto. 2001-03-12 DJ Delorie <dj@redhat.com> * sh64-opc.c: Adjust comments to reflect reality: replace bits 3:0 with zeros (not "reserved"), replace "rrrrrr" with "gggggg" for two-operand floating point opcodes. Remove "fsina". 2001-01-08 Hans-Peter Nilsson <hpn@cygnus.com> * sh64-dis.c (print_insn_shmedia) <failing read_memory_func>: Correct printing of .byte:s. Return number of printed bytes or -1; never 0. (print_insn_sh64x) <not CRT_SH5_ISA16>: Ditto. Print as .byte:s to next four-byte-alignment if insn or data is not aligned. 2001-01-06 Hans-Peter Nilsson <hpn@cygnus.com> * sh64-dis.c: Update comments and fix comment formatting. (initialize_shmedia_opcode_mask_table) <case A_IMMM>: Abort instead of setting length to 0. (crange_qsort_cmpb, crange_qsort_cmpl, crange_bsearch_cmpb, crange_bsearch_cmpl, sh64_get_contents_type, sh64_address_in_cranges): Move to bfd/elf32-sh64.c. 2001-01-05 Hans-Peter Nilsson <hpn@cygnus.com> * sh64-opc.c: Remove #if 0:d entries for instructions not found in SH-5/ST50-023-04: fcosa.s, fsrra.s and prefo. 2000-12-30 Hans-Peter Nilsson <hpn@cygnus.com> * sh64-dis.c (print_insn_shmedia): Display MOVI/SHORI-formed address with same prefix as SHcompact. In the disassembler, use a .cranges section for linked executables. * sh64-dis.c (SAVED_MOVI_R, SAVED_MOVI_IMM): Move to head of file and update for using structure in info->private_data. (struct sh64_disassemble_info): New. (is_shmedia_p): Delete. (crange_qsort_cmpb): New function. (crange_qsort_cmpl, crange_bsearch_cmpb): New functions. (crange_bsearch_cmpl, sh64_address_in_cranges): New functions. (init_sh64_disasm_info, sh64_get_contents_type_disasm): New functions. (sh64_get_contents_type, sh64_address_is_shmedia): New functions. (print_insn_shmedia): Correct displaying of address after MOVI/SHORI pair. Display addresses for linked executables only. (print_insn_sh64x_media): Initialize info->private_data by calling init_sh64_disasm_info. (print_insn_sh64x): Ditto. Find out type of contents by calling sh64_contents_type_disasm. Display data regions using ".long" and ".byte" similar to unrecognized opcodes. 2000-12-19 Hans-Peter Nilsson <hpn@cygnus.com> * sh64-dis.c (is_shmedia_p): Check info->section and look for ISA information in section flags before considering symbols. Don't assume an info->mach setting of bfd_mach_sh5 means SHmedia code. * configure.in (bfd_sh_arch): Check presence of sh64 insns by matching $target $canon_targets instead of looking at the now-removed -DINCLUDE_SHMEDIA in $targ_cflags. * configure: Regenerate. 2000-11-25 Hans-Peter Nilsson <hpn@cygnus.com> * sh64-opc.c (shmedia_creg_table): New. * sh64-opc.h (shmedia_creg_info): New type. (shmedia_creg_table): Declare. * sh64-dis.c (creg_name): New function. (print_insn_shmedia): Use it. * disassemble.c (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map bfd_mach_sh5 to print_insn_sh64 if big-endian and to print_insn_sh64l if little-endian. * sh64-dis.c (print_insn_shmedia): Make r unsigned. (print_insn_sh64l): New. (print_insn_sh64x): New. (print_insn_sh64x_media): New. (print_insn_sh64): Break out code to print_insn_sh64x and print_insn_sh64x_media. 2000-11-24 Hans-Peter Nilsson <hpn@cygnus.com> * sh64-opc.h: New file * sh64-opc.c: New file * sh64-dis.c: New file * Makefile.am: Add sh64 targets. (HFILES): Add sh64-opc.h. (CFILES): Add sh64-opc.c and sh64-dis.c. (ALL_MACHINES): Add sh64 files. * Makefile.in: Regenerate. * configure.in: Add support for sh64 to bfd_sh_arch. * configure: Regenerate. * disassemble.c [ARCH_all] (INCLUDE_SHMEDIA): Define. (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map bfd_mach_sh5 to print_insn_sh64. * sh-dis.c (print_insn_shx): Handle bfd_mach_sh5 as arch_sh4. * po/POTFILES.in: Regenerate. * po/opcodes.pot: Regenerate. |
||
---|---|---|
bfd | ||
binutils | ||
config | ||
etc | ||
gas | ||
gdb | ||
gprof | ||
include | ||
intl | ||
ld | ||
libiberty | ||
mmalloc | ||
opcodes | ||
readline | ||
sim | ||
texinfo | ||
.cvsignore | ||
COPYING | ||
COPYING.LIB | ||
COPYING.NEWLIB | ||
ChangeLog | ||
MAINTAINERS | ||
Makefile.in | ||
README | ||
README-maintainer-mode | ||
config-ml.in | ||
config.guess | ||
config.if | ||
config.sub | ||
configure | ||
configure.in | ||
djunpack.bat | ||
gettext.m4 | ||
install-sh | ||
libtool.m4 | ||
ltcf-c.sh | ||
ltcf-cxx.sh | ||
ltcf-gcj.sh | ||
ltconfig | ||
ltmain.sh | ||
makefile.vms | ||
missing | ||
mkdep | ||
mkinstalldirs | ||
move-if-change | ||
mpw-README | ||
mpw-build.in | ||
mpw-config.in | ||
mpw-configure | ||
mpw-install | ||
setup.com | ||
symlink-tree | ||
ylwrap |
README
README for GNU development tools This directory contains various GNU compilers, assemblers, linkers, debuggers, etc., plus their support routines, definitions, and documentation. If you are receiving this as part of a GDB release, see the file gdb/README. If with a binutils release, see binutils/README; if with a libg++ release, see libg++/README, etc. That'll give you info about this package -- supported targets, how to use it, how to report bugs, etc. It is now possible to automatically configure and build a variety of tools with one command. To build all of the tools contained herein, run the ``configure'' script here, e.g.: ./configure make To install them (by default in /usr/local/bin, /usr/local/lib, etc), then do: make install (If the configure script can't determine your type of computer, give it the name as an argument, for instance ``./configure sun4''. You can use the script ``config.sub'' to test whether a name is recognized; if it is, config.sub translates it to a triplet specifying CPU, vendor, and OS.) If you have more than one compiler on your system, it is often best to explicitly set CC in the environment before running configure, and to also set CC when running make. For example (assuming sh/bash/ksh): CC=gcc ./configure make A similar example using csh: setenv CC gcc ./configure make Much of the code and documentation enclosed is copyright by the Free Software Foundation, Inc. See the file COPYING or COPYING.LIB in the various directories, for a description of the GNU General Public License terms under which you can copy the files. REPORTING BUGS: Again, see gdb/README, binutils/README, etc., for info on where and how to report problems.